Index: gcc/config/arm/t-arm-elf
===================================================================
--- gcc/config/arm/t-arm-elf (nonexistent)
+++ gcc/config/arm/t-arm-elf (revision 5)
@@ -0,0 +1,135 @@
+# Copyright (C) 1998-2022 Free Software Foundation, Inc.
+#
+# This file is part of GCC.
+#
+# GCC is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3, or (at your option)
+# any later version.
+#
+# GCC is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GCC; see the file COPYING3. If not see
+# <http://www.gnu.org/licenses/>.
+
+# Build a very basic set of libraries that should cater for most cases.
+
+# Single-precision floating-point is NOT supported; we don't build a
+# suitable library for that. Use the rm-profile config in that case.
+
+# PART 1 - Useful groups of options
+
+dp_fpus := vfp vfpv2 vfpv3 vfpv3-fp16 vfpv3-d16 vfpv3-d16-fp16 \
+ neon neon-vfpv3 neon-fp16 vfpv4 neon-vfpv4 vfpv4-d16 \
+ fpv5-d16 fp-armv8 neon-fp-armv8 crypto-neon-fp-armv8 \
+ vfp3
+
+sp_fpus := vfpv3xd vfpv3xd-fp16 fpv4-sp-d16 fpv5-sp-d16
+
+v7a_fps := vfpv3 vfpv3-fp16 vfpv4 simd neon-fp16 neon-vfpv4
+v7ve_fps := vfpv3-d16 vfpv3 vfpv3-d16-fp16 vfpv3-fp16 vfpv4 neon \
+ neon-fp16 simd
+
+# Not all these permutations exist for all architecture variants, but
+# it seems to work ok.
+v8_fps := simd fp16 crypto fp16+crypto dotprod fp16fml
+
+v9_fps := simd fp16 crypto fp16+crypto dotprod fp16fml
+
+# We don't do anything special with these. Pre-v4t probably doesn't work.
+all_early_nofp := armv4 armv4t armv5t
+
+all_early_arch := armv5tej armv6 armv6j armv6k armv6z armv6kz \
+ armv6zk armv6t2 iwmmxt iwmmxt2
+
+all_v7_a_r := armv7-a armv7ve armv7-r
+
+all_v8_archs := armv8-a armv8-a+crc armv8.1-a armv8.2-a armv8.3-a armv8.4-a \
+ armv8.5-a armv8.6-a
+
+all_v9_archs := armv9-a
+
+# No floating point variants, require thumb1 softfp
+all_nofp_t := armv6-m armv6s-m armv8-m.base
+
+all_nofp_t2 := armv7-m
+
+all_sp_only := armv7e-m armv8-m.main
+
+MULTILIB_OPTIONS =
+MULTILIB_DIRNAMES =
+MULTILIB_EXCEPTIONS =
+MULTILIB_MATCHES =
+MULTILIB_REUSE =
+
+# PART 2 - multilib build rules
+
+MULTILIB_OPTIONS += marm/mthumb
+MULTILIB_DIRNAMES += arm thumb
+
+#MULTILIB_OPTIONS += mfpu=auto
+#MULTILIB_DIRNAMES += autofp
+#
+#MULTILIB_OPTIONS += march=armv5te+fp/march=armv7+fp
+#MULTILIB_DIRNAMES += v5te v7
+#
+#MULTILIB_OPTIONS += mfloat-abi=hard
+#MULTILIB_DIRNAMES += fpu
+#
+## Build a total of 4 library variants (base options plus the following):
+#MULTILIB_REQUIRED += mthumb
+#MULTILIB_REQUIRED += marm/mfpu=auto/march=armv5te+fp/mfloat-abi=hard
+#MULTILIB_REQUIRED += mthumb/mfpu=auto/march=armv7+fp/mfloat-abi=hard
+#
+## PART 3 - Match rules
+#
+## Map all supported FPUs onto mfpu=auto
+#MULTILIB_MATCHES += $(foreach FPU, $(dp_fpus), \
+# mfpu?auto=mfpu?$(FPU))
+#
+#MULTILIB_MATCHES += march?armv5te+fp=march?armv5te
+#
+#MULTILIB_MATCHES += $(foreach ARCH, $(all_early_arch), \
+# march?armv5te+fp=march?$(ARCH) \
+# march?armv5te+fp=march?$(ARCH)+fp)
+#
+#MULTILIB_MATCHES += march?armv7+fp=march?armv7
+#
+#MULTILIB_MATCHES += $(foreach FPARCH, $(v7a_fps), \
+# march?armv7+fp=march?armv7-a+$(FPARCH))
+#
+#MULTILIB_MATCHES += $(foreach FPARCH, $(v7ve_fps), \
+# march?armv7+fp=march?armv7ve+$(FPARCH))
+#
+#MULTILIB_MATCHES += $(foreach ARCH, $(all_v7_a_r), \
+# march?armv7+fp=march?$(ARCH) \
+# march?armv7+fp=march?$(ARCH)+fp)
+#
+#MULTILIB_MATCHES += $(foreach ARCH, $(all_v8_archs), \
+# march?armv7+fp=march?$(ARCH) \
+# $(foreach FPARCH, $(v8_fps), \
+# march?armv7+fp=march?$(ARCH)+$(FPARCH)))
+#
+#MULTILIB_MATCHES += $(foreach ARCH, $(all_v9_archs), \
+# march?armv7+fp=march?$(ARCH) \
+# $(foreach FPARCH, $(v9_fps), \
+# march?armv7+fp=march?$(ARCH)+$(FPARCH)))
+#
+#MULTILIB_MATCHES += $(foreach ARCH, armv7e-m armv8-m.mainline, \
+# march?armv7+fp=march?$(ARCH)+fp.dp)
+#
+## PART 4 - Reuse rules
+#
+#MULTILIB_REUSE += mthumb=mthumb/mfpu.auto
+#MULTILIB_REUSE += mthumb=mthumb/mfpu.auto/march.armv5te+fp
+#MULTILIB_REUSE += mthumb=mthumb/march.armv5te+fp
+#MULTILIB_REUSE += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=marm/march.armv5te+fp/mfloat-abi.hard
+#MULTILIB_REUSE += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=march.armv5te+fp/mfloat-abi.hard
+#MULTILIB_REUSE += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=mfpu.auto/march.armv5te+fp/mfloat-abi.hard
+#MULTILIB_REUSE += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=mthumb/march.armv7+fp/mfloat-abi.hard
+#MULTILIB_REUSE += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=mfpu.auto/march.armv7+fp/mfloat-abi.hard
+#MULTILIB_REUSE += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=march.armv7+fp/mfloat-abi.hard
Index: gcc/config/arm/t-armv6-m
===================================================================
--- gcc/config/arm/t-armv6-m (nonexistent)
+++ gcc/config/arm/t-armv6-m (revision 5)
@@ -0,0 +1,35 @@
+#
+# Build below library for ARM armv6-m architecture:
+# ------------------------------------------------
+#
+# armv6-m/ -mthumb -march=armv6-m -mcpu=coretex-m0 -mfloat-abi=soft
+#
+
+MULTILIB_OPTIONS += march=armv6s-m
+MULTILIB_DIRNAMES += armv6-m
+
+MULTILIB_OPTIONS += mfloat-abi=soft
+MULTILIB_DIRNAMES += nofp
+
+MULTILIB_REQUIRED += mthumb/mfloat-abi=soft
+
+# ARMv6s-M Base M-profile (no fp)
+MULTILIB_REQUIRED += mthumb/march=armv6s-m/mfloat-abi=soft
+
+# CPU Matches
+MULTILIB_MATCHES += march?armv6s-m=mcpu?cortex-m0
+MULTILIB_MATCHES += march?armv6s-m=mcpu?cortex-m0.small-multiply
+MULTILIB_MATCHES += march?armv6s-m=mcpu?cortex-m0plus
+MULTILIB_MATCHES += march?armv6s-m=mcpu?cortex-m0plus.small-multiply
+MULTILIB_MATCHES += march?armv6s-m=mcpu?cortex-m1
+MULTILIB_MATCHES += march?armv6s-m=mcpu?cortex-m1.small-multiply
+
+# Arch Matches
+MULTILIB_MATCHES += march?armv6s-m=march?armv6-m
+
+# Use Thumb libraries for everything:
+MULTILIB_REUSE += mthumb/march.armv6s-m/mfloat-abi.soft=marm/march.armv6s-m/mfloat-abi.soft
+
+# Use soft ABI libraries for thumb and thumb/armv7-m:
+MULTILIB_REUSE += mthumb/mfloat-abi.soft=mthumb
+MULTILIB_REUSE += mthumb/march.armv6s-m/mfloat-abi.soft=mthumb/march.armv6s-m
Index: gcc/config/arm
===================================================================
--- gcc/config/arm (nonexistent)
+++ gcc/config/arm (revision 5)
Property changes on: gcc/config/arm
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,80 ##
+
+# Target build dirs
+.noarch
+.host
+
+.arm32-newlib
+.a33xx-newlib
+.a9xx-newlib
+.h5-newlib
+.s9xx-newlib
+.rk33xx-newlib
+.m1000-newlib
+.riscv64-newlib
+.at91sam7s-newlib
+
+.a1x-glibc
+.a2x-glibc
+.a311x-glibc
+.h3-glibc
+.h5-glibc
+.imx6-glibc
+.imx6ull-glibc
+.jz47xx-glibc
+.p5600-glibc
+.m1000-glibc
+.omap543x-glibc
+.am335x-glibc
+.rk328x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.a9xx-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.a33xx-glibc
+.power8-glibc
+.power9-glibc
+.power8le-glibc
+.power9le-glibc
+.riscv64-glibc
+.i586-glibc
+.i686-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.src_requires
+.src_requires_depend
+.dist
+
+# Destinations
+dist
+
+
+# Tarballs
+*.gz
+*.bz2
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Text files
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# Object Files
+*.[ao]
+
+# backup copies
+*~
Index: gcc/config
===================================================================
--- gcc/config (nonexistent)
+++ gcc/config (revision 5)
Property changes on: gcc/config
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,80 ##
+
+# Target build dirs
+.noarch
+.host
+
+.arm32-newlib
+.a33xx-newlib
+.a9xx-newlib
+.h5-newlib
+.s9xx-newlib
+.rk33xx-newlib
+.m1000-newlib
+.riscv64-newlib
+.at91sam7s-newlib
+
+.a1x-glibc
+.a2x-glibc
+.a311x-glibc
+.h3-glibc
+.h5-glibc
+.imx6-glibc
+.imx6ull-glibc
+.jz47xx-glibc
+.p5600-glibc
+.m1000-glibc
+.omap543x-glibc
+.am335x-glibc
+.rk328x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.a9xx-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.a33xx-glibc
+.power8-glibc
+.power9-glibc
+.power8le-glibc
+.power9le-glibc
+.riscv64-glibc
+.i586-glibc
+.i686-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.src_requires
+.src_requires_depend
+.dist
+
+# Destinations
+dist
+
+
+# Tarballs
+*.gz
+*.bz2
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Text files
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# Object Files
+*.[ao]
+
+# backup copies
+*~
Index: gcc/config.gcc
===================================================================
--- gcc/config.gcc (nonexistent)
+++ gcc/config.gcc (revision 5)
@@ -0,0 +1,5945 @@
+# SPDX-License-Identifier: GPL-3.0-or-later
+# GCC target-specific configuration file.
+# Copyright (C) 1997-2022 Free Software Foundation, Inc.
+
+#This file is part of GCC.
+
+#GCC is free software; you can redistribute it and/or modify it under
+#the terms of the GNU General Public License as published by the Free
+#Software Foundation; either version 3, or (at your option) any later
+#version.
+
+#GCC is distributed in the hope that it will be useful, but WITHOUT
+#ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+#FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+#for more details.
+
+#You should have received a copy of the GNU General Public License
+#along with GCC; see the file COPYING3. If not see
+#<http://www.gnu.org/licenses/>.
+
+# This is the GCC target-specific configuration file
+# where a configuration type is mapped to different system-specific
+# definitions and files. This is invoked by the autoconf-generated
+# configure script. Putting it in a separate shell file lets us skip
+# running autoconf when modifying target-specific information.
+
+# When you change the cases in the OS or target switches, consider
+# updating ../libgcc/config.host also.
+
+# This file switches on the shell variable ${target}, and also uses the
+# following shell variables:
+#
+# with_* Various variables as set by configure.
+#
+# enable_threads Either the name, yes or no depending on whether
+# threads support was requested.
+#
+# default_use_cxa_atexit
+# The default value for the $enable___cxa_atexit
+# variable. enable___cxa_atexit needs to be set to
+# "yes" for the correct operation of C++ destructors
+# but it relies upon the presence of a non-standard C
+# library function called __cxa_atexit.
+# Since not all C libraries provide __cxa_atexit the
+# default value of $default_use_cxa_atexit is set to
+# "no" except for targets which are known to be OK.
+#
+# default_gnu_indirect_function
+# The default value for the $enable_gnu_indirect_function
+# variable. enable_gnu_indirect_function relies
+# upon the presence of a non-standard gnu ifunc support
+# in the assembler, linker and dynamic linker.
+# Since not all libraries provide the dynamic linking
+# support, the default value of
+# $default_gnu_indirect_function is set to
+# "no" except for targets which are known to be OK.
+#
+# gas_flag Either yes or no depending on whether GNU as was
+# requested.
+#
+# gnu_ld_flag Either yes or no depending on whether GNU ld was
+# requested.
+
+# This file sets the following shell variables for use by the
+# autoconf-generated configure script:
+#
+# cpu_type The name of the cpu, if different from the first
+# chunk of the canonical target name.
+#
+# tm_defines List of target macros to define for all compilations.
+#
+# tm_file A list of target macro files, if different from
+# "$cpu_type/$cpu_type.h". Usually it's constructed
+# per target in a way like this:
+# tm_file="${tm_file} dbxelf.h elfos.h ${cpu_type.h}/elf.h"
+# Note that the preferred order is:
+# - specific target header "${cpu_type}/${cpu_type.h}"
+# - generic headers like dbxelf.h elfos.h, etc.
+# - specializing target headers like ${cpu_type.h}/elf.h
+# This helps to keep OS specific stuff out of the CPU
+# defining header ${cpu_type}/${cpu_type.h}.
+#
+# It is possible to include automatically-generated
+# build-directory files by prefixing them with "./".
+# All other files should relative to $srcdir/config.
+#
+# tm_p_file Location of file with declarations for functions
+# in $out_file.
+#
+# tm_d_file A list of headers with definitions of target hook
+# macros for the D compiler.
+#
+# out_file The name of the machine description C support
+# file, if different from "$cpu_type/$cpu_type.c".
+#
+# common_out_file The name of the source file for code shared between
+# the compiler proper and the driver.
+#
+# md_file The name of the machine-description file, if
+# different from "$cpu_type/$cpu_type.md".
+#
+# tmake_file A list of machine-description-specific
+# makefile-fragments, if different from
+# "$cpu_type/t-$cpu_type".
+#
+# extra_modes The name of the file containing a list of extra
+# machine modes, if necessary and different from
+# "$cpu_type/$cpu_type-modes.def".
+#
+# extra_objs List of extra objects that should be linked into
+# the compiler proper (cc1, cc1obj, cc1plus)
+# depending on target.
+#
+# extra_gcc_objs List of extra objects that should be linked into
+# the compiler driver (gcc) depending on target.
+#
+# extra_headers List of used header files from the directory
+# config/${cpu_type}.
+#
+# user_headers_inc_next_pre
+# List of header file names of internal gcc header
+# files, which should be prefixed by an include_next.
+# user_headers_inc_next_post
+# List of header file names of internal gcc header
+# files, which should be postfixed by an include_next.
+# use_gcc_tgmath If set, add tgmath.h to the list of used header
+# files.
+#
+# use_gcc_stdint If "wrap", install a version of stdint.h that
+# wraps the system's copy for hosted compilations;
+# if "provide", provide a version of systems without
+# such a system header; otherwise "none", do not
+# provide such a header at all.
+#
+# extra_programs List of extra executables compiled for this target
+# machine, used when linking.
+#
+# extra_options List of target-dependent .opt files.
+#
+# c_target_objs List of extra target-dependent objects that be
+# linked into the C compiler only.
+#
+# cxx_target_objs List of extra target-dependent objects that be
+# linked into the C++ compiler only.
+#
+# d_target_objs List of extra target-dependent objects that be
+# linked into the D compiler only.
+#
+# fortran_target_objs List of extra target-dependent objects that be
+# linked into the fortran compiler only.
+#
+# target_gtfiles List of extra source files with type information.
+#
+# xm_defines List of macros to define when compiling for the
+# target machine.
+#
+# xm_file List of files to include when compiling for the
+# target machine.
+#
+# use_collect2 Set to yes or no, depending on whether collect2
+# will be used.
+#
+# target_cpu_default Set to override the default target model.
+#
+# gdb_needs_out_file_path
+# Set to yes if gdb needs a dir command with
+# `dirname $out_file`.
+#
+# thread_file Set to control which thread package to use.
+#
+# gas Set to yes or no depending on whether the target
+# system normally uses GNU as.
+#
+# configure_default_options
+# Set to an initializer for configure_default_options
+# in configargs.h, based on --with-cpu et cetera.
+#
+# native_system_header_dir
+# Where system header files are found for this
+# target. This defaults to /usr/include. If
+# the --with-sysroot configure option or the
+# --sysroot command line option is used this
+# will be relative to the sysroot.
+# target_type_format_char
+# The default character to be used for formatting
+# the attribute in a
+# .type symbol_name, ${t_t_f_c}<property>
+# directive.
+
+# The following variables are used in each case-construct to build up the
+# outgoing variables:
+#
+# gnu_ld Set to yes or no depending on whether the target
+# system normally uses GNU ld.
+#
+# target_has_targetcm Set to yes or no depending on whether the target
+# has its own definition of targetcm.
+#
+# target_has_targetm_common Set to yes or no depending on whether the
+# target has its own definition of targetm_common.
+#
+# target_has_targetdm Set to yes or no depending on whether the target
+# has its own definition of targetdm.
+
+out_file=
+common_out_file=
+tmake_file=
+extra_headers=
+user_headers_inc_next_pre=
+user_headers_inc_next_post=
+use_gcc_tgmath=yes
+use_gcc_stdint=none
+extra_programs=
+extra_objs=
+extra_gcc_objs=
+extra_options=
+c_target_objs=
+cxx_target_objs=
+d_target_objs=
+fortran_target_objs=
+target_has_targetcm=no
+target_has_targetm_common=yes
+target_has_targetdm=no
+tm_defines=
+xm_defines=
+# Set this to force installation and use of collect2.
+use_collect2=
+# Set this to override the default target model.
+target_cpu_default=
+# Set this if gdb needs a dir command with `dirname $out_file`
+gdb_needs_out_file_path=
+# Set this to control which thread package will be used.
+thread_file=
+# Reinitialize these from the flag values every loop pass, since some
+# configure entries modify them.
+gas="$gas_flag"
+gnu_ld="$gnu_ld_flag"
+default_use_cxa_atexit=no
+default_gnu_indirect_function=no
+target_gtfiles=
+need_64bit_isa=
+native_system_header_dir=/usr/include
+target_type_format_char='@'
+
+# Don't carry these over build->host->target. Please.
+xm_file=
+md_file=
+
+# Obsolete configurations.
+case ${target} in
+ tile*-*-* \
+ | cr16-*-* \
+ | hppa[12]*-*-hpux10* \
+ | hppa[12]*-*-hpux11* \
+ | m32c-*-rtems* \
+ )
+ if test "x$enable_obsolete" != xyes; then
+ echo "*** Configuration ${target} is obsolete." >&2
+ echo "*** Specify --enable-obsolete to build it anyway." >&2
+ echo "*** Support will be REMOVED in the next major release of GCC," >&2
+ echo "*** unless a maintainer comes forward." >&2
+ exit 1
+ fi;;
+esac
+
+# Unsupported targets list. Do not put an entry in this list unless
+# it would otherwise be caught by a more permissive pattern. The list
+# should be in alphabetical order.
+case ${target} in
+ # Avoid special cases that are not obsolete
+ arm*-*-*eabi* \
+ )
+ ;;
+ arm*-wince-pe* \
+ | arm*-*-ecos-elf \
+ | arm*-*-elf \
+ | arm*-*-linux* \
+ | arm*-*-uclinux* \
+ | cris-*-linux* \
+ | crisv32-*-* \
+ | i[34567]86-go32-* \
+ | i[34567]86-*-go32* \
+ | m32r-*-linux* \
+ | m32rle-*-linux* \
+ | m68k*-*-openbsd* \
+ | m68k-*-uclinuxoldabi* \
+ | mips64orion*-*-rtems* \
+ | pdp11-*-bsd \
+ | powerpc*-*-linux*paired* \
+ | powerpc*-*-*spe* \
+ | sparc-hal-solaris2* \
+ | spu*-*-* \
+ | thumb-*-* \
+ | *-*-freebsd[12] | *-*-freebsd[1234].* \
+ | *-*-freebsd*aout* \
+ | *-*-linux*aout* \
+ | *-*-linux*coff* \
+ | *-*-linux*libc1* \
+ | *-*-linux*oldld* \
+ | *-*-rtemsaout* \
+ | *-*-rtemscoff* \
+ | *-*-solaris2 \
+ | *-*-solaris2.[0-9] \
+ | *-*-solaris2.[0-9].* \
+ | *-*-solaris2.10* \
+ | *-*-sysv* \
+ | vax-*-vms* \
+ )
+ echo "*** Configuration ${target} not supported" 1>&2
+ exit 1
+ ;;
+esac
+
+# Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
+# updated in each machine entry. Also set default extra_headers for some
+# machines.
+tm_p_file=
+cpu_type=`echo ${target} | sed 's/-.*$//'`
+cpu_is_64bit=
+case ${target} in
+m32c*-*-*)
+ cpu_type=m32c
+ tmake_file=m32c/t-m32c
+ target_has_targetm_common=no
+ ;;
+aarch64*-*-*)
+ cpu_type=aarch64
+ extra_headers="arm_fp16.h arm_neon.h arm_bf16.h arm_acle.h arm_sve.h"
+ c_target_objs="aarch64-c.o"
+ cxx_target_objs="aarch64-c.o"
+ d_target_objs="aarch64-d.o"
+ extra_objs="aarch64-builtins.o aarch-common.o aarch64-sve-builtins.o aarch64-sve-builtins-shapes.o aarch64-sve-builtins-base.o aarch64-sve-builtins-sve2.o cortex-a57-fma-steering.o aarch64-speculation.o falkor-tag-collision-avoidance.o aarch64-bti-insert.o aarch64-cc-fusion.o"
+ target_gtfiles="\$(srcdir)/config/aarch64/aarch64-builtins.cc \$(srcdir)/config/aarch64/aarch64-sve-builtins.h \$(srcdir)/config/aarch64/aarch64-sve-builtins.cc"
+ target_has_targetm_common=yes
+ ;;
+alpha*-*-*)
+ cpu_type=alpha
+ extra_options="${extra_options} g.opt"
+ ;;
+amdgcn*)
+ cpu_type=gcn
+ use_gcc_stdint=wrap
+ ;;
+am33_2.0-*-linux*)
+ cpu_type=mn10300
+ ;;
+arc*-*-*)
+ cpu_type=arc
+ c_target_objs="arc-c.o"
+ cxx_target_objs="arc-c.o"
+ extra_options="${extra_options} arc/arc-tables.opt g.opt"
+ extra_headers="arc-simd.h"
+ ;;
+arm*-*-*)
+ cpu_type=arm
+ extra_objs="arm-builtins.o arm-mve-builtins.o aarch-common.o"
+ extra_headers="mmintrin.h arm_neon.h arm_acle.h arm_fp16.h arm_cmse.h arm_bf16.h arm_mve_types.h arm_mve.h arm_cde.h"
+ target_type_format_char='%'
+ c_target_objs="arm-c.o"
+ cxx_target_objs="arm-c.o"
+ d_target_objs="arm-d.o"
+ extra_options="${extra_options} arm/arm-tables.opt"
+ target_gtfiles="\$(srcdir)/config/arm/arm-builtins.cc \$(srcdir)/config/arm/arm-mve-builtins.h \$(srcdir)/config/arm/arm-mve-builtins.cc"
+ ;;
+avr-*-*)
+ cpu_type=avr
+ c_target_objs="avr-c.o"
+ cxx_target_objs="avr-c.o"
+ ;;
+bfin*-*)
+ cpu_type=bfin
+ ;;
+bpf-*-*)
+ cpu_type=bpf
+ ;;
+frv*) cpu_type=frv
+ extra_options="${extra_options} g.opt"
+ ;;
+ft32*) cpu_type=ft32
+ target_has_targetm_common=no
+ ;;
+moxie*) cpu_type=moxie
+ target_has_targetm_common=no
+ ;;
+fido-*-*)
+ cpu_type=m68k
+ extra_headers=math-68881.h
+ extra_options="${extra_options} m68k/m68k-tables.opt"
+ ;;
+i[34567]86-*-* | x86_64-*-*)
+ cpu_type=i386
+ c_target_objs="i386-c.o"
+ cxx_target_objs="i386-c.o"
+ d_target_objs="i386-d.o"
+ extra_objs="x86-tune-sched.o x86-tune-sched-bd.o x86-tune-sched-atom.o x86-tune-sched-core.o i386-options.o i386-builtins.o i386-expand.o i386-features.o"
+ target_gtfiles="\$(srcdir)/config/i386/i386-builtins.cc \$(srcdir)/config/i386/i386-expand.cc \$(srcdir)/config/i386/i386-options.cc"
+ extra_options="${extra_options} fused-madd.opt"
+ extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
+ pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
+ nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
+ immintrin.h x86intrin.h avxintrin.h xopintrin.h
+ ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
+ lzcntintrin.h bmiintrin.h bmi2intrin.h tbmintrin.h
+ avx2intrin.h avx512fintrin.h fmaintrin.h f16cintrin.h
+ rtmintrin.h xtestintrin.h rdseedintrin.h prfchwintrin.h
+ adxintrin.h fxsrintrin.h xsaveintrin.h xsaveoptintrin.h
+ avx512cdintrin.h avx512erintrin.h avx512pfintrin.h
+ shaintrin.h clflushoptintrin.h xsavecintrin.h
+ xsavesintrin.h avx512dqintrin.h avx512bwintrin.h
+ avx512vlintrin.h avx512vlbwintrin.h avx512vldqintrin.h
+ avx512ifmaintrin.h avx512ifmavlintrin.h avx512vbmiintrin.h
+ avx512vbmivlintrin.h avx5124fmapsintrin.h avx5124vnniwintrin.h
+ avx512vpopcntdqintrin.h clwbintrin.h mwaitxintrin.h
+ clzerointrin.h pkuintrin.h sgxintrin.h cetintrin.h
+ gfniintrin.h cet.h avx512vbmi2intrin.h
+ avx512vbmi2vlintrin.h avx512vnniintrin.h
+ avx512vnnivlintrin.h vaesintrin.h vpclmulqdqintrin.h
+ avx512vpopcntdqvlintrin.h avx512bitalgintrin.h
+ pconfigintrin.h wbnoinvdintrin.h movdirintrin.h
+ waitpkgintrin.h cldemoteintrin.h avx512bf16vlintrin.h
+ avx512bf16intrin.h enqcmdintrin.h serializeintrin.h
+ avx512vp2intersectintrin.h avx512vp2intersectvlintrin.h
+ tsxldtrkintrin.h amxtileintrin.h amxint8intrin.h
+ amxbf16intrin.h x86gprintrin.h uintrintrin.h
+ hresetintrin.h keylockerintrin.h avxvnniintrin.h
+ mwaitintrin.h avx512fp16intrin.h avx512fp16vlintrin.h"
+ ;;
+ia64-*-*)
+ extra_headers=ia64intrin.h
+ extra_options="${extra_options} g.opt fused-madd.opt"
+ ;;
+hppa*-*-*)
+ cpu_type=pa
+ ;;
+lm32*)
+ extra_options="${extra_options} g.opt"
+ ;;
+m32r*-*-*)
+ cpu_type=m32r
+ extra_options="${extra_options} g.opt"
+ ;;
+m68k-*-*)
+ extra_headers=math-68881.h
+ extra_options="${extra_options} m68k/m68k-tables.opt"
+ ;;
+microblaze*-*-*)
+ cpu_type=microblaze
+ extra_options="${extra_options} g.opt"
+ ;;
+mips*-*-*)
+ cpu_type=mips
+ d_target_objs="mips-d.o"
+ extra_headers="loongson.h loongson-mmiintrin.h msa.h"
+ extra_objs="frame-header-opt.o"
+ extra_options="${extra_options} g.opt fused-madd.opt mips/mips-tables.opt"
+ ;;
+loongarch*-*-*)
+ cpu_type=loongarch
+ extra_headers="larchintrin.h"
+ extra_objs="loongarch-c.o loongarch-builtins.o loongarch-cpu.o loongarch-opts.o loongarch-def.o"
+ extra_gcc_objs="loongarch-driver.o loongarch-cpu.o loongarch-opts.o loongarch-def.o"
+ extra_options="${extra_options} g.opt fused-madd.opt"
+ ;;
+nds32*)
+ cpu_type=nds32
+ extra_headers="nds32_intrinsic.h nds32_isr.h nds32_init.inc"
+ case ${target} in
+ nds32*-*-linux*)
+ extra_options="${extra_options} nds32/nds32-linux.opt"
+ ;;
+ nds32*-*-elf*)
+ extra_options="${extra_options} nds32/nds32-elf.opt"
+ ;;
+ *)
+ ;;
+ esac
+ extra_objs="nds32-cost.o nds32-intrinsic.o nds32-isr.o nds32-md-auxiliary.o nds32-pipelines-auxiliary.o nds32-predicates.o nds32-memory-manipulation.o nds32-fp-as-gp.o nds32-relax-opt.o nds32-utils.o"
+ ;;
+nios2-*-*)
+ cpu_type=nios2
+ extra_options="${extra_options} g.opt"
+ ;;
+nvptx-*-*)
+ cpu_type=nvptx
+ c_target_objs="nvptx-c.o"
+ cxx_target_objs="nvptx-c.o"
+ extra_options="${extra_options} nvptx/nvptx-gen.opt"
+ ;;
+or1k*-*-*)
+ cpu_type=or1k
+ ;;
+powerpc*-*-*)
+ cpu_type=rs6000
+ extra_objs="rs6000-string.o rs6000-p8swap.o rs6000-logue.o"
+ extra_objs="${extra_objs} rs6000-call.o rs6000-pcrel-opt.o"
+ extra_objs="${extra_objs} rs6000-builtins.o rs6000-builtin.o"
+ extra_headers="ppc-asm.h altivec.h htmintrin.h htmxlintrin.h"
+ extra_headers="${extra_headers} bmi2intrin.h bmiintrin.h"
+ extra_headers="${extra_headers} xmmintrin.h mm_malloc.h emmintrin.h"
+ extra_headers="${extra_headers} mmintrin.h x86intrin.h"
+ extra_headers="${extra_headers} pmmintrin.h tmmintrin.h smmintrin.h"
+ extra_headers="${extra_headers} nmmintrin.h immintrin.h x86gprintrin.h"
+ extra_headers="${extra_headers} ppu_intrinsics.h spu2vmx.h vec_types.h si2vmx.h"
+ extra_headers="${extra_headers} amo.h"
+ case x$with_cpu in
+ xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[3456789]|xpower10|xpower6x|xrs64a|xcell|xa2|xe500mc64|xe5500|xe6500)
+ cpu_is_64bit=yes
+ ;;
+ esac
+ extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
+ target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-logue.cc \$(srcdir)/config/rs6000/rs6000-call.cc"
+ target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-pcrel-opt.cc"
+ target_gtfiles="$target_gtfiles ./rs6000-builtins.h"
+ ;;
+pru-*-*)
+ cpu_type=pru
+ ;;
+riscv*)
+ cpu_type=riscv
+ extra_objs="riscv-builtins.o riscv-c.o riscv-sr.o riscv-shorten-memrefs.o"
+ d_target_objs="riscv-d.o"
+ ;;
+rs6000*-*-*)
+ extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
+ extra_objs="rs6000-string.o rs6000-p8swap.o rs6000-logue.o"
+ extra_objs="${extra_objs} rs6000-call.o rs6000-pcrel-opt.o"
+ target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-logue.cc \$(srcdir)/config/rs6000/rs6000-call.cc"
+ target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-pcrel-opt.cc"
+ ;;
+sparc*-*-*)
+ cpu_type=sparc
+ c_target_objs="sparc-c.o"
+ cxx_target_objs="sparc-c.o"
+ d_target_objs="sparc-d.o"
+ extra_headers="visintrin.h"
+ ;;
+s390*-*-*)
+ cpu_type=s390
+ d_target_objs="s390-d.o"
+ extra_options="${extra_options} fused-madd.opt"
+ extra_headers="s390intrin.h htmintrin.h htmxlintrin.h vecintrin.h"
+ ;;
+# Note the 'l'; we need to be able to match e.g. "shle" or "shl".
+sh[123456789lbe]*-*-* | sh-*-*)
+ cpu_type=sh
+ extra_options="${extra_options} fused-madd.opt"
+ extra_objs="${extra_objs} sh_treg_combine.o sh-mem.o sh_optimize_sett_clrt.o"
+ ;;
+v850*-*-*)
+ cpu_type=v850
+ ;;
+tic6x-*-*)
+ cpu_type=c6x
+ extra_headers="c6x_intrinsics.h"
+ extra_options="${extra_options} c6x/c6x-tables.opt"
+ ;;
+xtensa*-*-*)
+ extra_options="${extra_options} fused-madd.opt"
+ ;;
+tilegx*-*-*)
+ cpu_type=tilegx
+ ;;
+tilepro*-*-*)
+ cpu_type=tilepro
+ ;;
+esac
+
+tm_file=${cpu_type}/${cpu_type}.h
+tm_d_file=${cpu_type}/${cpu_type}.h
+if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
+then
+ tm_p_file=${cpu_type}/${cpu_type}-protos.h
+ tm_d_file="${tm_d_file} ${cpu_type}/${cpu_type}-protos.h"
+fi
+
+extra_modes=
+if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
+then
+ extra_modes=${cpu_type}/${cpu_type}-modes.def
+fi
+if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
+then
+ extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
+fi
+
+case ${target} in
+aarch64*-*-*)
+ tm_p_file="${tm_p_file} arm/aarch-common-protos.h"
+ case ${with_abi} in
+ "")
+ if test "x$with_multilib_list" = xilp32; then
+ tm_file="aarch64/biarchilp32.h ${tm_file}"
+ else
+ tm_file="aarch64/biarchlp64.h ${tm_file}"
+ fi
+ ;;
+ ilp32)
+ tm_file="aarch64/biarchilp32.h ${tm_file}"
+ ;;
+ lp64)
+ tm_file="aarch64/biarchlp64.h ${tm_file}"
+ ;;
+ *)
+ echo "Unknown ABI used in --with-abi=$with_abi"
+ exit 1
+ esac
+ ;;
+i[34567]86-*-*)
+ if test "x$with_abi" != x; then
+ echo "This target does not support --with-abi."
+ exit 1
+ fi
+ ;;
+x86_64-*-darwin*)
+ ;;
+x86_64-*-*)
+ case ${with_abi} in
+ "")
+ if test "x$with_multilib_list" = xmx32; then
+ tm_file="i386/biarchx32.h ${tm_file}"
+ else
+ tm_file="i386/biarch64.h ${tm_file}"
+ fi
+ ;;
+ 64 | m64)
+ tm_file="i386/biarch64.h ${tm_file}"
+ ;;
+ x32 | mx32)
+ tm_file="i386/biarchx32.h ${tm_file}"
+ ;;
+ *)
+ echo "Unknown ABI used in --with-abi=$with_abi"
+ exit 1
+ esac
+ ;;
+arm*-*-*)
+ tm_p_file="arm/arm-flags.h ${tm_p_file} arm/aarch-common-protos.h"
+ ;;
+esac
+
+# On a.out targets, we need to use collect2.
+case ${target} in
+*-*-*aout*)
+ use_collect2=yes
+ ;;
+esac
+
+# Common C libraries.
+tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3 LIBC_MUSL=4"
+
+# 32-bit x86 processors supported by --with-arch=. Each processor
+# MUST be separated by exactly one space.
+x86_archs="athlon athlon-4 athlon-fx athlon-mp athlon-tbird \
+athlon-xp k6 k6-2 k6-3 geode c3 c3-2 winchip-c6 winchip2 i386 i486 \
+i586 i686 pentium pentium-m pentium-mmx pentium2 pentium3 pentium3m \
+pentium4 pentium4m pentiumpro prescott lakemont samuel-2 nehemiah \
+c7 esther"
+
+# 64-bit x86 processors supported by --with-arch=. Each processor
+# MUST be separated by exactly one space.
+x86_64_archs="amdfam10 athlon64 athlon64-sse3 barcelona bdver1 bdver2 \
+bdver3 bdver4 znver1 znver2 znver3 btver1 btver2 k8 k8-sse3 opteron \
+opteron-sse3 nocona core2 corei7 corei7-avx core-avx-i core-avx2 atom \
+slm nehalem westmere sandybridge ivybridge haswell broadwell bonnell \
+silvermont knl knm skylake-avx512 cannonlake icelake-client icelake-server \
+skylake goldmont goldmont-plus tremont cascadelake tigerlake cooperlake \
+sapphirerapids alderlake rocketlake eden-x2 nano nano-1000 nano-2000 nano-3000 \
+nano-x2 eden-x4 nano-x4 x86-64 x86-64-v2 x86-64-v3 x86-64-v4 native"
+
+# Additional x86 processors supported by --with-cpu=. Each processor
+# MUST be separated by exactly one space.
+x86_cpus="generic intel"
+
+# Common parts for widely ported systems.
+case ${target} in
+*-*-darwin*)
+ tmake_file="t-darwin "
+ tm_file="${tm_file} darwin.h"
+ tm_d_file="${tm_d_file} tm-dwarf2.h"
+ darwin_os=`echo ${target} | sed 's/.*darwin\([0-9.]*\).*$/\1/'`
+ darwin_maj=`expr "$darwin_os" : '\([0-9]*\).*'`
+ macos_min=`expr "$darwin_os" : '[0-9]*\.\([0-9]*\).*'`
+ macos_maj=10
+ if test x"${macos_min}" = x; then
+ macos_min=0
+ fi
+ def_ld64=85.2
+ # Tools hosted on earlier versions of Darwin constrained all object
+ # alignment to be 2^15 or smaller. From Darwin11 (macOS 10.7) the
+ # alignment of non-common is allowed to be up to 2^28. Note that the
+ # larger alignment is permitted when targeting 10.6 from 10.7 so that
+ # the constraint only need be applied per host (and only if the host
+ # is Darwin).
+ case ${host} in
+ *-*-darwin[4-9]* | *-*-darwin10*)
+ tm_defines="$tm_defines L2_MAX_OFILE_ALIGNMENT=15U"
+ ;;
+ *)
+ tm_defines="$tm_defines L2_MAX_OFILE_ALIGNMENT=28U"
+ ;;
+ esac
+ case ${target} in
+ # Darwin 4 to 19 correspond to macOS 10.0 to 10.15
+ *-*-darwin[4-9]* | *-*-darwin1[0-9]*)
+ macos_min=`expr $darwin_maj - 4`
+ ;;
+ *-*-darwin2*)
+ # Darwin 20 corresponds to macOS 11, Darwin 21 to macOS 12.
+ macos_maj=`expr $darwin_maj - 9`
+ def_ld64=609.0
+ ;;
+ *-*-darwin)
+ case ${cpu_type} in
+ aarch64) macos_maj=11 ;;
+ x86_64) macos_min=6 ;;
+ *) macos_min=5 ;;
+ esac
+ case ${host} in
+ *-*-darwin*) tm_defines="$tm_defines DARWIN_USE_KERNEL_VERS" ;;
+ *)
+ # If configuring a cross-compiler then we will have set some
+ # default above, but it is probably not what was intended.
+ echo "Warning: Using ${target} is only suitable for Darwin hosts" 1>&2
+ echo "configure with an explicit target version" 1>&2
+ ;;
+ esac
+ ;;
+ *)
+ echo "Error: configuring for an unreleased macOS version ${target}" 1>&2
+ exit 1
+ ;;
+ esac
+ tm_defines="$tm_defines DEF_MIN_OSX_VERSION=\\\"${macos_maj}.${macos_min}\\\""
+ tm_defines="$tm_defines DEF_LD64=\\\"${def_ld64}\\\""
+ tm_file="${tm_file} ${cpu_type}/darwin.h"
+ tm_p_file="${tm_p_file} darwin-protos.h"
+ target_gtfiles="$target_gtfiles \$(srcdir)/config/darwin.cc"
+ extra_options="${extra_options} rpath.opt darwin.opt"
+ c_target_objs="${c_target_objs} darwin-c.o"
+ cxx_target_objs="${cxx_target_objs} darwin-c.o"
+ d_target_objs="${d_target_objs} darwin-d.o"
+ fortran_target_objs="darwin-f.o"
+ target_has_targetcm=yes
+ target_has_targetdm=yes
+ extra_objs="${extra_objs} darwin.o"
+ extra_gcc_objs="darwin-driver.o"
+ default_use_cxa_atexit=yes
+ use_gcc_stdint=wrap
+ case ${enable_threads} in
+ "" | yes | posix) thread_file='posix' ;;
+ esac
+ ;;
+*-*-dragonfly*)
+ gas=yes
+ gnu_ld=yes
+ tmake_file="t-slibgcc"
+ case ${enable_threads} in
+ "" | yes | posix)
+ thread_file='posix'
+ ;;
+ no | single)
+ # Let these non-posix thread selections fall through if requested
+ ;;
+ *)
+ echo 'Unknown thread configuration for DragonFly BSD'
+ exit 1
+ ;;
+ esac
+ extra_options="$extra_options rpath.opt dragonfly.opt"
+ default_use_cxa_atexit=yes
+ use_gcc_stdint=wrap
+ d_target_objs="${d_target_objs} dragonfly-d.o"
+ tmake_file="${tmake_file} t-dragonfly"
+ target_has_targetdm=yes
+ ;;
+*-*-freebsd*)
+ # This is the generic ELF configuration of FreeBSD. Later
+ # machine-specific sections may refine and add to this
+ # configuration.
+ #
+ # Due to tm_file entry ordering issues that vary between cpu
+ # architectures, we only define fbsd_tm_file to allow the
+ # machine-specific section to dictate the final order of all
+ # entries of tm_file with the minor exception that components
+ # of the tm_file set here will always be of the form:
+ #
+ # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
+ #
+ # The machine-specific section should not tamper with this
+ # ordering but may order all other entries of tm_file as it
+ # pleases around the provided core setting.
+ gas=yes
+ gnu_ld=yes
+ fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'`
+ if test "$fbsd_major" = ""; then
+ echo "Specify the major version number of the targeted FreeBSD release"
+ echo "like this: --target=amd64-unknown-freebsd10.1"
+ exit 1
+ fi
+ tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}"
+ tmake_file="t-slibgcc"
+ case ${enable_threads} in
+ no)
+ fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
+ ;;
+ "" | yes | posix)
+ thread_file='posix'
+ ;;
+ *)
+ echo 'Unknown thread configuration for FreeBSD'
+ exit 1
+ ;;
+ esac
+ fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h"
+ extra_options="$extra_options rpath.opt freebsd.opt"
+ case ${target} in
+ *-*-freebsd[345].*)
+ :;;
+ *)
+ default_use_cxa_atexit=yes;;
+ esac
+ use_gcc_stdint=wrap
+ d_target_objs="${d_target_objs} freebsd-d.o"
+ tmake_file="${tmake_file} t-freebsd"
+ target_has_targetdm=yes
+ ;;
+*-*-fuchsia*)
+ native_system_header_dir=/include
+ ;;
+*-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu | *-*-uclinuxfdpiceabi)
+ extra_options="$extra_options gnu-user.opt"
+ gas=yes
+ gnu_ld=yes
+ case ${enable_threads} in
+ "" | yes | posix) thread_file='posix' ;;
+ esac
+ tmake_file="t-slibgcc"
+ case $target in
+ *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-kopensolaris*-gnu)
+ :;;
+ *-*-gnu*)
+ native_system_header_dir=/include
+ ;;
+ esac
+ # Linux C libraries selection switch: glibc / uclibc / bionic.
+ # uclibc and bionic aren't usable for GNU/Hurd and neither for GNU/k*BSD.
+ case $target in
+ *linux*)
+ tm_p_file="${tm_p_file} linux-protos.h"
+ tmake_file="${tmake_file} t-linux"
+ extra_objs="${extra_objs} linux.o"
+ extra_options="${extra_options} linux.opt"
+ ;;
+ esac
+ case $target in
+ *-*-*android*)
+ tm_defines="$tm_defines DEFAULT_LIBC=LIBC_BIONIC"
+ ;;
+ *-*-*uclibc* | *-*-uclinuxfdpiceabi)
+ tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
+ ;;
+ *-*-*musl*)
+ tm_defines="$tm_defines DEFAULT_LIBC=LIBC_MUSL"
+ ;;
+ *)
+ tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
+ ;;
+ esac
+ # Assume that glibc or uClibc or Bionic are being used and so __cxa_atexit
+ # is provided.
+ default_use_cxa_atexit=yes
+ use_gcc_tgmath=no
+ use_gcc_stdint=wrap
+ # Enable compilation for Android by default for *android* targets.
+ case $target in
+ *-*-*android*)
+ tm_defines="$tm_defines ANDROID_DEFAULT=1"
+ ;;
+ *)
+ tm_defines="$tm_defines ANDROID_DEFAULT=0"
+ ;;
+ esac
+ c_target_objs="${c_target_objs} glibc-c.o"
+ cxx_target_objs="${cxx_target_objs} glibc-c.o"
+ d_target_objs="${d_target_objs} glibc-d.o"
+ tmake_file="${tmake_file} t-glibc"
+ target_has_targetcm=yes
+ target_has_targetdm=yes
+ case $target in
+ *-*-*uclibc* | *-*-uclinuxfdpiceabi)
+ ;;
+ *)
+ # Linux targets always support .init_array.
+ gcc_cv_initfini_array=yes
+ ;;
+ esac
+ ;;
+*-*-netbsd*)
+ tm_p_file="${tm_p_file} netbsd-protos.h"
+ tmake_file="t-netbsd t-slibgcc"
+ extra_objs="${extra_objs} netbsd.o"
+ d_target_objs="${d_target_objs} netbsd-d.o"
+ gas=yes
+ gnu_ld=yes
+ use_gcc_stdint=wrap
+ case ${enable_threads} in
+ "" | yes | posix) thread_file='posix' ;;
+ esac
+ nbsd_tm_file="netbsd.h netbsd-stdint.h netbsd-elf.h"
+ default_use_cxa_atexit=yes
+ target_has_targetdm=yes
+ case ${target} in
+ arm*-* | i[34567]86-* | powerpc*-* | sparc*-* | x86_64-*)
+ default_gnu_indirect_function=yes
+ ;;
+ esac
+ ;;
+*-*-openbsd*)
+ tmake_file="t-openbsd"
+ case ${enable_threads} in
+ yes)
+ thread_file='posix'
+ ;;
+ esac
+ case ${target} in
+ *-*-openbsd4.[3-9]|*-*-openbsd[5-9]*)
+ default_use_cxa_atexit=yes
+ ;;
+ esac
+ d_target_objs="${d_target_objs} openbsd-d.o"
+ target_has_targetdm=yes
+ ;;
+*-*-phoenix*)
+ gas=yes
+ gnu_ld=yes
+ default_use_cxa_atexit=yes
+ ;;
+*-*-rtems*)
+ case ${enable_threads} in
+ "" | yes | rtems) thread_file='rtems' ;;
+ posix) thread_file='posix' ;;
+ no) ;;
+ *)
+ echo 'Unknown thread configuration for RTEMS'
+ exit 1
+ ;;
+ esac
+ tmake_file="${tmake_file} t-rtems"
+ extra_options="${extra_options} rtems.opt"
+ default_use_cxa_atexit=yes
+ use_gcc_stdint=wrap
+ ;;
+*-*-uclinux*)
+ extra_options="$extra_options gnu-user.opt"
+ use_gcc_stdint=wrap
+ case ${enable_threads} in
+ "" | yes | posix) thread_file='posix' ;;
+ esac
+ tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC SINGLE_LIBC"
+ ;;
+*-*-rdos*)
+ use_gcc_stdint=wrap
+ ;;
+*-*-solaris2*)
+ # i?86-*-solaris2* needs to insert headers between cpu default and
+ # Solaris 2 specific ones.
+ sol2_tm_file_head="dbxelf.h elfos.h ${cpu_type}/sysv4.h"
+ sol2_tm_file_tail="${cpu_type}/sol2.h sol2.h"
+ sol2_tm_file="${sol2_tm_file_head} ${sol2_tm_file_tail}"
+ case ${target} in
+ *-*-solaris2.1[1-9]*)
+ # __cxa_atexit was introduced in Solaris 11.4.
+ default_use_cxa_atexit=yes
+ ;;
+ esac
+ use_gcc_stdint=wrap
+ if test x$gnu_ld = xyes; then
+ tm_file="usegld.h ${tm_file}"
+ fi
+ if test x$gas = xyes; then
+ tm_file="usegas.h ${tm_file}"
+ fi
+ tm_p_file="${tm_p_file} sol2-protos.h"
+ tmake_file="${tmake_file} t-sol2 t-slibgcc"
+ c_target_objs="${c_target_objs} sol2-c.o"
+ cxx_target_objs="${cxx_target_objs} sol2-c.o sol2-cxx.o"
+ d_target_objs="${d_target_objs} sol2-d.o"
+ extra_objs="${extra_objs} sol2.o sol2-stubs.o"
+ extra_options="${extra_options} sol2.opt"
+ case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
+ "":yes:* | yes:yes:* )
+ thread_file=posix
+ ;;
+ esac
+ target_has_targetdm=yes
+ ;;
+*-*-*vms*)
+ extra_options="${extra_options} vms/vms.opt"
+ xmake_file=vms/x-vms
+ tmake_file="vms/t-vms t-slibgcc"
+ extra_objs="vms.o"
+ target_gtfiles="$target_gtfiles \$(srcdir)/config/vms/vms.cc"
+ tm_p_file="${tm_p_file} vms/vms-protos.h"
+ xm_file="vms/xm-vms.h"
+ c_target_objs="vms-c.o"
+ cxx_target_objs="vms-c.o"
+ fortran_target_objs="vms-f.o"
+ use_gcc_stdint=provide
+ tm_file="${tm_file} vms/vms-stdint.h"
+ if test x$gnu_ld != xyes; then
+ # Build wrappers for native case.
+ extra_programs="ld\$(exeext) ar\$(exeext)"
+ tmake_file="$tmake_file vms/t-vmsnative"
+ fi
+ ;;
+*-*-vxworks*)
+ tmake_file=t-vxworks
+ xm_defines=POSIX
+
+ extra_options="${extra_options} vxworks.opt"
+ extra_objs="$extra_objs vxworks.o"
+
+ c_target_objs="${c_target_objs} vxworks-c.o"
+ cxx_target_objs="${cxx_target_objs} vxworks-c.o"
+ extra_headers="${extra_headers} ../vxworks/vxworks-predef.h"
+ target_has_targetcm="yes"
+
+ # This private header exposes a consistent interface for checks on
+ # the VxWorks version our runtime header files need to perform, based on
+ # what the system headers adverstise:
+
+ extra_headers="${extra_headers} ../vxworks/_vxworks-versions.h"
+
+ # Starting from VxWorks 7, the system comes with a Dinkumware
+ # environment which requires the inclusion of "yvals.h" before other
+ # system headers. We provide wrapped versions of a few headers to
+ # accomodate such constraints:
+
+ extra_headers="${extra_headers} ../vxworks/_yvals.h"
+ extra_headers="${extra_headers} ../vxworks/_yvals-wrapper.h"
+
+ extra_headers="${extra_headers} ../vxworks/math.h ../vxworks/complex.h"
+ extra_headers="${extra_headers} ../vxworks/inttypes.h ../vxworks/setjmp.h"
+
+ # We provide (a tailored version of) stdint.h
+ tm_file="${tm_file} vxworks-stdint.h"
+ use_gcc_stdint=provide
+
+ case ${enable_threads} in
+ no) ;;
+ "" | yes | vxworks) thread_file='vxworks' ;;
+ *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
+ esac
+
+ # A few common macro definitions conveying general characteristics
+ # of the configuration at hand. Note that by VxWorks 7, we mean the
+ # the SR6xx major update or beyond in vendor parlance:
+
+ case $target in
+ *-*-vxworks7*)
+ tm_defines="$tm_defines TARGET_VXWORKS7=1"
+ ;;
+ esac
+ case $target in
+ *64-*-vxworks*)
+ tm_defines="$tm_defines TARGET_VXWORKS64=1"
+ ;;
+ esac
+
+ # Then a few build configuration controls for VxWorks 7, which
+ # has specificities on top of which we aim to provide more complete
+ # C++ support:
+
+ case $target in
+ *-*-vxworks7*)
+ # VxWorks 7 always has init/fini_array support and it is simpler to
+ # just leverage this, sticking to what the system toolchain does:
+ gcc_cv_initfini_array=yes
+ ;;
+ esac
+ ;;
+*-*-elf|arc*-*-elf*)
+ # Assume that newlib is being used and so __cxa_atexit is provided.
+ default_use_cxa_atexit=yes
+ use_gcc_stdint=wrap
+ ;;
+esac
+
+case ${target} in
+aarch64*-*-elf | aarch64*-*-fuchsia* | aarch64*-*-rtems*)
+ tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h"
+ tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-elf-raw.h"
+ tmake_file="${tmake_file} aarch64/t-aarch64"
+ case $target in
+ aarch64-*-elf*)
+ use_gcc_stdint=wrap
+ ;;
+ aarch64-*-fuchsia*)
+ tm_file="${tm_file} fuchsia.h"
+ ;;
+ aarch64-*-rtems*)
+ tm_file="${tm_file} aarch64/rtems.h rtems.h"
+ ;;
+ esac
+ case $target in
+ aarch64_be-*)
+ tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
+ ;;
+ esac
+ aarch64_multilibs="${with_multilib_list}"
+ if test "$aarch64_multilibs" = "default"; then
+ aarch64_multilibs="lp64,ilp32"
+ fi
+ aarch64_multilibs=`echo $aarch64_multilibs | sed -e 's/,/ /g'`
+ for aarch64_multilib in ${aarch64_multilibs}; do
+ case ${aarch64_multilib} in
+ ilp32 | lp64 )
+ TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${aarch64_multilib}"
+ ;;
+ *)
+ echo "--with-multilib-list=${aarch64_multilib} not supported."
+ exit 1
+ esac
+ done
+ TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
+ ;;
+aarch64*-*-freebsd*)
+ tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file}"
+ tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-freebsd.h"
+ tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-freebsd"
+ tm_defines="${tm_defines} TARGET_DEFAULT_ASYNC_UNWIND_TABLES=1"
+ ;;
+aarch64*-*-netbsd*)
+ tm_file="${tm_file} dbxelf.h elfos.h ${nbsd_tm_file}"
+ tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-netbsd.h"
+ tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-netbsd"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
+ ;;
+aarch64*-*-linux*)
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h"
+ tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-linux.h"
+ tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-linux"
+ tm_defines="${tm_defines} TARGET_DEFAULT_ASYNC_UNWIND_TABLES=1"
+ case $target in
+ aarch64_be-*)
+ tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
+ ;;
+ esac
+ aarch64_multilibs="${with_multilib_list}"
+ if test "$aarch64_multilibs" = "default"; then
+ # TODO: turn on ILP32 multilib build after its support is mature.
+ # aarch64_multilibs="lp64,ilp32"
+ aarch64_multilibs="lp64"
+ fi
+ aarch64_multilibs=`echo $aarch64_multilibs | sed -e 's/,/ /g'`
+ for aarch64_multilib in ${aarch64_multilibs}; do
+ case ${aarch64_multilib} in
+ ilp32 | lp64 )
+ TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${aarch64_multilib}"
+ ;;
+ *)
+ echo "--with-multilib-list=${aarch64_multilib} not supported."
+ exit 1
+ esac
+ done
+ TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
+ ;;
+aarch64*-wrs-vxworks*)
+ tm_file="${tm_file} elfos.h aarch64/aarch64-elf.h"
+ tm_file="${tm_file} vx-common.h vxworks.h aarch64/aarch64-vxworks.h"
+ tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-vxworks"
+ ;;
+alpha*-*-linux*)
+ tm_file="elfos.h ${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h"
+ tmake_file="${tmake_file} alpha/t-linux alpha/t-alpha"
+ extra_options="${extra_options} alpha/elf.opt"
+ ;;
+alpha*-*-netbsd*)
+ tm_file="elfos.h ${tm_file} ${nbsd_tm_file} alpha/elf.h alpha/netbsd.h"
+ tmake_file="${tmake_file} alpha/t-alpha"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt \
+ alpha/elf.opt"
+ ;;
+alpha*-*-openbsd*)
+ tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
+ tm_file="elfos.h alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h"
+ tmake_file="${tmake_file} alpha/t-alpha"
+ extra_options="${extra_options} openbsd.opt alpha/elf.opt"
+ # default x-alpha is only appropriate for dec-osf.
+ ;;
+alpha*-dec-*vms*)
+ tm_file="${tm_file} vms/vms.h alpha/vms.h"
+ tmake_file="${tmake_file} alpha/t-vms alpha/t-alpha"
+ ;;
+arc*-*-elf*)
+ tm_file="arc/arc-arch.h dbxelf.h elfos.h newlib-stdint.h arc/elf.h ${tm_file}"
+ tmake_file="arc/t-multilib arc/t-arc"
+ extra_gcc_objs="driver-arc.o"
+ if test "x$with_cpu" != x; then
+ tm_defines="${tm_defines} TARGET_CPU_BUILD=PROCESSOR_$with_cpu"
+ fi
+ if test x${with_endian} = x; then
+ case ${target} in
+ arc*be-*-* | arc*eb-*-*) with_endian=big ;;
+ *) with_endian=little ;;
+ esac
+ fi
+ case ${with_endian} in
+ big|little) ;;
+ *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
+ esac
+ case ${with_endian} in
+ big*) tm_file="arc/big.h ${tm_file}"
+ esac
+ ;;
+arc*-*-linux*)
+ tm_file="arc/arc-arch.h dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arc/linux.h ${tm_file}"
+ tmake_file="${tmake_file} arc/t-multilib-linux arc/t-arc"
+ extra_gcc_objs="driver-arc.o"
+ if test "x$with_cpu" != x; then
+ tm_defines="${tm_defines} TARGET_CPU_BUILD=PROCESSOR_$with_cpu"
+ fi
+ if test x${with_endian} = x; then
+ case ${target} in
+ arc*be-*-* | arc*eb-*-*) with_endian=big ;;
+ *) with_endian=little ;;
+ esac
+ fi
+ case ${with_endian} in
+ big|little) ;;
+ *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
+ esac
+ case ${with_endian} in
+ big*) tm_file="arc/big.h ${tm_file}"
+ esac
+ # Force .init_array support. The configure script cannot always
+ # automatically detect that GAS supports it, yet we require it.
+ gcc_cv_initfini_array=yes
+ ;;
+arm-wrs-vxworks7*)
+ # We only support VxWorks 7 now on ARM, post SR600. Pre SR600
+ # VxWorks 7 was transitory and major versions prior to 7 were based
+ # on long deprecated ABI, not supported at all any more regardless
+ # of VxWorks.
+ extra_options="${extra_options} arm/vxworks.opt"
+ tmake_file="${tmake_file} arm/t-arm arm/t-vxworks arm/t-bpabi"
+ tm_file="elfos.h arm/elf.h arm/bpabi.h arm/aout.h ${tm_file}"
+ tm_file="${tm_file} vx-common.h vxworks.h arm/vxworks.h"
+ target_cpu_cname="generic-armv7-a"
+ need_64bit_hwint=yes
+ ;;
+arm*-*-freebsd*) # ARM FreeBSD EABI
+ tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h"
+ case $target in
+ arm*b-*-freebsd*)
+ tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
+ ;;
+ esac
+ tmake_file="${tmake_file} arm/t-arm arm/t-bpabi"
+ tm_file="${tm_file} arm/bpabi.h arm/freebsd.h arm/aout.h arm/arm.h"
+ case $target in
+ armv6*-*-freebsd*)
+ target_cpu_cname="arm1176jzf-s"
+ if test $fbsd_major -ge 11; then
+ tm_defines="${tm_defines} TARGET_FREEBSD_ARM_HARD_FLOAT=1"
+ fi
+ ;;
+ armv7*-*-freebsd*)
+ target_cpu_cname="generic-armv7-a"
+ tm_defines="${tm_defines} TARGET_FREEBSD_ARM_HARD_FLOAT=1"
+ ;;
+ *)
+ target_cpu_cname="arm9"
+ ;;
+ esac
+ with_tls=${with_tls:-gnu}
+ ;;
+arm*-*-netbsdelf*)
+ target_cpu_cname="strongarm"
+ tmake_file="${tmake_file} arm/t-arm"
+ tm_file="dbxelf.h elfos.h ${nbsd_tm_file} arm/elf.h"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
+ case ${target} in
+ arm*eb-*) tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" ;;
+ esac
+ case ${target} in
+ arm*-*-netbsdelf-*eabi*)
+ tm_file="$tm_file arm/bpabi.h arm/netbsd-elf.h arm/netbsd-eabi.h"
+ tmake_file="$tmake_file arm/t-bpabi arm/t-netbsdeabi"
+ ;;
+ *)
+ tm_file="$tm_file arm/netbsd-elf.h"
+ tmake_file="$tmake_file arm/t-netbsd"
+ ;;
+ esac
+ tm_file="${tm_file} arm/aout.h arm/arm.h"
+ case ${target} in
+ arm*-*-netbsdelf-*eabihf*)
+ # Hard-float requires at least Arm v5te
+ target_cpu_cname="arm10e"
+ tm_defines="${tm_defines} TARGET_DEFAULT_FLOAT_ABI=ARM_FLOAT_ABI_HARD"
+ ;;
+ esac
+ case ${target} in
+ armv6*) target_cpu_cname="arm1176jzf-s";;
+ armv7*) target_cpu_cname="generic-armv7-a";;
+ esac
+ ;;
+arm*-*-linux-* | arm*-*-uclinuxfdpiceabi)
+ tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
+ extra_options="${extra_options} linux-android.opt"
+ case $target in
+ arm*b-*-linux*)
+ tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
+ ;;
+ esac
+ tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
+ tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h arm/aout.h arm/arm.h"
+ case $target in
+ arm*-*-uclinuxfdpiceabi)
+ tm_file="$tm_file arm/uclinuxfdpiceabi.h"
+ ;;
+ esac
+ # Generation of floating-point instructions requires at least ARMv5te.
+ if [ "$with_float" = "hard" -o "$with_float" = "softfp" ] ; then
+ target_cpu_cname="arm10e"
+ else
+ target_cpu_cname="arm10tdmi"
+ fi
+ # Define multilib configuration for arm-linux-androideabi.
+ case ${target} in
+ *-androideabi)
+ tmake_file="$tmake_file arm/t-linux-androideabi"
+ ;;
+ esac
+ # The EABI requires the use of __cxa_atexit.
+ default_use_cxa_atexit=yes
+ with_tls=${with_tls:-gnu}
+ ;;
+arm*-*-uclinux*eabi*) # ARM ucLinux
+ tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
+ tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf arm/t-bpabi"
+ tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h arm/aout.h arm/arm.h"
+ target_cpu_cname="arm7tdmi"
+ # The EABI requires the use of __cxa_atexit.
+ arm_multilibs="${with_extra_multilibs}"
+ if test $arm_multilibs != "default"; then
+ arm_multilibs=`echo $arm_multilibs | sed -e 's/,/ /g'`
+ for arm_multilib in ${arm_multilibs}; do
+ case ${arm_multilib} in
+ armv6-m)
+ tmake_file="${tmake_file} arm/t-armv6-m"
+ ;;
+ *)
+ echo "--with-extra-multilibs=${arm_multilib} not supported."
+ exit 1
+ esac
+ done
+ fi
+ default_use_cxa_atexit=yes
+ ;;
+arm*-*-phoenix*)
+ tm_file="elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
+ tm_file="${tm_file} newlib-stdint.h phoenix.h"
+ tm_file="${tm_file} arm/aout.h arm/arm.h"
+ tmake_file="${tmake_file} arm/t-arm arm/t-bpabi arm/t-phoenix"
+ target_cpu_cname="arm7tdmi"
+ ;;
+arm*-*-eabi* | arm*-*-symbianelf* | arm*-*-rtems* | arm*-*-fuchsia*)
+ case ${target} in
+ arm*eb-*-eabi*)
+ tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
+ esac
+ default_use_cxa_atexit=yes
+ tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
+ tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf"
+ target_cpu_cname="arm7tdmi"
+ case ${target} in
+ arm*-*-eabi*)
+ tm_file="$tm_file newlib-stdint.h"
+ tmake_file="${tmake_file} arm/t-bpabi"
+ arm_multilibs="${with_extra_multilibs}"
+ if test $arm_multilibs != "default"; then
+ arm_multilibs=`echo $arm_multilibs | sed -e 's/,/ /g'`
+ for arm_multilib in ${arm_multilibs}; do
+ case ${arm_multilib} in
+ armv6-m)
+ tmake_file="${tmake_file} arm/t-armv6-m"
+ ;;
+ *)
+ echo "--with-extra-multilibs=${arm_multilib} not supported."
+ exit 1
+ esac
+ done
+ fi
+ use_gcc_stdint=wrap
+ ;;
+ arm*-*-fuchsia*)
+ tm_file="${tm_file} fuchsia.h arm/fuchsia-elf.h glibc-stdint.h"
+ tmake_file="${tmake_file} arm/t-bpabi arm/t-fuchsia"
+ target_cpu_cname="generic-armv7-a"
+ ;;
+ arm*-*-rtems*)
+ tm_file="${tm_file} arm/rtems.h rtems.h newlib-stdint.h"
+ tmake_file="${tmake_file} arm/t-bpabi arm/t-rtems"
+ ;;
+ arm*-*-symbianelf*)
+ tm_file="${tm_file} arm/symbian.h"
+ # We do not include t-bpabi for Symbian OS because the system
+ # provides its own implementation of the BPABI functions.
+ tmake_file="${tmake_file} arm/t-symbian"
+ target_cpu_cname="arm10tdmi"
+ ;;
+ esac
+ tm_file="${tm_file} arm/aout.h arm/arm.h"
+ ;;
+avr-*-*)
+ tm_file="elfos.h avr/elf.h avr/avr-arch.h avr/avr.h avr/specs.h dbxelf.h avr/avr-stdint.h"
+ if test x${with_avrlibc} != xno; then
+ tm_file="${tm_file} ${cpu_type}/avrlibc.h"
+ tm_defines="${tm_defines} WITH_AVRLIBC"
+ fi
+ # Work out avr_double_comparison which is 2 or 3 and is used in
+ # target hook FLOAT_LIB_COMPARE_RETURNS_BOOL to determine whether
+ # DFmode comparisons return 3-state or 2-state results.
+ case y${with_double_comparison} in
+ y | ytristate)
+ avr_double_comparison=3
+ ;;
+ ybool | ylibf7)
+ avr_double_comparison=2
+ ;;
+ *)
+ echo "Error: --with-double-comparison= can only be used with: 'tristate', 'bool', 'libf7'" 1>&2
+ exit 1
+ ;;
+ esac
+ case "y${with_libf7}" in
+ yno)
+ # avr_double_comparison as set above.
+ ;;
+ ylibgcc)
+ avr_double_comparison=2
+ tm_defines="${tm_defines} WITH_LIBF7_LIBGCC"
+ ;;
+ y | yyes | ymath-symbols)
+ avr_double_comparison=2
+ tm_defines="${tm_defines} WITH_LIBF7_LIBGCC"
+ tm_defines="${tm_defines} WITH_LIBF7_MATH"
+ tm_defines="${tm_defines} WITH_LIBF7_MATH_SYMBOLS"
+ ;;
+ ymath)
+ avr_double_comparison=2
+ tm_defines="${tm_defines} WITH_LIBF7_LIBGCC"
+ tm_defines="${tm_defines} WITH_LIBF7_MATH"
+ ;;
+ *)
+ echo "Error: --with-libf7=${with_libf7} but can only be used with: 'libgcc', 'math', 'math-symbols', 'yes', 'no'" 1>&2
+ exit 1
+ ;;
+ esac
+ tm_defines="${tm_defines} WITH_DOUBLE_COMPARISON=${avr_double_comparison}"
+ case y${with_double} in
+ y32)
+ avr_double=32
+ tm_defines="${tm_defines} HAVE_DOUBLE32"
+ ;;
+ y64)
+ avr_double=64
+ tm_defines="${tm_defines} HAVE_DOUBLE64"
+ ;;
+ y64,32)
+ avr_double=64
+ avr_double_multilib=1
+ tm_defines="${tm_defines} HAVE_DOUBLE32"
+ tm_defines="${tm_defines} HAVE_DOUBLE64"
+ tm_defines="${tm_defines} HAVE_DOUBLE_MULTILIB"
+ ;;
+ y | y32,64)
+ avr_double=32
+ avr_double_multilib=1
+ tm_defines="${tm_defines} HAVE_DOUBLE32"
+ tm_defines="${tm_defines} HAVE_DOUBLE64"
+ tm_defines="${tm_defines} HAVE_DOUBLE_MULTILIB"
+ ;;
+ *)
+ echo "Error: --with-double= can only be used with: '32', '32,64', '64,32', '64'" 1>&2
+ exit 1
+ ;;
+ esac
+ case y${with_long_double} in
+ y32)
+ avr_long_double=32
+ tm_defines="${tm_defines} HAVE_LONG_DOUBLE32"
+ ;;
+ y64)
+ avr_long_double=64
+ tm_defines="${tm_defines} HAVE_LONG_DOUBLE64"
+ ;;
+ y | y64,32)
+ avr_long_double=64
+ avr_long_double_multilib=1
+ tm_defines="${tm_defines} HAVE_LONG_DOUBLE32"
+ tm_defines="${tm_defines} HAVE_LONG_DOUBLE64"
+ tm_defines="${tm_defines} HAVE_LONG_DOUBLE_MULTILIB"
+ ;;
+ y32,64)
+ avr_long_double=32
+ avr_long_double_multilib=1
+ tm_defines="${tm_defines} HAVE_LONG_DOUBLE32"
+ tm_defines="${tm_defines} HAVE_LONG_DOUBLE64"
+ tm_defines="${tm_defines} HAVE_LONG_DOUBLE_MULTILIB"
+ ;;
+ ydouble)
+ avr_long_double=${avr_double}
+ tm_defines="${tm_defines} HAVE_LONG_DOUBLE_IS_DOUBLE"
+ if test y${avr_double_multilib} = y1; then
+ tm_defines="${tm_defines} HAVE_LONG_DOUBLE32"
+ tm_defines="${tm_defines} HAVE_LONG_DOUBLE64"
+ else
+ tm_defines="${tm_defines} HAVE_LONG_DOUBLE${avr_long_double}"
+ fi
+ ;;
+ *)
+ echo "Error: --with-long_double= can only be used with: '32', '32,64', '64,32', '64', 'double'" 1>&2
+ exit 1
+ ;;
+ esac
+ if test ${avr_long_double}x${avr_long_double_multilib}y${avr_double_multilib}z = 32xy1z; then
+ if test y${with_long_double} != ydouble; then
+ echo "Error: --with-double=${with_double} requests a multilib for double, but long double is always 32 bits wide due to --with-long-double=${with_long_double}" 1>&2
+ exit 1
+ fi
+ fi
+ if test ${avr_double}x${avr_long_double_multilib}y${avr_double_multilib}z = 64x1yz; then
+ echo "Error: --with-long-double=${with_long_double} requests a multilib for long double, but double is always 64 bits wide due to --with-double=64" 1>&2
+ exit 1
+ fi
+ if test y${avr_double}${avr_long_double} = y6432; then
+ echo "Error: double default of 64 bits from --with-double=${with_double} conflicts with default of 32 bits for long double from --with-long-double=${with_long_double}" 1>&2
+ exit 1
+ fi
+ tm_defines="${tm_defines} WITH_DOUBLE${avr_double}"
+ tm_defines="${tm_defines} WITH_LONG_DOUBLE${avr_long_double}"
+ tmake_file="${tmake_file} avr/t-avr avr/t-multilib"
+ use_gcc_stdint=wrap
+ extra_gcc_objs="driver-avr.o avr-devices.o"
+ extra_objs="avr-devices.o avr-log.o"
+ ;;
+bfin*-elf*)
+ tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
+ tmake_file=bfin/t-bfin-elf
+ use_collect2=no
+ ;;
+bfin*-uclinux*)
+ tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h"
+ tmake_file=bfin/t-bfin-uclinux
+ use_collect2=no
+ ;;
+bfin*-linux-uclibc*)
+ tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
+ tmake_file="${tmake_file} bfin/t-bfin-linux"
+ use_collect2=no
+ ;;
+bfin*-rtems*)
+ tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h"
+ tmake_file="${tmake_file} bfin/t-rtems"
+ ;;
+bfin*-*)
+ tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
+ use_collect2=no
+ use_gcc_stdint=wrap
+ ;;
+bpf-*-*)
+ tm_file="elfos.h ${tm_file}"
+ tmake_file="${tmake_file} bpf/t-bpf"
+ use_collect2=no
+ extra_headers="bpf-helpers.h"
+ use_gcc_stdint=provide
+ extra_objs="coreout.o"
+ target_gtfiles="$target_gtfiles \$(srcdir)/config/bpf/coreout.cc"
+ ;;
+cr16-*-elf)
+ tm_file="elfos.h ${tm_file} newlib-stdint.h"
+ tmake_file="${tmake_file} cr16/t-cr16 "
+ use_collect2=no
+ ;;
+cris-*-elf | cris-*-none)
+ tm_file="elfos.h newlib-stdint.h ${tm_file}"
+ tmake_file="cris/t-cris cris/t-elfmulti"
+ gas=yes
+ extra_options="${extra_options} cris/elf.opt"
+ use_gcc_stdint=wrap
+ ;;
+csky-*-*)
+ if test x${with_endian} != x; then
+ case ${with_endian} in
+ big|little) ;;
+ *)
+ echo "with_endian=${with_endian} not supported."
+ exit 1
+ ;;
+ esac
+ fi
+ if test x${with_float} != x; then
+ case ${with_float} in
+ soft | hard) ;;
+ *) echo
+ "Unknown floating point type used in --with-float=$with_float"
+ exit 1
+ ;;
+ esac
+ fi
+ tm_file="csky/csky.h"
+ md_file="csky/csky.md"
+ out_file="csky/csky.cc"
+ tm_p_file="${tm_p_file} csky/csky-protos.h"
+ extra_options="${extra_options} csky/csky_tables.opt"
+
+ if test x${enable_tpf_debug} = xyes; then
+ tm_defines="${tm_defines} ENABLE_TPF_DEBUG"
+ fi
+
+ case ${target} in
+ csky-*-elf*)
+ tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} csky/csky-elf.h"
+ tmake_file="csky/t-csky csky/t-csky-elf"
+ default_use_cxa_atexit=no
+ use_gcc_stdint=wrap
+ ;;
+ csky-*-linux*)
+ tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} csky/csky-linux-elf.h"
+ tmake_file="${tmake_file} csky/t-csky csky/t-csky-linux"
+
+ case ${target} in
+ csky-*-linux-gnu*)
+ tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
+ # Force .init_array support. The configure script cannot always
+ # automatically detect that GAS supports it, yet we require it.
+ gcc_cv_initfini_array=yes
+ ;;
+ csky-*-linux-uclibc*)
+ tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
+ default_use_cxa_atexit=no
+ ;;
+ *)
+ echo "Unknown target $target"
+ exit 1
+ ;;
+ esac
+ ;;
+ *)
+ echo "Unknown target $target"
+ exit 1
+ ;;
+ esac
+ ;;
+epiphany-*-elf | epiphany-*-rtems*)
+ tm_file="dbxelf.h elfos.h ${tm_file}"
+ tmake_file="${tmake_file} epiphany/t-epiphany"
+ case ${target} in
+ epiphany-*-rtems*)
+ tm_file="${tm_file} epiphany/rtems.h rtems.h newlib-stdint.h"
+ ;;
+ *)
+ tm_file="${tm_file} newlib-stdint.h"
+ ;;
+ esac
+ extra_options="${extra_options} fused-madd.opt"
+ extra_objs="${extra_objs} mode-switch-use.o resolve-sw-modes.o"
+ tm_defines="${tm_defines} EPIPHANY_STACK_OFFSET=${with_stack_offset:-8}"
+ extra_headers="epiphany_intrinsics.h"
+ ;;
+fr30-*-elf)
+ tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
+ ;;
+frv-*-elf)
+ tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
+ tmake_file=frv/t-frv
+ ;;
+frv-*-*linux*)
+ tm_file="dbxelf.h elfos.h ${tm_file} \
+ gnu-user.h linux.h glibc-stdint.h frv/linux.h"
+ tmake_file="${tmake_file} frv/t-frv frv/t-linux"
+ ;;
+ft32-*-elf)
+ gas=yes
+ gnu_ld=yes
+ tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
+ tmake_file="${tmake_file} ft32/t-ft32"
+ ;;
+amdgcn-*-amdhsa)
+ tm_file="elfos.h gcn/gcn-hsa.h gcn/gcn.h newlib-stdint.h"
+ tmake_file="gcn/t-gcn-hsa"
+ native_system_header_dir=/include
+ extra_modes=gcn/gcn-modes.def
+ extra_objs="${extra_objs} gcn-tree.o"
+ extra_gcc_objs="driver-gcn.o"
+ case "$host" in
+ x86_64*-*-linux-gnu )
+ if test "$ac_cv_search_dlopen" != no; then
+ extra_programs="${extra_programs} gcn-run\$(exeext)"
+ fi
+ ;;
+ esac
+ if test x$enable_as_accelerator = xyes; then
+ extra_programs="${extra_programs} mkoffload\$(exeext)"
+ tm_file="${tm_file} gcn/offload.h"
+ fi
+ # Force .init_array support.
+ gcc_cv_initfini_array=yes
+ thread_file=gcn
+ ;;
+moxie-*-elf)
+ gas=yes
+ gnu_ld=yes
+ tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
+ tmake_file="${tmake_file} moxie/t-moxie"
+ ;;
+moxie-*-uclinux*)
+ gas=yes
+ gnu_ld=yes
+ tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h"
+ tmake_file="${tmake_file} moxie/t-moxie"
+ ;;
+moxie-*-rtems*)
+ tmake_file="${tmake_file} moxie/t-moxie"
+ tm_file="moxie/moxie.h dbxelf.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h"
+ ;;
+moxie-*-moxiebox*)
+ gas=yes
+ gnu_ld=yes
+ tm_file="${tm_file} dbxelf.h elfos.h moxie/moxiebox.h newlib-stdint.h"
+ tmake_file="${tmake_file} moxie/t-moxiebox"
+ ;;
+h8300-*-elf*)
+ tmake_file="h8300/t-h8300"
+ tm_file="h8300/h8300.h elfos.h newlib-stdint.h h8300/elf.h"
+ ;;
+h8300-*-linux*)
+ tmake_file="${tmake_file} h8300/t-h8300 h8300/t-linux"
+ tm_file="h8300/h8300.h elfos.h gnu-user.h linux.h glibc-stdint.h h8300/linux.h"
+ ;;
+hppa*64*-*-linux*)
+ target_cpu_default="MASK_PA_11|MASK_PA_20"
+ tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h gnu-user.h linux.h \
+ glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
+ pa/pa64-linux.h"
+ tmake_file="${tmake_file} pa/t-pa pa/t-linux"
+ d_target_objs="${d_target_objs} pa-d.o"
+ gas=yes gnu_ld=yes
+ ;;
+hppa*-*-linux*)
+ target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS|MASK_CALLER_COPIES"
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \
+ pa/pa32-regs.h pa/pa32-linux.h"
+ tmake_file="${tmake_file} pa/t-pa pa/t-linux"
+ d_target_objs="${d_target_objs} pa-d.o"
+ ;;
+hppa*-*-openbsd*)
+ target_cpu_default="MASK_PA_11"
+ tm_file="${tm_file} dbxelf.h elfos.h openbsd.h openbsd-stdint.h openbsd-libpthread.h \
+ pa/pa-openbsd.h pa/pa32-regs.h pa/pa32-openbsd.h"
+ extra_options="${extra_options} openbsd.opt"
+ tmake_file="pa/t-pa"
+ d_target_objs="${d_target_objs} pa-d.o"
+ gas=yes
+ gnu_ld=yes
+ ;;
+hppa*-*-netbsd*)
+ target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
+ tm_file="${tm_file} dbxelf.h elfos.h ${nbsd_tm_file} \
+ pa/pa-netbsd.h pa/pa32-regs.h pa/pa32-netbsd.h"
+ tmake_file="${tmake_file}"
+ tm_defines="${tm_defines} CHAR_FAST8=1 SHORT_FAST16=1"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
+ ;;
+hppa[12]*-*-hpux10*)
+ case ${target} in
+ hppa1.1-*-* | hppa2*-*-*)
+ target_cpu_default="MASK_PA_11"
+ ;;
+ esac
+ tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
+ pa/pa-hpux.h pa/pa-hpux10.h"
+ extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux10.opt"
+ case ${target} in
+ *-*-hpux10.[1-9]*)
+ tm_file="${tm_file} pa/pa-hpux1010.h"
+ extra_options="${extra_options} pa/pa-hpux1010.opt"
+ ;;
+ esac
+ use_gcc_stdint=provide
+ tm_file="${tm_file} hpux-stdint.h"
+ tmake_file="pa/t-pa t-slibgcc"
+ d_target_objs="${d_target_objs} pa-d.o"
+ case ${enable_threads} in
+ "")
+ if test x$have_pthread_h = xyes ; then
+ tmake_file="${tmake_file} pa/t-dce-thr"
+ fi
+ ;;
+ yes | dce)
+ tmake_file="${tmake_file} pa/t-dce-thr"
+ ;;
+ esac
+ use_collect2=yes
+ gas=yes
+ if test "x$with_dwarf2" != x; then
+ echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
+ dwarf2=no
+ fi
+ ;;
+hppa*64*-*-hpux11*)
+ target_cpu_default="MASK_PA_11|MASK_PA_20"
+ if test x$gnu_ld = xyes
+ then
+ target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
+ fi
+ tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
+ pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
+ pa/pa-hpux11.h"
+ case ${target} in
+ *-*-hpux11.[12]*)
+ tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
+ extra_options="${extra_options} pa/pa-hpux1111.opt"
+ ;;
+ *-*-hpux11.[3-9]*)
+ tm_file="${tm_file} pa/pa-hpux1131.h pa/pa-64.h pa/pa64-hpux.h"
+ extra_options="${extra_options} pa/pa-hpux1131.opt"
+ ;;
+ *)
+ tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
+ ;;
+ esac
+ extra_options="${extra_options} pa/pa-hpux.opt \
+ pa/pa-hpux1010.opt pa/pa64-hpux.opt hpux11.opt"
+ tmake_file="pa/t-pa t-slibgcc"
+ d_target_objs="${d_target_objs} pa-d.o"
+ case x${enable_threads} in
+ x | xyes | xposix )
+ thread_file=posix
+ ;;
+ esac
+ gas=yes
+ case ${target} in
+ *-*-hpux11.[01]*)
+ use_gcc_stdint=provide
+ tm_file="${tm_file} hpux-stdint.h"
+ ;;
+ *-*-hpux11.[23]*)
+ use_gcc_stdint=wrap
+ tm_file="${tm_file} hpux-stdint.h"
+ ;;
+ esac
+ ;;
+hppa[12]*-*-hpux11*)
+ case ${target} in
+ hppa1.1-*-* | hppa2*-*-*)
+ target_cpu_default="MASK_PA_11"
+ ;;
+ esac
+ tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
+ pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
+ extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt \
+ hpux11.opt"
+ case ${target} in
+ *-*-hpux11.[12]*)
+ tm_file="${tm_file} pa/pa-hpux1111.h"
+ extra_options="${extra_options} pa/pa-hpux1111.opt"
+ ;;
+ *-*-hpux11.[3-9]*)
+ tm_file="${tm_file} pa/pa-hpux1131.h"
+ extra_options="${extra_options} pa/pa-hpux1131.opt"
+ ;;
+ esac
+ tmake_file="pa/t-pa t-slibgcc"
+ d_target_objs="${d_target_objs} pa-d.o"
+ case x${enable_threads} in
+ x | xyes | xposix )
+ thread_file=posix
+ ;;
+ esac
+ use_collect2=yes
+ gas=yes
+ case ${target} in
+ *-*-hpux11.[01]*)
+ use_gcc_stdint=provide
+ tm_file="${tm_file} hpux-stdint.h"
+ ;;
+ *-*-hpux11.[23]*)
+ use_gcc_stdint=wrap
+ tm_file="${tm_file} hpux-stdint.h"
+ ;;
+ esac
+ if test "x$with_dwarf2" != x; then
+ echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
+ dwarf2=no
+ fi
+ ;;
+i[34567]86-*-darwin1[89]* | i[34567]86-*-darwin2*)
+ echo "Error: 32bit target is not supported after Darwin17" 1>&2
+ ;;
+i[34567]86-*-darwin*)
+ need_64bit_isa=yes
+ # Baseline choice for a machine that allows m64 support.
+ with_cpu=${with_cpu:-core2}
+ tmake_file="${tmake_file} ${cpu_type}/t-darwin32-biarch t-slibgcc"
+ tm_file="${cpu_type}/darwin32-biarch.h ${tm_file} "
+ ;;
+x86_64-*-darwin1[89]* | x86_64-*-darwin2*)
+ # Only 64b from now
+ tm_defines="${tm_defines} TARGET_64BIT_DEFAULT=(OPTION_MASK_ISA_64BIT|OPTION_MASK_ABI_64)"
+ tm_defines="${tm_defines} TARGET_BI_ARCH=0"
+ with_cpu=${with_cpu:-core2}
+ tmake_file="${tmake_file} t-slibgcc"
+ ;;
+x86_64-*-darwin*)
+ with_cpu=${with_cpu:-core2}
+ tmake_file="${tmake_file} ${cpu_type}/t-darwin64-biarch t-slibgcc"
+ tm_file="${cpu_type}/darwin64-biarch.h ${tm_file} "
+ ;;
+i[34567]86-*-elfiamcu)
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/iamcu.h"
+ ;;
+i[34567]86-*-elf*)
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
+ ;;
+x86_64-*-elf*)
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
+ ;;
+x86_64-*-rtems*)
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rtemself.h rtems.h"
+ ;;
+i[34567]86-*-rdos*)
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/rdos.h"
+ ;;
+x86_64-*-rdos*)
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rdos.h i386/rdos64.h"
+ tmake_file="i386/t-i386elf t-svr4"
+ ;;
+i[34567]86-*-dragonfly*)
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h dragonfly.h dragonfly-stdint.h i386/dragonfly.h"
+ tmake_file="${tmake_file} i386/t-crtstuff"
+ ;;
+x86_64-*-dragonfly*)
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h dragonfly.h dragonfly-stdint.h i386/x86-64.h i386/dragonfly.h"
+ tmake_file="${tmake_file} i386/t-crtstuff"
+ ;;
+i[34567]86-*-freebsd*)
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
+ ;;
+x86_64-*-freebsd*)
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
+ ;;
+i[34567]86-*-netbsdelf*)
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${nbsd_tm_file} i386/netbsd-elf.h"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
+ ;;
+x86_64-*-netbsd*)
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${nbsd_tm_file} i386/x86-64.h i386/netbsd64.h"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
+ ;;
+i[34567]86-*-openbsd*)
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
+ tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h"
+ extra_options="${extra_options} openbsd.opt"
+ gas=yes
+ gnu_ld=yes
+ ;;
+x86_64-*-openbsd*)
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
+ tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/x86-64.h i386/openbsdelf.h"
+ extra_options="${extra_options} openbsd.opt"
+ gas=yes
+ gnu_ld=yes
+ ;;
+i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
+ # Intel 80386's running GNU/*
+ # with ELF format using glibc 2
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h"
+ case ${target} in
+ i[34567]86-*-linux*)
+ tm_file="${tm_file} linux.h linux-android.h"
+ extra_options="${extra_options} linux-android.opt"
+ if test x$enable_targets = xall; then
+ tm_file="${tm_file} i386/x86-64.h i386/gnu-user-common.h i386/gnu-user64.h i386/linux-common.h i386/linux64.h"
+ tm_defines="${tm_defines} TARGET_BI_ARCH=1"
+ tmake_file="${tmake_file} i386/t-linux64"
+ x86_multilibs="${with_multilib_list}"
+ if test "$x86_multilibs" = "default"; then
+ x86_multilibs="m64,m32"
+ fi
+ x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
+ for x86_multilib in ${x86_multilibs}; do
+ case ${x86_multilib} in
+ m32 | m64 | mx32)
+ TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
+ ;;
+ *)
+ echo "--with-multilib-list=${x86_with_multilib} not supported."
+ exit 1
+ esac
+ done
+ TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
+ need_64bit_isa=yes
+ if test x$with_cpu = x; then
+ if test x$with_cpu_64 = x; then
+ with_cpu_64=generic
+ fi
+ else
+ case " $x86_cpus $x86_archs $x86_64_archs " in
+ *" $with_cpu "*)
+ ;;
+ *)
+ echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
+ echo "$x86_cpus $x86_archs $x86_64_archs " 1>&2
+ exit 1
+ ;;
+ esac
+ fi
+ else
+ tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h i386/linux-common.h i386/linux.h"
+ fi
+ ;;
+ i[34567]86-*-kfreebsd*-gnu)
+ tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h kfreebsd-gnu.h i386/kfreebsd-gnu.h"
+ ;;
+ i[34567]86-*-kopensolaris*-gnu)
+ tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h kopensolaris-gnu.h i386/kopensolaris-gnu.h"
+ ;;
+ i[34567]86-*-gnu*)
+ tm_file="$tm_file i386/gnu-user-common.h i386/gnu-user.h gnu.h i386/gnu.h"
+ ;;
+ esac
+ ;;
+x86_64-*-linux* | x86_64-*-kfreebsd*-gnu)
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h \
+ i386/x86-64.h i386/gnu-user-common.h i386/gnu-user64.h"
+ case ${target} in
+ x86_64-*-linux*)
+ tm_file="${tm_file} linux.h linux-android.h i386/linux-common.h i386/linux64.h"
+ extra_options="${extra_options} linux-android.opt"
+ ;;
+ x86_64-*-kfreebsd*-gnu)
+ tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu64.h"
+ ;;
+ esac
+ tmake_file="${tmake_file} i386/t-linux64"
+ x86_multilibs="${with_multilib_list}"
+ if test "$x86_multilibs" = "default"; then
+ case ${with_abi} in
+ x32 | mx32)
+ x86_multilibs="mx32"
+ ;;
+ *)
+ x86_multilibs="m64,m32"
+ ;;
+ esac
+ fi
+ x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
+ for x86_multilib in ${x86_multilibs}; do
+ case ${x86_multilib} in
+ m32 | m64 | mx32)
+ TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
+ ;;
+ *)
+ echo "--with-multilib-list=${x86_with_multilib} not supported."
+ exit 1
+ esac
+ done
+ TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
+ ;;
+i[34567]86-pc-msdosdjgpp*)
+ xm_file=i386/xm-djgpp.h
+ tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h i386/djgpp-stdint.h"
+ native_system_header_dir=/dev/env/DJDIR/include
+ extra_options="${extra_options} i386/djgpp.opt"
+ gnu_ld=yes
+ gas=yes
+ use_gcc_stdint=wrap
+ ;;
+i[34567]86-*-lynxos*)
+ xm_defines=POSIX
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
+ tmake_file="${tmake_file} t-lynx"
+ extra_options="${extra_options} lynx.opt"
+ thread_file=lynx
+ gnu_ld=yes
+ gas=yes
+ ;;
+i[34567]86-*-nto-qnx*)
+ tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h"
+ extra_options="${extra_options} i386/nto.opt"
+ gnu_ld=yes
+ gas=yes
+ ;;
+i[34567]86-*-rtems*)
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
+ tmake_file="${tmake_file} i386/t-rtems"
+ ;;
+i[34567]86-*-solaris2* | x86_64-*-solaris2*)
+ # Set default arch_32 to pentium4, tune_32 to generic like the other
+ # i386 targets, although config.guess defaults to i386-pc-solaris2*.
+ with_arch_32=${with_arch_32:-pentium4}
+ with_tune_32=${with_tune_32:-generic}
+ tm_file="${tm_file} i386/unix.h i386/att.h ${sol2_tm_file_head} i386/x86-64.h ${sol2_tm_file_tail}"
+ tm_defines="${tm_defines} TARGET_BI_ARCH=1"
+ tmake_file="$tmake_file i386/t-sol2"
+ need_64bit_isa=yes
+ if test x$with_cpu = x; then
+ if test x$with_cpu_64 = x; then
+ with_cpu_64=generic
+ fi
+ else
+ case " $x86_cpus $x86_archs $x86_64_archs " in
+ *" $with_cpu "*)
+ ;;
+ *)
+ echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
+ echo "$x86_cpus $x86_archs $x86_64_archs" 1>&2
+ exit 1
+ ;;
+ esac
+ fi
+ ;;
+i[4567]86-wrs-vxworks*|x86_64-wrs-vxworks7*)
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h"
+ case ${target} in
+ x86_64-*)
+ need_64bit_isa=yes
+ tm_file="${tm_file} i386/x86-64.h"
+ ;;
+ esac
+ tm_file="${tm_file} vx-common.h"
+ case ${target} in
+ *-vxworksae*)
+ tm_file="${tm_file} vxworksae.h i386/vxworks.h i386/vxworksae.h"
+ tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
+ ;;
+ *)
+ tm_file="${tm_file} vxworks.h i386/vxworks.h"
+ tmake_file="${tmake_file} i386/t-vxworks"
+ ;;
+ esac
+ ;;
+i[34567]86-*-cygwin*)
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
+ xm_file=i386/xm-cygwin.h
+ tmake_file="${tmake_file} i386/t-cygming t-slibgcc"
+ target_gtfiles="$target_gtfiles \$(srcdir)/config/i386/winnt.cc"
+ extra_options="${extra_options} i386/cygming.opt i386/cygwin.opt"
+ extra_objs="${extra_objs} winnt.o winnt-stubs.o"
+ c_target_objs="${c_target_objs} msformat-c.o"
+ cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
+ d_target_objs="${d_target_objs} winnt-d.o"
+ target_has_targetdm="yes"
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ fi
+ default_use_cxa_atexit=yes
+ use_gcc_stdint=wrap
+ ;;
+x86_64-*-cygwin*)
+ need_64bit_isa=yes
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-w64.h i386/cygwin-stdint.h"
+ xm_file=i386/xm-cygwin.h
+ tmake_file="${tmake_file} i386/t-cygming t-slibgcc i386/t-cygwin-w64"
+ target_gtfiles="$target_gtfiles \$(srcdir)/config/i386/winnt.cc"
+ extra_options="${extra_options} i386/cygming.opt i386/cygwin.opt"
+ extra_objs="${extra_objs} winnt.o winnt-stubs.o"
+ c_target_objs="${c_target_objs} msformat-c.o"
+ cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
+ d_target_objs="${d_target_objs} winnt-d.o"
+ target_has_targetdm="yes"
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ fi
+ default_use_cxa_atexit=yes
+ use_gcc_stdint=wrap
+ tm_defines="${tm_defines} TARGET_CYGWIN64=1"
+ ;;
+i[34567]86-*-mingw* | x86_64-*-mingw*)
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h"
+ xm_file=i386/xm-mingw32.h
+ c_target_objs="${c_target_objs} winnt-c.o"
+ cxx_target_objs="${cxx_target_objs} winnt-c.o"
+ d_target_objs="${d_target_objs} winnt-d.o"
+ target_has_targetcm="yes"
+ target_has_targetdm="yes"
+ case ${target} in
+ x86_64-*-* | *-w64-*)
+ need_64bit_isa=yes
+ ;;
+ *)
+ ;;
+ esac
+ if test x$enable_threads = xposix ; then
+ tm_file="${tm_file} i386/mingw-pthread.h"
+ fi
+ tm_file="${tm_file} i386/mingw32.h"
+ # This makes the logic if mingw's or the w64 feature set has to be used
+ case ${target} in
+ *-w64-*)
+ user_headers_inc_next_post="${user_headers_inc_next_post} float.h"
+ user_headers_inc_next_pre="${user_headers_inc_next_pre} stddef.h stdarg.h"
+ tm_file="${tm_file} i386/mingw-w64.h"
+ if test x$enable_targets = xall; then
+ tm_defines="${tm_defines} TARGET_BI_ARCH=1"
+ if test x$with_cpu = x; then
+ if test x$with_cpu_64 = x; then
+ with_cpu_64=generic
+ fi
+ else
+ case " $x86_cpus $x86_archs $x86_64_archs " in
+ *" $with_cpu "*)
+ ;;
+ *)
+ echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
+ echo "$x86_cpus $x86_archs $x86_64_archs" 1>&2
+ exit 1
+ ;;
+ esac
+ fi
+ fi
+ ;;
+ *)
+ ;;
+ esac
+ tm_file="${tm_file} i386/mingw-stdint.h"
+ tmake_file="${tmake_file} t-winnt i386/t-cygming t-slibgcc"
+ case ${target} in
+ x86_64-w64-*)
+ tmake_file="${tmake_file} i386/t-mingw-w64"
+ ;;
+ i[34567]86-w64-*)
+ tmake_file="${tmake_file} i386/t-mingw-w32"
+ ;;
+ esac
+ native_system_header_dir=/mingw/include
+ target_gtfiles="$target_gtfiles \$(srcdir)/config/i386/winnt.cc"
+ extra_options="${extra_options} i386/cygming.opt i386/mingw.opt"
+ case ${target} in
+ *-w64-*)
+ extra_options="${extra_options} i386/mingw-w64.opt"
+ ;;
+ *)
+ ;;
+ esac
+ extra_objs="${extra_objs} winnt.o winnt-stubs.o"
+ c_target_objs="${c_target_objs} msformat-c.o"
+ cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
+ gas=yes
+ gnu_ld=yes
+ default_use_cxa_atexit=yes
+ use_gcc_stdint=wrap
+ case ${enable_threads} in
+ "" | yes | win32)
+ thread_file='win32'
+ ;;
+ posix)
+ thread_file='posix'
+ ;;
+ esac
+ case ${target} in
+ *mingw32crt*)
+ tm_file="${tm_file} i386/crtdll.h"
+ ;;
+ *mingw32msv* | *mingw*)
+ ;;
+ esac
+ ;;
+x86_64-*-fuchsia*)
+ tmake_file="${tmake_file} i386/t-x86_64-elf"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h fuchsia.h"
+ ;;
+ia64*-*-elf*)
+ tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
+ tmake_file="ia64/t-ia64"
+ target_cpu_default="0"
+ if test x$gas = xyes
+ then
+ target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
+ fi
+ if test x$gnu_ld = xyes
+ then
+ target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
+ fi
+ ;;
+ia64*-*-freebsd*)
+ tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
+ target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
+ tmake_file="${tmake_file} ia64/t-ia64"
+ ;;
+ia64*-*-linux*)
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
+ tmake_file="${tmake_file} ia64/t-ia64 ia64/t-linux t-libunwind"
+ target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
+ ;;
+ia64*-*-hpux*)
+ tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/hpux.h"
+ tmake_file="ia64/t-ia64 ia64/t-hpux t-slibgcc"
+ target_cpu_default="MASK_GNU_AS"
+ case x$enable_threads in
+ x | xyes | xposix )
+ thread_file=posix
+ ;;
+ esac
+ use_collect2=no
+ c_target_objs="ia64-c.o"
+ cxx_target_objs="ia64-c.o"
+ extra_options="${extra_options} ia64/ilp32.opt hpux11.opt"
+ use_gcc_stdint=wrap
+ tm_file="${tm_file} hpux-stdint.h"
+ case ${target} in
+ *-*-hpux11.3*)
+ tm_file="${tm_file} ia64/hpux-unix2003.h"
+ ;;
+ esac
+ ;;
+ia64-hp-*vms*)
+ tm_file="${tm_file} elfos.h ia64/sysv4.h vms/vms.h ia64/vms.h"
+ tmake_file="${tmake_file} ia64/t-ia64"
+ target_cpu_default="0"
+ if test x$gas = xyes
+ then
+ target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
+ fi
+ extra_options="${extra_options} ia64/vms.opt"
+ ;;
+iq2000*-*-elf*)
+ tm_file="elfos.h newlib-stdint.h iq2000/iq2000.h"
+ out_file=iq2000/iq2000.cc
+ md_file=iq2000/iq2000.md
+ ;;
+lm32-*-elf*)
+ tm_file="dbxelf.h elfos.h ${tm_file} newlib-stdint.h"
+ tmake_file="${tmake_file} lm32/t-lm32"
+ ;;
+lm32-*-rtems*)
+ tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h"
+ tmake_file="${tmake_file} lm32/t-lm32"
+ tmake_file="${tmake_file} lm32/t-rtems"
+ ;;
+lm32-*-uclinux*)
+ tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h lm32/uclinux-elf.h"
+ tmake_file="${tmake_file} lm32/t-lm32"
+ ;;
+m32r-*-elf*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file}"
+ ;;
+m32rle-*-elf*)
+ tm_file="elfos.h newlib-stdint.h m32r/little.h ${tm_file}"
+ ;;
+m68k-*-elf* | fido-*-elf*)
+ case ${target} in
+ fido-*-elf*)
+ # Check that $with_cpu makes sense.
+ case $with_cpu in
+ "" | "fidoa")
+ ;;
+ *)
+ echo "Cannot accept --with-cpu=$with_cpu"
+ exit 1
+ ;;
+ esac
+ with_cpu=fidoa
+ ;;
+ *)
+ default_m68k_cpu=68020
+ default_cf_cpu=5206
+ ;;
+ esac
+ tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
+ tm_defines="${tm_defines} MOTOROLA=1"
+ tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
+ # Add multilibs for targets other than fido.
+ case ${target} in
+ fido-*-elf*)
+ ;;
+ *)
+ tmake_file="$tmake_file m68k/t-mlibs"
+ ;;
+ esac
+ ;;
+m68k*-*-netbsdelf*)
+ default_m68k_cpu=68020
+ default_cf_cpu=5475
+ tm_file="${tm_file} dbxelf.h elfos.h ${nbsd_tm_file} m68k/netbsd-elf.h"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
+ tm_defines="${tm_defines} MOTOROLA=1 CHAR_FAST8=1 SHORT_FAST16=1"
+ ;;
+m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux
+ # with uClibc, using the new GNU/Linux-style
+ # ABI.
+ default_m68k_cpu=68020
+ default_cf_cpu=5206
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
+ extra_options="${extra_options} m68k/uclinux.opt"
+ tm_defines="${tm_defines} MOTOROLA=1"
+ tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
+ ;;
+m68k-*-linux*) # Motorola m68k's running GNU/Linux
+ # with ELF format using glibc 2
+ # aka the GNU/Linux C library 6.
+ default_m68k_cpu=68020
+ default_cf_cpu=5475
+ with_arch=${with_arch:-m68k}
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
+ extra_options="${extra_options} m68k/ieee.opt"
+ tm_defines="${tm_defines} MOTOROLA=1"
+ tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
+ ;;
+m68k-*-rtems*)
+ default_m68k_cpu=68020
+ default_cf_cpu=5206
+ tmake_file="${tmake_file} m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff m68k/t-rtems m68k/t-mlibs"
+ tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
+ tm_defines="${tm_defines} MOTOROLA=1"
+ ;;
+mcore-*-elf)
+ tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
+ tmake_file=mcore/t-mcore
+ inhibit_libc=true
+ ;;
+microblaze*-linux*)
+ case $target in
+ microblazeel-*)
+ tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0"
+ ;;
+ microblaze-*)
+ tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321"
+ ;;
+ esac
+ tm_file="${tm_file} dbxelf.h gnu-user.h linux.h microblaze/linux.h"
+ tm_file="${tm_file} glibc-stdint.h"
+ c_target_objs="${c_target_objs} microblaze-c.o"
+ cxx_target_objs="${cxx_target_objs} microblaze-c.o"
+ tmake_file="${tmake_file} microblaze/t-microblaze"
+ tmake_file="${tmake_file} microblaze/t-microblaze-linux"
+ ;;
+microblaze*-*-rtems*)
+ case $target in
+ microblazeel-*)
+ tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0"
+ ;;
+ microblaze-*)
+ tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321"
+ ;;
+ esac
+ tm_file="${tm_file} dbxelf.h"
+ tm_file="${tm_file} microblaze/rtems.h rtems.h newlib-stdint.h"
+ c_target_objs="${c_target_objs} microblaze-c.o"
+ cxx_target_objs="${cxx_target_objs} microblaze-c.o"
+ tmake_file="${tmake_file} microblaze/t-microblaze"
+ tmake_file="${tmake_file} microblaze/t-rtems"
+ ;;
+microblaze*-*-elf)
+ case $target in
+ microblazeel-*)
+ tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0"
+ ;;
+ microblaze-*)
+ tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321"
+ ;;
+ esac
+ tm_file="${tm_file} dbxelf.h newlib-stdint.h"
+ c_target_objs="${c_target_objs} microblaze-c.o"
+ cxx_target_objs="${cxx_target_objs} microblaze-c.o"
+ tmake_file="${tmake_file} microblaze/t-microblaze"
+ ;;
+riscv*-*-linux*)
+ tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} riscv/linux.h"
+ case "x${enable_multilib}" in
+ xno) ;;
+ xyes) tmake_file="${tmake_file} riscv/t-linux-multilib" ;;
+ *) echo "Unknown value for enable_multilib"; exit 1
+ esac
+ tmake_file="${tmake_file} riscv/t-riscv riscv/t-linux"
+ gnu_ld=yes
+ gas=yes
+ case $target in
+ riscv32be-*|riscv64be-*)
+ tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
+ ;;
+ esac
+ # Force .init_array support. The configure script cannot always
+ # automatically detect that GAS supports it, yet we require it.
+ gcc_cv_initfini_array=yes
+ ;;
+riscv*-*-elf* | riscv*-*-rtems*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file} riscv/elf.h"
+ case ${target} in
+ *-*-rtems*)
+ tm_file="${tm_file} riscv/rtems.h rtems.h"
+ tmake_file="${tmake_file} riscv/t-rtems"
+ ;;
+ *)
+ if test "x${with_multilib_generator}" == xdefault; then
+ case "x${enable_multilib}" in
+ xno) ;;
+ xyes) tmake_file="${tmake_file} riscv/t-elf-multilib" ;;
+ *) echo "Unknown value for enable_multilib"; exit 1
+ esac
+ fi
+ esac
+ tmake_file="${tmake_file} riscv/t-riscv"
+ gnu_ld=yes
+ gas=yes
+ case $target in
+ riscv32be-*|riscv64be-*)
+ tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
+ ;;
+ esac
+ # Force .init_array support. The configure script cannot always
+ # automatically detect that GAS supports it, yet we require it.
+ gcc_cv_initfini_array=yes
+ ;;
+riscv*-*-freebsd*)
+ tm_file="${tm_file} elfos.h ${fbsd_tm_file} riscv/freebsd.h"
+ tmake_file="${tmake_file} riscv/t-riscv"
+ gnu_ld=yes
+ gas=yes
+ case $target in
+ riscv32be-*|riscv64be-*)
+ tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
+ ;;
+ esac
+ # Force .init_array support. The configure script cannot always
+ # automatically detect that GAS supports it, yet we require it.
+ gcc_cv_initfini_array=yes
+ ;;
+
+loongarch*-*-linux*)
+ tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file}"
+ tm_file="${tm_file} loongarch/gnu-user.h loongarch/linux.h"
+ extra_options="${extra_options} linux-android.opt"
+ tmake_file="${tmake_file} loongarch/t-linux"
+ gnu_ld=yes
+ gas=yes
+
+ # Force .init_array support. The configure script cannot always
+ # automatically detect that GAS supports it, yet we require it.
+ gcc_cv_initfini_array=yes
+ ;;
+
+mips*-*-netbsd*) # NetBSD/mips, either endian.
+ target_cpu_default="MASK_ABICALLS"
+ tm_file="elfos.h ${tm_file} mips/elf.h ${nbsd_tm_file} mips/netbsd.h"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
+ ;;
+mips*-img-linux*)
+ tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h"
+ extra_options="${extra_options} linux-android.opt"
+ tmake_file="${tmake_file} mips/t-img-linux"
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6 MIPS_ABI_DEFAULT=ABI_32"
+ with_arch_32="mips32r6"
+ with_arch_64="mips64r6"
+ gnu_ld=yes
+ gas=yes
+ ;;
+mips*-mti-linux*)
+ tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h"
+ extra_options="${extra_options} linux-android.opt"
+ tmake_file="${tmake_file} mips/t-mti-linux"
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2 MIPS_ABI_DEFAULT=ABI_32"
+ with_arch_32="mips32r2"
+ with_arch_64="mips64r2"
+ gnu_ld=yes
+ gas=yes
+ ;;
+mips*-*-linux*) # Linux MIPS, either endian.
+ tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h"
+ extra_options="${extra_options} linux-android.opt"
+ case ${target} in
+ mipsisa32r6*)
+ default_mips_arch=mips32r6
+ ;;
+ mipsisa32r2*)
+ default_mips_arch=mips32r2
+ ;;
+ mipsisa32*)
+ default_mips_arch=mips32
+ ;;
+ mips64el-st-linux-gnu)
+ default_mips_abi=n32
+ tm_file="${tm_file} mips/st.h"
+ tmake_file="${tmake_file} mips/t-st"
+ enable_mips_multilibs="yes"
+ ;;
+ mips64octeon*-*-linux*)
+ default_mips_abi=n32
+ tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\""
+ target_cpu_default=MASK_SOFT_FLOAT_ABI
+ enable_mips_multilibs="yes"
+ ;;
+ mipsisa64r6*-*-linux-gnuabi64)
+ default_mips_abi=64
+ default_mips_arch=mips64r6
+ enable_mips_multilibs="yes"
+ ;;
+ mipsisa64r6*-*-linux*)
+ default_mips_abi=n32
+ default_mips_arch=mips64r6
+ enable_mips_multilibs="yes"
+ ;;
+ mipsisa64r2*-*-linux-gnuabi64)
+ default_mips_abi=64
+ default_mips_arch=mips64r2
+ enable_mips_multilibs="yes"
+ ;;
+ mipsisa64r2*-*-linux*)
+ default_mips_abi=n32
+ default_mips_arch=mips64r2
+ enable_mips_multilibs="yes"
+ ;;
+ mips64*-*-linux-gnuabi64 | mipsisa64*-*-linux-gnuabi64)
+ default_mips_abi=64
+ enable_mips_multilibs="yes"
+ ;;
+ mips64*-*-linux* | mipsisa64*-*-linux*)
+ default_mips_abi=n32
+ enable_mips_multilibs="yes"
+ ;;
+ esac
+ if test x$enable_targets = xall; then
+ enable_mips_multilibs="yes"
+ fi
+ if test x$enable_mips_multilibs = xyes; then
+ tmake_file="${tmake_file} mips/t-linux64"
+ fi
+ ;;
+mips*-mti-elf*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h mips/sde.h mips/mti-elf.h"
+ tmake_file="mips/t-mti-elf"
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2 MIPS_ABI_DEFAULT=ABI_32"
+ with_arch_32="mips32r2"
+ with_arch_64="mips64r2"
+ ;;
+mips*-img-elf*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h mips/sde.h mips/mti-elf.h"
+ tmake_file="mips/t-img-elf"
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6 MIPS_ABI_DEFAULT=ABI_32"
+ with_arch_32="mips32r6"
+ with_arch_64="mips64r6"
+ ;;
+mips*-sde-elf*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h mips/sde.h"
+ tmake_file="mips/t-sde"
+ extra_options="${extra_options} mips/sde.opt"
+ case "${with_newlib}" in
+ yes)
+ # newlib / libgloss.
+ ;;
+ *)
+ # MIPS toolkit libraries.
+ tm_file="$tm_file mips/sdemtk.h"
+ tmake_file="$tmake_file mips/t-sdemtk"
+ case ${enable_threads} in
+ "" | yes | mipssde)
+ thread_file='mipssde'
+ ;;
+ esac
+ ;;
+ esac
+ case ${target} in
+ mipsisa32r6*)
+ tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6 MIPS_ABI_DEFAULT=ABI_32"
+ ;;
+ mipsisa32r2*)
+ tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2 MIPS_ABI_DEFAULT=ABI_32"
+ ;;
+ mipsisa32*)
+ tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32 MIPS_ABI_DEFAULT=ABI_32"
+ ;;
+ mipsisa64r6*)
+ tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R6 MIPS_ABI_DEFAULT=ABI_N32"
+ ;;
+ mipsisa64r2*)
+ tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R2 MIPS_ABI_DEFAULT=ABI_N32"
+ ;;
+ mipsisa64*)
+ tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64 MIPS_ABI_DEFAULT=ABI_N32"
+ ;;
+ esac
+ ;;
+mipsisa32-*-elf* | mipsisa32el-*-elf* | \
+mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
+mipsisa32r6-*-elf* | mipsisa32r6el-*-elf* | \
+mipsisa64-*-elf* | mipsisa64el-*-elf* | \
+mipsisa64r2-*-elf* | mipsisa64r2el-*-elf* | \
+mipsisa64r6-*-elf* | mipsisa64r6el-*-elf*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
+ tmake_file="mips/t-isa3264"
+ case ${target} in
+ mipsisa32r6*)
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6"
+ ;;
+ mipsisa32r2*)
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2"
+ ;;
+ mipsisa32*)
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32"
+ ;;
+ mipsisa64r6*)
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R6"
+ ;;
+ mipsisa64r2*)
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R2"
+ ;;
+ mipsisa64*)
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64"
+ ;;
+ esac
+ case ${target} in
+ mipsisa32*-*-elfoabi*)
+ tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
+ tm_file="${tm_file} mips/elfoabi.h"
+ ;;
+ mipsisa64*-*-elfoabi*)
+ tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
+ tm_file="${tm_file} mips/elfoabi.h"
+ ;;
+ *-*-elf*)
+ tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
+ ;;
+ esac
+ ;;
+mipsisa64sr71k-*-elf*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
+ tmake_file=mips/t-sr71k
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
+ ;;
+mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
+ tmake_file="mips/t-elf mips/t-sb1"
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
+ ;;
+mips-*-elf* | mipsel-*-elf* | mipsr5900-*-elf* | mipsr5900el-*-elf*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
+ tmake_file="mips/t-elf"
+ ;;
+mips64r5900-*-elf* | mips64r5900el-*-elf*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h"
+ tmake_file="mips/t-elf"
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS3 MIPS_ABI_DEFAULT=ABI_N32"
+ ;;
+mips64-*-elf* | mips64el-*-elf*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
+ tmake_file="mips/t-elf"
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS3 MIPS_ABI_DEFAULT=ABI_O64"
+ ;;
+mips64vr-*-elf* | mips64vrel-*-elf*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h"
+ tmake_file=mips/t-vr
+ tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
+ ;;
+mips64orion-*-elf* | mips64orionel-*-elf*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h"
+ tmake_file="mips/t-elf"
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS3 MIPS_ABI_DEFAULT=ABI_O64"
+ ;;
+mips*-*-rtems*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
+ tmake_file="${tmake_file} mips/t-elf mips/t-rtems"
+ ;;
+mips-wrs-vxworks)
+ tm_file="elfos.h ${tm_file} mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
+ tmake_file="${tmake_file} mips/t-vxworks"
+ ;;
+mipstx39-*-elf* | mipstx39el-*-elf*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h"
+ tmake_file="mips/t-r3900"
+ ;;
+mmix-knuth-mmixware)
+ tm_file="${tm_file} newlib-stdint.h"
+ use_gcc_stdint=wrap
+ ;;
+mn10300-*-*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file}"
+ use_collect2=no
+ use_gcc_stdint=wrap
+ ;;
+msp430-*-*)
+ tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
+ c_target_objs="msp430-c.o"
+ cxx_target_objs="msp430-c.o"
+ tmake_file="${tmake_file} msp430/t-msp430"
+ extra_objs="${extra_objs} msp430-devices.o"
+ extra_gcc_objs="driver-msp430.o msp430-devices.o"
+ # Enable .init_array unless it has been explicitly disabled.
+ # The MSP430 EABI mandates the use of .init_array, and the Newlib CRT
+ # code since mid-2019 expects it.
+ if test x${disable_initfini_array} != xyes; then
+ gcc_cv_initfini_array=yes
+ fi
+ case ${target} in
+ msp430-*-elfbare)
+ # __cxa_atexit increases code size, and we don't need to support
+ # dynamic shared objects on MSP430, so regular Newlib atexit is a
+ # fine replacement as it also supports registration of more than 32
+ # functions.
+ default_use_cxa_atexit=no
+ # This target does not match the generic *-*-elf case above which
+ # sets use_gcc_stdint=wrap, so explicitly set it here.
+ use_gcc_stdint=wrap
+ ;;
+ esac
+ ;;
+nds32*-*-*)
+ target_cpu_default="0"
+ tm_defines="${tm_defines}"
+ case ${target} in
+ nds32le*-*-*)
+ ;;
+ nds32be-*-*)
+ target_cpu_default="${target_cpu_default}|MASK_BIG_ENDIAN"
+ tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
+ ;;
+ esac
+ case ${target} in
+ nds32*-*-elf*)
+ tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} nds32/elf.h nds32/nds32_intrinsic.h"
+ tmake_file="nds32/t-nds32 nds32/t-elf"
+ ;;
+ nds32*-*-linux*)
+ tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h nds32/linux.h nds32/nds32_intrinsic.h"
+ tmake_file="${tmake_file} nds32/t-nds32 nds32/t-linux"
+ gcc_cv_initfini_array=yes
+ ;;
+ esac
+
+ # Handle --enable-default-relax setting.
+ if test x${enable_default_relax} = xyes; then
+ tm_defines="${tm_defines} TARGET_DEFAULT_RELAX=1"
+ fi
+ # Handle --with-ext-dsp
+ if test x${with_ext_dsp} = xyes; then
+ tm_defines="${tm_defines} TARGET_DEFAULT_EXT_DSP=1"
+ fi
+ ;;
+nios2-*-*)
+ tm_file="elfos.h ${tm_file}"
+ tmake_file="${tmake_file} nios2/t-nios2"
+ case ${target} in
+ nios2-*-linux*)
+ tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h nios2/linux.h "
+ ;;
+ nios2-*-elf*)
+ tm_file="${tm_file} newlib-stdint.h nios2/elf.h"
+ extra_options="${extra_options} nios2/elf.opt"
+ ;;
+ nios2-*-rtems*)
+ tm_file="${tm_file} newlib-stdint.h nios2/rtems.h rtems.h"
+ tmake_file="${tmake_file} t-rtems nios2/t-rtems"
+ ;;
+ esac
+ ;;
+nvptx-*)
+ tm_file="${tm_file} newlib-stdint.h"
+ use_gcc_stdint=wrap
+ tmake_file="nvptx/t-nvptx"
+ if test x$enable_as_accelerator = xyes; then
+ extra_programs="${extra_programs} mkoffload\$(exeext)"
+ tm_file="${tm_file} nvptx/offload.h"
+ fi
+ ;;
+or1k*-*-*)
+ tm_file="elfos.h ${tm_file}"
+ tmake_file="${tmake_file} or1k/t-or1k"
+ # Force .init_array support. The configure script cannot always
+ # automatically detect that GAS supports it, yet we require it.
+ gcc_cv_initfini_array=yes
+
+ # Handle --with-multilib-list=...
+ or1k_multilibs="${with_multilib_list}"
+ if test "$or1k_multilibs" = "default"; then
+ or1k_multilibs="mcmov,msoft-mul,msoft-div"
+ fi
+ or1k_multilibs=`echo $or1k_multilibs | sed -e 's/,/ /g'`
+ for or1k_multilib in ${or1k_multilibs}; do
+ case ${or1k_multilib} in
+ mcmov | msext | msfimm | \
+ mror | mrori | \
+ mhard-float | mdouble-float | munordered-float | msoft-float | \
+ mhard-div | mhard-mul | \
+ msoft-div | msoft-mul )
+ TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${or1k_multilib}"
+ ;;
+ *)
+ echo "--with-multilib-list=${with_multilib_list} not supported."
+ exit 1
+ esac
+ done
+ TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
+
+ case ${target} in
+ or1k*-*-linux*)
+ tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h"
+ tm_file="${tm_file} or1k/linux.h"
+ ;;
+ or1k*-*-elf*)
+ tm_file="${tm_file} newlib-stdint.h or1k/elf.h"
+ extra_options="${extra_options} or1k/elf.opt"
+ ;;
+ or1k*-*-rtems*)
+ tm_file="${tm_file} newlib-stdint.h or1k/rtems.h rtems.h"
+ tmake_file="${tmake_file} or1k/t-rtems"
+ ;;
+ esac
+ ;;
+pdp11-*-*)
+ tm_file="${tm_file} newlib-stdint.h"
+ use_gcc_stdint=wrap
+ ;;
+# port not yet contributed
+#powerpc-*-openbsd*)
+# tmake_file="${tmake_file} rs6000/t-fprules"
+# extra_headers=
+# ;;
+powerpc-*-darwin*)
+ extra_options="${extra_options} ${cpu_type}/darwin.opt"
+ case ${target} in
+ *-darwin1[0-9]* | *-darwin9*)
+ tmake_file="${tmake_file} ${cpu_type}/t-darwin32-biarch"
+ tm_file="${tm_file} ${cpu_type}/darwin32-biarch.h"
+ ;;
+ *-darwin8*)
+ tmake_file="${tmake_file} ${cpu_type}/t-darwin32-biarch"
+ tm_file="${tm_file} ${cpu_type}/darwin32-biarch.h"
+ ;;
+ *-darwin7*)
+ tm_file="${tm_file} ${cpu_type}/darwin7.h"
+ ;;
+ *-darwin[456]*)
+ # Earlier - ingle arch, with 32b only
+ # OS X 10.0, the first edition is Darwin4
+ ;;
+ esac
+ tmake_file="${tmake_file} t-slibgcc"
+ ;;
+powerpc64-*-darwin*)
+ extra_options="${extra_options} ${cpu_type}/darwin.opt"
+ tmake_file="${tmake_file} ${cpu_type}/t-darwin64-biarch t-slibgcc"
+ tm_file="${tm_file} ${cpu_type}/darwin64-biarch.h"
+ ;;
+powerpc*-*-freebsd*)
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h ${fbsd_tm_file} rs6000/sysv4.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
+ case ${target} in
+ powerpc*le-*-*)
+ tm_file="${tm_file} rs6000/sysv4le.h" ;;
+ esac
+ case ${target} in
+ powerpc64*)
+ tm_file="${tm_file} rs6000/default64.h rs6000/freebsd64.h"
+ tmake_file="${tmake_file} rs6000/t-freebsd64"
+ extra_options="${extra_options} rs6000/linux64.opt"
+ if test $fbsd_major -ge 13; then
+ tm_defines="${tm_defines} TARGET_FREEBSD32_SECURE_PLT=1"
+ fi
+ ;;
+ *)
+ if test $fbsd_major -ge 13; then
+ tm_file="rs6000/secureplt.h ${tm_file}"
+ fi
+ tm_file="${tm_file} rs6000/freebsd.h"
+ ;;
+ esac
+ ;;
+powerpc-*-netbsd*)
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h ${nbsd_tm_file} freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
+ tmake_file="${tmake_file} rs6000/t-netbsd"
+ extra_options="${extra_options} rs6000/sysv4.opt"
+ ;;
+powerpc-*-eabisimaltivec*)
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
+ use_gcc_stdint=wrap
+ ;;
+powerpc-*-eabisim*)
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ use_gcc_stdint=wrap
+ ;;
+powerpc-*-elf*)
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ ;;
+powerpc-*-eabialtivec*)
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
+ use_gcc_stdint=wrap
+ ;;
+powerpc-*-eabi*)
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ use_gcc_stdint=wrap
+ ;;
+powerpc-*-rtems*)
+ tm_file="rs6000/biarch64.h ${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/rtems.h rtems.h"
+ extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
+ tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-rtems rs6000/t-ppccomm"
+ ;;
+powerpc*-*-linux*)
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h freebsd-spec.h rs6000/sysv4.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
+ tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm"
+ extra_objs="$extra_objs rs6000-linux.o"
+ case ${target} in
+ powerpc*le-*-*)
+ tm_file="${tm_file} rs6000/sysv4le.h" ;;
+ esac
+ case ${target}:${with_cpu} in
+ powerpc64*: | powerpc64*:native) cpu_is_64bit=yes ;;
+ esac
+ maybe_biarch=${cpu_is_64bit}
+ case ${enable_targets} in
+ *powerpc64*) maybe_biarch=yes ;;
+ all) maybe_biarch=yes ;;
+ esac
+ case ${target}:${enable_targets}:${maybe_biarch} in
+ powerpc64-* | powerpc-*:*:yes | *:*powerpc64-*:yes | *:all:yes \
+ | powerpc64le*:*powerpcle* | powerpc64le*:*powerpc-* \
+ | powerpcle-*:*powerpc64le*:yes)
+ if test x$cpu_is_64bit = xyes; then
+ tm_file="${tm_file} rs6000/default64.h"
+ fi
+ tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h"
+ tmake_file="$tmake_file rs6000/t-linux64"
+ case ${target} in
+ powerpc*le-*-*)
+ tmake_file="$tmake_file rs6000/t-linux64le"
+ case ${enable_targets} in
+ all | *powerpc64-* | *powerpc-*)
+ tmake_file="$tmake_file rs6000/t-linux64lebe" ;;
+ esac ;;
+ *)
+ case ${enable_targets} in
+ all | *powerpc64le-* | *powerpcle-*)
+ tmake_file="$tmake_file rs6000/t-linux64bele" ;;
+ esac ;;
+ esac
+ extra_options="${extra_options} rs6000/linux64.opt"
+ ;;
+ powerpc64*)
+ tm_file="${tm_file} rs6000/default64.h rs6000/linux64.h glibc-stdint.h"
+ extra_options="${extra_options} rs6000/linux64.opt"
+ tmake_file="${tmake_file} rs6000/t-linux"
+ ;;
+ *)
+ tm_file="${tm_file} rs6000/linux.h glibc-stdint.h"
+ tmake_file="${tmake_file} rs6000/t-ppcos rs6000/t-linux"
+ ;;
+ esac
+ case ${target} in
+ powerpc*-*-linux*ppc476*)
+ tm_file="${tm_file} rs6000/476.h"
+ extra_options="${extra_options} rs6000/476.opt" ;;
+ powerpc*-*-linux*altivec*)
+ tm_file="${tm_file} rs6000/linuxaltivec.h" ;;
+ esac
+ case ${target} in
+ *-linux*-musl*)
+ enable_secureplt=yes ;;
+ esac
+ if test x${enable_secureplt} = xyes; then
+ tm_file="rs6000/secureplt.h ${tm_file}"
+ fi
+ ;;
+powerpc*-wrs-vxworks7r*)
+
+ # Wind River 7 post SR0600 is mostly like Linux so we setup
+ # our config in a very similar fashion and adjust to a few
+ # specificities.
+
+ # The system compiler is configured with secureplt by default.
+ tm_file="${tm_file} rs6000/secureplt.h"
+
+ tm_file="${tm_file} elfos.h gnu-user.h linux.h freebsd-spec.h"
+ tm_file="${tm_file} rs6000/sysv4.h rs6000/biarch64.h rs6000/default64.h rs6000/linux64.h"
+ tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h"
+
+ extra_options="${extra_options} rs6000/sysv4.opt linux.opt rs6000/linux64.opt"
+
+ tmake_file="${tmake_file} t-linux rs6000/t-linux64 rs6000/t-fprules rs6000/t-ppccomm"
+ tmake_file="${tmake_file} rs6000/t-vxworks"
+
+ tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
+ extra_objs="$extra_objs linux.o rs6000-linux.o"
+ ;;
+powerpc-wrs-vxworks*)
+ tm_file="${tm_file} elfos.h gnu-user.h freebsd-spec.h rs6000/sysv4.h"
+ tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
+ extra_options="${extra_options} rs6000/sysv4.opt"
+ extra_headers="${extra_headers} ppc-asm.h"
+ case ${target} in
+ *-vxworksmils*)
+ tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/vxworksmils.h"
+ tmake_file="${tmake_file} rs6000/t-vxworksmils"
+ ;;
+ *-vxworksae*)
+ tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/vxworksae.h"
+ tmake_file="${tmake_file} rs6000/t-vxworksae"
+ ;;
+ *-vxworks*)
+ tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h"
+ ;;
+ esac
+ ;;
+powerpc-*-lynxos*)
+ xm_defines=POSIX
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
+ tmake_file="t-lynx rs6000/t-lynx"
+ extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
+ thread_file=lynx
+ gnu_ld=yes
+ gas=yes
+ ;;
+powerpcle-*-elf*)
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
+ ;;
+powerpcle-*-eabisim*)
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
+ use_gcc_stdint=wrap
+ ;;
+powerpcle-*-eabi*)
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
+ use_gcc_stdint=wrap
+ ;;
+pru*-*-*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file}"
+ tmake_file="${tmake_file} pru/t-pru"
+ extra_objs="pru-pragma.o pru-passes.o"
+ use_gcc_stdint=wrap
+ ;;
+rs6000-ibm-aix7.1.* | powerpc-ibm-aix7.1.*)
+ tmake_file="rs6000/t-aix52 t-slibgcc"
+ if test x$cpu_is_64bit = xyes; then
+ tm_file="${tm_file} rs6000/biarch64.h"
+ tmake_file="rs6000/t-aix64 t-slibgcc"
+ fi
+ tm_file="${tm_file} rs6000/aix.h rs6000/aix71.h rs6000/xcoff.h rs6000/aix-stdint.h"
+ extra_options="${extra_options} rs6000/aix64.opt"
+ use_collect2=yes
+ thread_file='aix'
+ use_gcc_stdint=wrap
+ default_use_cxa_atexit=yes
+ ;;
+rs6000-ibm-aix7.2.* | powerpc-ibm-aix7.2.*)
+ tmake_file="rs6000/t-aix52 t-slibgcc"
+ if test x$cpu_is_64bit = xyes; then
+ tm_file="${tm_file} rs6000/biarch64.h"
+ tmake_file="rs6000/t-aix64 t-slibgcc"
+ fi
+ tm_file="${tm_file} rs6000/aix.h rs6000/aix72.h rs6000/xcoff.h rs6000/aix-stdint.h"
+ extra_options="${extra_options} rs6000/aix64.opt"
+ use_collect2=yes
+ thread_file='aix'
+ use_gcc_stdint=wrap
+ default_use_cxa_atexit=yes
+ ;;
+rs6000-ibm-aix[789].* | powerpc-ibm-aix[789].*)
+ tmake_file="rs6000/t-aix52 t-slibgcc"
+ if test x$cpu_is_64bit = xyes; then
+ tm_file="${tm_file} rs6000/biarch64.h"
+ tmake_file="rs6000/t-aix64 t-slibgcc"
+ fi
+ tm_file="${tm_file} rs6000/aix.h rs6000/aix73.h rs6000/xcoff.h rs6000/aix-stdint.h"
+ extra_options="${extra_options} rs6000/aix64.opt"
+ use_collect2=yes
+ thread_file='aix'
+ use_gcc_stdint=wrap
+ default_use_cxa_atexit=yes
+ ;;
+rl78-*-elf*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file}"
+ target_has_targetm_common=no
+ c_target_objs="rl78-c.o"
+ cxx_target_objs="rl78-c.o"
+ tmake_file="${tmake_file} rl78/t-rl78"
+ ;;
+rx-*-elf*)
+ tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
+ tmake_file="${tmake_file} rx/t-rx"
+ extra_options="${extra_options} rx/elf.opt"
+ ;;
+rx-*-linux*)
+ tm_file="elfos.h linux.h glibc-stdint.h rx/linux.h ../../libgcc/config/rx/rx-abi.h"
+ tmake_file="${tmake_file} rx/t-linux"
+ ;;
+s390-*-linux*)
+ tm_file="s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
+ c_target_objs="${c_target_objs} s390-c.o"
+ cxx_target_objs="${cxx_target_objs} s390-c.o"
+ if test x$enable_targets = xall; then
+ tmake_file="${tmake_file} s390/t-linux64"
+ fi
+ tmake_file="${tmake_file} s390/t-s390"
+ ;;
+s390x-*-linux*)
+ tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
+ tm_p_file="linux-protos.h s390/s390-protos.h"
+ c_target_objs="${c_target_objs} s390-c.o"
+ cxx_target_objs="${cxx_target_objs} s390-c.o"
+ md_file=s390/s390.md
+ extra_modes=s390/s390-modes.def
+ out_file=s390/s390.cc
+ tmake_file="${tmake_file} s390/t-linux64 s390/t-s390"
+ ;;
+s390x-ibm-tpf*)
+ tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h glibc-stdint.h s390/tpf.h"
+ tm_p_file=s390/s390-protos.h
+ c_target_objs="${c_target_objs} s390-c.o"
+ cxx_target_objs="${cxx_target_objs} s390-c.o"
+ md_file=s390/s390.md
+ extra_modes=s390/s390-modes.def
+ out_file=s390/s390.cc
+ thread_file='tpf'
+ extra_options="${extra_options} s390/tpf.opt"
+ tmake_file="${tmake_file} s390/t-s390"
+ ;;
+sh-*-elf* | sh[12346l]*-*-elf* | \
+ sh-*-linux* | sh[2346lbe]*-*-linux* | \
+ sh-*-netbsdelf* | shl*-*-netbsdelf*)
+ tmake_file="${tmake_file} sh/t-sh sh/t-elf"
+ if test x${with_endian} = x; then
+ case ${target} in
+ sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
+ shbe-*-* | sheb-*-*) with_endian=big,little ;;
+ sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;;
+ shl* | sh*-*-linux* | \
+ sh-superh-elf) with_endian=little,big ;;
+ sh[1234]*-*-*) with_endian=big ;;
+ *) with_endian=big,little ;;
+ esac
+ fi
+ # TM_ENDIAN_CONFIG is used by t-sh to determine multilibs.
+ # First word : the default endian.
+ # Second word: the secondary endian (optional).
+ case ${with_endian} in
+ big) TM_ENDIAN_CONFIG=mb ;;
+ little) TM_ENDIAN_CONFIG=ml ;;
+ big,little) TM_ENDIAN_CONFIG="mb ml" ;;
+ little,big) TM_ENDIAN_CONFIG="ml mb" ;;
+ *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
+ esac
+ case ${with_endian} in
+ little*) tm_file="sh/little.h ${tm_file}" ;;
+ esac
+ tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h"
+ case ${target} in
+ sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
+ if test x$enable_fdpic = xyes; then
+ tm_defines="$tm_defines FDPIC_DEFAULT=1"
+ fi
+ tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h sh/linux.h" ;;
+ sh*-*-netbsd*)
+ tm_file="${tm_file} ${nbsd_tm_file} sh/netbsd-elf.h"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
+
+ ;;
+ sh*-superh-elf) if test x$with_libgloss != xno; then
+ with_libgloss=yes
+ tm_file="${tm_file} sh/newlib.h"
+ fi
+ tm_file="${tm_file} sh/embed-elf.h"
+ tm_file="${tm_file} sh/superh.h"
+ extra_options="${extra_options} sh/superh.opt" ;;
+ *) if test x$with_newlib = xyes \
+ && test x$with_libgloss = xyes; then
+ tm_file="${tm_file} sh/newlib.h"
+ fi
+ tm_file="${tm_file} sh/embed-elf.h" ;;
+ esac
+ case ${target} in
+ *-*-netbsd)
+ ;;
+ *-*-elf*)
+ tm_file="${tm_file} newlib-stdint.h"
+ ;;
+ esac
+ # sed el/eb endian suffixes away to avoid confusion with sh[23]e
+ case `echo ${target} | sed 's/e[lb]-/-/'` in
+ sh4a_single_only*) sh_cpu_target=sh4a-single-only ;;
+ sh4a_single*) sh_cpu_target=sh4a-single ;;
+ sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;;
+ sh4al) sh_cpu_target=sh4al ;;
+ sh4a*) sh_cpu_target=sh4a ;;
+ sh4_single_only*) sh_cpu_target=sh4-single-only ;;
+ sh4_single*) sh_cpu_target=sh4-single ;;
+ sh4_nofpu*) sh_cpu_target=sh4-nofpu ;;
+ sh4* | sh-superh-*) sh_cpu_target=sh4 ;;
+ sh3e*) sh_cpu_target=sh3e ;;
+ sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;;
+ sh2a_single_only*) sh_cpu_target=sh2a-single-only ;;
+ sh2a_single*) sh_cpu_target=sh2a-single ;;
+ sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;;
+ sh2a*) sh_cpu_target=sh2a ;;
+ sh2e*) sh_cpu_target=sh2e ;;
+ sh2*) sh_cpu_target=sh2 ;;
+ *) sh_cpu_target=sh1 ;;
+ esac
+ # did the user say --without-fp ?
+ if test x$with_fp = xno; then
+ case ${sh_cpu_target} in
+ sh4al | sh1) ;;
+ sh4a* ) sh_cpu_target=sh4a-nofpu ;;
+ sh4*) sh_cpu_target=sh4-nofpu ;;
+ sh3*) sh_cpu_target=sh3 ;;
+ sh2a*) sh_cpu_target=sh2a-nofpu ;;
+ sh2*) sh_cpu_target=sh2 ;;
+ *) echo --without-fp not available for $target: ignored
+ esac
+ tm_defines="$tm_defines STRICT_NOFPU=1"
+ fi
+ sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
+ case $sh_cpu_default in
+ sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
+ sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
+ sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
+ sh3e | sh3 | sh2e | sh2 | sh1) ;;
+ "") sh_cpu_default=${sh_cpu_target} ;;
+ *) echo "with_cpu=$with_cpu not supported"; exit 1 ;;
+ esac
+ sh_multilibs=${with_multilib_list}
+ if test "$sh_multilibs" = "default" ; then
+ case ${target} in
+ sh[1234]*) sh_multilibs=${sh_cpu_target} ;;
+ sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
+ sh*-*-linux*) sh_multilibs=m1,m2,m2a,m3e,m4 ;;
+ sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;;
+ *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
+ esac
+ if test x$with_fp = xno; then
+ sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
+ fi
+ fi
+ target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
+ tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
+ tm_defines="$tm_defines SUPPORT_`echo $sh_cpu_default | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
+ sh_multilibs=`echo $sh_multilibs | sed -e 's/,/ /g' -e 's/^[Ss][Hh]/m/' -e 's/ [Ss][Hh]/ m/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
+ for sh_multilib in ${sh_multilibs}; do
+ case ${sh_multilib} in
+ m1 | m2 | m2e | m3 | m3e | \
+ m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\
+ m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \
+ m2a | m2a-single | m2a-single-only | m2a-nofpu)
+ # TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition
+ # It is passed to MULTIILIB_OPTIONS verbatim.
+ TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}"
+ tm_defines="$tm_defines SUPPORT_`echo $sh_multilib | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
+ ;;
+ \!*) # TM_MULTILIB_EXCEPTIONS_CONFIG is used by t-sh
+ # It is passed the MULTILIB_EXCEPTIONS verbatim.
+ TM_MULTILIB_EXCEPTIONS_CONFIG="${TM_MULTILIB_EXCEPTIONS_CONFIG} `echo $sh_multilib | sed 's/^!//'`" ;;
+ *)
+ echo "with_multilib_list=${sh_multilib} not supported."
+ exit 1
+ ;;
+ esac
+ done
+ TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'`
+ if test x${enable_incomplete_targets} = xyes ; then
+ tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1"
+ fi
+ tm_file="$tm_file ./sysroot-suffix.h"
+ tmake_file="$tmake_file t-sysroot-suffix"
+ ;;
+sh-*-rtems*)
+ tmake_file="${tmake_file} sh/t-sh sh/t-rtems"
+ tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
+ ;;
+sh-wrs-vxworks)
+ tmake_file="$tmake_file sh/t-sh sh/t-vxworks"
+ tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
+ ;;
+sparc-*-elf*)
+ tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp-elf.h"
+ case ${target} in
+ *-leon-*)
+ tmake_file="sparc/t-sparc sparc/t-leon"
+ ;;
+ *-leon[3-9]*)
+ tmake_file="sparc/t-sparc sparc/t-leon3"
+ ;;
+ *)
+ tmake_file="sparc/t-sparc sparc/t-elf"
+ ;;
+ esac
+ ;;
+sparc-*-rtems*)
+ tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
+ tmake_file="${tmake_file} sparc/t-sparc sparc/t-rtems"
+ ;;
+sparc-*-linux*)
+ tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/tso.h"
+ extra_options="${extra_options} sparc/long-double-switch.opt"
+ case ${target} in
+ *-leon-*)
+ tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon"
+ ;;
+ *-leon[3-9]*)
+ tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon3"
+ ;;
+ *)
+ tmake_file="${tmake_file} sparc/t-sparc"
+ ;;
+ esac
+ if test x$enable_targets = xall; then
+ tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
+ tmake_file="${tmake_file} sparc/t-linux64"
+ else
+ tm_file="${tm_file} sparc/linux.h"
+ tmake_file="${tmake_file} sparc/t-linux"
+ fi
+ ;;
+sparc-*-netbsdelf*)
+ tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h ${nbsd_tm_file} sparc/netbsd-elf.h"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
+ extra_options="${extra_options} sparc/long-double-switch.opt"
+ tmake_file="${tmake_file} sparc/t-sparc"
+ ;;
+sparc*-*-solaris2*)
+ tm_file="sparc/biarch64.h ${tm_file} ${sol2_tm_file} sparc/tso.h"
+ case ${target} in
+ sparc64-*-* | sparcv9-*-*)
+ tm_file="sparc/default64.h ${tm_file}"
+ ;;
+ *)
+ test x$with_cpu != x || with_cpu=v9
+ ;;
+ esac
+ tmake_file="${tmake_file} sparc/t-sparc sparc/t-sol2"
+ ;;
+sparc-wrs-vxworks)
+ tm_file="${tm_file} elfos.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
+ tmake_file="${tmake_file} sparc/t-sparc sparc/t-vxworks"
+ ;;
+sparc64-*-elf*)
+ tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
+ extra_options="${extra_options}"
+ tmake_file="${tmake_file} sparc/t-sparc"
+ ;;
+sparc64-*-rtems*)
+ tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
+ extra_options="${extra_options}"
+ tmake_file="${tmake_file} sparc/t-sparc sparc/t-rtems-64"
+ ;;
+sparc64-*-linux*)
+ tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/default64.h sparc/linux64.h sparc/tso.h"
+ extra_options="${extra_options} sparc/long-double-switch.opt"
+ tmake_file="${tmake_file} sparc/t-sparc sparc/t-linux64"
+ ;;
+sparc64-*-freebsd*|ultrasparc-*-freebsd*)
+ tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
+ extra_options="${extra_options} sparc/long-double-switch.opt"
+ case "x$with_cpu" in
+ xultrasparc) ;;
+ x) with_cpu=ultrasparc ;;
+ *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
+ esac
+ tmake_file="${tmake_file} sparc/t-sparc"
+ ;;
+sparc64-*-netbsd*)
+ tm_file="sparc/biarch64.h ${tm_file}"
+ tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h ${nbsd_tm_file} sparc/netbsd-elf.h"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
+ extra_options="${extra_options} sparc/long-double-switch.opt"
+ tmake_file="${tmake_file} sparc/t-sparc sparc/t-netbsd64"
+ ;;
+sparc64-*-openbsd*)
+ tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp64-elf.h"
+ tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h"
+ extra_options="${extra_options} openbsd.opt"
+ extra_options="${extra_options}"
+ gas=yes gnu_ld=yes
+ with_cpu=ultrasparc
+ tmake_file="${tmake_file} sparc/t-sparc"
+ ;;
+tic6x-*-elf)
+ tm_file="elfos.h ${tm_file} c6x/elf-common.h c6x/elf.h"
+ tm_file="${tm_file} dbxelf.h tm-dwarf2.h newlib-stdint.h"
+ tmake_file="c6x/t-c6x c6x/t-c6x-elf"
+ use_collect2=no
+ ;;
+tic6x-*-uclinux)
+ tm_file="elfos.h ${tm_file} gnu-user.h linux.h c6x/elf-common.h c6x/uclinux-elf.h"
+ tm_file="${tm_file} dbxelf.h tm-dwarf2.h glibc-stdint.h"
+ tm_file="${tm_file} ./sysroot-suffix.h"
+ tmake_file="t-sysroot-suffix t-slibgcc"
+ tmake_file="${tmake_file} c6x/t-c6x c6x/t-c6x-elf c6x/t-c6x-uclinux"
+ use_collect2=no
+ ;;
+tilegx*-*-linux*)
+ tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h tilegx/linux.h ${tm_file}"
+ tmake_file="${tmake_file} tilegx/t-tilegx"
+ extra_objs="${extra_objs} mul-tables.o"
+ c_target_objs="${c_target_objs} tilegx-c.o"
+ cxx_target_objs="${cxx_target_objs} tilegx-c.o"
+ extra_headers="feedback.h"
+ case $target in
+ tilegxbe-*)
+ tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
+ ;;
+ esac
+ ;;
+tilepro*-*-linux*)
+ tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h tilepro/linux.h ${tm_file}"
+ tmake_file="${tmake_file} tilepro/t-tilepro"
+ extra_objs="${extra_objs} mul-tables.o"
+ c_target_objs="${c_target_objs} tilepro-c.o"
+ cxx_target_objs="${cxx_target_objs} tilepro-c.o"
+ extra_headers="feedback.h"
+ ;;
+v850-*-rtems*)
+ target_cpu_default="TARGET_CPU_generic"
+ tm_file="elfos.h v850/v850.h"
+ tm_file="${tm_file} v850/rtems.h rtems.h newlib-stdint.h"
+ tmake_file="${tmake_file} v850/t-v850"
+ tmake_file="${tmake_file} v850/t-rtems"
+ use_collect2=no
+ c_target_objs="v850-c.o"
+ cxx_target_objs="v850-c.o"
+ ;;
+v850*-*-*)
+ case ${target} in
+ v850e3v5-*-*)
+ target_cpu_default="TARGET_CPU_v850e3v5"
+ ;;
+ v850e2v3-*-*)
+ target_cpu_default="TARGET_CPU_v850e2v3"
+ ;;
+ v850e2-*-*)
+ target_cpu_default="TARGET_CPU_v850e2"
+ ;;
+ v850e1-*-* | v850es-*-*)
+ target_cpu_default="TARGET_CPU_v850e1"
+ ;;
+ v850e-*-*)
+ target_cpu_default="TARGET_CPU_v850e"
+ ;;
+ v850-*-*)
+ target_cpu_default="TARGET_CPU_generic"
+ ;;
+ esac
+ tm_file="elfos.h newlib-stdint.h v850/v850.h"
+ use_collect2=no
+ c_target_objs="v850-c.o"
+ cxx_target_objs="v850-c.o"
+ use_gcc_stdint=wrap
+ ;;
+vax-*-linux*)
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h vax/elf.h vax/linux.h"
+ extra_options="${extra_options} vax/elf.opt"
+ ;;
+vax-*-netbsdelf*)
+ tm_file="${tm_file} elfos.h ${nbsd_tm_file} vax/elf.h vax/netbsd-elf.h"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt vax/elf.opt"
+ tm_defines="${tm_defines} CHAR_FAST8=1 SHORT_FAST16=1"
+ ;;
+visium-*-elf*)
+ tm_file="dbxelf.h elfos.h ${tm_file} visium/elf.h newlib-stdint.h"
+ tmake_file="visium/t-visium visium/t-crtstuff"
+ ;;
+xstormy16-*-elf)
+ # For historical reasons, the target files omit the 'x'.
+ tm_file="dbxelf.h elfos.h newlib-stdint.h stormy16/stormy16.h"
+ tm_p_file=stormy16/stormy16-protos.h
+ tm_d_file="elfos.h stormy16/stormy16.h"
+ md_file=stormy16/stormy16.md
+ out_file=stormy16/stormy16.cc
+ extra_options=stormy16/stormy16.opt
+ tmake_file="stormy16/t-stormy16"
+ ;;
+xtensa*-*-elf*)
+ tm_file="${tm_file} elfos.h newlib-stdint.h xtensa/elf.h"
+ extra_options="${extra_options} xtensa/elf.opt"
+ ;;
+xtensa*-*-linux*)
+ tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/linux.h"
+ tmake_file="${tmake_file} xtensa/t-xtensa"
+ ;;
+xtensa*-*-uclinux*)
+ tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/uclinux.h"
+ tmake_file="${tmake_file} xtensa/t-xtensa"
+ extra_options="${extra_options} xtensa/uclinux.opt"
+ ;;
+am33_2.0-*-linux*)
+ tm_file="mn10300/mn10300.h elfos.h gnu-user.h linux.h glibc-stdint.h mn10300/linux.h"
+ gas=yes gnu_ld=yes
+ use_collect2=no
+ ;;
+m32c-*-rtems*)
+ tm_file="elfos.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h"
+ c_target_objs="m32c-pragma.o"
+ cxx_target_objs="m32c-pragma.o"
+ ;;
+m32c-*-elf*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file}"
+ c_target_objs="m32c-pragma.o"
+ cxx_target_objs="m32c-pragma.o"
+ ;;
+*)
+ echo "*** Configuration ${target} not supported" 1>&2
+ exit 1
+ ;;
+esac
+
+case ${target} in
+i[34567]86-*-linux* | x86_64-*-linux*)
+ tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386"
+ ;;
+i[34567]86-*-* | x86_64-*-*)
+ tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386"
+ ;;
+powerpc*-*-* | rs6000-*-*)
+ tm_file="${tm_file} ${cpu_type}/option-defaults.h"
+esac
+
+# non-glibc systems
+case ${target} in
+*-linux-musl*)
+ tmake_file="${tmake_file} t-musl"
+ ;;
+*-linux-uclibc*)
+ tmake_file="${tmake_file} t-uclibc"
+ ;;
+esac
+
+# Assume the existence of indirect function support and allow the use of the
+# resolver attribute.
+case ${target} in
+*-*-linux*android*|*-*-linux*uclibc*|*-*-linux*musl*)
+ ;;
+*-*-kfreebsd*-gnu | *-*-kopensolaris*-gnu)
+ ;;
+*-*-linux* | *-*-gnu*)
+ case ${target} in
+ aarch64*-* | arm*-* | i[34567]86-* | powerpc*-* | s390*-* | sparc*-* | x86_64-* | loongarch*-*)
+ default_gnu_indirect_function=yes
+ ;;
+ esac
+ ;;
+esac
+
+# Build mkoffload tool
+case ${target} in
+*-intelmic-* | *-intelmicemul-*)
+ tmake_file="${tmake_file} i386/t-intelmic"
+ tm_file="${tm_file} i386/intelmic-offload.h"
+ ;;
+esac
+
+if [ "$target_has_targetcm" = "no" ]; then
+ c_target_objs="$c_target_objs default-c.o"
+ cxx_target_objs="$cxx_target_objs default-c.o"
+fi
+
+if [ "$common_out_file" = "" ]; then
+ if [ "$target_has_targetm_common" = "yes" ]; then
+ common_out_file="$cpu_type/$cpu_type-common.cc"
+ else
+ common_out_file="default-common.cc"
+ fi
+fi
+
+if [ "$target_has_targetdm" = "no" ]; then
+ d_target_objs="$d_target_objs default-d.o"
+fi
+
+# Support for --with-cpu and related options (and a few unrelated options,
+# too).
+case ${with_cpu} in
+ yes | no)
+ echo "--with-cpu must be passed a value" 1>&2
+ exit 1
+ ;;
+esac
+
+# Set arch and cpu from ${target} and ${target_noncanonical}. Set cpu
+# to generic if there is no processor scheduler model for the target.
+arch=
+cpu=
+arch_without_sse2=no
+arch_without_64bit=no
+case ${target} in
+ i386-*-freebsd*)
+ if test $fbsd_major -ge 6; then
+ arch=i486
+ else
+ arch=i386
+ fi
+ cpu=generic
+ arch_without_sse2=yes
+ arch_without_64bit=yes
+ ;;
+ i386-*-netbsd*)
+ arch=i486
+ cpu=generic
+ arch_without_sse2=yes
+ arch_without_64bit=yes
+ ;;
+ i386-*-*)
+ arch=i386
+ cpu=i386
+ arch_without_sse2=yes
+ arch_without_64bit=yes
+ ;;
+ i486-*-*)
+ arch=i486
+ cpu=i486
+ arch_without_sse2=yes
+ arch_without_64bit=yes
+ ;;
+ i586-*-*)
+ arch_without_sse2=yes
+ arch_without_64bit=yes
+ case ${target_noncanonical} in
+ k6_2-*)
+ arch=k6-2
+ cpu=k6-2
+ ;;
+ k6_3-*)
+ arch=k6-3
+ cpu=k6-3
+ ;;
+ k6-*)
+ arch=k6
+ cpu=k6
+ ;;
+ pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
+ arch=pentium-mmx
+ cpu=pentium-mmx
+ ;;
+ *)
+ arch=pentium
+ cpu=pentium
+ ;;
+ esac
+ ;;
+ i686-*-* | i786-*-*)
+ case ${target_noncanonical} in
+ znver1-*)
+ arch=znver1
+ cpu=znver1
+ ;;
+ znver2-*)
+ arch=znver2
+ cpu=znver2
+ ;;
+ znver3-*)
+ arch=znver3
+ cpu=znver3
+ ;;
+ bdver4-*)
+ arch=bdver4
+ cpu=bdver4
+ ;;
+ bdver3-*)
+ arch=bdver3
+ cpu=bdver3
+ ;;
+ bdver2-*)
+ arch=bdver2
+ cpu=bdver2
+ ;;
+ bdver1-*)
+ arch=bdver1
+ cpu=bdver1
+ ;;
+ btver1-*)
+ arch=btver1
+ cpu=btver1
+ ;;
+ btver2-*)
+ arch=btver2
+ cpu=btver2
+ ;;
+ amdfam10-*|barcelona-*)
+ arch=amdfam10
+ cpu=amdfam10
+ ;;
+ k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
+ arch=k8-sse3
+ cpu=k8-sse3
+ ;;
+ k8-*|opteron-*|athlon64-*|athlon_fx-*)
+ arch=k8
+ cpu=k8
+ ;;
+ athlon_xp-*|athlon_mp-*|athlon_4-*)
+ arch=athlon-4
+ cpu=athlon-4
+ arch_without_sse2=yes
+ arch_without_64bit=yes
+ ;;
+ athlon_tbird-*|athlon-*)
+ arch=athlon
+ cpu=athlon
+ arch_without_sse2=yes
+ ;;
+ geode-*)
+ arch=geode
+ cpu=geode
+ arch_without_sse2=yes
+ ;;
+ pentium2-*)
+ arch=pentium2
+ cpu=pentium2
+ arch_without_sse2=yes
+ ;;
+ pentium3-*|pentium3m-*)
+ arch=pentium3
+ cpu=pentium3
+ arch_without_sse2=yes
+ ;;
+ pentium4-*|pentium4m-*)
+ arch=pentium4
+ cpu=pentium4
+ ;;
+ prescott-*)
+ arch=prescott
+ cpu=prescott
+ ;;
+ nocona-*)
+ arch=nocona
+ cpu=nocona
+ ;;
+ atom-*)
+ arch=atom
+ cpu=atom
+ ;;
+ slm-*)
+ arch=slm
+ cpu=slm
+ ;;
+ core2-*)
+ arch=core2
+ cpu=core2
+ ;;
+ corei7-*)
+ arch=corei7
+ cpu=corei7
+ ;;
+ corei7_avx-*)
+ arch=corei7-avx
+ cpu=corei7-avx
+ ;;
+ pentium_m-*)
+ arch=pentium-m
+ cpu=pentium-m
+ ;;
+ pentiumpro-*)
+ arch=pentiumpro
+ cpu=pentiumpro
+ arch_without_sse2=yes
+ ;;
+ *)
+ arch=pentiumpro
+ cpu=generic
+ arch_without_sse2=yes
+ arch_without_64bit=yes
+ ;;
+ esac
+ ;;
+ x86_64-*-*)
+ case ${target_noncanonical} in
+ znver1-*)
+ arch=znver1
+ cpu=znver1
+ ;;
+ znver2-*)
+ arch=znver2
+ cpu=znver2
+ ;;
+ znver3-*)
+ arch=znver3
+ cpu=znver3
+ ;;
+ bdver4-*)
+ arch=bdver4
+ cpu=bdver4
+ ;;
+ bdver3-*)
+ arch=bdver3
+ cpu=bdver3
+ ;;
+ bdver2-*)
+ arch=bdver2
+ cpu=bdver2
+ ;;
+ bdver1-*)
+ arch=bdver1
+ cpu=bdver1
+ ;;
+ btver1-*)
+ arch=btver1
+ cpu=btver1
+ ;;
+ btver2-*)
+ arch=btver2
+ cpu=btver2
+ ;;
+ amdfam10-*|barcelona-*)
+ arch=amdfam10
+ cpu=amdfam10
+ ;;
+ k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
+ arch=k8-sse3
+ cpu=k8-sse3
+ ;;
+ k8-*|opteron-*|athlon_64-*)
+ arch=k8
+ cpu=k8
+ ;;
+ nocona-*)
+ arch=nocona
+ cpu=nocona
+ ;;
+ atom-*)
+ arch=atom
+ cpu=atom
+ ;;
+ slm-*)
+ arch=slm
+ cpu=slm
+ ;;
+ core2-*)
+ arch=core2
+ cpu=core2
+ ;;
+ corei7-*)
+ arch=corei7
+ cpu=corei7
+ ;;
+ *)
+ arch=x86-64
+ cpu=generic
+ ;;
+ esac
+ ;;
+esac
+
+# If there is no $with_cpu option, try to infer one from ${target}.
+# This block sets nothing except for with_cpu.
+if test x$with_cpu = x ; then
+ case ${target} in
+ i[34567]86-*-elfiamcu)
+ with_cpu=lakemont
+ ;;
+ i[34567]86-*-*|x86_64-*-*)
+ with_cpu=$cpu
+ ;;
+ alphaev6[78]*-*-*)
+ with_cpu=ev67
+ ;;
+ alphaev6*-*-*)
+ with_cpu=ev6
+ ;;
+ alphapca56*-*-*)
+ with_cpu=pca56
+ ;;
+ alphaev56*-*-*)
+ with_cpu=ev56
+ ;;
+ alphaev5*-*-*)
+ with_cpu=ev5
+ ;;
+ frv-*-*linux* | frv400-*-*linux*)
+ with_cpu=fr400
+ ;;
+ frv550-*-*linux*)
+ with_cpu=fr550
+ ;;
+ m68k*-*-*)
+ case "$with_arch" in
+ "cf")
+ with_cpu=${default_cf_cpu}
+ ;;
+ "" | "m68k")
+ with_cpu=m${default_m68k_cpu}
+ ;;
+ esac
+ ;;
+ sparc*-*-*)
+ case ${target} in
+ *-leon-*)
+ with_cpu=leon
+ ;;
+ *-leon[3-9]*)
+ with_cpu=leon3
+ ;;
+ *-leon[3-9]v7*)
+ with_cpu=leon3v7
+ ;;
+ *)
+ with_cpu="`echo ${target} | sed 's/-.*$//'`"
+ ;;
+ esac
+ ;;
+ visium-*-*)
+ with_cpu=gr5
+ ;;
+ esac
+
+ # Avoid overriding --with-cpu-32 and --with-cpu-64 values.
+ case ${target} in
+ i[34567]86-*-*|x86_64-*-*)
+ if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then
+ if test x$with_cpu_32 = x; then
+ with_cpu_32=$with_cpu
+ fi
+ if test x$with_cpu_64 = x; then
+ with_cpu_64=$with_cpu
+ fi
+ with_cpu=
+ fi
+ ;;
+ esac
+fi
+
+# Support for --with-arch and related options (and a few unrelated options,
+# too).
+case ${with_arch} in
+ yes | no)
+ echo "--with-arch must be passed a value" 1>&2
+ exit 1
+ ;;
+esac
+
+# If there is no $with_arch option, try to infer one from ${target}.
+# This block sets nothing except for with_arch.
+if test x$with_arch = x ; then
+ case ${target} in
+ i[34567]86-*-darwin*|x86_64-*-darwin*)
+ # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
+ # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
+ ;;
+ i[34567]86-*-elfiamcu)
+ with_arch=lakemont
+ ;;
+ i[34567]86-*-*)
+ # --with-fpmath sets the default ISA to SSE2, which is the same
+ # ISA supported by Pentium 4.
+ if test x$with_fpmath = x || test $arch_without_sse2 = no; then
+ with_arch=$arch
+ else
+ with_arch=pentium4
+ fi
+ ;;
+ x86_64-*-*)
+ with_arch=$arch
+ ;;
+ mips64r5900-*-* | mips64r5900el-*-* | mipsr5900-*-* | mipsr5900el-*-*)
+ with_arch=r5900
+ ;;
+ mips*-*-vxworks)
+ with_arch=mips2
+ ;;
+ esac
+
+ # Avoid overriding --with-arch-32 and --with-arch-64 values.
+ case ${target} in
+ i[34567]86-*-darwin*|x86_64-*-darwin*)
+ # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
+ # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
+ ;;
+ i[34567]86-*-*|x86_64-*-*)
+ if test x$with_arch_32 != x || test x$with_arch_64 != x; then
+ if test x$with_arch_32 = x; then
+ with_arch_32=$with_arch
+ fi
+ if test x$with_arch_64 = x; then
+ if test $arch_without_64bit = yes; then
+ # Set the default 64bit arch to x86-64 if the default arch
+ # doesn't support 64bit.
+ with_arch_64=x86-64
+ else
+ with_arch_64=$with_arch
+ fi
+ fi
+ with_arch=
+ elif test $arch_without_64bit$need_64bit_isa = yesyes; then
+ # Set the default 64bit arch to x86-64 if the default arch
+ # doesn't support 64bit and we need 64bit ISA.
+ with_arch_32=$with_arch
+ with_arch_64=x86-64
+ with_arch=
+ fi
+ ;;
+ esac
+fi
+
+# Infer a default setting for --with-float.
+if test x$with_float = x; then
+ case ${target} in
+ mips64r5900-*-* | mips64r5900el-*-* | mipsr5900-*-* | mipsr5900el-*-*)
+ # The R5900 doesn't support 64-bit float. 32-bit float doesn't
+ # comply with IEEE 754.
+ with_float=soft
+ ;;
+ esac
+fi
+
+# Infer a default setting for --with-fpu.
+if test x$with_fpu = x; then
+ case ${target} in
+ mips64r5900-*-* | mips64r5900el-*-* | mipsr5900-*-* | mipsr5900el-*-*)
+ # The R5900 FPU only supports single precision.
+ with_fpu=single
+ ;;
+ esac
+fi
+
+# Support --with-fpmath.
+if test x$with_fpmath != x; then
+ case ${target} in
+ i[34567]86-*-* | x86_64-*-*)
+ case ${with_fpmath} in
+ avx)
+ tm_file="${tm_file} i386/avxmath.h"
+ ;;
+ sse)
+ tm_file="${tm_file} i386/ssemath.h"
+ ;;
+ *)
+ echo "Invalid --with-fpmath=$with_fpmath" 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+ *)
+ echo "--with-fpmath isn't supported for $target." 1>&2
+ exit 1
+ ;;
+ esac
+fi
+
+# Similarly for --with-schedule.
+if test x$with_schedule = x; then
+ case ${target} in
+ hppa1*)
+ # Override default PA8000 scheduling model.
+ with_schedule=7100LC
+ ;;
+ esac
+fi
+
+# Infer a default setting for --with-llsc.
+if test x$with_llsc = x; then
+ case ${target} in
+ mips*-*-linux*)
+ # The kernel emulates LL and SC where necessary.
+ with_llsc=yes
+ ;;
+ mips64r5900-*-* | mips64r5900el-*-* | mipsr5900-*-* | mipsr5900el-*-*)
+ # The R5900 doesn't support LL(D) and SC(D).
+ with_llsc=no
+ ;;
+ esac
+fi
+
+# Validate and mark as valid any --with options supported
+# by this target. In order to use a particular --with option
+# you must list it in supported_defaults; validating the value
+# is optional. This case statement should set nothing besides
+# supported_defaults.
+
+supported_defaults=
+case "${target}" in
+ aarch64*-*-*)
+ supported_defaults="abi cpu cpu_64 arch arch_64 tune tune_64"
+ if test x$with_cpu_64 != x && test x$with_cpu = x; then
+ with_cpu=$with_cpu_64
+ fi
+ if test x$with_arch_64 != x && test x$with_arch = x; then
+ with_arch=$with_arch_64
+ fi
+ if test x$with_tune_64 != x && test x$with_tune = x; then
+ with_tune=$with_tune_64
+ fi
+ for which in cpu arch tune; do
+ eval "val=\$with_$which"
+ base_val=`echo $val | sed -e 's/\+.*//'`
+ ext_val=`echo $val | sed -e 's/[a-z0-9.-]\+//'`
+
+ if [ $which = arch ]; then
+ def=aarch64-arches.def
+ pattern=AARCH64_ARCH
+ else
+ def=aarch64-cores.def
+ pattern=AARCH64_CORE
+ fi
+
+ ext_mask=AARCH64_CPU_DEFAULT_FLAGS
+
+ # Find the base CPU or ARCH id in aarch64-cores.def or
+ # aarch64-arches.def
+ if [ x"$base_val" = x ] \
+ || grep "^$pattern(\"$base_val\"," \
+ ${srcdir}/config/aarch64/$def \
+ > /dev/null; then
+
+ if [ $which = arch ]; then
+ base_id=`grep "^$pattern(\"$base_val\"," \
+ ${srcdir}/config/aarch64/$def | \
+ sed -e 's/^[^,]*,[ ]*//' | \
+ sed -e 's/,.*$//'`
+ # Extract the architecture flags from aarch64-arches.def
+ ext_mask=`grep "^$pattern(\"$base_val\"," \
+ ${srcdir}/config/aarch64/$def | \
+ sed -e 's/)$//' | \
+ sed -e 's/^.*,//'`
+ else
+ base_id=`grep "^$pattern(\"$base_val\"," \
+ ${srcdir}/config/aarch64/$def | \
+ sed -e 's/^[^,]*,[ ]*//' | \
+ sed -e 's/,.*$//'`
+ fi
+
+ # Disallow extensions in --with-tune=cortex-a53+crc.
+ if [ $which = tune ] && [ x"$ext_val" != x ]; then
+ echo "Architecture extensions not supported in --with-$which=$val" 1>&2
+ exit 1
+ fi
+
+ # Use the pre-processor to strip flatten the options.
+ # This makes the format less rigid than if we use
+ # grep and sed directly here.
+ opt_macro="AARCH64_OPT_EXTENSION(A, B, C, D, E, F)=A, B, C, D, E, F"
+ options_parsed="`$ac_cv_prog_CPP -D"$opt_macro" -x c \
+ ${srcdir}/config/aarch64/aarch64-option-extensions.def`"
+
+ # Match one element inside AARCH64_OPT_EXTENSION, we
+ # consume anything that's not a ,.
+ elem="[ ]*\([^,]\+\)[ ]*"
+
+ # Repeat the pattern for the number of entries in the
+ # AARCH64_OPT_EXTENSION, currently 6 times.
+ sed_patt="^$elem,$elem,$elem,$elem,$elem,$elem"
+
+ while [ x"$ext_val" != x ]
+ do
+ ext_val=`echo $ext_val | sed -e 's/\+//'`
+ ext=`echo $ext_val | sed -e 's/\+.*//'`
+ base_ext=`echo $ext | sed -e 's/^no//'`
+ opt_line=`echo -e "$options_parsed" | \
+ grep "^\"$base_ext\""`
+
+ if [ x"$base_ext" = x ] \
+ || [[ -n $opt_line ]]; then
+
+ # These regexp extract the elements based on
+ # their group match index in the regexp.
+ ext_canon=`echo -e "$opt_line" | \
+ sed -e "s/$sed_patt/\2/"`
+ ext_on=`echo -e "$opt_line" | \
+ sed -e "s/$sed_patt/\3/"`
+ ext_off=`echo -e "$opt_line" | \
+ sed -e "s/$sed_patt/\4/"`
+
+ if [ $ext = $base_ext ]; then
+ # Adding extension
+ ext_mask="("$ext_mask") | ("$ext_on" | "$ext_canon")"
+ else
+ # Removing extension
+ ext_mask="("$ext_mask") & ~("$ext_off" | "$ext_canon")"
+ fi
+
+ true
+ else
+ echo "Unknown extension used in --with-$which=$val" 1>&2
+ exit 1
+ fi
+ ext_val=`echo $ext_val | sed -e 's/[a-z0-9]\+//'`
+ done
+
+ ext_mask="(("$ext_mask") << TARGET_CPU_NBITS)"
+ if [ x"$base_id" != x ]; then
+ target_cpu_cname="TARGET_CPU_$base_id | $ext_mask"
+ fi
+ true
+ else
+ # Allow --with-$which=native.
+ if [ "$val" = native ]; then
+ true
+ else
+ echo "Unknown $which used in --with-$which=$val" 1>&2
+ exit 1
+ fi
+ fi
+ done
+ ;;
+
+ alpha*-*-*)
+ supported_defaults="cpu tune"
+ for which in cpu tune; do
+ eval "val=\$with_$which"
+ case "$val" in
+ "" \
+ | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
+ | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
+ | 21264a)
+ ;;
+ *)
+ echo "Unknown CPU used in --with-$which=$val" 1>&2
+ exit 1
+ ;;
+ esac
+ done
+ ;;
+
+ arc*-*-*)
+ supported_defaults="cpu fpu"
+
+ new_cpu=hs38_linux
+ if [ x"$with_cpu" = x ] \
+ || grep -q -E "^ARC_CPU[[:blank:]]*\($with_cpu," \
+ ${srcdir}/config/arc/arc-cpus.def
+ then
+ # Ok
+ new_cpu=$with_cpu
+ else
+ echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
+ exit 1
+ fi
+
+ # see if --with-fpu matches any of the supported FPUs
+ case "$with_fpu" in
+ "")
+ # OK
+ ;;
+ fpus | fpus_div | fpus_fma | fpus_all)
+ # OK if em or hs
+ flags_ok="[emhs]+"
+ ;;
+ fpuda | fpuda_div | fpuda_fma | fpuda_all)
+ # OK only em
+ flags_ok="em"
+ ;;
+ fpud | fpud_div | fpud_fma | fpud_all)
+ # OK only hs
+ flags_ok="hs"
+ ;;
+ *)
+ echo "Unknown floating point type used in "\
+ "--with-fpu=$with_fpu" 1>&2
+ exit 1
+ ;;
+ esac
+
+ if [ -n "$flags_ok" ] \
+ && ! grep -q -E "^ARC_CPU[[:blank:]]*\($new_cpu,[[:blank:]]*$flags_ok," \
+ ${srcdir}/config/arc/arc-cpus.def
+ then
+ echo "Unknown floating point type used in "\
+ "--with-fpu=$with_fpu for cpu $new_cpu" 1>&2
+ exit 1
+ fi
+ ;;
+
+ avr-*-*)
+ # Handle --with-multilib-list.
+ if test "x${with_multilib_list}" != xdefault; then
+ TM_MULTILIB_CONFIG="${with_multilib_list}"
+ fi
+ ;;
+
+ csky-*-*)
+ supported_defaults="cpu endian float"
+ ;;
+
+ arm*-*-*)
+ supported_defaults="arch cpu float tune fpu abi mode tls"
+ for which in cpu tune arch; do
+ # See if it matches a supported value
+ eval "val=\$with_$which"
+ if [ x"$val" != x ]; then
+ cpu=`awk -f ${srcdir}/config/arm/parsecpu.awk \
+ -v cmd="chk$which $val" \
+ ${srcdir}/config/arm/arm-cpus.in`
+ if [ "$cpu" = "error" ]; then
+ echo "Unknown target in --with-$which=$val" 1>&2
+ exit 1
+ else
+ new_val=$cpu
+ eval "target_${which}_cname=$new_val"
+ echo "For $val real value is $new_val"
+ fi
+ fi
+ done
+
+ case "$with_float" in
+ "" \
+ | soft | hard | softfp)
+ # OK
+ ;;
+ *)
+ echo "Unknown floating point type used in --with-float=$with_float" 1>&2
+ exit 1
+ ;;
+ esac
+
+ # see if --with-fpu matches any of the supported FPUs
+ if [ x"$with_fpu" != x ] ; then
+ val=$with_fpu
+ fpu=`awk -f ${srcdir}/config/arm/parsecpu.awk \
+ -v cmd="chkfpu $val" \
+ ${srcdir}/config/arm/arm-cpus.in`
+ if [ "$fpu" = "error" ]
+ then
+ echo "Unknown target in --with-fpu=$val" 1>&2
+ exit 1
+ fi
+ fi
+
+ case "$with_abi" in
+ "" \
+ | apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux )
+ #OK
+ ;;
+ *)
+ echo "Unknown ABI used in --with-abi=$with_abi"
+ exit 1
+ ;;
+ esac
+
+ case "$with_mode" in
+ "" \
+ | arm | thumb )
+ #OK
+ ;;
+ *)
+ echo "Unknown mode used in --with-mode=$with_mode"
+ exit 1
+ ;;
+ esac
+
+ case "$with_tls" in
+ "" \
+ | gnu | gnu2)
+ # OK
+ ;;
+ *)
+ echo "Unknown TLS method used in --with-tls=$with_tls" 1>&2
+ exit 1
+ ;;
+ esac
+
+ if test "x$with_arch" != x && test "x$with_cpu" != x; then
+ echo "Switch \"--with-arch\" may not be used with switch \"--with-cpu\"" 1>&2
+ exit 1
+ fi
+
+ if test "x$with_cpu" != x && test "x$with_tune" != x; then
+ echo "Switch \"--with-tune\" may not be used with switch \"--with-cpu\"" 1>&2
+ exit 1
+ fi
+
+ # Add extra multilibs
+ if test "x$with_multilib_list" != x; then
+ ml=
+ arm_multilibs=`echo $with_multilib_list | sed -e 's/,/ /g'`
+ if test "x${arm_multilibs}" != xdefault ; then
+ for arm_multilib in ${arm_multilibs}; do
+ case ${arm_multilib} in
+ aprofile|rmprofile)
+ tmake_profile_file="arm/t-multilib"
+ ;;
+ @*)
+ ml=`echo "X$arm_multilib" | sed '1s,^X@,,'`
+ if test -f "${srcdir}/config/arm/${ml}"; then
+ tmake_file="${tmake_file} arm/${ml}"
+ else
+ echo "Error: ${ml} does not exist in ${srcdir}/config/arm" >&2
+ exit 1
+ fi
+ ;;
+ *)
+ echo "Error: --with-multilib-list=${with_multilib_list} not supported." 1>&2
+ exit 1
+ ;;
+ esac
+ done
+ fi
+
+ if test "x${tmake_profile_file}" != x ; then
+ # arm/t-aprofile and arm/t-rmprofile are only
+ # designed to work without any with-cpu,
+ # with-arch, with-mode, with-fpu or with-float
+ # options.
+ if test "x$with_arch" != x \
+ || test "x$with_cpu" != x \
+ || test "x$with_float" != x \
+ || test "x$with_fpu" != x \
+ || test "x$with_mode" != x ; then
+ echo "Error: You cannot use any of --with-arch/cpu/fpu/float/mode with --with-multilib-list=${with_multilib_list}" 1>&2
+ exit 1
+ elif test "x$ml" != x ; then
+ echo "Error: You cannot use builtin multilib profiles along with custom ones" 1>&2
+ exit 1
+ fi
+ # But pass the default value for float-abi
+ # through to the multilib selector
+ with_float="soft"
+ tmake_file="${tmake_file} ${tmake_profile_file}"
+ TM_MULTILIB_CONFIG="$with_multilib_list"
+ fi
+ fi
+ target_cpu_cname=${target_cpu_cname:-arm7tdmi}
+ with_cpu=${with_cpu:-$target_cpu_cname}
+ ;;
+
+ fr*-*-*linux*)
+ supported_defaults=cpu
+ case "$with_cpu" in
+ fr400) ;;
+ fr550) ;;
+ *)
+ echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+
+ fido-*-* | m68k*-*-*)
+ supported_defaults="arch cpu"
+ case "$with_arch" in
+ "" | "m68k"| "cf")
+ m68k_arch_family="$with_arch"
+ ;;
+ *)
+ echo "Invalid --with-arch=$with_arch" 1>&2
+ exit 1
+ ;;
+ esac
+
+ # We always have a $with_cpu setting here.
+ case "$with_cpu" in
+ "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
+ m68k_cpu_ident=$with_cpu
+ ;;
+ "m68020-40")
+ m68k_cpu_ident=m68020
+ tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
+ ;;
+ "m68020-60")
+ m68k_cpu_ident=m68020
+ tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
+ ;;
+ *)
+ # We need the C identifier rather than the string.
+ m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
+ 'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
+ $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
+ ${srcdir}/config/m68k/m68k-devices.def`
+ if [ x"$m68k_cpu_ident" = x ] ; then
+ echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
+ exit 1
+ fi
+ with_cpu="mcpu=$with_cpu"
+ ;;
+ esac
+ ;;
+
+ amdgcn-*-*)
+ supported_defaults="arch tune"
+
+ for which in arch tune; do
+ eval "val=\$with_$which"
+ case ${val} in
+ "" | fiji | gfx900 | gfx906 )
+ # OK
+ ;;
+ *)
+ echo "Unknown cpu used in --with-$which=$val." 1>&2
+ exit 1
+ ;;
+ esac
+ done
+ [ "x$with_arch" = x ] && with_arch=fiji
+ ;;
+
+ hppa*-*-*)
+ supported_defaults="arch schedule"
+
+ case "$with_arch" in
+ "" | 1.0 | 1.1 | 2.0)
+ # OK
+ ;;
+ *)
+ echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case "$with_schedule" in
+ "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
+ # OK
+ ;;
+ *)
+ echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+
+ i[34567]86-*-* | x86_64-*-*)
+ supported_defaults="abi arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64"
+ for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do
+ eval "val=\$with_$which"
+ case " $x86_archs " in
+ *" ${val} "*)
+ case "${target}" in
+ x86_64-*-*)
+ case "x$which" in
+ *_32)
+ ;;
+ *)
+ echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+ esac
+ # OK
+ ;;
+ *)
+ if test x${val} != x; then
+ case " $x86_64_archs " in
+ *" ${val} "*)
+ # Disallow x86-64-v* for --with-cpu=/--with-tune=
+ case "x$which$val" in
+ xcpu*x86-64-v*|xtune*x86-64-v*)
+ echo "Unknown CPU given in --with-$which=$val." 1>&2
+ exit 1
+ ;;
+ *)
+ ;;
+ esac
+ # OK
+ ;;
+ *)
+ # Allow $x86_cpus --with-cpu=/--with-tune=
+ case "x$which" in
+ xcpu*|xtune*)
+ case " $x86_cpus " in
+ *" ${val} "*)
+ # OK
+ ;;
+ *)
+ echo "Unknown CPU given in --with-$which=$val." 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+ *)
+ echo "Unknown CPU given in --with-$which=$val." 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ done
+ ;;
+
+ riscv*-*-*)
+ supported_defaults="abi arch tune riscv_attribute isa_spec"
+
+ case "${target}" in
+ riscv-* | riscv32*) xlen=32 ;;
+ riscv64*) xlen=64 ;;
+ *) echo "Unsupported RISC-V target ${target}" 1>&2; exit 1 ;;
+ esac
+
+ case "${with_isa_spec}" in
+ ""|default|20191213|201912)
+ tm_defines="${tm_defines} TARGET_DEFAULT_ISA_SPEC=ISA_SPEC_CLASS_20191213"
+ with_isa_spec=20191213
+ ;;
+ 2.2)
+ tm_defines="${tm_defines} TARGET_DEFAULT_ISA_SPEC=ISA_SPEC_CLASS_2P2"
+ ;;
+ 20190608 | 201906)
+ tm_defines="${tm_defines} TARGET_DEFAULT_ISA_SPEC=ISA_SPEC_CLASS_20190608"
+ with_isa_spec=20190608
+ ;;
+ *)
+ echo "--with-isa-spec only accept 2.2, 20191213, 201912, 20190608 or 201906" 1>&2
+ exit 1
+ esac
+
+ case "${with_riscv_attribute}" in
+ yes)
+ tm_defines="${tm_defines} TARGET_RISCV_ATTRIBUTE=1"
+ ;;
+ no)
+ tm_defines="${tm_defines} TARGET_RISCV_ATTRIBUTE=0"
+ ;;
+ ""|default)
+ tm_defines="${tm_defines} TARGET_RISCV_ATTRIBUTE=1"
+ ;;
+ *)
+ echo "--with-riscv-attribute=${with_riscv_attribute} is not supported. The argument must begin with yes, no or default." 1>&2
+ exit 1
+ ;;
+ esac
+
+
+ # Infer arch from --with-arch, --target, and --with-abi.
+ case "${with_arch}" in
+ rv32e* | rv32i* | rv32g* | rv64i* | rv64g*)
+ # OK.
+ ;;
+ "")
+ # Infer XLEN, but otherwise assume GC.
+ case "${with_abi}" in
+ ilp32e) with_arch="rv32e" ;;
+ ilp32 | ilp32f | ilp32d) with_arch="rv32gc" ;;
+ lp64 | lp64f | lp64d) with_arch="rv64gc" ;;
+ *) with_arch="rv${xlen}gc" ;;
+ esac
+ ;;
+ *)
+ echo "--with-arch=${with_arch} is not supported. The argument must begin with rv32e, rv32i, rv32g, rv64i, or rv64g." 1>&2
+ exit 1
+ ;;
+ esac
+ PYTHON=`which python || which python3 || which python2`
+ if test "x${PYTHON}" != x; then
+ with_arch=`${PYTHON} ${srcdir}/config/riscv/arch-canonicalize -misa-spec=${with_isa_spec} ${with_arch}`
+ fi
+ tm_defines="${tm_defines} TARGET_RISCV_DEFAULT_ARCH=${with_arch}"
+
+ # Make sure --with-abi is valid. If it was not specified,
+ # pick a default based on the ISA, preferring soft-float
+ # unless the D extension is present.
+ case "${with_abi}" in
+ ilp32 | ilp32e | ilp32f | ilp32d | lp64 | lp64f | lp64d)
+ ;;
+ "")
+ case "${with_arch}" in
+ rv32*d* | rv32g*) with_abi=ilp32d ;;
+ rv32e*) with_abi=ilp32e ;;
+ rv32*) with_abi=ilp32 ;;
+ rv64*d* | rv64g*) with_abi=lp64d ;;
+ rv64*) with_abi=lp64 ;;
+ esac
+ ;;
+ *)
+ echo "--with-abi=${with_abi} is not supported" 1>&2
+ exit 1
+ ;;
+ esac
+ tm_defines="${tm_defines} TARGET_RISCV_DEFAULT_ABI=${with_abi}"
+
+ # Make sure ABI and ISA are compatible.
+ case "${with_abi},${with_arch}" in
+ ilp32,rv32* | ilp32e,rv32e* \
+ | ilp32f,rv32*f* | ilp32f,rv32g* \
+ | ilp32d,rv32*d* | ilp32d,rv32g* \
+ | lp64,rv64* \
+ | lp64f,rv64*f* | lp64f,rv64g* \
+ | lp64d,rv64*d* | lp64d,rv64g*)
+ ;;
+ *)
+ echo "--with-abi=${with_abi} is not supported for ISA ${with_arch}" 1>&2
+ exit 1
+ ;;
+ esac
+ # Handle --with-multilib-generator.
+ if test "x${with_multilib_generator}" != xdefault; then
+ if test "x${with_multilib_list}" != xdefault; then
+ echo "--with-multilib-list= can't used with --with-multilib-generator= at same time" 1>&2
+ exit 1
+ fi
+ case "${target}" in
+ riscv*-*-elf*)
+ if ${srcdir}/config/riscv/multilib-generator \
+ -misa-spec=${with_isa_spec} \
+ `echo ${with_multilib_generator} | sed 's/;/ /g'`\
+ > t-multilib-config;
+ then
+ tmake_file="${tmake_file} riscv/t-withmultilib-generator"
+ else
+ echo "invalid option for --with-multilib-generator" 1>&2
+ exit 1
+ fi
+ ;;
+ *)
+ echo "--with-multilib-generator= is not supported for ${target}, only supported for riscv*-*-elf*" 1>&2
+ exit 1
+ ;;
+ esac
+ fi
+
+ # Handle --with-multilib-list.
+ if test "x${with_multilib_list}" != xdefault; then
+ tmake_file="${tmake_file} riscv/t-withmultilib"
+
+ case ${with_multilib_list} in
+ ilp32 | ilp32f | ilp32d \
+ | lp64 | lp64f | lp64d )
+ TM_MULTILIB_CONFIG="${with_arch},${with_multilib_list}"
+ ;;
+ *)
+ echo "--with-multilib-list=${with_multilib_list} not supported."
+ exit 1
+ esac
+ fi
+ ;;
+
+ mips*-*-*)
+ supported_defaults="abi arch arch_32 arch_64 float fpu nan fp_32 odd_spreg_32 tune tune_32 tune_64 divide llsc mips-plt synci lxc1-sxc1 madd4"
+
+ case ${with_float} in
+ "" | soft | hard)
+ # OK
+ ;;
+ *)
+ echo "Unknown floating point type used in --with-float=$with_float" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case ${with_fpu} in
+ "" | single | double)
+ # OK
+ ;;
+ *)
+ echo "Unknown fpu type used in --with-fpu=$with_fpu" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case ${with_nan} in
+ "" | 2008 | legacy)
+ # OK
+ ;;
+ *)
+ echo "Unknown NaN encoding used in --with-nan=$with_nan" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case ${with_fp_32} in
+ "" | 32 | xx | 64)
+ # OK
+ ;;
+ *)
+ echo "Unknown FP mode used in --with-fp-32=$with_fp_32" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case ${with_odd_spreg_32} in
+ yes)
+ with_odd_spreg_32="odd-spreg"
+ ;;
+ no)
+ with_odd_spreg_32="no-odd-spreg"
+ ;;
+ "")
+ # OK
+ ;;
+ *)
+ echo "Unknown odd-spreg-32 type used in --with-odd-spreg-32=$with_odd_spreg_32" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case ${with_abi} in
+ "" | 32 | o64 | n32 | 64 | eabi)
+ # OK
+ ;;
+ *)
+ echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case ${with_divide} in
+ "" | breaks | traps)
+ # OK
+ ;;
+ *)
+ echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case ${with_llsc} in
+ yes)
+ with_llsc=llsc
+ ;;
+ no)
+ with_llsc="no-llsc"
+ ;;
+ "")
+ # OK
+ ;;
+ *)
+ echo "Unknown llsc type used in --with-llsc" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case ${with_mips_plt} in
+ yes)
+ with_mips_plt=plt
+ ;;
+ no)
+ with_mips_plt=no-plt
+ ;;
+ "")
+ ;;
+ *)
+ echo "Unknown --with-mips-plt argument: $with_mips_plt" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case ${with_synci} in
+ yes)
+ with_synci=synci
+ ;;
+ no)
+ with_synci=no-synci
+ ;;
+ "")
+ ;;
+ *)
+ echo "Unknown synci type used in --with-synci" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case ${with_lxc1_sxc1} in
+ yes)
+ with_lxc1_sxc1=lxc1-sxc1
+ ;;
+ no)
+ with_lxc1_sxc1=no-lxc1-sxc1
+ ;;
+ "")
+ ;;
+ *)
+ echo "Unknown lxc1-sxc1 type used in --with-lxc1-sxc1" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case ${with_madd4} in
+ yes)
+ with_madd4=madd4
+ ;;
+ no)
+ with_madd4=no-madd4
+ ;;
+ "")
+ ;;
+ *)
+ echo "Unknown madd4 type used in --with-madd4" 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+
+ loongarch*-*-*)
+ supported_defaults="abi arch tune fpu"
+
+ # Local variables
+ unset \
+ abi_pattern abi_default \
+ abiext_pattern abiext_default \
+ arch_pattern arch_default \
+ fpu_pattern fpu_default \
+ tune_pattern tune_default \
+ triplet_os triplet_abi
+
+ # Infer ABI from the triplet.
+ case ${target} in
+ loongarch64-*-*-*f64)
+ abi_pattern="lp64d"
+ triplet_abi="f64"
+ ;;
+ loongarch64-*-*-*f32)
+ abi_pattern="lp64f"
+ triplet_abi="f32"
+ ;;
+ loongarch64-*-*-*sf)
+ abi_pattern="lp64s"
+ triplet_abi="sf"
+ ;;
+ loongarch64-*-*-*)
+ abi_pattern="lp64[dfs]"
+ abi_default="lp64d"
+ triplet_abi=""
+ ;;
+ *)
+ echo "Unsupported target ${target}." 1>&2
+ exit 1
+ ;;
+ esac
+
+ abiext_pattern="*"
+ abiext_default="base"
+
+ # Get the canonical triplet (multiarch specifier).
+ case ${target} in
+ *-linux-gnu*) triplet_os="linux-gnu";;
+ *-linux-musl*) triplet_os="linux-musl";;
+ *)
+ echo "Unsupported target ${target}." 1>&2
+ exit 1
+ ;;
+ esac
+
+ la_canonical_triplet="loongarch64-${triplet_os}${triplet_abi}"
+
+
+ # Perform initial sanity checks on --with-* options.
+ case ${with_arch} in
+ "" | loongarch64 | la464) ;; # OK, append here.
+ native)
+ if test x${host} != x${target}; then
+ echo "--with-arch=native is illegal for cross-compiler." 1>&2
+ exit 1
+ fi
+ ;;
+ "")
+ echo "Please set a default value for \${with_arch}" \
+ "according to your target triplet \"${target}\"." 1>&2
+ exit 1
+ ;;
+ *)
+ echo "Unknown arch in --with-arch=$with_arch" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case ${with_abi} in
+ "" | lp64d | lp64f | lp64s) ;; # OK, append here.
+ *)
+ echo "Unsupported ABI given in --with-abi=$with_abi" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case ${with_abiext} in
+ "" | base) ;; # OK, append here.
+ *)
+ echo "Unsupported ABI extention type $with_abiext" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case ${with_fpu} in
+ "" | none | 32 | 64) ;; # OK, append here.
+ 0)
+ # Convert "0" to "none" for upcoming checks.
+ with_fpu="none"
+ ;;
+ *)
+ echo "Unknown fpu type in --with-fpu=$with_fpu" 1>&2
+ exit 1
+ ;;
+ esac
+
+
+ # Set default value for with_abi.
+ case ${with_abi} in
+ "")
+ if test x${abi_default} != x; then
+ with_abi=${abi_default}
+ else
+ with_abi=${abi_pattern}
+ fi
+ ;;
+
+ *)
+ if echo "${with_abi}" | grep -E "^${abi_pattern}$" > /dev/null; then
+ : # OK
+ else
+ echo "Incompatible options:" \
+ "--with-abi=${with_abi} and --target=${target}." 1>&2
+ exit 1
+ fi
+ ;;
+ esac
+
+ # Set default value for with_abiext (internal)
+ case ${with_abiext} in
+ "")
+ if test x${abiext_default} != x; then
+ with_abiext=${abiext_default}
+ else
+ with_abiext=${abiext_pattern}
+ fi
+ ;;
+
+ *)
+ if echo "${with_abiext}" | grep -E "^${abiext_pattern}$" > /dev/null; then
+ : # OK
+ else
+ echo "The ABI extension type \"${with_abiext}\"" \
+ "is incompatible with --target=${target}." 1>&2
+ exit 1
+ fi
+
+ ;;
+ esac
+
+ # Infer ISA-related default options from the ABI: pass 1
+ case ${with_abi}/${with_abiext} in
+ lp64*/base)
+ # architectures that support lp64* ABI
+ arch_pattern="native|loongarch64|la464"
+ # default architecture for lp64* ABI
+ arch_default="loongarch64"
+ ;;
+ *)
+ echo "Unsupported ABI type ${with_abi}/${with_abiext}." 1>&2
+ exit 1
+ ;;
+ esac
+
+ # Infer ISA-related default options from the ABI: pass 2
+ case ${with_abi}/${with_abiext} in
+ lp64d/base)
+ fpu_pattern="64"
+ ;;
+ lp64f/base)
+ fpu_pattern="32|64"
+ fpu_default="32"
+ ;;
+ lp64s/base)
+ fpu_pattern="none|32|64"
+ fpu_default="none"
+ ;;
+ *)
+ echo "Unsupported ABI type ${with_abi}/${with_abiext}." 1>&2
+ exit 1
+ ;;
+ esac
+
+ ## Set default value for with_arch.
+ case ${with_arch} in
+ "")
+ if test x${arch_default} != x; then
+ with_arch=${arch_default}
+ else
+ with_arch=${arch_pattern}
+ fi
+ ;;
+
+ *)
+ if echo "${with_arch}" | grep -E "^${arch_pattern}$" > /dev/null; then
+ : # OK
+ else
+ echo "${with_abi}/${with_abiext} ABI cannot be implemented with" \
+ "--with-arch=${with_arch}." 1>&2
+ exit 1
+ fi
+ ;;
+ esac
+
+ ## Set default value for with_fpu.
+ case ${with_fpu} in
+ "")
+ if test x${fpu_default} != x; then
+ with_fpu=${fpu_default}
+ else
+ with_fpu=${fpu_pattern}
+ fi
+ ;;
+
+ *)
+ if echo "${with_fpu}" | grep -E "^${fpu_pattern}$" > /dev/null; then
+ : # OK
+ else
+ echo "${with_abi}/${with_abiext} ABI cannot be implemented with" \
+ "--with-fpu=${with_fpu}." 1>&2
+ exit 1
+ fi
+ ;;
+ esac
+
+
+ # Infer default with_tune from with_arch: pass 1
+ case ${with_arch} in
+ native)
+ tune_pattern="*"
+ tune_default="native"
+ ;;
+ loongarch64)
+ tune_pattern="loongarch64|la464"
+ tune_default="la464"
+ ;;
+ *)
+ # By default, $with_tune == $with_arch
+ tune_pattern="$with_arch"
+ ;;
+ esac
+
+ ## Set default value for with_tune.
+ case ${with_tune} in
+ "")
+ if test x${tune_default} != x; then
+ with_tune=${tune_default}
+ else
+ with_tune=${tune_pattern}
+ fi
+ ;;
+
+ *)
+ if echo "${with_tune}" | grep -E "^${tune_pattern}$" > /dev/null; then
+ : # OK
+ else
+ echo "Incompatible options: --with-tune=${with_tune}" \
+ "and --with-arch=${with_arch}." 1>&2
+ exit 1
+ fi
+ ;;
+ esac
+
+ # Handle --with-multilib-list.
+ if test x"${with_multilib_list}" = x \
+ || test x"${with_multilib_list}" = xno \
+ || test x"${with_multilib_list}" = xdefault \
+ || test x"${enable_multilib}" != xyes; then
+
+ with_multilib_list="${with_abi}/${with_abiext}"
+ fi
+
+ # Check if the configured default ABI combination is included in
+ # ${with_multilib_list}.
+ loongarch_multilib_list_sane=no
+
+ # This one goes to TM_MULTILIB_CONFIG, for use in t-linux.
+ loongarch_multilib_list_make=""
+
+ # This one goes to tm_defines, for use in loongarch-driver.c.
+ loongarch_multilib_list_c=""
+
+ # ${with_multilib_list} should not contain whitespaces,
+ # consecutive commas or slashes.
+ if echo "${with_multilib_list}" \
+ | grep -E -e "[[:space:]]" -e '[,/][,/]' -e '[,/]$' -e '^[,/]' > /dev/null; then
+ echo "Invalid argument to --with-multilib-list." 1>&2
+ exit 1
+ fi
+
+ unset component idx elem_abi_base elem_abi_ext elem_tmp
+ for elem in $(echo "${with_multilib_list}" | tr ',' ' '); do
+ idx=0
+ while true; do
+ idx=$((idx + 1))
+ component=$(echo "${elem}" | awk -F'/' '{print $'"${idx}"'}')
+
+ case ${idx} in
+ 1)
+ # Component 1: Base ABI type
+ case ${component} in
+ lp64d) elem_tmp="ABI_BASE_LP64D,";;
+ lp64f) elem_tmp="ABI_BASE_LP64F,";;
+ lp64s) elem_tmp="ABI_BASE_LP64S,";;
+ *)
+ echo "Unknown base ABI \"${component}\" in --with-multilib-list." 1>&2
+ exit 1
+ ;;
+ esac
+ loongarch_multilib_list_c="${loongarch_multilib_list_c}${elem_tmp}"
+ loongarch_multilib_list_make="${loongarch_multilib_list_make}mabi=${component}"
+ elem_abi_base="${component}"
+ ;;
+
+ 2)
+ # Component 2: ABI extension type
+ case ${component} in
+ "" | base)
+ component="base"
+ elem_tmp="ABI_EXT_BASE,"
+ ;;
+ *)
+ echo "Unknown ABI extension \"${component}\" in --with-multilib-list." 1>&2
+ exit 1
+ ;;
+ esac
+ loongarch_multilib_list_c="${loongarch_multilib_list_c}${elem_tmp}"
+ loongarch_multilib_list_make="${loongarch_multilib_list_make}" # Add nothing for now.
+ elem_abi_ext="${component}"
+ ;;
+
+ *)
+ # Component 3 and on: optional stuff
+ case ${component} in
+ "")
+ # End of component list.
+ break
+ ;;
+ *)
+ echo "Unknown ABI \"${elem}\" in --with-multilib-list." 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+ esac
+ done
+
+ if test x${elem_abi_base} = x${with_abi} \
+ && test x${elem_abi_ext} = x${with_abiext}; then
+ loongarch_multilib_list_sane=yes
+ fi
+ loongarch_multilib_list_make="${loongarch_multilib_list_make},"
+ done
+
+ # Check if the default ABI combination is in the default list.
+ if test x${loongarch_multilib_list_sane} = xno; then
+ if test x${with_abiext} = xbase; then
+ with_abiext=""
+ else
+ with_abiext="/${with_abiext}"
+ fi
+
+ echo "Default ABI combination (${with_abi}${with_abiext})" \
+ "not found in --with-multilib-list." 1>&2
+ exit 1
+ fi
+
+ # Remove the excessive appending comma.
+ loongarch_multilib_list_c=${loongarch_multilib_list_c%,}
+ loongarch_multilib_list_make=${loongarch_multilib_list_make%,}
+ ;;
+
+ nds32*-*-*)
+ supported_defaults="arch cpu nds32_lib float fpu_config"
+
+ # process --with-arch
+ case "${with_arch}" in
+ "" | v3 )
+ tm_defines="${tm_defines} TARGET_ARCH_DEFAULT=0"
+ ;;
+ v2 | v2j | v3m)
+ # OK
+ tm_defines="${tm_defines} TARGET_ARCH_DEFAULT=0"
+ ;;
+ v3f)
+ tm_defines="${tm_defines} TARGET_ARCH_DEFAULT=1"
+ ;;
+ v3s)
+ tm_defines="${tm_defines} TARGET_ARCH_DEFAULT=2"
+
+ ;;
+ *)
+ echo "Cannot accept --with-arch=$with_arch, available values are: v2 v2j v3 v3m v3f v3s" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case "${with_cpu}" in
+ "")
+ with_cpu=n9
+ ;;
+ n6 | n7 |n8 | e8 | s8 | n9 | n10 | d10 | n12 | n13 | n15)
+ # OK
+ ;;
+ *)
+ echo "Cannot accept --with-cpu=$with_cpu, available values are: n6 n7 n8 e8 s8 n9 n10 d10 n12 n13 n15" 1>&2
+ exit 1
+ ;;
+ esac
+
+ # process --with-nds32-lib
+ case "${with_nds32_lib}" in
+ "")
+ case ${target} in
+ *-*-*uclibc*)
+ with_nds32_lib=ulibc
+ ;;
+ *-*-linux*)
+ with_nds32_lib=glibc
+ ;;
+ *)
+ with_nds32_lib=newlib
+ tm_defines="${tm_defines} TARGET_DEFAULT_CTOR_DTOR=1"
+ ;;
+ esac
+ ;;
+ newlib)
+ # OK
+ tm_defines="${tm_defines} TARGET_DEFAULT_CTOR_DTOR=1"
+ ;;
+ mculib)
+ # OK
+ # for the arch=v3f or arch=v3s under mculib toolchain,
+ # we would like to set -fno-math-errno as default
+ case "${with_arch}" in
+ v3f | v3s)
+ tm_defines="${tm_defines} TARGET_DEFAULT_NO_MATH_ERRNO=1"
+ ;;
+ esac
+ ;;
+ glibc | uclibc)
+ # OK
+ ;;
+ *)
+ echo "Cannot accept --with-nds32-lib=$with_nds32_lib, available values are: newlib mculib glibc uclibc" 1>&2
+ exit 1
+ ;;
+ esac
+
+ # process --with-float
+ case "${with_float}" in
+ "" | soft | hard)
+ # OK
+ ;;
+ *)
+ echo "Cannot accept --with-float=$with_float, available values are: soft hard" 1>&2
+ exit 1
+ ;;
+ esac
+
+ # process --with-config-fpu
+ case "${with_config_fpu}" in
+ "" | 0 | 1 | 2 | 3)
+ # OK
+ ;;
+ *)
+ echo "Cannot accept --with-config-fpu=$with_config_fpu, available values from 0 to 7" 1>&2
+ exit 1
+ ;;
+ esac
+
+
+ ;;
+ nios2*-*-*)
+ supported_defaults="arch"
+ case "$with_arch" in
+ "" | r1 | r2)
+ # OK
+ ;;
+ *)
+ echo "Unknown arch used in --with-arch=$with_arch" 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+
+ powerpc*-*-* | rs6000-*-*)
+ supported_defaults="abi cpu cpu_32 cpu_64 float tune tune_32 tune_64 advance_toolchain"
+
+ for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do
+ eval "val=\$with_$which"
+ case ${val} in
+ default32 | default64)
+ case $which in
+ cpu | tune)
+ ;;
+ *)
+ echo "$val only valid for --with-cpu and --with-tune." 1>&2
+ exit 1
+ ;;
+ esac
+ with_which="with_$which"
+ eval $with_which=
+ ;;
+ 405cr)
+ tm_defines="${tm_defines} CONFIG_PPC405CR"
+ eval "with_$which=405"
+ ;;
+ "" | common | native \
+ | power[3456789] | power10 | power5+ | power6x \
+ | powerpc | powerpc64 | powerpc64le \
+ | rs64 \
+ | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \
+ | 476 | 476fp | 505 | 601 | 602 | 603 | 603e | ec603e \
+ | 604 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
+ | a2 | e300c[23] | 854[08] | e500mc | e500mc64 | e5500 | e6500 \
+ | titan | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell)
+ # OK
+ ;;
+ *)
+ echo "Unknown cpu used in --with-$which=$val." 1>&2
+ exit 1
+ ;;
+ esac
+ done
+
+ case "$with_abi" in
+ "" | elfv1 | elfv2 )
+ #OK
+ ;;
+ *)
+ echo "Unknown ABI used in --with-abi=$with_abi"
+ exit 1
+ ;;
+ esac
+
+ if test "x$with_advance_toolchain" != x; then
+ if test -d "/opt/$with_advance_toolchain/." -a \
+ -d "/opt/$with_advance_toolchain/bin/." -a \
+ -d "/opt/$with_advance_toolchain/include/."; then
+
+ tm_file="$tm_file ./advance-toolchain.h"
+ (at="/opt/$with_advance_toolchain"
+ echo "/* Use Advance Toolchain $at */"
+ echo
+ echo "#undef LINK_OS_NEW_DTAGS_SPEC"
+ echo "#define LINK_OS_NEW_DTAGS_SPEC" \
+ "\"--enable-new-dtags\""
+ echo
+ echo "#undef DYNAMIC_LINKER_PREFIX"
+ echo "#define DYNAMIC_LINKER_PREFIX \"$at\""
+ echo
+ echo "#undef MD_EXEC_PREFIX"
+ echo "#define MD_EXEC_PREFIX \"$at/bin/\""
+ echo
+ echo "#undef MD_STARTFILE_PREFIX"
+ echo "#define MD_STARTFILE_PREFIX \"$prefix/lib/\""
+ echo
+ echo "#undef MD_STARTFILE_PREFIX_1"
+ echo "#define MD_STARTFILE_PREFIX_1 \"$at/lib/\"") \
+ > advance-toolchain.h
+ else
+ echo "Unknown advance-toolchain $with_advance_toolchain"
+ exit 1
+ fi
+ fi
+
+ # Set up the default long double format if the user changed it.
+ if test x$with_long_double_format = xieee; then
+ tm_defines="${tm_defines} TARGET_IEEEQUAD_DEFAULT=1"
+
+ elif test x$with_long_double_format = xibm; then
+ tm_defines="${tm_defines} TARGET_IEEEQUAD_DEFAULT=0"
+ fi
+ ;;
+
+ s390*-*-*)
+ supported_defaults="arch mode tune"
+
+ for which in arch tune; do
+ eval "val=\$with_$which"
+ case ${val} in
+ "" | native | z900 | z990 | z9-109 | z9-ec | z10 | z196 | zEC12 | z13 | z14 | z15 | z16 | arch5 | arch6 | arch7 | arch8 | arch9 | arch10 | arch11 | arch12 | arch13 | arch14 )
+ # OK
+ ;;
+ *)
+ echo "Unknown cpu used in --with-$which=$val." 1>&2
+ exit 1
+ ;;
+ esac
+ done
+
+ case ${with_mode} in
+ "" | esa | zarch)
+ # OK
+ ;;
+ *)
+ echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+
+ sh[123456ble]*-*-* | sh-*-*)
+ supported_defaults="cpu"
+ case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
+ "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
+ # OK
+ ;;
+ m2a | m2a-single | m2a-single-only | m2a-nofpu)
+ ;;
+ m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
+ ;;
+ *)
+ echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
+ echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
+ echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
+ echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+ sparc*-*-*)
+ supported_defaults="cpu cpu_32 cpu_64 float tune tune_32 tune_64"
+
+ for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do
+ eval "val=\$with_$which"
+ case ${val} in
+ "" | sparc | sparcv9 | sparc64 \
+ | v7 | cypress \
+ | v8 | supersparc | hypersparc | leon | leon3 | leon3v7 \
+ | sparclite | f930 | f934 | sparclite86x \
+ | sparclet | tsc701 \
+ | v9 | ultrasparc | ultrasparc3 | niagara | niagara2 \
+ | niagara3 | niagara4 | niagara7 | m8)
+ # OK
+ ;;
+ *)
+ echo "Unknown cpu used in --with-$which=$val" 1>&2
+ exit 1
+ ;;
+ esac
+ done
+
+ case ${with_float} in
+ "" | soft | hard)
+ # OK
+ ;;
+ *)
+ echo "Unknown floating point type used in --with-float=$with_float" 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+
+ tic6x-*-*)
+ supported_defaults="arch"
+
+ case ${with_arch} in
+ "" | c62x | c64x | c64x+ | c67x | c67x+ | c674x)
+ # OK
+ ;;
+ *)
+ echo "Unknown arch used in --with-arch=$with_arch." 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+
+ v850*-*-*)
+ supported_defaults=cpu
+ case ${with_cpu} in
+ "" | v850e | v850e1 | v850e2 | v850es | v850e2v3 | v850e3v5)
+ # OK
+ ;;
+ *)
+ echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+ visium-*-*)
+ supported_defaults="cpu"
+ case $with_cpu in
+ "" | gr5 | gr6)
+ ;;
+ *) echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+esac
+
+# Targets for which there is at least one VxWorks port should include
+# vxworks-dummy.h to allow safe references to various TARGET_VXWORKS kinds
+# of markers from other files in the port, including the vxworks*.h files to
+# distinguish VxWorks variants such as VxWorks 7 or 64).
+
+case ${target} in
+arm*-*-* | i[34567]86-*-* | mips*-*-* | powerpc*-*-* | sh*-*-* \
+| sparc*-*-* | x86_64-*-*)
+ tm_file="vxworks-dummy.h ${tm_file}"
+ ;;
+esac
+
+# Set some miscellaneous flags for particular targets.
+target_cpu_default2=
+case ${target} in
+ aarch64*-*-*)
+ if test x"$target_cpu_cname" != x
+ then
+ target_cpu_default2=$target_cpu_cname
+ fi
+ ;;
+
+ arm*-*-*)
+ if test x$with_cpu = x
+ then
+ echo "Don't know the target cpu" 1>&2
+ exit 1
+ else
+ target_cpu_default2="\\\"$with_cpu\\\""
+ fi
+ ;;
+
+ hppa*-*-*)
+ if test x$gas = xyes
+ then
+ target_cpu_default2="MASK_GAS"
+ fi
+ ;;
+
+ fido*-*-* | m68k*-*-*)
+ target_cpu_default2=$m68k_cpu_ident
+ tmake_file="m68k/t-opts $tmake_file"
+ if [ x"$m68k_arch_family" != x ]; then
+ tmake_file="m68k/t-$m68k_arch_family $tmake_file"
+ fi
+ ;;
+
+ i[34567]86-*-darwin* | x86_64-*-darwin*)
+ ;;
+ i[34567]86-*-linux* | x86_64-*-linux*)
+ extra_objs="${extra_objs} gnu-property.o"
+ tmake_file="$tmake_file i386/t-linux i386/t-gnu-property"
+ ;;
+ i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu)
+ tmake_file="$tmake_file i386/t-kfreebsd"
+ ;;
+ i[34567]86-*-gnu*)
+ tmake_file="$tmake_file i386/t-gnu"
+ ;;
+ i[34567]86-*-msdosdjgpp*)
+ tmake_file="${tmake_file} i386/t-djgpp"
+ ;;
+ i[34567]86-*-solaris2* | x86_64-*-solaris2*)
+ ;;
+ i[34567]86-*-cygwin* | x86_64-*-cygwin*)
+ ;;
+ i[34567]86-*-mingw* | x86_64-*-mingw*)
+ ;;
+ i[34567]86-*-dragonfly* | x86_64-*-dragonfly*)
+ ;;
+ i[34567]86-*-freebsd*)
+ ;;
+ x86_64-*-freebsd*)
+ tmake_file="${tmake_file} i386/t-freebsd64"
+ ;;
+ ia64*-*-linux*)
+ ;;
+
+ mips*-*-*)
+ if test x$gnu_ld = xyes
+ then
+ target_cpu_default2="MASK_SPLIT_ADDRESSES"
+ fi
+ case ${target} in
+ mips*el-*-*)
+ tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
+ ;;
+ esac
+ if test x$with_arch != x; then
+ default_mips_arch=$with_arch
+ fi
+ if test x$with_abi != x; then
+ default_mips_abi=$with_abi
+ fi
+ case ${default_mips_arch} in
+ mips1) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS1" ;;
+ mips2) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS2" ;;
+ mips3) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS3" ;;
+ mips4) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS4" ;;
+ mips32) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32" ;;
+ mips32r2) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2" ;;
+ mips32r6) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6" ;;
+ mips64) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64" ;;
+ mips64r2) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R2" ;;
+ mips64r6) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R6" ;;
+ esac
+ case ${default_mips_abi} in
+ 32) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_32" ;;
+ o64) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_O64" ;;
+ n32) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_N32" ;;
+ 64) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_64" ;;
+ eabi) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_EABI" ;;
+ esac
+ tmake_file="mips/t-mips $tmake_file"
+ ;;
+
+ loongarch*-*-*)
+ # Export canonical triplet.
+ tm_defines="${tm_defines} LA_MULTIARCH_TRIPLET=${la_canonical_triplet}"
+
+ # Define macro LA_DISABLE_MULTILIB if --disable-multilib
+ tm_defines="${tm_defines} TM_MULTILIB_LIST=${loongarch_multilib_list_c}"
+ if test x$enable_multilib = xyes; then
+ TM_MULTILIB_CONFIG="${loongarch_multilib_list_make}"
+ else
+ tm_defines="${tm_defines} LA_DISABLE_MULTILIB"
+ fi
+
+ # Let --with- flags initialize the enum variables from loongarch.opt.
+ # See macro definitions from loongarch-opts.h and loongarch-cpu.h.
+ case ${with_arch} in
+ native) tm_defines="${tm_defines} DEFAULT_CPU_ARCH=CPU_NATIVE" ;;
+ la464) tm_defines="${tm_defines} DEFAULT_CPU_ARCH=CPU_LA464" ;;
+ loongarch64) tm_defines="${tm_defines} DEFAULT_CPU_ARCH=CPU_LOONGARCH64" ;;
+ esac
+
+ case ${with_tune} in
+ native) tm_defines="${tm_defines} DEFAULT_CPU_TUNE=CPU_NATIVE" ;;
+ la464) tm_defines="${tm_defines} DEFAULT_CPU_TUNE=CPU_LA464" ;;
+ loongarch64) tm_defines="${tm_defines} DEFAULT_CPU_TUNE=CPU_LOONGARCH64" ;;
+ esac
+
+ case ${with_abi} in
+ lp64d) tm_defines="${tm_defines} DEFAULT_ABI_BASE=ABI_BASE_LP64D" ;;
+ lp64f) tm_defines="${tm_defines} DEFAULT_ABI_BASE=ABI_BASE_LP64F" ;;
+ lp64s) tm_defines="${tm_defines} DEFAULT_ABI_BASE=ABI_BASE_LP64S" ;;
+ esac
+
+ case ${with_abiext} in
+ base) tm_defines="${tm_defines} DEFAULT_ABI_EXT=ABI_EXT_BASE" ;;
+ esac
+
+ case ${with_fpu} in
+ none) tm_defines="$tm_defines DEFAULT_ISA_EXT_FPU=ISA_EXT_NOFPU" ;;
+ 32) tm_defines="$tm_defines DEFAULT_ISA_EXT_FPU=ISA_EXT_FPU32" ;;
+ 64) tm_defines="$tm_defines DEFAULT_ISA_EXT_FPU=ISA_EXT_FPU64" ;;
+ esac
+
+ tmake_file="loongarch/t-loongarch $tmake_file"
+ ;;
+
+ powerpc*-*-* | rs6000-*-*)
+ # FIXME: The PowerPC port uses the value set at compile time,
+ # although it's only cosmetic.
+ if test "x$with_cpu" != x
+ then
+ target_cpu_default2="\\\"$with_cpu\\\""
+ fi
+ out_file="${cpu_type}/${cpu_type}.cc"
+ c_target_objs="${c_target_objs} ${cpu_type}-c.o"
+ cxx_target_objs="${cxx_target_objs} ${cpu_type}-c.o"
+ d_target_objs="${d_target_objs} ${cpu_type}-d.o"
+ tmake_file="${cpu_type}/t-${cpu_type} ${tmake_file}"
+ ;;
+
+ sh[123456ble]*-*-* | sh-*-*)
+ c_target_objs="${c_target_objs} sh-c.o"
+ cxx_target_objs="${cxx_target_objs} sh-c.o"
+ ;;
+
+ sparc*-*-*)
+ # Some standard aliases.
+ case x$with_cpu in
+ xsparc)
+ with_cpu=v7
+ ;;
+ xsparcv9 | xsparc64)
+ with_cpu=v9
+ ;;
+ esac
+
+ if test x$with_tune = x ; then
+ case ${target} in
+ *-leon-*)
+ with_tune=leon
+ ;;
+ *-leon[3-9]*)
+ with_tune=leon3
+ ;;
+ esac
+ fi
+
+ # The SPARC port checks this value at compile-time.
+ target_cpu_default2="TARGET_CPU_$with_cpu"
+ ;;
+
+ v850*-*-*)
+ case "x$with_cpu" in
+ x)
+ ;;
+ xv850e | xv850e1 | xv850e2 | xv850e2v3 | xv850e3v5)
+ target_cpu_default2="TARGET_CPU_$with_cpu"
+ ;;
+ xv850es)
+ target_cpu_default2="TARGET_CPU_v850e1"
+ ;;
+ esac
+ ;;
+ visium-*-*)
+ target_cpu_default2="TARGET_CPU_$with_cpu"
+ ;;
+esac
+
+t=
+all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu nan fp_32 odd_spreg_32 divide llsc mips-plt synci tls lxc1-sxc1 madd4 isa_spec"
+for option in $all_defaults
+do
+ eval "val=\$with_"`echo $option | sed s/-/_/g`
+ if test -n "$val"; then
+ case " $supported_defaults " in
+ *" $option "*)
+ ;;
+ *)
+ echo "This target does not support --with-$option." 2>&1
+ echo "Valid --with options are: $supported_defaults" 2>&1
+ exit 1
+ ;;
+ esac
+
+ if test "x$t" = x
+ then
+ t="{ \"$option\", \"$val\" }"
+ else
+ t="${t}, { \"$option\", \"$val\" }"
+ fi
+ fi
+done
+
+if test "x$t" = x
+then
+ configure_default_options="{ { NULL, NULL} }"
+else
+ configure_default_options="{ ${t} }"
+fi
+
+if test "$target_cpu_default2" != ""
+then
+ if test "$target_cpu_default" != ""
+ then
+ target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
+ else
+ target_cpu_default=$target_cpu_default2
+ fi
+fi
+
+case ${target} in
+i[34567]86-*-* | x86_64-*-*)
+ if test x$enable_as_accelerator = xyes; then
+ extra_programs="mkoffload\$(exeext)"
+ fi
+ ;;
+esac
Index: gcc/configure
===================================================================
--- gcc/configure (nonexistent)
+++ gcc/configure (revision 5)
@@ -0,0 +1,34263 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+ # into an infinite loop, continuously re-executing ourselves.
+ if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+ _as_can_reexec=no; export _as_can_reexec;
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+ fi
+ # We don't want this to propagate to other subprocesses.
+ { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1
+
+ test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ as_found=:
+ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
+ done;;
+ esac
+ as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+ if test "x$CONFIG_SHELL" != x; then :
+ export CONFIG_SHELL
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+ fi
+ exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+ # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+ # already done that, so ensure we don't try to do so again and fall
+ # in an infinite loop. This has already happened in practice.
+ _as_can_reexec=no; export _as_can_reexec
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -pR'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -pR'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -pR'
+ fi
+else
+ as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME=
+PACKAGE_TARNAME=
+PACKAGE_VERSION=
+PACKAGE_STRING=
+PACKAGE_BUGREPORT=
+PACKAGE_URL=
+
+ac_unique_file="tree.cc"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='LTLIBOBJS
+LIBOBJS
+CET_HOST_FLAGS
+NO_PIE_FLAG
+NO_PIE_CFLAGS
+enable_default_pie
+PICFLAG
+enable_host_shared
+enable_plugin
+pluginlibs
+ISLINC
+ISLLIBS
+GMPINC
+GMPLIBS
+target_cpu_default
+d_target_objs
+fortran_target_objs
+cxx_target_objs
+c_target_objs
+use_gcc_stdint
+xm_defines
+xm_include_list
+xm_file_list
+tm_d_include_list
+tm_d_file_list
+tm_p_include_list
+tm_p_file_list
+tm_defines
+tm_include_list
+tm_file_list
+common_out_object_file
+common_out_file
+out_object_file
+out_file
+objc_boehm_gc
+md_file
+local_prefix
+lang_tree_files
+lang_specs_files
+lang_opt_files
+install
+out_host_hook_obj
+host_xm_defines
+host_xm_include_list
+host_xm_file_list
+host_exeext
+gcc_gxx_libcxx_include_dir_add_sysroot
+gcc_gxx_libcxx_include_dir
+gcc_gxx_include_dir_add_sysroot
+gcc_gxx_include_dir
+gcc_config_arguments
+float_h_file
+extra_programs
+extra_objs
+extra_headers_list
+user_headers_inc_next_post
+user_headers_inc_next_pre
+extra_gcc_objs
+TM_MULTILIB_EXCEPTIONS_CONFIG
+TM_MULTILIB_CONFIG
+TM_ENDIAN_CONFIG
+tmake_file
+xmake_file
+cpp_install_dir
+selftest_languages
+check_languages
+build_file_translate
+build_xm_defines
+build_xm_include_list
+build_xm_file_list
+build_install_headers_dir
+build_exeext
+all_selected_languages
+all_languages
+all_lang_makefrags
+all_lang_configurefrags
+all_gtfiles
+all_compilers
+srcdir
+subdirs
+dollar
+gcc_tooldir
+enable_lto
+DO_LINK_SERIALIZATION
+DO_LINK_MUTEX
+CSCOPE
+ETAGS
+CTAGS
+MAINT
+zlibinc
+zlibdir
+HOST_LIBS
+enable_default_ssp
+thin_archive_support
+ld_soname_option
+ld_version_script_option
+libgcc_visibility
+ORIGINAL_DSYMUTIL_FOR_TARGET
+gcc_cv_dsymutil
+gcc_cv_otool
+gcc_cv_readelf
+gcc_cv_objdump
+ORIGINAL_NM_FOR_TARGET
+gcc_cv_nm
+ORIGINAL_LD_GOLD_FOR_TARGET
+ORIGINAL_LD_BFD_FOR_TARGET
+ORIGINAL_LD_FOR_TARGET
+ORIGINAL_PLUGIN_LD_FOR_TARGET
+gcc_cv_ld
+ORIGINAL_AS_FOR_TARGET
+gcc_cv_as
+enable_fast_install
+objdir
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+STRIP
+OBJDUMP
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+SED
+LIBTOOL
+collect2
+STMP_FIXINC
+BUILD_LDFLAGS
+BUILD_CXXFLAGS
+BUILD_CFLAGS
+CXX_FOR_BUILD
+CC_FOR_BUILD
+inhibit_libc
+BUILD_SYSTEM_HEADER_DIR
+SYSTEM_HEADER_DIR
+ALL
+CROSS
+CATOBJEXT
+GENCAT
+INSTOBJEXT
+DATADIRNAME
+CATALOGS
+POSUB
+GMSGFMT
+XGETTEXT
+INCINTL
+LIBINTL_DEP
+LIBINTL
+USE_NLS
+get_gcc_base_ver
+HAVE_AUTO_BUILD
+extra_opt_files
+extra_modes_file
+NATIVE_SYSTEM_HEADER_DIR
+objext
+manext
+LIBICONV_DEP
+LTLIBICONV
+LIBICONV
+ZSTD_LDFLAGS
+ZSTD_CPPFLAGS
+ZSTD_LIB
+ZSTD_INCLUDE
+DL_LIB
+LDEXP_LIB
+NETLIBS
+EXTRA_GCC_LIBS
+GNAT_LIBEXC
+COLLECT2_LIBS
+CXXDEPMODE
+DEPDIR
+am__leading_dot
+doc_build_sys
+AR
+NM
+BISON
+FLEX
+GENERATED_MANPAGES
+BUILD_INFO
+MAKEINFO
+have_mktemp_command
+make_compare_target
+INSTALL_DATA
+INSTALL_PROGRAM
+INSTALL
+ranlib_flags
+RANLIB
+LN
+LN_S
+AWK
+SET_MAKE
+omp_device_property_deps
+omp_device_properties
+accel_dir_suffix
+real_target_noncanonical
+enable_as_accelerator
+gnat_install_lib
+REPORT_BUGS_TEXI
+REPORT_BUGS_TO
+PKGVERSION
+CONFIGURE_SPECS
+enable_gcov
+enable_shared
+enable_fixed_point
+enable_decimal_float
+with_float
+with_cpu
+enable_multiarch
+enable_multilib
+coverage_flags
+valgrind_command
+valgrind_path_defines
+valgrind_path
+TREECHECKING
+nocommon_flag
+noexception_flags
+warn_cxxflags
+warn_cflags
+c_strict_warn
+strict_warn
+c_loose_warn
+loose_warn
+aliasing_flags
+CPP
+EGREP
+GREP
+CXXCPP
+PICFLAG_FOR_TARGET
+GDCFLAGS
+GDC
+GNATMAKE
+GNATBIND
+ac_ct_CXX
+CXXFLAGS
+CXX
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+GENINSRC
+CROSS_SYSTEM_HEADER_DIR
+TARGET_SYSTEM_ROOT_DEFINE
+TARGET_SYSTEM_ROOT
+SYSROOT_CFLAGS_FOR_TARGET
+target_subdir
+host_subdir
+build_subdir
+build_libsubdir
+target_noncanonical
+host_noncanonical
+target_os
+target_vendor
+target_cpu
+target
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files='option_includes
+language_hooks'
+ac_user_opts='
+enable_option_checking
+with_build_libsubdir
+with_local_prefix
+with_native_system_header_dir
+with_build_sysroot
+with_sysroot
+with_gxx_include_dir
+with_gxx_libcxx_include_dir
+with_cpp_install_dir
+enable_generated_files_in_srcdir
+with_gnu_ld
+with_ld
+with_demangler_in_ld
+with_dsymutil
+with_gnu_as
+with_as
+enable_largefile
+enable_build_format_warnings
+enable_werror_always
+enable_checking
+enable_coverage
+enable_gather_detailed_mem_stats
+enable_valgrind_annotations
+enable_multilib
+enable_multiarch
+with_stack_clash_protection_guard_size
+enable___cxa_atexit
+enable_decimal_float
+enable_fixed_point
+enable_threads
+enable_tls
+enable_vtable_verify
+enable_analyzer
+enable_objc_gc
+with_dwarf2
+enable_shared
+enable_gcov
+with_specs
+with_pkgversion
+with_bugurl
+with_documentation_root_url
+with_changes_root_url
+enable_languages
+with_multilib_list
+with_multilib_generator
+with_zstd
+with_zstd_include
+with_zstd_lib
+enable_rpath
+with_libiconv_prefix
+with_libiconv_type
+enable_sjlj_exceptions
+with_gcc_major_version_only
+enable_secureplt
+enable_mingw_wildcard
+enable_large_address_aware
+enable_leading_mingw64_underscores
+enable_cld
+enable_frame_pointer
+enable_win32_registry
+enable_static
+with_pic
+enable_fast_install
+enable_libtool_lock
+enable_ld
+enable_gold
+with_plugin_ld
+enable_gnu_indirect_function
+enable_initfini_array
+enable_comdat
+enable_newlib_nano_formatted_io
+enable_standard_branch_protection
+enable_fix_cortex_a53_835769
+enable_fix_cortex_a53_843419
+with_glibc_version
+enable_gnu_unique_object
+enable_linker_build_id
+enable_libssp
+enable_default_ssp
+with_long_double_128
+with_long_double_format
+with_gc
+with_system_zlib
+enable_maintainer_mode
+enable_link_mutex
+enable_link_serialization
+enable_version_specific_runtime_libs
+enable_plugin
+enable_host_shared
+enable_libquadmath_support
+with_linker_hash_style
+with_diagnostics_color
+with_diagnostics_urls
+enable_default_pie
+enable_cet
+enable_s390_excess_float_precision
+'
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CXX
+CXXFLAGS
+CCC
+CXXCPP
+CPP
+GMPLIBS
+GMPINC
+ISLLIBS
+ISLINC'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *=) ac_optarg= ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures this package to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking ...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+ --target=TARGET configure for building compilers for TARGET [HOST]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-generated-files-in-srcdir
+ put copies of generated files in source dir intended
+ for creating source tarballs for users without
+ texinfo bison or flex
+ --disable-largefile omit support for large files
+ --disable-build-format-warnings
+ don't use -Wformat while building GCC
+ --enable-werror-always enable -Werror despite compiler version
+ --enable-checking[=LIST]
+ enable expensive run-time checks. With LIST, enable
+ only specific categories of checks. Categories are:
+ yes,no,all,none,release. Flags are:
+ assert,df,extra,fold,gc,gcac,gimple,misc,
+ rtlflag,rtl,runtime,tree,valgrind,types
+ --enable-coverage[=LEVEL]
+ enable compiler's code coverage collection. Use to
+ measure compiler performance and locate unused parts
+ of the compiler. With LEVEL, specify optimization.
+ Values are opt, noopt, default is noopt
+ --enable-gather-detailed-mem-stats
+ enable detailed memory allocation stats gathering
+ --enable-valgrind-annotations
+ enable valgrind runtime interaction
+ --enable-multilib enable library support for multiple ABIs
+ --enable-multiarch enable support for multiarch paths
+ --enable-__cxa_atexit enable __cxa_atexit for C++
+ --enable-decimal-float={no,yes,bid,dpd}
+ enable decimal float extension to C. Selecting 'bid'
+ or 'dpd' choses which decimal floating point format
+ to use
+ --enable-fixed-point enable fixed-point arithmetic extension to C
+ --enable-threads[=LIB] enable thread usage for target GCC, using LIB thread
+ package
+ --enable-tls enable or disable generation of tls code overriding
+ the assembler check for tls support
+ --enable-vtable-verify enable vtable verification feature
+ --disable-analyzer disable -fanalyzer static analyzer
+ --enable-objc-gc enable the use of Boehm's garbage collector with the
+ GNU Objective-C runtime
+ --disable-shared don't provide a shared libgcc
+ --disable-gcov don't provide libgcov and related host tools
+ --enable-languages=LIST specify which front-ends to build
+ --disable-rpath do not hardcode runtime library paths
+ --enable-sjlj-exceptions
+ arrange to use setjmp/longjmp exception handling
+ --enable-secureplt enable -msecure-plt by default for PowerPC
+ --enable-mingw-wildcard Set whether to expand wildcard on command-line.
+ Default to platform configuration
+ --enable-large-address-aware
+ Link mingw executables with --large-address-aware
+ --enable-leading-mingw64-underscores
+ enable leading underscores on 64 bit mingw targets
+ --enable-cld enable -mcld by default for 32bit x86
+ --enable-frame-pointer enable -fno-omit-frame-pointer by default for x86
+ --disable-win32-registry
+ disable lookup of installation paths in the Registry
+ on Windows hosts
+ --enable-win32-registry enable registry lookup (default)
+ --enable-win32-registry=KEY
+ use KEY instead of GCC version as the last portion
+ of the registry key
+ --enable-shared[=PKGS] build shared libraries [default=yes]
+ --enable-static[=PKGS] build static libraries [default=yes]
+ --enable-fast-install[=PKGS]
+ optimize for fast installation [default=yes]
+ --disable-libtool-lock avoid locking (might break parallel builds)
+ --enable-ld[=ARG] build ld [ARG={default,yes,no}]
+ --enable-gold[=ARG] build gold [ARG={default,yes,no}]
+ --enable-gnu-indirect-function
+ enable the use of the @gnu_indirect_function to
+ glibc systems
+ --enable-initfini-array use .init_array/.fini_array sections
+ --enable-comdat enable COMDAT group support
+ --enable-newlib-nano-formatted-io
+ Use nano version formatted IO
+
+ --enable-standard-branch-protection
+ enable Branch Target Identification Mechanism and
+ Return Address Signing by default for AArch64
+ --disable-standard-branch-protection
+ disable Branch Target Identification Mechanism and
+ Return Address Signing by default for AArch64
+
+
+ --enable-fix-cortex-a53-835769
+ enable workaround for AArch64 Cortex-A53 erratum
+ 835769 by default
+ --disable-fix-cortex-a53-835769
+ disable workaround for AArch64 Cortex-A53 erratum
+ 835769 by default
+
+
+ --enable-fix-cortex-a53-843419
+ enable workaround for AArch64 Cortex-A53 erratum
+ 843419 by default
+ --disable-fix-cortex-a53-843419
+ disable workaround for AArch64 Cortex-A53 erratum
+ 843419 by default
+
+ --enable-gnu-unique-object
+ enable the use of the @gnu_unique_object ELF
+ extension on glibc systems
+ --enable-linker-build-id
+ compiler will always pass --build-id to linker
+ --enable-libssp enable linking against libssp
+ --enable-default-ssp enable Stack Smashing Protection as default
+ --enable-maintainer-mode
+ enable make rules and dependencies not useful (and
+ sometimes confusing) to the casual installer
+ --enable-link-mutex avoid linking multiple front-ends at once to avoid
+ thrashing on the build machine
+ --enable-link-serialization
+ avoid linking multiple GCC front-ends at once using
+ make dependencies to avoid thrashing on the build
+ machine
+ --enable-version-specific-runtime-libs
+ specify that runtime libraries should be installed
+ in a compiler-specific directory
+ --enable-plugin enable plugin support
+ --enable-host-shared build host code as shared libraries
+ --disable-libquadmath-support
+ disable libquadmath support for Fortran
+ --enable-default-pie enable Position Independent Executable as default
+ --enable-cet enable Intel CET in host libraries [default=auto]
+ --enable-s390-excess-float-precision
+ on s390 targets, evaluate float with double
+ precision when in standards-conforming mode
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-build-libsubdir=DIR Directory where to find libraries for build system
+ --with-local-prefix=DIR specifies directory to put local include
+ --with-native-system-header-dir=dir
+ use dir as the directory to look for standard
+ system header files in. Defaults to /usr/include.
+ --with-build-sysroot=sysroot
+ use sysroot as the system root during the build
+ --with-sysroot[=DIR] search for usr/lib, usr/include, et al, within DIR
+ --with-gxx-include-dir=DIR
+ specifies directory to put g++ header files
+ --with-gxx-libcxx-include-dir=DIR
+ specifies directory to find libc++ header files
+ --with-cpp-install-dir=DIR
+ install the user visible C preprocessor in DIR
+ (relative to PREFIX) as well as PREFIX/bin
+ --with-gnu-ld arrange to work with GNU ld
+ --with-ld arrange to use the specified ld (full pathname)
+ --with-demangler-in-ld try to use demangler in GNU ld
+ --with-dsymutil arrange to use the specified dsymutil (full
+ pathname)
+ --with-gnu-as arrange to work with GNU as
+ --with-as arrange to use the specified as (full pathname)
+ --with-stack-clash-protection-guard-size=size
+ Set the default stack clash protection guard size
+ for specific targets as a power of two in bytes.
+ --with-dwarf2 force the default debug format to be DWARF 2
+ --with-specs=SPECS add SPECS to driver command-line processing
+ --with-pkgversion=PKG Use PKG in the version string in place of "GCC"
+ --with-bugurl=URL Direct users to URL to report a bug
+ --with-documentation-root-url=URL
+ Root for documentation URLs
+ --with-changes-root-url=URL
+ Root for GCC changes URLs
+ --with-multilib-list select multilibs (AArch64, ARM, AVR, OR1K, RISC-V,
+ SH and x86-64 only)
+ --with-extra-multilibs Select extra multilibs (ARM only)
+ --with-multilib-generator
+ Multi-libs configuration string (RISC-V only)
+ --with-zstd=PATH specify prefix directory for installed zstd library.
+ Equivalent to --with-zstd-include=PATH/include plus
+ --with-zstd-lib=PATH/lib
+ --with-zstd-include=PATH
+ specify directory for installed zstd include files
+ --with-zstd-lib=PATH specify directory for the installed zstd library
+ --with-gnu-ld assume the C compiler uses GNU ld default=no
+ --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
+ --without-libiconv-prefix don't search for libiconv in includedir and libdir
+ --with-libiconv-type=TYPE type of library to search for (auto/static/shared)
+ --with-gcc-major-version-only
+ use only GCC major number in filesystem paths
+ --with-pic try to use only PIC/non-PIC objects [default=use
+ both]
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
+ --with-plugin-ld=[ARG] specify the plugin linker
+ --with-glibc-version=M.N
+ assume GCC used with glibc version M.N or later
+ --with-long-double-128 use 128-bit long double by default
+ --with-long-double-format={ieee,ibm}
+ Specify whether PowerPC long double uses IEEE or IBM format
+
+ --with-gc={page,zone} this option is not supported anymore. It used to
+ choose the garbage collection mechanism to use with
+ the compiler
+ --with-system-zlib use installed libz
+ --with-linker-hash-style={sysv,gnu,both}
+ specify the linker hash style
+ --with-diagnostics-color={never,auto,auto-if-env,always}
+ specify the default of -fdiagnostics-color option
+ auto-if-env stands for -fdiagnostics-color=auto if
+ GCC_COLOR environment variable is present and
+ -fdiagnostics-color=never otherwise
+ --with-diagnostics-urls={never,auto,auto-if-env,always}
+ specify the default of -fdiagnostics-urls option
+ auto-if-env stands for -fdiagnostics-urls=auto if
+ GCC_URLS or TERM_URLS environment variable is
+ present and -fdiagnostics-urls=never otherwise
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+ CXX C++ compiler command
+ CXXFLAGS C++ compiler flags
+ CXXCPP C++ preprocessor
+ CPP C preprocessor
+ GMPLIBS How to link GMP
+ GMPINC How to find GMP include files
+ ISLLIBS How to link isl
+ ISLINC How to find isl include files
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to the package provider.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+configure
+generated by GNU Autoconf 2.69
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_cxx_try_compile LINENO
+# ----------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_compile
+
+# ac_fn_cxx_try_cpp LINENO
+# ------------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_cpp
+
+# ac_fn_cxx_check_header_mongrel LINENO HEADER VAR INCLUDES
+# ---------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_cxx_check_header_mongrel ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if eval \${$3+:} false; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_header_compiler=yes
+else
+ ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <$2>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ ac_header_preproc=yes
+else
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in #((
+ yes:no: )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
+ no:yes:* )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
+esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_cxx_check_header_mongrel
+
+# ac_fn_cxx_try_run LINENO
+# ------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_cxx_try_run ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=$ac_status
+fi
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_run
+
+# ac_fn_cxx_check_header_compile LINENO HEADER VAR INCLUDES
+# ---------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_cxx_check_header_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_cxx_check_header_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_cxx_compute_int LINENO EXPR VAR INCLUDES
+# ----------------------------------------------
+# Tries to find the compile-time value of EXPR in a program that includes
+# INCLUDES, setting VAR accordingly. Returns whether the value could be
+# computed
+ac_fn_cxx_compute_int ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) >= 0)];
+test_array [0] = 0;
+return test_array [0];
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) <= $ac_mid)];
+test_array [0] = 0;
+return test_array [0];
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_hi=$ac_mid; break
+else
+ as_fn_arith $ac_mid + 1 && ac_lo=$as_val
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) < 0)];
+test_array [0] = 0;
+return test_array [0];
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) >= $ac_mid)];
+test_array [0] = 0;
+return test_array [0];
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_lo=$ac_mid; break
+else
+ as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ ac_lo= ac_hi=
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) <= $ac_mid)];
+test_array [0] = 0;
+return test_array [0];
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_hi=$ac_mid
+else
+ as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in #((
+?*) eval "$3=\$ac_lo"; ac_retval=0 ;;
+'') ac_retval=1 ;;
+esac
+ else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+static long int longval () { return $2; }
+static unsigned long int ulongval () { return $2; }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ return 1;
+ if (($2) < 0)
+ {
+ long int i = longval ();
+ if (i != ($2))
+ return 1;
+ fprintf (f, "%ld", i);
+ }
+ else
+ {
+ unsigned long int i = ulongval ();
+ if (i != ($2))
+ return 1;
+ fprintf (f, "%lu", i);
+ }
+ /* Do not output a trailing newline, as this causes \r\n confusion
+ on some platforms. */
+ return ferror (f) || fclose (f) != 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_run "$LINENO"; then :
+ echo >>conftest.val; read $3 <conftest.val; ac_retval=0
+else
+ ac_retval=1
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+rm -f conftest.val
+
+ fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_compute_int
+
+# ac_fn_cxx_check_type LINENO TYPE VAR INCLUDES
+# ---------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_cxx_check_type ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=no"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+else
+ eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_cxx_check_type
+
+# ac_fn_c_find_intX_t LINENO BITS VAR
+# -----------------------------------
+# Finds a signed integer type with width BITS, setting cache variable VAR
+# accordingly.
+ac_fn_c_find_intX_t ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for int$2_t" >&5
+$as_echo_n "checking for int$2_t... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=no"
+ # Order is important - never check a type that is potentially smaller
+ # than half of the expected target width.
+ for ac_type in int$2_t 'int' 'long int' \
+ 'long long int' 'short int' 'signed char'; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+ enum { N = $2 / 2 - 1 };
+int
+main ()
+{
+static int test_array [1 - 2 * !(0 < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1))];
+test_array [0] = 0;
+return test_array [0];
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+ enum { N = $2 / 2 - 1 };
+int
+main ()
+{
+static int test_array [1 - 2 * !(($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1)
+ < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 2))];
+test_array [0] = 0;
+return test_array [0];
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+else
+ case $ac_type in #(
+ int$2_t) :
+ eval "$3=yes" ;; #(
+ *) :
+ eval "$3=\$ac_type" ;;
+esac
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ if eval test \"x\$"$3"\" = x"no"; then :
+
+else
+ break
+fi
+ done
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_find_intX_t
+
+# ac_fn_cxx_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ test -x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_link
+
+# ac_fn_c_find_uintX_t LINENO BITS VAR
+# ------------------------------------
+# Finds an unsigned integer type with width BITS, setting cache variable VAR
+# accordingly.
+ac_fn_c_find_uintX_t ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for uint$2_t" >&5
+$as_echo_n "checking for uint$2_t... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=no"
+ # Order is important - never check a type that is potentially smaller
+ # than half of the expected target width.
+ for ac_type in uint$2_t 'unsigned int' 'unsigned long int' \
+ 'unsigned long long int' 'unsigned short int' 'unsigned char'; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !((($ac_type) -1 >> ($2 / 2 - 1)) >> ($2 / 2 - 1) == 3)];
+test_array [0] = 0;
+return test_array [0];
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ case $ac_type in #(
+ uint$2_t) :
+ eval "$3=yes" ;; #(
+ *) :
+ eval "$3=\$ac_type" ;;
+esac
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ if eval test \"x\$"$3"\" = x"no"; then :
+
+else
+ break
+fi
+ done
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_find_uintX_t
+
+# ac_fn_cxx_check_header_preproc LINENO HEADER VAR
+# ------------------------------------------------
+# Tests whether HEADER is present, setting the cache variable VAR accordingly.
+ac_fn_cxx_check_header_preproc ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <$2>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_cxx_check_header_preproc
+
+# ac_fn_cxx_check_func LINENO FUNC VAR
+# ------------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_cxx_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_cxx_check_func
+
+# ac_fn_cxx_check_decl LINENO SYMBOL VAR INCLUDES
+# -----------------------------------------------
+# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR
+# accordingly.
+ac_fn_cxx_check_decl ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ as_decl_name=`echo $2|sed 's/ *(.*//'`
+ as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5
+$as_echo_n "checking whether $as_decl_name is declared... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+#ifndef $as_decl_name
+#ifdef __cplusplus
+ (void) $as_decl_use;
+#else
+ (void) $as_decl_name;
+#endif
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_cxx_check_decl
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ test -x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_preproc LINENO HEADER VAR
+# ----------------------------------------------
+# Tests whether HEADER is present, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_preproc ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_preproc
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by $as_me, which was
+generated by GNU Autoconf 2.69. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ $as_echo "PATH: $as_dir"
+ done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 2)
+ as_fn_append ac_configure_args1 " '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ as_fn_append ac_configure_args " '$ac_arg'"
+ ;;
+ esac
+ done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ # We do not want a PATH search for config.site.
+ case $CONFIG_SITE in #((
+ -*) ac_site_file1=./$CONFIG_SITE;;
+ */*) ac_site_file1=$CONFIG_SITE;;
+ *) ac_site_file1=./$CONFIG_SITE;;
+ esac
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file" \
+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+ac_config_headers="$ac_config_headers auto-host.h:config.in"
+
+
+gcc_version=`cat $srcdir/BASE-VER`
+
+# Determine the host, build, and target systems
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
+$as_echo_n "checking target system type... " >&6; }
+if ${ac_cv_target+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$target_alias" = x; then
+ ac_cv_target=$ac_cv_host
+else
+ ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
+$as_echo "$ac_cv_target" >&6; }
+case $ac_cv_target in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
+esac
+target=$ac_cv_target
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_target
+shift
+target_cpu=$1
+target_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+target_os=$*
+IFS=$ac_save_IFS
+case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
+
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+test -n "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
+# Determine the noncanonical host name, for Ada.
+ case ${build_alias} in
+ "") build_noncanonical=${build} ;;
+ *) build_noncanonical=${build_alias} ;;
+esac
+
+ case ${host_alias} in
+ "") host_noncanonical=${build_noncanonical} ;;
+ *) host_noncanonical=${host_alias} ;;
+esac
+
+
+
+
+# Determine the noncanonical target name, for directory use.
+ case ${target_alias} in
+ "") target_noncanonical=${host_noncanonical} ;;
+ *) target_noncanonical=${target_alias} ;;
+esac
+
+
+
+
+# Used for constructing correct paths for offload compilers.
+real_target_noncanonical=${target_noncanonical}
+accel_dir_suffix=
+
+# Determine the target- and build-specific subdirectories
+
+# post-stage1 host modules use a different CC_FOR_BUILD so, in order to
+# have matching libraries, they should use host libraries: Makefile.tpl
+# arranges to pass --with-build-libsubdir=$(HOST_SUBDIR).
+# However, they still use the build modules, because the corresponding
+# host modules (e.g. bison) are only built for the host when bootstrap
+# finishes. So:
+# - build_subdir is where we find build modules, and never changes.
+# - build_libsubdir is where we find build libraries, and can be overridden.
+
+# Prefix 'build-' so this never conflicts with target_subdir.
+build_subdir="build-${build_noncanonical}"
+
+# Check whether --with-build-libsubdir was given.
+if test "${with_build_libsubdir+set}" = set; then :
+ withval=$with_build_libsubdir; build_libsubdir="$withval"
+else
+ build_libsubdir="$build_subdir"
+fi
+
+# --srcdir=. covers the toplevel, while "test -d" covers the subdirectories
+if ( test $srcdir = . && test -d gcc ) \
+ || test -d $srcdir/../host-${host_noncanonical}; then
+ host_subdir="host-${host_noncanonical}"
+else
+ host_subdir=.
+fi
+# No prefix.
+target_subdir=${target_noncanonical}
+
+
+# Set program_transform_name
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+
+# Check for bogus environment variables.
+# Test if LIBRARY_PATH contains the notation for the current directory
+# since this would lead to problems installing/building glibc.
+# LIBRARY_PATH contains the current directory if one of the following
+# is true:
+# - one of the terminals (":" and ";") is the first or last sign
+# - two terminals occur directly after each other
+# - the path contains an element with a dot in it
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking LIBRARY_PATH variable" >&5
+$as_echo_n "checking LIBRARY_PATH variable... " >&6; }
+case ${LIBRARY_PATH} in
+ [:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
+ library_path_setting="contains current directory"
+ ;;
+ *)
+ library_path_setting="ok"
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $library_path_setting" >&5
+$as_echo "$library_path_setting" >&6; }
+if test "$library_path_setting" != "ok"; then
+as_fn_error $? "
+*** LIBRARY_PATH shouldn't contain the current directory when
+*** building gcc. Please change the environment variable
+*** and run configure again." "$LINENO" 5
+fi
+
+# Test if GCC_EXEC_PREFIX contains the notation for the current directory
+# since this would lead to problems installing/building glibc.
+# GCC_EXEC_PREFIX contains the current directory if one of the following
+# is true:
+# - one of the terminals (":" and ";") is the first or last sign
+# - two terminals occur directly after each other
+# - the path contains an element with a dot in it
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking GCC_EXEC_PREFIX variable" >&5
+$as_echo_n "checking GCC_EXEC_PREFIX variable... " >&6; }
+case ${GCC_EXEC_PREFIX} in
+ [:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
+ gcc_exec_prefix_setting="contains current directory"
+ ;;
+ *)
+ gcc_exec_prefix_setting="ok"
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_exec_prefix_setting" >&5
+$as_echo "$gcc_exec_prefix_setting" >&6; }
+if test "$gcc_exec_prefix_setting" != "ok"; then
+as_fn_error $? "
+*** GCC_EXEC_PREFIX shouldn't contain the current directory when
+*** building gcc. Please change the environment variable
+*** and run configure again." "$LINENO" 5
+fi
+
+# -----------
+# Directories
+# -----------
+
+# Specify the local prefix
+local_prefix=
+
+# Check whether --with-local-prefix was given.
+if test "${with_local_prefix+set}" = set; then :
+ withval=$with_local_prefix; case "${withval}" in
+yes) as_fn_error $? "bad value ${withval} given for local include directory prefix" "$LINENO" 5 ;;
+no) ;;
+*) local_prefix=$with_local_prefix ;;
+esac
+fi
+
+
+# Default local prefix if it is empty
+if test x$local_prefix = x; then
+ local_prefix=/usr/local
+fi
+
+
+# Check whether --with-native-system-header-dir was given.
+if test "${with_native_system_header_dir+set}" = set; then :
+ withval=$with_native_system_header_dir;
+ case ${with_native_system_header_dir} in
+ yes|no) as_fn_error $? "bad value ${withval} given for --with-native-system-header-dir" "$LINENO" 5 ;;
+ /* | [A-Za-z]:[\\/]*) ;;
+ *) as_fn_error $? "--with-native-system-header-dir argument ${withval} must be an absolute directory" "$LINENO" 5 ;;
+ esac
+ configured_native_system_header_dir="${withval}"
+
+else
+ configured_native_system_header_dir=
+fi
+
+
+
+# Check whether --with-build-sysroot was given.
+if test "${with_build_sysroot+set}" = set; then :
+ withval=$with_build_sysroot; if test x"$withval" != x ; then
+ SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval"
+ fi
+else
+ SYSROOT_CFLAGS_FOR_TARGET=
+fi
+
+
+
+if test "x$prefix" = xNONE; then
+ test_prefix=/usr/local
+else
+ test_prefix=$prefix
+fi
+if test "x$exec_prefix" = xNONE; then
+ test_exec_prefix=$test_prefix
+else
+ test_exec_prefix=$exec_prefix
+fi
+
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+ withval=$with_sysroot;
+ case ${with_sysroot} in
+ /) ;;
+ */) with_sysroot=`echo $with_sysroot | sed 's,/$,,'` ;;
+ esac
+ case ${with_sysroot} in
+ yes) TARGET_SYSTEM_ROOT='${exec_prefix}/${target_noncanonical}/sys-root' ;;
+ *) TARGET_SYSTEM_ROOT=$with_sysroot ;;
+ esac
+
+ TARGET_SYSTEM_ROOT_DEFINE='-DTARGET_SYSTEM_ROOT=\"$(TARGET_SYSTEM_ROOT)\"'
+ CROSS_SYSTEM_HEADER_DIR='$(TARGET_SYSTEM_ROOT)$${sysroot_headers_suffix}$(NATIVE_SYSTEM_HEADER_DIR)'
+
+ case ${TARGET_SYSTEM_ROOT} in
+ "${test_prefix}"|"${test_prefix}/"*|\
+ "${test_exec_prefix}"|"${test_exec_prefix}/"*|\
+ '${prefix}'|'${prefix}/'*|\
+ '${exec_prefix}'|'${exec_prefix}/'*)
+ t="$TARGET_SYSTEM_ROOT_DEFINE -DTARGET_SYSTEM_ROOT_RELOCATABLE"
+ TARGET_SYSTEM_ROOT_DEFINE="$t"
+ ;;
+ esac
+
+else
+
+ TARGET_SYSTEM_ROOT=
+ TARGET_SYSTEM_ROOT_DEFINE=
+ CROSS_SYSTEM_HEADER_DIR='$(gcc_tooldir)/sys-include'
+
+fi
+
+
+
+
+
+# Don't set gcc_gxx_include_dir to gxx_include_dir since that's only
+# passed in by the toplevel make and thus we'd get different behavior
+# depending on where we built the sources.
+gcc_gxx_include_dir=
+# Specify the g++ header file directory
+
+# Check whether --with-gxx-include-dir was given.
+if test "${with_gxx_include_dir+set}" = set; then :
+ withval=$with_gxx_include_dir; case "${withval}" in
+yes) as_fn_error $? "bad value ${withval} given for g++ include directory" "$LINENO" 5 ;;
+no) ;;
+*) gcc_gxx_include_dir=$with_gxx_include_dir ;;
+esac
+fi
+
+
+# If both --with-sysroot and --with-gxx-include-dir are passed, we interpolate
+# the former in the latter and, upon success, compute gcc_gxx_include_dir as
+# relative to the sysroot.
+gcc_gxx_include_dir_add_sysroot=0
+
+# This logic must match libstdc++-v3/acinclude.m4:GLIBCXX_EXPORT_INSTALL_INFO.
+if test x${gcc_gxx_include_dir} = x; then
+ if test x${enable_version_specific_runtime_libs} = xyes; then
+ gcc_gxx_include_dir='${libsubdir}/include/c++'
+ else
+ libstdcxx_incdir='include/c++/$(version)'
+ if test x$host != x$target; then
+ libstdcxx_incdir="$target_alias/$libstdcxx_incdir"
+ fi
+ gcc_gxx_include_dir="\$(libsubdir)/\$(libsubdir_to_prefix)$libstdcxx_incdir"
+ fi
+elif test "${with_sysroot+set}" = set; then
+ gcc_gxx_without_sysroot=`expr "${gcc_gxx_include_dir}" : "${with_sysroot}"'\(.*\)'`
+ if test "${gcc_gxx_without_sysroot}"; then
+ gcc_gxx_include_dir="${gcc_gxx_without_sysroot}"
+ gcc_gxx_include_dir_add_sysroot=1
+ fi
+fi
+
+# Configuration for an alternate set of C++ headers.
+gcc_gxx_libcxx_include_dir=
+# Specify the alternate g++ header file directory
+
+# Check whether --with-gxx-libcxx-include-dir was given.
+if test "${with_gxx_libcxx_include_dir+set}" = set; then :
+ withval=$with_gxx_libcxx_include_dir; case "${withval}" in
+yes) as_fn_error $? "bad value ${withval} given for libc++ include directory" "$LINENO" 5 ;;
+no) ;;
+*) gcc_gxx_libcxx_include_dir=$with_gxx_libcxx_include_dir ;;
+esac
+fi
+
+
+# If both --with-sysroot and --with-gxx-libcxx-include-dir are passed, we
+# check to see if the latter starts with the former and, upon success, compute
+# gcc_gxx_libcxx_include_dir as relative to the sysroot.
+gcc_gxx_libcxx_include_dir_add_sysroot=0
+
+if test x${gcc_gxx_libcxx_include_dir} != x; then
+
+$as_echo "#define ENABLE_STDLIB_OPTION 1" >>confdefs.h
+
+else
+ $as_echo "#define ENABLE_STDLIB_OPTION 0" >>confdefs.h
+
+fi
+# ??? This logic must match libstdc++-v3/acinclude.m4:GLIBCXX_EXPORT_INSTALL_INFO.
+if test x${gcc_gxx_libcxx_include_dir} = x; then
+ if test x${enable_version_specific_runtime_libs} = xyes; then
+ gcc_gxx_libcxx_include_dir='${libsubdir}/libc++_include/c++/v1'
+ else
+ libcxx_incdir='libc++_include/c++/$(version)/v1'
+ if test x$host != x$target; then
+ libcxx_incdir="$target_alias/$libcxx_incdir"
+ fi
+ gcc_gxx_libcxx_include_dir="\$(libsubdir)/\$(libsubdir_to_prefix)$libcxx_incdir"
+ fi
+elif test "${with_sysroot+set}" = set; then
+ gcc_gxx_libcxx_without_sysroot=`expr "${gcc_gxx_libcxx_include_dir}" : "${with_sysroot}"'\(.*\)'`
+ if test "${gcc_gxx_libcxx_without_sysroot}"; then
+ gcc_gxx_libcxx_include_dir="${gcc_gxx_libcxx_without_sysroot}"
+ gcc_gxx_libcxx_include_dir_add_sysroot=1
+ fi
+fi
+
+
+# Check whether --with-cpp_install_dir was given.
+if test "${with_cpp_install_dir+set}" = set; then :
+ withval=$with_cpp_install_dir; if test x$withval = xyes; then
+ as_fn_error $? "option --with-cpp-install-dir requires an argument" "$LINENO" 5
+elif test x$withval != xno; then
+ cpp_install_dir=$withval
+fi
+fi
+
+
+# We would like to our source tree to be readonly. However when releases or
+# pre-releases are generated, the flex/bison generated files as well as the
+# various formats of manuals need to be included along with the rest of the
+# sources. Therefore we have --enable-generated-files-in-srcdir to do
+# just that.
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to place generated files in the source directory" >&5
+$as_echo_n "checking whether to place generated files in the source directory... " >&6; }
+ # Check whether --enable-generated-files-in-srcdir was given.
+if test "${enable_generated_files_in_srcdir+set}" = set; then :
+ enableval=$enable_generated_files_in_srcdir; generated_files_in_srcdir=$enableval
+else
+ generated_files_in_srcdir=no
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $generated_files_in_srcdir" >&5
+$as_echo "$generated_files_in_srcdir" >&6; }
+
+if test "$generated_files_in_srcdir" = "yes"; then
+ GENINSRC=''
+else
+ GENINSRC='#'
+fi
+
+
+# -------------------
+# Find default linker
+# -------------------
+
+# With GNU ld
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; gnu_ld_flag="$with_gnu_ld"
+else
+ gnu_ld_flag=no
+fi
+
+
+case $target in
+ *darwin*)
+ ld64_flag=yes # Darwin can only use a ld64-compatible linker.
+ dsymutil_flag=yes # Darwin uses dsymutil to link debug.
+ ;;
+ *)
+ ld64_flag=no
+ dsymutil_flag=no
+ ;;
+esac
+
+# With pre-defined ld
+
+# Check whether --with-ld was given.
+if test "${with_ld+set}" = set; then :
+ withval=$with_ld; DEFAULT_LINKER="$with_ld"
+fi
+
+if test x"${DEFAULT_LINKER+set}" = x"set"; then
+ if test ! -x "$DEFAULT_LINKER"; then
+ as_fn_error $? "cannot execute: $DEFAULT_LINKER: check --with-ld or env. var. DEFAULT_LINKER" "$LINENO" 5
+ elif $DEFAULT_LINKER -v < /dev/null 2>&1 | grep GNU > /dev/null; then
+ gnu_ld_flag=yes
+ elif $DEFAULT_LINKER -v < /dev/null 2>&1 | grep ld64- > /dev/null; then
+ ld64_flag=yes
+ fi
+
+cat >>confdefs.h <<_ACEOF
+#define DEFAULT_LINKER "$DEFAULT_LINKER"
+_ACEOF
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a default linker was specified" >&5
+$as_echo_n "checking whether a default linker was specified... " >&6; }
+if test x"${DEFAULT_LINKER+set}" = x"set"; then
+ if test x"$gnu_ld_flag" = x"no"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes ($DEFAULT_LINKER)" >&5
+$as_echo "yes ($DEFAULT_LINKER)" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes ($DEFAULT_LINKER - GNU ld)" >&5
+$as_echo "yes ($DEFAULT_LINKER - GNU ld)" >&6; }
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+# With demangler in GNU ld
+
+# Check whether --with-demangler-in-ld was given.
+if test "${with_demangler_in_ld+set}" = set; then :
+ withval=$with_demangler_in_ld; demangler_in_ld="$with_demangler_in_ld"
+else
+ demangler_in_ld=yes
+fi
+
+
+# Allow the user to specify a dsymutil executable (used on Darwin only, so far)
+
+# Check whether --with-dsymutil was given.
+if test "${with_dsymutil+set}" = set; then :
+ withval=$with_dsymutil; DEFAULT_DSYMUTIL="$with_dsymutil"
+fi
+
+
+dsymutil_vers=
+if test x"${DEFAULT_DSYMUTIL+set}" = x"set"; then
+ if test ! -x "$DEFAULT_DSYMUTIL"; then
+ as_fn_error $? "cannot execute: $DEFAULT_DSYMUTIL: check --with-dsymutil or env. var. DEFAULT_DSYMUTIL" "$LINENO" 5
+ else
+ if dsymutil_vers=`$DEFAULT_DSYMUTIL -v /dev/null 2>&1`; then
+ dsymutil_flag=yes
+ fi
+ fi
+
+cat >>confdefs.h <<_ACEOF
+#define DEFAULT_DSYMUTIL "$DEFAULT_DSYMUTIL"
+_ACEOF
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a default dsymutil was specified" >&5
+$as_echo_n "checking whether a default dsymutil was specified... " >&6; }
+if test x"${DEFAULT_DSYMUTIL+set}" = x"set"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes ($DEFAULT_DSYMUTIL)" >&5
+$as_echo "yes ($DEFAULT_DSYMUTIL)" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+# ----------------------
+# Find default assembler
+# ----------------------
+
+# With GNU as
+
+# Check whether --with-gnu-as was given.
+if test "${with_gnu_as+set}" = set; then :
+ withval=$with_gnu_as; gas_flag="$with_gnu_as"
+else
+ gas_flag=no
+fi
+
+
+
+# Check whether --with-as was given.
+if test "${with_as+set}" = set; then :
+ withval=$with_as; DEFAULT_ASSEMBLER="$with_as"
+fi
+
+if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
+ if test ! -x "$DEFAULT_ASSEMBLER"; then
+ as_fn_error $? "cannot execute: $DEFAULT_ASSEMBLER: check --with-as or env. var. DEFAULT_ASSEMBLER" "$LINENO" 5
+ elif $DEFAULT_ASSEMBLER -v < /dev/null 2>&1 | grep GNU > /dev/null; then
+ gas_flag=yes
+ fi
+
+cat >>confdefs.h <<_ACEOF
+#define DEFAULT_ASSEMBLER "$DEFAULT_ASSEMBLER"
+_ACEOF
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a default assembler was specified" >&5
+$as_echo_n "checking whether a default assembler was specified... " >&6; }
+if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
+ if test x"$gas_flag" = x"no"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes ($DEFAULT_ASSEMBLER)" >&5
+$as_echo "yes ($DEFAULT_ASSEMBLER)" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes ($DEFAULT_ASSEMBLER - GNU as)" >&5
+$as_echo "yes ($DEFAULT_ASSEMBLER - GNU as)" >&6; }
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+# ---------------
+# Find C compiler
+# ---------------
+
+# If a non-executable a.out is present (e.g. created by GNU as above even if
+# invoked with -v only), the IRIX 6 native ld just overwrites the existing
+# file, even when creating an executable, so an execution test fails.
+# Remove possible default executable files to avoid this.
+#
+# FIXME: This really belongs into AC_PROG_CC and can be removed once
+# Autoconf includes it.
+rm -f a.out a.exe b.out
+
+# Find the native compiler
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+if test -z "$ac_file"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+ { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if { ac_try='./conftest$ac_cv_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+else
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -z "$CXX"; then
+ if test -n "$CCC"; then
+ CXX=$CCC
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
+$as_echo "$CXX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CXX" && break
+ done
+fi
+if test -z "$CXX"; then
+ ac_ct_CXX=$CXX
+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CXX"; then
+ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CXX="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
+$as_echo "$ac_ct_CXX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CXX" && break
+done
+
+ if test "x$ac_ct_CXX" = x; then
+ CXX="g++"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CXX=$ac_ct_CXX
+ fi
+fi
+
+ fi
+fi
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
+$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
+if ${ac_cv_cxx_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
+$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GXX=yes
+else
+ GXX=
+fi
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
+$as_echo_n "checking whether $CXX accepts -g... " >&6; }
+if ${ac_cv_prog_cxx_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_cxx_werror_flag=$ac_cxx_werror_flag
+ ac_cxx_werror_flag=yes
+ ac_cv_prog_cxx_g=no
+ CXXFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_prog_cxx_g=yes
+else
+ CXXFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+else
+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+ CXXFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_prog_cxx_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
+$as_echo "$ac_cv_prog_cxx_g" >&6; }
+if test "$ac_test_CXXFLAGS" = set; then
+ CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+ if test "$GXX" = yes; then
+ CXXFLAGS="-g -O2"
+ else
+ CXXFLAGS="-g"
+ fi
+else
+ if test "$GXX" = yes; then
+ CXXFLAGS="-O2"
+ else
+ CXXFLAGS=
+ fi
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_GNATBIND+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$GNATBIND"; then
+ ac_cv_prog_GNATBIND="$GNATBIND" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GNATBIND="${ac_tool_prefix}gnatbind"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+GNATBIND=$ac_cv_prog_GNATBIND
+if test -n "$GNATBIND"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNATBIND" >&5
+$as_echo "$GNATBIND" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_GNATBIND"; then
+ ac_ct_GNATBIND=$GNATBIND
+ # Extract the first word of "gnatbind", so it can be a program name with args.
+set dummy gnatbind; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_GNATBIND+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_GNATBIND"; then
+ ac_cv_prog_ac_ct_GNATBIND="$ac_ct_GNATBIND" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_GNATBIND="gnatbind"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_GNATBIND=$ac_cv_prog_ac_ct_GNATBIND
+if test -n "$ac_ct_GNATBIND"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_GNATBIND" >&5
+$as_echo "$ac_ct_GNATBIND" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_GNATBIND" = x; then
+ GNATBIND="no"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ GNATBIND=$ac_ct_GNATBIND
+ fi
+else
+ GNATBIND="$ac_cv_prog_GNATBIND"
+fi
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gnatmake", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gnatmake; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_GNATMAKE+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$GNATMAKE"; then
+ ac_cv_prog_GNATMAKE="$GNATMAKE" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GNATMAKE="${ac_tool_prefix}gnatmake"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+GNATMAKE=$ac_cv_prog_GNATMAKE
+if test -n "$GNATMAKE"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GNATMAKE" >&5
+$as_echo "$GNATMAKE" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_GNATMAKE"; then
+ ac_ct_GNATMAKE=$GNATMAKE
+ # Extract the first word of "gnatmake", so it can be a program name with args.
+set dummy gnatmake; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_GNATMAKE+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_GNATMAKE"; then
+ ac_cv_prog_ac_ct_GNATMAKE="$ac_ct_GNATMAKE" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_GNATMAKE="gnatmake"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_GNATMAKE=$ac_cv_prog_ac_ct_GNATMAKE
+if test -n "$ac_ct_GNATMAKE"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_GNATMAKE" >&5
+$as_echo "$ac_ct_GNATMAKE" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_GNATMAKE" = x; then
+ GNATMAKE="no"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ GNATMAKE=$ac_ct_GNATMAKE
+ fi
+else
+ GNATMAKE="$ac_cv_prog_GNATMAKE"
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether compiler driver understands Ada" >&5
+$as_echo_n "checking whether compiler driver understands Ada... " >&6; }
+if ${acx_cv_cc_gcc_supports_ada+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.adb <<EOF
+procedure conftest is begin null; end conftest;
+EOF
+acx_cv_cc_gcc_supports_ada=no
+# There is a bug in old released versions of GCC which causes the
+# driver to exit successfully when the appropriate language module
+# has not been installed. This is fixed in 2.95.4, 3.0.2, and 3.1.
+# Therefore we must check for the error message as well as an
+# unsuccessful exit.
+# Other compilers, like HP Tru64 UNIX cc, exit successfully when
+# given a .adb file, but produce no object file. So we must check
+# if an object file was really produced to guard against this.
+errors=`(${CC} -I"$srcdir"/ada/libgnat -c conftest.adb) 2>&1 || echo failure`
+if test x"$errors" = x && test -f conftest.$ac_objext; then
+ acx_cv_cc_gcc_supports_ada=yes
+fi
+rm -f conftest.*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acx_cv_cc_gcc_supports_ada" >&5
+$as_echo "$acx_cv_cc_gcc_supports_ada" >&6; }
+
+if test "x$GNATBIND" != xno && test "x$GNATMAKE" != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then
+ have_gnat=yes
+else
+ have_gnat=no
+fi
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gdc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gdc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_GDC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$GDC"; then
+ ac_cv_prog_GDC="$GDC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GDC="${ac_tool_prefix}gdc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+GDC=$ac_cv_prog_GDC
+if test -n "$GDC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GDC" >&5
+$as_echo "$GDC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_GDC"; then
+ ac_ct_GDC=$GDC
+ # Extract the first word of "gdc", so it can be a program name with args.
+set dummy gdc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_GDC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_GDC"; then
+ ac_cv_prog_ac_ct_GDC="$ac_ct_GDC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_GDC="gdc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_GDC=$ac_cv_prog_ac_ct_GDC
+if test -n "$ac_ct_GDC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_GDC" >&5
+$as_echo "$ac_ct_GDC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_GDC" = x; then
+ GDC="no"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ GDC=$ac_ct_GDC
+ fi
+else
+ GDC="$ac_cv_prog_GDC"
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the D compiler works" >&5
+$as_echo_n "checking whether the D compiler works... " >&6; }
+if ${acx_cv_d_compiler_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.d <<EOF
+module conftest; int main() { return 0; }
+EOF
+acx_cv_d_compiler_works=no
+if test "x$GDC" != xno; then
+ errors=`(${GDC} -I"$srcdir"/d -c conftest.d) 2>&1 || echo failure`
+ if test x"$errors" = x && test -f conftest.$ac_objext; then
+ acx_cv_d_compiler_works=yes
+ fi
+ rm -f conftest.*
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acx_cv_d_compiler_works" >&5
+$as_echo "$acx_cv_d_compiler_works" >&6; }
+if test "x$GDC" != xno && test x$acx_cv_d_compiler_works != xno; then
+ have_gdc=yes
+else
+ have_gdc=no
+fi
+
+
+# Do configure tests with the C++ compiler, since that's what we build with.
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+# Remove the -O2: for historical reasons, unless bootstrapping we prefer
+# optimizations to be activated explicitly by the toplevel.
+case "$CC" in
+ */prev-gcc/xgcc*) ;;
+ *) CFLAGS=`echo "$CFLAGS " | sed -e "s/-Ofast[ ]//" -e "s/-O[gs][ ]//" -e "s/-O[0-9]*[ ]//" `
+ CXXFLAGS=`echo "$CXXFLAGS " | sed -e "s/-Ofast[ ]//" -e "s/-O[gs][ ]//" -e "s/-O[0-9]*[ ]//" ` ;;
+esac
+
+
+
+
+# Determine PICFLAG for target gnatlib.
+
+
+
+
+case "${target}" in
+ # PIC is the default on some targets or must not be used.
+ *-*-darwin*)
+ # For darwin, common symbols are not allowed in MH_DYLIB files
+ case "${CFLAGS}" in
+ # If we are using a compiler supporting mdynamic-no-pic
+ # and the option has been tested as safe to add, then cancel
+ # it here, since the code generated is incompatible with shared
+ # libs.
+ *-mdynamic-no-pic*) PICFLAG_FOR_TARGET='-fno-common -mno-dynamic-no-pic' ;;
+ *) PICFLAG_FOR_TARGET=-fno-common ;;
+ esac
+ ;;
+ alpha*-dec-osf5*)
+ # PIC is the default.
+ ;;
+ hppa*64*-*-hpux*)
+ # PIC is the default for 64-bit PA HP-UX.
+ ;;
+ i[34567]86-*-cygwin* | x86_64-*-cygwin*)
+ ;;
+ i[34567]86-*-mingw* | x86_64-*-mingw*)
+ ;;
+ i[34567]86-*-interix[3-9]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+ i[34567]86-*-nto-qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ PICFLAG_FOR_TARGET='-fPIC -shared'
+ ;;
+ i[34567]86-pc-msdosdjgpp*)
+ # DJGPP does not support shared libraries at all.
+ ;;
+ ia64*-*-hpux*)
+ # On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ PICFLAG_FOR_TARGET=-fPIC
+ ;;
+ loongarch*-*-*)
+ PICFLAG_FOR_TARGET=-fpic
+ ;;
+ mips-sgi-irix6*)
+ # PIC is the default.
+ ;;
+ rs6000-ibm-aix* | powerpc-ibm-aix*)
+ # All AIX code is PIC.
+ ;;
+
+ # Some targets support both -fPIC and -fpic, but prefer the latter.
+ # FIXME: Why?
+ i[34567]86-*-* | x86_64-*-*)
+ PICFLAG_FOR_TARGET=-fpic
+ ;;
+ # FIXME: Override -fPIC default in libgcc only?
+ sh-*-linux* | sh[2346lbe]*-*-linux*)
+ PICFLAG_FOR_TARGET=-fpic
+ ;;
+ # FIXME: Simplify to sh*-*-netbsd*?
+ sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
+ sh64-*-netbsd* | sh64l*-*-netbsd*)
+ PICFLAG_FOR_TARGET=-fpic
+ ;;
+ # Default to -fPIC unless specified otherwise.
+ *)
+ PICFLAG_FOR_TARGET=-fPIC
+ ;;
+esac
+
+# If the user explicitly uses -fpic/-fPIC, keep that.
+case "${CFLAGS_FOR_TARGET}" in
+ *-fpic*)
+ PICFLAG_FOR_TARGET=-fpic
+ ;;
+ *-fPIC*)
+ PICFLAG_FOR_TARGET=-fPIC
+ ;;
+esac
+
+
+
+# -------------------------
+# Check C compiler features
+# -------------------------
+
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
+$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
+if test -z "$CXXCPP"; then
+ if ${ac_cv_prog_CXXCPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CXXCPP needs to be expanded
+ for CXXCPP in "$CXX -E" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+ CXXCPP=$ac_cv_prog_CXXCPP
+else
+ ac_cv_prog_CXXCPP=$CXXCPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
+$as_echo "$CXXCPP" >&6; }
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$GREP"; then
+ ac_path_GREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_GREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ if test -z "$EGREP"; then
+ ac_path_EGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_EGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_EGREP=$EGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_run "$LINENO"; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_cxx_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+ ac_fn_cxx_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default"
+if test "x$ac_cv_header_minix_config_h" = xyes; then :
+ MINIX=yes
+else
+ MINIX=
+fi
+
+
+ if test "$MINIX" = yes; then
+
+$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h
+
+
+$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h
+
+
+$as_echo "#define _MINIX 1" >>confdefs.h
+
+ fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5
+$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; }
+if ${ac_cv_safe_to_define___extensions__+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+# define __EXTENSIONS__ 1
+ $ac_includes_default
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_safe_to_define___extensions__=yes
+else
+ ac_cv_safe_to_define___extensions__=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5
+$as_echo "$ac_cv_safe_to_define___extensions__" >&6; }
+ test $ac_cv_safe_to_define___extensions__ = yes &&
+ $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h
+
+ $as_echo "#define _ALL_SOURCE 1" >>confdefs.h
+
+ $as_echo "#define _GNU_SOURCE 1" >>confdefs.h
+
+ $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h
+
+ $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if ${ac_cv_prog_CPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5
+$as_echo_n "checking for inline... " >&6; }
+if ${ac_cv_c_inline+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifndef __cplusplus
+typedef int foo_t;
+static $ac_kw foo_t static_foo () {return 0; }
+$ac_kw foo_t foo () {return 0; }
+#endif
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_c_inline=$ac_kw
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ test "$ac_cv_c_inline" != no && break
+done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5
+$as_echo "$ac_cv_c_inline" >&6; }
+
+case $ac_cv_c_inline in
+ inline | yes) ;;
+ *)
+ case $ac_cv_c_inline in
+ no) ac_val=;;
+ *) ac_val=$ac_cv_c_inline;;
+ esac
+ cat >>confdefs.h <<_ACEOF
+#ifndef __cplusplus
+#define inline $ac_val
+#endif
+_ACEOF
+ ;;
+esac
+
+
+# Check whether --enable-largefile was given.
+if test "${enable_largefile+set}" = set; then :
+ enableval=$enable_largefile;
+fi
+
+if test "$enable_largefile" != no; then
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5
+$as_echo_n "checking for special C compiler options needed for large files... " >&6; }
+if ${ac_cv_sys_largefile_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_sys_largefile_CC=no
+ if test "$GCC" != yes; then
+ ac_save_CC=$CC
+ while :; do
+ # IRIX 6.2 and later do not support large files by default,
+ # so use the C compiler's -n32 option if that helps.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ if ac_fn_cxx_try_compile "$LINENO"; then :
+ break
+fi
+rm -f core conftest.err conftest.$ac_objext
+ CC="$CC -n32"
+ if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_sys_largefile_CC=' -n32'; break
+fi
+rm -f core conftest.err conftest.$ac_objext
+ break
+ done
+ CC=$ac_save_CC
+ rm -f conftest.$ac_ext
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5
+$as_echo "$ac_cv_sys_largefile_CC" >&6; }
+ if test "$ac_cv_sys_largefile_CC" != no; then
+ CC=$CC$ac_cv_sys_largefile_CC
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5
+$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; }
+if ${ac_cv_sys_file_offset_bits+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_sys_file_offset_bits=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#define _FILE_OFFSET_BITS 64
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_sys_file_offset_bits=64; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_sys_file_offset_bits=unknown
+ break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5
+$as_echo "$ac_cv_sys_file_offset_bits" >&6; }
+case $ac_cv_sys_file_offset_bits in #(
+ no | unknown) ;;
+ *)
+cat >>confdefs.h <<_ACEOF
+#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
+_ACEOF
+;;
+esac
+rm -rf conftest*
+ if test $ac_cv_sys_file_offset_bits = unknown; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5
+$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; }
+if ${ac_cv_sys_large_files+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_sys_large_files=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#define _LARGE_FILES 1
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_sys_large_files=1; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_sys_large_files=unknown
+ break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5
+$as_echo "$ac_cv_sys_large_files" >&6; }
+case $ac_cv_sys_large_files in #(
+ no | unknown) ;;
+ *)
+cat >>confdefs.h <<_ACEOF
+#define _LARGE_FILES $ac_cv_sys_large_files
+_ACEOF
+;;
+esac
+rm -rf conftest*
+ fi
+
+
+fi
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of ino_t" >&5
+$as_echo_n "checking size of ino_t... " >&6; }
+if ${ac_cv_sizeof_ino_t+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if ac_fn_cxx_compute_int "$LINENO" "(long int) (sizeof (ino_t))" "ac_cv_sizeof_ino_t" "$ac_includes_default"; then :
+
+else
+ if test "$ac_cv_type_ino_t" = yes; then
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (ino_t)
+See \`config.log' for more details" "$LINENO" 5; }
+ else
+ ac_cv_sizeof_ino_t=0
+ fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_ino_t" >&5
+$as_echo "$ac_cv_sizeof_ino_t" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_INO_T $ac_cv_sizeof_ino_t
+_ACEOF
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of dev_t" >&5
+$as_echo_n "checking size of dev_t... " >&6; }
+if ${ac_cv_sizeof_dev_t+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if ac_fn_cxx_compute_int "$LINENO" "(long int) (sizeof (dev_t))" "ac_cv_sizeof_dev_t" "$ac_includes_default"; then :
+
+else
+ if test "$ac_cv_type_dev_t" = yes; then
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (dev_t)
+See \`config.log' for more details" "$LINENO" 5; }
+ else
+ ac_cv_sizeof_dev_t=0
+ fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_dev_t" >&5
+$as_echo "$ac_cv_sizeof_dev_t" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_DEV_T $ac_cv_sizeof_dev_t
+_ACEOF
+
+
+
+# Select the right stat being able to handle 64bit inodes, if needed.
+if test "$enable_largefile" != no; then
+ case "$host, $build" in
+ *-*-aix*,*|*,*-*-aix*)
+ if test "$ac_cv_sizeof_ino_t" == "4" -a "$ac_cv_sizeof_dev_t" == 4; then
+
+$as_echo "#define HOST_STAT_FOR_64BIT_INODES stat64x" >>confdefs.h
+
+ fi;;
+ esac
+fi
+
+
+# sizeof(char) is 1 by definition.
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of void *" >&5
+$as_echo_n "checking size of void *... " >&6; }
+if ${ac_cv_sizeof_void_p+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if ac_fn_cxx_compute_int "$LINENO" "(long int) (sizeof (void *))" "ac_cv_sizeof_void_p" "$ac_includes_default"; then :
+
+else
+ if test "$ac_cv_type_void_p" = yes; then
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (void *)
+See \`config.log' for more details" "$LINENO" 5; }
+ else
+ ac_cv_sizeof_void_p=0
+ fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_void_p" >&5
+$as_echo "$ac_cv_sizeof_void_p" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_VOID_P $ac_cv_sizeof_void_p
+_ACEOF
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of short" >&5
+$as_echo_n "checking size of short... " >&6; }
+if ${ac_cv_sizeof_short+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if ac_fn_cxx_compute_int "$LINENO" "(long int) (sizeof (short))" "ac_cv_sizeof_short" "$ac_includes_default"; then :
+
+else
+ if test "$ac_cv_type_short" = yes; then
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (short)
+See \`config.log' for more details" "$LINENO" 5; }
+ else
+ ac_cv_sizeof_short=0
+ fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_short" >&5
+$as_echo "$ac_cv_sizeof_short" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_SHORT $ac_cv_sizeof_short
+_ACEOF
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of int" >&5
+$as_echo_n "checking size of int... " >&6; }
+if ${ac_cv_sizeof_int+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if ac_fn_cxx_compute_int "$LINENO" "(long int) (sizeof (int))" "ac_cv_sizeof_int" "$ac_includes_default"; then :
+
+else
+ if test "$ac_cv_type_int" = yes; then
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (int)
+See \`config.log' for more details" "$LINENO" 5; }
+ else
+ ac_cv_sizeof_int=0
+ fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_int" >&5
+$as_echo "$ac_cv_sizeof_int" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_INT $ac_cv_sizeof_int
+_ACEOF
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long" >&5
+$as_echo_n "checking size of long... " >&6; }
+if ${ac_cv_sizeof_long+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if ac_fn_cxx_compute_int "$LINENO" "(long int) (sizeof (long))" "ac_cv_sizeof_long" "$ac_includes_default"; then :
+
+else
+ if test "$ac_cv_type_long" = yes; then
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (long)
+See \`config.log' for more details" "$LINENO" 5; }
+ else
+ ac_cv_sizeof_long=0
+ fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long" >&5
+$as_echo "$ac_cv_sizeof_long" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_LONG $ac_cv_sizeof_long
+_ACEOF
+
+
+ac_fn_cxx_check_type "$LINENO" "long long" "ac_cv_type_long_long" "$ac_includes_default"
+if test "x$ac_cv_type_long_long" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_LONG_LONG 1
+_ACEOF
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long long" >&5
+$as_echo_n "checking size of long long... " >&6; }
+if ${ac_cv_sizeof_long_long+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if ac_fn_cxx_compute_int "$LINENO" "(long int) (sizeof (long long))" "ac_cv_sizeof_long_long" "$ac_includes_default"; then :
+
+else
+ if test "$ac_cv_type_long_long" = yes; then
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (long long)
+See \`config.log' for more details" "$LINENO" 5; }
+ else
+ ac_cv_sizeof_long_long=0
+ fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long_long" >&5
+$as_echo "$ac_cv_sizeof_long_long" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
+_ACEOF
+
+
+fi
+
+ac_fn_c_find_intX_t "$LINENO" "8" "ac_cv_c_int8_t"
+case $ac_cv_c_int8_t in #(
+ no|yes) ;; #(
+ *)
+
+cat >>confdefs.h <<_ACEOF
+#define int8_t $ac_cv_c_int8_t
+_ACEOF
+;;
+esac
+
+ac_fn_c_find_intX_t "$LINENO" "16" "ac_cv_c_int16_t"
+case $ac_cv_c_int16_t in #(
+ no|yes) ;; #(
+ *)
+
+cat >>confdefs.h <<_ACEOF
+#define int16_t $ac_cv_c_int16_t
+_ACEOF
+;;
+esac
+
+ac_fn_c_find_intX_t "$LINENO" "32" "ac_cv_c_int32_t"
+case $ac_cv_c_int32_t in #(
+ no|yes) ;; #(
+ *)
+
+cat >>confdefs.h <<_ACEOF
+#define int32_t $ac_cv_c_int32_t
+_ACEOF
+;;
+esac
+
+ac_fn_c_find_intX_t "$LINENO" "64" "ac_cv_c_int64_t"
+case $ac_cv_c_int64_t in #(
+ no|yes) ;; #(
+ *)
+
+cat >>confdefs.h <<_ACEOF
+#define int64_t $ac_cv_c_int64_t
+_ACEOF
+;;
+esac
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for unsigned long long int" >&5
+$as_echo_n "checking for unsigned long long int... " >&6; }
+if ${ac_cv_type_unsigned_long_long_int+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_type_unsigned_long_long_int=yes
+ if test "x${ac_cv_prog_cc_c99-no}" = xno; then
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ /* For now, do not test the preprocessor; as of 2007 there are too many
+ implementations with broken preprocessors. Perhaps this can
+ be revisited in 2012. In the meantime, code should not expect
+ #if to work with literals wider than 32 bits. */
+ /* Test literals. */
+ long long int ll = 9223372036854775807ll;
+ long long int nll = -9223372036854775807LL;
+ unsigned long long int ull = 18446744073709551615ULL;
+ /* Test constant expressions. */
+ typedef int a[((-9223372036854775807LL < 0 && 0 < 9223372036854775807ll)
+ ? 1 : -1)];
+ typedef int b[(18446744073709551615ULL <= (unsigned long long int) -1
+ ? 1 : -1)];
+ int i = 63;
+int
+main ()
+{
+/* Test availability of runtime routines for shift and division. */
+ long long int llmax = 9223372036854775807ll;
+ unsigned long long int ullmax = 18446744073709551615ull;
+ return ((ll << 63) | (ll >> 63) | (ll < i) | (ll > i)
+ | (llmax / ll) | (llmax % ll)
+ | (ull << 63) | (ull >> 63) | (ull << i) | (ull >> i)
+ | (ullmax / ull) | (ullmax % ull));
+ ;
+ return 0;
+}
+
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+
+else
+ ac_cv_type_unsigned_long_long_int=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_unsigned_long_long_int" >&5
+$as_echo "$ac_cv_type_unsigned_long_long_int" >&6; }
+ if test $ac_cv_type_unsigned_long_long_int = yes; then
+
+$as_echo "#define HAVE_UNSIGNED_LONG_LONG_INT 1" >>confdefs.h
+
+ fi
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for long long int" >&5
+$as_echo_n "checking for long long int... " >&6; }
+if ${ac_cv_type_long_long_int+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_type_long_long_int=yes
+ if test "x${ac_cv_prog_cc_c99-no}" = xno; then
+ ac_cv_type_long_long_int=$ac_cv_type_unsigned_long_long_int
+ if test $ac_cv_type_long_long_int = yes; then
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <limits.h>
+ #ifndef LLONG_MAX
+ # define HALF \
+ (1LL << (sizeof (long long int) * CHAR_BIT - 2))
+ # define LLONG_MAX (HALF - 1 + HALF)
+ #endif
+int
+main ()
+{
+long long int n = 1;
+ int i;
+ for (i = 0; ; i++)
+ {
+ long long int m = n << i;
+ if (m >> i != n)
+ return 1;
+ if (LLONG_MAX / 2 < m)
+ break;
+ }
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_run "$LINENO"; then :
+
+else
+ ac_cv_type_long_long_int=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_long_long_int" >&5
+$as_echo "$ac_cv_type_long_long_int" >&6; }
+ if test $ac_cv_type_long_long_int = yes; then
+
+$as_echo "#define HAVE_LONG_LONG_INT 1" >>confdefs.h
+
+ fi
+
+
+
+ ac_fn_cxx_check_type "$LINENO" "intmax_t" "ac_cv_type_intmax_t" "$ac_includes_default"
+if test "x$ac_cv_type_intmax_t" = xyes; then :
+
+$as_echo "#define HAVE_INTMAX_T 1" >>confdefs.h
+
+else
+ test $ac_cv_type_long_long_int = yes \
+ && ac_type='long long int' \
+ || ac_type='long int'
+
+cat >>confdefs.h <<_ACEOF
+#define intmax_t $ac_type
+_ACEOF
+
+fi
+
+
+
+ ac_fn_cxx_check_type "$LINENO" "intptr_t" "ac_cv_type_intptr_t" "$ac_includes_default"
+if test "x$ac_cv_type_intptr_t" = xyes; then :
+
+$as_echo "#define HAVE_INTPTR_T 1" >>confdefs.h
+
+else
+ for ac_type in 'int' 'long int' 'long long int'; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(sizeof (void *) <= sizeof ($ac_type))];
+test_array [0] = 0;
+return test_array [0];
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+cat >>confdefs.h <<_ACEOF
+#define intptr_t $ac_type
+_ACEOF
+
+ ac_type=
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ test -z "$ac_type" && break
+ done
+fi
+
+
+ac_fn_c_find_uintX_t "$LINENO" "8" "ac_cv_c_uint8_t"
+case $ac_cv_c_uint8_t in #(
+ no|yes) ;; #(
+ *)
+
+$as_echo "#define _UINT8_T 1" >>confdefs.h
+
+
+cat >>confdefs.h <<_ACEOF
+#define uint8_t $ac_cv_c_uint8_t
+_ACEOF
+;;
+ esac
+
+ac_fn_c_find_uintX_t "$LINENO" "16" "ac_cv_c_uint16_t"
+case $ac_cv_c_uint16_t in #(
+ no|yes) ;; #(
+ *)
+
+
+cat >>confdefs.h <<_ACEOF
+#define uint16_t $ac_cv_c_uint16_t
+_ACEOF
+;;
+ esac
+
+ac_fn_c_find_uintX_t "$LINENO" "32" "ac_cv_c_uint32_t"
+case $ac_cv_c_uint32_t in #(
+ no|yes) ;; #(
+ *)
+
+$as_echo "#define _UINT32_T 1" >>confdefs.h
+
+
+cat >>confdefs.h <<_ACEOF
+#define uint32_t $ac_cv_c_uint32_t
+_ACEOF
+;;
+ esac
+
+ac_fn_c_find_uintX_t "$LINENO" "64" "ac_cv_c_uint64_t"
+case $ac_cv_c_uint64_t in #(
+ no|yes) ;; #(
+ *)
+
+$as_echo "#define _UINT64_T 1" >>confdefs.h
+
+
+cat >>confdefs.h <<_ACEOF
+#define uint64_t $ac_cv_c_uint64_t
+_ACEOF
+;;
+ esac
+
+
+
+ ac_fn_cxx_check_type "$LINENO" "uintmax_t" "ac_cv_type_uintmax_t" "$ac_includes_default"
+if test "x$ac_cv_type_uintmax_t" = xyes; then :
+
+$as_echo "#define HAVE_UINTMAX_T 1" >>confdefs.h
+
+else
+ test $ac_cv_type_unsigned_long_long_int = yes \
+ && ac_type='unsigned long long int' \
+ || ac_type='unsigned long int'
+
+cat >>confdefs.h <<_ACEOF
+#define uintmax_t $ac_type
+_ACEOF
+
+fi
+
+
+
+ ac_fn_cxx_check_type "$LINENO" "uintptr_t" "ac_cv_type_uintptr_t" "$ac_includes_default"
+if test "x$ac_cv_type_uintptr_t" = xyes; then :
+
+$as_echo "#define HAVE_UINTPTR_T 1" >>confdefs.h
+
+else
+ for ac_type in 'unsigned int' 'unsigned long int' \
+ 'unsigned long long int'; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(sizeof (void *) <= sizeof ($ac_type))];
+test_array [0] = 0;
+return test_array [0];
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+cat >>confdefs.h <<_ACEOF
+#define uintptr_t $ac_type
+_ACEOF
+
+ ac_type=
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ test -z "$ac_type" && break
+ done
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test x"$ac_cv_c_uint64_t" = x"no" -o x"$ac_cv_c_int64_t" = x"no"; then
+ as_fn_error $? "uint64_t or int64_t not found" "$LINENO" 5
+fi
+
+# check what underlying integer type int64_t uses
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for int64_t underlying type" >&5
+$as_echo_n "checking for int64_t underlying type... " >&6; }
+if ${ac_cv_int64_t_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#ifdef HAVE_STDINT_H
+#include <stdint.h>
+#endif
+template <typename T> struct X { };
+template <>
+struct X<long> { typedef long t; };
+
+int
+main ()
+{
+X<int64_t>::t x;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_int64_t_type=long
+else
+ ac_cv_int64_t_type="long long"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_int64_t_type" >&5
+$as_echo "$ac_cv_int64_t_type" >&6; }
+if test "$ac_cv_int64_t_type" = "long"; then
+
+$as_echo "#define INT64_T_IS_LONG 1" >>confdefs.h
+
+else
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#ifdef HAVE_STDINT_H
+#include <stdint.h>
+#endif
+template <typename T> struct X { };
+template <>
+struct X<long long> { typedef long long t; };
+
+int
+main ()
+{
+X<int64_t>::t x;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+else
+ as_fn_error $? "error verifying int64_t uses long long" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for std::swap in <utility>" >&5
+$as_echo_n "checking for std::swap in <utility>... " >&6; }
+if ${ac_cv_std_swap_in_utility+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <utility>
+
+int
+main ()
+{
+int a, b; std::swap(a,b);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_std_swap_in_utility=yes
+else
+ ac_cv_std_swap_in_utility=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_std_swap_in_utility" >&5
+$as_echo "$ac_cv_std_swap_in_utility" >&6; }
+if test $ac_cv_std_swap_in_utility = yes; then
+
+$as_echo "#define HAVE_SWAP_IN_UTILITY 1" >>confdefs.h
+
+fi
+
+# Check whether compiler is affected by placement new aliasing bug (PR 29286).
+# If the host compiler is affected by the bug, and we build with optimization
+# enabled (which happens e.g. when cross-compiling), the pool allocator may
+# get miscompiled. Use -fno-strict-aliasing to work around this problem.
+# Since there is no reliable feature check for the presence of this bug,
+# we simply use a GCC version number check. (This should never trigger for
+# stages 2 or 3 of a native bootstrap.)
+aliasing_flags=
+if test "$GCC" = yes; then
+ saved_CXXFLAGS="$CXXFLAGS"
+
+ # The following test compilation will succeed if and only if $CXX accepts
+ # -fno-strict-aliasing *and* is older than GCC 4.3.
+ CXXFLAGS="$CXXFLAGS -fno-strict-aliasing"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX is affected by placement new aliasing bug" >&5
+$as_echo_n "checking whether $CXX is affected by placement new aliasing bug... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3)
+#error compiler not affected by placement new aliasing bug
+#endif
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }; aliasing_flags='-fno-strict-aliasing'
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+ CXXFLAGS="$saved_CXXFLAGS"
+fi
+
+
+
+
+# ---------------------
+# Warnings and checking
+# ---------------------
+
+# Check $CC warning features (if it's GCC).
+# We want to use -pedantic, but we don't want warnings about
+# * 'long long'
+# * variadic macros
+# * overlong strings
+# * C++11 narrowing conversions in { }
+# So, we only use -pedantic if we can disable those warnings.
+
+# In stage 1, disable -Wformat warnings from old GCCs about new % codes
+# Check whether --enable-build-format-warnings was given.
+if test "${enable_build_format_warnings+set}" = set; then :
+ enableval=$enable_build_format_warnings;
+else
+ enable_build_format_warnings=yes
+fi
+
+if test $enable_build_format_warnings = no; then :
+ wf_opt=-Wno-format
+else
+ wf_opt=
+fi
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+loose_warn=
+save_CXXFLAGS="$CXXFLAGS"
+for real_option in -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual $wf_opt; do
+ # Do the check with the no- prefix removed since gcc silently
+ # accepts any -Wno-* option on purpose
+ case $real_option in
+ -Wno-*) option=-W`expr x$real_option : 'x-Wno-\(.*\)'` ;;
+ *) option=$real_option ;;
+ esac
+ as_acx_Woption=`$as_echo "acx_cv_prog_cc_warning_$option" | $as_tr_sh`
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX supports $option" >&5
+$as_echo_n "checking whether $CXX supports $option... " >&6; }
+if eval \${$as_acx_Woption+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ CXXFLAGS="$option"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ eval "$as_acx_Woption=yes"
+else
+ eval "$as_acx_Woption=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+eval ac_res=\$$as_acx_Woption
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ if test `eval 'as_val=${'$as_acx_Woption'};$as_echo "$as_val"'` = yes; then :
+ loose_warn="$loose_warn${loose_warn:+ }$real_option"
+fi
+ done
+CXXFLAGS="$save_CXXFLAGS"
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+c_loose_warn=
+save_CFLAGS="$CFLAGS"
+for real_option in -Wstrict-prototypes -Wmissing-prototypes ; do
+ # Do the check with the no- prefix removed since gcc silently
+ # accepts any -Wno-* option on purpose
+ case $real_option in
+ -Wno-*) option=-W`expr x$real_option : 'x-Wno-\(.*\)'` ;;
+ *) option=$real_option ;;
+ esac
+ as_acx_Woption=`$as_echo "acx_cv_prog_cc_warning_$option" | $as_tr_sh`
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC supports $option" >&5
+$as_echo_n "checking whether $CC supports $option... " >&6; }
+if eval \${$as_acx_Woption+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ CFLAGS="$option"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$as_acx_Woption=yes"
+else
+ eval "$as_acx_Woption=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+eval ac_res=\$$as_acx_Woption
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ if test `eval 'as_val=${'$as_acx_Woption'};$as_echo "$as_val"'` = yes; then :
+ c_loose_warn="$c_loose_warn${c_loose_warn:+ }$real_option"
+fi
+ done
+CFLAGS="$save_CFLAGS"
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+strict_warn=
+save_CXXFLAGS="$CXXFLAGS"
+for real_option in -Wmissing-format-attribute -Woverloaded-virtual; do
+ # Do the check with the no- prefix removed since gcc silently
+ # accepts any -Wno-* option on purpose
+ case $real_option in
+ -Wno-*) option=-W`expr x$real_option : 'x-Wno-\(.*\)'` ;;
+ *) option=$real_option ;;
+ esac
+ as_acx_Woption=`$as_echo "acx_cv_prog_cc_warning_$option" | $as_tr_sh`
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX supports $option" >&5
+$as_echo_n "checking whether $CXX supports $option... " >&6; }
+if eval \${$as_acx_Woption+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ CXXFLAGS="$option"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ eval "$as_acx_Woption=yes"
+else
+ eval "$as_acx_Woption=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+eval ac_res=\$$as_acx_Woption
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ if test `eval 'as_val=${'$as_acx_Woption'};$as_echo "$as_val"'` = yes; then :
+ strict_warn="$strict_warn${strict_warn:+ }$real_option"
+fi
+ done
+CXXFLAGS="$save_CXXFLAGS"
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+c_strict_warn=
+save_CFLAGS="$CFLAGS"
+for real_option in -Wold-style-definition -Wc++-compat; do
+ # Do the check with the no- prefix removed since gcc silently
+ # accepts any -Wno-* option on purpose
+ case $real_option in
+ -Wno-*) option=-W`expr x$real_option : 'x-Wno-\(.*\)'` ;;
+ *) option=$real_option ;;
+ esac
+ as_acx_Woption=`$as_echo "acx_cv_prog_cc_warning_$option" | $as_tr_sh`
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC supports $option" >&5
+$as_echo_n "checking whether $CC supports $option... " >&6; }
+if eval \${$as_acx_Woption+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ CFLAGS="$option"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$as_acx_Woption=yes"
+else
+ eval "$as_acx_Woption=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+eval ac_res=\$$as_acx_Woption
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ if test `eval 'as_val=${'$as_acx_Woption'};$as_echo "$as_val"'` = yes; then :
+ c_strict_warn="$c_strict_warn${c_strict_warn:+ }$real_option"
+fi
+ done
+CFLAGS="$save_CFLAGS"
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+# Do the check with the no- prefix removed from the warning options
+# since gcc silently accepts any -Wno-* option on purpose
+if test "$GXX" = yes; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX supports -pedantic -Wlong-long -Wvariadic-macros -Woverlength-strings" >&5
+$as_echo_n "checking whether $CXX supports -pedantic -Wlong-long -Wvariadic-macros -Woverlength-strings... " >&6; }
+if ${acx_cv_prog_cc_pedantic__Wlong_long__Wvariadic_macros__Woverlength_strings+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ save_CXXFLAGS="$CXXFLAGS"
+CXXFLAGS="-pedantic -Wlong-long -Wvariadic-macros -Woverlength-strings"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ acx_cv_prog_cc_pedantic__Wlong_long__Wvariadic_macros__Woverlength_strings=yes
+else
+ acx_cv_prog_cc_pedantic__Wlong_long__Wvariadic_macros__Woverlength_strings=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+CXXFLAGS="$save_CXXFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acx_cv_prog_cc_pedantic__Wlong_long__Wvariadic_macros__Woverlength_strings" >&5
+$as_echo "$acx_cv_prog_cc_pedantic__Wlong_long__Wvariadic_macros__Woverlength_strings" >&6; }
+if test $acx_cv_prog_cc_pedantic__Wlong_long__Wvariadic_macros__Woverlength_strings = yes; then :
+ strict_warn="$strict_warn${strict_warn:+ }-pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings"
+fi
+
+fi
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+# Check whether --enable-werror-always was given.
+if test "${enable_werror_always+set}" = set; then :
+ enableval=$enable_werror_always;
+else
+ enable_werror_always=no
+fi
+
+if test $enable_werror_always = yes; then :
+ strict_warn="$strict_warn${strict_warn:+ }-Werror"
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+
+# The above macros do nothing if the compiler is not GCC. However, the
+# Makefile has more goo to add other flags, so these variables are used
+# to enable warnings only for GCC.
+warn_cflags=
+warn_cxxflags=
+if test "x$GCC" = "xyes"; then
+ warn_cflags='$(GCC_WARN_CFLAGS)'
+ warn_cxxflags='$(GCC_WARN_CXXFLAGS)'
+fi
+
+
+
+# Disable exceptions and RTTI if building with g++
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+noexception_flags=
+save_CFLAGS="$CFLAGS"
+for real_option in -fno-exceptions -fno-rtti -fasynchronous-unwind-tables; do
+ # Do the check with the no- prefix removed since gcc silently
+ # accepts any -Wno-* option on purpose
+ case $real_option in
+ -Wno-*) option=-W`expr x$real_option : 'x-Wno-\(.*\)'` ;;
+ *) option=$real_option ;;
+ esac
+ as_acx_Woption=`$as_echo "acx_cv_prog_cc_warning_$option" | $as_tr_sh`
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC supports $option" >&5
+$as_echo_n "checking whether $CC supports $option... " >&6; }
+if eval \${$as_acx_Woption+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ CFLAGS="$option"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$as_acx_Woption=yes"
+else
+ eval "$as_acx_Woption=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+eval ac_res=\$$as_acx_Woption
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ if test `eval 'as_val=${'$as_acx_Woption'};$as_echo "$as_val"'` = yes; then :
+ noexception_flags="$noexception_flags${noexception_flags:+ }$real_option"
+fi
+ done
+CFLAGS="$save_CFLAGS"
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+
+# Enable expensive internal checks
+is_release=
+if test x"`cat $srcdir/DEV-PHASE`" != xexperimental; then
+ is_release=yes
+fi
+
+# Check whether --enable-checking was given.
+if test "${enable_checking+set}" = set; then :
+ enableval=$enable_checking; ac_checking_flags="${enableval}"
+else
+
+# Determine the default checks.
+if test x$is_release = x ; then
+ ac_checking_flags=yes,extra
+else
+ ac_checking_flags=release
+fi
+fi
+
+IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="$IFS,"
+for check in release $ac_checking_flags
+do
+ case $check in
+ # these set all the flags to specific states
+ yes) ac_assert_checking=1 ; ac_checking=1 ; ac_df_checking= ;
+ ac_fold_checking= ; ac_gc_checking=1 ; ac_extra_checking= ;
+ ac_gc_always_collect= ; ac_gimple_checking=1 ; ac_rtl_checking= ;
+ ac_rtlflag_checking=1 ; ac_runtime_checking=1 ;
+ ac_tree_checking=1 ; ac_valgrind_checking= ;
+ ac_types_checking=1 ;;
+ no|none) ac_assert_checking= ; ac_checking= ; ac_df_checking= ;
+ ac_fold_checking= ; ac_gc_checking= ; ac_extra_checking= ;
+ ac_gc_always_collect= ; ac_gimple_checking= ; ac_rtl_checking= ;
+ ac_rtlflag_checking= ; ac_runtime_checking= ;
+ ac_tree_checking= ; ac_valgrind_checking= ;
+ ac_types_checking= ;;
+ all) ac_assert_checking=1 ; ac_checking=1 ; ac_df_checking=1 ;
+ ac_fold_checking=1 ; ac_gc_checking=1 ; ac_extra_checking=1 ;
+ ac_gc_always_collect=1 ; ac_gimple_checking=1 ; ac_rtl_checking=1 ;
+ ac_rtlflag_checking=1 ; ac_runtime_checking=1 ;
+ ac_tree_checking=1 ; ac_valgrind_checking= ;
+ ac_types_checking=1 ;;
+ release) ac_assert_checking=1 ; ac_checking= ; ac_df_checking= ;
+ ac_fold_checking= ; ac_gc_checking= ; ac_extra_checking= ;
+ ac_gc_always_collect= ; ac_gimple_checking= ; ac_rtl_checking= ;
+ ac_rtlflag_checking= ; ac_runtime_checking=1 ;
+ ac_tree_checking= ; ac_valgrind_checking= ;
+ ac_types_checking= ;;
+ # these enable particular checks
+ assert) ac_assert_checking=1 ;;
+ df) ac_df_checking=1 ;;
+ extra) ac_extra_checking=1 ;;
+ fold) ac_fold_checking=1 ;;
+ gc) ac_gc_checking=1 ;;
+ gcac) ac_gc_always_collect=1 ;;
+ gimple) ac_gimple_checking=1 ;;
+ misc) ac_checking=1 ;;
+ rtl) ac_rtl_checking=1 ;;
+ rtlflag) ac_rtlflag_checking=1 ;;
+ runtime) ac_runtime_checking=1 ;;
+ tree) ac_tree_checking=1 ;;
+ types) ac_types_checking=1 ;;
+ valgrind) ac_valgrind_checking=1 ;;
+ *) as_fn_error $? "unknown check category $check" "$LINENO" 5 ;;
+ esac
+done
+IFS="$ac_save_IFS"
+
+nocommon_flag=""
+if test x$ac_checking != x ; then
+
+$as_echo "#define CHECKING_P 1" >>confdefs.h
+
+ nocommon_flag=-fno-common
+else
+ $as_echo "#define CHECKING_P 0" >>confdefs.h
+
+fi
+
+if test x$ac_extra_checking != x ; then
+
+$as_echo "#define ENABLE_EXTRA_CHECKING 1" >>confdefs.h
+
+else
+ $as_echo "#define ENABLE_EXTRA_CHECKING 0" >>confdefs.h
+
+fi
+if test x$ac_df_checking != x ; then
+
+$as_echo "#define ENABLE_DF_CHECKING 1" >>confdefs.h
+
+fi
+if test x$ac_assert_checking != x ; then
+
+$as_echo "#define ENABLE_ASSERT_CHECKING 1" >>confdefs.h
+
+fi
+if test x$ac_gimple_checking != x ; then
+
+$as_echo "#define ENABLE_GIMPLE_CHECKING 1" >>confdefs.h
+
+fi
+
+if test x$ac_runtime_checking != x ; then
+
+$as_echo "#define ENABLE_RUNTIME_CHECKING 1" >>confdefs.h
+
+fi
+if test x$ac_tree_checking != x ; then
+
+$as_echo "#define ENABLE_TREE_CHECKING 1" >>confdefs.h
+
+ TREECHECKING=yes
+fi
+if test x$ac_types_checking != x ; then
+
+$as_echo "#define ENABLE_TYPES_CHECKING 1" >>confdefs.h
+
+fi
+
+if test x$ac_rtl_checking != x ; then
+
+$as_echo "#define ENABLE_RTL_CHECKING 1" >>confdefs.h
+
+fi
+if test x$ac_rtlflag_checking != x ; then
+
+$as_echo "#define ENABLE_RTL_FLAG_CHECKING 1" >>confdefs.h
+
+fi
+if test x$ac_gc_checking != x ; then
+
+$as_echo "#define ENABLE_GC_CHECKING 1" >>confdefs.h
+
+fi
+if test x$ac_gc_always_collect != x ; then
+
+$as_echo "#define ENABLE_GC_ALWAYS_COLLECT 1" >>confdefs.h
+
+fi
+if test x$ac_fold_checking != x ; then
+
+$as_echo "#define ENABLE_FOLD_CHECKING 1" >>confdefs.h
+
+fi
+valgrind_path_defines=
+valgrind_command=
+
+ac_fn_cxx_check_header_mongrel "$LINENO" "valgrind.h" "ac_cv_header_valgrind_h" "$ac_includes_default"
+if test "x$ac_cv_header_valgrind_h" = xyes; then :
+ have_valgrind_h=yes
+else
+ have_valgrind_h=no
+fi
+
+
+
+# It is certainly possible that there's valgrind but no valgrind.h.
+# GCC relies on making annotations so we must have both.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for VALGRIND_DISCARD in <valgrind/memcheck.h>" >&5
+$as_echo_n "checking for VALGRIND_DISCARD in <valgrind/memcheck.h>... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <valgrind/memcheck.h>
+#ifndef VALGRIND_DISCARD
+#error VALGRIND_DISCARD not defined
+#endif
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ gcc_cv_header_valgrind_memcheck_h=yes
+else
+ gcc_cv_header_valgrind_memcheck_h=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_header_valgrind_memcheck_h" >&5
+$as_echo "$gcc_cv_header_valgrind_memcheck_h" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for VALGRIND_DISCARD in <memcheck.h>" >&5
+$as_echo_n "checking for VALGRIND_DISCARD in <memcheck.h>... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <memcheck.h>
+#ifndef VALGRIND_DISCARD
+#error VALGRIND_DISCARD not defined
+#endif
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ gcc_cv_header_memcheck_h=yes
+else
+ gcc_cv_header_memcheck_h=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_header_memcheck_h" >&5
+$as_echo "$gcc_cv_header_memcheck_h" >&6; }
+if test $gcc_cv_header_valgrind_memcheck_h = yes; then
+
+$as_echo "#define HAVE_VALGRIND_MEMCHECK_H 1" >>confdefs.h
+
+fi
+if test $gcc_cv_header_memcheck_h = yes; then
+
+$as_echo "#define HAVE_MEMCHECK_H 1" >>confdefs.h
+
+fi
+
+if test x$ac_valgrind_checking != x ; then
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "valgrind", so it can be a program name with args.
+set dummy valgrind; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_valgrind_path+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case "$valgrind_path" in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_valgrind_path="$valgrind_path" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ if $ac_dir/$ac_word --version | grep valgrind- >/dev/null 2>&1; then
+ ac_cv_path_valgrind_path="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+ ;;
+esac
+fi
+valgrind_path="$ac_cv_path_valgrind_path"
+if test -n "$valgrind_path"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $valgrind_path" >&5
+$as_echo "$valgrind_path" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$valgrind_path" = "x" \
+ || (test $have_valgrind_h = no \
+ && test $gcc_cv_header_memcheck_h = no \
+ && test $gcc_cv_header_valgrind_memcheck_h = no); then
+ as_fn_error $? "*** Can't find both valgrind and valgrind/memcheck.h, memcheck.h or valgrind.h" "$LINENO" 5
+ fi
+ valgrind_path_defines=-DVALGRIND_PATH='\"'$valgrind_path'\"'
+ valgrind_command="$valgrind_path -q"
+
+$as_echo "#define ENABLE_VALGRIND_CHECKING 1" >>confdefs.h
+
+fi
+
+
+
+# Enable code coverage collection
+# Check whether --enable-coverage was given.
+if test "${enable_coverage+set}" = set; then :
+ enableval=$enable_coverage; case "${enableval}" in
+ yes|noopt)
+ coverage_flags="-fprofile-arcs -ftest-coverage -frandom-seed=\$@ -O0 -fkeep-static-functions"
+ ;;
+ opt)
+ coverage_flags="-fprofile-arcs -ftest-coverage -frandom-seed=\$@ -O2 -fkeep-static-functions"
+ ;;
+ no)
+ # a.k.a. --disable-coverage
+ coverage_flags=""
+ ;;
+ *)
+ as_fn_error $? "unknown coverage setting $enableval" "$LINENO" 5
+ ;;
+esac
+else
+ coverage_flags=""
+fi
+
+
+
+# Check whether --enable-gather-detailed-mem-stats was given.
+if test "${enable_gather_detailed_mem_stats+set}" = set; then :
+ enableval=$enable_gather_detailed_mem_stats;
+else
+ enable_gather_detailed_mem_stats=no
+fi
+
+gather_stats=`if test $enable_gather_detailed_mem_stats != no; then echo 1; else echo 0; fi`
+
+cat >>confdefs.h <<_ACEOF
+#define GATHER_STATISTICS $gather_stats
+_ACEOF
+
+
+# Check whether --enable-valgrind-annotations was given.
+if test "${enable_valgrind_annotations+set}" = set; then :
+ enableval=$enable_valgrind_annotations;
+else
+ enable_valgrind_annotations=no
+fi
+
+if test x$enable_valgrind_annotations != xno \
+ || test x$ac_valgrind_checking != x; then
+ if (test $have_valgrind_h = no \
+ && test $gcc_cv_header_memcheck_h = no \
+ && test $gcc_cv_header_valgrind_memcheck_h = no); then
+ as_fn_error $? "*** Can't find valgrind/memcheck.h, memcheck.h or valgrind.h" "$LINENO" 5
+ fi
+
+$as_echo "#define ENABLE_VALGRIND_ANNOTATIONS 1" >>confdefs.h
+
+fi
+
+# -------------------------------
+# Miscenalleous configure options
+# -------------------------------
+
+# Determine whether or not multilibs are enabled.
+# Check whether --enable-multilib was given.
+if test "${enable_multilib+set}" = set; then :
+ enableval=$enable_multilib;
+else
+ enable_multilib=yes
+fi
+
+
+
+# Determine whether or not multiarch is enabled.
+# Check whether --enable-multiarch was given.
+if test "${enable_multiarch+set}" = set; then :
+ enableval=$enable_multiarch; case "${enableval}" in
+yes|no|auto) enable_multiarch=$enableval;;
+*) as_fn_error $? "bad value ${enableval} given for --enable-multiarch option" "$LINENO" 5 ;;
+esac
+else
+ enable_multiarch=auto
+fi
+
+if test x${enable_multiarch} = xauto; then
+ if test x${with_native_system_header_dir} != x; then
+ ma_msg_suffix=", disabled auto check (configured with --native-system-header-dir)"
+ enable_multiarch=no
+ fi
+ if test x$host != x$target && test "x$with_sysroot" = x; then
+ ma_msg_suffix=", disabled auto check (cross build configured without --with-sysroot)"
+ enable_multiarch=no
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for multiarch configuration" >&5
+$as_echo_n "checking for multiarch configuration... " >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_multiarch$ma_msg_suffix" >&5
+$as_echo "$enable_multiarch$ma_msg_suffix" >&6; }
+
+# needed for setting the multiarch name for soft-float/hard-float ABIs
+
+
+
+# default stack clash protection guard size as power of twos in bytes.
+# Please keep these in sync with params.def.
+stk_clash_min=12
+stk_clash_max=30
+
+# Keep the default value when the option is not used to 0, this allows us to
+# distinguish between the cases where the user specifially set a value via
+# configure and when the normal default value is used.
+
+# Check whether --with-stack-clash-protection-guard-size was given.
+if test "${with_stack_clash_protection_guard_size+set}" = set; then :
+ withval=$with_stack_clash_protection_guard_size; DEFAULT_STK_CLASH_GUARD_SIZE="$with_stack_clash_protection_guard_size"
+else
+ DEFAULT_STK_CLASH_GUARD_SIZE=0
+fi
+
+if test $DEFAULT_STK_CLASH_GUARD_SIZE -ne 0 \
+ && (test $DEFAULT_STK_CLASH_GUARD_SIZE -lt $stk_clash_min \
+ || test $DEFAULT_STK_CLASH_GUARD_SIZE -gt $stk_clash_max); then
+ as_fn_error $? "Invalid value $DEFAULT_STK_CLASH_GUARD_SIZE for --with-stack-clash-protection-guard-size. Must be between $stk_clash_min and $stk_clash_max." "$LINENO" 5
+fi
+
+
+cat >>confdefs.h <<_ACEOF
+#define DEFAULT_STK_CLASH_GUARD_SIZE $DEFAULT_STK_CLASH_GUARD_SIZE
+_ACEOF
+
+
+# Enable __cxa_atexit for C++.
+# Check whether --enable-__cxa_atexit was given.
+if test "${enable___cxa_atexit+set}" = set; then :
+ enableval=$enable___cxa_atexit;
+fi
+
+
+# Enable C extension for decimal float if target supports it.
+
+# Check whether --enable-decimal-float was given.
+if test "${enable_decimal_float+set}" = set; then :
+ enableval=$enable_decimal_float;
+ case $enable_decimal_float in
+ yes | no | bid | dpd) default_decimal_float=$enable_decimal_float ;;
+ *) as_fn_error $? "'$enable_decimal_float' is an invalid value for --enable-decimal-float.
+Valid choices are 'yes', 'bid', 'dpd', and 'no'." "$LINENO" 5 ;;
+ esac
+
+else
+
+ case $target in
+ powerpc*-*-linux* | i?86*-*-linux* | x86_64*-*-linux* | s390*-*-linux* | \
+ i?86*-*-elfiamcu | i?86*-*-gnu* | x86_64*-*-gnu* | \
+ i?86*-*-mingw* | x86_64*-*-mingw* | \
+ i?86*-*-cygwin* | x86_64*-*-cygwin*)
+ enable_decimal_float=yes
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: decimal float is not supported for this target, ignored" >&5
+$as_echo "$as_me: WARNING: decimal float is not supported for this target, ignored" >&2;}
+ enable_decimal_float=no
+ ;;
+ esac
+
+fi
+
+
+# x86's use BID format instead of DPD
+case x$enable_decimal_float in
+ xyes)
+ case $target in
+ i?86*-*-* | x86_64*-*-*)
+ enable_decimal_float=bid
+ ;;
+ *)
+ enable_decimal_float=dpd
+ ;;
+ esac
+ default_decimal_float=$enable_decimal_float
+ ;;
+ xno)
+ # ENABLE_DECIMAL_FLOAT is set to 0. But we have to have proper
+ # dependency on libdecnumber.
+ default_decimal_float=dpd
+ ;;
+esac
+
+
+
+
+dfp=`if test $enable_decimal_float != no; then echo 1; else echo 0; fi`
+
+cat >>confdefs.h <<_ACEOF
+#define ENABLE_DECIMAL_FLOAT $dfp
+_ACEOF
+
+
+# Use default_decimal_float for dependency.
+enable_decimal_float=$default_decimal_float
+
+bid=`if test $enable_decimal_float = bid; then echo 1; else echo 0; fi`
+
+cat >>confdefs.h <<_ACEOF
+#define ENABLE_DECIMAL_BID_FORMAT $bid
+_ACEOF
+
+
+# Enable C extension for fixed-point arithmetic.
+# Check whether --enable-fixed-point was given.
+if test "${enable_fixed_point+set}" = set; then :
+ enableval=$enable_fixed_point;
+else
+
+ case $target in
+ arm*)
+ enable_fixed_point=yes
+ ;;
+
+ mips*-*-*)
+ enable_fixed_point=yes
+ ;;
+ loongarch*-*-*)
+ enable_fixed_point=yes
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: fixed-point is not supported for this target, ignored" >&5
+$as_echo "$as_me: WARNING: fixed-point is not supported for this target, ignored" >&2;}
+ enable_fixed_point=no
+ ;;
+ esac
+
+fi
+
+
+
+fixedpoint=`if test $enable_fixed_point = yes; then echo 1; else echo 0; fi`
+
+cat >>confdefs.h <<_ACEOF
+#define ENABLE_FIXED_POINT $fixedpoint
+_ACEOF
+
+
+# Enable threads
+# Pass with no value to take the default
+# Pass with a value to specify a thread package
+# Check whether --enable-threads was given.
+if test "${enable_threads+set}" = set; then :
+ enableval=$enable_threads;
+else
+ enable_threads=''
+fi
+
+
+# Check whether --enable-tls was given.
+if test "${enable_tls+set}" = set; then :
+ enableval=$enable_tls;
+ case $enable_tls in
+ yes | no) ;;
+ *) as_fn_error $? "'$enable_tls' is an invalid value for --enable-tls.
+Valid choices are 'yes' and 'no'." "$LINENO" 5 ;;
+ esac
+
+else
+ enable_tls=''
+fi
+
+
+# Check whether --enable-vtable-verify was given.
+if test "${enable_vtable_verify+set}" = set; then :
+ enableval=$enable_vtable_verify;
+else
+ enable_vtable_verify=no
+fi
+
+vtable_verify=`if test x$enable_vtable_verify = xyes; then echo 1; else echo 0; fi`
+
+cat >>confdefs.h <<_ACEOF
+#define ENABLE_VTABLE_VERIFY $vtable_verify
+_ACEOF
+
+
+# Check whether --enable-analyzer was given.
+if test "${enable_analyzer+set}" = set; then :
+ enableval=$enable_analyzer; if test x$enable_analyzer = xno; then
+ analyzer=0
+else
+ analyzer=1
+fi
+else
+ analyzer=1
+fi
+
+
+cat >>confdefs.h <<_ACEOF
+#define ENABLE_ANALYZER $analyzer
+_ACEOF
+
+
+# Check whether --enable-objc-gc was given.
+if test "${enable_objc_gc+set}" = set; then :
+ enableval=$enable_objc_gc; if test x$enable_objc_gc = xno; then
+ objc_boehm_gc=''
+else
+ objc_boehm_gc=1
+fi
+else
+ objc_boehm_gc=''
+fi
+
+
+
+# Check whether --with-dwarf2 was given.
+if test "${with_dwarf2+set}" = set; then :
+ withval=$with_dwarf2; dwarf2="$with_dwarf2"
+else
+ dwarf2=no
+fi
+
+
+# Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+ enableval=$enable_shared;
+ case $enable_shared in
+ yes | no) ;;
+ *)
+ enable_shared=no
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "Xgcc" || test "X$pkg" = "Xlibgcc"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+ esac
+
+else
+ enable_shared=yes
+fi
+
+
+
+# Check whether --enable-gcov was given.
+if test "${enable_gcov+set}" = set; then :
+ enableval=$enable_gcov;
+else
+ case $target in
+ bpf-*-*)
+ enable_gcov=no
+ ;;
+ *)
+ enable_gcov=yes
+ ;;
+ esac
+fi
+
+
+
+
+
+# Check whether --with-specs was given.
+if test "${with_specs+set}" = set; then :
+ withval=$with_specs; CONFIGURE_SPECS=$withval
+else
+ CONFIGURE_SPECS=
+
+fi
+
+
+
+
+
+# Check whether --with-pkgversion was given.
+if test "${with_pkgversion+set}" = set; then :
+ withval=$with_pkgversion; case "$withval" in
+ yes) as_fn_error $? "package version not specified" "$LINENO" 5 ;;
+ no) PKGVERSION= ;;
+ *) PKGVERSION="($withval) " ;;
+ esac
+else
+ PKGVERSION="(GCC) "
+
+fi
+
+
+
+
+
+# Check whether --with-bugurl was given.
+if test "${with_bugurl+set}" = set; then :
+ withval=$with_bugurl; case "$withval" in
+ yes) as_fn_error $? "bug URL not specified" "$LINENO" 5 ;;
+ no) BUGURL=
+ ;;
+ *) BUGURL="$withval"
+ ;;
+ esac
+else
+ BUGURL="https://gcc.gnu.org/bugs/"
+
+fi
+
+ case ${BUGURL} in
+ "")
+ REPORT_BUGS_TO=
+ REPORT_BUGS_TEXI=
+ ;;
+ *)
+ REPORT_BUGS_TO="<$BUGURL>"
+ REPORT_BUGS_TEXI=@uref{`echo "$BUGURL" | sed 's/@/@@/g'`}
+ ;;
+ esac;
+
+
+
+
+# Allow overriding the default URL for documentation
+
+# Check whether --with-documentation-root-url was given.
+if test "${with_documentation_root_url+set}" = set; then :
+ withval=$with_documentation_root_url; case "$withval" in
+ yes) as_fn_error $? "documentation root URL not specified" "$LINENO" 5 ;;
+ no) as_fn_error $? "documentation root URL not specified" "$LINENO" 5 ;;
+ */) DOCUMENTATION_ROOT_URL="$withval" ;;
+ *) as_fn_error $? "documentation root URL does not end with /" "$LINENO" 5 ;;
+ esac
+else
+ DOCUMENTATION_ROOT_URL="https://gcc.gnu.org/onlinedocs/"
+
+fi
+
+
+cat >>confdefs.h <<_ACEOF
+#define DOCUMENTATION_ROOT_URL "$DOCUMENTATION_ROOT_URL"
+_ACEOF
+
+
+# Allow overriding the default URL for GCC changes
+
+# Check whether --with-changes-root-url was given.
+if test "${with_changes_root_url+set}" = set; then :
+ withval=$with_changes_root_url; case "$withval" in
+ yes) as_fn_error $? "changes root URL not specified" "$LINENO" 5 ;;
+ no) as_fn_error $? "changes root URL not specified" "$LINENO" 5 ;;
+ */) CHANGES_ROOT_URL="$withval" ;;
+ *) as_fn_error $? "changes root URL does not end with /" "$LINENO" 5 ;;
+ esac
+else
+ CHANGES_ROOT_URL="https://gcc.gnu.org/"
+
+fi
+
+
+cat >>confdefs.h <<_ACEOF
+#define CHANGES_ROOT_URL "$CHANGES_ROOT_URL"
+_ACEOF
+
+
+# Sanity check enable_languages in case someone does not run the toplevel
+# configure # script.
+# Check whether --enable-languages was given.
+if test "${enable_languages+set}" = set; then :
+ enableval=$enable_languages; case ,${enable_languages}, in
+ ,,|,yes,)
+ # go safe -- we cannot be much sure without the toplevel
+ # configure's
+ # analysis of which target libs are present and usable
+ enable_languages=c
+ ;;
+ *,all,*)
+ as_fn_error $? "only the toplevel supports --enable-languages=all" "$LINENO" 5
+ ;;
+ *,c,*)
+ ;;
+ *)
+ enable_languages=c,${enable_languages}
+ ;;
+esac
+else
+ enable_languages=c
+fi
+
+
+# If top-level libada has been disabled, then wire in install-gnatlib
+# invocation with `make install', so that one can build and install
+# the library manually with `make -C gcc all gnatlib gnattools install'.
+if test x"$enable_libada" = xno; then
+ gnat_install_lib=gnat-install-lib
+else
+ gnat_install_lib=
+fi
+
+
+if test x"$enable_as_accelerator_for" != x; then
+
+$as_echo "#define ACCEL_COMPILER 1" >>confdefs.h
+
+ enable_as_accelerator=yes
+ case "${target}" in
+ *-intelmicemul-*)
+ # In this case we expect offload compiler to be built as native, so we
+ # need to rename the driver to avoid clashes with host's drivers.
+ program_transform_name="s&^&${target}-&" ;;
+ esac
+ sedscript="s#${target_noncanonical}#${enable_as_accelerator_for}-accel-${target_noncanonical}#"
+ program_transform_name=`echo $program_transform_name | sed $sedscript`
+ accel_dir_suffix=/accel/${target_noncanonical}
+ real_target_noncanonical=${enable_as_accelerator_for}
+fi
+
+
+
+
+for tgt in `echo $enable_offload_targets | sed 's/,/ /g'`; do
+ tgt=`echo $tgt | sed 's/=.*//'`
+
+ enable_offloading=1
+ case "$tgt" in
+ *-intelmic-* | *-intelmicemul-*)
+ omp_device_property=omp-device-properties-i386
+ omp_device_property_tmake_file="${omp_device_property_tmake_file} \$(srcdir)/config/i386/t-omp-device"
+ ;;
+ amdgcn*)
+ omp_device_property=omp-device-properties-gcn
+ omp_device_property_tmake_file="${omp_device_property_tmake_file} \$(srcdir)/config/gcn/t-omp-device"
+ ;;
+ nvptx*)
+ omp_device_property=omp-device-properties-nvptx
+ omp_device_property_tmake_file="${omp_device_property_tmake_file} \$(srcdir)/config/nvptx/t-omp-device"
+ ;;
+ *)
+ as_fn_error $? "unknown offload target specified" "$LINENO" 5
+ ;;
+ esac
+ omp_device_properties="${omp_device_properties} ${tgt}=${omp_device_property}"
+ omp_device_property_deps="${omp_device_property_deps} ${omp_device_property}"
+
+ if test x"$offload_targets" = x; then
+ offload_targets=$tgt
+ else
+ offload_targets="$offload_targets,$tgt"
+ fi
+done
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define OFFLOAD_TARGETS "$offload_targets"
+_ACEOF
+
+if test x"$enable_offloading" != x; then
+
+$as_echo "#define ENABLE_OFFLOADING 1" >>confdefs.h
+
+else
+
+$as_echo "#define ENABLE_OFFLOADING 0" >>confdefs.h
+
+fi
+
+if test "x$enable_offload_defaulted" = xyes; then
+
+$as_echo "#define OFFLOAD_DEFAULTED 1" >>confdefs.h
+
+fi
+
+
+# Check whether --with-multilib-list was given.
+if test "${with_multilib_list+set}" = set; then :
+ withval=$with_multilib_list; :
+else
+ with_multilib_list=default
+fi
+
+
+
+# Check whether --with-multilib-generator was given.
+if test "${with_multilib_generator+set}" = set; then :
+ withval=$with_multilib_generator; :
+else
+ with_multilib_generator=default
+fi
+
+# Check whether --with-extra-multilibs was given.
+if test "${with_extra_multilibs+set}" = set; then :
+ withval=$with_extra_multilibs; :
+else
+ with_extra_multilibs=default
+fi
+
+# -------------------------
+# Checks for other programs
+# -------------------------
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ SET_MAKE=
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+
+# Find some useful tools
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AWK="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+# We need awk to create options.cc and options.h.
+# Bail out if it's missing.
+case ${AWK} in
+ "") as_fn_error $? "can't build without awk, bailing out" "$LINENO" 5 ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+if ${gcc_cv_prog_LN_S+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ rm -f conftestdata_t
+echo >conftestdata_f
+if ln -s conftestdata_f conftestdata_t 2>/dev/null
+then
+ gcc_cv_prog_LN_S="ln -s"
+else
+ if ln conftestdata_f conftestdata_t 2>/dev/null
+ then
+ gcc_cv_prog_LN_S=ln
+ else
+ if cp -p conftestdata_f conftestdata_t 2>/dev/null
+ then
+ gcc_cv_prog_LN_S="cp -p"
+ else
+ gcc_cv_prog_LN_S=cp
+ fi
+ fi
+fi
+rm -f conftestdata_f conftestdata_t
+
+fi
+LN_S="$gcc_cv_prog_LN_S"
+if test "$gcc_cv_prog_LN_S" = "ln -s"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ if test "$gcc_cv_prog_LN_S" = "ln"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using ln" >&5
+$as_echo "no, using ln" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, and neither does ln, so using $gcc_cv_prog_LN_S" >&5
+$as_echo "no, and neither does ln, so using $gcc_cv_prog_LN_S" >&6; }
+ fi
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln works" >&5
+$as_echo_n "checking whether ln works... " >&6; }
+if ${acx_cv_prog_LN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ rm -f conftestdata_t
+echo >conftestdata_f
+if ln conftestdata_f conftestdata_t 2>/dev/null
+then
+ acx_cv_prog_LN=ln
+else
+ acx_cv_prog_LN=no
+fi
+rm -f conftestdata_f conftestdata_t
+
+fi
+if test $acx_cv_prog_LN = no; then
+ LN="$LN_S"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN" >&5
+$as_echo "no, using $LN" >&6; }
+else
+ LN="$acx_cv_prog_LN"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ RANLIB=$ac_ct_RANLIB
+ fi
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+ranlib_flags=""
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD compatible install" >&5
+$as_echo_n "checking for a BSD compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ # OSF/1 installbsd also uses dspmsg, but is usable.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+# See if cmp has --ignore-initial.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for cmp's capabilities" >&5
+$as_echo_n "checking for cmp's capabilities... " >&6; }
+if ${gcc_cv_prog_cmp_skip+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ echo abfoo >t1
+ echo cdfoo >t2
+ gcc_cv_prog_cmp_skip=slowcompare
+ if cmp --ignore-initial=2 t1 t2 > /dev/null 2>&1; then
+ if cmp --ignore-initial=1 t1 t2 > /dev/null 2>&1; then
+ :
+ else
+ gcc_cv_prog_cmp_skip=gnucompare
+ fi
+ fi
+ if test $gcc_cv_prog_cmp_skip = slowcompare ; then
+ if cmp t1 t2 2 2 > /dev/null 2>&1; then
+ if cmp t1 t2 1 1 > /dev/null 2>&1; then
+ :
+ else
+ gcc_cv_prog_cmp_skip=fastcompare
+ fi
+ fi
+ fi
+ rm t1 t2
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_prog_cmp_skip" >&5
+$as_echo "$gcc_cv_prog_cmp_skip" >&6; }
+make_compare_target=$gcc_cv_prog_cmp_skip
+
+
+
+# See if we have the mktemp command.
+# Extract the first word of "mktemp", so it can be a program name with args.
+set dummy mktemp; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_have_mktemp_command+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$have_mktemp_command"; then
+ ac_cv_prog_have_mktemp_command="$have_mktemp_command" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_have_mktemp_command="yes"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ test -z "$ac_cv_prog_have_mktemp_command" && ac_cv_prog_have_mktemp_command="no"
+fi
+fi
+have_mktemp_command=$ac_cv_prog_have_mktemp_command
+if test -n "$have_mktemp_command"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_mktemp_command" >&5
+$as_echo "$have_mktemp_command" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+# See if makeinfo has been installed and is modern enough
+# that we can use it.
+
+ # Extract the first word of "makeinfo", so it can be a program name with args.
+set dummy makeinfo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MAKEINFO+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$MAKEINFO"; then
+ ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_MAKEINFO="makeinfo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+MAKEINFO=$ac_cv_prog_MAKEINFO
+if test -n "$MAKEINFO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAKEINFO" >&5
+$as_echo "$MAKEINFO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test -n "$MAKEINFO"; then
+ # Found it, now check the version.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for modern makeinfo" >&5
+$as_echo_n "checking for modern makeinfo... " >&6; }
+if ${gcc_cv_prog_makeinfo_modern+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_prog_version=`eval $MAKEINFO --version 2>&1 |
+ sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'`
+
+ case $ac_prog_version in
+ '') gcc_cv_prog_makeinfo_modern=no;;
+ 4.[7-9]*|4.[1-9][0-9]*|[5-9]*|[1-9][0-9]*) gcc_cv_prog_makeinfo_modern=yes;;
+ *) gcc_cv_prog_makeinfo_modern=no;;
+ esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_prog_makeinfo_modern" >&5
+$as_echo "$gcc_cv_prog_makeinfo_modern" >&6; }
+ else
+ gcc_cv_prog_makeinfo_modern=no
+ fi
+ if test $gcc_cv_prog_makeinfo_modern = no; then
+ MAKEINFO="${CONFIG_SHELL-/bin/sh} $ac_aux_dir/missing makeinfo"
+ fi
+
+if test $gcc_cv_prog_makeinfo_modern = no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING:
+*** Makeinfo is missing or too old.
+*** Info documentation will not be built." >&5
+$as_echo "$as_me: WARNING:
+*** Makeinfo is missing or too old.
+*** Info documentation will not be built." >&2;}
+ BUILD_INFO=
+else
+ BUILD_INFO=info
+fi
+
+
+# Is pod2man recent enough to regenerate manpages?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for recent Pod::Man" >&5
+$as_echo_n "checking for recent Pod::Man... " >&6; }
+if (perl -e 'use 1.10 Pod::Man') >/dev/null 2>&1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ GENERATED_MANPAGES=generated-manpages
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ GENERATED_MANPAGES=
+fi
+
+
+MISSING="${CONFIG_SHELL-/bin/sh} $ac_aux_dir/missing"
+
+# How about lex?
+for ac_prog in flex
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_FLEX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$FLEX"; then
+ ac_cv_prog_FLEX="$FLEX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_FLEX="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+FLEX=$ac_cv_prog_FLEX
+if test -n "$FLEX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FLEX" >&5
+$as_echo "$FLEX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$FLEX" && break
+done
+test -n "$FLEX" || FLEX="$MISSING flex"
+
+
+# Bison?
+for ac_prog in bison
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_BISON+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$BISON"; then
+ ac_cv_prog_BISON="$BISON" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_BISON="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+BISON=$ac_cv_prog_BISON
+if test -n "$BISON"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BISON" >&5
+$as_echo "$BISON" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$BISON" && break
+done
+test -n "$BISON" || BISON="$MISSING bison"
+
+
+# Binutils are not build modules, unlike bison/flex/makeinfo. So we
+# check for build == host before using them.
+
+# NM
+if test x${build} = x${host} && test -f $srcdir/../binutils/nm.c \
+ && test -d ../binutils ; then
+ NM='${objdir}/../binutils/nm-new'
+else
+ # Extract the first word of "nm", so it can be a program name with args.
+set dummy nm; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NM+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NM"; then
+ ac_cv_prog_NM="$NM" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NM="nm"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ test -z "$ac_cv_prog_NM" && ac_cv_prog_NM="${CONFIG_SHELL-/bin/sh} ${srcdir}/../missing nm"
+fi
+fi
+NM=$ac_cv_prog_NM
+if test -n "$NM"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM" >&5
+$as_echo "$NM" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+
+# AR
+if test x${build} = x${host} && test -f $srcdir/../binutils/ar.c \
+ && test -d ../binutils ; then
+ AR='${objdir}/../binutils/ar'
+else
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="ar"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="${CONFIG_SHELL-/bin/sh} ${srcdir}/../missing ar"
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+
+# The jit documentation looks better if built with sphinx, but can be
+# built with texinfo if sphinx is not available.
+# Set "doc_build_sys" to "sphinx" or "texinfo" accordingly.
+# Extract the first word of "sphinx-build", so it can be a program name with args.
+set dummy sphinx-build; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_doc_build_sys+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$doc_build_sys"; then
+ ac_cv_prog_doc_build_sys="$doc_build_sys" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_doc_build_sys="sphinx"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ test -z "$ac_cv_prog_doc_build_sys" && ac_cv_prog_doc_build_sys="texinfo"
+fi
+fi
+doc_build_sys=$ac_cv_prog_doc_build_sys
+if test -n "$doc_build_sys"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $doc_build_sys" >&5
+$as_echo "$doc_build_sys" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+# --------------------
+# Checks for C headers
+# --------------------
+
+# Need to reject headers which give warnings, so that the -Werror bootstrap
+# works later. *sigh* This needs to come before all header checks.
+
+ac_c_preproc_warn_flag=yes
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_run "$LINENO"; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5
+$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; }
+if ${ac_cv_header_time+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/time.h>
+#include <time.h>
+
+int
+main ()
+{
+if ((struct tm *) 0)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_header_time=yes
+else
+ ac_cv_header_time=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5
+$as_echo "$ac_cv_header_time" >&6; }
+if test $ac_cv_header_time = yes; then
+
+$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether string.h and strings.h may both be included" >&5
+$as_echo_n "checking whether string.h and strings.h may both be included... " >&6; }
+if ${gcc_cv_header_string+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+#include <strings.h>
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ gcc_cv_header_string=yes
+else
+ gcc_cv_header_string=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_header_string" >&5
+$as_echo "$gcc_cv_header_string" >&6; }
+if test $gcc_cv_header_string = yes; then
+
+$as_echo "#define STRING_WITH_STRINGS 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sys/wait.h that is POSIX.1 compatible" >&5
+$as_echo_n "checking for sys/wait.h that is POSIX.1 compatible... " >&6; }
+if ${ac_cv_header_sys_wait_h+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/wait.h>
+#ifndef WEXITSTATUS
+# define WEXITSTATUS(stat_val) ((unsigned int) (stat_val) >> 8)
+#endif
+#ifndef WIFEXITED
+# define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
+#endif
+
+int
+main ()
+{
+ int s;
+ wait (&s);
+ s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_header_sys_wait_h=yes
+else
+ ac_cv_header_sys_wait_h=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_sys_wait_h" >&5
+$as_echo "$ac_cv_header_sys_wait_h" >&6; }
+if test $ac_cv_header_sys_wait_h = yes; then
+
+$as_echo "#define HAVE_SYS_WAIT_H 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether termios.h defines TIOCGWINSZ" >&5
+$as_echo_n "checking whether termios.h defines TIOCGWINSZ... " >&6; }
+if ${ac_cv_sys_tiocgwinsz_in_termios_h+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <termios.h>
+#ifdef TIOCGWINSZ
+ yes
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "yes" >/dev/null 2>&1; then :
+ ac_cv_sys_tiocgwinsz_in_termios_h=yes
+else
+ ac_cv_sys_tiocgwinsz_in_termios_h=no
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_tiocgwinsz_in_termios_h" >&5
+$as_echo "$ac_cv_sys_tiocgwinsz_in_termios_h" >&6; }
+
+if test $ac_cv_sys_tiocgwinsz_in_termios_h != yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether sys/ioctl.h defines TIOCGWINSZ" >&5
+$as_echo_n "checking whether sys/ioctl.h defines TIOCGWINSZ... " >&6; }
+if ${ac_cv_sys_tiocgwinsz_in_sys_ioctl_h+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/ioctl.h>
+#ifdef TIOCGWINSZ
+ yes
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "yes" >/dev/null 2>&1; then :
+ ac_cv_sys_tiocgwinsz_in_sys_ioctl_h=yes
+else
+ ac_cv_sys_tiocgwinsz_in_sys_ioctl_h=no
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_tiocgwinsz_in_sys_ioctl_h" >&5
+$as_echo "$ac_cv_sys_tiocgwinsz_in_sys_ioctl_h" >&6; }
+
+ if test $ac_cv_sys_tiocgwinsz_in_sys_ioctl_h = yes; then
+
+$as_echo "#define GWINSZ_IN_SYS_IOCTL 1" >>confdefs.h
+
+ fi
+fi
+
+for ac_header in limits.h stddef.h string.h strings.h stdlib.h time.h iconv.h \
+ fcntl.h ftw.h unistd.h sys/file.h sys/time.h sys/mman.h \
+ sys/resource.h sys/param.h sys/times.h sys/stat.h sys/locking.h \
+ direct.h malloc.h langinfo.h ldfcn.h locale.h wchar.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_cxx_check_header_preproc "$LINENO" "$ac_header" "$as_ac_Header"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+# Check for thread headers.
+ac_fn_cxx_check_header_preproc "$LINENO" "thread.h" "ac_cv_header_thread_h"
+if test "x$ac_cv_header_thread_h" = xyes; then :
+ have_thread_h=yes
+else
+ have_thread_h=
+fi
+
+ac_fn_cxx_check_header_preproc "$LINENO" "pthread.h" "ac_cv_header_pthread_h"
+if test "x$ac_cv_header_pthread_h" = xyes; then :
+ have_pthread_h=yes
+else
+ have_pthread_h=
+fi
+
+
+# These tests can't be done till we know if we have limits.h.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for CHAR_BIT" >&5
+$as_echo_n "checking for CHAR_BIT... " >&6; }
+if ${gcc_cv_decl_char_bit+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef HAVE_LIMITS_H
+#include <limits.h>
+#endif
+#ifdef CHAR_BIT
+found
+#endif
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "found" >/dev/null 2>&1; then :
+ gcc_cv_decl_char_bit=yes
+else
+ gcc_cv_decl_char_bit=no
+fi
+rm -f conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_decl_char_bit" >&5
+$as_echo "$gcc_cv_decl_char_bit" >&6; }
+if test $gcc_cv_decl_char_bit = no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking number of bits in a byte" >&5
+$as_echo_n "checking number of bits in a byte... " >&6; }
+if ${gcc_cv_c_nbby+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ i=8
+ gcc_cv_c_nbby=
+ while test $i -lt 65; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+switch(0) {
+ case (unsigned char)((unsigned long)1 << $i) == ((unsigned long)1 << $i):
+ case (unsigned char)((unsigned long)1<<($i-1)) == ((unsigned long)1<<($i-1)):
+ ; }
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ gcc_cv_c_nbby=$i; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ i=`expr $i + 1`
+ done
+ test -z "$gcc_cv_c_nbby" && gcc_cv_c_nbby=failed
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_c_nbby" >&5
+$as_echo "$gcc_cv_c_nbby" >&6; }
+if test $gcc_cv_c_nbby = failed; then
+ as_fn_error $? "cannot determine number of bits in a byte" "$LINENO" 5
+else
+
+cat >>confdefs.h <<_ACEOF
+#define CHAR_BIT $gcc_cv_c_nbby
+_ACEOF
+
+fi
+fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
+$as_echo_n "checking whether byte ordering is bigendian... " >&6; }
+if ${ac_cv_c_bigendian+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_c_bigendian=unknown
+ # See if we're dealing with a universal compiler.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifndef __APPLE_CC__
+ not a universal capable compiler
+ #endif
+ typedef int dummy;
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+ # Check for potential -arch flags. It is not universal unless
+ # there are at least two -arch flags with different values.
+ ac_arch=
+ ac_prev=
+ for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do
+ if test -n "$ac_prev"; then
+ case $ac_word in
+ i?86 | x86_64 | ppc | ppc64)
+ if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then
+ ac_arch=$ac_word
+ else
+ ac_cv_c_bigendian=universal
+ break
+ fi
+ ;;
+ esac
+ ac_prev=
+ elif test "x$ac_word" = "x-arch"; then
+ ac_prev=arch
+ fi
+ done
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ if test $ac_cv_c_bigendian = unknown; then
+ # See if sys/param.h defines the BYTE_ORDER macro.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ #include <sys/param.h>
+
+int
+main ()
+{
+#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \
+ && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \
+ && LITTLE_ENDIAN)
+ bogus endian macros
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ # It does; now see whether it defined to BIG_ENDIAN or not.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ #include <sys/param.h>
+
+int
+main ()
+{
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_c_bigendian=yes
+else
+ ac_cv_c_bigendian=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+ if test $ac_cv_c_bigendian = unknown; then
+ # See if <limits.h> defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris).
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <limits.h>
+
+int
+main ()
+{
+#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN)
+ bogus endian macros
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ # It does; now see whether it defined to _BIG_ENDIAN or not.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <limits.h>
+
+int
+main ()
+{
+#ifndef _BIG_ENDIAN
+ not big endian
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_c_bigendian=yes
+else
+ ac_cv_c_bigendian=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+ if test $ac_cv_c_bigendian = unknown; then
+ # Compile a test program.
+ if test "$cross_compiling" = yes; then :
+ # Try to guess by grepping values from an object file.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+short int ascii_mm[] =
+ { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
+ short int ascii_ii[] =
+ { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
+ int use_ascii (int i) {
+ return ascii_mm[i] + ascii_ii[i];
+ }
+ short int ebcdic_ii[] =
+ { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
+ short int ebcdic_mm[] =
+ { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
+ int use_ebcdic (int i) {
+ return ebcdic_mm[i] + ebcdic_ii[i];
+ }
+ extern int foo;
+
+int
+main ()
+{
+return use_ascii (foo) == use_ebcdic (foo);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then
+ ac_cv_c_bigendian=yes
+ fi
+ if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
+ if test "$ac_cv_c_bigendian" = unknown; then
+ ac_cv_c_bigendian=no
+ else
+ # finding both strings is unlikely to happen, but who knows?
+ ac_cv_c_bigendian=unknown
+ fi
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+
+ /* Are we little or big endian? From Harbison&Steele. */
+ union
+ {
+ long int l;
+ char c[sizeof (long int)];
+ } u;
+ u.l = 1;
+ return u.c[sizeof (long int) - 1] == 1;
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_run "$LINENO"; then :
+ ac_cv_c_bigendian=no
+else
+ ac_cv_c_bigendian=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5
+$as_echo "$ac_cv_c_bigendian" >&6; }
+ case $ac_cv_c_bigendian in #(
+ yes)
+ $as_echo "#define WORDS_BIGENDIAN 1" >>confdefs.h
+;; #(
+ no)
+ ;; #(
+ universal)
+
+$as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
+
+ ;; #(
+ *)
+ as_fn_error $? "unknown endianness
+ presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
+ esac
+
+
+# ----------------------
+# Checks for C++ headers
+# ----------------------
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
+$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
+if test -z "$CXXCPP"; then
+ if ${ac_cv_prog_CXXCPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CXXCPP needs to be expanded
+ for CXXCPP in "$CXX -E" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+ CXXCPP=$ac_cv_prog_CXXCPP
+else
+ ac_cv_prog_CXXCPP=$CXXCPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
+$as_echo "$CXXCPP" >&6; }
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details" >&5
+$as_echo "$as_me: WARNING: C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details" >&2;}; }
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+for ac_header in unordered_map
+do :
+ ac_fn_cxx_check_header_preproc "$LINENO" "unordered_map" "ac_cv_header_unordered_map"
+if test "x$ac_cv_header_unordered_map" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_UNORDERED_MAP 1
+_ACEOF
+
+fi
+done
+
+for ac_header in tr1/unordered_map
+do :
+ ac_fn_cxx_check_header_preproc "$LINENO" "tr1/unordered_map" "ac_cv_header_tr1_unordered_map"
+if test "x$ac_cv_header_tr1_unordered_map" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_TR1_UNORDERED_MAP 1
+_ACEOF
+
+fi
+done
+
+for ac_header in ext/hash_map
+do :
+ ac_fn_cxx_check_header_preproc "$LINENO" "ext/hash_map" "ac_cv_header_ext_hash_map"
+if test "x$ac_cv_header_ext_hash_map" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_EXT_HASH_MAP 1
+_ACEOF
+
+fi
+done
+
+
+# --------
+# Dependency checking.
+# --------
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depdir"
+
+
+ac_config_commands="$ac_config_commands gccdepdir"
+
+
+depcc="$CXX" am_compiler_list=
+
+am_depcomp=$ac_aux_dir/depcomp
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CXX_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CXX_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ if test $depmode = none; then break; fi
+
+ $as_echo "$as_me:$LINENO: trying $depmode" >&5
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "include sub/conftest.Po" > confmf
+
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ depcmd="depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c"
+ echo "| $depcmd" | sed -e 's/ */ /g' >&5
+ if env $depcmd > conftest.err 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po >>conftest.err 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po >>conftest.err 2>&1 &&
+ ${MAKE-make} -s -f confmf >>conftest.err 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CXX_dependencies_compiler_type=$depmode
+ $as_echo "$as_me:$LINENO: success" >&5
+ break
+ fi
+ fi
+ $as_echo "$as_me:$LINENO: failure, diagnostics are:" >&5
+ sed -e 's/^/| /' < conftest.err >&5
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CXX_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
+if test x${am_cv_CXX_dependencies_compiler_type-none} = xnone
+then as_fn_error $? "no usable dependency style found" "$LINENO" 5
+else CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
+
+fi
+
+
+# --------
+# UNSORTED
+# --------
+
+
+# These libraries may be used by collect2.
+# We may need a special search path to get them linked.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for collect2 libraries" >&5
+$as_echo_n "checking for collect2 libraries... " >&6; }
+if ${gcc_cv_collect2_libs+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ save_LIBS="$LIBS"
+for libs in '' -lld -lmld \
+ '-L/usr/lib/cmplrs/cc2.11 -lmld' \
+ '-L/usr/lib/cmplrs/cc3.11 -lmld'
+do
+ LIBS="$libs"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char ldopen ();
+int
+main ()
+{
+return ldopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ gcc_cv_collect2_libs="$libs"; break
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+done
+LIBS="$save_LIBS"
+test -z "$gcc_cv_collect2_libs" && gcc_cv_collect2_libs='none required'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_collect2_libs" >&5
+$as_echo "$gcc_cv_collect2_libs" >&6; }
+case $gcc_cv_collect2_libs in
+ "none required") ;;
+ *) COLLECT2_LIBS=$gcc_cv_collect2_libs ;;
+esac
+
+
+# When building Ada code on Alpha, we need exc_resume which is usually in
+# -lexc. So test for it.
+save_LIBS="$LIBS"
+LIBS=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing exc_resume" >&5
+$as_echo_n "checking for library containing exc_resume... " >&6; }
+if ${ac_cv_search_exc_resume+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char exc_resume ();
+int
+main ()
+{
+return exc_resume ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' exc; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_cxx_try_link "$LINENO"; then :
+ ac_cv_search_exc_resume=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_exc_resume+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_exc_resume+:} false; then :
+
+else
+ ac_cv_search_exc_resume=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_exc_resume" >&5
+$as_echo "$ac_cv_search_exc_resume" >&6; }
+ac_res=$ac_cv_search_exc_resume
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+GNAT_LIBEXC="$LIBS"
+LIBS="$save_LIBS"
+
+
+# To support -mcpu=native on Solaris/SPARC, we need libkstat.
+save_LIBS="$LIBS"
+LIBS=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing kstat_open" >&5
+$as_echo_n "checking for library containing kstat_open... " >&6; }
+if ${ac_cv_search_kstat_open+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char kstat_open ();
+int
+main ()
+{
+return kstat_open ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' kstat; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_cxx_try_link "$LINENO"; then :
+ ac_cv_search_kstat_open=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_kstat_open+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_kstat_open+:} false; then :
+
+else
+ ac_cv_search_kstat_open=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_kstat_open" >&5
+$as_echo "$ac_cv_search_kstat_open" >&6; }
+ac_res=$ac_cv_search_kstat_open
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+EXTRA_GCC_LIBS="$LIBS"
+LIBS="$save_LIBS"
+
+
+# Solaris needs libsocket and libnsl for socket functions before 11.4.
+# C++ needs those for libcody.
+save_LIBS="$LIBS"
+LIBS=
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing gethostbyname" >&5
+$as_echo_n "checking for library containing gethostbyname... " >&6; }
+if ${ac_cv_search_gethostbyname+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char gethostbyname ();
+int
+main ()
+{
+return gethostbyname ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' nsl; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_cxx_try_link "$LINENO"; then :
+ ac_cv_search_gethostbyname=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_gethostbyname+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_gethostbyname+:} false; then :
+
+else
+ ac_cv_search_gethostbyname=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_gethostbyname" >&5
+$as_echo "$ac_cv_search_gethostbyname" >&6; }
+ac_res=$ac_cv_search_gethostbyname
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing socket" >&5
+$as_echo_n "checking for library containing socket... " >&6; }
+if ${ac_cv_search_socket+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char socket ();
+int
+main ()
+{
+return socket ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' socket; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_cxx_try_link "$LINENO"; then :
+ ac_cv_search_socket=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_socket+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_socket+:} false; then :
+
+else
+ ac_cv_search_socket=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_socket" >&5
+$as_echo "$ac_cv_search_socket" >&6; }
+ac_res=$ac_cv_search_socket
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for socket in -lsocket" >&5
+$as_echo_n "checking for socket in -lsocket... " >&6; }
+if ${ac_cv_lib_socket_socket+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsocket -lnsl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char socket ();
+int
+main ()
+{
+return socket ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ ac_cv_lib_socket_socket=yes
+else
+ ac_cv_lib_socket_socket=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_socket" >&5
+$as_echo "$ac_cv_lib_socket_socket" >&6; }
+if test "x$ac_cv_lib_socket_socket" = xyes; then :
+ LIBS="-lsocket -lnsl $LIBS"
+fi
+
+fi
+
+
+NETLIBS="$LIBS"
+LIBS="$save_LIBS"
+
+
+# Some systems put ldexp and frexp in libm instead of libc; assume
+# they're both in the same place. jcf-dump needs them.
+save_LIBS="$LIBS"
+LIBS=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing ldexp" >&5
+$as_echo_n "checking for library containing ldexp... " >&6; }
+if ${ac_cv_search_ldexp+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char ldexp ();
+int
+main ()
+{
+return ldexp ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' m; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_cxx_try_link "$LINENO"; then :
+ ac_cv_search_ldexp=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_ldexp+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_ldexp+:} false; then :
+
+else
+ ac_cv_search_ldexp=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_ldexp" >&5
+$as_echo "$ac_cv_search_ldexp" >&6; }
+ac_res=$ac_cv_search_ldexp
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+LDEXP_LIB="$LIBS"
+LIBS="$save_LIBS"
+
+
+# Some systems need dlopen
+save_LIBS="$LIBS"
+LIBS=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlopen" >&5
+$as_echo_n "checking for library containing dlopen... " >&6; }
+if ${ac_cv_search_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' dl; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_cxx_try_link "$LINENO"; then :
+ ac_cv_search_dlopen=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_dlopen+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_dlopen+:} false; then :
+
+else
+ ac_cv_search_dlopen=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dlopen" >&5
+$as_echo "$ac_cv_search_dlopen" >&6; }
+ac_res=$ac_cv_search_dlopen
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+DL_LIB="$LIBS"
+LIBS="$save_LIBS"
+
+
+# Use <inttypes.h> only if it exists,
+# doesn't clash with <sys/types.h>, declares intmax_t and defines
+# PRId64
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inttypes.h" >&5
+$as_echo_n "checking for inttypes.h... " >&6; }
+if ${gcc_cv_header_inttypes_h+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#define __STDC_FORMAT_MACROS
+#include <sys/types.h>
+#include <inttypes.h>
+int
+main ()
+{
+intmax_t i = -1;
+#ifndef PRId64
+choke me
+#endif
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ gcc_cv_header_inttypes_h=yes
+else
+ gcc_cv_header_inttypes_h=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_header_inttypes_h" >&5
+$as_echo "$gcc_cv_header_inttypes_h" >&6; }
+if test $gcc_cv_header_inttypes_h = yes; then
+
+$as_echo "#define HAVE_INTTYPES_H 1" >>confdefs.h
+
+fi
+
+# Look for the ZSTD package.
+ZSTD_INCLUDE=
+ZSTD_LIB=
+
+
+ZSTD_CPPFLAGS=
+ZSTD_LDFLAGS=
+
+
+
+# Check whether --with-zstd was given.
+if test "${with_zstd+set}" = set; then :
+ withval=$with_zstd;
+fi
+
+
+# Check whether --with-zstd-include was given.
+if test "${with_zstd_include+set}" = set; then :
+ withval=$with_zstd_include;
+fi
+
+
+# Check whether --with-zstd-lib was given.
+if test "${with_zstd_lib+set}" = set; then :
+ withval=$with_zstd_lib;
+fi
+
+case "x$with_zstd" in
+ x) ;;
+ xno)
+ ZSTD_INCLUDE=
+ ZSTD_LIB=
+ ;;
+ *) ZSTD_INCLUDE=$with_zstd/include
+ ZSTD_LIB=$with_zstd/lib
+ ;;
+esac
+
+if test "x$with_zstd" != xno; then
+if test "x$with_zstd_include" != x; then
+ ZSTD_INCLUDE=$with_zstd_include
+fi
+if test "x$with_zstd_lib" != x; then
+ ZSTD_LIB=$with_zstd_lib
+fi
+if test "x$ZSTD_INCLUDE" != x \
+ && test "x$ZSTD_INCLUDE" != xno; then
+ ZSTD_CPPFLAGS=-I$ZSTD_INCLUDE
+fi
+if test "x$ZSTD_LIB" != x \
+ && test "x$ZSTD_LIB" != xno; then
+ ZSTD_LDFLAGS=-L$ZSTD_LIB
+fi
+
+CXXFLAGS="$CXXFLAGS $ZSTD_CPPFLAGS"
+LDFLAGS="$LDFLAGS $ZSTD_LDFLAGS"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for zstd.h" >&5
+$as_echo_n "checking for zstd.h... " >&6; }
+if ${gcc_cv_header_zstd_h+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # We require version 1.3.0 or later. This is the first version that has
+# ZSTD_getFrameContentSize.
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <zstd.h>
+#if ZSTD_VERSION_NUMBER < 10300
+#error "need zstd 1.3.0 or better"
+#endif
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ gcc_cv_header_zstd_h=yes
+else
+ gcc_cv_header_zstd_h=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_header_zstd_h" >&5
+$as_echo "$gcc_cv_header_zstd_h" >&6; }
+if test $gcc_cv_header_zstd_h = yes; then
+
+$as_echo "#define HAVE_ZSTD_H 1" >>confdefs.h
+
+elif test "x$with_zstd" != x; then
+ as_fn_error $? "Unable to find zstd.h. See config.log for details." "$LINENO" 5
+fi
+
+# LTO can use zstd compression algorithm
+save_LIBS="$LIBS"
+LIBS=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing ZSTD_compress" >&5
+$as_echo_n "checking for library containing ZSTD_compress... " >&6; }
+if ${ac_cv_search_ZSTD_compress+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char ZSTD_compress ();
+int
+main ()
+{
+return ZSTD_compress ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' zstd; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_cxx_try_link "$LINENO"; then :
+ ac_cv_search_ZSTD_compress=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_ZSTD_compress+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_ZSTD_compress+:} false; then :
+
+else
+ ac_cv_search_ZSTD_compress=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_ZSTD_compress" >&5
+$as_echo "$ac_cv_search_ZSTD_compress" >&6; }
+ac_res=$ac_cv_search_ZSTD_compress
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+ZSTD_LIB="$LIBS"
+LIBS="$save_LIBS"
+
+fi
+
+
+
+for ac_func in times clock kill getrlimit setrlimit atoq \
+ popen sysconf strsignal getrusage nl_langinfo \
+ gettimeofday mbstowcs wcswidth mmap posix_fallocate setlocale \
+ clearerr_unlocked feof_unlocked ferror_unlocked fflush_unlocked fgetc_unlocked fgets_unlocked fileno_unlocked fprintf_unlocked fputc_unlocked fputs_unlocked fread_unlocked fwrite_unlocked getchar_unlocked getc_unlocked putchar_unlocked putc_unlocked madvise mallinfo mallinfo2 fstatat
+do :
+ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_cxx_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+if test x$ac_cv_func_mbstowcs = xyes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mbstowcs works" >&5
+$as_echo_n "checking whether mbstowcs works... " >&6; }
+if ${gcc_cv_func_mbstowcs_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ gcc_cv_func_mbstowcs_works=yes
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+int main()
+{
+ mbstowcs(0, "", 0);
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_run "$LINENO"; then :
+ gcc_cv_func_mbstowcs_works=yes
+else
+ gcc_cv_func_mbstowcs_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_func_mbstowcs_works" >&5
+$as_echo "$gcc_cv_func_mbstowcs_works" >&6; }
+ if test x$gcc_cv_func_mbstowcs_works = xyes; then
+
+$as_echo "#define HAVE_WORKING_MBSTOWCS 1" >>confdefs.h
+
+ fi
+fi
+
+ac_fn_cxx_check_type "$LINENO" "ssize_t" "ac_cv_type_ssize_t" "$ac_includes_default"
+if test "x$ac_cv_type_ssize_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define ssize_t int
+_ACEOF
+
+fi
+
+ac_fn_cxx_check_type "$LINENO" "caddr_t" "ac_cv_type_caddr_t" "$ac_includes_default"
+if test "x$ac_cv_type_caddr_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define caddr_t char *
+_ACEOF
+
+fi
+
+ac_fn_cxx_check_type "$LINENO" "sighander_t" "ac_cv_type_sighander_t" "signal.h
+"
+if test "x$ac_cv_type_sighander_t" = xyes; then :
+
+$as_echo "#define HAVE_SIGHANDLER_T 1" >>confdefs.h
+
+fi
+
+
+
+ac_fn_cxx_check_header_preproc "$LINENO" "sys/mman.h" "ac_cv_header_sys_mman_h"
+if test "x$ac_cv_header_sys_mman_h" = xyes; then :
+ gcc_header_sys_mman_h=yes
+else
+ gcc_header_sys_mman_h=no
+fi
+
+ac_fn_cxx_check_func "$LINENO" "mmap" "ac_cv_func_mmap"
+if test "x$ac_cv_func_mmap" = xyes; then :
+ gcc_func_mmap=yes
+else
+ gcc_func_mmap=no
+fi
+
+if test "$gcc_header_sys_mman_h" != yes \
+ || test "$gcc_func_mmap" != yes; then
+ gcc_cv_func_mmap_file=no
+ gcc_cv_func_mmap_dev_zero=no
+ gcc_cv_func_mmap_anon=no
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether read-only mmap of a plain file works" >&5
+$as_echo_n "checking whether read-only mmap of a plain file works... " >&6; }
+if ${gcc_cv_func_mmap_file+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Add a system to this blacklist if
+ # mmap(0, stat_size, PROT_READ, MAP_PRIVATE, fd, 0) doesn't return a
+ # memory area containing the same data that you'd get if you applied
+ # read() to the same fd. The only system known to have a problem here
+ # is VMS, where text files have record structure.
+ case "$host_os" in
+ *vms* | ultrix*)
+ gcc_cv_func_mmap_file=no ;;
+ *)
+ gcc_cv_func_mmap_file=yes;;
+ esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_func_mmap_file" >&5
+$as_echo "$gcc_cv_func_mmap_file" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mmap from /dev/zero works" >&5
+$as_echo_n "checking whether mmap from /dev/zero works... " >&6; }
+if ${gcc_cv_func_mmap_dev_zero+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Add a system to this blacklist if it has mmap() but /dev/zero
+ # does not exist, or if mmapping /dev/zero does not give anonymous
+ # zeroed pages with both the following properties:
+ # 1. If you map N consecutive pages in with one call, and then
+ # unmap any subset of those pages, the pages that were not
+ # explicitly unmapped remain accessible.
+ # 2. If you map two adjacent blocks of memory and then unmap them
+ # both at once, they must both go away.
+ # Systems known to be in this category are Windows (all variants),
+ # VMS, and Darwin.
+ case "$host_os" in
+ *vms* | cygwin* | pe | mingw* | darwin* | ultrix* | hpux10* | hpux11.00)
+ gcc_cv_func_mmap_dev_zero=no ;;
+ *)
+ gcc_cv_func_mmap_dev_zero=yes;;
+ esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_func_mmap_dev_zero" >&5
+$as_echo "$gcc_cv_func_mmap_dev_zero" >&6; }
+
+ # Unlike /dev/zero, the MAP_ANON(YMOUS) defines can be probed for.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for MAP_ANON(YMOUS)" >&5
+$as_echo_n "checking for MAP_ANON(YMOUS)... " >&6; }
+if ${gcc_cv_decl_map_anon+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/mman.h>
+#include <unistd.h>
+
+#ifndef MAP_ANONYMOUS
+#define MAP_ANONYMOUS MAP_ANON
+#endif
+
+int
+main ()
+{
+int n = MAP_ANONYMOUS;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ gcc_cv_decl_map_anon=yes
+else
+ gcc_cv_decl_map_anon=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_decl_map_anon" >&5
+$as_echo "$gcc_cv_decl_map_anon" >&6; }
+
+ if test $gcc_cv_decl_map_anon = no; then
+ gcc_cv_func_mmap_anon=no
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mmap with MAP_ANON(YMOUS) works" >&5
+$as_echo_n "checking whether mmap with MAP_ANON(YMOUS) works... " >&6; }
+if ${gcc_cv_func_mmap_anon+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Add a system to this blacklist if it has mmap() and MAP_ANON or
+ # MAP_ANONYMOUS, but using mmap(..., MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
+ # doesn't give anonymous zeroed pages with the same properties listed
+ # above for use of /dev/zero.
+ # Systems known to be in this category are Windows, VMS, and SCO Unix.
+ case "$host_os" in
+ *vms* | cygwin* | pe | mingw* | sco* | udk* )
+ gcc_cv_func_mmap_anon=no ;;
+ *)
+ gcc_cv_func_mmap_anon=yes;;
+ esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_func_mmap_anon" >&5
+$as_echo "$gcc_cv_func_mmap_anon" >&6; }
+ fi
+fi
+
+if test $gcc_cv_func_mmap_file = yes; then
+
+$as_echo "#define HAVE_MMAP_FILE 1" >>confdefs.h
+
+fi
+if test $gcc_cv_func_mmap_dev_zero = yes; then
+
+$as_echo "#define HAVE_MMAP_DEV_ZERO 1" >>confdefs.h
+
+fi
+if test $gcc_cv_func_mmap_anon = yes; then
+
+$as_echo "#define HAVE_MMAP_ANON 1" >>confdefs.h
+
+fi
+
+
+case "${host}" in
+*-*-*vms*)
+ # Under VMS, vfork works very differently than on Unix. The standard test
+ # won't work, and it isn't easily adaptable. It makes more sense to
+ # just force it.
+ ac_cv_func_vfork_works=yes
+ ;;
+esac
+ac_fn_cxx_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default"
+if test "x$ac_cv_type_pid_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define pid_t int
+_ACEOF
+
+fi
+
+for ac_header in vfork.h
+do :
+ ac_fn_cxx_check_header_preproc "$LINENO" "vfork.h" "ac_cv_header_vfork_h"
+if test "x$ac_cv_header_vfork_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_VFORK_H 1
+_ACEOF
+
+fi
+done
+
+for ac_func in fork vfork
+do :
+ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_cxx_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+if test "x$ac_cv_func_fork" = xyes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working fork" >&5
+$as_echo_n "checking for working fork... " >&6; }
+if ${ac_cv_func_fork_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ ac_cv_func_fork_works=cross
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+
+ /* By Ruediger Kuhlmann. */
+ return fork () < 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_run "$LINENO"; then :
+ ac_cv_func_fork_works=yes
+else
+ ac_cv_func_fork_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_fork_works" >&5
+$as_echo "$ac_cv_func_fork_works" >&6; }
+
+else
+ ac_cv_func_fork_works=$ac_cv_func_fork
+fi
+if test "x$ac_cv_func_fork_works" = xcross; then
+ case $host in
+ *-*-amigaos* | *-*-msdosdjgpp*)
+ # Override, as these systems have only a dummy fork() stub
+ ac_cv_func_fork_works=no
+ ;;
+ *)
+ ac_cv_func_fork_works=yes
+ ;;
+ esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5
+$as_echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;}
+fi
+ac_cv_func_vfork_works=$ac_cv_func_vfork
+if test "x$ac_cv_func_vfork" = xyes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working vfork" >&5
+$as_echo_n "checking for working vfork... " >&6; }
+if ${ac_cv_func_vfork_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ ac_cv_func_vfork_works=cross
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Thanks to Paul Eggert for this test. */
+$ac_includes_default
+#include <sys/wait.h>
+#ifdef HAVE_VFORK_H
+# include <vfork.h>
+#endif
+/* On some sparc systems, changes by the child to local and incoming
+ argument registers are propagated back to the parent. The compiler
+ is told about this with #include <vfork.h>, but some compilers
+ (e.g. gcc -O) don't grok <vfork.h>. Test for this by using a
+ static variable whose address is put into a register that is
+ clobbered by the vfork. */
+static void
+#ifdef __cplusplus
+sparc_address_test (int arg)
+# else
+sparc_address_test (arg) int arg;
+#endif
+{
+ static pid_t child;
+ if (!child) {
+ child = vfork ();
+ if (child < 0) {
+ perror ("vfork");
+ _exit(2);
+ }
+ if (!child) {
+ arg = getpid();
+ write(-1, "", 0);
+ _exit (arg);
+ }
+ }
+}
+
+int
+main ()
+{
+ pid_t parent = getpid ();
+ pid_t child;
+
+ sparc_address_test (0);
+
+ child = vfork ();
+
+ if (child == 0) {
+ /* Here is another test for sparc vfork register problems. This
+ test uses lots of local variables, at least as many local
+ variables as main has allocated so far including compiler
+ temporaries. 4 locals are enough for gcc 1.40.3 on a Solaris
+ 4.1.3 sparc, but we use 8 to be safe. A buggy compiler should
+ reuse the register of parent for one of the local variables,
+ since it will think that parent can't possibly be used any more
+ in this routine. Assigning to the local variable will thus
+ munge parent in the parent process. */
+ pid_t
+ p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(),
+ p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid();
+ /* Convince the compiler that p..p7 are live; otherwise, it might
+ use the same hardware register for all 8 local variables. */
+ if (p != p1 || p != p2 || p != p3 || p != p4
+ || p != p5 || p != p6 || p != p7)
+ _exit(1);
+
+ /* On some systems (e.g. IRIX 3.3), vfork doesn't separate parent
+ from child file descriptors. If the child closes a descriptor
+ before it execs or exits, this munges the parent's descriptor
+ as well. Test for this by closing stdout in the child. */
+ _exit(close(fileno(stdout)) != 0);
+ } else {
+ int status;
+ struct stat st;
+
+ while (wait(&status) != child)
+ ;
+ return (
+ /* Was there some problem with vforking? */
+ child < 0
+
+ /* Did the child fail? (This shouldn't happen.) */
+ || status
+
+ /* Did the vfork/compiler bug occur? */
+ || parent != getpid()
+
+ /* Did the file descriptor bug occur? */
+ || fstat(fileno(stdout), &st) != 0
+ );
+ }
+}
+_ACEOF
+if ac_fn_cxx_try_run "$LINENO"; then :
+ ac_cv_func_vfork_works=yes
+else
+ ac_cv_func_vfork_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_vfork_works" >&5
+$as_echo "$ac_cv_func_vfork_works" >&6; }
+
+fi;
+if test "x$ac_cv_func_fork_works" = xcross; then
+ ac_cv_func_vfork_works=$ac_cv_func_vfork
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5
+$as_echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;}
+fi
+
+if test "x$ac_cv_func_vfork_works" = xyes; then
+
+$as_echo "#define HAVE_WORKING_VFORK 1" >>confdefs.h
+
+else
+
+$as_echo "#define vfork fork" >>confdefs.h
+
+fi
+if test "x$ac_cv_func_fork_works" = xyes; then
+
+$as_echo "#define HAVE_WORKING_FORK 1" >>confdefs.h
+
+fi
+
+
+
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
+$as_echo_n "checking for ld used by GCC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${acl_cv_path_LD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${acl_cv_prog_gnu_ld+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ acl_cv_prog_gnu_ld=yes
+else
+ acl_cv_prog_gnu_ld=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
+$as_echo "$acl_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$acl_cv_prog_gnu_ld
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
+$as_echo_n "checking for shared library run path origin... " >&6; }
+if ${acl_cv_rpath+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
+$as_echo "$acl_cv_rpath" >&6; }
+ wl="$acl_cv_wl"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ # Check whether --enable-rpath was given.
+if test "${enable_rpath+set}" = set; then :
+ enableval=$enable_rpath; :
+else
+ enable_rpath=yes
+fi
+
+
+
+
+
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libiconv-prefix was given.
+if test "${with_libiconv_prefix+set}" = set; then :
+ withval=$with_libiconv_prefix;
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+
+fi
+
+
+# Check whether --with-libiconv-type was given.
+if test "${with_libiconv_type+set}" = set; then :
+ withval=$with_libiconv_type; with_libiconv_type=$withval
+else
+ with_libiconv_type=auto
+fi
+
+ lib_type=`eval echo \$with_libiconv_type`
+
+ LIBICONV=
+ LTLIBICONV=
+ INCICONV=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='iconv '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext" && test x$lib_type != xstatic; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ elif test x$lib_type != xshared; then
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext" && test x$lib_type != xstatic; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ elif test x$lib_type != xshared; then
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$hardcode_direct" = yes; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ if test "x$lib_type" = "xauto" || test "x$lib_type" = "xshared"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l:lib$name.$libext"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l:lib$name.$libext"
+ fi
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
+ done
+ fi
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
+$as_echo_n "checking for iconv... " >&6; }
+if ${am_cv_func_iconv+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ am_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $INCICONV"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <iconv.h>
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ CPPFLAGS="$am_save_CPPFLAGS"
+
+ if test "$am_cv_func_iconv" != yes && test -d ../libiconv; then
+ for _libs in .libs _libs; do
+ am_save_CPPFLAGS="$CPPFLAGS"
+ am_save_LIBS="$LIBS"
+ CPPFLAGS="$CPPFLAGS -I../libiconv/include"
+ LIBS="$LIBS ../libiconv/lib/$_libs/libiconv.a"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <iconv.h>
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ INCICONV="-I../libiconv/include"
+ LIBICONV='${top_builddir}'/../libiconv/lib/$_libs/libiconv.a
+ LTLIBICONV='${top_builddir}'/../libiconv/lib/libiconv.la
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ CPPFLAGS="$am_save_CPPFLAGS"
+ LIBS="$am_save_LIBS"
+ if test "$am_cv_func_iconv" = "yes"; then
+ break
+ fi
+ done
+ fi
+
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_CPPFLAGS="$CPPFLAGS"
+ am_save_LIBS="$LIBS"
+ CPPFLAGS="$CPPFLAGS $INCICONV"
+ LIBS="$LIBS $LIBICONV"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <iconv.h>
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ CPPFLAGS="$am_save_CPPFLAGS"
+ LIBS="$am_save_LIBS"
+ fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
+$as_echo "$am_cv_func_iconv" >&6; }
+ if test "$am_cv_func_iconv" = yes; then
+
+$as_echo "#define HAVE_ICONV 1" >>confdefs.h
+
+ fi
+ if test "$am_cv_lib_iconv" = yes; then
+
+ for element in $INCICONV; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5
+$as_echo_n "checking how to link with libiconv... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5
+$as_echo "$LIBICONV" >&6; }
+ else
+ LIBICONV=
+ LTLIBICONV=
+ fi
+
+
+
+ if test "$am_cv_func_iconv" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv declaration" >&5
+$as_echo_n "checking for iconv declaration... " >&6; }
+ if ${am_cv_proto_iconv+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ am_cv_proto_iconv_arg1=""
+else
+ am_cv_proto_iconv_arg1="const"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"
+fi
+
+ am_cv_proto_iconv=`echo "$am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ac_t:-
+ }$am_cv_proto_iconv" >&5
+$as_echo "${ac_t:-
+ }$am_cv_proto_iconv" >&6; }
+
+cat >>confdefs.h <<_ACEOF
+#define ICONV_CONST $am_cv_proto_iconv_arg1
+_ACEOF
+
+ fi
+
+
+# Until we have in-tree GNU iconv:
+LIBICONV_DEP=
+if test -f "$LTLIBICONV"; then
+ LIBICONV_DEP=$LTLIBICONV
+fi
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LC_MESSAGES" >&5
+$as_echo_n "checking for LC_MESSAGES... " >&6; }
+if ${am_cv_val_LC_MESSAGES+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <locale.h>
+int
+main ()
+{
+return LC_MESSAGES
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ am_cv_val_LC_MESSAGES=yes
+else
+ am_cv_val_LC_MESSAGES=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_val_LC_MESSAGES" >&5
+$as_echo "$am_cv_val_LC_MESSAGES" >&6; }
+ if test $am_cv_val_LC_MESSAGES = yes; then
+
+$as_echo "#define HAVE_LC_MESSAGES 1" >>confdefs.h
+
+ fi
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for nl_langinfo and CODESET" >&5
+$as_echo_n "checking for nl_langinfo and CODESET... " >&6; }
+if ${am_cv_langinfo_codeset+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <langinfo.h>
+int
+main ()
+{
+char* cs = nl_langinfo(CODESET);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ am_cv_langinfo_codeset=yes
+else
+ am_cv_langinfo_codeset=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_langinfo_codeset" >&5
+$as_echo "$am_cv_langinfo_codeset" >&6; }
+ if test $am_cv_langinfo_codeset = yes; then
+
+$as_echo "#define HAVE_LANGINFO_CODESET 1" >>confdefs.h
+
+ fi
+
+
+# We will need to find libiberty.h and ansidecl.h
+saved_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS -I${srcdir} -I${srcdir}/../include $GMPINC"
+saved_CXXFLAGS="$CXXFLAGS"
+CXXFLAGS="$CXXFLAGS -I${srcdir} -I${srcdir}/../include $GMPINC"
+
+# gcc_AC_CHECK_DECLS doesn't support overloaded functions, so use the
+# normal autoconf function for these. But force definition of
+# HAVE_DECL_BASENAME like gcc_AC_CHECK_DECLS does, to suppress the bizarre
+# basename handling in libiberty.h.
+as_ac_Symbol=`$as_echo "ac_cv_have_decl_basename(const char*)" | $as_tr_sh`
+ac_fn_cxx_check_decl "$LINENO" "basename(const char*)" "$as_ac_Symbol" "
+#undef HAVE_DECL_BASENAME
+#define HAVE_DECL_BASENAME 1
+#include \"ansidecl.h\"
+#include \"system.h\"
+"
+if eval test \"x\$"$as_ac_Symbol"\" = x"yes"; then :
+ ac_have_decl=1
+else
+ ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_BASENAME $ac_have_decl
+_ACEOF
+as_ac_Symbol=`$as_echo "ac_cv_have_decl_strstr(const char*,const char*)" | $as_tr_sh`
+ac_fn_cxx_check_decl "$LINENO" "strstr(const char*,const char*)" "$as_ac_Symbol" "
+#undef HAVE_DECL_BASENAME
+#define HAVE_DECL_BASENAME 1
+#include \"ansidecl.h\"
+#include \"system.h\"
+"
+if eval test \"x\$"$as_ac_Symbol"\" = x"yes"; then :
+ ac_have_decl=1
+else
+ ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_STRSTR $ac_have_decl
+_ACEOF
+
+
+for ac_func in getenv atol atoll asprintf sbrk abort atof getcwd getwd \
+ madvise stpcpy strnlen strsignal strverscmp \
+ strtol strtoul strtoll strtoull setenv unsetenv \
+ errno snprintf vsnprintf vasprintf malloc realloc calloc \
+ free getopt clock getpagesize ffs clearerr_unlocked feof_unlocked ferror_unlocked fflush_unlocked fgetc_unlocked fgets_unlocked fileno_unlocked fprintf_unlocked fputc_unlocked fputs_unlocked fread_unlocked fwrite_unlocked getchar_unlocked getc_unlocked putchar_unlocked putc_unlocked
+do
+ ac_tr_decl=`$as_echo "HAVE_DECL_$ac_func" | $as_tr_cpp`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $ac_func is declared" >&5
+$as_echo_n "checking whether $ac_func is declared... " >&6; }
+if eval \${gcc_cv_have_decl_$ac_func+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#undef $ac_tr_decl
+#define $ac_tr_decl 1
+
+#include "ansidecl.h"
+#include "system.h"
+
+int
+main ()
+{
+#ifndef $ac_func
+char *(*pfn) = (char *(*)) $ac_func ;
+#endif
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ eval "gcc_cv_have_decl_$ac_func=yes"
+else
+ eval "gcc_cv_have_decl_$ac_func=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+if eval "test \"`echo '$gcc_cv_have_decl_'$ac_func`\" = yes"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; } ; cat >>confdefs.h <<_ACEOF
+#define $ac_tr_decl 1
+_ACEOF
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; } ; cat >>confdefs.h <<_ACEOF
+#define $ac_tr_decl 0
+_ACEOF
+
+fi
+
+done
+
+
+for ac_func in getrlimit setrlimit getrusage
+do
+ ac_tr_decl=`$as_echo "HAVE_DECL_$ac_func" | $as_tr_cpp`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $ac_func is declared" >&5
+$as_echo_n "checking whether $ac_func is declared... " >&6; }
+if eval \${gcc_cv_have_decl_$ac_func+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#undef $ac_tr_decl
+#define $ac_tr_decl 1
+
+#include "ansidecl.h"
+#include "system.h"
+#ifdef HAVE_SYS_RESOURCE_H
+#include <sys/resource.h>
+#endif
+
+
+int
+main ()
+{
+#ifndef $ac_func
+char *(*pfn) = (char *(*)) $ac_func ;
+#endif
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ eval "gcc_cv_have_decl_$ac_func=yes"
+else
+ eval "gcc_cv_have_decl_$ac_func=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+if eval "test \"`echo '$gcc_cv_have_decl_'$ac_func`\" = yes"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; } ; cat >>confdefs.h <<_ACEOF
+#define $ac_tr_decl 1
+_ACEOF
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; } ; cat >>confdefs.h <<_ACEOF
+#define $ac_tr_decl 0
+_ACEOF
+
+fi
+
+done
+
+
+for ac_func in mallinfo mallinfo2
+do
+ ac_tr_decl=`$as_echo "HAVE_DECL_$ac_func" | $as_tr_cpp`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $ac_func is declared" >&5
+$as_echo_n "checking whether $ac_func is declared... " >&6; }
+if eval \${gcc_cv_have_decl_$ac_func+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#undef $ac_tr_decl
+#define $ac_tr_decl 1
+
+#include "ansidecl.h"
+#include "system.h"
+#ifdef HAVE_MALLOC_H
+#include <malloc.h>
+#endif
+
+
+int
+main ()
+{
+#ifndef $ac_func
+char *(*pfn) = (char *(*)) $ac_func ;
+#endif
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ eval "gcc_cv_have_decl_$ac_func=yes"
+else
+ eval "gcc_cv_have_decl_$ac_func=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+if eval "test \"`echo '$gcc_cv_have_decl_'$ac_func`\" = yes"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; } ; cat >>confdefs.h <<_ACEOF
+#define $ac_tr_decl 1
+_ACEOF
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; } ; cat >>confdefs.h <<_ACEOF
+#define $ac_tr_decl 0
+_ACEOF
+
+fi
+
+done
+
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include "ansidecl.h"
+#include "system.h"
+#ifdef HAVE_SYS_RESOURCE_H
+#include <sys/resource.h>
+#endif
+
+int
+main ()
+{
+rlim_t l = 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+else
+
+$as_echo "#define rlim_t long" >>confdefs.h
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+# On AIX 5.2, <ldfcn.h> conflicts with <fcntl.h>, as both define incompatible
+# FREAD and FWRITE macros. Fortunately, for GCC's single usage of ldgetname
+# in collect2.cc, <fcntl.h> isn't visible, but the configure test below needs
+# to undef these macros to get the correct value for HAVE_DECL_LDGETNAME.
+for ac_func in ldgetname
+do
+ ac_tr_decl=`$as_echo "HAVE_DECL_$ac_func" | $as_tr_cpp`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $ac_func is declared" >&5
+$as_echo_n "checking whether $ac_func is declared... " >&6; }
+if eval \${gcc_cv_have_decl_$ac_func+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#undef $ac_tr_decl
+#define $ac_tr_decl 1
+
+#include "ansidecl.h"
+#include "system.h"
+#ifdef HAVE_LDFCN_H
+#undef FREAD
+#undef FWRITE
+#include <ldfcn.h>
+#endif
+
+
+int
+main ()
+{
+#ifndef $ac_func
+char *(*pfn) = (char *(*)) $ac_func ;
+#endif
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ eval "gcc_cv_have_decl_$ac_func=yes"
+else
+ eval "gcc_cv_have_decl_$ac_func=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+if eval "test \"`echo '$gcc_cv_have_decl_'$ac_func`\" = yes"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; } ; cat >>confdefs.h <<_ACEOF
+#define $ac_tr_decl 1
+_ACEOF
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; } ; cat >>confdefs.h <<_ACEOF
+#define $ac_tr_decl 0
+_ACEOF
+
+fi
+
+done
+
+
+for ac_func in times
+do
+ ac_tr_decl=`$as_echo "HAVE_DECL_$ac_func" | $as_tr_cpp`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $ac_func is declared" >&5
+$as_echo_n "checking whether $ac_func is declared... " >&6; }
+if eval \${gcc_cv_have_decl_$ac_func+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#undef $ac_tr_decl
+#define $ac_tr_decl 1
+
+#include "ansidecl.h"
+#include "system.h"
+#ifdef HAVE_SYS_TIMES_H
+#include <sys/times.h>
+#endif
+
+
+int
+main ()
+{
+#ifndef $ac_func
+char *(*pfn) = (char *(*)) $ac_func ;
+#endif
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ eval "gcc_cv_have_decl_$ac_func=yes"
+else
+ eval "gcc_cv_have_decl_$ac_func=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+if eval "test \"`echo '$gcc_cv_have_decl_'$ac_func`\" = yes"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; } ; cat >>confdefs.h <<_ACEOF
+#define $ac_tr_decl 1
+_ACEOF
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; } ; cat >>confdefs.h <<_ACEOF
+#define $ac_tr_decl 0
+_ACEOF
+
+fi
+
+done
+
+
+for ac_func in sigaltstack
+do
+ ac_tr_decl=`$as_echo "HAVE_DECL_$ac_func" | $as_tr_cpp`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $ac_func is declared" >&5
+$as_echo_n "checking whether $ac_func is declared... " >&6; }
+if eval \${gcc_cv_have_decl_$ac_func+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#undef $ac_tr_decl
+#define $ac_tr_decl 1
+
+#include "ansidecl.h"
+#include "system.h"
+#include <signal.h>
+
+
+int
+main ()
+{
+#ifndef $ac_func
+char *(*pfn) = (char *(*)) $ac_func ;
+#endif
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ eval "gcc_cv_have_decl_$ac_func=yes"
+else
+ eval "gcc_cv_have_decl_$ac_func=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+if eval "test \"`echo '$gcc_cv_have_decl_'$ac_func`\" = yes"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; } ; cat >>confdefs.h <<_ACEOF
+#define $ac_tr_decl 1
+_ACEOF
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; } ; cat >>confdefs.h <<_ACEOF
+#define $ac_tr_decl 0
+_ACEOF
+
+fi
+
+done
+
+
+# More time-related stuff.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct tms" >&5
+$as_echo_n "checking for struct tms... " >&6; }
+if ${ac_cv_struct_tms+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include "ansidecl.h"
+#include "system.h"
+#ifdef HAVE_SYS_TIMES_H
+#include <sys/times.h>
+#endif
+
+int
+main ()
+{
+struct tms tms;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_struct_tms=yes
+else
+ ac_cv_struct_tms=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tms" >&5
+$as_echo "$ac_cv_struct_tms" >&6; }
+if test $ac_cv_struct_tms = yes; then
+
+$as_echo "#define HAVE_STRUCT_TMS 1" >>confdefs.h
+
+fi
+
+# use gcc_cv_* here because this doesn't match the behavior of AC_CHECK_TYPE.
+# revisit after autoconf 2.50.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for clock_t" >&5
+$as_echo_n "checking for clock_t... " >&6; }
+if ${gcc_cv_type_clock_t+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include "ansidecl.h"
+#include "system.h"
+
+int
+main ()
+{
+clock_t x;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ gcc_cv_type_clock_t=yes
+else
+ gcc_cv_type_clock_t=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_type_clock_t" >&5
+$as_echo "$gcc_cv_type_clock_t" >&6; }
+if test $gcc_cv_type_clock_t = yes; then
+
+$as_echo "#define HAVE_CLOCK_T 1" >>confdefs.h
+
+fi
+
+# Check if F_SETLKW is supported by fcntl.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for F_SETLKW" >&5
+$as_echo_n "checking for F_SETLKW... " >&6; }
+if ${ac_cv_f_setlkw+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <fcntl.h>
+int
+main ()
+{
+
+struct flock fl;
+fl.l_whence = 0;
+fl.l_start = 0;
+fl.l_len = 0;
+fl.l_pid = 0;
+return fcntl (1, F_SETLKW, &fl);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_f_setlkw=yes
+else
+ ac_cv_f_setlkw=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_f_setlkw" >&5
+$as_echo "$ac_cv_f_setlkw" >&6; }
+if test $ac_cv_f_setlkw = yes; then
+
+$as_echo "#define HOST_HAS_F_SETLKW 1" >>confdefs.h
+
+fi
+
+# Check if O_CLOEXEC is defined by fcntl
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for O_CLOEXEC" >&5
+$as_echo_n "checking for O_CLOEXEC... " >&6; }
+if ${ac_cv_o_cloexec+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <fcntl.h>
+int
+main ()
+{
+
+return open ("/dev/null", O_RDONLY | O_CLOEXEC);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_o_cloexec=yes
+else
+ ac_cv_o_cloexec=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_o_cloexec" >&5
+$as_echo "$ac_cv_o_cloexec" >&6; }
+if test $ac_cv_o_cloexec = yes; then
+
+$as_echo "#define HOST_HAS_O_CLOEXEC 1" >>confdefs.h
+
+fi
+
+# C++ Modules would like some networking features to provide the mapping
+# server. You can still use modules without them though.
+# The following network-related checks could probably do with some
+# Windows and other non-linux defenses and checking.
+
+# Local socket connectivity wants AF_UNIX networking
+# Check for AF_UNIX networking
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for AF_UNIX" >&5
+$as_echo_n "checking for AF_UNIX... " >&6; }
+if ${ac_cv_af_unix+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/un.h>
+#include <netinet/in.h>
+int
+main ()
+{
+
+sockaddr_un un;
+un.sun_family = AF_UNSPEC;
+int fd = socket (AF_UNIX, SOCK_STREAM, 0);
+connect (fd, (sockaddr *)&un, sizeof (un));
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_af_unix=yes
+else
+ ac_cv_af_unix=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_af_unix" >&5
+$as_echo "$ac_cv_af_unix" >&6; }
+if test $ac_cv_af_unix = yes; then
+
+$as_echo "#define HAVE_AF_UNIX 1" >>confdefs.h
+
+fi
+
+# Remote socket connectivity wants AF_INET6 networking
+# Check for AF_INET6 networking
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for AF_INET6" >&5
+$as_echo_n "checking for AF_INET6... " >&6; }
+if ${ac_cv_af_inet6+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <netdb.h>
+int
+main ()
+{
+
+sockaddr_in6 in6;
+in6.sin6_family = AF_UNSPEC;
+struct addrinfo *addrs = 0;
+struct addrinfo hints;
+hints.ai_flags = 0;
+hints.ai_family = AF_INET6;
+hints.ai_socktype = SOCK_STREAM;
+hints.ai_protocol = 0;
+hints.ai_canonname = 0;
+hints.ai_addr = 0;
+hints.ai_next = 0;
+int e = getaddrinfo ("localhost", 0, &hints, &addrs);
+const char *str = gai_strerror (e);
+freeaddrinfo (addrs);
+int fd = socket (AF_INET6, SOCK_STREAM, 0);
+connect (fd, (sockaddr *)&in6, sizeof (in6));
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_af_inet6=yes
+else
+ ac_cv_af_inet6=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_af_inet6" >&5
+$as_echo "$ac_cv_af_inet6" >&6; }
+if test $ac_cv_af_inet6 = yes; then
+
+$as_echo "#define HAVE_AF_INET6 1" >>confdefs.h
+
+fi
+
+# Check if _LK_LOCK is supported by _locking
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LK_LOCK" >&5
+$as_echo_n "checking for _LK_LOCK... " >&6; }
+if ${ac_cv_lk_lock+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <io.h>
+#include <sys/locking.h>
+int
+main ()
+{
+
+ int fd;
+ return _locking (fd, _LK_LOCK, 0);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_lk_lock=yes
+else
+ ac_cv_lk_lock=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lk_lock" >&5
+$as_echo "$ac_cv_lk_lock" >&6; }
+if test $ac_cv_lk_lock = yes; then
+
+$as_echo "#define HOST_HAS_LK_LOCK 1" >>confdefs.h
+
+fi
+
+# Restore CFLAGS, CXXFLAGS from before the gcc_AC_NEED_DECLARATIONS tests.
+CFLAGS="$saved_CFLAGS"
+CXXFLAGS="$saved_CXXFLAGS"
+
+# mkdir takes a single argument on some systems.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if mkdir takes one argument" >&5
+$as_echo_n "checking if mkdir takes one argument... " >&6; }
+if ${gcc_cv_mkdir_takes_one_arg+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <sys/types.h>
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+#ifdef HAVE_DIRECT_H
+# include <direct.h>
+#endif
+int
+main ()
+{
+mkdir ("foo", 0);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ gcc_cv_mkdir_takes_one_arg=no
+else
+ gcc_cv_mkdir_takes_one_arg=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_mkdir_takes_one_arg" >&5
+$as_echo "$gcc_cv_mkdir_takes_one_arg" >&6; }
+if test $gcc_cv_mkdir_takes_one_arg = yes ; then
+
+$as_echo "#define MKDIR_TAKES_ONE_ARG 1" >>confdefs.h
+
+fi
+
+
+# File extensions
+manext='.1'
+objext='.o'
+
+
+
+# With Setjmp/Longjmp based exception handling.
+# Check whether --enable-sjlj-exceptions was given.
+if test "${enable_sjlj_exceptions+set}" = set; then :
+ enableval=$enable_sjlj_exceptions; case $target in
+ *-*-hpux10*)
+ if test $enableval != yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: dwarf2 exceptions not supported, sjlj exceptions forced" >&5
+$as_echo "$as_me: WARNING: dwarf2 exceptions not supported, sjlj exceptions forced" >&2;}
+ enableval=yes
+ fi
+ ;;
+esac
+force_sjlj_exceptions=yes
+else
+ case $target in
+ *-*-hpux10*)
+ force_sjlj_exceptions=yes
+ enableval=yes
+ ;;
+ lm32*-*-*)
+ force_sjlj_exceptions=yes
+ enableval=yes
+ ;;
+ *)
+ force_sjlj_exceptions=no
+ ;;
+esac
+fi
+
+if test $force_sjlj_exceptions = yes; then
+ sjlj=`if test $enableval = yes; then echo 1; else echo 0; fi`
+
+cat >>confdefs.h <<_ACEOF
+#define CONFIG_SJLJ_EXCEPTIONS $sjlj
+_ACEOF
+
+fi
+
+# --------------------------------------------------------
+# Build, host, and target specific configuration fragments
+# --------------------------------------------------------
+
+# Collect build-machine-specific information.
+. ${srcdir}/config.build || exit 1
+
+# Collect host-machine-specific information.
+. ${srcdir}/config.host || exit 1
+
+target_gtfiles=
+
+# Collect target-machine-specific information.
+. ${srcdir}/config.gcc || exit 1
+
+extra_objs="${host_extra_objs} ${extra_objs}"
+extra_gcc_objs="${host_extra_gcc_objs} ${extra_gcc_objs}"
+
+# Default the target-machine variables that were not explicitly set.
+if test x"$tm_file" = x
+then tm_file=$cpu_type/$cpu_type.h; fi
+
+if test x"$extra_headers" = x
+then extra_headers=; fi
+
+if test x$md_file = x
+then md_file=$cpu_type/$cpu_type.md; fi
+
+if test x$out_file = x
+then out_file=$cpu_type/$cpu_type.cc; fi
+
+if test x"$tmake_file" = x
+then tmake_file=$cpu_type/t-$cpu_type
+fi
+
+# Support --enable-initfini-array.
+if test x$enable_initfini_array != xno; then
+ tm_file="${tm_file} initfini-array.h"
+fi
+
+if test x"$dwarf2" = xyes
+then tm_file="$tm_file tm-dwarf2.h"
+fi
+
+# Say what files are being used for the output code and MD file.
+echo "Using \`$srcdir/config/$out_file' for machine-specific logic."
+echo "Using \`$srcdir/config/$md_file' as machine description file."
+
+# If any of the xm_file variables contain nonexistent files, warn
+# about them and drop them.
+
+bx=
+for x in $build_xm_file; do
+ if test -f $srcdir/config/$x
+ then bx="$bx $x"
+ else { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $srcdir/config/$x does not exist." >&5
+$as_echo "$as_me: WARNING: $srcdir/config/$x does not exist." >&2;}
+ fi
+done
+build_xm_file="$bx"
+
+hx=
+for x in $host_xm_file; do
+ if test -f $srcdir/config/$x
+ then hx="$hx $x"
+ else { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $srcdir/config/$x does not exist." >&5
+$as_echo "$as_me: WARNING: $srcdir/config/$x does not exist." >&2;}
+ fi
+done
+host_xm_file="$hx"
+
+tx=
+for x in $xm_file; do
+ if test -f $srcdir/config/$x
+ then tx="$tx $x"
+ else { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $srcdir/config/$x does not exist." >&5
+$as_echo "$as_me: WARNING: $srcdir/config/$x does not exist." >&2;}
+ fi
+done
+xm_file="$tx"
+
+count=a
+for f in $tm_file; do
+ count=${count}x
+done
+if test $count = ax; then
+ echo "Using \`$srcdir/config/$tm_file' as target machine macro file."
+else
+ echo "Using the following target machine macro files:"
+ for f in $tm_file; do
+ echo " $srcdir/config/$f"
+ done
+fi
+
+if test x$use_long_long_for_widest_fast_int = xyes; then
+
+$as_echo "#define USE_LONG_LONG_FOR_WIDEST_FAST_INT 1" >>confdefs.h
+
+fi
+
+gnu_ld_bool=`if test x"$gnu_ld" = x"yes"; then echo 1; else echo 0; fi`
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_GNU_LD $gnu_ld_bool
+_ACEOF
+
+
+gnu_as_bool=`if test x"$gas" = x"yes"; then echo 1; else echo 0; fi`
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_GNU_AS $gnu_as_bool
+_ACEOF
+
+
+count=a
+for f in $host_xm_file; do
+ count=${count}x
+done
+if test $count = a; then
+ :
+elif test $count = ax; then
+ echo "Using \`$srcdir/config/$host_xm_file' as host machine macro file."
+else
+ echo "Using the following host machine macro files:"
+ for f in $host_xm_file; do
+ echo " $srcdir/config/$f"
+ done
+fi
+echo "Using ${out_host_hook_obj} for host machine hooks."
+
+if test "$host_xm_file" != "$build_xm_file"; then
+ count=a
+ for f in $build_xm_file; do
+ count=${count}x
+ done
+ if test $count = a; then
+ :
+ elif test $count = ax; then
+ echo "Using \`$srcdir/config/$build_xm_file' as build machine macro file."
+ else
+ echo "Using the following build machine macro files:"
+ for f in $build_xm_file; do
+ echo " $srcdir/config/$f"
+ done
+ fi
+fi
+
+if test -n "$configured_native_system_header_dir"; then
+ native_system_header_dir=$configured_native_system_header_dir
+fi
+NATIVE_SYSTEM_HEADER_DIR="$native_system_header_dir"
+
+
+case ${host} in
+ powerpc*-*-darwin*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mcontext_t fields have underscores" >&5
+$as_echo_n "checking whether mcontext_t fields have underscores... " >&6; }
+if ${gcc_cv_mcontext_underscores+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <sys/cdefs.h>
+#include <sys/signal.h>
+#include <ucontext.h>
+int main() { mcontext_t m; if (m->ss.srr0) return 0; return 0; }
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ gcc_cv_mcontext_underscores=no
+else
+ gcc_cv_mcontext_underscores=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_mcontext_underscores" >&5
+$as_echo "$gcc_cv_mcontext_underscores" >&6; }
+ if test $gcc_cv_mcontext_underscores = yes; then
+
+$as_echo "#define HAS_MCONTEXT_T_UNDERSCORES /**/" >>confdefs.h
+
+ fi
+ ;;
+esac
+
+# ---------
+# Threading
+# ---------
+
+# Check if a valid thread package
+case ${enable_threads} in
+ "" | no)
+ # No threads
+ target_thread_file='single'
+ ;;
+ yes)
+ # default
+ target_thread_file='single'
+ ;;
+ aix | dce | lynx | mipssde | posix | rtems | \
+ single | tpf | vxworks | win32)
+ target_thread_file=${enable_threads}
+ ;;
+ *)
+ echo "${enable_threads} is an unknown thread package" 1>&2
+ exit 1
+ ;;
+esac
+
+if test x${thread_file} = x; then
+ # No thread file set by target-specific clauses in config.gcc,
+ # so use file chosen by default logic above
+ thread_file=${target_thread_file}
+fi
+
+# --------
+# UNSORTED
+# --------
+
+use_cxa_atexit=no
+if test x$enable___cxa_atexit = xyes || \
+ test x$enable___cxa_atexit = x -a x$default_use_cxa_atexit = xyes; then
+ if test x$host = x$target; then
+ case $host in
+ # mingw32 doesn't have __cxa_atexit but uses atexit registration
+ # keyed to flag_use_cxa_atexit
+ *-*-mingw32*)
+ use_cxa_atexit=yes
+ ;;
+ powerpc-ibm-aix*)
+ use_cxa_atexit=yes
+ ;;
+ *)
+ ac_fn_cxx_check_func "$LINENO" "__cxa_atexit" "ac_cv_func___cxa_atexit"
+if test "x$ac_cv_func___cxa_atexit" = xyes; then :
+ use_cxa_atexit=yes
+else
+ echo "__cxa_atexit can't be enabled on this target"
+fi
+
+ ;;
+ esac
+ else
+ # We can't check for __cxa_atexit when building a cross, so assume
+ # it is available
+ use_cxa_atexit=yes
+ fi
+ if test x$use_cxa_atexit = xyes; then
+
+$as_echo "#define DEFAULT_USE_CXA_ATEXIT 2" >>confdefs.h
+
+ fi
+fi
+
+# Look for a file containing extra machine modes.
+if test -n "$extra_modes" && test -f $srcdir/config/$extra_modes; then
+ extra_modes_file='$(srcdir)'/config/${extra_modes}
+
+
+cat >>confdefs.h <<_ACEOF
+#define EXTRA_MODES_FILE "config/$extra_modes"
+_ACEOF
+
+fi
+
+# Convert extra_options into a form suitable for Makefile use.
+extra_opt_files=
+all_opt_files=
+for f in $extra_options; do
+ extra_opt_files="$extra_opt_files \$(srcdir)/config/$f"
+ all_opt_files="$all_opt_files $srcdir/config/$f"
+done
+
+
+# auto-host.h is the file containing items generated by autoconf and is
+# the first file included by config.h.
+# If host=build, it is correct to have bconfig include auto-host.h
+# as well. If host!=build, we are in error and need to do more
+# work to find out the build config parameters.
+if test x$host = x$build
+then
+ build_auto=auto-host.h
+ HAVE_AUTO_BUILD='# '
+else
+ # We create a subdir, then run autoconf in the subdir.
+ # To prevent recursion we set host and build for the new
+ # invocation of configure to the build for this invocation
+ # of configure.
+ tempdir=build.$$
+ rm -rf $tempdir
+ mkdir $tempdir
+ cd $tempdir
+ case ${srcdir} in
+ /* | A-Za-z:\\/* ) realsrcdir=${srcdir};;
+ *) realsrcdir=../${srcdir};;
+ esac
+ # Clearing GMPINC is necessary to prevent host headers being
+ # used by the build compiler. Defining GENERATOR_FILE stops
+ # system.h from including gmp.h.
+ CC="${CC_FOR_BUILD}" CFLAGS="${CFLAGS_FOR_BUILD}" \
+ CXX="${CXX_FOR_BUILD}" CXXFLAGS="${CXXFLAGS_FOR_BUILD}" \
+ LD="${LD_FOR_BUILD}" LDFLAGS="${LDFLAGS_FOR_BUILD}" \
+ GMPINC="" CPPFLAGS="${CPPFLAGS_FOR_BUILD} -DGENERATOR_FILE" \
+ ${realsrcdir}/configure \
+ --enable-languages=${enable_languages-all} \
+ ${enable_obsolete+--enable-obsolete="$enable_obsolete"} \
+ ${enable_option_checking+--enable-option-checking="$enable_option_checking"} \
+ --target=$target_alias --host=$build_alias \
+ --build=$build_alias || exit # retaining $tempdir
+
+ # We just finished tests for the build machine, so rename
+ # the file auto-build.h in the gcc directory.
+ mv auto-host.h ../auto-build.h
+ cd ..
+ rm -rf $tempdir
+ build_auto=auto-build.h
+ HAVE_AUTO_BUILD=
+fi
+
+
+
+tm_file="${tm_file} defaults.h"
+tm_p_file="${tm_p_file} tm-preds.h"
+tm_d_file="${tm_d_file} defaults.h"
+host_xm_file="auto-host.h ansidecl.h ${host_xm_file}"
+build_xm_file="${build_auto} ansidecl.h ${build_xm_file}"
+# We don't want ansidecl.h in target files, write code there in ISO/GNU C.
+# put this back in temporarily.
+xm_file="auto-host.h ansidecl.h ${xm_file}"
+
+# --------
+# UNSORTED
+# --------
+
+# Compile in configure arguments.
+if test -f configargs.h ; then
+ # Being re-configured.
+ gcc_config_arguments=`grep configuration_arguments configargs.h | sed -e 's/.*"\([^"]*\)".*/\1/'`
+ gcc_reconf_arguments=`echo "$gcc_config_arguments" | sed -e 's/^.*\( : (reconfigured) .*$\)/\1/'`
+ if [ "$gcc_reconf_arguments" != " : (reconfigured) $TOPLEVEL_CONFIGURE_ARGUMENTS" ]; then
+ gcc_config_arguments="$gcc_config_arguments : (reconfigured) $TOPLEVEL_CONFIGURE_ARGUMENTS"
+ fi
+else
+ gcc_config_arguments="$TOPLEVEL_CONFIGURE_ARGUMENTS"
+fi
+
+# Double all backslashes and backslash all quotes to turn
+# gcc_config_arguments into a C string.
+sed -e 's/\\/\\\\/g; s/"/\\"/g' <<EOF >conftest.out
+$gcc_config_arguments
+EOF
+gcc_config_arguments_str=`cat conftest.out`
+rm -f conftest.out
+
+cat > configargs.h <<EOF
+/* Generated automatically. */
+static const char configuration_arguments[] = "$gcc_config_arguments_str";
+static const char thread_model[] = "$thread_file";
+
+static const struct {
+ const char *name, *value;
+} configure_default_options[] = $configure_default_options;
+EOF
+
+gcc_BASEVER=`cat $srcdir/BASE-VER`
+gcc_DEVPHASE=`cat $srcdir/DEV-PHASE`
+gcc_DATESTAMP=`cat $srcdir/DATESTAMP`
+if test -f $srcdir/REVISION ; then
+ gcc_REVISION=`cat $srcdir/REVISION`
+else
+ gcc_REVISION=""
+fi
+cat > plugin-version.h <<EOF
+#include "configargs.h"
+
+#define GCCPLUGIN_VERSION_MAJOR `echo $gcc_BASEVER | sed -e 's/^\([0-9]*\).*$/\1/'`
+#define GCCPLUGIN_VERSION_MINOR `echo $gcc_BASEVER | sed -e 's/^[0-9]*\.\([0-9]*\).*$/\1/'`
+#define GCCPLUGIN_VERSION_PATCHLEVEL `echo $gcc_BASEVER | sed -e 's/^[0-9]*\.[0-9]*\.\([0-9]*\)$/\1/'`
+#define GCCPLUGIN_VERSION (GCCPLUGIN_VERSION_MAJOR*1000 + GCCPLUGIN_VERSION_MINOR)
+
+static char basever[] = "$gcc_BASEVER";
+static char datestamp[] = "$gcc_DATESTAMP";
+static char devphase[] = "$gcc_DEVPHASE";
+static char revision[] = "$gcc_REVISION";
+
+/* FIXME plugins: We should make the version information more precise.
+ One way to do is to add a checksum. */
+
+static struct plugin_gcc_version gcc_version = {basever, datestamp,
+ devphase, revision,
+ configuration_arguments};
+EOF
+
+# Determine what GCC version number to use in filesystem paths.
+
+ get_gcc_base_ver="cat"
+
+# Check whether --with-gcc-major-version-only was given.
+if test "${with_gcc_major_version_only+set}" = set; then :
+ withval=$with_gcc_major_version_only; if test x$with_gcc_major_version_only = xyes ; then
+ get_gcc_base_ver="sed -e 's/^\([0-9]*\).*/\1/'"
+ fi
+
+fi
+
+
+
+
+# Internationalization
+# If we haven't got the data from the intl directory,
+# assume NLS is disabled.
+USE_NLS=no
+LIBINTL=
+LIBINTL_DEP=
+INCINTL=
+XGETTEXT=
+GMSGFMT=
+POSUB=
+
+if test -f ../intl/config.intl; then
+ . ../intl/config.intl
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5
+$as_echo_n "checking whether NLS is requested... " >&6; }
+if test x"$USE_NLS" != xyes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+$as_echo "#define ENABLE_NLS 1" >>confdefs.h
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for catalogs to be installed" >&5
+$as_echo_n "checking for catalogs to be installed... " >&6; }
+ # Look for .po and .gmo files in the source directory.
+ CATALOGS=
+ XLINGUAS=
+ for cat in $srcdir/po/*.gmo $srcdir/po/*.po; do
+ # If there aren't any .gmo files the shell will give us the
+ # literal string "../path/to/srcdir/po/*.gmo" which has to be
+ # weeded out.
+ case "$cat" in *\**)
+ continue;;
+ esac
+ # The quadruple backslash is collapsed to a double backslash
+ # by the backticks, then collapsed again by the double quotes,
+ # leaving us with one backslash in the sed expression (right
+ # before the dot that mustn't act as a wildcard).
+ cat=`echo $cat | sed -e "s!$srcdir/po/!!" -e "s!\\\\.po!.gmo!"`
+ lang=`echo $cat | sed -e "s!\\\\.gmo!!"`
+ # The user is allowed to set LINGUAS to a list of languages to
+ # install catalogs for. If it's empty that means "all of them."
+ if test "x$LINGUAS" = x; then
+ CATALOGS="$CATALOGS $cat"
+ XLINGUAS="$XLINGUAS $lang"
+ else
+ case "$LINGUAS" in *$lang*)
+ CATALOGS="$CATALOGS $cat"
+ XLINGUAS="$XLINGUAS $lang"
+ ;;
+ esac
+ fi
+ done
+ LINGUAS="$XLINGUAS"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LINGUAS" >&5
+$as_echo "$LINGUAS" >&6; }
+
+
+ DATADIRNAME=share
+
+ INSTOBJEXT=.mo
+
+ GENCAT=gencat
+
+ CATOBJEXT=.gmo
+
+fi
+
+# If LIBINTL contains LIBICONV, then clear LIBICONV so we don't get
+# -liconv on the link line twice.
+case "$LIBINTL" in *$LIBICONV*)
+ LIBICONV= ;;
+esac
+
+# Check whether --enable-secureplt was given.
+if test "${enable_secureplt+set}" = set; then :
+ enableval=$enable_secureplt;
+fi
+
+
+# Check whether --enable-mingw-wildcard was given.
+if test "${enable_mingw_wildcard+set}" = set; then :
+ enableval=$enable_mingw_wildcard;
+else
+ enable_mingw_wildcard=platform
+fi
+
+if test x"$enable_mingw_wildcard" != xplatform ; then :
+
+cat >>confdefs.h <<_ACEOF
+#define MINGW_DOWILDCARD $(test x"$enable_mingw_wildcard" = xno; echo $?)
+_ACEOF
+
+fi
+
+# Check whether --enable-large-address-aware was given.
+if test "${enable_large_address_aware+set}" = set; then :
+ enableval=$enable_large_address_aware;
+fi
+
+if test x"$enable_large_address_aware" = xyes; then :
+
+$as_echo "#define MINGW_DEFAULT_LARGE_ADDR_AWARE 1" >>confdefs.h
+
+fi
+
+# Check whether --enable-leading-mingw64-underscores was given.
+if test "${enable_leading_mingw64_underscores+set}" = set; then :
+ enableval=$enable_leading_mingw64_underscores;
+fi
+
+if test x"$enable_leading_mingw64_underscores" = xyes ; then :
+
+$as_echo "#define USE_MINGW64_LEADING_UNDERSCORES 1" >>confdefs.h
+
+fi
+
+# Check whether --enable-cld was given.
+if test "${enable_cld+set}" = set; then :
+ enableval=$enable_cld;
+else
+ enable_cld=no
+fi
+
+
+# Check whether --enable-frame-pointer was given.
+if test "${enable_frame_pointer+set}" = set; then :
+ enableval=$enable_frame_pointer;
+else
+
+case $target_os in
+linux* | gnu* | darwin[8912]* | cygwin* | mingw*)
+ # Enable -fomit-frame-pointer by default for these systems with DWARF2.
+ enable_frame_pointer=no
+ ;;
+*)
+ enable_frame_pointer=yes
+ ;;
+esac
+
+fi
+
+
+case $target in
+i[34567]86-*-* | x86_64-*-*)
+ if test "x$enable_cld" = xyes; then
+ tm_defines="${tm_defines} USE_IX86_CLD=1"
+ fi
+ if test "x$enable_frame_pointer" = xyes; then
+ tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
+ fi
+ ;;
+esac
+
+# Windows32 Registry support for specifying GCC installation paths.
+# Check whether --enable-win32-registry was given.
+if test "${enable_win32_registry+set}" = set; then :
+ enableval=$enable_win32_registry;
+fi
+
+
+case $host_os in
+ win32 | pe | cygwin* | mingw32*)
+ if test "x$enable_win32_registry" != xno; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing RegOpenKeyExA" >&5
+$as_echo_n "checking for library containing RegOpenKeyExA... " >&6; }
+if ${ac_cv_search_RegOpenKeyExA+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char RegOpenKeyExA ();
+int
+main ()
+{
+return RegOpenKeyExA ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' advapi32; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_cxx_try_link "$LINENO"; then :
+ ac_cv_search_RegOpenKeyExA=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_RegOpenKeyExA+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_RegOpenKeyExA+:} false; then :
+
+else
+ ac_cv_search_RegOpenKeyExA=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_RegOpenKeyExA" >&5
+$as_echo "$ac_cv_search_RegOpenKeyExA" >&6; }
+ac_res=$ac_cv_search_RegOpenKeyExA
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+else
+ enable_win32_registry=no
+fi
+
+ fi
+
+ if test "x$enable_win32_registry" != xno; then
+
+$as_echo "#define ENABLE_WIN32_REGISTRY 1" >>confdefs.h
+
+
+ if test "x$enable_win32_registry" != xyes \
+ && test "x$enable_win32_registry" != x; then
+
+cat >>confdefs.h <<_ACEOF
+#define WIN32_REGISTRY_KEY "$enable_win32_registry"
+_ACEOF
+
+ fi
+ fi
+ ;;
+esac
+
+# Get an absolute path to the GCC top-level source directory
+holddir=`${PWDCMD-pwd}`
+cd $srcdir
+topdir=`${PWDCMD-pwd}`
+cd $holddir
+
+# Conditionalize the makefile for this host machine.
+xmake_file=
+for f in ${host_xmake_file}
+do
+ if test -f ${srcdir}/config/$f
+ then
+ xmake_file="${xmake_file} \$(srcdir)/config/$f"
+ fi
+done
+
+# Conditionalize the makefile for this target machine.
+tmake_file_=
+for f in ${tmake_file}
+do
+ if test -f ${srcdir}/config/$f
+ then
+ tmake_file_="${tmake_file_} \$(srcdir)/config/$f"
+ fi
+done
+tmake_file="${tmake_file_}${omp_device_property_tmake_file}"
+
+out_object_file=`basename $out_file .cc`.o
+common_out_object_file=`basename $common_out_file .cc`.o
+
+tm_file_list="options.h"
+tm_include_list="options.h insn-constants.h"
+for f in $tm_file; do
+ case $f in
+ ./* )
+ f=`echo $f | sed 's/^..//'`
+ tm_file_list="${tm_file_list} $f"
+ tm_include_list="${tm_include_list} $f"
+ ;;
+ defaults.h )
+ tm_file_list="${tm_file_list} \$(srcdir)/$f"
+ tm_include_list="${tm_include_list} $f"
+ ;;
+ * )
+ tm_file_list="${tm_file_list} \$(srcdir)/config/$f"
+ tm_include_list="${tm_include_list} config/$f"
+ ;;
+ esac
+done
+
+tm_p_file_list=
+tm_p_include_list=
+for f in $tm_p_file; do
+ case $f in
+ tm-preds.h )
+ tm_p_file_list="${tm_p_file_list} $f"
+ tm_p_include_list="${tm_p_include_list} $f"
+ ;;
+ * )
+ tm_p_file_list="${tm_p_file_list} \$(srcdir)/config/$f"
+ tm_p_include_list="${tm_p_include_list} config/$f"
+ esac
+done
+
+tm_d_file_list=
+tm_d_include_list="options.h insn-constants.h"
+for f in $tm_d_file; do
+ case $f in
+ defaults.h )
+ tm_d_file_list="${tm_d_file_list} \$(srcdir)/$f"
+ tm_d_include_list="${tm_d_include_list} $f"
+ ;;
+ * )
+ tm_d_file_list="${tm_d_file_list} \$(srcdir)/config/$f"
+ tm_d_include_list="${tm_d_include_list} config/$f"
+ ;;
+ esac
+done
+
+xm_file_list=
+xm_include_list=
+for f in $xm_file; do
+ case $f in
+ ansidecl.h )
+ xm_file_list="${xm_file_list} \$(srcdir)/../include/$f"
+ xm_include_list="${xm_include_list} $f"
+ ;;
+ auto-host.h )
+ xm_file_list="${xm_file_list} $f"
+ xm_include_list="${xm_include_list} $f"
+ ;;
+ * )
+ xm_file_list="${xm_file_list} \$(srcdir)/config/$f"
+ xm_include_list="${xm_include_list} config/$f"
+ ;;
+ esac
+done
+
+host_xm_file_list=
+host_xm_include_list=
+for f in $host_xm_file; do
+ case $f in
+ ansidecl.h )
+ host_xm_file_list="${host_xm_file_list} \$(srcdir)/../include/$f"
+ host_xm_include_list="${host_xm_include_list} $f"
+ ;;
+ auto-host.h )
+ host_xm_file_list="${host_xm_file_list} $f"
+ host_xm_include_list="${host_xm_include_list} $f"
+ ;;
+ * )
+ host_xm_file_list="${host_xm_file_list} \$(srcdir)/config/$f"
+ host_xm_include_list="${host_xm_include_list} config/$f"
+ ;;
+ esac
+done
+
+build_xm_file_list=
+for f in $build_xm_file; do
+ case $f in
+ ansidecl.h )
+ build_xm_file_list="${build_xm_file_list} \$(srcdir)/../include/$f"
+ build_xm_include_list="${build_xm_include_list} $f"
+ ;;
+ auto-build.h | auto-host.h )
+ build_xm_file_list="${build_xm_file_list} $f"
+ build_xm_include_list="${build_xm_include_list} $f"
+ ;;
+ * )
+ build_xm_file_list="${build_xm_file_list} \$(srcdir)/config/$f"
+ build_xm_include_list="${build_xm_include_list} config/$f"
+ ;;
+ esac
+done
+
+# Define macro CROSS_DIRECTORY_STRUCTURE in compilation if this is a
+# cross-compiler which does not use the native headers and libraries.
+# Also use all.cross instead of all.internal and adjust SYSTEM_HEADER_DIR.
+CROSS=
+ALL=all.internal
+SYSTEM_HEADER_DIR='$(NATIVE_SYSTEM_HEADER_DIR)'
+BUILD_SYSTEM_HEADER_DIR=$SYSTEM_HEADER_DIR
+
+if test x$host != x$target || test "x$TARGET_SYSTEM_ROOT" != x ||
+ test x$build != x$host || test "x$with_build_sysroot" != x; then
+ if test "x$with_build_sysroot" != x; then
+ BUILD_SYSTEM_HEADER_DIR=$with_build_sysroot'$${sysroot_headers_suffix}$(NATIVE_SYSTEM_HEADER_DIR)'
+ else
+ BUILD_SYSTEM_HEADER_DIR='$(CROSS_SYSTEM_HEADER_DIR)'
+ fi
+
+ if test x$host != x$target
+ then
+ CROSS="-DCROSS_DIRECTORY_STRUCTURE"
+ ALL=all.cross
+ SYSTEM_HEADER_DIR=$BUILD_SYSTEM_HEADER_DIR
+ elif test "x$TARGET_SYSTEM_ROOT" != x; then
+ SYSTEM_HEADER_DIR='$(CROSS_SYSTEM_HEADER_DIR)'
+ fi
+
+ if test "x$with_build_sysroot" != "x"; then
+ target_header_dir="${with_build_sysroot}${native_system_header_dir}"
+ elif test "x$with_sysroot" = x; then
+ target_header_dir="${test_exec_prefix}/${target_noncanonical}/sys-include"
+ elif test "x$with_sysroot" = xyes; then
+ target_header_dir="${test_exec_prefix}/${target_noncanonical}/sys-root${native_system_header_dir}"
+ else
+ target_header_dir="${with_sysroot}${native_system_header_dir}"
+ fi
+else
+ target_header_dir=${native_system_header_dir}
+fi
+
+# If this is a cross-compiler that does not
+# have its own set of headers then define
+# inhibit_libc
+
+# If this is using newlib, without having the headers available now,
+# then define inhibit_libc in LIBGCC2_CFLAGS.
+# This prevents libgcc2 from containing any code which requires libc
+# support.
+: ${inhibit_libc=false}
+if { { test x$host != x$target && test "x$with_sysroot" = x ; } ||
+ test x$with_newlib = xyes ; } &&
+ { test "x$with_headers" = xno || test ! -f "$target_header_dir/stdio.h"; } ; then
+ inhibit_libc=true
+fi
+
+
+# When building gcc with a cross-compiler, we need to adjust things so
+# that the generator programs are still built with the native compiler.
+# Also, we cannot run fixincludes.
+
+# These are the normal (build=host) settings:
+CC_FOR_BUILD='$(CC)'
+CXX_FOR_BUILD='$(CXX)'
+BUILD_CFLAGS='$(ALL_CFLAGS)'
+BUILD_CXXFLAGS='$(ALL_CXXFLAGS)'
+BUILD_LDFLAGS='$(LDFLAGS)'
+STMP_FIXINC=stmp-fixinc
+
+# And these apply if build != host, or we are generating coverage data
+if test x$build != x$host || test "x$coverage_flags" != x
+then
+ BUILD_CFLAGS='$(INTERNAL_CFLAGS) $(T_CFLAGS) $(CFLAGS-$@) $(CFLAGS_FOR_BUILD)'
+ BUILD_CXXFLAGS='$(INTERNAL_CFLAGS) $(T_CFLAGS) $(CFLAGS-$@) $(CXXFLAGS_FOR_BUILD)'
+ BUILD_LDFLAGS='$(LDFLAGS_FOR_BUILD)'
+fi
+
+# Expand extra_headers to include complete path.
+# This substitutes for lots of t-* files.
+extra_headers_list=
+# Prepend $(srcdir)/config/${cpu_type}/ to every entry in extra_headers.
+for file in ${extra_headers} ; do
+ extra_headers_list="${extra_headers_list} \$(srcdir)/config/${cpu_type}/${file}"
+done
+
+# If use_gcc_tgmath is set, append ginclude/tgmath.h.
+if test x"$use_gcc_tgmath" = xyes
+then extra_headers_list="${extra_headers_list} \$(srcdir)/ginclude/tgmath.h"
+fi
+
+# Define collect2 in Makefile.
+case $host_can_use_collect2 in
+ no) collect2= ;;
+ *) collect2='collect2$(exeext)' ;;
+esac
+
+
+# Add a definition of USE_COLLECT2 if system wants one.
+case $use_collect2 in
+ no) use_collect2= ;;
+ "") ;;
+ *)
+ host_xm_defines="${host_xm_defines} USE_COLLECT2"
+ xm_defines="${xm_defines} USE_COLLECT2"
+ case $host_can_use_collect2 in
+ no)
+ as_fn_error $? "collect2 is required but cannot be built on this system" "$LINENO" 5
+ ;;
+ esac
+ ;;
+esac
+
+
+cat >>confdefs.h <<_ACEOF
+#define LTOPLUGINSONAME "${host_lto_plugin_soname}"
+_ACEOF
+
+
+# ---------------------------
+# Assembler & linker features
+# ---------------------------
+
+# During stage 2, ld is actually gcc/collect-ld, which is a small script to
+# discern between when to use prev-ld/ld-new and when to use ld/ld-new.
+# However when ld-new is first executed from the build tree, libtool will
+# relink it as .libs/lt-ld-new, so that it can give it an RPATH that refers
+# to the build tree. While doing this we need to use the previous-stage
+# linker, or we have an infinite loop. The presence of a shell script as
+# ld/ld-new, and the fact that the script *uses ld itself*, is what confuses
+# the gcc/collect-ld script. So we need to know how libtool works, or
+# exec-tool will fail.
+
+
+case `pwd` in
+ *\ * | *\ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.2.7a'
+macro_revision='1.3134'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`print -r -- -n 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO ""
+}
+
+case "$ECHO" in
+ printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+ print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+ *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for ac_i in 1 2 3 4 5 6 7; do
+ ac_script="$ac_script$as_nl$ac_script"
+ done
+ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+ { ac_script=; unset ac_script;}
+ if test -z "$SED"; then
+ ac_path_SED_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+ # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo '' >> "conftest.nl"
+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_SED_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_SED="$ac_path_SED"
+ ac_path_SED_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_SED_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_SED"; then
+ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ fi
+else
+ ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+ rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+ then ac_cv_path_FGREP="$GREP -F"
+ else
+ if test -z "$FGREP"; then
+ ac_path_FGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in fgrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_FGREP" || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+ # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'FGREP' >> "conftest.nl"
+ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_FGREP="$ac_path_FGREP"
+ ac_path_FGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_FGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_FGREP"; then
+ as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_FGREP=$FGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | ?:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/$lt_tmp_nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in dumpbin "link -dump"
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DUMPBIN"; then
+ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$DUMPBIN" && break
+ done
+fi
+if test -z "$DUMPBIN"; then
+ ac_ct_DUMPBIN=$DUMPBIN
+ for ac_prog in dumpbin "link -dump"
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DUMPBIN"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_DUMPBIN" && break
+done
+
+ if test "x$ac_ct_DUMPBIN" = x; then
+ DUMPBIN=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DUMPBIN=$ac_ct_DUMPBIN
+ fi
+fi
+
+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
+
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+ cat conftest.out >&5
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+ ac_ct_OBJDUMP=$OBJDUMP
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OBJDUMP"; then
+ ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OBJDUMP="objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OBJDUMP" = x; then
+ OBJDUMP="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OBJDUMP=$ac_ct_OBJDUMP
+ fi
+else
+ OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[45]*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[3-9]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | uclinuxfdpiceabi)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AR="ar"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_AR" = x; then
+ AR="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+else
+ AR="$ac_cv_prog_AR"
+fi
+
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ RANLIB=$ac_ct_RANLIB
+ fi
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[BCDT]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[ABCDGISTW]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[ABCDEGRST]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[BCDEGRST]'
+ ;;
+osf*)
+ symcode='[BCDEGQRST]'
+ ;;
+solaris*)
+ symcode='[BDRT]'
+ ;;
+sco3.2v5*)
+ symcode='[DT]'
+ ;;
+sysv4.2uw2*)
+ symcode='[DT]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[ABDT]'
+ ;;
+sysv4)
+ symcode='[DFNSTU]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK '"\
+" {last_section=section; section=\$ 3};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+ (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_save_LIBS="$LIBS"
+ lt_save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS="$lt_save_LIBS"
+ CFLAGS="$lt_save_CFLAGS"
+ else
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&5
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+ fi
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+ enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ case `/usr/bin/file conftest.o` in
+ *x86-64*)
+ LD="${LD-ld} -m elf32_x86_64"
+ ;;
+ *)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ esac
+ ;;
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
+ ;;
+ powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_cc_needs_belf=yes
+else
+ lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+sparc*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*) LD="${LD-ld} -m elf64_sparc" ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+
+ case $host_os in
+ rhapsody* | darwin*)
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DSYMUTIL"; then
+ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+ ac_ct_DSYMUTIL=$DSYMUTIL
+ # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DSYMUTIL"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DSYMUTIL" = x; then
+ DSYMUTIL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DSYMUTIL=$ac_ct_DSYMUTIL
+ fi
+else
+ DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NMEDIT"; then
+ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+ ac_ct_NMEDIT=$NMEDIT
+ # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_NMEDIT"; then
+ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_NMEDIT="nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_NMEDIT" = x; then
+ NMEDIT=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ NMEDIT=$ac_ct_NMEDIT
+ fi
+else
+ NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+ ac_ct_LIPO=$LIPO
+ # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_LIPO"; then
+ ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_LIPO="lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_LIPO" = x; then
+ LIPO=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ LIPO=$ac_ct_LIPO
+ fi
+else
+ LIPO="$ac_cv_prog_LIPO"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL"; then
+ ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+ ac_ct_OTOOL=$OTOOL
+ # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OTOOL"; then
+ ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OTOOL="otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OTOOL" = x; then
+ OTOOL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL=$ac_ct_OTOOL
+ fi
+else
+ OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL64"; then
+ ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+ ac_ct_OTOOL64=$OTOOL64
+ # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OTOOL64"; then
+ ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OTOOL64="otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OTOOL64" = x; then
+ OTOOL64=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL64=$ac_ct_OTOOL64
+ fi
+else
+ OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_ld_exported_symbols_list=yes
+else
+ lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+ echo "$AR cru libconftest.a conftest.o" >&5
+ $AR cru libconftest.a conftest.o 2>&5
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+ # Allow for Darwin 4-7 (macOS 10.0-10.3) although these are not expect to
+ # build without first building modern cctools / linker.
+ case $host_cpu-$host_os in
+ *-rhapsody* | *-darwin1.[012])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ *-darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ *-darwin*)
+ # darwin 5.x (macOS 10.1) onwards we only need to adjust when the
+ # deployment target is forced to an earlier version.
+ case ${MACOSX_DEPLOYMENT_TARGET-UNSET},$host in
+ UNSET,*-darwin[89]*|UNSET,*-darwin[12][0123456789]*)
+ ;;
+ 10.[012][,.]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+
+
+for ac_header in dlfcn.h
+do :
+ ac_fn_c_check_header_preproc "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+done
+
+
+
+
+
+# Set options
+
+
+
+ enable_dlopen=no
+
+
+ enable_win32_dll=no
+
+
+ # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+ enableval=$enable_shared; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+ # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+ enableval=$enable_static; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+ withval=$with_pic; pic_mode="$withval"
+else
+ pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+ # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+ enableval=$enable_fast_install; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+ case $cc_basename in
+ nvcc*)
+ lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+ *)
+ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+ esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_rtti_exceptions=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="-fno-rtti -fno-exceptions"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_rtti_exceptions=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+ :
+fi
+
+fi
+
+
+
+
+
+
+ lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+
+ if test "$GCC" = yes; then
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_static='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ ;;
+
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ lt_prog_compiler_static=
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[3-9]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ lt_prog_compiler_can_build_shared=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ lt_prog_compiler_wl='-Xlinker '
+ lt_prog_compiler_pic='-Xcompiler -fPIC'
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ lt_prog_compiler_wl='-Wl,'
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ else
+ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ lt_prog_compiler_static='${wl}-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC (with -KPIC) is the default.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='--shared'
+ lt_prog_compiler_static='--static'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ ccc*)
+ lt_prog_compiler_wl='-Wl,'
+ # All Alpha code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-qpic'
+ lt_prog_compiler_static='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ F* | *Sun*Fortran*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl=''
+ ;;
+ *Sun\ C*)
+ # Sun C 5.9
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl='-Wl,'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ lt_prog_compiler_wl='-Wl,'
+ # All OSF/1 code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ rdos*)
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ solaris*)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95*)
+ lt_prog_compiler_wl='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ lt_prog_compiler_wl='-Qoption ld '
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ lt_prog_compiler_pic='-Kconform_pic'
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ unicos*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_can_build_shared=no
+ ;;
+
+ uts4*)
+ lt_prog_compiler_pic='-pic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *)
+ lt_prog_compiler_can_build_shared=no
+ ;;
+ esac
+ fi
+
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic=
+ ;;
+ *)
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
+$as_echo "$lt_prog_compiler_pic" >&6; }
+
+
+
+
+
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic_works=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_pic_works=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+ case $lt_prog_compiler_pic in
+ "" | " "*) ;;
+ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+ esac
+else
+ lt_prog_compiler_pic=
+ lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_static_works=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ else
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+ :
+else
+ lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+ if test "$hard_links" = no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+ runpath_var=
+ allow_undefined_flag=
+ always_export_symbols=no
+ archive_cmds=
+ archive_expsym_cmds=
+ compiler_needs_object=no
+ enable_shared_with_static_runtimes=no
+ export_dynamic_flag_spec=
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ hardcode_automatic=no
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_flag_spec_ld=
+ hardcode_libdir_separator=
+ hardcode_minus_L=no
+ hardcode_shlibpath_var=unsupported
+ inherit_rpath=no
+ link_all_deplibs=unknown
+ module_cmds=
+ module_expsym_cmds=
+ old_archive_from_new_cmds=
+ old_archive_from_expsyms_cmds=
+ thread_safe_flag_spec=
+ whole_archive_flag_spec=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ include_expsyms=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+ # as well as any symbol that contains `d'.
+ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ ld_shlibs=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
+ if test "$with_gnu_ld" = yes; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+ *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test "$lt_use_gnu_ld_interface" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[3-9]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ export_dynamic_flag_spec='${wl}--export-all-symbols'
+ allow_undefined_flag=unsupported
+ always_export_symbols=no
+ enable_shared_with_static_runtimes=yes
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ haiku*)
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ link_all_deplibs=yes
+ ;;
+
+ interix[3-9]*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu | uclinuxfdpiceabi)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ whole_archive_flag_spec=
+ tmp_sharedflag='--shared' ;;
+ xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf* | bgf* | bgxlf* | mpixlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_flag_spec_ld='-rpath $libdir'
+ archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+
+ if test "$ld_shlibs" = no; then
+ runpath_var=
+ hardcode_libdir_flag_spec=
+ export_dynamic_flag_spec=
+ whole_archive_flag_spec=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global
+ # defined symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ archive_cmds=''
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ file_list_spec='${wl}-f,'
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ export_dynamic_flag_spec='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ always_export_symbols=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag="-z nodefs"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ no_undefined_flag=' ${wl}-bernotok'
+ allow_undefined_flag=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec='$convenience'
+ fi
+ archive_cmds_need_lc=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ bsdi[45]*)
+ export_dynamic_flag_spec=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ fix_srcfile_path='`cygpath -w "$srcfile"`'
+ enable_shared_with_static_runtimes=yes
+ ;;
+
+ darwin* | rhapsody*)
+
+
+ archive_cmds_need_lc=no
+ hardcode_direct=no
+ hardcode_automatic=yes
+ hardcode_shlibpath_var=unsupported
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ else
+ whole_archive_flag_spec=''
+ fi
+ link_all_deplibs=yes
+ allow_undefined_flag="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=func_echo_all
+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+ else
+ ld_shlibs=no
+ fi
+
+ ;;
+
+ dgux*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2.*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ export_dynamic_flag_spec='${wl}-E'
+ ;;
+
+ hpux10*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_flag_spec_ld='+b $libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler__b=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -b"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler__b=yes
+ fi
+ else
+ lt_cv_prog_compiler__b=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ ;;
+ *)
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int foo(void) {}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ inherit_rpath=yes
+ link_all_deplibs=yes
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ newsos6)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_shlibpath_var=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ hardcode_direct_absolute=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ else
+ case $host_os in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_separator=:
+ ;;
+
+ solaris*)
+ no_undefined_flag=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+ archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ link_all_deplibs=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ reload_cmds='$CC -r -o $output$reload_objs'
+ hardcode_direct=no
+ ;;
+ motorola)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4.3*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ export_dynamic_flag_spec='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ld_shlibs=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ no_undefined_flag='${wl}-z,text'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ no_undefined_flag='${wl}-z,text'
+ allow_undefined_flag='${wl}-z,nodefs'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-R,$libdir'
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ export_dynamic_flag_spec='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ export_dynamic_flag_spec='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+ # Assume -lc should be added
+ archive_cmds_need_lc=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $archive_cmds in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl
+ pic_flag=$lt_prog_compiler_pic
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ then
+ lt_cv_archive_cmds_need_lc=no
+ else
+ lt_cv_archive_cmds_need_lc=yes
+ fi
+ allow_undefined_flag=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+ archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+ *) lt_sed_strip_eq="s,=/,/,g" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[lt_foo]++; }
+ if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix[4-9]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[01] | aix4.[01].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[45]*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$host_os in
+ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ ;;
+
+ *)
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[23].*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2.*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+haiku*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
+
+interix[3-9]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be Linux ELF.
+
+# uclinux* changes (here and below) have been submitted to the libtool
+# project, but have not yet been accepted: they are GCC-local changes
+# for the time being. (See
+# https://lists.gnu.org/archive/html/libtool-patches/2018-05/msg00000.html)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu* | uclinuxfdpiceabi)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+ lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
+fi
+
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[89] | openbsd2.[89].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+ test -n "$runpath_var" ||
+ test "X$hardcode_automatic" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$hardcode_direct" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+ test "$hardcode_minus_L" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+ test "$inherit_rpath" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+
+
+
+
+
+ if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+
+fi
+
+ ;;
+
+ *)
+ ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+ lt_cv_dlopen="shl_load"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_shl_load=yes
+else
+ ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+ ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_svld_dlopen=yes
+else
+ ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_dld_link=yes
+else
+ ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+ ;;
+ esac
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS="$LDFLAGS"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line 19676 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+void fnord () __attribute__((visibility("default")));
+#endif
+
+void fnord () { int i=42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self_static=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line 19782 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+void fnord () __attribute__((visibility("default")));
+#endif
+
+void fnord () { int i=42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self_static=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+ # Report which library types will actually be built
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+CC="$lt_save_CC"
+
+ if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+ ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
+$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
+if test -z "$CXXCPP"; then
+ if ${ac_cv_prog_CXXCPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CXXCPP needs to be expanded
+ for CXXCPP in "$CXX -E" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+ CXXCPP=$ac_cv_prog_CXXCPP
+else
+ ac_cv_prog_CXXCPP=$CXXCPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
+$as_echo "$CXXCPP" >&6; }
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+else
+ _lt_caught_CXX_error=yes
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+archive_cmds_need_lc_CXX=no
+allow_undefined_flag_CXX=
+always_export_symbols_CXX=no
+archive_expsym_cmds_CXX=
+compiler_needs_object_CXX=no
+export_dynamic_flag_spec_CXX=
+hardcode_direct_CXX=no
+hardcode_direct_absolute_CXX=no
+hardcode_libdir_flag_spec_CXX=
+hardcode_libdir_flag_spec_ld_CXX=
+hardcode_libdir_separator_CXX=
+hardcode_minus_L_CXX=no
+hardcode_shlibpath_var_CXX=unsupported
+hardcode_automatic_CXX=no
+inherit_rpath_CXX=no
+module_cmds_CXX=
+module_expsym_cmds_CXX=
+link_all_deplibs_CXX=unknown
+old_archive_cmds_CXX=$old_archive_cmds
+reload_flag_CXX=$reload_flag
+reload_cmds_CXX=$reload_cmds
+no_undefined_flag_CXX=
+whole_archive_flag_spec_CXX=
+enable_shared_with_static_runtimes_CXX=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+objext_CXX=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="int some_variable = 0;"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+ # save warnings/boilerplate of simple test code
+ ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+ lt_save_with_gnu_ld=$with_gnu_ld
+ lt_save_path_LD=$lt_cv_path_LD
+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+ $as_unset lt_cv_prog_gnu_ld
+ fi
+ if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+ $as_unset lt_cv_path_LD
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
+ compiler=$CC
+ compiler_CXX=$CC
+ for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+ if test -n "$compiler"; then
+ # We don't want -fno-exception when compiling C++ code, so set the
+ # no_builtin_flag separately
+ if test "$GXX" = yes; then
+ lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
+ else
+ lt_prog_compiler_no_builtin_flag_CXX=
+ fi
+
+ if test "$GXX" = yes; then
+ # Set up default GNU C++ configuration
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | ?:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+ archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='${wl}'
+
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+ $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec_CXX=
+ fi
+ else
+ with_gnu_ld=no
+ wlarc=
+
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ GXX=no
+ with_gnu_ld=no
+ wlarc=
+ fi
+
+ # PORTME: fill in a description of your system's C++ link characteristics
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+ ld_shlibs_CXX=yes
+ case $host_os in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ aix[4-9]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ case $ld_flag in
+ *-brtl*)
+ aix_use_runtimelinking=yes
+ break
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ archive_cmds_CXX=''
+ hardcode_direct_CXX=yes
+ hardcode_direct_absolute_CXX=yes
+ hardcode_libdir_separator_CXX=':'
+ link_all_deplibs_CXX=yes
+ file_list_spec_CXX='${wl}-f,'
+
+ if test "$GXX" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct_CXX=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L_CXX=yes
+ hardcode_libdir_flag_spec_CXX='-L$libdir'
+ hardcode_libdir_separator_CXX=
+ fi
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ export_dynamic_flag_spec_CXX='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to
+ # export.
+ always_export_symbols_CXX=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag_CXX='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+ archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag_CXX="-z nodefs"
+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ no_undefined_flag_CXX=' ${wl}-bernotok'
+ allow_undefined_flag_CXX=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec_CXX='$convenience'
+ fi
+ archive_cmds_need_lc_CXX=yes
+ # This is similar to how AIX traditionally builds its shared
+ # libraries.
+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag_CXX=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs_CXX=no
+ fi
+ ;;
+
+ chorus*)
+ case $cc_basename in
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec_CXX='-L$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-all-symbols'
+ allow_undefined_flag_CXX=unsupported
+ always_export_symbols_CXX=no
+ enable_shared_with_static_runtimes_CXX=yes
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ darwin* | rhapsody*)
+
+
+ archive_cmds_need_lc_CXX=no
+ hardcode_direct_CXX=no
+ hardcode_automatic_CXX=yes
+ hardcode_shlibpath_var_CXX=unsupported
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ else
+ whole_archive_flag_spec_CXX=''
+ fi
+ link_all_deplibs_CXX=yes
+ allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=func_echo_all
+ archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+ archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+ fi
+
+ else
+ ld_shlibs_CXX=no
+ fi
+
+ ;;
+
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ freebsd2.*)
+ # C++ shared libraries reported to be fairly broken before
+ # switch to ELF
+ ld_shlibs_CXX=no
+ ;;
+
+ freebsd-elf*)
+ archive_cmds_need_lc_CXX=no
+ ;;
+
+ freebsd* | dragonfly*)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ ld_shlibs_CXX=yes
+ ;;
+
+ gnu*)
+ ;;
+
+ haiku*)
+ archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ link_all_deplibs_CXX=yes
+ ;;
+
+ hpux9*)
+ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ hardcode_direct_CXX=yes
+ hardcode_minus_L_CXX=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ aCC*)
+ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+
+ hpux10*|hpux11*)
+ if test $with_gnu_ld = no; then
+ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ ;;
+ *)
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ ;;
+ esac
+ fi
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ ;;
+ *)
+ hardcode_direct_CXX=yes
+ hardcode_direct_absolute_CXX=yes
+ hardcode_minus_L_CXX=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ esac
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ aCC*)
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test $with_gnu_ld = no; then
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+ else
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+
+ interix[3-9]*)
+ hardcode_direct_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+ irix5* | irix6*)
+ case $cc_basename in
+ CC*)
+ # SGI C++
+ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ fi
+ fi
+ link_all_deplibs_CXX=yes
+ ;;
+ esac
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+ inherit_rpath_CXX=yes
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ icpc* | ecpc* )
+ # Intel C++
+ with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+ archive_cmds_need_lc_CXX=no
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+ whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+ *pgCC\ [1-5].* | *pgcpp\ [1-5].*)
+ prelink_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ old_archive_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
+ archive_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ archive_expsym_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ *) # Version 6 and above use weak symbols
+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ esac
+
+ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+ whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+ hardcode_libdir_separator_CXX=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ ;;
+ xl* | mpixl* | bgxl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+ archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ no_undefined_flag_CXX=' -zdefs'
+ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ hardcode_libdir_flag_spec_CXX='-R$libdir'
+ whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object_CXX=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ lynxos*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+
+ m88k*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+ hardcode_libdir_flag_spec_CXX='-R$libdir'
+ hardcode_direct_CXX=yes
+ hardcode_shlibpath_var_CXX=no
+ fi
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+ ;;
+
+ *nto* | *qnx*)
+ ld_shlibs_CXX=yes
+ ;;
+
+ openbsd2*)
+ # C++ shared libraries are fairly broken
+ ld_shlibs_CXX=no
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct_CXX=yes
+ hardcode_shlibpath_var_CXX=no
+ hardcode_direct_absolute_CXX=yes
+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+ output_verbose_link_cmd=func_echo_all
+ else
+ ld_shlibs_CXX=no
+ fi
+ ;;
+
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ hardcode_libdir_separator_CXX=:
+
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ case $host in
+ osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;;
+ *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;;
+ esac
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ cxx*)
+ case $host in
+ osf3*)
+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ ;;
+ *)
+ allow_undefined_flag_CXX=' -expect_unresolved \*'
+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+ $RM $lib.exp'
+ hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+ ;;
+ esac
+
+ hardcode_libdir_separator_CXX=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+ case $host in
+ osf3*)
+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
+
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+
+ psos*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ lcc*)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ archive_cmds_need_lc_CXX=yes
+ no_undefined_flag_CXX=' -zdefs'
+ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ hardcode_libdir_flag_spec_CXX='-R$libdir'
+ hardcode_shlibpath_var_CXX=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
+ ;;
+ esac
+ link_all_deplibs_CXX=yes
+
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+ ;;
+ *)
+ # GNU C++ compiler with Solaris linker
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+ archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+ archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ fi
+
+ hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ no_undefined_flag_CXX='${wl}-z,text'
+ archive_cmds_need_lc_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ no_undefined_flag_CXX='${wl}-z,text'
+ allow_undefined_flag_CXX='${wl}-z,nodefs'
+ archive_cmds_need_lc_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir'
+ hardcode_libdir_separator_CXX=':'
+ link_all_deplibs_CXX=yes
+ export_dynamic_flag_spec_CXX='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~
+ '"$old_archive_cmds_CXX"
+ reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~
+ '"$reload_cmds_CXX"
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ vxworks*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+ test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+ GCC_CXX="$GXX"
+ LD_CXX="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ # Dependencies to place before and after the object being linked:
+predep_objects_CXX=
+postdep_objects_CXX=
+predeps_CXX=
+postdeps_CXX=
+compiler_lib_search_path_CXX=
+
+cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+ Foo (void) { a = 0; }
+private:
+ int a;
+};
+_LT_EOF
+
+if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
+
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
+
+ for p in `eval "$output_verbose_link_cmd"`; do
+ case $p in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test $p = "-L" ||
+ test $p = "-R"; then
+ prev=$p
+ continue
+ else
+ prev=
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ case $p in
+ -L* | -R*)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$compiler_lib_search_path_CXX"; then
+ compiler_lib_search_path_CXX="${prev}${p}"
+ else
+ compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ if test -z "$postdeps_CXX"; then
+ postdeps_CXX="${prev}${p}"
+ else
+ postdeps_CXX="${postdeps_CXX} ${prev}${p}"
+ fi
+ fi
+ ;;
+
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ if test -z "$predep_objects_CXX"; then
+ predep_objects_CXX="$p"
+ else
+ predep_objects_CXX="$predep_objects_CXX $p"
+ fi
+ else
+ if test -z "$postdep_objects_CXX"; then
+ postdep_objects_CXX="$p"
+ else
+ postdep_objects_CXX="$postdep_objects_CXX $p"
+ fi
+ fi
+ ;;
+
+ *) ;; # Ignore the rest.
+
+ esac
+ done
+
+ # Clean up.
+ rm -f a.out a.exe
+else
+ echo "libtool.m4: error: problem compiling CXX test program"
+fi
+
+$RM -f confest.$objext
+
+# PORTME: override above test on systems where it is broken
+case $host_os in
+interix[3-9]*)
+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
+ # hack all around it, let's just trust "g++" to DTRT.
+ predep_objects_CXX=
+ postdep_objects_CXX=
+ postdeps_CXX=
+ ;;
+
+linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ if test "$solaris_use_stlport4" != yes; then
+ postdeps_CXX='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+solaris*)
+ case $cc_basename in
+ CC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ # Adding this requires a known-good setup of shared libraries for
+ # Sun compiler versions before 5.6, else PIC objects from an old
+ # archive will be linked into the output, leading to subtle bugs.
+ if test "$solaris_use_stlport4" != yes; then
+ postdeps_CXX='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+esac
+
+
+case " $postdeps_CXX " in
+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
+esac
+ compiler_lib_search_dirs_CXX=
+if test -n "${compiler_lib_search_path_CXX}"; then
+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ lt_prog_compiler_wl_CXX=
+lt_prog_compiler_pic_CXX=
+lt_prog_compiler_static_CXX=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+
+ # C++ specific cases for pic, static, wl, etc.
+ if test "$GXX" = yes; then
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static_CXX='-Bstatic'
+ fi
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+ ;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic_CXX='-fno-common'
+ ;;
+ *djgpp*)
+ # DJGPP does not support shared libraries at all
+ lt_prog_compiler_pic_CXX=
+ ;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ lt_prog_compiler_static_CXX=
+ ;;
+ interix[3-9]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic_CXX=-Kconform_pic
+ fi
+ ;;
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ esac
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic_CXX='-fPIC -shared'
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ esac
+ else
+ case $host_os in
+ aix[4-9]*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static_CXX='-Bstatic'
+ else
+ lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+ chorus*)
+ case $cc_basename in
+ cxch68*)
+ # Green Hills C++ Compiler
+ # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ ;;
+ esac
+ ;;
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ lt_prog_compiler_pic_CXX='-KPIC'
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ lt_prog_compiler_pic_CXX='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ freebsd* | dragonfly*)
+ # FreeBSD uses GNU C++
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $cc_basename in
+ CC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+ if test "$host_cpu" != ia64; then
+ lt_prog_compiler_pic_CXX='+Z'
+ fi
+ ;;
+ aCC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX='+Z'
+ ;;
+ esac
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ interix*)
+ # This is c89, which is MS Visual C++ (no shared libs)
+ # Anyone wants to do a port?
+ ;;
+ irix5* | irix6* | nonstopux*)
+ case $cc_basename in
+ CC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='-non_shared'
+ # CC pic flag -KPIC is the default.
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # KAI C++ Compiler
+ lt_prog_compiler_wl_CXX='--backend -Wl,'
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ ecpc* )
+ # old Intel C++ for x86_64 which still supported -KPIC.
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-static'
+ ;;
+ icpc* )
+ # Intel C++, used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-fPIC'
+ lt_prog_compiler_static_CXX='-static'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-fpic'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ ;;
+ cxx*)
+ # Compaq C++
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ lt_prog_compiler_pic_CXX=
+ lt_prog_compiler_static_CXX='-non_shared'
+ ;;
+ xlc* | xlC* | bgxl[cC]* | mpixl[cC]*)
+ # IBM XL 8.0, 9.0 on PPC and BlueGene
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-qpic'
+ lt_prog_compiler_static_CXX='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ lt_prog_compiler_wl_CXX='-Qoption ld '
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ lynxos*)
+ ;;
+ m88k*)
+ ;;
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ lt_prog_compiler_pic_CXX='-W c,exportall'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ netbsd*)
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic_CXX='-fPIC -shared'
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ lt_prog_compiler_wl_CXX='--backend -Wl,'
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ lt_prog_compiler_pic_CXX='-pic'
+ ;;
+ cxx*)
+ # Digital/Compaq C++
+ lt_prog_compiler_wl_CXX='-Wl,'
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ lt_prog_compiler_pic_CXX=
+ lt_prog_compiler_static_CXX='-non_shared'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ psos*)
+ ;;
+ solaris*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ lt_prog_compiler_wl_CXX='-Qoption ld '
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ lt_prog_compiler_pic_CXX='-PIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ lt_prog_compiler_pic_CXX='-pic'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ ;;
+ lcc*)
+ # Lucid
+ lt_prog_compiler_pic_CXX='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ case $cc_basename in
+ CC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ ;;
+ esac
+ ;;
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ lt_prog_compiler_pic_CXX='-KPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ vxworks*)
+ ;;
+ *)
+ lt_prog_compiler_can_build_shared_CXX=no
+ ;;
+ esac
+ fi
+
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic_CXX=
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_CXX" >&5
+$as_echo "$lt_prog_compiler_pic_CXX" >&6; }
+
+
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic_works_CXX=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_pic_works_CXX=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
+ case $lt_prog_compiler_pic_CXX in
+ "" | " "*) ;;
+ *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
+ esac
+else
+ lt_prog_compiler_pic_CXX=
+ lt_prog_compiler_can_build_shared_CXX=no
+fi
+
+fi
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_static_works_CXX=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_static_works_CXX=yes
+ fi
+ else
+ lt_cv_prog_compiler_static_works_CXX=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
+ :
+else
+ lt_prog_compiler_static_CXX=
+fi
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o_CXX=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o_CXX=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o_CXX=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o_CXX=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+ if test "$hard_links" = no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ case $host_os in
+ aix[4-9]*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global defined
+ # symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ ;;
+ pw32*)
+ export_symbols_cmds_CXX="$ltdll_cmds"
+ ;;
+ cygwin* | mingw* | cegcc*)
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ *)
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ esac
+ exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+with_gnu_ld_CXX=$with_gnu_ld
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_CXX" in
+x|xyes)
+ # Assume -lc should be added
+ archive_cmds_need_lc_CXX=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $archive_cmds_CXX in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl_CXX
+ pic_flag=$lt_prog_compiler_pic_CXX
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
+ allow_undefined_flag_CXX=
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+ (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ then
+ lt_cv_archive_cmds_need_lc_CXX=no
+ else
+ lt_cv_archive_cmds_need_lc_CXX=yes
+ fi
+ allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; }
+ archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix[4-9]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[01] | aix4.[01].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[45]*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$host_os in
+ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ ;;
+
+ *)
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[23].*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2.*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+haiku*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
+
+interix[3-9]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be Linux ELF.
+
+# uclinux* changes (here and below) have been submitted to the libtool
+# project, but have not yet been accepted: they are GCC-local changes
+# for the time being. (See
+# https://lists.gnu.org/archive/html/libtool-patches/2018-05/msg00000.html)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu* | uclinuxfdpiceabi)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+ lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
+fi
+
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[89] | openbsd2.[89].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_CXX=
+if test -n "$hardcode_libdir_flag_spec_CXX" ||
+ test -n "$runpath_var_CXX" ||
+ test "X$hardcode_automatic_CXX" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$hardcode_direct_CXX" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
+ test "$hardcode_minus_L_CXX" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action_CXX=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action_CXX=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action_CXX=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5
+$as_echo "$hardcode_action_CXX" >&6; }
+
+if test "$hardcode_action_CXX" = relink ||
+ test "$inherit_rpath_CXX" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+
+
+
+
+
+
+ fi # test -n "$compiler"
+
+ CC=$lt_save_CC
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+ with_gnu_ld=$lt_save_with_gnu_ld
+ lt_cv_path_LDCXX=$lt_cv_path_LD
+ lt_cv_path_LD=$lt_save_path_LD
+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Only expand once:
+
+
+
+
+
+# Identify the assembler which will work hand-in-glove with the newly
+# built GCC, so that we can examine its features. This is the assembler
+# which will be driven by the driver program.
+#
+# If build != host, and we aren't building gas in-tree, we identify a
+# build->target assembler and hope that it will have the same features
+# as the host->target assembler we'll be using.
+gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas
+
+if ${gcc_cv_as+:} false; then :
+
+else
+
+if test -x "$DEFAULT_ASSEMBLER"; then
+ gcc_cv_as="$DEFAULT_ASSEMBLER"
+elif test -f $gcc_cv_as_gas_srcdir/configure.ac \
+ && test -f ../gas/Makefile \
+ && test x$build = x$host; then
+ gcc_cv_as=../gas/as-new$build_exeext
+elif test -x as$build_exeext; then
+ # Build using assembler in the current directory.
+ gcc_cv_as=./as$build_exeext
+elif ( set dummy $AS_FOR_TARGET; test -x $2 ); then
+ gcc_cv_as="$AS_FOR_TARGET"
+else
+ # Extract the first word of "$AS_FOR_TARGET", so it can be a program name with args.
+set dummy $AS_FOR_TARGET; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_gcc_cv_as+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $gcc_cv_as in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_gcc_cv_as="$gcc_cv_as" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_gcc_cv_as="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+gcc_cv_as=$ac_cv_path_gcc_cv_as
+if test -n "$gcc_cv_as"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as" >&5
+$as_echo "$gcc_cv_as" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+fi
+
+ORIGINAL_AS_FOR_TARGET=$gcc_cv_as
+
+case "$ORIGINAL_AS_FOR_TARGET" in
+ ./as | ./as$build_exeext) ;;
+ *) ac_config_files="$ac_config_files as:exec-tool.in"
+ ;;
+esac
+
+default_ld=
+# Check whether --enable-ld was given.
+if test "${enable_ld+set}" = set; then :
+ enableval=$enable_ld; case "${enableval}" in
+ no)
+ default_ld=ld.gold
+ ;;
+ esac
+fi
+
+
+install_gold_as_default=no
+# Check whether --enable-gold was given.
+if test "${enable_gold+set}" = set; then :
+ enableval=$enable_gold; case "${enableval}" in
+ default)
+ install_gold_as_default=yes
+ ;;
+ yes)
+ if test x${default_ld} != x; then
+ install_gold_as_default=yes
+ fi
+ ;;
+ no)
+ ;;
+ *)
+ as_fn_error $? "invalid --enable-gold argument" "$LINENO" 5
+ ;;
+ esac
+fi
+
+
+# Identify the linker which will work hand-in-glove with the newly
+# built GCC, so that we can examine its features. This is the linker
+# which will be driven by the driver program.
+#
+# If build != host, and we aren't building gas in-tree, we identify a
+# build->target linker and hope that it will have the same features
+# as the host->target linker we'll be using.
+gcc_cv_gld_major_version=
+gcc_cv_gld_minor_version=
+gcc_cv_ld_gld_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/ld
+gcc_cv_ld_gold_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gold
+gcc_cv_ld_bfd_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/bfd
+
+if ${gcc_cv_ld+:} false; then :
+
+else
+
+if test -x "$DEFAULT_LINKER"; then
+ gcc_cv_ld="$DEFAULT_LINKER"
+elif test $install_gold_as_default = yes \
+ && test -f $gcc_cv_ld_gold_srcdir/configure.ac \
+ && test -f ../gold/Makefile \
+ && test x$build = x$host; then
+ gcc_cv_ld=../gold/ld-new$build_exeext
+elif test -f $gcc_cv_ld_gld_srcdir/configure.ac \
+ && test -f ../ld/Makefile \
+ && test x$build = x$host; then
+ gcc_cv_ld=../ld/ld-new$build_exeext
+elif test -x collect-ld$build_exeext; then
+ # Build using linker in the current directory.
+ gcc_cv_ld=./collect-ld$build_exeext
+elif ( set dummy $LD_FOR_TARGET; test -x $2 ); then
+ gcc_cv_ld="$LD_FOR_TARGET"
+else
+ # Extract the first word of "$LD_FOR_TARGET", so it can be a program name with args.
+set dummy $LD_FOR_TARGET; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_gcc_cv_ld+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $gcc_cv_ld in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_gcc_cv_ld="$gcc_cv_ld" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_gcc_cv_ld="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+gcc_cv_ld=$ac_cv_path_gcc_cv_ld
+if test -n "$gcc_cv_ld"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld" >&5
+$as_echo "$gcc_cv_ld" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+fi
+
+ORIGINAL_PLUGIN_LD_FOR_TARGET=$gcc_cv_ld
+PLUGIN_LD_SUFFIX=`basename $gcc_cv_ld | sed -e "s,$target_alias-,,"`
+# if the PLUGIN_LD is set ld-new, just have it as ld
+# as that is the installed named.
+if test x$PLUGIN_LD_SUFFIX = xld-new \
+ || test x$PLUGIN_LD_SUFFIX = xcollect-ld ; then
+ PLUGIN_LD_SUFFIX=ld
+fi
+
+# Check whether --with-plugin-ld was given.
+if test "${with_plugin_ld+set}" = set; then :
+ withval=$with_plugin_ld; if test x"$withval" != x; then
+ ORIGINAL_PLUGIN_LD_FOR_TARGET="$withval"
+ PLUGIN_LD_SUFFIX="$withval"
+ fi
+fi
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define PLUGIN_LD_SUFFIX "$PLUGIN_LD_SUFFIX"
+_ACEOF
+
+
+# Check to see if we are using gold instead of ld
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using gold" >&5
+$as_echo_n "checking whether we are using gold... " >&6; }
+ld_is_gold=no
+if test x$gcc_cv_ld != x; then
+ if $gcc_cv_ld --version 2>/dev/null | sed 1q \
+ | grep "GNU gold" > /dev/null; then
+ ld_is_gold=yes
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_is_gold" >&5
+$as_echo "$ld_is_gold" >&6; }
+
+# Check to see if we are using mold instead of ld
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using mold" >&5
+$as_echo_n "checking whether we are using mold... " >&6; }
+ld_is_mold=no
+if test x$gcc_cv_ld != x; then
+ if $gcc_cv_ld --version 2>/dev/null | sed 1q \
+ | grep "mold" > /dev/null; then
+ ld_is_mold=yes
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_is_mold" >&5
+$as_echo "$ld_is_mold" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking gold linker with split stack support as non default" >&5
+$as_echo_n "checking gold linker with split stack support as non default... " >&6; }
+# Check to see if default ld is not gold, but gold is
+# available and has support for split stack. If gcc was configured
+# with gold then no checking is done.
+#
+if test x$ld_is_gold = xno && which ${gcc_cv_ld}.gold >/dev/null 2>&1; then
+
+# For platforms other than powerpc64*, enable as appropriate.
+
+ gold_non_default=no
+ ld_gold=`which ${gcc_cv_ld}.gold`
+# Make sure this gold has minimal split stack support
+ if $ld_gold --help 2>/dev/null | grep split-stack-adjust-size >/dev/null 2>&1; then
+ ld_vers=`$ld_gold --version | sed 1q`
+ gold_vers=`echo $ld_vers | sed -n \
+ -e 's,^[^)]*[ ]\([0-9][0-9]*\.[0-9][0-9]*[^)]*\)) .*$,\1,p'`
+ case $target in
+# check that the gold version contains the complete split stack support
+# on powerpc64 big and little endian
+ powerpc64*-*-*)
+ case "$gold_vers" in
+ 2.25.[1-9]*|2.2[6-9][.0-9]*|2.[3-9][.0-9]*|[3-9].[.0-9]*) gold_non_default=yes
+ ;;
+ *) gold_non_default=no
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ if test $gold_non_default = yes; then
+
+$as_echo "#define HAVE_GOLD_NON_DEFAULT_SPLIT_STACK 1" >>confdefs.h
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gold_non_default" >&5
+$as_echo "$gold_non_default" >&6; }
+
+ORIGINAL_LD_FOR_TARGET=$gcc_cv_ld
+
+case "$ORIGINAL_LD_FOR_TARGET" in
+ ./collect-ld | ./collect-ld$build_exeext) ;;
+ *) ac_config_files="$ac_config_files collect-ld:exec-tool.in"
+ ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking what linker to use" >&5
+$as_echo_n "checking what linker to use... " >&6; }
+if test "$gcc_cv_ld" = ../ld/ld-new$build_exeext \
+ || test "$gcc_cv_ld" = ../gold/ld-new$build_exeext; then
+ # Single tree build which includes ld. We want to prefer it
+ # over whatever linker top-level may have detected, since
+ # we'll use what we're building after installation anyway.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: newly built ld" >&5
+$as_echo "newly built ld" >&6; }
+ in_tree_ld=yes
+ in_tree_ld_is_elf=no
+ if (grep 'EMUL = .*elf' ../ld/Makefile \
+ || grep 'EMUL = .*linux' ../ld/Makefile \
+ || grep 'EMUL = .*lynx' ../ld/Makefile) > /dev/null; then
+ in_tree_ld_is_elf=yes
+ elif test "$ld_is_gold" = yes; then
+ in_tree_ld_is_elf=yes
+ fi
+ for f in $gcc_cv_ld_bfd_srcdir/configure $gcc_cv_ld_gld_srcdir/configure $gcc_cv_ld_gld_srcdir/configure.ac $gcc_cv_ld_gld_srcdir/Makefile.in
+ do
+ gcc_cv_gld_version=`sed -n -e 's/^[ ]*VERSION=[^0-9A-Za-z_]*\([0-9]*\.[0-9]*.*\)/VERSION=\1/p' < $f`
+ if test x$gcc_cv_gld_version != x; then
+ break
+ fi
+ done
+ case $gcc_cv_gld_version in
+ VERSION=[0-9]*) ;;
+ *) as_fn_error $? "cannot find version of in-tree linker" "$LINENO" 5 ;;
+ esac
+ gcc_cv_gld_major_version=`expr "$gcc_cv_gld_version" : "VERSION=\([0-9]*\)"`
+ gcc_cv_gld_minor_version=`expr "$gcc_cv_gld_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
+ ORIGINAL_LD_BFD_FOR_TARGET=../ld/ld-new$build_exeext
+ ORIGINAL_LD_GOLD_FOR_TARGET=../gold/ld-new$build_exeext
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld" >&5
+$as_echo "$gcc_cv_ld" >&6; }
+ in_tree_ld=no
+ gcc_cvs_ld_program=`dirname $gcc_cv_ld`/`basename $gcc_cv_ld $host_exeext`
+ ORIGINAL_LD_BFD_FOR_TARGET=${gcc_cvs_ld_program}.bfd$host_exeext
+ ORIGINAL_LD_GOLD_FOR_TARGET=${gcc_cvs_ld_program}.gold$host_exeext
+fi
+
+
+
+
+# Figure out what nm we will be using.
+gcc_cv_binutils_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/binutils
+if ${gcc_cv_nm+:} false; then :
+
+else
+
+if test -f $gcc_cv_binutils_srcdir/configure.ac \
+ && test -f ../binutils/Makefile \
+ && test x$build = x$host; then
+ gcc_cv_nm=../binutils/nm-new$build_exeext
+elif test -x nm$build_exeext; then
+ gcc_cv_nm=./nm$build_exeext
+elif ( set dummy $NM_FOR_TARGET; test -x $2 ); then
+ gcc_cv_nm="$NM_FOR_TARGET"
+else
+ # Extract the first word of "$NM_FOR_TARGET", so it can be a program name with args.
+set dummy $NM_FOR_TARGET; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_gcc_cv_nm+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $gcc_cv_nm in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_gcc_cv_nm="$gcc_cv_nm" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_gcc_cv_nm="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+gcc_cv_nm=$ac_cv_path_gcc_cv_nm
+if test -n "$gcc_cv_nm"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_nm" >&5
+$as_echo "$gcc_cv_nm" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking what nm to use" >&5
+$as_echo_n "checking what nm to use... " >&6; }
+if test "$gcc_cv_nm" = ../binutils/nm-new$build_exeext; then
+ # Single tree build which includes binutils.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: newly built nm" >&5
+$as_echo "newly built nm" >&6; }
+ in_tree_nm=yes
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_nm" >&5
+$as_echo "$gcc_cv_nm" >&6; }
+ in_tree_nm=no
+fi
+
+ORIGINAL_NM_FOR_TARGET=$gcc_cv_nm
+
+case "$ORIGINAL_NM_FOR_TARGET" in
+ ./nm | ./nm$build_exeext) ;;
+ *) ac_config_files="$ac_config_files nm:exec-tool.in"
+ ;;
+esac
+
+
+# Figure out what objdump we will be using.
+if ${gcc_cv_objdump+:} false; then :
+
+else
+
+if test -f $gcc_cv_binutils_srcdir/configure.ac \
+ && test -f ../binutils/Makefile \
+ && test x$build = x$host; then
+ # Single tree build which includes binutils.
+ gcc_cv_objdump=../binutils/objdump$build_exeext
+elif test -x objdump$build_exeext; then
+ gcc_cv_objdump=./objdump$build_exeext
+elif ( set dummy $OBJDUMP_FOR_TARGET; test -x $2 ); then
+ gcc_cv_objdump="$OBJDUMP_FOR_TARGET"
+else
+ # Extract the first word of "$OBJDUMP_FOR_TARGET", so it can be a program name with args.
+set dummy $OBJDUMP_FOR_TARGET; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_gcc_cv_objdump+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $gcc_cv_objdump in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_gcc_cv_objdump="$gcc_cv_objdump" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_gcc_cv_objdump="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+gcc_cv_objdump=$ac_cv_path_gcc_cv_objdump
+if test -n "$gcc_cv_objdump"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_objdump" >&5
+$as_echo "$gcc_cv_objdump" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking what objdump to use" >&5
+$as_echo_n "checking what objdump to use... " >&6; }
+if test "$gcc_cv_objdump" = ../binutils/objdump$build_exeext; then
+ # Single tree build which includes binutils.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: newly built objdump" >&5
+$as_echo "newly built objdump" >&6; }
+elif test x$gcc_cv_objdump = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+$as_echo "not found" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_objdump" >&5
+$as_echo "$gcc_cv_objdump" >&6; }
+fi
+
+# Figure out what readelf we will be using.
+if ${gcc_cv_readelf+:} false; then :
+
+else
+
+if test -f $gcc_cv_binutils_srcdir/configure.ac \
+ && test -f ../binutils/Makefile \
+ && test x$build = x$host; then
+ # Single tree build which includes binutils.
+ gcc_cv_readelf=../binutils/readelf$build_exeext
+elif test -x readelf$build_exeext; then
+ gcc_cv_readelf=./readelf$build_exeext
+elif ( set dummy $READELF_FOR_TARGET; test -x $2 ); then
+ gcc_cv_readelf="$READELF_FOR_TARGET"
+else
+ # Extract the first word of "$READELF_FOR_TARGET", so it can be a program name with args.
+set dummy $READELF_FOR_TARGET; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_gcc_cv_readelf+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $gcc_cv_readelf in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_gcc_cv_readelf="$gcc_cv_readelf" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_gcc_cv_readelf="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+gcc_cv_readelf=$ac_cv_path_gcc_cv_readelf
+if test -n "$gcc_cv_readelf"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_readelf" >&5
+$as_echo "$gcc_cv_readelf" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking what readelf to use" >&5
+$as_echo_n "checking what readelf to use... " >&6; }
+if test "$gcc_cv_readelf" = ../binutils/readelf$build_exeext; then
+ # Single tree build which includes binutils.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: newly built readelf" >&5
+$as_echo "newly built readelf" >&6; }
+elif test x$gcc_cv_readelf = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+$as_echo "not found" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_readelf" >&5
+$as_echo "$gcc_cv_readelf" >&6; }
+fi
+
+# Figure out what otool we will be using.
+if ${gcc_cv_otool+:} false; then :
+
+else
+
+if test -x otool$build_exeext; then
+ gcc_cv_otool=./otool$build_exeext
+elif ( set dummy $OTOOL_FOR_TARGET; test -x $2 ); then
+ gcc_cv_otool="$OTOOL_FOR_TARGET"
+else
+ # Extract the first word of "$OTOOL_FOR_TARGET", so it can be a program name with args.
+set dummy $OTOOL_FOR_TARGET; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_gcc_cv_otool+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $gcc_cv_otool in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_gcc_cv_otool="$gcc_cv_otool" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_gcc_cv_otool="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+gcc_cv_otool=$ac_cv_path_gcc_cv_otool
+if test -n "$gcc_cv_otool"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_otool" >&5
+$as_echo "$gcc_cv_otool" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking what otool to use" >&5
+$as_echo_n "checking what otool to use... " >&6; }
+if test x$gcc_cv_otool = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+$as_echo "not found" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_otool" >&5
+$as_echo "$gcc_cv_otool" >&6; }
+fi
+
+# Figure out the dsymutil we will use.
+if ${gcc_cv_dsymutil+:} false; then :
+
+else
+
+if test -x "$DEFAULT_DSYMUTIL"; then
+ gcc_cv_dsymutil="$DEFAULT_DSYMUTIL"
+elif test -x dsymutil$build_exeext; then
+ gcc_cv_dsymutil=./dsymutil$build_exeext
+elif ( set dummy $DSYMUTIL_FOR_TARGET; test -x $2 ); then
+ gcc_cv_dsymutil=$DSYMUTIL_FOR_TARGET
+elif ( set dummy $DSYMUTIL; test -x $2 ); then
+ gcc_cv_dsymutil=$DSYMUTIL
+else
+ # Extract the first word of "$DSYMUTIL_FOR_TARGET", so it can be a program name with args.
+set dummy $DSYMUTIL_FOR_TARGET; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_gcc_cv_dsymutil+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $gcc_cv_dsymutil in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_gcc_cv_dsymutil="$gcc_cv_dsymutil" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_gcc_cv_dsymutil="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+gcc_cv_dsymutil=$ac_cv_path_gcc_cv_dsymutil
+if test -n "$gcc_cv_dsymutil"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_dsymutil" >&5
+$as_echo "$gcc_cv_dsymutil" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+fi
+
+ORIGINAL_DSYMUTIL_FOR_TARGET=$gcc_cv_dsymutil
+
+case "$ORIGINAL_DSYMUTIL_FOR_TARGET" in
+ ./dsymutil | ./dsymutil$build_exeext) ;;
+ *) ac_config_files="$ac_config_files dsymutil:exec-tool.in"
+ ;;
+esac
+
+# Figure out what assembler alignment features are present.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler flags" >&5
+$as_echo_n "checking assembler flags... " >&6; }
+if ${gcc_cv_as_flags+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case "$target" in
+ i[34567]86-*-linux*)
+ gcc_cv_as_flags=--32
+ ;;
+ x86_64-*-linux-gnux32)
+ gcc_cv_as_flags=--x32
+ ;;
+ x86_64-*-linux*)
+ gcc_cv_as_flags=--64
+ ;;
+ powerpc*-*-darwin*)
+ gcc_cv_as_flags="-arch ppc"
+ ;;
+ *)
+ gcc_cv_as_flags=" "
+ ;;
+ esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_flags" >&5
+$as_echo "$gcc_cv_as_flags" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .balign and .p2align" >&5
+$as_echo_n "checking assembler for .balign and .p2align... " >&6; }
+if ${gcc_cv_as_balign_and_p2align+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_balign_and_p2align=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.balign 4
+.p2align 2' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_balign_and_p2align=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_balign_and_p2align" >&5
+$as_echo "$gcc_cv_as_balign_and_p2align" >&6; }
+if test $gcc_cv_as_balign_and_p2align = yes; then
+
+$as_echo "#define HAVE_GAS_BALIGN_AND_P2ALIGN 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .p2align with maximum skip" >&5
+$as_echo_n "checking assembler for .p2align with maximum skip... " >&6; }
+if ${gcc_cv_as_max_skip_p2align+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_max_skip_p2align=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.p2align 4,,7' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_max_skip_p2align=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_max_skip_p2align" >&5
+$as_echo "$gcc_cv_as_max_skip_p2align" >&6; }
+if test $gcc_cv_as_max_skip_p2align = yes; then
+
+$as_echo "#define HAVE_GAS_MAX_SKIP_P2ALIGN 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .literal16" >&5
+$as_echo_n "checking assembler for .literal16... " >&6; }
+if ${gcc_cv_as_literal16+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_literal16=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.literal16' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_literal16=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_literal16" >&5
+$as_echo "$gcc_cv_as_literal16" >&6; }
+if test $gcc_cv_as_literal16 = yes; then
+
+$as_echo "#define HAVE_GAS_LITERAL16 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for working .subsection -1" >&5
+$as_echo_n "checking assembler for working .subsection -1... " >&6; }
+if ${gcc_cv_as_subsection_m1+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_subsection_m1=no
+ if test x$gcc_cv_as != x; then
+ $as_echo 'conftest_label1: .word 0
+.subsection -1
+conftest_label2: .word 0
+.previous' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ if test x$gcc_cv_nm != x; then
+ $gcc_cv_nm conftest.o | grep conftest_label1 > conftest.nm1
+ $gcc_cv_nm conftest.o | grep conftest_label2 | sed -e 's/label2/label1/' > conftest.nm2
+ if cmp conftest.nm1 conftest.nm2 > /dev/null 2>&1
+ then :
+ else gcc_cv_as_subsection_m1=yes
+ fi
+ rm -f conftest.nm1 conftest.nm2
+ fi
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_subsection_m1" >&5
+$as_echo "$gcc_cv_as_subsection_m1" >&6; }
+if test $gcc_cv_as_subsection_m1 = yes; then
+
+$as_echo "#define HAVE_GAS_SUBSECTION_ORDERING 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .weak" >&5
+$as_echo_n "checking assembler for .weak... " >&6; }
+if ${gcc_cv_as_weak+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_weak=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .weak foobar' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_weak=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_weak" >&5
+$as_echo "$gcc_cv_as_weak" >&6; }
+if test $gcc_cv_as_weak = yes; then
+
+$as_echo "#define HAVE_GAS_WEAK 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .weakref" >&5
+$as_echo_n "checking assembler for .weakref... " >&6; }
+if ${gcc_cv_as_weakref+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_weakref=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .weakref foobar, barfnot' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_weakref=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_weakref" >&5
+$as_echo "$gcc_cv_as_weakref" >&6; }
+if test $gcc_cv_as_weakref = yes; then
+
+$as_echo "#define HAVE_GAS_WEAKREF 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .nsubspa comdat" >&5
+$as_echo_n "checking assembler for .nsubspa comdat... " >&6; }
+if ${gcc_cv_as_nsubspa_comdat+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_nsubspa_comdat=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .SPACE $TEXT$
+ .NSUBSPA $CODE$,COMDAT' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_nsubspa_comdat=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_nsubspa_comdat" >&5
+$as_echo "$gcc_cv_as_nsubspa_comdat" >&6; }
+if test $gcc_cv_as_nsubspa_comdat = yes; then
+
+$as_echo "#define HAVE_GAS_NSUBSPA_COMDAT 1" >>confdefs.h
+
+fi
+
+
+# .hidden needs to be supported in both the assembler and the linker,
+# because GNU LD versions before 2.12.1 have buggy support for STV_HIDDEN.
+# This is irritatingly difficult to feature test for; we have to check the
+# date string after the version number. If we've got an in-tree
+# ld, we don't know its patchlevel version, so we set the baseline at 2.13
+# to be safe.
+# The gcc_GAS_CHECK_FEATURE call just sets a cache variable.
+case "${target}" in
+ *-*-aix*)
+ conftest_s=' .globl foobar,hidden'
+ ;;
+ *)
+ conftest_s=' .hidden foobar
+foobar:'
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .hidden" >&5
+$as_echo_n "checking assembler for .hidden... " >&6; }
+if ${gcc_cv_as_hidden+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_hidden=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_hidden=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_hidden" >&5
+$as_echo "$gcc_cv_as_hidden" >&6; }
+
+
+case "${target}" in
+ *-*-darwin*)
+ # Darwin as has some visibility support, though with a different syntax.
+ gcc_cv_as_hidden=yes
+ ;;
+esac
+
+# gnu_indirect_function type is an extension proposed at
+# http://groups.google/com/group/generic-abi/files. It allows dynamic runtime
+# selection of function implementation
+# Check whether --enable-gnu-indirect-function was given.
+if test "${enable_gnu_indirect_function+set}" = set; then :
+ enableval=$enable_gnu_indirect_function; case $enable_gnu_indirect_function in
+ yes | no) ;;
+ *) as_fn_error $? "'$enable_gnu_indirect_function' is an invalid value for --enable-gnu-indirect-function.
+Valid choices are 'yes' and 'no'." "$LINENO" 5 ;;
+ esac
+else
+ enable_gnu_indirect_function="$default_gnu_indirect_function"
+fi
+
+
+case "${target}" in
+ riscv*-*-linux*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking linker ifunc IRELATIVE support" >&5
+$as_echo_n "checking linker ifunc IRELATIVE support... " >&6; }
+ cat > conftest.s <<EOF
+ .text
+ .type foo_resolver, @function
+foo_resolver:
+ ret
+ .size foo_resolver, .-foo_resolver
+
+ .globl foo
+ .type foo, %gnu_indirect_function
+ .set foo, foo_resolver
+
+ .globl bar
+ .type bar, @function
+bar:
+ call foo
+ ret
+ .size bar, .-bar
+EOF
+ if test x$gcc_cv_as != x \
+ && test x$gcc_cv_ld != x \
+ && test x$gcc_cv_readelf != x \
+ && $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1 \
+ && $gcc_cv_ld -o conftest conftest.o > /dev/null 2>&1 \
+ && $gcc_cv_readelf --relocs --wide conftest \
+ | grep R_RISCV_IRELATIVE > /dev/null 2>&1; then
+ enable_gnu_indirect_function=yes
+ fi
+ rm -f conftest conftest.o conftest.s
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_gnu_indirect_function" >&5
+$as_echo "$enable_gnu_indirect_function" >&6; }
+ ;;
+esac
+
+gif=`if test x$enable_gnu_indirect_function = xyes; then echo 1; else echo 0; fi`
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_GNU_INDIRECT_FUNCTION $gif
+_ACEOF
+
+
+
+if test $in_tree_ld != yes ; then
+ ld_ver=`$gcc_cv_ld --version 2>/dev/null | sed 1q`
+ if echo "$ld_ver" | grep GNU > /dev/null; then
+ if test x"$ld_is_gold" = xyes; then
+ # GNU gold --version looks like this:
+ #
+ # GNU gold (GNU Binutils 2.21.51.20110225) 1.11
+ #
+ # We extract the binutils version which is more familiar and specific
+ # than the gold version.
+ ld_vers=`echo $ld_ver | sed -n \
+ -e 's,^[^)]*[ ]\([0-9][0-9]*\.[0-9][0-9]*[^)]*\)) .*$,\1,p'`
+ else
+ # GNU ld --version looks like this:
+ #
+ # GNU ld (GNU Binutils) 2.21.51.20110225
+ ld_vers=`echo $ld_ver | sed -n \
+ -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*.*\)$,\1,p'`
+ fi
+ ld_date=`echo $ld_ver | sed -n 's,^.*\([2-9][0-9][0-9][0-9]\)\(-*\)\([01][0-9]\)\2\([0-3][0-9]\).*$,\1\3\4,p'`
+ ld_vers_major=`expr "$ld_vers" : '\([0-9]*\)'`
+ ld_vers_minor=`expr "$ld_vers" : '[0-9]*\.\([0-9]*\)'`
+ ld_vers_patch=`expr "$ld_vers" : '[0-9]*\.[0-9]*\.\([0-9]*\)'`
+ else
+ case "${target}" in
+ *-*-solaris2*)
+ # Solaris 2 ld -V output looks like this for a regular version:
+ #
+ # ld: Software Generation Utilities - Solaris Link Editors: 5.11-1.1699
+ #
+ # but test versions add stuff at the end:
+ #
+ # ld: Software Generation Utilities - Solaris Link Editors: 5.11-1.1701:onnv-ab196087-6931056-03/25/10
+ #
+ # ld and ld.so.1 are guaranteed to be updated in lockstep, so ld version
+ # numbers can be used in ld.so.1 feature checks even if a different
+ # linker is configured.
+ ld_ver=`$gcc_cv_ld -V 2>&1`
+ if echo "$ld_ver" | grep 'Solaris Link Editors' > /dev/null; then
+ ld_vers=`echo $ld_ver | sed -n \
+ -e 's,^.*: 5\.[0-9][0-9]*-\([0-9]\.[0-9][0-9]*\).*$,\1,p'`
+ ld_vers_major=`expr "$ld_vers" : '\([0-9]*\)'`
+ ld_vers_minor=`expr "$ld_vers" : '[0-9]*\.\([0-9]*\)'`
+ fi
+ ;;
+ esac
+ fi
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker for .hidden support" >&5
+$as_echo_n "checking linker for .hidden support... " >&6; }
+if ${gcc_cv_ld_hidden+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test $in_tree_ld = yes ; then
+ gcc_cv_ld_hidden=no
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 13 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_hidden=yes
+ fi
+else
+ gcc_cv_ld_hidden=yes
+ if test x"$ld_is_gold" = xyes; then
+ :
+ elif test x"$ld_is_mold" = xyes; then
+ :
+ elif echo "$ld_ver" | grep GNU > /dev/null; then
+ if test 0"$ld_date" -lt 20020404; then
+ if test -n "$ld_date"; then
+ # If there was date string, but was earlier than 2002-04-04, fail
+ gcc_cv_ld_hidden=no
+ elif test -z "$ld_vers"; then
+ # If there was no date string nor ld version number, something is wrong
+ gcc_cv_ld_hidden=no
+ else
+ test -z "$ld_vers_patch" && ld_vers_patch=0
+ if test "$ld_vers_major" -lt 2; then
+ gcc_cv_ld_hidden=no
+ elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 12; then
+ gcc_cv_ld_hidden="no"
+ elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -eq 12 -a "$ld_vers_patch" -eq 0; then
+ gcc_cv_ld_hidden=no
+ fi
+ fi
+ fi
+ else
+ case "${target}" in
+ *-*-aix[789]*)
+ gcc_cv_ld_hidden=yes
+ ;;
+ *-*-darwin*)
+ # Darwin ld has some visibility support.
+ gcc_cv_ld_hidden=yes
+ ;;
+ hppa64*-*-hpux* | ia64*-*-hpux*)
+ gcc_cv_ld_hidden=yes
+ ;;
+ *-*-solaris2*)
+ # Support for .hidden in Sun ld appeared in Solaris 9 FCS, but
+ # .symbolic was only added in Solaris 9 12/02.
+ gcc_cv_ld_hidden=yes
+ ;;
+ *)
+ gcc_cv_ld_hidden=no
+ ;;
+ esac
+ fi
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_hidden" >&5
+$as_echo "$gcc_cv_ld_hidden" >&6; }
+libgcc_visibility=no
+
+
+if test $gcc_cv_as_hidden = yes && test $gcc_cv_ld_hidden = yes; then
+ libgcc_visibility=yes
+
+$as_echo "#define HAVE_GAS_HIDDEN 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker read-only and read-write section mixing" >&5
+$as_echo_n "checking linker read-only and read-write section mixing... " >&6; }
+gcc_cv_ld_ro_rw_mix=unknown
+if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 10 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_ro_rw_mix=read-write
+ fi
+elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x -a x$gcc_cv_objdump != x ; then
+ echo '.section myfoosect, "a"' > conftest1.s
+ echo '.section myfoosect, "aw"' > conftest2.s
+ echo '.byte 1' >> conftest2.s
+ echo '.section myfoosect, "a"' > conftest3.s
+ echo '.byte 0' >> conftest3.s
+ if $gcc_cv_as -o conftest1.o conftest1.s > /dev/null 2>&1 \
+ && $gcc_cv_as -o conftest2.o conftest2.s > /dev/null 2>&1 \
+ && $gcc_cv_as -o conftest3.o conftest3.s > /dev/null 2>&1 \
+ && $gcc_cv_ld -shared -o conftest1.so conftest1.o \
+ conftest2.o conftest3.o > /dev/null 2>&1; then
+ gcc_cv_ld_ro_rw_mix=`$gcc_cv_objdump -h conftest1.so \
+ | sed -e '/myfoosect/!d' -e N`
+ if echo "$gcc_cv_ld_ro_rw_mix" | grep CONTENTS > /dev/null; then
+ if echo "$gcc_cv_ld_ro_rw_mix" | grep READONLY > /dev/null; then
+ gcc_cv_ld_ro_rw_mix=read-only
+ else
+ gcc_cv_ld_ro_rw_mix=read-write
+ fi
+ fi
+ fi
+ rm -f conftest.* conftest[123].*
+fi
+if test x$gcc_cv_ld_ro_rw_mix = xread-write; then
+
+$as_echo "#define HAVE_LD_RO_RW_SECTION_MIXING 1" >>confdefs.h
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_ro_rw_mix" >&5
+$as_echo "$gcc_cv_ld_ro_rw_mix" >&6; }
+
+# Check whether --enable-initfini-array was given.
+if test "${enable_initfini_array+set}" = set; then :
+ enableval=$enable_initfini_array;
+else
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for .preinit_array/.init_array/.fini_array support" >&5
+$as_echo_n "checking for .preinit_array/.init_array/.fini_array support... " >&6; }
+if ${gcc_cv_initfini_array+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x${build}" = "x${target}" && test "x${build}" = "x${host}"; then
+ case "${target}" in
+ ia64-*)
+ if test "$cross_compiling" = yes; then :
+ gcc_cv_initfini_array=no
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#ifndef __ELF__
+#error Not an ELF OS
+#endif
+/* We turn on .preinit_array/.init_array/.fini_array support for ia64
+ if it can be used. */
+static int x = -1;
+int main (void) { return x; }
+int foo (void) { x = 0; }
+int (*fp) (void) __attribute__ ((section (".init_array"))) = foo;
+
+_ACEOF
+if ac_fn_cxx_try_run "$LINENO"; then :
+ gcc_cv_initfini_array=yes
+else
+ gcc_cv_initfini_array=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+;;
+ *)
+ gcc_cv_initfini_array=no
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 \
+ -a "$gcc_cv_gld_minor_version" -ge 22 \
+ -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_initfini_array=yes
+ fi
+ elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x -a x$gcc_cv_objdump != x ; then
+ case $target:$gas in
+ *:yes)
+ sh_flags='"a"'
+ sh_type='%progbits'
+ ;;
+ i?86-*-solaris2*:no | x86_64-*-solaris2*:no)
+ sh_flags='"a"'
+ sh_type='@progbits'
+ ;;
+ sparc*-*-solaris2*:no)
+ sh_flags='#alloc'
+ sh_type='#progbits'
+ sh_quote='"'
+ ;;
+ esac
+ case "$target:$gnu_ld" in
+ *:yes)
+ cat > conftest.s <<EOF
+.section .dtors,$sh_flags,$sh_type
+.balign 4
+.byte 'A', 'A', 'A', 'A'
+.section .ctors,$sh_flags,$sh_type
+.balign 4
+.byte 'B', 'B', 'B', 'B'
+.section .fini_array.65530,$sh_flags,$sh_type
+.balign 4
+.byte 'C', 'C', 'C', 'C'
+.section .init_array.65530,$sh_flags,$sh_type
+.balign 4
+.byte 'D', 'D', 'D', 'D'
+.section .dtors.64528,$sh_flags,$sh_type
+.balign 4
+.byte 'E', 'E', 'E', 'E'
+.section .ctors.64528,$sh_flags,$sh_type
+.balign 4
+.byte 'F', 'F', 'F', 'F'
+.section .fini_array.01005,$sh_flags,$sh_type
+.balign 4
+.byte 'G', 'G', 'G', 'G'
+.section .init_array.01005,$sh_flags,$sh_type
+.balign 4
+.byte 'H', 'H', 'H', 'H'
+.text
+.globl _start
+_start:
+EOF
+ if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1 \
+ && $gcc_cv_ld -o conftest conftest.o > /dev/null 2>&1 \
+ && $gcc_cv_objdump -s -j .init_array conftest \
+ | grep HHHHFFFFDDDDBBBB > /dev/null 2>&1 \
+ && $gcc_cv_objdump -s -j .fini_array conftest \
+ | grep GGGGEEEECCCCAAAA > /dev/null 2>&1; then
+ gcc_cv_initfini_array=yes
+ fi
+ ;;
+ *-*-solaris2*:no)
+ # When Solaris ld added constructor priority support, it was
+ # decided to only handle .init_array.N/.fini_array.N since
+ # there was no need for backwards compatibility with
+ # .ctors.N/.dtors.N. .ctors/.dtors remain as separate
+ # sections with correct execution order resp. to
+ # .init_array/.fini_array, while gld merges them into
+ # .init_array/.fini_array.
+ cat > conftest.s <<EOF
+.section $sh_quote.fini_array.65530$sh_quote,$sh_flags,$sh_type
+.align 4
+.byte 'C', 'C', 'C', 'C', 'C', 'C', 'C', 'C'
+.section $sh_quote.init_array.65530$sh_quote,$sh_flags,$sh_type
+.align 4
+.byte 'D', 'D', 'D', 'D', 'D', 'D', 'D', 'D'
+.section $sh_quote.fini_array.01005$sh_quote,$sh_flags,$sh_type
+.align 4
+.byte 'G', 'G', 'G', 'G', 'G', 'G', 'G', 'G'
+.section $sh_quote.init_array.01005$sh_quote,$sh_flags,$sh_type
+.align 4
+.byte 'H', 'H', 'H', 'H', 'H', 'H', 'H', 'H'
+.text
+.globl _start
+_start:
+EOF
+ if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1 \
+ && $gcc_cv_ld -o conftest conftest.o > /dev/null 2>&1 \
+ && $gcc_cv_objdump -s -j .init_array conftest \
+ | grep HHHHHHHHDDDDDDDD > /dev/null 2>&1 \
+ && $gcc_cv_objdump -s -j .fini_array conftest \
+ | grep GGGGGGGGCCCCCCCC > /dev/null 2>&1; then
+ gcc_cv_initfini_array=yes
+ fi
+ ;;
+ esac
+ rm -f conftest conftest.*
+ fi
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#ifndef __ELF__
+# error Not an ELF OS
+#endif
+#include <stdlib.h>
+#if defined __GLIBC_PREREQ
+# if __GLIBC_PREREQ (2, 4)
+# else
+# error GLIBC 2.4 required
+# endif
+#else
+# if defined __sun__ && defined __svr4__
+ /* Solaris ld.so.1 supports .init_array/.fini_array since Solaris 8. */
+# else
+# error The C library not known to support .init_array/.fini_array
+# endif
+#endif
+
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+ gcc_cv_initfini_array=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext;;
+ esac
+ else
+ case "${target}" in
+ aarch64*-linux-gnu*)
+ # AArch64 postdates glibc support for .init_array/.fini_array,
+ # so we don't need the preprocessor test above.
+ gcc_cv_initfini_array=yes
+ ;;
+
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking cross compile... guessing" >&5
+$as_echo_n "checking cross compile... guessing... " >&6; }
+ gcc_cv_initfini_array=no
+ ;;
+ esac
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_initfini_array" >&5
+$as_echo "$gcc_cv_initfini_array" >&6; }
+ enable_initfini_array=$gcc_cv_initfini_array
+
+fi
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_INITFINI_ARRAY_SUPPORT `if test $enable_initfini_array = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+
+
+# Check if we have .[us]leb128, and support symbol arithmetic with it.
+# Older versions of GAS and some non-GNU assemblers, have a bugs handling
+# these directives, even when they appear to accept them.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .sleb128 and .uleb128" >&5
+$as_echo_n "checking assembler for .sleb128 and .uleb128... " >&6; }
+if ${gcc_cv_as_leb128+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_leb128=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .data
+ .uleb128 L2 - L1
+L1:
+ .uleb128 1280
+ .sleb128 -1010
+L2:
+ .uleb128 0x8000000000000000
+' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+
+if test "x$gcc_cv_objdump" != x; then
+ if $gcc_cv_objdump -s conftest.o 2>/dev/null \
+ | grep '04800a8e 78808080 80808080 808001' >/dev/null; then
+ gcc_cv_as_leb128=yes
+ fi
+elif test "x$gcc_cv_otool" != x; then
+ if $gcc_cv_otool -d conftest.o 2>/dev/null \
+ | grep '04 80 0a 8e 78 80 80 80 80 80 80 80 80 80 01' >/dev/null; then
+ gcc_cv_as_leb128=yes
+ fi
+else
+ # play safe, assume the assembler is broken.
+ :
+fi
+
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_leb128" >&5
+$as_echo "$gcc_cv_as_leb128" >&6; }
+if test $gcc_cv_as_leb128 = yes; then
+
+$as_echo "#define HAVE_AS_LEB128 1" >>confdefs.h
+
+fi
+if test $gcc_cv_as_leb128 != yes; then
+
+$as_echo "#define HAVE_AS_LEB128 0" >>confdefs.h
+
+fi
+
+# Determine if an .eh_frame section is read-only.
+gcc_fn_eh_frame_ro () {
+ $gcc_cv_as $1 -o conftest.o conftest.s > /dev/null 2>&1 && \
+ $gcc_cv_objdump -h conftest.o 2>/dev/null | \
+ sed -e '/.eh_frame/!d' -e N | grep READONLY > /dev/null
+}
+
+# Check if we have assembler support for unwind directives.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for cfi directives" >&5
+$as_echo_n "checking assembler for cfi directives... " >&6; }
+if ${gcc_cv_as_cfi_directive+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_cfi_directive=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .text
+ .cfi_startproc
+ .cfi_offset 0, 0
+ .cfi_same_value 1
+ .cfi_def_cfa 1, 2
+ .cfi_escape 1, 2, 3, 4, 5
+ .cfi_endproc' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ case "$target" in
+ *-*-solaris*)
+ # If the linker used on Solaris (like Sun ld) isn't capable of merging
+ # read-only and read-write sections, we need to make sure that the
+ # assembler used emits read-write .eh_frame sections.
+ if test "x$gcc_cv_ld_ro_rw_mix" = xread-write; then
+ gcc_cv_as_cfi_directive=yes
+ elif test "x$gcc_cv_objdump" = x; then
+ # No objdump, err on the side of caution.
+ gcc_cv_as_cfi_directive=no
+ else
+ if test x$gas = xyes; then
+ as_32_opt="--32"
+ as_64_opt="--64"
+ else
+ as_32_opt="-m32"
+ as_64_opt="-m64"
+ fi
+ case "$target" in
+ sparc*-*-solaris2.*)
+ # On Solaris/SPARC, .eh_frame sections should always be read-write.
+ if gcc_fn_eh_frame_ro $as_32_opt \
+ || gcc_fn_eh_frame_ro $as_64_opt; then
+ gcc_cv_as_cfi_directive=no
+ else
+ gcc_cv_as_cfi_directive=yes
+ fi
+ ;;
+ i?86-*-solaris2.* | x86_64-*-solaris2.*)
+ # On Solaris/x86, make sure that GCC and assembler agree on using
+ # read-only .eh_frame sections for 64-bit.
+ if gcc_fn_eh_frame_ro $as_32_opt; then
+ gcc_cv_as_cfi_directive=no
+ elif gcc_fn_eh_frame_ro $as_64_opt; then
+ gcc_cv_as_cfi_directive=yes
+ else
+ gcc_cv_as_cfi_directive=no
+ fi
+ ;;
+ esac
+ fi
+ ;;
+ *-*-*)
+ gcc_cv_as_cfi_directive=yes
+ ;;
+esac
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_cfi_directive" >&5
+$as_echo "$gcc_cv_as_cfi_directive" >&6; }
+
+
+if test $gcc_cv_as_cfi_directive = yes && test x$gcc_cv_objdump != x; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for working cfi advance" >&5
+$as_echo_n "checking assembler for working cfi advance... " >&6; }
+if ${gcc_cv_as_cfi_advance_working+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_cfi_advance_working=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .text
+ .cfi_startproc
+ .cfi_adjust_cfa_offset 64
+ .skip 75040, 0
+ .cfi_adjust_cfa_offset 128
+ .cfi_endproc' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+
+if $gcc_cv_objdump -Wf conftest.o 2>/dev/null \
+ | grep 'DW_CFA_advance_loc[24]:[ ][ ]*75040[ ]' >/dev/null; then
+ gcc_cv_as_cfi_advance_working=yes
+fi
+
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_cfi_advance_working" >&5
+$as_echo "$gcc_cv_as_cfi_advance_working" >&6; }
+
+
+else
+ # no objdump, err on the side of caution
+ gcc_cv_as_cfi_advance_working=no
+fi
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_GAS_CFI_DIRECTIVE `if test $gcc_cv_as_cfi_directive = yes \
+ && test $gcc_cv_as_cfi_advance_working = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for cfi personality directive" >&5
+$as_echo_n "checking assembler for cfi personality directive... " >&6; }
+if ${gcc_cv_as_cfi_personality_directive+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_cfi_personality_directive=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .text
+ .cfi_startproc
+ .cfi_personality 0, symbol
+ .cfi_endproc' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_cfi_personality_directive=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_cfi_personality_directive" >&5
+$as_echo "$gcc_cv_as_cfi_personality_directive" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_GAS_CFI_PERSONALITY_DIRECTIVE `if test $gcc_cv_as_cfi_personality_directive = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for cfi sections directive" >&5
+$as_echo_n "checking assembler for cfi sections directive... " >&6; }
+if ${gcc_cv_as_cfi_sections_directive+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_cfi_sections_directive=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .text
+ .cfi_sections .debug_frame, .eh_frame
+ .cfi_startproc
+ .cfi_endproc' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ case $target_os in
+ win32 | pe | cygwin* | mingw32*)
+ # Need to check that we generated the correct relocation for the
+ # .debug_frame section. This was fixed for binutils 2.21.
+ gcc_cv_as_cfi_sections_directive=no
+ if test "x$gcc_cv_objdump" != x; then
+ if $gcc_cv_objdump -j .debug_frame -r conftest.o 2>/dev/null | \
+ grep secrel > /dev/null; then
+ gcc_cv_as_cfi_sections_directive=yes
+ fi
+ fi
+ ;;
+ *)
+ gcc_cv_as_cfi_sections_directive=yes
+ ;;
+esac
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_cfi_sections_directive" >&5
+$as_echo "$gcc_cv_as_cfi_sections_directive" >&6; }
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_GAS_CFI_SECTIONS_DIRECTIVE `if test $gcc_cv_as_cfi_sections_directive = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+
+# GAS versions up to and including 2.11.0 may mis-optimize
+# .eh_frame data.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for eh_frame optimization" >&5
+$as_echo_n "checking assembler for eh_frame optimization... " >&6; }
+if ${gcc_cv_as_eh_frame+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_eh_frame=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .text
+.LFB1:
+ .4byte 0
+.L1:
+ .4byte 0
+.LFE1:
+ .section .eh_frame,"aw",@progbits
+__FRAME_BEGIN__:
+ .4byte .LECIE1-.LSCIE1
+.LSCIE1:
+ .4byte 0x0
+ .byte 0x1
+ .ascii "z\0"
+ .byte 0x1
+ .byte 0x78
+ .byte 0x1a
+ .byte 0x0
+ .byte 0x4
+ .4byte 1
+ .p2align 1
+.LECIE1:
+.LSFDE1:
+ .4byte .LEFDE1-.LASFDE1
+.LASFDE1:
+ .4byte .LASFDE1-__FRAME_BEGIN__
+ .4byte .LFB1
+ .4byte .LFE1-.LFB1
+ .byte 0x4
+ .4byte .LFE1-.LFB1
+ .byte 0x4
+ .4byte .L1-.LFB1
+.LEFDE1:' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ cat > conftest.lit <<EOF
+ 0000 10000000 00000000 017a0001 781a0004 .........z..x...
+ 0010 01000000 12000000 18000000 00000000 ................
+ 0020 08000000 04080000 0044 .........D
+EOF
+cat > conftest.big <<EOF
+ 0000 00000010 00000000 017a0001 781a0004 .........z..x...
+ 0010 00000001 00000012 00000018 00000000 ................
+ 0020 00000008 04000000 0844 .........D
+EOF
+ # If the assembler didn't choke, and we can objdump,
+ # and we got the correct data, then succeed.
+ # The text in the here-document typically retains its unix-style line
+ # endings, while the output of objdump will use host line endings.
+ # Therefore, use diff -b for the comparisons.
+ if test x$gcc_cv_objdump != x \
+ && $gcc_cv_objdump -s -j .eh_frame conftest.o 2>/dev/null \
+ | tail -3 > conftest.got \
+ && { diff -b conftest.lit conftest.got > /dev/null 2>&1 \
+ || diff -b conftest.big conftest.got > /dev/null 2>&1; }
+ then
+ gcc_cv_as_eh_frame=yes
+ elif { ac_try='$gcc_cv_as -o conftest.o --traditional-format /dev/null'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ gcc_cv_as_eh_frame=buggy
+ else
+ # Uh oh, what do we do now?
+ gcc_cv_as_eh_frame=no
+ fi
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_eh_frame" >&5
+$as_echo "$gcc_cv_as_eh_frame" >&6; }
+
+
+
+if test $gcc_cv_as_eh_frame = buggy; then
+
+$as_echo "#define USE_AS_TRADITIONAL_FORMAT 1" >>confdefs.h
+
+fi
+
+# Test if the assembler supports the section flag 'e' or #exclude for
+# specifying an excluded section.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for section exclude flag" >&5
+$as_echo_n "checking assembler for section exclude flag... " >&6; }
+if ${gcc_cv_as_section_exclude_e+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_section_exclude_e=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.section foo1,"e"
+ .byte 0,0,0,0' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags --fatal-warnings -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_section_exclude_e=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_section_exclude_e" >&5
+$as_echo "$gcc_cv_as_section_exclude_e" >&6; }
+
+
+if test $gcc_cv_as_section_exclude_e = no; then
+ case "${target}" in
+ # Solaris as uses #exclude instead.
+ *-*-solaris2*)
+ case "${target}" in
+ sparc*-*-solaris2*)
+ conftest_s='.section "foo1", #exclude'
+ ;;
+ i?86-*-solaris2* | x86_64-*-solaris2*)
+ conftest_s='.section foo1, #exclude'
+ ;;
+ esac
+ ;;
+ esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for section exclude flag" >&5
+$as_echo_n "checking assembler for section exclude flag... " >&6; }
+if ${gcc_cv_as_section_exclude_hash+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_section_exclude_hash=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$conftest_s
+ .byte 0,0,0,0" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_section_exclude_hash=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_section_exclude_hash" >&5
+$as_echo "$gcc_cv_as_section_exclude_hash" >&6; }
+
+
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_GAS_SECTION_EXCLUDE `if test $gcc_cv_as_section_exclude_e = yes || test $gcc_cv_as_section_exclude_hash = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+
+# Test if the assembler supports the section flag 'R' for specifying
+# section with SHF_GNU_RETAIN.
+case "${target}" in
+ # Solaris may use GNU assembler with Solairs ld. Even if GNU
+ # assembler supports the section flag 'R', it doesn't mean that
+ # Solairs ld supports it.
+ *-*-solaris2*)
+ gcc_cv_as_shf_gnu_retain=no
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for section 'R' flag" >&5
+$as_echo_n "checking assembler for section 'R' flag... " >&6; }
+if ${gcc_cv_as_shf_gnu_retain+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_shf_gnu_retain=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.section .foo,"awR",%progbits
+.byte 0' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags --fatal-warnings -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_shf_gnu_retain=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_shf_gnu_retain" >&5
+$as_echo "$gcc_cv_as_shf_gnu_retain" >&6; }
+
+
+ ;;
+esac
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_GAS_SHF_GNU_RETAIN `if test $gcc_cv_as_shf_gnu_retain = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+
+# Test if the assembler supports the section flag 'o' for specifying
+# section with link-order.
+case "${target}" in
+ # Solaris may use GNU assembler with Solairs ld. Even if GNU
+ # assembler supports the section flag 'o', it doesn't mean that
+ # Solairs ld supports it.
+ *-*-solaris2*)
+ gcc_cv_as_section_link_order=no
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for section 'o' flag" >&5
+$as_echo_n "checking assembler for section 'o' flag... " >&6; }
+if ${gcc_cv_as_section_link_order+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_section_link_order=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.section .foo,"a"
+.byte 0
+.section __patchable_function_entries,"awo",%progbits,.foo
+.byte 0' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags --fatal-warnings -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_section_link_order=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_section_link_order" >&5
+$as_echo "$gcc_cv_as_section_link_order" >&6; }
+
+
+ ;;
+esac
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_GAS_SECTION_LINK_ORDER `if test $gcc_cv_as_section_link_order = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for section merging support" >&5
+$as_echo_n "checking assembler for section merging support... " >&6; }
+if ${gcc_cv_as_shf_merge+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_shf_merge=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.section .rodata.str, "aMS", @progbits, 1' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags --fatal-warnings -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_shf_merge=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_shf_merge" >&5
+$as_echo "$gcc_cv_as_shf_merge" >&6; }
+
+
+if test $gcc_cv_as_shf_merge = no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for section merging support" >&5
+$as_echo_n "checking assembler for section merging support... " >&6; }
+if ${gcc_cv_as_shf_merge+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_shf_merge=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.section .rodata.str, "aMS", %progbits, 1' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags --fatal-warnings -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_shf_merge=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_shf_merge" >&5
+$as_echo "$gcc_cv_as_shf_merge" >&6; }
+
+
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_GAS_SHF_MERGE `if test $gcc_cv_as_shf_merge = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+
+gcc_cv_ld_aligned_shf_merge=yes
+case "$target" in
+ # SHF_MERGE support is broken in Solaris ld up to Solaris 11.3/SPARC for
+ # alignment > 1.
+ sparc*-*-solaris2.11*)
+ if test x"$gnu_ld" = xno \
+ && test "$ld_vers_major" -lt 2 && test "$ld_vers_minor" -lt 3159; then
+ gcc_cv_ld_aligned_shf_merge=no
+ fi
+ ;;
+esac
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_LD_ALIGNED_SHF_MERGE `if test $gcc_cv_ld_aligned_shf_merge = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for stabs directive" >&5
+$as_echo_n "checking assembler for stabs directive... " >&6; }
+if ${gcc_cv_as_stabs_directive+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_stabs_directive=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.stabs "gcc2_compiled.",60,0,0,0' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_stabs_directive=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_stabs_directive" >&5
+$as_echo "$gcc_cv_as_stabs_directive" >&6; }
+if test $gcc_cv_as_stabs_directive = yes; then
+
+$as_echo "#define HAVE_AS_STABS_DIRECTIVE 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for COMDAT group support (GNU as)" >&5
+$as_echo_n "checking assembler for COMDAT group support (GNU as)... " >&6; }
+if ${gcc_cv_as_comdat_group+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_comdat_group=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.section .text,"axG",@progbits,.foo,comdat' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags --fatal-warnings -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_comdat_group=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_comdat_group" >&5
+$as_echo "$gcc_cv_as_comdat_group" >&6; }
+
+
+if test $gcc_cv_as_comdat_group = yes; then
+ gcc_cv_as_comdat_group_percent=no
+ gcc_cv_as_comdat_group_group=no
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for COMDAT group support (GNU as, %type)" >&5
+$as_echo_n "checking assembler for COMDAT group support (GNU as, %type)... " >&6; }
+if ${gcc_cv_as_comdat_group_percent+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_comdat_group_percent=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.section .text,"axG",%progbits,.foo,comdat' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags --fatal-warnings -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_comdat_group_percent=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_comdat_group_percent" >&5
+$as_echo "$gcc_cv_as_comdat_group_percent" >&6; }
+
+
+ if test $gcc_cv_as_comdat_group_percent = yes; then
+ gcc_cv_as_comdat_group_group=no
+ else
+ case "${target}" in
+ # Sun as uses a completely different syntax.
+ *-*-solaris2*)
+ case "${target}" in
+ sparc*-*-solaris2*)
+ conftest_s='
+ .group foo,".text%foo",#comdat
+ .section ".text%foo", #alloc,#execinstr,#progbits
+ .globl foo
+ foo:
+ '
+ ;;
+ i?86-*-solaris2* | x86_64-*-solaris2*)
+ conftest_s='
+ .group foo,.text%foo,#comdat
+ .section .text%foo, "ax", @progbits
+ .globl foo
+ foo:
+ '
+ ;;
+ esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for COMDAT group support (Sun as, .group)" >&5
+$as_echo_n "checking assembler for COMDAT group support (Sun as, .group)... " >&6; }
+if ${gcc_cv_as_comdat_group_group+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_comdat_group_group=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_comdat_group_group=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_comdat_group_group" >&5
+$as_echo "$gcc_cv_as_comdat_group_group" >&6; }
+
+
+ ;;
+ esac
+ if test -z "${gcc_cv_as_comdat_group_group+set}"; then
+ gcc_cv_as_comdat_group_group=no
+ fi
+ fi
+fi
+if test x"$ld_is_gold" = xyes; then
+ comdat_group=yes
+elif test x"$ld_is_mold" = xyes; then
+ comdat_group=yes
+elif test $in_tree_ld = yes ; then
+ comdat_group=no
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 16 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ comdat_group=yes
+ fi
+elif echo "$ld_ver" | grep GNU > /dev/null; then
+ comdat_group=yes
+ if test 0"$ld_date" -lt 20050308; then
+ if test -n "$ld_date"; then
+ # If there was date string, but was earlier than 2005-03-08, fail
+ comdat_group=no
+ elif test "$ld_vers_major" -lt 2; then
+ comdat_group=no
+ elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 16; then
+ comdat_group=no
+ fi
+ fi
+else
+ case "${target}" in
+ *-*-solaris2.1[1-9]*)
+ comdat_group=no
+ # Sun ld has COMDAT group support since Solaris 9, but it doesn't
+ # interoperate with GNU as until Solaris 11 build 130, i.e. ld
+ # version 1.688.
+ #
+ # If using Sun as for COMDAT group as emitted by GCC, one needs at
+ # least ld version 1.2267.
+ if test "$ld_vers_major" -gt 1; then
+ comdat_group=yes
+ elif test "x$gas_flag" = xyes && test "$ld_vers_minor" -ge 1688; then
+ comdat_group=yes
+ elif test "$ld_vers_minor" -ge 2267; then
+ comdat_group=yes
+ fi
+ ;;
+ *)
+ # Assume linkers other than GNU ld don't support COMDAT group.
+ comdat_group=no
+ ;;
+ esac
+fi
+# Allow overriding the automatic COMDAT group tests above.
+# Check whether --enable-comdat was given.
+if test "${enable_comdat+set}" = set; then :
+ enableval=$enable_comdat; comdat_group="$enable_comdat"
+fi
+
+if test $comdat_group = no; then
+ gcc_cv_as_comdat_group=no
+ gcc_cv_as_comdat_group_percent=no
+ gcc_cv_as_comdat_group_group=no
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_COMDAT_GROUP `if test $gcc_cv_as_comdat_group = yes \
+ || test $gcc_cv_as_comdat_group_percent = yes \
+ || test $gcc_cv_as_comdat_group_group = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+
+# Restrict this test to Solaris/x86: other targets define this statically.
+case "${target}" in
+ i?86-*-solaris2* | x86_64-*-solaris2*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking support for hidden thunks in linkonce sections" >&5
+$as_echo_n "checking support for hidden thunks in linkonce sections... " >&6; }
+ if test $in_tree_ld = yes || echo "$ld_ver" | grep GNU > /dev/null; then
+ hidden_linkonce=yes
+ else
+ case "${target}" in
+ # Full support for hidden thunks in linkonce sections only appeared in
+ # Solaris 11/OpenSolaris.
+ *-*-solaris2.1[1-9]*)
+ hidden_linkonce=yes
+ ;;
+ *)
+ hidden_linkonce=no
+ ;;
+ esac
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hidden_linkonce" >&5
+$as_echo "$hidden_linkonce" >&6; }
+
+cat >>confdefs.h <<_ACEOF
+#define USE_HIDDEN_LINKONCE `if test $hidden_linkonce = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+ ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for line table is_stmt support" >&5
+$as_echo_n "checking assembler for line table is_stmt support... " >&6; }
+if ${gcc_cv_as_is_stmt+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_is_stmt=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .text
+ .file 1 "conf.c"
+ .loc 1 1 0 is_stmt 1' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_is_stmt=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_is_stmt" >&5
+$as_echo "$gcc_cv_as_is_stmt" >&6; }
+if test $gcc_cv_as_is_stmt = yes; then
+
+$as_echo "#define HAVE_GAS_LOC_STMT 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for line table discriminator support" >&5
+$as_echo_n "checking assembler for line table discriminator support... " >&6; }
+if ${gcc_cv_as_discriminator+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_discriminator=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .text
+ .file 1 "conf.c"
+ .loc 1 1 0 discriminator 1' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_discriminator=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_discriminator" >&5
+$as_echo "$gcc_cv_as_discriminator" >&6; }
+if test $gcc_cv_as_discriminator = yes; then
+
+$as_echo "#define HAVE_GAS_DISCRIMINATOR 1" >>confdefs.h
+
+fi
+
+
+# Catch the newlib flag of the same name so we can gate GCC features on it.
+# Check whether --enable-newlib-nano-formatted-io was given.
+if test "${enable_newlib_nano_formatted_io+set}" = set; then :
+ enableval=$enable_newlib_nano_formatted_io; case "${enableval}" in
+ yes|no)
+ ;;
+ *)
+ as_fn_error $? "unknown newlib-nano-formatted-io setting $enableval" "$LINENO" 5
+ ;;
+esac
+fi
+
+
+# Thread-local storage - the check is heavily parameterized.
+conftest_s=
+tls_as_opt=
+case "$target" in
+ alpha*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ ldq $27,__tls_get_addr($29) !literal!1
+ lda $16,foo($29) !tlsgd!1
+ jsr $26,($27),__tls_get_addr !lituse_tlsgd!1
+ ldq $27,__tls_get_addr($29) !literal!2
+ lda $16,foo($29) !tlsldm!2
+ jsr $26,($27),__tls_get_addr !lituse_tlsldm!2
+ ldq $1,foo($29) !gotdtprel
+ ldah $2,foo($29) !dtprelhi
+ lda $3,foo($2) !dtprello
+ lda $4,foo($29) !dtprel
+ ldq $1,foo($29) !gottprel
+ ldah $2,foo($29) !tprelhi
+ lda $3,foo($2) !tprello
+ lda $4,foo($29) !tprel'
+ tls_as_opt=--fatal-warnings
+ ;;
+ arc*-*-*)
+ conftest_s='
+ add_s r0,r0, @foo@tpoff'
+ ;;
+ cris-*-*|crisv32-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+x: .long 25
+ .text
+ move.d x:IE,$r10
+ nop'
+ tls_as_opt=--fatal-warnings
+ ;;
+ frv*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+x: .long 25
+ .text
+ call #gettlsoff(x)'
+ ;;
+ hppa*-*-linux*)
+ conftest_s='
+t1: .reg %r20
+t2: .reg %r21
+gp: .reg %r19
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ .align 4
+ addil LT%foo-$tls_gdidx$,gp
+ ldo RT%foo-$tls_gdidx$(%r1),%arg0
+ b __tls_get_addr
+ nop
+ addil LT%foo-$tls_ldidx$,gp
+ b __tls_get_addr
+ ldo RT%foo-$tls_ldidx$(%r1),%arg0
+ addil LR%foo-$tls_dtpoff$,%ret0
+ ldo RR%foo-$tls_dtpoff$(%r1),%t1
+ mfctl %cr27,%t1
+ addil LT%foo-$tls_ieoff$,gp
+ ldw RT%foo-$tls_ieoff$(%r1),%t2
+ add %t1,%t2,%t3
+ mfctl %cr27,%t1
+ addil LR%foo-$tls_leoff$,%t1
+ ldo RR%foo-$tls_leoff$(%r1),%t2'
+ tls_as_opt=--fatal-warnings
+ ;;
+ arm*-*-*)
+ conftest_s='
+ .section ".tdata","awT",%progbits
+foo: .long 25
+ .text
+.word foo(gottpoff)
+.word foo(tpoff)
+.word foo(tlsgd)
+.word foo(tlsldm)
+.word foo(tlsldo)'
+ ;;
+ i[34567]86-*-* | x86_64-*-*)
+ case "$target" in
+ i[34567]86-*-solaris2.* | x86_64-*-solaris2.*)
+ on_solaris=yes
+ ;;
+ *)
+ on_solaris=no
+ ;;
+ esac
+ if test x$on_solaris = xyes && test x$gas_flag = xno; then
+ conftest_s='
+ .section .tdata,"awt",@progbits'
+ tls_section_flag=t
+
+$as_echo "#define TLS_SECTION_ASM_FLAG 't'" >>confdefs.h
+
+ else
+ conftest_s='
+ .section ".tdata","awT",@progbits'
+ tls_section_flag=T
+ tls_as_opt="--fatal-warnings"
+ fi
+ case "$target" in
+ i[34567]86-*-*)
+ if test x$on_solaris = xyes; then
+ case $gas_flag in
+ yes) tls_as_opt="$tls_as_opt --32" ;;
+ esac
+ fi
+ conftest_s="$conftest_s
+foo: .long 25
+ .text
+ movl %gs:0, %eax
+ leal foo@tlsgd(,%ebx,1), %eax
+ leal foo@tlsldm(%ebx), %eax
+ leal foo@dtpoff(%eax), %edx
+ movl foo@gottpoff(%ebx), %eax
+ subl foo@gottpoff(%ebx), %eax
+ addl foo@gotntpoff(%ebx), %eax
+ movl foo@indntpoff, %eax
+ movl \$foo@tpoff, %eax
+ subl \$foo@tpoff, %eax
+ leal foo@ntpoff(%ecx), %eax"
+ ;;
+ x86_64-*-*)
+ if test x$on_solaris = xyes; then
+ case $gas_flag in
+ yes) tls_as_opt="$tls_as_opt --64" ;;
+ no) tls_as_opt="$tls_as_opt -xarch=amd64" ;;
+ esac
+ fi
+ conftest_s="$conftest_s
+foo: .long 25
+ .text
+ movq %fs:0, %rax
+ leaq foo@tlsgd(%rip), %rdi
+ leaq foo@tlsld(%rip), %rdi
+ leaq foo@dtpoff(%rax), %rdx
+ movq foo@gottpoff(%rip), %rax
+ movq \$foo@tpoff, %rax"
+ ;;
+ esac
+ ;;
+ ia64-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: data8 25
+ .text
+ addl r16 = @ltoff(@dtpmod(foo#)), gp
+ addl r17 = @ltoff(@dtprel(foo#)), gp
+ addl r18 = @ltoff(@tprel(foo#)), gp
+ addl r19 = @dtprel(foo#), gp
+ adds r21 = @dtprel(foo#), r13
+ movl r23 = @dtprel(foo#)
+ addl r20 = @tprel(foo#), gp
+ adds r22 = @tprel(foo#), r13
+ movl r24 = @tprel(foo#)'
+ tls_as_opt=--fatal-warnings
+ ;;
+ loongarch*-*-*)
+ conftest_s='
+ .section .tdata,"awT",@progbits
+x: .word 2
+ .text
+ la.tls.gd $a0,x
+ bl __tls_get_addr'
+ tls_first_major=0
+ tls_first_minor=0
+ tls_as_opt='--fatal-warnings'
+ ;;
+ microblaze*-*-*)
+ conftest_s='
+ .section .tdata,"awT",@progbits
+x:
+ .word 2
+ .text
+ addik r5,r20,x@TLSGD
+ addik r5,r20,x@TLSLDM'
+ tls_as_opt='--fatal-warnings'
+ ;;
+ mips*-*-*)
+ conftest_s='
+ .section .tdata,"awT",@progbits
+x:
+ .word 2
+ .text
+ addiu $4, $28, %tlsgd(x)
+ addiu $4, $28, %tlsldm(x)
+ lui $4, %dtprel_hi(x)
+ addiu $4, $4, %dtprel_lo(x)
+ lw $4, %gottprel(x)($28)
+ lui $4, %tprel_hi(x)
+ addiu $4, $4, %tprel_lo(x)'
+ tls_as_opt='-32 --fatal-warnings'
+ ;;
+ m68k-*-*)
+ conftest_s='
+ .section .tdata,"awT",@progbits
+x:
+ .word 2
+ .text
+foo:
+ move.l x@TLSGD(%a5),%a0
+ move.l x@TLSLDM(%a5),%a0
+ move.l x@TLSLDO(%a5),%a0
+ move.l x@TLSIE(%a5),%a0
+ move.l x@TLSLE(%a5),%a0'
+ tls_as_opt='--fatal-warnings'
+ ;;
+ nios2-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits'
+ tls_as_opt="--fatal-warnings"
+ ;;
+ aarch64*-*-*)
+ conftest_s='
+ .section ".tdata","awT",%progbits
+foo: .long 25
+ .text
+ adrp x0, :tlsgd:x
+ add x0, x0, #:tlsgd_lo12:x
+ bl __tls_get_addr
+ nop'
+ tls_as_opt='--fatal-warnings'
+ ;;
+ or1k*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ l.movhi r3, tpoffha(foo)
+ l.add r3, r3, r10
+ l.lwz r4, tpofflo(foo)(r3)'
+ tls_as_opt=--fatal-warnings
+ ;;
+ powerpc-ibm-aix*)
+ conftest_s='
+ .extern __get_tpointer
+ .toc
+LC..1:
+ .tc a[TC],a[TL]@le
+ .csect .text[PR]
+.tlstest:
+ lwz 9,LC..1(2)
+ bla __get_tpointer
+ lwzx 3,9,3
+ .globl a
+ .csect a[TL],4
+a:
+ .space 4'
+ ;;
+ powerpc64*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+ .align 3
+ld0: .space 8
+ld1: .space 8
+x1: .space 8
+x2: .space 8
+x3: .space 8
+ .text
+ addi 3,2,ld0@got@tlsgd
+ bl .__tls_get_addr
+ nop
+ addi 3,2,ld1@toc
+ bl .__tls_get_addr
+ nop
+ addi 3,2,x1@got@tlsld
+ bl .__tls_get_addr
+ nop
+ addi 9,3,x1@dtprel
+ bl .__tls_get_addr
+ nop
+ addis 9,3,x2@dtprel@ha
+ addi 9,9,x2@dtprel@l
+ bl .__tls_get_addr
+ nop
+ ld 9,x3@got@dtprel(2)
+ add 9,9,3
+ bl .__tls_get_addr
+ nop'
+ tls_as_opt="-a64 --fatal-warnings"
+ ;;
+ powerpc*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+ .align 2
+ld0: .space 4
+ld1: .space 4
+x1: .space 4
+x2: .space 4
+x3: .space 4
+ .text
+ addi 3,31,ld0@got@tlsgd
+ bl __tls_get_addr
+ addi 3,31,x1@got@tlsld
+ bl __tls_get_addr
+ addi 9,3,x1@dtprel
+ addis 9,3,x2@dtprel@ha
+ addi 9,9,x2@dtprel@l
+ lwz 9,x3@got@tprel(31)
+ add 9,9,x@tls
+ addi 9,2,x1@tprel
+ addis 9,2,x2@tprel@ha
+ addi 9,9,x2@tprel@l'
+ tls_as_opt="-a32 --fatal-warnings"
+ ;;
+ riscv*-*-*)
+ conftest_s='
+ .section .tdata,"awT",@progbits
+x: .word 2
+ .text
+ la.tls.gd a0,x
+ call __tls_get_addr'
+ tls_as_opt='--fatal-warnings'
+ ;;
+ s390-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ .long foo@TLSGD
+ .long foo@TLSLDM
+ .long foo@DTPOFF
+ .long foo@NTPOFF
+ .long foo@GOTNTPOFF
+ .long foo@INDNTPOFF
+ l %r1,foo@GOTNTPOFF(%r12)
+ l %r1,0(%r1):tls_load:foo
+ bas %r14,0(%r1,%r13):tls_gdcall:foo
+ bas %r14,0(%r1,%r13):tls_ldcall:foo'
+ tls_as_opt="-m31 --fatal-warnings"
+ ;;
+ s390x-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ .quad foo@TLSGD
+ .quad foo@TLSLDM
+ .quad foo@DTPOFF
+ .quad foo@NTPOFF
+ .quad foo@GOTNTPOFF
+ lg %r1,foo@GOTNTPOFF(%r12)
+ larl %r1,foo@INDNTPOFF
+ brasl %r14,__tls_get_offset@PLT:tls_gdcall:foo
+ brasl %r14,__tls_get_offset@PLT:tls_ldcall:foo'
+ tls_as_opt="-m64 -Aesame --fatal-warnings"
+ ;;
+ sh-*-* | sh[123456789lbe]*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ .long foo@TLSGD
+ .long foo@TLSLDM
+ .long foo@DTPOFF
+ .long foo@GOTTPOFF
+ .long foo@TPOFF'
+ tls_as_opt=--fatal-warnings
+ ;;
+ sparc*-*-*)
+ case "$target" in
+ sparc*-sun-solaris2.*)
+ on_solaris=yes
+ ;;
+ *)
+ on_solaris=no
+ ;;
+ esac
+ if test x$on_solaris = xyes && test x$gas_flag = xno; then
+ conftest_s='
+ .section ".tdata",#alloc,#write,#tls'
+ else
+ conftest_s='
+ .section ".tdata","awT",@progbits'
+ tls_as_opt="-32 --fatal-warnings"
+ fi
+ conftest_s="$conftest_s
+foo: .long 25
+ .text
+ sethi %tgd_hi22(foo), %o0
+ add %o0, %tgd_lo10(foo), %o1
+ add %l7, %o1, %o0, %tgd_add(foo)
+ call __tls_get_addr, %tgd_call(foo)
+ sethi %tldm_hi22(foo), %l1
+ add %l1, %tldm_lo10(foo), %l2
+ add %l7, %l2, %o0, %tldm_add(foo)
+ call __tls_get_addr, %tldm_call(foo)
+ sethi %tldo_hix22(foo), %l3
+ xor %l3, %tldo_lox10(foo), %l4
+ add %o0, %l4, %l5, %tldo_add(foo)
+ sethi %tie_hi22(foo), %o3
+ add %o3, %tie_lo10(foo), %o3
+ ld [%l7 + %o3], %o2, %tie_ld(foo)
+ add %g7, %o2, %o4, %tie_add(foo)
+ sethi %tle_hix22(foo), %l1
+ xor %l1, %tle_lox10(foo), %o5
+ ld [%g7 + %o5], %o1"
+ ;;
+ tilepro*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ addli r0, zero, tls_gd(foo)
+ auli r0, zero, tls_gd_ha16(foo)
+ addli r0, r0, tls_gd_lo16(foo)
+ jal __tls_get_addr
+ addli r0, zero, tls_ie(foo)
+ auli r0, r0, tls_ie_ha16(foo)
+ addli r0, r0, tls_ie_lo16(foo)'
+ tls_as_opt="--fatal-warnings"
+ ;;
+ tilegx*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ shl16insli r0, zero, hw0_last_tls_gd(foo)
+ shl16insli r0, zero, hw1_last_tls_gd(foo)
+ shl16insli r0, r0, hw0_tls_gd(foo)
+ jal __tls_get_addr
+ shl16insli r0, zero, hw1_last_tls_ie(foo)
+ shl16insli r0, r0, hw0_tls_ie(foo)'
+ tls_as_opt="--fatal-warnings"
+ ;;
+ xtensa*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ movi a8, foo@TLSFUNC
+ movi a10, foo@TLSARG
+ callx8.tls a8, foo@TLSCALL'
+ ;;
+esac
+set_have_as_tls=no
+if test "x$enable_tls" = xno ; then
+ : # TLS explicitly disabled.
+elif test "x$enable_tls" = xyes ; then
+ set_have_as_tls=yes # TLS explicitly enabled.
+elif test -z "$conftest_s"; then
+ : # If we don't have a check, assume no support.
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for thread-local storage support" >&5
+$as_echo_n "checking assembler for thread-local storage support... " >&6; }
+if ${gcc_cv_as_tls+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_tls=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags $tls_as_opt -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_tls=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_tls" >&5
+$as_echo "$gcc_cv_as_tls" >&6; }
+if test $gcc_cv_as_tls = yes; then
+ set_have_as_tls=yes
+fi
+
+fi
+if test $set_have_as_tls = yes ; then
+
+$as_echo "#define HAVE_AS_TLS 1" >>confdefs.h
+
+fi
+
+# Target-specific assembler checks.
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker -Bstatic/-Bdynamic option" >&5
+$as_echo_n "checking linker -Bstatic/-Bdynamic option... " >&6; }
+gcc_cv_ld_static_dynamic=no
+gcc_cv_ld_static_option='-Bstatic'
+gcc_cv_ld_dynamic_option='-Bdynamic'
+if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 10 -o "$gcc_cv_gld_major_version" -gt 2; then
+ gcc_cv_ld_static_dynamic=yes
+ fi
+elif test x$gcc_cv_ld != x; then
+ # Check if linker supports -Bstatic/-Bdynamic option
+ if $gcc_cv_ld --help 2>&1 | grep -- -Bstatic > /dev/null \
+ && $gcc_cv_ld --help 2>&1 | grep -- -Bdynamic > /dev/null; then
+ gcc_cv_ld_static_dynamic=yes
+ else
+ case "$target" in
+ # AIX ld uses -b flags
+ *-*-aix4.[23]* | *-*-aix[5-9]*)
+ gcc_cv_ld_static_dynamic=yes
+ gcc_cv_ld_static_option="-bstatic"
+ gcc_cv_ld_dynamic_option="-bdynamic"
+ ;;
+ # HP-UX ld uses -a flags to select between shared and archive.
+ *-*-hpux*)
+ if test x"$gnu_ld" = xno; then
+ gcc_cv_ld_static_dynamic=yes
+ gcc_cv_ld_static_option="-aarchive_shared"
+ gcc_cv_ld_dynamic_option="-adefault"
+ fi
+ ;;
+ # Solaris 2 ld always supports -Bstatic/-Bdynamic.
+ *-*-solaris2*)
+ gcc_cv_ld_static_dynamic=yes
+ ;;
+ esac
+ fi
+fi
+if test x"$gcc_cv_ld_static_dynamic" = xyes; then
+
+$as_echo "#define HAVE_LD_STATIC_DYNAMIC 1" >>confdefs.h
+
+
+cat >>confdefs.h <<_ACEOF
+#define LD_STATIC_OPTION "$gcc_cv_ld_static_option"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define LD_DYNAMIC_OPTION "$gcc_cv_ld_dynamic_option"
+_ACEOF
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_static_dynamic" >&5
+$as_echo "$gcc_cv_ld_static_dynamic" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker --version-script option" >&5
+$as_echo_n "checking linker --version-script option... " >&6; }
+gcc_cv_ld_version_script=no
+ld_version_script_option=''
+if test $in_tree_ld = yes || test x"$gnu_ld" = xyes; then
+ gcc_cv_ld_version_script=yes
+ ld_version_script_option='--version-script'
+elif test x$gcc_cv_ld != x; then
+ case "$target" in
+ # Solaris 2 ld always supports -M. It also supports a subset of
+ # --version-script since Solaris 11.4, but requires
+ # -z gnu-version-script-compat to activate.
+ *-*-solaris2*)
+ gcc_cv_ld_version_script=yes
+ ld_version_script_option='-M'
+ ;;
+ esac
+fi
+# Don't AC_DEFINE result, only used in jit/Make-lang.in so far.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_version_script" >&5
+$as_echo "$gcc_cv_ld_version_script" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker soname option" >&5
+$as_echo_n "checking linker soname option... " >&6; }
+gcc_cv_ld_soname=no
+if test $in_tree_ld = yes || test x"$gnu_ld" = xyes; then
+ gcc_cv_ld_soname=yes
+ ld_soname_option='-soname'
+elif test x$gcc_cv_ld != x; then
+ case "$target" in
+ *-*-darwin*)
+ gcc_cv_ld_soname=yes
+ ld_soname_option='-install_name'
+ ;;
+ # Solaris 2 ld always supports -h. It also supports --soname for GNU
+ # ld compatiblity since some Solaris 10 update.
+ *-*-solaris2*)
+ gcc_cv_ld_soname=yes
+ ld_soname_option='-h'
+ ;;
+ esac
+fi
+# Don't AC_DEFINE result, only used in jit/Make-lang.in so far.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_soname" >&5
+$as_echo "$gcc_cv_ld_soname" >&6; }
+
+
+if test x"$demangler_in_ld" = xyes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking linker --demangle support" >&5
+$as_echo_n "checking linker --demangle support... " >&6; }
+ gcc_cv_ld_demangle=no
+ if test $in_tree_ld = yes; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 14 -o "$gcc_cv_gld_major_version" -gt 2; then \
+ gcc_cv_ld_demangle=yes
+ fi
+ elif test x$gcc_cv_ld != x -a x"$gnu_ld" = xyes; then
+ # Check if the GNU linker supports --demangle option
+ if $gcc_cv_ld --help 2>&1 | grep no-demangle > /dev/null; then
+ gcc_cv_ld_demangle=yes
+ fi
+ fi
+ if test x"$gcc_cv_ld_demangle" = xyes; then
+
+$as_echo "#define HAVE_LD_DEMANGLE 1" >>confdefs.h
+
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_demangle" >&5
+$as_echo "$gcc_cv_ld_demangle" >&6; }
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker plugin support" >&5
+$as_echo_n "checking linker plugin support... " >&6; }
+gcc_cv_lto_plugin=0
+if test -f liblto_plugin.la; then
+ save_ld_ver="$ld_ver"
+ save_ld_vers_major="$ld_vers_major"
+ save_ld_vers_minor="$ld_vers_minor"
+ save_ld_is_gold="$ld_is_gold"
+
+ ld_is_gold=no
+
+ if test $in_tree_ld = yes -a x"$ORIGINAL_PLUGIN_LD_FOR_TARGET" = x"$gcc_cv_ld"; then
+ ld_ver="GNU ld"
+ # FIXME: ld_is_gold?
+ ld_vers_major="$gcc_cv_gld_major_version"
+ ld_vers_minor="$gcc_cv_gld_minor_version"
+ else
+ # Determine plugin linker version.
+ # FIXME: Partial duplicate from above, generalize.
+ ld_ver=`$ORIGINAL_PLUGIN_LD_FOR_TARGET --version 2>/dev/null | sed 1q`
+ if echo "$ld_ver" | grep GNU > /dev/null; then
+ if echo "$ld_ver" | grep "GNU gold" > /dev/null; then
+ ld_is_gold=yes
+ ld_vers=`echo $ld_ver | sed -n \
+ -e 's,^[^)]*[ ]\([0-9][0-9]*\.[0-9][0-9]*[^)]*\)) .*$,\1,p'`
+ else
+ ld_vers=`echo $ld_ver | sed -n \
+ -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*.*\)$,\1,p'`
+ fi
+ ld_vers_major=`expr "$ld_vers" : '\([0-9]*\)'`
+ ld_vers_minor=`expr "$ld_vers" : '[0-9]*\.\([0-9]*\)'`
+ fi
+ fi
+
+ # Determine plugin support.
+ if echo "$ld_ver" | grep GNU > /dev/null; then
+ # Require GNU ld or gold 2.21+ for plugin support by default.
+ if test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -ge 21; then
+ gcc_cv_lto_plugin=2
+ elif test "$ld_is_mold" = yes; then
+ gcc_cv_lto_plugin=2
+ # Allow -fuse-linker-plugin to enable plugin support in GNU gold 2.20.
+ elif test "$ld_is_gold" = yes -a "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -eq 20; then
+ gcc_cv_lto_plugin=1
+ fi
+ fi
+
+ ld_ver="$save_ld_ver"
+ ld_vers_major="$save_ld_vers_major"
+ ld_vers_minor="$save_ld_vers_minor"
+ ld_is_gold="$save_ld_is_gold"
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_LTO_PLUGIN $gcc_cv_lto_plugin
+_ACEOF
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_lto_plugin" >&5
+$as_echo "$gcc_cv_lto_plugin" >&6; }
+
+# Target OS-specific assembler checks.
+
+case "$target_os" in
+ darwin*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for -mmacosx-version-min option" >&5
+$as_echo_n "checking assembler for -mmacosx-version-min option... " >&6; }
+if ${gcc_cv_as_mmacosx_version_min+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_mmacosx_version_min=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.text' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -mmacosx-version-min=10.1 -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_mmacosx_version_min=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_mmacosx_version_min" >&5
+$as_echo "$gcc_cv_as_mmacosx_version_min" >&6; }
+if test $gcc_cv_as_mmacosx_version_min = yes; then
+
+$as_echo "#define HAVE_AS_MMACOSX_VERSION_MIN_OPTION 1" >>confdefs.h
+
+fi
+
+ ;;
+esac
+
+# Target CPU-specific assembler checks.
+
+case "$target" in
+ aarch64*-*-*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for -mabi option" >&5
+$as_echo_n "checking assembler for -mabi option... " >&6; }
+if ${gcc_cv_as_aarch64_mabi+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_aarch64_mabi=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.text' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -mabi=lp64 -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_aarch64_mabi=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_aarch64_mabi" >&5
+$as_echo "$gcc_cv_as_aarch64_mabi" >&6; }
+
+
+ if test x$gcc_cv_as_aarch64_mabi = xyes; then
+
+$as_echo "#define HAVE_AS_MABI_OPTION 1" >>confdefs.h
+
+ else
+ if test x$with_abi = xilp32; then
+ as_fn_error $? "Assembler does not support -mabi=ilp32.\
+ Upgrade the Assembler." "$LINENO" 5
+ fi
+ if test x"$with_multilib_list" = xdefault; then
+ TM_MULTILIB_CONFIG=lp64
+ else
+ aarch64_multilibs=`echo $with_multilib_list | sed -e 's/,/ /g'`
+ for aarch64_multilib in ${aarch64_multilibs}; do
+ case ${aarch64_multilib} in
+ ilp32)
+ as_fn_error $? "Assembler does not support -mabi=ilp32.\
+ Upgrade the Assembler." "$LINENO" 5
+ ;;
+ *)
+ ;;
+ esac
+ done
+ fi
+ fi
+ # Check if we have binutils support for relocations types needed by -fpic
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for -fpic relocs" >&5
+$as_echo_n "checking assembler for -fpic relocs... " >&6; }
+if ${gcc_cv_as_aarch64_picreloc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_aarch64_picreloc=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '
+ .text
+ ldr x0, [x2, #:gotpage_lo15:globalsym]
+ ' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_aarch64_picreloc=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_aarch64_picreloc" >&5
+$as_echo "$gcc_cv_as_aarch64_picreloc" >&6; }
+if test $gcc_cv_as_aarch64_picreloc = yes; then
+
+$as_echo "#define HAVE_AS_SMALL_PIC_RELOCS 1" >>confdefs.h
+
+fi
+
+ # Enable Branch Target Identification Mechanism and Return Address
+ # Signing by default.
+ # Check whether --enable-standard-branch-protection was given.
+if test "${enable_standard_branch_protection+set}" = set; then :
+ enableval=$enable_standard_branch_protection;
+ case $enableval in
+ yes)
+ tm_defines="${tm_defines} TARGET_ENABLE_BTI=1 TARGET_ENABLE_PAC_RET=1"
+ ;;
+ no)
+ ;;
+ *)
+ as_fn_error $? "'$enableval' is an invalid value for --enable-standard-branch-protection.\
+ Valid choices are 'yes' and 'no'." "$LINENO" 5
+ ;;
+ esac
+
+fi
+
+ # Enable default workaround for AArch64 Cortex-A53 erratum 835769.
+ # Check whether --enable-fix-cortex-a53-835769 was given.
+if test "${enable_fix_cortex_a53_835769+set}" = set; then :
+ enableval=$enable_fix_cortex_a53_835769;
+ case $enableval in
+ yes)
+ tm_defines="${tm_defines} TARGET_FIX_ERR_A53_835769_DEFAULT=1"
+ ;;
+ no)
+ ;;
+ *)
+ as_fn_error $? "'$enableval' is an invalid value for --enable-fix-cortex-a53-835769.\
+ Valid choices are 'yes' and 'no'." "$LINENO" 5
+ ;;
+
+ esac
+
+fi
+
+ # Enable default workaround for AArch64 Cortex-A53 erratum 843419.
+ # Check whether --enable-fix-cortex-a53-843419 was given.
+if test "${enable_fix_cortex_a53_843419+set}" = set; then :
+ enableval=$enable_fix_cortex_a53_843419;
+ case $enableval in
+ yes)
+ tm_defines="${tm_defines} TARGET_FIX_ERR_A53_843419_DEFAULT=1"
+ ;;
+ no)
+ ;;
+ *)
+ as_fn_error $? "'$enableval' is an invalid value for --enable-fix-cortex-a53-843419.\
+ Valid choices are 'yes' and 'no'." "$LINENO" 5
+ ;;
+
+ esac
+
+fi
+
+ ;;
+
+ # All TARGET_ABI_OSF targets.
+ alpha*-*-linux* | alpha*-*-*bsd*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for explicit relocation support" >&5
+$as_echo_n "checking assembler for explicit relocation support... " >&6; }
+if ${gcc_cv_as_alpha_explicit_relocs+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_alpha_explicit_relocs=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .set nomacro
+ .text
+ extbl $3, $2, $3 !lituse_bytoff!1
+ ldq $2, a($29) !literal!1
+ ldq $4, b($29) !literal!2
+ ldq_u $3, 0($2) !lituse_base!1
+ ldq $27, f($29) !literal!5
+ jsr $26, ($27), f !lituse_jsr!5
+ ldah $29, 0($26) !gpdisp!3
+ lda $0, c($29) !gprel
+ ldah $1, d($29) !gprelhigh
+ lda $1, d($1) !gprellow
+ lda $29, 0($29) !gpdisp!3' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_alpha_explicit_relocs=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_alpha_explicit_relocs" >&5
+$as_echo "$gcc_cv_as_alpha_explicit_relocs" >&6; }
+if test $gcc_cv_as_alpha_explicit_relocs = yes; then
+
+$as_echo "#define HAVE_AS_EXPLICIT_RELOCS 1" >>confdefs.h
+
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for jsrdirect relocation support" >&5
+$as_echo_n "checking assembler for jsrdirect relocation support... " >&6; }
+if ${gcc_cv_as_alpha_jsrdirect_relocs+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_alpha_jsrdirect_relocs=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .set nomacro
+ .text
+ ldq $27, a($29) !literal!1
+ jsr $26, ($27), a !lituse_jsrdirect!1' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_alpha_jsrdirect_relocs=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_alpha_jsrdirect_relocs" >&5
+$as_echo "$gcc_cv_as_alpha_jsrdirect_relocs" >&6; }
+if test $gcc_cv_as_alpha_jsrdirect_relocs = yes; then
+
+$as_echo "#define HAVE_AS_JSRDIRECT_RELOCS 1" >>confdefs.h
+
+fi
+
+ ;;
+
+ avr-*-*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for --mlink-relax option" >&5
+$as_echo_n "checking assembler for --mlink-relax option... " >&6; }
+if ${gcc_cv_as_avr_mlink_relax+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_avr_mlink_relax=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.text' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags --mlink-relax -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_avr_mlink_relax=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_avr_mlink_relax" >&5
+$as_echo "$gcc_cv_as_avr_mlink_relax" >&6; }
+if test $gcc_cv_as_avr_mlink_relax = yes; then
+
+$as_echo "#define HAVE_AS_AVR_MLINK_RELAX_OPTION 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for -mrmw option" >&5
+$as_echo_n "checking assembler for -mrmw option... " >&6; }
+if ${gcc_cv_as_avr_mrmw+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_avr_mrmw=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.text' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -mrmw -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_avr_mrmw=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_avr_mrmw" >&5
+$as_echo "$gcc_cv_as_avr_mrmw" >&6; }
+if test $gcc_cv_as_avr_mrmw = yes; then
+
+$as_echo "#define HAVE_AS_AVR_MRMW_OPTION 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for __gcc_isr pseudo instruction" >&5
+$as_echo_n "checking assembler for __gcc_isr pseudo instruction... " >&6; }
+if ${gcc_cv_as_avr_mgccisr+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_avr_mgccisr=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.text
+ __gcc_isr 1
+ __gcc_isr 2
+ __gcc_isr 0,r24
+ ' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -mgcc-isr -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_avr_mgccisr=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_avr_mgccisr" >&5
+$as_echo "$gcc_cv_as_avr_mgccisr" >&6; }
+if test $gcc_cv_as_avr_mgccisr = yes; then
+
+$as_echo "#define HAVE_AS_AVR_MGCCISR_OPTION 1" >>confdefs.h
+
+fi
+
+
+ # Check how default linker description file implements .rodata for
+ # avrxmega3 (PR21472). avr-gcc assumes .rodata is *not* loaded to
+ # RAM so avr-gcc skips __do_copy_data for .rodata objects.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking binutils for avrxmega3 .rodata support" >&5
+$as_echo_n "checking binutils for avrxmega3 .rodata support... " >&6; }
+ cat > conftest.s <<EOF
+ .section .rodata,"a",@progbits
+ .global xxvaryy
+ ;; avr-nm should print "... R xxvaryy", not "... D xxvaryy".
+ xxvaryy:
+ .word 1
+EOF
+ rm -f conftest.nm
+ { ac_try='$gcc_cv_as -mmcu=avrxmega3 conftest.s -o conftest.o'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ { ac_try='$gcc_cv_ld -mavrxmega3 conftest.o -o conftest.elf'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ { ac_try='$gcc_cv_nm conftest.elf > conftest.nm'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ if test -s conftest.nm
+ then
+ if grep ' R xxvaryy' conftest.nm > /dev/null; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+$as_echo "#define HAVE_LD_AVR_AVRXMEGA3_RODATA_IN_FLASH 1" >>confdefs.h
+
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no: avrxmega3 .rodata located in RAM" >&5
+$as_echo "no: avrxmega3 .rodata located in RAM" >&6; }
+ echo "$as_me: nm output was" >&5
+ cat conftest.nm >&5
+ avr_ld_ver="`$gcc_cv_ld -v | sed -e 's:^.* ::'`"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: support for avrxmega3 .rodata in flash needs Binutils 2.29 or higher (have $avr_ld_ver)" >&5
+$as_echo "$as_me: WARNING: support for avrxmega3 .rodata in flash needs Binutils 2.29 or higher (have $avr_ld_ver)" >&2;}
+ fi
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: test failed" >&5
+$as_echo "test failed" >&6; }
+ echo "$as_me: failed program was" >&5
+ cat conftest.s >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: see \`config.log' for details" >&5
+$as_echo "$as_me: WARNING: see \`config.log' for details" >&2;}
+ fi
+ rm -f conftest.s conftest.o conftest.elf conftest.nm
+ ;;
+
+ cris-*-*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for -no-mul-bug-abort option" >&5
+$as_echo_n "checking assembler for -no-mul-bug-abort option... " >&6; }
+if ${gcc_cv_as_cris_no_mul_bug+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_cris_no_mul_bug=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.text' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -no-mul-bug-abort -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_cris_no_mul_bug=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_cris_no_mul_bug" >&5
+$as_echo "$gcc_cv_as_cris_no_mul_bug" >&6; }
+if test $gcc_cv_as_cris_no_mul_bug = yes; then
+
+$as_echo "#define HAVE_AS_NO_MUL_BUG_ABORT_OPTION 1" >>confdefs.h
+
+fi
+
+ ;;
+
+ sparc*-*-*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for -relax option" >&5
+$as_echo_n "checking assembler for -relax option... " >&6; }
+if ${gcc_cv_as_sparc_relax+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_sparc_relax=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.text' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -relax -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_sparc_relax=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_sparc_relax" >&5
+$as_echo "$gcc_cv_as_sparc_relax" >&6; }
+if test $gcc_cv_as_sparc_relax = yes; then
+
+$as_echo "#define HAVE_AS_RELAX_OPTION 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for GOTDATA_OP relocs" >&5
+$as_echo_n "checking assembler for GOTDATA_OP relocs... " >&6; }
+if ${gcc_cv_as_sparc_gotdata_op+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_sparc_gotdata_op=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.text
+.align 4
+foo:
+ nop
+bar:
+ sethi %gdop_hix22(foo), %g1
+ xor %g1, %gdop_lox10(foo), %g1
+ ld [%l7 + %g1], %g2, %gdop(foo)' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -K PIC -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ if test x$gcc_cv_ld != x \
+ && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1; then
+ if test x$gcc_cv_objdump != x; then
+ if $gcc_cv_objdump -s -j .text conftest 2> /dev/null \
+ | grep ' 03000004 82186004 c405c001'> /dev/null 2>&1; then
+ gcc_cv_as_sparc_gotdata_op=no
+ else
+ gcc_cv_as_sparc_gotdata_op=yes
+ fi
+ fi
+ fi
+ rm -f conftest
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_sparc_gotdata_op" >&5
+$as_echo "$gcc_cv_as_sparc_gotdata_op" >&6; }
+if test $gcc_cv_as_sparc_gotdata_op = yes; then
+
+$as_echo "#define HAVE_AS_SPARC_GOTDATA_OP 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for unaligned pcrel relocs" >&5
+$as_echo_n "checking assembler for unaligned pcrel relocs... " >&6; }
+if ${gcc_cv_as_sparc_ua_pcrel+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_sparc_ua_pcrel=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.text
+foo:
+ nop
+.data
+.align 4
+.byte 0
+.uaword %r_disp32(foo)' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -K PIC -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ if test x$gcc_cv_ld != x \
+ && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1; then
+ gcc_cv_as_sparc_ua_pcrel=yes
+ fi
+ rm -f conftest
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_sparc_ua_pcrel" >&5
+$as_echo "$gcc_cv_as_sparc_ua_pcrel" >&6; }
+if test $gcc_cv_as_sparc_ua_pcrel = yes; then
+
+$as_echo "#define HAVE_AS_SPARC_UA_PCREL 1" >>confdefs.h
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for unaligned pcrel relocs against hidden symbols" >&5
+$as_echo_n "checking assembler for unaligned pcrel relocs against hidden symbols... " >&6; }
+if ${gcc_cv_as_sparc_ua_pcrel_hidden+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_sparc_ua_pcrel_hidden=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.data
+.align 4
+.byte 0x31
+.uaword %r_disp32(foo)
+.byte 0x32, 0x33, 0x34
+.global foo
+.hidden foo
+foo:
+.skip 4' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -K PIC -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ if test x$gcc_cv_ld != x && test x$gcc_cv_objdump != x \
+ && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1 \
+ && $gcc_cv_objdump -s -j .data conftest 2> /dev/null \
+ | grep ' 31000000 07323334' > /dev/null 2>&1; then
+ if $gcc_cv_objdump -R conftest 2> /dev/null \
+ | grep 'DISP32' > /dev/null 2>&1; then
+ :
+ else
+ gcc_cv_as_sparc_ua_pcrel_hidden=yes
+ fi
+ fi
+ rm -f conftest
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_sparc_ua_pcrel_hidden" >&5
+$as_echo "$gcc_cv_as_sparc_ua_pcrel_hidden" >&6; }
+if test $gcc_cv_as_sparc_ua_pcrel_hidden = yes; then
+
+$as_echo "#define HAVE_AS_SPARC_UA_PCREL_HIDDEN 1" >>confdefs.h
+
+fi
+
+
+fi
+ # unaligned pcrel relocs
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for offsetable %lo()" >&5
+$as_echo_n "checking assembler for offsetable %lo()... " >&6; }
+if ${gcc_cv_as_sparc_offsetable_lo10+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_sparc_offsetable_lo10=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.text
+ or %g1, %lo(ab) + 12, %g1
+ or %g1, %lo(ab + 12), %g1' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -xarch=v9 -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ if test x$gcc_cv_objdump != x \
+ && $gcc_cv_objdump -s -j .text conftest.o 2> /dev/null \
+ | grep ' 82106000 82106000' > /dev/null 2>&1; then
+ gcc_cv_as_sparc_offsetable_lo10=yes
+ fi
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_sparc_offsetable_lo10" >&5
+$as_echo "$gcc_cv_as_sparc_offsetable_lo10" >&6; }
+if test $gcc_cv_as_sparc_offsetable_lo10 = yes; then
+
+$as_echo "#define HAVE_AS_OFFSETABLE_LO10 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for FMAF, HPC, and VIS 3.0 instructions" >&5
+$as_echo_n "checking assembler for FMAF, HPC, and VIS 3.0 instructions... " >&6; }
+if ${gcc_cv_as_sparc_fmaf+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_sparc_fmaf=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.text
+ .register %g2, #scratch
+ .register %g3, #scratch
+ .align 4
+ fmaddd %f0, %f2, %f4, %f6
+ addxccc %g1, %g2, %g3
+ fsrl32 %f2, %f4, %f8
+ fnaddd %f10, %f12, %f14' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -xarch=v9d -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_sparc_fmaf=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_sparc_fmaf" >&5
+$as_echo "$gcc_cv_as_sparc_fmaf" >&6; }
+if test $gcc_cv_as_sparc_fmaf = yes; then
+
+$as_echo "#define HAVE_AS_FMAF_HPC_VIS3 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for SPARC4 instructions" >&5
+$as_echo_n "checking assembler for SPARC4 instructions... " >&6; }
+if ${gcc_cv_as_sparc_sparc4+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_sparc_sparc4=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.text
+ .register %g2, #scratch
+ .register %g3, #scratch
+ .align 4
+ cxbe %g2, %g3, 1f
+1: cwbneg %g2, %g3, 1f
+1: sha1
+ md5
+ aes_kexpand0 %f4, %f6, %f8
+ des_round %f38, %f40, %f42, %f44
+ camellia_f %f54, %f56, %f58, %f60
+ kasumi_fi_xor %f46, %f48, %f50, %f52' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -xarch=sparc4 -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_sparc_sparc4=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_sparc_sparc4" >&5
+$as_echo "$gcc_cv_as_sparc_sparc4" >&6; }
+if test $gcc_cv_as_sparc_sparc4 = yes; then
+
+$as_echo "#define HAVE_AS_SPARC4 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for SPARC5 and VIS 4.0 instructions" >&5
+$as_echo_n "checking assembler for SPARC5 and VIS 4.0 instructions... " >&6; }
+if ${gcc_cv_as_sparc_sparc5+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_sparc_sparc5=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.text
+ .register %g2, #scratch
+ .register %g3, #scratch
+ .align 4
+ subxc %g1, %g2, %g3
+ fpadd8 %f0, %f2, %f4' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -xarch=sparc5 -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_sparc_sparc5=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_sparc_sparc5" >&5
+$as_echo "$gcc_cv_as_sparc_sparc5" >&6; }
+if test $gcc_cv_as_sparc_sparc5 = yes; then
+
+$as_echo "#define HAVE_AS_SPARC5_VIS4 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for SPARC6 instructions" >&5
+$as_echo_n "checking assembler for SPARC6 instructions... " >&6; }
+if ${gcc_cv_as_sparc_sparc6+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_sparc_sparc6=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.text
+ .register %g2, #scratch
+ .register %g3, #scratch
+ .align 4
+ rd %entropy, %g1
+ fpsll64x %f0, %f2, %f4' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -xarch=sparc6 -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_sparc_sparc6=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_sparc_sparc6" >&5
+$as_echo "$gcc_cv_as_sparc_sparc6" >&6; }
+if test $gcc_cv_as_sparc_sparc6 = yes; then
+
+$as_echo "#define HAVE_AS_SPARC6 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for LEON instructions" >&5
+$as_echo_n "checking assembler for LEON instructions... " >&6; }
+if ${gcc_cv_as_sparc_leon+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_sparc_leon=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.text
+ .register %g2, #scratch
+ .register %g3, #scratch
+ .align 4
+ smac %g2, %g3, %g1
+ umac %g2, %g3, %g1
+ casa [%g2] 0xb, %g3, %g1' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -Aleon -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_sparc_leon=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_sparc_leon" >&5
+$as_echo "$gcc_cv_as_sparc_leon" >&6; }
+if test $gcc_cv_as_sparc_leon = yes; then
+
+$as_echo "#define HAVE_AS_LEON 1" >>confdefs.h
+
+fi
+
+ ;;
+
+ i[34567]86-*-* | x86_64-*-*)
+ case $target_os in
+ cygwin*)
+ # Full C++ conformance when using a shared libstdc++-v3 requires some
+ # support from the Cygwin DLL, which in more recent versions exports
+ # wrappers to aid in interposing and redirecting operators new, delete,
+ # etc., as per n2800 #17.6.4.6 [replacement.functions]. Check if we
+ # are configuring for a version of Cygwin that exports the wrappers.
+ if test x$host = x$target && test x$host_cpu = xi686; then
+ ac_fn_cxx_check_func "$LINENO" "__wrap__Znaj" "ac_cv_func___wrap__Znaj"
+if test "x$ac_cv_func___wrap__Znaj" = xyes; then :
+ gcc_ac_cygwin_dll_wrappers=yes
+else
+ gcc_ac_cygwin_dll_wrappers=no
+fi
+
+ else
+ # Can't check presence of libc functions during cross-compile, so
+ # we just have to assume we're building for an up-to-date target.
+ gcc_ac_cygwin_dll_wrappers=yes
+ fi
+
+cat >>confdefs.h <<_ACEOF
+#define USE_CYGWIN_LIBSTDCXX_WRAPPERS `if test $gcc_ac_cygwin_dll_wrappers = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+ esac
+ case $target_os in
+ cygwin* | pe | mingw32*)
+ # Recent binutils allows the three-operand form of ".comm" on PE. This
+ # definition is used unconditionally to initialise the default state of
+ # the target option variable that governs usage of the feature.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .comm with alignment" >&5
+$as_echo_n "checking assembler for .comm with alignment... " >&6; }
+if ${gcc_cv_as_comm_has_align+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_comm_has_align=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.comm foo,1,32' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_comm_has_align=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_comm_has_align" >&5
+$as_echo "$gcc_cv_as_comm_has_align" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_GAS_ALIGNED_COMM `if test $gcc_cv_as_comm_has_align = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+ # Used for DWARF 2 in PE
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .secrel32 relocs" >&5
+$as_echo_n "checking assembler for .secrel32 relocs... " >&6; }
+if ${gcc_cv_as_ix86_pe_secrel32+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_pe_secrel32=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.text
+foo: nop
+.data
+ .secrel32 foo' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ if test x$gcc_cv_ld != x \
+ && $gcc_cv_ld -o conftest conftest.o > /dev/null 2>&1; then
+ gcc_cv_as_ix86_pe_secrel32=yes
+ fi
+ rm -f conftest
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_pe_secrel32" >&5
+$as_echo "$gcc_cv_as_ix86_pe_secrel32" >&6; }
+if test $gcc_cv_as_ix86_pe_secrel32 = yes; then
+
+$as_echo "#define HAVE_GAS_PE_SECREL32_RELOC 1" >>confdefs.h
+
+fi
+
+ # Test if the assembler supports the extended form of the .section
+ # directive that specifies section alignment. LTO support uses this,
+ # but normally only after installation, so we warn but don't fail the
+ # configure if LTO is enabled but the assembler does not support it.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .section with alignment" >&5
+$as_echo_n "checking assembler for .section with alignment... " >&6; }
+if ${gcc_cv_as_section_has_align+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_section_has_align=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.section lto_test,"dr0"' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -fatal-warnings -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_section_has_align=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_section_has_align" >&5
+$as_echo "$gcc_cv_as_section_has_align" >&6; }
+
+
+ if test x$gcc_cv_as_section_has_align != xyes; then
+ case ",$enable_languages," in
+ *,lto,*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: LTO for $target requires binutils >= 2.20.1, but version found appears insufficient; LTO will not work until binutils is upgraded." >&5
+$as_echo "$as_me: WARNING: LTO for $target requires binutils >= 2.20.1, but version found appears insufficient; LTO will not work until binutils is upgraded." >&2;}
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ case $target_os in
+ darwin2* | darwin19*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for llvm assembler x86-pad-for-align option" >&5
+$as_echo_n "checking assembler for llvm assembler x86-pad-for-align option... " >&6; }
+if ${gcc_cv_as_mllvm_x86_pad_for_align+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_mllvm_x86_pad_for_align=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.text' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -mllvm -x86-pad-for-align=false -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_mllvm_x86_pad_for_align=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_mllvm_x86_pad_for_align" >&5
+$as_echo "$gcc_cv_as_mllvm_x86_pad_for_align" >&6; }
+if test $gcc_cv_as_mllvm_x86_pad_for_align = yes; then
+
+$as_echo "#define HAVE_AS_MLLVM_X86_PAD_FOR_ALIGN 1" >>confdefs.h
+
+fi
+
+ ;;
+ esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for -xbrace_comment" >&5
+$as_echo_n "checking assembler for -xbrace_comment... " >&6; }
+if ${gcc_cv_as_ix86_xbrace_comment+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_xbrace_comment=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.text' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -xbrace_comment=no -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_ix86_xbrace_comment=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_xbrace_comment" >&5
+$as_echo "$gcc_cv_as_ix86_xbrace_comment" >&6; }
+if test $gcc_cv_as_ix86_xbrace_comment = yes; then
+
+$as_echo "#define HAVE_AS_XBRACE_COMMENT_OPTION 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for filds and fists mnemonics" >&5
+$as_echo_n "checking assembler for filds and fists mnemonics... " >&6; }
+if ${gcc_cv_as_ix86_filds+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_filds=no
+ if test x$gcc_cv_as != x; then
+ $as_echo 'filds (%ebp); fists (%ebp)' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_ix86_filds=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_filds" >&5
+$as_echo "$gcc_cv_as_ix86_filds" >&6; }
+if test $gcc_cv_as_ix86_filds = yes; then
+
+$as_echo "#define HAVE_AS_IX86_FILDS 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for fildq and fistpq mnemonics" >&5
+$as_echo_n "checking assembler for fildq and fistpq mnemonics... " >&6; }
+if ${gcc_cv_as_ix86_fildq+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_fildq=no
+ if test x$gcc_cv_as != x; then
+ $as_echo 'fildq (%ebp); fistpq (%ebp)' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_ix86_fildq=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_fildq" >&5
+$as_echo "$gcc_cv_as_ix86_fildq" >&6; }
+if test $gcc_cv_as_ix86_fildq = yes; then
+
+$as_echo "#define HAVE_AS_IX86_FILDQ 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for cmov syntax" >&5
+$as_echo_n "checking assembler for cmov syntax... " >&6; }
+if ${gcc_cv_as_ix86_cmov_sun_syntax+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_cmov_sun_syntax=no
+ if test x$gcc_cv_as != x; then
+ $as_echo 'cmovl.l %edx, %eax' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_ix86_cmov_sun_syntax=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_cmov_sun_syntax" >&5
+$as_echo "$gcc_cv_as_ix86_cmov_sun_syntax" >&6; }
+if test $gcc_cv_as_ix86_cmov_sun_syntax = yes; then
+
+$as_echo "#define HAVE_AS_IX86_CMOV_SUN_SYNTAX 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for ffreep mnemonic" >&5
+$as_echo_n "checking assembler for ffreep mnemonic... " >&6; }
+if ${gcc_cv_as_ix86_ffreep+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_ffreep=no
+ if test x$gcc_cv_as != x; then
+ $as_echo 'ffreep %st(1)' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_ix86_ffreep=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_ffreep" >&5
+$as_echo "$gcc_cv_as_ix86_ffreep" >&6; }
+if test $gcc_cv_as_ix86_ffreep = yes; then
+
+$as_echo "#define HAVE_AS_IX86_FFREEP 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .quad directive" >&5
+$as_echo_n "checking assembler for .quad directive... " >&6; }
+if ${gcc_cv_as_ix86_quad+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_quad=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.quad 0' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_ix86_quad=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_quad" >&5
+$as_echo "$gcc_cv_as_ix86_quad" >&6; }
+if test $gcc_cv_as_ix86_quad = yes; then
+
+$as_echo "#define HAVE_AS_IX86_QUAD 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for sahf mnemonic" >&5
+$as_echo_n "checking assembler for sahf mnemonic... " >&6; }
+if ${gcc_cv_as_ix86_sahf+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_sahf=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.code64
+ sahf' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_ix86_sahf=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_sahf" >&5
+$as_echo "$gcc_cv_as_ix86_sahf" >&6; }
+if test $gcc_cv_as_ix86_sahf = yes; then
+
+$as_echo "#define HAVE_AS_IX86_SAHF 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for interunit movq mnemonic" >&5
+$as_echo_n "checking assembler for interunit movq mnemonic... " >&6; }
+if ${gcc_cv_as_ix86_interunit_movq+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_interunit_movq=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.code64
+ movq %mm0, %rax
+ movq %rax, %xmm0' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_ix86_interunit_movq=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_interunit_movq" >&5
+$as_echo "$gcc_cv_as_ix86_interunit_movq" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_AS_IX86_INTERUNIT_MOVQ `if test $gcc_cv_as_ix86_interunit_movq = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for hle prefixes" >&5
+$as_echo_n "checking assembler for hle prefixes... " >&6; }
+if ${gcc_cv_as_ix86_hle+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_hle=no
+ if test x$gcc_cv_as != x; then
+ $as_echo 'lock xacquire cmpxchg %esi, (%ecx)' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_ix86_hle=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_hle" >&5
+$as_echo "$gcc_cv_as_ix86_hle" >&6; }
+if test $gcc_cv_as_ix86_hle = yes; then
+
+$as_echo "#define HAVE_AS_IX86_HLE 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for swap suffix" >&5
+$as_echo_n "checking assembler for swap suffix... " >&6; }
+if ${gcc_cv_as_ix86_swap+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_swap=no
+ if test x$gcc_cv_as != x; then
+ $as_echo 'movl.s %esp, %ebp' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_ix86_swap=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_swap" >&5
+$as_echo "$gcc_cv_as_ix86_swap" >&6; }
+if test $gcc_cv_as_ix86_swap = yes; then
+
+$as_echo "#define HAVE_AS_IX86_SWAP 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for different section symbol subtraction" >&5
+$as_echo_n "checking assembler for different section symbol subtraction... " >&6; }
+if ${gcc_cv_as_ix86_diff_sect_delta+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_diff_sect_delta=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.section .rodata
+.L1:
+ .long .L2-.L1
+ .long .L3-.L1
+ .text
+.L3: nop
+.L2: nop' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_ix86_diff_sect_delta=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_diff_sect_delta" >&5
+$as_echo "$gcc_cv_as_ix86_diff_sect_delta" >&6; }
+if test $gcc_cv_as_ix86_diff_sect_delta = yes; then
+
+$as_echo "#define HAVE_AS_IX86_DIFF_SECT_DELTA 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for rep and lock prefix" >&5
+$as_echo_n "checking assembler for rep and lock prefix... " >&6; }
+if ${gcc_cv_as_ix86_rep_lock_prefix+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_rep_lock_prefix=no
+ if test x$gcc_cv_as != x; then
+ $as_echo 'rep movsl
+ rep ret
+ rep nop
+ rep bsf %ecx, %eax
+ rep bsr %ecx, %eax
+ lock addl %edi, (%eax,%esi)
+ lock orl $0, (%esp)' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_ix86_rep_lock_prefix=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_rep_lock_prefix" >&5
+$as_echo "$gcc_cv_as_ix86_rep_lock_prefix" >&6; }
+if test $gcc_cv_as_ix86_rep_lock_prefix = yes; then
+
+$as_echo "#define HAVE_AS_IX86_REP_LOCK_PREFIX 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for ud2 mnemonic" >&5
+$as_echo_n "checking assembler for ud2 mnemonic... " >&6; }
+if ${gcc_cv_as_ix86_ud2+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_ud2=no
+ if test x$gcc_cv_as != x; then
+ $as_echo 'ud2' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_ix86_ud2=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_ud2" >&5
+$as_echo "$gcc_cv_as_ix86_ud2" >&6; }
+if test $gcc_cv_as_ix86_ud2 = yes; then
+
+$as_echo "#define HAVE_AS_IX86_UD2 1" >>confdefs.h
+
+fi
+
+
+ # Enforce 32-bit output with gas and gld.
+ if test x$gas = xyes; then
+ as_ix86_gas_32_opt="--32"
+ fi
+ if echo "$ld_ver" | grep GNU > /dev/null; then
+ if $gcc_cv_ld -V 2>/dev/null | grep elf_i386_sol2 > /dev/null; then
+ ld_ix86_gld_32_opt="-melf_i386_sol2"
+ else
+ ld_ix86_gld_32_opt="-melf_i386"
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for R_386_TLS_GD_PLT reloc" >&5
+$as_echo_n "checking assembler for R_386_TLS_GD_PLT reloc... " >&6; }
+if ${gcc_cv_as_ix86_tlsgdplt+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_tlsgdplt=no
+ if test x$gcc_cv_as != x; then
+ $as_echo 'call tls_gd@tlsgdplt' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags $as_ix86_gas_32_opt -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ if test x$gcc_cv_ld != x \
+ && $gcc_cv_ld $ld_ix86_gld_32_opt -o conftest conftest.o -G > /dev/null 2>&1; then
+ gcc_cv_as_ix86_tlsgdplt=yes
+ fi
+ rm -f conftest
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_tlsgdplt" >&5
+$as_echo "$gcc_cv_as_ix86_tlsgdplt" >&6; }
+if test $gcc_cv_as_ix86_tlsgdplt = yes; then
+
+$as_echo "#define HAVE_AS_IX86_TLSGDPLT 1" >>confdefs.h
+
+fi
+
+
+ conftest_s='
+ .section .tdata,"aw'$tls_section_flag'",@progbits
+tls_ld:
+ .section .text,"ax",@progbits
+ call tls_ld@tlsldmplt'
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for R_386_TLS_LDM_PLT reloc" >&5
+$as_echo_n "checking assembler for R_386_TLS_LDM_PLT reloc... " >&6; }
+if ${gcc_cv_as_ix86_tlsldmplt+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_tlsldmplt=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags $as_ix86_gas_32_opt -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ if test x$gcc_cv_ld != x \
+ && $gcc_cv_ld $ld_ix86_gld_32_opt -o conftest conftest.o -G > /dev/null 2>&1; then
+ gcc_cv_as_ix86_tlsldmplt=yes
+ fi
+ rm -f conftest
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_tlsldmplt" >&5
+$as_echo "$gcc_cv_as_ix86_tlsldmplt" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_AS_IX86_TLSLDMPLT `if test $gcc_cv_as_ix86_tlsldmplt = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+
+ conftest_s='
+ .section .text,"ax",@progbits
+ .globl _start
+ .type _start, @function
+_start:
+ leal value@tlsldm(%ebx), %eax
+ call ___tls_get_addr@plt
+
+ .section .tdata,"aw'$tls_section_flag'",@progbits
+ .type value, @object
+value:'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for R_386_TLS_LDM reloc" >&5
+$as_echo_n "checking assembler for R_386_TLS_LDM reloc... " >&6; }
+if ${gcc_cv_as_ix86_tlsldm+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_tlsldm=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags $as_ix86_gas_32_opt -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ if test x$gcc_cv_ld != x && test x$gcc_cv_objdump != x \
+ && $gcc_cv_ld $ld_ix86_gld_32_opt -o conftest conftest.o $ld_tls_libs -lc > /dev/null 2>&1; then
+ if $gcc_cv_objdump -d conftest 2>/dev/null | grep nop > /dev/null \
+ || dis conftest 2>/dev/null | grep nop > /dev/null; then
+ gcc_cv_as_ix86_tlsldm=yes
+ fi
+ fi
+ rm -f conftest
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_tlsldm" >&5
+$as_echo "$gcc_cv_as_ix86_tlsldm" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_AS_IX86_TLSLDM `if test $gcc_cv_as_ix86_tlsldm = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+
+ conftest_s='
+ .data
+bar:
+ .byte 1
+ .text
+ .global _start
+_start:
+ cmpl $0, bar@GOT
+ jmp *_start@GOT'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for R_386_GOT32X reloc" >&5
+$as_echo_n "checking assembler for R_386_GOT32X reloc... " >&6; }
+if ${gcc_cv_as_ix86_got32x+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_got32x=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags $as_ix86_gas_32_opt -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ if test x$gcc_cv_ld != x && test x$gcc_cv_objdump != x \
+ && test x$gcc_cv_readelf != x \
+ && $gcc_cv_readelf --relocs --wide conftest.o 2>&1 \
+ | grep R_386_GOT32X > /dev/null 2>&1 \
+ && $gcc_cv_ld $ld_ix86_gld_32_opt -o conftest conftest.o > /dev/null 2>&1; then
+ if $gcc_cv_objdump -dw conftest 2>&1 \
+ | grep 0xffffff > /dev/null 2>&1; then
+ gcc_cv_as_ix86_got32x=no
+ else
+ gcc_cv_as_ix86_got32x=yes
+ fi
+ fi
+ rm -f conftest
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_got32x" >&5
+$as_echo "$gcc_cv_as_ix86_got32x" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_AS_IX86_GOT32X `if test x"$gcc_cv_as_ix86_got32x" = xyes; then echo 1; else echo 0; fi`
+_ACEOF
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for GOTOFF in data" >&5
+$as_echo_n "checking assembler for GOTOFF in data... " >&6; }
+if ${gcc_cv_as_ix86_gotoff_in_data+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_gotoff_in_data=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .text
+.L0:
+ nop
+ .data
+ .long .L0@GOTOFF' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags $as_ix86_gas_32_opt -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_ix86_gotoff_in_data=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_gotoff_in_data" >&5
+$as_echo "$gcc_cv_as_ix86_gotoff_in_data" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_AS_GOTOFF_IN_DATA `if test $gcc_cv_as_ix86_gotoff_in_data = yes; then echo 1; else echo 0; fi`
+_ACEOF
+
+
+ conftest_s='
+ .section .text,"ax",@progbits
+ .globl _start
+ .type _start, @function
+_start:
+ leal ld@tlsldm(%ecx), %eax
+ call *___tls_get_addr@GOT(%ecx)
+ leal gd@tlsgd(%ecx), %eax
+ call *___tls_get_addr@GOT(%ecx)
+
+ .section .tdata,"aw'$tls_section_flag'",@progbits
+ .type ld, @object
+ld:
+ .byte 0
+ .globl gd
+ .type gd, @object
+gd:
+ .byte 0'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for calling ___tls_get_addr via GOT" >&5
+$as_echo_n "checking assembler for calling ___tls_get_addr via GOT... " >&6; }
+if ${gcc_cv_as_ix86_tls_get_addr_via_got+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_tls_get_addr_via_got=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags $as_ix86_gas_32_opt -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ if test x$gcc_cv_ld != x \
+ && $gcc_cv_ld $ld_ix86_gld_32_opt -o conftest conftest.o > /dev/null 2>&1; then
+ gcc_cv_as_ix86_tls_get_addr_via_got=yes
+ fi
+ rm -f conftest
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_tls_get_addr_via_got" >&5
+$as_echo "$gcc_cv_as_ix86_tls_get_addr_via_got" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_AS_IX86_TLS_GET_ADDR_GOT `if test x"$gcc_cv_as_ix86_tls_get_addr_via_got" = xyes; then echo 1; else echo 0; fi`
+_ACEOF
+
+ ;;
+
+ ia64*-*-*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for ltoffx and ldxmov relocs" >&5
+$as_echo_n "checking assembler for ltoffx and ldxmov relocs... " >&6; }
+if ${gcc_cv_as_ia64_ltoffx_ldxmov_relocs+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ia64_ltoffx_ldxmov_relocs=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .text
+ addl r15 = @ltoffx(x#), gp
+ ;;
+ ld8.mov r16 = [r15], x#
+' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_ia64_ltoffx_ldxmov_relocs=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ia64_ltoffx_ldxmov_relocs" >&5
+$as_echo "$gcc_cv_as_ia64_ltoffx_ldxmov_relocs" >&6; }
+if test $gcc_cv_as_ia64_ltoffx_ldxmov_relocs = yes; then
+
+$as_echo "#define HAVE_AS_LTOFFX_LDXMOV_RELOCS 1" >>confdefs.h
+
+fi
+
+
+ ;;
+
+ powerpc*-*-*)
+
+ case $target in
+ *-*-darwin*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .machine directive support" >&5
+$as_echo_n "checking assembler for .machine directive support... " >&6; }
+if ${gcc_cv_as_machine_directive+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_machine_directive=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .machine ppc7400' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_machine_directive=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_machine_directive" >&5
+$as_echo "$gcc_cv_as_machine_directive" >&6; }
+
+
+ if test x$gcc_cv_as_machine_directive != xyes; then
+ echo "*** This target requires an assembler supporting \".machine\"" >&2
+ echo you can get it from: https://gcc.gnu.org/pub/gcc/infrastructure/cctools-528.5.dmg >&2
+ test x$build = x$target && exit 1
+ fi
+ ;;
+ esac
+
+ case $target in
+ *-*-aix*) conftest_s=' .machine "pwr5"
+ .csect .text[PR]
+ mfcr 3,128';;
+ *-*-darwin*) conftest_s=' .text
+ mfcr r3,128';;
+ *) conftest_s=' .machine power4
+ .text
+ mfcr 3,128';;
+ esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for mfcr field support" >&5
+$as_echo_n "checking assembler for mfcr field support... " >&6; }
+if ${gcc_cv_as_powerpc_mfcrf+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_powerpc_mfcrf=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_powerpc_mfcrf=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_powerpc_mfcrf" >&5
+$as_echo "$gcc_cv_as_powerpc_mfcrf" >&6; }
+if test $gcc_cv_as_powerpc_mfcrf = yes; then
+
+$as_echo "#define HAVE_AS_MFCRF 1" >>confdefs.h
+
+fi
+
+
+ case $target in
+ *-*-aix*) conftest_s=' .csect .text[PR]
+LCF..0:
+ addis 11,30,_GLOBAL_OFFSET_TABLE_-LCF..0@ha';;
+ *-*-darwin*)
+ conftest_s=' .text
+LCF0:
+ addis r11,r30,_GLOBAL_OFFSET_TABLE_-LCF0@ha';;
+ *) conftest_s=' .text
+.LCF0:
+ addis 11,30,_GLOBAL_OFFSET_TABLE_-.LCF0@ha';;
+ esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for rel16 relocs" >&5
+$as_echo_n "checking assembler for rel16 relocs... " >&6; }
+if ${gcc_cv_as_powerpc_rel16+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_powerpc_rel16=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -a32 -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_powerpc_rel16=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_powerpc_rel16" >&5
+$as_echo "$gcc_cv_as_powerpc_rel16" >&6; }
+if test $gcc_cv_as_powerpc_rel16 = yes; then
+
+$as_echo "#define HAVE_AS_REL16 1" >>confdefs.h
+
+fi
+
+
+ case $target in
+ *-*-aix*) conftest_s=' .machine "pwr7"
+ .csect .text[PR]
+ lxvd2x 1,2,3';;
+ *) conftest_s=' .machine power7
+ .text
+ lxvd2x 1,2,3';;
+ esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for vector-scalar support" >&5
+$as_echo_n "checking assembler for vector-scalar support... " >&6; }
+if ${gcc_cv_as_powerpc_vsx+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_powerpc_vsx=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -a32 -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_powerpc_vsx=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_powerpc_vsx" >&5
+$as_echo "$gcc_cv_as_powerpc_vsx" >&6; }
+if test $gcc_cv_as_powerpc_vsx = yes; then
+
+$as_echo "#define HAVE_AS_VSX 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .gnu_attribute support" >&5
+$as_echo_n "checking assembler for .gnu_attribute support... " >&6; }
+if ${gcc_cv_as_powerpc_gnu_attribute+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_powerpc_gnu_attribute=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.gnu_attribute 4,1' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_powerpc_gnu_attribute=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_powerpc_gnu_attribute" >&5
+$as_echo "$gcc_cv_as_powerpc_gnu_attribute" >&6; }
+if test $gcc_cv_as_powerpc_gnu_attribute = yes; then
+
+$as_echo "#define HAVE_AS_GNU_ATTRIBUTE 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for prologue entry point marker support" >&5
+$as_echo_n "checking assembler for prologue entry point marker support... " >&6; }
+if ${gcc_cv_as_powerpc_entry_markers+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_powerpc_entry_markers=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .reloc .,R_PPC64_ENTRY; nop' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -a64 --fatal-warnings -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_powerpc_entry_markers=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_powerpc_entry_markers" >&5
+$as_echo "$gcc_cv_as_powerpc_entry_markers" >&6; }
+if test $gcc_cv_as_powerpc_entry_markers = yes; then
+
+$as_echo "#define HAVE_AS_ENTRY_MARKERS 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for plt sequence marker support" >&5
+$as_echo_n "checking assembler for plt sequence marker support... " >&6; }
+if ${gcc_cv_as_powerpc_pltseq_markers+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_powerpc_pltseq_markers=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .reloc .,R_PPC_PLTSEQ; nop' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -a32 --fatal-warnings -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_powerpc_pltseq_markers=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_powerpc_pltseq_markers" >&5
+$as_echo "$gcc_cv_as_powerpc_pltseq_markers" >&6; }
+if test $gcc_cv_as_powerpc_pltseq_markers = yes; then
+
+$as_echo "#define HAVE_AS_PLTSEQ 1" >>confdefs.h
+
+fi
+
+
+ case $target in
+ *-*-aix*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for AIX .ref support" >&5
+$as_echo_n "checking assembler for AIX .ref support... " >&6; }
+if ${gcc_cv_as_aix_ref+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_aix_ref=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .csect stuff[rw]
+ stuff:
+ .long 1
+ .extern sym
+ .ref sym
+ ' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_aix_ref=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_aix_ref" >&5
+$as_echo "$gcc_cv_as_aix_ref" >&6; }
+if test $gcc_cv_as_aix_ref = yes; then
+
+$as_echo "#define HAVE_AS_REF 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for AIX DWARF location lists section support" >&5
+$as_echo_n "checking assembler for AIX DWARF location lists section support... " >&6; }
+if ${gcc_cv_as_aix_dwloc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_aix_dwloc=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .dwsect 0xA0000
+ Lframe..0:
+ .vbyte 4,Lframe..0
+ ' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_aix_dwloc=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_aix_dwloc" >&5
+$as_echo "$gcc_cv_as_aix_dwloc" >&6; }
+if test $gcc_cv_as_aix_dwloc = yes; then
+
+$as_echo "#define HAVE_XCOFF_DWARF_EXTRAS 1" >>confdefs.h
+
+fi
+
+ ;;
+ esac
+ ;;
+
+ mips*-*-*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for explicit relocation support" >&5
+$as_echo_n "checking assembler for explicit relocation support... " >&6; }
+if ${gcc_cv_as_mips_explicit_relocs+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_mips_explicit_relocs=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' lw $4,%gp_rel(foo)($4)' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_mips_explicit_relocs=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_mips_explicit_relocs" >&5
+$as_echo "$gcc_cv_as_mips_explicit_relocs" >&6; }
+if test $gcc_cv_as_mips_explicit_relocs = yes; then
+ if test x$target_cpu_default = x
+ then target_cpu_default=MASK_EXPLICIT_RELOCS
+ else target_cpu_default="($target_cpu_default)|MASK_EXPLICIT_RELOCS"
+ fi
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for -mno-shared support" >&5
+$as_echo_n "checking assembler for -mno-shared support... " >&6; }
+if ${gcc_cv_as_mips_no_shared+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_mips_no_shared=no
+ if test x$gcc_cv_as != x; then
+ $as_echo 'nop' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -mno-shared -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_mips_no_shared=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_mips_no_shared" >&5
+$as_echo "$gcc_cv_as_mips_no_shared" >&6; }
+if test $gcc_cv_as_mips_no_shared = yes; then
+
+$as_echo "#define HAVE_AS_NO_SHARED 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .gnu_attribute support" >&5
+$as_echo_n "checking assembler for .gnu_attribute support... " >&6; }
+if ${gcc_cv_as_mips_gnu_attribute+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_mips_gnu_attribute=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.gnu_attribute 4,1' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_mips_gnu_attribute=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_mips_gnu_attribute" >&5
+$as_echo "$gcc_cv_as_mips_gnu_attribute" >&6; }
+if test $gcc_cv_as_mips_gnu_attribute = yes; then
+
+$as_echo "#define HAVE_AS_GNU_ATTRIBUTE 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .module support" >&5
+$as_echo_n "checking assembler for .module support... " >&6; }
+if ${gcc_cv_as_mips_dot_module+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_mips_dot_module=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.module mips2
+ .module fp=xx' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -32 -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_mips_dot_module=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_mips_dot_module" >&5
+$as_echo "$gcc_cv_as_mips_dot_module" >&6; }
+if test $gcc_cv_as_mips_dot_module = yes; then
+
+$as_echo "#define HAVE_AS_DOT_MODULE 1" >>confdefs.h
+
+fi
+
+ if test x$gcc_cv_as_mips_dot_module = xno \
+ && test x$with_fp_32 != x; then
+ as_fn_error $? "Requesting --with-fp-32= requires assembler support for .module." "$LINENO" 5
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .micromips support" >&5
+$as_echo_n "checking assembler for .micromips support... " >&6; }
+if ${gcc_cv_as_micromips_support+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_micromips_support=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.set micromips' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags --fatal-warnings -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_micromips_support=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_micromips_support" >&5
+$as_echo "$gcc_cv_as_micromips_support" >&6; }
+if test $gcc_cv_as_micromips_support = yes; then
+
+$as_echo "#define HAVE_GAS_MICROMIPS 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .dtprelword support" >&5
+$as_echo_n "checking assembler for .dtprelword support... " >&6; }
+if ${gcc_cv_as_mips_dtprelword+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_mips_dtprelword=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.section .tdata,"awT",@progbits
+x:
+ .word 2
+ .text
+ .dtprelword x+0x8000' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_mips_dtprelword=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_mips_dtprelword" >&5
+$as_echo "$gcc_cv_as_mips_dtprelword" >&6; }
+if test $gcc_cv_as_mips_dtprelword = yes; then
+
+$as_echo "#define HAVE_AS_DTPRELWORD 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for DSPR1 mult with four accumulators support" >&5
+$as_echo_n "checking assembler for DSPR1 mult with four accumulators support... " >&6; }
+if ${gcc_cv_as_mips_dspr1_mult+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_mips_dspr1_mult=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .set mips32r2
+ .set nodspr2
+ .set dsp
+ madd $ac3,$4,$5
+ maddu $ac3,$4,$5
+ msub $ac3,$4,$5
+ msubu $ac3,$4,$5
+ mult $ac3,$4,$5
+ multu $ac3,$4,$5' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_mips_dspr1_mult=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_mips_dspr1_mult" >&5
+$as_echo "$gcc_cv_as_mips_dspr1_mult" >&6; }
+if test $gcc_cv_as_mips_dspr1_mult = yes; then
+
+$as_echo "#define HAVE_AS_DSPR1_MULT 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler and linker for explicit JALR relocation" >&5
+$as_echo_n "checking assembler and linker for explicit JALR relocation... " >&6; }
+ gcc_cv_as_ld_jalr_reloc=no
+ if test $gcc_cv_as_mips_explicit_relocs = yes; then
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 20 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_as_ld_jalr_reloc=yes
+ fi
+ elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x -a x$gcc_cv_objdump != x; then
+ echo ' .ent x' > conftest.s
+ echo 'x: lw $2,%got_disp(y)($3)' >> conftest.s
+ echo ' lw $25,%call16(y)($28)' >> conftest.s
+ echo ' .reloc 1f,R_MIPS_JALR,y' >> conftest.s
+ echo '1: jalr $25' >> conftest.s
+ echo ' .reloc 1f,R_MIPS_JALR,x' >> conftest.s
+ echo '1: jalr $25' >> conftest.s
+ echo ' .end x' >> conftest.s
+ if $gcc_cv_as -o conftest.o conftest.s >/dev/null 2>&5 \
+ && $gcc_cv_ld -shared -o conftest.so conftest.o >/dev/null 2>&5; then
+ if $gcc_cv_objdump -d conftest.so | grep jalr >/dev/null 2>&1 \
+ && $gcc_cv_objdump -d conftest.so | grep "bal.*<x>" >/dev/null 2>&1; then
+ gcc_cv_as_ld_jalr_reloc=yes
+ fi
+ fi
+ rm -f conftest.*
+ fi
+ fi
+ if test $gcc_cv_as_ld_jalr_reloc = yes; then
+ if test x$target_cpu_default = x; then
+ target_cpu_default=MASK_RELAX_PIC_CALLS
+ else
+ target_cpu_default="($target_cpu_default)|MASK_RELAX_PIC_CALLS"
+ fi
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ld_jalr_reloc" >&5
+$as_echo "$gcc_cv_as_ld_jalr_reloc" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking linker for .eh_frame personality relaxation" >&5
+$as_echo_n "checking linker for .eh_frame personality relaxation... " >&6; }
+if ${gcc_cv_ld_mips_personality_relaxation+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_ld_mips_personality_relaxation=no
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 \
+ -a "$gcc_cv_gld_minor_version" -ge 21 \
+ -o "$gcc_cv_gld_major_version" -gt 2; then
+ gcc_cv_ld_mips_personality_relaxation=yes
+ fi
+ elif test x$gcc_cv_as != x \
+ -a x$gcc_cv_ld != x \
+ -a x$gcc_cv_readelf != x ; then
+ cat > conftest.s <<EOF
+ .cfi_startproc
+ .cfi_personality 0x80,indirect_ptr
+ .ent test
+test:
+ nop
+ .end test
+ .cfi_endproc
+
+ .section .data,"aw",@progbits
+indirect_ptr:
+ .dc.a personality
+EOF
+ if $gcc_cv_as -KPIC -o conftest.o conftest.s > /dev/null 2>&1 \
+ && $gcc_cv_ld -o conftest conftest.o -shared > /dev/null 2>&1; then
+ if $gcc_cv_readelf -d conftest 2>&1 \
+ | grep TEXTREL > /dev/null 2>&1; then
+ :
+ elif $gcc_cv_readelf --relocs conftest 2>&1 \
+ | grep 'R_MIPS_REL32 *$' > /dev/null 2>&1; then
+ :
+ else
+ gcc_cv_ld_mips_personality_relaxation=yes
+ fi
+ fi
+ fi
+ rm -f conftest.s conftest.o conftest
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_mips_personality_relaxation" >&5
+$as_echo "$gcc_cv_ld_mips_personality_relaxation" >&6; }
+ if test x$gcc_cv_ld_mips_personality_relaxation = xyes; then
+
+$as_echo "#define HAVE_LD_PERSONALITY_RELAXATION 1" >>confdefs.h
+
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for -mnan= support" >&5
+$as_echo_n "checking assembler for -mnan= support... " >&6; }
+if ${gcc_cv_as_mips_nan+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_mips_nan=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -mnan=2008 -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_mips_nan=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_mips_nan" >&5
+$as_echo "$gcc_cv_as_mips_nan" >&6; }
+if test $gcc_cv_as_mips_nan = yes; then
+
+$as_echo "#define HAVE_AS_NAN 1" >>confdefs.h
+
+fi
+
+ if test x$gcc_cv_as_mips_nan = xno \
+ && test x$with_nan != x; then
+ as_fn_error $? "Requesting --with-nan= requires assembler support for -mnan=" "$LINENO" 5
+ fi
+ ;;
+ msp430-*-*)
+ # Earlier GAS versions generically support .gnu_attribute, but the
+ # msp430 assembler will not do anything with it.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .gnu_attribute support" >&5
+$as_echo_n "checking assembler for .gnu_attribute support... " >&6; }
+if ${gcc_cv_as_msp430_gnu_attribute+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_msp430_gnu_attribute=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.gnu_attribute 4,1' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_msp430_gnu_attribute=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_msp430_gnu_attribute" >&5
+$as_echo "$gcc_cv_as_msp430_gnu_attribute" >&6; }
+if test $gcc_cv_as_msp430_gnu_attribute = yes; then
+
+$as_echo "#define HAVE_AS_GNU_ATTRIBUTE 1" >>confdefs.h
+
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .mspabi_attribute support" >&5
+$as_echo_n "checking assembler for .mspabi_attribute support... " >&6; }
+if ${gcc_cv_as_msp430_mspabi_attribute+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_msp430_mspabi_attribute=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.mspabi_attribute 4,2' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_msp430_mspabi_attribute=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_msp430_mspabi_attribute" >&5
+$as_echo "$gcc_cv_as_msp430_mspabi_attribute" >&6; }
+if test $gcc_cv_as_msp430_mspabi_attribute = yes; then
+
+$as_echo "#define HAVE_AS_MSPABI_ATTRIBUTE 1" >>confdefs.h
+
+fi
+
+ if test x$enable_newlib_nano_formatted_io = xyes; then
+
+$as_echo "#define HAVE_NEWLIB_NANO_FORMATTED_IO 1" >>confdefs.h
+
+ fi
+ ;;
+ nios2-*-*)
+ # Versions 2.33 and earlier lacked support for the %gotoff relocation
+ # syntax that is documented in the ABI specification.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for support for %gotoff relocations in constant data" >&5
+$as_echo_n "checking assembler for support for %gotoff relocations in constant data... " >&6; }
+if ${gcc_cv_as_nios2_gotoff_relocation+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_nios2_gotoff_relocation=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .extern foo
+ .data
+ .long %gotoff(foo)' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_nios2_gotoff_relocation=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_nios2_gotoff_relocation" >&5
+$as_echo "$gcc_cv_as_nios2_gotoff_relocation" >&6; }
+if test $gcc_cv_as_nios2_gotoff_relocation = yes; then
+
+$as_echo "#define HAVE_AS_NIOS2_GOTOFF_RELOCATION 1" >>confdefs.h
+
+fi
+
+ ;;
+ riscv*-*-*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .attribute support" >&5
+$as_echo_n "checking assembler for .attribute support... " >&6; }
+if ${gcc_cv_as_riscv_attribute+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_riscv_attribute=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.attribute stack_align,4' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_riscv_attribute=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_riscv_attribute" >&5
+$as_echo "$gcc_cv_as_riscv_attribute" >&6; }
+if test $gcc_cv_as_riscv_attribute = yes; then
+
+$as_echo "#define HAVE_AS_RISCV_ATTRIBUTE 1" >>confdefs.h
+
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for -misa-spec= support" >&5
+$as_echo_n "checking assembler for -misa-spec= support... " >&6; }
+if ${gcc_cv_as_riscv_isa_spec+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_riscv_isa_spec=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -misa-spec=2.2 -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_riscv_isa_spec=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_riscv_isa_spec" >&5
+$as_echo "$gcc_cv_as_riscv_isa_spec" >&6; }
+if test $gcc_cv_as_riscv_isa_spec = yes; then
+
+$as_echo "#define HAVE_AS_MISA_SPEC 1" >>confdefs.h
+
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for -march=rv32i_zifencei support" >&5
+$as_echo_n "checking assembler for -march=rv32i_zifencei support... " >&6; }
+if ${gcc_cv_as_riscv_march_zifencei+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_riscv_march_zifencei=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -march=rv32i_zifencei2p0 -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_riscv_march_zifencei=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_riscv_march_zifencei" >&5
+$as_echo "$gcc_cv_as_riscv_march_zifencei" >&6; }
+if test $gcc_cv_as_riscv_march_zifencei = yes; then
+
+$as_echo "#define HAVE_AS_MARCH_ZIFENCEI 1" >>confdefs.h
+
+fi
+
+ ;;
+ loongarch*-*-*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .dtprelword support" >&5
+$as_echo_n "checking assembler for .dtprelword support... " >&6; }
+if ${gcc_cv_as_loongarch_dtprelword+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_loongarch_dtprelword=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags 2,18,0 -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ .section .tdata,"awT",@progbits
+x:
+ .word 2
+ .text
+ .dtprelword x+0x8000
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_loongarch_dtprelword" >&5
+$as_echo "$gcc_cv_as_loongarch_dtprelword" >&6; }
+
+if test $gcc_cv_as_loongarch_dtprelword != yes; then
+
+$as_echo "#define HAVE_AS_DTPRELWORD 1" >>confdefs.h
+
+fi
+ ;;
+ s390*-*-*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .gnu_attribute support" >&5
+$as_echo_n "checking assembler for .gnu_attribute support... " >&6; }
+if ${gcc_cv_as_s390_gnu_attribute+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_s390_gnu_attribute=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.gnu_attribute 8,1' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_s390_gnu_attribute=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_s390_gnu_attribute" >&5
+$as_echo "$gcc_cv_as_s390_gnu_attribute" >&6; }
+if test $gcc_cv_as_s390_gnu_attribute = yes; then
+
+$as_echo "#define HAVE_AS_GNU_ATTRIBUTE 1" >>confdefs.h
+
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .machine and .machinemode support" >&5
+$as_echo_n "checking assembler for .machine and .machinemode support... " >&6; }
+if ${gcc_cv_as_s390_machine_machinemode+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_s390_machine_machinemode=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .machinemode push
+ .machinemode pop
+ .machine push
+ .machine pop' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_s390_machine_machinemode=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_s390_machine_machinemode" >&5
+$as_echo "$gcc_cv_as_s390_machine_machinemode" >&6; }
+if test $gcc_cv_as_s390_machine_machinemode = yes; then
+
+$as_echo "#define HAVE_AS_MACHINE_MACHINEMODE 1" >>confdefs.h
+
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for architecture modifiers support" >&5
+$as_echo_n "checking assembler for architecture modifiers support... " >&6; }
+if ${gcc_cv_as_s390_architecture_modifiers+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_s390_architecture_modifiers=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .machine z13+vx ' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_s390_architecture_modifiers=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_s390_architecture_modifiers" >&5
+$as_echo "$gcc_cv_as_s390_architecture_modifiers" >&6; }
+if test $gcc_cv_as_s390_architecture_modifiers = yes; then
+
+$as_echo "#define HAVE_AS_ARCHITECTURE_MODIFIERS 1" >>confdefs.h
+
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for vector load/store alignment hints" >&5
+$as_echo_n "checking assembler for vector load/store alignment hints... " >&6; }
+if ${gcc_cv_as_s390_vector_loadstore_alignment_hints+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_s390_vector_loadstore_alignment_hints=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' vl %v24,0(%r15),3 ' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_s390_vector_loadstore_alignment_hints=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_s390_vector_loadstore_alignment_hints" >&5
+$as_echo "$gcc_cv_as_s390_vector_loadstore_alignment_hints" >&6; }
+if test $gcc_cv_as_s390_vector_loadstore_alignment_hints = yes; then
+
+$as_echo "#define HAVE_AS_VECTOR_LOADSTORE_ALIGNMENT_HINTS 1" >>confdefs.h
+
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for vector load/store alignment hints on z13" >&5
+$as_echo_n "checking assembler for vector load/store alignment hints on z13... " >&6; }
+if ${gcc_cv_as_s390_vector_loadstore_alignment_hints_on_z13+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_s390_vector_loadstore_alignment_hints_on_z13=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' vl %v24,0(%r15),3 ' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -mzarch -march=z13 -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_s390_vector_loadstore_alignment_hints_on_z13=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_s390_vector_loadstore_alignment_hints_on_z13" >&5
+$as_echo "$gcc_cv_as_s390_vector_loadstore_alignment_hints_on_z13" >&6; }
+if test $gcc_cv_as_s390_vector_loadstore_alignment_hints_on_z13 = yes; then
+
+$as_echo "#define HAVE_AS_VECTOR_LOADSTORE_ALIGNMENT_HINTS_ON_Z13 1" >>confdefs.h
+
+fi
+
+
+ ;;
+esac
+
+# Mips, LoongArch and HP-UX need the GNU assembler.
+# Linux on IA64 might be able to use the Intel assembler.
+
+case "$target" in
+ mips*-*-* | loongarch*-*-* | *-*-hpux* )
+ if test x$gas_flag = xyes \
+ || test x"$host" != x"$build" \
+ || test ! -x "$gcc_cv_as" \
+ || "$gcc_cv_as" -v < /dev/null 2>&1 | grep GNU > /dev/null; then
+ :
+ else
+ echo "*** This configuration requires the GNU assembler" >&2
+ exit 1
+ fi
+ ;;
+esac
+
+# This tests if the assembler supports two registers for global_load functions
+# (like in LLVM versions <12) or one register (like in LLVM 12).
+case "$target" in
+ amdgcn-* | gcn-*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler fix for global_load functions" >&5
+$as_echo_n "checking assembler fix for global_load functions... " >&6; }
+ gcc_cv_as_gcn_global_load_fixed=yes
+ if test x$gcc_cv_as != x; then
+ cat > conftest.s <<EOF
+ global_store_dwordx2 v[1:2], v[4:5], s[14:15]
+EOF
+ if $gcc_cv_as -triple=amdgcn--amdhsa -filetype=obj -mcpu=gfx900 -o conftest.o conftest.s > /dev/null 2>&1; then
+ gcc_cv_as_gcn_global_load_fixed=no
+ fi
+ rm -f conftest.s conftest.o conftest
+ fi
+ global_load_fixed=`if test x$gcc_cv_as_gcn_global_load_fixed = xyes; then echo 1; else echo 0; fi`
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_GCN_ASM_GLOBAL_LOAD_FIXED $global_load_fixed
+_ACEOF
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_gcn_global_load_fixed" >&5
+$as_echo "$gcc_cv_as_gcn_global_load_fixed" >&6; }
+ ;;
+esac
+
+case "$target" in
+ amdgcn-* | gcn-*)
+ # Test the LLVM assembler syntax dialect; they have made a number of
+ # changes between LLVM 12 & 13 without any backward compatibility.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for assembler amdgcn_target v2/3 syntax" >&5
+$as_echo_n "checking assembler for assembler amdgcn_target v2/3 syntax... " >&6; }
+if ${gcc_cv_as_gcn_asm_v3_syntax+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_gcn_asm_v3_syntax=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.amdgcn_target "amdgcn-unknown-amdhsa--gfx906+xnack"' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -triple=amdgcn--amdhsa -mcpu=gfx906 -mattr=+xnack -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_gcn_asm_v3_syntax=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_gcn_asm_v3_syntax" >&5
+$as_echo "$gcc_cv_as_gcn_asm_v3_syntax" >&6; }
+if test $gcc_cv_as_gcn_asm_v3_syntax = yes; then
+
+$as_echo "#define HAVE_GCN_ASM_V3_SYNTAX 1" >>confdefs.h
+
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for assembler amdgcn_target v4 syntax" >&5
+$as_echo_n "checking assembler for assembler amdgcn_target v4 syntax... " >&6; }
+if ${gcc_cv_as_gcn_asm_v4_syntax+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_gcn_asm_v4_syntax=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.amdgcn_target "amdgcn-unknown-amdhsa--gfx908:xnack+"' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -triple=amdgcn--amdhsa -mcpu=gfx908 -mattr=+xnack -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_gcn_asm_v4_syntax=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_gcn_asm_v4_syntax" >&5
+$as_echo "$gcc_cv_as_gcn_asm_v4_syntax" >&6; }
+if test $gcc_cv_as_gcn_asm_v4_syntax = yes; then
+
+$as_echo "#define HAVE_GCN_ASM_V4_SYNTAX 1" >>confdefs.h
+
+fi
+
+
+ # Some attribute names changed in the move to v4 ...
+ if test $gcc_cv_as_gcn_asm_v3_syntax = yes; then
+ sramopt="+sram-ecc"
+ sramattr="+sram-ecc"
+ xnackattr="+xnack"
+ elif test $gcc_cv_as_gcn_asm_v4_syntax = yes; then
+ sramopt="+sramecc"
+ sramattr=":sramecc+"
+ xnackattr=":xnack+"
+ else
+ as_fn_error $? "Unrecognised assembler version" "$LINENO" 5
+ fi
+
+ # Test whether the LLVM assembler accepts -mattr=+xnack without any
+ # diagnostic. LLVM 9 & 10 accept the option whether it makes sense or not,
+ # LLVM 12+ throws a warning for GPUs without support.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for assembler accepts -mattr=+xnack for fiji" >&5
+$as_echo_n "checking assembler for assembler accepts -mattr=+xnack for fiji... " >&6; }
+if ${gcc_cv_as_gcn_xnack_ecc_fiji+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_gcn_xnack_ecc_fiji=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -triple=amdgcn--amdhsa -mcpu=fiji -mattr=+xnack 2>conftest.err -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ grep "." conftest.err >&5 \
+ || gcc_cv_as_gcn_xnack_ecc_fiji=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_gcn_xnack_ecc_fiji" >&5
+$as_echo "$gcc_cv_as_gcn_xnack_ecc_fiji" >&6; }
+if test $gcc_cv_as_gcn_xnack_ecc_fiji = yes; then
+
+$as_echo "#define HAVE_GCN_XNACK_FIJI 1" >>confdefs.h
+
+fi
+
+ rm -f conftest.err
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for assembler accepts -mattr=+xnack for gfx900" >&5
+$as_echo_n "checking assembler for assembler accepts -mattr=+xnack for gfx900... " >&6; }
+if ${gcc_cv_as_gcn_xnack_ecc_gfx900+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_gcn_xnack_ecc_gfx900=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -triple=amdgcn--amdhsa -mcpu=gfx900 -mattr=+xnack 2>conftest.err -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ grep "." conftest.err >&5 \
+ || gcc_cv_as_gcn_xnack_ecc_gfx900=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_gcn_xnack_ecc_gfx900" >&5
+$as_echo "$gcc_cv_as_gcn_xnack_ecc_gfx900" >&6; }
+if test $gcc_cv_as_gcn_xnack_ecc_gfx900 = yes; then
+
+$as_echo "#define HAVE_GCN_XNACK_GFX900 1" >>confdefs.h
+
+fi
+
+ rm -f conftest.err
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for assembler accepts -mattr=+xnack for gfx906" >&5
+$as_echo_n "checking assembler for assembler accepts -mattr=+xnack for gfx906... " >&6; }
+if ${gcc_cv_as_gcn_xnack_ecc_gfx906+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_gcn_xnack_ecc_gfx906=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -triple=amdgcn--amdhsa -mcpu=gfx906 -mattr=+xnack 2>conftest.err -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ grep "." conftest.err >&5 \
+ || gcc_cv_as_gcn_xnack_ecc_gfx906=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_gcn_xnack_ecc_gfx906" >&5
+$as_echo "$gcc_cv_as_gcn_xnack_ecc_gfx906" >&6; }
+if test $gcc_cv_as_gcn_xnack_ecc_gfx906 = yes; then
+
+$as_echo "#define HAVE_GCN_XNACK_GFX906 1" >>confdefs.h
+
+fi
+
+ rm -f conftest.err
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for assembler accepts -mattr=+xnack for gfx908" >&5
+$as_echo_n "checking assembler for assembler accepts -mattr=+xnack for gfx908... " >&6; }
+if ${gcc_cv_as_gcn_xnack_ecc_gfx908+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_gcn_xnack_ecc_gfx908=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -triple=amdgcn--amdhsa -mcpu=gfx908 -mattr=+xnack 2>conftest.err -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ grep "." conftest.err >&5 \
+ || gcc_cv_as_gcn_xnack_ecc_gfx908=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_gcn_xnack_ecc_gfx908" >&5
+$as_echo "$gcc_cv_as_gcn_xnack_ecc_gfx908" >&6; }
+if test $gcc_cv_as_gcn_xnack_ecc_gfx908 = yes; then
+
+$as_echo "#define HAVE_GCN_XNACK_GFX908 1" >>confdefs.h
+
+fi
+
+ rm -f conftest.err
+
+ # Test whether the LLVM assembler accepts -mattr=+sramecc without any
+ # diagnostic. LLVM 9 & 10 accept the option whether it makes sense or not,
+ # (some?) LLVM 12 rejects it for all GPUs, and LLVM13 throws a warning
+ # for GPUs without support.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for assembler accepts -mattr=$sramopt for fiji" >&5
+$as_echo_n "checking assembler for assembler accepts -mattr=$sramopt for fiji... " >&6; }
+if ${gcc_cv_as_gcn_sram_ecc_fiji+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_gcn_sram_ecc_fiji=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -triple=amdgcn--amdhsa -mcpu=fiji -mattr=$sramopt 2>conftest.err -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ grep "." conftest.err >&5 \
+ || gcc_cv_as_gcn_sram_ecc_fiji=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_gcn_sram_ecc_fiji" >&5
+$as_echo "$gcc_cv_as_gcn_sram_ecc_fiji" >&6; }
+if test $gcc_cv_as_gcn_sram_ecc_fiji = yes; then
+
+$as_echo "#define HAVE_GCN_SRAM_ECC_FIJI 1" >>confdefs.h
+
+fi
+
+ rm -f conftest.err
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for assembler accepts -mattr=$sramopt for gfx900" >&5
+$as_echo_n "checking assembler for assembler accepts -mattr=$sramopt for gfx900... " >&6; }
+if ${gcc_cv_as_gcn_sram_ecc_gfx900+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_gcn_sram_ecc_gfx900=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -triple=amdgcn--amdhsa -mcpu=gfx900 -mattr=$sramopt 2>conftest.err -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ grep "." conftest.err >&5 \
+ || gcc_cv_as_gcn_sram_ecc_gfx900=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_gcn_sram_ecc_gfx900" >&5
+$as_echo "$gcc_cv_as_gcn_sram_ecc_gfx900" >&6; }
+if test $gcc_cv_as_gcn_sram_ecc_gfx900 = yes; then
+
+$as_echo "#define HAVE_GCN_SRAM_ECC_GFX900 1" >>confdefs.h
+
+fi
+
+ rm -f conftest.err
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for assembler accepts -mattr=$sramopt for gfx906" >&5
+$as_echo_n "checking assembler for assembler accepts -mattr=$sramopt for gfx906... " >&6; }
+if ${gcc_cv_as_gcn_sram_ecc_gfx906+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_gcn_sram_ecc_gfx906=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -triple=amdgcn--amdhsa -mcpu=gfx906 -mattr=$sramopt 2>conftest.err -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ grep "." conftest.err >&5 \
+ || gcc_cv_as_gcn_sram_ecc_gfx906=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_gcn_sram_ecc_gfx906" >&5
+$as_echo "$gcc_cv_as_gcn_sram_ecc_gfx906" >&6; }
+if test $gcc_cv_as_gcn_sram_ecc_gfx906 = yes; then
+
+$as_echo "#define HAVE_GCN_SRAM_ECC_GFX906 1" >>confdefs.h
+
+fi
+
+ rm -f conftest.err
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for assembler accepts -mattr=$sramopt for gfx908" >&5
+$as_echo_n "checking assembler for assembler accepts -mattr=$sramopt for gfx908... " >&6; }
+if ${gcc_cv_as_gcn_sram_ecc_gfx908+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_gcn_sram_ecc_gfx908=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -triple=amdgcn--amdhsa -mcpu=gfx908 -mattr=$sramopt 2>conftest.err -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ grep "." conftest.err >&5 \
+ || gcc_cv_as_gcn_sram_ecc_gfx908=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_gcn_sram_ecc_gfx908" >&5
+$as_echo "$gcc_cv_as_gcn_sram_ecc_gfx908" >&6; }
+if test $gcc_cv_as_gcn_sram_ecc_gfx908 = yes; then
+
+$as_echo "#define HAVE_GCN_SRAM_ECC_GFX908 1" >>confdefs.h
+
+fi
+
+ rm -f conftest.err
+ ;;
+ arm*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for assembler for arm accepts context-specific architecture extensions" >&5
+$as_echo_n "checking assembler for assembler for arm accepts context-specific architecture extensions... " >&6; }
+if ${gcc_cv_as_arm_option_extensions+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_arm_option_extensions=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.text
+ .thumb
+ .syntax unified
+ vmov.f32 s0, s1' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -march=armv8.1-m.main+mve -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_arm_option_extensions=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_arm_option_extensions" >&5
+$as_echo "$gcc_cv_as_arm_option_extensions" >&6; }
+if test $gcc_cv_as_arm_option_extensions = yes; then
+
+$as_echo "#define HAVE_GAS_ARM_EXTENDED_ARCH 1" >>confdefs.h
+
+fi
+
+esac
+
+# ??? Not all targets support dwarf2 debug_line, even within a version
+# of gas. Moreover, we need to emit a valid instruction to trigger any
+# info to the output file. So, as supported targets are added to gas 2.11,
+# add some instruction here to (also) show we expect this might work.
+# ??? Once 2.11 is released, probably need to add first known working
+# version to the per-target configury.
+case "$cpu_type" in
+ aarch64 | alpha | arc | arm | avr | bfin | cris | csky | i386 | loongarch | m32c \
+ | m68k | microblaze | mips | nds32 | nios2 | pa | riscv | rs6000 | score | sparc \
+ | tilegx | tilepro | visium | xstormy16 | xtensa)
+ insn="nop"
+ ;;
+ ia64 | s390)
+ insn="nop 0"
+ ;;
+ mmix)
+ insn="swym 0"
+ ;;
+esac
+if test x"$insn" != x; then
+ conftest_s="\
+ .file 1 \"conftest.s\"
+ .loc 1 3 0
+ $insn"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for dwarf2 debug_line support" >&5
+$as_echo_n "checking assembler for dwarf2 debug_line support... " >&6; }
+if ${gcc_cv_as_dwarf2_debug_line+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_dwarf2_debug_line=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ if test x$gcc_cv_objdump != x \
+ && $gcc_cv_objdump -h conftest.o 2> /dev/null \
+ | grep debug_line > /dev/null 2>&1; then
+ gcc_cv_as_dwarf2_debug_line=yes
+ elif test x$gcc_cv_otool != x \
+ && $gcc_cv_otool -l conftest.o 2> /dev/null \
+ | grep debug_line > /dev/null 2>&1; then
+ gcc_cv_as_dwarf2_debug_line=yes
+ fi
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_dwarf2_debug_line" >&5
+$as_echo "$gcc_cv_as_dwarf2_debug_line" >&6; }
+
+
+
+# The .debug_line file table must be in the exact order that
+# we specified the files, since these indices are also used
+# by DW_AT_decl_file. Approximate this test by testing if
+# the assembler bitches if the same index is assigned twice.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for buggy dwarf2 .file directive" >&5
+$as_echo_n "checking assembler for buggy dwarf2 .file directive... " >&6; }
+if ${gcc_cv_as_dwarf2_file_buggy+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_dwarf2_file_buggy=no
+ if test x$gcc_cv_as != x; then
+ $as_echo ' .file 1 "foo.s"
+ .file 1 "bar.s"' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_dwarf2_file_buggy=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_dwarf2_file_buggy" >&5
+$as_echo "$gcc_cv_as_dwarf2_file_buggy" >&6; }
+
+
+
+ if test $gcc_cv_as_dwarf2_debug_line = yes \
+ && test $gcc_cv_as_dwarf2_file_buggy = no; then
+
+$as_echo "#define HAVE_AS_DWARF2_DEBUG_LINE 1" >>confdefs.h
+
+
+ if test $gcc_cv_as_leb128 = yes; then
+ conftest_s="\
+ .file 1 \"conftest.s\"
+ .loc 1 3 0 view .LVU1
+ $insn
+ .data
+ .uleb128 .LVU1
+ .uleb128 .LVU1
+"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for dwarf2 debug_view support" >&5
+$as_echo_n "checking assembler for dwarf2 debug_view support... " >&6; }
+if ${gcc_cv_as_dwarf2_debug_view+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_dwarf2_debug_view=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_dwarf2_debug_view=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_dwarf2_debug_view" >&5
+$as_echo "$gcc_cv_as_dwarf2_debug_view" >&6; }
+if test $gcc_cv_as_dwarf2_debug_view = yes; then
+
+$as_echo "#define HAVE_AS_DWARF2_DEBUG_VIEW 1" >>confdefs.h
+
+fi
+
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for --gdwarf2 option" >&5
+$as_echo_n "checking assembler for --gdwarf2 option... " >&6; }
+if ${gcc_cv_as_gdwarf2_flag+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_gdwarf2_flag=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$insn" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags --gdwarf2 -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_gdwarf2_flag=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_gdwarf2_flag" >&5
+$as_echo "$gcc_cv_as_gdwarf2_flag" >&6; }
+if test $gcc_cv_as_gdwarf2_flag = yes; then
+
+$as_echo "#define HAVE_AS_GDWARF2_DEBUG_FLAG 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for --gdwarf-5 option" >&5
+$as_echo_n "checking assembler for --gdwarf-5 option... " >&6; }
+if ${gcc_cv_as_gdwarf_5_flag+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_gdwarf_5_flag=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$insn" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags --gdwarf-5 -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ if test x$gcc_cv_objdump != x \
+ && $gcc_cv_objdump -Wi conftest.o 2>&1 \
+ | grep DW_TAG_compile_unit > /dev/null 2>&1; then
+ gcc_cv_as_gdwarf_5_flag=yes;
+ fi
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_gdwarf_5_flag" >&5
+$as_echo "$gcc_cv_as_gdwarf_5_flag" >&6; }
+if test $gcc_cv_as_gdwarf_5_flag = yes; then
+
+$as_echo "#define HAVE_AS_GDWARF_5_DEBUG_FLAG 1" >>confdefs.h
+
+fi
+
+
+ case $target_os in
+ win32 | pe | cygwin* | mingw32*)
+ section_flags=\"dr\"
+ function_type=".def foo; .scl 2; .type 32; .endef"
+ function_size="";;
+ *)
+ section_flags=\"\",%progbits
+ function_type=".type foo, %function"
+ function_size=".size foo, .-foo";;
+ esac
+ dwarf4_debug_info_size=0x46
+ dwarf4_high_pc_form=7
+ dwarf4_debug_aranges_size=0x2c
+ dwarf4_line_sz=9
+ for dwarf4_addr_size in 8 4; do
+ conftest_s="\
+ .file \"a.c\"
+ .text
+.Ltext0:
+ .p2align 4
+ .globl foo
+ $function_type
+foo:
+.LFB0:
+.LM1:
+ $insn
+.LM2:
+.LFE0:
+ $function_size
+.Letext0:
+ .section .debug_info,$section_flags
+.Ldebug_info0:
+ .4byte $dwarf4_debug_info_size
+ .2byte 0x4
+ .4byte .Ldebug_abbrev0
+ .byte 0x$dwarf4_addr_size
+ .byte 0x1
+ .ascii \"GNU C17\\0\"
+ .byte 0xc
+ .ascii \"a.c\\0\"
+ .ascii \"/\\0\"
+ .${dwarf4_addr_size}byte .Ltext0
+ .${dwarf4_addr_size}byte .Letext0-.Ltext0
+ .4byte .Ldebug_line0
+ .byte 0x2
+ .ascii \"foo\\0\"
+ .byte 0x1
+ .byte 0x2
+ .byte 0x1
+ .${dwarf4_addr_size}byte .LFB0
+ .${dwarf4_addr_size}byte .LFE0-.LFB0
+ .byte 0x1
+ .byte 0x9c
+ .byte 0
+ .section .debug_abbrev,$section_flags
+.Ldebug_abbrev0:
+ .byte 0x1
+ .byte 0x11
+ .byte 0x1
+ .byte 0x25
+ .byte 0x8
+ .byte 0x13
+ .byte 0xb
+ .byte 0x3
+ .byte 0x8
+ .byte 0x1b
+ .byte 0x8
+ .byte 0x11
+ .byte 0x1
+ .byte 0x12
+ .byte 0x$dwarf4_high_pc_form
+ .byte 0x10
+ .byte 0x17
+ .byte 0
+ .byte 0
+ .byte 0x2
+ .byte 0x2e
+ .byte 0
+ .byte 0x3f
+ .byte 0x19
+ .byte 0x3
+ .byte 0x8
+ .byte 0x3a
+ .byte 0xb
+ .byte 0x3b
+ .byte 0xb
+ .byte 0x39
+ .byte 0xb
+ .byte 0x11
+ .byte 0x1
+ .byte 0x12
+ .byte 0x$dwarf4_high_pc_form
+ .byte 0x40
+ .byte 0x18
+ .byte 0
+ .byte 0
+ .byte 0
+ .section .debug_aranges,$section_flags
+ .4byte $dwarf4_debug_aranges_size
+ .2byte 0x2
+ .4byte .Ldebug_info0
+ .byte 0x8
+ .byte 0
+ .2byte 0
+ .2byte 0
+ .${dwarf4_addr_size}byte .Ltext0
+ .${dwarf4_addr_size}byte .Letext0-.Ltext0
+ .${dwarf4_addr_size}byte 0
+ .${dwarf4_addr_size}byte 0
+ .section .debug_line,$section_flags
+.Ldebug_line0:
+ .4byte .LELT0-.LSLT0
+.LSLT0:
+ .2byte 0x4
+ .4byte .LELTP0-.LASLTP0
+.LASLTP0:
+ .byte 0x1
+ .byte 0x1
+ .byte 0x1
+ .byte 0xf6
+ .byte 0xf2
+ .byte 0xd
+ .byte 0
+ .byte 0x1
+ .byte 0x1
+ .byte 0x1
+ .byte 0x1
+ .byte 0
+ .byte 0
+ .byte 0
+ .byte 0x1
+ .byte 0
+ .byte 0
+ .byte 0x1
+ .byte 0
+ .ascii \"a.c\\0\"
+ .byte 0
+ .byte 0
+ .byte 0
+ .byte 0
+.LELTP0:
+ .byte 0
+ .byte 0x$dwarf4_line_sz
+ .byte 0x2
+ .${dwarf4_addr_size}byte .LM1
+ .byte 0x18
+ .byte 0x5
+ .byte 0x1
+ .byte 0
+ .byte 0x$dwarf4_line_sz
+ .byte 0x2
+ .${dwarf4_addr_size}byte .LM2
+ .byte 0x1
+ .byte 0x5
+ .byte 0x1
+ .byte 0
+ .byte 0x$dwarf4_line_sz
+ .byte 0x2
+ .${dwarf4_addr_size}byte .Letext0
+ .byte 0
+ .byte 0x1
+ .byte 0x1
+.LELT0:
+ .section .debug_str,$section_flags
+ .ident \"GCC\"
+"
+ dwarf4_success=no
+ if test $dwarf4_addr_size = 4; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for assembly of compiler generated 32-bit .debug_line" >&5
+$as_echo_n "checking assembler for assembly of compiler generated 32-bit .debug_line... " >&6; }
+if ${gcc_cv_as_debug_line_32_flag+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_debug_line_32_flag=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_debug_line_32_flag=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_debug_line_32_flag" >&5
+$as_echo "$gcc_cv_as_debug_line_32_flag" >&6; }
+if test $gcc_cv_as_debug_line_32_flag = yes; then
+ dwarf4_success=yes
+fi
+
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for assembly of compiler generated 64-bit .debug_line" >&5
+$as_echo_n "checking assembler for assembly of compiler generated 64-bit .debug_line... " >&6; }
+if ${gcc_cv_as_debug_line_64_flag+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_debug_line_64_flag=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_debug_line_64_flag=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_debug_line_64_flag" >&5
+$as_echo "$gcc_cv_as_debug_line_64_flag" >&6; }
+if test $gcc_cv_as_debug_line_64_flag = yes; then
+ dwarf4_success=yes
+fi
+
+ fi
+ if test $dwarf4_success = yes; then
+ dwarf4_success=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for --gdwarf-4 not refusing compiler generated .debug_line" >&5
+$as_echo_n "checking assembler for --gdwarf-4 not refusing compiler generated .debug_line... " >&6; }
+if ${gcc_cv_as_dwarf_4_debug_line_flag+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_dwarf_4_debug_line_flag=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags --gdwarf-4 -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_dwarf_4_debug_line_flag=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_dwarf_4_debug_line_flag" >&5
+$as_echo "$gcc_cv_as_dwarf_4_debug_line_flag" >&6; }
+if test $gcc_cv_as_dwarf_4_debug_line_flag = yes; then
+ dwarf4_success=yes
+fi
+
+ break
+ fi
+ dwarf4_debug_info_size=0x36
+ dwarf4_high_pc_form=6
+ dwarf4_debug_aranges_size=0x1c
+ dwarf4_line_sz=5
+ done
+
+ if test $dwarf4_success = yes; then
+ conftest_s="\
+ .file \"foo.c\"
+ .text
+bar:
+#APP
+# 82 \"xxx.h\" 1
+ $insn
+# 0 \"\" 2
+#NO_APP
+ $insn
+foo:
+ .file 1 \"foo.c\"
+ $insn
+ .file 2 \"foo.h\"
+ ret
+"
+ dwarf4_success=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for --gdwarf-4 with the APP marker" >&5
+$as_echo_n "checking assembler for --gdwarf-4 with the APP marker... " >&6; }
+if ${gcc_cv_as_dwarf_4_app_flag+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_dwarf_4_app_flag=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags --gdwarf-4 -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_dwarf_4_app_flag=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_dwarf_4_app_flag" >&5
+$as_echo "$gcc_cv_as_dwarf_4_app_flag" >&6; }
+if test $gcc_cv_as_dwarf_4_app_flag = yes; then
+ dwarf4_success=yes
+fi
+
+ fi
+
+ if test $dwarf4_success = yes; then
+ conftest_s="\
+ .text
+ .globl foo
+ $function_type
+foo:
+ $insn
+ $function_size
+ .file 1 \"foo.c\"
+"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for working --gdwarf-4/--gdwarf-5 for all sources" >&5
+$as_echo_n "checking assembler for working --gdwarf-4/--gdwarf-5 for all sources... " >&6; }
+if ${gcc_cv_as_working_gdwarf_n_flag+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_working_gdwarf_n_flag=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags --gdwarf-4 -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ if test x$gcc_cv_objdump != x \
+ && $gcc_cv_objdump -W conftest.o 2>&1 \
+ | grep conftest.s > /dev/null 2>&1; then
+ gcc_cv_as_working_gdwarf_n_flag=no
+ else
+ gcc_cv_as_working_gdwarf_n_flag=yes
+ fi
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_working_gdwarf_n_flag" >&5
+$as_echo "$gcc_cv_as_working_gdwarf_n_flag" >&6; }
+
+
+ if test $gcc_cv_as_working_gdwarf_n_flag = yes; then
+
+$as_echo "#define HAVE_AS_WORKING_DWARF_N_FLAG 1" >>confdefs.h
+
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for --gstabs option" >&5
+$as_echo_n "checking assembler for --gstabs option... " >&6; }
+if ${gcc_cv_as_gstabs_flag+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_gstabs_flag=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$insn" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags --gstabs -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_gstabs_flag=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_gstabs_flag" >&5
+$as_echo "$gcc_cv_as_gstabs_flag" >&6; }
+if test $gcc_cv_as_gstabs_flag = yes; then
+
+$as_echo "#define HAVE_AS_GSTABS_DEBUG_FLAG 1" >>confdefs.h
+
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for --debug-prefix-map option" >&5
+$as_echo_n "checking assembler for --debug-prefix-map option... " >&6; }
+if ${gcc_cv_as_debug_prefix_map_flag+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_debug_prefix_map_flag=no
+ if test x$gcc_cv_as != x; then
+ $as_echo "$insn" > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags --debug-prefix-map /a=/b -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_debug_prefix_map_flag=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_debug_prefix_map_flag" >&5
+$as_echo "$gcc_cv_as_debug_prefix_map_flag" >&6; }
+if test $gcc_cv_as_debug_prefix_map_flag = yes; then
+
+$as_echo "#define HAVE_AS_DEBUG_PREFIX_MAP 1" >>confdefs.h
+
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for compressed debug sections" >&5
+$as_echo_n "checking assembler for compressed debug sections... " >&6; }
+if ${gcc_cv_as_compress_debug+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_compress_debug=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ # gas compiled without zlib cannot compress debug sections and warns
+ # about it, but still exits successfully. So check for this, too.
+ if $gcc_cv_as --compress-debug-sections -o conftest.o conftest.s 2>&1 | grep -i warning > /dev/null
+ then
+ gcc_cv_as_compress_debug=0
+ # Since binutils 2.26, gas supports --compress-debug-sections=type,
+ # defaulting to the ELF gABI format.
+ elif $gcc_cv_as --compress-debug-sections=zlib-gnu -o conftest.o conftest.s > /dev/null 2>&1
+ then
+ gcc_cv_as_compress_debug=2
+ gcc_cv_as_compress_debug_option="--compress-debug-sections"
+ gcc_cv_as_no_compress_debug_option="--nocompress-debug-sections"
+ # Before binutils 2.26, gas only supported --compress-debug-options and
+ # emitted the traditional GNU format.
+ elif $gcc_cv_as --compress-debug-sections -o conftest.o conftest.s > /dev/null 2>&1
+ then
+ gcc_cv_as_compress_debug=1
+ gcc_cv_as_compress_debug_option="--compress-debug-sections"
+ gcc_cv_as_no_compress_debug_option="--nocompress-debug-sections"
+ else
+ gcc_cv_as_compress_debug=0
+ fi
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_compress_debug" >&5
+$as_echo "$gcc_cv_as_compress_debug" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_AS_COMPRESS_DEBUG $gcc_cv_as_compress_debug
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define AS_COMPRESS_DEBUG_OPTION "$gcc_cv_as_compress_debug_option"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define AS_NO_COMPRESS_DEBUG_OPTION "$gcc_cv_as_no_compress_debug_option"
+_ACEOF
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .lcomm with alignment" >&5
+$as_echo_n "checking assembler for .lcomm with alignment... " >&6; }
+if ${gcc_cv_as_lcomm_with_alignment+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_lcomm_with_alignment=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.lcomm bar,4,16' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_lcomm_with_alignment=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_lcomm_with_alignment" >&5
+$as_echo "$gcc_cv_as_lcomm_with_alignment" >&6; }
+if test $gcc_cv_as_lcomm_with_alignment = yes; then
+
+$as_echo "#define HAVE_GAS_LCOMM_WITH_ALIGNMENT 1" >>confdefs.h
+
+fi
+
+
+if test x$with_sysroot = x && test x$host = x$target \
+ && test "$prefix" != "/usr" && test "x$prefix" != "x$local_prefix" \
+ && test "$prefix" != "NONE"; then
+
+cat >>confdefs.h <<_ACEOF
+#define PREFIX_INCLUDE_DIR "$prefix/include"
+_ACEOF
+
+fi
+
+# Determine the version of glibc, if any, used on the target.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for target glibc version" >&5
+$as_echo_n "checking for target glibc version... " >&6; }
+
+# Check whether --with-glibc-version was given.
+if test "${with_glibc_version+set}" = set; then :
+ withval=$with_glibc_version;
+if echo "$with_glibc_version" | grep '^[0-9][0-9]*\.[0-9][0-9]*$'; then
+ glibc_version_major=`echo "$with_glibc_version" | sed -e 's/\..*//'`
+ glibc_version_minor=`echo "$with_glibc_version" | sed -e 's/.*\.//'`
+else
+ as_fn_error $? "option --with-glibc-version requires a version number M.N" "$LINENO" 5
+fi
+else
+
+glibc_version_major=0
+glibc_version_minor=0
+if test -f $target_header_dir/features.h \
+ && glibc_version_major_define=`$EGREP '^[ ]*#[ ]*define[ ]+__GLIBC__[ ]+[0-9]' $target_header_dir/features.h` \
+ && glibc_version_minor_define=`$EGREP '^[ ]*#[ ]*define[ ]+__GLIBC_MINOR__[ ]+[0-9]' $target_header_dir/features.h`; then
+ glibc_version_major=`echo "$glibc_version_major_define" | sed -e 's/.*__GLIBC__[ ]*//'`
+ glibc_version_minor=`echo "$glibc_version_minor_define" | sed -e 's/.*__GLIBC_MINOR__[ ]*//'`
+fi
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $glibc_version_major.$glibc_version_minor" >&5
+$as_echo "$glibc_version_major.$glibc_version_minor" >&6; }
+
+cat >>confdefs.h <<_ACEOF
+#define TARGET_GLIBC_MAJOR $glibc_version_major
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define TARGET_GLIBC_MINOR $glibc_version_minor
+_ACEOF
+
+
+# Check whether --enable-gnu-unique-object was given.
+if test "${enable_gnu_unique_object+set}" = set; then :
+ enableval=$enable_gnu_unique_object; case $enable_gnu_unique_object in
+ yes | no) ;;
+ *) as_fn_error $? "'$enable_gnu_unique_object' is an invalid value for --enable-gnu-unique-object.
+Valid choices are 'yes' and 'no'." "$LINENO" 5 ;;
+ esac
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for gnu_unique_object" >&5
+$as_echo_n "checking assembler for gnu_unique_object... " >&6; }
+if ${gcc_cv_as_gnu_unique_object+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_gnu_unique_object=no
+ if test x$gcc_cv_as != x; then
+ $as_echo '.type foo, '$target_type_format_char'gnu_unique_object' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_gnu_unique_object=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_gnu_unique_object" >&5
+$as_echo "$gcc_cv_as_gnu_unique_object" >&6; }
+if test $gcc_cv_as_gnu_unique_object = yes; then
+ # We need to unquote above to to use the definition from config.gcc.
+# Also check for ld.so support, i.e. glibc 2.11 or higher.
+
+if test $glibc_version_major -gt 2 \
+ || ( test $glibc_version_major -eq 2 && test $glibc_version_minor -ge 11 ); then :
+ enable_gnu_unique_object=yes
+fi
+
+fi
+
+fi
+
+if test x$enable_gnu_unique_object = xyes; then
+
+$as_echo "#define HAVE_GAS_GNU_UNIQUE_OBJECT 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for tolerance to line number 0" >&5
+$as_echo_n "checking assembler for tolerance to line number 0... " >&6; }
+if ${gcc_cv_as_line_zero+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_line_zero=no
+ if test "x$gcc_cv_as" != x; then
+ { echo '# 1 "test.s" 1'; echo '# 0 "" 2'; } > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5 2>conftest.out'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; } &&
+ test "x`cat conftest.out`" = x
+ then
+ gcc_cv_as_line_zero=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ echo "configure: error output was" >&5
+ cat conftest.out >&5
+ fi
+ rm -f conftest.o conftest.s conftest.out
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_line_zero" >&5
+$as_echo "$gcc_cv_as_line_zero" >&6; }
+if test "x$gcc_cv_as_line_zero" = xyes; then
+
+$as_echo "#define HAVE_AS_LINE_ZERO 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking support for thin archives" >&5
+$as_echo_n "checking support for thin archives... " >&6; }
+thin_archive_support=no
+echo 'int main (void) { return 0; }' > conftest.c
+if ($AR --version | sed 1q | grep "GNU ar" \
+ && $CC $CFLAGS -c conftest.c \
+ && $AR rcT conftest.a conftest.o \
+ && $CC $CFLAGS $LDFLAGS -o conftest conftest.a) >/dev/null 2>&1; then
+ thin_archive_support=yes
+fi
+rm -f conftest.c conftest.o conftest.a conftest
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $thin_archive_support" >&5
+$as_echo "$thin_archive_support" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker PT_GNU_EH_FRAME support" >&5
+$as_echo_n "checking linker PT_GNU_EH_FRAME support... " >&6; }
+gcc_cv_ld_eh_frame_hdr=no
+if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 12 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_eh_frame_hdr=yes
+ fi
+elif test x$gcc_cv_ld != x; then
+ if echo "$ld_ver" | grep GNU > /dev/null; then
+ # Check if linker supports --eh-frame-hdr option
+ if $gcc_cv_ld --help 2>&1 | grep eh-frame-hdr > /dev/null; then
+ gcc_cv_ld_eh_frame_hdr=yes
+ fi
+ else
+ case "$target" in
+ *-*-solaris2*)
+ # Sun ld has various bugs in .eh_frame_hdr support before version 1.2251.
+ if test "$ld_vers_major" -gt 1 || test "$ld_vers_minor" -ge 2251; then
+ gcc_cv_ld_eh_frame_hdr=yes
+ fi
+ ;;
+ esac
+ fi
+fi
+
+if test x"$gcc_cv_ld_eh_frame_hdr" = xyes; then
+
+$as_echo "#define HAVE_LD_EH_FRAME_HDR 1" >>confdefs.h
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_eh_frame_hdr" >&5
+$as_echo "$gcc_cv_ld_eh_frame_hdr" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker CIEv3 in .eh_frame support" >&5
+$as_echo_n "checking linker CIEv3 in .eh_frame support... " >&6; }
+gcc_cv_ld_eh_frame_ciev3=no
+if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 16 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_eh_frame_ciev3=yes
+ fi
+elif test x$gcc_cv_ld != x; then
+ if echo "$ld_ver" | grep GNU > /dev/null; then
+ gcc_cv_ld_eh_frame_ciev3=yes
+ if test 0"$ld_date" -lt 20040513; then
+ if test -n "$ld_date"; then
+ # If there was date string, but was earlier than 2004-05-13, fail
+ gcc_cv_ld_eh_frame_ciev3=no
+ elif test "$ld_vers_major" -lt 2; then
+ gcc_cv_ld_eh_frame_ciev3=no
+ elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 16; then
+ gcc_cv_ld_eh_frame_ciev3=no
+ fi
+ fi
+ else
+ case "$target" in
+ *-*-solaris2*)
+ # Sun ld added support for CIE v3 in .eh_frame in Solaris 11.1.
+ if test "$ld_vers_major" -gt 1 || test "$ld_vers_minor" -ge 2324; then
+ gcc_cv_ld_eh_frame_ciev3=yes
+ fi
+ ;;
+ esac
+ fi
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_LD_EH_FRAME_CIEV3 `if test x"$gcc_cv_ld_eh_frame_ciev3" = xyes; then echo 1; else echo 0; fi`
+_ACEOF
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_eh_frame_ciev3" >&5
+$as_echo "$gcc_cv_ld_eh_frame_ciev3" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker position independent executable support" >&5
+$as_echo_n "checking linker position independent executable support... " >&6; }
+gcc_cv_ld_pie=no
+if test $in_tree_ld = yes ; then
+ case "$target" in
+ # Full PIE support on Solaris was only introduced in gld 2.26.
+ *-*-solaris2*) gcc_gld_pie_min_version=26 ;;
+ *) gcc_gld_pie_min_version=15 ;;
+ esac
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge "$gcc_gld_pie_min_version" -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_pie=yes
+ fi
+elif test x$gcc_cv_ld != x; then
+ # Check if linker supports -pie option
+ if $gcc_cv_ld --help 2>&1 | grep -- -pie > /dev/null; then
+ gcc_cv_ld_pie=yes
+ case "$target" in
+ *-*-solaris2*)
+ if echo "$ld_ver" | grep GNU > /dev/null \
+ && test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 26; then
+ gcc_cv_ld_pie=no
+ fi
+ ;;
+ esac
+ else
+ case "$target" in
+ *-*-solaris2.1[1-9]*)
+ # Solaris 11.3 added PIE support.
+ if $gcc_cv_ld -z help 2>&1 | grep -- type.*pie > /dev/null; then
+ gcc_cv_ld_pie=yes
+ fi
+ ;;
+ esac
+ fi
+fi
+if test x"$gcc_cv_ld_pie" = xyes; then
+
+$as_echo "#define HAVE_LD_PIE 1" >>confdefs.h
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_pie" >&5
+$as_echo "$gcc_cv_ld_pie" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker PIE support with copy reloc" >&5
+$as_echo_n "checking linker PIE support with copy reloc... " >&6; }
+gcc_cv_ld_pie_copyreloc=no
+if test $gcc_cv_ld_pie = yes ; then
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 25 -o "$gcc_cv_gld_major_version" -gt 2; then
+ gcc_cv_ld_pie_copyreloc=yes
+ fi
+ elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x ; then
+ # Check if linker supports -pie option with copy reloc
+ case "$target" in
+ i?86-*-linux* | x86_64-*-linux*)
+ cat > conftest1.s <<EOF
+ .globl a_glob
+ .data
+ .type a_glob, @object
+ .size a_glob, 4
+a_glob:
+ .long 2
+EOF
+ cat > conftest2.s <<EOF
+ .text
+ .globl main
+ .type main, @function
+main:
+ movl %eax, a_glob(%rip)
+ .size main, .-main
+ .globl ptr
+ .section .data.rel,"aw",@progbits
+ .type ptr, @object
+ptr:
+ .quad a_glob
+EOF
+ if $gcc_cv_as --64 -o conftest1.o conftest1.s > /dev/null 2>&1 \
+ && $gcc_cv_ld -shared -melf_x86_64 -o conftest1.so conftest1.o > /dev/null 2>&1 \
+ && $gcc_cv_as --64 -o conftest2.o conftest2.s > /dev/null 2>&1 \
+ && $gcc_cv_ld -pie -melf_x86_64 -o conftest conftest2.o conftest1.so > /dev/null 2>&1; then
+ gcc_cv_ld_pie_copyreloc=yes
+ fi
+ rm -f conftest conftest1.so conftest1.o conftest2.o conftest1.s conftest2.s
+ ;;
+ esac
+ fi
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_LD_PIE_COPYRELOC `if test x"$gcc_cv_ld_pie_copyreloc" = xyes; then echo 1; else echo 0; fi`
+_ACEOF
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_pie_copyreloc" >&5
+$as_echo "$gcc_cv_ld_pie_copyreloc" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker EH-compatible garbage collection of sections" >&5
+$as_echo_n "checking linker EH-compatible garbage collection of sections... " >&6; }
+gcc_cv_ld_eh_gc_sections=no
+if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 17 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_eh_gc_sections=yes
+ fi
+elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x -a x$gcc_cv_objdump != x ; then
+ cat > conftest.s <<EOF
+ .section .text
+.globl _start
+ .type _start, @function
+_start:
+ .long foo
+ .size _start, .-_start
+ .section .text.foo,"ax",@progbits
+ .type foo, @function
+foo:
+ .long 0
+ .size foo, .-foo
+ .section .gcc_except_table.foo,"a",@progbits
+.L0:
+ .long 0
+ .section .eh_frame,"a",@progbits
+ .long .L0
+EOF
+ if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
+ if $gcc_cv_ld -o conftest conftest.o --entry=_start --gc-sections 2>&1 \
+ | grep "gc-sections option ignored" > /dev/null; then
+ gcc_cv_ld_eh_gc_sections=no
+ elif $gcc_cv_objdump -h conftest 2> /dev/null \
+ | grep gcc_except_table > /dev/null; then
+ gcc_cv_ld_eh_gc_sections=yes
+ # If no COMDAT groups, the compiler will emit .gnu.linkonce.t. sections.
+ if test x$gcc_cv_as_comdat_group != xyes; then
+ gcc_cv_ld_eh_gc_sections=no
+ cat > conftest.s <<EOF
+ .section .text
+.globl _start
+ .type _start, @function
+_start:
+ .long foo
+ .size _start, .-_start
+ .section .gnu.linkonce.t.foo,"ax",@progbits
+ .type foo, @function
+foo:
+ .long 0
+ .size foo, .-foo
+ .section .gcc_except_table.foo,"a",@progbits
+.L0:
+ .long 0
+ .section .eh_frame,"a",@progbits
+ .long .L0
+EOF
+ if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
+ if $gcc_cv_ld -o conftest conftest.o --entry=_start --gc-sections 2>&1 \
+ | grep "gc-sections option ignored" > /dev/null; then
+ gcc_cv_ld_eh_gc_sections=no
+ elif $gcc_cv_objdump -h conftest 2> /dev/null \
+ | grep gcc_except_table > /dev/null; then
+ gcc_cv_ld_eh_gc_sections=yes
+ fi
+ fi
+ fi
+ fi
+ fi
+ rm -f conftest.s conftest.o conftest
+fi
+case "$target" in
+ hppa*-*-linux*)
+ # ??? This apparently exposes a binutils bug with PC-relative relocations.
+ gcc_cv_ld_eh_gc_sections=no
+ ;;
+esac
+if test x$gcc_cv_ld_eh_gc_sections = xyes; then
+
+$as_echo "#define HAVE_LD_EH_GC_SECTIONS 1" >>confdefs.h
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_eh_gc_sections" >&5
+$as_echo "$gcc_cv_ld_eh_gc_sections" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker EH garbage collection of sections bug" >&5
+$as_echo_n "checking linker EH garbage collection of sections bug... " >&6; }
+gcc_cv_ld_eh_gc_sections_bug=no
+if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -lt 19 -o "$gcc_cv_gld_major_version" -lt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_eh_gc_sections_bug=yes
+ fi
+elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x -a x$gcc_cv_objdump != x -a x$gcc_cv_as_comdat_group = xyes; then
+ gcc_cv_ld_eh_gc_sections_bug=yes
+ cat > conftest.s <<EOF
+ .section .text
+.globl _start
+ .type _start, @function
+_start:
+ .long foo
+ .size _start, .-_start
+ .section .text.startup.foo,"ax",@progbits
+ .type foo, @function
+foo:
+ .long 0
+ .size foo, .-foo
+ .section .gcc_except_table.foo,"a",@progbits
+.L0:
+ .long 0
+ .section .eh_frame,"a",@progbits
+ .long .L0
+EOF
+ if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
+ if $gcc_cv_ld -o conftest conftest.o --entry=_start --gc-sections 2>&1 \
+ | grep "gc-sections option ignored" > /dev/null; then
+ :
+ elif $gcc_cv_objdump -h conftest 2> /dev/null \
+ | grep gcc_except_table > /dev/null; then
+ gcc_cv_ld_eh_gc_sections_bug=no
+ fi
+ fi
+ rm -f conftest.s conftest.o conftest
+fi
+if test x$gcc_cv_ld_eh_gc_sections_bug = xyes; then
+
+$as_echo "#define HAVE_LD_EH_GC_SECTIONS_BUG 1" >>confdefs.h
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_eh_gc_sections_bug" >&5
+$as_echo "$gcc_cv_ld_eh_gc_sections_bug" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker for compressed debug sections" >&5
+$as_echo_n "checking linker for compressed debug sections... " >&6; }
+# gold/gld support compressed debug sections since binutils 2.19/2.21
+# In binutils 2.26, gld gained support for the ELF gABI format.
+if test $in_tree_ld = yes ; then
+ gcc_cv_ld_compress_debug=0
+ if test $ld_is_mold = yes; then
+ gcc_cv_ld_compress_debug=3
+ gcc_cv_ld_compress_debug_option="--compress-debug-sections"
+ elif test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 19 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes && test $ld_is_gold = yes; then
+ gcc_cv_ld_compress_debug=2
+ gcc_cv_ld_compress_debug_option="--compress-debug-sections"
+ elif test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 26 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes && test $ld_is_gold = no; then
+ gcc_cv_ld_compress_debug=3
+ gcc_cv_ld_compress_debug_option="--compress-debug-sections"
+ elif test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 21 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_compress_debug=1
+ fi
+elif echo "$ld_ver" | grep GNU > /dev/null; then
+ if test $ld_is_mold = yes; then
+ gcc_cv_ld_compress_debug=3
+ gcc_cv_ld_compress_debug_option="--compress-debug-sections"
+ elif test "$ld_vers_major" -lt 2 \
+ || test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 21; then
+ gcc_cv_ld_compress_debug=0
+ elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 26; then
+ gcc_cv_ld_compress_debug=1
+ else
+ gcc_cv_ld_compress_debug=3
+ gcc_cv_ld_compress_debug_option="--compress-debug-sections"
+ fi
+ if test $ld_is_gold = yes; then
+ gcc_cv_ld_compress_debug=2
+ gcc_cv_ld_compress_debug_option="--compress-debug-sections"
+ fi
+else
+ case "${target}" in
+ *-*-solaris2*)
+ # Introduced in Solaris 11.2.
+ if $gcc_cv_ld --help 2>&1 | grep -- '-z compress-sections' > /dev/null; then
+ gcc_cv_ld_compress_debug=3
+ gcc_cv_ld_compress_debug_option="-z compress-sections"
+ else
+ gcc_cv_ld_compress_debug=0
+ fi
+ ;;
+ *)
+ # Assume linkers other than GNU ld don't support compessed debug
+ # sections.
+ gcc_cv_ld_compress_debug=0
+ ;;
+ esac
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_LD_COMPRESS_DEBUG $gcc_cv_ld_compress_debug
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define LD_COMPRESS_DEBUG_OPTION "$gcc_cv_ld_compress_debug_option"
+_ACEOF
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_compress_debug" >&5
+$as_echo "$gcc_cv_ld_compress_debug" >&6; }
+
+if test x"$ld64_flag" = x"yes"; then
+
+ # Set defaults for possibly untestable items.
+ gcc_cv_ld64_export_dynamic=0
+ gcc_cv_ld64_platform_version=0
+
+ if test "$build" = "$host"; then
+ darwin_try_test=1
+ else
+ darwin_try_test=0
+ fi
+
+ # On Darwin, because of FAT library support, it is often possible to execute
+ # exes from compatible archs even when the host differs from the build system.
+ case "$build","$host" in
+ x86_64-*-darwin*,i?86-*-darwin* | powerpc64*-*-darwin*,powerpc*-*-darwin*)
+ darwin_try_test=1;;
+ *) ;;
+ esac
+
+ # If the configurer specified a minimum ld64 version to be supported, then use
+ # that to determine feature support.
+ if test x"${gcc_cv_ld64_version}" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking ld64 specified version" >&5
+$as_echo_n "checking ld64 specified version... " >&6; }
+ gcc_cv_ld64_major=`echo "$gcc_cv_ld64_version" | sed -e 's/\..*//'`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld64_major" >&5
+$as_echo "$gcc_cv_ld64_major" >&6; }
+ if test "$gcc_cv_ld64_major" -ge 236; then
+ gcc_cv_ld64_export_dynamic=1
+ fi
+ if test "$gcc_cv_ld64_major" -ge 512; then
+ gcc_cv_ld64_platform_version=1
+ fi
+ elif test -x "$gcc_cv_ld" -a "$darwin_try_test" -eq 1; then
+ # If the version was not specified, try to find it.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking linker version" >&5
+$as_echo_n "checking linker version... " >&6; }
+ if test x"${gcc_cv_ld64_version}" = x; then
+ gcc_cv_ld64_version=`$gcc_cv_ld -v 2>&1 | grep ld64 | sed s/.*ld64-// | awk '{print $1}'`
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld64_version" >&5
+$as_echo "$gcc_cv_ld64_version" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking linker for -export_dynamic support" >&5
+$as_echo_n "checking linker for -export_dynamic support... " >&6; }
+ gcc_cv_ld64_export_dynamic=1
+ if $gcc_cv_ld -export_dynamic < /dev/null 2>&1 | grep 'unknown option' > /dev/null; then
+ gcc_cv_ld64_export_dynamic=0
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld64_export_dynamic" >&5
+$as_echo "$gcc_cv_ld64_export_dynamic" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking linker for -platform_version support" >&5
+$as_echo_n "checking linker for -platform_version support... " >&6; }
+ gcc_cv_ld64_platform_version=1
+ if $gcc_cv_ld -platform_version macos 10.5 0.0 < /dev/null 2>&1 | grep 'unknown option' > /dev/null; then
+ gcc_cv_ld64_platform_version=0
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld64_platform_version" >&5
+$as_echo "$gcc_cv_ld64_platform_version" >&6; }
+ fi
+
+ if test x"${gcc_cv_ld64_version}" != x; then
+
+cat >>confdefs.h <<_ACEOF
+#define LD64_VERSION "${gcc_cv_ld64_version}"
+_ACEOF
+
+ fi
+
+
+cat >>confdefs.h <<_ACEOF
+#define LD64_HAS_EXPORT_DYNAMIC $gcc_cv_ld64_export_dynamic
+_ACEOF
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LD64_HAS_PLATFORM_VERSION $gcc_cv_ld64_platform_version
+_ACEOF
+
+fi
+
+if test x"$dsymutil_flag" = x"yes"; then
+
+ # If the user specified a dsymutil path, then we will already have the
+ # version string, otherwise, pick it up.
+ if test x"$gcc_cv_dsymutil" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: dsymutil is a required tool for this system, but not found" >&5
+$as_echo "$as_me: WARNING: dsymutil is a required tool for this system, but not found" >&2;}
+ dsymutil_vers="tool unspecified"
+ elif test x"$dsymutil_vers" = x; then
+ dsymutil_vers=`$gcc_cv_dsymutil -v /dev/null 2>&1`
+ fi
+
+ dsymutil_temp=`echo $dsymutil_vers | sed 1q`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dsymutil version \"$dsymutil_temp\"" >&5
+$as_echo_n "checking dsymutil version \"$dsymutil_temp\"... " >&6; }
+ if echo $dsymutil_temp | grep dwarfutils- > /dev/null; then
+ dsymutil_kind=DWARFUTILS
+ dsymutil_vers=`echo $dsymutil_temp | sed 's/.*dwarfutils-\([0-9\.]*\).*/\1/'`
+ elif echo $dsymutil_temp | grep clang- > /dev/null; then
+ dsymutil_kind=CLANG
+ dsymutil_vers=`echo $dsymutil_temp | sed 's/.*clang-\([0-9\.]*\).*/\1/'`
+ elif echo $dsymutil_temp | grep 'LLVM version ' > /dev/null; then
+ dsymutil_kind=LLVM
+ dsymutil_vers=`echo $dsymutil_temp | sed 's/.*LLVM\ version\ \([0-9\.]*\).*/\1/'`
+ else
+ dsymutil_kind=UNKNOWN
+ dsymutil_vers="0.0"
+ fi
+ dsymutil_major=`expr "$dsymutil_vers" : '\([0-9]*\)'`
+ dsymutil_minor=`expr "$dsymutil_vers" : '[0-9]*\.\([0-9]*\)'`
+ dsymutil_tiny=`expr "$dsymutil_vers" : '[0-9]*\.[0-9]*\.\([0-9]*\)'`
+ if test x"${dsymutil_minor}" = x; then
+ dsymutil_minor=0
+ fi
+ if test x"${dsymutil_tiny}" = x; then
+ dsymutil_tiny=0
+ fi
+
+cat >>confdefs.h <<_ACEOF
+#define DSYMUTIL_VERSION $dsymutil_kind,${dsymutil_major},${dsymutil_minor},${dsymutil_tiny}
+_ACEOF
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dsymutil_vers : $dsymutil_kind ${dsymutil_major} ${dsymutil_minor} ${dsymutil_tiny} " >&5
+$as_echo "$dsymutil_vers : $dsymutil_kind ${dsymutil_major} ${dsymutil_minor} ${dsymutil_tiny} " >&6; }
+fi
+
+case $target_os in
+ win32 | pe | cygwin* | mingw32*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking broken PE linker dwarf5 support" >&5
+$as_echo_n "checking broken PE linker dwarf5 support... " >&6; }
+ gcc_cv_ld_broken_pe_dwarf5=yes
+ if test $in_tree_ld = yes ; then
+ if grep -q '\.debug_loclists.*BLOCK.*__section_alignment__.*NOLOAD.*:' \
+ $gcc_cv_ld_gld_srcdir/scripttempl/pe*.sc \
+ && grep -q '\.debug_rnglists.*BLOCK.*__section_alignment__.*NOLOAD.*:' \
+ $gcc_cv_ld_gld_srcdir/scripttempl/pe*.sc; then
+ gcc_cv_ld_broken_pe_dwarf5=no
+ fi
+ else
+ if $gcc_cv_ld --verbose 2>&1 | grep -q '\.debug_loclists.*BLOCK.*__section_alignment__.*NOLOAD.*:' \
+ && $gcc_cv_ld --verbose 2>&1 | grep -q '\.debug_rnglists.*BLOCK.*__section_alignment__.*NOLOAD.*:'; then
+ gcc_cv_ld_broken_pe_dwarf5=no
+ fi
+ fi
+ if test x$gcc_cv_ld_broken_pe_dwarf5 = xyes; then
+
+$as_echo "#define HAVE_LD_BROKEN_PE_DWARF5 1" >>confdefs.h
+
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_broken_pe_dwarf5" >&5
+$as_echo "$gcc_cv_ld_broken_pe_dwarf5" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking PE linker --disable-dynamicbase support" >&5
+$as_echo_n "checking PE linker --disable-dynamicbase support... " >&6; }
+ gcc_cv_ld_disable_dynamicbase=no
+ if test $in_tree_ld = yes; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 36 -o "$gcc_cv_gld_major_version" -gt 2; then \
+ gcc_cv_ld_disable_dynamicbase=yes
+ fi
+ else
+ if $gcc_cv_ld --help 2>&1 | grep -q 'disable\-]dynamicbase' > /dev/null; then
+ gcc_cv_ld_disable_dynamicbase=yes
+ fi
+ fi
+ if test x"$gcc_cv_ld_disable_dynamicbase" = xyes; then
+
+$as_echo "#define HAVE_LD_PE_DISABLE_DYNAMICBASE 1" >>confdefs.h
+
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_disable_dynamicbase" >&5
+$as_echo "$gcc_cv_ld_disable_dynamicbase" >&6; }
+ ;;
+esac
+
+# --------
+# UNSORTED
+# --------
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker --as-needed support" >&5
+$as_echo_n "checking linker --as-needed support... " >&6; }
+if ${gcc_cv_ld_as_needed+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_ld_as_needed=no
+gcc_cv_ld_as_needed_option='--as-needed'
+gcc_cv_ld_no_as_needed_option='--no-as-needed'
+if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 16 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_as_needed=yes
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 28; then
+ gcc_cv_ld_as_needed_option='--push-state --as-needed'
+ gcc_cv_ld_no_as_needed_option='--pop-state'
+ fi
+ fi
+elif test x$gcc_cv_ld != x; then
+ # Check if linker supports --as-needed and --no-as-needed options
+ if $gcc_cv_ld --help 2>&1 | grep as-needed > /dev/null; then
+ gcc_cv_ld_as_needed=yes
+ if $gcc_cv_ld --help 2>&1 | grep push-state > /dev/null \
+ && $gcc_cv_ld --help 2>&1 | grep pop-state > /dev/null \
+ && echo "$ld_ver" | grep GNU > /dev/null \
+ && test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -ge 28; then
+ # Use these options only when both ld.bfd and ld.gold support
+ # --push-state/--pop-state, which unfortunately wasn't added
+ # at the same time.
+ gcc_cv_ld_as_needed_option='--push-state --as-needed'
+ gcc_cv_ld_no_as_needed_option='--pop-state'
+ fi
+ fi
+ case "$target:$gnu_ld" in
+ *-*-solaris2*:no)
+ # Solaris 2 ld always supports -z ignore/-z record. Prefer the native
+ # forms.
+ gcc_cv_ld_as_needed=yes
+ gcc_cv_ld_as_needed_option="-z ignore"
+ gcc_cv_ld_no_as_needed_option="-z record"
+ ;;
+ esac
+fi
+# --as-needed/-z ignore can only be used if libgcc_s.so.1 uses
+# dl_iterate_phdr, i.e. since Solaris 11.
+case "$target" in
+ *-*-solaris2.1[1-9]*)
+ case "$target" in
+ i?86-*-* | x86_64-*-*)
+ if echo "$ld_ver" | grep GNU > /dev/null; then
+ # Doesn't work with gld on Solaris/x86 due to PR ld/12320.
+ gcc_cv_ld_as_needed=no
+ fi
+ ;;
+ esac
+ ;;
+ *-*-solaris2*)
+ gcc_cv_ld_as_needed=no
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_as_needed" >&5
+$as_echo "$gcc_cv_ld_as_needed" >&6; }
+if test x"$gcc_cv_ld_as_needed" = xyes; then
+
+$as_echo "#define HAVE_LD_AS_NEEDED 1" >>confdefs.h
+
+
+cat >>confdefs.h <<_ACEOF
+#define LD_AS_NEEDED_OPTION "$gcc_cv_ld_as_needed_option"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define LD_NO_AS_NEEDED_OPTION "$gcc_cv_ld_no_as_needed_option"
+_ACEOF
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker mapfile support for clearing hardware capabilities" >&5
+$as_echo_n "checking linker mapfile support for clearing hardware capabilities... " >&6; }
+saved_LDFLAGS="$LDFLAGS"
+for clearcap_map in sol2-clearcapv2.map sol2-clearcap.map; do
+ LDFLAGS="$saved_LDFLAGS -Wl,-M,${srcdir}/config/$clearcap_map"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int main(void) {return 0;}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ gcc_cv_ld_clearcap=yes; break
+else
+ gcc_cv_ld_clearcap=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+done
+LDFLAGS="$saved_LDFLAGS"
+if test "x$gcc_cv_ld_clearcap" = xyes; then
+
+$as_echo "#define HAVE_LD_CLEARCAP 1" >>confdefs.h
+
+ ac_config_links="$ac_config_links clearcap.map:${srcdir}/config/$clearcap_map"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_clearcap" >&5
+$as_echo "$gcc_cv_ld_clearcap" >&6; }
+
+case "$target" in
+ powerpc*-*-*)
+ case "$target" in
+ *le-*-linux*)
+ emul_name="-melf32lppc"
+ ;;
+ *)
+ emul_name="-melf32ppc"
+ ;;
+ esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking linker .gnu.attributes long double support" >&5
+$as_echo_n "checking linker .gnu.attributes long double support... " >&6; }
+if ${gcc_cv_ld_ppc_attr+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_ld_ppc_attr=no
+ if test x"$ld_is_gold" = xyes; then
+ gcc_cv_ld_ppc_attr=yes
+ elif test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 \
+ -a "$gcc_cv_gld_minor_version" -ge 28 \
+ -o "$gcc_cv_gld_major_version" -gt 2; then
+ gcc_cv_ld_ppc_attr=yes
+ fi
+ elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x ; then
+ # check that merging the long double .gnu_attribute doesn't warn
+ cat > conftest1.s <<EOF
+ .gnu_attribute 4,1
+EOF
+ cat > conftest2.s <<EOF
+ .gnu_attribute 4,9
+EOF
+ if $gcc_cv_as -a32 -o conftest1.o conftest1.s > /dev/null 2>&1 \
+ && $gcc_cv_as -a32 -o conftest2.o conftest2.s > /dev/null 2>&1 \
+ && $gcc_cv_ld $emul_name -r -o conftest.o conftest1.o conftest2.o > /dev/null 2> conftest.err \
+ && test ! -s conftest.err; then
+ gcc_cv_ld_ppc_attr=yes
+ fi
+ rm -f conftest.err conftest.o conftest1.o conftest2.o conftest1.s conftest2.s
+ fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_ppc_attr" >&5
+$as_echo "$gcc_cv_ld_ppc_attr" >&6; }
+ if test x$gcc_cv_ld_ppc_attr = xyes; then
+
+$as_echo "#define HAVE_LD_PPC_GNU_ATTR_LONG_DOUBLE 1" >>confdefs.h
+
+ fi
+ ;;
+esac
+
+case "$target:$tm_file" in
+ powerpc64*-*-freebsd* | powerpc64*-*-linux* | powerpc*-*-linux*rs6000/biarch64.h*)
+ case "$target" in
+ *le-*-linux*)
+ emul_name="-melf64lppc"
+ ;;
+ *-*-linux*)
+ emul_name="-melf64ppc"
+ ;;
+ *le-*-freebsd*)
+ emul_name="-melf64lppc_fbsd"
+ ;;
+ *-*-freebsd*)
+ emul_name="-melf64ppc_fbsd"
+ ;;
+ esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking linker support for omitting dot symbols" >&5
+$as_echo_n "checking linker support for omitting dot symbols... " >&6; }
+if ${gcc_cv_ld_no_dot_syms+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_ld_no_dot_syms=no
+ if test x"$ld_is_gold" = xyes; then
+ gcc_cv_ld_no_dot_syms=yes
+ elif test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 16 -o "$gcc_cv_gld_major_version" -gt 2; then
+ gcc_cv_ld_no_dot_syms=yes
+ fi
+ elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x ; then
+ cat > conftest1.s <<EOF
+ .text
+ bl .foo
+EOF
+ cat > conftest2.s <<EOF
+ .section ".opd","aw"
+ .align 3
+ .globl foo
+ .type foo,@function
+foo:
+ .quad .LEfoo,.TOC.@tocbase,0
+ .text
+.LEfoo:
+ blr
+ .size foo,.-.LEfoo
+EOF
+ if $gcc_cv_as -a64 -o conftest1.o conftest1.s > /dev/null 2>&1 \
+ && $gcc_cv_as -a64 -o conftest2.o conftest2.s > /dev/null 2>&1 \
+ && $gcc_cv_ld $emul_name -o conftest conftest1.o conftest2.o > /dev/null 2>&1; then
+ gcc_cv_ld_no_dot_syms=yes
+ fi
+ rm -f conftest conftest1.o conftest2.o conftest1.s conftest2.s
+ fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_no_dot_syms" >&5
+$as_echo "$gcc_cv_ld_no_dot_syms" >&6; }
+ if test x"$gcc_cv_ld_no_dot_syms" = xyes; then
+
+$as_echo "#define HAVE_LD_NO_DOT_SYMS 1" >>confdefs.h
+
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking linker large toc support" >&5
+$as_echo_n "checking linker large toc support... " >&6; }
+if ${gcc_cv_ld_large_toc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_ld_large_toc=no
+ if test x"$ld_is_gold" = xyes; then
+ gcc_cv_ld_large_toc=yes
+ elif test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 21 -o "$gcc_cv_gld_major_version" -gt 2; then
+ gcc_cv_ld_large_toc=yes
+ fi
+ elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x ; then
+ cat > conftest.s <<EOF
+ .section ".tbss","awT",@nobits
+ .align 3
+ie0: .space 8
+ .global _start
+ .text
+_start:
+ addis 9,13,ie0@got@tprel@ha
+ ld 9,ie0@got@tprel@l(9)
+EOF
+ if $gcc_cv_as -a64 -o conftest.o conftest.s > /dev/null 2>&1 \
+ && $gcc_cv_ld $emul_name --no-toc-sort -o conftest conftest.o > /dev/null 2>&1; then
+ gcc_cv_ld_large_toc=yes
+ fi
+ rm -f conftest conftest.o conftest.s
+ fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_large_toc" >&5
+$as_echo "$gcc_cv_ld_large_toc" >&6; }
+ if test x"$gcc_cv_ld_large_toc" = xyes; then
+
+$as_echo "#define HAVE_LD_LARGE_TOC 1" >>confdefs.h
+
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking linker toc pointer alignment" >&5
+$as_echo_n "checking linker toc pointer alignment... " >&6; }
+if ${gcc_cv_ld_toc_align+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test x$gcc_cv_as != x -a x$gcc_cv_ld != x -a x$gcc_cv_nm != x; then
+ cat > conftest.s <<EOF
+ .global _start
+ .text
+_start:
+ addis 9,2,x@got@ha
+ .section .data.rel.ro,"aw",@progbits
+ .p2align 16
+ .space 32768
+x: .quad .TOC.
+EOF
+ if $gcc_cv_as -a64 -o conftest.o conftest.s > /dev/null 2>&1 \
+ && $gcc_cv_ld $emul_name -z norelro -o conftest conftest.o > /dev/null 2>&1; then
+ gcc_cv_ld_toc_align=`$gcc_cv_nm conftest | ${AWK} '/\.TOC\./ { match ($0, "0[[:xdigit:]]*", a); print strtonum ("0x" substr(a[0], length(a[0])-3)) }'`
+ fi
+ rm -f conftest conftest.o conftest.s
+ fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_toc_align" >&5
+$as_echo "$gcc_cv_ld_toc_align" >&6; }
+ if test -n "$gcc_cv_ld_toc_align" && test $gcc_cv_ld_toc_align -gt 8; then
+
+cat >>confdefs.h <<_ACEOF
+#define POWERPC64_TOC_POINTER_ALIGNMENT $gcc_cv_ld_toc_align
+_ACEOF
+
+ fi
+ ;;
+esac
+
+case "$target" in
+ *-*-aix*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking linker large toc support" >&5
+$as_echo_n "checking linker large toc support... " >&6; }
+if ${gcc_cv_ld_large_toc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_ld_large_toc=no
+ if test x$gcc_cv_as != x ; then
+ cat > conftest.s <<EOF
+ .toc
+LC..1:
+ .tc a[TC],a[RW]
+ .extern a[RW]
+ .csect .text[PR]
+.largetoctest:
+ addis 9,LC..1@u(2)
+ ld 3,LC..1@l(9)
+EOF
+ if $gcc_cv_as -a64 -o conftest.o conftest.s > /dev/null 2>&1; then
+ gcc_cv_ld_large_toc=yes
+ fi
+ rm -f conftest conftest.o conftest.s
+ fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_large_toc" >&5
+$as_echo "$gcc_cv_ld_large_toc" >&6; }
+ if test x"$gcc_cv_ld_large_toc" = xyes; then
+
+$as_echo "#define HAVE_LD_LARGE_TOC 1" >>confdefs.h
+
+ fi
+ ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker --build-id support" >&5
+$as_echo_n "checking linker --build-id support... " >&6; }
+if ${gcc_cv_ld_buildid+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_ld_buildid=no
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a \
+ "$gcc_cv_gld_minor_version" -ge 18 -o \
+ "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_buildid=yes
+ fi
+ elif test x$gcc_cv_ld != x; then
+ if $gcc_cv_ld --help 2>&1 | grep build-id > /dev/null; then
+ gcc_cv_ld_buildid=yes
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_buildid" >&5
+$as_echo "$gcc_cv_ld_buildid" >&6; }
+if test x"$gcc_cv_ld_buildid" = xyes; then
+
+$as_echo "#define HAVE_LD_BUILDID 1" >>confdefs.h
+
+fi
+
+# Check whether --enable-linker-build-id was given.
+if test "${enable_linker_build_id+set}" = set; then :
+ enableval=$enable_linker_build_id;
+else
+ enable_linker_build_id=no
+fi
+
+
+if test x"$enable_linker_build_id" = xyes; then
+ if test x"$gcc_cv_ld_buildid" = xyes; then
+
+$as_echo "#define ENABLE_LD_BUILDID 1" >>confdefs.h
+
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --build-id is not supported by your linker; --enable-linker-build-id ignored" >&5
+$as_echo "$as_me: WARNING: --build-id is not supported by your linker; --enable-linker-build-id ignored" >&2;}
+ fi
+fi
+
+# In binutils 2.21, GNU ld gained support for new emulations fully
+# supporting the Solaris 2 ABI. Detect their presence in the linker used.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker *_sol2 emulation support" >&5
+$as_echo_n "checking linker *_sol2 emulation support... " >&6; }
+if ${gcc_cv_ld_sol2_emulation+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_ld_sol2_emulation=no
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a \
+ "$gcc_cv_gld_minor_version" -ge 21 -o \
+ "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_sol2_emulation=yes
+ fi
+ elif test x$gcc_cv_ld != x; then
+ if $gcc_cv_ld -V 2>/dev/null | sed -e '1,/Supported emulations/d;q' | \
+ grep _sol2 > /dev/null; then
+ gcc_cv_ld_sol2_emulation=yes
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_sol2_emulation" >&5
+$as_echo "$gcc_cv_ld_sol2_emulation" >&6; }
+if test x"$gcc_cv_ld_sol2_emulation" = xyes; then
+
+$as_echo "#define HAVE_LD_SOL2_EMULATION 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker --sysroot support" >&5
+$as_echo_n "checking linker --sysroot support... " >&6; }
+if ${gcc_cv_ld_sysroot+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_ld_sysroot=no
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 16 -o "$gcc_cv_gld_major_version" -gt 2 ; then
+ gcc_cv_ld_sysroot=yes
+ fi
+ elif test x$gcc_cv_ld != x; then
+ if $gcc_cv_ld --help 2>&1 | grep sysroot > /dev/null; then
+ gcc_cv_ld_sysroot=yes
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_sysroot" >&5
+$as_echo "$gcc_cv_ld_sysroot" >&6; }
+if test x"$gcc_cv_ld_sysroot" = xyes; then
+
+$as_echo "#define HAVE_LD_SYSROOT 1" >>confdefs.h
+
+fi
+
+case $target in
+*-*-solaris2*)
+ # Check for system-provided CRTs on Solaris 11.x and Solaris 12.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking system-provided CRTs on Solaris" >&5
+$as_echo_n "checking system-provided CRTs on Solaris... " >&6; }
+if ${gcc_cv_solaris_crts+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_solaris_crts=no
+ if test x$host != x$target; then
+ if test "x$with_sysroot" = xyes; then
+ target_sysroot="${test_exec_prefix}/${target_noncanonical}/sys-root"
+ else
+ target_sysroot="${with_sysroot}"
+ fi
+ fi
+ target_libdir="$target_sysroot/usr/lib"
+ # At the time they were added, gcrt1.o became a symlink for backwards
+ # compatibility on x86, while crt1.o was added on sparc, so check for that.
+ case $target in
+ i?86-*-solaris2* | x86_64-*-solaris2*)
+ if test -h "$target_libdir/gcrt1.o"; then gcc_cv_solaris_crts=yes; fi
+ ;;
+ sparc*-*-solaris2*)
+ if test -f "$target_libdir/crt1.o"; then gcc_cv_solaris_crts=yes; fi
+ ;;
+ esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_solaris_crts" >&5
+$as_echo "$gcc_cv_solaris_crts" >&6; }
+ ;;
+esac
+if test x$gcc_cv_solaris_crts = xyes; then
+
+$as_echo "#define HAVE_SOLARIS_CRTS 1" >>confdefs.h
+
+fi
+
+# Check whether --enable-libssp was given.
+if test "${enable_libssp+set}" = set; then :
+ enableval=$enable_libssp; case "${enableval}" in
+ yes|no)
+ ;;
+ *)
+ as_fn_error $? "unknown libssp setting $enableval" "$LINENO" 5
+ ;;
+esac
+fi
+
+
+# Test for stack protector support in target C library.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking __stack_chk_fail in target C library" >&5
+$as_echo_n "checking __stack_chk_fail in target C library... " >&6; }
+if ${gcc_cv_libc_provides_ssp+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_libc_provides_ssp=no
+ if test "x$enable_libssp" = "xno"; then
+ gcc_cv_libc_provides_ssp=yes
+ elif test "x$enable_libssp" = "xyes"; then
+ gcc_cv_libc_provides_ssp=no
+ else
+ case "$target" in
+ *-*-musl*)
+ # All versions of musl provide stack protector
+ gcc_cv_libc_provides_ssp=yes;;
+ *-*-linux* | *-*-kfreebsd*-gnu)
+ # glibc 2.4 and later provides __stack_chk_fail and
+ # either __stack_chk_guard, or TLS access to stack guard canary.
+
+if test $glibc_version_major -gt 2 \
+ || ( test $glibc_version_major -eq 2 && test $glibc_version_minor -ge 4 ); then :
+ gcc_cv_libc_provides_ssp=yes
+else
+
+ if test -f $target_header_dir/features.h \
+ && $EGREP '^[ ]*#[ ]*define[ ]+__GNU_LIBRARY__[ ]+([1-9][0-9]|[6-9])' \
+ $target_header_dir/features.h > /dev/null; then
+ if $EGREP '^[ ]*#[ ]*define[ ]+__UCLIBC__[ ]+1' \
+ $target_header_dir/features.h > /dev/null && \
+ test -f $target_header_dir/bits/uClibc_config.h && \
+ $EGREP '^[ ]*#[ ]*define[ ]+__UCLIBC_HAS_SSP__[ ]+1' \
+ $target_header_dir/bits/uClibc_config.h > /dev/null; then
+ gcc_cv_libc_provides_ssp=yes
+ fi
+ # all versions of Bionic support stack protector
+ elif test -f $target_header_dir/sys/cdefs.h \
+ && $EGREP '^[ ]*#[ ]*define[ ]+__BIONIC__[ ]+1' \
+ $target_header_dir/sys/cdefs.h > /dev/null; then
+ gcc_cv_libc_provides_ssp=yes
+ fi
+fi
+ ;;
+ *-*-gnu*)
+ # Avoid complicated tests (see
+ # <http://gcc.gnu.org/ml/gcc/2008-10/msg00130.html>) and for now
+ # simply assert that glibc does provide this, which is true for all
+ # realistically usable GNU/Hurd configurations.
+ # All supported versions of musl provide it as well
+ gcc_cv_libc_provides_ssp=yes;;
+ *-*-darwin* | *-*-freebsd* | *-*-netbsd*)
+ ac_fn_cxx_check_func "$LINENO" "__stack_chk_fail" "ac_cv_func___stack_chk_fail"
+if test "x$ac_cv_func___stack_chk_fail" = xyes; then :
+ gcc_cv_libc_provides_ssp=yes
+else
+ echo "no __stack_chk_fail on this target"
+fi
+
+ ;;
+ *) gcc_cv_libc_provides_ssp=no ;;
+ esac
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_libc_provides_ssp" >&5
+$as_echo "$gcc_cv_libc_provides_ssp" >&6; }
+
+if test x$gcc_cv_libc_provides_ssp = xyes; then
+
+$as_echo "#define TARGET_LIBC_PROVIDES_SSP 1" >>confdefs.h
+
+fi
+
+# Check whether --enable-default-ssp was given.
+# Check whether --enable-default-ssp was given.
+if test "${enable_default_ssp+set}" = set; then :
+ enableval=$enable_default_ssp;
+if test x$gcc_cv_libc_provides_ssp = xyes; then
+ case "$target" in
+ ia64*-*-*) enable_default_ssp=no ;;
+ *) enable_default_ssp=$enableval ;;
+ esac
+else
+ enable_default_ssp=no
+fi
+else
+ enable_default_ssp=no
+fi
+
+if test x$enable_default_ssp = xyes ; then
+
+$as_echo "#define ENABLE_DEFAULT_SSP 1" >>confdefs.h
+
+fi
+
+
+# Test for <sys/sdt.h> on the target.
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking sys/sdt.h in the target C library" >&5
+$as_echo_n "checking sys/sdt.h in the target C library... " >&6; }
+have_sys_sdt_h=no
+if test -f $target_header_dir/sys/sdt.h; then
+ have_sys_sdt_h=yes
+
+$as_echo "#define HAVE_SYS_SDT_H 1" >>confdefs.h
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_sys_sdt_h" >&5
+$as_echo "$have_sys_sdt_h" >&6; }
+
+# Check if TFmode long double should be used by default or not.
+# Some glibc targets used DFmode long double, but with glibc 2.4
+# and later they can use TFmode.
+case "$target" in
+ powerpc*-*-linux* | \
+ sparc*-*-linux* | \
+ s390*-*-linux* | \
+ alpha*-*-linux*)
+
+# Check whether --with-long-double-128 was given.
+if test "${with_long_double_128+set}" = set; then :
+ withval=$with_long_double_128; gcc_cv_target_ldbl128="$with_long_double_128"
+else
+
+ case "$target" in
+ s390*-*-linux-musl*)
+ gcc_cv_target_ldbl128=yes
+ ;;
+ powerpc*-*-linux-musl*)
+ gcc_cv_target_ldbl128=no
+ ;;
+ *)
+
+if test $glibc_version_major -gt 2 \
+ || ( test $glibc_version_major -eq 2 && test $glibc_version_minor -ge 4 ); then :
+ gcc_cv_target_ldbl128=yes
+else
+
+ gcc_cv_target_ldbl128=no
+ grep '^[ ]*#[ ]*define[ ][ ]*__LONG_DOUBLE_MATH_OPTIONAL' \
+ $target_header_dir/bits/wordsize.h > /dev/null 2>&1 \
+ && gcc_cv_target_ldbl128=yes
+
+fi
+
+ ;;
+ esac
+
+fi
+
+ ;;
+esac
+if test x$gcc_cv_target_ldbl128 = xyes; then
+
+$as_echo "#define TARGET_DEFAULT_LONG_DOUBLE_128 1" >>confdefs.h
+
+fi
+
+# Check if TFmode long double target should use the IBM extended double or IEEE
+# 128-bit floating point formats if long doubles are 128-bits long. The long
+# double type can only be switched on powerpc64 bit Linux systems where VSX is
+# supported. Other PowerPC systems do not build the IEEE 128-bit emulator in
+# libgcc.
+
+# Check whether --with-long-double-format was given.
+if test "${with_long_double_format+set}" = set; then :
+ withval=$with_long_double_format;
+case "$target:$with_long_double_format" in
+ powerpc64le-*-linux*:ieee | powerpc64le-*-linux*:ibm)
+ :
+ ;;
+ powerpc64-*-linux*:ieee | powerpc64-*-linux*:ibm)
+ # IEEE 128-bit emulation is only built on 64-bit VSX Linux systems
+ case "$with_cpu" in
+ power7 | power8 | power9 | power1*)
+ :
+ ;;
+ *)
+ as_fn_error $? "Configuration option --with-long-double-format is only \
+supported if the default cpu is power7 or newer" "$LINENO" 5
+ with_long_double_format=""
+ ;;
+ esac
+ ;;
+ powerpc64*-*-linux*:*)
+ as_fn_error $? "--with-long-double-format argument should be ibm or ieee" "$LINENO" 5
+ with_long_double_format=""
+ ;;
+ *)
+ as_fn_error $? "Configure option --with-long-double-format is only supported \
+on 64-bit PowerPC VSX Linux systems" "$LINENO" 5
+ with_long_double_format=""
+ ;;
+esac
+fi
+
+
+# Check if the target LIBC supports exporting the AT_PLATFORM and AT_HWCAP
+# values in the TCB. Currently, only GLIBC 2.23 and later support this.
+gcc_cv_libc_provides_hwcap_in_tcb=no
+case "$target" in
+ powerpc*-*-linux*)
+
+if test $glibc_version_major -gt 2 \
+ || ( test $glibc_version_major -eq 2 && test $glibc_version_minor -ge 23 ); then :
+ gcc_cv_libc_provides_hwcap_in_tcb=yes
+fi
+ ;;
+esac
+if test x$gcc_cv_libc_provides_hwcap_in_tcb = xyes; then
+
+$as_echo "#define TARGET_LIBC_PROVIDES_HWCAP_IN_TCB 1" >>confdefs.h
+
+fi
+
+# Check if the target LIBC handles PT_GNU_STACK.
+gcc_cv_libc_gnustack=unknown
+case "$target" in
+ mips*-*-linux-musl*)
+ gcc_cv_libc_gnustack=yes
+ ;;
+ mips*-*-linux*)
+
+if test $glibc_version_major -gt 2 \
+ || ( test $glibc_version_major -eq 2 && test $glibc_version_minor -ge 31 ); then :
+ gcc_cv_libc_gnustack=yes
+fi
+ ;;
+esac
+if test x$gcc_cv_libc_gnustack = xyes; then
+
+$as_echo "#define TARGET_LIBC_GNUSTACK 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dl_iterate_phdr in target C library" >&5
+$as_echo_n "checking dl_iterate_phdr in target C library... " >&6; }
+gcc_cv_target_dl_iterate_phdr=unknown
+case "$target" in
+ *-*-solaris2*)
+ # <link.h> needs both a dl_iterate_phdr declaration and support for
+ # compilation with largefile support.
+ if grep dl_iterate_phdr $target_header_dir/link.h > /dev/null 2>&1 \
+ && grep 'large file capable' $target_header_dir/link.h > /dev/null 2>&1; then
+ gcc_cv_target_dl_iterate_phdr=yes
+ else
+ gcc_cv_target_dl_iterate_phdr=no
+ fi
+ ;;
+ *-*-dragonfly* | *-*-freebsd*)
+ if grep dl_iterate_phdr $target_header_dir/sys/link_elf.h > /dev/null 2>&1; then
+ gcc_cv_target_dl_iterate_phdr=yes
+ else
+ gcc_cv_target_dl_iterate_phdr=no
+ fi
+ ;;
+ *-linux-musl*)
+ gcc_cv_target_dl_iterate_phdr=yes
+ ;;
+esac
+
+if test x$gcc_cv_target_dl_iterate_phdr = xyes; then
+
+$as_echo "#define TARGET_DL_ITERATE_PHDR 1" >>confdefs.h
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_target_dl_iterate_phdr" >&5
+$as_echo "$gcc_cv_target_dl_iterate_phdr" >&6; }
+
+# We no longer support different GC mechanisms. Emit an error if
+# the user configures with --with-gc.
+
+# Check whether --with-gc was given.
+if test "${with_gc+set}" = set; then :
+ withval=$with_gc; as_fn_error $? "Configure option --with-gc is only supported up to GCC 4.7.x" "$LINENO" 5
+fi
+
+
+# Libraries to use on the host. This will normally be set by the top
+# level Makefile. Here we simply capture the value for our Makefile.
+if test -z "${HOST_LIBS+set}"; then
+ HOST_LIBS=
+fi
+
+
+# Use the system's zlib library.
+
+ # Use the system's zlib library.
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
+
+# Check whether --with-system-zlib was given.
+if test "${with_system_zlib+set}" = set; then :
+ withval=$with_system_zlib; if test x$with_system_zlib = xyes ; then
+ zlibdir=
+ zlibinc=
+ fi
+
+fi
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
+ # Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then :
+ enableval=$enable_maintainer_mode; maintainer_mode=$enableval
+else
+ maintainer_mode=no
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $maintainer_mode" >&5
+$as_echo "$maintainer_mode" >&6; }
+
+if test "$maintainer_mode" = "yes"; then
+ MAINT=''
+else
+ MAINT='#'
+fi
+
+if test -z "$CTAGS"; then
+ CTAGS=ctags
+fi
+
+if test -z "$ETAGS"; then
+ ETAGS=etags
+fi
+
+if test -z "$CSCOPE"; then
+ CSCOPE=cscope
+fi
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to avoid linking multiple front-ends at once" >&5
+$as_echo_n "checking whether to avoid linking multiple front-ends at once... " >&6; }
+ # Check whether --enable-link-mutex was given.
+if test "${enable_link_mutex+set}" = set; then :
+ enableval=$enable_link_mutex; do_link_mutex=$enableval
+else
+ do_link_mutex=no
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $do_link_mutex" >&5
+$as_echo "$do_link_mutex" >&6; }
+
+if test "$do_link_mutex" = "yes"; then
+ DO_LINK_MUTEX=true
+else
+ DO_LINK_MUTEX=false
+fi
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to serialize linking of multiple front-ends" >&5
+$as_echo_n "checking whether to serialize linking of multiple front-ends... " >&6; }
+ # Check whether --enable-link-serialization was given.
+if test "${enable_link_serialization+set}" = set; then :
+ enableval=$enable_link_serialization; do_link_serialization=$enableval
+else
+ do_link_serialization=no
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $do_link_serialization" >&5
+$as_echo "$do_link_serialization" >&6; }
+
+case "$do_link_serialization" in
+ yes)
+ DO_LINK_SERIALIZATION=1;;
+ [1-9] | [1-9][0-9] | [1-9][0-9][0-9])
+ DO_LINK_SERIALIZATION=$do_link_serialization;;
+ no)
+ DO_LINK_SERIALIZATION=;;
+ *)
+ as_fn_error $? "bad value ${do_link_serialization} given for --enable-link-serialization" "$LINENO" 5 ;;
+esac
+
+
+# --------------
+# Language hooks
+# --------------
+
+# Make empty files to contain the specs and options for each language.
+# Then add #include lines to for a compiler that has specs and/or options.
+
+subdirs=
+lang_opt_files=
+lang_specs_files=
+lang_tree_files=
+# These (without "all_") are set in each config-lang.in.
+# `language' must be a single word so is spelled singularly.
+all_languages=
+all_compilers=
+all_outputs='Makefile'
+# List of language configure and makefile fragments.
+all_lang_configurefrags=
+all_lang_makefrags=
+# Additional files for gengtype
+all_gtfiles="$target_gtfiles"
+
+# These are the languages that are set in --enable-languages,
+# and are available in the GCC tree.
+all_selected_languages=
+
+# Add the language fragments.
+# Languages are added via two mechanisms. Some information must be
+# recorded in makefile variables, these are defined in config-lang.in.
+# We accumulate them and plug them into the main Makefile.
+# The other mechanism is a set of hooks for each of the main targets
+# like `clean', `install', etc.
+
+language_hooks="Make-hooks"
+
+for lang in ${srcdir}/*/config-lang.in
+do
+ test "$lang" = "${srcdir}/*/config-lang.in" && continue
+
+ lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
+ if test "x$lang_alias" = x
+ then
+ echo "$lang doesn't set \$language." 1>&2
+ exit 1
+ fi
+ subdir="`echo $lang | sed -e 's,^.*/\([^/]*\)/config-lang.in$,\1,'`"
+ subdirs="$subdirs $subdir"
+
+ # $gcc_subdir is where the gcc integration files are to be found
+ # for a language, both for internal compiler purposes (compiler
+ # sources implementing front-end to GCC tree converters), and for
+ # build infrastructure purposes (Make-lang.in, etc.)
+ #
+ # This will be <subdir> (relative to $srcdir) if a line like
+ # gcc_subdir="<subdir>" or gcc_subdir=<subdir>
+ # is found in <langdir>/config-lang.in, and will remain <langdir>
+ # otherwise.
+ #
+ # Except for the language alias (fetched above), the regular
+ # "config-lang.in" contents are always retrieved from $gcc_subdir,
+ # so a <langdir>/config-lang.in setting gcc_subdir typically sets
+ # only this and the language alias.
+
+ gcc_subdir=`sed -n -e 's,^gcc_subdir=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^gcc_subdir=\([^ ]*\).*$,\1,p' $lang`
+ if [ "$gcc_subdir" = "" ]; then
+ gcc_subdir="$subdir"
+ fi
+
+ case ",$enable_languages," in
+ *,$lang_alias,*)
+ all_selected_languages="$all_selected_languages $lang_alias"
+ if test -f $srcdir/$gcc_subdir/lang-specs.h; then
+ lang_specs_files="$lang_specs_files $srcdir/$gcc_subdir/lang-specs.h"
+ fi
+ ;;
+ esac
+
+ language=
+ boot_language=
+ compilers=
+ outputs=
+ gtfiles=
+ subdir_requires=
+ . ${srcdir}/$gcc_subdir/config-lang.in
+ if test "x$language" = x
+ then
+ echo "${srcdir}/$gcc_subdir/config-lang.in doesn't set \$language." 1>&2
+ exit 1
+ fi
+
+ ok=:
+ case ",$enable_languages," in
+ *,$lang_alias,*) ;;
+ *)
+ for i in $subdir_requires; do
+ test -f "${srcdir}/$i/config-lang.in" && continue
+ ok=false
+ break
+ done
+ ;;
+ esac
+ $ok || continue
+
+ all_lang_configurefrags="$all_lang_configurefrags \$(srcdir)/$gcc_subdir/config-lang.in"
+ if test "x$language" = xc && test -n "$all_lang_makefrags"; then
+ # Put c/Make-lang.in fragment first to match serialization languages order.
+ all_lang_makefrags="\$(srcdir)/$gcc_subdir/Make-lang.in $all_lang_makefrags"
+ else
+ all_lang_makefrags="$all_lang_makefrags \$(srcdir)/$gcc_subdir/Make-lang.in"
+ fi
+ if test -f $srcdir/$gcc_subdir/lang.opt; then
+ lang_opt_files="$lang_opt_files $srcdir/$gcc_subdir/lang.opt"
+ all_opt_files="$all_opt_files $srcdir/$gcc_subdir/lang.opt"
+ fi
+ if test -f $srcdir/$gcc_subdir/$subdir-tree.def; then
+ lang_tree_files="$lang_tree_files $srcdir/$gcc_subdir/$subdir-tree.def"
+ fi
+ all_languages="$all_languages $language"
+ all_compilers="$all_compilers $compilers"
+ all_outputs="$all_outputs $outputs"
+ all_gtfiles="$all_gtfiles [$subdir] $gtfiles"
+ case ",$enable_languages," in
+ *,lto,*)
+
+$as_echo "#define ENABLE_LTO 1" >>confdefs.h
+
+ enable_lto=yes
+
+ ;;
+ *) ;;
+ esac
+done
+
+check_languages=
+for language in $all_selected_languages
+do
+ check_languages="$check_languages check-$language"
+done
+
+selftest_languages=
+for language in $all_selected_languages
+do
+ selftest_languages="$selftest_languages selftest-$language"
+done
+
+# We link each language in with a set of hooks, reached indirectly via
+# lang.${target}. Only do so for selected languages.
+
+rm -f Make-hooks
+touch Make-hooks
+target_list="all.cross start.encap rest.encap tags \
+ install-common install-man install-info install-dvi install-pdf \
+ install-html dvi pdf html uninstall info man srcextra srcman srcinfo \
+ mostlyclean clean distclean maintainer-clean install-plugin"
+
+for t in $target_list
+do
+ x=
+ for lang in $all_selected_languages
+ do
+ x="$x $lang.$t"
+ done
+ echo "lang.$t: $x" >> Make-hooks
+done
+
+echo "ifeq (\$(DO_LINK_SERIALIZATION),)" >> Make-hooks
+echo "SERIAL_LIST =" >> Make-hooks
+echo else >> Make-hooks
+lang_cnt=0
+lang_list=
+prev=c
+serialization_languages=c
+for lang in $all_selected_languages
+do
+ test $lang = c && continue
+ if test $lang = lto; then
+ serialization_languages="$serialization_languages lto1 lto2"
+ else
+ serialization_languages="$serialization_languages $lang"
+ fi
+done
+for lang in $serialization_languages
+do
+ test $lang = c && continue
+ lang_cnt=`expr $lang_cnt + 1`
+ lang_list=" $prev$lang_list"
+ prev=${lang}
+done
+echo "SERIAL_LIST = \$(wordlist \$(DO_LINK_SERIALIZATION),$lang_cnt,$lang_list)" >> Make-hooks
+echo endif >> Make-hooks
+echo "SERIAL_COUNT = `expr $lang_cnt + 1`" >> Make-hooks
+echo "INDEX.c = 0" >> Make-hooks
+lang_idx=1
+for lang in $serialization_languages
+do
+ test $lang = c && continue
+ echo "$lang.prev = \$(if \$(word $lang_cnt,\$(SERIAL_LIST)),\$(\$(word $lang_cnt,\$(SERIAL_LIST)).serial))" >> Make-hooks
+ echo "INDEX.$lang = $lang_idx" >> Make-hooks
+ lang_cnt=`expr $lang_cnt - 1`
+ lang_idx=`expr $lang_idx + 1`
+done
+
+# --------
+# Option include files
+# --------
+
+${AWK} -f $srcdir/opt-include.awk $all_opt_files > option-includes.mk
+option_includes="option-includes.mk"
+
+
+# --------
+# UNSORTED
+# --------
+
+# Create .gdbinit.
+
+echo "dir ." > .gdbinit
+echo "dir ${srcdir}" >> .gdbinit
+if test x$gdb_needs_out_file_path = xyes
+then
+ echo "dir ${srcdir}/config/"`dirname ${out_file}` >> .gdbinit
+fi
+if test "x$subdirs" != x; then
+ for s in $subdirs
+ do
+ echo "dir ${srcdir}/$s" >> .gdbinit
+ done
+fi
+echo "source ${srcdir}/gdbinit.in" >> .gdbinit
+echo "python import sys; sys.path.append('${srcdir}'); import gdbhooks" >> .gdbinit
+
+# Put a breakpoint on __asan_report_error to help with debugging buffer
+# overflow.
+case "$CFLAGS" in
+*-fsanitize=address*)
+ echo "source ${srcdir}/gdbasan.in" >> .gdbinit
+ ;;
+esac
+
+gcc_tooldir='$(libsubdir)/$(libsubdir_to_prefix)$(target_noncanonical)'
+
+
+
+# Find a directory in which to install a shared libgcc.
+
+# Check whether --enable-version-specific-runtime-libs was given.
+if test "${enable_version_specific_runtime_libs+set}" = set; then :
+ enableval=$enable_version_specific_runtime_libs;
+fi
+
+
+# Substitute configuration variables
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Echo link setup.
+if test x${build} = x${host} ; then
+ if test x${host} = x${target} ; then
+ echo "Links are now set up to build a native compiler for ${target}." 1>&2
+ else
+ echo "Links are now set up to build a cross-compiler" 1>&2
+ echo " from ${host} to ${target}." 1>&2
+ fi
+else
+ if test x${host} = x${target} ; then
+ echo "Links are now set up to build (on ${build}) a native compiler" 1>&2
+ echo " for ${target}." 1>&2
+ else
+ echo "Links are now set up to build (on ${build}) a cross-compiler" 1>&2
+ echo " from ${host} to ${target}." 1>&2
+ fi
+fi
+
+
+
+
+
+
+if test "x${ISLLIBS}" != "x" ; then
+
+$as_echo "#define HAVE_isl 1" >>confdefs.h
+
+fi
+
+# Check for plugin support
+ # Check whether --enable-plugin was given.
+if test "${enable_plugin+set}" = set; then :
+ enableval=$enable_plugin; enable_plugin=$enableval
+else
+ enable_plugin=yes; default_plugin=yes
+fi
+
+
+ pluginlibs=
+ plugin_check=yes
+
+ case "${host}" in
+ *-*-mingw*)
+ # Since plugin support under MinGW is not as straightforward as on
+ # other platforms (e.g., we have to link import library, etc), we
+ # only enable it if explicitly requested.
+ if test x"$default_plugin" = x"yes"; then
+ enable_plugin=no
+ elif test x"$enable_plugin" = x"yes"; then
+ # Use make's target variable to derive import library name.
+ pluginlibs='-Wl,--export-all-symbols -Wl,--out-implib=$@.a'
+ plugin_check=no
+ fi
+ ;;
+ *-*-darwin*)
+ if test x$build = x$host; then
+ export_sym_check="nm${exeext} -g"
+ elif test x$host = x$target; then
+ export_sym_check="$gcc_cv_nm -g"
+ else
+ export_sym_check=
+ fi
+ ;;
+ *)
+ if test x$build = x$host; then
+ export_sym_check="objdump${exeext} -T"
+ elif test x$host = x$target; then
+ export_sym_check="$gcc_cv_objdump -T"
+ else
+ export_sym_check=
+ fi
+ ;;
+ esac
+
+ if test x"$enable_plugin" = x"yes" -a x"$plugin_check" = x"yes"; then
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for exported symbols" >&5
+$as_echo_n "checking for exported symbols... " >&6; }
+ if test "x$export_sym_check" != x; then
+ echo "int main() {return 0;} int foobar() {return 0;}" > conftest.c
+ ${CC} ${CFLAGS} ${LDFLAGS} conftest.c -o conftest$ac_exeext > /dev/null 2>&1
+ if $export_sym_check conftest$ac_exeext | grep foobar > /dev/null; then
+ : # No need to use a flag
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -rdynamic" >&5
+$as_echo_n "checking for -rdynamic... " >&6; }
+ ${CC} ${CFLAGS} ${LDFLAGS} -rdynamic conftest.c -o conftest$ac_exeext > /dev/null 2>&1
+ if $export_sym_check conftest$ac_exeext | grep foobar > /dev/null; then
+ plugin_rdynamic=yes
+ pluginlibs="-rdynamic"
+ else
+ plugin_rdynamic=no
+ enable_plugin=no
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $plugin_rdynamic" >&5
+$as_echo "$plugin_rdynamic" >&6; }
+ fi
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unable to check" >&5
+$as_echo "unable to check" >&6; }
+ fi
+
+ # Check -ldl
+ saved_LIBS="$LIBS"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlopen" >&5
+$as_echo_n "checking for library containing dlopen... " >&6; }
+if ${ac_cv_search_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' dl; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_cxx_try_link "$LINENO"; then :
+ ac_cv_search_dlopen=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_dlopen+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_dlopen+:} false; then :
+
+else
+ ac_cv_search_dlopen=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dlopen" >&5
+$as_echo "$ac_cv_search_dlopen" >&6; }
+ac_res=$ac_cv_search_dlopen
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+ if test x"$ac_cv_search_dlopen" = x"-ldl"; then
+ pluginlibs="$pluginlibs -ldl"
+ fi
+ LIBS="$saved_LIBS"
+
+ # Check that we can build shared objects with -fPIC -shared
+ saved_LDFLAGS="$LDFLAGS"
+ saved_CFLAGS="$CFLAGS"
+ saved_CXXFLAGS="$CXXFLAGS"
+ case "${host}" in
+ *-*-darwin*)
+ CFLAGS=`echo $CFLAGS | sed s/-mdynamic-no-pic//g`
+ CFLAGS="$CFLAGS -fPIC"
+ CXXFLAGS=`echo $CXXFLAGS | sed s/-mdynamic-no-pic//g`
+ CXXFLAGS="$CXXFLAGS -fPIC"
+ LDFLAGS="$LDFLAGS -shared -undefined dynamic_lookup"
+ ;;
+ *)
+ CFLAGS="$CFLAGS -fPIC"
+ CXXFLAGS="$CXXFLAGS -fPIC"
+ LDFLAGS="$LDFLAGS -fPIC -shared"
+ ;;
+ esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -fPIC -shared" >&5
+$as_echo_n "checking for -fPIC -shared... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+extern int X;
+int
+main ()
+{
+return X == 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }; have_pic_shared=yes
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }; have_pic_shared=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test x"$have_pic_shared" != x"yes" -o x"$ac_cv_search_dlopen" = x"no"; then
+ pluginlibs=
+ enable_plugin=no
+ fi
+ LDFLAGS="$saved_LDFLAGS"
+ CFLAGS="$saved_CFLAGS"
+ CXXFLAGS="$saved_CXXFLAGS"
+
+ # If plugin support had been requested but not available, fail.
+ if test x"$enable_plugin" = x"no" ; then
+ if test x"$default_plugin" != x"yes"; then
+ as_fn_error $? "
+ Building GCC with plugin support requires a host that supports
+ -fPIC, -shared, -ldl and -rdynamic." "$LINENO" 5
+ fi
+ fi
+ fi
+
+
+
+if test x"$enable_plugin" = x"yes"; then
+
+$as_echo "#define ENABLE_PLUGIN 1" >>confdefs.h
+
+fi
+
+
+# Enable --enable-host-shared
+# Check whether --enable-host-shared was given.
+if test "${enable_host_shared+set}" = set; then :
+ enableval=$enable_host_shared; PICFLAG=-fPIC
+else
+ PICFLAG=
+fi
+
+
+
+
+
+# Check whether --enable-libquadmath-support was given.
+if test "${enable_libquadmath_support+set}" = set; then :
+ enableval=$enable_libquadmath_support; ENABLE_LIBQUADMATH_SUPPORT=$enableval
+else
+ ENABLE_LIBQUADMATH_SUPPORT=yes
+fi
+
+if test "${ENABLE_LIBQUADMATH_SUPPORT}" != "no" ; then
+
+$as_echo "#define ENABLE_LIBQUADMATH_SUPPORT 1" >>confdefs.h
+
+fi
+
+
+# Specify what hash style to use by default.
+
+# Check whether --with-linker-hash-style was given.
+if test "${with_linker_hash_style+set}" = set; then :
+ withval=$with_linker_hash_style; case x"$withval" in
+ xsysv)
+ LINKER_HASH_STYLE=sysv
+ ;;
+ xgnu)
+ LINKER_HASH_STYLE=gnu
+ ;;
+ xboth)
+ LINKER_HASH_STYLE=both
+ ;;
+ *)
+ as_fn_error $? "$withval is an invalid option to --with-linker-hash-style" "$LINENO" 5
+ ;;
+ esac
+else
+ LINKER_HASH_STYLE=''
+fi
+
+if test x"${LINKER_HASH_STYLE}" != x; then
+
+cat >>confdefs.h <<_ACEOF
+#define LINKER_HASH_STYLE "$LINKER_HASH_STYLE"
+_ACEOF
+
+fi
+
+# Specify what should be the default of -fdiagnostics-color option.
+
+# Check whether --with-diagnostics-color was given.
+if test "${with_diagnostics_color+set}" = set; then :
+ withval=$with_diagnostics_color; case x"$withval" in
+ xnever)
+ DIAGNOSTICS_COLOR_DEFAULT=DIAGNOSTICS_COLOR_NO
+ ;;
+ xauto)
+ DIAGNOSTICS_COLOR_DEFAULT=DIAGNOSTICS_COLOR_AUTO
+ ;;
+ xauto-if-env)
+ DIAGNOSTICS_COLOR_DEFAULT=-1
+ ;;
+ xalways)
+ DIAGNOSTICS_COLOR_DEFAULT=DIAGNOSTICS_COLOR_YES
+ ;;
+ *)
+ as_fn_error $? "$withval is an invalid option to --with-diagnostics-color" "$LINENO" 5
+ ;;
+ esac
+else
+ DIAGNOSTICS_COLOR_DEFAULT=DIAGNOSTICS_COLOR_AUTO
+fi
+
+
+cat >>confdefs.h <<_ACEOF
+#define DIAGNOSTICS_COLOR_DEFAULT $DIAGNOSTICS_COLOR_DEFAULT
+_ACEOF
+
+
+# Specify what should be the default of -fdiagnostics-urls option.
+
+# Check whether --with-diagnostics-urls was given.
+if test "${with_diagnostics_urls+set}" = set; then :
+ withval=$with_diagnostics_urls; case x"$withval" in
+ xnever)
+ DIAGNOSTICS_URLS_DEFAULT=DIAGNOSTICS_URL_NO
+ ;;
+ xauto)
+ DIAGNOSTICS_URLS_DEFAULT=DIAGNOSTICS_URL_AUTO
+ ;;
+ xauto-if-env)
+ DIAGNOSTICS_URLS_DEFAULT=-1
+ ;;
+ xalways)
+ DIAGNOSTICS_URLS_DEFAULT=DIAGNOSTICS_URL_YES
+ ;;
+ *)
+ as_fn_error $? "$withval is an invalid option to --with-diagnostics-urls" "$LINENO" 5
+ ;;
+ esac
+else
+ DIAGNOSTICS_URLS_DEFAULT=DIAGNOSTICS_URL_AUTO
+fi
+
+
+cat >>confdefs.h <<_ACEOF
+#define DIAGNOSTICS_URLS_DEFAULT $DIAGNOSTICS_URLS_DEFAULT
+_ACEOF
+
+
+# Generate gcc-driver-name.h containing GCC_DRIVER_NAME for the benefit
+# of jit/jit-playback.cc.
+gcc_driver_version=`eval "${get_gcc_base_ver} $srcdir/BASE-VER"`
+echo "gcc_driver_version: ${gcc_driver_version}"
+cat > gcc-driver-name.h <<EOF
+#define GCC_DRIVER_NAME "${target_noncanonical}-gcc-${gcc_driver_version}${exeext}"
+EOF
+
+# Check whether --enable-default-pie was given.
+# Check whether --enable-default-pie was given.
+if test "${enable_default_pie+set}" = set; then :
+ enableval=$enable_default_pie; enable_default_pie=$enableval
+else
+ enable_default_pie=no
+fi
+
+if test x$enable_default_pie = xyes ; then
+
+$as_echo "#define ENABLE_DEFAULT_PIE 1" >>confdefs.h
+
+fi
+
+
+# Check if -fno-PIE works.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for -fno-PIE option" >&5
+$as_echo_n "checking for -fno-PIE option... " >&6; }
+if ${gcc_cv_c_no_fpie+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ saved_CXXFLAGS="$CXXFLAGS"
+ CXXFLAGS="$CXXFLAGS -fno-PIE"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int main(void) {return 0;}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ gcc_cv_c_no_fpie=yes
+else
+ gcc_cv_c_no_fpie=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ CXXFLAGS="$saved_CXXFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_c_no_fpie" >&5
+$as_echo "$gcc_cv_c_no_fpie" >&6; }
+if test "$gcc_cv_c_no_fpie" = "yes"; then
+ NO_PIE_CFLAGS="-fno-PIE"
+fi
+
+
+# Check if -no-pie works.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for -no-pie option" >&5
+$as_echo_n "checking for -no-pie option... " >&6; }
+if ${gcc_cv_no_pie+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ saved_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -no-pie"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int main(void) {return 0;}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ gcc_cv_no_pie=yes
+else
+ gcc_cv_no_pie=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$saved_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_no_pie" >&5
+$as_echo "$gcc_cv_no_pie" >&6; }
+if test "$gcc_cv_no_pie" = "yes"; then
+ NO_PIE_FLAG="-no-pie"
+fi
+
+
+# Enable Intel CET on Intel CET enabled host if jit is enabled.
+ # Check whether --enable-cet was given.
+if test "${enable_cet+set}" = set; then :
+ enableval=$enable_cet;
+ case "$enableval" in
+ yes|no|auto) ;;
+ *) as_fn_error $? "Unknown argument to enable/disable cet" "$LINENO" 5 ;;
+ esac
+
+else
+ enable_cet=auto
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for CET support" >&5
+$as_echo_n "checking for CET support... " >&6; }
+
+case "$host" in
+ i[34567]86-*-linux* | x86_64-*-linux*)
+ may_have_cet=yes
+ cet_save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -fcf-protection"
+ case "$enable_cet" in
+ auto)
+ # Check if target supports multi-byte NOPs
+ # and if compiler and assembler support CET.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+#if !defined(__SSE2__)
+#error target does not support multi-byte NOPs
+#else
+asm ("setssbsy");
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ enable_cet=yes
+else
+ enable_cet=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ;;
+ yes)
+ # Check if compiler and assembler support CET.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+asm ("setssbsy");
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ support_cet=yes
+else
+ support_cet=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ if test $support_cet = "no"; then
+ if test x$enable_bootstrap != xno \
+ && test -z "${with_build_subdir}" \
+ && (test ! -f ../stage_current \
+ || test `cat ../stage_current` != "stage1"); then
+ # Require CET support only for the final GCC build.
+ as_fn_error $? "compiler and assembler with CET support are required for --enable-cet" "$LINENO" 5
+ else
+ # Don't enable CET without CET support for non-bootstrap
+ # build, in stage1 nor for build support.
+ enable_cet=no
+ fi
+ fi
+ ;;
+ esac
+ CFLAGS="$cet_save_CFLAGS"
+ ;;
+ *)
+ may_have_cet=no
+ enable_cet=no
+ ;;
+esac
+
+cet_save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS -fcf-protection=none"
+cet_save_LDFLAGS="$LDFLAGS"
+LDFLAGS="$LDFLAGS -Wl,-z,ibt,-z,shstk"
+if test x$may_have_cet = xyes; then
+ # Check whether -fcf-protection=none -Wl,-z,ibt,-z,shstk work.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ may_have_cet=yes
+else
+ may_have_cet=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+
+if test x$may_have_cet = xyes; then
+ if test x$cross_compiling = xno; then
+ if test "$cross_compiling" = yes; then :
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run test program while cross compiling
+See \`config.log' for more details" "$LINENO" 5; }
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+ asm ("endbr32");
+ return 0;
+}
+
+_ACEOF
+if ac_fn_cxx_try_run "$LINENO"; then :
+ have_multi_byte_nop=yes
+else
+ have_multi_byte_nop=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+ have_cet=no
+ if test x$have_multi_byte_nop = xyes; then
+ if test "$cross_compiling" = yes; then :
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run test program while cross compiling
+See \`config.log' for more details" "$LINENO" 5; }
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+static void
+foo (void)
+{
+}
+
+static void
+__attribute__ ((noinline, noclone))
+xxx (void (*f) (void))
+{
+ f ();
+}
+
+static void
+__attribute__ ((noinline, noclone))
+bar (void)
+{
+ xxx (foo);
+}
+
+int
+main ()
+{
+ bar ();
+ return 0;
+}
+
+_ACEOF
+if ac_fn_cxx_try_run "$LINENO"; then :
+ have_cet=no
+else
+ have_cet=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+ fi
+ if test x$enable_cet = xno -a x$have_cet = xyes; then
+ as_fn_error $? "Intel CET must be enabled on Intel CET enabled host" "$LINENO" 5
+ fi
+ fi
+else
+ # Enable CET in cross compiler if possible so that it will run on both
+ # CET and non-CET hosts.
+ have_cet=yes
+fi
+if test x$enable_cet = xyes; then
+ CET_HOST_FLAGS="-fcf-protection"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+CFLAGS="$cet_save_CFLAGS"
+LDFLAGS="$cet_save_LDFLAGS"
+
+case x$enable_languages in
+*jit*)
+ ;;
+*)
+ CET_HOST_FLAGS=
+ ;;
+esac
+
+
+# Check linker supports '-z bndplt'
+ld_bndplt_support=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker -z bndplt option" >&5
+$as_echo_n "checking linker -z bndplt option... " >&6; }
+if test x"$ld_is_gold" = xno; then
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 25 -o "$gcc_cv_gld_major_version" -gt 2; then
+ ld_bndplt_support=yes
+ fi
+ elif test x$gcc_cv_ld != x; then
+ # Check if linker supports -a bndplt option
+ if $gcc_cv_ld --help 2>&1 | grep -- '-z bndplt' > /dev/null; then
+ ld_bndplt_support=yes
+ fi
+ fi
+fi
+if test x"$ld_bndplt_support" = xyes; then
+
+$as_echo "#define HAVE_LD_BNDPLT_SUPPORT 1" >>confdefs.h
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_bndplt_support" >&5
+$as_echo "$ld_bndplt_support" >&6; }
+
+# Check linker supports '--push-state'/'--pop-state'
+ld_pushpopstate_support=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker --push-state/--pop-state options" >&5
+$as_echo_n "checking linker --push-state/--pop-state options... " >&6; }
+if test x"$ld_is_gold" = xno; then
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 25 -o "$gcc_cv_gld_major_version" -gt 2; then
+ ld_pushpopstate_support=yes
+ fi
+ elif test x$gcc_cv_ld != x; then
+ # Check if linker supports --push-state/--pop-state options
+ if $gcc_cv_ld --help 2>&1 | grep -- '--push-state' > /dev/null; then
+ ld_pushpopstate_support=yes
+ fi
+ fi
+fi
+if test x"$ld_pushpopstate_support" = xyes; then
+
+$as_echo "#define HAVE_LD_PUSHPOPSTATE_SUPPORT 1" >>confdefs.h
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_pushpopstate_support" >&5
+$as_echo "$ld_pushpopstate_support" >&6; }
+
+# On s390, float_t has historically been statically defined as double for no
+# good reason. To comply with the C standard in the light of this definition,
+# gcc has evaluated float expressions in double precision when in
+# standards-compatible mode or when given -fexcess-precision=standard. To enable
+# a smooth transition towards the new model used by most architectures, where
+# gcc describes its behavior via the macro __FLT_EVAL_METHOD__ and glibc derives
+# float_t from that, this behavior can be configured with
+# --enable-s390-excess-float-precision. When given as enabled, that flag selects
+# the old model. When omitted, native builds and cross compiles that have target
+# libc headers will detect whether libc clamps float_t to double and in that
+# case maintain the old model. Otherwise, they will default to the new model.
+# Check whether --enable-s390-excess-float-precision was given.
+if test "${enable_s390_excess_float_precision+set}" = set; then :
+ enableval=$enable_s390_excess_float_precision;
+else
+ enable_s390_excess_float_precision=auto
+fi
+
+
+case $target in
+ s390*-linux*)
+ if test x"$enable_s390_excess_float_precision" = xauto; then
+ # Can we autodetect the behavior of the target libc?
+ if test "$target" = "$host" -a "$host" = "$build"; then
+ enable_s390_excess_float_precision=autodetect
+ elif test "x$with_headers" != xno; then
+ # cross build. are target headers available?
+ # carefully coerce the build-system compiler to use target headers
+ saved_CXXFLAGS="$CXXFLAGS"
+ fixed_XGCC_FLAGS_FOR_TARGET=`echo "$XGCC_FLAGS_FOR_TARGET" | sed 's/-B/-idirafter/g'`
+ CROSS_TEST_CXXFLAGS="-nostdinc $fixed_XGCC_FLAGS_FOR_TARGET"
+ CXXFLAGS="$CROSS_TEST_CXXFLAGS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <math.h>
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ enable_s390_excess_float_precision=autodetect
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ CXXFLAGS="$saved_CXXFLAGS"
+ fi
+
+ if test x"$enable_s390_excess_float_precision" = xautodetect; then
+ saved_CXXFLAGS="$CXXFLAGS"
+ if ! test "$target" = "$host" -a "$host" = "$build"; then
+ CXXFLAGS="$CROSS_TEST_CXXFLAGS"
+ unset CROSS_TEST_CXXFLAGS
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for glibc clamping float_t to double" >&5
+$as_echo_n "checking for glibc clamping float_t to double... " >&6; }
+if ${gcc_cv_float_t_clamped_to_double+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#define __FLT_EVAL_METHOD__ 0
+#include <math.h>
+int dummy[sizeof(float_t) == sizeof(double) ? 1 : -1];
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ gcc_cv_float_t_clamped_to_double=yes
+else
+ gcc_cv_float_t_clamped_to_double=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_float_t_clamped_to_double" >&5
+$as_echo "$gcc_cv_float_t_clamped_to_double" >&6; }
+ CXXFLAGS="$saved_CXXFLAGS"
+ enable_s390_excess_float_precision="$gcc_cv_float_t_clamped_to_double"
+ else
+ # no way to detect behavior of target libc, default to new model
+ enable_s390_excess_float_precision=no
+ fi
+ fi
+
+
+ if test x"$enable_s390_excess_float_precision" = xyes; then
+
+$as_echo "#define ENABLE_S390_EXCESS_FLOAT_PRECISION 1" >>confdefs.h
+
+ fi
+ ;;
+esac
+
+# Configure the subdirectories
+# AC_CONFIG_SUBDIRS($subdirs)
+
+# Create the Makefile
+# and configure language subdirectories
+ac_config_files="$ac_config_files $all_outputs"
+
+
+ac_config_commands="$ac_config_commands default"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ if test "x$cache_file" != "x/dev/null"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+ if test ! -f "$cache_file" || test -h "$cache_file"; then
+ cat confcache >"$cache_file"
+ else
+ case $cache_file in #(
+ */* | ?:*)
+ mv -f confcache "$cache_file"$$ &&
+ mv -f "$cache_file"$$ "$cache_file" ;; #(
+ *)
+ mv -f confcache "$cache_file" ;;
+ esac
+ fi
+ fi
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -pR'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -pR'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -pR'
+ fi
+else
+ as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by $as_me, which was
+generated by GNU Autoconf 2.69. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_links="$ac_config_links"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
+ -q, --quiet, --silent
+ do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration links:
+$config_links
+
+Configuration commands:
+$config_commands
+
+Report bugs to the package provider."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+config.status
+configured by $0, generated by GNU Autoconf 2.69,
+ with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=?*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ --*=)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ $as_echo "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ $as_echo "$ac_cs_config"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ '') as_fn_error $? "missing file argument" ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+ as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+ --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+ *) as_fn_append ac_config_targets " $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+ set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
+ export CONFIG_SHELL
+ exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+ac_aux_dir=$ac_aux_dir DEPDIR=$DEPDIR
+subdirs="$subdirs" ac_aux_dir=$ac_aux_dir DEPDIR=$DEPDIR
+subdirs='$subdirs'
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "auto-host.h") CONFIG_HEADERS="$CONFIG_HEADERS auto-host.h:config.in" ;;
+ "depdir") CONFIG_COMMANDS="$CONFIG_COMMANDS depdir" ;;
+ "gccdepdir") CONFIG_COMMANDS="$CONFIG_COMMANDS gccdepdir" ;;
+ "as") CONFIG_FILES="$CONFIG_FILES as:exec-tool.in" ;;
+ "collect-ld") CONFIG_FILES="$CONFIG_FILES collect-ld:exec-tool.in" ;;
+ "nm") CONFIG_FILES="$CONFIG_FILES nm:exec-tool.in" ;;
+ "dsymutil") CONFIG_FILES="$CONFIG_FILES dsymutil:exec-tool.in" ;;
+ "clearcap.map") CONFIG_LINKS="$CONFIG_LINKS clearcap.map:${srcdir}/config/$clearcap_map" ;;
+ "$all_outputs") CONFIG_FILES="$CONFIG_FILES $all_outputs" ;;
+ "default") CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
+
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_LINKS+set}" = set || CONFIG_LINKS=$config_links
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp= ac_tmp=
+ trap 'exit_status=$?
+ : "${ac_tmp:=$tmp}"
+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+ trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+if $AWK 'BEGIN { getline <"/dev/null" }' </dev/null 2>/dev/null; then
+ ac_cs_awk_getline=:
+ ac_cs_awk_pipe_init=
+ ac_cs_awk_read_file='
+ while ((getline aline < (F[key])) > 0)
+ print(aline)
+ close(F[key])'
+ ac_cs_awk_pipe_fini=
+else
+ ac_cs_awk_getline=false
+ ac_cs_awk_pipe_init="print \"cat <<'|#_!!_#|' &&\""
+ ac_cs_awk_read_file='
+ print "|#_!!_#|"
+ print "cat " F[key] " &&"
+ '$ac_cs_awk_pipe_init
+ # The final `:' finishes the AND list.
+ ac_cs_awk_pipe_fini='END { print "|#_!!_#|"; print ":" }'
+fi
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+# Create commands to substitute file output variables.
+{
+ echo "cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1" &&
+ echo 'cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&' &&
+ echo "$ac_subst_files" | sed 's/.*/F["&"]="$&"/' &&
+ echo "_ACAWK" &&
+ echo "_ACEOF"
+} >conf$$files.sh &&
+. ./conf$$files.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+rm -f conf$$files.sh
+
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+ N
+ s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = ""
+ \$ac_cs_awk_pipe_init
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+ if (nfields == 3 && !substed) {
+ key = field[2]
+ if (F[key] != "" && line ~ /^[ ]*@.*@[ ]*$/) {
+ \$ac_cs_awk_read_file
+ next
+ }
+ }
+ print line
+}
+\$ac_cs_awk_pipe_fini
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
+h
+s///
+s/^/:/
+s/[ ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[ ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+ ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+ if test -z "$ac_tt"; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any. Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[ ]*#[ ]*define[ ][ ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ for (key in D) D_is_set[key] = 1
+ FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+ line = \$ 0
+ split(line, arg, " ")
+ if (arg[1] == "#") {
+ defundef = arg[2]
+ mac1 = arg[3]
+ } else {
+ defundef = substr(arg[1], 2)
+ mac1 = arg[2]
+ }
+ split(mac1, mac2, "(") #)
+ macro = mac2[1]
+ prefix = substr(line, 1, index(line, defundef) - 1)
+ if (D_is_set[macro]) {
+ # Preserve the white space surrounding the "#".
+ print prefix "define", macro P[macro] D[macro]
+ next
+ } else {
+ # Replace #undef with comments. This is necessary, for example,
+ # in the case of _POSIX_SOURCE, which is predefined and required
+ # on some systems where configure will not decide to define it.
+ if (defundef == "undef") {
+ print "/*", prefix defundef, macro, "*/"
+ next
+ }
+ }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :L $CONFIG_LINKS :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$ac_tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$ac_tmp/stdin" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" |
+if $ac_cs_awk_getline; then
+ $AWK -f "$ac_tmp/subs.awk"
+else
+ $AWK -f "$ac_tmp/subs.awk" | $SHELL
+fi \
+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
+ "$ac_tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&2;}
+
+ rm -f "$ac_tmp/stdin"
+ case $ac_file in
+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+ esac \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
+ if test x"$ac_file" != x-; then
+ {
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+ } >"$ac_tmp/config.h" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ rm -f "$ac_file"
+ mv "$ac_tmp/config.h" "$ac_file" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ fi
+ else
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+ || as_fn_error $? "could not create -" "$LINENO" 5
+ fi
+ ;;
+ :L)
+ #
+ # CONFIG_LINK
+ #
+
+ if test "$ac_source" = "$ac_file" && test "$srcdir" = '.'; then
+ :
+ else
+ # Prefer the file from the source tree if names are identical.
+ if test "$ac_source" = "$ac_file" || test ! -r "$ac_source"; then
+ ac_source=$srcdir/$ac_source
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: linking $ac_source to $ac_file" >&5
+$as_echo "$as_me: linking $ac_source to $ac_file" >&6;}
+
+ if test ! -r "$ac_source"; then
+ as_fn_error $? "$ac_source: file not found" "$LINENO" 5
+ fi
+ rm -f "$ac_file"
+
+ # Try a relative symlink, then a hard link, then a copy.
+ case $ac_source in
+ [\\/$]* | ?:[\\/]* ) ac_rel_source=$ac_source ;;
+ *) ac_rel_source=$ac_top_build_prefix$ac_source ;;
+ esac
+ ln -s "$ac_rel_source" "$ac_file" 2>/dev/null ||
+ ln "$ac_source" "$ac_file" 2>/dev/null ||
+ cp -p "$ac_source" "$ac_file" ||
+ as_fn_error $? "cannot link or copy $ac_source to $ac_file" "$LINENO" 5
+ fi
+ ;;
+ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+
+ case $ac_file$ac_mode in
+ "depdir":C) $SHELL $ac_aux_dir/mkinstalldirs $DEPDIR ;;
+ "gccdepdir":C)
+ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/mkinstalldirs build/$DEPDIR
+ for lang in $subdirs c-family common analyzer rtl-ssa
+ do
+ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/mkinstalldirs $lang/$DEPDIR
+ done ;;
+ "as":F) chmod +x as ;;
+ "collect-ld":F) chmod +x collect-ld ;;
+ "nm":F) chmod +x nm ;;
+ "dsymutil":F) chmod +x dsymutil ;;
+ "default":C)
+case ${CONFIG_HEADERS} in
+ *auto-host.h:config.in*)
+ echo > cstamp-h ;;
+esac
+# Make sure all the subdirs exist.
+for d in $subdirs doc build common c-family
+do
+ test -d $d || mkdir $d
+done
+ ;;
+
+ esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
+
Property changes on: gcc/configure
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: gcc/configure.ac
===================================================================
--- gcc/configure.ac (nonexistent)
+++ gcc/configure.ac (revision 5)
@@ -0,0 +1,7824 @@
+# configure.ac for GCC
+# Process this file with autoconf to generate a configuration script.
+
+# Copyright (C) 1997-2022 Free Software Foundation, Inc.
+
+#This file is part of GCC.
+
+#GCC is free software; you can redistribute it and/or modify it under
+#the terms of the GNU General Public License as published by the Free
+#Software Foundation; either version 3, or (at your option) any later
+#version.
+
+#GCC is distributed in the hope that it will be useful, but WITHOUT
+#ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+#FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+#for more details.
+
+#You should have received a copy of the GNU General Public License
+#along with GCC; see the file COPYING3. If not see
+#<http://www.gnu.org/licenses/>.
+
+# --------------------------------
+# Initialization and sanity checks
+# --------------------------------
+
+AC_INIT
+AC_CONFIG_SRCDIR(tree.cc)
+AC_CONFIG_HEADER(auto-host.h:config.in)
+
+gcc_version=`cat $srcdir/BASE-VER`
+
+# Determine the host, build, and target systems
+AC_CANONICAL_BUILD
+AC_CANONICAL_HOST
+AC_CANONICAL_TARGET
+
+# Determine the noncanonical host name, for Ada.
+ACX_NONCANONICAL_HOST
+
+# Determine the noncanonical target name, for directory use.
+ACX_NONCANONICAL_TARGET
+
+# Used for constructing correct paths for offload compilers.
+real_target_noncanonical=${target_noncanonical}
+accel_dir_suffix=
+
+# Determine the target- and build-specific subdirectories
+GCC_TOPLEV_SUBDIRS
+
+# Set program_transform_name
+AC_ARG_PROGRAM
+
+# Check for bogus environment variables.
+# Test if LIBRARY_PATH contains the notation for the current directory
+# since this would lead to problems installing/building glibc.
+# LIBRARY_PATH contains the current directory if one of the following
+# is true:
+# - one of the terminals (":" and ";") is the first or last sign
+# - two terminals occur directly after each other
+# - the path contains an element with a dot in it
+AC_MSG_CHECKING(LIBRARY_PATH variable)
+changequote(,)dnl
+case ${LIBRARY_PATH} in
+ [:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
+ library_path_setting="contains current directory"
+ ;;
+ *)
+ library_path_setting="ok"
+ ;;
+esac
+changequote([,])dnl
+AC_MSG_RESULT($library_path_setting)
+if test "$library_path_setting" != "ok"; then
+AC_MSG_ERROR([
+*** LIBRARY_PATH shouldn't contain the current directory when
+*** building gcc. Please change the environment variable
+*** and run configure again.])
+fi
+
+# Test if GCC_EXEC_PREFIX contains the notation for the current directory
+# since this would lead to problems installing/building glibc.
+# GCC_EXEC_PREFIX contains the current directory if one of the following
+# is true:
+# - one of the terminals (":" and ";") is the first or last sign
+# - two terminals occur directly after each other
+# - the path contains an element with a dot in it
+AC_MSG_CHECKING(GCC_EXEC_PREFIX variable)
+changequote(,)dnl
+case ${GCC_EXEC_PREFIX} in
+ [:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
+ gcc_exec_prefix_setting="contains current directory"
+ ;;
+ *)
+ gcc_exec_prefix_setting="ok"
+ ;;
+esac
+changequote([,])dnl
+AC_MSG_RESULT($gcc_exec_prefix_setting)
+if test "$gcc_exec_prefix_setting" != "ok"; then
+AC_MSG_ERROR([
+*** GCC_EXEC_PREFIX shouldn't contain the current directory when
+*** building gcc. Please change the environment variable
+*** and run configure again.])
+fi
+
+# -----------
+# Directories
+# -----------
+
+# Specify the local prefix
+local_prefix=
+AC_ARG_WITH(local-prefix,
+[AS_HELP_STRING([--with-local-prefix=DIR],
+ [specifies directory to put local include])],
+[case "${withval}" in
+yes) AC_MSG_ERROR(bad value ${withval} given for local include directory prefix) ;;
+no) ;;
+*) local_prefix=$with_local_prefix ;;
+esac])
+
+# Default local prefix if it is empty
+if test x$local_prefix = x; then
+ local_prefix=/usr/local
+fi
+
+AC_ARG_WITH([native-system-header-dir],
+ [ --with-native-system-header-dir=dir
+ use dir as the directory to look for standard
+ system header files in. Defaults to /usr/include.],
+[
+ case ${with_native_system_header_dir} in
+ yes|no) AC_MSG_ERROR([bad value ${withval} given for --with-native-system-header-dir]) ;;
+ /* | [[A-Za-z]]:[[\\/]]*) ;;
+ *) AC_MSG_ERROR([--with-native-system-header-dir argument ${withval} must be an absolute directory]) ;;
+ esac
+ configured_native_system_header_dir="${withval}"
+], [configured_native_system_header_dir=])
+
+AC_ARG_WITH(build-sysroot,
+ [AS_HELP_STRING([--with-build-sysroot=sysroot],
+ [use sysroot as the system root during the build])],
+ [if test x"$withval" != x ; then
+ SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval"
+ fi],
+ [SYSROOT_CFLAGS_FOR_TARGET=])
+AC_SUBST(SYSROOT_CFLAGS_FOR_TARGET)
+
+if test "x$prefix" = xNONE; then
+ test_prefix=/usr/local
+else
+ test_prefix=$prefix
+fi
+if test "x$exec_prefix" = xNONE; then
+ test_exec_prefix=$test_prefix
+else
+ test_exec_prefix=$exec_prefix
+fi
+
+AC_ARG_WITH(sysroot,
+[AS_HELP_STRING([[--with-sysroot[=DIR]]],
+ [search for usr/lib, usr/include, et al, within DIR])],
+[
+ case ${with_sysroot} in
+ /) ;;
+ */) with_sysroot=`echo $with_sysroot | sed 's,/$,,'` ;;
+ esac
+ case ${with_sysroot} in
+ yes) TARGET_SYSTEM_ROOT='${exec_prefix}/${target_noncanonical}/sys-root' ;;
+ *) TARGET_SYSTEM_ROOT=$with_sysroot ;;
+ esac
+
+ TARGET_SYSTEM_ROOT_DEFINE='-DTARGET_SYSTEM_ROOT=\"$(TARGET_SYSTEM_ROOT)\"'
+ CROSS_SYSTEM_HEADER_DIR='$(TARGET_SYSTEM_ROOT)$${sysroot_headers_suffix}$(NATIVE_SYSTEM_HEADER_DIR)'
+
+ case ${TARGET_SYSTEM_ROOT} in
+ "${test_prefix}"|"${test_prefix}/"*|\
+ "${test_exec_prefix}"|"${test_exec_prefix}/"*|\
+ '${prefix}'|'${prefix}/'*|\
+ '${exec_prefix}'|'${exec_prefix}/'*)
+ t="$TARGET_SYSTEM_ROOT_DEFINE -DTARGET_SYSTEM_ROOT_RELOCATABLE"
+ TARGET_SYSTEM_ROOT_DEFINE="$t"
+ ;;
+ esac
+], [
+ TARGET_SYSTEM_ROOT=
+ TARGET_SYSTEM_ROOT_DEFINE=
+ CROSS_SYSTEM_HEADER_DIR='$(gcc_tooldir)/sys-include'
+])
+AC_SUBST(TARGET_SYSTEM_ROOT)
+AC_SUBST(TARGET_SYSTEM_ROOT_DEFINE)
+AC_SUBST(CROSS_SYSTEM_HEADER_DIR)
+
+# Don't set gcc_gxx_include_dir to gxx_include_dir since that's only
+# passed in by the toplevel make and thus we'd get different behavior
+# depending on where we built the sources.
+gcc_gxx_include_dir=
+# Specify the g++ header file directory
+AC_ARG_WITH(gxx-include-dir,
+[AS_HELP_STRING([--with-gxx-include-dir=DIR],
+ [specifies directory to put g++ header files])],
+[case "${withval}" in
+yes) AC_MSG_ERROR(bad value ${withval} given for g++ include directory) ;;
+no) ;;
+*) gcc_gxx_include_dir=$with_gxx_include_dir ;;
+esac])
+
+# If both --with-sysroot and --with-gxx-include-dir are passed, we interpolate
+# the former in the latter and, upon success, compute gcc_gxx_include_dir as
+# relative to the sysroot.
+gcc_gxx_include_dir_add_sysroot=0
+
+# This logic must match libstdc++-v3/acinclude.m4:GLIBCXX_EXPORT_INSTALL_INFO.
+if test x${gcc_gxx_include_dir} = x; then
+ if test x${enable_version_specific_runtime_libs} = xyes; then
+ gcc_gxx_include_dir='${libsubdir}/include/c++'
+ else
+ libstdcxx_incdir='include/c++/$(version)'
+ if test x$host != x$target; then
+ libstdcxx_incdir="$target_alias/$libstdcxx_incdir"
+ fi
+ gcc_gxx_include_dir="\$(libsubdir)/\$(libsubdir_to_prefix)$libstdcxx_incdir"
+ fi
+elif test "${with_sysroot+set}" = set; then
+ gcc_gxx_without_sysroot=`expr "${gcc_gxx_include_dir}" : "${with_sysroot}"'\(.*\)'`
+ if test "${gcc_gxx_without_sysroot}"; then
+ gcc_gxx_include_dir="${gcc_gxx_without_sysroot}"
+ gcc_gxx_include_dir_add_sysroot=1
+ fi
+fi
+
+# Configuration for an alternate set of C++ headers.
+gcc_gxx_libcxx_include_dir=
+# Specify the alternate g++ header file directory
+AC_ARG_WITH(gxx-libcxx-include-dir,
+[AS_HELP_STRING([--with-gxx-libcxx-include-dir=DIR],
+ [specifies directory to find libc++ header files])],
+[case "${withval}" in
+yes) AC_MSG_ERROR(bad value ${withval} given for libc++ include directory) ;;
+no) ;;
+*) gcc_gxx_libcxx_include_dir=$with_gxx_libcxx_include_dir ;;
+esac])
+
+# If both --with-sysroot and --with-gxx-libcxx-include-dir are passed, we
+# check to see if the latter starts with the former and, upon success, compute
+# gcc_gxx_libcxx_include_dir as relative to the sysroot.
+gcc_gxx_libcxx_include_dir_add_sysroot=0
+
+if test x${gcc_gxx_libcxx_include_dir} != x; then
+ AC_DEFINE(ENABLE_STDLIB_OPTION, 1,
+ [Define if the -stdlib= option should be enabled.])
+else
+ AC_DEFINE(ENABLE_STDLIB_OPTION, 0)
+fi
+# ??? This logic must match libstdc++-v3/acinclude.m4:GLIBCXX_EXPORT_INSTALL_INFO.
+if test x${gcc_gxx_libcxx_include_dir} = x; then
+ if test x${enable_version_specific_runtime_libs} = xyes; then
+ gcc_gxx_libcxx_include_dir='${libsubdir}/libc++_include/c++/v1'
+ else
+ libcxx_incdir='libc++_include/c++/$(version)/v1'
+ if test x$host != x$target; then
+ libcxx_incdir="$target_alias/$libcxx_incdir"
+ fi
+ gcc_gxx_libcxx_include_dir="\$(libsubdir)/\$(libsubdir_to_prefix)$libcxx_incdir"
+ fi
+elif test "${with_sysroot+set}" = set; then
+ gcc_gxx_libcxx_without_sysroot=`expr "${gcc_gxx_libcxx_include_dir}" : "${with_sysroot}"'\(.*\)'`
+ if test "${gcc_gxx_libcxx_without_sysroot}"; then
+ gcc_gxx_libcxx_include_dir="${gcc_gxx_libcxx_without_sysroot}"
+ gcc_gxx_libcxx_include_dir_add_sysroot=1
+ fi
+fi
+
+AC_ARG_WITH(cpp_install_dir,
+[AC_HELP_STRING([--with-cpp-install-dir=DIR],
+ [install the user visible C preprocessor in DIR
+ (relative to PREFIX) as well as PREFIX/bin])],
+[if test x$withval = xyes; then
+ AC_MSG_ERROR([option --with-cpp-install-dir requires an argument])
+elif test x$withval != xno; then
+ cpp_install_dir=$withval
+fi])
+
+# We would like to our source tree to be readonly. However when releases or
+# pre-releases are generated, the flex/bison generated files as well as the
+# various formats of manuals need to be included along with the rest of the
+# sources. Therefore we have --enable-generated-files-in-srcdir to do
+# just that.
+
+AC_MSG_CHECKING([whether to place generated files in the source directory])
+ dnl generated-files-in-srcdir is disabled by default
+ AC_ARG_ENABLE(generated-files-in-srcdir,
+ [AS_HELP_STRING([--enable-generated-files-in-srcdir],
+ [put copies of generated files in source dir
+ intended for creating source tarballs for users
+ without texinfo bison or flex])],
+ generated_files_in_srcdir=$enableval,
+ generated_files_in_srcdir=no)
+
+AC_MSG_RESULT($generated_files_in_srcdir)
+
+if test "$generated_files_in_srcdir" = "yes"; then
+ GENINSRC=''
+else
+ GENINSRC='#'
+fi
+AC_SUBST(GENINSRC)
+
+# -------------------
+# Find default linker
+# -------------------
+
+# With GNU ld
+AC_ARG_WITH(gnu-ld,
+[AS_HELP_STRING([--with-gnu-ld], [arrange to work with GNU ld])],
+gnu_ld_flag="$with_gnu_ld",
+gnu_ld_flag=no)
+
+case $target in
+ *darwin*)
+ ld64_flag=yes # Darwin can only use a ld64-compatible linker.
+ dsymutil_flag=yes # Darwin uses dsymutil to link debug.
+ ;;
+ *)
+ ld64_flag=no
+ dsymutil_flag=no
+ ;;
+esac
+
+# With pre-defined ld
+AC_ARG_WITH(ld,
+[AS_HELP_STRING([--with-ld], [arrange to use the specified ld (full pathname)])],
+DEFAULT_LINKER="$with_ld")
+if test x"${DEFAULT_LINKER+set}" = x"set"; then
+ if test ! -x "$DEFAULT_LINKER"; then
+ AC_MSG_ERROR([cannot execute: $DEFAULT_LINKER: check --with-ld or env. var. DEFAULT_LINKER])
+ elif $DEFAULT_LINKER -v < /dev/null 2>&1 | grep GNU > /dev/null; then
+ gnu_ld_flag=yes
+ elif $DEFAULT_LINKER -v < /dev/null 2>&1 | grep ld64- > /dev/null; then
+ ld64_flag=yes
+ fi
+ AC_DEFINE_UNQUOTED(DEFAULT_LINKER,"$DEFAULT_LINKER",
+ [Define to enable the use of a default linker.])
+fi
+
+AC_MSG_CHECKING([whether a default linker was specified])
+if test x"${DEFAULT_LINKER+set}" = x"set"; then
+ if test x"$gnu_ld_flag" = x"no"; then
+ AC_MSG_RESULT([yes ($DEFAULT_LINKER)])
+ else
+ AC_MSG_RESULT([yes ($DEFAULT_LINKER - GNU ld)])
+ fi
+else
+ AC_MSG_RESULT(no)
+fi
+
+# With demangler in GNU ld
+AC_ARG_WITH(demangler-in-ld,
+[AS_HELP_STRING([--with-demangler-in-ld], [try to use demangler in GNU ld])],
+demangler_in_ld="$with_demangler_in_ld",
+demangler_in_ld=yes)
+
+# Allow the user to specify a dsymutil executable (used on Darwin only, so far)
+AC_ARG_WITH(dsymutil,
+[AS_HELP_STRING([--with-dsymutil], [arrange to use the specified dsymutil (full pathname)])],
+DEFAULT_DSYMUTIL="$with_dsymutil")
+
+dsymutil_vers=
+if test x"${DEFAULT_DSYMUTIL+set}" = x"set"; then
+ if test ! -x "$DEFAULT_DSYMUTIL"; then
+ AC_MSG_ERROR([cannot execute: $DEFAULT_DSYMUTIL: check --with-dsymutil or env. var. DEFAULT_DSYMUTIL])
+ else
+ if dsymutil_vers=`$DEFAULT_DSYMUTIL -v /dev/null 2>&1`; then
+ dsymutil_flag=yes
+ fi
+ fi
+ AC_DEFINE_UNQUOTED(DEFAULT_DSYMUTIL,"$DEFAULT_DSYMUTIL",
+ [Define to enable the use of a default debug linker.])
+fi
+
+AC_MSG_CHECKING([whether a default dsymutil was specified])
+if test x"${DEFAULT_DSYMUTIL+set}" = x"set"; then
+ AC_MSG_RESULT([yes ($DEFAULT_DSYMUTIL)])
+else
+ AC_MSG_RESULT(no)
+fi
+
+# ----------------------
+# Find default assembler
+# ----------------------
+
+# With GNU as
+AC_ARG_WITH(gnu-as,
+[AS_HELP_STRING([--with-gnu-as], [arrange to work with GNU as])],
+gas_flag="$with_gnu_as",
+gas_flag=no)
+
+AC_ARG_WITH(as,
+[AS_HELP_STRING([--with-as], [arrange to use the specified as (full pathname)])],
+DEFAULT_ASSEMBLER="$with_as")
+if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
+ if test ! -x "$DEFAULT_ASSEMBLER"; then
+ AC_MSG_ERROR([cannot execute: $DEFAULT_ASSEMBLER: check --with-as or env. var. DEFAULT_ASSEMBLER])
+ elif $DEFAULT_ASSEMBLER -v < /dev/null 2>&1 | grep GNU > /dev/null; then
+ gas_flag=yes
+ fi
+ AC_DEFINE_UNQUOTED(DEFAULT_ASSEMBLER,"$DEFAULT_ASSEMBLER",
+ [Define to enable the use of a default assembler.])
+fi
+
+AC_MSG_CHECKING([whether a default assembler was specified])
+if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
+ if test x"$gas_flag" = x"no"; then
+ AC_MSG_RESULT([yes ($DEFAULT_ASSEMBLER)])
+ else
+ AC_MSG_RESULT([yes ($DEFAULT_ASSEMBLER - GNU as)])
+ fi
+else
+ AC_MSG_RESULT(no)
+fi
+
+# ---------------
+# Find C compiler
+# ---------------
+
+# If a non-executable a.out is present (e.g. created by GNU as above even if
+# invoked with -v only), the IRIX 6 native ld just overwrites the existing
+# file, even when creating an executable, so an execution test fails.
+# Remove possible default executable files to avoid this.
+#
+# FIXME: This really belongs into AC_PROG_CC and can be removed once
+# Autoconf includes it.
+rm -f a.out a.exe b.out
+
+# Find the native compiler
+AC_PROG_CC
+AC_PROG_CXX
+ACX_PROG_GNAT([-I"$srcdir"/ada/libgnat])
+ACX_PROG_GDC([-I"$srcdir"/d])
+
+# Do configure tests with the C++ compiler, since that's what we build with.
+AC_LANG(C++)
+
+# Remove the -O2: for historical reasons, unless bootstrapping we prefer
+# optimizations to be activated explicitly by the toplevel.
+case "$CC" in
+ */prev-gcc/xgcc*) ;;
+ *) CFLAGS=`echo "$CFLAGS " | sed -e "s/-Ofast[[ ]]//" -e "s/-O[[gs]][[ ]]//" -e "s/-O[[0-9]]*[[ ]]//" `
+ CXXFLAGS=`echo "$CXXFLAGS " | sed -e "s/-Ofast[[ ]]//" -e "s/-O[[gs]][[ ]]//" -e "s/-O[[0-9]]*[[ ]]//" ` ;;
+esac
+AC_SUBST(CFLAGS)
+AC_SUBST(CXXFLAGS)
+AC_SUBST(GDCFLAGS)
+
+# Determine PICFLAG for target gnatlib.
+GCC_PICFLAG_FOR_TARGET
+AC_SUBST(PICFLAG_FOR_TARGET)
+
+# -------------------------
+# Check C compiler features
+# -------------------------
+
+AC_USE_SYSTEM_EXTENSIONS
+
+AC_PROG_CPP
+AC_C_INLINE
+
+AC_SYS_LARGEFILE
+AC_CHECK_SIZEOF(ino_t)
+AC_CHECK_SIZEOF(dev_t)
+
+# Select the right stat being able to handle 64bit inodes, if needed.
+if test "$enable_largefile" != no; then
+ case "$host, $build" in
+ *-*-aix*,*|*,*-*-aix*)
+ if test "$ac_cv_sizeof_ino_t" == "4" -a "$ac_cv_sizeof_dev_t" == 4; then
+ AC_DEFINE(HOST_STAT_FOR_64BIT_INODES, stat64x,
+ [Define which stat syscall is able to handle 64bit indodes.])
+ fi;;
+ esac
+fi
+
+
+# sizeof(char) is 1 by definition.
+AC_CHECK_SIZEOF(void *)
+AC_CHECK_SIZEOF(short)
+AC_CHECK_SIZEOF(int)
+AC_CHECK_SIZEOF(long)
+AC_CHECK_TYPES([long long], [AC_CHECK_SIZEOF(long long)])
+GCC_STDINT_TYPES
+if test x"$ac_cv_c_uint64_t" = x"no" -o x"$ac_cv_c_int64_t" = x"no"; then
+ AC_MSG_ERROR([uint64_t or int64_t not found])
+fi
+
+# check what underlying integer type int64_t uses
+AC_CACHE_CHECK(for int64_t underlying type, ac_cv_int64_t_type, [
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#ifdef HAVE_STDINT_H
+#include <stdint.h>
+#endif
+template <typename T> struct X { };
+template <>
+struct X<long> { typedef long t; };
+]], [[X<int64_t>::t x;]])],[ac_cv_int64_t_type=long],[ac_cv_int64_t_type="long long"])])
+if test "$ac_cv_int64_t_type" = "long"; then
+ AC_DEFINE(INT64_T_IS_LONG, 1,
+ [Define if int64_t uses long as underlying type.])
+else
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#ifdef HAVE_STDINT_H
+#include <stdint.h>
+#endif
+template <typename T> struct X { };
+template <>
+struct X<long long> { typedef long long t; };
+]], [[X<int64_t>::t x;]])],[],[AC_MSG_ERROR([error verifying int64_t uses long long])])
+fi
+
+AC_CACHE_CHECK(for std::swap in <utility>, ac_cv_std_swap_in_utility, [
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#include <utility>
+]], [[int a, b; std::swap(a,b);]])],[ac_cv_std_swap_in_utility=yes],[ac_cv_std_swap_in_utility=no])])
+if test $ac_cv_std_swap_in_utility = yes; then
+ AC_DEFINE(HAVE_SWAP_IN_UTILITY, 1,
+ [Define if <utility> defines std::swap.])
+fi
+
+# Check whether compiler is affected by placement new aliasing bug (PR 29286).
+# If the host compiler is affected by the bug, and we build with optimization
+# enabled (which happens e.g. when cross-compiling), the pool allocator may
+# get miscompiled. Use -fno-strict-aliasing to work around this problem.
+# Since there is no reliable feature check for the presence of this bug,
+# we simply use a GCC version number check. (This should never trigger for
+# stages 2 or 3 of a native bootstrap.)
+aliasing_flags=
+if test "$GCC" = yes; then
+ saved_CXXFLAGS="$CXXFLAGS"
+
+ # The following test compilation will succeed if and only if $CXX accepts
+ # -fno-strict-aliasing *and* is older than GCC 4.3.
+ CXXFLAGS="$CXXFLAGS -fno-strict-aliasing"
+ AC_MSG_CHECKING([whether $CXX is affected by placement new aliasing bug])
+ AC_COMPILE_IFELSE([AC_LANG_SOURCE([
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3)
+#error compiler not affected by placement new aliasing bug
+#endif
+])],
+ [AC_MSG_RESULT([yes]); aliasing_flags='-fno-strict-aliasing'],
+ [AC_MSG_RESULT([no])])
+
+ CXXFLAGS="$saved_CXXFLAGS"
+fi
+AC_SUBST(aliasing_flags)
+
+
+
+# ---------------------
+# Warnings and checking
+# ---------------------
+
+# Check $CC warning features (if it's GCC).
+# We want to use -pedantic, but we don't want warnings about
+# * 'long long'
+# * variadic macros
+# * overlong strings
+# * C++11 narrowing conversions in { }
+# So, we only use -pedantic if we can disable those warnings.
+
+# In stage 1, disable -Wformat warnings from old GCCs about new % codes
+AC_ARG_ENABLE(build-format-warnings,
+ AS_HELP_STRING([--disable-build-format-warnings],[don't use -Wformat while building GCC]),
+ [],[enable_build_format_warnings=yes])
+AS_IF([test $enable_build_format_warnings = no],
+ [wf_opt=-Wno-format],[wf_opt=])
+ACX_PROG_CXX_WARNING_OPTS(
+ m4_quote(m4_do([-W -Wall -Wno-narrowing -Wwrite-strings ],
+ [-Wcast-qual $wf_opt])),
+ [loose_warn])
+ACX_PROG_CC_WARNING_OPTS(
+ m4_quote(m4_do([-Wstrict-prototypes -Wmissing-prototypes ],
+ [])), [c_loose_warn])
+ACX_PROG_CXX_WARNING_OPTS(
+ m4_quote(m4_do([-Wmissing-format-attribute ],
+ [-Woverloaded-virtual])), [strict_warn])
+ACX_PROG_CC_WARNING_OPTS(
+ m4_quote(m4_do([-Wold-style-definition -Wc++-compat])), [c_strict_warn])
+ACX_PROG_CXX_WARNING_ALMOST_PEDANTIC(
+ m4_quote(m4_do([-Wno-long-long -Wno-variadic-macros ],
+ [-Wno-overlength-strings])), [strict_warn])
+ACX_PROG_CXX_WARNINGS_ARE_ERRORS([manual], [strict_warn])
+
+# The above macros do nothing if the compiler is not GCC. However, the
+# Makefile has more goo to add other flags, so these variables are used
+# to enable warnings only for GCC.
+warn_cflags=
+warn_cxxflags=
+if test "x$GCC" = "xyes"; then
+ warn_cflags='$(GCC_WARN_CFLAGS)'
+ warn_cxxflags='$(GCC_WARN_CXXFLAGS)'
+fi
+AC_SUBST(warn_cflags)
+AC_SUBST(warn_cxxflags)
+
+# Disable exceptions and RTTI if building with g++
+ACX_PROG_CC_WARNING_OPTS(
+ m4_quote(m4_do([-fno-exceptions -fno-rtti -fasynchronous-unwind-tables])),
+ [noexception_flags])
+
+# Enable expensive internal checks
+is_release=
+if test x"`cat $srcdir/DEV-PHASE`" != xexperimental; then
+ is_release=yes
+fi
+
+AC_ARG_ENABLE(checking,
+[AS_HELP_STRING([[--enable-checking[=LIST]]],
+ [enable expensive run-time checks. With LIST,
+ enable only specific categories of checks.
+ Categories are: yes,no,all,none,release.
+ Flags are: assert,df,extra,fold,gc,gcac,gimple,misc,
+ rtlflag,rtl,runtime,tree,valgrind,types])],
+[ac_checking_flags="${enableval}"],[
+# Determine the default checks.
+if test x$is_release = x ; then
+ ac_checking_flags=yes,extra
+else
+ ac_checking_flags=release
+fi])
+IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="$IFS,"
+for check in release $ac_checking_flags
+do
+ case $check in
+ # these set all the flags to specific states
+ yes) ac_assert_checking=1 ; ac_checking=1 ; ac_df_checking= ;
+ ac_fold_checking= ; ac_gc_checking=1 ; ac_extra_checking= ;
+ ac_gc_always_collect= ; ac_gimple_checking=1 ; ac_rtl_checking= ;
+ ac_rtlflag_checking=1 ; ac_runtime_checking=1 ;
+ ac_tree_checking=1 ; ac_valgrind_checking= ;
+ ac_types_checking=1 ;;
+ no|none) ac_assert_checking= ; ac_checking= ; ac_df_checking= ;
+ ac_fold_checking= ; ac_gc_checking= ; ac_extra_checking= ;
+ ac_gc_always_collect= ; ac_gimple_checking= ; ac_rtl_checking= ;
+ ac_rtlflag_checking= ; ac_runtime_checking= ;
+ ac_tree_checking= ; ac_valgrind_checking= ;
+ ac_types_checking= ;;
+ all) ac_assert_checking=1 ; ac_checking=1 ; ac_df_checking=1 ;
+ ac_fold_checking=1 ; ac_gc_checking=1 ; ac_extra_checking=1 ;
+ ac_gc_always_collect=1 ; ac_gimple_checking=1 ; ac_rtl_checking=1 ;
+ ac_rtlflag_checking=1 ; ac_runtime_checking=1 ;
+ ac_tree_checking=1 ; ac_valgrind_checking= ;
+ ac_types_checking=1 ;;
+ release) ac_assert_checking=1 ; ac_checking= ; ac_df_checking= ;
+ ac_fold_checking= ; ac_gc_checking= ; ac_extra_checking= ;
+ ac_gc_always_collect= ; ac_gimple_checking= ; ac_rtl_checking= ;
+ ac_rtlflag_checking= ; ac_runtime_checking=1 ;
+ ac_tree_checking= ; ac_valgrind_checking= ;
+ ac_types_checking= ;;
+ # these enable particular checks
+ assert) ac_assert_checking=1 ;;
+ df) ac_df_checking=1 ;;
+ extra) ac_extra_checking=1 ;;
+ fold) ac_fold_checking=1 ;;
+ gc) ac_gc_checking=1 ;;
+ gcac) ac_gc_always_collect=1 ;;
+ gimple) ac_gimple_checking=1 ;;
+ misc) ac_checking=1 ;;
+ rtl) ac_rtl_checking=1 ;;
+ rtlflag) ac_rtlflag_checking=1 ;;
+ runtime) ac_runtime_checking=1 ;;
+ tree) ac_tree_checking=1 ;;
+ types) ac_types_checking=1 ;;
+ valgrind) ac_valgrind_checking=1 ;;
+ *) AC_MSG_ERROR(unknown check category $check) ;;
+ esac
+done
+IFS="$ac_save_IFS"
+
+nocommon_flag=""
+if test x$ac_checking != x ; then
+ AC_DEFINE(CHECKING_P, 1,
+[Define to 0/1 if you want more run-time sanity checks. This one gets a grab
+bag of miscellaneous but relatively cheap checks.])
+ nocommon_flag=-fno-common
+else
+ AC_DEFINE(CHECKING_P, 0)
+fi
+AC_SUBST(nocommon_flag)
+if test x$ac_extra_checking != x ; then
+ AC_DEFINE(ENABLE_EXTRA_CHECKING, 1,
+[Define to 0/1 if you want extra run-time checking that might affect code
+generation.])
+else
+ AC_DEFINE(ENABLE_EXTRA_CHECKING, 0)
+fi
+if test x$ac_df_checking != x ; then
+ AC_DEFINE(ENABLE_DF_CHECKING, 1,
+[Define if you want more run-time sanity checks for dataflow.])
+fi
+if test x$ac_assert_checking != x ; then
+ AC_DEFINE(ENABLE_ASSERT_CHECKING, 1,
+[Define if you want assertions enabled. This is a cheap check.])
+fi
+if test x$ac_gimple_checking != x ; then
+ AC_DEFINE(ENABLE_GIMPLE_CHECKING, 1,
+[Define if you want operations on GIMPLE (the basic data structure of
+the high-level optimizers) to be checked for dynamic type safety at
+runtime. This is moderately expensive.])
+fi
+GCC_TARGET_TEMPLATE(ENABLE_RUNTIME_CHECKING)
+if test x$ac_runtime_checking != x ; then
+ AC_DEFINE(ENABLE_RUNTIME_CHECKING, 1,
+[Define if you want runtime assertions enabled. This is a cheap check.])
+fi
+if test x$ac_tree_checking != x ; then
+ AC_DEFINE(ENABLE_TREE_CHECKING, 1,
+[Define if you want all operations on trees (the basic data
+ structure of the front ends) to be checked for dynamic type safety
+ at runtime. This is moderately expensive.
+ ])
+ TREECHECKING=yes
+fi
+if test x$ac_types_checking != x ; then
+ AC_DEFINE(ENABLE_TYPES_CHECKING, 1,
+[Define if you want all gimple types to be verified after gimplifiation.
+ This is cheap.
+ ])
+fi
+AC_SUBST(TREECHECKING)
+if test x$ac_rtl_checking != x ; then
+ AC_DEFINE(ENABLE_RTL_CHECKING, 1,
+[Define if you want all operations on RTL (the basic data structure
+ of the optimizer and back end) to be checked for dynamic type safety
+ at runtime. This is quite expensive.])
+fi
+if test x$ac_rtlflag_checking != x ; then
+ AC_DEFINE(ENABLE_RTL_FLAG_CHECKING, 1,
+[Define if you want RTL flag accesses to be checked against the RTL
+ codes that are supported for each access macro. This is relatively
+ cheap.])
+fi
+if test x$ac_gc_checking != x ; then
+ AC_DEFINE(ENABLE_GC_CHECKING, 1,
+[Define if you want the garbage collector to do object poisoning and
+ other memory allocation checks. This is quite expensive.])
+fi
+if test x$ac_gc_always_collect != x ; then
+ AC_DEFINE(ENABLE_GC_ALWAYS_COLLECT, 1,
+[Define if you want the garbage collector to operate in maximally
+ paranoid mode, validating the entire heap and collecting garbage at
+ every opportunity. This is extremely expensive.])
+fi
+if test x$ac_fold_checking != x ; then
+ AC_DEFINE(ENABLE_FOLD_CHECKING, 1,
+[Define if you want fold checked that it never destructs its argument.
+ This is quite expensive.])
+fi
+valgrind_path_defines=
+valgrind_command=
+
+dnl # This check AC_REQUIREs various stuff, so it *must not* be inside
+dnl # an if statement. This was the source of very frustrating bugs
+dnl # in converting to autoconf 2.5x!
+AC_CHECK_HEADER(valgrind.h, have_valgrind_h=yes, have_valgrind_h=no)
+
+# It is certainly possible that there's valgrind but no valgrind.h.
+# GCC relies on making annotations so we must have both.
+AC_MSG_CHECKING(for VALGRIND_DISCARD in <valgrind/memcheck.h>)
+AC_PREPROC_IFELSE([AC_LANG_SOURCE(
+ [[#include <valgrind/memcheck.h>
+#ifndef VALGRIND_DISCARD
+#error VALGRIND_DISCARD not defined
+#endif]])],
+ [gcc_cv_header_valgrind_memcheck_h=yes],
+ [gcc_cv_header_valgrind_memcheck_h=no])
+AC_MSG_RESULT($gcc_cv_header_valgrind_memcheck_h)
+AC_MSG_CHECKING(for VALGRIND_DISCARD in <memcheck.h>)
+AC_PREPROC_IFELSE([AC_LANG_SOURCE(
+ [[#include <memcheck.h>
+#ifndef VALGRIND_DISCARD
+#error VALGRIND_DISCARD not defined
+#endif]])],
+ [gcc_cv_header_memcheck_h=yes],
+ [gcc_cv_header_memcheck_h=no])
+AC_MSG_RESULT($gcc_cv_header_memcheck_h)
+if test $gcc_cv_header_valgrind_memcheck_h = yes; then
+ AC_DEFINE(HAVE_VALGRIND_MEMCHECK_H, 1,
+ [Define if valgrind's valgrind/memcheck.h header is installed.])
+fi
+if test $gcc_cv_header_memcheck_h = yes; then
+ AC_DEFINE(HAVE_MEMCHECK_H, 1,
+ [Define if valgrind's memcheck.h header is installed.])
+fi
+
+if test x$ac_valgrind_checking != x ; then
+ AM_PATH_PROG_WITH_TEST(valgrind_path, valgrind,
+ [$ac_dir/$ac_word --version | grep valgrind- >/dev/null 2>&1])
+ if test "x$valgrind_path" = "x" \
+ || (test $have_valgrind_h = no \
+ && test $gcc_cv_header_memcheck_h = no \
+ && test $gcc_cv_header_valgrind_memcheck_h = no); then
+ AC_MSG_ERROR([*** Can't find both valgrind and valgrind/memcheck.h, memcheck.h or valgrind.h])
+ fi
+ valgrind_path_defines=-DVALGRIND_PATH='\"'$valgrind_path'\"'
+ valgrind_command="$valgrind_path -q"
+ AC_DEFINE(ENABLE_VALGRIND_CHECKING, 1,
+[Define if you want to run subprograms and generated programs
+ through valgrind (a memory checker). This is extremely expensive.])
+fi
+AC_SUBST(valgrind_path_defines)
+AC_SUBST(valgrind_command)
+
+# Enable code coverage collection
+AC_ARG_ENABLE(coverage,
+[AS_HELP_STRING([[--enable-coverage[=LEVEL]]],
+ [enable compiler's code coverage collection.
+ Use to measure compiler performance and locate
+ unused parts of the compiler. With LEVEL, specify
+ optimization. Values are opt, noopt,
+ default is noopt])],
+[case "${enableval}" in
+ yes|noopt)
+ coverage_flags="-fprofile-arcs -ftest-coverage -frandom-seed=\$@ -O0 -fkeep-static-functions"
+ ;;
+ opt)
+ coverage_flags="-fprofile-arcs -ftest-coverage -frandom-seed=\$@ -O2 -fkeep-static-functions"
+ ;;
+ no)
+ # a.k.a. --disable-coverage
+ coverage_flags=""
+ ;;
+ *)
+ AC_MSG_ERROR(unknown coverage setting $enableval)
+ ;;
+esac],
+[coverage_flags=""])
+AC_SUBST(coverage_flags)
+
+AC_ARG_ENABLE(gather-detailed-mem-stats,
+[AS_HELP_STRING([--enable-gather-detailed-mem-stats],
+ [enable detailed memory allocation stats gathering])], [],
+[enable_gather_detailed_mem_stats=no])
+gather_stats=`if test $enable_gather_detailed_mem_stats != no; then echo 1; else echo 0; fi`
+AC_DEFINE_UNQUOTED(GATHER_STATISTICS, $gather_stats,
+[Define to enable detailed memory allocation stats gathering.])
+
+AC_ARG_ENABLE(valgrind-annotations,
+[AS_HELP_STRING([--enable-valgrind-annotations],
+ [enable valgrind runtime interaction])], [],
+[enable_valgrind_annotations=no])
+if test x$enable_valgrind_annotations != xno \
+ || test x$ac_valgrind_checking != x; then
+ if (test $have_valgrind_h = no \
+ && test $gcc_cv_header_memcheck_h = no \
+ && test $gcc_cv_header_valgrind_memcheck_h = no); then
+ AC_MSG_ERROR([*** Can't find valgrind/memcheck.h, memcheck.h or valgrind.h])
+ fi
+ AC_DEFINE(ENABLE_VALGRIND_ANNOTATIONS, 1,
+[Define to get calls to the valgrind runtime enabled.])
+fi
+
+# -------------------------------
+# Miscenalleous configure options
+# -------------------------------
+
+# Determine whether or not multilibs are enabled.
+AC_ARG_ENABLE(multilib,
+[AS_HELP_STRING([--enable-multilib],
+ [enable library support for multiple ABIs])],
+[], [enable_multilib=yes])
+AC_SUBST(enable_multilib)
+
+# Determine whether or not multiarch is enabled.
+AC_ARG_ENABLE(multiarch,
+[AS_HELP_STRING([--enable-multiarch],
+ [enable support for multiarch paths])],
+[case "${enableval}" in
+yes|no|auto) enable_multiarch=$enableval;;
+*) AC_MSG_ERROR(bad value ${enableval} given for --enable-multiarch option) ;;
+esac], [enable_multiarch=auto])
+if test x${enable_multiarch} = xauto; then
+ if test x${with_native_system_header_dir} != x; then
+ ma_msg_suffix=", disabled auto check (configured with --native-system-header-dir)"
+ enable_multiarch=no
+ fi
+ if test x$host != x$target && test "x$with_sysroot" = x; then
+ ma_msg_suffix=", disabled auto check (cross build configured without --with-sysroot)"
+ enable_multiarch=no
+ fi
+fi
+AC_MSG_CHECKING(for multiarch configuration)
+AC_SUBST(enable_multiarch)
+AC_MSG_RESULT($enable_multiarch$ma_msg_suffix)
+
+# needed for setting the multiarch name for soft-float/hard-float ABIs
+AC_SUBST(with_cpu)
+AC_SUBST(with_float)
+
+# default stack clash protection guard size as power of twos in bytes.
+# Please keep these in sync with params.def.
+stk_clash_min=12
+stk_clash_max=30
+
+# Keep the default value when the option is not used to 0, this allows us to
+# distinguish between the cases where the user specifially set a value via
+# configure and when the normal default value is used.
+AC_ARG_WITH(stack-clash-protection-guard-size,
+[AS_HELP_STRING([--with-stack-clash-protection-guard-size=size],
+[Set the default stack clash protection guard size for specific targets as a power of two in bytes.])],
+[DEFAULT_STK_CLASH_GUARD_SIZE="$with_stack_clash_protection_guard_size"], [DEFAULT_STK_CLASH_GUARD_SIZE=0])
+if test $DEFAULT_STK_CLASH_GUARD_SIZE -ne 0 \
+ && (test $DEFAULT_STK_CLASH_GUARD_SIZE -lt $stk_clash_min \
+ || test $DEFAULT_STK_CLASH_GUARD_SIZE -gt $stk_clash_max); then
+ AC_MSG_ERROR(m4_normalize([
+ Invalid value $DEFAULT_STK_CLASH_GUARD_SIZE for --with-stack-clash-protection-guard-size. \
+ Must be between $stk_clash_min and $stk_clash_max.]))
+fi
+
+AC_DEFINE_UNQUOTED(DEFAULT_STK_CLASH_GUARD_SIZE, $DEFAULT_STK_CLASH_GUARD_SIZE,
+ [Define to larger than zero set the default stack clash protector size.])
+
+# Enable __cxa_atexit for C++.
+AC_ARG_ENABLE(__cxa_atexit,
+[AS_HELP_STRING([--enable-__cxa_atexit], [enable __cxa_atexit for C++])],
+[], [])
+
+# Enable C extension for decimal float if target supports it.
+GCC_AC_ENABLE_DECIMAL_FLOAT([$target])
+
+dfp=`if test $enable_decimal_float != no; then echo 1; else echo 0; fi`
+AC_DEFINE_UNQUOTED(ENABLE_DECIMAL_FLOAT, $dfp,
+[Define to 1 to enable decimal float extension to C.])
+
+# Use default_decimal_float for dependency.
+enable_decimal_float=$default_decimal_float
+
+bid=`if test $enable_decimal_float = bid; then echo 1; else echo 0; fi`
+AC_DEFINE_UNQUOTED(ENABLE_DECIMAL_BID_FORMAT, $bid,
+[Define to 1 to specify that we are using the BID decimal floating
+point format instead of DPD])
+
+# Enable C extension for fixed-point arithmetic.
+AC_ARG_ENABLE(fixed-point,
+[AS_HELP_STRING([--enable-fixed-point],
+ [enable fixed-point arithmetic extension to C])],
+[],
+[
+ case $target in
+ arm*)
+ enable_fixed_point=yes
+ ;;
+
+ mips*-*-*)
+ enable_fixed_point=yes
+ ;;
+ loongarch*-*-*)
+ enable_fixed_point=yes
+ ;;
+ *)
+ AC_MSG_WARN([fixed-point is not supported for this target, ignored])
+ enable_fixed_point=no
+ ;;
+ esac
+])
+AC_SUBST(enable_fixed_point)
+
+fixedpoint=`if test $enable_fixed_point = yes; then echo 1; else echo 0; fi`
+AC_DEFINE_UNQUOTED(ENABLE_FIXED_POINT, $fixedpoint,
+[Define to 1 to enable fixed-point arithmetic extension to C.])
+
+# Enable threads
+# Pass with no value to take the default
+# Pass with a value to specify a thread package
+AC_ARG_ENABLE(threads,
+[AS_HELP_STRING([[--enable-threads[=LIB]]],
+ [enable thread usage for target GCC,
+ using LIB thread package])],,
+[enable_threads=''])
+
+AC_ARG_ENABLE(tls,
+[AS_HELP_STRING([--enable-tls],
+ [enable or disable generation of tls code
+ overriding the assembler check for tls support])],
+[
+ case $enable_tls in
+ yes | no) ;;
+ *) AC_MSG_ERROR(['$enable_tls' is an invalid value for --enable-tls.
+Valid choices are 'yes' and 'no'.]) ;;
+ esac
+], [enable_tls=''])
+
+AC_ARG_ENABLE(vtable-verify,
+[AS_HELP_STRING([--enable-vtable-verify],
+ [enable vtable verification feature])],,
+[enable_vtable_verify=no])
+vtable_verify=`if test x$enable_vtable_verify = xyes; then echo 1; else echo 0; fi`
+AC_DEFINE_UNQUOTED(ENABLE_VTABLE_VERIFY, $vtable_verify,
+[Define 0/1 if vtable verification feature is enabled.])
+
+AC_ARG_ENABLE(analyzer,
+[AS_HELP_STRING([--disable-analyzer],
+ [disable -fanalyzer static analyzer])],
+if test x$enable_analyzer = xno; then
+ analyzer=0
+else
+ analyzer=1
+fi,
+analyzer=1)
+AC_DEFINE_UNQUOTED(ENABLE_ANALYZER, $analyzer,
+[Define 0/1 if static analyzer feature is enabled.])
+
+AC_ARG_ENABLE(objc-gc,
+[AS_HELP_STRING([--enable-objc-gc],
+ [enable the use of Boehm's garbage collector with
+ the GNU Objective-C runtime])],
+if test x$enable_objc_gc = xno; then
+ objc_boehm_gc=''
+else
+ objc_boehm_gc=1
+fi,
+objc_boehm_gc='')
+
+AC_ARG_WITH(dwarf2,
+[AS_HELP_STRING([--with-dwarf2], [force the default debug format to be DWARF 2])],
+dwarf2="$with_dwarf2",
+dwarf2=no)
+
+AC_ARG_ENABLE(shared,
+[AS_HELP_STRING([--disable-shared], [don't provide a shared libgcc])],
+[
+ case $enable_shared in
+ yes | no) ;;
+ *)
+ enable_shared=no
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "Xgcc" || test "X$pkg" = "Xlibgcc"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+ esac
+], [enable_shared=yes])
+AC_SUBST(enable_shared)
+
+AC_ARG_ENABLE(gcov,
+[ --disable-gcov don't provide libgcov and related host tools],
+[], [case $target in
+ bpf-*-*)
+ enable_gcov=no
+ ;;
+ *)
+ enable_gcov=yes
+ ;;
+ esac])
+
+AC_SUBST(enable_gcov)
+
+AC_ARG_WITH(specs,
+ [AS_HELP_STRING([--with-specs=SPECS],
+ [add SPECS to driver command-line processing])],
+ [CONFIGURE_SPECS=$withval],
+ [CONFIGURE_SPECS=]
+)
+AC_SUBST(CONFIGURE_SPECS)
+
+ACX_PKGVERSION([GCC])
+ACX_BUGURL([https://gcc.gnu.org/bugs/])
+
+# Allow overriding the default URL for documentation
+AC_ARG_WITH(documentation-root-url,
+ AS_HELP_STRING([--with-documentation-root-url=URL],
+ [Root for documentation URLs]),
+ [case "$withval" in
+ yes) AC_MSG_ERROR([documentation root URL not specified]) ;;
+ no) AC_MSG_ERROR([documentation root URL not specified]) ;;
+ */) DOCUMENTATION_ROOT_URL="$withval" ;;
+ *) AC_MSG_ERROR([documentation root URL does not end with /]) ;;
+ esac],
+ DOCUMENTATION_ROOT_URL="https://gcc.gnu.org/onlinedocs/"
+)
+AC_DEFINE_UNQUOTED(DOCUMENTATION_ROOT_URL,"$DOCUMENTATION_ROOT_URL",
+ [Define to the root for documentation URLs.])
+
+# Allow overriding the default URL for GCC changes
+AC_ARG_WITH(changes-root-url,
+ AS_HELP_STRING([--with-changes-root-url=URL],
+ [Root for GCC changes URLs]),
+ [case "$withval" in
+ yes) AC_MSG_ERROR([changes root URL not specified]) ;;
+ no) AC_MSG_ERROR([changes root URL not specified]) ;;
+ */) CHANGES_ROOT_URL="$withval" ;;
+ *) AC_MSG_ERROR([changes root URL does not end with /]) ;;
+ esac],
+ CHANGES_ROOT_URL="https://gcc.gnu.org/"
+)
+AC_DEFINE_UNQUOTED(CHANGES_ROOT_URL,"$CHANGES_ROOT_URL",
+ [Define to the root for URLs about GCC changes.])
+
+# Sanity check enable_languages in case someone does not run the toplevel
+# configure # script.
+AC_ARG_ENABLE(languages,
+[AS_HELP_STRING([--enable-languages=LIST], [specify which front-ends to build])],
+[case ,${enable_languages}, in
+ ,,|,yes,)
+ # go safe -- we cannot be much sure without the toplevel
+ # configure's
+ # analysis of which target libs are present and usable
+ enable_languages=c
+ ;;
+ *,all,*)
+ AC_MSG_ERROR([only the toplevel supports --enable-languages=all])
+ ;;
+ *,c,*)
+ ;;
+ *)
+ enable_languages=c,${enable_languages}
+ ;;
+esac],
+[enable_languages=c])
+
+# If top-level libada has been disabled, then wire in install-gnatlib
+# invocation with `make install', so that one can build and install
+# the library manually with `make -C gcc all gnatlib gnattools install'.
+if test x"$enable_libada" = xno; then
+ gnat_install_lib=gnat-install-lib
+else
+ gnat_install_lib=
+fi
+AC_SUBST(gnat_install_lib)
+
+if test x"$enable_as_accelerator_for" != x; then
+ AC_DEFINE(ACCEL_COMPILER, 1,
+ [Define if this compiler should be built as the offload target compiler.])
+ enable_as_accelerator=yes
+ case "${target}" in
+ *-intelmicemul-*)
+ # In this case we expect offload compiler to be built as native, so we
+ # need to rename the driver to avoid clashes with host's drivers.
+ program_transform_name="s&^&${target}-&" ;;
+ esac
+ sedscript="s#${target_noncanonical}#${enable_as_accelerator_for}-accel-${target_noncanonical}#"
+ program_transform_name=`echo $program_transform_name | sed $sedscript`
+ accel_dir_suffix=/accel/${target_noncanonical}
+ real_target_noncanonical=${enable_as_accelerator_for}
+fi
+AC_SUBST(enable_as_accelerator)
+AC_SUBST(real_target_noncanonical)
+AC_SUBST(accel_dir_suffix)
+
+for tgt in `echo $enable_offload_targets | sed 's/,/ /g'`; do
+ tgt=`echo $tgt | sed 's/=.*//'`
+
+ enable_offloading=1
+ case "$tgt" in
+ *-intelmic-* | *-intelmicemul-*)
+ omp_device_property=omp-device-properties-i386
+ omp_device_property_tmake_file="${omp_device_property_tmake_file} \$(srcdir)/config/i386/t-omp-device"
+ ;;
+ amdgcn*)
+ omp_device_property=omp-device-properties-gcn
+ omp_device_property_tmake_file="${omp_device_property_tmake_file} \$(srcdir)/config/gcn/t-omp-device"
+ ;;
+ nvptx*)
+ omp_device_property=omp-device-properties-nvptx
+ omp_device_property_tmake_file="${omp_device_property_tmake_file} \$(srcdir)/config/nvptx/t-omp-device"
+ ;;
+ *)
+ AC_MSG_ERROR([unknown offload target specified])
+ ;;
+ esac
+ omp_device_properties="${omp_device_properties} ${tgt}=${omp_device_property}"
+ omp_device_property_deps="${omp_device_property_deps} ${omp_device_property}"
+
+ if test x"$offload_targets" = x; then
+ offload_targets=$tgt
+ else
+ offload_targets="$offload_targets,$tgt"
+ fi
+done
+AC_SUBST(omp_device_properties)
+AC_SUBST(omp_device_property_deps)
+
+AC_DEFINE_UNQUOTED(OFFLOAD_TARGETS, "$offload_targets",
+ [Define to offload targets, separated by commas.])
+if test x"$enable_offloading" != x; then
+ AC_DEFINE(ENABLE_OFFLOADING, 1,
+ [Define this to enable support for offloading.])
+else
+ AC_DEFINE(ENABLE_OFFLOADING, 0,
+ [Define this to enable support for offloading.])
+fi
+
+if test "x$enable_offload_defaulted" = xyes; then
+ AC_DEFINE(OFFLOAD_DEFAULTED, 1,
+ [Define to 1 to if -foffload is defaulted])
+fi
+
+AC_ARG_WITH(multilib-list,
+[AS_HELP_STRING([--with-multilib-list], [select multilibs (AArch64, ARM, AVR, OR1K, RISC-V, SH and x86-64 only)])],
+:,
+with_multilib_list=default)
+
+AC_ARG_WITH(multilib-generator,
+[AS_HELP_STRING([--with-multilib-generator], [Multi-libs configuration string (RISC-V only)])],
+:,
+with_multilib_generator=default)
+
+AC_ARG_WITH(extra-multilibs,
+[ --with-extra-multilibs Select extra multilibs (ARM only)],
+:,
+with_extra_multilibs=default)
+
+# -------------------------
+# Checks for other programs
+# -------------------------
+
+AC_PROG_MAKE_SET
+
+# Find some useful tools
+AC_PROG_AWK
+# We need awk to create options.cc and options.h.
+# Bail out if it's missing.
+case ${AWK} in
+ "") AC_MSG_ERROR([can't build without awk, bailing out]) ;;
+esac
+
+gcc_AC_PROG_LN_S
+ACX_PROG_LN($LN_S)
+AC_PROG_RANLIB
+ranlib_flags=""
+AC_SUBST(ranlib_flags)
+
+gcc_AC_PROG_INSTALL
+
+# See if cmp has --ignore-initial.
+gcc_AC_PROG_CMP_IGNORE_INITIAL
+
+# See if we have the mktemp command.
+AC_CHECK_PROG(have_mktemp_command, mktemp, yes, no)
+
+# See if makeinfo has been installed and is modern enough
+# that we can use it.
+ACX_CHECK_PROG_VER(MAKEINFO, makeinfo, --version,
+ [GNU texinfo.* \([0-9][0-9.]*\)],
+ [4.[7-9]*|4.[1-9][0-9]*|[5-9]*|[1-9][0-9]*])
+if test $gcc_cv_prog_makeinfo_modern = no; then
+ AC_MSG_WARN([
+*** Makeinfo is missing or too old.
+*** Info documentation will not be built.])
+ BUILD_INFO=
+else
+ BUILD_INFO=info
+fi
+AC_SUBST(BUILD_INFO)
+
+# Is pod2man recent enough to regenerate manpages?
+AC_MSG_CHECKING([for recent Pod::Man])
+if (perl -e 'use 1.10 Pod::Man') >/dev/null 2>&1; then
+ AC_MSG_RESULT(yes)
+ GENERATED_MANPAGES=generated-manpages
+else
+ AC_MSG_RESULT(no)
+ GENERATED_MANPAGES=
+fi
+AC_SUBST(GENERATED_MANPAGES)
+
+MISSING="${CONFIG_SHELL-/bin/sh} $ac_aux_dir/missing"
+
+# How about lex?
+dnl Don't use AC_PROG_LEX; we insist on flex.
+dnl LEXLIB is not useful in gcc.
+AC_CHECK_PROGS([FLEX], flex, [$MISSING flex])
+
+# Bison?
+AC_CHECK_PROGS([BISON], bison, [$MISSING bison])
+
+# Binutils are not build modules, unlike bison/flex/makeinfo. So we
+# check for build == host before using them.
+
+# NM
+if test x${build} = x${host} && test -f $srcdir/../binutils/nm.c \
+ && test -d ../binutils ; then
+ NM='${objdir}/../binutils/nm-new'
+else
+ AC_CHECK_PROG(NM, nm, nm, ${CONFIG_SHELL-/bin/sh} ${srcdir}/../missing nm)
+fi
+
+# AR
+if test x${build} = x${host} && test -f $srcdir/../binutils/ar.c \
+ && test -d ../binutils ; then
+ AR='${objdir}/../binutils/ar'
+else
+ AC_CHECK_PROG(AR, ar, ar, ${CONFIG_SHELL-/bin/sh} ${srcdir}/../missing ar)
+fi
+
+# The jit documentation looks better if built with sphinx, but can be
+# built with texinfo if sphinx is not available.
+# Set "doc_build_sys" to "sphinx" or "texinfo" accordingly.
+AC_CHECK_PROG(doc_build_sys, sphinx-build, sphinx, texinfo)
+
+# --------------------
+# Checks for C headers
+# --------------------
+
+# Need to reject headers which give warnings, so that the -Werror bootstrap
+# works later. *sigh* This needs to come before all header checks.
+AC_PROG_CPP_WERROR
+
+AC_HEADER_STDC
+AC_HEADER_TIME
+ACX_HEADER_STRING
+AC_HEADER_SYS_WAIT
+AC_HEADER_TIOCGWINSZ
+AC_CHECK_HEADERS(limits.h stddef.h string.h strings.h stdlib.h time.h iconv.h \
+ fcntl.h ftw.h unistd.h sys/file.h sys/time.h sys/mman.h \
+ sys/resource.h sys/param.h sys/times.h sys/stat.h sys/locking.h \
+ direct.h malloc.h langinfo.h ldfcn.h locale.h wchar.h)
+
+# Check for thread headers.
+AC_CHECK_HEADER(thread.h, [have_thread_h=yes], [have_thread_h=])
+AC_CHECK_HEADER(pthread.h, [have_pthread_h=yes], [have_pthread_h=])
+
+# These tests can't be done till we know if we have limits.h.
+gcc_AC_C_CHAR_BIT
+AC_C_BIGENDIAN
+
+# ----------------------
+# Checks for C++ headers
+# ----------------------
+
+dnl Autoconf will give an error in the configure script if there is no
+dnl C++ preprocessor. Hack to prevent that.
+m4_pushdef([AC_MSG_ERROR], m4_defn([AC_MSG_WARN]))[]dnl
+AC_PROG_CXXCPP
+m4_popdef([AC_MSG_ERROR])[]dnl
+
+AC_CHECK_HEADERS(unordered_map)
+AC_CHECK_HEADERS(tr1/unordered_map)
+AC_CHECK_HEADERS(ext/hash_map)
+
+# --------
+# Dependency checking.
+# --------
+
+ZW_CREATE_DEPDIR
+AC_CONFIG_COMMANDS([gccdepdir],[
+ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/mkinstalldirs build/$DEPDIR
+ for lang in $subdirs c-family common analyzer rtl-ssa
+ do
+ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/mkinstalldirs $lang/$DEPDIR
+ done], [subdirs="$subdirs" ac_aux_dir=$ac_aux_dir DEPDIR=$DEPDIR])
+
+ZW_PROG_COMPILER_DEPENDENCIES([CXX])
+
+# --------
+# UNSORTED
+# --------
+
+
+# These libraries may be used by collect2.
+# We may need a special search path to get them linked.
+AC_CACHE_CHECK(for collect2 libraries, gcc_cv_collect2_libs,
+[save_LIBS="$LIBS"
+for libs in '' -lld -lmld \
+ '-L/usr/lib/cmplrs/cc2.11 -lmld' \
+ '-L/usr/lib/cmplrs/cc3.11 -lmld'
+do
+ LIBS="$libs"
+ AC_TRY_LINK_FUNC(ldopen,
+ [gcc_cv_collect2_libs="$libs"; break])
+done
+LIBS="$save_LIBS"
+test -z "$gcc_cv_collect2_libs" && gcc_cv_collect2_libs='none required'])
+case $gcc_cv_collect2_libs in
+ "none required") ;;
+ *) COLLECT2_LIBS=$gcc_cv_collect2_libs ;;
+esac
+AC_SUBST(COLLECT2_LIBS)
+
+# When building Ada code on Alpha, we need exc_resume which is usually in
+# -lexc. So test for it.
+save_LIBS="$LIBS"
+LIBS=
+AC_SEARCH_LIBS(exc_resume, exc)
+GNAT_LIBEXC="$LIBS"
+LIBS="$save_LIBS"
+AC_SUBST(GNAT_LIBEXC)
+
+# To support -mcpu=native on Solaris/SPARC, we need libkstat.
+save_LIBS="$LIBS"
+LIBS=
+AC_SEARCH_LIBS(kstat_open, kstat)
+EXTRA_GCC_LIBS="$LIBS"
+LIBS="$save_LIBS"
+AC_SUBST(EXTRA_GCC_LIBS)
+
+# Solaris needs libsocket and libnsl for socket functions before 11.4.
+# C++ needs those for libcody.
+save_LIBS="$LIBS"
+LIBS=
+AX_LIB_SOCKET_NSL
+NETLIBS="$LIBS"
+LIBS="$save_LIBS"
+AC_SUBST(NETLIBS)
+
+# Some systems put ldexp and frexp in libm instead of libc; assume
+# they're both in the same place. jcf-dump needs them.
+save_LIBS="$LIBS"
+LIBS=
+AC_SEARCH_LIBS(ldexp, m)
+LDEXP_LIB="$LIBS"
+LIBS="$save_LIBS"
+AC_SUBST(LDEXP_LIB)
+
+# Some systems need dlopen
+save_LIBS="$LIBS"
+LIBS=
+AC_SEARCH_LIBS(dlopen, dl)
+DL_LIB="$LIBS"
+LIBS="$save_LIBS"
+AC_SUBST(DL_LIB)
+
+# Use <inttypes.h> only if it exists,
+# doesn't clash with <sys/types.h>, declares intmax_t and defines
+# PRId64
+AC_MSG_CHECKING(for inttypes.h)
+AC_CACHE_VAL(gcc_cv_header_inttypes_h,
+[AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
+[[#define __STDC_FORMAT_MACROS
+#include <sys/types.h>
+#include <inttypes.h>]],
+ [[intmax_t i = -1;
+#ifndef PRId64
+choke me
+#endif]])],
+ [gcc_cv_header_inttypes_h=yes],
+ [gcc_cv_header_inttypes_h=no])])
+AC_MSG_RESULT($gcc_cv_header_inttypes_h)
+if test $gcc_cv_header_inttypes_h = yes; then
+ AC_DEFINE(HAVE_INTTYPES_H, 1,
+ [Define if you have a working <inttypes.h> header file.])
+fi
+
+# Look for the ZSTD package.
+ZSTD_INCLUDE=
+ZSTD_LIB=
+AC_SUBST(ZSTD_INCLUDE)
+AC_SUBST(ZSTD_LIB)
+ZSTD_CPPFLAGS=
+ZSTD_LDFLAGS=
+AC_SUBST(ZSTD_CPPFLAGS)
+AC_SUBST(ZSTD_LDFLAGS)
+AC_ARG_WITH(zstd,
+ [AS_HELP_STRING([--with-zstd=PATH],
+ [specify prefix directory for installed zstd library.
+ Equivalent to --with-zstd-include=PATH/include
+ plus --with-zstd-lib=PATH/lib])])
+AC_ARG_WITH(zstd-include,
+ [AS_HELP_STRING([--with-zstd-include=PATH],
+ [specify directory for installed zstd include files])])
+AC_ARG_WITH(zstd-lib,
+ [AS_HELP_STRING([--with-zstd-lib=PATH],
+ [specify directory for the installed zstd library])])
+case "x$with_zstd" in
+ x) ;;
+ xno)
+ ZSTD_INCLUDE=
+ ZSTD_LIB=
+ ;;
+ *) ZSTD_INCLUDE=$with_zstd/include
+ ZSTD_LIB=$with_zstd/lib
+ ;;
+esac
+
+if test "x$with_zstd" != xno; then
+if test "x$with_zstd_include" != x; then
+ ZSTD_INCLUDE=$with_zstd_include
+fi
+if test "x$with_zstd_lib" != x; then
+ ZSTD_LIB=$with_zstd_lib
+fi
+if test "x$ZSTD_INCLUDE" != x \
+ && test "x$ZSTD_INCLUDE" != xno; then
+ ZSTD_CPPFLAGS=-I$ZSTD_INCLUDE
+fi
+if test "x$ZSTD_LIB" != x \
+ && test "x$ZSTD_LIB" != xno; then
+ ZSTD_LDFLAGS=-L$ZSTD_LIB
+fi
+
+CXXFLAGS="$CXXFLAGS $ZSTD_CPPFLAGS"
+LDFLAGS="$LDFLAGS $ZSTD_LDFLAGS"
+
+AC_MSG_CHECKING(for zstd.h)
+AC_CACHE_VAL(gcc_cv_header_zstd_h,
+# We require version 1.3.0 or later. This is the first version that has
+# ZSTD_getFrameContentSize.
+[AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
+[[#include <zstd.h>
+#if ZSTD_VERSION_NUMBER < 10300
+#error "need zstd 1.3.0 or better"
+#endif]])],
+ [gcc_cv_header_zstd_h=yes],
+ [gcc_cv_header_zstd_h=no])])
+AC_MSG_RESULT($gcc_cv_header_zstd_h)
+if test $gcc_cv_header_zstd_h = yes; then
+ AC_DEFINE(HAVE_ZSTD_H, 1,
+ [Define if you have a working <zstd.h> header file.])
+elif test "x$with_zstd" != x; then
+ as_fn_error $? "Unable to find zstd.h. See config.log for details." "$LINENO" 5
+fi
+
+# LTO can use zstd compression algorithm
+save_LIBS="$LIBS"
+LIBS=
+AC_SEARCH_LIBS(ZSTD_compress, zstd)
+ZSTD_LIB="$LIBS"
+LIBS="$save_LIBS"
+AC_SUBST(ZSTD_LIB)
+fi
+
+dnl Disabled until we have a complete test for buggy enum bitfields.
+dnl gcc_AC_C_ENUM_BF_UNSIGNED
+
+define(gcc_UNLOCKED_FUNCS, clearerr_unlocked feof_unlocked dnl
+ ferror_unlocked fflush_unlocked fgetc_unlocked fgets_unlocked dnl
+ fileno_unlocked fprintf_unlocked fputc_unlocked fputs_unlocked dnl
+ fread_unlocked fwrite_unlocked getchar_unlocked getc_unlocked dnl
+ putchar_unlocked putc_unlocked)
+AC_CHECK_FUNCS(times clock kill getrlimit setrlimit atoq \
+ popen sysconf strsignal getrusage nl_langinfo \
+ gettimeofday mbstowcs wcswidth mmap posix_fallocate setlocale \
+ gcc_UNLOCKED_FUNCS madvise mallinfo mallinfo2 fstatat)
+
+if test x$ac_cv_func_mbstowcs = xyes; then
+ AC_CACHE_CHECK(whether mbstowcs works, gcc_cv_func_mbstowcs_works,
+[ AC_RUN_IFELSE([AC_LANG_SOURCE([[#include <stdlib.h>
+int main()
+{
+ mbstowcs(0, "", 0);
+ return 0;
+}]])],
+ [gcc_cv_func_mbstowcs_works=yes],
+ [gcc_cv_func_mbstowcs_works=no],
+ [gcc_cv_func_mbstowcs_works=yes])])
+ if test x$gcc_cv_func_mbstowcs_works = xyes; then
+ AC_DEFINE(HAVE_WORKING_MBSTOWCS, 1,
+ [Define this macro if mbstowcs does not crash when its
+ first argument is NULL.])
+ fi
+fi
+
+AC_CHECK_TYPE(ssize_t, int)
+AC_CHECK_TYPE(caddr_t, char *)
+AC_CHECK_TYPE(sighander_t,
+ AC_DEFINE(HAVE_SIGHANDLER_T, 1,
+ [Define if <sys/signal.h> defines sighandler_t]),
+ ,signal.h)
+
+GCC_AC_FUNC_MMAP_BLACKLIST
+
+case "${host}" in
+*-*-*vms*)
+ # Under VMS, vfork works very differently than on Unix. The standard test
+ # won't work, and it isn't easily adaptable. It makes more sense to
+ # just force it.
+ ac_cv_func_vfork_works=yes
+ ;;
+esac
+AC_FUNC_FORK
+
+AM_ICONV
+
+# Until we have in-tree GNU iconv:
+LIBICONV_DEP=
+if test -f "$LTLIBICONV"; then
+ LIBICONV_DEP=$LTLIBICONV
+fi
+AC_SUBST(LIBICONV_DEP)
+
+AM_LC_MESSAGES
+
+AM_LANGINFO_CODESET
+
+# We will need to find libiberty.h and ansidecl.h
+saved_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS -I${srcdir} -I${srcdir}/../include $GMPINC"
+saved_CXXFLAGS="$CXXFLAGS"
+CXXFLAGS="$CXXFLAGS -I${srcdir} -I${srcdir}/../include $GMPINC"
+
+# gcc_AC_CHECK_DECLS doesn't support overloaded functions, so use the
+# normal autoconf function for these. But force definition of
+# HAVE_DECL_BASENAME like gcc_AC_CHECK_DECLS does, to suppress the bizarre
+# basename handling in libiberty.h.
+AC_CHECK_DECLS([basename(const char*), strstr(const char*,const char*)], , ,[
+#undef HAVE_DECL_BASENAME
+#define HAVE_DECL_BASENAME 1
+#include "ansidecl.h"
+#include "system.h"])
+
+gcc_AC_CHECK_DECLS(getenv atol atoll asprintf sbrk abort atof getcwd getwd \
+ madvise stpcpy strnlen strsignal strverscmp \
+ strtol strtoul strtoll strtoull setenv unsetenv \
+ errno snprintf vsnprintf vasprintf malloc realloc calloc \
+ free getopt clock getpagesize ffs gcc_UNLOCKED_FUNCS, , ,[
+#include "ansidecl.h"
+#include "system.h"])
+
+gcc_AC_CHECK_DECLS(getrlimit setrlimit getrusage, , ,[
+#include "ansidecl.h"
+#include "system.h"
+#ifdef HAVE_SYS_RESOURCE_H
+#include <sys/resource.h>
+#endif
+])
+
+gcc_AC_CHECK_DECLS(mallinfo mallinfo2, , ,[
+#include "ansidecl.h"
+#include "system.h"
+#ifdef HAVE_MALLOC_H
+#include <malloc.h>
+#endif
+])
+
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#include "ansidecl.h"
+#include "system.h"
+#ifdef HAVE_SYS_RESOURCE_H
+#include <sys/resource.h>
+#endif
+]], [[rlim_t l = 0;]])],[],[AC_DEFINE([rlim_t],[long],
+[Define to `long' if <sys/resource.h> doesn't define.])])
+
+# On AIX 5.2, <ldfcn.h> conflicts with <fcntl.h>, as both define incompatible
+# FREAD and FWRITE macros. Fortunately, for GCC's single usage of ldgetname
+# in collect2.cc, <fcntl.h> isn't visible, but the configure test below needs
+# to undef these macros to get the correct value for HAVE_DECL_LDGETNAME.
+gcc_AC_CHECK_DECLS(ldgetname, , ,[
+#include "ansidecl.h"
+#include "system.h"
+#ifdef HAVE_LDFCN_H
+#undef FREAD
+#undef FWRITE
+#include <ldfcn.h>
+#endif
+])
+
+gcc_AC_CHECK_DECLS(times, , ,[
+#include "ansidecl.h"
+#include "system.h"
+#ifdef HAVE_SYS_TIMES_H
+#include <sys/times.h>
+#endif
+])
+
+gcc_AC_CHECK_DECLS(sigaltstack, , ,[
+#include "ansidecl.h"
+#include "system.h"
+#include <signal.h>
+])
+
+# More time-related stuff.
+AC_CACHE_CHECK(for struct tms, ac_cv_struct_tms, [
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#include "ansidecl.h"
+#include "system.h"
+#ifdef HAVE_SYS_TIMES_H
+#include <sys/times.h>
+#endif
+]], [[struct tms tms;]])],[ac_cv_struct_tms=yes],[ac_cv_struct_tms=no])])
+if test $ac_cv_struct_tms = yes; then
+ AC_DEFINE(HAVE_STRUCT_TMS, 1,
+ [Define if <sys/times.h> defines struct tms.])
+fi
+
+# use gcc_cv_* here because this doesn't match the behavior of AC_CHECK_TYPE.
+# revisit after autoconf 2.50.
+AC_CACHE_CHECK(for clock_t, gcc_cv_type_clock_t, [
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#include "ansidecl.h"
+#include "system.h"
+]], [[clock_t x;]])],[gcc_cv_type_clock_t=yes],[gcc_cv_type_clock_t=no])])
+if test $gcc_cv_type_clock_t = yes; then
+ AC_DEFINE(HAVE_CLOCK_T, 1,
+ [Define if <time.h> defines clock_t.])
+fi
+
+# Check if F_SETLKW is supported by fcntl.
+AC_CACHE_CHECK(for F_SETLKW, ac_cv_f_setlkw, [
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#include <fcntl.h>]], [[
+struct flock fl;
+fl.l_whence = 0;
+fl.l_start = 0;
+fl.l_len = 0;
+fl.l_pid = 0;
+return fcntl (1, F_SETLKW, &fl);]])],
+[ac_cv_f_setlkw=yes],[ac_cv_f_setlkw=no])])
+if test $ac_cv_f_setlkw = yes; then
+ AC_DEFINE(HOST_HAS_F_SETLKW, 1,
+ [Define if F_SETLKW supported by fcntl.])
+fi
+
+# Check if O_CLOEXEC is defined by fcntl
+AC_CACHE_CHECK(for O_CLOEXEC, ac_cv_o_cloexec, [
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#include <fcntl.h>]], [[
+return open ("/dev/null", O_RDONLY | O_CLOEXEC);]])],
+[ac_cv_o_cloexec=yes],[ac_cv_o_cloexec=no])])
+if test $ac_cv_o_cloexec = yes; then
+ AC_DEFINE(HOST_HAS_O_CLOEXEC, 1,
+ [Define if O_CLOEXEC supported by fcntl.])
+fi
+
+# C++ Modules would like some networking features to provide the mapping
+# server. You can still use modules without them though.
+# The following network-related checks could probably do with some
+# Windows and other non-linux defenses and checking.
+
+# Local socket connectivity wants AF_UNIX networking
+# Check for AF_UNIX networking
+AC_CACHE_CHECK(for AF_UNIX, ac_cv_af_unix, [
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/un.h>
+#include <netinet/in.h>]],[[
+sockaddr_un un;
+un.sun_family = AF_UNSPEC;
+int fd = socket (AF_UNIX, SOCK_STREAM, 0);
+connect (fd, (sockaddr *)&un, sizeof (un));]])],
+[ac_cv_af_unix=yes],
+[ac_cv_af_unix=no])])
+if test $ac_cv_af_unix = yes; then
+ AC_DEFINE(HAVE_AF_UNIX, 1,
+ [Define if AF_UNIX supported.])
+fi
+
+# Remote socket connectivity wants AF_INET6 networking
+# Check for AF_INET6 networking
+AC_CACHE_CHECK(for AF_INET6, ac_cv_af_inet6, [
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <netdb.h>]],[[
+sockaddr_in6 in6;
+in6.sin6_family = AF_UNSPEC;
+struct addrinfo *addrs = 0;
+struct addrinfo hints;
+hints.ai_flags = 0;
+hints.ai_family = AF_INET6;
+hints.ai_socktype = SOCK_STREAM;
+hints.ai_protocol = 0;
+hints.ai_canonname = 0;
+hints.ai_addr = 0;
+hints.ai_next = 0;
+int e = getaddrinfo ("localhost", 0, &hints, &addrs);
+const char *str = gai_strerror (e);
+freeaddrinfo (addrs);
+int fd = socket (AF_INET6, SOCK_STREAM, 0);
+connect (fd, (sockaddr *)&in6, sizeof (in6));]])],
+[ac_cv_af_inet6=yes],
+[ac_cv_af_inet6=no])])
+if test $ac_cv_af_inet6 = yes; then
+ AC_DEFINE(HAVE_AF_INET6, 1,
+ [Define if AF_INET6 supported.])
+fi
+
+# Check if _LK_LOCK is supported by _locking
+AC_CACHE_CHECK(for _LK_LOCK, ac_cv_lk_lock, [
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+#include <io.h>
+#include <sys/locking.h>]], [[
+ int fd;
+ return _locking (fd, _LK_LOCK, 0);]])],
+[ac_cv_lk_lock=yes],[ac_cv_lk_lock=no])])
+if test $ac_cv_lk_lock = yes; then
+ AC_DEFINE(HOST_HAS_LK_LOCK, 1,
+ [Define if _LK_LOC supported by _locking.])
+fi
+
+# Restore CFLAGS, CXXFLAGS from before the gcc_AC_NEED_DECLARATIONS tests.
+CFLAGS="$saved_CFLAGS"
+CXXFLAGS="$saved_CXXFLAGS"
+
+# mkdir takes a single argument on some systems.
+gcc_AC_FUNC_MKDIR_TAKES_ONE_ARG
+
+# File extensions
+manext='.1'
+objext='.o'
+AC_SUBST(manext)
+AC_SUBST(objext)
+
+# With Setjmp/Longjmp based exception handling.
+AC_ARG_ENABLE(sjlj-exceptions,
+[AS_HELP_STRING([--enable-sjlj-exceptions],
+ [arrange to use setjmp/longjmp exception handling])],
+[case $target in
+ *-*-hpux10*)
+ if test $enableval != yes; then
+ AC_MSG_WARN([dwarf2 exceptions not supported, sjlj exceptions forced])
+ enableval=yes
+ fi
+ ;;
+esac
+force_sjlj_exceptions=yes],
+[case $target in
+ *-*-hpux10*)
+ force_sjlj_exceptions=yes
+ enableval=yes
+ ;;
+ lm32*-*-*)
+ force_sjlj_exceptions=yes
+ enableval=yes
+ ;;
+ *)
+ force_sjlj_exceptions=no
+ ;;
+esac])
+if test $force_sjlj_exceptions = yes; then
+ sjlj=`if test $enableval = yes; then echo 1; else echo 0; fi`
+ AC_DEFINE_UNQUOTED(CONFIG_SJLJ_EXCEPTIONS, $sjlj,
+ [Define 0/1 to force the choice for exception handling model.])
+fi
+
+# --------------------------------------------------------
+# Build, host, and target specific configuration fragments
+# --------------------------------------------------------
+
+# Collect build-machine-specific information.
+. ${srcdir}/config.build || exit 1
+
+# Collect host-machine-specific information.
+. ${srcdir}/config.host || exit 1
+
+target_gtfiles=
+
+# Collect target-machine-specific information.
+. ${srcdir}/config.gcc || exit 1
+
+extra_objs="${host_extra_objs} ${extra_objs}"
+extra_gcc_objs="${host_extra_gcc_objs} ${extra_gcc_objs}"
+
+# Default the target-machine variables that were not explicitly set.
+if test x"$tm_file" = x
+then tm_file=$cpu_type/$cpu_type.h; fi
+
+if test x"$extra_headers" = x
+then extra_headers=; fi
+
+if test x$md_file = x
+then md_file=$cpu_type/$cpu_type.md; fi
+
+if test x$out_file = x
+then out_file=$cpu_type/$cpu_type.cc; fi
+
+if test x"$tmake_file" = x
+then tmake_file=$cpu_type/t-$cpu_type
+fi
+
+# Support --enable-initfini-array.
+if test x$enable_initfini_array != xno; then
+ tm_file="${tm_file} initfini-array.h"
+fi
+
+if test x"$dwarf2" = xyes
+then tm_file="$tm_file tm-dwarf2.h"
+fi
+
+# Say what files are being used for the output code and MD file.
+echo "Using \`$srcdir/config/$out_file' for machine-specific logic."
+echo "Using \`$srcdir/config/$md_file' as machine description file."
+
+# If any of the xm_file variables contain nonexistent files, warn
+# about them and drop them.
+
+bx=
+for x in $build_xm_file; do
+ if test -f $srcdir/config/$x
+ then bx="$bx $x"
+ else AC_MSG_WARN($srcdir/config/$x does not exist.)
+ fi
+done
+build_xm_file="$bx"
+
+hx=
+for x in $host_xm_file; do
+ if test -f $srcdir/config/$x
+ then hx="$hx $x"
+ else AC_MSG_WARN($srcdir/config/$x does not exist.)
+ fi
+done
+host_xm_file="$hx"
+
+tx=
+for x in $xm_file; do
+ if test -f $srcdir/config/$x
+ then tx="$tx $x"
+ else AC_MSG_WARN($srcdir/config/$x does not exist.)
+ fi
+done
+xm_file="$tx"
+
+count=a
+for f in $tm_file; do
+ count=${count}x
+done
+if test $count = ax; then
+ echo "Using \`$srcdir/config/$tm_file' as target machine macro file."
+else
+ echo "Using the following target machine macro files:"
+ for f in $tm_file; do
+ echo " $srcdir/config/$f"
+ done
+fi
+
+if test x$use_long_long_for_widest_fast_int = xyes; then
+ AC_DEFINE(USE_LONG_LONG_FOR_WIDEST_FAST_INT, 1,
+[Define to 1 if the 'long long' type is wider than 'long' but still
+efficiently supported by the host hardware.])
+fi
+
+gnu_ld_bool=`if test x"$gnu_ld" = x"yes"; then echo 1; else echo 0; fi`
+AC_DEFINE_UNQUOTED(HAVE_GNU_LD, $gnu_ld_bool, [Define to 1 if using GNU ld.])
+
+gnu_as_bool=`if test x"$gas" = x"yes"; then echo 1; else echo 0; fi`
+AC_DEFINE_UNQUOTED(HAVE_GNU_AS, $gnu_as_bool, [Define to 1 if using GNU as.])
+
+count=a
+for f in $host_xm_file; do
+ count=${count}x
+done
+if test $count = a; then
+ :
+elif test $count = ax; then
+ echo "Using \`$srcdir/config/$host_xm_file' as host machine macro file."
+else
+ echo "Using the following host machine macro files:"
+ for f in $host_xm_file; do
+ echo " $srcdir/config/$f"
+ done
+fi
+echo "Using ${out_host_hook_obj} for host machine hooks."
+
+if test "$host_xm_file" != "$build_xm_file"; then
+ count=a
+ for f in $build_xm_file; do
+ count=${count}x
+ done
+ if test $count = a; then
+ :
+ elif test $count = ax; then
+ echo "Using \`$srcdir/config/$build_xm_file' as build machine macro file."
+ else
+ echo "Using the following build machine macro files:"
+ for f in $build_xm_file; do
+ echo " $srcdir/config/$f"
+ done
+ fi
+fi
+
+if test -n "$configured_native_system_header_dir"; then
+ native_system_header_dir=$configured_native_system_header_dir
+fi
+NATIVE_SYSTEM_HEADER_DIR="$native_system_header_dir"
+AC_SUBST(NATIVE_SYSTEM_HEADER_DIR)
+
+case ${host} in
+ powerpc*-*-darwin*)
+ AC_CACHE_CHECK([whether mcontext_t fields have underscores],
+ gcc_cv_mcontext_underscores,
+ AC_COMPILE_IFELSE([AC_LANG_SOURCE([
+#include <sys/cdefs.h>
+#include <sys/signal.h>
+#include <ucontext.h>
+int main() { mcontext_t m; if (m->ss.srr0) return 0; return 0; }
+])],
+ gcc_cv_mcontext_underscores=no, gcc_cv_mcontext_underscores=yes))
+ if test $gcc_cv_mcontext_underscores = yes; then
+ AC_DEFINE(HAS_MCONTEXT_T_UNDERSCORES,,dnl
+ [mcontext_t fields start with __])
+ fi
+ ;;
+esac
+
+# ---------
+# Threading
+# ---------
+
+# Check if a valid thread package
+case ${enable_threads} in
+ "" | no)
+ # No threads
+ target_thread_file='single'
+ ;;
+ yes)
+ # default
+ target_thread_file='single'
+ ;;
+ aix | dce | lynx | mipssde | posix | rtems | \
+ single | tpf | vxworks | win32)
+ target_thread_file=${enable_threads}
+ ;;
+ *)
+ echo "${enable_threads} is an unknown thread package" 1>&2
+ exit 1
+ ;;
+esac
+
+if test x${thread_file} = x; then
+ # No thread file set by target-specific clauses in config.gcc,
+ # so use file chosen by default logic above
+ thread_file=${target_thread_file}
+fi
+
+# --------
+# UNSORTED
+# --------
+
+use_cxa_atexit=no
+if test x$enable___cxa_atexit = xyes || \
+ test x$enable___cxa_atexit = x -a x$default_use_cxa_atexit = xyes; then
+ if test x$host = x$target; then
+ case $host in
+ # mingw32 doesn't have __cxa_atexit but uses atexit registration
+ # keyed to flag_use_cxa_atexit
+ *-*-mingw32*)
+ use_cxa_atexit=yes
+ ;;
+ powerpc-ibm-aix*)
+ use_cxa_atexit=yes
+ ;;
+ *)
+ AC_CHECK_FUNC(__cxa_atexit,[use_cxa_atexit=yes],
+ [echo "__cxa_atexit can't be enabled on this target"])
+ ;;
+ esac
+ else
+ # We can't check for __cxa_atexit when building a cross, so assume
+ # it is available
+ use_cxa_atexit=yes
+ fi
+ if test x$use_cxa_atexit = xyes; then
+ AC_DEFINE(DEFAULT_USE_CXA_ATEXIT, 2,
+ [Define if you want to use __cxa_atexit, rather than atexit, to
+ register C++ destructors for local statics and global objects.
+ This is essential for fully standards-compliant handling of
+ destructors, but requires __cxa_atexit in libc.])
+ fi
+fi
+
+# Look for a file containing extra machine modes.
+if test -n "$extra_modes" && test -f $srcdir/config/$extra_modes; then
+ extra_modes_file='$(srcdir)'/config/${extra_modes}
+ AC_SUBST(extra_modes_file)
+ AC_DEFINE_UNQUOTED(EXTRA_MODES_FILE, "config/$extra_modes",
+ [Define to the name of a file containing a list of extra machine modes
+ for this architecture.])
+fi
+
+# Convert extra_options into a form suitable for Makefile use.
+extra_opt_files=
+all_opt_files=
+for f in $extra_options; do
+ extra_opt_files="$extra_opt_files \$(srcdir)/config/$f"
+ all_opt_files="$all_opt_files $srcdir/config/$f"
+done
+AC_SUBST(extra_opt_files)
+
+# auto-host.h is the file containing items generated by autoconf and is
+# the first file included by config.h.
+# If host=build, it is correct to have bconfig include auto-host.h
+# as well. If host!=build, we are in error and need to do more
+# work to find out the build config parameters.
+if test x$host = x$build
+then
+ build_auto=auto-host.h
+ HAVE_AUTO_BUILD='# '
+else
+ # We create a subdir, then run autoconf in the subdir.
+ # To prevent recursion we set host and build for the new
+ # invocation of configure to the build for this invocation
+ # of configure.
+ tempdir=build.$$
+ rm -rf $tempdir
+ mkdir $tempdir
+ cd $tempdir
+ case ${srcdir} in
+ /* | [A-Za-z]:[\\/]* ) realsrcdir=${srcdir};;
+ *) realsrcdir=../${srcdir};;
+ esac
+ # Clearing GMPINC is necessary to prevent host headers being
+ # used by the build compiler. Defining GENERATOR_FILE stops
+ # system.h from including gmp.h.
+ CC="${CC_FOR_BUILD}" CFLAGS="${CFLAGS_FOR_BUILD}" \
+ CXX="${CXX_FOR_BUILD}" CXXFLAGS="${CXXFLAGS_FOR_BUILD}" \
+ LD="${LD_FOR_BUILD}" LDFLAGS="${LDFLAGS_FOR_BUILD}" \
+ GMPINC="" CPPFLAGS="${CPPFLAGS_FOR_BUILD} -DGENERATOR_FILE" \
+ ${realsrcdir}/configure \
+ --enable-languages=${enable_languages-all} \
+ ${enable_obsolete+--enable-obsolete="$enable_obsolete"} \
+ ${enable_option_checking+--enable-option-checking="$enable_option_checking"} \
+ --target=$target_alias --host=$build_alias \
+ --build=$build_alias || exit # retaining $tempdir
+
+ # We just finished tests for the build machine, so rename
+ # the file auto-build.h in the gcc directory.
+ mv auto-host.h ../auto-build.h
+ cd ..
+ rm -rf $tempdir
+ build_auto=auto-build.h
+ HAVE_AUTO_BUILD=
+fi
+AC_SUBST(build_subdir)
+AC_SUBST(HAVE_AUTO_BUILD)
+
+tm_file="${tm_file} defaults.h"
+tm_p_file="${tm_p_file} tm-preds.h"
+tm_d_file="${tm_d_file} defaults.h"
+host_xm_file="auto-host.h ansidecl.h ${host_xm_file}"
+build_xm_file="${build_auto} ansidecl.h ${build_xm_file}"
+# We don't want ansidecl.h in target files, write code there in ISO/GNU C.
+# put this back in temporarily.
+xm_file="auto-host.h ansidecl.h ${xm_file}"
+
+# --------
+# UNSORTED
+# --------
+
+changequote(,)dnl
+# Compile in configure arguments.
+if test -f configargs.h ; then
+ # Being re-configured.
+ gcc_config_arguments=`grep configuration_arguments configargs.h | sed -e 's/.*"\([^"]*\)".*/\1/'`
+ gcc_reconf_arguments=`echo "$gcc_config_arguments" | sed -e 's/^.*\( : (reconfigured) .*$\)/\1/'`
+ if [ "$gcc_reconf_arguments" != " : (reconfigured) $TOPLEVEL_CONFIGURE_ARGUMENTS" ]; then
+ gcc_config_arguments="$gcc_config_arguments : (reconfigured) $TOPLEVEL_CONFIGURE_ARGUMENTS"
+ fi
+else
+ gcc_config_arguments="$TOPLEVEL_CONFIGURE_ARGUMENTS"
+fi
+
+# Double all backslashes and backslash all quotes to turn
+# gcc_config_arguments into a C string.
+sed -e 's/\\/\\\\/g; s/"/\\"/g' <<EOF >conftest.out
+$gcc_config_arguments
+EOF
+gcc_config_arguments_str=`cat conftest.out`
+rm -f conftest.out
+
+cat > configargs.h <<EOF
+/* Generated automatically. */
+static const char configuration_arguments[] = "$gcc_config_arguments_str";
+static const char thread_model[] = "$thread_file";
+
+static const struct {
+ const char *name, *value;
+} configure_default_options[] = $configure_default_options;
+EOF
+changequote([,])dnl
+
+changequote(,)dnl
+gcc_BASEVER=`cat $srcdir/BASE-VER`
+gcc_DEVPHASE=`cat $srcdir/DEV-PHASE`
+gcc_DATESTAMP=`cat $srcdir/DATESTAMP`
+if test -f $srcdir/REVISION ; then
+ gcc_REVISION=`cat $srcdir/REVISION`
+else
+ gcc_REVISION=""
+fi
+cat > plugin-version.h <<EOF
+#include "configargs.h"
+
+#define GCCPLUGIN_VERSION_MAJOR `echo $gcc_BASEVER | sed -e 's/^\([0-9]*\).*$/\1/'`
+#define GCCPLUGIN_VERSION_MINOR `echo $gcc_BASEVER | sed -e 's/^[0-9]*\.\([0-9]*\).*$/\1/'`
+#define GCCPLUGIN_VERSION_PATCHLEVEL `echo $gcc_BASEVER | sed -e 's/^[0-9]*\.[0-9]*\.\([0-9]*\)$/\1/'`
+#define GCCPLUGIN_VERSION (GCCPLUGIN_VERSION_MAJOR*1000 + GCCPLUGIN_VERSION_MINOR)
+
+static char basever[] = "$gcc_BASEVER";
+static char datestamp[] = "$gcc_DATESTAMP";
+static char devphase[] = "$gcc_DEVPHASE";
+static char revision[] = "$gcc_REVISION";
+
+/* FIXME plugins: We should make the version information more precise.
+ One way to do is to add a checksum. */
+
+static struct plugin_gcc_version gcc_version = {basever, datestamp,
+ devphase, revision,
+ configuration_arguments};
+EOF
+changequote([,])dnl
+
+# Determine what GCC version number to use in filesystem paths.
+GCC_BASE_VER
+
+# Internationalization
+ZW_GNU_GETTEXT_SISTER_DIR
+
+# If LIBINTL contains LIBICONV, then clear LIBICONV so we don't get
+# -liconv on the link line twice.
+case "$LIBINTL" in *$LIBICONV*)
+ LIBICONV= ;;
+esac
+
+AC_ARG_ENABLE(secureplt,
+[AS_HELP_STRING([--enable-secureplt],
+ [enable -msecure-plt by default for PowerPC])],
+[], [])
+
+AC_ARG_ENABLE(mingw-wildcard,
+[AS_HELP_STRING([--enable-mingw-wildcard],
+ [Set whether to expand wildcard on command-line.
+ Default to platform configuration])],
+[],[enable_mingw_wildcard=platform])
+AS_IF([test x"$enable_mingw_wildcard" != xplatform ],
+ [AC_DEFINE_UNQUOTED(MINGW_DOWILDCARD,
+ $(test x"$enable_mingw_wildcard" = xno; echo $?),
+ [Value to set mingw's _dowildcard to.])])
+
+AC_ARG_ENABLE(large-address-aware,
+[AS_HELP_STRING([--enable-large-address-aware],
+ [Link mingw executables with --large-address-aware])])
+AS_IF([test x"$enable_large_address_aware" = xyes],
+ [AC_DEFINE([MINGW_DEFAULT_LARGE_ADDR_AWARE], 1,
+ [Define if we should link mingw executables with --large-address-aware])])
+
+AC_ARG_ENABLE(leading-mingw64-underscores,
+ AS_HELP_STRING([--enable-leading-mingw64-underscores],
+ [enable leading underscores on 64 bit mingw targets]),
+ [],[])
+AS_IF([ test x"$enable_leading_mingw64_underscores" = xyes ],
+ [AC_DEFINE(USE_MINGW64_LEADING_UNDERSCORES, 1,
+ [Define if we should use leading underscore on 64 bit mingw targets])])
+
+AC_ARG_ENABLE(cld,
+[AS_HELP_STRING([--enable-cld], [enable -mcld by default for 32bit x86])], [],
+[enable_cld=no])
+
+AC_ARG_ENABLE(frame-pointer,
+[AS_HELP_STRING([--enable-frame-pointer],
+ [enable -fno-omit-frame-pointer by default for x86])], [],
+[
+case $target_os in
+linux* | gnu* | darwin[[8912]]* | cygwin* | mingw*)
+ # Enable -fomit-frame-pointer by default for these systems with DWARF2.
+ enable_frame_pointer=no
+ ;;
+*)
+ enable_frame_pointer=yes
+ ;;
+esac
+])
+
+case $target in
+i[[34567]]86-*-* | x86_64-*-*)
+ if test "x$enable_cld" = xyes; then
+ tm_defines="${tm_defines} USE_IX86_CLD=1"
+ fi
+ if test "x$enable_frame_pointer" = xyes; then
+ tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
+ fi
+ ;;
+esac
+
+# Windows32 Registry support for specifying GCC installation paths.
+AC_ARG_ENABLE(win32-registry,
+[AS_HELP_STRING([--disable-win32-registry],
+ [disable lookup of installation paths in the
+ Registry on Windows hosts])
+AS_HELP_STRING([--enable-win32-registry], [enable registry lookup (default)])
+AS_HELP_STRING([--enable-win32-registry=KEY],
+ [use KEY instead of GCC version as the last portion
+ of the registry key])],,)
+
+case $host_os in
+ win32 | pe | cygwin* | mingw32*)
+ if test "x$enable_win32_registry" != xno; then
+ AC_SEARCH_LIBS(RegOpenKeyExA, advapi32,, [enable_win32_registry=no])
+ fi
+
+ if test "x$enable_win32_registry" != xno; then
+ AC_DEFINE(ENABLE_WIN32_REGISTRY, 1,
+ [Define to 1 if installation paths should be looked up in the Windows
+ Registry. Ignored on non-Windows hosts.])
+
+ if test "x$enable_win32_registry" != xyes \
+ && test "x$enable_win32_registry" != x; then
+ AC_DEFINE_UNQUOTED(WIN32_REGISTRY_KEY, "$enable_win32_registry",
+ [Define to be the last component of the Windows registry key under which
+ to look for installation paths. The full key used will be
+ HKEY_LOCAL_MACHINE/SOFTWARE/Free Software Foundation/{WIN32_REGISTRY_KEY}.
+ The default is the GCC version number.])
+ fi
+ fi
+ ;;
+esac
+
+# Get an absolute path to the GCC top-level source directory
+holddir=`${PWDCMD-pwd}`
+cd $srcdir
+topdir=`${PWDCMD-pwd}`
+cd $holddir
+
+# Conditionalize the makefile for this host machine.
+xmake_file=
+for f in ${host_xmake_file}
+do
+ if test -f ${srcdir}/config/$f
+ then
+ xmake_file="${xmake_file} \$(srcdir)/config/$f"
+ fi
+done
+
+# Conditionalize the makefile for this target machine.
+tmake_file_=
+for f in ${tmake_file}
+do
+ if test -f ${srcdir}/config/$f
+ then
+ tmake_file_="${tmake_file_} \$(srcdir)/config/$f"
+ fi
+done
+tmake_file="${tmake_file_}${omp_device_property_tmake_file}"
+
+out_object_file=`basename $out_file .cc`.o
+common_out_object_file=`basename $common_out_file .cc`.o
+
+tm_file_list="options.h"
+tm_include_list="options.h insn-constants.h"
+for f in $tm_file; do
+ case $f in
+ ./* )
+ f=`echo $f | sed 's/^..//'`
+ tm_file_list="${tm_file_list} $f"
+ tm_include_list="${tm_include_list} $f"
+ ;;
+ defaults.h )
+ tm_file_list="${tm_file_list} \$(srcdir)/$f"
+ tm_include_list="${tm_include_list} $f"
+ ;;
+ * )
+ tm_file_list="${tm_file_list} \$(srcdir)/config/$f"
+ tm_include_list="${tm_include_list} config/$f"
+ ;;
+ esac
+done
+
+tm_p_file_list=
+tm_p_include_list=
+for f in $tm_p_file; do
+ case $f in
+ tm-preds.h )
+ tm_p_file_list="${tm_p_file_list} $f"
+ tm_p_include_list="${tm_p_include_list} $f"
+ ;;
+ * )
+ tm_p_file_list="${tm_p_file_list} \$(srcdir)/config/$f"
+ tm_p_include_list="${tm_p_include_list} config/$f"
+ esac
+done
+
+tm_d_file_list=
+tm_d_include_list="options.h insn-constants.h"
+for f in $tm_d_file; do
+ case $f in
+ defaults.h )
+ tm_d_file_list="${tm_d_file_list} \$(srcdir)/$f"
+ tm_d_include_list="${tm_d_include_list} $f"
+ ;;
+ * )
+ tm_d_file_list="${tm_d_file_list} \$(srcdir)/config/$f"
+ tm_d_include_list="${tm_d_include_list} config/$f"
+ ;;
+ esac
+done
+
+xm_file_list=
+xm_include_list=
+for f in $xm_file; do
+ case $f in
+ ansidecl.h )
+ xm_file_list="${xm_file_list} \$(srcdir)/../include/$f"
+ xm_include_list="${xm_include_list} $f"
+ ;;
+ auto-host.h )
+ xm_file_list="${xm_file_list} $f"
+ xm_include_list="${xm_include_list} $f"
+ ;;
+ * )
+ xm_file_list="${xm_file_list} \$(srcdir)/config/$f"
+ xm_include_list="${xm_include_list} config/$f"
+ ;;
+ esac
+done
+
+host_xm_file_list=
+host_xm_include_list=
+for f in $host_xm_file; do
+ case $f in
+ ansidecl.h )
+ host_xm_file_list="${host_xm_file_list} \$(srcdir)/../include/$f"
+ host_xm_include_list="${host_xm_include_list} $f"
+ ;;
+ auto-host.h )
+ host_xm_file_list="${host_xm_file_list} $f"
+ host_xm_include_list="${host_xm_include_list} $f"
+ ;;
+ * )
+ host_xm_file_list="${host_xm_file_list} \$(srcdir)/config/$f"
+ host_xm_include_list="${host_xm_include_list} config/$f"
+ ;;
+ esac
+done
+
+build_xm_file_list=
+for f in $build_xm_file; do
+ case $f in
+ ansidecl.h )
+ build_xm_file_list="${build_xm_file_list} \$(srcdir)/../include/$f"
+ build_xm_include_list="${build_xm_include_list} $f"
+ ;;
+ auto-build.h | auto-host.h )
+ build_xm_file_list="${build_xm_file_list} $f"
+ build_xm_include_list="${build_xm_include_list} $f"
+ ;;
+ * )
+ build_xm_file_list="${build_xm_file_list} \$(srcdir)/config/$f"
+ build_xm_include_list="${build_xm_include_list} config/$f"
+ ;;
+ esac
+done
+
+# Define macro CROSS_DIRECTORY_STRUCTURE in compilation if this is a
+# cross-compiler which does not use the native headers and libraries.
+# Also use all.cross instead of all.internal and adjust SYSTEM_HEADER_DIR.
+CROSS= AC_SUBST(CROSS)
+ALL=all.internal AC_SUBST(ALL)
+SYSTEM_HEADER_DIR='$(NATIVE_SYSTEM_HEADER_DIR)' AC_SUBST(SYSTEM_HEADER_DIR)
+BUILD_SYSTEM_HEADER_DIR=$SYSTEM_HEADER_DIR AC_SUBST(BUILD_SYSTEM_HEADER_DIR)
+
+if test x$host != x$target || test "x$TARGET_SYSTEM_ROOT" != x ||
+ test x$build != x$host || test "x$with_build_sysroot" != x; then
+ if test "x$with_build_sysroot" != x; then
+ BUILD_SYSTEM_HEADER_DIR=$with_build_sysroot'$${sysroot_headers_suffix}$(NATIVE_SYSTEM_HEADER_DIR)'
+ else
+ BUILD_SYSTEM_HEADER_DIR='$(CROSS_SYSTEM_HEADER_DIR)'
+ fi
+
+ if test x$host != x$target
+ then
+ CROSS="-DCROSS_DIRECTORY_STRUCTURE"
+ ALL=all.cross
+ SYSTEM_HEADER_DIR=$BUILD_SYSTEM_HEADER_DIR
+ elif test "x$TARGET_SYSTEM_ROOT" != x; then
+ SYSTEM_HEADER_DIR='$(CROSS_SYSTEM_HEADER_DIR)'
+ fi
+
+ if test "x$with_build_sysroot" != "x"; then
+ target_header_dir="${with_build_sysroot}${native_system_header_dir}"
+ elif test "x$with_sysroot" = x; then
+ target_header_dir="${test_exec_prefix}/${target_noncanonical}/sys-include"
+ elif test "x$with_sysroot" = xyes; then
+ target_header_dir="${test_exec_prefix}/${target_noncanonical}/sys-root${native_system_header_dir}"
+ else
+ target_header_dir="${with_sysroot}${native_system_header_dir}"
+ fi
+else
+ target_header_dir=${native_system_header_dir}
+fi
+
+# If this is a cross-compiler that does not
+# have its own set of headers then define
+# inhibit_libc
+
+# If this is using newlib, without having the headers available now,
+# then define inhibit_libc in LIBGCC2_CFLAGS.
+# This prevents libgcc2 from containing any code which requires libc
+# support.
+: ${inhibit_libc=false}
+if { { test x$host != x$target && test "x$with_sysroot" = x ; } ||
+ test x$with_newlib = xyes ; } &&
+ { test "x$with_headers" = xno || test ! -f "$target_header_dir/stdio.h"; } ; then
+ inhibit_libc=true
+fi
+AC_SUBST(inhibit_libc)
+
+# When building gcc with a cross-compiler, we need to adjust things so
+# that the generator programs are still built with the native compiler.
+# Also, we cannot run fixincludes.
+
+# These are the normal (build=host) settings:
+CC_FOR_BUILD='$(CC)' AC_SUBST(CC_FOR_BUILD)
+CXX_FOR_BUILD='$(CXX)' AC_SUBST(CXX_FOR_BUILD)
+BUILD_CFLAGS='$(ALL_CFLAGS)' AC_SUBST(BUILD_CFLAGS)
+BUILD_CXXFLAGS='$(ALL_CXXFLAGS)' AC_SUBST(BUILD_CXXFLAGS)
+BUILD_LDFLAGS='$(LDFLAGS)' AC_SUBST(BUILD_LDFLAGS)
+STMP_FIXINC=stmp-fixinc AC_SUBST(STMP_FIXINC)
+
+# And these apply if build != host, or we are generating coverage data
+if test x$build != x$host || test "x$coverage_flags" != x
+then
+ BUILD_CFLAGS='$(INTERNAL_CFLAGS) $(T_CFLAGS) $(CFLAGS-$@) $(CFLAGS_FOR_BUILD)'
+ BUILD_CXXFLAGS='$(INTERNAL_CFLAGS) $(T_CFLAGS) $(CFLAGS-$@) $(CXXFLAGS_FOR_BUILD)'
+ BUILD_LDFLAGS='$(LDFLAGS_FOR_BUILD)'
+fi
+
+# Expand extra_headers to include complete path.
+# This substitutes for lots of t-* files.
+extra_headers_list=
+# Prepend $(srcdir)/config/${cpu_type}/ to every entry in extra_headers.
+for file in ${extra_headers} ; do
+ extra_headers_list="${extra_headers_list} \$(srcdir)/config/${cpu_type}/${file}"
+done
+
+# If use_gcc_tgmath is set, append ginclude/tgmath.h.
+if test x"$use_gcc_tgmath" = xyes
+then extra_headers_list="${extra_headers_list} \$(srcdir)/ginclude/tgmath.h"
+fi
+
+# Define collect2 in Makefile.
+case $host_can_use_collect2 in
+ no) collect2= ;;
+ *) collect2='collect2$(exeext)' ;;
+esac
+AC_SUBST([collect2])
+
+# Add a definition of USE_COLLECT2 if system wants one.
+case $use_collect2 in
+ no) use_collect2= ;;
+ "") ;;
+ *)
+ host_xm_defines="${host_xm_defines} USE_COLLECT2"
+ xm_defines="${xm_defines} USE_COLLECT2"
+ case $host_can_use_collect2 in
+ no)
+ AC_MSG_ERROR([collect2 is required but cannot be built on this system])
+ ;;
+ esac
+ ;;
+esac
+
+AC_DEFINE_UNQUOTED(LTOPLUGINSONAME,"${host_lto_plugin_soname}",
+[Define to the name of the LTO plugin DSO that must be
+ passed to the linker's -plugin=LIB option.])
+
+# ---------------------------
+# Assembler & linker features
+# ---------------------------
+
+# During stage 2, ld is actually gcc/collect-ld, which is a small script to
+# discern between when to use prev-ld/ld-new and when to use ld/ld-new.
+# However when ld-new is first executed from the build tree, libtool will
+# relink it as .libs/lt-ld-new, so that it can give it an RPATH that refers
+# to the build tree. While doing this we need to use the previous-stage
+# linker, or we have an infinite loop. The presence of a shell script as
+# ld/ld-new, and the fact that the script *uses ld itself*, is what confuses
+# the gcc/collect-ld script. So we need to know how libtool works, or
+# exec-tool will fail.
+
+m4_defun([_LT_CONFIG_COMMANDS], [])
+AC_PROG_LIBTOOL
+AC_SUBST(objdir)
+AC_SUBST(enable_fast_install)
+
+# Identify the assembler which will work hand-in-glove with the newly
+# built GCC, so that we can examine its features. This is the assembler
+# which will be driven by the driver program.
+#
+# If build != host, and we aren't building gas in-tree, we identify a
+# build->target assembler and hope that it will have the same features
+# as the host->target assembler we'll be using.
+gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas
+
+m4_pattern_allow([AS_FOR_TARGET])dnl
+AS_VAR_SET_IF(gcc_cv_as,, [
+if test -x "$DEFAULT_ASSEMBLER"; then
+ gcc_cv_as="$DEFAULT_ASSEMBLER"
+elif test -f $gcc_cv_as_gas_srcdir/configure.ac \
+ && test -f ../gas/Makefile \
+ && test x$build = x$host; then
+ gcc_cv_as=../gas/as-new$build_exeext
+elif test -x as$build_exeext; then
+ # Build using assembler in the current directory.
+ gcc_cv_as=./as$build_exeext
+elif ( set dummy $AS_FOR_TARGET; test -x $[2] ); then
+ gcc_cv_as="$AS_FOR_TARGET"
+else
+ AC_PATH_PROG(gcc_cv_as, $AS_FOR_TARGET)
+fi])
+
+ORIGINAL_AS_FOR_TARGET=$gcc_cv_as
+AC_SUBST(ORIGINAL_AS_FOR_TARGET)
+case "$ORIGINAL_AS_FOR_TARGET" in
+ ./as | ./as$build_exeext) ;;
+ *) AC_CONFIG_FILES(as:exec-tool.in, [chmod +x as]) ;;
+esac
+
+default_ld=
+AC_ARG_ENABLE(ld,
+[[ --enable-ld[=ARG] build ld [ARG={default,yes,no}]]],
+[case "${enableval}" in
+ no)
+ default_ld=ld.gold
+ ;;
+ esac])
+
+install_gold_as_default=no
+AC_ARG_ENABLE(gold,
+[[ --enable-gold[=ARG] build gold [ARG={default,yes,no}]]],
+[case "${enableval}" in
+ default)
+ install_gold_as_default=yes
+ ;;
+ yes)
+ if test x${default_ld} != x; then
+ install_gold_as_default=yes
+ fi
+ ;;
+ no)
+ ;;
+ *)
+ AC_MSG_ERROR([invalid --enable-gold argument])
+ ;;
+ esac])
+
+# Identify the linker which will work hand-in-glove with the newly
+# built GCC, so that we can examine its features. This is the linker
+# which will be driven by the driver program.
+#
+# If build != host, and we aren't building gas in-tree, we identify a
+# build->target linker and hope that it will have the same features
+# as the host->target linker we'll be using.
+gcc_cv_gld_major_version=
+gcc_cv_gld_minor_version=
+gcc_cv_ld_gld_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/ld
+gcc_cv_ld_gold_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gold
+gcc_cv_ld_bfd_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/bfd
+
+AS_VAR_SET_IF(gcc_cv_ld,, [
+if test -x "$DEFAULT_LINKER"; then
+ gcc_cv_ld="$DEFAULT_LINKER"
+elif test $install_gold_as_default = yes \
+ && test -f $gcc_cv_ld_gold_srcdir/configure.ac \
+ && test -f ../gold/Makefile \
+ && test x$build = x$host; then
+ gcc_cv_ld=../gold/ld-new$build_exeext
+elif test -f $gcc_cv_ld_gld_srcdir/configure.ac \
+ && test -f ../ld/Makefile \
+ && test x$build = x$host; then
+ gcc_cv_ld=../ld/ld-new$build_exeext
+elif test -x collect-ld$build_exeext; then
+ # Build using linker in the current directory.
+ gcc_cv_ld=./collect-ld$build_exeext
+elif ( set dummy $LD_FOR_TARGET; test -x $[2] ); then
+ gcc_cv_ld="$LD_FOR_TARGET"
+else
+ AC_PATH_PROG(gcc_cv_ld, $LD_FOR_TARGET)
+fi])
+
+ORIGINAL_PLUGIN_LD_FOR_TARGET=$gcc_cv_ld
+PLUGIN_LD_SUFFIX=`basename $gcc_cv_ld | sed -e "s,$target_alias-,,"`
+# if the PLUGIN_LD is set ld-new, just have it as ld
+# as that is the installed named.
+if test x$PLUGIN_LD_SUFFIX = xld-new \
+ || test x$PLUGIN_LD_SUFFIX = xcollect-ld ; then
+ PLUGIN_LD_SUFFIX=ld
+fi
+AC_ARG_WITH(plugin-ld,
+[AS_HELP_STRING([[--with-plugin-ld=[ARG]]], [specify the plugin linker])],
+[if test x"$withval" != x; then
+ ORIGINAL_PLUGIN_LD_FOR_TARGET="$withval"
+ PLUGIN_LD_SUFFIX="$withval"
+ fi])
+AC_SUBST(ORIGINAL_PLUGIN_LD_FOR_TARGET)
+AC_DEFINE_UNQUOTED(PLUGIN_LD_SUFFIX, "$PLUGIN_LD_SUFFIX", [Specify plugin linker])
+
+# Check to see if we are using gold instead of ld
+AC_MSG_CHECKING(whether we are using gold)
+ld_is_gold=no
+if test x$gcc_cv_ld != x; then
+ if $gcc_cv_ld --version 2>/dev/null | sed 1q \
+ | grep "GNU gold" > /dev/null; then
+ ld_is_gold=yes
+ fi
+fi
+AC_MSG_RESULT($ld_is_gold)
+
+# Check to see if we are using mold instead of ld
+AC_MSG_CHECKING(whether we are using mold)
+ld_is_mold=no
+if test x$gcc_cv_ld != x; then
+ if $gcc_cv_ld --version 2>/dev/null | sed 1q \
+ | grep "mold" > /dev/null; then
+ ld_is_mold=yes
+ fi
+fi
+AC_MSG_RESULT($ld_is_mold)
+
+
+AC_MSG_CHECKING(gold linker with split stack support as non default)
+# Check to see if default ld is not gold, but gold is
+# available and has support for split stack. If gcc was configured
+# with gold then no checking is done.
+#
+if test x$ld_is_gold = xno && which ${gcc_cv_ld}.gold >/dev/null 2>&1; then
+
+# For platforms other than powerpc64*, enable as appropriate.
+
+ gold_non_default=no
+ ld_gold=`which ${gcc_cv_ld}.gold`
+# Make sure this gold has minimal split stack support
+ if $ld_gold --help 2>/dev/null | grep split-stack-adjust-size >/dev/null 2>&1; then
+ ld_vers=`$ld_gold --version | sed 1q`
+ gold_vers=`echo $ld_vers | sed -n \
+ -e 's,^[[^)]]*[[ ]]\([[0-9]][[0-9]]*\.[[0-9]][[0-9]]*[[^)]]*\)) .*$,\1,p'`
+ case $target in
+# check that the gold version contains the complete split stack support
+# on powerpc64 big and little endian
+ powerpc64*-*-*)
+ case "$gold_vers" in
+ 2.25.[[1-9]]*|2.2[[6-9]][[.0-9]]*|2.[[3-9]][[.0-9]]*|[[3-9]].[[.0-9]]*) gold_non_default=yes
+ ;;
+ *) gold_non_default=no
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ if test $gold_non_default = yes; then
+ AC_DEFINE(HAVE_GOLD_NON_DEFAULT_SPLIT_STACK, 1,
+ [Define if the gold linker supports split stack and is available as a non-default])
+ fi
+fi
+AC_MSG_RESULT($gold_non_default)
+
+ORIGINAL_LD_FOR_TARGET=$gcc_cv_ld
+AC_SUBST(ORIGINAL_LD_FOR_TARGET)
+case "$ORIGINAL_LD_FOR_TARGET" in
+ ./collect-ld | ./collect-ld$build_exeext) ;;
+ *) AC_CONFIG_FILES(collect-ld:exec-tool.in, [chmod +x collect-ld]) ;;
+esac
+
+AC_MSG_CHECKING(what linker to use)
+if test "$gcc_cv_ld" = ../ld/ld-new$build_exeext \
+ || test "$gcc_cv_ld" = ../gold/ld-new$build_exeext; then
+ # Single tree build which includes ld. We want to prefer it
+ # over whatever linker top-level may have detected, since
+ # we'll use what we're building after installation anyway.
+ AC_MSG_RESULT(newly built ld)
+ in_tree_ld=yes
+ in_tree_ld_is_elf=no
+ if (grep 'EMUL = .*elf' ../ld/Makefile \
+ || grep 'EMUL = .*linux' ../ld/Makefile \
+ || grep 'EMUL = .*lynx' ../ld/Makefile) > /dev/null; then
+ in_tree_ld_is_elf=yes
+ elif test "$ld_is_gold" = yes; then
+ in_tree_ld_is_elf=yes
+ fi
+ for f in $gcc_cv_ld_bfd_srcdir/configure $gcc_cv_ld_gld_srcdir/configure $gcc_cv_ld_gld_srcdir/configure.ac $gcc_cv_ld_gld_srcdir/Makefile.in
+ do
+changequote(,)dnl
+ gcc_cv_gld_version=`sed -n -e 's/^[ ]*VERSION=[^0-9A-Za-z_]*\([0-9]*\.[0-9]*.*\)/VERSION=\1/p' < $f`
+ if test x$gcc_cv_gld_version != x; then
+ break
+ fi
+ done
+ case $gcc_cv_gld_version in
+ VERSION=[0-9]*) ;;
+changequote([,])dnl
+ *) AC_MSG_ERROR([[cannot find version of in-tree linker]]) ;;
+changequote(,)dnl
+ esac
+ gcc_cv_gld_major_version=`expr "$gcc_cv_gld_version" : "VERSION=\([0-9]*\)"`
+ gcc_cv_gld_minor_version=`expr "$gcc_cv_gld_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
+changequote([,])dnl
+ ORIGINAL_LD_BFD_FOR_TARGET=../ld/ld-new$build_exeext
+ ORIGINAL_LD_GOLD_FOR_TARGET=../gold/ld-new$build_exeext
+else
+ AC_MSG_RESULT($gcc_cv_ld)
+ in_tree_ld=no
+ gcc_cvs_ld_program=`dirname $gcc_cv_ld`/`basename $gcc_cv_ld $host_exeext`
+ ORIGINAL_LD_BFD_FOR_TARGET=${gcc_cvs_ld_program}.bfd$host_exeext
+ ORIGINAL_LD_GOLD_FOR_TARGET=${gcc_cvs_ld_program}.gold$host_exeext
+fi
+
+AC_SUBST(ORIGINAL_LD_BFD_FOR_TARGET)
+AC_SUBST(ORIGINAL_LD_GOLD_FOR_TARGET)
+
+# Figure out what nm we will be using.
+gcc_cv_binutils_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/binutils
+AS_VAR_SET_IF(gcc_cv_nm,, [
+if test -f $gcc_cv_binutils_srcdir/configure.ac \
+ && test -f ../binutils/Makefile \
+ && test x$build = x$host; then
+ gcc_cv_nm=../binutils/nm-new$build_exeext
+elif test -x nm$build_exeext; then
+ gcc_cv_nm=./nm$build_exeext
+elif ( set dummy $NM_FOR_TARGET; test -x $[2] ); then
+ gcc_cv_nm="$NM_FOR_TARGET"
+else
+ AC_PATH_PROG(gcc_cv_nm, $NM_FOR_TARGET)
+fi])
+
+AC_MSG_CHECKING(what nm to use)
+if test "$gcc_cv_nm" = ../binutils/nm-new$build_exeext; then
+ # Single tree build which includes binutils.
+ AC_MSG_RESULT(newly built nm)
+ in_tree_nm=yes
+else
+ AC_MSG_RESULT($gcc_cv_nm)
+ in_tree_nm=no
+fi
+
+ORIGINAL_NM_FOR_TARGET=$gcc_cv_nm
+AC_SUBST(ORIGINAL_NM_FOR_TARGET)
+case "$ORIGINAL_NM_FOR_TARGET" in
+ ./nm | ./nm$build_exeext) ;;
+ *) AC_CONFIG_FILES(nm:exec-tool.in, [chmod +x nm]) ;;
+esac
+
+
+# Figure out what objdump we will be using.
+AS_VAR_SET_IF(gcc_cv_objdump,, [
+if test -f $gcc_cv_binutils_srcdir/configure.ac \
+ && test -f ../binutils/Makefile \
+ && test x$build = x$host; then
+ # Single tree build which includes binutils.
+ gcc_cv_objdump=../binutils/objdump$build_exeext
+elif test -x objdump$build_exeext; then
+ gcc_cv_objdump=./objdump$build_exeext
+elif ( set dummy $OBJDUMP_FOR_TARGET; test -x $[2] ); then
+ gcc_cv_objdump="$OBJDUMP_FOR_TARGET"
+else
+ AC_PATH_PROG(gcc_cv_objdump, $OBJDUMP_FOR_TARGET)
+fi])
+
+AC_MSG_CHECKING(what objdump to use)
+if test "$gcc_cv_objdump" = ../binutils/objdump$build_exeext; then
+ # Single tree build which includes binutils.
+ AC_MSG_RESULT(newly built objdump)
+elif test x$gcc_cv_objdump = x; then
+ AC_MSG_RESULT(not found)
+else
+ AC_MSG_RESULT($gcc_cv_objdump)
+fi
+
+# Figure out what readelf we will be using.
+AS_VAR_SET_IF(gcc_cv_readelf,, [
+if test -f $gcc_cv_binutils_srcdir/configure.ac \
+ && test -f ../binutils/Makefile \
+ && test x$build = x$host; then
+ # Single tree build which includes binutils.
+ gcc_cv_readelf=../binutils/readelf$build_exeext
+elif test -x readelf$build_exeext; then
+ gcc_cv_readelf=./readelf$build_exeext
+elif ( set dummy $READELF_FOR_TARGET; test -x $[2] ); then
+ gcc_cv_readelf="$READELF_FOR_TARGET"
+else
+ AC_PATH_PROG(gcc_cv_readelf, $READELF_FOR_TARGET)
+fi])
+
+AC_MSG_CHECKING(what readelf to use)
+if test "$gcc_cv_readelf" = ../binutils/readelf$build_exeext; then
+ # Single tree build which includes binutils.
+ AC_MSG_RESULT(newly built readelf)
+elif test x$gcc_cv_readelf = x; then
+ AC_MSG_RESULT(not found)
+else
+ AC_MSG_RESULT($gcc_cv_readelf)
+fi
+
+# Figure out what otool we will be using.
+AS_VAR_SET_IF(gcc_cv_otool,, [
+if test -x otool$build_exeext; then
+ gcc_cv_otool=./otool$build_exeext
+elif ( set dummy $OTOOL_FOR_TARGET; test -x $[2] ); then
+ gcc_cv_otool="$OTOOL_FOR_TARGET"
+else
+ AC_PATH_PROG(gcc_cv_otool, $OTOOL_FOR_TARGET)
+fi])
+
+AC_MSG_CHECKING(what otool to use)
+if test x$gcc_cv_otool = x; then
+ AC_MSG_RESULT(not found)
+else
+ AC_MSG_RESULT($gcc_cv_otool)
+fi
+
+# Figure out the dsymutil we will use.
+AS_VAR_SET_IF(gcc_cv_dsymutil,, [
+if test -x "$DEFAULT_DSYMUTIL"; then
+ gcc_cv_dsymutil="$DEFAULT_DSYMUTIL"
+elif test -x dsymutil$build_exeext; then
+ gcc_cv_dsymutil=./dsymutil$build_exeext
+elif ( set dummy $DSYMUTIL_FOR_TARGET; test -x $[2] ); then
+ gcc_cv_dsymutil=$DSYMUTIL_FOR_TARGET
+elif ( set dummy $DSYMUTIL; test -x $[2] ); then
+ gcc_cv_dsymutil=$DSYMUTIL
+else
+ AC_PATH_PROG(gcc_cv_dsymutil, $DSYMUTIL_FOR_TARGET)
+fi])
+
+ORIGINAL_DSYMUTIL_FOR_TARGET=$gcc_cv_dsymutil
+AC_SUBST(ORIGINAL_DSYMUTIL_FOR_TARGET)
+case "$ORIGINAL_DSYMUTIL_FOR_TARGET" in
+ ./dsymutil | ./dsymutil$build_exeext) ;;
+ *) AC_CONFIG_FILES(dsymutil:exec-tool.in, [chmod +x dsymutil]) ;;
+esac
+
+# Figure out what assembler alignment features are present.
+gcc_GAS_CHECK_FEATURE([.balign and .p2align], gcc_cv_as_balign_and_p2align,,
+[.balign 4
+.p2align 2],,
+[AC_DEFINE(HAVE_GAS_BALIGN_AND_P2ALIGN, 1,
+ [Define if your assembler supports .balign and .p2align.])])
+
+gcc_GAS_CHECK_FEATURE([.p2align with maximum skip], gcc_cv_as_max_skip_p2align,,
+ [.p2align 4,,7],,
+[AC_DEFINE(HAVE_GAS_MAX_SKIP_P2ALIGN, 1,
+ [Define if your assembler supports specifying the maximum number
+ of bytes to skip when using the GAS .p2align command.])])
+
+gcc_GAS_CHECK_FEATURE([.literal16], gcc_cv_as_literal16,,
+ [.literal16],,
+[AC_DEFINE(HAVE_GAS_LITERAL16, 1,
+ [Define if your assembler supports .literal16.])])
+
+gcc_GAS_CHECK_FEATURE([working .subsection -1], gcc_cv_as_subsection_m1,,
+ [conftest_label1: .word 0
+.subsection -1
+conftest_label2: .word 0
+.previous],
+ [if test x$gcc_cv_nm != x; then
+ $gcc_cv_nm conftest.o | grep conftest_label1 > conftest.nm1
+ $gcc_cv_nm conftest.o | grep conftest_label2 | sed -e 's/label2/label1/' > conftest.nm2
+ if cmp conftest.nm1 conftest.nm2 > /dev/null 2>&1
+ then :
+ else gcc_cv_as_subsection_m1=yes
+ fi
+ rm -f conftest.nm1 conftest.nm2
+ fi],
+ [AC_DEFINE(HAVE_GAS_SUBSECTION_ORDERING, 1,
+ [Define if your assembler supports .subsection and .subsection -1 starts
+ emitting at the beginning of your section.])])
+
+gcc_GAS_CHECK_FEATURE([.weak], gcc_cv_as_weak,,
+ [ .weak foobar],,
+[AC_DEFINE(HAVE_GAS_WEAK, 1, [Define if your assembler supports .weak.])])
+
+gcc_GAS_CHECK_FEATURE([.weakref], gcc_cv_as_weakref,,
+ [ .weakref foobar, barfnot],,
+[AC_DEFINE(HAVE_GAS_WEAKREF, 1, [Define if your assembler supports .weakref.])])
+
+gcc_GAS_CHECK_FEATURE([.nsubspa comdat], gcc_cv_as_nsubspa_comdat,,
+ [ .SPACE $TEXT$
+ .NSUBSPA $CODE$,COMDAT],,
+[AC_DEFINE(HAVE_GAS_NSUBSPA_COMDAT, 1, [Define if your assembler supports .nsubspa comdat option.])])
+
+# .hidden needs to be supported in both the assembler and the linker,
+# because GNU LD versions before 2.12.1 have buggy support for STV_HIDDEN.
+# This is irritatingly difficult to feature test for; we have to check the
+# date string after the version number. If we've got an in-tree
+# ld, we don't know its patchlevel version, so we set the baseline at 2.13
+# to be safe.
+# The gcc_GAS_CHECK_FEATURE call just sets a cache variable.
+case "${target}" in
+ *-*-aix*)
+ conftest_s=' .globl foobar,hidden'
+ ;;
+ *)
+ conftest_s=' .hidden foobar
+foobar:'
+ ;;
+esac
+gcc_GAS_CHECK_FEATURE([.hidden], gcc_cv_as_hidden,, [$conftest_s])
+case "${target}" in
+ *-*-darwin*)
+ # Darwin as has some visibility support, though with a different syntax.
+ gcc_cv_as_hidden=yes
+ ;;
+esac
+
+# gnu_indirect_function type is an extension proposed at
+# http://groups.google/com/group/generic-abi/files. It allows dynamic runtime
+# selection of function implementation
+AC_ARG_ENABLE(gnu-indirect-function,
+ [AS_HELP_STRING([--enable-gnu-indirect-function],
+ [enable the use of the @gnu_indirect_function to glibc systems])],
+ [case $enable_gnu_indirect_function in
+ yes | no) ;;
+ *) AC_MSG_ERROR(['$enable_gnu_indirect_function' is an invalid value for --enable-gnu-indirect-function.
+Valid choices are 'yes' and 'no'.]) ;;
+ esac],
+ [enable_gnu_indirect_function="$default_gnu_indirect_function"])
+
+case "${target}" in
+ riscv*-*-linux*)
+ AC_MSG_CHECKING(linker ifunc IRELATIVE support)
+ cat > conftest.s <<EOF
+ .text
+ .type foo_resolver, @function
+foo_resolver:
+ ret
+ .size foo_resolver, .-foo_resolver
+
+ .globl foo
+ .type foo, %gnu_indirect_function
+ .set foo, foo_resolver
+
+ .globl bar
+ .type bar, @function
+bar:
+ call foo
+ ret
+ .size bar, .-bar
+EOF
+ if test x$gcc_cv_as != x \
+ && test x$gcc_cv_ld != x \
+ && test x$gcc_cv_readelf != x \
+ && $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1 \
+ && $gcc_cv_ld -o conftest conftest.o > /dev/null 2>&1 \
+ && $gcc_cv_readelf --relocs --wide conftest \
+ | grep R_RISCV_IRELATIVE > /dev/null 2>&1; then
+ enable_gnu_indirect_function=yes
+ fi
+ rm -f conftest conftest.o conftest.s
+ AC_MSG_RESULT($enable_gnu_indirect_function)
+ ;;
+esac
+
+gif=`if test x$enable_gnu_indirect_function = xyes; then echo 1; else echo 0; fi`
+AC_DEFINE_UNQUOTED(HAVE_GNU_INDIRECT_FUNCTION, $gif,
+[Define if your system supports gnu indirect functions.])
+
+
+changequote(,)dnl
+if test $in_tree_ld != yes ; then
+ ld_ver=`$gcc_cv_ld --version 2>/dev/null | sed 1q`
+ if echo "$ld_ver" | grep GNU > /dev/null; then
+ if test x"$ld_is_gold" = xyes; then
+ # GNU gold --version looks like this:
+ #
+ # GNU gold (GNU Binutils 2.21.51.20110225) 1.11
+ #
+ # We extract the binutils version which is more familiar and specific
+ # than the gold version.
+ ld_vers=`echo $ld_ver | sed -n \
+ -e 's,^[^)]*[ ]\([0-9][0-9]*\.[0-9][0-9]*[^)]*\)) .*$,\1,p'`
+ else
+ # GNU ld --version looks like this:
+ #
+ # GNU ld (GNU Binutils) 2.21.51.20110225
+ ld_vers=`echo $ld_ver | sed -n \
+ -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*.*\)$,\1,p'`
+ fi
+ ld_date=`echo $ld_ver | sed -n 's,^.*\([2-9][0-9][0-9][0-9]\)\(-*\)\([01][0-9]\)\2\([0-3][0-9]\).*$,\1\3\4,p'`
+ ld_vers_major=`expr "$ld_vers" : '\([0-9]*\)'`
+ ld_vers_minor=`expr "$ld_vers" : '[0-9]*\.\([0-9]*\)'`
+ ld_vers_patch=`expr "$ld_vers" : '[0-9]*\.[0-9]*\.\([0-9]*\)'`
+ else
+ case "${target}" in
+ *-*-solaris2*)
+ # Solaris 2 ld -V output looks like this for a regular version:
+ #
+ # ld: Software Generation Utilities - Solaris Link Editors: 5.11-1.1699
+ #
+ # but test versions add stuff at the end:
+ #
+ # ld: Software Generation Utilities - Solaris Link Editors: 5.11-1.1701:onnv-ab196087-6931056-03/25/10
+ #
+ # ld and ld.so.1 are guaranteed to be updated in lockstep, so ld version
+ # numbers can be used in ld.so.1 feature checks even if a different
+ # linker is configured.
+ ld_ver=`$gcc_cv_ld -V 2>&1`
+ if echo "$ld_ver" | grep 'Solaris Link Editors' > /dev/null; then
+ ld_vers=`echo $ld_ver | sed -n \
+ -e 's,^.*: 5\.[0-9][0-9]*-\([0-9]\.[0-9][0-9]*\).*$,\1,p'`
+ ld_vers_major=`expr "$ld_vers" : '\([0-9]*\)'`
+ ld_vers_minor=`expr "$ld_vers" : '[0-9]*\.\([0-9]*\)'`
+ fi
+ ;;
+ esac
+ fi
+fi
+changequote([,])dnl
+
+AC_CACHE_CHECK(linker for .hidden support, gcc_cv_ld_hidden,
+[[if test $in_tree_ld = yes ; then
+ gcc_cv_ld_hidden=no
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 13 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_hidden=yes
+ fi
+else
+ gcc_cv_ld_hidden=yes
+ if test x"$ld_is_gold" = xyes; then
+ :
+ elif test x"$ld_is_mold" = xyes; then
+ :
+ elif echo "$ld_ver" | grep GNU > /dev/null; then
+ if test 0"$ld_date" -lt 20020404; then
+ if test -n "$ld_date"; then
+ # If there was date string, but was earlier than 2002-04-04, fail
+ gcc_cv_ld_hidden=no
+ elif test -z "$ld_vers"; then
+ # If there was no date string nor ld version number, something is wrong
+ gcc_cv_ld_hidden=no
+ else
+ test -z "$ld_vers_patch" && ld_vers_patch=0
+ if test "$ld_vers_major" -lt 2; then
+ gcc_cv_ld_hidden=no
+ elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 12; then
+ gcc_cv_ld_hidden="no"
+ elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -eq 12 -a "$ld_vers_patch" -eq 0; then
+ gcc_cv_ld_hidden=no
+ fi
+ fi
+ fi
+ else
+ case "${target}" in
+ *-*-aix[789]*)
+ gcc_cv_ld_hidden=yes
+ ;;
+ *-*-darwin*)
+ # Darwin ld has some visibility support.
+ gcc_cv_ld_hidden=yes
+ ;;
+ hppa64*-*-hpux* | ia64*-*-hpux*)
+ gcc_cv_ld_hidden=yes
+ ;;
+ *-*-solaris2*)
+ # Support for .hidden in Sun ld appeared in Solaris 9 FCS, but
+ # .symbolic was only added in Solaris 9 12/02.
+ gcc_cv_ld_hidden=yes
+ ;;
+ *)
+ gcc_cv_ld_hidden=no
+ ;;
+ esac
+ fi
+fi]])
+libgcc_visibility=no
+AC_SUBST(libgcc_visibility)
+GCC_TARGET_TEMPLATE([HAVE_GAS_HIDDEN])
+if test $gcc_cv_as_hidden = yes && test $gcc_cv_ld_hidden = yes; then
+ libgcc_visibility=yes
+ AC_DEFINE(HAVE_GAS_HIDDEN, 1,
+ [Define if your assembler and linker support .hidden.])
+fi
+
+AC_MSG_CHECKING(linker read-only and read-write section mixing)
+gcc_cv_ld_ro_rw_mix=unknown
+if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 10 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_ro_rw_mix=read-write
+ fi
+elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x -a x$gcc_cv_objdump != x ; then
+ echo '.section myfoosect, "a"' > conftest1.s
+ echo '.section myfoosect, "aw"' > conftest2.s
+ echo '.byte 1' >> conftest2.s
+ echo '.section myfoosect, "a"' > conftest3.s
+ echo '.byte 0' >> conftest3.s
+ if $gcc_cv_as -o conftest1.o conftest1.s > /dev/null 2>&1 \
+ && $gcc_cv_as -o conftest2.o conftest2.s > /dev/null 2>&1 \
+ && $gcc_cv_as -o conftest3.o conftest3.s > /dev/null 2>&1 \
+ && $gcc_cv_ld -shared -o conftest1.so conftest1.o \
+ conftest2.o conftest3.o > /dev/null 2>&1; then
+ gcc_cv_ld_ro_rw_mix=`$gcc_cv_objdump -h conftest1.so \
+ | sed -e '/myfoosect/!d' -e N`
+ if echo "$gcc_cv_ld_ro_rw_mix" | grep CONTENTS > /dev/null; then
+ if echo "$gcc_cv_ld_ro_rw_mix" | grep READONLY > /dev/null; then
+ gcc_cv_ld_ro_rw_mix=read-only
+ else
+ gcc_cv_ld_ro_rw_mix=read-write
+ fi
+ fi
+ fi
+changequote(,)dnl
+ rm -f conftest.* conftest[123].*
+changequote([,])dnl
+fi
+if test x$gcc_cv_ld_ro_rw_mix = xread-write; then
+ AC_DEFINE(HAVE_LD_RO_RW_SECTION_MIXING, 1,
+ [Define if your linker links a mix of read-only
+ and read-write sections into a read-write section.])
+fi
+AC_MSG_RESULT($gcc_cv_ld_ro_rw_mix)
+
+gcc_AC_INITFINI_ARRAY
+
+# Check if we have .[us]leb128, and support symbol arithmetic with it.
+# Older versions of GAS and some non-GNU assemblers, have a bugs handling
+# these directives, even when they appear to accept them.
+gcc_GAS_CHECK_FEATURE([.sleb128 and .uleb128], gcc_cv_as_leb128,,
+[ .data
+ .uleb128 L2 - L1
+L1:
+ .uleb128 1280
+ .sleb128 -1010
+L2:
+ .uleb128 0x8000000000000000
+],
+[[
+if test "x$gcc_cv_objdump" != x; then
+ if $gcc_cv_objdump -s conftest.o 2>/dev/null \
+ | grep '04800a8e 78808080 80808080 808001' >/dev/null; then
+ gcc_cv_as_leb128=yes
+ fi
+elif test "x$gcc_cv_otool" != x; then
+ if $gcc_cv_otool -d conftest.o 2>/dev/null \
+ | grep '04 80 0a 8e 78 80 80 80 80 80 80 80 80 80 01' >/dev/null; then
+ gcc_cv_as_leb128=yes
+ fi
+else
+ # play safe, assume the assembler is broken.
+ :
+fi
+]],
+ [AC_DEFINE(HAVE_AS_LEB128, 1,
+ [Define if your assembler supports .sleb128 and .uleb128.])],
+ [AC_DEFINE(HAVE_AS_LEB128, 0,
+ [Define if your assembler supports .sleb128 and .uleb128.])])
+
+# Determine if an .eh_frame section is read-only.
+gcc_fn_eh_frame_ro () {
+ $gcc_cv_as $1 -o conftest.o conftest.s > /dev/null 2>&1 && \
+ $gcc_cv_objdump -h conftest.o 2>/dev/null | \
+ sed -e '/.eh_frame/!d' -e N | grep READONLY > /dev/null
+}
+
+# Check if we have assembler support for unwind directives.
+gcc_GAS_CHECK_FEATURE([cfi directives], gcc_cv_as_cfi_directive,,
+[ .text
+ .cfi_startproc
+ .cfi_offset 0, 0
+ .cfi_same_value 1
+ .cfi_def_cfa 1, 2
+ .cfi_escape 1, 2, 3, 4, 5
+ .cfi_endproc],
+[case "$target" in
+ *-*-solaris*)
+ # If the linker used on Solaris (like Sun ld) isn't capable of merging
+ # read-only and read-write sections, we need to make sure that the
+ # assembler used emits read-write .eh_frame sections.
+ if test "x$gcc_cv_ld_ro_rw_mix" = xread-write; then
+ gcc_cv_as_cfi_directive=yes
+ elif test "x$gcc_cv_objdump" = x; then
+ # No objdump, err on the side of caution.
+ gcc_cv_as_cfi_directive=no
+ else
+ if test x$gas = xyes; then
+ as_32_opt="--32"
+ as_64_opt="--64"
+ else
+ as_32_opt="-m32"
+ as_64_opt="-m64"
+ fi
+ case "$target" in
+ sparc*-*-solaris2.*)
+ # On Solaris/SPARC, .eh_frame sections should always be read-write.
+ if gcc_fn_eh_frame_ro $as_32_opt \
+ || gcc_fn_eh_frame_ro $as_64_opt; then
+ gcc_cv_as_cfi_directive=no
+ else
+ gcc_cv_as_cfi_directive=yes
+ fi
+ ;;
+ i?86-*-solaris2.* | x86_64-*-solaris2.*)
+ # On Solaris/x86, make sure that GCC and assembler agree on using
+ # read-only .eh_frame sections for 64-bit.
+ if gcc_fn_eh_frame_ro $as_32_opt; then
+ gcc_cv_as_cfi_directive=no
+ elif gcc_fn_eh_frame_ro $as_64_opt; then
+ gcc_cv_as_cfi_directive=yes
+ else
+ gcc_cv_as_cfi_directive=no
+ fi
+ ;;
+ esac
+ fi
+ ;;
+ *-*-*)
+ gcc_cv_as_cfi_directive=yes
+ ;;
+esac])
+if test $gcc_cv_as_cfi_directive = yes && test x$gcc_cv_objdump != x; then
+gcc_GAS_CHECK_FEATURE([working cfi advance], gcc_cv_as_cfi_advance_working,,
+[ .text
+ .cfi_startproc
+ .cfi_adjust_cfa_offset 64
+ .skip 75040, 0
+ .cfi_adjust_cfa_offset 128
+ .cfi_endproc],
+[[
+if $gcc_cv_objdump -Wf conftest.o 2>/dev/null \
+ | grep 'DW_CFA_advance_loc[24]:[ ][ ]*75040[ ]' >/dev/null; then
+ gcc_cv_as_cfi_advance_working=yes
+fi
+]])
+else
+ # no objdump, err on the side of caution
+ gcc_cv_as_cfi_advance_working=no
+fi
+GCC_TARGET_TEMPLATE(HAVE_GAS_CFI_DIRECTIVE)
+AC_DEFINE_UNQUOTED(HAVE_GAS_CFI_DIRECTIVE,
+ [`if test $gcc_cv_as_cfi_directive = yes \
+ && test $gcc_cv_as_cfi_advance_working = yes; then echo 1; else echo 0; fi`],
+ [Define 0/1 if your assembler supports CFI directives.])
+
+GCC_TARGET_TEMPLATE(HAVE_GAS_CFI_PERSONALITY_DIRECTIVE)
+gcc_GAS_CHECK_FEATURE([cfi personality directive],
+ gcc_cv_as_cfi_personality_directive,,
+[ .text
+ .cfi_startproc
+ .cfi_personality 0, symbol
+ .cfi_endproc])
+AC_DEFINE_UNQUOTED(HAVE_GAS_CFI_PERSONALITY_DIRECTIVE,
+ [`if test $gcc_cv_as_cfi_personality_directive = yes; then echo 1; else echo 0; fi`],
+ [Define 0/1 if your assembler supports .cfi_personality.])
+
+gcc_GAS_CHECK_FEATURE([cfi sections directive],
+ gcc_cv_as_cfi_sections_directive,,
+[ .text
+ .cfi_sections .debug_frame, .eh_frame
+ .cfi_startproc
+ .cfi_endproc],
+[case $target_os in
+ win32 | pe | cygwin* | mingw32*)
+ # Need to check that we generated the correct relocation for the
+ # .debug_frame section. This was fixed for binutils 2.21.
+ gcc_cv_as_cfi_sections_directive=no
+ if test "x$gcc_cv_objdump" != x; then
+ if $gcc_cv_objdump -j .debug_frame -r conftest.o 2>/dev/null | \
+ grep secrel > /dev/null; then
+ gcc_cv_as_cfi_sections_directive=yes
+ fi
+ fi
+ ;;
+ *)
+ gcc_cv_as_cfi_sections_directive=yes
+ ;;
+esac])
+GCC_TARGET_TEMPLATE(HAVE_GAS_CFI_SECTIONS_DIRECTIVE)
+AC_DEFINE_UNQUOTED(HAVE_GAS_CFI_SECTIONS_DIRECTIVE,
+ [`if test $gcc_cv_as_cfi_sections_directive = yes; then echo 1; else echo 0; fi`],
+ [Define 0/1 if your assembler supports .cfi_sections.])
+
+# GAS versions up to and including 2.11.0 may mis-optimize
+# .eh_frame data.
+gcc_GAS_CHECK_FEATURE(eh_frame optimization, gcc_cv_as_eh_frame,,
+[ .text
+.LFB1:
+ .4byte 0
+.L1:
+ .4byte 0
+.LFE1:
+ .section .eh_frame,"aw",@progbits
+__FRAME_BEGIN__:
+ .4byte .LECIE1-.LSCIE1
+.LSCIE1:
+ .4byte 0x0
+ .byte 0x1
+ .ascii "z\0"
+ .byte 0x1
+ .byte 0x78
+ .byte 0x1a
+ .byte 0x0
+ .byte 0x4
+ .4byte 1
+ .p2align 1
+.LECIE1:
+.LSFDE1:
+ .4byte .LEFDE1-.LASFDE1
+.LASFDE1:
+ .4byte .LASFDE1-__FRAME_BEGIN__
+ .4byte .LFB1
+ .4byte .LFE1-.LFB1
+ .byte 0x4
+ .4byte .LFE1-.LFB1
+ .byte 0x4
+ .4byte .L1-.LFB1
+.LEFDE1:],
+[ dnl # For autoconf 2.5x, must protect trailing spaces with @&t@.
+cat > conftest.lit <<EOF
+ 0000 10000000 00000000 017a0001 781a0004 .........z..x...
+ 0010 01000000 12000000 18000000 00000000 ................
+ 0020 08000000 04080000 0044 .........D @&t@
+EOF
+cat > conftest.big <<EOF
+ 0000 00000010 00000000 017a0001 781a0004 .........z..x...
+ 0010 00000001 00000012 00000018 00000000 ................
+ 0020 00000008 04000000 0844 .........D @&t@
+EOF
+ # If the assembler didn't choke, and we can objdump,
+ # and we got the correct data, then succeed.
+ # The text in the here-document typically retains its unix-style line
+ # endings, while the output of objdump will use host line endings.
+ # Therefore, use diff -b for the comparisons.
+ if test x$gcc_cv_objdump != x \
+ && $gcc_cv_objdump -s -j .eh_frame conftest.o 2>/dev/null \
+ | tail -3 > conftest.got \
+ && { diff -b conftest.lit conftest.got > /dev/null 2>&1 \
+ || diff -b conftest.big conftest.got > /dev/null 2>&1; }
+ then
+ gcc_cv_as_eh_frame=yes
+ elif AC_TRY_COMMAND($gcc_cv_as -o conftest.o --traditional-format /dev/null); then
+ gcc_cv_as_eh_frame=buggy
+ else
+ # Uh oh, what do we do now?
+ gcc_cv_as_eh_frame=no
+ fi])
+
+if test $gcc_cv_as_eh_frame = buggy; then
+ AC_DEFINE(USE_AS_TRADITIONAL_FORMAT, 1,
+ [Define if your assembler mis-optimizes .eh_frame data.])
+fi
+
+# Test if the assembler supports the section flag 'e' or #exclude for
+# specifying an excluded section.
+gcc_GAS_CHECK_FEATURE([section exclude flag], gcc_cv_as_section_exclude_e,
+ [--fatal-warnings],
+ [.section foo1,"e"
+ .byte 0,0,0,0])
+if test $gcc_cv_as_section_exclude_e = no; then
+ case "${target}" in
+ # Solaris as uses #exclude instead.
+ *-*-solaris2*)
+ case "${target}" in
+ sparc*-*-solaris2*)
+ conftest_s='.section "foo1", #exclude'
+ ;;
+ i?86-*-solaris2* | x86_64-*-solaris2*)
+ conftest_s='.section foo1, #exclude'
+ ;;
+ esac
+ ;;
+ esac
+ gcc_GAS_CHECK_FEATURE([section exclude flag], gcc_cv_as_section_exclude_hash,,
+ [$conftest_s
+ .byte 0,0,0,0])
+fi
+AC_DEFINE_UNQUOTED(HAVE_GAS_SECTION_EXCLUDE,
+ [`if test $gcc_cv_as_section_exclude_e = yes || test $gcc_cv_as_section_exclude_hash = yes; then echo 1; else echo 0; fi`],
+[Define if your assembler supports specifying the exclude section flag.])
+
+# Test if the assembler supports the section flag 'R' for specifying
+# section with SHF_GNU_RETAIN.
+case "${target}" in
+ # Solaris may use GNU assembler with Solairs ld. Even if GNU
+ # assembler supports the section flag 'R', it doesn't mean that
+ # Solairs ld supports it.
+ *-*-solaris2*)
+ gcc_cv_as_shf_gnu_retain=no
+ ;;
+ *)
+ gcc_GAS_CHECK_FEATURE([section 'R' flag], gcc_cv_as_shf_gnu_retain,
+ [--fatal-warnings],
+ [.section .foo,"awR",%progbits
+.byte 0])
+ ;;
+esac
+AC_DEFINE_UNQUOTED(HAVE_GAS_SHF_GNU_RETAIN,
+ [`if test $gcc_cv_as_shf_gnu_retain = yes; then echo 1; else echo 0; fi`],
+ [Define 0/1 if your assembler supports marking sections with SHF_GNU_RETAIN flag.])
+
+# Test if the assembler supports the section flag 'o' for specifying
+# section with link-order.
+case "${target}" in
+ # Solaris may use GNU assembler with Solairs ld. Even if GNU
+ # assembler supports the section flag 'o', it doesn't mean that
+ # Solairs ld supports it.
+ *-*-solaris2*)
+ gcc_cv_as_section_link_order=no
+ ;;
+ *)
+ gcc_GAS_CHECK_FEATURE([section 'o' flag], gcc_cv_as_section_link_order,
+ [--fatal-warnings],
+ [.section .foo,"a"
+.byte 0
+.section __patchable_function_entries,"awo",%progbits,.foo
+.byte 0])
+ ;;
+esac
+AC_DEFINE_UNQUOTED(HAVE_GAS_SECTION_LINK_ORDER,
+ [`if test $gcc_cv_as_section_link_order = yes; then echo 1; else echo 0; fi`],
+ [Define 0/1 if your assembler supports 'o' flag in .section directive.])
+
+gcc_GAS_CHECK_FEATURE(section merging support, gcc_cv_as_shf_merge,
+ [--fatal-warnings],
+ [.section .rodata.str, "aMS", @progbits, 1])
+if test $gcc_cv_as_shf_merge = no; then
+ gcc_GAS_CHECK_FEATURE(section merging support, gcc_cv_as_shf_merge,
+ [--fatal-warnings],
+ [.section .rodata.str, "aMS", %progbits, 1])
+fi
+AC_DEFINE_UNQUOTED(HAVE_GAS_SHF_MERGE,
+ [`if test $gcc_cv_as_shf_merge = yes; then echo 1; else echo 0; fi`],
+[Define 0/1 if your assembler supports marking sections with SHF_MERGE flag.])
+
+gcc_cv_ld_aligned_shf_merge=yes
+case "$target" in
+ # SHF_MERGE support is broken in Solaris ld up to Solaris 11.3/SPARC for
+ # alignment > 1.
+ sparc*-*-solaris2.11*)
+ if test x"$gnu_ld" = xno \
+ && test "$ld_vers_major" -lt 2 && test "$ld_vers_minor" -lt 3159; then
+ gcc_cv_ld_aligned_shf_merge=no
+ fi
+ ;;
+esac
+AC_DEFINE_UNQUOTED(HAVE_LD_ALIGNED_SHF_MERGE,
+ [`if test $gcc_cv_ld_aligned_shf_merge = yes; then echo 1; else echo 0; fi`],
+[Define 0/1 if your linker supports the SHF_MERGE flag with section alignment > 1.])
+
+gcc_GAS_CHECK_FEATURE([stabs directive], gcc_cv_as_stabs_directive,,
+[.stabs "gcc2_compiled.",60,0,0,0],,
+[AC_DEFINE(HAVE_AS_STABS_DIRECTIVE, 1,
+ [Define if your assembler supports .stabs.])])
+
+gcc_GAS_CHECK_FEATURE([COMDAT group support (GNU as)],
+ gcc_cv_as_comdat_group,
+ [--fatal-warnings],
+ [.section .text,"axG",@progbits,.foo,comdat])
+if test $gcc_cv_as_comdat_group = yes; then
+ gcc_cv_as_comdat_group_percent=no
+ gcc_cv_as_comdat_group_group=no
+else
+ gcc_GAS_CHECK_FEATURE([COMDAT group support (GNU as, %type)],
+ gcc_cv_as_comdat_group_percent,
+ [--fatal-warnings],
+ [.section .text,"axG",%progbits,.foo,comdat])
+ if test $gcc_cv_as_comdat_group_percent = yes; then
+ gcc_cv_as_comdat_group_group=no
+ else
+ case "${target}" in
+ # Sun as uses a completely different syntax.
+ *-*-solaris2*)
+ case "${target}" in
+ sparc*-*-solaris2*)
+ conftest_s='
+ .group foo,".text%foo",#comdat
+ .section ".text%foo", #alloc,#execinstr,#progbits
+ .globl foo
+ foo:
+ '
+ ;;
+ i?86-*-solaris2* | x86_64-*-solaris2*)
+ conftest_s='
+ .group foo,.text%foo,#comdat
+ .section .text%foo, "ax", @progbits
+ .globl foo
+ foo:
+ '
+ ;;
+ esac
+ gcc_GAS_CHECK_FEATURE([COMDAT group support (Sun as, .group)],
+ gcc_cv_as_comdat_group_group,
+ , [$conftest_s])
+ ;;
+ esac
+ if test -z "${gcc_cv_as_comdat_group_group+set}"; then
+ gcc_cv_as_comdat_group_group=no
+ fi
+ fi
+fi
+if test x"$ld_is_gold" = xyes; then
+ comdat_group=yes
+elif test x"$ld_is_mold" = xyes; then
+ comdat_group=yes
+elif test $in_tree_ld = yes ; then
+ comdat_group=no
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 16 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ comdat_group=yes
+ fi
+elif echo "$ld_ver" | grep GNU > /dev/null; then
+ comdat_group=yes
+ if test 0"$ld_date" -lt 20050308; then
+ if test -n "$ld_date"; then
+ # If there was date string, but was earlier than 2005-03-08, fail
+ comdat_group=no
+ elif test "$ld_vers_major" -lt 2; then
+ comdat_group=no
+ elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 16; then
+ comdat_group=no
+ fi
+ fi
+else
+changequote(,)dnl
+ case "${target}" in
+ *-*-solaris2.1[1-9]*)
+ comdat_group=no
+ # Sun ld has COMDAT group support since Solaris 9, but it doesn't
+ # interoperate with GNU as until Solaris 11 build 130, i.e. ld
+ # version 1.688.
+ #
+ # If using Sun as for COMDAT group as emitted by GCC, one needs at
+ # least ld version 1.2267.
+ if test "$ld_vers_major" -gt 1; then
+ comdat_group=yes
+ elif test "x$gas_flag" = xyes && test "$ld_vers_minor" -ge 1688; then
+ comdat_group=yes
+ elif test "$ld_vers_minor" -ge 2267; then
+ comdat_group=yes
+ fi
+ ;;
+ *)
+ # Assume linkers other than GNU ld don't support COMDAT group.
+ comdat_group=no
+ ;;
+ esac
+changequote([,])dnl
+fi
+# Allow overriding the automatic COMDAT group tests above.
+AC_ARG_ENABLE(comdat,
+ [AS_HELP_STRING([--enable-comdat], [enable COMDAT group support])],
+ [comdat_group="$enable_comdat"])
+if test $comdat_group = no; then
+ gcc_cv_as_comdat_group=no
+ gcc_cv_as_comdat_group_percent=no
+ gcc_cv_as_comdat_group_group=no
+fi
+AC_DEFINE_UNQUOTED(HAVE_COMDAT_GROUP,
+ [`if test $gcc_cv_as_comdat_group = yes \
+ || test $gcc_cv_as_comdat_group_percent = yes \
+ || test $gcc_cv_as_comdat_group_group = yes; then echo 1; else echo 0; fi`],
+[Define 0/1 if your assembler and linker support COMDAT groups.])
+
+# Restrict this test to Solaris/x86: other targets define this statically.
+case "${target}" in
+ i?86-*-solaris2* | x86_64-*-solaris2*)
+ AC_MSG_CHECKING(support for hidden thunks in linkonce sections)
+ if test $in_tree_ld = yes || echo "$ld_ver" | grep GNU > /dev/null; then
+ hidden_linkonce=yes
+ else
+ case "${target}" in
+ # Full support for hidden thunks in linkonce sections only appeared in
+ # Solaris 11/OpenSolaris.
+ *-*-solaris2.1[[1-9]]*)
+ hidden_linkonce=yes
+ ;;
+ *)
+ hidden_linkonce=no
+ ;;
+ esac
+ fi
+ AC_MSG_RESULT($hidden_linkonce)
+ AC_DEFINE_UNQUOTED(USE_HIDDEN_LINKONCE,
+ [`if test $hidden_linkonce = yes; then echo 1; else echo 0; fi`],
+ [Define 0/1 if your linker supports hidden thunks in linkonce sections.])
+ ;;
+esac
+
+gcc_GAS_CHECK_FEATURE([line table is_stmt support],
+ gcc_cv_as_is_stmt,,
+[ .text
+ .file 1 "conf.c"
+ .loc 1 1 0 is_stmt 1],,
+[AC_DEFINE(HAVE_GAS_LOC_STMT, 1,
+ [Define if your assembler supports the .loc is_stmt sub-directive.])])
+
+gcc_GAS_CHECK_FEATURE([line table discriminator support],
+ gcc_cv_as_discriminator,,
+[ .text
+ .file 1 "conf.c"
+ .loc 1 1 0 discriminator 1],,
+[AC_DEFINE(HAVE_GAS_DISCRIMINATOR, 1,
+ [Define if your assembler supports the .loc discriminator sub-directive.])])
+
+# Catch the newlib flag of the same name so we can gate GCC features on it.
+AC_ARG_ENABLE(newlib-nano-formatted-io,
+[AS_HELP_STRING([--enable-newlib-nano-formatted-io], [Use nano version
+ formatted IO])],
+[case "${enableval}" in
+ yes|no)
+ ;;
+ *)
+ AC_MSG_ERROR([unknown newlib-nano-formatted-io setting $enableval])
+ ;;
+esac], [])
+
+# Thread-local storage - the check is heavily parameterized.
+conftest_s=
+tls_as_opt=
+case "$target" in
+changequote(,)dnl
+ alpha*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ ldq $27,__tls_get_addr($29) !literal!1
+ lda $16,foo($29) !tlsgd!1
+ jsr $26,($27),__tls_get_addr !lituse_tlsgd!1
+ ldq $27,__tls_get_addr($29) !literal!2
+ lda $16,foo($29) !tlsldm!2
+ jsr $26,($27),__tls_get_addr !lituse_tlsldm!2
+ ldq $1,foo($29) !gotdtprel
+ ldah $2,foo($29) !dtprelhi
+ lda $3,foo($2) !dtprello
+ lda $4,foo($29) !dtprel
+ ldq $1,foo($29) !gottprel
+ ldah $2,foo($29) !tprelhi
+ lda $3,foo($2) !tprello
+ lda $4,foo($29) !tprel'
+ tls_as_opt=--fatal-warnings
+ ;;
+ arc*-*-*)
+ conftest_s='
+ add_s r0,r0, @foo@tpoff'
+ ;;
+ cris-*-*|crisv32-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+x: .long 25
+ .text
+ move.d x:IE,$r10
+ nop'
+ tls_as_opt=--fatal-warnings
+ ;;
+ frv*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+x: .long 25
+ .text
+ call #gettlsoff(x)'
+ ;;
+ hppa*-*-linux*)
+ conftest_s='
+t1: .reg %r20
+t2: .reg %r21
+gp: .reg %r19
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ .align 4
+ addil LT%foo-$tls_gdidx$,gp
+ ldo RT%foo-$tls_gdidx$(%r1),%arg0
+ b __tls_get_addr
+ nop
+ addil LT%foo-$tls_ldidx$,gp
+ b __tls_get_addr
+ ldo RT%foo-$tls_ldidx$(%r1),%arg0
+ addil LR%foo-$tls_dtpoff$,%ret0
+ ldo RR%foo-$tls_dtpoff$(%r1),%t1
+ mfctl %cr27,%t1
+ addil LT%foo-$tls_ieoff$,gp
+ ldw RT%foo-$tls_ieoff$(%r1),%t2
+ add %t1,%t2,%t3
+ mfctl %cr27,%t1
+ addil LR%foo-$tls_leoff$,%t1
+ ldo RR%foo-$tls_leoff$(%r1),%t2'
+ tls_as_opt=--fatal-warnings
+ ;;
+ arm*-*-*)
+ conftest_s='
+ .section ".tdata","awT",%progbits
+foo: .long 25
+ .text
+.word foo(gottpoff)
+.word foo(tpoff)
+.word foo(tlsgd)
+.word foo(tlsldm)
+.word foo(tlsldo)'
+ ;;
+ i[34567]86-*-* | x86_64-*-*)
+ case "$target" in
+ i[34567]86-*-solaris2.* | x86_64-*-solaris2.*)
+ on_solaris=yes
+ ;;
+ *)
+ on_solaris=no
+ ;;
+ esac
+ if test x$on_solaris = xyes && test x$gas_flag = xno; then
+ conftest_s='
+ .section .tdata,"awt",@progbits'
+ tls_section_flag=t
+changequote([,])dnl
+ AC_DEFINE(TLS_SECTION_ASM_FLAG, 't',
+[Define to the flag used to mark TLS sections if the default (`T') doesn't work.])
+changequote(,)dnl
+ else
+ conftest_s='
+ .section ".tdata","awT",@progbits'
+ tls_section_flag=T
+ tls_as_opt="--fatal-warnings"
+ fi
+ case "$target" in
+ i[34567]86-*-*)
+ if test x$on_solaris = xyes; then
+ case $gas_flag in
+ yes) tls_as_opt="$tls_as_opt --32" ;;
+ esac
+ fi
+ conftest_s="$conftest_s
+foo: .long 25
+ .text
+ movl %gs:0, %eax
+ leal foo@tlsgd(,%ebx,1), %eax
+ leal foo@tlsldm(%ebx), %eax
+ leal foo@dtpoff(%eax), %edx
+ movl foo@gottpoff(%ebx), %eax
+ subl foo@gottpoff(%ebx), %eax
+ addl foo@gotntpoff(%ebx), %eax
+ movl foo@indntpoff, %eax
+ movl \$foo@tpoff, %eax
+ subl \$foo@tpoff, %eax
+ leal foo@ntpoff(%ecx), %eax"
+ ;;
+ x86_64-*-*)
+ if test x$on_solaris = xyes; then
+ case $gas_flag in
+ yes) tls_as_opt="$tls_as_opt --64" ;;
+ no) tls_as_opt="$tls_as_opt -xarch=amd64" ;;
+ esac
+ fi
+ conftest_s="$conftest_s
+foo: .long 25
+ .text
+ movq %fs:0, %rax
+ leaq foo@tlsgd(%rip), %rdi
+ leaq foo@tlsld(%rip), %rdi
+ leaq foo@dtpoff(%rax), %rdx
+ movq foo@gottpoff(%rip), %rax
+ movq \$foo@tpoff, %rax"
+ ;;
+ esac
+ ;;
+ ia64-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: data8 25
+ .text
+ addl r16 = @ltoff(@dtpmod(foo#)), gp
+ addl r17 = @ltoff(@dtprel(foo#)), gp
+ addl r18 = @ltoff(@tprel(foo#)), gp
+ addl r19 = @dtprel(foo#), gp
+ adds r21 = @dtprel(foo#), r13
+ movl r23 = @dtprel(foo#)
+ addl r20 = @tprel(foo#), gp
+ adds r22 = @tprel(foo#), r13
+ movl r24 = @tprel(foo#)'
+ tls_as_opt=--fatal-warnings
+ ;;
+ loongarch*-*-*)
+ conftest_s='
+ .section .tdata,"awT",@progbits
+x: .word 2
+ .text
+ la.tls.gd $a0,x
+ bl __tls_get_addr'
+ tls_first_major=0
+ tls_first_minor=0
+ tls_as_opt='--fatal-warnings'
+ ;;
+ microblaze*-*-*)
+ conftest_s='
+ .section .tdata,"awT",@progbits
+x:
+ .word 2
+ .text
+ addik r5,r20,x@TLSGD
+ addik r5,r20,x@TLSLDM'
+ tls_as_opt='--fatal-warnings'
+ ;;
+ mips*-*-*)
+ conftest_s='
+ .section .tdata,"awT",@progbits
+x:
+ .word 2
+ .text
+ addiu $4, $28, %tlsgd(x)
+ addiu $4, $28, %tlsldm(x)
+ lui $4, %dtprel_hi(x)
+ addiu $4, $4, %dtprel_lo(x)
+ lw $4, %gottprel(x)($28)
+ lui $4, %tprel_hi(x)
+ addiu $4, $4, %tprel_lo(x)'
+ tls_as_opt='-32 --fatal-warnings'
+ ;;
+ m68k-*-*)
+ conftest_s='
+ .section .tdata,"awT",@progbits
+x:
+ .word 2
+ .text
+foo:
+ move.l x@TLSGD(%a5),%a0
+ move.l x@TLSLDM(%a5),%a0
+ move.l x@TLSLDO(%a5),%a0
+ move.l x@TLSIE(%a5),%a0
+ move.l x@TLSLE(%a5),%a0'
+ tls_as_opt='--fatal-warnings'
+ ;;
+ nios2-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits'
+ tls_as_opt="--fatal-warnings"
+ ;;
+ aarch64*-*-*)
+ conftest_s='
+ .section ".tdata","awT",%progbits
+foo: .long 25
+ .text
+ adrp x0, :tlsgd:x
+ add x0, x0, #:tlsgd_lo12:x
+ bl __tls_get_addr
+ nop'
+ tls_as_opt='--fatal-warnings'
+ ;;
+ or1k*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ l.movhi r3, tpoffha(foo)
+ l.add r3, r3, r10
+ l.lwz r4, tpofflo(foo)(r3)'
+ tls_as_opt=--fatal-warnings
+ ;;
+ powerpc-ibm-aix*)
+ conftest_s='
+ .extern __get_tpointer
+ .toc
+LC..1:
+ .tc a[TC],a[TL]@le
+ .csect .text[PR]
+.tlstest:
+ lwz 9,LC..1(2)
+ bla __get_tpointer
+ lwzx 3,9,3
+ .globl a
+ .csect a[TL],4
+a:
+ .space 4'
+ ;;
+ powerpc64*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+ .align 3
+ld0: .space 8
+ld1: .space 8
+x1: .space 8
+x2: .space 8
+x3: .space 8
+ .text
+ addi 3,2,ld0@got@tlsgd
+ bl .__tls_get_addr
+ nop
+ addi 3,2,ld1@toc
+ bl .__tls_get_addr
+ nop
+ addi 3,2,x1@got@tlsld
+ bl .__tls_get_addr
+ nop
+ addi 9,3,x1@dtprel
+ bl .__tls_get_addr
+ nop
+ addis 9,3,x2@dtprel@ha
+ addi 9,9,x2@dtprel@l
+ bl .__tls_get_addr
+ nop
+ ld 9,x3@got@dtprel(2)
+ add 9,9,3
+ bl .__tls_get_addr
+ nop'
+ tls_as_opt="-a64 --fatal-warnings"
+ ;;
+ powerpc*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+ .align 2
+ld0: .space 4
+ld1: .space 4
+x1: .space 4
+x2: .space 4
+x3: .space 4
+ .text
+ addi 3,31,ld0@got@tlsgd
+ bl __tls_get_addr
+ addi 3,31,x1@got@tlsld
+ bl __tls_get_addr
+ addi 9,3,x1@dtprel
+ addis 9,3,x2@dtprel@ha
+ addi 9,9,x2@dtprel@l
+ lwz 9,x3@got@tprel(31)
+ add 9,9,x@tls
+ addi 9,2,x1@tprel
+ addis 9,2,x2@tprel@ha
+ addi 9,9,x2@tprel@l'
+ tls_as_opt="-a32 --fatal-warnings"
+ ;;
+ riscv*-*-*)
+ conftest_s='
+ .section .tdata,"awT",@progbits
+x: .word 2
+ .text
+ la.tls.gd a0,x
+ call __tls_get_addr'
+ tls_as_opt='--fatal-warnings'
+ ;;
+ s390-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ .long foo@TLSGD
+ .long foo@TLSLDM
+ .long foo@DTPOFF
+ .long foo@NTPOFF
+ .long foo@GOTNTPOFF
+ .long foo@INDNTPOFF
+ l %r1,foo@GOTNTPOFF(%r12)
+ l %r1,0(%r1):tls_load:foo
+ bas %r14,0(%r1,%r13):tls_gdcall:foo
+ bas %r14,0(%r1,%r13):tls_ldcall:foo'
+ tls_as_opt="-m31 --fatal-warnings"
+ ;;
+ s390x-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ .quad foo@TLSGD
+ .quad foo@TLSLDM
+ .quad foo@DTPOFF
+ .quad foo@NTPOFF
+ .quad foo@GOTNTPOFF
+ lg %r1,foo@GOTNTPOFF(%r12)
+ larl %r1,foo@INDNTPOFF
+ brasl %r14,__tls_get_offset@PLT:tls_gdcall:foo
+ brasl %r14,__tls_get_offset@PLT:tls_ldcall:foo'
+ tls_as_opt="-m64 -Aesame --fatal-warnings"
+ ;;
+ sh-*-* | sh[123456789lbe]*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ .long foo@TLSGD
+ .long foo@TLSLDM
+ .long foo@DTPOFF
+ .long foo@GOTTPOFF
+ .long foo@TPOFF'
+ tls_as_opt=--fatal-warnings
+ ;;
+ sparc*-*-*)
+ case "$target" in
+ sparc*-sun-solaris2.*)
+ on_solaris=yes
+ ;;
+ *)
+ on_solaris=no
+ ;;
+ esac
+ if test x$on_solaris = xyes && test x$gas_flag = xno; then
+ conftest_s='
+ .section ".tdata",#alloc,#write,#tls'
+ else
+ conftest_s='
+ .section ".tdata","awT",@progbits'
+ tls_as_opt="-32 --fatal-warnings"
+ fi
+ conftest_s="$conftest_s
+foo: .long 25
+ .text
+ sethi %tgd_hi22(foo), %o0
+ add %o0, %tgd_lo10(foo), %o1
+ add %l7, %o1, %o0, %tgd_add(foo)
+ call __tls_get_addr, %tgd_call(foo)
+ sethi %tldm_hi22(foo), %l1
+ add %l1, %tldm_lo10(foo), %l2
+ add %l7, %l2, %o0, %tldm_add(foo)
+ call __tls_get_addr, %tldm_call(foo)
+ sethi %tldo_hix22(foo), %l3
+ xor %l3, %tldo_lox10(foo), %l4
+ add %o0, %l4, %l5, %tldo_add(foo)
+ sethi %tie_hi22(foo), %o3
+ add %o3, %tie_lo10(foo), %o3
+ ld [%l7 + %o3], %o2, %tie_ld(foo)
+ add %g7, %o2, %o4, %tie_add(foo)
+ sethi %tle_hix22(foo), %l1
+ xor %l1, %tle_lox10(foo), %o5
+ ld [%g7 + %o5], %o1"
+ ;;
+ tilepro*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ addli r0, zero, tls_gd(foo)
+ auli r0, zero, tls_gd_ha16(foo)
+ addli r0, r0, tls_gd_lo16(foo)
+ jal __tls_get_addr
+ addli r0, zero, tls_ie(foo)
+ auli r0, r0, tls_ie_ha16(foo)
+ addli r0, r0, tls_ie_lo16(foo)'
+ tls_as_opt="--fatal-warnings"
+ ;;
+ tilegx*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ shl16insli r0, zero, hw0_last_tls_gd(foo)
+ shl16insli r0, zero, hw1_last_tls_gd(foo)
+ shl16insli r0, r0, hw0_tls_gd(foo)
+ jal __tls_get_addr
+ shl16insli r0, zero, hw1_last_tls_ie(foo)
+ shl16insli r0, r0, hw0_tls_ie(foo)'
+ tls_as_opt="--fatal-warnings"
+ ;;
+ xtensa*-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ movi a8, foo@TLSFUNC
+ movi a10, foo@TLSARG
+ callx8.tls a8, foo@TLSCALL'
+ ;;
+changequote([,])dnl
+esac
+set_have_as_tls=no
+if test "x$enable_tls" = xno ; then
+ : # TLS explicitly disabled.
+elif test "x$enable_tls" = xyes ; then
+ set_have_as_tls=yes # TLS explicitly enabled.
+elif test -z "$conftest_s"; then
+ : # If we don't have a check, assume no support.
+else
+ gcc_GAS_CHECK_FEATURE(thread-local storage support, gcc_cv_as_tls,
+ [$tls_as_opt], [$conftest_s],,
+ [set_have_as_tls=yes])
+fi
+if test $set_have_as_tls = yes ; then
+ AC_DEFINE(HAVE_AS_TLS, 1,
+ [Define if your assembler and linker support thread-local storage.])
+fi
+
+# Target-specific assembler checks.
+
+AC_MSG_CHECKING(linker -Bstatic/-Bdynamic option)
+gcc_cv_ld_static_dynamic=no
+gcc_cv_ld_static_option='-Bstatic'
+gcc_cv_ld_dynamic_option='-Bdynamic'
+if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 10 -o "$gcc_cv_gld_major_version" -gt 2; then
+ gcc_cv_ld_static_dynamic=yes
+ fi
+elif test x$gcc_cv_ld != x; then
+ # Check if linker supports -Bstatic/-Bdynamic option
+ if $gcc_cv_ld --help 2>&1 | grep -- -Bstatic > /dev/null \
+ && $gcc_cv_ld --help 2>&1 | grep -- -Bdynamic > /dev/null; then
+ gcc_cv_ld_static_dynamic=yes
+ else
+ case "$target" in
+ # AIX ld uses -b flags
+ *-*-aix4.[[23]]* | *-*-aix[[5-9]]*)
+ gcc_cv_ld_static_dynamic=yes
+ gcc_cv_ld_static_option="-bstatic"
+ gcc_cv_ld_dynamic_option="-bdynamic"
+ ;;
+ # HP-UX ld uses -a flags to select between shared and archive.
+ *-*-hpux*)
+ if test x"$gnu_ld" = xno; then
+ gcc_cv_ld_static_dynamic=yes
+ gcc_cv_ld_static_option="-aarchive_shared"
+ gcc_cv_ld_dynamic_option="-adefault"
+ fi
+ ;;
+ # Solaris 2 ld always supports -Bstatic/-Bdynamic.
+ *-*-solaris2*)
+ gcc_cv_ld_static_dynamic=yes
+ ;;
+ esac
+ fi
+fi
+if test x"$gcc_cv_ld_static_dynamic" = xyes; then
+ AC_DEFINE(HAVE_LD_STATIC_DYNAMIC, 1,
+[Define if your linker supports -Bstatic/-Bdynamic or equivalent options.])
+ AC_DEFINE_UNQUOTED(LD_STATIC_OPTION, "$gcc_cv_ld_static_option",
+[Define to the linker option to disable use of shared objects.])
+ AC_DEFINE_UNQUOTED(LD_DYNAMIC_OPTION, "$gcc_cv_ld_dynamic_option",
+[Define to the linker option to enable use of shared objects.])
+fi
+AC_MSG_RESULT($gcc_cv_ld_static_dynamic)
+
+AC_MSG_CHECKING(linker --version-script option)
+gcc_cv_ld_version_script=no
+ld_version_script_option=''
+if test $in_tree_ld = yes || test x"$gnu_ld" = xyes; then
+ gcc_cv_ld_version_script=yes
+ ld_version_script_option='--version-script'
+elif test x$gcc_cv_ld != x; then
+ case "$target" in
+ # Solaris 2 ld always supports -M. It also supports a subset of
+ # --version-script since Solaris 11.4, but requires
+ # -z gnu-version-script-compat to activate.
+ *-*-solaris2*)
+ gcc_cv_ld_version_script=yes
+ ld_version_script_option='-M'
+ ;;
+ esac
+fi
+# Don't AC_DEFINE result, only used in jit/Make-lang.in so far.
+AC_MSG_RESULT($gcc_cv_ld_version_script)
+AC_SUBST(ld_version_script_option)
+
+AC_MSG_CHECKING(linker soname option)
+gcc_cv_ld_soname=no
+if test $in_tree_ld = yes || test x"$gnu_ld" = xyes; then
+ gcc_cv_ld_soname=yes
+ ld_soname_option='-soname'
+elif test x$gcc_cv_ld != x; then
+ case "$target" in
+ *-*-darwin*)
+ gcc_cv_ld_soname=yes
+ ld_soname_option='-install_name'
+ ;;
+ # Solaris 2 ld always supports -h. It also supports --soname for GNU
+ # ld compatiblity since some Solaris 10 update.
+ *-*-solaris2*)
+ gcc_cv_ld_soname=yes
+ ld_soname_option='-h'
+ ;;
+ esac
+fi
+# Don't AC_DEFINE result, only used in jit/Make-lang.in so far.
+AC_MSG_RESULT($gcc_cv_ld_soname)
+AC_SUBST(ld_soname_option)
+
+if test x"$demangler_in_ld" = xyes; then
+ AC_MSG_CHECKING(linker --demangle support)
+ gcc_cv_ld_demangle=no
+ if test $in_tree_ld = yes; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 14 -o "$gcc_cv_gld_major_version" -gt 2; then \
+ gcc_cv_ld_demangle=yes
+ fi
+ elif test x$gcc_cv_ld != x -a x"$gnu_ld" = xyes; then
+ # Check if the GNU linker supports --demangle option
+ if $gcc_cv_ld --help 2>&1 | grep no-demangle > /dev/null; then
+ gcc_cv_ld_demangle=yes
+ fi
+ fi
+ if test x"$gcc_cv_ld_demangle" = xyes; then
+ AC_DEFINE(HAVE_LD_DEMANGLE, 1,
+[Define if your linker supports --demangle option.])
+ fi
+ AC_MSG_RESULT($gcc_cv_ld_demangle)
+fi
+
+AC_MSG_CHECKING(linker plugin support)
+gcc_cv_lto_plugin=0
+if test -f liblto_plugin.la; then
+ save_ld_ver="$ld_ver"
+ save_ld_vers_major="$ld_vers_major"
+ save_ld_vers_minor="$ld_vers_minor"
+ save_ld_is_gold="$ld_is_gold"
+
+ ld_is_gold=no
+
+ if test $in_tree_ld = yes -a x"$ORIGINAL_PLUGIN_LD_FOR_TARGET" = x"$gcc_cv_ld"; then
+ ld_ver="GNU ld"
+ # FIXME: ld_is_gold?
+ ld_vers_major="$gcc_cv_gld_major_version"
+ ld_vers_minor="$gcc_cv_gld_minor_version"
+ else
+ # Determine plugin linker version.
+ # FIXME: Partial duplicate from above, generalize.
+changequote(,)dnl
+ ld_ver=`$ORIGINAL_PLUGIN_LD_FOR_TARGET --version 2>/dev/null | sed 1q`
+ if echo "$ld_ver" | grep GNU > /dev/null; then
+ if echo "$ld_ver" | grep "GNU gold" > /dev/null; then
+ ld_is_gold=yes
+ ld_vers=`echo $ld_ver | sed -n \
+ -e 's,^[^)]*[ ]\([0-9][0-9]*\.[0-9][0-9]*[^)]*\)) .*$,\1,p'`
+ else
+ ld_vers=`echo $ld_ver | sed -n \
+ -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*.*\)$,\1,p'`
+ fi
+ ld_vers_major=`expr "$ld_vers" : '\([0-9]*\)'`
+ ld_vers_minor=`expr "$ld_vers" : '[0-9]*\.\([0-9]*\)'`
+ fi
+changequote([,])dnl
+ fi
+
+ # Determine plugin support.
+ if echo "$ld_ver" | grep GNU > /dev/null; then
+ # Require GNU ld or gold 2.21+ for plugin support by default.
+ if test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -ge 21; then
+ gcc_cv_lto_plugin=2
+ elif test "$ld_is_mold" = yes; then
+ gcc_cv_lto_plugin=2
+ # Allow -fuse-linker-plugin to enable plugin support in GNU gold 2.20.
+ elif test "$ld_is_gold" = yes -a "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -eq 20; then
+ gcc_cv_lto_plugin=1
+ fi
+ fi
+
+ ld_ver="$save_ld_ver"
+ ld_vers_major="$save_ld_vers_major"
+ ld_vers_minor="$save_ld_vers_minor"
+ ld_is_gold="$save_ld_is_gold"
+fi
+AC_DEFINE_UNQUOTED(HAVE_LTO_PLUGIN, $gcc_cv_lto_plugin,
+ [Define to the level of your linker's plugin support.])
+AC_MSG_RESULT($gcc_cv_lto_plugin)
+
+# Target OS-specific assembler checks.
+
+case "$target_os" in
+ darwin*)
+ gcc_GAS_CHECK_FEATURE([-mmacosx-version-min option],
+ gcc_cv_as_mmacosx_version_min,
+ [-mmacosx-version-min=10.1], [.text],,
+ [AC_DEFINE(HAVE_AS_MMACOSX_VERSION_MIN_OPTION, 1,
+ [Define if your Mac OS X assembler supports the -mmacos-version-min option.])])
+ ;;
+esac
+
+# Target CPU-specific assembler checks.
+
+case "$target" in
+ aarch64*-*-*)
+ gcc_GAS_CHECK_FEATURE([-mabi option], gcc_cv_as_aarch64_mabi,
+ [-mabi=lp64], [.text],,,)
+ if test x$gcc_cv_as_aarch64_mabi = xyes; then
+ AC_DEFINE(HAVE_AS_MABI_OPTION, 1,
+ [Define if your assembler supports the -mabi option.])
+ else
+ if test x$with_abi = xilp32; then
+ AC_MSG_ERROR([Assembler does not support -mabi=ilp32.\
+ Upgrade the Assembler.])
+ fi
+ if test x"$with_multilib_list" = xdefault; then
+ TM_MULTILIB_CONFIG=lp64
+ else
+ aarch64_multilibs=`echo $with_multilib_list | sed -e 's/,/ /g'`
+ for aarch64_multilib in ${aarch64_multilibs}; do
+ case ${aarch64_multilib} in
+ ilp32)
+ AC_MSG_ERROR([Assembler does not support -mabi=ilp32.\
+ Upgrade the Assembler.])
+ ;;
+ *)
+ ;;
+ esac
+ done
+ fi
+ fi
+ # Check if we have binutils support for relocations types needed by -fpic
+ gcc_GAS_CHECK_FEATURE([-fpic relocs], gcc_cv_as_aarch64_picreloc,,
+ [
+ .text
+ ldr x0, [[x2, #:gotpage_lo15:globalsym]]
+ ],,[AC_DEFINE(HAVE_AS_SMALL_PIC_RELOCS, 1,
+ [Define if your assembler supports relocs needed by -fpic.])])
+ # Enable Branch Target Identification Mechanism and Return Address
+ # Signing by default.
+ AC_ARG_ENABLE(standard-branch-protection,
+ [
+AS_HELP_STRING([--enable-standard-branch-protection],
+ [enable Branch Target Identification Mechanism and Return Address Signing by default for AArch64])
+AS_HELP_STRING([--disable-standard-branch-protection],
+ [disable Branch Target Identification Mechanism and Return Address Signing by default for AArch64])
+ ],
+ [
+ case $enableval in
+ yes)
+ tm_defines="${tm_defines} TARGET_ENABLE_BTI=1 TARGET_ENABLE_PAC_RET=1"
+ ;;
+ no)
+ ;;
+ *)
+ AC_MSG_ERROR(['$enableval' is an invalid value for --enable-standard-branch-protection.\
+ Valid choices are 'yes' and 'no'.])
+ ;;
+ esac
+ ],
+ [])
+ # Enable default workaround for AArch64 Cortex-A53 erratum 835769.
+ AC_ARG_ENABLE(fix-cortex-a53-835769,
+ [
+AS_HELP_STRING([--enable-fix-cortex-a53-835769],
+ [enable workaround for AArch64 Cortex-A53 erratum 835769 by default])
+AS_HELP_STRING([--disable-fix-cortex-a53-835769],
+ [disable workaround for AArch64 Cortex-A53 erratum 835769 by default])
+ ],
+ [
+ case $enableval in
+ yes)
+ tm_defines="${tm_defines} TARGET_FIX_ERR_A53_835769_DEFAULT=1"
+ ;;
+ no)
+ ;;
+ *)
+ AC_MSG_ERROR(['$enableval' is an invalid value for --enable-fix-cortex-a53-835769.\
+ Valid choices are 'yes' and 'no'.])
+ ;;
+
+ esac
+ ],
+ [])
+ # Enable default workaround for AArch64 Cortex-A53 erratum 843419.
+ AC_ARG_ENABLE(fix-cortex-a53-843419,
+ [
+AS_HELP_STRING([--enable-fix-cortex-a53-843419],
+ [enable workaround for AArch64 Cortex-A53 erratum 843419 by default])
+AS_HELP_STRING([--disable-fix-cortex-a53-843419],
+ [disable workaround for AArch64 Cortex-A53 erratum 843419 by default])
+ ],
+ [
+ case $enableval in
+ yes)
+ tm_defines="${tm_defines} TARGET_FIX_ERR_A53_843419_DEFAULT=1"
+ ;;
+ no)
+ ;;
+ *)
+ AC_MSG_ERROR(['$enableval' is an invalid value for --enable-fix-cortex-a53-843419.\
+ Valid choices are 'yes' and 'no'.])
+ ;;
+
+ esac
+ ],
+ [])
+ ;;
+
+ # All TARGET_ABI_OSF targets.
+ alpha*-*-linux* | alpha*-*-*bsd*)
+ gcc_GAS_CHECK_FEATURE([explicit relocation support],
+ gcc_cv_as_alpha_explicit_relocs,,
+[ .set nomacro
+ .text
+ extbl $3, $2, $3 !lituse_bytoff!1
+ ldq $2, a($29) !literal!1
+ ldq $4, b($29) !literal!2
+ ldq_u $3, 0($2) !lituse_base!1
+ ldq $27, f($29) !literal!5
+ jsr $26, ($27), f !lituse_jsr!5
+ ldah $29, 0($26) !gpdisp!3
+ lda $0, c($29) !gprel
+ ldah $1, d($29) !gprelhigh
+ lda $1, d($1) !gprellow
+ lda $29, 0($29) !gpdisp!3],,
+ [AC_DEFINE(HAVE_AS_EXPLICIT_RELOCS, 1,
+ [Define if your assembler supports explicit relocations.])])
+ gcc_GAS_CHECK_FEATURE([jsrdirect relocation support],
+ gcc_cv_as_alpha_jsrdirect_relocs,,
+[ .set nomacro
+ .text
+ ldq $27, a($29) !literal!1
+ jsr $26, ($27), a !lituse_jsrdirect!1],,
+ [AC_DEFINE(HAVE_AS_JSRDIRECT_RELOCS, 1,
+ [Define if your assembler supports the lituse_jsrdirect relocation.])])
+ ;;
+
+ avr-*-*)
+ gcc_GAS_CHECK_FEATURE([--mlink-relax option], gcc_cv_as_avr_mlink_relax,
+ [--mlink-relax], [.text],,
+ [AC_DEFINE(HAVE_AS_AVR_MLINK_RELAX_OPTION, 1,
+ [Define if your avr assembler supports --mlink-relax option.])])
+
+ gcc_GAS_CHECK_FEATURE([-mrmw option], gcc_cv_as_avr_mrmw,
+ [-mrmw], [.text],,
+ [AC_DEFINE(HAVE_AS_AVR_MRMW_OPTION, 1,
+ [Define if your avr assembler supports -mrmw option.])])
+
+ gcc_GAS_CHECK_FEATURE([__gcc_isr pseudo instruction],
+ gcc_cv_as_avr_mgccisr,
+ [-mgcc-isr], [.text
+ __gcc_isr 1
+ __gcc_isr 2
+ __gcc_isr 0,r24
+ ],,
+ [AC_DEFINE(HAVE_AS_AVR_MGCCISR_OPTION, 1,
+ [Define if your avr assembler supports -mgcc-isr option.])])
+
+ # Check how default linker description file implements .rodata for
+ # avrxmega3 (PR21472). avr-gcc assumes .rodata is *not* loaded to
+ # RAM so avr-gcc skips __do_copy_data for .rodata objects.
+ AC_MSG_CHECKING(binutils for avrxmega3 .rodata support)
+ cat > conftest.s <<EOF
+ .section .rodata,"a",@progbits
+ .global xxvaryy
+ ;; avr-nm should print "... R xxvaryy", not "... D xxvaryy".
+ xxvaryy:
+ .word 1
+EOF
+ rm -f conftest.nm
+ AC_TRY_COMMAND([$gcc_cv_as -mmcu=avrxmega3 conftest.s -o conftest.o])
+ AC_TRY_COMMAND([$gcc_cv_ld -mavrxmega3 conftest.o -o conftest.elf])
+ AC_TRY_COMMAND([$gcc_cv_nm conftest.elf > conftest.nm])
+ if test -s conftest.nm
+ then
+ if grep ' R xxvaryy' conftest.nm > /dev/null; then
+ AC_MSG_RESULT(yes)
+ AC_DEFINE(HAVE_LD_AVR_AVRXMEGA3_RODATA_IN_FLASH, 1,
+ [Define if your default avr linker script for avrxmega3 leaves .rodata in flash.])
+ else
+ AC_MSG_RESULT(no: avrxmega3 .rodata located in RAM)
+ echo "$as_me: nm output was" >&AS_MESSAGE_LOG_FD
+ cat conftest.nm >&AS_MESSAGE_LOG_FD
+ avr_ld_ver="`$gcc_cv_ld -v | sed -e 's:^.* ::'`"
+ AC_MSG_WARN([[support for avrxmega3 .rodata in flash needs Binutils 2.29 or higher (have $avr_ld_ver)]])
+ fi
+ else
+ AC_MSG_RESULT(test failed)
+ echo "$as_me: failed program was" >&AS_MESSAGE_LOG_FD
+ cat conftest.s >&AS_MESSAGE_LOG_FD
+ AC_MSG_WARN([[see `config.log' for details]])
+ fi
+ rm -f conftest.s conftest.o conftest.elf conftest.nm
+ ;;
+
+ cris-*-*)
+ gcc_GAS_CHECK_FEATURE([-no-mul-bug-abort option],
+ gcc_cv_as_cris_no_mul_bug,
+ [-no-mul-bug-abort], [.text],,
+ [AC_DEFINE(HAVE_AS_NO_MUL_BUG_ABORT_OPTION, 1,
+ [Define if your assembler supports the -no-mul-bug-abort option.])])
+ ;;
+
+ sparc*-*-*)
+ gcc_GAS_CHECK_FEATURE([-relax option], gcc_cv_as_sparc_relax,
+ [-relax], [.text],,
+ [AC_DEFINE(HAVE_AS_RELAX_OPTION, 1,
+ [Define if your assembler supports -relax option.])])
+
+ gcc_GAS_CHECK_FEATURE([GOTDATA_OP relocs],
+ gcc_cv_as_sparc_gotdata_op,
+ [-K PIC],
+[.text
+.align 4
+foo:
+ nop
+bar:
+ sethi %gdop_hix22(foo), %g1
+ xor %g1, %gdop_lox10(foo), %g1
+ ld [[%l7 + %g1]], %g2, %gdop(foo)],
+ [if test x$gcc_cv_ld != x \
+ && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1; then
+ if test x$gcc_cv_objdump != x; then
+ if $gcc_cv_objdump -s -j .text conftest 2> /dev/null \
+ | grep ' 03000004 82186004 c405c001'> /dev/null 2>&1; then
+ gcc_cv_as_sparc_gotdata_op=no
+ else
+ gcc_cv_as_sparc_gotdata_op=yes
+ fi
+ fi
+ fi
+ rm -f conftest],
+ [AC_DEFINE(HAVE_AS_SPARC_GOTDATA_OP, 1,
+ [Define if your assembler and linker support GOTDATA_OP relocs.])])
+
+ gcc_GAS_CHECK_FEATURE([unaligned pcrel relocs],
+ gcc_cv_as_sparc_ua_pcrel,
+ [-K PIC],
+[.text
+foo:
+ nop
+.data
+.align 4
+.byte 0
+.uaword %r_disp32(foo)],
+ [if test x$gcc_cv_ld != x \
+ && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1; then
+ gcc_cv_as_sparc_ua_pcrel=yes
+ fi
+ rm -f conftest],
+ [AC_DEFINE(HAVE_AS_SPARC_UA_PCREL, 1,
+ [Define if your assembler and linker support unaligned PC relative relocs.])
+
+ gcc_GAS_CHECK_FEATURE([unaligned pcrel relocs against hidden symbols],
+ gcc_cv_as_sparc_ua_pcrel_hidden,
+ [-K PIC],
+[.data
+.align 4
+.byte 0x31
+.uaword %r_disp32(foo)
+.byte 0x32, 0x33, 0x34
+.global foo
+.hidden foo
+foo:
+.skip 4],
+ [if test x$gcc_cv_ld != x && test x$gcc_cv_objdump != x \
+ && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1 \
+ && $gcc_cv_objdump -s -j .data conftest 2> /dev/null \
+ | grep ' 31000000 07323334' > /dev/null 2>&1; then
+ if $gcc_cv_objdump -R conftest 2> /dev/null \
+ | grep 'DISP32' > /dev/null 2>&1; then
+ :
+ else
+ gcc_cv_as_sparc_ua_pcrel_hidden=yes
+ fi
+ fi
+ rm -f conftest],
+ [AC_DEFINE(HAVE_AS_SPARC_UA_PCREL_HIDDEN, 1,
+ [Define if your assembler and linker support unaligned PC relative relocs against hidden symbols.])])
+ ]) # unaligned pcrel relocs
+
+ gcc_GAS_CHECK_FEATURE([offsetable %lo()],
+ gcc_cv_as_sparc_offsetable_lo10,
+ [-xarch=v9],
+[.text
+ or %g1, %lo(ab) + 12, %g1
+ or %g1, %lo(ab + 12), %g1],
+ [if test x$gcc_cv_objdump != x \
+ && $gcc_cv_objdump -s -j .text conftest.o 2> /dev/null \
+ | grep ' 82106000 82106000' > /dev/null 2>&1; then
+ gcc_cv_as_sparc_offsetable_lo10=yes
+ fi],
+ [AC_DEFINE(HAVE_AS_OFFSETABLE_LO10, 1,
+ [Define if your assembler supports offsetable %lo().])])
+
+ gcc_GAS_CHECK_FEATURE([FMAF, HPC, and VIS 3.0 instructions],
+ gcc_cv_as_sparc_fmaf,
+ [-xarch=v9d],
+ [.text
+ .register %g2, #scratch
+ .register %g3, #scratch
+ .align 4
+ fmaddd %f0, %f2, %f4, %f6
+ addxccc %g1, %g2, %g3
+ fsrl32 %f2, %f4, %f8
+ fnaddd %f10, %f12, %f14],,
+ [AC_DEFINE(HAVE_AS_FMAF_HPC_VIS3, 1,
+ [Define if your assembler supports FMAF, HPC, and VIS 3.0 instructions.])])
+
+ gcc_GAS_CHECK_FEATURE([SPARC4 instructions],
+ gcc_cv_as_sparc_sparc4,
+ [-xarch=sparc4],
+ [.text
+ .register %g2, #scratch
+ .register %g3, #scratch
+ .align 4
+ cxbe %g2, %g3, 1f
+1: cwbneg %g2, %g3, 1f
+1: sha1
+ md5
+ aes_kexpand0 %f4, %f6, %f8
+ des_round %f38, %f40, %f42, %f44
+ camellia_f %f54, %f56, %f58, %f60
+ kasumi_fi_xor %f46, %f48, %f50, %f52],,
+ [AC_DEFINE(HAVE_AS_SPARC4, 1,
+ [Define if your assembler supports SPARC4 instructions.])])
+
+ gcc_GAS_CHECK_FEATURE([SPARC5 and VIS 4.0 instructions],
+ gcc_cv_as_sparc_sparc5,
+ [-xarch=sparc5],
+ [.text
+ .register %g2, #scratch
+ .register %g3, #scratch
+ .align 4
+ subxc %g1, %g2, %g3
+ fpadd8 %f0, %f2, %f4],,
+ [AC_DEFINE(HAVE_AS_SPARC5_VIS4, 1,
+ [Define if your assembler supports SPARC5 and VIS 4.0 instructions.])])
+
+ gcc_GAS_CHECK_FEATURE([SPARC6 instructions],
+ gcc_cv_as_sparc_sparc6,
+ [-xarch=sparc6],
+ [.text
+ .register %g2, #scratch
+ .register %g3, #scratch
+ .align 4
+ rd %entropy, %g1
+ fpsll64x %f0, %f2, %f4],,
+ [AC_DEFINE(HAVE_AS_SPARC6, 1,
+ [Define if your assembler supports SPARC6 instructions.])])
+
+ gcc_GAS_CHECK_FEATURE([LEON instructions],
+ gcc_cv_as_sparc_leon,
+ [-Aleon],
+ [.text
+ .register %g2, #scratch
+ .register %g3, #scratch
+ .align 4
+ smac %g2, %g3, %g1
+ umac %g2, %g3, %g1
+ casa [[%g2]] 0xb, %g3, %g1],,
+ [AC_DEFINE(HAVE_AS_LEON, 1,
+ [Define if your assembler supports LEON instructions.])])
+ ;;
+
+changequote(,)dnl
+ i[34567]86-*-* | x86_64-*-*)
+changequote([,])dnl
+ case $target_os in
+ cygwin*)
+ # Full C++ conformance when using a shared libstdc++-v3 requires some
+ # support from the Cygwin DLL, which in more recent versions exports
+ # wrappers to aid in interposing and redirecting operators new, delete,
+ # etc., as per n2800 #17.6.4.6 [replacement.functions]. Check if we
+ # are configuring for a version of Cygwin that exports the wrappers.
+ if test x$host = x$target && test x$host_cpu = xi686; then
+ AC_CHECK_FUNC([__wrap__Znaj],[gcc_ac_cygwin_dll_wrappers=yes],[gcc_ac_cygwin_dll_wrappers=no])
+ else
+ # Can't check presence of libc functions during cross-compile, so
+ # we just have to assume we're building for an up-to-date target.
+ gcc_ac_cygwin_dll_wrappers=yes
+ fi
+ AC_DEFINE_UNQUOTED(USE_CYGWIN_LIBSTDCXX_WRAPPERS,
+ [`if test $gcc_ac_cygwin_dll_wrappers = yes; then echo 1; else echo 0; fi`],
+ [Define if you want to generate code by default that assumes that the
+ Cygwin DLL exports wrappers to support libstdc++ function replacement.])
+ esac
+ case $target_os in
+ cygwin* | pe | mingw32*)
+ # Recent binutils allows the three-operand form of ".comm" on PE. This
+ # definition is used unconditionally to initialise the default state of
+ # the target option variable that governs usage of the feature.
+ gcc_GAS_CHECK_FEATURE([.comm with alignment], gcc_cv_as_comm_has_align,,
+ [.comm foo,1,32])
+ AC_DEFINE_UNQUOTED(HAVE_GAS_ALIGNED_COMM,
+ [`if test $gcc_cv_as_comm_has_align = yes; then echo 1; else echo 0; fi`],
+ [Define if your assembler supports specifying the alignment
+ of objects allocated using the GAS .comm command.])
+ # Used for DWARF 2 in PE
+ gcc_GAS_CHECK_FEATURE([.secrel32 relocs],
+ gcc_cv_as_ix86_pe_secrel32,,
+[.text
+foo: nop
+.data
+ .secrel32 foo],
+ [if test x$gcc_cv_ld != x \
+ && $gcc_cv_ld -o conftest conftest.o > /dev/null 2>&1; then
+ gcc_cv_as_ix86_pe_secrel32=yes
+ fi
+ rm -f conftest],
+ [AC_DEFINE(HAVE_GAS_PE_SECREL32_RELOC, 1,
+ [Define if your assembler and linker support 32-bit section relative relocs via '.secrel32 label'.])])
+ # Test if the assembler supports the extended form of the .section
+ # directive that specifies section alignment. LTO support uses this,
+ # but normally only after installation, so we warn but don't fail the
+ # configure if LTO is enabled but the assembler does not support it.
+ gcc_GAS_CHECK_FEATURE([.section with alignment], gcc_cv_as_section_has_align,
+ -fatal-warnings,[.section lto_test,"dr0"])
+ if test x$gcc_cv_as_section_has_align != xyes; then
+ case ",$enable_languages," in
+ *,lto,*)
+ AC_MSG_WARN([LTO for $target requires binutils >= 2.20.1, but version found appears insufficient; LTO will not work until binutils is upgraded.])
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ case $target_os in
+ darwin2* | darwin19*)
+ gcc_GAS_CHECK_FEATURE([llvm assembler x86-pad-for-align option],
+ gcc_cv_as_mllvm_x86_pad_for_align,
+ [-mllvm -x86-pad-for-align=false], [.text],,
+ [AC_DEFINE(HAVE_AS_MLLVM_X86_PAD_FOR_ALIGN, 1,
+ [Define if your Mac OS X assembler supports -mllvm -x86-pad-for-align=false.])])
+ ;;
+ esac
+
+ gcc_GAS_CHECK_FEATURE([-xbrace_comment], gcc_cv_as_ix86_xbrace_comment,
+ [-xbrace_comment=no], [.text],,
+ [AC_DEFINE(HAVE_AS_XBRACE_COMMENT_OPTION, 1,
+ [Define if your assembler supports -xbrace_comment option.])])
+
+ gcc_GAS_CHECK_FEATURE([filds and fists mnemonics],
+ gcc_cv_as_ix86_filds,,
+ [filds (%ebp); fists (%ebp)],,
+ [AC_DEFINE(HAVE_AS_IX86_FILDS, 1,
+ [Define if your assembler uses filds and fists mnemonics.])])
+
+ gcc_GAS_CHECK_FEATURE([fildq and fistpq mnemonics],
+ gcc_cv_as_ix86_fildq,,
+ [fildq (%ebp); fistpq (%ebp)],,
+ [AC_DEFINE(HAVE_AS_IX86_FILDQ, 1,
+ [Define if your assembler uses fildq and fistq mnemonics.])])
+
+ gcc_GAS_CHECK_FEATURE([cmov syntax],
+ gcc_cv_as_ix86_cmov_sun_syntax,,
+ [cmovl.l %edx, %eax],,
+ [AC_DEFINE(HAVE_AS_IX86_CMOV_SUN_SYNTAX, 1,
+ [Define if your assembler supports the Sun syntax for cmov.])])
+
+ gcc_GAS_CHECK_FEATURE([ffreep mnemonic],
+ gcc_cv_as_ix86_ffreep,,
+ [ffreep %st(1)],,
+ [AC_DEFINE(HAVE_AS_IX86_FFREEP, 1,
+ [Define if your assembler supports the ffreep mnemonic.])])
+
+ gcc_GAS_CHECK_FEATURE([.quad directive],
+ gcc_cv_as_ix86_quad,,
+ [.quad 0],,
+ [AC_DEFINE(HAVE_AS_IX86_QUAD, 1,
+ [Define if your assembler supports the .quad directive.])])
+
+ gcc_GAS_CHECK_FEATURE([sahf mnemonic],
+ gcc_cv_as_ix86_sahf,,
+ [.code64
+ sahf],,
+ [AC_DEFINE(HAVE_AS_IX86_SAHF, 1,
+ [Define if your assembler supports the sahf mnemonic in 64bit mode.])])
+
+ gcc_GAS_CHECK_FEATURE([interunit movq mnemonic],
+ gcc_cv_as_ix86_interunit_movq,,
+ [.code64
+ movq %mm0, %rax
+ movq %rax, %xmm0])
+ AC_DEFINE_UNQUOTED(HAVE_AS_IX86_INTERUNIT_MOVQ,
+ [`if test $gcc_cv_as_ix86_interunit_movq = yes; then echo 1; else echo 0; fi`],
+ [Define if your assembler supports interunit movq mnemonic.])
+
+ gcc_GAS_CHECK_FEATURE([hle prefixes],
+ gcc_cv_as_ix86_hle,,
+ [lock xacquire cmpxchg %esi, (%ecx)],,
+ [AC_DEFINE(HAVE_AS_IX86_HLE, 1,
+ [Define if your assembler supports HLE prefixes.])])
+
+ gcc_GAS_CHECK_FEATURE([swap suffix],
+ gcc_cv_as_ix86_swap,,
+ [movl.s %esp, %ebp],,
+ [AC_DEFINE(HAVE_AS_IX86_SWAP, 1,
+ [Define if your assembler supports the swap suffix.])])
+
+ gcc_GAS_CHECK_FEATURE([different section symbol subtraction],
+ gcc_cv_as_ix86_diff_sect_delta,,
+ [.section .rodata
+.L1:
+ .long .L2-.L1
+ .long .L3-.L1
+ .text
+.L3: nop
+.L2: nop],,
+ [AC_DEFINE(HAVE_AS_IX86_DIFF_SECT_DELTA, 1,
+ [Define if your assembler supports the subtraction of symbols in different sections.])])
+
+ gcc_GAS_CHECK_FEATURE([rep and lock prefix],
+ gcc_cv_as_ix86_rep_lock_prefix,,
+ [rep movsl
+ rep ret
+ rep nop
+ rep bsf %ecx, %eax
+ rep bsr %ecx, %eax
+ lock addl %edi, (%eax,%esi)
+ lock orl $0, (%esp)],,
+ [AC_DEFINE(HAVE_AS_IX86_REP_LOCK_PREFIX, 1,
+ [Define if the assembler supports 'rep <insn>, lock <insn>'.])])
+
+ gcc_GAS_CHECK_FEATURE([ud2 mnemonic],
+ gcc_cv_as_ix86_ud2,,
+ [ud2],,
+ [AC_DEFINE(HAVE_AS_IX86_UD2, 1,
+ [Define if your assembler supports the 'ud2' mnemonic.])])
+
+ # Enforce 32-bit output with gas and gld.
+ if test x$gas = xyes; then
+ as_ix86_gas_32_opt="--32"
+ fi
+ if echo "$ld_ver" | grep GNU > /dev/null; then
+ if $gcc_cv_ld -V 2>/dev/null | grep elf_i386_sol2 > /dev/null; then
+ ld_ix86_gld_32_opt="-melf_i386_sol2"
+ else
+ ld_ix86_gld_32_opt="-melf_i386"
+ fi
+ fi
+
+ gcc_GAS_CHECK_FEATURE([R_386_TLS_GD_PLT reloc],
+ gcc_cv_as_ix86_tlsgdplt,
+ [$as_ix86_gas_32_opt],
+ [call tls_gd@tlsgdplt],
+ [if test x$gcc_cv_ld != x \
+ && $gcc_cv_ld $ld_ix86_gld_32_opt -o conftest conftest.o -G > /dev/null 2>&1; then
+ gcc_cv_as_ix86_tlsgdplt=yes
+ fi
+ rm -f conftest],
+ [AC_DEFINE(HAVE_AS_IX86_TLSGDPLT, 1,
+ [Define if your assembler and linker support @tlsgdplt.])])
+
+ conftest_s='
+ .section .tdata,"aw'$tls_section_flag'",@progbits
+tls_ld:
+ .section .text,"ax",@progbits
+ call tls_ld@tlsldmplt'
+
+ gcc_GAS_CHECK_FEATURE([R_386_TLS_LDM_PLT reloc],
+ gcc_cv_as_ix86_tlsldmplt,
+ [$as_ix86_gas_32_opt],
+ [$conftest_s],
+ [if test x$gcc_cv_ld != x \
+ && $gcc_cv_ld $ld_ix86_gld_32_opt -o conftest conftest.o -G > /dev/null 2>&1; then
+ gcc_cv_as_ix86_tlsldmplt=yes
+ fi
+ rm -f conftest])
+ AC_DEFINE_UNQUOTED(HAVE_AS_IX86_TLSLDMPLT,
+ [`if test $gcc_cv_as_ix86_tlsldmplt = yes; then echo 1; else echo 0; fi`],
+ [Define to 1 if your assembler and linker support @tlsldmplt.])
+
+ conftest_s='
+ .section .text,"ax",@progbits
+ .globl _start
+ .type _start, @function
+_start:
+ leal value@tlsldm(%ebx), %eax
+ call ___tls_get_addr@plt
+
+ .section .tdata,"aw'$tls_section_flag'",@progbits
+ .type value, @object
+value:'
+ gcc_GAS_CHECK_FEATURE([R_386_TLS_LDM reloc],
+ gcc_cv_as_ix86_tlsldm,
+ [$as_ix86_gas_32_opt],
+ [$conftest_s],
+ [if test x$gcc_cv_ld != x && test x$gcc_cv_objdump != x \
+ && $gcc_cv_ld $ld_ix86_gld_32_opt -o conftest conftest.o $ld_tls_libs -lc > /dev/null 2>&1; then
+ if $gcc_cv_objdump -d conftest 2>/dev/null | grep nop > /dev/null \
+ || dis conftest 2>/dev/null | grep nop > /dev/null; then
+ gcc_cv_as_ix86_tlsldm=yes
+ fi
+ fi
+ rm -f conftest])
+ AC_DEFINE_UNQUOTED(HAVE_AS_IX86_TLSLDM,
+ [`if test $gcc_cv_as_ix86_tlsldm = yes; then echo 1; else echo 0; fi`],
+ [Define to 1 if your assembler and linker support @tlsldm.])
+
+ conftest_s='
+ .data
+bar:
+ .byte 1
+ .text
+ .global _start
+_start:
+ cmpl $0, bar@GOT
+ jmp *_start@GOT'
+ gcc_GAS_CHECK_FEATURE([R_386_GOT32X reloc],
+ gcc_cv_as_ix86_got32x,
+ [$as_ix86_gas_32_opt],
+ [$conftest_s],
+ [if test x$gcc_cv_ld != x && test x$gcc_cv_objdump != x \
+ && test x$gcc_cv_readelf != x \
+ && $gcc_cv_readelf --relocs --wide conftest.o 2>&1 \
+ | grep R_386_GOT32X > /dev/null 2>&1 \
+ && $gcc_cv_ld $ld_ix86_gld_32_opt -o conftest conftest.o > /dev/null 2>&1; then
+ if $gcc_cv_objdump -dw conftest 2>&1 \
+ | grep 0xffffff > /dev/null 2>&1; then
+ gcc_cv_as_ix86_got32x=no
+ else
+ gcc_cv_as_ix86_got32x=yes
+ fi
+ fi
+ rm -f conftest])
+ AC_DEFINE_UNQUOTED(HAVE_AS_IX86_GOT32X,
+ [`if test x"$gcc_cv_as_ix86_got32x" = xyes; then echo 1; else echo 0; fi`],
+ [Define 0/1 if your assembler and linker support @GOT.])
+
+ gcc_GAS_CHECK_FEATURE([GOTOFF in data],
+ gcc_cv_as_ix86_gotoff_in_data,
+ [$as_ix86_gas_32_opt],
+[ .text
+.L0:
+ nop
+ .data
+ .long .L0@GOTOFF])
+ AC_DEFINE_UNQUOTED(HAVE_AS_GOTOFF_IN_DATA,
+ [`if test $gcc_cv_as_ix86_gotoff_in_data = yes; then echo 1; else echo 0; fi`],
+ [Define true if the assembler supports '.long foo@GOTOFF'.])
+
+ conftest_s='
+ .section .text,"ax",@progbits
+ .globl _start
+ .type _start, @function
+_start:
+ leal ld@tlsldm(%ecx), %eax
+ call *___tls_get_addr@GOT(%ecx)
+ leal gd@tlsgd(%ecx), %eax
+ call *___tls_get_addr@GOT(%ecx)
+
+ .section .tdata,"aw'$tls_section_flag'",@progbits
+ .type ld, @object
+ld:
+ .byte 0
+ .globl gd
+ .type gd, @object
+gd:
+ .byte 0'
+ gcc_GAS_CHECK_FEATURE([calling ___tls_get_addr via GOT],
+ gcc_cv_as_ix86_tls_get_addr_via_got,
+ [$as_ix86_gas_32_opt],
+ [$conftest_s],
+ [if test x$gcc_cv_ld != x \
+ && $gcc_cv_ld $ld_ix86_gld_32_opt -o conftest conftest.o > /dev/null 2>&1; then
+ gcc_cv_as_ix86_tls_get_addr_via_got=yes
+ fi
+ rm -f conftest])
+ AC_DEFINE_UNQUOTED(HAVE_AS_IX86_TLS_GET_ADDR_GOT,
+ [`if test x"$gcc_cv_as_ix86_tls_get_addr_via_got" = xyes; then echo 1; else echo 0; fi`],
+ [Define 0/1 if your assembler and linker support calling ___tls_get_addr via GOT.])
+ ;;
+
+ ia64*-*-*)
+ gcc_GAS_CHECK_FEATURE([ltoffx and ldxmov relocs],
+ gcc_cv_as_ia64_ltoffx_ldxmov_relocs,,
+[ .text
+ addl r15 = @ltoffx(x#), gp
+ ;;
+ ld8.mov r16 = [[r15]], x#
+],,
+ [AC_DEFINE(HAVE_AS_LTOFFX_LDXMOV_RELOCS, 1,
+ [Define if your assembler supports ltoffx and ldxmov relocations.])])
+
+ ;;
+
+ powerpc*-*-*)
+
+ case $target in
+ *-*-darwin*)
+ gcc_GAS_CHECK_FEATURE([.machine directive support],
+ gcc_cv_as_machine_directive,,
+ [ .machine ppc7400])
+ if test x$gcc_cv_as_machine_directive != xyes; then
+ echo "*** This target requires an assembler supporting \".machine\"" >&2
+ echo you can get it from: https://gcc.gnu.org/pub/gcc/infrastructure/cctools-528.5.dmg >&2
+ test x$build = x$target && exit 1
+ fi
+ ;;
+ esac
+
+ case $target in
+ *-*-aix*) conftest_s=' .machine "pwr5"
+ .csect .text[[PR]]
+ mfcr 3,128';;
+ *-*-darwin*) conftest_s=' .text
+ mfcr r3,128';;
+ *) conftest_s=' .machine power4
+ .text
+ mfcr 3,128';;
+ esac
+
+ gcc_GAS_CHECK_FEATURE([mfcr field support],
+ gcc_cv_as_powerpc_mfcrf,,
+ [$conftest_s],,
+ [AC_DEFINE(HAVE_AS_MFCRF, 1,
+ [Define if your assembler supports mfcr field.])])
+
+ case $target in
+ *-*-aix*) conftest_s=' .csect .text[[PR]]
+LCF..0:
+ addis 11,30,_GLOBAL_OFFSET_TABLE_-LCF..0@ha';;
+ *-*-darwin*)
+ conftest_s=' .text
+LCF0:
+ addis r11,r30,_GLOBAL_OFFSET_TABLE_-LCF0@ha';;
+ *) conftest_s=' .text
+.LCF0:
+ addis 11,30,_GLOBAL_OFFSET_TABLE_-.LCF0@ha';;
+ esac
+
+ gcc_GAS_CHECK_FEATURE([rel16 relocs],
+ gcc_cv_as_powerpc_rel16, -a32,
+ [$conftest_s],,
+ [AC_DEFINE(HAVE_AS_REL16, 1,
+ [Define if your assembler supports R_PPC_REL16 relocs.])])
+
+ case $target in
+ *-*-aix*) conftest_s=' .machine "pwr7"
+ .csect .text[[PR]]
+ lxvd2x 1,2,3';;
+ *) conftest_s=' .machine power7
+ .text
+ lxvd2x 1,2,3';;
+ esac
+
+ gcc_GAS_CHECK_FEATURE([vector-scalar support],
+ gcc_cv_as_powerpc_vsx, -a32,
+ [$conftest_s],,
+ [AC_DEFINE(HAVE_AS_VSX, 1,
+ [Define if your assembler supports VSX instructions.])])
+
+ gcc_GAS_CHECK_FEATURE([.gnu_attribute support],
+ gcc_cv_as_powerpc_gnu_attribute,,
+ [.gnu_attribute 4,1],,
+ [AC_DEFINE(HAVE_AS_GNU_ATTRIBUTE, 1,
+ [Define if your assembler supports .gnu_attribute.])])
+
+ gcc_GAS_CHECK_FEATURE([prologue entry point marker support],
+ gcc_cv_as_powerpc_entry_markers,-a64 --fatal-warnings,
+ [ .reloc .,R_PPC64_ENTRY; nop],,
+ [AC_DEFINE(HAVE_AS_ENTRY_MARKERS, 1,
+ [Define if your assembler supports the R_PPC64_ENTRY relocation.])])
+
+ gcc_GAS_CHECK_FEATURE([plt sequence marker support],
+ gcc_cv_as_powerpc_pltseq_markers,-a32 --fatal-warnings,
+ [ .reloc .,R_PPC_PLTSEQ; nop],,
+ [AC_DEFINE(HAVE_AS_PLTSEQ, 1,
+ [Define if your assembler supports R_PPC*_PLTSEQ relocations.])])
+
+ case $target in
+ *-*-aix*)
+ gcc_GAS_CHECK_FEATURE([AIX .ref support],
+ gcc_cv_as_aix_ref,,
+ [ .csect stuff[[rw]]
+ stuff:
+ .long 1
+ .extern sym
+ .ref sym
+ ],,
+ [AC_DEFINE(HAVE_AS_REF, 1,
+ [Define if your assembler supports .ref])])
+
+ gcc_GAS_CHECK_FEATURE([AIX DWARF location lists section support],
+ gcc_cv_as_aix_dwloc,,
+ [ .dwsect 0xA0000
+ Lframe..0:
+ .vbyte 4,Lframe..0
+ ],,
+ [AC_DEFINE(HAVE_XCOFF_DWARF_EXTRAS, 1,
+ [Define if your assembler supports AIX debug frame section label reference.])])
+ ;;
+ esac
+ ;;
+
+ mips*-*-*)
+ gcc_GAS_CHECK_FEATURE([explicit relocation support],
+ gcc_cv_as_mips_explicit_relocs,,
+[ lw $4,%gp_rel(foo)($4)],,
+ [if test x$target_cpu_default = x
+ then target_cpu_default=MASK_EXPLICIT_RELOCS
+ else target_cpu_default="($target_cpu_default)|MASK_EXPLICIT_RELOCS"
+ fi])
+
+ gcc_GAS_CHECK_FEATURE([-mno-shared support],
+ gcc_cv_as_mips_no_shared,[-mno-shared], [nop],,
+ [AC_DEFINE(HAVE_AS_NO_SHARED, 1,
+ [Define if the assembler understands -mno-shared.])])
+
+ gcc_GAS_CHECK_FEATURE([.gnu_attribute support],
+ gcc_cv_as_mips_gnu_attribute,,
+ [.gnu_attribute 4,1],,
+ [AC_DEFINE(HAVE_AS_GNU_ATTRIBUTE, 1,
+ [Define if your assembler supports .gnu_attribute.])])
+
+ gcc_GAS_CHECK_FEATURE([.module support],
+ gcc_cv_as_mips_dot_module,[-32],
+ [.module mips2
+ .module fp=xx],,
+ [AC_DEFINE(HAVE_AS_DOT_MODULE, 1,
+ [Define if your assembler supports .module.])])
+ if test x$gcc_cv_as_mips_dot_module = xno \
+ && test x$with_fp_32 != x; then
+ AC_MSG_ERROR(
+ [Requesting --with-fp-32= requires assembler support for .module.])
+ fi
+
+ gcc_GAS_CHECK_FEATURE([.micromips support],
+ gcc_cv_as_micromips_support,[--fatal-warnings],
+ [.set micromips],,
+ [AC_DEFINE(HAVE_GAS_MICROMIPS, 1,
+ [Define if your assembler supports the .set micromips directive])])
+
+ gcc_GAS_CHECK_FEATURE([.dtprelword support],
+ gcc_cv_as_mips_dtprelword,,
+ [.section .tdata,"awT",@progbits
+x:
+ .word 2
+ .text
+ .dtprelword x+0x8000],,
+ [AC_DEFINE(HAVE_AS_DTPRELWORD, 1,
+ [Define if your assembler supports .dtprelword.])])
+
+ gcc_GAS_CHECK_FEATURE([DSPR1 mult with four accumulators support],
+ gcc_cv_as_mips_dspr1_mult,,
+[ .set mips32r2
+ .set nodspr2
+ .set dsp
+ madd $ac3,$4,$5
+ maddu $ac3,$4,$5
+ msub $ac3,$4,$5
+ msubu $ac3,$4,$5
+ mult $ac3,$4,$5
+ multu $ac3,$4,$5],,
+ [AC_DEFINE(HAVE_AS_DSPR1_MULT, 1,
+ [Define if your assembler supports DSPR1 mult.])])
+
+ AC_MSG_CHECKING(assembler and linker for explicit JALR relocation)
+ gcc_cv_as_ld_jalr_reloc=no
+ if test $gcc_cv_as_mips_explicit_relocs = yes; then
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 20 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_as_ld_jalr_reloc=yes
+ fi
+ elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x -a x$gcc_cv_objdump != x; then
+ echo ' .ent x' > conftest.s
+ echo 'x: lw $2,%got_disp(y)($3)' >> conftest.s
+ echo ' lw $25,%call16(y)($28)' >> conftest.s
+ echo ' .reloc 1f,R_MIPS_JALR,y' >> conftest.s
+ echo '1: jalr $25' >> conftest.s
+ echo ' .reloc 1f,R_MIPS_JALR,x' >> conftest.s
+ echo '1: jalr $25' >> conftest.s
+ echo ' .end x' >> conftest.s
+ if $gcc_cv_as -o conftest.o conftest.s >/dev/null 2>&AS_MESSAGE_LOG_FD \
+ && $gcc_cv_ld -shared -o conftest.so conftest.o >/dev/null 2>&AS_MESSAGE_LOG_FD; then
+ if $gcc_cv_objdump -d conftest.so | grep jalr >/dev/null 2>&1 \
+ && $gcc_cv_objdump -d conftest.so | grep "bal.*<x>" >/dev/null 2>&1; then
+ gcc_cv_as_ld_jalr_reloc=yes
+ fi
+ fi
+ rm -f conftest.*
+ fi
+ fi
+ if test $gcc_cv_as_ld_jalr_reloc = yes; then
+ if test x$target_cpu_default = x; then
+ target_cpu_default=MASK_RELAX_PIC_CALLS
+ else
+ target_cpu_default="($target_cpu_default)|MASK_RELAX_PIC_CALLS"
+ fi
+ fi
+ AC_MSG_RESULT($gcc_cv_as_ld_jalr_reloc)
+
+ AC_CACHE_CHECK([linker for .eh_frame personality relaxation],
+ [gcc_cv_ld_mips_personality_relaxation],
+ [gcc_cv_ld_mips_personality_relaxation=no
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 \
+ -a "$gcc_cv_gld_minor_version" -ge 21 \
+ -o "$gcc_cv_gld_major_version" -gt 2; then
+ gcc_cv_ld_mips_personality_relaxation=yes
+ fi
+ elif test x$gcc_cv_as != x \
+ -a x$gcc_cv_ld != x \
+ -a x$gcc_cv_readelf != x ; then
+ cat > conftest.s <<EOF
+ .cfi_startproc
+ .cfi_personality 0x80,indirect_ptr
+ .ent test
+test:
+ nop
+ .end test
+ .cfi_endproc
+
+ .section .data,"aw",@progbits
+indirect_ptr:
+ .dc.a personality
+EOF
+ if $gcc_cv_as -KPIC -o conftest.o conftest.s > /dev/null 2>&1 \
+ && $gcc_cv_ld -o conftest conftest.o -shared > /dev/null 2>&1; then
+ if $gcc_cv_readelf -d conftest 2>&1 \
+ | grep TEXTREL > /dev/null 2>&1; then
+ :
+ elif $gcc_cv_readelf --relocs conftest 2>&1 \
+ | grep 'R_MIPS_REL32 *$' > /dev/null 2>&1; then
+ :
+ else
+ gcc_cv_ld_mips_personality_relaxation=yes
+ fi
+ fi
+ fi
+ rm -f conftest.s conftest.o conftest])
+ if test x$gcc_cv_ld_mips_personality_relaxation = xyes; then
+ AC_DEFINE(HAVE_LD_PERSONALITY_RELAXATION, 1,
+ [Define if your linker can relax absolute .eh_frame personality
+pointers into PC-relative form.])
+ fi
+
+ gcc_GAS_CHECK_FEATURE([-mnan= support],
+ gcc_cv_as_mips_nan,
+ [-mnan=2008],,,
+ [AC_DEFINE(HAVE_AS_NAN, 1,
+ [Define if the assembler understands -mnan=.])])
+ if test x$gcc_cv_as_mips_nan = xno \
+ && test x$with_nan != x; then
+ AC_MSG_ERROR(
+ [Requesting --with-nan= requires assembler support for -mnan=])
+ fi
+ ;;
+ msp430-*-*)
+ # Earlier GAS versions generically support .gnu_attribute, but the
+ # msp430 assembler will not do anything with it.
+ gcc_GAS_CHECK_FEATURE([.gnu_attribute support],
+ gcc_cv_as_msp430_gnu_attribute,,
+ [.gnu_attribute 4,1],,
+ [AC_DEFINE(HAVE_AS_GNU_ATTRIBUTE, 1,
+ [Define if your assembler supports .gnu_attribute.])])
+ gcc_GAS_CHECK_FEATURE([.mspabi_attribute support],
+ gcc_cv_as_msp430_mspabi_attribute,,
+ [.mspabi_attribute 4,2],,
+ [AC_DEFINE(HAVE_AS_MSPABI_ATTRIBUTE, 1,
+ [Define if your assembler supports .mspabi_attribute.])])
+ if test x$enable_newlib_nano_formatted_io = xyes; then
+ AC_DEFINE(HAVE_NEWLIB_NANO_FORMATTED_IO, 1, [Define if GCC has been
+configured with --enable-newlib-nano-formatted-io.])
+ fi
+ ;;
+ nios2-*-*)
+ # Versions 2.33 and earlier lacked support for the %gotoff relocation
+ # syntax that is documented in the ABI specification.
+ gcc_GAS_CHECK_FEATURE([support for %gotoff relocations in constant data],
+ gcc_cv_as_nios2_gotoff_relocation,,
+[ .extern foo
+ .data
+ .long %gotoff(foo)],,
+ [AC_DEFINE(HAVE_AS_NIOS2_GOTOFF_RELOCATION, 1,
+ [Define if your assembler supports %gotoff relocation syntax.])])
+ ;;
+ riscv*-*-*)
+ gcc_GAS_CHECK_FEATURE([.attribute support],
+ gcc_cv_as_riscv_attribute,,
+ [.attribute stack_align,4],,
+ [AC_DEFINE(HAVE_AS_RISCV_ATTRIBUTE, 1,
+ [Define if your assembler supports .attribute.])])
+ gcc_GAS_CHECK_FEATURE([-misa-spec= support],
+ gcc_cv_as_riscv_isa_spec,
+ [-misa-spec=2.2],,,
+ [AC_DEFINE(HAVE_AS_MISA_SPEC, 1,
+ [Define if the assembler understands -misa-spec=.])])
+ gcc_GAS_CHECK_FEATURE([-march=rv32i_zifencei support],
+ gcc_cv_as_riscv_march_zifencei,
+ [-march=rv32i_zifencei2p0],,,
+ [AC_DEFINE(HAVE_AS_MARCH_ZIFENCEI, 1,
+ [Define if the assembler understands -march=rv*_zifencei.])])
+ ;;
+ loongarch*-*-*)
+ gcc_GAS_CHECK_FEATURE([.dtprelword support],
+ gcc_cv_as_loongarch_dtprelword, [2,18,0],,
+ [.section .tdata,"awT",@progbits
+x:
+ .word 2
+ .text
+ .dtprelword x+0x8000],,
+ [AC_DEFINE(HAVE_AS_DTPRELWORD, 1,
+ [Define if your assembler supports .dtprelword.])])
+ ;;
+ s390*-*-*)
+ gcc_GAS_CHECK_FEATURE([.gnu_attribute support],
+ gcc_cv_as_s390_gnu_attribute,,
+ [.gnu_attribute 8,1],,
+ [AC_DEFINE(HAVE_AS_GNU_ATTRIBUTE, 1,
+ [Define if your assembler supports .gnu_attribute.])])
+ gcc_GAS_CHECK_FEATURE([.machine and .machinemode support],
+ gcc_cv_as_s390_machine_machinemode,,
+ [ .machinemode push
+ .machinemode pop
+ .machine push
+ .machine pop],,
+ [AC_DEFINE(HAVE_AS_MACHINE_MACHINEMODE, 1,
+ [Define if your assembler supports .machine and .machinemode.])])
+ gcc_GAS_CHECK_FEATURE([architecture modifiers support],
+ gcc_cv_as_s390_architecture_modifiers,,
+ [ .machine z13+vx ],,
+ [AC_DEFINE(HAVE_AS_ARCHITECTURE_MODIFIERS, 1,
+ [Define if your assembler supports architecture modifiers.])])
+ gcc_GAS_CHECK_FEATURE([vector load/store alignment hints],
+ gcc_cv_as_s390_vector_loadstore_alignment_hints,,
+ [ vl %v24,0(%r15),3 ],,
+ [AC_DEFINE(HAVE_AS_VECTOR_LOADSTORE_ALIGNMENT_HINTS, 1,
+ [Define if your assembler supports vl/vst/vlm/vstm with an optional alignment hint argument.])])
+ gcc_GAS_CHECK_FEATURE([vector load/store alignment hints on z13],
+ gcc_cv_as_s390_vector_loadstore_alignment_hints_on_z13, [-mzarch -march=z13],
+ [ vl %v24,0(%r15),3 ],,
+ [AC_DEFINE(HAVE_AS_VECTOR_LOADSTORE_ALIGNMENT_HINTS_ON_Z13, 1,
+ [Define if your assembler supports vl/vst/vlm/vstm with an optional alignment hint argument on z13.])])
+
+ ;;
+esac
+
+# Mips, LoongArch and HP-UX need the GNU assembler.
+# Linux on IA64 might be able to use the Intel assembler.
+
+case "$target" in
+ mips*-*-* | loongarch*-*-* | *-*-hpux* )
+ if test x$gas_flag = xyes \
+ || test x"$host" != x"$build" \
+ || test ! -x "$gcc_cv_as" \
+ || "$gcc_cv_as" -v < /dev/null 2>&1 | grep GNU > /dev/null; then
+ :
+ else
+ echo "*** This configuration requires the GNU assembler" >&2
+ exit 1
+ fi
+ ;;
+esac
+
+# This tests if the assembler supports two registers for global_load functions
+# (like in LLVM versions <12) or one register (like in LLVM 12).
+case "$target" in
+ amdgcn-* | gcn-*)
+ AC_MSG_CHECKING(assembler fix for global_load functions)
+ gcc_cv_as_gcn_global_load_fixed=yes
+ if test x$gcc_cv_as != x; then
+ cat > conftest.s <<EOF
+ global_store_dwordx2 v[[1:2]], v[[4:5]], s[[14:15]]
+EOF
+ if $gcc_cv_as -triple=amdgcn--amdhsa -filetype=obj -mcpu=gfx900 -o conftest.o conftest.s > /dev/null 2>&1; then
+ gcc_cv_as_gcn_global_load_fixed=no
+ fi
+ rm -f conftest.s conftest.o conftest
+ fi
+ global_load_fixed=`if test x$gcc_cv_as_gcn_global_load_fixed = xyes; then echo 1; else echo 0; fi`
+ AC_DEFINE_UNQUOTED(HAVE_GCN_ASM_GLOBAL_LOAD_FIXED, $global_load_fixed,
+ [Define if your assembler has fixed global_load functions.])
+ AC_MSG_RESULT($gcc_cv_as_gcn_global_load_fixed)
+ ;;
+esac
+
+case "$target" in
+ amdgcn-* | gcn-*)
+ # Test the LLVM assembler syntax dialect; they have made a number of
+ # changes between LLVM 12 & 13 without any backward compatibility.
+ gcc_GAS_CHECK_FEATURE([assembler amdgcn_target v2/3 syntax],
+ gcc_cv_as_gcn_asm_v3_syntax,
+ [-triple=amdgcn--amdhsa -mcpu=gfx906 -mattr=+xnack],
+ [.amdgcn_target "amdgcn-unknown-amdhsa--gfx906+xnack"],,
+ [AC_DEFINE(HAVE_GCN_ASM_V3_SYNTAX, 1,
+ [Define if your assembler expects amdgcn_target gfx908+xnack syntax.])])
+ gcc_GAS_CHECK_FEATURE([assembler amdgcn_target v4 syntax],
+ gcc_cv_as_gcn_asm_v4_syntax,
+ [-triple=amdgcn--amdhsa -mcpu=gfx908 -mattr=+xnack],
+ [.amdgcn_target "amdgcn-unknown-amdhsa--gfx908:xnack+"],,
+ [AC_DEFINE(HAVE_GCN_ASM_V4_SYNTAX, 1,
+ [Define if your assembler expects amdgcn_target gfx908:xnack+ syntax.])])
+
+ # Some attribute names changed in the move to v4 ...
+ if test $gcc_cv_as_gcn_asm_v3_syntax = yes; then
+ sramopt="+sram-ecc"
+ sramattr="+sram-ecc"
+ xnackattr="+xnack"
+ elif test $gcc_cv_as_gcn_asm_v4_syntax = yes; then
+ sramopt="+sramecc"
+ sramattr=":sramecc+"
+ xnackattr=":xnack+"
+ else
+ AC_MSG_ERROR([Unrecognised assembler version])
+ fi
+
+ # Test whether the LLVM assembler accepts -mattr=+xnack without any
+ # diagnostic. LLVM 9 & 10 accept the option whether it makes sense or not,
+ # LLVM 12+ throws a warning for GPUs without support.
+ gcc_GAS_CHECK_FEATURE([assembler accepts -mattr=+xnack for fiji],
+ gcc_cv_as_gcn_xnack_ecc_fiji,
+ [-triple=amdgcn--amdhsa -mcpu=fiji -mattr=+xnack 2>conftest.err], [],
+ [grep "." conftest.err >&AS_MESSAGE_LOG_FD \
+ || gcc_cv_as_gcn_xnack_ecc_fiji=yes],
+ [AC_DEFINE(HAVE_GCN_XNACK_FIJI, 1,
+ [Define if your assembler allows -mattr=+xnack for fiji.])])
+ rm -f conftest.err
+ gcc_GAS_CHECK_FEATURE([assembler accepts -mattr=+xnack for gfx900],
+ gcc_cv_as_gcn_xnack_ecc_gfx900,
+ [-triple=amdgcn--amdhsa -mcpu=gfx900 -mattr=+xnack 2>conftest.err], [],
+ [grep "." conftest.err >&AS_MESSAGE_LOG_FD \
+ || gcc_cv_as_gcn_xnack_ecc_gfx900=yes],
+ [AC_DEFINE(HAVE_GCN_XNACK_GFX900, 1,
+ [Define if your assembler allows -mattr=+xnack for gfx900.])])
+ rm -f conftest.err
+ gcc_GAS_CHECK_FEATURE([assembler accepts -mattr=+xnack for gfx906],
+ gcc_cv_as_gcn_xnack_ecc_gfx906,
+ [-triple=amdgcn--amdhsa -mcpu=gfx906 -mattr=+xnack 2>conftest.err], [],
+ [grep "." conftest.err >&AS_MESSAGE_LOG_FD \
+ || gcc_cv_as_gcn_xnack_ecc_gfx906=yes],
+ [AC_DEFINE(HAVE_GCN_XNACK_GFX906, 1,
+ [Define if your assembler allows -mattr=+xnack for gfx906.])])
+ rm -f conftest.err
+ gcc_GAS_CHECK_FEATURE([assembler accepts -mattr=+xnack for gfx908],
+ gcc_cv_as_gcn_xnack_ecc_gfx908,
+ [-triple=amdgcn--amdhsa -mcpu=gfx908 -mattr=+xnack 2>conftest.err], [],
+ [grep "." conftest.err >&AS_MESSAGE_LOG_FD \
+ || gcc_cv_as_gcn_xnack_ecc_gfx908=yes],
+ [AC_DEFINE(HAVE_GCN_XNACK_GFX908, 1,
+ [Define if your assembler allows -mattr=+xnack for gfx908.])])
+ rm -f conftest.err
+
+ # Test whether the LLVM assembler accepts -mattr=+sramecc without any
+ # diagnostic. LLVM 9 & 10 accept the option whether it makes sense or not,
+ # (some?) LLVM 12 rejects it for all GPUs, and LLVM13 throws a warning
+ # for GPUs without support.
+ gcc_GAS_CHECK_FEATURE([assembler accepts -mattr=$sramopt for fiji],
+ gcc_cv_as_gcn_sram_ecc_fiji,
+ [-triple=amdgcn--amdhsa -mcpu=fiji -mattr=$sramopt 2>conftest.err], [],
+ [grep "." conftest.err >&AS_MESSAGE_LOG_FD \
+ || gcc_cv_as_gcn_sram_ecc_fiji=yes],
+ [AC_DEFINE(HAVE_GCN_SRAM_ECC_FIJI, 1,
+ [Define if your assembler allows -mattr=+sramecc for fiji.])])
+ rm -f conftest.err
+ gcc_GAS_CHECK_FEATURE([assembler accepts -mattr=$sramopt for gfx900],
+ gcc_cv_as_gcn_sram_ecc_gfx900,
+ [-triple=amdgcn--amdhsa -mcpu=gfx900 -mattr=$sramopt 2>conftest.err], [],
+ [grep "." conftest.err >&AS_MESSAGE_LOG_FD \
+ || gcc_cv_as_gcn_sram_ecc_gfx900=yes],
+ [AC_DEFINE(HAVE_GCN_SRAM_ECC_GFX900, 1,
+ [Define if your assembler allows -mattr=+sramecc for gfx900.])])
+ rm -f conftest.err
+ gcc_GAS_CHECK_FEATURE([assembler accepts -mattr=$sramopt for gfx906],
+ gcc_cv_as_gcn_sram_ecc_gfx906,
+ [-triple=amdgcn--amdhsa -mcpu=gfx906 -mattr=$sramopt 2>conftest.err], [],
+ [grep "." conftest.err >&AS_MESSAGE_LOG_FD \
+ || gcc_cv_as_gcn_sram_ecc_gfx906=yes],
+ [AC_DEFINE(HAVE_GCN_SRAM_ECC_GFX906, 1,
+ [Define if your assembler allows -mattr=+sramecc for gfx906.])])
+ rm -f conftest.err
+ gcc_GAS_CHECK_FEATURE([assembler accepts -mattr=$sramopt for gfx908],
+ gcc_cv_as_gcn_sram_ecc_gfx908,
+ [-triple=amdgcn--amdhsa -mcpu=gfx908 -mattr=$sramopt 2>conftest.err], [],
+ [grep "." conftest.err >&AS_MESSAGE_LOG_FD \
+ || gcc_cv_as_gcn_sram_ecc_gfx908=yes],
+ [AC_DEFINE(HAVE_GCN_SRAM_ECC_GFX908, 1,
+ [Define if your assembler allows -mattr=+sramecc for gfx908.])])
+ rm -f conftest.err
+ ;;
+ arm*)
+ gcc_GAS_CHECK_FEATURE([assembler for arm accepts context-specific architecture extensions],
+ gcc_cv_as_arm_option_extensions,
+ [-march=armv8.1-m.main+mve],
+ [.text
+ .thumb
+ .syntax unified
+ vmov.f32 s0, s1],,
+ [AC_DEFINE(HAVE_GAS_ARM_EXTENDED_ARCH, 1,
+ [Define if your Arm assembler permits context-specific feature extensions.])])
+esac
+
+# ??? Not all targets support dwarf2 debug_line, even within a version
+# of gas. Moreover, we need to emit a valid instruction to trigger any
+# info to the output file. So, as supported targets are added to gas 2.11,
+# add some instruction here to (also) show we expect this might work.
+# ??? Once 2.11 is released, probably need to add first known working
+# version to the per-target configury.
+case "$cpu_type" in
+ aarch64 | alpha | arc | arm | avr | bfin | cris | csky | i386 | loongarch | m32c \
+ | m68k | microblaze | mips | nds32 | nios2 | pa | riscv | rs6000 | score | sparc \
+ | tilegx | tilepro | visium | xstormy16 | xtensa)
+ insn="nop"
+ ;;
+ ia64 | s390)
+ insn="nop 0"
+ ;;
+ mmix)
+ insn="swym 0"
+ ;;
+esac
+if test x"$insn" != x; then
+ conftest_s="\
+ .file 1 \"conftest.s\"
+ .loc 1 3 0
+ $insn"
+ gcc_GAS_CHECK_FEATURE([dwarf2 debug_line support],
+ gcc_cv_as_dwarf2_debug_line,,
+ [$conftest_s],
+ [if test x$gcc_cv_objdump != x \
+ && $gcc_cv_objdump -h conftest.o 2> /dev/null \
+ | grep debug_line > /dev/null 2>&1; then
+ gcc_cv_as_dwarf2_debug_line=yes
+ elif test x$gcc_cv_otool != x \
+ && $gcc_cv_otool -l conftest.o 2> /dev/null \
+ | grep debug_line > /dev/null 2>&1; then
+ gcc_cv_as_dwarf2_debug_line=yes
+ fi])
+
+# The .debug_line file table must be in the exact order that
+# we specified the files, since these indices are also used
+# by DW_AT_decl_file. Approximate this test by testing if
+# the assembler bitches if the same index is assigned twice.
+ gcc_GAS_CHECK_FEATURE([buggy dwarf2 .file directive],
+ gcc_cv_as_dwarf2_file_buggy,,
+[ .file 1 "foo.s"
+ .file 1 "bar.s"])
+
+ if test $gcc_cv_as_dwarf2_debug_line = yes \
+ && test $gcc_cv_as_dwarf2_file_buggy = no; then
+ AC_DEFINE(HAVE_AS_DWARF2_DEBUG_LINE, 1,
+ [Define if your assembler supports dwarf2 .file/.loc directives,
+ and preserves file table indices exactly as given.])
+
+ if test $gcc_cv_as_leb128 = yes; then
+ conftest_s="\
+ .file 1 \"conftest.s\"
+ .loc 1 3 0 view .LVU1
+ $insn
+ .data
+ .uleb128 .LVU1
+ .uleb128 .LVU1
+"
+ gcc_GAS_CHECK_FEATURE([dwarf2 debug_view support],
+ gcc_cv_as_dwarf2_debug_view,,
+ [$conftest_s],,
+ [AC_DEFINE(HAVE_AS_DWARF2_DEBUG_VIEW, 1,
+ [Define if your assembler supports views in dwarf2 .loc directives.])])
+ fi
+ fi
+
+ gcc_GAS_CHECK_FEATURE([--gdwarf2 option],
+ gcc_cv_as_gdwarf2_flag,
+ [--gdwarf2], [$insn],,
+ [AC_DEFINE(HAVE_AS_GDWARF2_DEBUG_FLAG, 1,
+[Define if your assembler supports the --gdwarf2 option.])])
+
+ gcc_GAS_CHECK_FEATURE([--gdwarf-5 option],
+ gcc_cv_as_gdwarf_5_flag,
+ [--gdwarf-5], [$insn],
+ [if test x$gcc_cv_objdump != x \
+ && $gcc_cv_objdump -Wi conftest.o 2>&1 \
+ | grep DW_TAG_compile_unit > /dev/null 2>&1; then
+ gcc_cv_as_gdwarf_5_flag=yes;
+ fi],[AC_DEFINE(HAVE_AS_GDWARF_5_DEBUG_FLAG, 1,
+[Define if your assembler supports the --gdwarf-5 option.])])
+
+ case $target_os in
+ win32 | pe | cygwin* | mingw32*)
+ section_flags=\"dr\"
+ function_type=".def foo; .scl 2; .type 32; .endef"
+ function_size="";;
+ *)
+ section_flags=\"\",%progbits
+ function_type=".type foo, %function"
+ function_size=".size foo, .-foo";;
+ esac
+ dwarf4_debug_info_size=0x46
+ dwarf4_high_pc_form=7
+ dwarf4_debug_aranges_size=0x2c
+ dwarf4_line_sz=9
+ for dwarf4_addr_size in 8 4; do
+ conftest_s="\
+ .file \"a.c\"
+ .text
+.Ltext0:
+ .p2align 4
+ .globl foo
+ $function_type
+foo:
+.LFB0:
+.LM1:
+ $insn
+.LM2:
+.LFE0:
+ $function_size
+.Letext0:
+ .section .debug_info,$section_flags
+.Ldebug_info0:
+ .4byte $dwarf4_debug_info_size
+ .2byte 0x4
+ .4byte .Ldebug_abbrev0
+ .byte 0x$dwarf4_addr_size
+ .byte 0x1
+ .ascii \"GNU C17\\0\"
+ .byte 0xc
+ .ascii \"a.c\\0\"
+ .ascii \"/\\0\"
+ .${dwarf4_addr_size}byte .Ltext0
+ .${dwarf4_addr_size}byte .Letext0-.Ltext0
+ .4byte .Ldebug_line0
+ .byte 0x2
+ .ascii \"foo\\0\"
+ .byte 0x1
+ .byte 0x2
+ .byte 0x1
+ .${dwarf4_addr_size}byte .LFB0
+ .${dwarf4_addr_size}byte .LFE0-.LFB0
+ .byte 0x1
+ .byte 0x9c
+ .byte 0
+ .section .debug_abbrev,$section_flags
+.Ldebug_abbrev0:
+ .byte 0x1
+ .byte 0x11
+ .byte 0x1
+ .byte 0x25
+ .byte 0x8
+ .byte 0x13
+ .byte 0xb
+ .byte 0x3
+ .byte 0x8
+ .byte 0x1b
+ .byte 0x8
+ .byte 0x11
+ .byte 0x1
+ .byte 0x12
+ .byte 0x$dwarf4_high_pc_form
+ .byte 0x10
+ .byte 0x17
+ .byte 0
+ .byte 0
+ .byte 0x2
+ .byte 0x2e
+ .byte 0
+ .byte 0x3f
+ .byte 0x19
+ .byte 0x3
+ .byte 0x8
+ .byte 0x3a
+ .byte 0xb
+ .byte 0x3b
+ .byte 0xb
+ .byte 0x39
+ .byte 0xb
+ .byte 0x11
+ .byte 0x1
+ .byte 0x12
+ .byte 0x$dwarf4_high_pc_form
+ .byte 0x40
+ .byte 0x18
+ .byte 0
+ .byte 0
+ .byte 0
+ .section .debug_aranges,$section_flags
+ .4byte $dwarf4_debug_aranges_size
+ .2byte 0x2
+ .4byte .Ldebug_info0
+ .byte 0x8
+ .byte 0
+ .2byte 0
+ .2byte 0
+ .${dwarf4_addr_size}byte .Ltext0
+ .${dwarf4_addr_size}byte .Letext0-.Ltext0
+ .${dwarf4_addr_size}byte 0
+ .${dwarf4_addr_size}byte 0
+ .section .debug_line,$section_flags
+.Ldebug_line0:
+ .4byte .LELT0-.LSLT0
+.LSLT0:
+ .2byte 0x4
+ .4byte .LELTP0-.LASLTP0
+.LASLTP0:
+ .byte 0x1
+ .byte 0x1
+ .byte 0x1
+ .byte 0xf6
+ .byte 0xf2
+ .byte 0xd
+ .byte 0
+ .byte 0x1
+ .byte 0x1
+ .byte 0x1
+ .byte 0x1
+ .byte 0
+ .byte 0
+ .byte 0
+ .byte 0x1
+ .byte 0
+ .byte 0
+ .byte 0x1
+ .byte 0
+ .ascii \"a.c\\0\"
+ .byte 0
+ .byte 0
+ .byte 0
+ .byte 0
+.LELTP0:
+ .byte 0
+ .byte 0x$dwarf4_line_sz
+ .byte 0x2
+ .${dwarf4_addr_size}byte .LM1
+ .byte 0x18
+ .byte 0x5
+ .byte 0x1
+ .byte 0
+ .byte 0x$dwarf4_line_sz
+ .byte 0x2
+ .${dwarf4_addr_size}byte .LM2
+ .byte 0x1
+ .byte 0x5
+ .byte 0x1
+ .byte 0
+ .byte 0x$dwarf4_line_sz
+ .byte 0x2
+ .${dwarf4_addr_size}byte .Letext0
+ .byte 0
+ .byte 0x1
+ .byte 0x1
+.LELT0:
+ .section .debug_str,$section_flags
+ .ident \"GCC\"
+"
+ dwarf4_success=no
+ if test $dwarf4_addr_size = 4; then
+ gcc_GAS_CHECK_FEATURE([assembly of compiler generated 32-bit .debug_line],
+ gcc_cv_as_debug_line_32_flag,,
+ [$conftest_s],,
+ [dwarf4_success=yes])
+ else
+ gcc_GAS_CHECK_FEATURE([assembly of compiler generated 64-bit .debug_line],
+ gcc_cv_as_debug_line_64_flag,,
+ [$conftest_s],,
+ [dwarf4_success=yes])
+ fi
+ if test $dwarf4_success = yes; then
+ dwarf4_success=no
+ gcc_GAS_CHECK_FEATURE([--gdwarf-4 not refusing compiler generated .debug_line],
+ gcc_cv_as_dwarf_4_debug_line_flag,
+ [--gdwarf-4], [$conftest_s],,
+ [dwarf4_success=yes])
+ break
+ fi
+ dwarf4_debug_info_size=0x36
+ dwarf4_high_pc_form=6
+ dwarf4_debug_aranges_size=0x1c
+ dwarf4_line_sz=5
+ done
+
+ if test $dwarf4_success = yes; then
+ conftest_s="\
+ .file \"foo.c\"
+ .text
+bar:
+#APP
+# 82 \"xxx.h\" 1
+ $insn
+# 0 \"\" 2
+#NO_APP
+ $insn
+foo:
+ .file 1 \"foo.c\"
+ $insn
+ .file 2 \"foo.h\"
+ ret
+"
+ dwarf4_success=no
+ gcc_GAS_CHECK_FEATURE([--gdwarf-4 with the APP marker],
+ gcc_cv_as_dwarf_4_app_flag,
+ [--gdwarf-4], [$conftest_s],, [dwarf4_success=yes])
+ fi
+
+ if test $dwarf4_success = yes; then
+ conftest_s="\
+ .text
+ .globl foo
+ $function_type
+foo:
+ $insn
+ $function_size
+ .file 1 \"foo.c\"
+"
+ gcc_GAS_CHECK_FEATURE([working --gdwarf-4/--gdwarf-5 for all sources],
+ gcc_cv_as_working_gdwarf_n_flag,
+ [--gdwarf-4],
+ [$conftest_s],
+ [changequote(,)dnl
+ if test x$gcc_cv_objdump != x \
+ && $gcc_cv_objdump -W conftest.o 2>&1 \
+ | grep conftest.s > /dev/null 2>&1; then
+ gcc_cv_as_working_gdwarf_n_flag=no
+ else
+ gcc_cv_as_working_gdwarf_n_flag=yes
+ fi
+ changequote([,])dnl])
+ if test $gcc_cv_as_working_gdwarf_n_flag = yes; then
+ AC_DEFINE(HAVE_AS_WORKING_DWARF_N_FLAG, 1,
+[Define if your assembler supports --gdwarf-4/--gdwarf-5 even with
+ compiler generated .debug_line.])
+ fi
+ fi
+
+ gcc_GAS_CHECK_FEATURE([--gstabs option],
+ gcc_cv_as_gstabs_flag,
+ [--gstabs], [$insn],,
+ [AC_DEFINE(HAVE_AS_GSTABS_DEBUG_FLAG, 1,
+[Define if your assembler supports the --gstabs option.])])
+
+ gcc_GAS_CHECK_FEATURE([--debug-prefix-map option],
+ gcc_cv_as_debug_prefix_map_flag,
+ [--debug-prefix-map /a=/b], [$insn],,
+ [AC_DEFINE(HAVE_AS_DEBUG_PREFIX_MAP, 1,
+[Define if your assembler supports the --debug-prefix-map option.])])
+fi
+
+gcc_GAS_CHECK_FEATURE([compressed debug sections],
+ gcc_cv_as_compress_debug,,,
+ [# gas compiled without zlib cannot compress debug sections and warns
+ # about it, but still exits successfully. So check for this, too.
+ if $gcc_cv_as --compress-debug-sections -o conftest.o conftest.s 2>&1 | grep -i warning > /dev/null
+ then
+ gcc_cv_as_compress_debug=0
+ # Since binutils 2.26, gas supports --compress-debug-sections=type,
+ # defaulting to the ELF gABI format.
+ elif $gcc_cv_as --compress-debug-sections=zlib-gnu -o conftest.o conftest.s > /dev/null 2>&1
+ then
+ gcc_cv_as_compress_debug=2
+ gcc_cv_as_compress_debug_option="--compress-debug-sections"
+ gcc_cv_as_no_compress_debug_option="--nocompress-debug-sections"
+ # Before binutils 2.26, gas only supported --compress-debug-options and
+ # emitted the traditional GNU format.
+ elif $gcc_cv_as --compress-debug-sections -o conftest.o conftest.s > /dev/null 2>&1
+ then
+ gcc_cv_as_compress_debug=1
+ gcc_cv_as_compress_debug_option="--compress-debug-sections"
+ gcc_cv_as_no_compress_debug_option="--nocompress-debug-sections"
+ else
+ gcc_cv_as_compress_debug=0
+ fi])
+AC_DEFINE_UNQUOTED(HAVE_AS_COMPRESS_DEBUG, $gcc_cv_as_compress_debug,
+[Define to the level of your assembler's compressed debug section support.])
+AC_DEFINE_UNQUOTED(AS_COMPRESS_DEBUG_OPTION, "$gcc_cv_as_compress_debug_option",
+[Define to the assembler option to enable compressed debug sections.])
+AC_DEFINE_UNQUOTED(AS_NO_COMPRESS_DEBUG_OPTION, "$gcc_cv_as_no_compress_debug_option",
+[Define to the assembler option to disable compressed debug sections.])
+
+gcc_GAS_CHECK_FEATURE([.lcomm with alignment], gcc_cv_as_lcomm_with_alignment,,
+[.lcomm bar,4,16],,
+[AC_DEFINE(HAVE_GAS_LCOMM_WITH_ALIGNMENT, 1,
+ [Define if your assembler supports .lcomm with an alignment field.])])
+
+if test x$with_sysroot = x && test x$host = x$target \
+ && test "$prefix" != "/usr" && test "x$prefix" != "x$local_prefix" \
+ && test "$prefix" != "NONE"; then
+ AC_DEFINE_UNQUOTED(PREFIX_INCLUDE_DIR, "$prefix/include",
+[Define to PREFIX/include if cpp should also search that directory.])
+fi
+
+# Determine the version of glibc, if any, used on the target.
+AC_MSG_CHECKING([for target glibc version])
+AC_ARG_WITH([glibc-version],
+ [AS_HELP_STRING([--with-glibc-version=M.N],
+ [assume GCC used with glibc version M.N or later])], [
+if [echo "$with_glibc_version" | grep '^[0-9][0-9]*\.[0-9][0-9]*$']; then
+ glibc_version_major=`echo "$with_glibc_version" | sed -e 's/\..*//'`
+ glibc_version_minor=`echo "$with_glibc_version" | sed -e 's/.*\.//'`
+else
+ AC_MSG_ERROR([option --with-glibc-version requires a version number M.N])
+fi], [
+glibc_version_major=0
+glibc_version_minor=0
+[if test -f $target_header_dir/features.h \
+ && glibc_version_major_define=`$EGREP '^[ ]*#[ ]*define[ ]+__GLIBC__[ ]+[0-9]' $target_header_dir/features.h` \
+ && glibc_version_minor_define=`$EGREP '^[ ]*#[ ]*define[ ]+__GLIBC_MINOR__[ ]+[0-9]' $target_header_dir/features.h`; then
+ glibc_version_major=`echo "$glibc_version_major_define" | sed -e 's/.*__GLIBC__[ ]*//'`
+ glibc_version_minor=`echo "$glibc_version_minor_define" | sed -e 's/.*__GLIBC_MINOR__[ ]*//'`
+fi]])
+AC_MSG_RESULT([$glibc_version_major.$glibc_version_minor])
+AC_DEFINE_UNQUOTED([TARGET_GLIBC_MAJOR], [$glibc_version_major],
+[GNU C Library major version number used on the target, or 0.])
+AC_DEFINE_UNQUOTED([TARGET_GLIBC_MINOR], [$glibc_version_minor],
+[GNU C Library minor version number used on the target, or 0.])
+
+AC_ARG_ENABLE(gnu-unique-object,
+ [AS_HELP_STRING([--enable-gnu-unique-object],
+ [enable the use of the @gnu_unique_object ELF extension on glibc systems])],
+ [case $enable_gnu_unique_object in
+ yes | no) ;;
+ *) AC_MSG_ERROR(['$enable_gnu_unique_object' is an invalid value for --enable-gnu-unique-object.
+Valid choices are 'yes' and 'no'.]) ;;
+ esac],
+ [gcc_GAS_CHECK_FEATURE([gnu_unique_object], gcc_cv_as_gnu_unique_object,,
+ [.type foo, '$target_type_format_char'gnu_unique_object],,
+# We need to unquote above to to use the definition from config.gcc.
+# Also check for ld.so support, i.e. glibc 2.11 or higher.
+ [GCC_GLIBC_VERSION_GTE_IFELSE([2], [11], [enable_gnu_unique_object=yes], )]
+ )])
+if test x$enable_gnu_unique_object = xyes; then
+ AC_DEFINE(HAVE_GAS_GNU_UNIQUE_OBJECT, 1,
+ [Define if your assembler supports @gnu_unique_object.])
+fi
+
+AC_CACHE_CHECK([assembler for tolerance to line number 0],
+ [gcc_cv_as_line_zero],
+ [gcc_cv_as_line_zero=no
+ if test "x$gcc_cv_as" != x; then
+ { echo '# 1 "test.s" 1'; echo '# 0 "" 2'; } > conftest.s
+ if AC_TRY_COMMAND([$gcc_cv_as -o conftest.o conftest.s >&AS_MESSAGE_LOG_FD 2>conftest.out]) &&
+ test "x`cat conftest.out`" = x
+ then
+ gcc_cv_as_line_zero=yes
+ else
+ echo "configure: failed program was" >&AS_MESSAGE_LOG_FD
+ cat conftest.s >&AS_MESSAGE_LOG_FD
+ echo "configure: error output was" >&AS_MESSAGE_LOG_FD
+ cat conftest.out >&AS_MESSAGE_LOG_FD
+ fi
+ rm -f conftest.o conftest.s conftest.out
+ fi])
+if test "x$gcc_cv_as_line_zero" = xyes; then
+ AC_DEFINE([HAVE_AS_LINE_ZERO], 1,
+[Define if the assembler won't complain about a line such as # 0 "" 2.])
+fi
+
+AC_MSG_CHECKING(support for thin archives)
+thin_archive_support=no
+echo 'int main (void) { return 0; }' > conftest.c
+if ($AR --version | sed 1q | grep "GNU ar" \
+ && $CC $CFLAGS -c conftest.c \
+ && $AR rcT conftest.a conftest.o \
+ && $CC $CFLAGS $LDFLAGS -o conftest conftest.a) >/dev/null 2>&1; then
+ thin_archive_support=yes
+fi
+rm -f conftest.c conftest.o conftest.a conftest
+AC_MSG_RESULT($thin_archive_support)
+AC_SUBST(thin_archive_support)
+
+AC_MSG_CHECKING(linker PT_GNU_EH_FRAME support)
+gcc_cv_ld_eh_frame_hdr=no
+if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 12 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_eh_frame_hdr=yes
+ fi
+elif test x$gcc_cv_ld != x; then
+ if echo "$ld_ver" | grep GNU > /dev/null; then
+ # Check if linker supports --eh-frame-hdr option
+ if $gcc_cv_ld --help 2>&1 | grep eh-frame-hdr > /dev/null; then
+ gcc_cv_ld_eh_frame_hdr=yes
+ fi
+ else
+ case "$target" in
+ *-*-solaris2*)
+ # Sun ld has various bugs in .eh_frame_hdr support before version 1.2251.
+ if test "$ld_vers_major" -gt 1 || test "$ld_vers_minor" -ge 2251; then
+ gcc_cv_ld_eh_frame_hdr=yes
+ fi
+ ;;
+ esac
+ fi
+fi
+GCC_TARGET_TEMPLATE([HAVE_LD_EH_FRAME_HDR])
+if test x"$gcc_cv_ld_eh_frame_hdr" = xyes; then
+ AC_DEFINE(HAVE_LD_EH_FRAME_HDR, 1,
+[Define if your linker supports .eh_frame_hdr.])
+fi
+AC_MSG_RESULT($gcc_cv_ld_eh_frame_hdr)
+
+AC_MSG_CHECKING(linker CIEv3 in .eh_frame support)
+gcc_cv_ld_eh_frame_ciev3=no
+if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 16 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_eh_frame_ciev3=yes
+ fi
+elif test x$gcc_cv_ld != x; then
+ if echo "$ld_ver" | grep GNU > /dev/null; then
+ gcc_cv_ld_eh_frame_ciev3=yes
+ if test 0"$ld_date" -lt 20040513; then
+ if test -n "$ld_date"; then
+ # If there was date string, but was earlier than 2004-05-13, fail
+ gcc_cv_ld_eh_frame_ciev3=no
+ elif test "$ld_vers_major" -lt 2; then
+ gcc_cv_ld_eh_frame_ciev3=no
+ elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 16; then
+ gcc_cv_ld_eh_frame_ciev3=no
+ fi
+ fi
+ else
+ case "$target" in
+ *-*-solaris2*)
+ # Sun ld added support for CIE v3 in .eh_frame in Solaris 11.1.
+ if test "$ld_vers_major" -gt 1 || test "$ld_vers_minor" -ge 2324; then
+ gcc_cv_ld_eh_frame_ciev3=yes
+ fi
+ ;;
+ esac
+ fi
+fi
+AC_DEFINE_UNQUOTED(HAVE_LD_EH_FRAME_CIEV3,
+ [`if test x"$gcc_cv_ld_eh_frame_ciev3" = xyes; then echo 1; else echo 0; fi`],
+ [Define 0/1 if your linker supports CIE v3 in .eh_frame.])
+AC_MSG_RESULT($gcc_cv_ld_eh_frame_ciev3)
+
+AC_MSG_CHECKING(linker position independent executable support)
+gcc_cv_ld_pie=no
+if test $in_tree_ld = yes ; then
+ case "$target" in
+ # Full PIE support on Solaris was only introduced in gld 2.26.
+ *-*-solaris2*) gcc_gld_pie_min_version=26 ;;
+ *) gcc_gld_pie_min_version=15 ;;
+ esac
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge "$gcc_gld_pie_min_version" -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_pie=yes
+ fi
+elif test x$gcc_cv_ld != x; then
+ # Check if linker supports -pie option
+ if $gcc_cv_ld --help 2>&1 | grep -- -pie > /dev/null; then
+ gcc_cv_ld_pie=yes
+ case "$target" in
+ *-*-solaris2*)
+ if echo "$ld_ver" | grep GNU > /dev/null \
+ && test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 26; then
+ gcc_cv_ld_pie=no
+ fi
+ ;;
+ esac
+ else
+ case "$target" in
+ *-*-solaris2.1[[1-9]]*)
+ # Solaris 11.3 added PIE support.
+ if $gcc_cv_ld -z help 2>&1 | grep -- type.*pie > /dev/null; then
+ gcc_cv_ld_pie=yes
+ fi
+ ;;
+ esac
+ fi
+fi
+if test x"$gcc_cv_ld_pie" = xyes; then
+ AC_DEFINE(HAVE_LD_PIE, 1,
+[Define if your linker supports PIE option.])
+fi
+AC_MSG_RESULT($gcc_cv_ld_pie)
+
+AC_MSG_CHECKING(linker PIE support with copy reloc)
+gcc_cv_ld_pie_copyreloc=no
+if test $gcc_cv_ld_pie = yes ; then
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 25 -o "$gcc_cv_gld_major_version" -gt 2; then
+ gcc_cv_ld_pie_copyreloc=yes
+ fi
+ elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x ; then
+ # Check if linker supports -pie option with copy reloc
+ case "$target" in
+ i?86-*-linux* | x86_64-*-linux*)
+ cat > conftest1.s <<EOF
+ .globl a_glob
+ .data
+ .type a_glob, @object
+ .size a_glob, 4
+a_glob:
+ .long 2
+EOF
+ cat > conftest2.s <<EOF
+ .text
+ .globl main
+ .type main, @function
+main:
+ movl %eax, a_glob(%rip)
+ .size main, .-main
+ .globl ptr
+ .section .data.rel,"aw",@progbits
+ .type ptr, @object
+ptr:
+ .quad a_glob
+EOF
+ if $gcc_cv_as --64 -o conftest1.o conftest1.s > /dev/null 2>&1 \
+ && $gcc_cv_ld -shared -melf_x86_64 -o conftest1.so conftest1.o > /dev/null 2>&1 \
+ && $gcc_cv_as --64 -o conftest2.o conftest2.s > /dev/null 2>&1 \
+ && $gcc_cv_ld -pie -melf_x86_64 -o conftest conftest2.o conftest1.so > /dev/null 2>&1; then
+ gcc_cv_ld_pie_copyreloc=yes
+ fi
+ rm -f conftest conftest1.so conftest1.o conftest2.o conftest1.s conftest2.s
+ ;;
+ esac
+ fi
+fi
+AC_DEFINE_UNQUOTED(HAVE_LD_PIE_COPYRELOC,
+ [`if test x"$gcc_cv_ld_pie_copyreloc" = xyes; then echo 1; else echo 0; fi`],
+ [Define 0/1 if your linker supports -pie option with copy reloc.])
+AC_MSG_RESULT($gcc_cv_ld_pie_copyreloc)
+
+AC_MSG_CHECKING(linker EH-compatible garbage collection of sections)
+gcc_cv_ld_eh_gc_sections=no
+if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 17 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_eh_gc_sections=yes
+ fi
+elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x -a x$gcc_cv_objdump != x ; then
+ cat > conftest.s <<EOF
+ .section .text
+.globl _start
+ .type _start, @function
+_start:
+ .long foo
+ .size _start, .-_start
+ .section .text.foo,"ax",@progbits
+ .type foo, @function
+foo:
+ .long 0
+ .size foo, .-foo
+ .section .gcc_except_table.foo,"a",@progbits
+.L0:
+ .long 0
+ .section .eh_frame,"a",@progbits
+ .long .L0
+EOF
+ if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
+ if $gcc_cv_ld -o conftest conftest.o --entry=_start --gc-sections 2>&1 \
+ | grep "gc-sections option ignored" > /dev/null; then
+ gcc_cv_ld_eh_gc_sections=no
+ elif $gcc_cv_objdump -h conftest 2> /dev/null \
+ | grep gcc_except_table > /dev/null; then
+ gcc_cv_ld_eh_gc_sections=yes
+ # If no COMDAT groups, the compiler will emit .gnu.linkonce.t. sections.
+ if test x$gcc_cv_as_comdat_group != xyes; then
+ gcc_cv_ld_eh_gc_sections=no
+ cat > conftest.s <<EOF
+ .section .text
+.globl _start
+ .type _start, @function
+_start:
+ .long foo
+ .size _start, .-_start
+ .section .gnu.linkonce.t.foo,"ax",@progbits
+ .type foo, @function
+foo:
+ .long 0
+ .size foo, .-foo
+ .section .gcc_except_table.foo,"a",@progbits
+.L0:
+ .long 0
+ .section .eh_frame,"a",@progbits
+ .long .L0
+EOF
+ if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
+ if $gcc_cv_ld -o conftest conftest.o --entry=_start --gc-sections 2>&1 \
+ | grep "gc-sections option ignored" > /dev/null; then
+ gcc_cv_ld_eh_gc_sections=no
+ elif $gcc_cv_objdump -h conftest 2> /dev/null \
+ | grep gcc_except_table > /dev/null; then
+ gcc_cv_ld_eh_gc_sections=yes
+ fi
+ fi
+ fi
+ fi
+ fi
+ rm -f conftest.s conftest.o conftest
+fi
+case "$target" in
+ hppa*-*-linux*)
+ # ??? This apparently exposes a binutils bug with PC-relative relocations.
+ gcc_cv_ld_eh_gc_sections=no
+ ;;
+esac
+if test x$gcc_cv_ld_eh_gc_sections = xyes; then
+ AC_DEFINE(HAVE_LD_EH_GC_SECTIONS, 1,
+ [Define if your linker supports garbage collection of
+ sections in presence of EH frames.])
+fi
+AC_MSG_RESULT($gcc_cv_ld_eh_gc_sections)
+
+AC_MSG_CHECKING(linker EH garbage collection of sections bug)
+gcc_cv_ld_eh_gc_sections_bug=no
+if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -lt 19 -o "$gcc_cv_gld_major_version" -lt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_eh_gc_sections_bug=yes
+ fi
+elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x -a x$gcc_cv_objdump != x -a x$gcc_cv_as_comdat_group = xyes; then
+ gcc_cv_ld_eh_gc_sections_bug=yes
+ cat > conftest.s <<EOF
+ .section .text
+.globl _start
+ .type _start, @function
+_start:
+ .long foo
+ .size _start, .-_start
+ .section .text.startup.foo,"ax",@progbits
+ .type foo, @function
+foo:
+ .long 0
+ .size foo, .-foo
+ .section .gcc_except_table.foo,"a",@progbits
+.L0:
+ .long 0
+ .section .eh_frame,"a",@progbits
+ .long .L0
+EOF
+ if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
+ if $gcc_cv_ld -o conftest conftest.o --entry=_start --gc-sections 2>&1 \
+ | grep "gc-sections option ignored" > /dev/null; then
+ :
+ elif $gcc_cv_objdump -h conftest 2> /dev/null \
+ | grep gcc_except_table > /dev/null; then
+ gcc_cv_ld_eh_gc_sections_bug=no
+ fi
+ fi
+ rm -f conftest.s conftest.o conftest
+fi
+if test x$gcc_cv_ld_eh_gc_sections_bug = xyes; then
+ AC_DEFINE(HAVE_LD_EH_GC_SECTIONS_BUG, 1,
+ [Define if your linker has buggy garbage collection of
+ sections support when .text.startup.foo like sections are used.])
+fi
+AC_MSG_RESULT($gcc_cv_ld_eh_gc_sections_bug)
+
+AC_MSG_CHECKING(linker for compressed debug sections)
+# gold/gld support compressed debug sections since binutils 2.19/2.21
+# In binutils 2.26, gld gained support for the ELF gABI format.
+if test $in_tree_ld = yes ; then
+ gcc_cv_ld_compress_debug=0
+ if test $ld_is_mold = yes; then
+ gcc_cv_ld_compress_debug=3
+ gcc_cv_ld_compress_debug_option="--compress-debug-sections"
+ elif test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 19 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes && test $ld_is_gold = yes; then
+ gcc_cv_ld_compress_debug=2
+ gcc_cv_ld_compress_debug_option="--compress-debug-sections"
+ elif test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 26 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes && test $ld_is_gold = no; then
+ gcc_cv_ld_compress_debug=3
+ gcc_cv_ld_compress_debug_option="--compress-debug-sections"
+ elif test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 21 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_compress_debug=1
+ fi
+elif echo "$ld_ver" | grep GNU > /dev/null; then
+ if test $ld_is_mold = yes; then
+ gcc_cv_ld_compress_debug=3
+ gcc_cv_ld_compress_debug_option="--compress-debug-sections"
+ elif test "$ld_vers_major" -lt 2 \
+ || test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 21; then
+ gcc_cv_ld_compress_debug=0
+ elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 26; then
+ gcc_cv_ld_compress_debug=1
+ else
+ gcc_cv_ld_compress_debug=3
+ gcc_cv_ld_compress_debug_option="--compress-debug-sections"
+ fi
+ if test $ld_is_gold = yes; then
+ gcc_cv_ld_compress_debug=2
+ gcc_cv_ld_compress_debug_option="--compress-debug-sections"
+ fi
+else
+changequote(,)dnl
+ case "${target}" in
+ *-*-solaris2*)
+ # Introduced in Solaris 11.2.
+ if $gcc_cv_ld --help 2>&1 | grep -- '-z compress-sections' > /dev/null; then
+ gcc_cv_ld_compress_debug=3
+ gcc_cv_ld_compress_debug_option="-z compress-sections"
+ else
+ gcc_cv_ld_compress_debug=0
+ fi
+ ;;
+ *)
+ # Assume linkers other than GNU ld don't support compessed debug
+ # sections.
+ gcc_cv_ld_compress_debug=0
+ ;;
+ esac
+changequote([,])dnl
+fi
+AC_DEFINE_UNQUOTED(HAVE_LD_COMPRESS_DEBUG, $gcc_cv_ld_compress_debug,
+[Define to the level of your linker's compressed debug section support.])
+AC_DEFINE_UNQUOTED(LD_COMPRESS_DEBUG_OPTION, "$gcc_cv_ld_compress_debug_option",
+[Define to the linker option to enable compressed debug sections.])
+AC_MSG_RESULT($gcc_cv_ld_compress_debug)
+
+if test x"$ld64_flag" = x"yes"; then
+
+ # Set defaults for possibly untestable items.
+ gcc_cv_ld64_export_dynamic=0
+ gcc_cv_ld64_platform_version=0
+
+ if test "$build" = "$host"; then
+ darwin_try_test=1
+ else
+ darwin_try_test=0
+ fi
+
+ # On Darwin, because of FAT library support, it is often possible to execute
+ # exes from compatible archs even when the host differs from the build system.
+ case "$build","$host" in
+ x86_64-*-darwin*,i?86-*-darwin* | powerpc64*-*-darwin*,powerpc*-*-darwin*)
+ darwin_try_test=1;;
+ *) ;;
+ esac
+
+ # If the configurer specified a minimum ld64 version to be supported, then use
+ # that to determine feature support.
+ if test x"${gcc_cv_ld64_version}" != x; then
+ AC_MSG_CHECKING(ld64 specified version)
+ gcc_cv_ld64_major=`echo "$gcc_cv_ld64_version" | sed -e 's/\..*//'`
+ AC_MSG_RESULT($gcc_cv_ld64_major)
+ if test "$gcc_cv_ld64_major" -ge 236; then
+ gcc_cv_ld64_export_dynamic=1
+ fi
+ if test "$gcc_cv_ld64_major" -ge 512; then
+ gcc_cv_ld64_platform_version=1
+ fi
+ elif test -x "$gcc_cv_ld" -a "$darwin_try_test" -eq 1; then
+ # If the version was not specified, try to find it.
+ AC_MSG_CHECKING(linker version)
+ if test x"${gcc_cv_ld64_version}" = x; then
+ gcc_cv_ld64_version=`$gcc_cv_ld -v 2>&1 | grep ld64 | sed s/.*ld64-// | awk '{print $1}'`
+ fi
+ AC_MSG_RESULT($gcc_cv_ld64_version)
+
+ AC_MSG_CHECKING(linker for -export_dynamic support)
+ gcc_cv_ld64_export_dynamic=1
+ if $gcc_cv_ld -export_dynamic < /dev/null 2>&1 | grep 'unknown option' > /dev/null; then
+ gcc_cv_ld64_export_dynamic=0
+ fi
+ AC_MSG_RESULT($gcc_cv_ld64_export_dynamic)
+
+ AC_MSG_CHECKING(linker for -platform_version support)
+ gcc_cv_ld64_platform_version=1
+ if $gcc_cv_ld -platform_version macos 10.5 0.0 < /dev/null 2>&1 | grep 'unknown option' > /dev/null; then
+ gcc_cv_ld64_platform_version=0
+ fi
+ AC_MSG_RESULT($gcc_cv_ld64_platform_version)
+ fi
+
+ if test x"${gcc_cv_ld64_version}" != x; then
+ AC_DEFINE_UNQUOTED(LD64_VERSION, "${gcc_cv_ld64_version}",
+ [Define to ld64 version.])
+ fi
+
+ AC_DEFINE_UNQUOTED(LD64_HAS_EXPORT_DYNAMIC, $gcc_cv_ld64_export_dynamic,
+ [Define to 1 if ld64 supports '-export_dynamic'.])
+
+ AC_DEFINE_UNQUOTED(LD64_HAS_PLATFORM_VERSION, $gcc_cv_ld64_platform_version,
+ [Define to 1 if ld64 supports '-platform_version'.])
+fi
+
+if test x"$dsymutil_flag" = x"yes"; then
+
+ # If the user specified a dsymutil path, then we will already have the
+ # version string, otherwise, pick it up.
+ if test x"$gcc_cv_dsymutil" = x; then
+ AC_MSG_WARN([dsymutil is a required tool for this system, but not found])
+ dsymutil_vers="tool unspecified"
+ elif test x"$dsymutil_vers" = x; then
+ dsymutil_vers=`$gcc_cv_dsymutil -v /dev/null 2>&1`
+ fi
+
+ dsymutil_temp=`echo $dsymutil_vers | sed 1q`
+ AC_MSG_CHECKING(dsymutil version "$dsymutil_temp")
+ if echo $dsymutil_temp | grep dwarfutils- > /dev/null; then
+ dsymutil_kind=DWARFUTILS
+ dsymutil_vers=`echo $dsymutil_temp | sed 's/.*dwarfutils-\([[0-9\.]]*\).*/\1/'`
+ elif echo $dsymutil_temp | grep clang- > /dev/null; then
+ dsymutil_kind=CLANG
+ dsymutil_vers=`echo $dsymutil_temp | sed 's/.*clang-\([[0-9\.]]*\).*/\1/'`
+ elif echo $dsymutil_temp | grep 'LLVM version ' > /dev/null; then
+ dsymutil_kind=LLVM
+ dsymutil_vers=`echo $dsymutil_temp | sed 's/.*LLVM\ version\ \([[0-9\.]]*\).*/\1/'`
+ else
+ dsymutil_kind=UNKNOWN
+ dsymutil_vers="0.0"
+ fi
+ dsymutil_major=`expr "$dsymutil_vers" : '\([[0-9]]*\)'`
+ dsymutil_minor=`expr "$dsymutil_vers" : '[[0-9]]*\.\([[0-9]]*\)'`
+ dsymutil_tiny=`expr "$dsymutil_vers" : '[[0-9]]*\.[[0-9]]*\.\([[0-9]]*\)'`
+ if test x"${dsymutil_minor}" = x; then
+ dsymutil_minor=0
+ fi
+ if test x"${dsymutil_tiny}" = x; then
+ dsymutil_tiny=0
+ fi
+ AC_DEFINE_UNQUOTED(DSYMUTIL_VERSION, [$dsymutil_kind,${dsymutil_major},${dsymutil_minor},${dsymutil_tiny}],
+ [Define to the dsymutil version.])
+ AC_MSG_RESULT($dsymutil_vers : $dsymutil_kind ${dsymutil_major} ${dsymutil_minor} ${dsymutil_tiny} )
+fi
+
+case $target_os in
+ win32 | pe | cygwin* | mingw32*)
+ AC_MSG_CHECKING(broken PE linker dwarf5 support)
+ gcc_cv_ld_broken_pe_dwarf5=yes
+ if test $in_tree_ld = yes ; then
+ if grep -q '\.debug_loclists.*BLOCK.*__section_alignment__.*NOLOAD.*:' \
+ $gcc_cv_ld_gld_srcdir/scripttempl/pe*.sc \
+ && grep -q '\.debug_rnglists.*BLOCK.*__section_alignment__.*NOLOAD.*:' \
+ $gcc_cv_ld_gld_srcdir/scripttempl/pe*.sc; then
+ gcc_cv_ld_broken_pe_dwarf5=no
+ fi
+ else
+ if $gcc_cv_ld --verbose 2>&1 | grep -q '\.debug_loclists.*BLOCK.*__section_alignment__.*NOLOAD.*:' \
+ && $gcc_cv_ld --verbose 2>&1 | grep -q '\.debug_rnglists.*BLOCK.*__section_alignment__.*NOLOAD.*:'; then
+ gcc_cv_ld_broken_pe_dwarf5=no
+ fi
+ fi
+ if test x$gcc_cv_ld_broken_pe_dwarf5 = xyes; then
+ AC_DEFINE(HAVE_LD_BROKEN_PE_DWARF5, 1,
+ [Define if the PE linker has broken DWARF 5 support.])
+ fi
+ AC_MSG_RESULT($gcc_cv_ld_broken_pe_dwarf5)
+
+ AC_MSG_CHECKING(PE linker --disable-dynamicbase support)
+ gcc_cv_ld_disable_dynamicbase=no
+ if test $in_tree_ld = yes; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 36 -o "$gcc_cv_gld_major_version" -gt 2; then \
+ gcc_cv_ld_disable_dynamicbase=yes
+ fi
+ else
+ if $gcc_cv_ld --help 2>&1 | grep -q 'disable\-]dynamicbase' > /dev/null; then
+ gcc_cv_ld_disable_dynamicbase=yes
+ fi
+ fi
+ if test x"$gcc_cv_ld_disable_dynamicbase" = xyes; then
+ AC_DEFINE(HAVE_LD_PE_DISABLE_DYNAMICBASE, 1,
+ [Define if the PE linker supports --disable-dynamicbase option.])
+ fi
+ AC_MSG_RESULT($gcc_cv_ld_disable_dynamicbase)
+ ;;
+esac
+
+# --------
+# UNSORTED
+# --------
+
+AC_CACHE_CHECK(linker --as-needed support,
+gcc_cv_ld_as_needed,
+[gcc_cv_ld_as_needed=no
+gcc_cv_ld_as_needed_option='--as-needed'
+gcc_cv_ld_no_as_needed_option='--no-as-needed'
+if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 16 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_as_needed=yes
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 28; then
+ gcc_cv_ld_as_needed_option='--push-state --as-needed'
+ gcc_cv_ld_no_as_needed_option='--pop-state'
+ fi
+ fi
+elif test x$gcc_cv_ld != x; then
+ # Check if linker supports --as-needed and --no-as-needed options
+ if $gcc_cv_ld --help 2>&1 | grep as-needed > /dev/null; then
+ gcc_cv_ld_as_needed=yes
+ if $gcc_cv_ld --help 2>&1 | grep push-state > /dev/null \
+ && $gcc_cv_ld --help 2>&1 | grep pop-state > /dev/null \
+ && echo "$ld_ver" | grep GNU > /dev/null \
+ && test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -ge 28; then
+ # Use these options only when both ld.bfd and ld.gold support
+ # --push-state/--pop-state, which unfortunately wasn't added
+ # at the same time.
+ gcc_cv_ld_as_needed_option='--push-state --as-needed'
+ gcc_cv_ld_no_as_needed_option='--pop-state'
+ fi
+ fi
+ case "$target:$gnu_ld" in
+ *-*-solaris2*:no)
+ # Solaris 2 ld always supports -z ignore/-z record. Prefer the native
+ # forms.
+ gcc_cv_ld_as_needed=yes
+ gcc_cv_ld_as_needed_option="-z ignore"
+ gcc_cv_ld_no_as_needed_option="-z record"
+ ;;
+ esac
+fi
+# --as-needed/-z ignore can only be used if libgcc_s.so.1 uses
+# dl_iterate_phdr, i.e. since Solaris 11.
+case "$target" in
+ *-*-solaris2.1[[1-9]]*)
+ case "$target" in
+ i?86-*-* | x86_64-*-*)
+ if echo "$ld_ver" | grep GNU > /dev/null; then
+ # Doesn't work with gld on Solaris/x86 due to PR ld/12320.
+ gcc_cv_ld_as_needed=no
+ fi
+ ;;
+ esac
+ ;;
+ *-*-solaris2*)
+ gcc_cv_ld_as_needed=no
+ ;;
+esac
+])
+if test x"$gcc_cv_ld_as_needed" = xyes; then
+ AC_DEFINE(HAVE_LD_AS_NEEDED, 1,
+[Define if your linker supports --as-needed/--no-as-needed or equivalent options.])
+ AC_DEFINE_UNQUOTED(LD_AS_NEEDED_OPTION, "$gcc_cv_ld_as_needed_option",
+[Define to the linker option to ignore unused dependencies.])
+ AC_DEFINE_UNQUOTED(LD_NO_AS_NEEDED_OPTION, "$gcc_cv_ld_no_as_needed_option",
+[Define to the linker option to keep unused dependencies.])
+fi
+
+AC_MSG_CHECKING(linker mapfile support for clearing hardware capabilities)
+saved_LDFLAGS="$LDFLAGS"
+for clearcap_map in sol2-clearcapv2.map sol2-clearcap.map; do
+ LDFLAGS="$saved_LDFLAGS -Wl,-M,${srcdir}/config/$clearcap_map"
+ AC_LINK_IFELSE([AC_LANG_SOURCE([int main(void) {return 0;}])],
+ [gcc_cv_ld_clearcap=yes; break], [gcc_cv_ld_clearcap=no])
+done
+LDFLAGS="$saved_LDFLAGS"
+if test "x$gcc_cv_ld_clearcap" = xyes; then
+ AC_DEFINE([HAVE_LD_CLEARCAP], 1,
+[Define if the linker supports clearing hardware capabilities via mapfile.])
+ AC_CONFIG_LINKS([clearcap.map:${srcdir}/config/$clearcap_map])
+fi
+AC_MSG_RESULT($gcc_cv_ld_clearcap)
+
+case "$target" in
+ powerpc*-*-*)
+ case "$target" in
+ *le-*-linux*)
+ emul_name="-melf32lppc"
+ ;;
+ *)
+ emul_name="-melf32ppc"
+ ;;
+ esac
+ AC_CACHE_CHECK(linker .gnu.attributes long double support,
+ gcc_cv_ld_ppc_attr,
+ [gcc_cv_ld_ppc_attr=no
+ if test x"$ld_is_gold" = xyes; then
+ gcc_cv_ld_ppc_attr=yes
+ elif test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 \
+ -a "$gcc_cv_gld_minor_version" -ge 28 \
+ -o "$gcc_cv_gld_major_version" -gt 2; then
+ gcc_cv_ld_ppc_attr=yes
+ fi
+ elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x ; then
+ # check that merging the long double .gnu_attribute doesn't warn
+ cat > conftest1.s <<EOF
+ .gnu_attribute 4,1
+EOF
+ cat > conftest2.s <<EOF
+ .gnu_attribute 4,9
+EOF
+ if $gcc_cv_as -a32 -o conftest1.o conftest1.s > /dev/null 2>&1 \
+ && $gcc_cv_as -a32 -o conftest2.o conftest2.s > /dev/null 2>&1 \
+ && $gcc_cv_ld $emul_name -r -o conftest.o conftest1.o conftest2.o > /dev/null 2> conftest.err \
+ && test ! -s conftest.err; then
+ gcc_cv_ld_ppc_attr=yes
+ fi
+ rm -f conftest.err conftest.o conftest1.o conftest2.o conftest1.s conftest2.s
+ fi
+ ])
+ if test x$gcc_cv_ld_ppc_attr = xyes; then
+ AC_DEFINE(HAVE_LD_PPC_GNU_ATTR_LONG_DOUBLE, 1,
+ [Define if your PowerPC linker has .gnu.attributes long double support.])
+ fi
+ ;;
+esac
+
+case "$target:$tm_file" in
+ powerpc64*-*-freebsd* | powerpc64*-*-linux* | powerpc*-*-linux*rs6000/biarch64.h*)
+ case "$target" in
+ *le-*-linux*)
+ emul_name="-melf64lppc"
+ ;;
+ *-*-linux*)
+ emul_name="-melf64ppc"
+ ;;
+ *le-*-freebsd*)
+ emul_name="-melf64lppc_fbsd"
+ ;;
+ *-*-freebsd*)
+ emul_name="-melf64ppc_fbsd"
+ ;;
+ esac
+ AC_CACHE_CHECK(linker support for omitting dot symbols,
+ gcc_cv_ld_no_dot_syms,
+ [gcc_cv_ld_no_dot_syms=no
+ if test x"$ld_is_gold" = xyes; then
+ gcc_cv_ld_no_dot_syms=yes
+ elif test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 16 -o "$gcc_cv_gld_major_version" -gt 2; then
+ gcc_cv_ld_no_dot_syms=yes
+ fi
+ elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x ; then
+ cat > conftest1.s <<EOF
+ .text
+ bl .foo
+EOF
+ cat > conftest2.s <<EOF
+ .section ".opd","aw"
+ .align 3
+ .globl foo
+ .type foo,@function
+foo:
+ .quad .LEfoo,.TOC.@tocbase,0
+ .text
+.LEfoo:
+ blr
+ .size foo,.-.LEfoo
+EOF
+ if $gcc_cv_as -a64 -o conftest1.o conftest1.s > /dev/null 2>&1 \
+ && $gcc_cv_as -a64 -o conftest2.o conftest2.s > /dev/null 2>&1 \
+ && $gcc_cv_ld $emul_name -o conftest conftest1.o conftest2.o > /dev/null 2>&1; then
+ gcc_cv_ld_no_dot_syms=yes
+ fi
+ rm -f conftest conftest1.o conftest2.o conftest1.s conftest2.s
+ fi
+ ])
+ if test x"$gcc_cv_ld_no_dot_syms" = xyes; then
+ AC_DEFINE(HAVE_LD_NO_DOT_SYMS, 1,
+ [Define if your PowerPC64 linker only needs function descriptor syms.])
+ fi
+
+ AC_CACHE_CHECK(linker large toc support,
+ gcc_cv_ld_large_toc,
+ [gcc_cv_ld_large_toc=no
+ if test x"$ld_is_gold" = xyes; then
+ gcc_cv_ld_large_toc=yes
+ elif test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 21 -o "$gcc_cv_gld_major_version" -gt 2; then
+ gcc_cv_ld_large_toc=yes
+ fi
+ elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x ; then
+ cat > conftest.s <<EOF
+ .section ".tbss","awT",@nobits
+ .align 3
+ie0: .space 8
+ .global _start
+ .text
+_start:
+ addis 9,13,ie0@got@tprel@ha
+ ld 9,ie0@got@tprel@l(9)
+EOF
+ if $gcc_cv_as -a64 -o conftest.o conftest.s > /dev/null 2>&1 \
+ && $gcc_cv_ld $emul_name --no-toc-sort -o conftest conftest.o > /dev/null 2>&1; then
+ gcc_cv_ld_large_toc=yes
+ fi
+ rm -f conftest conftest.o conftest.s
+ fi
+ ])
+ if test x"$gcc_cv_ld_large_toc" = xyes; then
+ AC_DEFINE(HAVE_LD_LARGE_TOC, 1,
+ [Define if your PowerPC64 linker supports a large TOC.])
+ fi
+
+ AC_CACHE_CHECK(linker toc pointer alignment,
+ gcc_cv_ld_toc_align,
+ [if test x$gcc_cv_as != x -a x$gcc_cv_ld != x -a x$gcc_cv_nm != x; then
+ cat > conftest.s <<EOF
+ .global _start
+ .text
+_start:
+ addis 9,2,x@got@ha
+ .section .data.rel.ro,"aw",@progbits
+ .p2align 16
+ .space 32768
+x: .quad .TOC.
+EOF
+ if $gcc_cv_as -a64 -o conftest.o conftest.s > /dev/null 2>&1 \
+ && $gcc_cv_ld $emul_name -z norelro -o conftest conftest.o > /dev/null 2>&1; then
+ gcc_cv_ld_toc_align=`$gcc_cv_nm conftest | ${AWK} '/\.TOC\./ { match ($0, "0[[[:xdigit:]]]*", a); print strtonum ("0x" substr(a[[0]], length(a[[0]])-3)) }'`
+ fi
+ rm -f conftest conftest.o conftest.s
+ fi
+ ])
+ if test -n "$gcc_cv_ld_toc_align" && test $gcc_cv_ld_toc_align -gt 8; then
+ AC_DEFINE_UNQUOTED(POWERPC64_TOC_POINTER_ALIGNMENT, $gcc_cv_ld_toc_align,
+ [Define to .TOC. alignment forced by your linker.])
+ fi
+ ;;
+esac
+
+case "$target" in
+ *-*-aix*)
+ AC_CACHE_CHECK(linker large toc support,
+ gcc_cv_ld_large_toc,
+ [gcc_cv_ld_large_toc=no
+ if test x$gcc_cv_as != x ; then
+ cat > conftest.s <<EOF
+ .toc
+LC..1:
+ .tc a[[TC]],a[[RW]]
+ .extern a[[RW]]
+ .csect .text[[PR]]
+.largetoctest:
+ addis 9,LC..1@u(2)
+ ld 3,LC..1@l(9)
+EOF
+ if $gcc_cv_as -a64 -o conftest.o conftest.s > /dev/null 2>&1; then
+ gcc_cv_ld_large_toc=yes
+ fi
+ rm -f conftest conftest.o conftest.s
+ fi
+ ])
+ if test x"$gcc_cv_ld_large_toc" = xyes; then
+ AC_DEFINE(HAVE_LD_LARGE_TOC, 1,
+ [Define if your PowerPC64 linker supports a large TOC.])
+ fi
+ ;;
+esac
+
+AC_CACHE_CHECK(linker --build-id support,
+ gcc_cv_ld_buildid,
+ [gcc_cv_ld_buildid=no
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a \
+ "$gcc_cv_gld_minor_version" -ge 18 -o \
+ "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_buildid=yes
+ fi
+ elif test x$gcc_cv_ld != x; then
+ if $gcc_cv_ld --help 2>&1 | grep build-id > /dev/null; then
+ gcc_cv_ld_buildid=yes
+ fi
+ fi])
+if test x"$gcc_cv_ld_buildid" = xyes; then
+ AC_DEFINE(HAVE_LD_BUILDID, 1,
+ [Define if your linker supports --build-id.])
+fi
+
+AC_ARG_ENABLE(linker-build-id,
+[AS_HELP_STRING([--enable-linker-build-id],
+ [compiler will always pass --build-id to linker])],
+[],
+enable_linker_build_id=no)
+
+if test x"$enable_linker_build_id" = xyes; then
+ if test x"$gcc_cv_ld_buildid" = xyes; then
+ AC_DEFINE(ENABLE_LD_BUILDID, 1,
+ [Define if gcc should always pass --build-id to linker.])
+ else
+ AC_MSG_WARN(--build-id is not supported by your linker; --enable-linker-build-id ignored)
+ fi
+fi
+
+# In binutils 2.21, GNU ld gained support for new emulations fully
+# supporting the Solaris 2 ABI. Detect their presence in the linker used.
+AC_CACHE_CHECK(linker *_sol2 emulation support,
+ gcc_cv_ld_sol2_emulation,
+ [gcc_cv_ld_sol2_emulation=no
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a \
+ "$gcc_cv_gld_minor_version" -ge 21 -o \
+ "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_sol2_emulation=yes
+ fi
+ elif test x$gcc_cv_ld != x; then
+ if $gcc_cv_ld -V 2>/dev/null | sed -e '1,/Supported emulations/d;q' | \
+ grep _sol2 > /dev/null; then
+ gcc_cv_ld_sol2_emulation=yes
+ fi
+ fi])
+if test x"$gcc_cv_ld_sol2_emulation" = xyes; then
+ AC_DEFINE(HAVE_LD_SOL2_EMULATION, 1,
+ [Define if your linker supports the *_sol2 emulations.])
+fi
+
+AC_CACHE_CHECK(linker --sysroot support,
+ gcc_cv_ld_sysroot,
+ [gcc_cv_ld_sysroot=no
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 16 -o "$gcc_cv_gld_major_version" -gt 2 ; then
+ gcc_cv_ld_sysroot=yes
+ fi
+ elif test x$gcc_cv_ld != x; then
+ if $gcc_cv_ld --help 2>&1 | grep sysroot > /dev/null; then
+ gcc_cv_ld_sysroot=yes
+ fi
+ fi])
+if test x"$gcc_cv_ld_sysroot" = xyes; then
+ AC_DEFINE(HAVE_LD_SYSROOT, 1,
+ [Define if your linker supports --sysroot.])
+fi
+
+case $target in
+*-*-solaris2*)
+ # Check for system-provided CRTs on Solaris 11.x and Solaris 12.
+ AC_CACHE_CHECK([system-provided CRTs on Solaris],
+ gcc_cv_solaris_crts,
+ [gcc_cv_solaris_crts=no
+ if test x$host != x$target; then
+ if test "x$with_sysroot" = xyes; then
+ target_sysroot="${test_exec_prefix}/${target_noncanonical}/sys-root"
+ else
+ target_sysroot="${with_sysroot}"
+ fi
+ fi
+ target_libdir="$target_sysroot/usr/lib"
+ # At the time they were added, gcrt1.o became a symlink for backwards
+ # compatibility on x86, while crt1.o was added on sparc, so check for that.
+ case $target in
+ i?86-*-solaris2* | x86_64-*-solaris2*)
+ if test -h "$target_libdir/gcrt1.o"; then gcc_cv_solaris_crts=yes; fi
+ ;;
+ sparc*-*-solaris2*)
+ if test -f "$target_libdir/crt1.o"; then gcc_cv_solaris_crts=yes; fi
+ ;;
+ esac])
+ ;;
+esac
+if test x$gcc_cv_solaris_crts = xyes; then
+ AC_DEFINE(HAVE_SOLARIS_CRTS, 1,
+ [Define if the system-provided CRTs are present on Solaris.])
+fi
+
+AC_ARG_ENABLE(libssp,
+[AS_HELP_STRING([--enable-libssp], [enable linking against libssp])],
+[case "${enableval}" in
+ yes|no)
+ ;;
+ *)
+ AC_MSG_ERROR([unknown libssp setting $enableval])
+ ;;
+esac], [])
+
+# Test for stack protector support in target C library.
+AC_CACHE_CHECK(__stack_chk_fail in target C library,
+ gcc_cv_libc_provides_ssp,
+ [gcc_cv_libc_provides_ssp=no
+ if test "x$enable_libssp" = "xno"; then
+ gcc_cv_libc_provides_ssp=yes
+ elif test "x$enable_libssp" = "xyes"; then
+ gcc_cv_libc_provides_ssp=no
+ else
+ case "$target" in
+ *-*-musl*)
+ # All versions of musl provide stack protector
+ gcc_cv_libc_provides_ssp=yes;;
+ *-*-linux* | *-*-kfreebsd*-gnu)
+ # glibc 2.4 and later provides __stack_chk_fail and
+ # either __stack_chk_guard, or TLS access to stack guard canary.
+ GCC_GLIBC_VERSION_GTE_IFELSE([2], [4], [gcc_cv_libc_provides_ssp=yes], [
+ [if test -f $target_header_dir/features.h \
+ && $EGREP '^[ ]*#[ ]*define[ ]+__GNU_LIBRARY__[ ]+([1-9][0-9]|[6-9])' \
+ $target_header_dir/features.h > /dev/null; then
+ if $EGREP '^[ ]*#[ ]*define[ ]+__UCLIBC__[ ]+1' \
+ $target_header_dir/features.h > /dev/null && \
+ test -f $target_header_dir/bits/uClibc_config.h && \
+ $EGREP '^[ ]*#[ ]*define[ ]+__UCLIBC_HAS_SSP__[ ]+1' \
+ $target_header_dir/bits/uClibc_config.h > /dev/null; then
+ gcc_cv_libc_provides_ssp=yes
+ fi
+ # all versions of Bionic support stack protector
+ elif test -f $target_header_dir/sys/cdefs.h \
+ && $EGREP '^[ ]*#[ ]*define[ ]+__BIONIC__[ ]+1' \
+ $target_header_dir/sys/cdefs.h > /dev/null; then
+ gcc_cv_libc_provides_ssp=yes
+ fi]])
+ ;;
+ *-*-gnu*)
+ # Avoid complicated tests (see
+ # <http://gcc.gnu.org/ml/gcc/2008-10/msg00130.html>) and for now
+ # simply assert that glibc does provide this, which is true for all
+ # realistically usable GNU/Hurd configurations.
+ # All supported versions of musl provide it as well
+ gcc_cv_libc_provides_ssp=yes;;
+ *-*-darwin* | *-*-freebsd* | *-*-netbsd*)
+ AC_CHECK_FUNC(__stack_chk_fail,[gcc_cv_libc_provides_ssp=yes],
+ [echo "no __stack_chk_fail on this target"])
+ ;;
+ *) gcc_cv_libc_provides_ssp=no ;;
+ esac
+ fi])
+
+if test x$gcc_cv_libc_provides_ssp = xyes; then
+ AC_DEFINE(TARGET_LIBC_PROVIDES_SSP, 1,
+ [Define if your target C library provides stack protector support])
+fi
+
+# Check whether --enable-default-ssp was given.
+AC_ARG_ENABLE(default-ssp,
+[AS_HELP_STRING([--enable-default-ssp],
+ [enable Stack Smashing Protection as default])],[
+if test x$gcc_cv_libc_provides_ssp = xyes; then
+ case "$target" in
+ ia64*-*-*) enable_default_ssp=no ;;
+ *) enable_default_ssp=$enableval ;;
+ esac
+else
+ enable_default_ssp=no
+fi],
+enable_default_ssp=no)
+if test x$enable_default_ssp = xyes ; then
+ AC_DEFINE(ENABLE_DEFAULT_SSP, 1,
+ [Define if your target supports default stack protector and it is enabled.])
+fi
+AC_SUBST([enable_default_ssp])
+
+# Test for <sys/sdt.h> on the target.
+GCC_TARGET_TEMPLATE([HAVE_SYS_SDT_H])
+AC_MSG_CHECKING(sys/sdt.h in the target C library)
+have_sys_sdt_h=no
+if test -f $target_header_dir/sys/sdt.h; then
+ have_sys_sdt_h=yes
+ AC_DEFINE(HAVE_SYS_SDT_H, 1,
+ [Define if your target C library provides sys/sdt.h])
+fi
+AC_MSG_RESULT($have_sys_sdt_h)
+
+# Check if TFmode long double should be used by default or not.
+# Some glibc targets used DFmode long double, but with glibc 2.4
+# and later they can use TFmode.
+case "$target" in
+ powerpc*-*-linux* | \
+ sparc*-*-linux* | \
+ s390*-*-linux* | \
+ alpha*-*-linux*)
+ AC_ARG_WITH(long-double-128,
+ [AS_HELP_STRING([--with-long-double-128],
+ [use 128-bit long double by default])],
+ gcc_cv_target_ldbl128="$with_long_double_128", [
+ case "$target" in
+ s390*-*-linux-musl*)
+ gcc_cv_target_ldbl128=yes
+ ;;
+ powerpc*-*-linux-musl*)
+ gcc_cv_target_ldbl128=no
+ ;;
+ *)]
+ [GCC_GLIBC_VERSION_GTE_IFELSE([2], [4], [gcc_cv_target_ldbl128=yes], [
+ [gcc_cv_target_ldbl128=no
+ grep '^[ ]*#[ ]*define[ ][ ]*__LONG_DOUBLE_MATH_OPTIONAL' \
+ $target_header_dir/bits/wordsize.h > /dev/null 2>&1 \
+ && gcc_cv_target_ldbl128=yes
+ ]])]
+ [
+ ;;
+ esac
+ ])
+ ;;
+esac
+if test x$gcc_cv_target_ldbl128 = xyes; then
+ AC_DEFINE(TARGET_DEFAULT_LONG_DOUBLE_128, 1,
+ [Define if TFmode long double should be the default])
+fi
+
+# Check if TFmode long double target should use the IBM extended double or IEEE
+# 128-bit floating point formats if long doubles are 128-bits long. The long
+# double type can only be switched on powerpc64 bit Linux systems where VSX is
+# supported. Other PowerPC systems do not build the IEEE 128-bit emulator in
+# libgcc.
+AC_ARG_WITH([long-double-format],
+ [AS_HELP_STRING([--with-long-double-format={ieee,ibm}]
+ [Specify whether PowerPC long double uses IEEE or IBM format])],[
+case "$target:$with_long_double_format" in
+ powerpc64le-*-linux*:ieee | powerpc64le-*-linux*:ibm)
+ :
+ ;;
+ powerpc64-*-linux*:ieee | powerpc64-*-linux*:ibm)
+ # IEEE 128-bit emulation is only built on 64-bit VSX Linux systems
+ case "$with_cpu" in
+ power7 | power8 | power9 | power1*)
+ :
+ ;;
+ *)
+ AC_MSG_ERROR([Configuration option --with-long-double-format is only \
+supported if the default cpu is power7 or newer])
+ with_long_double_format=""
+ ;;
+ esac
+ ;;
+ powerpc64*-*-linux*:*)
+ AC_MSG_ERROR([--with-long-double-format argument should be ibm or ieee])
+ with_long_double_format=""
+ ;;
+ *)
+ AC_MSG_ERROR([Configure option --with-long-double-format is only supported \
+on 64-bit PowerPC VSX Linux systems])
+ with_long_double_format=""
+ ;;
+esac],
+ [])
+
+# Check if the target LIBC supports exporting the AT_PLATFORM and AT_HWCAP
+# values in the TCB. Currently, only GLIBC 2.23 and later support this.
+gcc_cv_libc_provides_hwcap_in_tcb=no
+case "$target" in
+ powerpc*-*-linux*)
+ GCC_GLIBC_VERSION_GTE_IFELSE([2], [23], [gcc_cv_libc_provides_hwcap_in_tcb=yes], )
+ ;;
+esac
+if test x$gcc_cv_libc_provides_hwcap_in_tcb = xyes; then
+ AC_DEFINE(TARGET_LIBC_PROVIDES_HWCAP_IN_TCB, 1,
+ [Define if your target C Library provides the AT_HWCAP value in the TCB])
+fi
+
+# Check if the target LIBC handles PT_GNU_STACK.
+gcc_cv_libc_gnustack=unknown
+case "$target" in
+ mips*-*-linux-musl*)
+ gcc_cv_libc_gnustack=yes
+ ;;
+ mips*-*-linux*)
+ GCC_GLIBC_VERSION_GTE_IFELSE([2], [31], [gcc_cv_libc_gnustack=yes], )
+ ;;
+esac
+if test x$gcc_cv_libc_gnustack = xyes; then
+ AC_DEFINE(TARGET_LIBC_GNUSTACK, 1,
+ [Define if your target C Library properly handles PT_GNU_STACK])
+fi
+
+AC_MSG_CHECKING(dl_iterate_phdr in target C library)
+gcc_cv_target_dl_iterate_phdr=unknown
+case "$target" in
+ *-*-solaris2*)
+ # <link.h> needs both a dl_iterate_phdr declaration and support for
+ # compilation with largefile support.
+ if grep dl_iterate_phdr $target_header_dir/link.h > /dev/null 2>&1 \
+ && grep 'large file capable' $target_header_dir/link.h > /dev/null 2>&1; then
+ gcc_cv_target_dl_iterate_phdr=yes
+ else
+ gcc_cv_target_dl_iterate_phdr=no
+ fi
+ ;;
+ *-*-dragonfly* | *-*-freebsd*)
+ if grep dl_iterate_phdr $target_header_dir/sys/link_elf.h > /dev/null 2>&1; then
+ gcc_cv_target_dl_iterate_phdr=yes
+ else
+ gcc_cv_target_dl_iterate_phdr=no
+ fi
+ ;;
+ *-linux-musl*)
+ gcc_cv_target_dl_iterate_phdr=yes
+ ;;
+esac
+GCC_TARGET_TEMPLATE([TARGET_DL_ITERATE_PHDR])
+if test x$gcc_cv_target_dl_iterate_phdr = xyes; then
+ AC_DEFINE(TARGET_DL_ITERATE_PHDR, 1,
+[Define if your target C library provides the `dl_iterate_phdr' function.])
+fi
+AC_MSG_RESULT($gcc_cv_target_dl_iterate_phdr)
+
+# We no longer support different GC mechanisms. Emit an error if
+# the user configures with --with-gc.
+AC_ARG_WITH(gc,
+[AS_HELP_STRING([--with-gc={page,zone}],
+ [this option is not supported anymore. It used to choose
+ the garbage collection mechanism to use with the compiler])],
+[AC_MSG_ERROR([Configure option --with-gc is only supported up to GCC 4.7.x])],
+[])
+
+# Libraries to use on the host. This will normally be set by the top
+# level Makefile. Here we simply capture the value for our Makefile.
+if test -z "${HOST_LIBS+set}"; then
+ HOST_LIBS=
+fi
+AC_SUBST(HOST_LIBS)
+
+# Use the system's zlib library.
+AM_ZLIB
+
+dnl Very limited version of automake's enable-maintainer-mode
+
+AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+ dnl maintainer-mode is disabled by default
+ AC_ARG_ENABLE(maintainer-mode,
+[AS_HELP_STRING([--enable-maintainer-mode],
+ [enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer])],
+ maintainer_mode=$enableval,
+ maintainer_mode=no)
+
+AC_MSG_RESULT($maintainer_mode)
+
+if test "$maintainer_mode" = "yes"; then
+ MAINT=''
+else
+ MAINT='#'
+fi
+AC_SUBST(MAINT)dnl
+
+dnl Variables for tags utilities; copied from automake 1.16.4+'s init.m4
+if test -z "$CTAGS"; then
+ CTAGS=ctags
+fi
+AC_SUBST([CTAGS])
+if test -z "$ETAGS"; then
+ ETAGS=etags
+fi
+AC_SUBST([ETAGS])
+if test -z "$CSCOPE"; then
+ CSCOPE=cscope
+fi
+AC_SUBST([CSCOPE])
+
+dnl Whether to prevent multiple front-ends from linking at the same time
+
+AC_MSG_CHECKING([whether to avoid linking multiple front-ends at once])
+ AC_ARG_ENABLE(link-mutex,
+[AS_HELP_STRING([--enable-link-mutex],
+ [avoid linking multiple front-ends at once to avoid thrashing
+ on the build machine])],
+ do_link_mutex=$enableval,
+ do_link_mutex=no)
+AC_MSG_RESULT($do_link_mutex)
+
+if test "$do_link_mutex" = "yes"; then
+ DO_LINK_MUTEX=true
+else
+ DO_LINK_MUTEX=false
+fi
+AC_SUBST(DO_LINK_MUTEX)
+
+dnl Whether to prevent multiple GCC front-ends from linking at the same time
+
+AC_MSG_CHECKING([whether to serialize linking of multiple front-ends])
+ AC_ARG_ENABLE(link-serialization,
+[AS_HELP_STRING([--enable-link-serialization],
+ [avoid linking multiple GCC front-ends at once using make
+ dependencies to avoid thrashing on the build machine])],
+ do_link_serialization=$enableval,
+ do_link_serialization=no)
+AC_MSG_RESULT($do_link_serialization)
+
+case "$do_link_serialization" in
+ yes)
+ DO_LINK_SERIALIZATION=1;;
+ [[1-9]] | [[1-9]][[0-9]] | [[1-9]][[0-9]][[0-9]])
+ DO_LINK_SERIALIZATION=$do_link_serialization;;
+ no)
+ DO_LINK_SERIALIZATION=;;
+ *)
+ AC_MSG_ERROR(bad value ${do_link_serialization} given for --enable-link-serialization) ;;
+esac
+AC_SUBST(DO_LINK_SERIALIZATION)
+
+# --------------
+# Language hooks
+# --------------
+
+# Make empty files to contain the specs and options for each language.
+# Then add #include lines to for a compiler that has specs and/or options.
+
+subdirs=
+lang_opt_files=
+lang_specs_files=
+lang_tree_files=
+# These (without "all_") are set in each config-lang.in.
+# `language' must be a single word so is spelled singularly.
+all_languages=
+all_compilers=
+all_outputs='Makefile'
+# List of language configure and makefile fragments.
+all_lang_configurefrags=
+all_lang_makefrags=
+# Additional files for gengtype
+all_gtfiles="$target_gtfiles"
+
+# These are the languages that are set in --enable-languages,
+# and are available in the GCC tree.
+all_selected_languages=
+
+# Add the language fragments.
+# Languages are added via two mechanisms. Some information must be
+# recorded in makefile variables, these are defined in config-lang.in.
+# We accumulate them and plug them into the main Makefile.
+# The other mechanism is a set of hooks for each of the main targets
+# like `clean', `install', etc.
+
+language_hooks="Make-hooks"
+
+for lang in ${srcdir}/*/config-lang.in
+do
+changequote(,)dnl
+ test "$lang" = "${srcdir}/*/config-lang.in" && continue
+
+ lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
+ if test "x$lang_alias" = x
+ then
+ echo "$lang doesn't set \$language." 1>&2
+ exit 1
+ fi
+ subdir="`echo $lang | sed -e 's,^.*/\([^/]*\)/config-lang.in$,\1,'`"
+ subdirs="$subdirs $subdir"
+
+ # $gcc_subdir is where the gcc integration files are to be found
+ # for a language, both for internal compiler purposes (compiler
+ # sources implementing front-end to GCC tree converters), and for
+ # build infrastructure purposes (Make-lang.in, etc.)
+ #
+ # This will be <subdir> (relative to $srcdir) if a line like
+ # gcc_subdir="<subdir>" or gcc_subdir=<subdir>
+ # is found in <langdir>/config-lang.in, and will remain <langdir>
+ # otherwise.
+ #
+ # Except for the language alias (fetched above), the regular
+ # "config-lang.in" contents are always retrieved from $gcc_subdir,
+ # so a <langdir>/config-lang.in setting gcc_subdir typically sets
+ # only this and the language alias.
+
+ gcc_subdir=`sed -n -e 's,^gcc_subdir=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^gcc_subdir=\([^ ]*\).*$,\1,p' $lang`
+ if [ "$gcc_subdir" = "" ]; then
+ gcc_subdir="$subdir"
+ fi
+
+ case ",$enable_languages," in
+ *,$lang_alias,*)
+ all_selected_languages="$all_selected_languages $lang_alias"
+ if test -f $srcdir/$gcc_subdir/lang-specs.h; then
+ lang_specs_files="$lang_specs_files $srcdir/$gcc_subdir/lang-specs.h"
+ fi
+ ;;
+ esac
+changequote([,])dnl
+
+ language=
+ boot_language=
+ compilers=
+ outputs=
+ gtfiles=
+ subdir_requires=
+ . ${srcdir}/$gcc_subdir/config-lang.in
+ if test "x$language" = x
+ then
+ echo "${srcdir}/$gcc_subdir/config-lang.in doesn't set \$language." 1>&2
+ exit 1
+ fi
+
+ ok=:
+ case ",$enable_languages," in
+ *,$lang_alias,*) ;;
+ *)
+ for i in $subdir_requires; do
+ test -f "${srcdir}/$i/config-lang.in" && continue
+ ok=false
+ break
+ done
+ ;;
+ esac
+ $ok || continue
+
+ all_lang_configurefrags="$all_lang_configurefrags \$(srcdir)/$gcc_subdir/config-lang.in"
+ if test "x$language" = xc && test -n "$all_lang_makefrags"; then
+ # Put c/Make-lang.in fragment first to match serialization languages order.
+ all_lang_makefrags="\$(srcdir)/$gcc_subdir/Make-lang.in $all_lang_makefrags"
+ else
+ all_lang_makefrags="$all_lang_makefrags \$(srcdir)/$gcc_subdir/Make-lang.in"
+ fi
+ if test -f $srcdir/$gcc_subdir/lang.opt; then
+ lang_opt_files="$lang_opt_files $srcdir/$gcc_subdir/lang.opt"
+ all_opt_files="$all_opt_files $srcdir/$gcc_subdir/lang.opt"
+ fi
+ if test -f $srcdir/$gcc_subdir/$subdir-tree.def; then
+ lang_tree_files="$lang_tree_files $srcdir/$gcc_subdir/$subdir-tree.def"
+ fi
+ all_languages="$all_languages $language"
+ all_compilers="$all_compilers $compilers"
+ all_outputs="$all_outputs $outputs"
+ all_gtfiles="$all_gtfiles [[$subdir]] $gtfiles"
+ case ",$enable_languages," in
+ *,lto,*)
+ AC_DEFINE(ENABLE_LTO, 1, [Define to enable LTO support.])
+ enable_lto=yes
+ AC_SUBST(enable_lto)
+ ;;
+ *) ;;
+ esac
+done
+
+check_languages=
+for language in $all_selected_languages
+do
+ check_languages="$check_languages check-$language"
+done
+
+selftest_languages=
+for language in $all_selected_languages
+do
+ selftest_languages="$selftest_languages selftest-$language"
+done
+
+# We link each language in with a set of hooks, reached indirectly via
+# lang.${target}. Only do so for selected languages.
+
+rm -f Make-hooks
+touch Make-hooks
+target_list="all.cross start.encap rest.encap tags \
+ install-common install-man install-info install-dvi install-pdf \
+ install-html dvi pdf html uninstall info man srcextra srcman srcinfo \
+ mostlyclean clean distclean maintainer-clean install-plugin"
+
+for t in $target_list
+do
+ x=
+ for lang in $all_selected_languages
+ do
+ x="$x $lang.$t"
+ done
+ echo "lang.$t: $x" >> Make-hooks
+done
+
+echo "ifeq (\$(DO_LINK_SERIALIZATION),)" >> Make-hooks
+echo "SERIAL_LIST =" >> Make-hooks
+echo else >> Make-hooks
+lang_cnt=0
+lang_list=
+prev=c
+serialization_languages=c
+for lang in $all_selected_languages
+do
+ test $lang = c && continue
+ if test $lang = lto; then
+ serialization_languages="$serialization_languages lto1 lto2"
+ else
+ serialization_languages="$serialization_languages $lang"
+ fi
+done
+for lang in $serialization_languages
+do
+ test $lang = c && continue
+ lang_cnt=`expr $lang_cnt + 1`
+ lang_list=" $prev$lang_list"
+ prev=${lang}
+done
+echo "SERIAL_LIST = \$(wordlist \$(DO_LINK_SERIALIZATION),$lang_cnt,$lang_list)" >> Make-hooks
+echo endif >> Make-hooks
+echo "SERIAL_COUNT = `expr $lang_cnt + 1`" >> Make-hooks
+echo "INDEX.c = 0" >> Make-hooks
+lang_idx=1
+for lang in $serialization_languages
+do
+ test $lang = c && continue
+ echo "$lang.prev = \$(if \$(word $lang_cnt,\$(SERIAL_LIST)),\$(\$(word $lang_cnt,\$(SERIAL_LIST)).serial))" >> Make-hooks
+ echo "INDEX.$lang = $lang_idx" >> Make-hooks
+ lang_cnt=`expr $lang_cnt - 1`
+ lang_idx=`expr $lang_idx + 1`
+done
+
+# --------
+# Option include files
+# --------
+
+${AWK} -f $srcdir/opt-include.awk $all_opt_files > option-includes.mk
+option_includes="option-includes.mk"
+AC_SUBST_FILE(option_includes)
+
+# --------
+# UNSORTED
+# --------
+
+# Create .gdbinit.
+
+echo "dir ." > .gdbinit
+echo "dir ${srcdir}" >> .gdbinit
+if test x$gdb_needs_out_file_path = xyes
+then
+ echo "dir ${srcdir}/config/"`dirname ${out_file}` >> .gdbinit
+fi
+if test "x$subdirs" != x; then
+ for s in $subdirs
+ do
+ echo "dir ${srcdir}/$s" >> .gdbinit
+ done
+fi
+echo "source ${srcdir}/gdbinit.in" >> .gdbinit
+echo "python import sys; sys.path.append('${srcdir}'); import gdbhooks" >> .gdbinit
+
+# Put a breakpoint on __asan_report_error to help with debugging buffer
+# overflow.
+case "$CFLAGS" in
+*-fsanitize=address*)
+ echo "source ${srcdir}/gdbasan.in" >> .gdbinit
+ ;;
+esac
+
+gcc_tooldir='$(libsubdir)/$(libsubdir_to_prefix)$(target_noncanonical)'
+AC_SUBST(gcc_tooldir)
+AC_SUBST(dollar)
+
+# Find a directory in which to install a shared libgcc.
+
+AC_ARG_ENABLE(version-specific-runtime-libs,
+[AS_HELP_STRING([--enable-version-specific-runtime-libs],
+ [specify that runtime libraries should be
+ installed in a compiler-specific directory])])
+
+# Substitute configuration variables
+AC_SUBST(subdirs)
+AC_SUBST(srcdir)
+AC_SUBST(all_compilers)
+AC_SUBST(all_gtfiles)
+AC_SUBST(all_lang_configurefrags)
+AC_SUBST(all_lang_makefrags)
+AC_SUBST(all_languages)
+AC_SUBST(all_selected_languages)
+AC_SUBST(build_exeext)
+AC_SUBST(build_install_headers_dir)
+AC_SUBST(build_xm_file_list)
+AC_SUBST(build_xm_include_list)
+AC_SUBST(build_xm_defines)
+AC_SUBST(build_file_translate)
+AC_SUBST(check_languages)
+AC_SUBST(selftest_languages)
+AC_SUBST(cpp_install_dir)
+AC_SUBST(xmake_file)
+AC_SUBST(tmake_file)
+AC_SUBST(TM_ENDIAN_CONFIG)
+AC_SUBST(TM_MULTILIB_CONFIG)
+AC_SUBST(TM_MULTILIB_EXCEPTIONS_CONFIG)
+AC_SUBST(extra_gcc_objs)
+AC_SUBST(user_headers_inc_next_pre)
+AC_SUBST(user_headers_inc_next_post)
+AC_SUBST(extra_headers_list)
+AC_SUBST(extra_objs)
+AC_SUBST(extra_programs)
+AC_SUBST(float_h_file)
+AC_SUBST(gcc_config_arguments)
+AC_SUBST(gcc_gxx_include_dir)
+AC_SUBST(gcc_gxx_include_dir_add_sysroot)
+AC_SUBST(gcc_gxx_libcxx_include_dir)
+AC_SUBST(gcc_gxx_libcxx_include_dir_add_sysroot)
+AC_SUBST(host_exeext)
+AC_SUBST(host_xm_file_list)
+AC_SUBST(host_xm_include_list)
+AC_SUBST(host_xm_defines)
+AC_SUBST(out_host_hook_obj)
+AC_SUBST(install)
+AC_SUBST(lang_opt_files)
+AC_SUBST(lang_specs_files)
+AC_SUBST(lang_tree_files)
+AC_SUBST(local_prefix)
+AC_SUBST(md_file)
+AC_SUBST(objc_boehm_gc)
+AC_SUBST(out_file)
+AC_SUBST(out_object_file)
+AC_SUBST(common_out_file)
+AC_SUBST(common_out_object_file)
+AC_SUBST(tm_file_list)
+AC_SUBST(tm_include_list)
+AC_SUBST(tm_defines)
+AC_SUBST(tm_p_file_list)
+AC_SUBST(tm_p_include_list)
+AC_SUBST(tm_d_file_list)
+AC_SUBST(tm_d_include_list)
+AC_SUBST(xm_file_list)
+AC_SUBST(xm_include_list)
+AC_SUBST(xm_defines)
+AC_SUBST(use_gcc_stdint)
+AC_SUBST(c_target_objs)
+AC_SUBST(cxx_target_objs)
+AC_SUBST(fortran_target_objs)
+AC_SUBST(d_target_objs)
+AC_SUBST(target_cpu_default)
+
+AC_SUBST_FILE(language_hooks)
+
+# Echo link setup.
+if test x${build} = x${host} ; then
+ if test x${host} = x${target} ; then
+ echo "Links are now set up to build a native compiler for ${target}." 1>&2
+ else
+ echo "Links are now set up to build a cross-compiler" 1>&2
+ echo " from ${host} to ${target}." 1>&2
+ fi
+else
+ if test x${host} = x${target} ; then
+ echo "Links are now set up to build (on ${build}) a native compiler" 1>&2
+ echo " for ${target}." 1>&2
+ else
+ echo "Links are now set up to build (on ${build}) a cross-compiler" 1>&2
+ echo " from ${host} to ${target}." 1>&2
+ fi
+fi
+
+AC_ARG_VAR(GMPLIBS,[How to link GMP])
+AC_ARG_VAR(GMPINC,[How to find GMP include files])
+
+AC_ARG_VAR(ISLLIBS,[How to link isl])
+AC_ARG_VAR(ISLINC,[How to find isl include files])
+if test "x${ISLLIBS}" != "x" ; then
+ AC_DEFINE(HAVE_isl, 1, [Define if isl is in use.])
+fi
+
+GCC_ENABLE_PLUGINS
+AC_SUBST(pluginlibs)
+AC_SUBST(enable_plugin)
+if test x"$enable_plugin" = x"yes"; then
+ AC_DEFINE(ENABLE_PLUGIN, 1, [Define to enable plugin support.])
+fi
+
+
+# Enable --enable-host-shared
+AC_ARG_ENABLE(host-shared,
+[AS_HELP_STRING([--enable-host-shared],
+ [build host code as shared libraries])],
+[PICFLAG=-fPIC], [PICFLAG=])
+AC_SUBST(enable_host_shared)
+AC_SUBST(PICFLAG)
+
+
+AC_ARG_ENABLE(libquadmath-support,
+[AS_HELP_STRING([--disable-libquadmath-support],
+ [disable libquadmath support for Fortran])],
+ENABLE_LIBQUADMATH_SUPPORT=$enableval,
+ENABLE_LIBQUADMATH_SUPPORT=yes)
+if test "${ENABLE_LIBQUADMATH_SUPPORT}" != "no" ; then
+ AC_DEFINE(ENABLE_LIBQUADMATH_SUPPORT, 1,
+ [Define to 1 to enable libquadmath support])
+fi
+
+
+# Specify what hash style to use by default.
+AC_ARG_WITH([linker-hash-style],
+[AC_HELP_STRING([--with-linker-hash-style={sysv,gnu,both}],
+ [specify the linker hash style])],
+[case x"$withval" in
+ xsysv)
+ LINKER_HASH_STYLE=sysv
+ ;;
+ xgnu)
+ LINKER_HASH_STYLE=gnu
+ ;;
+ xboth)
+ LINKER_HASH_STYLE=both
+ ;;
+ *)
+ AC_MSG_ERROR([$withval is an invalid option to --with-linker-hash-style])
+ ;;
+ esac],
+[LINKER_HASH_STYLE=''])
+if test x"${LINKER_HASH_STYLE}" != x; then
+ AC_DEFINE_UNQUOTED(LINKER_HASH_STYLE, "$LINKER_HASH_STYLE",
+ [The linker hash style])
+fi
+
+# Specify what should be the default of -fdiagnostics-color option.
+AC_ARG_WITH([diagnostics-color],
+[AC_HELP_STRING([--with-diagnostics-color={never,auto,auto-if-env,always}],
+ [specify the default of -fdiagnostics-color option
+ auto-if-env stands for -fdiagnostics-color=auto if
+ GCC_COLOR environment variable is present and
+ -fdiagnostics-color=never otherwise])],
+[case x"$withval" in
+ xnever)
+ DIAGNOSTICS_COLOR_DEFAULT=DIAGNOSTICS_COLOR_NO
+ ;;
+ xauto)
+ DIAGNOSTICS_COLOR_DEFAULT=DIAGNOSTICS_COLOR_AUTO
+ ;;
+ xauto-if-env)
+ DIAGNOSTICS_COLOR_DEFAULT=-1
+ ;;
+ xalways)
+ DIAGNOSTICS_COLOR_DEFAULT=DIAGNOSTICS_COLOR_YES
+ ;;
+ *)
+ AC_MSG_ERROR([$withval is an invalid option to --with-diagnostics-color])
+ ;;
+ esac],
+[DIAGNOSTICS_COLOR_DEFAULT=DIAGNOSTICS_COLOR_AUTO])
+AC_DEFINE_UNQUOTED(DIAGNOSTICS_COLOR_DEFAULT, $DIAGNOSTICS_COLOR_DEFAULT,
+ [The default for -fdiagnostics-color option])
+
+# Specify what should be the default of -fdiagnostics-urls option.
+AC_ARG_WITH([diagnostics-urls],
+[AC_HELP_STRING([--with-diagnostics-urls={never,auto,auto-if-env,always}],
+ [specify the default of -fdiagnostics-urls option
+ auto-if-env stands for -fdiagnostics-urls=auto if
+ GCC_URLS or TERM_URLS environment variable is present and
+ -fdiagnostics-urls=never otherwise])],
+[case x"$withval" in
+ xnever)
+ DIAGNOSTICS_URLS_DEFAULT=DIAGNOSTICS_URL_NO
+ ;;
+ xauto)
+ DIAGNOSTICS_URLS_DEFAULT=DIAGNOSTICS_URL_AUTO
+ ;;
+ xauto-if-env)
+ DIAGNOSTICS_URLS_DEFAULT=-1
+ ;;
+ xalways)
+ DIAGNOSTICS_URLS_DEFAULT=DIAGNOSTICS_URL_YES
+ ;;
+ *)
+ AC_MSG_ERROR([$withval is an invalid option to --with-diagnostics-urls])
+ ;;
+ esac],
+[DIAGNOSTICS_URLS_DEFAULT=DIAGNOSTICS_URL_AUTO])
+AC_DEFINE_UNQUOTED(DIAGNOSTICS_URLS_DEFAULT, $DIAGNOSTICS_URLS_DEFAULT,
+ [The default for -fdiagnostics-urls option])
+
+# Generate gcc-driver-name.h containing GCC_DRIVER_NAME for the benefit
+# of jit/jit-playback.cc.
+gcc_driver_version=`eval "${get_gcc_base_ver} $srcdir/BASE-VER"`
+echo "gcc_driver_version: ${gcc_driver_version}"
+cat > gcc-driver-name.h <<EOF
+#define GCC_DRIVER_NAME "${target_noncanonical}-gcc-${gcc_driver_version}${exeext}"
+EOF
+
+# Check whether --enable-default-pie was given.
+AC_ARG_ENABLE(default-pie,
+[AS_HELP_STRING([--enable-default-pie],
+ [enable Position Independent Executable as default])],
+enable_default_pie=$enableval,
+enable_default_pie=no)
+if test x$enable_default_pie = xyes ; then
+ AC_DEFINE(ENABLE_DEFAULT_PIE, 1,
+ [Define if your target supports default PIE and it is enabled.])
+fi
+AC_SUBST([enable_default_pie])
+
+# Check if -fno-PIE works.
+AC_CACHE_CHECK([for -fno-PIE option],
+ [gcc_cv_c_no_fpie],
+ [saved_CXXFLAGS="$CXXFLAGS"
+ CXXFLAGS="$CXXFLAGS -fno-PIE"
+ AC_COMPILE_IFELSE([AC_LANG_SOURCE([int main(void) {return 0;}])],
+ [gcc_cv_c_no_fpie=yes],
+ [gcc_cv_c_no_fpie=no])
+ CXXFLAGS="$saved_CXXFLAGS"])
+if test "$gcc_cv_c_no_fpie" = "yes"; then
+ NO_PIE_CFLAGS="-fno-PIE"
+fi
+AC_SUBST([NO_PIE_CFLAGS])
+
+# Check if -no-pie works.
+AC_CACHE_CHECK([for -no-pie option],
+ [gcc_cv_no_pie],
+ [saved_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -no-pie"
+ AC_LINK_IFELSE([AC_LANG_SOURCE([int main(void) {return 0;}])],
+ [gcc_cv_no_pie=yes],
+ [gcc_cv_no_pie=no])
+ LDFLAGS="$saved_LDFLAGS"])
+if test "$gcc_cv_no_pie" = "yes"; then
+ NO_PIE_FLAG="-no-pie"
+fi
+AC_SUBST([NO_PIE_FLAG])
+
+# Enable Intel CET on Intel CET enabled host if jit is enabled.
+GCC_CET_HOST_FLAGS(CET_HOST_FLAGS)
+case x$enable_languages in
+*jit*)
+ ;;
+*)
+ CET_HOST_FLAGS=
+ ;;
+esac
+AC_SUBST(CET_HOST_FLAGS)
+
+# Check linker supports '-z bndplt'
+ld_bndplt_support=no
+AC_MSG_CHECKING(linker -z bndplt option)
+if test x"$ld_is_gold" = xno; then
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 25 -o "$gcc_cv_gld_major_version" -gt 2; then
+ ld_bndplt_support=yes
+ fi
+ elif test x$gcc_cv_ld != x; then
+ # Check if linker supports -a bndplt option
+ if $gcc_cv_ld --help 2>&1 | grep -- '-z bndplt' > /dev/null; then
+ ld_bndplt_support=yes
+ fi
+ fi
+fi
+if test x"$ld_bndplt_support" = xyes; then
+ AC_DEFINE(HAVE_LD_BNDPLT_SUPPORT, 1,
+ [Define if your linker supports -z bndplt])
+fi
+AC_MSG_RESULT($ld_bndplt_support)
+
+# Check linker supports '--push-state'/'--pop-state'
+ld_pushpopstate_support=no
+AC_MSG_CHECKING(linker --push-state/--pop-state options)
+if test x"$ld_is_gold" = xno; then
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 25 -o "$gcc_cv_gld_major_version" -gt 2; then
+ ld_pushpopstate_support=yes
+ fi
+ elif test x$gcc_cv_ld != x; then
+ # Check if linker supports --push-state/--pop-state options
+ if $gcc_cv_ld --help 2>&1 | grep -- '--push-state' > /dev/null; then
+ ld_pushpopstate_support=yes
+ fi
+ fi
+fi
+if test x"$ld_pushpopstate_support" = xyes; then
+ AC_DEFINE(HAVE_LD_PUSHPOPSTATE_SUPPORT, 1,
+ [Define if your linker supports --push-state/--pop-state])
+fi
+AC_MSG_RESULT($ld_pushpopstate_support)
+
+# On s390, float_t has historically been statically defined as double for no
+# good reason. To comply with the C standard in the light of this definition,
+# gcc has evaluated float expressions in double precision when in
+# standards-compatible mode or when given -fexcess-precision=standard. To enable
+# a smooth transition towards the new model used by most architectures, where
+# gcc describes its behavior via the macro __FLT_EVAL_METHOD__ and glibc derives
+# float_t from that, this behavior can be configured with
+# --enable-s390-excess-float-precision. When given as enabled, that flag selects
+# the old model. When omitted, native builds and cross compiles that have target
+# libc headers will detect whether libc clamps float_t to double and in that
+# case maintain the old model. Otherwise, they will default to the new model.
+AC_ARG_ENABLE(s390-excess-float-precision,
+ [AS_HELP_STRING([--enable-s390-excess-float-precision],
+ [on s390 targets, evaluate float with double precision
+ when in standards-conforming mode])],
+ [],[enable_s390_excess_float_precision=auto])
+
+case $target in
+ s390*-linux*)
+ if test x"$enable_s390_excess_float_precision" = xauto; then
+ # Can we autodetect the behavior of the target libc?
+ if test "$target" = "$host" -a "$host" = "$build"; then
+ enable_s390_excess_float_precision=autodetect
+ elif test "x$with_headers" != xno; then
+ # cross build. are target headers available?
+ # carefully coerce the build-system compiler to use target headers
+ saved_CXXFLAGS="$CXXFLAGS"
+ fixed_XGCC_FLAGS_FOR_TARGET=`echo "$XGCC_FLAGS_FOR_TARGET" | sed 's/-B/-idirafter/g'`
+ CROSS_TEST_CXXFLAGS="-nostdinc $fixed_XGCC_FLAGS_FOR_TARGET"
+ CXXFLAGS="$CROSS_TEST_CXXFLAGS"
+ AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
+#include <math.h>
+]])], [enable_s390_excess_float_precision=autodetect], [])
+ CXXFLAGS="$saved_CXXFLAGS"
+ fi
+
+ if test x"$enable_s390_excess_float_precision" = xautodetect; then
+ saved_CXXFLAGS="$CXXFLAGS"
+ if ! test "$target" = "$host" -a "$host" = "$build"; then
+ CXXFLAGS="$CROSS_TEST_CXXFLAGS"
+ unset CROSS_TEST_CXXFLAGS
+ fi
+ AC_CACHE_CHECK([for glibc clamping float_t to double],
+ gcc_cv_float_t_clamped_to_double, [
+ AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
+#define __FLT_EVAL_METHOD__ 0
+#include <math.h>
+int dummy[sizeof(float_t) == sizeof(double) ? 1 : -1];
+]])],
+ [gcc_cv_float_t_clamped_to_double=yes],
+ [gcc_cv_float_t_clamped_to_double=no])])
+ CXXFLAGS="$saved_CXXFLAGS"
+ enable_s390_excess_float_precision="$gcc_cv_float_t_clamped_to_double"
+ else
+ # no way to detect behavior of target libc, default to new model
+ enable_s390_excess_float_precision=no
+ fi
+ fi
+
+ GCC_TARGET_TEMPLATE(ENABLE_S390_EXCESS_FLOAT_PRECISION)
+ if test x"$enable_s390_excess_float_precision" = xyes; then
+ AC_DEFINE(ENABLE_S390_EXCESS_FLOAT_PRECISION, 1,
+[Define to enable evaluating float expressions with double precision in
+standards-compatible mode on s390 targets.])
+ fi
+ ;;
+esac
+
+# Configure the subdirectories
+# AC_CONFIG_SUBDIRS($subdirs)
+
+# Create the Makefile
+# and configure language subdirectories
+AC_CONFIG_FILES($all_outputs)
+
+AC_CONFIG_COMMANDS([default],
+[
+case ${CONFIG_HEADERS} in
+ *auto-host.h:config.in*)
+ echo > cstamp-h ;;
+esac
+# Make sure all the subdirs exist.
+for d in $subdirs doc build common c-family
+do
+ test -d $d || mkdir $d
+done
+],
+[subdirs='$subdirs'])
+AC_OUTPUT
+
Index: gcc
===================================================================
--- gcc (nonexistent)
+++ gcc (revision 5)
Property changes on: gcc
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,80 ##
+
+# Target build dirs
+.noarch
+.host
+
+.arm32-newlib
+.a33xx-newlib
+.a9xx-newlib
+.h5-newlib
+.s9xx-newlib
+.rk33xx-newlib
+.m1000-newlib
+.riscv64-newlib
+.at91sam7s-newlib
+
+.a1x-glibc
+.a2x-glibc
+.a311x-glibc
+.h3-glibc
+.h5-glibc
+.imx6-glibc
+.imx6ull-glibc
+.jz47xx-glibc
+.p5600-glibc
+.m1000-glibc
+.omap543x-glibc
+.am335x-glibc
+.rk328x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.a9xx-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.a33xx-glibc
+.power8-glibc
+.power9-glibc
+.power8le-glibc
+.power9le-glibc
+.riscv64-glibc
+.i586-glibc
+.i686-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.src_requires
+.src_requires_depend
+.dist
+
+# Destinations
+dist
+
+
+# Tarballs
+*.gz
+*.bz2
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Text files
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# Object Files
+*.[ao]
+
+# backup copies
+*~
Index: .
===================================================================
--- . (nonexistent)
+++ . (revision 5)
Property changes on: .
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,80 ##
+
+# Target build dirs
+.noarch
+.host
+
+.arm32-newlib
+.a33xx-newlib
+.a9xx-newlib
+.h5-newlib
+.s9xx-newlib
+.rk33xx-newlib
+.m1000-newlib
+.riscv64-newlib
+.at91sam7s-newlib
+
+.a1x-glibc
+.a2x-glibc
+.a311x-glibc
+.h3-glibc
+.h5-glibc
+.imx6-glibc
+.imx6ull-glibc
+.jz47xx-glibc
+.p5600-glibc
+.m1000-glibc
+.omap543x-glibc
+.am335x-glibc
+.rk328x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.a9xx-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.a33xx-glibc
+.power8-glibc
+.power9-glibc
+.power8le-glibc
+.power9le-glibc
+.riscv64-glibc
+.i586-glibc
+.i686-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.src_requires
+.src_requires_depend
+.dist
+
+# Destinations
+dist
+
+
+# Tarballs
+*.gz
+*.bz2
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Text files
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# Object Files
+*.[ao]
+
+# backup copies
+*~
Radix cross Linux Toolchains
Toolchains for all supported by Radix cross Linux devices
80 Commits
2 Branches
13 Tags