/**
******************************************************************************
* @file stm3210c_eval.h
* @author MCD Application Team
* @version V4.5.0
* @date 07-March-2011
* @brief This file contains definitions for STM3210C_EVAL's Leds, push-buttons
* COM ports, SD Card on SPI and sEE on I2C hardware resources.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>© COPYRIGHT 210 STMicroelectronics</center></h2>
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM3210C_EVAL_H
#define __STM3210C_EVAL_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32_eval.h"
/** @addtogroup Utilities
* @{
*/
/** @addtogroup STM32_EVAL
* @{
*/
/** @addtogroup STM3210C_EVAL
* @{
*/
/** @addtogroup STM3210C_EVAL_LOW_LEVEL
* @{
*/
/** @defgroup STM3210C_EVAL_LOW_LEVEL_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup STM3210C_EVAL_LOW_LEVEL_Exported_Constants
* @{
*/
/** @addtogroup STM3210C_EVAL_LOW_LEVEL_LED
* @{
*/
#define LEDn 4
#define LED1_PIN GPIO_Pin_7
#define LED1_GPIO_PORT GPIOD
#define LED1_GPIO_CLK RCC_APB2Periph_GPIOD
#define LED2_PIN GPIO_Pin_13
#define LED2_GPIO_PORT GPIOC
#define LED2_GPIO_CLK RCC_APB2Periph_GPIOC
#define LED3_PIN GPIO_Pin_3
#define LED3_GPIO_PORT GPIOD
#define LED3_GPIO_CLK RCC_APB2Periph_GPIOD
#define LED4_PIN GPIO_Pin_4
#define LED4_GPIO_PORT GPIOD
#define LED4_GPIO_CLK RCC_APB2Periph_GPIOD
/**
* @}
*/
/** @addtogroup STM3210C_EVAL_LOW_LEVEL_BUTTON
* @{
*/
#define BUTTONn 3 /*!< Joystick pins are connected to
an IO Expander (accessible through
I2C1 interface) */
/**
* @brief Wakeup push-button
*/
#define WAKEUP_BUTTON_PIN GPIO_Pin_0
#define WAKEUP_BUTTON_GPIO_PORT GPIOA
#define WAKEUP_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOA
#define WAKEUP_BUTTON_EXTI_LINE EXTI_Line0
#define WAKEUP_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOA
#define WAKEUP_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource0
#define WAKEUP_BUTTON_EXTI_IRQn EXTI0_IRQn
/**
* @brief Tamper push-button
*/
#define TAMPER_BUTTON_PIN GPIO_Pin_13
#define TAMPER_BUTTON_GPIO_PORT GPIOC
#define TAMPER_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOC
#define TAMPER_BUTTON_EXTI_LINE EXTI_Line13
#define TAMPER_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOC
#define TAMPER_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource13
#define TAMPER_BUTTON_EXTI_IRQn EXTI15_10_IRQn
/**
* @brief Key push-button
*/
#define KEY_BUTTON_PIN GPIO_Pin_9
#define KEY_BUTTON_GPIO_PORT GPIOB
#define KEY_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOB
#define KEY_BUTTON_EXTI_LINE EXTI_Line9
#define KEY_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOB
#define KEY_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource9
#define KEY_BUTTON_EXTI_IRQn EXTI9_5_IRQn
/**
* @}
*/
/** @addtogroup STM3210C_EVAL_LOW_LEVEL_COM
* @{
*/
#define COMn 1
/**
* @brief Definition for COM port1, connected to USART2 (USART2 pins remapped on GPIOD)
*/
#define EVAL_COM1 USART2
#define EVAL_COM1_CLK RCC_APB1Periph_USART2
#define EVAL_COM1_TX_PIN GPIO_Pin_5
#define EVAL_COM1_TX_GPIO_PORT GPIOD
#define EVAL_COM1_TX_GPIO_CLK RCC_APB2Periph_GPIOD
#define EVAL_COM1_RX_PIN GPIO_Pin_6
#define EVAL_COM1_RX_GPIO_PORT GPIOD
#define EVAL_COM1_RX_GPIO_CLK RCC_APB2Periph_GPIOD
#define EVAL_COM1_IRQn USART2_IRQn
/**
* @}
*/
/** @addtogroup STM3210B_EVAL_SD_SPI
* @{
*/
/**
* @brief SD SPI Interface pins
*/
#define SD_SPI SPI3
#define SD_SPI_CLK RCC_APB1Periph_SPI3
#define SD_SPI_SCK_PIN GPIO_Pin_10 /* PC.10 */
#define SD_SPI_SCK_GPIO_PORT GPIOC /* GPIOC */
#define SD_SPI_SCK_GPIO_CLK RCC_APB2Periph_GPIOC
#define SD_SPI_MISO_PIN GPIO_Pin_11 /* PC.11 */
#define SD_SPI_MISO_GPIO_PORT GPIOC /* GPIOC */
#define SD_SPI_MISO_GPIO_CLK RCC_APB2Periph_GPIOC
#define SD_SPI_MOSI_PIN GPIO_Pin_12 /* PC.12 */
#define SD_SPI_MOSI_GPIO_PORT GPIOC /* GPIOC */
#define SD_SPI_MOSI_GPIO_CLK RCC_APB2Periph_GPIOC
#define SD_CS_PIN GPIO_Pin_4 /* PA.04 */
#define SD_CS_GPIO_PORT GPIOA /* GPIOA */
#define SD_CS_GPIO_CLK RCC_APB2Periph_GPIOA
#define SD_DETECT_PIN GPIO_Pin_0 /* PE.00 */
#define SD_DETECT_GPIO_PORT GPIOE /* GPIOE */
#define SD_DETECT_GPIO_CLK RCC_APB2Periph_GPIOE
/**
* @}
*/
/** @addtogroup STM3210C_EVAL_LOW_LEVEL_I2C_EE
* @{
*/
/**
* @brief I2C EEPROM Interface pins
*/
#define sEE_I2C I2C1
#define sEE_I2C_CLK RCC_APB1Periph_I2C1
#define sEE_I2C_SCL_PIN GPIO_Pin_6 /* PB.06 */
#define sEE_I2C_SCL_GPIO_PORT GPIOB /* GPIOB */
#define sEE_I2C_SCL_GPIO_CLK RCC_APB2Periph_GPIOB
#define sEE_I2C_SDA_PIN GPIO_Pin_7 /* PB.07 */
#define sEE_I2C_SDA_GPIO_PORT GPIOB /* GPIOB */
#define sEE_I2C_SDA_GPIO_CLK RCC_APB2Periph_GPIOB
#define sEE_M24C64_32
#define sEE_I2C_DMA DMA1
#define sEE_I2C_DMA_CHANNEL_TX DMA1_Channel6
#define sEE_I2C_DMA_CHANNEL_RX DMA1_Channel7
#define sEE_I2C_DMA_FLAG_TX_TC DMA1_IT_TC6
#define sEE_I2C_DMA_FLAG_TX_GL DMA1_IT_GL6
#define sEE_I2C_DMA_FLAG_RX_TC DMA1_IT_TC7
#define sEE_I2C_DMA_FLAG_RX_GL DMA1_IT_GL7
#define sEE_I2C_DMA_CLK RCC_AHBPeriph_DMA1
#define sEE_I2C_DR_Address ((uint32_t)0x40005410)
#define sEE_USE_DMA
#define sEE_I2C_DMA_TX_IRQn DMA1_Channel6_IRQn
#define sEE_I2C_DMA_RX_IRQn DMA1_Channel7_IRQn
#define sEE_I2C_DMA_TX_IRQHandler DMA1_Channel6_IRQHandler
#define sEE_I2C_DMA_RX_IRQHandler DMA1_Channel7_IRQHandler
#define sEE_I2C_DMA_PREPRIO 0
#define sEE_I2C_DMA_SUBPRIO 0
#define sEE_DIRECTION_TX 0
#define sEE_DIRECTION_RX 1
/* Time constant for the delay caclulation allowing to have a millisecond
incrementing counter. This value should be equal to (System Clock / 1000).
ie. if system clock = 72MHz then sEE_TIME_CONST should be 72. */
#define sEE_TIME_CONST 72
/**
* @}
*/
/**
* @}
*/
/** @defgroup STM3210C_EVAL_LOW_LEVEL_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup STM3210C_EVAL_LOW_LEVEL_Exported_Functions
* @{
*/
void STM_EVAL_LEDInit(Led_TypeDef Led);
void STM_EVAL_LEDOn(Led_TypeDef Led);
void STM_EVAL_LEDOff(Led_TypeDef Led);
void STM_EVAL_LEDToggle(Led_TypeDef Led);
void STM_EVAL_PBInit(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode);
uint32_t STM_EVAL_PBGetState(Button_TypeDef Button);
void STM_EVAL_COMInit(COM_TypeDef COM, USART_InitTypeDef* USART_InitStruct);
void SD_LowLevel_DeInit(void);
void SD_LowLevel_Init(void);
void sEE_LowLevel_DeInit(void);
void sEE_LowLevel_Init(void);
void sEE_LowLevel_DMAConfig(uint32_t pBuffer, uint32_t BufferSize, uint32_t Direction);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM3210C_EVAL_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
Radix cross Linux
The main Radix cross Linux repository contains the build scripts of packages, which have the most complete and common functionality for desktop machines
452 Commits
2 Branches
1 Tag