Index: Makefile
===================================================================
--- Makefile (nonexistent)
+++ Makefile (revision 5)
@@ -0,0 +1,56 @@
+
+COMPONENT_TARGETS = $(HARDWARE_NOARCH)
+
+
+include ../../../../build-system/constants.mk
+
+
+url = $(DOWNLOAD_SERVER)/sources/packages/a/adjtimex
+
+version = 1.29
+pkgname = adjtimex
+suffix = tar.xz
+
+tarball = $(addsuffix .$(suffix), $(addprefix $(pkgname)-, $(version)))
+sha1s = $(addsuffix .sha1sum, $(tarball))
+
+patches = $(CURDIR)/patches/adjtimex-1.29.patch
+
+.NOTPARALLEL: $(patches)
+
+
+BUILD_TARGETS = $(tarball) $(patches) $(sha1s)
+
+
+include ../../../../build-system/core.mk
+
+
+.PHONY: download_clean
+
+
+$(tarball):
+ @echo -e "\n======= Downloading $(tarball) file =======" ; \
+ for tarball in $(tarball) ; do \
+ echo "$(url)/$$tarball" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & \
+ done ; wait
+
+$(sha1s): $(tarball)
+ @for sha in $@ ; do \
+ echo -e "\n======= Downloading '$$sha' signature =======\n" ; \
+ echo "$(url)/$$sha" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & wait %1 ; \
+ touch $$sha ; \
+ echo -e "\n======= Check the '$$sha' sha1sum =======\n" ; \
+ sha1sum --check $$sha ; ret="$$?" ; \
+ if [ "$$ret" == "1" ]; then \
+ echo -e "\n======= ERROR: Bad '$$sha' sha1sum =======\n" ; \
+ exit 1 ; \
+ fi ; \
+ done
+
+$(patches): $(sha1s)
+ @echo -e "\n======= Create Patches =======\n" ; \
+ ( cd create-1.29-patch ; ./create.patch.sh ) ; \
+ echo -e "\n"
+
+download_clean:
+ @rm -f $(tarball) $(sha1s) $(patches)
Index: create-1.29-patch/adjtimex-1.29-new/adjtimex.c
===================================================================
--- create-1.29-patch/adjtimex-1.29-new/adjtimex.c (nonexistent)
+++ create-1.29-patch/adjtimex-1.29-new/adjtimex.c (revision 5)
@@ -0,0 +1,2264 @@
+/*
+#define DEBUG
+
+ adjtimex - display or set the kernel time variables
+
+
+ AUTHORS
+ ssd at nevets.oau.org (Steven S. Dick)
+ jrvz at comcast.net (Jim Van Zandt)
+
+ TODO: review code controlled by DEBUG and possibly
+ change control to verbose flag.
+*/
+
+#define _GNU_SOURCE /* strptime is a GNU extension */
+
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <getopt.h>
+#include <mat.h>
+#include <math.h>
+#include <netdb.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <sys/types.h>
+#include <syscall.h>
+#include <time.h>
+#include <signal.h>
+#include <unistd.h>
+#include <utmp.h>
+#include <fcntl.h>
+#include <sys/ioctl.h>
+#include "config.h"
+#ifdef HAVE_LINUX_RTC_H
+#include <linux/rtc.h>
+#else
+struct rtc_time {
+ int tm_sec;
+ int tm_min;
+ int tm_hour;
+ int tm_mday;
+ int tm_mon;
+ int tm_year;
+ int tm_wday;
+ int tm_yday;
+ int tm_isdst;
+};
+#define RTC_UIE_ON _IO('p', 0x03) /* Update int. enable on */
+#define RTC_UIE_OFF _IO('p', 0x04) /* ... off */
+#define RTC_PIE_OFF _IO('p', 0x06) /* Periodic int. enable off */
+#define RTC_RD_TIME _IOR('p', 0x09, struct rtc_time) /* Read RTC time */
+#endif /* HAVE_LINUX_RTC_H */
+
+int F_print = 0;
+
+#ifndef LOG_PATH
+#define LOG_PATH "/var/log/clocks.log"
+#endif
+#ifndef WTMP_PATH
+#define WTMP_PATH "/var/log/wtmp"
+#endif
+
+ /* Here the information for CMOS clock adjustments is kept. */
+#define ADJPATH "/etc/adjtime"
+
+ /* used for debugging the code. */
+ /* #define DEBUG */
+
+#define RTC_JITTER .000025 /* assumed error in reading CMOS clock (sec) */
+#define SECONDSPERDAY 86400
+#define BUFLEN 128
+
+#ifndef USE_INLINE_ASM_IO
+static int port_fd = -1; /* used to access the RTC via /dev/port I/O */
+#endif
+static char *cmos_device; /* filename of the RTC device */
+static int cmos_fd = -1;
+
+struct hack {
+ double ref; /* reference time for time hack */
+ double sigma_ref; /* expected error in above (or zero if
+ no reference time available) */
+ time_t log; /* reference time as time_t */
+ double sys; /* system time */
+ int tick; /* "tick" system parameter */
+ int freq; /* "freq" system parameter */
+ char sys_ok; /* nonzero if system clock undisturbed
+ during previous period */
+ double cmos; /* CMOS time */
+ char cmos_ok; /* nonzero if cmos clock undisturbed
+ during previous period */
+ char valid; /* bit flags (see below) */
+ double sys_rate, sys_sigma;
+ double cmos_rate, cmos_sigma;
+ double relative_rate, relative_sigma;
+} prev;
+
+/* constants for `valid' member of struct hack */
+#define CMOS_VALID 1
+#define SYS_VALID 2
+#define REF_VALID 4
+
+struct cmos_adj
+{
+ double ca_factor;
+ long ca_adj_time;
+ double ca_remainder;
+} ca;
+
+struct timex txc;
+
+/* command line option variables */
+
+static int using_dev_rtc = -1; /* 0 = not using /dev/rtc
+ 1 = using /dev/rtc
+ -1 = will use /dev/rtc if available,
+ but have not tried to open it yet */
+static int nointerrupt = 0; /* 0 = try to detect RTC tick via interrupt
+ 1 = via another method */
+
+int adjusting = 0;
+int force_adjust;
+int comparing = 0;
+int logging = 0;
+int reviewing = 0;
+int resetting = 0; /* nonzero if need to call
+ reset_time_status() */
+int interval = 10;
+int count = 8;
+int marked;
+int universal = 0;
+int verbose = 0;
+int watch; /* nonzero if time specified on command line */
+int undisturbed_sys = 0;
+int undisturbed_cmos = 0;
+char *log_path = LOG_PATH;
+
+char *timeserver; /* points to name of timeserver */
+
+enum {HELP=131};
+
+struct option longopt[]=
+{
+ {"adjust", 2, NULL, 'a'},
+ {"force-adjust", 0, &force_adjust, 1},
+ {"compare", 2, NULL, 'c'},
+ {"log", 2, NULL, 'l'},
+ {"esterror", 1, NULL, 'e'},
+ {"frequency", 1, NULL, 'f'},
+ {"host", 1, NULL, 'h'},
+ {"help", 0, NULL, HELP},
+ {"interval", 1, NULL, 'i'},
+ {"maxerror", 1, NULL, 'm'},
+ {"offset", 1, NULL, 'o'},
+ {"print", 0, NULL, 'p'},
+ {"review", 2, NULL, 'r'},
+ {"singleshot", 1, NULL, 's'},
+ {"status", 1, NULL, 'S'},
+ {"reset", 0, NULL, 'R'},
+ {"timeconstant", 1, NULL, 'T'},
+ {"tick", 1, NULL, 't'},
+ {"utc", 0, NULL, 'u'},
+ {"directisa", 0, NULL, 'd'},
+ {"nointerrupt", 0, NULL, 'n'},
+ {"version", 0, NULL, 'v'},
+ {"verbose", 0, NULL, 'V'},
+ {"watch", 0, NULL, 'w'},
+ {0,0,0,0}
+};
+
+static void usage(void);
+static inline void outb (short port, char val);
+static inline void outb (short port, char val);
+static inline unsigned char inb (short port);
+static void cmos_init ();
+static void cmos_init_directisa ();
+static inline int cmos_read_bcd (int addr);
+static void cmos_read_time (time_t *cmos_timep, double *sysp);
+static void busywait_uip_fall(struct timeval *timestamp);
+static void busywait_second_change(struct tm *cmos, struct timeval *timestamp);
+static void compare(void);
+static void failntpdate();
+static void reset_time_status(void);
+static struct cmos_adj *get_cmos_adjustment(void);
+static void log_times(void);
+static int valid_system_rate(double ftime_sys, double ftime_ref, double sigma_ref);
+static int valid_cmos_rate(double ftime_cmos, double ftime_ref, double sigma_ref);
+static void sethackent(void);
+static void endhackent(void);
+static struct hack *gethackent(void);
+static void puthackent(struct hack *ph);
+static time_t mkgmtime(struct tm *tp);
+static int compare_tm(struct tm *first, struct tm *second);
+static void *xmalloc(int n);
+static void *xrealloc(void *pv, int n);
+static void review(void);
+static void kalman_update(double *x, int xr, double *p, double *h,
+ double *z, int zr, double *r);
+
+
+void
+usage(void)
+{
+ char msg[]=
+"\n"
+"Usage: adjtimex [OPTION]... \n"
+"Mandatory or optional arguments to long options are mandatory or optional\n"
+"for short options too.\n"
+"\n"
+"Get/Set Kernel Time Parameters:\n"
+" -p, --print print values of kernel time variables\n"
+" -t, --tick val set the kernel tick interval in usec\n"
+" -f, --frequency newfreq set system clock frequency offset\n"
+" -s, --singleshot adj slew the system clock by adj usec\n"
+" -S, --status val set kernel clock status\n"
+" -R, --reset reset status after setting parameters\n"
+" (needed for early kernels)\n"
+" -o, --offset adj add a time offset of adj usec\n"
+" -m, --maxerror val set maximum error (usec)\n"
+" -e, --esterror val set estimated error (usec)\n"
+" -T, --timeconstant val set phase locked loop time constant\n"
+" -a, --adjust[=count] set system clock parameters per CMOS \n"
+" clock or (with --review) log file\n"
+" --force-adjust override +-1 percent sanity check\n"
+"\n"
+"Estimate Systematic Drifts:\n"
+" -c, --compare[=count] compare system and CMOS clocks\n"
+" -i, --interval tim set clock comparison interval (sec)\n"
+" -l, --log[=file] log current times to file\n"
+" -h, --host timeserver query the timeserver\n"
+" -w, --watch get current time from user\n"
+" -r, --review[=file] review clock log file, estimate drifts\n"
+" -u, --utc the CMOS clock is set to UTC\n"
+" -d, --directisa access the CMOS clock directly\n"
+" -n, --nointerrupt bypass the CMOS clock interrupt access method\n"
+"\n"
+"Informative Output:\n"
+" --help print this help, then exit\n"
+" -v, --version print adjtimex program version, then exit\n"
+" -V, --verbose increase verbosity\n"
+;
+
+ fputs(msg, stdout);
+ exit(0);
+}
+
+/* return apparent value of USER_HZ in HZ, minimum nominal and maximum
+ values for tick in TICK_MIN TICK_MID and TICK_MAX, and maximum
+ frequency offset in MAXFREQ */
+static
+void probe_time(int *hz, int *tick_min, int *tick_mid, int *tick_max,
+ long *maxfreq)
+{
+ struct timex txc;
+ int tick_orig, tick_lo, tick_try, tick_hi, i;
+
+ txc.modes = 0;
+ adjtimex(&txc); /* fetch original value */
+ txc.modes = ADJ_TICK;
+ if (adjtimex(&txc) == -1) /* try setting with no change */
+ {
+ perror("adjtimex");
+ exit(1);
+ }
+
+ *maxfreq = txc.tolerance;
+ tick_orig = tick_hi = txc.tick;
+ tick_lo = tick_hi*2/3;
+ for (i = 0; i < 15; i++)
+ { /* conduct binary search for minimum
+ accepted tick value */
+// printf(" %d < minimum accepted tick value <= %d\n", tick_lo, tick_hi);
+ txc.tick = tick_try = (tick_lo + tick_hi)/2;
+ txc.modes = ADJ_TICK;
+ if (adjtimex(&txc) == -1) tick_lo = tick_try;
+ else tick_hi = tick_try;
+ }
+ *tick_min = tick_hi;
+ tick_lo = tick_orig;
+ tick_hi = tick_lo*4/3;
+ for (i = 0; i < 15; i++)
+ { /* conduct binary search for maximum
+ accepted tick value */
+// printf(" %d <= maximum accepted tick value < %d\n", tick_lo, tick_hi);
+ txc.tick = tick_try = (tick_lo + tick_hi)/2;
+ txc.modes = ADJ_TICK;
+ if (adjtimex(&txc) == -1) tick_hi = tick_try;
+ else tick_lo = tick_try;
+ }
+ *tick_max = tick_lo;
+ *tick_mid = (*tick_min + *tick_max)/2;
+ *hz = (900000/ *tick_min + 1100000/ *tick_max)/2;
+
+ txc.tick = tick_orig;
+ txc.modes = ADJ_TICK;
+ adjtimex(&txc); /* reset to original value */
+}
+
+int
+main(int argc, char *argv[])
+{
+ int ret, saveerr, changes;
+ extern char *optarg;
+ int c;
+
+ txc.modes = 0;
+
+ while((c = getopt_long_only(argc, argv,
+ "a::c::l::e:f:h:i:m:o:pr::s:S:RT:t:udvVw",
+ longopt, NULL)) != -1)
+ {
+ switch(c)
+ {
+ case 0: break; /* options that just set a variable
+ are handled in longopt */
+ case 'a':
+ adjusting = 1;
+ if (optarg)
+ count = atoi(optarg);
+ break;
+ case 'c':
+ comparing = 1;
+ if (optarg)
+ count = atoi(optarg);
+ break;
+ case 'l':
+ logging = 1;
+ if (optarg)
+ log_path = strdup(optarg);
+ if (!log_path)
+ {
+ fprintf (stderr, "insufficient memory\n");
+ exit(1);
+ }
+ break;
+ case 'h':
+ timeserver = strdup(optarg);
+ if (!timeserver)
+ {
+ fprintf (stderr, "insufficient memory\n");
+ exit(1);
+ }
+ logging = 1;
+ break;
+ case 'r':
+ reviewing = 1;
+ if (optarg)
+ log_path = strdup(optarg);
+ if (!log_path)
+ {
+ fprintf (stderr, "insufficient memory\n");
+ exit(1);
+ }
+ break;
+ case 'i':
+ interval = atoi (optarg);
+ if (interval <= 1 || interval > 1000)
+ {
+ fprintf (stderr, "repeat interval out of range\n");
+ exit (1);
+ }
+ break;
+ case 'p':
+ F_print = 1;
+ break;
+ case 'o':
+ txc.offset = atol(optarg);
+ txc.modes |= ADJ_OFFSET;
+ break;
+ case 's':
+ txc.offset = atol(optarg);
+ txc.modes |= ADJ_OFFSET_SINGLESHOT;
+ break;
+ case 'S':
+ txc.status = atol(optarg);
+ txc.modes |= ADJ_STATUS;
+ break;
+ case 'R': resetting = 1; break;
+ case 'f':
+ txc.freq = atol(optarg);
+ txc.modes |= ADJ_FREQUENCY;
+ break;
+ case 'm':
+ txc.maxerror = atol(optarg);
+ txc.modes |= ADJ_MAXERROR;
+ break;
+ case 'e':
+ txc.esterror = atol(optarg);
+ txc.modes |= ADJ_ESTERROR;
+ break;
+ case 'T':
+ txc.constant = atol(optarg);
+ txc.modes |= ADJ_TIMECONST;
+ break;
+ case 't':
+ txc.tick = atol(optarg);
+ txc.modes |= ADJ_TICK;
+ break;
+ case 'u':
+ universal = 1;
+ break;
+ case 'd':
+ using_dev_rtc = 0;
+ break;
+ case 'n':
+ nointerrupt = 1;
+ break;
+ case 'v':
+ {
+ printf("adjtimex %s\n", VERSION);
+ exit(0);
+ }
+ case 'V':
+ verbose++;
+ break;
+ case 'w':
+ watch = 1;
+ logging = 1;
+ break;
+ case HELP:
+ usage();
+ break;
+ case '?':
+ default:
+ fprintf(stderr, "Unrecognized option %s\nFor valid "
+ "options, try 'adjtimex --help'\n", argv[optind-1]);
+ exit(1);
+ }
+ }
+
+ changes = txc.modes;
+
+ if (count <= 0 ) {
+ fprintf(stderr, "loop count out of range\n");
+ exit(1);
+ }
+
+ if (reviewing)
+ {
+ review();
+ exit(0);
+ }
+
+ if (adjusting || comparing)
+ {
+ if (changes || F_print)
+ {
+ fprintf(stderr,
+"-adjust or -compare cannot be used with any other options that"
+" set values\n");
+ exit(1);
+ }
+ compare();
+ }
+
+ if (logging)
+ {
+ /*
+ if (geteuid() != 0)
+ {
+ fprintf(stderr, "sorry, only root can record clock comparisons\n");
+ exit(1);
+ }
+ */
+ log_times();
+ exit(0);
+ }
+
+ if ((txc.modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT &&
+ txc.modes != ADJ_OFFSET_SINGLESHOT)
+ {
+ fprintf(stderr, "-singleshot cannot be used with "
+ "any other option except -print\n");
+ usage();
+ }
+
+ errno = 0;
+ ret = adjtimex(&txc);
+ saveerr = errno;
+ if (F_print) {
+ printf(" mode: %d\n"
+ " offset: %ld\n"
+ " frequency: %ld\n"
+ " maxerror: %ld\n"
+ " esterror: %ld\n"
+ " status: %d\n"
+ "time_constant: %ld\n"
+ " precision: %ld\n"
+ " tolerance: %ld\n"
+ " tick: %ld\n"
+ " raw time: %ds %dus = %d.%06d\n",
+ txc.modes,
+ txc.offset,
+ txc.freq,
+ txc.maxerror,
+ txc.esterror,
+ txc.status,
+ txc.constant,
+ txc.precision,
+ txc.tolerance,
+ txc.tick,
+ (int)txc.time.tv_sec,
+ (int)txc.time.tv_usec,
+ (int)txc.time.tv_sec,
+ (int)txc.time.tv_usec);
+ if (saveerr == 0 && ret != 0)
+ printf(" return value = %d\n", ret);
+ }
+ if (ret != 0 && saveerr != 0) {
+ if (ret != -1)
+ fprintf(stderr, "%d ", ret);
+ errno = saveerr;
+ perror("adjtimex");
+ {
+ int hz, tick_min, tick_mid, tick_max;
+ long maxfreq;
+ probe_time(&hz, &tick_min, &tick_mid, &tick_max, &maxfreq);
+
+ printf("for this kernel:\n"
+ " USER_HZ = %d (nominally %d ticks per second)\n"
+ " %d <= tick <= %d\n"
+ " %ld <= frequency <= %ld\n",
+ hz, hz, tick_min, tick_max, -maxfreq, maxfreq);
+ }
+ exit(1);
+ }
+ if (changes && resetting)
+ reset_time_status();
+
+ return 0;
+}
+
+static inline void
+outb (short port, char val)
+{
+#ifdef USE_INLINE_ASM_IO
+ __asm__ volatile ("out%B0 %0,%1"::"a" (val), "d" (port));
+
+#else
+ lseek (port_fd, port, 0);
+ write (port_fd, &val, 1);
+#endif
+}
+
+static inline unsigned char
+inb (short port)
+{
+ unsigned char ret;
+
+#ifdef USE_INLINE_ASM_IO
+ __asm__ volatile ("in%B0 %1,%0":"=a" (ret):"d" (port));
+
+#else
+ lseek (port_fd, port, 0);
+ read (port_fd, &ret, 1);
+#endif
+ return ret;
+}
+
+/*
+ * Main initialisation of CMOS clock access methods, for all modes.
+ * Set the global variable cmos_device to the first available RTC device
+ * driver filename (/dev/rtc, /dev/rtc0, etc.), and set cmos_fd to
+ * a file descriptor for it.
+ * Failing that, select and initialize direct I/O ports mode.
+ */
+static
+void cmos_init ()
+{
+/*
+ following explanation taken from hwclock sources:
+ /dev/rtc is conventionally chardev 10/135
+ ia64 uses /dev/efirtc, chardev 10/136
+ devfs (obsolete) used /dev/misc/... for miscdev
+ new RTC framework + udev uses dynamic major and /dev/rtc0.../dev/rtcN
+*/
+ char *fls[] = {
+#ifdef __ia64__
+ "/dev/efirtc",
+ "/dev/misc/efirtc",
+#endif
+ "/dev/rtc",
+ "/dev/rtc0",
+ "/dev/misc/rtc",
+ NULL
+ };
+ char **p=fls;
+
+ if (using_dev_rtc < 0)
+ {
+ while ((cmos_device=*p++))
+ {
+ cmos_fd = open (cmos_device, O_RDONLY);
+ if (cmos_fd >= 0)
+ {
+ if (verbose)
+ fprintf (stdout, "opened %s for reading\n", cmos_device);
+ using_dev_rtc = 1;
+ return;
+ }
+ if (verbose)
+ {
+ int saveerr=errno;
+ fprintf (stdout, "adjtimex: cannot open %s for reading\n",
+ cmos_device);
+ errno = saveerr;
+ perror("adjtimex");
+ }
+ }
+
+ using_dev_rtc = 0;
+ }
+ else if (using_dev_rtc > 0)
+ return;
+
+ /* otherwise do direct I/O */
+ cmos_init_directisa();
+}
+
+/*
+ * Initialise CMOS clock access method, only for direct I/O ports mode.
+ * Set the global variable port_fd to a file descriptor for /dev/port.
+ * This function can safely be called repeatedly (does nothing the
+ * second and following times).
+ */
+static
+void cmos_init_directisa ()
+{
+#ifdef USE_INLINE_ASM_IO
+ if (verbose)
+ fprintf (stdout, "using I/O ports\n");
+
+ if (ioperm (0x70, 2, 1))
+ {
+ fprintf (stderr, "adjtimex: unable to get I/O port access\n");
+ exit (1);
+ }
+#else
+ if (port_fd >= 0) /* already initialised */
+ return;
+
+ if (verbose)
+ fprintf (stdout, "using /dev/port I/O\n");
+
+ if (port_fd < 0)
+ port_fd = open ("/dev/port", O_RDWR);
+ if (port_fd < 0)
+ {
+ perror ("adjtimex: unable to open /dev/port read/write");
+ exit (1);
+ }
+ if (verbose)
+ fprintf (stdout, "opened /dev/port for reading\n");
+
+ if (lseek (port_fd, 0x70, 0) < 0 || lseek (port_fd, 0x71, 0) < 0)
+ {
+ perror ("adjtimex: unable to seek port 0x70 in /dev/port");
+ exit (1);
+ }
+#endif
+}
+
+#define CMOS_READ(addr) ({outb(0x70,(addr)|0x80); inb(0x71);})
+
+static inline int
+cmos_read_bcd (int addr)
+{
+ int b;
+
+ b = CMOS_READ (addr);
+ return (b & 15) + (b >> 4) * 10;
+}
+
+static int timeout; /* An alarm signal has occurred */
+
+static void
+alarm_handler (int const dummy) {
+ timeout = 1;
+}
+
+/*
+ * starts (or cancels) a 2 second timeout period
+ * the global boolean timeout indicates that the timeout has been reached
+ */
+static void
+alarm_timeout (int onoff) {
+ static struct sigaction oldaction;
+
+ if (onoff)
+ {
+ struct sigaction action;
+
+ action.sa_handler = &alarm_handler;
+ sigemptyset(&action.sa_mask);
+ action.sa_flags = 0;
+ sigaction(SIGALRM, &action, &oldaction); /* Install our signal handler */
+
+ timeout = 0; /* reset global timeout flag */
+ alarm(2); /* generate SIGALARM 2 seconds from now */
+ }
+ else
+ {
+ alarm(0); /* cancel alarm */
+ sigaction(SIGALRM, &oldaction, NULL); /* remove our signal handler */
+ }
+}
+
+
+/* return CMOS time in CMOS_TIMEP and sytem time in SYSP. cmos_init()
+ must have been called before this function. */
+static void
+cmos_read_time (time_t *cmos_timep, double *sysp)
+{
+ int rc;
+ struct tm tm;
+ static int summertime_correction=0;
+ static int sanity_checked=0;
+ time_t cmos_time;
+ struct timeval now;
+ int noint_fallback = 1; /* detect tick by 0 => uip, 1 => time change */
+ int got_tick = 0;
+ int got_time = 0;
+ int type_uie, count;
+ double update_delay;
+
+ if (using_dev_rtc > 0) /* access the CMOS clock thru /dev/rtc */
+ {
+ if (!nointerrupt) /* get RTC tick via update interrupt */
+ {
+ struct timeval before;
+
+ gettimeofday(&before, NULL);
+
+ /* Ordinarily, reading /dev/rtc does not wait until the
+ beginning of the next second. It only returns the current timer
+ value, so it's only accurate to 1 sec which isn't good enough for
+ us. I see this comment in drivers/char/rtc.c, function
+ rtc_get_rtc_time(), in the kernel sources:
+
+ * read RTC once any update in progress is done. The update
+ * can take just over 2ms. We wait 10 to 20ms. There is no need to
+ * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
+ * If you need to know *exactly* when a second has started, enable
+ * periodic update complete interrupts, (via ioctl) and then
+ * immediately read /dev/rtc which will block until you get the IRQ.
+ * Once the read clears, read the RTC time (again via ioctl). Easy.
+ */
+ ioctl (cmos_fd, RTC_PIE_OFF, NULL); /* disable periodic interrupts */
+ rc = ioctl (cmos_fd, RTC_UIE_ON, NULL); /* enable update
+ complete interrupts */
+ if (rc == -1) /* no interrupts? fallback to busywait */
+ {
+ if (verbose)
+ fprintf(stdout,
+ "%s doesn't allow user access to update interrupts\n"
+ " - using busy wait instead\n", cmos_device);
+ nointerrupt = 1;
+ }
+ else /* wait for update-ended interrupt */
+ {
+ unsigned long interrupt_info;
+
+ if (verbose)
+ fprintf (stdout, "waiting for CMOS update-ended interrupt\n");
+
+ do {
+ {
+ /* avoid blocking even if /dev/rtc never becomes readable */
+ fd_set readfds;
+ struct timeval tv;
+ int retval;
+
+ FD_ZERO(&readfds);
+ FD_SET(cmos_fd, &readfds);
+ tv.tv_sec=2; tv.tv_usec=0; /* wait up to 2 sec */
+ retval = select(cmos_fd+1, &readfds, NULL, NULL, &tv);
+ if (retval <= 0)
+ {
+ ioctl (cmos_fd, RTC_UIE_OFF, NULL); /* disable update complete
+ interrupts */
+ if (retval == -1)
+ perror("select()");
+ if (!retval)
+ if (verbose)
+ fprintf(stdout,
+ "timeout waiting for a CMOS update interrupt from %s\n"
+ " - using busy wait instead\n", cmos_device);
+ nointerrupt = 1;
+ goto directisa;
+ }
+ }
+ rc = read(cmos_fd, &interrupt_info, sizeof(interrupt_info));
+ gettimeofday(&now, NULL);
+
+ if (rc == -1)
+ {
+ /* no timeout, but read(/dev/rtc) failed for another reason */
+ char message[128];
+ snprintf(message, sizeof(message),
+ "adjtimex: "
+ "read() from %s to wait for clock tick failed",
+ cmos_device);
+ perror(message);
+ exit(1);
+ }
+
+ type_uie = (int)(interrupt_info & 0x80);
+ count = (int)(interrupt_info >> 8);
+ } while (((type_uie == 0) || (count > 1)) && !nointerrupt);
+ /* The low-order byte holds
+ the interrupt type. The first read may succeed
+ immediately, but in that case the byte is zero, so we
+ know to try again. If there has been more than one
+ interrupt, then presumably periodic interrupts were
+ enabled. We need to try again for just the update
+ interrupt. */
+
+ update_delay = (now.tv_sec + .000001*now.tv_usec) -
+ (before.tv_sec + .000001*before.tv_usec);
+
+ if ((type_uie) && (count == 1) && (update_delay > .001))
+ got_tick = 1;
+ else
+ {
+ if (verbose)
+ fprintf(stdout, "CMOS interrupt with status "
+ "0x%2x came in only %8.6f sec\n"
+ " - using busy wait instead\n",
+ (unsigned int)interrupt_info&0xff, update_delay);
+ nointerrupt = 1;
+ }
+ } /* end of successful RTC_UIE_ON case */
+ } /* end of interrupt tryouts */
+
+
+ /* At this stage, we either just detected the clock tick via an
+ update interrupt, or detected nothing yet (interrupts were
+ bypassed, unavailable, or timeouted). Fallback to busywaiting
+ for the tick. */
+
+ directisa:
+ if (!got_tick)
+ {
+ if (noint_fallback)
+ {
+ busywait_second_change(&tm, &now);
+ got_time = 1;
+ }
+ else
+ busywait_uip_fall(&now);
+ got_tick = 1;
+ }
+
+
+ /* At this stage, we just detected the clock tick, by any method.
+ Now get this just beginning RTC second, unless we already have it */
+
+ if (!got_time)
+ {
+ rc = ioctl (cmos_fd, RTC_RD_TIME, &tm);
+
+ /* RTC_RD_TIME can fail when the device driver detects
+ that the RTC isn't running or contains invalid data.
+ Such failure has been detected earlier, unless: We used
+ noint_fallback=1 to get busywait_uip_fall() as fallback.
+ Or: UIE interrupts do beat, but RTC is invalid. */
+ if (rc == -1)
+ {
+ char message[128];
+ snprintf(message, sizeof(message),
+ "adjtimex: "
+ "ioctl(%s, RTC_RD_TIME) to read the CMOS clock failed",
+ cmos_device);
+ perror(message);
+ exit(1);
+ }
+ }
+
+
+ /* disable update complete interrupts
+ It could seem more natural to do this above, just after we
+ actually got the interrupt. But better do it here at the end,
+ after all time-critical operations including the RTC_RD_TIME. */
+ ioctl (cmos_fd, RTC_UIE_OFF, NULL);
+ }
+ else /* access the CMOS clock thru I/O ports */
+ {
+ /* The "do" loop is "low-risk programming" */
+ /* In theory it should never run more than once */
+ do
+ {
+ busywait_uip_fall(&now);
+ tm.tm_sec = cmos_read_bcd (0);
+ tm.tm_min = cmos_read_bcd (2);
+ tm.tm_hour = cmos_read_bcd (4);
+ tm.tm_wday = cmos_read_bcd(6)-1;/* RTC uses 1 - 7 for day of the week, 1=Sunday */
+ tm.tm_mday = cmos_read_bcd (7);
+ tm.tm_mon = cmos_read_bcd(8)-1; /* RTC uses 1 base */
+ /* we assume we're not running on a PS/2, where century is
+ in byte 55 */
+ tm.tm_year = cmos_read_bcd(9)+100*cmos_read_bcd(50)-1900;
+ } while (tm.tm_sec != cmos_read_bcd (0));
+ }
+ tm.tm_isdst = -1; /* don't know whether it's summer time */
+
+
+ if (universal)
+ cmos_time = mkgmtime(&tm);
+ else
+ cmos_time = mktime(&tm);
+
+ cmos_time += summertime_correction;
+
+ if (verbose)
+ printf ("CMOS time %s (%s) = %ld\n", asctime (&tm),
+ universal?"assuming UTC":
+ (summertime_correction?"assuming local time with summer time adjustment":
+ "assuming local time without summer time adjustment"),
+ cmos_time);
+
+ if (!sanity_checked)
+ {
+ /* There are clues to whether the CMOS clock is set to
+ summer time, which could be used as suggested by Alain
+ Guibert <alguibert at free.fr>:
+
+ Since version 2.5, hwclock records CMOS timezone UTC or
+ LOCAL as 1st item of 3rd line of /etc/adjtime. If it's
+ "UTC", take offset 0 as if --utc was used. Otherwise: Since
+ version 2.20, hwclock records CMOS timezone offset in 3rd
+ item of 3rd line of /etc/adjtime. If it's there, take
+ it. Otherwise if last adjustment date (2nd item of 1st line)
+ exists and is not zero, take timezone offset at this last
+ write time. Otherwise take the possibly false current
+ offset.
+
+ However, /etc/adjtime cannot be relied on. The user
+ might have booted Windows, which could have adjusted the
+ CMOS clock (including a summer time correction) without
+ updating /etc/adjtime. Instead, we use a heuristic: if
+ the CMOS and system times differ by more than six
+ minutes, try shifting the CMOS time by some multiple of
+ one hour.
+ */
+ if (now.tv_sec<cmos_time)
+ summertime_correction = -((cmos_time-now.tv_sec+6*60)/(60*60))*(60*60);
+ else
+ summertime_correction = (((now.tv_sec-cmos_time+6*60)/(60*60))*(60*60));
+ if (abs(summertime_correction) > 13*60*60)
+ {
+ printf("WARNING: CMOS time %ld differs from system time %ld by %3.2f hours\n",
+ cmos_time, now.tv_sec, (summertime_correction)/3600.);
+ if(logging)
+ {
+ printf("logging suppressed\n");
+ logging=0;
+ }
+ }
+ if (verbose && summertime_correction)
+ printf("adjusting CMOS times by %d hour\n",
+ summertime_correction/(60*60));
+ cmos_time += summertime_correction; /* assume start/end of
+ summer time or local
+ time/UTC difference */
+ if (abs(cmos_time-now.tv_sec)>6*60) /* still different by more than 6 min? */
+ {
+ if (cmos_time>now.tv_sec)
+ printf("WARNING: CMOS time is %3.2f min ahead of system clock\n",
+ (cmos_time-now.tv_sec)/60.);
+ else
+ printf("WARNING: CMOS time is %3.2f min behind system clock\n",
+ (now.tv_sec-cmos_time)/60.);
+ if(logging)
+ {
+ printf("logging suppressed\n");
+ logging=0;
+ }
+ }
+ sanity_checked=1;
+ }
+ *cmos_timep=cmos_time;
+ *sysp = now.tv_sec + .000001*now.tv_usec;
+}
+
+
+/*
+ * busywait for UIP fall and timestamp this event
+ *
+ * Maintainance note: In order to detect its fall, we first have to
+ * detect the update-in-progress flag up state. This UIP up state lasts
+ * for 2 ms each second. Detecting a 2 ms event, when other processes
+ * can steal us one or several 10 ms timeslices, this is something that
+ * can very easily fail. We *can* miss a second tick, or even several in
+ * a row, under heavy system load. Missing ticks is not a severe problem
+ * for adjtimex, as long as we timestamp accurately the tick we'll
+ * finally catch. However there is a timeout issue: we can't just arm an
+ * alarm_timeout() for 2 seconds, as when waiting for UIE interrupts and
+ * in busywait_second_change(), because it would make us hard fail after
+ * only one or two missed ticks.
+ */
+static void
+busywait_uip_fall(struct timeval *timestamp)
+{
+ long i;
+
+ /*
+ * Initialise direct I/O access mode.
+ * This may have been already done previously by the main
+ * initialisation cmos_init(), if the CMOS access mode is direct I/O.
+ * We init it here again, to make busywait_uip_fall() usable in any
+ * other CMOS access modes (/dev/rtc).
+ */
+ cmos_init_directisa();
+
+ if (verbose>1)
+ fprintf (stdout, " waiting for CMOS update-in-progress fall\n");
+
+ /* read RTC exactly on falling edge of update-in-progress flag */
+ /* Wait for rise.... (may take up to 1 second) */
+
+ for (i = 0; i < 10000000; i++)
+ if (CMOS_READ (10) & 0x80)
+ break;
+
+ /* Wait for fall.... (must try at least 2.228 ms) */
+
+ for (i = 0; i < 1000000; i++)
+ if (!(CMOS_READ (10) & 0x80)) {
+ gettimeofday(timestamp, NULL);
+ break;
+ }
+}
+
+/*
+ * Busywait for a change in RTC time and timestamp this event.
+ * cmos_init() must have been called before, and the selected
+ * access method must be using_dev_rtc=1.
+ *
+ * Important note: an ioctl(RTC_RD_TIME) call that happens while the RTC
+ * is updating itself (UIP up, a 2 milliseconds long event) will block.
+ * Properly block until UIP release on recent Linux kernels since 2.6.13.
+ * However all older Linux kernels had a misfeature: they blocked much
+ * longer than necessary, up to 20 ms longer in the worst case.
+ * The method used here cannot detect precisely the CMOS clock tick on
+ * such older kernels. It would result in a random delay, the timestamp
+ * being between 8 and 18 ms late. Hell: that's 3 orders of magnitude
+ * worse than the accuracy expected from this function.
+ */
+static void
+busywait_second_change(struct tm *cmos, struct timeval *timestamp)
+{
+ struct tm begin;
+ int rc;
+
+ if (verbose)
+ fprintf (stdout, "waiting for CMOS time change\n");
+
+ alarm_timeout(1); /* arm a 2 seconds timeout */
+
+ /* pick a reference time */
+ rc = ioctl (cmos_fd, RTC_RD_TIME, &begin);
+
+ /* RTC_RD_TIME can fail when the device driver detects
+ that the RTC isn't running or contains invalid data */
+ if (rc == -1)
+ {
+ char message[128];
+ snprintf(message, sizeof(message),
+ "adjtimex: "
+ "ioctl(%s, RTC_RD_TIME) to read the CMOS clock failed",
+ cmos_device);
+ perror(message);
+ exit(1);
+ }
+
+ /* loop until time changes */
+ do
+ {
+ ioctl (cmos_fd, RTC_RD_TIME, cmos);
+ }
+ while ((cmos->tm_sec == begin.tm_sec) && !timeout);
+ gettimeofday(timestamp, NULL);
+
+ alarm_timeout(0); /* disable timeout */
+
+ /* Sometimes the RTC isn't running, but the device driver didn't
+ notice. Then the RTC_RD_TIME call succeeds, but provides us some
+ static wrong time. That's why we needed an alarm timeout */
+
+ /* timeout without a change? */
+ if (cmos->tm_sec == begin.tm_sec)
+ {
+ fprintf(stderr,
+ "adjtimex: timeout waiting for CMOS time change on %s\n"
+ "The CMOS clock appears to be stopped:\n"
+ "Please try to set and restart it with hwclock --systohc\n",
+ cmos_device);
+ exit (1);
+ }
+
+}
+
+static inline void
+xusleep(long microseconds)
+{
+ struct timespec ts;
+
+ ts.tv_sec = microseconds/1000000;
+ ts.tv_nsec = (microseconds - ts.tv_sec*1000000) * 1000;
+
+ while (nanosleep (&ts, &ts) < 0)
+ continue;
+}
+
+/* compare the system and CMOS clocks. If "adjusting" is nonzero,
+ adjust sytem time to match the CMOS clock. */
+void
+compare()
+{
+ struct timex txc;
+ time_t cmos_time;
+ double cmos_sec, system_sec, dif, dif_prev = 0.;
+ struct cmos_adj *pca = get_cmos_adjustment();
+ double cmos_adjustment;
+ int loops = 0;
+ extern char *optarg;
+ int wrote_to_log = 0;
+ int hz, tick_min, tick_mid, tick_max;
+ long maxfreq;
+ struct timeval tv_dummy;
+
+ /* dummy training call: the next important timestamp will be more accurate */
+ gettimeofday(&tv_dummy, NULL);
+
+ probe_time(&hz, &tick_min, &tick_mid, &tick_max, &maxfreq);
+
+#ifdef DEBUG
+ /*
+cmos clock last adjusted at Tue Aug 26 11:43:57 1997 (= 872610237)
+ current cmos time Tue Aug 26 21:27:05 1997 EDT (= 872645225)
+*/
+ {
+ struct tm bdt;
+ if (universal)
+ {
+ bdt = *gmtime(&pca->ca_adj_time);
+ (void)mkgmtime(&bdt); /* set tzname */
+ }
+ else
+ {
+ bdt = *localtime(&pca->ca_adj_time);
+ (void)mktime(&bdt); /* set tzname */
+ }
+ printf ("cmos clock last adjusted %.24s %s "
+ "(= %ld)\n",
+ ctime(&pca->ca_adj_time), tzname[tm.tm_isdst?1:0], (long) pca->ca_adj_time);
+ }
+#endif
+
+ cmos_init ();
+
+ while (count != 0)
+ {
+ if (count > 0) count--;
+
+ cmos_read_time (&cmos_time, &system_sec);
+
+
+ /* If we're adjusting time parameters, we want to make a log
+ entry only for the first two comparisons (before we change
+ the parameters). Otherwise, we want to log the first and last
+ comparisons in order to maximize the duration. */
+ if (logging && (wrote_to_log ^ (adjusting?(loops==0):(count!=0))))
+ {
+ struct hack h;
+
+ h.ref = 0;
+ h.sigma_ref = 0;
+ h.log = (time_t)system_sec;
+ h.sys = system_sec;
+ txc.modes = 0;
+ adjtimex(&txc);
+ h.tick = txc.tick;
+ h.freq = txc.freq;
+ h.sys_ok = wrote_to_log;
+ h.cmos = cmos_time;
+ h.cmos_ok = wrote_to_log;
+ puthackent(&h);
+ wrote_to_log = 1;
+ }
+
+#ifdef DEBUG
+ tm=*gmtime(cmos_time);
+ printf (" current cmos time %.24s %s (= %ld)\n",
+ asctime(&tm), tzname[tm.tm_isdst?1:0], (long) cmos_time);
+#endif
+ cmos_adjustment = ((double) (cmos_time - pca->ca_adj_time))
+ * pca->ca_factor / SECONDSPERDAY
+ + pca->ca_remainder;
+ cmos_sec = cmos_time + cmos_adjustment;
+#ifdef DEBUG
+ printf (
+" time since last adjustment %10.6f days (= %9d sec)\n",
+ (int) (cmos_time - pca->ca_adj_time) / (double)SECONDSPERDAY,
+ (int) (cmos_time - pca->ca_adj_time));
+ printf (
+" factor %10.6f sec/day\n",
+ pca->ca_factor);
+ printf (
+" adjustment %10.6f + %7.6f = %7.6f sec\n",
+ ((double) (cmos_time - pca->ca_adj_time))*pca->ca_factor/SECONDSPERDAY,
+ pca->ca_remainder, cmos_adjustment);
+#endif
+ dif = system_sec - cmos_sec;
+
+ txc.modes = 0;
+ if (adjtimex (&txc) < 0) {perror ("adjtimex"); exit(1);}
+/*
+ --- current --- -- suggested --
+cmos time system-cmos error_ppm tick freq tick freq
+1094939320 -14394.974188
+1094939330 -14394.971203 298.5 10001 1290819
+1094939340 -14394.968203 300.0 10001 1290819 9998 1289097
+*/
+
+ if (! marked++ )
+ {
+ if (interval)
+ printf (
+" --- current --- -- suggested --\n"
+"cmos time system-cmos error_ppm tick freq tick freq\n");
+ else
+ printf (
+"cmos time system-cmos error_ppm tick freq\n");
+ }
+ printf ("%10ld %13.6f",
+ (long) cmos_sec,
+ dif);
+ if (++loops > 1)
+ { /* print difference in rates */
+#define SHIFT (1<<16)
+ double second_diff, error_ppm;
+ second_diff = dif - dif_prev;
+ error_ppm = second_diff/interval*1000000;
+ printf ("%11.1f %6ld %9ld",
+ error_ppm,
+ txc.tick,
+ txc.freq);
+ if (loops > 2)
+ { /* print suggested values */
+ long tick_delta = 0, freq_delta = 0;
+
+ tick_delta = ceil((-error_ppm + txc.freq/SHIFT - hz)/hz);
+ freq_delta = -(error_ppm + tick_delta*hz)*SHIFT;
+ printf(" %6ld %9ld\n",
+ txc.tick + tick_delta, txc.freq + freq_delta);
+ if (loops > 4 && adjusting)
+ {
+ if (abs(error_ppm)>10000)
+ {
+ if (!force_adjust)
+ {
+ printf(
+"\nERROR: required correction is greater than plus/minus 1 percent (10000 \n"
+"parts per million), quitting (use --force-adjust to override).\n");
+ if (resetting)
+ reset_time_status();
+ exit(1);
+ }
+ }
+
+ txc.modes = ADJ_FREQUENCY | ADJ_TICK;
+ txc.tick += tick_delta;
+ txc.freq += freq_delta;
+ if (adjtimex (&txc) < 0)
+ {
+ perror ("adjtimex");
+ exit(1);
+ }
+ if (resetting)
+ reset_time_status();
+ loops -= 3;
+ }
+ }
+ else
+ printf("\n");
+ }
+ else
+ printf("\n");
+ dif_prev = dif;
+ if (interval == 0)
+ break;
+ if (count) /* if it is not the last round */
+ xusleep (interval*1000000L - 500000); /* reading RTC takes 1 sec */
+ }
+}
+
+void reset_time_status()
+{
+ /* Using the adjtimex(2) system call to set any time parameter makes
+ an early kernel (2.0.40 and 2.4.18 or later are reportedly okay)
+ think the clock is synchronized with an external time source, so
+ it sets the kernel variable time_status to TIME_OK. Thereafter,
+ it will periodically adjust the CMOS clock to match. We prevent
+ this by setting the clock, because that has the side effect of
+ resetting time_status to TIME_BAD. We try not to actually change
+ the clock setting. */
+ struct timeval tv1, tv2;
+ long carry_sec, overhead_usec;
+ if (gettimeofday(&tv1, NULL)) {perror("adjtimex"); exit(1);}
+ if (gettimeofday(&tv2, NULL)) {perror("adjtimex"); exit(1);}
+ overhead_usec = tv2.tv_usec - tv1.tv_usec +
+ 1000000*(tv2.tv_sec - tv1.tv_sec);
+ tv2.tv_usec += overhead_usec;
+ carry_sec = tv2.tv_usec/1000000;
+ tv2.tv_sec += carry_sec;
+ tv2.tv_usec -= 1000000*carry_sec;
+ if (settimeofday(&tv2, NULL)) {perror("adjtimex"); exit(1);}
+}
+
+static void log_times()
+{
+#ifdef NET_TIME_CLIENT
+ struct protoent proto;
+ int sockfd, val, len, c;
+ struct sockaddr sa={AF_INET, "127.0.0.1"};
+ struct hostent he;
+#endif
+ double sigma_ref;
+ char buf[64], *s;
+ int n;
+ struct timeval tv_sys;
+ struct tm bdt;
+ time_t when, tref;
+ double ftime_ref, ftime_sys, ftime_cmos;
+
+ /* dummy training call: the next important timestamp will be more accurate */
+ gettimeofday(&tv_sys, NULL);
+
+ if (watch)
+ {
+ while(1) {
+ printf("Please press <enter> when you know the time of day: ");
+ (void)getchar();
+ gettimeofday(&tv_sys, NULL);
+ when = tv_sys.tv_sec;
+ bdt = *localtime(&when); /* set default values for most fields */
+ strftime(buf, sizeof(buf), "%Z", &bdt);
+ printf(" system time then was %.24s %s\n", asctime(&bdt), buf);
+ ftime_sys = tv_sys.tv_sec + tv_sys.tv_usec*.000001;
+ printf("What time was that according to your reference (%s)?\n"
+ "(hh:mm:ss, or `r' to retry, or `q' to quit): ", buf);
+ if (fgets(buf, sizeof(buf), stdin) == NULL) exit(1);
+ s = buf;
+ while(isspace(*s)) s++;
+ if (*s == 'q') exit(0);
+ if (*s == 'r') continue;
+
+ strptime(buf, "%T", &bdt); /* set time fields from user input */
+ printf(" reference time is %s", asctime(&bdt));
+ tref = ftime_ref = mktime(&bdt); /* construct a time_t
+ corresponding to the user
+ input */
+ printf(" mktime returns time of %s", ctime(&tref));
+
+ printf("reference time - system time = %12.3f - %12.3f "
+ "= %4.3f sec\n",
+ ftime_ref, ftime_sys, ftime_ref - ftime_sys);
+
+ printf("How big could the error be in this, in seconds?\n"
+ "(or `r' to retry, or `q' to quit) [.5] : ");
+ if (fgets(buf, sizeof(buf), stdin) == NULL) exit(1);
+ s = buf;
+ while(isspace(*s)) s++;
+ if (*s == 'q') exit(0);
+ if (*s == 'r') continue;
+
+ n = sscanf(buf, "%lf", &sigma_ref);
+ if (n < 1)
+ sigma_ref = .5;
+ else if (sigma_ref < .02)
+ {
+ printf("You get credit for .02 sec.\n");
+ sigma_ref = .02;
+ }
+ break;
+ }
+ }
+ else if (timeserver)
+ {
+ FILE *ifile;
+ char command[128];
+ char buf[BUFLEN];
+ int i, j;
+ double d, mean=0, val, var=0, num=0; /* for finding statistics */
+
+ struct stat filestat;
+ char *paths[]={"/usr/bin/ntpdate","/bin/ntpdate",
+ "/usr/sbin/ntpdate","/sbin/ntpdate"};
+
+ for (i=0; i<sizeof(paths)/sizeof(paths[0]); i++)
+ {
+ stat(paths[i], &filestat);
+ if (S_ISREG(filestat.st_mode))
+ goto found_ntpdate;
+ }
+ failntpdate("cannot find ntpdate");
+
+ found_ntpdate:
+ sprintf(command, "%s -q -d %.32s ", paths[i], timeserver);
+ ifile = popen(command, "r");
+
+ if (ifile == NULL)
+ failntpdate("call to ntpdate failed");
+
+ /* read and save the significant lines, which should look like this:
+filter offset: -0.02800 -0.01354 -0.01026 -0.01385
+offset -0.013543
+ 1 Sep 11:51:23 ntpdate[598]: adjust time server 1.2.3.4 offset -0.013543 sec
+ */
+
+ while(fgets(buf, BUFLEN, ifile))
+ {
+ if (!strncmp(buf, "filter offset:", strlen("filter offset:")))
+ {
+ /* These lines show the offsets for each of ntpdate's
+ samples. Find their variance, which we will use to
+ indicate the accuracy of the offset we're using.
+ This is probably conservative, since the offset we're
+ using is probably not close to the mean. */
+ s = strstr(buf, ":")+1;
+ for (j = 0; j < 4; j++)
+ if ((val = strtod(s, &s))) /* diregard offset of
+ exactly zero - might be okay, but more
+ likely no conversion was performed */
+ {
+ d = val - mean;
+ num += 1.;
+ var = (num-1)/num*(var + d*d/num);
+ mean = ((num-1.)*mean + val)/num;
+ }
+ }
+
+ if (num>0 && (strstr(buf,"adjust time server") || strstr(buf,"step time server")))
+ goto ntpdate_okay;
+ }
+ failntpdate("cannot understand ntpdate output");
+
+ ntpdate_okay:
+ gettimeofday(&tv_sys, NULL);
+ ftime_sys = tv_sys.tv_sec;
+ /* ntpdate selects the offset from one of its samples
+ (the one with the shortest round-trip delay?) */
+ ftime_ref = ftime_sys + atof(strstr(buf, "offset") + 6);
+ pclose(ifile);
+ sigma_ref = sqrt(var);
+
+ {
+ time_t now = (time_t)ftime_ref;
+ bdt = *gmtime(&now);
+ printf(" reference time is %s", ctime(&now));
+ printf("reference time - system time = %12.3f - %12.3f "
+ "= %4.3f sec\n",
+ ftime_ref, ftime_sys, ftime_ref - ftime_sys);
+ }
+
+
+#ifdef OWN_IMPLEMENTATION
+ /* this is not even close to working yet */
+ proto = *getprotobyname("UDP");
+ sockfd = socket(AF_INET, SOCK_DGRAM, proto.p_proto);
+ he = *gethostbyname("localhost");
+ len = he.h_length;
+ memcpy(sa.sa_data, he.h_addr_list[0], len);
+
+#ifdef SEND
+ val = connect(sockfd, &sa, len);
+ if (val == -1) {perror("connect"); exit(1);}
+ /*
+ int connect(int sockfd, struct sockaddr *serv_addr, int addrlen );
+ int send(int s, const void *msg, int len , unsigned int flags);
+ int sendto(int s, const void *msg, int len unsigned int
+ flags, const struct sockaddr *to, int tolen);
+ */
+#endif /* SEND */
+ val = sendto(sockfd, (const void *)" ", 1, 0, &sa, len);
+ if (val == -1) {perror("sendto"); exit(1);}
+ sigma_ref = .010;
+#endif /* OWN_IMPLEMENTATION */
+
+ }
+ else /* no absolute time reference */
+ {
+ time_t now;
+ gettimeofday(&tv_sys, NULL);
+ now = (time_t)tv_sys.tv_sec;
+ bdt = *gmtime(&now);
+ ftime_sys = tv_sys.tv_sec + tv_sys.tv_usec*.000001;
+ ftime_ref = 0;
+ sigma_ref = 0;
+ }
+
+ {
+ time_t cmos_time;
+ double system_sec;
+
+ cmos_init ();
+ cmos_read_time (&cmos_time, &system_sec);
+ ftime_cmos = ftime_sys + cmos_time - system_sec;
+ }
+
+ /*
+ -reference-time- --------system-time---------- --cmos-time----
+1997-06-14 20:22 888888888.888 -3 888888888.888 10000 6666666 n 888888888.888 y
+*/
+
+ {
+ struct hack h;
+ h.ref = ftime_ref;
+ h.sigma_ref = sigma_ref;
+ h.log = (time_t)ftime_ref;
+ h.sys = ftime_sys;
+ txc.modes = 0;
+ (void)adjtimex(&txc);
+ h.tick = txc.tick;
+ h.freq = txc.freq;
+ h.sys_ok = valid_system_rate(ftime_sys, ftime_ref, sigma_ref);
+ h.cmos = ftime_cmos;
+ h.cmos_ok = valid_cmos_rate(ftime_cmos, ftime_ref, sigma_ref);
+ puthackent(&h);
+ }
+}
+
+void failntpdate(char *s)
+{
+ fprintf(stderr, "%s\n", s);
+ exit(1);
+}
+
+static
+int valid_system_rate(double ftime_sys, double ftime_ref, double sigma_ref)
+{
+ int n;
+ int default_answer;
+ int ch;
+ char buf[BUFLEN];
+ struct hack *ph;
+ struct cmos_adj *pca = get_cmos_adjustment();
+
+ sethackent();
+ for (n = 0; (ph = gethackent()); n++)
+ prev = *ph; /* fetch last line from logfile */
+ endhackent();
+ if (n == 0)
+ {
+ printf("No previous clock comparison in log file\n");
+ return 0;
+ }
+ undisturbed_sys = undisturbed_cmos = 1;
+
+ printf("Last clock comparison was at %.24s\n", ctime(&prev.log));
+
+ if (txc.tick == prev.tick && txc.freq == prev.freq)
+ printf("Kernel time variables are unchanged - good.\n");
+ else
+ {
+ printf("Kernel time variables have changed - bad.\n");
+ undisturbed_sys = 0;
+ }
+ if (txc.status & 64)
+ printf("System clock is currently not disciplined - good.\n");
+ else
+ {
+ printf("System clock is synchronized (by ntpd?) - bad.\n");
+ undisturbed_sys = 0;
+ }
+
+ {
+ time_t lastboot, newtime;
+ struct utmp *up;
+
+ lastboot = newtime = prev.sys - 1;
+ utmpname(WTMP_PATH);
+ setutent();
+ printf("Checking wtmp file...\n");
+ while((up = getutent()))
+ {
+ if (up->ut_type == BOOT_TIME)
+ lastboot = up->ut_time;
+ if (up->ut_type == NEW_TIME)
+ newtime = up->ut_time;
+ }
+ endutent();
+ if (lastboot < prev.sys)
+ printf("System has not booted since %.24s - good.\n",
+ ctime(&prev.log));
+ else
+ {
+ printf("System was booted at %.24s - bad.\n", ctime(&lastboot));
+ undisturbed_sys = 0;
+ }
+ if (newtime < prev.sys)
+ printf("System time has not been changed since %.24s - good.\n",
+ ctime(&prev.log));
+ else
+ {
+ printf("System time was reset at %.24s - bad.\n", ctime(&newtime));
+ undisturbed_sys = 0;
+ }
+ }
+
+ if (pca)
+ {
+ printf("Checking %s...\n", ADJPATH);
+ if (pca->ca_adj_time < prev.log)
+ printf(
+"/sbin/hwclock has not set system time and adjusted the cmos clock \n"
+"since %.24s - good.\n",
+ctime(&prev.log));
+ else
+ {
+ printf("/sbin/hwclock set system time and adjusted the cmos clock \n"
+ "at %.24s - bad.\n",
+ ctime(&pca->ca_adj_time));
+ undisturbed_sys = undisturbed_cmos = 0;
+ }
+ }
+
+ do
+ {
+ default_answer = undisturbed_sys?'y':'n';
+ printf("\nAre you sure that, since %.24s,\n", ctime(&prev.log));
+ printf(" the system clock has run continuously,\n");
+ printf(" it has not been reset with `date' or `/sbin/hwclock`,\n");
+ printf(" the kernel time variables have not been changed, and\n");
+ printf(" the computer has not been suspended? (y/n) [%c] ",
+ default_answer);
+ fgets(buf, BUFLEN, stdin);
+ ch = buf[0];
+ if (ch == '\n') ch = default_answer;
+ } while (ch != 'n' && ch != 'y');
+
+ if ((undisturbed_sys = (ch == 'y')))
+ {
+ double drift_sys_ppm, err_sys_ppm;
+ int digits;
+ drift_sys_ppm = ((ftime_sys - ftime_ref) - (prev.sys - prev.ref))*
+ 1.e6/(ftime_ref - prev.ref);
+ err_sys_ppm = (prev.sigma_ref + sigma_ref)*1.e6/
+ (ftime_ref - prev.ref);
+ digits = -(int)floor(log(.5*sigma_ref)/log(10.));
+ if (digits < 0) digits = 0;
+
+ printf("The estimated error in system time is %.*f +- %.*f ppm\n",
+ digits, drift_sys_ppm, digits, err_sys_ppm);
+ }
+
+ return undisturbed_sys;
+}
+
+static
+int valid_cmos_rate(double ftime_cmos, double ftime_ref, double sigma_ref)
+{
+ int default_answer;
+ int ch;
+ char buf[BUFLEN];
+
+ default_answer = undisturbed_cmos?'y':'n';
+ do
+ {
+ printf("\nAre you sure that, since %.24s,\n", ctime(&prev.log));
+ printf(" the real time clock (cmos clock) has run continuously,\n");
+ printf(" it has not been reset with `/sbin/hwclock',\n");
+ printf(" no operating system other than Linux has been running, and\n");
+ printf(" ntpd has not been running? (y/n) [%c] ", default_answer);
+ fgets(buf, BUFLEN, stdin);
+ ch = buf[0];
+ if (ch == '\n') ch = default_answer;
+ } while (ch != 'n' && ch != 'y');
+ if ((undisturbed_cmos = (ch == 'y')))
+ {
+ double drift_cmos_ppm, err_cmos_ppm;
+ int digits;
+
+ drift_cmos_ppm =
+ ((ftime_cmos - ftime_ref) - (prev.cmos - prev.ref))*
+ 1.e6/(ftime_ref - prev.ref);
+ err_cmos_ppm = (prev.sigma_ref + sigma_ref)*1.e6/
+ (ftime_ref - prev.ref);
+ digits = -(int)floor(log(.5*err_cmos_ppm)/log(10.));
+ if (digits < 0) digits = 0;
+ printf("The estimated error in the cmos clock is %.*f +- %.*f ppm\n",
+ digits, drift_cmos_ppm, digits, err_cmos_ppm);
+ }
+
+ return undisturbed_cmos;
+}
+
+
+/*
+ * Read informations from /etc/adjtime file.
+ * If file doesn't exist, return default zero values.
+ */
+static struct cmos_adj *get_cmos_adjustment()
+{
+ FILE *adj;
+ static struct cmos_adj ca;
+
+ ca.ca_factor = ca.ca_adj_time = ca.ca_remainder = 0;
+ if ((adj = fopen (ADJPATH, "r")) != NULL)
+ {
+ if (fscanf (adj, "%lf %ld %lf",
+ &ca.ca_factor,
+ &ca.ca_adj_time,
+ &ca.ca_remainder) < 0)
+ {
+ perror (ADJPATH);
+ exit (2);
+ }
+ fclose (adj);
+ }
+#ifdef DEBUG
+ printf ("CMOS clock was last adjusted %s\n", ctime(&ca.ca_adj_time));
+#endif
+ return &ca;
+}
+
+
+static FILE *lfile; /* pointer to log file, or NULL if it
+ has not been opened yet */
+
+static
+void sethackent(void)
+{
+ endhackent();
+ lfile = fopen(log_path, "r");
+ if (!lfile && logging)
+ {
+ lfile = fopen(log_path, "a+"); /* create it if it doesn't exist */
+ if (!lfile)
+ {
+ fprintf(stderr, "%s does not exist, and could not be created\n",
+ log_path);
+ exit(1);
+ }
+ fseek(lfile, 0L, 0); /* start at beginning */
+ }
+}
+
+static
+void endhackent(void)
+{
+ if (lfile) fclose(lfile);
+ lfile = NULL;
+}
+
+/* read next entry in clock comparison log, fill a struct hack from
+ it, and return a pointer to it. Ignore lines starting with `#'.
+ Return NULL when there are no more lines to read. */
+static
+struct hack *gethackent(void)
+{
+ char buf[256], sys_flag, cmos_flag, junk[26];
+ static struct hack h;
+
+ if (!lfile) sethackent();
+ if (!lfile) return NULL;
+ while(fgets(buf, sizeof(buf), lfile))
+ {
+ int tokens;
+ if (buf[0] == '#')
+ continue;
+ tokens = sscanf(buf, "%25s %25s %lf %lf %lf %d %d %c %lf %c",
+ junk, junk, &h.ref, &h.sigma_ref,
+ &h.sys, &h.tick, &h.freq, &sys_flag,
+ &h.cmos, &cmos_flag);
+ if (tokens != 10)
+ continue;
+ h.sys_ok = (tolower(sys_flag) == 'y');
+ h.cmos_ok = (tolower(cmos_flag) == 'y');
+ if (h.ref)
+ h.log = (time_t)h.ref;
+ else if (h.sys)
+ h.log = (time_t)h.sys;
+ else
+ h.log = (time_t)h.cmos;
+ h.valid = 0;
+ return &h;
+ }
+ return NULL;
+}
+
+/* append an entry to the clock comparison log. */
+static
+void puthackent(struct hack *ph)
+{
+ struct tm bdt;
+ char timestring[32];
+ int digits;
+
+ if (ph->sigma_ref)
+ ph->log = (time_t)ph->ref;
+ else
+ ph->log = (time_t)ph->sys;
+ bdt = *gmtime(&ph->log);
+ strftime(timestring, sizeof(timestring), "%Y-%m-%d %H:%M", &bdt);
+ if (ph->sigma_ref <= 0.) digits = 0;
+ else
+ {
+ digits = -(int)floor(log(.5*ph->sigma_ref)/log(10.));
+ if (digits < 0) digits = 0;
+ }
+
+ if (verbose)
+ {
+ fprintf(stdout, "\nlog entry:\n");
+ fprintf(stdout, "%s %.*f %.*f %13.3f %5d %7d %s %13.3f %s\n",
+ timestring,
+ digits, ph->ref, digits, ph->sigma_ref,
+ ph->sys, ph->tick, ph->freq, ph->sys_ok?"y":"n",
+ ph->cmos, ph->cmos_ok?"y":"n");
+ }
+
+ if (!logging)
+ fprintf(stdout, "logging suppressed\n");
+
+ else
+ {
+ lfile = fopen(log_path, "a+");
+ if (!lfile)
+ {
+ fprintf(stderr, "cannot open %s for writing\n", log_path);
+ return;
+ }
+ fprintf(lfile, "%s %.*f %.*f %13.3f %5d %7d %s %13.3f %s\n",
+ timestring,
+ digits, ph->ref, digits, ph->sigma_ref,
+ ph->sys, ph->tick, ph->freq, ph->sys_ok?"y":"n",
+ ph->cmos, ph->cmos_ok?"y":"n");
+ fclose(lfile);
+ lfile = NULL;
+ if (verbose)
+ fprintf(stdout, "written to %s\n", log_path);
+ }
+}
+
+/* convert a broken-down time representing UTC to calendar time
+ representation (time_t), and return it. As a side effect, set the
+ tm_wday and tm_yday members of the broken-down time. (like mktime) */
+static
+time_t mkgmtime(struct tm *tp)
+{
+ time_t lt; /* local time */
+ long adj;
+ struct tm u;
+ static char timezone_name[]="UTC";
+
+ lt = mktime(tp);
+ if (lt == (time_t)(-1))
+ return (time_t)(-1);
+ adj = 131072; /* greater than the number of seconds
+ per day (even when daylight savings
+ time ends) */
+ lt -= adj;
+ while (adj)
+ {
+ lt += adj;
+ u = *gmtime(<);
+ if (compare_tm(&u, tp) > 0)
+ lt -= adj;
+ adj /= 2;
+ }
+ u = *gmtime(<);
+ if (compare_tm(&u, tp))
+ return (time_t)(-1);
+ tzname[0] = tzname[1] = timezone_name;
+ return lt;
+}
+
+static
+int compare_tm(struct tm *first, struct tm *second)
+{
+ if (first->tm_year < second->tm_year) return -1;
+ if (first->tm_year > second->tm_year) return 1;
+ if (first->tm_mon < second->tm_mon) return -1;
+ if (first->tm_mon > second->tm_mon) return 1;
+ if (first->tm_mday < second->tm_mday) return -1;
+ if (first->tm_mday > second->tm_mday) return 1;
+ if (first->tm_hour < second->tm_hour) return -1;
+ if (first->tm_hour > second->tm_hour) return 1;
+ if (first->tm_min < second->tm_min) return -1;
+ if (first->tm_min > second->tm_min) return 1;
+ if (first->tm_sec < second->tm_sec) return -1;
+ if (first->tm_sec > second->tm_sec) return 1;
+ return 0;
+}
+
+static void *xmalloc(int n)
+{ void *p;
+ p = xrealloc(NULL, n);
+ return p;
+}
+
+static void *xrealloc(void *pv, int n)
+{
+ void *p;
+ p = realloc(pv, n);
+ if (!p){perror("adjtimex"); exit(1);}
+ return p;
+}
+
+/*
+ review log file and find least-square estimates of drifts. If
+ "adjusting" is nonzero, set sytem time parameters to the
+ least-squares estimates. */
+static
+void review()
+{
+ int i, n, nmax = 0, digits;
+ struct hack *ph, **hacks = NULL;
+ double diff_ppm, sigma_ppm, cmos_time, sys_time, s0, s1, ref_time;
+ time_t start, finish;
+ char startstring[26], finishstring[26];
+ double x[2], p[4], h[4], z[2], r[4], cmos_var, sys_var, ref_var;
+ long tick_delta = 0;
+ double error_ppm = 0;
+ int hz, tick_min, tick_mid, tick_max;
+ long maxfreq;
+
+ probe_time(&hz, &tick_min, &tick_mid, &tick_max, &maxfreq);
+
+ /* read all the previous time hacks in */
+ sethackent();
+ for (n = 0; (ph = gethackent()); n++)
+ {
+ if (nmax <= n)
+ {
+ hacks = xrealloc(hacks, (nmax = 2*nmax + 4)*sizeof(struct hack *));
+ }
+ hacks[n] = xmalloc(sizeof(struct hack));
+ *hacks[n] = *ph;
+ }
+ endhackent();
+
+ if (n == 0)
+ {
+ printf("No previous clock comparison in log file\n");
+ return;
+ }
+ /*
+ In the following, we assume the reference times are most accurate,
+ then the CMOS clock, then the system clock. Hence, when comparing
+ CMOS and reference times, we're calculating the error in PPM of
+ the CMOS rate, and when comparing system time to either CMOS or
+ reference times, we're calculating error in PPM of the system
+ rate. For system time, we're calculating the error if TICK is set
+ to the middle of the rnage, and FREQ is zero.
+ */
+
+ /* compare cmos and system rates */
+ printf(
+"start finish days sys - cmos (ppm)\n");
+ for (i = 1; i < n; i++)
+ {
+ if (hacks[i]->sys_ok &&
+ hacks[i]->cmos_ok &&
+ hacks[i]->sys > hacks[i-1]->sys &&
+ hacks[i]->cmos > hacks[i-1]->cmos)
+ {
+ sys_time = hacks[i]->sys - hacks[i-1]->sys;
+ cmos_time = hacks[i]->cmos - hacks[i-1]->cmos;
+ hacks[i]->relative_rate =
+ diff_ppm = 1.e6*(sys_time - cmos_time)/sys_time
+ - 100*(hacks[i]->tick - tick_mid) - hacks[i]->freq/SHIFT;
+ if (fabs(diff_ppm) > 10000.) /* agree within 1 percent? */
+ continue;
+ hacks[i]->valid = CMOS_VALID | SYS_VALID;
+ hacks[i]->relative_sigma =
+ sigma_ppm = 1.e6*RTC_JITTER*sqrt(2.)/(sys_time + cmos_time);
+ start = (time_t)hacks[i-1]->sys;
+ strcpy(startstring, ctime(&start));
+ finish = (time_t)hacks[i]->sys;
+ strcpy(finishstring, ctime(&finish));
+ digits = -(int)floor(log(.5*sigma_ppm)/log(10.));
+ if (digits < 0) digits = 0;
+ printf("%.24s %.24s %6.4f %.*f +- %.*f\n",
+ startstring, finishstring, sys_time/SECONDSPERDAY,
+ digits, diff_ppm, digits, sigma_ppm);
+ }
+ }
+
+ /* compare cmos and reference rates */
+ printf(
+"start finish days cmos_error (ppm)\n");
+ for (i = 1; i < n; i++)
+ {
+ if (hacks[i]->sigma_ref != 0 &&
+ hacks[i-1]->sigma_ref != 0 &&
+ hacks[i]->cmos_ok &&
+ hacks[i]->cmos > hacks[i-1]->cmos &&
+ hacks[i]->ref > hacks[i-1]->ref)
+ {
+ ref_time = hacks[i]->ref - hacks[i-1]->ref;
+ cmos_time = hacks[i]->cmos - hacks[i-1]->cmos;
+ hacks[i]->cmos_rate =
+ diff_ppm = 1.e6*(cmos_time - ref_time)/cmos_time;
+ if (fabs(diff_ppm) > 10000.) /* agree within 1 percent? */
+ continue;
+ hacks[i]->valid |= CMOS_VALID | REF_VALID;
+ s0=hacks[i-1]->sigma_ref;
+ s1=hacks[i]->sigma_ref;
+ hacks[i]->cmos_sigma =
+ sigma_ppm = 1.e6*sqrt(s0*s0 + s1*s1)/ref_time;
+ start = (time_t)hacks[i-1]->sys;
+ strcpy(startstring, ctime(&start));
+ finish = (time_t)hacks[i]->sys;
+ strcpy(finishstring, ctime(&finish));
+ digits = -(int)floor(log(.5*sigma_ppm)/log(10.));
+ if (digits < 0) digits = 0;
+ printf("%.24s %.24s %6.4f %1.*f +- %1.*f\n",
+ startstring, finishstring, ref_time/SECONDSPERDAY,
+ digits, diff_ppm, digits, sigma_ppm);
+ }
+ }
+
+ /* compare sys and reference rates */
+ printf(
+"start finish days sys_error (ppm)\n");
+ for (i = 1; i < n; i++)
+ {
+ if (hacks[i]->sigma_ref != 0 &&
+ hacks[i-1]->sigma_ref != 0 &&
+ hacks[i]->sys_ok &&
+ hacks[i]->sys > hacks[i-1]->sys &&
+ hacks[i]->ref > hacks[i-1]->ref)
+ {
+ ref_time = hacks[i]->ref - hacks[i-1]->ref;
+ sys_time = hacks[i]->sys - hacks[i-1]->sys;
+ hacks[i]->sys_rate =
+ diff_ppm = 1.e6*(sys_time - ref_time)/sys_time
+ - 100*(hacks[i]->tick - tick_mid) - hacks[i]->freq/SHIFT;
+ if (fabs(diff_ppm) > 10000.) /* agree within 1 percent? */
+ continue;
+ hacks[i]->valid |= REF_VALID | SYS_VALID;
+ s0=hacks[i-1]->sigma_ref;
+ s1=hacks[i]->sigma_ref;
+ hacks[i]->sys_sigma =
+ sigma_ppm = 1.e6*sqrt(s0*s0 + s1*s1)/ref_time;
+ start = (time_t)hacks[i-1]->sys;
+ strcpy(startstring, ctime(&start));
+ finish = (time_t)hacks[i]->sys;
+ strcpy(finishstring, ctime(&finish));
+ digits = -(int)floor(log(.5*sigma_ppm)/log(10.));
+ if (digits < 0) digits = 0;
+ printf("%.24s %.24s %6.4f %1.*f +- %1.*f\n",
+ startstring, finishstring, ref_time/SECONDSPERDAY,
+ digits, diff_ppm, digits, sigma_ppm);
+ }
+ }
+
+ /* find least-squares solution incorporating all the data */
+
+ p[0] = 1.e10; p[1] = 0.;
+ p[2] = 0.; p[3] = 1.e10;
+ x[0] = 0.; x[1] = 0.;
+
+ for (i = 1; i < n; i++)
+ {
+ switch(hacks[i]->valid)
+ {
+ case 0:
+ break;
+ case (CMOS_VALID | REF_VALID):
+ /* update only the first component of the state (cmos rate) */
+ h[0] = 1.; h[1] = 0.;
+ z[0] = hacks[i]->cmos_rate;
+ r[0] = hacks[i]->cmos_sigma; r[0] *= r[0];
+ kalman_update(x, 2, p, h, z, 1, r);
+ break;
+ case (SYS_VALID | REF_VALID):
+ /* update only the second component of the state (system rate) */
+ h[0] = 0.; h[1] = 1.;
+ z[0] = hacks[i]->sys_rate;
+ r[0] = hacks[i]->sys_sigma; r[0] *= r[0];
+ kalman_update(x, 2, p, h, z, 1, r);
+ break;
+ case (CMOS_VALID | SYS_VALID):
+ /* update the difference between the system and cmos rates */
+ h[0] = -1.; h[1] = 1.;
+ z[0] = hacks[i]->relative_rate;
+ r[0] = hacks[i]->relative_sigma; r[0] *= r[0];
+ kalman_update(x, 2, p, h, z, 1, r);
+ break;
+ case (CMOS_VALID | SYS_VALID | REF_VALID):
+ /* This is the interesting case. We have estimates of the
+ cmos and system rates, but they are highly correlated
+ because they contain the same errors in the reference
+ times. Thus, we know the *difference* between the cmos
+ and system rates much better than we know either of them
+ independently. The r matrix describes the
+ correlation. */
+ h[0] = 1.; h[1] = 0.;
+ h[2] = 0.; h[3] = 1.;
+ ref_var = hacks[i]->cmos_sigma*hacks[i]->cmos_sigma;
+ cmos_var = hacks[i]->relative_sigma; cmos_var *= cmos_var;
+ sys_var = cmos_var;
+ r[0] = ref_var + 2.*cmos_var;
+ r[1] = r[2] = ref_var;
+ r[3] = ref_var + 2.*sys_var;
+ z[0] = hacks[i]->cmos_rate;
+ z[1] = hacks[i]->sys_rate;
+ kalman_update(x, 2, p, h, z, 2, r);
+ break;
+ }
+ }
+
+ sigma_ppm = sqrt(p[0]);
+ digits = -(int)floor(log(.5*sigma_ppm)/log(10.));
+ if (digits < 0) digits = 0;
+ printf("least-squares solution:\n"
+ " cmos_error = %.*f +- %.*f ppm\n",
+ digits, x[0], digits, sigma_ppm);
+ if (sigma_ppm < 100)
+ printf(" suggested adjustment = %6.4f sec/day\n",
+ -x[0]*SECONDSPERDAY/1.e6);
+ else
+ printf(" (no suggestion)\n");
+ {
+ struct cmos_adj *pca = get_cmos_adjustment();
+ printf(" current adjustment = %6.4f sec/day\n",
+ pca->ca_factor);
+ }
+
+ sigma_ppm = sqrt(p[3]);
+ digits = -(int)floor(log(.5*sigma_ppm)/log(10.));
+ if (digits < 0) digits = 0;
+ printf(" sys_error = %.*f +- %.*f ppm\n",
+ digits, x[1], digits, sigma_ppm);
+ if (sigma_ppm < hz)
+ {
+ error_ppm = x[1];
+ if (error_ppm > hz)
+ tick_delta = -(error_ppm + hz/2)/hz;
+ else if (error_ppm < -hz)
+ tick_delta = (-error_ppm + hz/2)/hz;
+ error_ppm += tick_delta*hz;
+ printf(" suggested tick = %5ld freq = %9.0f\n",
+ tick_mid + tick_delta, -error_ppm*SHIFT);
+ if (abs(error_ppm)>500)
+ printf ("WARNING: required correction is greater "
+ "than plus/minus 500 parts per million.\n");
+ }
+ else
+ printf(" (no suggestion)\n");
+ {
+ txc.modes = 0;
+ adjtimex(&txc);
+ printf(" current tick = %5ld freq = %9ld\n",
+ txc.tick, txc.freq );
+ }
+ printf(
+"note: clock variations and unstated data errors may mean that the\n"
+"least squares solution has a bigger error than estimated here\n");
+ if (sigma_ppm < 100 && adjusting)
+ {
+ if (abs(error_ppm)>500)
+ {
+ if (force_adjust)
+ printf (
+"\nWARNING: required correction is greater than plus/minus 500 parts \n"
+"per million, but adjusting anyway per your request.\n");
+ else
+ {
+ printf(
+"\nERROR: required correction is greater than plus/minus 500 parts \n"
+"per million, quitting (use --force-adjust to override).\n");
+ if (resetting)
+ reset_time_status();
+ exit(1);
+ }
+ }
+ txc.modes = ADJ_FREQUENCY | ADJ_TICK;
+ txc.tick = tick_mid + tick_delta;
+ txc.freq = -error_ppm*SHIFT;
+ if (adjtimex (&txc) < 0)
+ {
+ perror ("adjtimex");
+ exit(1);
+ }
+ if (resetting)
+ reset_time_status();
+ printf("new tick = %5ld freq = %7ld\n", txc.tick, txc.freq );
+ }
+
+ for (i = 0; i < n; i++)
+ free(hacks[i]);
+ free(hacks);
+}
+
+/* Perform one update on a discrete linear Kalman filter. z is a
+ measurement related to the state x by
+ z = h x + v
+ where v is the measurement error, normally distributed, with
+ covariance r.
+
+ Because of the size of the temporary arrays, this particular
+ implementation is restricted to 2 states. There are no provisions
+ here for propagating the state or its covariance between updates,
+ because it is not required in this case (i.e. the state transition
+ matrix is a unit matrix). See, for example: Blackman, "Multitarget
+ Tracking with Radar Applications" */
+static
+void kalman_update(double *x, /* state vector */
+ int xr, /* rows in x (must be 1 or 2) */
+ double *p, /* covariance matrix for x (has xr
+ rows and columns) */
+ double *h, /* transforms from state space to
+ measurement space (has zr rows
+ and xr columns) */
+ double *z, /* measurement vector */
+ int zr, /* rows in z (must be 1 or 2) */
+ double *r) /* covariance matrix for z (has zr
+ rows and columns) */
+{
+ static double k[4], num[4], denom[4], v[4], w[4];
+ int pr=xr, pc=xr,
+ hr=zr, hc=xr,
+ rr=zr, rc=zr,
+ kr=xr, kc=zr,
+ nr=xr, nc=zr,
+ dr=zr, dc=zr,
+ vr=xr, vc=1,
+ wr=zr, wc=1;
+
+ /* find the Kalman gain k:
+ k = p h' /(h p h' + r) */
+ mat_mul_nt(p,pr,pc, h,hr,hc, num,nr,nc);
+ mat_similarity(h,hr,hc, p,pr,pc, denom,dr,dc);
+ mat_add(denom,dr,dc, r,rr,rc, denom,dr,dc);
+ if (sym_factor(denom,dr,dc, denom,dr,dc))
+ return; /* failure - singular */
+ sym_rdiv(num,nr,nc, denom,dr,dc, k,kr,kc);
+
+ /* update the state x:
+ x <- x + k (z - h x) */
+ mat_mul(h,hr,hc, x,xr,1, w,wr,wc);
+ mat_sub(z,zr,1, w,wr,wc, w,wr,wc);
+ mat_mul(k,kr,kc, w,wr,wc, v,vr,vc);
+ mat_add(x,xr,1, v,vr,vc, x,xr,1);
+
+ /* update the covariance p:
+ p <- (I - k h) p */
+ mat_one(v,xr,xr);
+ mat_mul(k,kr,kc, h,hr,hc, w,xr,xr);
+ mat_sub(v,xr,xr, w,xr,xr, w,xr,xr);
+ mat_mul(w,xr,xr, p,xr,xr, v,xr,xr);
+ mat_copy(v,xr,xr, p,xr,xr);
+}
Index: create-1.29-patch/adjtimex-1.29-new
===================================================================
--- create-1.29-patch/adjtimex-1.29-new (nonexistent)
+++ create-1.29-patch/adjtimex-1.29-new (revision 5)
Property changes on: create-1.29-patch/adjtimex-1.29-new
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: create-1.29-patch/create.patch.sh
===================================================================
--- create-1.29-patch/create.patch.sh (nonexistent)
+++ create-1.29-patch/create.patch.sh (revision 5)
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+VERSION=1.29
+
+tar --files-from=file.list -xJvf ../adjtimex-$VERSION.tar.xz
+mv adjtimex-$VERSION adjtimex-$VERSION-orig
+
+cp -rf ./adjtimex-$VERSION-new ./adjtimex-$VERSION
+
+diff --unified -Nr adjtimex-$VERSION-orig adjtimex-$VERSION > adjtimex-$VERSION.patch
+
+mv adjtimex-$VERSION.patch ../patches
+
+rm -rf ./adjtimex-$VERSION
+rm -rf ./adjtimex-$VERSION-orig
Property changes on: create-1.29-patch/create.patch.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: create-1.29-patch/file.list
===================================================================
--- create-1.29-patch/file.list (nonexistent)
+++ create-1.29-patch/file.list (revision 5)
@@ -0,0 +1 @@
+adjtimex-1.29/adjtimex.c
Index: create-1.29-patch
===================================================================
--- create-1.29-patch (nonexistent)
+++ create-1.29-patch (revision 5)
Property changes on: create-1.29-patch
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: patches/README
===================================================================
--- patches/README (nonexistent)
+++ patches/README (revision 5)
@@ -0,0 +1,6 @@
+
+/* begin *
+
+ TODO: Leave some comment here.
+
+ * end */
Index: patches
===================================================================
--- patches (nonexistent)
+++ patches (revision 5)
Property changes on: patches
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: .
===================================================================
--- . (nonexistent)
+++ . (revision 5)
Property changes on: .
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Radix cross Linux
The main Radix cross Linux repository contains the build scripts of packages, which have the most complete and common functionality for desktop machines
452 Commits
2 Branches
1 Tag