Radix cross Linux

Index: openocd_ft2232.cfg
===================================================================
--- openocd_ft2232.cfg	(nonexistent)
+++ openocd_ft2232.cfg	(revision 411)
@@ -0,0 +1,38 @@
+adapter_khz     1000
+
+interface ftdi
+#ftdi_device_desc "Dual RS232-HS"
+ftdi_vid_pid 0x0403 0x6010
+
+#autoexit true
+
+#interface cmsis-dap
+transport select jtag
+ftdi_layout_init 0x0008 0x001b
+ftdi_layout_signal nSRST -oe 0x0020 -data 0x0020
+
+#Reset Stretcher logic on FE310 is ~1 second long
+#This doesn't apply if you use
+# ftdi_set_signal, but still good to document
+#adapter_nsrst_delay 1500
+
+set _CHIPNAME riscv
+jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x1e200a6d
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME riscv -chain-position $_TARGETNAME
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 10000 -work-area-backup 1
+
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME gd32vf103 0x08000000 0 0 0 $_TARGETNAME
+
+#riscv expose_csrs 3040-3071
+init
+#reset
+#if {[ info exists pulse_srst]} {
+#  ftdi_set_signal nSRST 0
+#  ftdi_set_signal nSRST z
+#}
+halt
+# We must turn on this because otherwise the IDE version debug cannot download the program into flash
+#flash protect 0 0 last off