Radix cross Linux

Index: Makefile.lib
===================================================================
--- Makefile.lib	(nonexistent)
+++ Makefile.lib	(revision 217)
@@ -0,0 +1,608 @@
+# SPDX-License-Identifier: GPL-2.0
+# Backward compatibility
+asflags-y  += $(EXTRA_AFLAGS)
+ccflags-y  += $(EXTRA_CFLAGS)
+cppflags-y += $(EXTRA_CPPFLAGS)
+ldflags-y  += $(EXTRA_LDFLAGS)
+
+#
+# flags that take effect in sub directories
+export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y)
+export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y)
+
+# Figure out what we need to build from the various variables
+# ===========================================================================
+
+# When an object is listed to be built compiled-in and modular,
+# only build the compiled-in version
+
+obj-m := $(filter-out $(obj-y),$(obj-m))
+
+# Libraries are always collected in one lib file.
+# Filter out objects already built-in
+
+lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))
+
+
+# Handle objects in subdirs
+# ---------------------------------------------------------------------------
+# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o
+#   and add the directory to the list of dirs to descend into: $(subdir-y)
+# o if we encounter foo/ in $(obj-m), remove it from $(obj-m)
+#   and add the directory to the list of dirs to descend into: $(subdir-m)
+
+# Determine modorder.
+# Unfortunately, we don't have information about ordering between -y
+# and -m subdirs.  Just put -y's first.
+modorder	:= $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko))
+
+__subdir-y	:= $(patsubst %/,%,$(filter %/, $(obj-y)))
+subdir-y	+= $(__subdir-y)
+__subdir-m	:= $(patsubst %/,%,$(filter %/, $(obj-m)))
+subdir-m	+= $(__subdir-m)
+obj-y		:= $(patsubst %/, %/built-in.o, $(obj-y))
+obj-m		:= $(filter-out %/, $(obj-m))
+
+# Subdirectories we need to descend into
+
+subdir-ym	:= $(sort $(subdir-y) $(subdir-m))
+
+# if $(foo-objs) exists, foo.o is a composite object
+multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
+multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
+multi-used   := $(multi-used-y) $(multi-used-m)
+single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))
+
+# Build list of the parts of our composite objects, our composite
+# objects depend on those (obviously)
+multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y)))
+multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y)))
+
+# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
+# tell kbuild to descend
+subdir-obj-y := $(filter %/built-in.o, $(obj-y))
+
+# Replace multi-part objects by their individual parts, look at local dir only
+real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
+real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
+
+# Add subdir path
+
+extra-y		:= $(addprefix $(obj)/,$(extra-y))
+always		:= $(addprefix $(obj)/,$(always))
+targets		:= $(addprefix $(obj)/,$(targets))
+modorder	:= $(addprefix $(obj)/,$(modorder))
+obj-y		:= $(addprefix $(obj)/,$(obj-y))
+obj-m		:= $(addprefix $(obj)/,$(obj-m))
+lib-y		:= $(addprefix $(obj)/,$(lib-y))
+subdir-obj-y	:= $(addprefix $(obj)/,$(subdir-obj-y))
+real-objs-y	:= $(addprefix $(obj)/,$(real-objs-y))
+real-objs-m	:= $(addprefix $(obj)/,$(real-objs-m))
+single-used-m	:= $(addprefix $(obj)/,$(single-used-m))
+multi-used-y	:= $(addprefix $(obj)/,$(multi-used-y))
+multi-used-m	:= $(addprefix $(obj)/,$(multi-used-m))
+multi-objs-y	:= $(addprefix $(obj)/,$(multi-objs-y))
+multi-objs-m	:= $(addprefix $(obj)/,$(multi-objs-m))
+subdir-ym	:= $(addprefix $(obj)/,$(subdir-ym))
+
+# These flags are needed for modversions and compiling, so we define them here
+# already
+# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will
+# end up in (or would, if it gets compiled in)
+# Note: Files that end up in two or more modules are compiled without the
+#       KBUILD_MODNAME definition. The reason is that any made-up name would
+#       differ in different configs.
+name-fix = $(squote)$(quote)$(subst $(comma),_,$(subst -,_,$1))$(quote)$(squote)
+basename_flags = -DKBUILD_BASENAME=$(call name-fix,$(basetarget))
+modname_flags  = $(if $(filter 1,$(words $(modname))),\
+                 -DKBUILD_MODNAME=$(call name-fix,$(modname)))
+
+orig_c_flags   = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
+                 $(ccflags-y) $(CFLAGS_$(basetarget).o)
+_c_flags       = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
+orig_a_flags   = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \
+                 $(asflags-y) $(AFLAGS_$(basetarget).o)
+_a_flags       = $(filter-out $(AFLAGS_REMOVE_$(basetarget).o), $(orig_a_flags))
+_cpp_flags     = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
+
+#
+# Enable gcov profiling flags for a file, directory or for all files depending
+# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
+# (in this order)
+#
+ifeq ($(CONFIG_GCOV_KERNEL),y)
+_c_flags += $(if $(patsubst n%,, \
+		$(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
+		$(CFLAGS_GCOV))
+endif
+
+#
+# Enable address sanitizer flags for kernel except some files or directories
+# we don't want to check (depends on variables KASAN_SANITIZE_obj.o, KASAN_SANITIZE)
+#
+ifeq ($(CONFIG_KASAN),y)
+_c_flags += $(if $(patsubst n%,, \
+		$(KASAN_SANITIZE_$(basetarget).o)$(KASAN_SANITIZE)y), \
+		$(CFLAGS_KASAN))
+endif
+
+# If building the kernel in a separate objtree expand all occurrences
+# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').
+
+ifeq ($(KBUILD_SRC),)
+__c_flags	= $(_c_flags)
+__a_flags	= $(_a_flags)
+__cpp_flags     = $(_cpp_flags)
+else
+
+# -I$(obj) locates generated .h files
+# $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files
+#   and locates generated .h files
+# FIXME: Replace both with specific CFLAGS* statements in the makefiles
+__c_flags	= $(if $(obj),$(call addtree,-I$(src)) -I$(obj)) \
+		  $(call flags,_c_flags)
+__a_flags	= $(call flags,_a_flags)
+__cpp_flags     = $(call flags,_cpp_flags)
+endif
+
+# Modified for U-Boot: LINUXINCLUDE -> UBOOTINCLUDE
+c_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE)     \
+		 $(__c_flags) $(modkern_cflags)                           \
+		 $(basename_flags) $(modname_flags)
+
+a_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE)     \
+		 $(__a_flags) $(modkern_aflags)
+
+cpp_flags      = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE)     \
+		 $(__cpp_flags)
+
+ld_flags       = $(KBUILD_LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F))
+
+# Try these files in order to find the U-Boot-specific .dtsi include file
+u_boot_dtsi_options = $(strip $(wildcard $(dir $<)$(basename $(notdir $<))-u-boot.dtsi) \
+	$(wildcard $(dir $<)$(subst $\",,$(CONFIG_SYS_SOC))-u-boot.dtsi) \
+	$(wildcard $(dir $<)$(subst $\",,$(CONFIG_SYS_CPU))-u-boot.dtsi) \
+	$(wildcard $(dir $<)$(subst $\",,$(CONFIG_SYS_VENDOR))-u-boot.dtsi) \
+	$(wildcard $(dir $<)u-boot.dtsi))
+
+u_boot_dtsi_options_raw = $(warning Automatic .dtsi inclusion: options: \
+	$(dir $<)$(basename $(notdir $<))-u-boot.dtsi \
+	$(dir $<)$(subst $\",,$(CONFIG_SYS_SOC))-u-boot.dtsi \
+	$(dir $<)$(subst $\",,$(CONFIG_SYS_CPU))-u-boot.dtsi \
+	$(dir $<)$(subst $\",,$(CONFIG_SYS_VENDOR))-u-boot.dtsi \
+	$(dir $<)u-boot.dtsi ... \
+	found: $(if $(u_boot_dtsi_options),"$(u_boot_dtsi_options)",nothing!))
+
+# Uncomment for debugging
+# This shows all the files that were considered and the one that we chose.
+# u_boot_dtsi_options_debug = $(u_boot_dtsi_options_raw)
+
+# We use the first match
+u_boot_dtsi = $(strip $(u_boot_dtsi_options_debug) \
+	$(notdir $(firstword $(u_boot_dtsi_options))))
+
+# Modified for U-Boot
+dtc_cpp_flags  = -Wp,-MD,$(depfile).pre.tmp -nostdinc                    \
+		 -I$(srctree)/arch/$(ARCH)/dts                           \
+		 -I$(srctree)/arch/$(ARCH)/dts/include                   \
+		 -Iinclude                                               \
+		 -I$(srctree)/include                                    \
+		 -I$(srctree)/arch/$(ARCH)/include                       \
+		 -include $(srctree)/include/linux/kconfig.h             \
+		 -D__ASSEMBLY__                                          \
+		 -undef -D__DTS__
+
+# Finds the multi-part object the current object will be linked into
+modname-multi = $(sort $(foreach m,$(multi-used),\
+		$(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=))))
+
+# Useful for describing the dependency of composite objects
+# Usage:
+#   $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add)
+define multi_depend
+$(foreach m, $(notdir $1), \
+	$(eval $(obj)/$m: \
+	$(addprefix $(obj)/, $(foreach s, $3, $($(m:%$(strip $2)=%$(s)))))))
+endef
+
+# LEX
+# ---------------------------------------------------------------------------
+quiet_cmd_flex = LEX     $@
+      cmd_flex = $(LEX) -o$@ -L $<
+
+$(obj)/%.lex.c: $(src)/%.l FORCE
+	$(call if_changed,flex)
+
+# YACC
+# ---------------------------------------------------------------------------
+quiet_cmd_bison = YACC    $@
+      cmd_bison = $(YACC) -o$@ -t -l $<
+
+$(obj)/%.tab.c: $(src)/%.y FORCE
+	$(call if_changed,bison)
+
+quiet_cmd_bison_h = YACC    $@
+      cmd_bison_h = $(YACC) -o/dev/null --defines=$@ -t -l $<
+
+$(obj)/%.tab.h: $(src)/%.y FORCE
+	$(call if_changed,bison_h)
+
+# Shipped files
+# ===========================================================================
+
+quiet_cmd_shipped = SHIPPED $@
+cmd_shipped = cat $< > $@
+
+$(obj)/%: $(src)/%_shipped
+	$(call cmd,shipped)
+
+# Commands useful for building a boot image
+# ===========================================================================
+#
+#	Use as following:
+#
+#	target: source(s) FORCE
+#		$(if_changed,ld/objcopy/gzip)
+#
+#	and add target to extra-y so that we know we have to
+#	read in the saved command line
+
+# Linking
+# ---------------------------------------------------------------------------
+
+quiet_cmd_ld = LD      $@
+cmd_ld = $(LD) $(ld_flags) $(filter-out FORCE,$^) -o $@
+
+# Objcopy
+# ---------------------------------------------------------------------------
+
+quiet_cmd_objcopy = OBJCOPY $@
+cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
+
+# Gzip
+# ---------------------------------------------------------------------------
+
+quiet_cmd_gzip = GZIP    $@
+cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@) || \
+	(rm -f $@ ; false)
+
+# DTC
+# ---------------------------------------------------------------------------
+
+# Disable noisy checks by default
+ifeq ($(findstring 1,$(KBUILD_ENABLE_EXTRA_GCC_CHECKS)),)
+DTC_FLAGS += -Wno-unit_address_vs_reg \
+	-Wno-unit_address_format \
+	-Wno-avoid_unnecessary_addr_size \
+	-Wno-alias_paths \
+	-Wno-graph_child_address \
+	-Wno-graph_port \
+	-Wno-unique_unit_address \
+	-Wno-simple_bus_reg \
+	-Wno-pci_device_reg
+
+# U-Boot specific disables
+DTC_FLAGS += -Wno-pci_bridge \
+        -Wno-pci_device_bus_num
+endif
+
+ifneq ($(findstring 2,$(KBUILD_ENABLE_EXTRA_GCC_CHECKS)),)
+DTC_FLAGS += -Wnode_name_chars_strict \
+	-Wproperty_name_chars_strict
+endif
+
+DTC_FLAGS += $(DTC_FLAGS_$(basetarget))
+
+# Generate an assembly file to wrap the output of the device tree compiler
+quiet_cmd_dt_S_dtb= DTB     $@
+# Modified for U-Boot
+cmd_dt_S_dtb=						\
+(							\
+	echo '.section .dtb.init.rodata,"a"';		\
+	echo '.balign 16';				\
+	echo '.global __dtb_$(subst -,_,$(*F))_begin';	\
+	echo '__dtb_$(subst -,_,$(*F))_begin:';		\
+	echo '.incbin "$<" ';				\
+	echo '__dtb_$(subst -,_,$(*F))_end:';		\
+	echo '.global __dtb_$(subst -,_,$(*F))_end';	\
+	echo '.balign 16';				\
+) > $@
+
+$(obj)/%.dtb.S: $(obj)/%.dtb
+	$(call cmd,dt_S_dtb)
+
+ifeq ($(CONFIG_OF_LIBFDT_OVERLAY),y)
+DTC_FLAGS += -@
+endif
+
+quiet_cmd_dtc = DTC     $@
+# Modified for U-Boot
+# Bring in any U-Boot-specific include at the end of the file
+cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
+	(cat $<; $(if $(u_boot_dtsi),echo '$(pound)include "$(u_boot_dtsi)"')) > $(pre-tmp); \
+	$(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $(pre-tmp) ; \
+	$(DTC) -O dtb -o $@ -b 0 \
+		-i $(dir $<) $(DTC_FLAGS) \
+		-d $(depfile).dtc.tmp $(dtc-tmp) || \
+		(echo "Check $(shell pwd)/$(pre-tmp) for errors" && false) \
+		; \
+	sed "s:$(pre-tmp):$(<):" $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
+
+$(obj)/%.dtb: $(src)/%.dts FORCE
+	$(call if_changed_dep,dtc)
+
+pre-tmp = $(subst $(comma),_,$(dot-target).pre.tmp)
+dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
+
+# DTCO
+# ---------------------------------------------------------------------------
+
+quiet_cmd_dtco = DTCO    $@
+# Rule for objects only; does not put specific u-boot include at the end
+# No generation of assembly file either
+# Modified for U-Boot
+cmd_dtco = mkdir -p $(dir ${dtc-tmp}) ; \
+	$(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
+	$(DTC) -@ -O dtb -o $@ -b 0 \
+		-i $(dir $<) $(DTC_FLAGS) \
+		-d $(depfile).dtc.tmp $(dtc-tmp) ; \
+	cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
+
+$(obj)/%.dtbo: $(src)/%.dts FORCE
+	$(call if_changed_dep,dtco)
+
+# Fonts
+# ---------------------------------------------------------------------------
+
+# Generate an assembly file to wrap the font data
+quiet_cmd_S_ttf= TTF     $@
+# Modified for U-Boot
+cmd_S_ttf=						\
+(							\
+	echo '.section .rodata.ttf.init,"a"';		\
+	echo '.balign 16';				\
+	echo '.global __ttf_$(*F)_begin';		\
+	echo '__ttf_$(*F)_begin:';			\
+	echo '.incbin "$<" ';				\
+	echo '__ttf_$(*F)_end:';			\
+	echo '.global __ttf_$(*F)_end';			\
+	echo '.balign 16';				\
+) > $@
+
+$(obj)/%.S: $(src)/%.ttf
+	$(call cmd,S_ttf)
+
+# EFI applications
+# A Makefile target *.efi is built as EFI application.
+# A Makefile target *_efi.S wraps *.efi as built-in EFI application.
+# ---------------------------------------------------------------------------
+
+# Generate an assembly file to wrap the EFI app
+cmd_S_efi=					\
+(						\
+	echo '.section .rodata.$*.init,"a"';	\
+	echo '.balign 16';			\
+	echo '.global __efi_$*_begin';		\
+	echo '__efi_$*_begin:';			\
+	echo '.incbin "$<" ';			\
+	echo '__efi_$*_end:';			\
+	echo '.global __efi_$*_end';		\
+	echo '.balign 16';			\
+) > $@
+
+$(obj)/%_efi.S: $(obj)/%.efi
+	$(call cmd,S_efi)
+
+quiet_cmd_efi_objcopy = OBJCOPY $@
+cmd_efi_objcopy = $(OBJCOPY) -j .header -j .text -j .sdata -j .data -j \
+		.dynamic -j .dynsym  -j .rel* -j .rela* -j .reloc \
+		$(if $(EFI_TARGET),$(EFI_TARGET),-O binary) $^ $@
+
+$(obj)/%.efi: $(obj)/%_efi.so
+	$(call cmd,efi_objcopy)
+
+KBUILD_EFILDFLAGS  = -nostdlib -znocombreloc
+KBUILD_EFILDFLAGS += $(call ld-option,--no-warn-rwx-segments)
+quiet_cmd_efi_ld = LD      $@
+cmd_efi_ld = $(LD) $(KBUILD_EFILDFLAGS) -T $(EFI_LDS_PATH) -shared \
+		-Bsymbolic -s $^ -o $@
+
+EFI_LDS_PATH = $(srctree)/arch/$(ARCH)/lib/$(EFI_LDS)
+
+$(obj)/efi_crt0.o: $(srctree)/arch/$(ARCH)/lib/$(EFI_CRT0:.o=.S) FORCE
+	$(call if_changed_dep,as_o_S)
+
+$(obj)/efi_reloc.o: $(srctree)/arch/$(ARCH)/lib/$(EFI_RELOC:.o=.c) $(recordmcount_source) FORCE
+	$(call cmd,force_checksrc)
+	$(call if_changed_rule,cc_o_c)
+
+$(obj)/%_efi.so: $(obj)/%.o $(obj)/efi_crt0.o $(obj)/efi_reloc.o $(obj)/efi_freestanding.o
+	$(call cmd,efi_ld)
+
+targets += $(obj)/efi_crt0.o $(obj)/efi_reloc.o $(obj)/efi_freestanding.o
+
+CFLAGS_REMOVE_efi_reloc.o := $(LTO_CFLAGS)
+CFLAGS_REMOVE_efi_freestanding.o := $(LTO_CFLAGS)
+
+# ACPI
+# ---------------------------------------------------------------------------
+#
+# This first sends the file (typically dsdt.asl) through the preprocessor
+# resolve includes and any CONFIG options used. This produces dsdt.asl.tmp
+# which is pure ASL code. The Intel ASL (ACPI (Advanced Configuration and Power
+# Interface) Source Language compiler (iasl) then converts this ASL code into a
+# C file containing the hex data to build into U-Boot. This file is called
+# dsdt.hex (despite us setting the prefix to .../dsdt.asl.tmp) so must be
+# renamed to dsdt.c for consumption by the build system.
+ASL_TMP = $(patsubst %.c,%.asl.tmp,$@)
+
+quiet_cmd_acpi_c_asl= ASL     $<
+cmd_acpi_c_asl=         \
+	$(CPP) -x assembler-with-cpp -D__ASSEMBLY__ -D__ACPI__ \
+		-P $(UBOOTINCLUDE) -o $(ASL_TMP) $< && \
+	iasl -p $@ -tc $(ASL_TMP) $(if $(KBUILD_VERBOSE:1=), >/dev/null) && \
+	mv $(patsubst %.c,%.hex,$@) $@
+
+$(obj)/dsdt.c:    $(src)/dsdt.asl
+	$(call cmd,acpi_c_asl)
+	$(Q)sed -i -e "s,dsdt_aml_code,AmlCode," $@
+
+# Bzip2
+# ---------------------------------------------------------------------------
+
+# Bzip2 and LZMA do not include size in file... so we have to fake that;
+# append the size as a 32-bit littleendian number as gzip does.
+size_append = printf $(shell						\
+dec_size=0;								\
+for F in $1; do								\
+	fsize=$$(stat -c "%s" $$F);					\
+	dec_size=$$(expr $$dec_size + $$fsize);				\
+done;									\
+printf "%08x\n" $$dec_size |						\
+	sed 's/\(..\)/\1 /g' | {					\
+		read ch0 ch1 ch2 ch3;					\
+		for ch in $$ch3 $$ch2 $$ch1 $$ch0; do			\
+			printf '%s%03o' '\\' $$((0x$$ch)); 		\
+		done;							\
+	}								\
+)
+
+quiet_cmd_bzip2 = BZIP2   $@
+cmd_bzip2 = (cat $(filter-out FORCE,$^) | \
+	bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+	(rm -f $@ ; false)
+
+# Lzma
+# ---------------------------------------------------------------------------
+
+quiet_cmd_lzma = LZMA    $@
+cmd_lzma = (cat $(filter-out FORCE,$^) | \
+	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+	(rm -f $@ ; false)
+
+quiet_cmd_lzo = LZO     $@
+cmd_lzo = (cat $(filter-out FORCE,$^) | \
+	lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+	(rm -f $@ ; false)
+
+quiet_cmd_lz4 = LZ4     $@
+cmd_lz4 = (cat $(filter-out FORCE,$^) | \
+	lz4c -l -c1 stdin stdout && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+	(rm -f $@ ; false)
+
+# U-Boot mkimage
+# ---------------------------------------------------------------------------
+
+MKIMAGE := $(srctree)/scripts/mkuboot.sh
+
+# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces
+# the number of overrides in arch makefiles
+UIMAGE_ARCH ?= $(SRCARCH)
+UIMAGE_COMPRESSION ?= $(if $(2),$(2),none)
+UIMAGE_OPTS-y ?=
+UIMAGE_TYPE ?= kernel
+UIMAGE_LOADADDR ?= arch_must_set_this
+UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR)
+UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)'
+UIMAGE_IN ?= $<
+UIMAGE_OUT ?= $@
+
+quiet_cmd_uimage = UIMAGE  $(UIMAGE_OUT)
+      cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \
+			-C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \
+			-T $(UIMAGE_TYPE) \
+			-a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \
+			-n $(UIMAGE_NAME) -d $(UIMAGE_IN) $(UIMAGE_OUT)
+
+# XZ
+# ---------------------------------------------------------------------------
+# Use xzkern to compress the kernel image and xzmisc to compress other things.
+#
+# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage
+# of the kernel decompressor. A BCJ filter is used if it is available for
+# the target architecture. xzkern also appends uncompressed size of the data
+# using size_append. The .xz format has the size information available at
+# the end of the file too, but it's in more complex format and it's good to
+# avoid changing the part of the boot code that reads the uncompressed size.
+# Note that the bytes added by size_append will make the xz tool think that
+# the file is corrupt. This is expected.
+#
+# xzmisc doesn't use size_append, so it can be used to create normal .xz
+# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very
+# big dictionary would increase the memory usage too much in the multi-call
+# decompression mode. A BCJ filter isn't used either.
+quiet_cmd_xzkern = XZKERN  $@
+cmd_xzkern = (cat $(filter-out FORCE,$^) | \
+	sh $(srctree)/scripts/xz_wrap.sh && \
+	$(call size_append, $(filter-out FORCE,$^))) > $@ || \
+	(rm -f $@ ; false)
+
+quiet_cmd_xzmisc = XZMISC  $@
+cmd_xzmisc = (cat $(filter-out FORCE,$^) | \
+	xz --check=crc32 --lzma2=dict=1MiB) > $@ || \
+	(rm -f $@ ; false)
+
+# Additional commands for U-Boot
+#
+# mkimage
+# ---------------------------------------------------------------------------
+MKIMAGEOUTPUT ?= /dev/null
+quiet_cmd_mkimage = MKIMAGE $@
+cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
+	>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
+
+# fdtgrep
+# ---------------------------------------------------------------------------
+# Pass the original device tree file through fdtgrep twice. The first pass
+# removes any unwanted nodes (i.e. those which don't have the
+# 'u-boot,dm-pre-reloc' property and thus are not needed by SPL. The second
+# pass removes various unused properties from the remaining nodes.
+# The output is typically a much smaller device tree file.
+ifeq ($(CONFIG_TPL_BUILD),y)
+fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-tpl
+else
+fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-spl
+endif
+quiet_cmd_fdtgrep = FDTGREP $@
+      cmd_fdtgrep = $(objtree)/tools/fdtgrep $(fdtgrep_props) -RT $< \
+		-n /chosen -n /config -O dtb | \
+	$(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
+		-P u-boot,dm-pre-reloc -P u-boot,dm-spl -P u-boot,dm-tpl \
+		$(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS)))
+
+# fdt_rm_props
+# ---------------------------------------------------------------------------
+# Pass the original device tree file through fdtgrep. This removes various
+# unused properties. The output is typically a smaller device tree file.
+quiet_cmd_fdt_rm_props = FDTGREP $@
+	cmd_fdt_rm_props = cat $< | $(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
+			$(addprefix -P ,$(subst $\",,$(CONFIG_OF_REMOVE_PROPS)))
+
+# ASM offsets
+# ---------------------------------------------------------------------------
+
+# Default sed regexp - multiline due to syntax constraints
+define sed-offsets
+	"s:[[:space:]]*\.ascii[[:space:]]*\"\(.*\)\":\1:; \
+	/^->/{s:->#\(.*\):/* \1 */:; \
+	s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \
+	s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
+	s:->::; p;}"
+endef
+
+# Use filechk to avoid rebuilds when a header changes, but the resulting file
+# does not
+define filechk_offsets
+	(set -e; \
+	 echo "#ifndef $2"; \
+	 echo "#define $2"; \
+	 echo "/*"; \
+	 echo " * DO NOT MODIFY."; \
+	 echo " *"; \
+	 echo " * This file was generated by Kbuild"; \
+	 echo " */"; \
+	 echo ""; \
+	 sed -ne $(sed-offsets); \
+	 echo ""; \
+	 echo "#endif" )
+endef
Index: Makefile.spl
===================================================================
--- Makefile.spl	(nonexistent)
+++ Makefile.spl	(revision 217)
@@ -0,0 +1,585 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2011
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2011
+# Daniel Schwierzeck, daniel.schwierzeck@googlemail.com.
+#
+# (C) Copyright 2011
+# Texas Instruments Incorporated - http://www.ti.com/
+# Aneesh V <aneesh@ti.com>
+# Based on top-level Makefile.
+#
+
+src := $(obj)
+
+# Create output directory if not already present
+_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
+
+include $(srctree)/scripts/Kbuild.include
+
+-include include/config/auto.conf
+-include $(obj)/include/autoconf.mk
+
+UBOOTINCLUDE := -I$(obj)/include $(UBOOTINCLUDE)
+
+KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD
+ifeq ($(CONFIG_TPL_BUILD),y)
+KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD
+endif
+
+ifeq ($(CONFIG_TPL_BUILD),y)
+SPL_BIN := u-boot-tpl
+SPL_NAME := tpl
+else
+SPL_BIN := u-boot-spl
+SPL_NAME := spl
+endif
+
+export SPL_NAME
+
+ifdef CONFIG_SPL_BUILD
+SPL_ := SPL_
+ifeq ($(CONFIG_TPL_BUILD),y)
+SPL_TPL_ := TPL_
+else
+SPL_TPL_ := SPL_
+endif
+else
+SPL_ :=
+SPL_TPL_ :=
+endif
+
+ifeq ($(obj)$(CONFIG_SUPPORT_SPL),spl)
+$(error You cannot build SPL without enabling CONFIG_SUPPORT_SPL)
+endif
+ifeq ($(obj)$(CONFIG_SUPPORT_TPL),tpl)
+$(error You cannot build TPL without enabling CONFIG_SUPPORT_TPL)
+endif
+
+include $(srctree)/config.mk
+include $(srctree)/arch/$(ARCH)/Makefile
+
+include $(srctree)/scripts/Makefile.lib
+
+# Enable garbage collection of un-used sections for SPL
+KBUILD_CFLAGS += -ffunction-sections -fdata-sections
+LDFLAGS_FINAL += --gc-sections
+
+ifeq ($(CONFIG_$(SPL_TPL_)STACKPROTECTOR),y)
+KBUILD_CFLAGS += -fstack-protector-strong
+else
+KBUILD_CFLAGS += -fno-stack-protector
+endif
+
+# FIX ME
+cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
+							$(NOSTDINC_FLAGS)
+c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
+
+HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
+
+libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
+libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
+
+ifeq ($(CONFIG_TPL_BUILD),y)
+libs-$(CONFIG_TPL_FRAMEWORK) += common/spl/
+else
+libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
+endif
+libs-y += common/init/
+
+# Special handling for a few options which support SPL/TPL
+ifeq ($(CONFIG_TPL_BUILD),y)
+libs-$(CONFIG_TPL_LIBCOMMON_SUPPORT) += common/ cmd/ env/
+libs-$(CONFIG_TPL_LIBGENERIC_SUPPORT) += lib/
+else
+libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/ env/
+libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
+ifdef CONFIG_SPL_FRAMEWORK
+libs-$(CONFIG_PARTITIONS) += disk/
+endif
+endif
+
+libs-y += drivers/
+libs-$(CONFIG_SPL_USB_GADGET) += drivers/usb/dwc3/
+libs-$(CONFIG_SPL_USB_GADGET) += drivers/usb/cdns3/
+libs-y += dts/
+libs-y += fs/
+libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
+libs-$(CONFIG_SPL_NET_SUPPORT) += net/
+libs-$(CONFIG_SPL_UNIT_TEST) += test/
+
+head-y		:= $(addprefix $(obj)/,$(head-y))
+libs-y		:= $(addprefix $(obj)/,$(libs-y))
+u-boot-spl-dirs	:= $(patsubst %/,%,$(filter %/, $(libs-y)))
+
+libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
+
+# Add GCC lib
+ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
+PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
+PLATFORM_LIBS := $(filter-out %/lib.a, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC)
+endif
+
+u-boot-spl-init := $(head-y)
+u-boot-spl-main := $(libs-y)
+ifdef CONFIG_$(SPL_TPL_)OF_PLATDATA
+platdata-hdr := include/generated/dt-structs-gen.h include/generated/dt-decl.h
+platdata-inst := $(obj)/dts/dt-uclass.o $(obj)/dts/dt-device.o
+platdata-noinst := $(obj)/dts/dt-plat.o
+
+ifdef CONFIG_$(SPL_TPL_)OF_PLATDATA_INST
+u-boot-spl-platdata := $(platdata-inst)
+u-boot-spl-old-platdata := $(platdata-noinst)
+else
+u-boot-spl-platdata := $(platdata-noinst)
+u-boot-spl-old-platdata := $(platdata-inst)
+endif
+
+# Files we need to generate
+u-boot-spl-platdata_c := $(patsubst %.o,%.c,$(u-boot-spl-platdata))
+
+# Files we won't generate and should remove
+u-boot-spl-old-platdata_c := $(patsubst %.o,%.c,$(u-boot-spl-old-platdata))
+endif  # OF_PLATDATA
+
+# Linker Script
+# First test whether there's a linker-script for the specific stage defined...
+ifneq ($(CONFIG_$(SPL_TPL_)LDSCRIPT),)
+# need to strip off double quotes
+LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_$(SPL_TPL_)LDSCRIPT:"%"=%))
+else
+# ...then fall back to the generic SPL linker-script
+ifneq ($(CONFIG_SPL_LDSCRIPT),)
+# need to strip off double quotes
+LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%))
+endif
+endif
+
+ifeq ($(wildcard $(LDSCRIPT)),)
+	LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds
+endif
+ifeq ($(wildcard $(LDSCRIPT)),)
+	LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-spl.lds
+endif
+ifeq ($(wildcard $(LDSCRIPT)),)
+	LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot-spl.lds
+endif
+ifeq ($(wildcard $(LDSCRIPT)),)
+$(error could not find linker script)
+endif
+
+# Special flags for CPP when processing the linker script.
+# Pass the version down so we can handle backwards compatibility
+# on the fly.
+LDPPFLAGS += \
+	-include $(srctree)/include/u-boot/u-boot.lds.h \
+	-include $(objtree)/include/config.h \
+	-DCPUDIR=$(CPUDIR) \
+	$(shell $(LD) --version | \
+	  sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
+
+# Turn various CONFIG symbols into IMAGE symbols for easy reuse of
+# the scripts between SPL and TPL.
+ifneq ($(CONFIG_$(SPL_TPL_)MAX_SIZE),)
+LDPPFLAGS += -DIMAGE_MAX_SIZE=$(CONFIG_$(SPL_TPL_)MAX_SIZE)
+endif
+ifneq ($(CONFIG_$(SPL_TPL_)TEXT_BASE),)
+LDPPFLAGS += -DIMAGE_TEXT_BASE=$(CONFIG_$(SPL_TPL_)TEXT_BASE)
+endif
+
+MKIMAGEOUTPUT ?= /dev/null
+
+quiet_cmd_mkimage = MKIMAGE $@
+cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
+	>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
+
+quiet_cmd_mkfitimage = MKIMAGE $@
+cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(SPL_ITS) -E $@ \
+	$(if $(KBUILD_VERBOSE:1=), MKIMAGEOUTPUT)
+
+MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE)
+
+MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE)
+
+MLO MLO.byteswap: $(obj)/u-boot-spl.bin FORCE
+	$(call if_changed,mkimage)
+
+ifeq ($(CONFIG_SYS_SOC),"at91")
+MKIMAGEFLAGS_boot.bin = -T atmelimage
+
+ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y)
+MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params)
+
+$(obj)/boot.bin: $(obj)/../tools/atmel_pmecc_params
+endif
+
+$(obj)/boot.bin: $(obj)/u-boot-spl.bin FORCE
+	$(call if_changed,mkimage)
+else
+ifdef CONFIG_ARCH_ZYNQ
+MKIMAGEFLAGS_boot.bin = -T zynqimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE)
+endif
+ifdef CONFIG_ARCH_ZYNQMP
+ifneq ($(CONFIG_PMUFW_INIT_FILE),"")
+spl/boot.bin: zynqmp-check-pmufw
+zynqmp-check-pmufw: FORCE
+	( cd $(srctree) && test -r $(CONFIG_PMUFW_INIT_FILE) ) \
+		|| ( echo "Cannot read $(CONFIG_PMUFW_INIT_FILE)" && false )
+endif
+MKIMAGEFLAGS_boot.bin = -T zynqmpimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE) \
+	-n "$(shell cd $(srctree); readlink -f $(CONFIG_PMUFW_INIT_FILE))"
+endif
+
+$(obj)/$(SPL_BIN)-align.bin: $(obj)/$(SPL_BIN).bin
+	@dd if=$< of=$@ conv=block,sync bs=4 2>/dev/null;
+
+spl/boot.bin: $(obj)/$(SPL_BIN)-align.bin FORCE
+	$(call if_changed,mkimage)
+endif
+
+INPUTS-y	+= $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN).sym
+
+ifdef CONFIG_SAMSUNG
+INPUTS-y	+= $(obj)/$(BOARD)-spl.bin
+endif
+
+ifneq ($(CONFIG_TARGET_SOCFPGA_GEN5)$(CONFIG_TARGET_SOCFPGA_ARRIA10),)
+INPUTS-y	+= $(obj)/$(SPL_BIN).sfp
+endif
+
+INPUTS-$(CONFIG_TARGET_SOCFPGA_SOC64) += $(obj)/u-boot-spl-dtb.hex
+
+ifdef CONFIG_ARCH_SUNXI
+INPUTS-y	+= $(obj)/sunxi-spl.bin
+
+ifdef CONFIG_NAND_SUNXI
+INPUTS-y	+= $(obj)/sunxi-spl-with-ecc.bin
+endif
+endif
+
+ifeq ($(CONFIG_SYS_SOC),"at91")
+INPUTS-y	+= $(obj)/boot.bin
+endif
+
+ifdef CONFIG_TPL_BUILD
+INPUTS-$(CONFIG_TPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-start16-tpl.bin \
+	$(obj)/u-boot-x86-reset16-tpl.bin
+else
+INPUTS-$(CONFIG_SPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-start16-spl.bin \
+	$(obj)/u-boot-x86-reset16-spl.bin
+endif
+
+INPUTS-$(CONFIG_ARCH_ZYNQ)		+= $(obj)/boot.bin
+INPUTS-$(CONFIG_ARCH_ZYNQMP)	+= $(obj)/boot.bin
+
+INPUTS-$(CONFIG_ARCH_MEDIATEK)	+= $(obj)/u-boot-spl-mtk.bin
+
+all:	$(INPUTS-y)
+
+quiet_cmd_cat = CAT     $@
+cmd_cat = cat $(filter-out $(PHONY), $^) > $@
+
+quiet_cmd_copy = COPY    $@
+      cmd_copy = cp $< $@
+
+ifneq ($(CONFIG_SPL_MULTI_DTB_FIT),y)
+FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).dtb
+else ifeq ($(CONFIG_SPL_MULTI_DTB_FIT_LZO),y)
+FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).multidtb.fit.lzo
+else ifeq ($(CONFIG_SPL_MULTI_DTB_FIT_GZIP),y)
+FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).multidtb.fit.gz
+else
+FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).multidtb.fit
+endif
+
+# Build the .dtb file if:
+#   - we are not using OF_PLATDATA
+#   - we are using OF_CONTROL
+#   - we have either OF_SEPARATE or OF_HOSTFILE
+build_dtb :=
+ifeq ($(CONFIG_$(SPL_TPL_)OF_PLATDATA),)
+ifneq ($(CONFIG_$(SPL_TPL_)OF_CONTROL),)
+ifeq ($(CONFIG_OF_SEPARATE)$(CONFIG_OF_HOSTFILE),y)
+build_dtb := y
+endif
+endif
+endif
+
+ifneq ($(build_dtb),)
+$(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin \
+		$(if $(CONFIG_SPL_SEPARATE_BSS),,$(obj)/$(SPL_BIN)-pad.bin) \
+		$(FINAL_DTB_CONTAINER)  FORCE
+	$(call if_changed,cat)
+
+$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-dtb.bin FORCE
+	$(call if_changed,copy)
+else
+$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-nodtb.bin FORCE
+	$(call if_changed,copy)
+endif
+
+# Create a file that pads from the end of u-boot-spl-nodtb.bin to bss_end
+$(obj)/$(SPL_BIN)-pad.bin: $(obj)/$(SPL_BIN)
+	@bss_size_str=$(shell $(NM) $< | awk 'BEGIN {size = 0} /__bss_size/ {size = $$1} END {print "ibase=16; " toupper(size)}' | bc); \
+	dd if=/dev/zero of=$@ bs=1 count=$${bss_size_str} 2>/dev/null;
+
+$(obj)/$(SPL_BIN).dtb: $(obj)/dts/dt-$(SPL_NAME).dtb FORCE
+	$(call if_changed,copy)
+
+pythonpath = PYTHONPATH=scripts/dtc/pylibfdt
+
+DTOC_ARGS := $(pythonpath) $(srctree)/tools/dtoc/dtoc \
+	-d $(obj)/$(SPL_BIN).dtb -p $(SPL_NAME)
+
+ifneq ($(CONFIG_$(SPL_TPL_)OF_PLATDATA_INST),)
+DTOC_ARGS += -i
+endif
+
+quiet_cmd_dtoc = DTOC    $@
+cmd_dtoc = $(DTOC_ARGS) -c $(obj)/dts -C include/generated all
+
+quiet_cmd_plat = PLAT    $@
+cmd_plat = $(CC) $(c_flags) -c $< -o $(filter-out $(PHONY),$@)
+
+$(obj)/dts/dt-%.o: $(obj)/dts/dt-%.c $(platdata-hdr)
+	$(call if_changed,plat)
+
+# Don't use dts_dir here, since it forces running this expensive rule every time
+$(platdata-hdr) $(u-boot-spl-platdata_c) &: $(obj)/$(SPL_BIN).dtb
+	@[ -d $(obj)/dts ] || mkdir -p $(obj)/dts
+	@# Remove old files since which ones we generate depends on the setting
+	@# of OF_PLATDATA_INST and this might change between builds. Leaving old
+	@# ones around is confusing and it is possible that switching the
+	@# setting again will use the old one instead of regenerating it.
+	@rm -f $(u-boot-spl-all-platdata_c) $(u-boot-spl-all-platdata)
+	$(call if_changed,dtoc)
+
+ifdef CONFIG_SAMSUNG
+ifdef CONFIG_VAR_SIZE_SPL
+VAR_SIZE_PARAM = --vs
+else
+VAR_SIZE_PARAM =
+endif
+$(obj)/$(BOARD)-spl.bin: $(obj)/u-boot-spl.bin
+	$(if $(wildcard $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl),\
+	$(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl,\
+	$(objtree)/tools/mkexynosspl) $(VAR_SIZE_PARAM) $< $@
+endif
+
+quiet_cmd_objcopy = OBJCOPY $@
+cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
+
+OBJCOPYFLAGS_$(SPL_BIN)-nodtb.bin = $(SPL_OBJCFLAGS) -O binary \
+		$(if $(CONFIG_$(SPL_TPL_)X86_16BIT_INIT),-R .start16 -R .resetvec)
+
+$(obj)/$(SPL_BIN)-nodtb.bin: $(obj)/$(SPL_BIN) FORCE
+	$(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-x86-start16-spl.bin := -O binary -j .start16
+$(obj)/u-boot-x86-start16-spl.bin: $(obj)/u-boot-spl FORCE
+	$(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-x86-start16-tpl.bin := -O binary -j .start16
+$(obj)/u-boot-x86-start16-tpl.bin: $(obj)/u-boot-tpl FORCE
+	$(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-x86-reset16-spl.bin := -O binary -j .resetvec
+$(obj)/u-boot-x86-reset16-spl.bin: $(obj)/u-boot-spl FORCE
+	$(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-x86-reset16-tpl.bin := -O binary -j .resetvec
+$(obj)/u-boot-x86-reset16-tpl.bin: $(obj)/u-boot-tpl FORCE
+	$(call if_changed,objcopy)
+
+LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
+
+# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
+LDFLAGS_$(SPL_BIN) += $(call ld-option, --no-dynamic-linker)
+
+LDFLAGS_$(SPL_BIN) += --build-id=none
+
+# Pick the best-match (i.e. SPL_TEXT_BASE for SPL, TPL_TEXT_BASE for TPL)
+ifneq ($(CONFIG_$(SPL_TPL_)TEXT_BASE),)
+LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_$(SPL_TPL_)TEXT_BASE)
+endif
+
+ifdef CONFIG_TARGET_SOCFPGA_ARRIA10
+MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage_v1
+else
+MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage
+endif
+$(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE
+	$(call if_changed,mkimage)
+
+MKIMAGEFLAGS_sunxi-spl.bin = -T sunxi_egon \
+	-n $(CONFIG_DEFAULT_DEVICE_TREE)
+
+OBJCOPYFLAGS_u-boot-spl-dtb.hex := -I binary -O ihex --change-address=$(CONFIG_SPL_TEXT_BASE)
+
+$(obj)/u-boot-spl-dtb.hex: $(obj)/u-boot-spl-dtb.bin FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin FORCE
+	$(call if_changed,mkimage)
+
+quiet_cmd_sunxi_spl_image_builder = SUNXI_SPL_IMAGE_BUILDER $@
+cmd_sunxi_spl_image_builder = $(objtree)/tools/sunxi-spl-image-builder \
+				-c $(CONFIG_NAND_SUNXI_SPL_ECC_STRENGTH)/$(CONFIG_NAND_SUNXI_SPL_ECC_SIZE) \
+				-p $(CONFIG_SYS_NAND_PAGE_SIZE) \
+				-o $(CONFIG_SYS_NAND_OOBSIZE) \
+				-u $(CONFIG_NAND_SUNXI_SPL_USABLE_PAGE_SIZE) \
+				-e $(CONFIG_SYS_NAND_BLOCK_SIZE) \
+				-s -b $< $@
+$(obj)/sunxi-spl-with-ecc.bin: $(obj)/sunxi-spl.bin
+	$(call if_changed,sunxi_spl_image_builder)
+
+
+# MediaTek's specific SPL build
+MKIMAGEFLAGS_u-boot-spl-mtk.bin = -T mtk_image \
+	-a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) \
+	-n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
+
+$(obj)/u-boot-spl-mtk.bin: $(obj)/u-boot-spl.bin FORCE
+	$(call if_changed,mkimage)
+
+quiet_cmd_sym ?= SYM     $@
+      cmd_sym ?= $(OBJDUMP) -t $< > $@
+$(obj)/$(SPL_BIN).sym: $(obj)/$(SPL_BIN) FORCE
+	$(call if_changed,sym)
+
+# Generate linker list symbols references to force compiler to not optimize
+# them away when compiling with LTO
+ifdef CONFIG_LTO
+u-boot-spl-keep-syms-lto := $(obj)/keep-syms-lto.o
+u-boot-spl-keep-syms-lto_c := \
+	$(patsubst $(obj)/%.o,$(obj)/%.c,$(u-boot-spl-keep-syms-lto))
+
+quiet_cmd_keep_syms_lto = KSL     $@
+      cmd_keep_syms_lto = \
+	$(srctree)/scripts/gen_ll_addressable_symbols.sh $(NM) $^ > $@
+
+quiet_cmd_keep_syms_lto_cc = KSLCC   $@
+      cmd_keep_syms_lto_cc = \
+	$(CC) $(filter-out $(LTO_CFLAGS),$(c_flags)) -c -o $@ $<
+
+$(u-boot-spl-keep-syms-lto_c): $(u-boot-spl-main) $(u-boot-spl-platdata)
+	$(call if_changed,keep_syms_lto)
+$(u-boot-spl-keep-syms-lto): $(u-boot-spl-keep-syms-lto_c)
+	$(call if_changed,keep_syms_lto_cc)
+else
+u-boot-spl-keep-syms-lto :=
+endif
+
+KBUILD_LDFLAGS += $(call ld-option,--no-warn-rwx-segments)
+
+# Rule to link u-boot-spl
+# May be overridden by arch/$(ARCH)/config.mk
+ifdef CONFIG_LTO
+quiet_cmd_u-boot-spl ?= LTO     $@
+      cmd_u-boot-spl ?= \
+	(									\
+		cd $(obj) &&							\
+		$(CC) -nostdlib -nostartfiles $(LTO_FINAL_LDFLAGS) $(c_flags)	\
+		$(KBUILD_LDFLAGS:%=-Wl,%) $(LDFLAGS_$(@F):%=-Wl,%)		\
+		$(patsubst $(obj)/%,%,$(u-boot-spl-init))			\
+		-Wl,--whole-archive						\
+			$(patsubst $(obj)/%,%,$(u-boot-spl-main))		\
+			$(patsubst $(obj)/%,%,$(u-boot-spl-platdata))		\
+			$(patsubst $(obj)/%,%,$(u-boot-spl-keep-syms-lto))	\
+			$(PLATFORM_LIBS)					\
+		-Wl,--no-whole-archive						\
+		-Wl,-Map,$(SPL_BIN).map -o $(SPL_BIN)				\
+	)
+else
+quiet_cmd_u-boot-spl ?= LD      $@
+      cmd_u-boot-spl ?= \
+	(								\
+		cd $(obj) &&						\
+		$(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_$(@F))		\
+		$(patsubst $(obj)/%,%,$(u-boot-spl-init))		\
+		--whole-archive						\
+			$(patsubst $(obj)/%,%,$(u-boot-spl-main))	\
+			$(patsubst $(obj)/%,%,$(u-boot-spl-platdata))	\
+		--no-whole-archive					\
+		$(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN)	\
+	)
+endif
+
+$(obj)/$(SPL_BIN): $(u-boot-spl-platdata) $(u-boot-spl-init) \
+		$(u-boot-spl-main) $(u-boot-spl-keep-syms-lto) \
+		$(obj)/u-boot-spl.lds FORCE
+	$(call if_changed,u-boot-spl)
+
+$(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ;
+
+PHONY += $(u-boot-spl-dirs)
+$(u-boot-spl-dirs): $(u-boot-spl-platdata) prepare
+	$(Q)$(MAKE) $(build)=$@
+
+PHONY += prepare
+prepare:
+	$(Q)$(MAKE) $(build)=$(obj)/.
+
+quiet_cmd_cpp_lds = LDS     $@
+cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
+		-D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
+
+$(obj)/u-boot-spl.lds: $(LDSCRIPT) FORCE
+	$(call if_changed_dep,cpp_lds)
+
+# read all saved command lines
+
+targets := $(wildcard $(sort $(targets)))
+cmd_files := $(wildcard $(obj)/.*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
+
+ifneq ($(cmd_files),)
+  $(cmd_files): ;	# Do not try to update included dependency files
+  include $(cmd_files)
+endif
+
+PHONY += FORCE
+FORCE:
+
+$(obj)/dts/dt-$(SPL_NAME).dtb: dts/dt.dtb
+	$(Q)$(MAKE) $(build)=$(obj)/dts spl_dtbs
+
+PHONY += dts_dir
+dts_dir:
+	$(shell [ -d $(obj)/dts ] || mkdir -p $(obj)/dts)
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable so we can use it in if_changed and friends.
+.PHONY: $(PHONY)
+
+SPL_OF_LIST_TARGETS = $(patsubst %,dts/%.dtb,$(subst ",,$(CONFIG_SPL_OF_LIST)))
+SHRUNK_ARCH_DTB = $(addprefix $(obj)/,$(SPL_OF_LIST_TARGETS))
+.SECONDEXPANSION:
+$(SHRUNK_ARCH_DTB): $$(patsubst $(obj)/dts/%, arch/$(ARCH)/dts/%, $$@) dts_dir
+	$(call if_changed,fdtgrep)
+
+targets += $(SPL_OF_LIST_TARGETS)
+
+MKIMAGEFLAGS_$(SPL_BIN).multidtb.fit = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
+	-n "Multi DTB fit image for $(SPL_BIN)" -E \
+	$(patsubst %,-b %,$(SHRUNK_ARCH_DTB))
+
+$(obj)/$(SPL_BIN).multidtb.fit: /dev/null $(SHRUNK_ARCH_DTB) FORCE
+	$(call if_changed,mkimage)
+ifneq ($(SOURCE_DATE_EPOCH),)
+	touch -d @$(SOURCE_DATE_EPOCH) $(obj)/$(SPL_BIN).multidtb.fit
+	chmod 0600 $(obj)/$(SPL_BIN).multidtb.fit
+endif
+
+$(obj)/$(SPL_BIN).multidtb.fit.gz: $(obj)/$(SPL_BIN).multidtb.fit
+	@gzip -kf9 $< > $@
+
+$(obj)/$(SPL_BIN).multidtb.fit.lzo: $(obj)/$(SPL_BIN).multidtb.fit
+	@lzop -f9 $< > $@
+
+ifdef CONFIG_ARCH_K3
+tispl.bin: $(obj)/u-boot-spl-nodtb.bin $(SHRUNK_ARCH_DTB) $(SPL_ITS) FORCE
+	$(call if_changed,mkfitimage)
+endif