Index: 1.5.2-x86_32/zstd-x32-pkg-description.in
===================================================================
--- 1.5.2-x86_32/zstd-x32-pkg-description.in (revision 417)
+++ 1.5.2-x86_32/zstd-x32-pkg-description.in (nonexistent)
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
-# make exactly 11 lines for the formatting to be correct. It's also
-# customary to leave one space after the ':'.
-
- |-----handy-ruler------------------------------------------------------|
-zstd-x32: zstd-x32 @VERSION@ (real-time compression algorithm)
-zstd-x32:
-zstd-x32: Zstandard, or zstd for short, is a real-time compression algorithm
-zstd-x32: providing high compression ratios. It offers a very wide range of
-zstd-x32: compression/speed trade-off, while being backed by a very fast
-zstd-x32: decoder. It also offers a special mode for small data, called
-zstd-x32: dictionary compression, and can create dictionaries from any
-zstd-x32: sample set.
-zstd-x32:
-zstd-x32: Homepage: http://zstd.net
-zstd-x32:
Index: 1.5.2-x86_32/zstd-x32-pkg-install.sh
===================================================================
--- 1.5.2-x86_32/zstd-x32-pkg-install.sh (revision 417)
+++ 1.5.2-x86_32/zstd-x32-pkg-install.sh (nonexistent)
@@ -1,39 +0,0 @@
-#!/bin/sh
-
-# arg 1: the new package version
-pre_install() {
- /bin/true
-}
-
-# arg 1: the new package version
-post_install() {
- /bin/true
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-pre_update() {
- /bin/true
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-post_update() {
- post_install
-}
-
-# arg 1: the old package version
-pre_remove() {
- /bin/true
-}
-
-# arg 1: the old package version
-post_remove() {
- /bin/true
-}
-
-
-operation=$1
-shift
-
-$operation $*
Property changes on: 1.5.2-x86_32/zstd-x32-pkg-install.sh
___________________________________________________________________
Deleted: svn:executable
## -1 +0,0 ##
-*
\ No newline at end of property
Index: 1.5.2-x86_32/PATCHES
===================================================================
--- 1.5.2-x86_32/PATCHES (revision 417)
+++ 1.5.2-x86_32/PATCHES (nonexistent)
@@ -1,2 +0,0 @@
-
-../../../sources/packages/l/zstd/patches/zstd-1.5.2-pzstd.patch -p0
Index: 1.5.2-x86_32/Makefile
===================================================================
--- 1.5.2-x86_32/Makefile (revision 417)
+++ 1.5.2-x86_32/Makefile (nonexistent)
@@ -1,147 +0,0 @@
-
-COMPONENT_TARGETS = $(HARDWARE_INTEL_PC64)
-
-NEED_ABS_PATH = true
-COMPONENT_IS_3PP = true
-
-CREATE_X86_32_PACKAGE = true
-
-
-include ../../../build-system/constants.mk
-
-
-SOURCE_REQUIRES = sources/packages/l/zstd
-
-REQUIRES = libs/zstd/1.5.2
-REQUIRES += libs/lz4/1.9.4-x86_32
-REQUIRES += libs/zlib/1.3.1-x86_32
-REQUIRES += app/xz/5.2.7-x86_32
-
-# ======= __END_OF_REQUIRES__ =======
-
-
-version = 1.5.2
-tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/zstd/zstd-$(version).tar.xz
-SRC_ARCHIVE = $(tar_xz_archive)
-SRC_DIR = $(TARGET_BUILD_DIR)/zstd-$(version)
-src_dir_name = zstd-$(version)
-src_done = $(TARGET_BUILD_DIR)/.source_done
-
-PATCHES = PATCHES
-
-build_target = $(TARGET_BUILD_DIR)/.build_done
-install_target = $(TARGET_BUILD_DIR)/.install_done
-
-
-####### Targets
-
-PKG_GROUP = libs
-#
-# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
-#
-ZSTD_32_PKG_NAME = zstd-x32
-ZSTD_32_PKG_VERSION = 1.5.2
-ZSTD_32_PKG_ARCH = $(PKGARCH)
-ZSTD_32_PKG_DISTRO_NAME = $(DISTRO_NAME)
-ZSTD_32_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
-ZSTD_32_PKG_GROUP = $(PKG_GROUP)
-### |---handy-ruler-------------------------------|
-ZSTD_32_PKG_SHORT_DESCRIPTION = real-time compression algorithm
-ZSTD_32_PKG_URL = $(BUG_URL)
-ZSTD_32_PKG_LICENSE = GPLv2
-ZSTD_32_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(ZSTD_32_PKG_NAME)-pkg-description
-ZSTD_32_PKG_DESCRIPTION_FILE_IN = $(ZSTD_32_PKG_NAME)-pkg-description.in
-ZSTD_32_PKG_INSTALL_SCRIPT = $(ZSTD_32_PKG_NAME)-pkg-install.sh
-
-ZSTD_32_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(ZSTD_32_PKG_NAME)-package
-
-pkg_basename = $(ZSTD_32_PKG_NAME)-$(ZSTD_32_PKG_VERSION)-$(ZSTD_32_PKG_ARCH)-$(ZSTD_32_PKG_DISTRO_NAME)-$(ZSTD_32_PKG_DISTRO_VERSION)
-
-pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
-pkg_certificate = $(call cert-name,$(pkg_archive))
-pkg_signature = $(call sign-name,$(pkg_archive))
-pkg_description = $(call desc-name,$(pkg_archive))
-products = $(call pkg-files,$(pkg_archive))
-
-BUILD_TARGETS = $(build_target)
-BUILD_TARGETS += $(install_target)
-
-PRODUCT_TARGETS = $(products)
-
-ROOTFS_TARGETS = $(pkg_archive)
-
-
-include ../../../build-system/core.mk
-
-
-env_sysroot = DESTDIR=$(ZSTD_32_PKG)
-
-
-configure_switches = prefix=/usr
-configure_switches += libdir=/usr/lib$(MULTILIB_X86_32_SUFFIX)
-configure_switches += mandir=/usr/share/man
-configure_switches += bindir=/usr/bin/32
-
-
-####### Dependencies
-
-$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
- $(UNPACK_SRC_ARCHIVE)
- $(APPLY_PATCHES)
- @touch $@
-
-$(build_target): $(src_done)
- @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) $(configure_switches)
- @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) $(configure_switches) -C contrib/pzstd
- @touch $@
-
-$(install_target): $(build_target)
- @mkdir -p $(ZSTD_32_PKG)
- @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) $(configure_switches) -j1 install $(env_sysroot)
- @cd $(SRC_DIR) && install -Dm755 contrib/pzstd/pzstd $(ZSTD_32_PKG)/usr/bin/32/pzstd
-ifneq ($(__ENABLE_STATIC__),yes)
- @rm -f $(ZSTD_32_PKG)/usr/lib$(MULTILIB_X86_32_SUFFIX)/*.a
-endif
- @rm -rf $(ZSTD_32_PKG)/usr/include
- @rm -rf $(ZSTD_32_PKG)/usr/share
- # ======= Install the same to $(TARGET_DEST_DIR) =======
- $(call install-into-devenv, $(ZSTD_32_PKG))
- # ======= tune pkg-config *.pc search path to the target destination for development =======
- @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_X86_32_SUFFIX)/pkgconfig ; \
- sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libzstd.pc ; \
- )
- # ======= Strip binaries =======
- @( cd $(ZSTD_32_PKG) ; \
- find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
- find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
- )
-ifeq ($(__ENABLE_STATIC__),yes)
- @( cd $(ZSTD_32_PKG) ; \
- find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
- )
-endif
- @touch $@
-
-$(ZSTD_32_PKG_DESCRIPTION_FILE): $(ZSTD_32_PKG_DESCRIPTION_FILE_IN)
- @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
-
-$(pkg_certificate) : $(pkg_archive) ;
-$(pkg_signature) : $(pkg_archive) ;
-$(pkg_description) : $(pkg_archive) ;
-
-$(pkg_archive): $(install_target) $(ZSTD_32_PKG_DESCRIPTION_FILE) $(ZSTD_32_PKG_INSTALL_SCRIPT)
- @cp $(ZSTD_32_PKG_DESCRIPTION_FILE) $(ZSTD_32_PKG)/.DESCRIPTION
- @cp $(ZSTD_32_PKG_INSTALL_SCRIPT) $(ZSTD_32_PKG)/.INSTALL
- @$(BUILD_PKG_REQUIRES) $(ZSTD_32_PKG)/.REQUIRES
- @echo "pkgname=$(ZSTD_32_PKG_NAME)" > $(ZSTD_32_PKG)/.PKGINFO ; \
- echo "pkgver=$(ZSTD_32_PKG_VERSION)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
- echo "arch=$(ZSTD_32_PKG_ARCH)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
- echo "distroname=$(ZSTD_32_PKG_DISTRO_NAME)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
- echo "distrover=$(ZSTD_32_PKG_DISTRO_VERSION)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
- echo "group=$(ZSTD_32_PKG_GROUP)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
- echo "short_description=\"$(ZSTD_32_PKG_SHORT_DESCRIPTION)\"" >> $(ZSTD_32_PKG)/.PKGINFO ; \
- echo "url=$(ZSTD_32_PKG_URL)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
- echo "license=$(ZSTD_32_PKG_LICENSE)" >> $(ZSTD_32_PKG)/.PKGINFO
- @$(PSEUDO) sh -c "cd $(ZSTD_32_PKG) && \
- chown -R root:root . && \
- $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 1.5.2-x86_32
===================================================================
--- 1.5.2-x86_32 (revision 417)
+++ 1.5.2-x86_32 (nonexistent)
Property changes on: 1.5.2-x86_32
___________________________________________________________________
Deleted: svn:ignore
## -1,74 +0,0 ##
-
-# install dir
-dist
-
-# Target build dirs
-.a1x-newlib
-.a2x-newlib
-.at91sam7s-newlib
-
-.build-machine
-
-.a1x-glibc
-.a2x-glibc
-.h3-glibc
-.h5-glibc
-.i586-glibc
-.i686-glibc
-.imx6-glibc
-.jz47xx-glibc
-.makefile
-.am335x-glibc
-.omap543x-glibc
-.p5600-glibc
-.power8-glibc
-.power8le-glibc
-.power9-glibc
-.power9le-glibc
-.m1000-glibc
-.riscv64-glibc
-.rk328x-glibc
-.rk33xx-glibc
-.rk339x-glibc
-.rk358x-glibc
-.s8xx-glibc
-.s9xx-glibc
-.x86_64-glibc
-
-# Hidden files (each file)
-.makefile
-.dist
-.rootfs
-
-# src & hw requires
-.src_requires
-.src_requires_depend
-.requires
-.requires_depend
-
-# Tarballs
-*.gz
-*.bz2
-*.lz
-*.xz
-*.tgz
-*.txz
-
-# Signatures
-*.asc
-*.sig
-*.sign
-*.sha1sum
-
-# Patches
-*.patch
-
-# Descriptions
-*.dsc
-*.txt
-
-# Default linux config files
-*.defconfig
-
-# backup copies
-*~
Index: 1.5.2/PATCHES
===================================================================
--- 1.5.2/PATCHES (revision 417)
+++ 1.5.2/PATCHES (nonexistent)
@@ -1,2 +0,0 @@
-
-../../../sources/packages/l/zstd/patches/zstd-1.5.2-pzstd.patch -p0
Index: 1.5.2/zstd-pkg-description.in
===================================================================
--- 1.5.2/zstd-pkg-description.in (revision 417)
+++ 1.5.2/zstd-pkg-description.in (nonexistent)
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
-# make exactly 11 lines for the formatting to be correct. It's also
-# customary to leave one space after the ':'.
-
- |-----handy-ruler------------------------------------------------------|
-zstd: zstd @VERSION@ (real-time compression algorithm)
-zstd:
-zstd: Zstandard, or zstd for short, is a real-time compression algorithm
-zstd: providing high compression ratios. It offers a very wide range of
-zstd: compression/speed trade-off, while being backed by a very fast
-zstd: decoder. It also offers a special mode for small data, called
-zstd: dictionary compression, and can create dictionaries from any
-zstd: sample set.
-zstd:
-zstd: Homepage: http://zstd.net
-zstd:
Index: 1.5.2/zstd-pkg-install.sh
===================================================================
--- 1.5.2/zstd-pkg-install.sh (revision 417)
+++ 1.5.2/zstd-pkg-install.sh (nonexistent)
@@ -1,39 +0,0 @@
-#!/bin/sh
-
-# arg 1: the new package version
-pre_install() {
- /bin/true
-}
-
-# arg 1: the new package version
-post_install() {
- /bin/true
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-pre_update() {
- /bin/true
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-post_update() {
- post_install
-}
-
-# arg 1: the old package version
-pre_remove() {
- /bin/true
-}
-
-# arg 1: the old package version
-post_remove() {
- /bin/true
-}
-
-
-operation=$1
-shift
-
-$operation $*
Property changes on: 1.5.2/zstd-pkg-install.sh
___________________________________________________________________
Deleted: svn:executable
## -1 +0,0 ##
-*
\ No newline at end of property
Index: 1.5.2/Makefile
===================================================================
--- 1.5.2/Makefile (revision 417)
+++ 1.5.2/Makefile (nonexistent)
@@ -1,225 +0,0 @@
-
-COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
-COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
-COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
-COMPONENT_TARGETS += $(HARDWARE_CB1X)
-COMPONENT_TARGETS += $(HARDWARE_CB2X)
-COMPONENT_TARGETS += $(HARDWARE_CB3X)
-COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
-COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
-COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
-COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
-COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
-COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
-COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
-COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
-COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
-COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
-COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
-COMPONENT_TARGETS += $(HARDWARE_POIN2)
-COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
-COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
-COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
-COMPONENT_TARGETS += $(HARDWARE_M201)
-COMPONENT_TARGETS += $(HARDWARE_MXV)
-COMPONENT_TARGETS += $(HARDWARE_P201)
-COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
-COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
-COMPONENT_TARGETS += $(HARDWARE_P212)
-COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
-COMPONENT_TARGETS += $(HARDWARE_Q201)
-COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
-COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
-COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
-COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
-COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
-COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
-COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
-COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
-COMPONENT_TARGETS += $(HARDWARE_CI20)
-COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
-COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
-COMPONENT_TARGETS += $(HARDWARE_S824L)
-COMPONENT_TARGETS += $(HARDWARE_VESNIN)
-COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
-COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
-COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
-COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
-COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
-COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
-COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
-COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
-
-
-NEED_ABS_PATH = true
-COMPONENT_IS_3PP = true
-
-
-include ../../../build-system/constants.mk
-
-
-SOURCE_REQUIRES = sources/packages/l/zstd
-
-REQUIRES = libs/lz4/1.9.4
-REQUIRES += libs/zlib/1.3.1
-REQUIRES += app/xz/5.2.7
-
-# ======= __END_OF_REQUIRES__ =======
-
-
-version = 1.5.2
-tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/zstd/zstd-$(version).tar.xz
-SRC_ARCHIVE = $(tar_xz_archive)
-SRC_DIR = $(TARGET_BUILD_DIR)/zstd-$(version)
-src_dir_name = zstd-$(version)
-src_done = $(TARGET_BUILD_DIR)/.source_done
-
-PATCHES = PATCHES
-
-build_target = $(TARGET_BUILD_DIR)/.build_done
-install_target = $(TARGET_BUILD_DIR)/.install_done
-
-
-####### Targets
-
-PKG_GROUP = libs
-
-#
-# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
-#
-ZSTD_PKG_NAME = zstd
-ZSTD_PKG_VERSION = 1.5.2
-ZSTD_PKG_ARCH = $(PKGARCH)
-ZSTD_PKG_DISTRO_NAME = $(DISTRO_NAME)
-ZSTD_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
-ZSTD_PKG_GROUP = $(PKG_GROUP)
-### |---handy-ruler-------------------------------|
-ZSTD_PKG_SHORT_DESCRIPTION = real-time compression algorithm
-ZSTD_PKG_URL = $(BUG_URL)
-ZSTD_PKG_LICENSE = GPLv2
-ZSTD_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(ZSTD_PKG_NAME)-pkg-description
-ZSTD_PKG_DESCRIPTION_FILE_IN = $(ZSTD_PKG_NAME)-pkg-description.in
-ZSTD_PKG_INSTALL_SCRIPT = $(ZSTD_PKG_NAME)-pkg-install.sh
-
-ZSTD_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(ZSTD_PKG_NAME)-package
-
-pkg_basename = $(ZSTD_PKG_NAME)-$(ZSTD_PKG_VERSION)-$(ZSTD_PKG_ARCH)-$(ZSTD_PKG_DISTRO_NAME)-$(ZSTD_PKG_DISTRO_VERSION)
-
-pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
-pkg_certificate = $(call cert-name,$(pkg_archive))
-pkg_signature = $(call sign-name,$(pkg_archive))
-pkg_description = $(call desc-name,$(pkg_archive))
-products = $(call pkg-files,$(pkg_archive))
-
-BUILD_TARGETS = $(build_target)
-BUILD_TARGETS += $(install_target)
-
-PRODUCT_TARGETS = $(products)
-
-ROOTFS_TARGETS = $(pkg_archive)
-
-
-include ../../../build-system/core.mk
-
-
-env_sysroot = DESTDIR=$(ZSTD_PKG)
-
-
-configure_switches = prefix=/usr
-configure_switches += libdir=/usr/lib$(LIBSUFFIX)
-configure_switches += mandir=/usr/share/man
-
-
-####### Dependencies
-
-$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
- $(UNPACK_SRC_ARCHIVE)
- $(APPLY_PATCHES)
- @touch $@
-
-$(build_target): $(src_done)
- @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) $(configure_switches)
- @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) $(configure_switches) -C contrib/pzstd
- @touch $@
-
-$(install_target): $(build_target)
- @mkdir -p $(ZSTD_PKG)
- @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) $(configure_switches) -j1 install $(env_sysroot)
- @cd $(SRC_DIR) && install -Dm755 contrib/pzstd/pzstd $(ZSTD_PKG)/usr/bin/pzstd
-ifneq ($(__ENABLE_STATIC__),yes)
- @rm -f $(ZSTD_PKG)/usr/lib$(LIBSUFFIX)/*.a
-endif
- # ======= Install Documentation =======
- @if [ -d $(ZSTD_PKG)/usr/share/man ]; then \
- ( cd $(ZSTD_PKG)/usr/share/man ; \
- for manpagedir in `find . -type d -name "man*"` ; do \
- ( cd $$manpagedir ; \
- for eachpage in `find . -type l -maxdepth 1` ; do \
- ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
- rm $$eachpage ; \
- done ; \
- gzip -9 *.? ; \
- ) \
- done \
- ) \
- fi
- @mkdir -p $(ZSTD_PKG)/usr/doc/$(src_dir_name)
- @cp -a $(SRC_DIR)/COPYING $(SRC_DIR)/LICENSE \
- $(ZSTD_PKG)/usr/doc/$(src_dir_name)
- @rm -rf $(ZSTD_PKG)/usr/share/doc/$(src_dir_name)
- @mkdir -p $(ZSTD_PKG)/usr/share/doc/$(src_dir_name)
- @( cd $(SRC_DIR) ; \
- cp -a COPYING LICENSE *.md doc \
- $(ZSTD_PKG)/usr/share/doc/$(src_dir_name) ; \
- )
- @( cd $(ZSTD_PKG)/usr/share/doc/$(src_dir_name) ; \
- mv doc html ; \
- )
- @( cd $(SRC_DIR) ; \
- if [ -r CHANGELOG ]; then \
- DOCSDIR=`echo $(ZSTD_PKG)/usr/share/doc/$(src_dir_name)` ; \
- cat CHANGELOG | head -n 1000 > $$DOCSDIR/CHANGELOG ; \
- touch -r CHANGELOG $$DOCSDIR/CHANGELOG ; \
- fi \
- )
- # ======= Install the same to $(TARGET_DEST_DIR) =======
- $(call install-into-devenv, $(ZSTD_PKG))
- # ======= tune pkg-config *.pc search path to the target destination for development =======
- @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
- sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libzstd.pc ; \
- )
- # ======= Strip binaries =======
- @( cd $(ZSTD_PKG) ; \
- find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
- find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
- )
-ifeq ($(__ENABLE_STATIC__),yes)
- @( cd $(ZSTD_PKG) ; \
- find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
- )
-endif
- @touch $@
-
-$(ZSTD_PKG_DESCRIPTION_FILE): $(ZSTD_PKG_DESCRIPTION_FILE_IN)
- @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
-
-$(pkg_certificate) : $(pkg_archive) ;
-$(pkg_signature) : $(pkg_archive) ;
-$(pkg_description) : $(pkg_archive) ;
-
-$(pkg_archive): $(install_target) $(ZSTD_PKG_DESCRIPTION_FILE) $(ZSTD_PKG_INSTALL_SCRIPT)
- @cp $(ZSTD_PKG_DESCRIPTION_FILE) $(ZSTD_PKG)/.DESCRIPTION
- @cp $(ZSTD_PKG_INSTALL_SCRIPT) $(ZSTD_PKG)/.INSTALL
- @$(BUILD_PKG_REQUIRES) $(ZSTD_PKG)/.REQUIRES
- @echo "pkgname=$(ZSTD_PKG_NAME)" > $(ZSTD_PKG)/.PKGINFO ; \
- echo "pkgver=$(ZSTD_PKG_VERSION)" >> $(ZSTD_PKG)/.PKGINFO ; \
- echo "arch=$(ZSTD_PKG_ARCH)" >> $(ZSTD_PKG)/.PKGINFO ; \
- echo "distroname=$(ZSTD_PKG_DISTRO_NAME)" >> $(ZSTD_PKG)/.PKGINFO ; \
- echo "distrover=$(ZSTD_PKG_DISTRO_VERSION)" >> $(ZSTD_PKG)/.PKGINFO ; \
- echo "group=$(ZSTD_PKG_GROUP)" >> $(ZSTD_PKG)/.PKGINFO ; \
- echo "short_description=\"$(ZSTD_PKG_SHORT_DESCRIPTION)\"" >> $(ZSTD_PKG)/.PKGINFO ; \
- echo "url=$(ZSTD_PKG_URL)" >> $(ZSTD_PKG)/.PKGINFO ; \
- echo "license=$(ZSTD_PKG_LICENSE)" >> $(ZSTD_PKG)/.PKGINFO
- @$(PSEUDO) sh -c "cd $(ZSTD_PKG) && \
- chown -R root:root . && \
- $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 1.5.2
===================================================================
--- 1.5.2 (revision 417)
+++ 1.5.2 (nonexistent)
Property changes on: 1.5.2
___________________________________________________________________
Deleted: svn:ignore
## -1,74 +0,0 ##
-
-# install dir
-dist
-
-# Target build dirs
-.a1x-newlib
-.a2x-newlib
-.at91sam7s-newlib
-
-.build-machine
-
-.a1x-glibc
-.a2x-glibc
-.h3-glibc
-.h5-glibc
-.i586-glibc
-.i686-glibc
-.imx6-glibc
-.jz47xx-glibc
-.makefile
-.am335x-glibc
-.omap543x-glibc
-.p5600-glibc
-.power8-glibc
-.power8le-glibc
-.power9-glibc
-.power9le-glibc
-.m1000-glibc
-.riscv64-glibc
-.rk328x-glibc
-.rk33xx-glibc
-.rk339x-glibc
-.rk358x-glibc
-.s8xx-glibc
-.s9xx-glibc
-.x86_64-glibc
-
-# Hidden files (each file)
-.makefile
-.dist
-.rootfs
-
-# src & hw requires
-.src_requires
-.src_requires_depend
-.requires
-.requires_depend
-
-# Tarballs
-*.gz
-*.bz2
-*.lz
-*.xz
-*.tgz
-*.txz
-
-# Signatures
-*.asc
-*.sig
-*.sign
-*.sha1sum
-
-# Patches
-*.patch
-
-# Descriptions
-*.dsc
-*.txt
-
-# Default linux config files
-*.defconfig
-
-# backup copies
-*~
Index: 1.5.2-ppc32/zstd-x32-pkg-description.in
===================================================================
--- 1.5.2-ppc32/zstd-x32-pkg-description.in (revision 417)
+++ 1.5.2-ppc32/zstd-x32-pkg-description.in (nonexistent)
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
-# make exactly 11 lines for the formatting to be correct. It's also
-# customary to leave one space after the ':'.
-
- |-----handy-ruler------------------------------------------------------|
-zstd-x32: zstd-x32 @VERSION@ (real-time compression algorithm)
-zstd-x32:
-zstd-x32: Zstandard, or zstd for short, is a real-time compression algorithm
-zstd-x32: providing high compression ratios. It offers a very wide range of
-zstd-x32: compression/speed trade-off, while being backed by a very fast
-zstd-x32: decoder. It also offers a special mode for small data, called
-zstd-x32: dictionary compression, and can create dictionaries from any
-zstd-x32: sample set.
-zstd-x32:
-zstd-x32: Homepage: http://zstd.net
-zstd-x32:
Index: 1.5.2-ppc32/zstd-x32-pkg-install.sh
===================================================================
--- 1.5.2-ppc32/zstd-x32-pkg-install.sh (revision 417)
+++ 1.5.2-ppc32/zstd-x32-pkg-install.sh (nonexistent)
@@ -1,39 +0,0 @@
-#!/bin/sh
-
-# arg 1: the new package version
-pre_install() {
- /bin/true
-}
-
-# arg 1: the new package version
-post_install() {
- /bin/true
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-pre_update() {
- /bin/true
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-post_update() {
- post_install
-}
-
-# arg 1: the old package version
-pre_remove() {
- /bin/true
-}
-
-# arg 1: the old package version
-post_remove() {
- /bin/true
-}
-
-
-operation=$1
-shift
-
-$operation $*
Property changes on: 1.5.2-ppc32/zstd-x32-pkg-install.sh
___________________________________________________________________
Deleted: svn:executable
## -1 +0,0 ##
-*
\ No newline at end of property
Index: 1.5.2-ppc32/PATCHES
===================================================================
--- 1.5.2-ppc32/PATCHES (revision 417)
+++ 1.5.2-ppc32/PATCHES (nonexistent)
@@ -1,2 +0,0 @@
-
-../../../sources/packages/l/zstd/patches/zstd-1.5.2-pzstd.patch -p0
Index: 1.5.2-ppc32/Makefile
===================================================================
--- 1.5.2-ppc32/Makefile (revision 417)
+++ 1.5.2-ppc32/Makefile (nonexistent)
@@ -1,150 +0,0 @@
-
-COMPONENT_TARGETS = $(HARDWARE_S824L)
-COMPONENT_TARGETS += $(HARDWARE_VESNIN)
-COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
-COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
-
-NEED_ABS_PATH = true
-COMPONENT_IS_3PP = true
-
-CREATE_PPC32_PACKAGE = true
-
-
-include ../../../build-system/constants.mk
-
-
-SOURCE_REQUIRES = sources/packages/l/zstd
-
-REQUIRES = libs/zstd/1.5.2
-REQUIRES += libs/lz4/1.9.4-ppc32
-REQUIRES += libs/zlib/1.3.1-ppc32
-REQUIRES += app/xz/5.2.7-ppc32
-
-# ======= __END_OF_REQUIRES__ =======
-
-
-version = 1.5.2
-tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/zstd/zstd-$(version).tar.xz
-SRC_ARCHIVE = $(tar_xz_archive)
-SRC_DIR = $(TARGET_BUILD_DIR)/zstd-$(version)
-src_dir_name = zstd-$(version)
-src_done = $(TARGET_BUILD_DIR)/.source_done
-
-PATCHES = PATCHES
-
-build_target = $(TARGET_BUILD_DIR)/.build_done
-install_target = $(TARGET_BUILD_DIR)/.install_done
-
-
-####### Targets
-
-PKG_GROUP = libs
-#
-# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
-#
-ZSTD_32_PKG_NAME = zstd-x32
-ZSTD_32_PKG_VERSION = 1.5.2
-ZSTD_32_PKG_ARCH = $(PKGARCH)
-ZSTD_32_PKG_DISTRO_NAME = $(DISTRO_NAME)
-ZSTD_32_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
-ZSTD_32_PKG_GROUP = $(PKG_GROUP)
-### |---handy-ruler-------------------------------|
-ZSTD_32_PKG_SHORT_DESCRIPTION = real-time compression algorithm
-ZSTD_32_PKG_URL = $(BUG_URL)
-ZSTD_32_PKG_LICENSE = GPLv2
-ZSTD_32_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(ZSTD_32_PKG_NAME)-pkg-description
-ZSTD_32_PKG_DESCRIPTION_FILE_IN = $(ZSTD_32_PKG_NAME)-pkg-description.in
-ZSTD_32_PKG_INSTALL_SCRIPT = $(ZSTD_32_PKG_NAME)-pkg-install.sh
-
-ZSTD_32_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(ZSTD_32_PKG_NAME)-package
-
-pkg_basename = $(ZSTD_32_PKG_NAME)-$(ZSTD_32_PKG_VERSION)-$(ZSTD_32_PKG_ARCH)-$(ZSTD_32_PKG_DISTRO_NAME)-$(ZSTD_32_PKG_DISTRO_VERSION)
-
-pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
-pkg_certificate = $(call cert-name,$(pkg_archive))
-pkg_signature = $(call sign-name,$(pkg_archive))
-pkg_description = $(call desc-name,$(pkg_archive))
-products = $(call pkg-files,$(pkg_archive))
-
-BUILD_TARGETS = $(build_target)
-BUILD_TARGETS += $(install_target)
-
-PRODUCT_TARGETS = $(products)
-
-ROOTFS_TARGETS = $(pkg_archive)
-
-
-include ../../../build-system/core.mk
-
-
-env_sysroot = DESTDIR=$(ZSTD_32_PKG)
-
-
-configure_switches = prefix=/usr
-configure_switches += libdir=/usr/lib$(MULTILIB_PPC32_SUFFIX)
-configure_switches += mandir=/usr/share/man
-configure_switches += bindir=/usr/bin/32
-
-
-####### Dependencies
-
-$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
- $(UNPACK_SRC_ARCHIVE)
- $(APPLY_PATCHES)
- @touch $@
-
-$(build_target): $(src_done)
- @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) $(configure_switches)
- @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) $(configure_switches) -C contrib/pzstd
- @touch $@
-
-$(install_target): $(build_target)
- @mkdir -p $(ZSTD_32_PKG)
- @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) $(configure_switches) -j1 install $(env_sysroot)
- @cd $(SRC_DIR) && install -Dm755 contrib/pzstd/pzstd $(ZSTD_32_PKG)/usr/bin/32/pzstd
-ifneq ($(__ENABLE_STATIC__),yes)
- @rm -f $(ZSTD_32_PKG)/usr/lib$(MULTILIB_PPC32_SUFFIX)/*.a
-endif
- @rm -rf $(ZSTD_32_PKG)/usr/include
- @rm -rf $(ZSTD_32_PKG)/usr/share
- # ======= Install the same to $(TARGET_DEST_DIR) =======
- $(call install-into-devenv, $(ZSTD_32_PKG))
- # ======= tune pkg-config *.pc search path to the target destination for development =======
- @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_PPC32_SUFFIX)/pkgconfig ; \
- sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libzstd.pc ; \
- )
- # ======= Strip binaries =======
- @( cd $(ZSTD_32_PKG) ; \
- find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
- find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
- )
-ifeq ($(__ENABLE_STATIC__),yes)
- @( cd $(ZSTD_32_PKG) ; \
- find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
- )
-endif
- @touch $@
-
-$(ZSTD_32_PKG_DESCRIPTION_FILE): $(ZSTD_32_PKG_DESCRIPTION_FILE_IN)
- @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
-
-$(pkg_certificate) : $(pkg_archive) ;
-$(pkg_signature) : $(pkg_archive) ;
-$(pkg_description) : $(pkg_archive) ;
-
-$(pkg_archive): $(install_target) $(ZSTD_32_PKG_DESCRIPTION_FILE) $(ZSTD_32_PKG_INSTALL_SCRIPT)
- @cp $(ZSTD_32_PKG_DESCRIPTION_FILE) $(ZSTD_32_PKG)/.DESCRIPTION
- @cp $(ZSTD_32_PKG_INSTALL_SCRIPT) $(ZSTD_32_PKG)/.INSTALL
- @$(BUILD_PKG_REQUIRES) $(ZSTD_32_PKG)/.REQUIRES
- @echo "pkgname=$(ZSTD_32_PKG_NAME)" > $(ZSTD_32_PKG)/.PKGINFO ; \
- echo "pkgver=$(ZSTD_32_PKG_VERSION)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
- echo "arch=$(ZSTD_32_PKG_ARCH)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
- echo "distroname=$(ZSTD_32_PKG_DISTRO_NAME)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
- echo "distrover=$(ZSTD_32_PKG_DISTRO_VERSION)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
- echo "group=$(ZSTD_32_PKG_GROUP)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
- echo "short_description=\"$(ZSTD_32_PKG_SHORT_DESCRIPTION)\"" >> $(ZSTD_32_PKG)/.PKGINFO ; \
- echo "url=$(ZSTD_32_PKG_URL)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
- echo "license=$(ZSTD_32_PKG_LICENSE)" >> $(ZSTD_32_PKG)/.PKGINFO
- @$(PSEUDO) sh -c "cd $(ZSTD_32_PKG) && \
- chown -R root:root . && \
- $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 1.5.2-ppc32
===================================================================
--- 1.5.2-ppc32 (revision 417)
+++ 1.5.2-ppc32 (nonexistent)
Property changes on: 1.5.2-ppc32
___________________________________________________________________
Deleted: svn:ignore
## -1,74 +0,0 ##
-
-# install dir
-dist
-
-# Target build dirs
-.a1x-newlib
-.a2x-newlib
-.at91sam7s-newlib
-
-.build-machine
-
-.a1x-glibc
-.a2x-glibc
-.h3-glibc
-.h5-glibc
-.i586-glibc
-.i686-glibc
-.imx6-glibc
-.jz47xx-glibc
-.makefile
-.am335x-glibc
-.omap543x-glibc
-.p5600-glibc
-.power8-glibc
-.power8le-glibc
-.power9-glibc
-.power9le-glibc
-.m1000-glibc
-.riscv64-glibc
-.rk328x-glibc
-.rk33xx-glibc
-.rk339x-glibc
-.rk358x-glibc
-.s8xx-glibc
-.s9xx-glibc
-.x86_64-glibc
-
-# Hidden files (each file)
-.makefile
-.dist
-.rootfs
-
-# src & hw requires
-.src_requires
-.src_requires_depend
-.requires
-.requires_depend
-
-# Tarballs
-*.gz
-*.bz2
-*.lz
-*.xz
-*.tgz
-*.txz
-
-# Signatures
-*.asc
-*.sig
-*.sign
-*.sha1sum
-
-# Patches
-*.patch
-
-# Descriptions
-*.dsc
-*.txt
-
-# Default linux config files
-*.defconfig
-
-# backup copies
-*~
Index: 1.5.6/Makefile
===================================================================
--- 1.5.6/Makefile (nonexistent)
+++ 1.5.6/Makefile (revision 418)
@@ -0,0 +1,230 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
+COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/l/zstd
+
+REQUIRES = libs/lz4/1.10.0
+REQUIRES += libs/zlib/1.3.1
+REQUIRES += app/xz/5.6.3
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 1.5.6
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/zstd/zstd-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/zstd-$(version)
+src_dir_name = zstd-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = libs
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+ZSTD_PKG_NAME = zstd
+ZSTD_PKG_VERSION = 1.5.6
+ZSTD_PKG_ARCH = $(PKGARCH)
+ZSTD_PKG_DISTRO_NAME = $(DISTRO_NAME)
+ZSTD_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+ZSTD_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+ZSTD_PKG_SHORT_DESCRIPTION = real-time compression algorithm
+ZSTD_PKG_URL = $(BUG_URL)
+ZSTD_PKG_LICENSE = GPLv2
+ZSTD_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(ZSTD_PKG_NAME)-pkg-description
+ZSTD_PKG_DESCRIPTION_FILE_IN = $(ZSTD_PKG_NAME)-pkg-description.in
+ZSTD_PKG_INSTALL_SCRIPT = $(ZSTD_PKG_NAME)-pkg-install.sh
+
+ZSTD_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(ZSTD_PKG_NAME)-package
+
+pkg_basename = $(ZSTD_PKG_NAME)-$(ZSTD_PKG_VERSION)-$(ZSTD_PKG_ARCH)-$(ZSTD_PKG_DISTRO_NAME)-$(ZSTD_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(ZSTD_PKG)
+
+
+configure_switches = prefix=/usr
+configure_switches += libdir=/usr/lib$(LIBSUFFIX)
+configure_switches += mandir=/usr/share/man
+
+
+TARGET_BIN_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_BIN_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) $(configure_switches)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) $(configure_switches) -C contrib/pzstd
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(ZSTD_PKG)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) $(configure_switches) -j1 install $(env_sysroot)
+ @cd $(SRC_DIR) && install -Dm755 contrib/pzstd/pzstd $(ZSTD_PKG)/usr/bin/pzstd
+ifneq ($(__ENABLE_STATIC__),yes)
+ @rm -f $(ZSTD_PKG)/usr/lib$(LIBSUFFIX)/*.a
+endif
+ # ======= Install Documentation =======
+ @if [ -d $(ZSTD_PKG)/usr/share/man ]; then \
+ ( cd $(ZSTD_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(ZSTD_PKG)/usr/doc/$(src_dir_name)
+ @cp -a $(SRC_DIR)/COPYING $(SRC_DIR)/LICENSE \
+ $(ZSTD_PKG)/usr/doc/$(src_dir_name)
+ @rm -rf $(ZSTD_PKG)/usr/share/doc/$(src_dir_name)
+ @mkdir -p $(ZSTD_PKG)/usr/share/doc/$(src_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a COPYING LICENSE *.md doc \
+ $(ZSTD_PKG)/usr/share/doc/$(src_dir_name) ; \
+ )
+ @( cd $(ZSTD_PKG)/usr/share/doc/$(src_dir_name) ; \
+ mv doc html ; \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r CHANGELOG ]; then \
+ DOCSDIR=`echo $(ZSTD_PKG)/usr/share/doc/$(src_dir_name)` ; \
+ cat CHANGELOG | head -n 1000 > $$DOCSDIR/CHANGELOG ; \
+ touch -r CHANGELOG $$DOCSDIR/CHANGELOG ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(ZSTD_PKG))
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libzstd.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(ZSTD_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(ZSTD_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ @touch $@
+
+$(ZSTD_PKG_DESCRIPTION_FILE): $(ZSTD_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(ZSTD_PKG_DESCRIPTION_FILE) $(ZSTD_PKG_INSTALL_SCRIPT)
+ @cp $(ZSTD_PKG_DESCRIPTION_FILE) $(ZSTD_PKG)/.DESCRIPTION
+ @cp $(ZSTD_PKG_INSTALL_SCRIPT) $(ZSTD_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(ZSTD_PKG)/.REQUIRES
+ @echo "pkgname=$(ZSTD_PKG_NAME)" > $(ZSTD_PKG)/.PKGINFO ; \
+ echo "pkgver=$(ZSTD_PKG_VERSION)" >> $(ZSTD_PKG)/.PKGINFO ; \
+ echo "arch=$(ZSTD_PKG_ARCH)" >> $(ZSTD_PKG)/.PKGINFO ; \
+ echo "distroname=$(ZSTD_PKG_DISTRO_NAME)" >> $(ZSTD_PKG)/.PKGINFO ; \
+ echo "distrover=$(ZSTD_PKG_DISTRO_VERSION)" >> $(ZSTD_PKG)/.PKGINFO ; \
+ echo "group=$(ZSTD_PKG_GROUP)" >> $(ZSTD_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(ZSTD_PKG_SHORT_DESCRIPTION)\"" >> $(ZSTD_PKG)/.PKGINFO ; \
+ echo "url=$(ZSTD_PKG_URL)" >> $(ZSTD_PKG)/.PKGINFO ; \
+ echo "license=$(ZSTD_PKG_LICENSE)" >> $(ZSTD_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(ZSTD_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 1.5.6/PATCHES
===================================================================
--- 1.5.6/PATCHES (nonexistent)
+++ 1.5.6/PATCHES (revision 418)
@@ -0,0 +1,2 @@
+
+../../../sources/packages/l/zstd/patches/zstd-1.5.6-pzstd.patch -p0
Index: 1.5.6/zstd-pkg-description.in
===================================================================
--- 1.5.6/zstd-pkg-description.in (nonexistent)
+++ 1.5.6/zstd-pkg-description.in (revision 418)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+zstd: zstd @VERSION@ (real-time compression algorithm)
+zstd:
+zstd: Zstandard, or zstd for short, is a real-time compression algorithm
+zstd: providing high compression ratios. It offers a very wide range of
+zstd: compression/speed trade-off, while being backed by a very fast
+zstd: decoder. It also offers a special mode for small data, called
+zstd: dictionary compression, and can create dictionaries from any
+zstd: sample set.
+zstd:
+zstd: Homepage: http://zstd.net
+zstd:
Index: 1.5.6/zstd-pkg-install.sh
===================================================================
--- 1.5.6/zstd-pkg-install.sh (nonexistent)
+++ 1.5.6/zstd-pkg-install.sh (revision 418)
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: 1.5.6/zstd-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 1.5.6
===================================================================
--- 1.5.6 (nonexistent)
+++ 1.5.6 (revision 418)
Property changes on: 1.5.6
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: 1.5.6-ppc32/Makefile
===================================================================
--- 1.5.6-ppc32/Makefile (nonexistent)
+++ 1.5.6-ppc32/Makefile (revision 418)
@@ -0,0 +1,155 @@
+
+COMPONENT_TARGETS = $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+CREATE_PPC32_PACKAGE = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/l/zstd
+
+REQUIRES = libs/zstd/1.5.6
+REQUIRES += libs/lz4/1.10.0-ppc32
+REQUIRES += libs/zlib/1.3.1-ppc32
+REQUIRES += app/xz/5.6.3-ppc32
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 1.5.6
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/zstd/zstd-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/zstd-$(version)
+src_dir_name = zstd-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = libs
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+ZSTD_32_PKG_NAME = zstd-x32
+ZSTD_32_PKG_VERSION = 1.5.6
+ZSTD_32_PKG_ARCH = $(PKGARCH)
+ZSTD_32_PKG_DISTRO_NAME = $(DISTRO_NAME)
+ZSTD_32_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+ZSTD_32_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+ZSTD_32_PKG_SHORT_DESCRIPTION = real-time compression algorithm
+ZSTD_32_PKG_URL = $(BUG_URL)
+ZSTD_32_PKG_LICENSE = GPLv2
+ZSTD_32_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(ZSTD_32_PKG_NAME)-pkg-description
+ZSTD_32_PKG_DESCRIPTION_FILE_IN = $(ZSTD_32_PKG_NAME)-pkg-description.in
+ZSTD_32_PKG_INSTALL_SCRIPT = $(ZSTD_32_PKG_NAME)-pkg-install.sh
+
+ZSTD_32_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(ZSTD_32_PKG_NAME)-package
+
+pkg_basename = $(ZSTD_32_PKG_NAME)-$(ZSTD_32_PKG_VERSION)-$(ZSTD_32_PKG_ARCH)-$(ZSTD_32_PKG_DISTRO_NAME)-$(ZSTD_32_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(ZSTD_32_PKG)
+
+
+configure_switches = prefix=/usr
+configure_switches += libdir=/usr/lib$(MULTILIB_PPC32_SUFFIX)
+configure_switches += mandir=/usr/share/man
+configure_switches += bindir=/usr/bin/32
+
+
+TARGET_BIN_RPATH = /lib$(MULTILIB_PPC32_SUFFIX):/usr/lib$(MULTILIB_PPC32_SUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_BIN_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) $(configure_switches)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) $(configure_switches) -C contrib/pzstd
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(ZSTD_32_PKG)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) $(configure_switches) -j1 install $(env_sysroot)
+ @cd $(SRC_DIR) && install -Dm755 contrib/pzstd/pzstd $(ZSTD_32_PKG)/usr/bin/32/pzstd
+ifneq ($(__ENABLE_STATIC__),yes)
+ @rm -f $(ZSTD_32_PKG)/usr/lib$(MULTILIB_PPC32_SUFFIX)/*.a
+endif
+ @rm -rf $(ZSTD_32_PKG)/usr/include
+ @rm -rf $(ZSTD_32_PKG)/usr/share
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(ZSTD_32_PKG))
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_PPC32_SUFFIX)/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libzstd.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(ZSTD_32_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(ZSTD_32_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ @touch $@
+
+$(ZSTD_32_PKG_DESCRIPTION_FILE): $(ZSTD_32_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(ZSTD_32_PKG_DESCRIPTION_FILE) $(ZSTD_32_PKG_INSTALL_SCRIPT)
+ @cp $(ZSTD_32_PKG_DESCRIPTION_FILE) $(ZSTD_32_PKG)/.DESCRIPTION
+ @cp $(ZSTD_32_PKG_INSTALL_SCRIPT) $(ZSTD_32_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(ZSTD_32_PKG)/.REQUIRES
+ @echo "pkgname=$(ZSTD_32_PKG_NAME)" > $(ZSTD_32_PKG)/.PKGINFO ; \
+ echo "pkgver=$(ZSTD_32_PKG_VERSION)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
+ echo "arch=$(ZSTD_32_PKG_ARCH)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
+ echo "distroname=$(ZSTD_32_PKG_DISTRO_NAME)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
+ echo "distrover=$(ZSTD_32_PKG_DISTRO_VERSION)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
+ echo "group=$(ZSTD_32_PKG_GROUP)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(ZSTD_32_PKG_SHORT_DESCRIPTION)\"" >> $(ZSTD_32_PKG)/.PKGINFO ; \
+ echo "url=$(ZSTD_32_PKG_URL)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
+ echo "license=$(ZSTD_32_PKG_LICENSE)" >> $(ZSTD_32_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(ZSTD_32_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 1.5.6-ppc32/PATCHES
===================================================================
--- 1.5.6-ppc32/PATCHES (nonexistent)
+++ 1.5.6-ppc32/PATCHES (revision 418)
@@ -0,0 +1,2 @@
+
+../../../sources/packages/l/zstd/patches/zstd-1.5.6-pzstd.patch -p0
Index: 1.5.6-ppc32/zstd-x32-pkg-description.in
===================================================================
--- 1.5.6-ppc32/zstd-x32-pkg-description.in (nonexistent)
+++ 1.5.6-ppc32/zstd-x32-pkg-description.in (revision 418)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+zstd-x32: zstd-x32 @VERSION@ (real-time compression algorithm)
+zstd-x32:
+zstd-x32: Zstandard, or zstd for short, is a real-time compression algorithm
+zstd-x32: providing high compression ratios. It offers a very wide range of
+zstd-x32: compression/speed trade-off, while being backed by a very fast
+zstd-x32: decoder. It also offers a special mode for small data, called
+zstd-x32: dictionary compression, and can create dictionaries from any
+zstd-x32: sample set.
+zstd-x32:
+zstd-x32: Homepage: http://zstd.net
+zstd-x32:
Index: 1.5.6-ppc32/zstd-x32-pkg-install.sh
===================================================================
--- 1.5.6-ppc32/zstd-x32-pkg-install.sh (nonexistent)
+++ 1.5.6-ppc32/zstd-x32-pkg-install.sh (revision 418)
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: 1.5.6-ppc32/zstd-x32-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 1.5.6-ppc32
===================================================================
--- 1.5.6-ppc32 (nonexistent)
+++ 1.5.6-ppc32 (revision 418)
Property changes on: 1.5.6-ppc32
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: 1.5.6-x86_32/Makefile
===================================================================
--- 1.5.6-x86_32/Makefile (nonexistent)
+++ 1.5.6-x86_32/Makefile (revision 418)
@@ -0,0 +1,152 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC64)
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+CREATE_X86_32_PACKAGE = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/l/zstd
+
+REQUIRES = libs/zstd/1.5.6
+REQUIRES += libs/lz4/1.10.0-x86_32
+REQUIRES += libs/zlib/1.3.1-x86_32
+REQUIRES += app/xz/5.6.3-x86_32
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 1.5.6
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/zstd/zstd-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/zstd-$(version)
+src_dir_name = zstd-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = libs
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+ZSTD_32_PKG_NAME = zstd-x32
+ZSTD_32_PKG_VERSION = 1.5.6
+ZSTD_32_PKG_ARCH = $(PKGARCH)
+ZSTD_32_PKG_DISTRO_NAME = $(DISTRO_NAME)
+ZSTD_32_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+ZSTD_32_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+ZSTD_32_PKG_SHORT_DESCRIPTION = real-time compression algorithm
+ZSTD_32_PKG_URL = $(BUG_URL)
+ZSTD_32_PKG_LICENSE = GPLv2
+ZSTD_32_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(ZSTD_32_PKG_NAME)-pkg-description
+ZSTD_32_PKG_DESCRIPTION_FILE_IN = $(ZSTD_32_PKG_NAME)-pkg-description.in
+ZSTD_32_PKG_INSTALL_SCRIPT = $(ZSTD_32_PKG_NAME)-pkg-install.sh
+
+ZSTD_32_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(ZSTD_32_PKG_NAME)-package
+
+pkg_basename = $(ZSTD_32_PKG_NAME)-$(ZSTD_32_PKG_VERSION)-$(ZSTD_32_PKG_ARCH)-$(ZSTD_32_PKG_DISTRO_NAME)-$(ZSTD_32_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(ZSTD_32_PKG)
+
+
+configure_switches = prefix=/usr
+configure_switches += libdir=/usr/lib$(MULTILIB_X86_32_SUFFIX)
+configure_switches += mandir=/usr/share/man
+configure_switches += bindir=/usr/bin/32
+
+
+TARGET_BIN_RPATH = /lib$(MULTILIB_X86_32_SUFFIX):/usr/lib$(MULTILIB_X86_32_SUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_BIN_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) $(configure_switches)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) $(configure_switches) -C contrib/pzstd
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(ZSTD_32_PKG)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) $(configure_switches) -j1 install $(env_sysroot)
+ @cd $(SRC_DIR) && install -Dm755 contrib/pzstd/pzstd $(ZSTD_32_PKG)/usr/bin/32/pzstd
+ifneq ($(__ENABLE_STATIC__),yes)
+ @rm -f $(ZSTD_32_PKG)/usr/lib$(MULTILIB_X86_32_SUFFIX)/*.a
+endif
+ @rm -rf $(ZSTD_32_PKG)/usr/include
+ @rm -rf $(ZSTD_32_PKG)/usr/share
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(ZSTD_32_PKG))
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(MULTILIB_X86_32_SUFFIX)/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libzstd.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(ZSTD_32_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(ZSTD_32_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ @touch $@
+
+$(ZSTD_32_PKG_DESCRIPTION_FILE): $(ZSTD_32_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(ZSTD_32_PKG_DESCRIPTION_FILE) $(ZSTD_32_PKG_INSTALL_SCRIPT)
+ @cp $(ZSTD_32_PKG_DESCRIPTION_FILE) $(ZSTD_32_PKG)/.DESCRIPTION
+ @cp $(ZSTD_32_PKG_INSTALL_SCRIPT) $(ZSTD_32_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(ZSTD_32_PKG)/.REQUIRES
+ @echo "pkgname=$(ZSTD_32_PKG_NAME)" > $(ZSTD_32_PKG)/.PKGINFO ; \
+ echo "pkgver=$(ZSTD_32_PKG_VERSION)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
+ echo "arch=$(ZSTD_32_PKG_ARCH)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
+ echo "distroname=$(ZSTD_32_PKG_DISTRO_NAME)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
+ echo "distrover=$(ZSTD_32_PKG_DISTRO_VERSION)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
+ echo "group=$(ZSTD_32_PKG_GROUP)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(ZSTD_32_PKG_SHORT_DESCRIPTION)\"" >> $(ZSTD_32_PKG)/.PKGINFO ; \
+ echo "url=$(ZSTD_32_PKG_URL)" >> $(ZSTD_32_PKG)/.PKGINFO ; \
+ echo "license=$(ZSTD_32_PKG_LICENSE)" >> $(ZSTD_32_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(ZSTD_32_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: 1.5.6-x86_32/PATCHES
===================================================================
--- 1.5.6-x86_32/PATCHES (nonexistent)
+++ 1.5.6-x86_32/PATCHES (revision 418)
@@ -0,0 +1,2 @@
+
+../../../sources/packages/l/zstd/patches/zstd-1.5.6-pzstd.patch -p0
Index: 1.5.6-x86_32/zstd-x32-pkg-description.in
===================================================================
--- 1.5.6-x86_32/zstd-x32-pkg-description.in (nonexistent)
+++ 1.5.6-x86_32/zstd-x32-pkg-description.in (revision 418)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+zstd-x32: zstd-x32 @VERSION@ (real-time compression algorithm)
+zstd-x32:
+zstd-x32: Zstandard, or zstd for short, is a real-time compression algorithm
+zstd-x32: providing high compression ratios. It offers a very wide range of
+zstd-x32: compression/speed trade-off, while being backed by a very fast
+zstd-x32: decoder. It also offers a special mode for small data, called
+zstd-x32: dictionary compression, and can create dictionaries from any
+zstd-x32: sample set.
+zstd-x32:
+zstd-x32: Homepage: http://zstd.net
+zstd-x32:
Index: 1.5.6-x86_32/zstd-x32-pkg-install.sh
===================================================================
--- 1.5.6-x86_32/zstd-x32-pkg-install.sh (nonexistent)
+++ 1.5.6-x86_32/zstd-x32-pkg-install.sh (revision 418)
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: 1.5.6-x86_32/zstd-x32-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 1.5.6-x86_32
===================================================================
--- 1.5.6-x86_32 (nonexistent)
+++ 1.5.6-x86_32 (revision 418)
Property changes on: 1.5.6-x86_32
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Radix cross Linux
The main Radix cross Linux repository contains the build scripts of packages, which have the most complete and common functionality for desktop machines
452 Commits
2 Branches
1 Tag