Radix cross Linux

Index: create.patch.sh
===================================================================
--- create.patch.sh	(nonexistent)
+++ create.patch.sh	(revision 5)
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+VERSION=3.6.0
+
+tar --files-from=file.list -xJvf ../lm-sensors-$VERSION.tar.xz
+mv lm-sensors-$VERSION lm-sensors-$VERSION-orig
+
+cp -rf ./lm-sensors-$VERSION-new ./lm-sensors-$VERSION
+
+diff --unified -Nr  lm-sensors-$VERSION-orig  lm-sensors-$VERSION > lm-sensors-$VERSION-cross.patch
+
+mv lm-sensors-$VERSION-cross.patch ../patches
+
+rm -rf ./lm-sensors-$VERSION
+rm -rf ./lm-sensors-$VERSION-orig

Property changes on: create.patch.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: file.list
===================================================================
--- file.list	(nonexistent)
+++ file.list	(revision 5)
@@ -0,0 +1 @@
+lm-sensors-3.6.0/Makefile
Index: lm-sensors-3.6.0-new/Makefile
===================================================================
--- lm-sensors-3.6.0-new/Makefile	(nonexistent)
+++ lm-sensors-3.6.0-new/Makefile	(revision 5)
@@ -0,0 +1,287 @@
+#  Makefile - Makefile for a Linux module for reading sensor data.
+#  Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>
+#
+#  This program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+#  MA 02110-1301 USA.
+
+# Everything you may want to change is in the top of this file. Usually, you
+# can just use the defaults, fortunately.
+
+# You need a full complement of GNU utilities to run this Makefile
+# successfully; most notably, you need GNU make, flex (>= 2.5.1)
+# and bison.
+
+# Uncomment the second line if you are a developer. This will enable many
+# additional warnings at compile-time
+#WARN := 0
+WARN := 1
+
+# Uncomment the second line if you want to get (loads of) debug information
+# at run-time.
+# Not recommended, unless you are actually debugging the code
+DEBUG := 0
+#DEBUG := 1
+
+# Note that all the installation paths below can also be set on the make
+# command line (e.g. "make PREFIX=/usr").
+
+# If you want to install at some other place then at from which you will run
+# everything, set DESTDIR to the extra prefix.
+DESTDIR ?=
+
+# This is the prefix that will be used for almost all directories below.
+PREFIX ?= /usr
+
+# Your C compiler
+CC ?= gcc
+
+# This is the directory where sensors3.conf will be installed, if no other
+# configuration file is found
+ETCDIR ?= /etc
+
+# You should not need to change this. It is the directory into which the
+# library files (both static and shared) will be installed.
+LIBDIR ?= $(PREFIX)/lib
+
+EXLDFLAGS ?= -Wl,-rpath,$(LIBDIR)
+
+# You should not need to change this. It is the directory into which the
+# executable program files will be installed. BINDIR for programs that are
+# also useful for normal users, SBINDIR for programs that can only be run
+# by the superuser.
+# Note that not all programs in this package are really installed;
+# some are just examples. You can always install them by hand, of
+# course.
+BINDIR ?= $(PREFIX)/bin
+SBINDIR ?= $(PREFIX)/sbin
+
+# You should not need to change this. It is the basic directory into which
+# include files will be installed. The actual directory will be 
+# $(INCLUDEDIR)/sensors for library include files.
+INCLUDEDIR ?= $(PREFIX)/include
+LIBINCLUDEDIR ?= $(INCLUDEDIR)/sensors
+
+# You should not need to change this. It is the base directory under which the
+# manual pages will be installed.
+MANDIR ?= $(PREFIX)/man
+
+ARCH ?= $(firstword $(subst -, ,$(shell $(CC) -dumpmachine)))
+
+# Extra non-default programs to build; e.g., sensord
+#PROG_EXTRA := sensord
+
+# Build and install static library
+BUILD_STATIC_LIB := 1
+
+# Set these to add preprocessor or compiler flags, or use
+# environment variables
+# CFLAGS :=
+# CPPFLAGS :=
+
+##################################################
+# Below this, nothing should need to be changed. #
+##################################################
+
+# Note that this is a monolithic Makefile; it calls no sub-Makefiles,
+# but instead, it compiles everything right from here. Yes, there are
+# some distinct advantages to this; see the following paper for more info:
+#   http://www.tip.net.au/~millerp/rmch/recu-make-cons-harm.html
+# Note that is still uses Makefile fragments in sub-directories; these
+# are called 'Module.mk'.
+
+# Within each Module.mk, rules and dependencies can be added to targets
+# all, install and clean. Use double colons instead of single ones
+# to do this. 
+
+# The subdirectories we need to build things in 
+SRCDIRS := lib prog/detect prog/pwm \
+           prog/sensors ${PROG_EXTRA:%=prog/%} etc
+# Only build isadump and isaset on x86 machines.
+ifneq (,$(findstring $(ARCH), i386 i486 i586 i686 x86_64))
+SRCDIRS += prog/dump
+endif
+SRCDIRS += lib/test
+
+# Some often-used commands with default options
+MKDIR := mkdir -p
+RMDIR := rmdir
+RM := rm -f
+MV := mv -f
+BISON := bison
+FLEX := flex
+AR := ar
+INSTALL := install
+LN := ln -sf
+GREP := grep
+AWK := awk
+SED := sed
+
+# Determine the default compiler flags
+# Set CFLAGS or CPPFLAGS above to add your own flags to all.
+# ALLCPPFLAGS/ALLCFLAGS are common flags, plus any user-specified overrides from the environment or make command line.
+# PROGCPPFLAGS/PROGCFLAGS is to create regular object files (which are linked into executables).
+# ARCPPFLAGS/ARCFLAGS are used to create archive object files (static libraries).
+# LIBCPPFLAGS/LIBCFLAGS are for shared library objects.
+ALL_CPPFLAGS := -I.
+ALL_CFLAGS := -Wall
+
+ifeq ($(DEBUG),1)
+ALL_CPPFLAGS += -DDEBUG
+ALL_CFLAGS += -O -g
+else
+ALL_CFLAGS += -O2
+endif
+
+ifeq ($(WARN),1)
+ALL_CFLAGS += -Wstrict-prototypes -Wshadow -Wpointer-arith -Wcast-qual \
+            -Wcast-align -Wwrite-strings -Wnested-externs -Winline -W \
+            -Wmissing-prototypes -Wundef
+endif
+
+ALL_CPPFLAGS += $(CPPFLAGS)
+ALL_CFLAGS += $(CFLAGS)
+
+PROGCPPFLAGS := -DETCDIR="\"$(ETCDIR)\"" $(ALL_CPPFLAGS)
+PROGCFLAGS := $(ALL_CFLAGS)
+ARCPPFLAGS := -DETCDIR="\"$(ETCDIR)\"" $(ALL_CPPFLAGS)
+ARCFLAGS := $(ALL_CFLAGS)
+LIBCPPFLAGS := -DETCDIR="\"$(ETCDIR)\"" $(ALL_CPPFLAGS)
+LIBCFLAGS := -fpic -D_REENTRANT $(ALL_CFLAGS)
+
+.PHONY: all user clean install user_install uninstall user_uninstall
+
+# Make all the default rule
+all::
+
+# Include all makefiles for sub-modules
+INCLUDEFILES := 
+include $(patsubst %,%/Module.mk,$(SRCDIRS))
+ifneq ($(MAKECMDGOALS),clean)
+ifneq ($(MAKECMDGOALS),uninstall)
+ifneq ($(MAKECMDGOALS),user_uninstall)
+ifneq ($(MAKECMDGOALS),help)
+-include $(INCLUDEFILES)
+endif
+endif
+endif
+endif
+
+# Man pages
+MANPAGES := $(LIBMAN3FILES) $(LIBMAN5FILES) $(PROGDETECTMAN8FILES) $(PROGDUMPMAN8FILES) \
+            $(PROGSENSORSMAN1FILES) $(PROGPWMMAN8FILES) prog/sensord/sensord.8
+
+user ::
+user_install::
+	@echo "*** Important notes:"
+	@echo "***  * The libsensors configuration file ($(ETCDIR)/sensors3.conf) is never"
+	@echo "***    overwritten by our installation process, so that you won't lose"
+	@echo "***    your personal settings in that file. You still can get our latest"
+	@echo "***    default config file in etc/sensors.conf.default and manually copy"
+	@echo "***    it to $(ETCDIR)/sensors3.conf if you want. You will then want to"
+	@echo "***    edit it to fit your needs again."
+	@echo "***  * The format of $(ETCDIR)/sensors3.conf changed with lm-sensors 3.0.0."
+	@echo "***    If you have a custom configuration file using the old format, you"
+	@echo "***    can convert it using the sensors-conf-convert script. Otherwise just"
+	@echo "***    overwrite your old configuration file with the new default one."
+	@echo "***  * As of lm-sensors 3.1.0, the default configuration file only"
+	@echo "***    contains statements which do not depend on how chips are wired."
+	@echo "***    If you miss parts of the bigger configuration file that used to be"
+	@echo "***    the default, copy the relevant parts from etc/sensors.conf.eg to"
+	@echo "***    $(ETCDIR)/sensors3.conf."
+all :: user
+install :: all user_install
+
+clean::
+	$(RM) lm_sensors-* lex.backup
+
+user_uninstall::
+
+uninstall :: user_uninstall
+
+help:
+	@echo 'Make targets are:'
+	@echo '  all (default): build library and userspace programs'
+	@echo '  install: install library and userspace programs'
+	@echo '  uninstall: uninstall library and userspace programs'
+	@echo '  clean: cleanup'
+
+# Generate html man pages to be copied to the lm_sensors website.
+# This uses the man2html from here
+# http://ftp.math.utah.edu/pub/sgml/
+# which works directly from the nroff source
+manhtml:
+	$(MKDIR) html
+	cp $(MANPAGES) html
+	cd html ; \
+	export LOGNAME=sensors ; \
+	export HOSTNAME=hwmon.wiki.kernel.org ; \
+	man2html *.[1-8] ; \
+	$(RM) *.[1-8]
+
+# Here, we define all implicit rules we want to use.
+
+.SUFFIXES:
+
+# We need to create dependency files. Tricky. The sed rule puts dir/file.d and
+# dir/file.c in front of the dependency file rule.
+
+
+# .ro files are used for programs (as opposed to modules)
+%.ro: %.c
+	$(CC) $(PROGCPPFLAGS) $(PROGCFLAGS) -c $< -o $@
+
+%.rd: %.c
+	$(CC) -M -MG $(PROGCPPFLAGS) $(PROGCFLAGS) $< | \
+	$(SED) -e 's@^\(.*\)\.o:@$*.rd $*.ro: Makefile '`dirname $*.rd`/Module.mk' @' > $@
+
+
+# .ao files are used for static archives
+%.ao: %.c
+	$(CC) $(ARCPPFLAGS) $(ARCFLAGS) -c $< -o $@
+
+%.ad: %.c
+	$(CC) -M -MG $(ARCPPFLAGS) $(ARCFLAGS) $< | \
+	$(SED) -e 's@^\(.*\)\.o:@$*.ad $*.ao: Makefile '`dirname $*.ad`/Module.mk' @' > $@
+
+
+# .lo files are used for shared libraries
+%.lo: %.c
+	$(CC) $(LIBCPPFLAGS) $(LIBCFLAGS) -c $< -o $@
+
+%.ld: %.c
+	$(CC) -M -MG $(LIBCPPFLAGS) $(LIBCFLAGS) $< | \
+	$(SED) -e 's@^\(.*\)\.o:@$*.ld $*.lo: Makefile '`dirname $*.ld`/Module.mk' @' > $@
+
+
+# Flex and Bison
+%.c: %.y
+	@if ! which $(BISON) 2> /dev/null ; then \
+		echo "Please install $(BISON), then run \"make clean\" and try again" ; \
+		false ; \
+	fi
+	$(BISON) -p sensors_yy -d $< -o $@
+
+ifeq ($(DEBUG),1)
+FLEX_FLAGS := -Psensors_yy -t -b -Cfe -8
+else
+FLEX_FLAGS := -Psensors_yy -t -Cfe -8
+endif
+
+%.c: %.l
+	@if ! which $(FLEX) 2> /dev/null ; then \
+		echo "Please install $(FLEX), then run \"make clean\" and try again" ; \
+		false ; \
+	fi
+	$(FLEX) $(FLEX_FLAGS) $< > $@
Index: lm-sensors-3.6.0-new
===================================================================
--- lm-sensors-3.6.0-new	(nonexistent)
+++ lm-sensors-3.6.0-new	(revision 5)

Property changes on: lm-sensors-3.6.0-new
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: .
===================================================================
--- .	(nonexistent)
+++ .	(revision 5)

Property changes on: .
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~