Index: 1.1.1r-ppc32/openssl-x32-pkg-install.sh
===================================================================
--- 1.1.1r-ppc32/openssl-x32-pkg-install.sh (.../openssl) (revision 419)
+++ 1.1.1r-ppc32/openssl-x32-pkg-install.sh (.../openssl11) (nonexistent)
@@ -1,39 +0,0 @@
-#!/bin/sh
-
-# arg 1: the new package version
-pre_install() {
- /bin/true
-}
-
-# arg 1: the new package version
-post_install() {
- /bin/true
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-pre_update() {
- /bin/true
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-post_update() {
- post_install
-}
-
-# arg 1: the old package version
-pre_remove() {
- /bin/true
-}
-
-# arg 1: the old package version
-post_remove() {
- /bin/true
-}
-
-
-operation=$1
-shift
-
-$operation $*
Property changes on: 1.1.1r-ppc32/openssl-x32-pkg-install.sh
___________________________________________________________________
Deleted: svn:executable
## -1 +0,0 ##
-*
\ No newline at end of property
Index: 1.1.1r-ppc32/openssl-x32-pkg-description.in
===================================================================
--- 1.1.1r-ppc32/openssl-x32-pkg-description.in (.../openssl) (revision 419)
+++ 1.1.1r-ppc32/openssl-x32-pkg-description.in (.../openssl11) (nonexistent)
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
-# make exactly 11 lines for the formatting to be correct. It's also
-# customary to leave one space after the ':'.
-
- |-----handy-ruler------------------------------------------------------|
-openssl-x32: openssl-x32 @VERSION@ (Secure Sockets Layer toolkit)
-openssl-x32:
-openssl-x32: The OpenSSL certificate management tool and the shared libraries
-openssl-x32: that provide various encryption and decryption algorithms and
-openssl-x32: protocols.
-openssl-x32: This product includes software developed by the OpenSSL Project for
-openssl-x32: use in the OpenSSL Toolkit (http://www.openssl.org). This product
-openssl-x32: includes cryptographic software written by Eric Young
-openssl-x32: (eay@cryptsoft.com). This product includes software written by Tim
-openssl-x32: Hudson (tjh@cryptsoft.com).
-openssl-x32:
Index: 1.1.1r-ppc32/Makefile
===================================================================
--- 1.1.1r-ppc32/Makefile (.../openssl) (revision 419)
+++ 1.1.1r-ppc32/Makefile (.../openssl11) (nonexistent)
@@ -1,190 +0,0 @@
-
-COMPONENT_TARGETS = $(HARDWARE_S824L)
-COMPONENT_TARGETS += $(HARDWARE_VESNIN)
-COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
-COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
-
-NEED_ABS_PATH = true
-COMPONENT_IS_3PP = true
-
-CREATE_PPC32_PACKAGE = true
-
-
-include ../../../build-system/constants.mk
-
-
-SOURCE_REQUIRES = sources/packages/n/openssl
-
-REQUIRES = net/openssl/1.1.1r
-REQUIRES += libs/zlib/1.3.1-ppc32
-REQUIRES += libs/gmp/6.3.0-ppc32
-
-# ======= __END_OF_REQUIRES__ =======
-
-
-version = 1.1.1r
-tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/n/openssl/openssl-$(version).tar.xz
-SRC_ARCHIVE = $(tar_xz_archive)
-SRC_DIR = $(TARGET_BUILD_DIR)/openssl-$(version)
-src_dir_name = openssl-$(version)
-src_done = $(TARGET_BUILD_DIR)/.source_done
-
-PATCHES = PATCHES
-
-build_dir = $(TARGET_BUILD_DIR)/build
-build_target = $(TARGET_BUILD_DIR)/.build_done
-install_target = $(TARGET_BUILD_DIR)/.install_done
-
-
-####### Targets
-
-PKG_GROUP = net
-#
-# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
-#
-OPENSSL32_PKG_NAME = openssl-x32
-OPENSSL32_PKG_VERSION = 1.1.1r
-OPENSSL32_PKG_ARCH = $(PKGARCH)
-OPENSSL32_PKG_DISTRO_NAME = $(DISTRO_NAME)
-OPENSSL32_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
-OPENSSL32_PKG_GROUP = $(PKG_GROUP)
-### |---handy-ruler-------------------------------|
-OPENSSL32_PKG_SHORT_DESCRIPTION = Secure Sockets Layer toolkit
-OPENSSL32_PKG_URL = $(BUG_URL)
-OPENSSL32_PKG_LICENSE = GPLv2
-OPENSSL32_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(OPENSSL32_PKG_NAME)-pkg-description
-OPENSSL32_PKG_DESCRIPTION_FILE_IN = $(OPENSSL32_PKG_NAME)-pkg-description.in
-OPENSSL32_PKG_INSTALL_SCRIPT = $(OPENSSL32_PKG_NAME)-pkg-install.sh
-
-OPENSSL32_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(OPENSSL32_PKG_NAME)-package
-
-pkg_basename = $(OPENSSL32_PKG_NAME)-$(OPENSSL32_PKG_VERSION)-$(OPENSSL32_PKG_ARCH)-$(OPENSSL32_PKG_DISTRO_NAME)-$(OPENSSL32_PKG_DISTRO_VERSION)
-
-pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
-pkg_certificate = $(call cert-name,$(pkg_archive))
-pkg_signature = $(call sign-name,$(pkg_archive))
-pkg_description = $(call desc-name,$(pkg_archive))
-products = $(call pkg-files,$(pkg_archive))
-
-BUILD_TARGETS = $(build_target)
-BUILD_TARGETS += $(install_target)
-
-PRODUCT_TARGETS = $(products)
-
-ROOTFS_TARGETS = $(pkg_archive)
-
-
-include ../../../build-system/core.mk
-
-
-env_sysroot = DESTDIR=$(OPENSSL32_PKG)
-
-
-extra_configure_switches = --libdir=lib$(MULTILIB_PPC32_SUFFIX)
-extra_configure_switches += --openssldir=/etc/ssl
-extra_configure_switches += no-mdc2
-extra_configure_switches += no-ec2m
-extra_configure_switches += no-idea
-extra_configure_switches += no-sse2
-extra_configure_switches += enable-camellia
-extra_configure_switches += enable-seed
-extra_configure_switches += enable-rfc3779
-extra_configure_switches += enable-cms
-extra_configure_switches += enable-md2
-extra_configure_switches += enable-rc5
-extra_configure_switches += enable-ssl3
-extra_configure_switches += enable-ssl3-method
-extra_configure_switches += no-weak-ssl-ciphers
-extra_configure_switches += zlib
-extra_configure_switches += shared
-
-openssl_environment = KERNEL_BITS=32 MACHINE=ppc64 SYSTEM=Linux
-openssl_environment += LDFLAGS=-Wl,-rpath=/lib$(MULTILIB_PPC32_SUFFIX):/usr/lib$(MULTILIB_PPC32_SUFFIX)
-
-
-####### Dependencies
-
-$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
- $(UNPACK_SRC_ARCHIVE)
- $(APPLY_PATCHES)
- @( cd $(SRC_DIR) ; \
- find . -name "*.pod" -exec sed -i "s/^\=item \([0-9]\)\(\ \|\.\|$$\)/\=item C<\1>/g" {} \; \
- )
- @( cd $(SRC_DIR) ; \
- sed -i "/linux-elf/s/fomit-frame-pointer/fomit-frame-pointer -march=i686 -mtune=i686/g" Configure ; \
- )
- @touch $@
-
-$(build_target): $(src_done)
- @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(openssl_environment) ./config \
- --prefix=/usr \
- $(extra_configure_switches) \
- $(ARCH_FLAGS) \
- $(HW_FLAGS)
- @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE)
- @touch $@
-
-$(install_target): $(build_target)
- @mkdir -p $(OPENSSL32_PKG)
- @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 MANDIR=/usr/share/man install $(env_sysroot)
-ifneq ($(__ENABLE_STATIC__),yes)
- @rm -f $(OPENSSL32_PKG)/usr/lib$(MULTILIB_PPC32_SUFFIX)/*.a
-endif
- @mkdir -p $(OPENSSL32_PKG)/usr/bin/32
- @( cd $(OPENSSL32_PKG)/usr/bin ; \
- rm -f c_rehash ; \
- find . -type f | xargs mv -t 32 ; \
- )
- @mkdir -p $(OPENSSL32_PKG)/lib$(MULTILIB_PPC32_SUFFIX)
- @( cd $(OPENSSL32_PKG)/usr/lib$(MULTILIB_PPC32_SUFFIX) ; \
- chmod +w lib*.so.?.? ; \
- mv lib*.so.?.? ../../lib$(MULTILIB_PPC32_SUFFIX) ; \
- ln -sf ../../lib$(MULTILIB_PPC32_SUFFIX)/lib*.so.?.? . ; \
- ln -sf libcrypto.so.?.? libcrypto.so.1 ; \
- ln -sf libssl.so.?.? libssl.so.1 ; \
- cp -a lib*.so.? ../../lib$(MULTILIB_PPC32_SUFFIX) ; \
- )
- @rm -rf $(OPENSSL32_PKG)/etc
- @rm -rf $(OPENSSL32_PKG)/usr/include
- @rm -rf $(OPENSSL32_PKG)/usr/share
- # ======= Install the same to $(TARGET_DEST_DIR) =======
- $(call install-into-devenv, $(OPENSSL32_PKG))
- # ======= tune pkg-config *.pc search path to the target destination for development =======
- @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_PPC32_SUFFIX)/pkgconfig ; \
- sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libcrypto.pc libssl.pc openssl.pc \
- )
- # ======= Strip binaries =======
- @( cd $(OPENSSL32_PKG) ; \
- find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
- find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
- )
-ifeq ($(__ENABLE_STATIC__),yes)
- @( cd $(OPENSSL32_PKG) ; \
- find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
- )
-endif
- @touch $@
-
-$(OPENSSL32_PKG_DESCRIPTION_FILE): $(OPENSSL32_PKG_DESCRIPTION_FILE_IN)
- @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
-
-$(pkg_certificate) : $(pkg_archive) ;
-$(pkg_signature) : $(pkg_archive) ;
-$(pkg_description) : $(pkg_archive) ;
-
-$(pkg_archive): $(install_target) $(OPENSSL32_PKG_DESCRIPTION_FILE) $(OPENSSL32_PKG_INSTALL_SCRIPT)
- @cp $(OPENSSL32_PKG_DESCRIPTION_FILE) $(OPENSSL32_PKG)/.DESCRIPTION
- @cp $(OPENSSL32_PKG_INSTALL_SCRIPT) $(OPENSSL32_PKG)/.INSTALL
- @$(BUILD_PKG_REQUIRES) $(OPENSSL32_PKG)/.REQUIRES
- @echo "pkgname=$(OPENSSL32_PKG_NAME)" > $(OPENSSL32_PKG)/.PKGINFO ; \
- echo "pkgver=$(OPENSSL32_PKG_VERSION)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
- echo "arch=$(OPENSSL32_PKG_ARCH)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
- echo "distroname=$(OPENSSL32_PKG_DISTRO_NAME)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
- echo "distrover=$(OPENSSL32_PKG_DISTRO_VERSION)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
- echo "group=$(OPENSSL32_PKG_GROUP)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
- echo "short_description=\"$(OPENSSL32_PKG_SHORT_DESCRIPTION)\"" >> $(OPENSSL32_PKG)/.PKGINFO ; \
- echo "url=$(OPENSSL32_PKG_URL)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
- echo "license=$(OPENSSL32_PKG_LICENSE)" >> $(OPENSSL32_PKG)/.PKGINFO
- @$(PSEUDO) sh -c "cd $(OPENSSL32_PKG) && \
- chown -R root:root . && \
- $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 1.1.1r-ppc32
===================================================================
--- 1.1.1r-ppc32 (.../openssl) (revision 419)
+++ 1.1.1r-ppc32 (.../openssl11) (nonexistent)
Property changes on: 1.1.1r-ppc32
___________________________________________________________________
Deleted: svn:ignore
## -1,74 +0,0 ##
-
-# install dir
-dist
-
-# Target build dirs
-.a1x-newlib
-.a2x-newlib
-.at91sam7s-newlib
-
-.build-machine
-
-.a1x-glibc
-.a2x-glibc
-.h3-glibc
-.h5-glibc
-.i586-glibc
-.i686-glibc
-.imx6-glibc
-.jz47xx-glibc
-.makefile
-.am335x-glibc
-.omap543x-glibc
-.p5600-glibc
-.power8-glibc
-.power8le-glibc
-.power9-glibc
-.power9le-glibc
-.m1000-glibc
-.riscv64-glibc
-.rk328x-glibc
-.rk33xx-glibc
-.rk339x-glibc
-.rk358x-glibc
-.s8xx-glibc
-.s9xx-glibc
-.x86_64-glibc
-
-# Hidden files (each file)
-.makefile
-.dist
-.rootfs
-
-# src & hw requires
-.src_requires
-.src_requires_depend
-.requires
-.requires_depend
-
-# Tarballs
-*.gz
-*.bz2
-*.lz
-*.xz
-*.tgz
-*.txz
-
-# Signatures
-*.asc
-*.sig
-*.sign
-*.sha1sum
-
-# Patches
-*.patch
-
-# Descriptions
-*.dsc
-*.txt
-
-# Default linux config files
-*.defconfig
-
-# backup copies
-*~
Index: 1.1.1r-x86_32/openssl-x32-pkg-install.sh
===================================================================
--- 1.1.1r-x86_32/openssl-x32-pkg-install.sh (.../openssl) (revision 419)
+++ 1.1.1r-x86_32/openssl-x32-pkg-install.sh (.../openssl11) (nonexistent)
@@ -1,39 +0,0 @@
-#!/bin/sh
-
-# arg 1: the new package version
-pre_install() {
- /bin/true
-}
-
-# arg 1: the new package version
-post_install() {
- /bin/true
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-pre_update() {
- /bin/true
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-post_update() {
- post_install
-}
-
-# arg 1: the old package version
-pre_remove() {
- /bin/true
-}
-
-# arg 1: the old package version
-post_remove() {
- /bin/true
-}
-
-
-operation=$1
-shift
-
-$operation $*
Property changes on: 1.1.1r-x86_32/openssl-x32-pkg-install.sh
___________________________________________________________________
Deleted: svn:executable
## -1 +0,0 ##
-*
\ No newline at end of property
Index: 1.1.1r-x86_32/openssl-x32-pkg-description.in
===================================================================
--- 1.1.1r-x86_32/openssl-x32-pkg-description.in (.../openssl) (revision 419)
+++ 1.1.1r-x86_32/openssl-x32-pkg-description.in (.../openssl11) (nonexistent)
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
-# make exactly 11 lines for the formatting to be correct. It's also
-# customary to leave one space after the ':'.
-
- |-----handy-ruler------------------------------------------------------|
-openssl-x32: openssl-x32 @VERSION@ (Secure Sockets Layer toolkit)
-openssl-x32:
-openssl-x32: The OpenSSL certificate management tool and the shared libraries
-openssl-x32: that provide various encryption and decryption algorithms and
-openssl-x32: protocols.
-openssl-x32: This product includes software developed by the OpenSSL Project for
-openssl-x32: use in the OpenSSL Toolkit (http://www.openssl.org). This product
-openssl-x32: includes cryptographic software written by Eric Young
-openssl-x32: (eay@cryptsoft.com). This product includes software written by Tim
-openssl-x32: Hudson (tjh@cryptsoft.com).
-openssl-x32:
Index: 1.1.1r-x86_32/Makefile
===================================================================
--- 1.1.1r-x86_32/Makefile (.../openssl) (revision 419)
+++ 1.1.1r-x86_32/Makefile (.../openssl11) (nonexistent)
@@ -1,184 +0,0 @@
-
-COMPONENT_TARGETS = $(HARDWARE_INTEL_PC64)
-
-NEED_ABS_PATH = true
-COMPONENT_IS_3PP = true
-
-CREATE_X86_32_PACKAGE = true
-
-
-include ../../../build-system/constants.mk
-
-
-SOURCE_REQUIRES = sources/packages/n/openssl
-
-REQUIRES = net/openssl/1.1.1r
-REQUIRES += libs/zlib/1.3.1-x86_32
-REQUIRES += libs/gmp/6.3.0-x86_32
-
-# ======= __END_OF_REQUIRES__ =======
-
-
-version = 1.1.1r
-tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/n/openssl/openssl-$(version).tar.xz
-SRC_ARCHIVE = $(tar_xz_archive)
-SRC_DIR = $(TARGET_BUILD_DIR)/openssl-$(version)
-src_dir_name = openssl-$(version)
-src_done = $(TARGET_BUILD_DIR)/.source_done
-
-PATCHES = PATCHES
-
-build_dir = $(TARGET_BUILD_DIR)/build
-build_target = $(TARGET_BUILD_DIR)/.build_done
-install_target = $(TARGET_BUILD_DIR)/.install_done
-
-
-####### Targets
-
-PKG_GROUP = net
-#
-# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
-#
-OPENSSL32_PKG_NAME = openssl-x32
-OPENSSL32_PKG_VERSION = 1.1.1r
-OPENSSL32_PKG_ARCH = $(PKGARCH)
-OPENSSL32_PKG_DISTRO_NAME = $(DISTRO_NAME)
-OPENSSL32_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
-OPENSSL32_PKG_GROUP = $(PKG_GROUP)
-### |---handy-ruler-------------------------------|
-OPENSSL32_PKG_SHORT_DESCRIPTION = Secure Sockets Layer toolkit
-OPENSSL32_PKG_URL = $(BUG_URL)
-OPENSSL32_PKG_LICENSE = GPLv2
-OPENSSL32_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(OPENSSL32_PKG_NAME)-pkg-description
-OPENSSL32_PKG_DESCRIPTION_FILE_IN = $(OPENSSL32_PKG_NAME)-pkg-description.in
-OPENSSL32_PKG_INSTALL_SCRIPT = $(OPENSSL32_PKG_NAME)-pkg-install.sh
-
-OPENSSL32_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(OPENSSL32_PKG_NAME)-package
-
-pkg_basename = $(OPENSSL32_PKG_NAME)-$(OPENSSL32_PKG_VERSION)-$(OPENSSL32_PKG_ARCH)-$(OPENSSL32_PKG_DISTRO_NAME)-$(OPENSSL32_PKG_DISTRO_VERSION)
-
-pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
-pkg_certificate = $(call cert-name,$(pkg_archive))
-pkg_signature = $(call sign-name,$(pkg_archive))
-pkg_description = $(call desc-name,$(pkg_archive))
-products = $(call pkg-files,$(pkg_archive))
-
-BUILD_TARGETS = $(build_target)
-BUILD_TARGETS += $(install_target)
-
-PRODUCT_TARGETS = $(products)
-
-ROOTFS_TARGETS = $(pkg_archive)
-
-
-include ../../../build-system/core.mk
-
-
-env_sysroot = DESTDIR=$(OPENSSL32_PKG)
-
-
-extra_configure_switches = --libdir=lib$(MULTILIB_X86_32_SUFFIX)
-extra_configure_switches += --openssldir=/etc/ssl
-extra_configure_switches += no-mdc2
-extra_configure_switches += no-ec2m
-extra_configure_switches += no-idea
-extra_configure_switches += no-sse2
-extra_configure_switches += enable-camellia
-extra_configure_switches += enable-seed
-extra_configure_switches += enable-rfc3779
-extra_configure_switches += enable-cms
-extra_configure_switches += enable-md2
-extra_configure_switches += enable-rc5
-extra_configure_switches += enable-ssl3
-extra_configure_switches += enable-ssl3-method
-extra_configure_switches += no-weak-ssl-ciphers
-extra_configure_switches += zlib
-extra_configure_switches += shared
-
-openssl_environment = MACHINE=i686 SYSTEM=Linux
-openssl_environment += LDFLAGS=-Wl,-rpath=/lib$(MULTILIB_X86_32_SUFFIX):/usr/lib$(MULTILIB_X86_32_SUFFIX)
-
-
-####### Dependencies
-
-$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
- $(UNPACK_SRC_ARCHIVE)
- $(APPLY_PATCHES)
- @( cd $(SRC_DIR) ; \
- find . -name "*.pod" -exec sed -i "s/^\=item \([0-9]\)\(\ \|\.\|$$\)/\=item C<\1>/g" {} \; \
- )
- @touch $@
-
-$(build_target): $(src_done)
- @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(openssl_environment) ./config \
- --prefix=/usr \
- $(extra_configure_switches) \
- $(ARCH_FLAGS) \
- $(HW_FLAGS)
- @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE)
- @touch $@
-
-$(install_target): $(build_target)
- @mkdir -p $(OPENSSL32_PKG)
- @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 MANDIR=/usr/share/man install $(env_sysroot)
-ifneq ($(__ENABLE_STATIC__),yes)
- @rm -f $(OPENSSL32_PKG)/usr/lib$(MULTILIB_X86_32_SUFFIX)/*.a
-endif
- @mkdir -p $(OPENSSL32_PKG)/usr/bin/32
- @( cd $(OPENSSL32_PKG)/usr/bin ; \
- rm -f c_rehash ; \
- find . -type f | xargs mv -t 32 ; \
- )
- @mkdir -p $(OPENSSL32_PKG)/lib$(MULTILIB_X86_32_SUFFIX)
- @( cd $(OPENSSL32_PKG)/usr/lib$(MULTILIB_X86_32_SUFFIX) ; \
- chmod +w lib*.so.?.? ; \
- mv lib*.so.?.? ../../lib$(MULTILIB_X86_32_SUFFIX) ; \
- ln -sf ../../lib$(MULTILIB_X86_32_SUFFIX)/lib*.so.?.? . ; \
- ln -sf libcrypto.so.?.? libcrypto.so.1 ; \
- ln -sf libssl.so.?.? libssl.so.1 ; \
- cp -a lib*.so.? ../../lib$(MULTILIB_X86_32_SUFFIX) ; \
- )
- @rm -rf $(OPENSSL32_PKG)/etc
- @rm -rf $(OPENSSL32_PKG)/usr/include
- @rm -rf $(OPENSSL32_PKG)/usr/share
- # ======= Install the same to $(TARGET_DEST_DIR) =======
- $(call install-into-devenv, $(OPENSSL32_PKG))
- # ======= tune pkg-config *.pc search path to the target destination for development =======
- @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_X86_32_SUFFIX)/pkgconfig ; \
- sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libcrypto.pc libssl.pc openssl.pc \
- )
- # ======= Strip binaries =======
- @( cd $(OPENSSL32_PKG) ; \
- find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
- find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
- )
-ifeq ($(__ENABLE_STATIC__),yes)
- @( cd $(OPENSSL32_PKG) ; \
- find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
- )
-endif
- @touch $@
-
-$(OPENSSL32_PKG_DESCRIPTION_FILE): $(OPENSSL32_PKG_DESCRIPTION_FILE_IN)
- @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
-
-$(pkg_certificate) : $(pkg_archive) ;
-$(pkg_signature) : $(pkg_archive) ;
-$(pkg_description) : $(pkg_archive) ;
-
-$(pkg_archive): $(install_target) $(OPENSSL32_PKG_DESCRIPTION_FILE) $(OPENSSL32_PKG_INSTALL_SCRIPT)
- @cp $(OPENSSL32_PKG_DESCRIPTION_FILE) $(OPENSSL32_PKG)/.DESCRIPTION
- @cp $(OPENSSL32_PKG_INSTALL_SCRIPT) $(OPENSSL32_PKG)/.INSTALL
- @$(BUILD_PKG_REQUIRES) $(OPENSSL32_PKG)/.REQUIRES
- @echo "pkgname=$(OPENSSL32_PKG_NAME)" > $(OPENSSL32_PKG)/.PKGINFO ; \
- echo "pkgver=$(OPENSSL32_PKG_VERSION)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
- echo "arch=$(OPENSSL32_PKG_ARCH)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
- echo "distroname=$(OPENSSL32_PKG_DISTRO_NAME)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
- echo "distrover=$(OPENSSL32_PKG_DISTRO_VERSION)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
- echo "group=$(OPENSSL32_PKG_GROUP)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
- echo "short_description=\"$(OPENSSL32_PKG_SHORT_DESCRIPTION)\"" >> $(OPENSSL32_PKG)/.PKGINFO ; \
- echo "url=$(OPENSSL32_PKG_URL)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
- echo "license=$(OPENSSL32_PKG_LICENSE)" >> $(OPENSSL32_PKG)/.PKGINFO
- @$(PSEUDO) sh -c "cd $(OPENSSL32_PKG) && \
- chown -R root:root . && \
- $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 1.1.1r-x86_32
===================================================================
--- 1.1.1r-x86_32 (.../openssl) (revision 419)
+++ 1.1.1r-x86_32 (.../openssl11) (nonexistent)
Property changes on: 1.1.1r-x86_32
___________________________________________________________________
Deleted: svn:ignore
## -1,74 +0,0 ##
-
-# install dir
-dist
-
-# Target build dirs
-.a1x-newlib
-.a2x-newlib
-.at91sam7s-newlib
-
-.build-machine
-
-.a1x-glibc
-.a2x-glibc
-.h3-glibc
-.h5-glibc
-.i586-glibc
-.i686-glibc
-.imx6-glibc
-.jz47xx-glibc
-.makefile
-.am335x-glibc
-.omap543x-glibc
-.p5600-glibc
-.power8-glibc
-.power8le-glibc
-.power9-glibc
-.power9le-glibc
-.m1000-glibc
-.riscv64-glibc
-.rk328x-glibc
-.rk33xx-glibc
-.rk339x-glibc
-.rk358x-glibc
-.s8xx-glibc
-.s9xx-glibc
-.x86_64-glibc
-
-# Hidden files (each file)
-.makefile
-.dist
-.rootfs
-
-# src & hw requires
-.src_requires
-.src_requires_depend
-.requires
-.requires_depend
-
-# Tarballs
-*.gz
-*.bz2
-*.lz
-*.xz
-*.tgz
-*.txz
-
-# Signatures
-*.asc
-*.sig
-*.sign
-*.sha1sum
-
-# Patches
-*.patch
-
-# Descriptions
-*.dsc
-*.txt
-
-# Default linux config files
-*.defconfig
-
-# backup copies
-*~
Index: 1.1.1r/openssl-pkg-install.sh
===================================================================
--- 1.1.1r/openssl-pkg-install.sh (.../openssl) (revision 419)
+++ 1.1.1r/openssl-pkg-install.sh (.../openssl11) (nonexistent)
@@ -1,67 +0,0 @@
-#!/bin/sh
-
-# Preserve new files
-install_file() {
- NEW="$1"
- OLD="`dirname $NEW`/`basename $NEW .new`"
- # If there's no file by that name, mv it over:
- if [ ! -r $OLD ]; then
- mv $NEW $OLD
- elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
- rm $NEW
- fi
- # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-
-# arg 1: the new package version
-pre_install() {
- /bin/true
-}
-
-# arg 1: the new package version
-post_install() {
- # If there is a known buggy certwatch script with no local modifications, just replace it:
- if [ "$(md5sum etc/cron.daily/certwatch 2> /dev/null)" = "f4cf63e557820781f40c4cac67a44d77 etc/cron.daily/certwatch" ]; then
- cat etc/cron.daily/certwatch.new > etc/cron.daily/certwatch
- touch -r etc/cron.daily/certwatch.new etc/cron.daily/certwatch
- fi
-
- install_file etc/ssl/openssl.cnf.new
- install_file etc/cron.daily/certwatch.new
-
- # Rehash certificates if the package is upgraded on a running system:
- # Note that we have to be sure that we are on the working system
- # on the target hardware ("proc/sys/kernel/osrelease" - relative path).
- if [ -r proc/sys/kernel/osrelease -a -x /usr/bin/c_rehash ]; then
- /usr/bin/c_rehash 1> /dev/null 2> /dev/null
- fi
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-pre_update() {
- /bin/true
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-post_update() {
- post_install
-}
-
-# arg 1: the old package version
-pre_remove() {
- /bin/true
-}
-
-# arg 1: the old package version
-post_remove() {
- /bin/true
-}
-
-
-operation=$1
-shift
-
-$operation $*
Property changes on: 1.1.1r/openssl-pkg-install.sh
___________________________________________________________________
Deleted: svn:executable
## -1 +0,0 ##
-*
\ No newline at end of property
Index: 1.1.1r/cron/certwatch
===================================================================
--- 1.1.1r/cron/certwatch (.../openssl) (revision 419)
+++ 1.1.1r/cron/certwatch (.../openssl11) (nonexistent)
@@ -1,129 +0,0 @@
-#!/bin/sh
-#
-# Will check all certificates stored in $CERTDIR for their expiration date,
-# and will display (if optional "stdout" argument is given), or mail a warning
-# message to $MAILADDR (if script is executed without any parameter
-# - unattended mode suitable for cron execution) for each particular certificate
-# that is about to expire in time less to, or equal to $DAYS after this script
-# has been executed, or if it has already expired.
-# This stupid script (C) 2006,2007 Jan Rafaj
-
-########################## CONFIGURATION SECTION BEGIN #########################
-# Note: all settings are mandatory
-# Warning will be sent if a certificate expires in time <= days given here
-DAYS=7
-# E-mail address where to send warnings
-MAILADDR=root
-# Directory with certificates to check
-CERTDIR=/etc/ssl/certs
-# Directory where to keep state files if this script isnt executed with "stdout"
-STATEDIR=/var/run
-########################### CONFIGURATION SECTION END ##########################
-
-PATH=/bin:/usr/bin:/sbin:/usr/sbin
-DAY_IN_SECS=$((60*60*24))
-DATE_CURRENT=$(date '+%s')
-
-usage()
-{
- echo "Usage: $0 [stdout]"
- echo
- echo "Detailed description and configuration is embedded within the script."
- exit 0
-}
-
-message()
-{
- cat << EOF
- WARNING: certificate $certfile
- is about to expire in time equal to or less than $DAYS days from now on,
- or has already expired - it might be a good idea to obtain/create new one.
-
-EOF
-}
-
-message_mail()
-{
- message
- cat << EOF
- NOTE: This message is being sent only once.
-
- A lock-file
- $STATEDIR/certwatch-mailwarning-sent-$certfilebase
- has been created, which will prevent this script from mailing you again
- upon its subsequent executions by crond. You dont need to care about it;
- the file will be auto-deleted as soon as you'll prolong your certificate.
-EOF
-}
-
-unset stdout
-case $# in
- 0) ;;
- 1) if [ "$1" = "-h" -o "$1" == "--help" ]; then
- usage
- elif [ "$1" = "stdout" ]; then
- stdout=1
- else
- usage
- fi
- ;;
- *) usage ;;
-esac
-
-for dir in $STATEDIR $CERTDIR ; do
- if [ ! -d $dir ]; then
- echo "ERROR: directory $dir does not exist"
- exit 1
- fi
-done
-for binary in basename date find grep mail openssl touch ; do
- if [ ! \( -x /usr/bin/$binary -o -x /bin/$binary \) ]; then
- echo "ERROR: /usr/bin/$binary not found"
- exit 1
- fi
-done
-
-find $CERTDIR -type f -maxdepth 1 | while read certfile ; do
- if [ "$certfile" != "/etc/ssl/certs/ca-certificates.crt" ]; then
- certfilebase="$(basename "$certfile")"
- inform=PEM
- echo "$certfile" | grep -q -i '\.net$'
- if [ $? -eq 0 ]; then
- # This is based purely on filename extension, so may give false results.
- # But lets assume noone uses NET format certs today, ok?
- continue
- fi
- echo "$certfile" | grep -q -i '\.der$'
- if [ $? -eq 0 -o "$(file "$certfile" | egrep '(ASCII|PEM)')" == "" ]; then
- inform=DER
- fi
- # We wont use '-checkend' since it is not properly documented (as of
- # OpenSSL 0.9.8e).
- DATE_CERT_EXPIRES=$(openssl x509 -in "$certfile" -inform $inform -noout -enddate | sed 's/^notAfter=//')
- DATE_CERT_EXPIRES=$(date -d"$DATE_CERT_EXPIRES" +%s)
- if [ $(($DATE_CERT_EXPIRES - $DATE_CURRENT)) -le $(($DAYS * $DAY_IN_SECS)) ]
- then
- if [ $stdout ]; then
- message
- else
- if [ ! -f $STATEDIR/certwatch-mailwarning-sent-"$certfilebase" ]; then
- subject="$0: certificate $certfile expiration warning"
- message_mail | mail -r "certwatch@$HOSTNAME" \
- -s "$subject" \
- $MAILADDR 2>/dev/null
- # echo "Mail about expiring certificate $certfile sent to $MAILADDR."
- # echo "If you need to send it again, please remove lock-file"
- # echo "$STATEDIR/certwatch-mailwarning-sent-$certfilebase ."
- # echo
- fi
- touch $STATEDIR/certwatch-mailwarning-sent-"$certfilebase"
- fi
- else
- if [ ! $stdout ]; then
- if [ -f $STATEDIR/certwatch-mailwarning-sent-"$certfilebase" ]; then
- rm $STATEDIR/certwatch-mailwarning-sent-"$certfilebase"
- fi
- fi
- fi
- fi
-done
Index: 1.1.1r/cron
===================================================================
--- 1.1.1r/cron (.../openssl) (revision 419)
+++ 1.1.1r/cron (.../openssl11) (nonexistent)
Property changes on: 1.1.1r/cron
___________________________________________________________________
Deleted: svn:ignore
## -1,73 +0,0 ##
-
-# install dir
-dist
-
-# Target build dirs
-.a1x-newlib
-.a2x-newlib
-.at91sam7s-newlib
-
-.build-machine
-
-.a1x-glibc
-.a2x-glibc
-.h3-glibc
-.h5-glibc
-.i586-glibc
-.i686-glibc
-.imx6-glibc
-.jz47xx-glibc
-.makefile
-.am335x-glibc
-.omap543x-glibc
-.p5600-glibc
-.power8-glibc
-.power8le-glibc
-.power9-glibc
-.power9le-glibc
-.m1000-glibc
-.riscv64-glibc
-.rk328x-glibc
-.rk33xx-glibc
-.rk339x-glibc
-.s8xx-glibc
-.s9xx-glibc
-.x86_64-glibc
-
-# Hidden files (each file)
-.makefile
-.dist
-.rootfs
-
-# src & hw requires
-.src_requires
-.src_requires_depend
-.requires
-.requires_depend
-
-# Tarballs
-*.gz
-*.bz2
-*.lz
-*.xz
-*.tgz
-*.txz
-
-# Signatures
-*.asc
-*.sig
-*.sign
-*.sha1sum
-
-# Patches
-*.patch
-
-# Descriptions
-*.dsc
-*.txt
-
-# Default linux config files
-*.defconfig
-
-# backup copies
-*~
Index: 1.1.1r/openssl-pkg-description.in
===================================================================
--- 1.1.1r/openssl-pkg-description.in (.../openssl) (revision 419)
+++ 1.1.1r/openssl-pkg-description.in (.../openssl11) (nonexistent)
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
-# make exactly 11 lines for the formatting to be correct. It's also
-# customary to leave one space after the ':'.
-
- |-----handy-ruler------------------------------------------------------|
-openssl: openssl @VERSION@ (Secure Sockets Layer toolkit)
-openssl:
-openssl: The OpenSSL certificate management tool and the shared libraries
-openssl: that provide various encryption and decryption algorithms and
-openssl: protocols.
-openssl: This product includes software developed by the OpenSSL Project for
-openssl: use in the OpenSSL Toolkit (http://www.openssl.org). This product
-openssl: includes cryptographic software written by Eric Young
-openssl: (eay@cryptsoft.com). This product includes software written by Tim
-openssl: Hudson (tjh@cryptsoft.com).
-openssl:
Index: 1.1.1r/Makefile
===================================================================
--- 1.1.1r/Makefile (.../openssl) (revision 419)
+++ 1.1.1r/Makefile (.../openssl11) (nonexistent)
@@ -1,330 +0,0 @@
-
-COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
-COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
-COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
-COMPONENT_TARGETS += $(HARDWARE_CB1X)
-COMPONENT_TARGETS += $(HARDWARE_CB2X)
-COMPONENT_TARGETS += $(HARDWARE_CB3X)
-COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
-COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
-COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
-COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
-COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
-COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
-COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
-COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
-COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
-COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
-COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
-COMPONENT_TARGETS += $(HARDWARE_POIN2)
-COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
-COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
-COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
-COMPONENT_TARGETS += $(HARDWARE_M201)
-COMPONENT_TARGETS += $(HARDWARE_MXV)
-COMPONENT_TARGETS += $(HARDWARE_P201)
-COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
-COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
-COMPONENT_TARGETS += $(HARDWARE_P212)
-COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
-COMPONENT_TARGETS += $(HARDWARE_Q201)
-COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
-COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
-COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
-COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
-COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
-COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
-COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
-COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
-COMPONENT_TARGETS += $(HARDWARE_CI20)
-COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
-COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
-COMPONENT_TARGETS += $(HARDWARE_S824L)
-COMPONENT_TARGETS += $(HARDWARE_VESNIN)
-COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
-COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
-COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
-COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
-COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
-COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
-COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
-COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
-
-
-NEED_ABS_PATH = true
-COMPONENT_IS_3PP = true
-
-
-include ../../../build-system/constants.mk
-
-
-SOURCE_REQUIRES = sources/packages/n/openssl
-
-ifeq ($(__USE_BUILT_GCC_LIBS__),yes)
-REQUIRES = dev/gcc/14.2.0
-else
-REQUIRES = libs/zlib/1.3.1
-REQUIRES += libs/gmp/6.3.0
-endif
-
-# ======= __END_OF_REQUIRES__ =======
-
-
-version = 1.1.1r
-tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/n/openssl/openssl-$(version).tar.xz
-SRC_ARCHIVE = $(tar_xz_archive)
-SRC_DIR = $(TARGET_BUILD_DIR)/openssl-$(version)
-src_dir_name = openssl-$(version)
-src_done = $(TARGET_BUILD_DIR)/.source_done
-
-PATCHES = PATCHES
-
-build_target = $(TARGET_BUILD_DIR)/.build_done
-install_target = $(TARGET_BUILD_DIR)/.install_done
-
-cron_script = $(CURDIR)/cron/certwatch
-
-
-####### Targets
-
-PKG_GROUP = net
-
-#
-# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
-#
-OPENSSL_PKG_NAME = openssl
-OPENSSL_PKG_VERSION = 1.1.1r
-OPENSSL_PKG_ARCH = $(PKGARCH)
-OPENSSL_PKG_DISTRO_NAME = $(DISTRO_NAME)
-OPENSSL_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
-OPENSSL_PKG_GROUP = $(PKG_GROUP)
-### |---handy-ruler-------------------------------|
-OPENSSL_PKG_SHORT_DESCRIPTION = Secure Sockets Layer toolkit
-OPENSSL_PKG_URL = $(BUG_URL)
-OPENSSL_PKG_LICENSE = GPLv2
-OPENSSL_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(OPENSSL_PKG_NAME)-pkg-description
-OPENSSL_PKG_DESCRIPTION_FILE_IN = $(OPENSSL_PKG_NAME)-pkg-description.in
-OPENSSL_PKG_INSTALL_SCRIPT = $(OPENSSL_PKG_NAME)-pkg-install.sh
-
-OPENSSL_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(OPENSSL_PKG_NAME)-package
-
-pkg_basename = $(OPENSSL_PKG_NAME)-$(OPENSSL_PKG_VERSION)-$(OPENSSL_PKG_ARCH)-$(OPENSSL_PKG_DISTRO_NAME)-$(OPENSSL_PKG_DISTRO_VERSION)
-
-pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
-pkg_certificate = $(call cert-name,$(pkg_archive))
-pkg_signature = $(call sign-name,$(pkg_archive))
-pkg_description = $(call desc-name,$(pkg_archive))
-products = $(call pkg-files,$(pkg_archive))
-
-BUILD_TARGETS = $(build_target)
-BUILD_TARGETS += $(install_target)
-
-PRODUCT_TARGETS = $(products)
-
-ROOTFS_TARGETS = $(pkg_archive)
-
-
-include ../../../build-system/core.mk
-
-
-env_sysroot = DESTDIR=$(OPENSSL_PKG)
-
-
-# These are the known patent issues with OpenSSL:
-# name | expires
-# -------+------------------------------------
-# MDC-2: | 4,908,861 2007-03-13, not included
-# IDEA: | 5,214,703 2010-05-25, not included
-#
-# Although all of the above are expired, it's still
-# probably not a good idea to include them as there
-# are better algorithms to use.
-#
-extra_configure_switches = --libdir=lib$(LIBSUFFIX)
-extra_configure_switches += --openssldir=/etc/ssl
-extra_configure_switches += no-mdc2
-extra_configure_switches += no-ec2m
-extra_configure_switches += no-idea
-extra_configure_switches += no-sse2
-extra_configure_switches += enable-camellia
-extra_configure_switches += enable-seed
-extra_configure_switches += enable-rfc3779
-extra_configure_switches += enable-cms
-extra_configure_switches += enable-md2
-extra_configure_switches += enable-rc5
-extra_configure_switches += enable-ssl3
-extra_configure_switches += enable-ssl3-method
-extra_configure_switches += no-weak-ssl-ciphers
-extra_configure_switches += zlib
-extra_configure_switches += shared
-
-
-ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_I586_GLIBC)),)
-arch = i586
-endif
-ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_I686_GLIBC)),)
-arch = i686
-endif
-ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_X86_64_GLIBC)),)
-arch = x86_64
-openssl_environment = KERNEL_BITS=64
-endif
-ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_A1X_GLIBC) $(TOOLCHAIN_A2X_GLIBC) \
- $(TOOLCHAIN_H3_GLIBC) $(TOOLCHAIN_RK328X_GLIBC) \
- $(TOOLCHAIN_S8XX_GLIBC) $(TOOLCHAIN_IMX6_GLIBC) \
- $(TOOLCHAIN_AM335X_GLIBC) $(TOOLCHAIN_OMAP543X_GLIBC)),)
-arch = arm
-endif
-ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_H5_GLIBC) $(TOOLCHAIN_RK33XX_GLIBC) \
- $(TOOLCHAIN_RK339X_GLIBC) $(TOOLCHAIN_RK358X_GLIBC) \
- $(TOOLCHAIN_S9XX_GLIBC) \
- $(TOOLCHAIN_A311X_GLIBC) $(TOOLCHAIN_M1000_GLIBC)),)
-arch = aarch64
-openssl_environment = KERNEL_BITS=64
-endif
-ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_JZ47XX_GLIBC) $(TOOLCHAIN_P5600_GLIBC)),)
-arch = mips32
-endif
-ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_POWER8_GLIBC) $(TOOLCHAIN_POWER9_GLIBC)),)
-arch = ppc64
-openssl_environment = KERNEL_BITS=64
-endif
-ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_POWER8LE_GLIBC) $(TOOLCHAIN_POWER9LE_GLIBC)),)
-arch = ppc64le
-openssl_environment = KERNEL_BITS=64
-endif
-ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_RISCV64_GLIBC)),)
-arch = generic64
-openssl_environment = KERNEL_BITS=64
-endif
-
-openssl_environment += MACHINE=$(arch) SYSTEM=Linux
-
-
-####### Dependencies
-
-$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
- $(UNPACK_SRC_ARCHIVE)
- $(APPLY_PATCHES)
- @( cd $(SRC_DIR) ; \
- find . -name "*.pod" -exec sed -i "s/^\=item \([0-9]\)\(\ \|\.\|$$\)/\=item C<\1>/g" {} \; \
- )
- @touch $@
-
-$(build_target): $(src_done)
- @cd $(SRC_DIR) && \
- $(BUILD_ENVIRONMENT) $(openssl_environment) ./config \
- --prefix=/usr \
- $(extra_configure_switches) \
- $(ARCH_FLAGS) \
- $(HW_FLAGS)
- @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE)
- @touch $@
-
-$(install_target): $(build_target)
- @mkdir -p $(OPENSSL_PKG)
- @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 MANDIR=/usr/share/man install $(env_sysroot)
-ifneq ($(__ENABLE_STATIC__),yes)
- @rm -f $(OPENSSL_PKG)/usr/lib$(LIBSUFFIX)/*.a
-endif
- @mv $(OPENSSL_PKG)/etc/ssl/openssl.cnf $(OPENSSL_PKG)/etc/ssl/openssl.cnf.new
- @rm $(OPENSSL_PKG)/etc/ssl/openssl.cnf.dist
- @rm $(OPENSSL_PKG)/etc/ssl/ct_log_list.cnf.dist
- # ======= Add a cron script to warn root if a certificate is going to expire soon:
- @mkdir -p $(OPENSSL_PKG)/etc/cron.daily
- @cat $(cron_script) > $(OPENSSL_PKG)/etc/cron.daily/certwatch.new
- @chmod 755 $(OPENSSL_PKG)/etc/cron.daily/certwatch.new
- @mkdir -p $(OPENSSL_PKG)/lib$(LIBSUFFIX)
- @( cd $(OPENSSL_PKG)/usr/lib$(LIBSUFFIX) ; \
- chmod +w lib*.so.?.? ; \
- mv lib*.so.?.? ../../lib$(LIBSUFFIX) ; \
- ln -sf ../../lib$(LIBSUFFIX)/lib*.so.?.? . ; \
- ln -sf libcrypto.so.?.? libcrypto.so.1 ; \
- ln -sf libssl.so.?.? libssl.so.1 ; \
- cp -a lib*.so.? ../../lib$(LIBSUFFIX) ; \
- )
- # ======= Fix manpage name collisions =======
- @( cd $(OPENSSL_PKG)/usr/share/man/man1 ; \
- mv passwd.1 ssl_passwd.1 ; \
- for file in *.1 ; do \
- if [ -L $$file ]; then \
- if [ "$$(readlink $$file)" = "passwd.1" ]; then \
- rm -f $$file ; \
- ln -sf ssl_passwd.1 $$file ; \
- fi ; \
- fi ; \
- done \
- )
- # ======= Install Documentation =======
- @if [ -d $(OPENSSL_PKG)/usr/share/man ]; then \
- ( cd $(OPENSSL_PKG)/usr/share/man ; \
- for manpagedir in `find . -type d -name "man*"` ; do \
- ( cd $$manpagedir ; \
- for eachpage in `find . -type l -maxdepth 1` ; do \
- ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
- rm $$eachpage ; \
- done ; \
- gzip -9 *.? ; \
- ) \
- done \
- ) \
- fi
- @mkdir -p $(OPENSSL_PKG)/usr/doc/$(src_dir_name)
- @cp -a $(SRC_DIR)/AUTHORS $(SRC_DIR)/LICENSE \
- $(OPENSSL_PKG)/usr/doc/$(src_dir_name)
- @( cd $(OPENSSL_PKG)/usr/share/doc ; \
- mv openssl $(src_dir_name) ; \
- )
- @( cd $(SRC_DIR) ; \
- cp -a ACKNOWLEDGEMENTS AUTHORS CONTRIBUTING FAQ INSTALL LICENSE NEWS \
- README README.ENGINE doc/HOWTO doc/*.txt \
- $(OPENSSL_PKG)/usr/share/doc/$(src_dir_name) ; \
- )
- @( cd $(SRC_DIR) ; \
- if [ -r CHANGES ]; then \
- DOCSDIR=`echo $(OPENSSL_PKG)/usr/share/doc/$(src_dir_name)` ; \
- cat CHANGES | head -n 1000 > $$DOCSDIR/CHANGES ; \
- touch -r CHANGES $$DOCSDIR/CHANGES ; \
- fi \
- )
- # ======= Install the same to $(TARGET_DEST_DIR) =======
- $(call install-into-devenv, $(OPENSSL_PKG))
- # ======= tune pkg-config *.pc search path to the target destination for development =======
- @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
- sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libcrypto.pc libssl.pc openssl.pc \
- )
- # ======= Strip binaries =======
- @( cd $(OPENSSL_PKG) ; \
- find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
- find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
- )
-ifeq ($(__ENABLE_STATIC__),yes)
- @( cd $(OPENSSL_PKG) ; \
- find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
- )
-endif
- @touch $@
-
-$(OPENSSL_PKG_DESCRIPTION_FILE): $(OPENSSL_PKG_DESCRIPTION_FILE_IN)
- @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
-
-$(pkg_certificate) : $(pkg_archive) ;
-$(pkg_signature) : $(pkg_archive) ;
-$(pkg_description) : $(pkg_archive) ;
-
-$(pkg_archive): $(install_target) $(OPENSSL_PKG_DESCRIPTION_FILE) $(OPENSSL_PKG_INSTALL_SCRIPT)
- @cp $(OPENSSL_PKG_DESCRIPTION_FILE) $(OPENSSL_PKG)/.DESCRIPTION
- @cp $(OPENSSL_PKG_INSTALL_SCRIPT) $(OPENSSL_PKG)/.INSTALL
- @$(BUILD_PKG_REQUIRES) $(OPENSSL_PKG)/.REQUIRES
- @echo "pkgname=$(OPENSSL_PKG_NAME)" > $(OPENSSL_PKG)/.PKGINFO ; \
- echo "pkgver=$(OPENSSL_PKG_VERSION)" >> $(OPENSSL_PKG)/.PKGINFO ; \
- echo "arch=$(OPENSSL_PKG_ARCH)" >> $(OPENSSL_PKG)/.PKGINFO ; \
- echo "distroname=$(OPENSSL_PKG_DISTRO_NAME)" >> $(OPENSSL_PKG)/.PKGINFO ; \
- echo "distrover=$(OPENSSL_PKG_DISTRO_VERSION)" >> $(OPENSSL_PKG)/.PKGINFO ; \
- echo "group=$(OPENSSL_PKG_GROUP)" >> $(OPENSSL_PKG)/.PKGINFO ; \
- echo "short_description=\"$(OPENSSL_PKG_SHORT_DESCRIPTION)\"" >> $(OPENSSL_PKG)/.PKGINFO ; \
- echo "url=$(OPENSSL_PKG_URL)" >> $(OPENSSL_PKG)/.PKGINFO ; \
- echo "license=$(OPENSSL_PKG_LICENSE)" >> $(OPENSSL_PKG)/.PKGINFO
- @$(PSEUDO) sh -c "cd $(OPENSSL_PKG) && \
- chown -R root:root . && \
- $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 1.1.1r
===================================================================
--- 1.1.1r (.../openssl) (revision 419)
+++ 1.1.1r (.../openssl11) (nonexistent)
Property changes on: 1.1.1r
___________________________________________________________________
Deleted: svn:ignore
## -1,74 +0,0 ##
-
-# install dir
-dist
-
-# Target build dirs
-.a1x-newlib
-.a2x-newlib
-.at91sam7s-newlib
-
-.build-machine
-
-.a1x-glibc
-.a2x-glibc
-.h3-glibc
-.h5-glibc
-.i586-glibc
-.i686-glibc
-.imx6-glibc
-.jz47xx-glibc
-.makefile
-.am335x-glibc
-.omap543x-glibc
-.p5600-glibc
-.power8-glibc
-.power8le-glibc
-.power9-glibc
-.power9le-glibc
-.m1000-glibc
-.riscv64-glibc
-.rk328x-glibc
-.rk33xx-glibc
-.rk339x-glibc
-.rk358x-glibc
-.s8xx-glibc
-.s9xx-glibc
-.x86_64-glibc
-
-# Hidden files (each file)
-.makefile
-.dist
-.rootfs
-
-# src & hw requires
-.src_requires
-.src_requires_depend
-.requires
-.requires_depend
-
-# Tarballs
-*.gz
-*.bz2
-*.lz
-*.xz
-*.tgz
-*.txz
-
-# Signatures
-*.asc
-*.sig
-*.sign
-*.sha1sum
-
-# Patches
-*.patch
-
-# Descriptions
-*.dsc
-*.txt
-
-# Default linux config files
-*.defconfig
-
-# backup copies
-*~
Index: 1.1.1w/Makefile
===================================================================
--- 1.1.1w/Makefile (.../openssl) (nonexistent)
+++ 1.1.1w/Makefile (.../openssl11) (revision 420)
@@ -0,0 +1,308 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
+COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/n/openssl11
+
+ifeq ($(__USE_BUILT_GCC_LIBS__),yes)
+REQUIRES = dev/gcc/14.2.0
+else
+REQUIRES = libs/zlib/1.3.1
+REQUIRES += libs/gmp/6.3.0
+endif
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 1.1.1w
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/n/openssl11/openssl-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/openssl-$(version)
+src_dir_name = openssl-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+doc_dir_name = openssl-$(version)
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = net
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+OPENSSL_PKG_NAME = openssl11
+OPENSSL_PKG_VERSION = 1.1.1w
+OPENSSL_PKG_ARCH = $(PKGARCH)
+OPENSSL_PKG_DISTRO_NAME = $(DISTRO_NAME)
+OPENSSL_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+OPENSSL_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+OPENSSL_PKG_SHORT_DESCRIPTION = Secure Sockets Layer toolkit 1.1.x
+OPENSSL_PKG_URL = $(BUG_URL)
+OPENSSL_PKG_LICENSE = GPLv2
+OPENSSL_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(OPENSSL_PKG_NAME)-pkg-description
+OPENSSL_PKG_DESCRIPTION_FILE_IN = $(OPENSSL_PKG_NAME)-pkg-description.in
+OPENSSL_PKG_INSTALL_SCRIPT = $(OPENSSL_PKG_NAME)-pkg-install.sh
+
+OPENSSL_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(OPENSSL_PKG_NAME)-package
+
+pkg_basename = $(OPENSSL_PKG_NAME)-$(OPENSSL_PKG_VERSION)-$(OPENSSL_PKG_ARCH)-$(OPENSSL_PKG_DISTRO_NAME)-$(OPENSSL_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(OPENSSL_PKG)
+
+
+# These are the known patent issues with OpenSSL:
+# name | expires
+# -------+------------------------------------
+# MDC-2: | 4,908,861 2007-03-13, not included
+# IDEA: | 5,214,703 2010-05-25, not included
+#
+# Although all of the above are expired, it's still
+# probably not a good idea to include them as there
+# are better algorithms to use.
+#
+extra_configure_switches = --libdir=lib$(LIBSUFFIX)/openssl-1.1
+extra_configure_switches += --openssldir=/etc/ssl
+extra_configure_switches += no-mdc2
+extra_configure_switches += no-ec2m
+extra_configure_switches += no-idea
+extra_configure_switches += no-sse2
+extra_configure_switches += enable-camellia
+extra_configure_switches += enable-seed
+extra_configure_switches += enable-rfc3779
+extra_configure_switches += enable-cms
+extra_configure_switches += enable-md2
+extra_configure_switches += enable-rc5
+extra_configure_switches += enable-ssl3
+extra_configure_switches += enable-ssl3-method
+extra_configure_switches += no-weak-ssl-ciphers
+extra_configure_switches += zlib
+extra_configure_switches += shared
+
+
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_I586_GLIBC)),)
+arch = i586
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_I686_GLIBC)),)
+arch = i686
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_X86_64_GLIBC)),)
+arch = x86_64
+openssl_environment = KERNEL_BITS=64
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_A1X_GLIBC) $(TOOLCHAIN_A2X_GLIBC) \
+ $(TOOLCHAIN_H3_GLIBC) $(TOOLCHAIN_RK328X_GLIBC) \
+ $(TOOLCHAIN_S8XX_GLIBC) $(TOOLCHAIN_IMX6_GLIBC) \
+ $(TOOLCHAIN_AM335X_GLIBC) $(TOOLCHAIN_OMAP543X_GLIBC)),)
+arch = arm
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_H5_GLIBC) $(TOOLCHAIN_RK33XX_GLIBC) \
+ $(TOOLCHAIN_RK339X_GLIBC) $(TOOLCHAIN_RK358X_GLIBC) \
+ $(TOOLCHAIN_S9XX_GLIBC) \
+ $(TOOLCHAIN_A311X_GLIBC) $(TOOLCHAIN_M1000_GLIBC)),)
+arch = aarch64
+openssl_environment = KERNEL_BITS=64
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_JZ47XX_GLIBC) $(TOOLCHAIN_P5600_GLIBC)),)
+arch = mips32
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_POWER8_GLIBC) $(TOOLCHAIN_POWER9_GLIBC)),)
+arch = ppc64
+openssl_environment = KERNEL_BITS=64
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_POWER8LE_GLIBC) $(TOOLCHAIN_POWER9LE_GLIBC)),)
+arch = ppc64le
+openssl_environment = KERNEL_BITS=64
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_RISCV64_GLIBC)),)
+arch = generic64
+openssl_environment = KERNEL_BITS=64
+endif
+
+openssl_environment += MACHINE=$(arch) SYSTEM=Linux
+
+LDFLAGS += -Wl,-rpath,/lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX)/openssl-1.1
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @( cd $(SRC_DIR) ; \
+ find . -name "*.pod" -exec sed -i "s/^\=item \([0-9]\)\(\ \|\.\|$$\)/\=item C<\1>/g" {} \; \
+ )
+ @touch $@
+
+$(build_target): $(src_done)
+ @cd $(SRC_DIR) && \
+ $(BUILD_ENVIRONMENT) $(openssl_environment) ./config \
+ --prefix=/usr \
+ $(extra_configure_switches) \
+ $(ARCH_FLAGS) \
+ $(HW_FLAGS)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE)
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(OPENSSL_PKG)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 MANDIR=/usr/share/man install $(env_sysroot)
+ifneq ($(__ENABLE_STATIC__),yes)
+ @rm -f $(OPENSSL_PKG)/usr/lib$(LIBSUFFIX)/openssl-1.1/*.a
+endif
+ # ======= Move libraries: =======
+ @mkdir -p $(OPENSSL_PKG)/lib$(LIBSUFFIX)
+ @( cd $(OPENSSL_PKG)/usr/lib$(LIBSUFFIX)/openssl-1.1 ; \
+ chmod +w lib*.so.?.? ; \
+ mv lib*.so.?.? ../../../lib$(LIBSUFFIX) ; \
+ ln -sf ../../../lib$(LIBSUFFIX)/lib*.so.?.? . ; \
+ ln -sf libcrypto.so.?.? libcrypto.so.1 ; \
+ ln -sf libssl.so.?.? libssl.so.1 ; \
+ cp -a lib*.so.? ../../../lib$(LIBSUFFIX) ; \
+ )
+ # ======= Move include files: =======
+ @mkdir -p $(OPENSSL_PKG)/usr/include/openssl-1.1
+ @mv $(OPENSSL_PKG)/usr/include/openssl $(OPENSSL_PKG)/usr/include/openssl-1.1/openssl
+ @sed -e 's,/include$$,/include/openssl-1.1,' -i $(OPENSSL_PKG)/usr/lib$(LIBSUFFIX)/openssl-1.1/pkgconfig/*.pc
+ # ======= Rename openssl binary: =======
+ @mv $(OPENSSL_PKG)/usr/bin/openssl $(OPENSSL_PKG)/usr/bin/openssl-1.1
+ # ======= Remove not needed package things: =======
+ @rm -f $(OPENSSL_PKG)/usr/bin/c_rehash
+ @rm -rf $(OPENSSL_PKG)/etc
+ @rm -rf $(OPENSSL_PKG)/usr/share
+ # ======= Install Documentation =======
+ @mkdir -p $(OPENSSL_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(SRC_DIR)/AUTHORS $(SRC_DIR)/LICENSE \
+ $(OPENSSL_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(OPENSSL_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a ACKNOWLEDGEMENTS AUTHORS CONTRIBUTING FAQ INSTALL LICENSE NEWS \
+ README README.ENGINE doc/HOWTO doc/*.txt \
+ $(OPENSSL_PKG)/usr/share/doc/$(doc_dir_name) ; \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r CHANGES ]; then \
+ DOCSDIR=`echo $(OPENSSL_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat CHANGES | head -n 1000 > $$DOCSDIR/CHANGES ; \
+ touch -r CHANGES $$DOCSDIR/CHANGES ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(OPENSSL_PKG))
+ # ======= Tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/openssl-1.1/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libcrypto.pc libssl.pc openssl.pc \
+ )
+ # ======= Strip binaries =======
+ @( cd $(OPENSSL_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(OPENSSL_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ @touch $@
+
+$(OPENSSL_PKG_DESCRIPTION_FILE): $(OPENSSL_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(OPENSSL_PKG_DESCRIPTION_FILE) $(OPENSSL_PKG_INSTALL_SCRIPT)
+ @cp $(OPENSSL_PKG_DESCRIPTION_FILE) $(OPENSSL_PKG)/.DESCRIPTION
+ @cp $(OPENSSL_PKG_INSTALL_SCRIPT) $(OPENSSL_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(OPENSSL_PKG)/.REQUIRES
+ @echo "pkgname=$(OPENSSL_PKG_NAME)" > $(OPENSSL_PKG)/.PKGINFO ; \
+ echo "pkgver=$(OPENSSL_PKG_VERSION)" >> $(OPENSSL_PKG)/.PKGINFO ; \
+ echo "arch=$(OPENSSL_PKG_ARCH)" >> $(OPENSSL_PKG)/.PKGINFO ; \
+ echo "distroname=$(OPENSSL_PKG_DISTRO_NAME)" >> $(OPENSSL_PKG)/.PKGINFO ; \
+ echo "distrover=$(OPENSSL_PKG_DISTRO_VERSION)" >> $(OPENSSL_PKG)/.PKGINFO ; \
+ echo "group=$(OPENSSL_PKG_GROUP)" >> $(OPENSSL_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(OPENSSL_PKG_SHORT_DESCRIPTION)\"" >> $(OPENSSL_PKG)/.PKGINFO ; \
+ echo "url=$(OPENSSL_PKG_URL)" >> $(OPENSSL_PKG)/.PKGINFO ; \
+ echo "license=$(OPENSSL_PKG_LICENSE)" >> $(OPENSSL_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(OPENSSL_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 1.1.1w/PATCHES
===================================================================
--- 1.1.1w/PATCHES (.../openssl) (nonexistent)
+++ 1.1.1w/PATCHES (.../openssl11) (revision 420)
@@ -0,0 +1,2 @@
+
+../../../sources/packages/n/openssl11/patches/openssl-1.1.1w-CVE-2024-5535.patch -p0
Index: 1.1.1w/cron/certwatch
===================================================================
--- 1.1.1w/cron/certwatch (.../openssl) (nonexistent)
+++ 1.1.1w/cron/certwatch (.../openssl11) (revision 420)
@@ -0,0 +1,129 @@
+#!/bin/sh
+#
+# Will check all certificates stored in $CERTDIR for their expiration date,
+# and will display (if optional "stdout" argument is given), or mail a warning
+# message to $MAILADDR (if script is executed without any parameter
+# - unattended mode suitable for cron execution) for each particular certificate
+# that is about to expire in time less to, or equal to $DAYS after this script
+# has been executed, or if it has already expired.
+# This stupid script (C) 2006,2007 Jan Rafaj
+
+########################## CONFIGURATION SECTION BEGIN #########################
+# Note: all settings are mandatory
+# Warning will be sent if a certificate expires in time <= days given here
+DAYS=7
+# E-mail address where to send warnings
+MAILADDR=root
+# Directory with certificates to check
+CERTDIR=/etc/ssl/certs
+# Directory where to keep state files if this script isnt executed with "stdout"
+STATEDIR=/var/run
+########################### CONFIGURATION SECTION END ##########################
+
+PATH=/bin:/usr/bin:/sbin:/usr/sbin
+DAY_IN_SECS=$((60*60*24))
+DATE_CURRENT=$(date '+%s')
+
+usage()
+{
+ echo "Usage: $0 [stdout]"
+ echo
+ echo "Detailed description and configuration is embedded within the script."
+ exit 0
+}
+
+message()
+{
+ cat << EOF
+ WARNING: certificate $certfile
+ is about to expire in time equal to or less than $DAYS days from now on,
+ or has already expired - it might be a good idea to obtain/create new one.
+
+EOF
+}
+
+message_mail()
+{
+ message
+ cat << EOF
+ NOTE: This message is being sent only once.
+
+ A lock-file
+ $STATEDIR/certwatch-mailwarning-sent-$certfilebase
+ has been created, which will prevent this script from mailing you again
+ upon its subsequent executions by crond. You dont need to care about it;
+ the file will be auto-deleted as soon as you'll prolong your certificate.
+EOF
+}
+
+unset stdout
+case $# in
+ 0) ;;
+ 1) if [ "$1" = "-h" -o "$1" == "--help" ]; then
+ usage
+ elif [ "$1" = "stdout" ]; then
+ stdout=1
+ else
+ usage
+ fi
+ ;;
+ *) usage ;;
+esac
+
+for dir in $STATEDIR $CERTDIR ; do
+ if [ ! -d $dir ]; then
+ echo "ERROR: directory $dir does not exist"
+ exit 1
+ fi
+done
+for binary in basename date find grep mail openssl touch ; do
+ if [ ! \( -x /usr/bin/$binary -o -x /bin/$binary \) ]; then
+ echo "ERROR: /usr/bin/$binary not found"
+ exit 1
+ fi
+done
+
+find $CERTDIR -type f -maxdepth 1 | while read certfile ; do
+ if [ "$certfile" != "/etc/ssl/certs/ca-certificates.crt" ]; then
+ certfilebase="$(basename "$certfile")"
+ inform=PEM
+ echo "$certfile" | grep -q -i '\.net$'
+ if [ $? -eq 0 ]; then
+ # This is based purely on filename extension, so may give false results.
+ # But lets assume noone uses NET format certs today, ok?
+ continue
+ fi
+ echo "$certfile" | grep -q -i '\.der$'
+ if [ $? -eq 0 -o "$(file "$certfile" | egrep '(ASCII|PEM)')" == "" ]; then
+ inform=DER
+ fi
+ # We wont use '-checkend' since it is not properly documented (as of
+ # OpenSSL 0.9.8e).
+ DATE_CERT_EXPIRES=$(openssl x509 -in "$certfile" -inform $inform -noout -enddate | sed 's/^notAfter=//')
+ DATE_CERT_EXPIRES=$(date -d"$DATE_CERT_EXPIRES" +%s)
+ if [ $(($DATE_CERT_EXPIRES - $DATE_CURRENT)) -le $(($DAYS * $DAY_IN_SECS)) ]
+ then
+ if [ $stdout ]; then
+ message
+ else
+ if [ ! -f $STATEDIR/certwatch-mailwarning-sent-"$certfilebase" ]; then
+ subject="$0: certificate $certfile expiration warning"
+ message_mail | mail -r "certwatch@$HOSTNAME" \
+ -s "$subject" \
+ $MAILADDR 2>/dev/null
+ # echo "Mail about expiring certificate $certfile sent to $MAILADDR."
+ # echo "If you need to send it again, please remove lock-file"
+ # echo "$STATEDIR/certwatch-mailwarning-sent-$certfilebase ."
+ # echo
+ fi
+ touch $STATEDIR/certwatch-mailwarning-sent-"$certfilebase"
+ fi
+ else
+ if [ ! $stdout ]; then
+ if [ -f $STATEDIR/certwatch-mailwarning-sent-"$certfilebase" ]; then
+ rm $STATEDIR/certwatch-mailwarning-sent-"$certfilebase"
+ fi
+ fi
+ fi
+ fi
+done
Index: 1.1.1w/cron
===================================================================
--- 1.1.1w/cron (.../openssl) (nonexistent)
+++ 1.1.1w/cron (.../openssl11) (revision 420)
Property changes on: 1.1.1w/cron
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: 1.1.1w/openssl11-pkg-description.in
===================================================================
--- 1.1.1w/openssl11-pkg-description.in (.../openssl) (nonexistent)
+++ 1.1.1w/openssl11-pkg-description.in (.../openssl11) (revision 420)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+openssl11: openssl11 @VERSION@ (Secure Sockets Layer toolkit 1.1.x)
+openssl11:
+openssl11: The OpenSSL certificate management tool and the shared libraries
+openssl11: that provide various encryption and decryption algorithms and
+openssl11: protocols.
+openssl11: This product includes software developed by the OpenSSL Project for
+openssl11: use in the OpenSSL Toolkit (http://www.openssl.org). This product
+openssl11: includes cryptographic software written by Eric Young
+openssl11: (eay@cryptsoft.com). This product includes software written by Tim
+openssl11: Hudson (tjh@cryptsoft.com).
+openssl11:
Index: 1.1.1w/openssl11-pkg-install.sh
===================================================================
--- 1.1.1w/openssl11-pkg-install.sh (.../openssl) (nonexistent)
+++ 1.1.1w/openssl11-pkg-install.sh (.../openssl11) (revision 420)
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: 1.1.1w/openssl11-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 1.1.1w
===================================================================
--- 1.1.1w (.../openssl) (nonexistent)
+++ 1.1.1w (.../openssl11) (revision 420)
Property changes on: 1.1.1w
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: 1.1.1w-ppc32/Makefile
===================================================================
--- 1.1.1w-ppc32/Makefile (.../openssl) (nonexistent)
+++ 1.1.1w-ppc32/Makefile (.../openssl11) (revision 420)
@@ -0,0 +1,191 @@
+
+COMPONENT_TARGETS = $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+CREATE_PPC32_PACKAGE = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/n/openssl11
+
+REQUIRES = net/openssl11/1.1.1w
+REQUIRES += libs/zlib/1.3.1-ppc32
+REQUIRES += libs/gmp/6.3.0-ppc32
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 1.1.1w
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/n/openssl11/openssl-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/openssl-$(version)
+src_dir_name = openssl-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = net
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+OPENSSL32_PKG_NAME = openssl11-x32
+OPENSSL32_PKG_VERSION = 1.1.1w
+OPENSSL32_PKG_ARCH = $(PKGARCH)
+OPENSSL32_PKG_DISTRO_NAME = $(DISTRO_NAME)
+OPENSSL32_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+OPENSSL32_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+OPENSSL32_PKG_SHORT_DESCRIPTION = Secure Sockets Layer toolkit 1.1.x
+OPENSSL32_PKG_URL = $(BUG_URL)
+OPENSSL32_PKG_LICENSE = GPLv2
+OPENSSL32_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(OPENSSL32_PKG_NAME)-pkg-description
+OPENSSL32_PKG_DESCRIPTION_FILE_IN = $(OPENSSL32_PKG_NAME)-pkg-description.in
+OPENSSL32_PKG_INSTALL_SCRIPT = $(OPENSSL32_PKG_NAME)-pkg-install.sh
+
+OPENSSL32_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(OPENSSL32_PKG_NAME)-package
+
+pkg_basename = $(OPENSSL32_PKG_NAME)-$(OPENSSL32_PKG_VERSION)-$(OPENSSL32_PKG_ARCH)-$(OPENSSL32_PKG_DISTRO_NAME)-$(OPENSSL32_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(OPENSSL32_PKG)
+
+
+extra_configure_switches = --libdir=lib$(MULTILIB_PPC32_SUFFIX)/openssl-1.1
+extra_configure_switches += --openssldir=/etc/ssl
+extra_configure_switches += no-mdc2
+extra_configure_switches += no-ec2m
+extra_configure_switches += no-idea
+extra_configure_switches += no-sse2
+extra_configure_switches += enable-camellia
+extra_configure_switches += enable-seed
+extra_configure_switches += enable-rfc3779
+extra_configure_switches += enable-cms
+extra_configure_switches += enable-md2
+extra_configure_switches += enable-rc5
+extra_configure_switches += enable-ssl3
+extra_configure_switches += enable-ssl3-method
+extra_configure_switches += no-weak-ssl-ciphers
+extra_configure_switches += zlib
+extra_configure_switches += shared
+
+openssl_environment = KERNEL_BITS=32 MACHINE=ppc64 SYSTEM=Linux
+
+LDFLAGS += -Wl,-rpath,/lib$(MULTILIB_PPC32_SUFFIX):/usr/lib$(MULTILIB_PPC32_SUFFIX):/usr/lib$(MULTILIB_PPC32_SUFFIX)/openssl-1.1
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @( cd $(SRC_DIR) ; \
+ find . -name "*.pod" -exec sed -i "s/^\=item \([0-9]\)\(\ \|\.\|$$\)/\=item C<\1>/g" {} \; \
+ )
+ @touch $@
+
+$(build_target): $(src_done)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(openssl_environment) ./config \
+ --prefix=/usr \
+ $(extra_configure_switches) \
+ $(ARCH_FLAGS) \
+ $(HW_FLAGS)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE)
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(OPENSSL32_PKG)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 MANDIR=/usr/share/man install $(env_sysroot)
+ifneq ($(__ENABLE_STATIC__),yes)
+ @rm -f $(OPENSSL32_PKG)/usr/lib$(MULTILIB_PPC32_SUFFIX)/openssl-1.1/*.a
+endif
+ @mkdir -p $(OPENSSL32_PKG)/usr/bin/32
+ @( cd $(OPENSSL32_PKG)/usr/bin ; \
+ rm -f c_rehash ; \
+ find . -type f | xargs mv -t 32 ; \
+ )
+ @mkdir -p $(OPENSSL32_PKG)/lib$(MULTILIB_PPC32_SUFFIX)
+ @( cd $(OPENSSL32_PKG)/usr/lib$(MULTILIB_PPC32_SUFFIX)/openssl-1.1 ; \
+ chmod +w lib*.so.?.? ; \
+ mv lib*.so.?.? ../../../lib$(MULTILIB_PPC32_SUFFIX) ; \
+ ln -sf ../../../lib$(MULTILIB_PPC32_SUFFIX)/lib*.so.?.? . ; \
+ ln -sf libcrypto.so.?.? libcrypto.so.1 ; \
+ ln -sf libssl.so.?.? libssl.so.1 ; \
+ cp -a lib*.so.? ../../../lib$(MULTILIB_PPC32_SUFFIX) ; \
+ )
+ @rm -rf $(OPENSSL32_PKG)/etc
+ @rm -rf $(OPENSSL32_PKG)/usr/include
+ @rm -rf $(OPENSSL32_PKG)/usr/share
+ # ======= Move include files: =======
+ @sed -e 's,/include$$,/include/openssl-1.1,' -i $(OPENSSL32_PKG)/usr/lib$(MULTILIB_PPC32_SUFFIX)/openssl-1.1/pkgconfig/*.pc
+ # ======= Rename openssl binary: =======
+ @mv $(OPENSSL32_PKG)/usr/bin/32/openssl $(OPENSSL32_PKG)/usr/bin/32/openssl-1.1
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(OPENSSL32_PKG))
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_PPC32_SUFFIX)/openssl-1.1/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libcrypto.pc libssl.pc openssl.pc \
+ )
+ # ======= Strip binaries =======
+ @( cd $(OPENSSL32_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(OPENSSL32_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ @touch $@
+
+$(OPENSSL32_PKG_DESCRIPTION_FILE): $(OPENSSL32_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(OPENSSL32_PKG_DESCRIPTION_FILE) $(OPENSSL32_PKG_INSTALL_SCRIPT)
+ @cp $(OPENSSL32_PKG_DESCRIPTION_FILE) $(OPENSSL32_PKG)/.DESCRIPTION
+ @cp $(OPENSSL32_PKG_INSTALL_SCRIPT) $(OPENSSL32_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(OPENSSL32_PKG)/.REQUIRES
+ @echo "pkgname=$(OPENSSL32_PKG_NAME)" > $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "pkgver=$(OPENSSL32_PKG_VERSION)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "arch=$(OPENSSL32_PKG_ARCH)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "distroname=$(OPENSSL32_PKG_DISTRO_NAME)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "distrover=$(OPENSSL32_PKG_DISTRO_VERSION)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "group=$(OPENSSL32_PKG_GROUP)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(OPENSSL32_PKG_SHORT_DESCRIPTION)\"" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "url=$(OPENSSL32_PKG_URL)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "license=$(OPENSSL32_PKG_LICENSE)" >> $(OPENSSL32_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(OPENSSL32_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 1.1.1w-ppc32/PATCHES
===================================================================
--- 1.1.1w-ppc32/PATCHES (.../openssl) (nonexistent)
+++ 1.1.1w-ppc32/PATCHES (.../openssl11) (revision 420)
@@ -0,0 +1,2 @@
+
+../../../sources/packages/n/openssl11/patches/openssl-1.1.1w-CVE-2024-5535.patch -p0
Index: 1.1.1w-ppc32/openssl11-x32-pkg-description.in
===================================================================
--- 1.1.1w-ppc32/openssl11-x32-pkg-description.in (.../openssl) (nonexistent)
+++ 1.1.1w-ppc32/openssl11-x32-pkg-description.in (.../openssl11) (revision 420)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+openssl11-x32: openssl11-x32 @VERSION@ (Secure Sockets Layer toolkit 1.1.x)
+openssl11-x32:
+openssl11-x32: The OpenSSL certificate management tool and the shared libraries
+openssl11-x32: that provide various encryption and decryption algorithms and
+openssl11-x32: protocols.
+openssl11-x32: This product includes software developed by the OpenSSL Project for
+openssl11-x32: use in the OpenSSL Toolkit (http://www.openssl.org). This product
+openssl11-x32: includes cryptographic software written by Eric Young
+openssl11-x32: (eay@cryptsoft.com). This product includes software written by Tim
+openssl11-x32: Hudson (tjh@cryptsoft.com).
+openssl11-x32:
Index: 1.1.1w-ppc32/openssl11-x32-pkg-install.sh
===================================================================
--- 1.1.1w-ppc32/openssl11-x32-pkg-install.sh (.../openssl) (nonexistent)
+++ 1.1.1w-ppc32/openssl11-x32-pkg-install.sh (.../openssl11) (revision 420)
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: 1.1.1w-ppc32/openssl11-x32-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 1.1.1w-ppc32
===================================================================
--- 1.1.1w-ppc32 (.../openssl) (nonexistent)
+++ 1.1.1w-ppc32 (.../openssl11) (revision 420)
Property changes on: 1.1.1w-ppc32
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: 1.1.1w-x86_32/Makefile
===================================================================
--- 1.1.1w-x86_32/Makefile (.../openssl) (nonexistent)
+++ 1.1.1w-x86_32/Makefile (.../openssl11) (revision 420)
@@ -0,0 +1,191 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC64)
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+CREATE_X86_32_PACKAGE = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/n/openssl11
+
+REQUIRES = net/openssl11/1.1.1w
+REQUIRES += libs/zlib/1.3.1-x86_32
+REQUIRES += libs/gmp/6.3.0-x86_32
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 1.1.1w
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/n/openssl11/openssl-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/openssl-$(version)
+src_dir_name = openssl-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = net
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+OPENSSL32_PKG_NAME = openssl11-x32
+OPENSSL32_PKG_VERSION = 1.1.1w
+OPENSSL32_PKG_ARCH = $(PKGARCH)
+OPENSSL32_PKG_DISTRO_NAME = $(DISTRO_NAME)
+OPENSSL32_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+OPENSSL32_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+OPENSSL32_PKG_SHORT_DESCRIPTION = Secure Sockets Layer toolkit 1.1.x
+OPENSSL32_PKG_URL = $(BUG_URL)
+OPENSSL32_PKG_LICENSE = GPLv2
+OPENSSL32_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(OPENSSL32_PKG_NAME)-pkg-description
+OPENSSL32_PKG_DESCRIPTION_FILE_IN = $(OPENSSL32_PKG_NAME)-pkg-description.in
+OPENSSL32_PKG_INSTALL_SCRIPT = $(OPENSSL32_PKG_NAME)-pkg-install.sh
+
+OPENSSL32_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(OPENSSL32_PKG_NAME)-package
+
+pkg_basename = $(OPENSSL32_PKG_NAME)-$(OPENSSL32_PKG_VERSION)-$(OPENSSL32_PKG_ARCH)-$(OPENSSL32_PKG_DISTRO_NAME)-$(OPENSSL32_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(OPENSSL32_PKG)
+
+
+extra_configure_switches = --libdir=lib$(MULTILIB_X86_32_SUFFIX)/openssl-1.1
+extra_configure_switches += --openssldir=/etc/ssl
+extra_configure_switches += no-mdc2
+extra_configure_switches += no-ec2m
+extra_configure_switches += no-idea
+extra_configure_switches += no-sse2
+extra_configure_switches += enable-camellia
+extra_configure_switches += enable-seed
+extra_configure_switches += enable-rfc3779
+extra_configure_switches += enable-cms
+extra_configure_switches += enable-md2
+extra_configure_switches += enable-rc5
+extra_configure_switches += enable-ssl3
+extra_configure_switches += enable-ssl3-method
+extra_configure_switches += no-weak-ssl-ciphers
+extra_configure_switches += zlib
+extra_configure_switches += shared
+
+openssl_environment = MACHINE=i686 SYSTEM=Linux
+
+LDFLAGS += -Wl,-rpath,/lib$(MULTILIB_X86_32_SUFFIX):/usr/lib$(MULTILIB_X86_32_SUFFIX):/usr/lib$(MULTILIB_X86_32_SUFFIX)/openssl-1.1
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @( cd $(SRC_DIR) ; \
+ find . -name "*.pod" -exec sed -i "s/^\=item \([0-9]\)\(\ \|\.\|$$\)/\=item C<\1>/g" {} \; \
+ )
+ @( cd $(SRC_DIR) ; \
+ sed -i "/linux-elf/s/fomit-frame-pointer/fomit-frame-pointer -march=i686 -mtune=i686/g" Configure ; \
+ )
+ @touch $@
+
+$(build_target): $(src_done)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(openssl_environment) ./config \
+ --prefix=/usr \
+ $(extra_configure_switches) \
+ $(ARCH_FLAGS) \
+ $(HW_FLAGS)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE)
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(OPENSSL32_PKG)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 MANDIR=/usr/share/man install $(env_sysroot)
+ifneq ($(__ENABLE_STATIC__),yes)
+ @rm -f $(OPENSSL32_PKG)/usr/lib$(MULTILIB_X86_32_SUFFIX)/openssl-1.1/*.a
+endif
+ @mkdir -p $(OPENSSL32_PKG)/usr/bin/32
+ @( cd $(OPENSSL32_PKG)/usr/bin ; \
+ rm -f c_rehash ; \
+ find . -type f | xargs mv -t 32 ; \
+ )
+ @mkdir -p $(OPENSSL32_PKG)/lib$(MULTILIB_X86_32_SUFFIX)
+ @( cd $(OPENSSL32_PKG)/usr/lib$(MULTILIB_X86_32_SUFFIX)/openssl-1.1 ; \
+ chmod +w lib*.so.?.? ; \
+ mv lib*.so.?.? ../../../lib$(MULTILIB_X86_32_SUFFIX) ; \
+ ln -sf ../../../lib$(MULTILIB_X86_32_SUFFIX)/lib*.so.?.? . ; \
+ ln -sf libcrypto.so.?.? libcrypto.so.1 ; \
+ ln -sf libssl.so.?.? libssl.so.1 ; \
+ cp -a lib*.so.? ../../../lib$(MULTILIB_X86_32_SUFFIX) ; \
+ )
+ @rm -rf $(OPENSSL32_PKG)/etc
+ @rm -rf $(OPENSSL32_PKG)/usr/include
+ @rm -rf $(OPENSSL32_PKG)/usr/share
+ # ======= Move include files: =======
+ @sed -e 's,/include$$,/include/openssl-1.1,' -i $(OPENSSL32_PKG)/usr/lib$(MULTILIB_X86_32_SUFFIX)/openssl-1.1/pkgconfig/*.pc
+ # ======= Rename openssl binary: =======
+ @mv $(OPENSSL32_PKG)/usr/bin/32/openssl $(OPENSSL32_PKG)/usr/bin/32/openssl-1.1
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(OPENSSL32_PKG))
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_X86_32_SUFFIX)/openssl-1.1/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libcrypto.pc libssl.pc openssl.pc \
+ )
+ # ======= Strip binaries =======
+ @( cd $(OPENSSL32_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(OPENSSL32_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ @touch $@
+
+$(OPENSSL32_PKG_DESCRIPTION_FILE): $(OPENSSL32_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(OPENSSL32_PKG_DESCRIPTION_FILE) $(OPENSSL32_PKG_INSTALL_SCRIPT)
+ @cp $(OPENSSL32_PKG_DESCRIPTION_FILE) $(OPENSSL32_PKG)/.DESCRIPTION
+ @cp $(OPENSSL32_PKG_INSTALL_SCRIPT) $(OPENSSL32_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(OPENSSL32_PKG)/.REQUIRES
+ @echo "pkgname=$(OPENSSL32_PKG_NAME)" > $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "pkgver=$(OPENSSL32_PKG_VERSION)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "arch=$(OPENSSL32_PKG_ARCH)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "distroname=$(OPENSSL32_PKG_DISTRO_NAME)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "distrover=$(OPENSSL32_PKG_DISTRO_VERSION)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "group=$(OPENSSL32_PKG_GROUP)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(OPENSSL32_PKG_SHORT_DESCRIPTION)\"" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "url=$(OPENSSL32_PKG_URL)" >> $(OPENSSL32_PKG)/.PKGINFO ; \
+ echo "license=$(OPENSSL32_PKG_LICENSE)" >> $(OPENSSL32_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(OPENSSL32_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 1.1.1w-x86_32/PATCHES
===================================================================
--- 1.1.1w-x86_32/PATCHES (.../openssl) (nonexistent)
+++ 1.1.1w-x86_32/PATCHES (.../openssl11) (revision 420)
@@ -0,0 +1,2 @@
+
+../../../sources/packages/n/openssl11/patches/openssl-1.1.1w-CVE-2024-5535.patch -p0
Index: 1.1.1w-x86_32/openssl11-x32-pkg-description.in
===================================================================
--- 1.1.1w-x86_32/openssl11-x32-pkg-description.in (.../openssl) (nonexistent)
+++ 1.1.1w-x86_32/openssl11-x32-pkg-description.in (.../openssl11) (revision 420)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+openssl11-x32: openssl11-x32 @VERSION@ (Secure Sockets Layer toolkit 1.1.x)
+openssl11-x32:
+openssl11-x32: The OpenSSL certificate management tool and the shared libraries
+openssl11-x32: that provide various encryption and decryption algorithms and
+openssl11-x32: protocols.
+openssl11-x32: This product includes software developed by the OpenSSL Project for
+openssl11-x32: use in the OpenSSL Toolkit (http://www.openssl.org). This product
+openssl11-x32: includes cryptographic software written by Eric Young
+openssl11-x32: (eay@cryptsoft.com). This product includes software written by Tim
+openssl11-x32: Hudson (tjh@cryptsoft.com).
+openssl11-x32:
Index: 1.1.1w-x86_32/openssl11-x32-pkg-install.sh
===================================================================
--- 1.1.1w-x86_32/openssl11-x32-pkg-install.sh (.../openssl) (nonexistent)
+++ 1.1.1w-x86_32/openssl11-x32-pkg-install.sh (.../openssl11) (revision 420)
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: 1.1.1w-x86_32/openssl11-x32-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 1.1.1w-x86_32
===================================================================
--- 1.1.1w-x86_32 (.../openssl) (nonexistent)
+++ 1.1.1w-x86_32 (.../openssl11) (revision 420)
Property changes on: 1.1.1w-x86_32
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Radix cross Linux
The main Radix cross Linux repository contains the build scripts of packages, which have the most complete and common functionality for desktop machines
452 Commits
2 Branches
1 Tag