Radix cross Linux

Index: create.patch.sh
===================================================================
--- create.patch.sh	(nonexistent)
+++ create.patch.sh	(revision 5)
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+VERSION=1.0.2u
+
+tar --files-from=file.list -xzvf ../openssl-$VERSION.tar.gz
+mv openssl-$VERSION openssl-$VERSION-orig
+
+cp -rf ./openssl-$VERSION-new ./openssl-$VERSION
+
+diff --unified -Nr  openssl-$VERSION-orig  openssl-$VERSION > openssl-$VERSION-shlib.patch
+
+mv openssl-$VERSION-shlib.patch ../patches
+
+rm -rf ./openssl-$VERSION
+rm -rf ./openssl-$VERSION-orig

Property changes on: create.patch.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: file.list
===================================================================
--- file.list	(nonexistent)
+++ file.list	(revision 5)
@@ -0,0 +1,2 @@
+openssl-1.0.2u/Makefile
+openssl-1.0.2u/Makefile.org
Index: openssl-1.0.2u-new/Makefile
===================================================================
--- openssl-1.0.2u-new/Makefile	(nonexistent)
+++ openssl-1.0.2u-new/Makefile	(revision 5)
@@ -0,0 +1,691 @@
+### Generated automatically from Makefile.org by Configure.
+
+##
+## Makefile for OpenSSL
+##
+
+VERSION=1.0.2u
+MAJOR=1
+MINOR=0.2
+SHLIB_VERSION_NUMBER=1.0.0
+SHLIB_VERSION_HISTORY=
+SHLIB_MAJOR=1
+SHLIB_MINOR=0.0
+SHLIB_EXT=.so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
+PLATFORM=linux-x86_64
+OPTIONS=-Wa,--noexecstack no-ec_nistp_64_gcc_128 no-gmp no-jpake no-krb5 no-libunbound no-md2 no-rc5 no-rfc3779 no-sctp no-shared no-ssl-trace no-ssl2 no-store no-unit-test no-weak-ssl-ciphers no-zlib no-zlib-dynamic static-engine
+CONFIGURE_ARGS=linux-x86_64 -Wa,--noexecstack
+SHLIB_TARGET=linux-shared
+
+# HERE indicates where this Makefile lives.  This can be used to indicate
+# where sub-Makefiles are expected to be.  Currently has very limited usage,
+# and should probably not be bothered with at all.
+HERE=.
+
+# INSTALL_PREFIX is for package builders so that they can configure
+# for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
+# Normally it is left empty.
+INSTALL_PREFIX=
+INSTALLTOP=/usr/local/ssl
+
+# Do not edit this manually. Use Configure --openssldir=DIR do change this!
+OPENSSLDIR=/usr/local/ssl
+
+# NO_IDEA - Define to build without the IDEA algorithm
+# NO_RC4  - Define to build without the RC4 algorithm
+# NO_RC2  - Define to build without the RC2 algorithm
+# THREADS - Define when building with threads, you will probably also need any
+#           system defines as well, i.e. _REENTERANT for Solaris 2.[34]
+# TERMIO  - Define the termio terminal subsystem, needed if sgtty is missing.
+# TERMIOS - Define the termios terminal subsystem, Silicon Graphics.
+# LONGCRYPT - Define to use HPUX 10.x's long password modification to crypt(3).
+# DEVRANDOM - Give this the value of the 'random device' if your OS supports
+#           one.  32 bytes will be read from this when the random
+#           number generator is initalised.
+# SSL_FORBID_ENULL - define if you want the server to be not able to use the
+#           NULL encryption ciphers.
+#
+# LOCK_DEBUG - turns on lots of lock debug output :-)
+# REF_CHECK - turn on some xyz_free() assertions.
+# REF_PRINT - prints some stuff on structure free.
+# CRYPTO_MDEBUG - turns on my 'memory leak' detecting stuff
+# MFUNC - Make all Malloc/Free/Realloc calls call
+#       CRYPTO_malloc/CRYPTO_free/CRYPTO_realloc which can be setup to
+#       call application defined callbacks via CRYPTO_set_mem_functions()
+# MD5_ASM needs to be defined to use the x86 assembler for MD5
+# SHA1_ASM needs to be defined to use the x86 assembler for SHA1
+# RMD160_ASM needs to be defined to use the x86 assembler for RIPEMD160
+# Do not define B_ENDIAN or L_ENDIAN if 'unsigned long' == 8.  It must
+# equal 4.
+# PKCS1_CHECK - pkcs1 tests.
+
+CC= gcc
+CFLAG= -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -Wa,--noexecstack -m64 -DL_ENDIAN -O3 -Wall -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DRC4_ASM -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DAES_ASM -DVPAES_ASM -DBSAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM -DECP_NISTZ256_ASM
+DEPFLAG= -DOPENSSL_NO_EC_NISTP_64_GCC_128 -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -DOPENSSL_NO_LIBUNBOUND -DOPENSSL_NO_MD2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_SCTP -DOPENSSL_NO_SSL_TRACE -DOPENSSL_NO_SSL2 -DOPENSSL_NO_STORE -DOPENSSL_NO_UNIT_TEST -DOPENSSL_NO_WEAK_SSL_CIPHERS
+PEX_LIBS= 
+EX_LIBS= -ldl
+EXE_EXT= 
+ARFLAGS= 
+AR= ar $(ARFLAGS) r
+RANLIB= /usr/bin/ranlib
+RC= windres
+NM= nm
+PERL= /usr/bin/perl
+TAR= tar
+TARFLAGS= --no-recursion
+MAKEDEPPROG= gcc
+LIBDIR=lib
+
+# We let the C compiler driver to take care of .s files. This is done in
+# order to be excused from maintaining a separate set of architecture
+# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
+# gcc, then the driver will automatically translate it to -xarch=v8plus
+# and pass it down to assembler.
+AS=$(CC) -c
+ASFLAG=$(CFLAG)
+
+# For x86 assembler: Set PROCESSOR to 386 if you want to support
+# the 80386.
+PROCESSOR= 
+
+# CPUID module collects small commonly used assembler snippets
+CPUID_OBJ= x86_64cpuid.o
+BN_ASM= x86_64-gcc.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o rsaz_exp.o rsaz-x86_64.o rsaz-avx2.o
+EC_ASM= ecp_nistz256.o ecp_nistz256-x86_64.o
+DES_ENC= des_enc.o fcrypt_b.o
+AES_ENC= aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o aesni-x86_64.o aesni-sha1-x86_64.o aesni-sha256-x86_64.o aesni-mb-x86_64.o
+BF_ENC= bf_enc.o
+CAST_ENC= c_enc.o
+RC4_ENC= rc4-x86_64.o rc4-md5-x86_64.o
+RC5_ENC= rc5_enc.o
+MD5_ASM_OBJ= md5-x86_64.o
+SHA1_ASM_OBJ= sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o sha1-mb-x86_64.o sha256-mb-x86_64.o
+RMD160_ASM_OBJ= 
+WP_ASM_OBJ= wp-x86_64.o
+CMLL_ENC= cmll-x86_64.o cmll_misc.o
+MODES_ASM_OBJ= ghash-x86_64.o aesni-gcm-x86_64.o
+ENGINES_ASM_OBJ= 
+PERLASM_SCHEME= elf
+
+# KRB5 stuff
+KRB5_INCLUDES=
+LIBKRB5=
+
+# Zlib stuff
+ZLIB_INCLUDE=
+LIBZLIB=
+
+# TOP level FIPS install directory.
+FIPSDIR=/usr/local/ssl/fips-2.0
+
+# This is the location of fipscanister.o and friends.
+# The FIPS module build will place it $(INSTALLTOP)/lib
+# but since $(INSTALLTOP) can only take the default value
+# when the module is built it will be in /usr/local/ssl/lib
+# $(INSTALLTOP) for this build may be different so hard
+# code the path.
+
+FIPSLIBDIR=
+
+# The location of the library which contains fipscanister.o
+# normally it will be libcrypto unless fipsdso is set in which
+# case it will be libfips. If not compiling in FIPS mode at all
+# this is empty making it a useful test for a FIPS compile.
+
+FIPSCANLIB=
+
+# Shared library base address. Currently only used on Windows.
+#
+
+BASEADDR=0xFB00000
+
+DIRS=   crypto ssl engines apps test tools
+ENGDIRS= ccgost
+SHLIBDIRS= crypto ssl
+
+# dirs in crypto to build
+SDIRS=  \
+	objects \
+	md4 md5 sha mdc2 hmac ripemd whrlpool \
+	des aes rc2 rc4 idea bf cast camellia seed modes \
+	bn ec rsa dsa ecdsa dh ecdh dso engine \
+	buffer bio stack lhash rand err \
+	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
+	cms pqueue ts srp cmac
+# keep in mind that the above list is adjusted by ./Configure
+# according to no-xxx arguments...
+
+# tests to perform.  "alltests" is a special word indicating that all tests
+# should be performed.
+TESTS = alltests
+
+MAKEFILE= Makefile
+
+MANDIR=$(OPENSSLDIR)/man
+MAN1=1
+MAN3=3
+MANSUFFIX=
+HTMLSUFFIX=html
+HTMLDIR=$(OPENSSLDIR)/html
+SHELL=/bin/sh
+
+TOP=    .
+ONEDIRS=out tmp
+EDIRS=  times doc bugs util include certs ms shlib mt demos perl sf dep VMS
+WDIRS=  windows
+LIBS=   libcrypto.a libssl.a
+SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
+SHARED_SSL=libssl$(SHLIB_EXT)
+SHARED_LIBS=
+SHARED_LIBS_LINK_EXTS=.so.$(SHLIB_MAJOR) .so
+SHARED_LDFLAGS=-m64
+
+GENERAL=        Makefile
+BASENAME=       openssl
+NAME=           $(BASENAME)-$(VERSION)
+TARFILE=        ../$(NAME).tar
+EXHEADER=       e_os2.h
+HEADER=         e_os.h
+
+all: Makefile build_all
+
+# as we stick to -e, CLEARENV ensures that local variables in lower
+# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
+# shell, which [annoyingly enough] terminates unset with error if VAR
+# is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh,
+# which terminates unset with error if no variable was present:-(
+CLEARENV=	TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}	\
+		$${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES}	\
+		$${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC}		\
+		$${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL}	\
+		$${EXHEADER+EXHEADER} $${HEADER+HEADER}		\
+		$${GENERAL+GENERAL} $${CFLAGS+CFLAGS}		\
+		$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS}		\
+		$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS}	\
+		$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS}	\
+		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}	\
+		$${APPS+APPS}
+
+# LC_ALL=C ensures that error [and other] messages are delivered in
+# same language for uniform treatment.
+BUILDENV=	LC_ALL=C PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)'\
+		CC='$(CC)' CFLAG='$(CFLAG)' 			\
+		AS='$(CC)' ASFLAG='$(CFLAG) -c'			\
+		AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)'	\
+		RC='$(RC)'              			\
+		CROSS_COMPILE='$(CROSS_COMPILE)'	\
+		PERL='$(PERL)' ENGDIRS='$(ENGDIRS)'		\
+		SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/$(LIBDIR)'	\
+		INSTALL_PREFIX='$(INSTALL_PREFIX)'		\
+		INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)'	\
+		LIBDIR='$(LIBDIR)'				\
+		MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD $(MAKEDEPPROG)' \
+		DEPFLAG='-DOPENSSL_NO_DEPRECATED $(DEPFLAG)'	\
+		MAKEDEPPROG='$(MAKEDEPPROG)'			\
+		SHARED_LDFLAGS='$(SHARED_LDFLAGS)'		\
+		KRB5_INCLUDES='$(KRB5_INCLUDES)' LIBKRB5='$(LIBKRB5)'	\
+		ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)'	\
+		EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)'	\
+		SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)'	\
+		PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)'	\
+		CPUID_OBJ='$(CPUID_OBJ)' BN_ASM='$(BN_ASM)'	\
+		EC_ASM='$(EC_ASM)' DES_ENC='$(DES_ENC)' 	\
+		AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)'	\
+		BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)'	\
+		RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)'	\
+		SHA1_ASM_OBJ='$(SHA1_ASM_OBJ)'			\
+		MD5_ASM_OBJ='$(MD5_ASM_OBJ)'			\
+		RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)'		\
+		WP_ASM_OBJ='$(WP_ASM_OBJ)'			\
+		MODES_ASM_OBJ='$(MODES_ASM_OBJ)'		\
+		ENGINES_ASM_OBJ='$(ENGINES_ASM_OBJ)'		\
+		PERLASM_SCHEME='$(PERLASM_SCHEME)'		\
+		FIPSLIBDIR='${FIPSLIBDIR}'			\
+		FIPSDIR='${FIPSDIR}'				\
+		FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}"	\
+		THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
+# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
+# which in turn eliminates ambiguities in variable treatment with -e.
+
+# BUILD_CMD is a generic macro to build a given target in a given
+# subdirectory.  The target must be given through the shell variable
+# `target' and the subdirectory to build in must be given through `dir'.
+# This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or
+# BUILD_ONE_CMD instead.
+#
+# BUILD_ONE_CMD is a macro to build a given target in a given
+# subdirectory if that subdirectory is part of $(DIRS).  It requires
+# exactly the same shell variables as BUILD_CMD.
+#
+# RECURSIVE_BUILD_CMD is a macro to build a given target in all
+# subdirectories defined in $(DIRS).  It requires that the target
+# is given through the shell variable `target'.
+BUILD_CMD=  if [ -d "$$dir" ]; then \
+	    (	cd $$dir && echo "making $$target in $$dir..." && \
+		$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
+	    ) || exit 1; \
+	    fi
+RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
+BUILD_ONE_CMD=\
+	if expr " $(DIRS) " : ".* $$dir " >/dev/null 2>&1; then \
+		$(BUILD_CMD); \
+	fi
+
+reflect:
+	@[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
+
+sub_all: build_all
+
+build_all: build_libs build_apps build_tests build_tools
+
+build_libs: build_libcrypto build_libssl openssl.pc
+
+build_libcrypto: build_crypto build_engines libcrypto.pc
+build_libssl: build_ssl libssl.pc
+
+build_crypto:
+	@dir=crypto; target=all; $(BUILD_ONE_CMD)
+build_ssl: build_crypto
+	@dir=ssl; target=all; $(BUILD_ONE_CMD)
+build_engines: build_crypto
+	@dir=engines; target=all; $(BUILD_ONE_CMD)
+build_apps: build_libs
+	@dir=apps; target=all; $(BUILD_ONE_CMD)
+build_tests: build_libs
+	@dir=test; target=all; $(BUILD_ONE_CMD)
+build_tools: build_libs
+	@dir=tools; target=all; $(BUILD_ONE_CMD)
+
+all_testapps: build_libs build_testapps
+build_testapps:
+	@dir=crypto; target=testapps; $(BUILD_ONE_CMD)
+
+fips_premain_dso$(EXE_EXT): libcrypto.a
+	[ -z "$(FIPSCANLIB)" ] || $(CC) $(CFLAG) -Iinclude \
+		-DFINGERPRINT_PREMAIN_DSO_LOAD -o $@  \
+		$(FIPSLIBDIR)fips_premain.c $(FIPSLIBDIR)fipscanister.o \
+		libcrypto.a $(EX_LIBS)
+
+libcrypto$(SHLIB_EXT): libcrypto.a fips_premain_dso$(EXE_EXT)
+	@if [ "$(SHLIB_TARGET)" != "" ]; then \
+		if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
+			FIPSLD_LIBCRYPTO=libcrypto.a ; \
+			FIPSLD_CC="$(CC)"; CC=$(FIPSDIR)/bin/fipsld; \
+			export CC FIPSLD_CC FIPSLD_LIBCRYPTO; \
+		fi; \
+		$(MAKE) -e SHLIBDIRS=crypto build-shared; \
+	else \
+		echo "There's no support for shared libraries on this platform" >&2; \
+		exit 1; \
+	fi
+
+libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
+	@if [ "$(SHLIB_TARGET)" != "" ]; then \
+		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \
+	else \
+		echo "There's no support for shared libraries on this platform" >&2; \
+		exit 1; \
+	fi
+
+clean-shared:
+	@set -e; for i in $(SHLIBDIRS); do \
+		if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
+			tmp="$(SHARED_LIBS_LINK_EXTS)"; \
+			for j in $${tmp:-x}; do \
+				( set -x; rm -f lib$$i$$j ); \
+			done; \
+		fi; \
+		( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
+		if expr "$(PLATFORM)" : "Cygwin" >/dev/null; then \
+			( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
+		fi; \
+	done
+
+link-shared:
+	@ set -e; for i in $(SHLIBDIRS); do \
+		$(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
+			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
+			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
+			symlink.$(SHLIB_TARGET); \
+		libs="$$libs -l$$i"; \
+	done
+
+build-shared: do_$(SHLIB_TARGET) link-shared
+
+do_$(SHLIB_TARGET):
+	@ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \
+		if [ "$$i" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
+		$(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
+			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
+			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
+			LIBDEPS="$$libs $(EX_LIBS)" \
+			link_a.$(SHLIB_TARGET); \
+		libs="-l$$i $$libs"; \
+	done
+
+libcrypto.pc: Makefile
+	@ ( echo 'prefix=$(INSTALLTOP)'; \
+	    echo 'exec_prefix=$${prefix}'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
+	    echo 'includedir=$${prefix}/include'; \
+	    echo 'enginesdir=$${libdir}/engines'; \
+	    echo ''; \
+	    echo 'Name: OpenSSL-libcrypto'; \
+	    echo 'Description: OpenSSL cryptography library'; \
+	    echo 'Version: '$(VERSION); \
+	    echo 'Requires: '; \
+	    echo 'Libs: -L$${libdir} -lcrypto'; \
+	    echo 'Libs.private: $(EX_LIBS)'; \
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
+
+libssl.pc: Makefile
+	@ ( echo 'prefix=$(INSTALLTOP)'; \
+	    echo 'exec_prefix=$${prefix}'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
+	    echo 'includedir=$${prefix}/include'; \
+	    echo ''; \
+	    echo 'Name: OpenSSL-libssl'; \
+	    echo 'Description: Secure Sockets Layer and cryptography libraries'; \
+	    echo 'Version: '$(VERSION); \
+	    echo 'Requires.private: libcrypto'; \
+	    echo 'Libs: -L$${libdir} -lssl'; \
+	    echo 'Libs.private: $(EX_LIBS)'; \
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
+
+openssl.pc: Makefile
+	@ ( echo 'prefix=$(INSTALLTOP)'; \
+	    echo 'exec_prefix=$${prefix}'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
+	    echo 'includedir=$${prefix}/include'; \
+	    echo ''; \
+	    echo 'Name: OpenSSL'; \
+	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
+	    echo 'Version: '$(VERSION); \
+	    echo 'Requires: libssl libcrypto' ) > openssl.pc
+
+Makefile: Makefile.org Configure config
+	@echo "Makefile is older than Makefile.org, Configure or config."
+	@echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
+	@false
+
+libclean:
+	rm -f *.map *.so *.so.* *.dylib *.dll engines/*.so engines/*.dll engines/*.dylib *.a engines/*.a */lib */*/lib
+
+clean:	libclean
+	rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
+	@set -e; target=clean; $(RECURSIVE_BUILD_CMD)
+	rm -f $(LIBS)
+	rm -f openssl.pc libssl.pc libcrypto.pc
+	rm -f speed.* .pure
+	rm -f $(TARFILE)
+	@set -e; for i in $(ONEDIRS) ;\
+	do \
+	rm -fr $$i/*; \
+	done
+
+distclean: clean
+	-$(RM) `find . -name .git -prune -o -type l -print`
+	$(RM) apps/CA.pl
+	$(RM) test/evptests.txt test/newkey.pem test/testkey.pem test/testreq.pem
+	$(RM) tools/c_rehash
+	$(RM) crypto/opensslconf.h
+	$(RM) Makefile Makefile.bak
+
+makefile.one: files
+	$(PERL) util/mk1mf.pl >makefile.one; \
+	sh util/do_ms.sh
+
+files:
+	$(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
+	@set -e; target=files; $(RECURSIVE_BUILD_CMD)
+
+links:
+	@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
+	@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
+	@set -e; target=links; $(RECURSIVE_BUILD_CMD)
+
+gentests:
+	@(cd test && echo "generating dummy tests (if needed)..." && \
+	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate );
+
+dclean:
+	rm -rf *.bak include/openssl certs/.0
+	@set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
+
+rehash: rehash.time
+rehash.time: certs apps
+	@if [ -z "$(CROSS_COMPILE)" ]; then \
+		(OPENSSL="`pwd`/util/opensslwrap.sh"; \
+		[ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
+		OPENSSL_DEBUG_MEMORY=on; \
+		export OPENSSL OPENSSL_DEBUG_MEMORY; \
+		$(PERL) tools/c_rehash certs/demo) && \
+		touch rehash.time; \
+	else :; fi
+
+test:   tests
+
+tests: rehash
+	@(cd test && echo "testing..." && \
+	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on OPENSSL_CONF=../apps/openssl.cnf tests );
+	OPENSSL_CONF=apps/openssl.cnf util/opensslwrap.sh version -a
+
+report:
+	@$(PERL) util/selftest.pl
+
+update: errors stacks util/libeay.num util/ssleay.num TABLE
+	@set -e; target=update; $(RECURSIVE_BUILD_CMD)
+
+depend:
+	@set -e; target=depend; $(RECURSIVE_BUILD_CMD)
+
+lint:
+	@set -e; target=lint; $(RECURSIVE_BUILD_CMD)
+
+tags:
+	rm -f TAGS
+	find . -name '[^.]*.[ch]' | xargs etags -a
+
+errors:
+	$(PERL) util/ck_errf.pl -strict */*.c */*/*.c
+	$(PERL) util/mkerr.pl -recurse -write
+	(cd engines; $(MAKE) PERL=$(PERL) errors)
+
+stacks:
+	$(PERL) util/mkstack.pl -write
+
+util/libeay.num::
+	$(PERL) util/mkdef.pl crypto update
+
+util/ssleay.num::
+	$(PERL) util/mkdef.pl ssl update
+
+TABLE: Configure
+	(echo 'Output of `Configure TABLE'"':"; \
+	$(PERL) Configure TABLE) > TABLE
+
+# Build distribution tar-file. As the list of files returned by "find" is
+# pretty long, on several platforms a "too many arguments" error or similar
+# would occur. Therefore the list of files is temporarily stored into a file
+# and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
+# tar does not support the --files-from option.
+TAR_COMMAND=$(TAR) $(TARFLAGS) --files-from $(TARFILE).list \
+	                       --owner 0 --group 0 \
+			       --transform 's|^|$(NAME)/|' \
+			       -cvf -
+
+$(TARFILE).list:
+	find * \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \
+	       \! -name '*.so' \! -name '*.so.*'  \! -name 'openssl' \
+	       \( \! -name '*test' -o -name bctest -o -name pod2mantest \) \
+	       \! -name '.#*' \! -name '*.bak' \! -name '*~' \! -type l \
+	    | sort > $(TARFILE).list
+
+tar: $(TARFILE).list
+	find . -type d -print | xargs chmod 755
+	find . -type f -print | xargs chmod a+r
+	find . -type f -perm -0100 -print | xargs chmod a+x
+	$(TAR_COMMAND) | gzip --best > $(TARFILE).gz
+	rm -f $(TARFILE).list
+	ls -l $(TARFILE).gz
+
+tar-snap: $(TARFILE).list
+	$(TAR_COMMAND) > $(TARFILE)
+	rm -f $(TARFILE).list
+	ls -l $(TARFILE)
+
+dist:   
+	$(PERL) Configure dist
+	@$(MAKE) SDIRS='$(SDIRS)' clean
+	@$(MAKE) TAR='$(TAR)' TARFLAGS='$(TARFLAGS)' $(DISTTARVARS) tar
+
+install: all install_docs install_sw
+
+install_sw:
+	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR) \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
+		$(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
+		$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
+		$(INSTALL_PREFIX)$(OPENSSLDIR)/private
+	@set -e; headerlist="$(EXHEADER)"; for i in $$headerlist;\
+	do \
+	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
+	done;
+	@set -e; target=install; $(RECURSIVE_BUILD_CMD)
+	@set -e; liblist="$(LIBS)"; for i in $$liblist ;\
+	do \
+		if [ -f "$$i" ]; then \
+		(       echo installing $$i; \
+			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i ); \
+		fi; \
+	done;
+	@set -e; if [ -n "$(SHARED_LIBS)" ]; then \
+		tmp="$(SHARED_LIBS)"; \
+		for i in $${tmp:-x}; \
+		do \
+			if [ -f "$$i" -o -f "$$i.a" ]; then \
+			(       echo installing $$i; \
+				if expr "$(PLATFORM)" : "Cygwin" >/dev/null; then \
+					c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
+					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
+					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
+				else \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
+				fi ); \
+				if expr $(PLATFORM) : 'mingw' > /dev/null; then \
+				(	case $$i in \
+						*crypto*) i=libeay32.dll;; \
+						*ssl*)    i=ssleay32.dll;; \
+					esac; \
+					echo installing $$i; \
+	 				cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 				chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 				mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
+				fi; \
+			fi; \
+		done; \
+		(	here="`pwd`"; \
+			cd $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR); \
+			$(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
+		if [ "$(INSTALLTOP)" != "/usr" ]; then \
+			echo 'OpenSSL shared libraries have been installed in:'; \
+			echo '  $(INSTALLTOP)'; \
+			echo ''; \
+			sed -e '1,/^$$/d' doc/openssl-shared.txt; \
+		fi; \
+	fi
+	cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
+	cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
+	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
+
+install_html_docs:
+	here="`pwd`"; \
+	filecase=; \
+	case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
+		filecase=-i; \
+	esac; \
+	for subdir in apps crypto ssl; do \
+		mkdir -p $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
+		for i in doc/$$subdir/*.pod; do \
+			fn=`basename $$i .pod`; \
+			echo "installing html/$$fn.$(HTMLSUFFIX)"; \
+			cat $$i \
+			| sed -r 's/L<([^)]*)(\([0-9]\))?\|([^)]*)(\([0-9]\))?>/L<\1|\3>/g' \
+			| pod2html --podroot=doc --htmlroot=.. --podpath=apps:crypto:ssl \
+			| sed -r 's/<!DOCTYPE.*//g' \
+			> $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
+			$(PERL) util/extract-names.pl < $$i | \
+				grep -v $$filecase "^$$fn\$$" | \
+				(cd $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
+				 while read n; do \
+					PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$(HTMLSUFFIX) "$$n".$(HTMLSUFFIX); \
+				 done); \
+		done; \
+	done
+
+install_docs:
+	@$(PERL) $(TOP)/util/mkdir-p.pl \
+		$(INSTALL_PREFIX)$(MANDIR)/man1 \
+		$(INSTALL_PREFIX)$(MANDIR)/man3 \
+		$(INSTALL_PREFIX)$(MANDIR)/man5 \
+		$(INSTALL_PREFIX)$(MANDIR)/man7
+	@pod2man="`cd ./util; ./pod2mantest $(PERL)`"; \
+	here="`pwd`"; \
+	filecase=; \
+	case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
+		filecase=-i; \
+	esac; \
+	set -e; for i in doc/apps/*.pod; do \
+		fn=`basename $$i .pod`; \
+		sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
+		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
+		(cd `$(PERL) util/dirname.pl $$i`; \
+		sh -c "$$pod2man \
+			--section=$$sec --center=OpenSSL \
+			--release=$(VERSION) `basename $$i`") \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+		$(PERL) util/extract-names.pl < $$i | \
+			(grep -v $$filecase "^$$fn\$$"; true) | \
+			(grep -v "[	]"; true) | \
+			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+			 while read n; do \
+				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+			 done); \
+	done; \
+	set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
+		fn=`basename $$i .pod`; \
+		sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
+		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
+		(cd `$(PERL) util/dirname.pl $$i`; \
+		sh -c "$$pod2man \
+			--section=$$sec --center=OpenSSL \
+			--release=$(VERSION) `basename $$i`") \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+		$(PERL) util/extract-names.pl < $$i | \
+			(grep -v $$filecase "^$$fn\$$"; true) | \
+			(grep -v "[	]"; true) | \
+			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+			 while read n; do \
+				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+			 done); \
+	done
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
Index: openssl-1.0.2u-new/Makefile.org
===================================================================
--- openssl-1.0.2u-new/Makefile.org	(nonexistent)
+++ openssl-1.0.2u-new/Makefile.org	(revision 5)
@@ -0,0 +1,689 @@
+##
+## Makefile for OpenSSL
+##
+
+VERSION=
+MAJOR=
+MINOR=
+SHLIB_VERSION_NUMBER=
+SHLIB_VERSION_HISTORY=
+SHLIB_MAJOR=
+SHLIB_MINOR=
+SHLIB_EXT=
+PLATFORM=dist
+OPTIONS=
+CONFIGURE_ARGS=
+SHLIB_TARGET=
+
+# HERE indicates where this Makefile lives.  This can be used to indicate
+# where sub-Makefiles are expected to be.  Currently has very limited usage,
+# and should probably not be bothered with at all.
+HERE=.
+
+# INSTALL_PREFIX is for package builders so that they can configure
+# for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
+# Normally it is left empty.
+INSTALL_PREFIX=
+INSTALLTOP=/usr/local/ssl
+
+# Do not edit this manually. Use Configure --openssldir=DIR do change this!
+OPENSSLDIR=/usr/local/ssl
+
+# NO_IDEA - Define to build without the IDEA algorithm
+# NO_RC4  - Define to build without the RC4 algorithm
+# NO_RC2  - Define to build without the RC2 algorithm
+# THREADS - Define when building with threads, you will probably also need any
+#           system defines as well, i.e. _REENTERANT for Solaris 2.[34]
+# TERMIO  - Define the termio terminal subsystem, needed if sgtty is missing.
+# TERMIOS - Define the termios terminal subsystem, Silicon Graphics.
+# LONGCRYPT - Define to use HPUX 10.x's long password modification to crypt(3).
+# DEVRANDOM - Give this the value of the 'random device' if your OS supports
+#           one.  32 bytes will be read from this when the random
+#           number generator is initalised.
+# SSL_FORBID_ENULL - define if you want the server to be not able to use the
+#           NULL encryption ciphers.
+#
+# LOCK_DEBUG - turns on lots of lock debug output :-)
+# REF_CHECK - turn on some xyz_free() assertions.
+# REF_PRINT - prints some stuff on structure free.
+# CRYPTO_MDEBUG - turns on my 'memory leak' detecting stuff
+# MFUNC - Make all Malloc/Free/Realloc calls call
+#       CRYPTO_malloc/CRYPTO_free/CRYPTO_realloc which can be setup to
+#       call application defined callbacks via CRYPTO_set_mem_functions()
+# MD5_ASM needs to be defined to use the x86 assembler for MD5
+# SHA1_ASM needs to be defined to use the x86 assembler for SHA1
+# RMD160_ASM needs to be defined to use the x86 assembler for RIPEMD160
+# Do not define B_ENDIAN or L_ENDIAN if 'unsigned long' == 8.  It must
+# equal 4.
+# PKCS1_CHECK - pkcs1 tests.
+
+CC= cc
+CFLAG= -O
+DEPFLAG= 
+PEX_LIBS= 
+EX_LIBS= 
+EXE_EXT= 
+ARFLAGS=
+AR=ar $(ARFLAGS) r
+RANLIB= ranlib
+RC= windres
+NM= nm
+PERL= perl
+TAR= tar
+TARFLAGS= --no-recursion
+MAKEDEPPROG=makedepend
+LIBDIR=lib
+
+# We let the C compiler driver to take care of .s files. This is done in
+# order to be excused from maintaining a separate set of architecture
+# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
+# gcc, then the driver will automatically translate it to -xarch=v8plus
+# and pass it down to assembler.
+AS=$(CC) -c
+ASFLAG=$(CFLAG)
+
+# For x86 assembler: Set PROCESSOR to 386 if you want to support
+# the 80386.
+PROCESSOR=
+
+# CPUID module collects small commonly used assembler snippets
+CPUID_OBJ= 
+BN_ASM= bn_asm.o
+EC_ASM=
+DES_ENC= des_enc.o fcrypt_b.o
+AES_ENC= aes_core.o aes_cbc.o
+BF_ENC= bf_enc.o
+CAST_ENC= c_enc.o
+RC4_ENC= rc4_enc.o
+RC5_ENC= rc5_enc.o
+MD5_ASM_OBJ= 
+SHA1_ASM_OBJ= 
+RMD160_ASM_OBJ= 
+WP_ASM_OBJ=
+CMLL_ENC=
+MODES_ASM_OBJ=
+ENGINES_ASM_OBJ=
+PERLASM_SCHEME=
+
+# KRB5 stuff
+KRB5_INCLUDES=
+LIBKRB5=
+
+# Zlib stuff
+ZLIB_INCLUDE=
+LIBZLIB=
+
+# TOP level FIPS install directory.
+FIPSDIR=
+
+# This is the location of fipscanister.o and friends.
+# The FIPS module build will place it $(INSTALLTOP)/lib
+# but since $(INSTALLTOP) can only take the default value
+# when the module is built it will be in /usr/local/ssl/lib
+# $(INSTALLTOP) for this build may be different so hard
+# code the path.
+
+FIPSLIBDIR=
+
+# The location of the library which contains fipscanister.o
+# normally it will be libcrypto unless fipsdso is set in which
+# case it will be libfips. If not compiling in FIPS mode at all
+# this is empty making it a useful test for a FIPS compile.
+
+FIPSCANLIB=
+
+# Shared library base address. Currently only used on Windows.
+#
+
+BASEADDR=
+
+DIRS=   crypto ssl engines apps test tools
+ENGDIRS= ccgost
+SHLIBDIRS= crypto ssl
+
+# dirs in crypto to build
+SDIRS=  \
+	objects \
+	md2 md4 md5 sha mdc2 hmac ripemd whrlpool \
+	des aes rc2 rc4 rc5 idea bf cast camellia seed modes \
+	bn ec rsa dsa ecdsa dh ecdh dso engine \
+	buffer bio stack lhash rand err \
+	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
+	cms pqueue ts jpake srp store cmac
+# keep in mind that the above list is adjusted by ./Configure
+# according to no-xxx arguments...
+
+# tests to perform.  "alltests" is a special word indicating that all tests
+# should be performed.
+TESTS = alltests
+
+MAKEFILE= Makefile
+
+MANDIR=$(OPENSSLDIR)/man
+MAN1=1
+MAN3=3
+MANSUFFIX=
+HTMLSUFFIX=html
+HTMLDIR=$(OPENSSLDIR)/html
+SHELL=/bin/sh
+
+TOP=    .
+ONEDIRS=out tmp
+EDIRS=  times doc bugs util include certs ms shlib mt demos perl sf dep VMS
+WDIRS=  windows
+LIBS=   libcrypto.a libssl.a
+SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
+SHARED_SSL=libssl$(SHLIB_EXT)
+SHARED_LIBS=
+SHARED_LIBS_LINK_EXTS=
+SHARED_LDFLAGS=
+
+GENERAL=        Makefile
+BASENAME=       openssl
+NAME=           $(BASENAME)-$(VERSION)
+TARFILE=        ../$(NAME).tar
+EXHEADER=       e_os2.h
+HEADER=         e_os.h
+
+all: Makefile build_all
+
+# as we stick to -e, CLEARENV ensures that local variables in lower
+# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
+# shell, which [annoyingly enough] terminates unset with error if VAR
+# is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh,
+# which terminates unset with error if no variable was present:-(
+CLEARENV=	TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}	\
+		$${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES}	\
+		$${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC}		\
+		$${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL}	\
+		$${EXHEADER+EXHEADER} $${HEADER+HEADER}		\
+		$${GENERAL+GENERAL} $${CFLAGS+CFLAGS}		\
+		$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS}		\
+		$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS}	\
+		$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS}	\
+		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}	\
+		$${APPS+APPS}
+
+# LC_ALL=C ensures that error [and other] messages are delivered in
+# same language for uniform treatment.
+BUILDENV=	LC_ALL=C PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)'\
+		CC='$(CC)' CFLAG='$(CFLAG)' 			\
+		AS='$(CC)' ASFLAG='$(CFLAG) -c'			\
+		AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)'	\
+		RC='$(RC)'              			\
+		CROSS_COMPILE='$(CROSS_COMPILE)'	\
+		PERL='$(PERL)' ENGDIRS='$(ENGDIRS)'		\
+		SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/$(LIBDIR)'	\
+		INSTALL_PREFIX='$(INSTALL_PREFIX)'		\
+		INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)'	\
+		LIBDIR='$(LIBDIR)'				\
+		MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD $(MAKEDEPPROG)' \
+		DEPFLAG='-DOPENSSL_NO_DEPRECATED $(DEPFLAG)'	\
+		MAKEDEPPROG='$(MAKEDEPPROG)'			\
+		SHARED_LDFLAGS='$(SHARED_LDFLAGS)'		\
+		KRB5_INCLUDES='$(KRB5_INCLUDES)' LIBKRB5='$(LIBKRB5)'	\
+		ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)'	\
+		EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)'	\
+		SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)'	\
+		PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)'	\
+		CPUID_OBJ='$(CPUID_OBJ)' BN_ASM='$(BN_ASM)'	\
+		EC_ASM='$(EC_ASM)' DES_ENC='$(DES_ENC)' 	\
+		AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)'	\
+		BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)'	\
+		RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)'	\
+		SHA1_ASM_OBJ='$(SHA1_ASM_OBJ)'			\
+		MD5_ASM_OBJ='$(MD5_ASM_OBJ)'			\
+		RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)'		\
+		WP_ASM_OBJ='$(WP_ASM_OBJ)'			\
+		MODES_ASM_OBJ='$(MODES_ASM_OBJ)'		\
+		ENGINES_ASM_OBJ='$(ENGINES_ASM_OBJ)'		\
+		PERLASM_SCHEME='$(PERLASM_SCHEME)'		\
+		FIPSLIBDIR='${FIPSLIBDIR}'			\
+		FIPSDIR='${FIPSDIR}'				\
+		FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}"	\
+		THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
+# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
+# which in turn eliminates ambiguities in variable treatment with -e.
+
+# BUILD_CMD is a generic macro to build a given target in a given
+# subdirectory.  The target must be given through the shell variable
+# `target' and the subdirectory to build in must be given through `dir'.
+# This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or
+# BUILD_ONE_CMD instead.
+#
+# BUILD_ONE_CMD is a macro to build a given target in a given
+# subdirectory if that subdirectory is part of $(DIRS).  It requires
+# exactly the same shell variables as BUILD_CMD.
+#
+# RECURSIVE_BUILD_CMD is a macro to build a given target in all
+# subdirectories defined in $(DIRS).  It requires that the target
+# is given through the shell variable `target'.
+BUILD_CMD=  if [ -d "$$dir" ]; then \
+	    (	cd $$dir && echo "making $$target in $$dir..." && \
+		$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
+	    ) || exit 1; \
+	    fi
+RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
+BUILD_ONE_CMD=\
+	if expr " $(DIRS) " : ".* $$dir " >/dev/null 2>&1; then \
+		$(BUILD_CMD); \
+	fi
+
+reflect:
+	@[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
+
+sub_all: build_all
+
+build_all: build_libs build_apps build_tests build_tools
+
+build_libs: build_libcrypto build_libssl openssl.pc
+
+build_libcrypto: build_crypto build_engines libcrypto.pc
+build_libssl: build_ssl libssl.pc
+
+build_crypto:
+	@dir=crypto; target=all; $(BUILD_ONE_CMD)
+build_ssl: build_crypto
+	@dir=ssl; target=all; $(BUILD_ONE_CMD)
+build_engines: build_crypto
+	@dir=engines; target=all; $(BUILD_ONE_CMD)
+build_apps: build_libs
+	@dir=apps; target=all; $(BUILD_ONE_CMD)
+build_tests: build_libs
+	@dir=test; target=all; $(BUILD_ONE_CMD)
+build_tools: build_libs
+	@dir=tools; target=all; $(BUILD_ONE_CMD)
+
+all_testapps: build_libs build_testapps
+build_testapps:
+	@dir=crypto; target=testapps; $(BUILD_ONE_CMD)
+
+fips_premain_dso$(EXE_EXT): libcrypto.a
+	[ -z "$(FIPSCANLIB)" ] || $(CC) $(CFLAG) -Iinclude \
+		-DFINGERPRINT_PREMAIN_DSO_LOAD -o $@  \
+		$(FIPSLIBDIR)fips_premain.c $(FIPSLIBDIR)fipscanister.o \
+		libcrypto.a $(EX_LIBS)
+
+libcrypto$(SHLIB_EXT): libcrypto.a fips_premain_dso$(EXE_EXT)
+	@if [ "$(SHLIB_TARGET)" != "" ]; then \
+		if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
+			FIPSLD_LIBCRYPTO=libcrypto.a ; \
+			FIPSLD_CC="$(CC)"; CC=$(FIPSDIR)/bin/fipsld; \
+			export CC FIPSLD_CC FIPSLD_LIBCRYPTO; \
+		fi; \
+		$(MAKE) -e SHLIBDIRS=crypto build-shared; \
+	else \
+		echo "There's no support for shared libraries on this platform" >&2; \
+		exit 1; \
+	fi
+
+libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
+	@if [ "$(SHLIB_TARGET)" != "" ]; then \
+		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \
+	else \
+		echo "There's no support for shared libraries on this platform" >&2; \
+		exit 1; \
+	fi
+
+clean-shared:
+	@set -e; for i in $(SHLIBDIRS); do \
+		if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
+			tmp="$(SHARED_LIBS_LINK_EXTS)"; \
+			for j in $${tmp:-x}; do \
+				( set -x; rm -f lib$$i$$j ); \
+			done; \
+		fi; \
+		( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
+		if expr "$(PLATFORM)" : "Cygwin" >/dev/null; then \
+			( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
+		fi; \
+	done
+
+link-shared:
+	@ set -e; for i in $(SHLIBDIRS); do \
+		$(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
+			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
+			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
+			symlink.$(SHLIB_TARGET); \
+		libs="$$libs -l$$i"; \
+	done
+
+build-shared: do_$(SHLIB_TARGET) link-shared
+
+do_$(SHLIB_TARGET):
+	@ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \
+		if [ "$$i" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
+		$(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
+			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
+			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
+			LIBDEPS="$$libs $(EX_LIBS)" \
+			link_a.$(SHLIB_TARGET); \
+		libs="-l$$i $$libs"; \
+	done
+
+libcrypto.pc: Makefile
+	@ ( echo 'prefix=$(INSTALLTOP)'; \
+	    echo 'exec_prefix=$${prefix}'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
+	    echo 'includedir=$${prefix}/include'; \
+	    echo 'enginesdir=$${libdir}/engines'; \
+	    echo ''; \
+	    echo 'Name: OpenSSL-libcrypto'; \
+	    echo 'Description: OpenSSL cryptography library'; \
+	    echo 'Version: '$(VERSION); \
+	    echo 'Requires: '; \
+	    echo 'Libs: -L$${libdir} -lcrypto'; \
+	    echo 'Libs.private: $(EX_LIBS)'; \
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
+
+libssl.pc: Makefile
+	@ ( echo 'prefix=$(INSTALLTOP)'; \
+	    echo 'exec_prefix=$${prefix}'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
+	    echo 'includedir=$${prefix}/include'; \
+	    echo ''; \
+	    echo 'Name: OpenSSL-libssl'; \
+	    echo 'Description: Secure Sockets Layer and cryptography libraries'; \
+	    echo 'Version: '$(VERSION); \
+	    echo 'Requires.private: libcrypto'; \
+	    echo 'Libs: -L$${libdir} -lssl'; \
+	    echo 'Libs.private: $(EX_LIBS)'; \
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
+
+openssl.pc: Makefile
+	@ ( echo 'prefix=$(INSTALLTOP)'; \
+	    echo 'exec_prefix=$${prefix}'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
+	    echo 'includedir=$${prefix}/include'; \
+	    echo ''; \
+	    echo 'Name: OpenSSL'; \
+	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
+	    echo 'Version: '$(VERSION); \
+	    echo 'Requires: libssl libcrypto' ) > openssl.pc
+
+Makefile: Makefile.org Configure config
+	@echo "Makefile is older than Makefile.org, Configure or config."
+	@echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
+	@false
+
+libclean:
+	rm -f *.map *.so *.so.* *.dylib *.dll engines/*.so engines/*.dll engines/*.dylib *.a engines/*.a */lib */*/lib
+
+clean:	libclean
+	rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
+	@set -e; target=clean; $(RECURSIVE_BUILD_CMD)
+	rm -f $(LIBS)
+	rm -f openssl.pc libssl.pc libcrypto.pc
+	rm -f speed.* .pure
+	rm -f $(TARFILE)
+	@set -e; for i in $(ONEDIRS) ;\
+	do \
+	rm -fr $$i/*; \
+	done
+
+distclean: clean
+	-$(RM) `find . -name .git -prune -o -type l -print`
+	$(RM) apps/CA.pl
+	$(RM) test/evptests.txt test/newkey.pem test/testkey.pem test/testreq.pem
+	$(RM) tools/c_rehash
+	$(RM) crypto/opensslconf.h
+	$(RM) Makefile Makefile.bak
+
+makefile.one: files
+	$(PERL) util/mk1mf.pl >makefile.one; \
+	sh util/do_ms.sh
+
+files:
+	$(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
+	@set -e; target=files; $(RECURSIVE_BUILD_CMD)
+
+links:
+	@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
+	@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
+	@set -e; target=links; $(RECURSIVE_BUILD_CMD)
+
+gentests:
+	@(cd test && echo "generating dummy tests (if needed)..." && \
+	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate );
+
+dclean:
+	rm -rf *.bak include/openssl certs/.0
+	@set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
+
+rehash: rehash.time
+rehash.time: certs apps
+	@if [ -z "$(CROSS_COMPILE)" ]; then \
+		(OPENSSL="`pwd`/util/opensslwrap.sh"; \
+		[ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
+		OPENSSL_DEBUG_MEMORY=on; \
+		export OPENSSL OPENSSL_DEBUG_MEMORY; \
+		$(PERL) tools/c_rehash certs/demo) && \
+		touch rehash.time; \
+	else :; fi
+
+test:   tests
+
+tests: rehash
+	@(cd test && echo "testing..." && \
+	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on OPENSSL_CONF=../apps/openssl.cnf tests );
+	OPENSSL_CONF=apps/openssl.cnf util/opensslwrap.sh version -a
+
+report:
+	@$(PERL) util/selftest.pl
+
+update: errors stacks util/libeay.num util/ssleay.num TABLE
+	@set -e; target=update; $(RECURSIVE_BUILD_CMD)
+
+depend:
+	@set -e; target=depend; $(RECURSIVE_BUILD_CMD)
+
+lint:
+	@set -e; target=lint; $(RECURSIVE_BUILD_CMD)
+
+tags:
+	rm -f TAGS
+	find . -name '[^.]*.[ch]' | xargs etags -a
+
+errors:
+	$(PERL) util/ck_errf.pl -strict */*.c */*/*.c
+	$(PERL) util/mkerr.pl -recurse -write
+	(cd engines; $(MAKE) PERL=$(PERL) errors)
+
+stacks:
+	$(PERL) util/mkstack.pl -write
+
+util/libeay.num::
+	$(PERL) util/mkdef.pl crypto update
+
+util/ssleay.num::
+	$(PERL) util/mkdef.pl ssl update
+
+TABLE: Configure
+	(echo 'Output of `Configure TABLE'"':"; \
+	$(PERL) Configure TABLE) > TABLE
+
+# Build distribution tar-file. As the list of files returned by "find" is
+# pretty long, on several platforms a "too many arguments" error or similar
+# would occur. Therefore the list of files is temporarily stored into a file
+# and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
+# tar does not support the --files-from option.
+TAR_COMMAND=$(TAR) $(TARFLAGS) --files-from $(TARFILE).list \
+	                       --owner 0 --group 0 \
+			       --transform 's|^|$(NAME)/|' \
+			       -cvf -
+
+$(TARFILE).list:
+	find * \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \
+	       \! -name '*.so' \! -name '*.so.*'  \! -name 'openssl' \
+	       \( \! -name '*test' -o -name bctest -o -name pod2mantest \) \
+	       \! -name '.#*' \! -name '*.bak' \! -name '*~' \! -type l \
+	    | sort > $(TARFILE).list
+
+tar: $(TARFILE).list
+	find . -type d -print | xargs chmod 755
+	find . -type f -print | xargs chmod a+r
+	find . -type f -perm -0100 -print | xargs chmod a+x
+	$(TAR_COMMAND) | gzip --best > $(TARFILE).gz
+	rm -f $(TARFILE).list
+	ls -l $(TARFILE).gz
+
+tar-snap: $(TARFILE).list
+	$(TAR_COMMAND) > $(TARFILE)
+	rm -f $(TARFILE).list
+	ls -l $(TARFILE)
+
+dist:   
+	$(PERL) Configure dist
+	@$(MAKE) SDIRS='$(SDIRS)' clean
+	@$(MAKE) TAR='$(TAR)' TARFLAGS='$(TARFLAGS)' $(DISTTARVARS) tar
+
+install: all install_docs install_sw
+
+install_sw:
+	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR) \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
+		$(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
+		$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
+		$(INSTALL_PREFIX)$(OPENSSLDIR)/private
+	@set -e; headerlist="$(EXHEADER)"; for i in $$headerlist;\
+	do \
+	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
+	done;
+	@set -e; target=install; $(RECURSIVE_BUILD_CMD)
+	@set -e; liblist="$(LIBS)"; for i in $$liblist ;\
+	do \
+		if [ -f "$$i" ]; then \
+		(       echo installing $$i; \
+			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i ); \
+		fi; \
+	done;
+	@set -e; if [ -n "$(SHARED_LIBS)" ]; then \
+		tmp="$(SHARED_LIBS)"; \
+		for i in $${tmp:-x}; \
+		do \
+			if [ -f "$$i" -o -f "$$i.a" ]; then \
+			(       echo installing $$i; \
+				if expr "$(PLATFORM)" : "Cygwin" >/dev/null; then \
+					c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
+					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
+					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
+				else \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
+				fi ); \
+				if expr $(PLATFORM) : 'mingw' > /dev/null; then \
+				(	case $$i in \
+						*crypto*) i=libeay32.dll;; \
+						*ssl*)    i=ssleay32.dll;; \
+					esac; \
+					echo installing $$i; \
+	 				cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 				chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 				mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
+				fi; \
+			fi; \
+		done; \
+		(	here="`pwd`"; \
+			cd $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR); \
+			$(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
+		if [ "$(INSTALLTOP)" != "/usr" ]; then \
+			echo 'OpenSSL shared libraries have been installed in:'; \
+			echo '  $(INSTALLTOP)'; \
+			echo ''; \
+			sed -e '1,/^$$/d' doc/openssl-shared.txt; \
+		fi; \
+	fi
+	cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
+	cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
+	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
+
+install_html_docs:
+	here="`pwd`"; \
+	filecase=; \
+	case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
+		filecase=-i; \
+	esac; \
+	for subdir in apps crypto ssl; do \
+		mkdir -p $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
+		for i in doc/$$subdir/*.pod; do \
+			fn=`basename $$i .pod`; \
+			echo "installing html/$$fn.$(HTMLSUFFIX)"; \
+			cat $$i \
+			| sed -r 's/L<([^)]*)(\([0-9]\))?\|([^)]*)(\([0-9]\))?>/L<\1|\3>/g' \
+			| pod2html --podroot=doc --htmlroot=.. --podpath=apps:crypto:ssl \
+			| sed -r 's/<!DOCTYPE.*//g' \
+			> $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
+			$(PERL) util/extract-names.pl < $$i | \
+				grep -v $$filecase "^$$fn\$$" | \
+				(cd $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
+				 while read n; do \
+					PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$(HTMLSUFFIX) "$$n".$(HTMLSUFFIX); \
+				 done); \
+		done; \
+	done
+
+install_docs:
+	@$(PERL) $(TOP)/util/mkdir-p.pl \
+		$(INSTALL_PREFIX)$(MANDIR)/man1 \
+		$(INSTALL_PREFIX)$(MANDIR)/man3 \
+		$(INSTALL_PREFIX)$(MANDIR)/man5 \
+		$(INSTALL_PREFIX)$(MANDIR)/man7
+	@pod2man="`cd ./util; ./pod2mantest $(PERL)`"; \
+	here="`pwd`"; \
+	filecase=; \
+	case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
+		filecase=-i; \
+	esac; \
+	set -e; for i in doc/apps/*.pod; do \
+		fn=`basename $$i .pod`; \
+		sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
+		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
+		(cd `$(PERL) util/dirname.pl $$i`; \
+		sh -c "$$pod2man \
+			--section=$$sec --center=OpenSSL \
+			--release=$(VERSION) `basename $$i`") \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+		$(PERL) util/extract-names.pl < $$i | \
+			(grep -v $$filecase "^$$fn\$$"; true) | \
+			(grep -v "[	]"; true) | \
+			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+			 while read n; do \
+				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+			 done); \
+	done; \
+	set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
+		fn=`basename $$i .pod`; \
+		sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
+		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
+		(cd `$(PERL) util/dirname.pl $$i`; \
+		sh -c "$$pod2man \
+			--section=$$sec --center=OpenSSL \
+			--release=$(VERSION) `basename $$i`") \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+		$(PERL) util/extract-names.pl < $$i | \
+			(grep -v $$filecase "^$$fn\$$"; true) | \
+			(grep -v "[	]"; true) | \
+			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+			 while read n; do \
+				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+			 done); \
+	done
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
Index: openssl-1.0.2u-new
===================================================================
--- openssl-1.0.2u-new	(nonexistent)
+++ openssl-1.0.2u-new	(revision 5)

Property changes on: openssl-1.0.2u-new
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: .
===================================================================
--- .	(nonexistent)
+++ .	(revision 5)

Property changes on: .
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~