Index: ATF/Makefile
===================================================================
--- ATF/Makefile (revision 384)
+++ ATF/Makefile (revision 385)
@@ -7,7 +7,7 @@
url = $(DOWNLOAD_SERVER)/sources/U-Boot/ATF
-versions = 2.7.0
+versions = 2.9.0
tarballs = $(addsuffix .tar.xz, $(addprefix arm-trusted-firmware-, $(versions)))
sha1s = $(addsuffix .sha1sum, $(tarballs))
Index: OrangePi/Makefile
===================================================================
--- OrangePi/Makefile (nonexistent)
+++ OrangePi/Makefile (revision 385)
@@ -0,0 +1,13 @@
+
+COMPONENT_TARGETS = $(HARDWARE_NOARCH)
+
+SOURCE_REQUIRES += ALL_DIRS
+
+
+include ../../../build-system/core.mk
+
+
+download_clean:
+ @true
+
+.PHONY: download_clean
Index: OrangePi/edk2/Makefile
===================================================================
--- OrangePi/edk2/Makefile (nonexistent)
+++ OrangePi/edk2/Makefile (revision 385)
@@ -0,0 +1,54 @@
+
+COMPONENT_TARGETS = $(HARDWARE_NOARCH)
+
+
+include ../../../../build-system/constants.mk
+
+
+url = $(DOWNLOAD_SERVER)/sources/U-Boot/OrangePi/edk2
+
+versions = 0.9.1.1
+
+tarballs = $(addsuffix .tar.xz, $(addprefix edk2-rk3588-, $(versions)))
+sha1s = $(addsuffix .sha1sum, $(tarballs))
+
+patches = $(CURDIR)/patches/edk2-rk3588-0.9.1.1-f2.patch
+
+.NOTPARALLEL: $(patches)
+
+
+BUILD_TARGETS = $(tarballs) $(sha1s) $(patches)
+
+
+include ../../../../build-system/core.mk
+
+
+.PHONY: download_clean
+
+
+$(tarballs):
+ @echo -e "\n======= Downloading source tarballs =======" ; \
+ for tarball in $(tarballs) ; do \
+ echo "$(url)/$$tarball" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & \
+ done ; wait
+
+$(sha1s): $(tarballs)
+ @for sha in $@ ; do \
+ echo -e "\n======= Downloading '$$sha' signature =======\n" ; \
+ echo "$(url)/$$sha" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & wait %1 ; \
+ touch $$sha ; \
+ echo -e "\n======= Check the '$$sha' sha1sum =======\n" ; \
+ sha1sum --check $$sha ; ret="$$?" ; \
+ if [ "$$ret" == "1" ]; then \
+ echo -e "\n======= ERROR: Bad '$$sha' sha1sum =======\n" ; \
+ exit 1 ; \
+ fi ; \
+ done
+
+$(patches): $(sha1s)
+ @echo -e "\n======= Create Patches =======\n" ; \
+ ( cd create-0.9.1.1-f2-patch ; ./create.patch.sh ) ; \
+ echo -e "\n"
+
+download_clean:
+ @rm -f $(tarballs) $(sha1s) $(patches)
Index: OrangePi/edk2/create-0.9.1.1-f2-patch/create.patch.sh
===================================================================
--- OrangePi/edk2/create-0.9.1.1-f2-patch/create.patch.sh (nonexistent)
+++ OrangePi/edk2/create-0.9.1.1-f2-patch/create.patch.sh (revision 385)
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+VERSION=0.9.1.1
+
+tar --files-from=file.list -xJvf ../edk2-rk3588-$VERSION.tar.xz
+mv edk2-rk3588-$VERSION edk2-rk3588-$VERSION-orig
+
+cp -rf ./edk2-rk3588-$VERSION-new ./edk2-rk3588-$VERSION
+
+diff --unified -Nr edk2-rk3588-$VERSION-orig edk2-rk3588-$VERSION > edk2-rk3588-$VERSION-f2.patch
+
+mv edk2-rk3588-$VERSION-f2.patch ../patches
+
+rm -rf ./edk2-rk3588-$VERSION
+rm -rf ./edk2-rk3588-$VERSION-orig
Property changes on: OrangePi/edk2/create-0.9.1.1-f2-patch/create.patch.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: OrangePi/edk2/create-0.9.1.1-f2-patch/edk2-rk3588-0.9.1.1-new/edk2-rockchip/Silicon/Rockchip/Library/PlatformBootManagerLib/PlatformBm.c
===================================================================
--- OrangePi/edk2/create-0.9.1.1-f2-patch/edk2-rk3588-0.9.1.1-new/edk2-rockchip/Silicon/Rockchip/Library/PlatformBootManagerLib/PlatformBm.c (nonexistent)
+++ OrangePi/edk2/create-0.9.1.1-f2-patch/edk2-rk3588-0.9.1.1-new/edk2-rockchip/Silicon/Rockchip/Library/PlatformBootManagerLib/PlatformBm.c (revision 385)
@@ -0,0 +1,1321 @@
+/** @file
+ Implementation for PlatformBootManagerLib library class interfaces.
+
+ Copyright (C) 2015-2016, Red Hat, Inc.
+ Copyright (c) 2014 - 2021, ARM Ltd. All rights reserved.<BR>
+ Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
+ Copyright (c) 2021, Semihalf All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <IndustryStandard/Pci22.h>
+#include <Library/BootLogoLib.h>
+#include <Library/CapsuleLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/HobLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootManagerLib.h>
+#include <Library/UefiLib.h>
+#include <Library/UefiRuntimeServicesTableLib.h>
+#include <Library/RkAtagsLib.h>
+#include <Protocol/BootManagerPolicy.h>
+#include <Protocol/DevicePath.h>
+#include <Protocol/EsrtManagement.h>
+#include <Protocol/GraphicsOutput.h>
+#include <Protocol/LoadedImage.h>
+#include <Protocol/NonDiscoverableDevice.h>
+#include <Protocol/PciIo.h>
+#include <Protocol/PciRootBridgeIo.h>
+#include <Protocol/PlatformBootManager.h>
+#include <Guid/BootDiscoveryPolicy.h>
+#include <Guid/EventGroup.h>
+#include <Guid/NonDiscoverableDevice.h>
+#include <Guid/TtyTerm.h>
+#include <Guid/SerialPortLibVendor.h>
+#include <Protocol/FirmwareVolume2.h>
+
+#include "PlatformBm.h"
+
+#define DP_NODE_LEN(Type) { (UINT8)sizeof (Type), (UINT8)(sizeof (Type) >> 8) }
+
+#pragma pack (1)
+typedef struct {
+ VENDOR_DEVICE_PATH SerialDxe;
+ UART_DEVICE_PATH Uart;
+ VENDOR_DEFINED_DEVICE_PATH TermType;
+ EFI_DEVICE_PATH_PROTOCOL End;
+} PLATFORM_SERIAL_CONSOLE;
+#pragma pack ()
+
+STATIC PLATFORM_SERIAL_CONSOLE mSerialConsole = {
+ //
+ // VENDOR_DEVICE_PATH SerialDxe
+ //
+ {
+ { HARDWARE_DEVICE_PATH, HW_VENDOR_DP, DP_NODE_LEN (VENDOR_DEVICE_PATH) },
+ EDKII_SERIAL_PORT_LIB_VENDOR_GUID
+ },
+
+ //
+ // UART_DEVICE_PATH Uart
+ //
+ {
+ { MESSAGING_DEVICE_PATH, MSG_UART_DP, DP_NODE_LEN (UART_DEVICE_PATH) },
+ 0, // Reserved
+ FixedPcdGet64 (PcdUartDefaultBaudRate), // BaudRate
+ FixedPcdGet8 (PcdUartDefaultDataBits), // DataBits
+ FixedPcdGet8 (PcdUartDefaultParity), // Parity
+ FixedPcdGet8 (PcdUartDefaultStopBits) // StopBits
+ },
+
+ //
+ // VENDOR_DEFINED_DEVICE_PATH TermType
+ //
+ {
+ {
+ MESSAGING_DEVICE_PATH, MSG_VENDOR_DP,
+ DP_NODE_LEN (VENDOR_DEFINED_DEVICE_PATH)
+ }
+ //
+ // Guid to be filled in dynamically
+ //
+ },
+
+ //
+ // EFI_DEVICE_PATH_PROTOCOL End
+ //
+ {
+ END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ DP_NODE_LEN (EFI_DEVICE_PATH_PROTOCOL)
+ }
+};
+
+#pragma pack (1)
+typedef struct {
+ USB_CLASS_DEVICE_PATH Keyboard;
+ EFI_DEVICE_PATH_PROTOCOL End;
+} PLATFORM_USB_KEYBOARD;
+#pragma pack ()
+
+STATIC PLATFORM_USB_KEYBOARD mUsbKeyboard = {
+ //
+ // USB_CLASS_DEVICE_PATH Keyboard
+ //
+ {
+ {
+ MESSAGING_DEVICE_PATH, MSG_USB_CLASS_DP,
+ DP_NODE_LEN (USB_CLASS_DEVICE_PATH)
+ },
+ 0xFFFF, // VendorId: any
+ 0xFFFF, // ProductId: any
+ 3, // DeviceClass: HID
+ 1, // DeviceSubClass: boot
+ 1 // DeviceProtocol: keyboard
+ },
+
+ //
+ // EFI_DEVICE_PATH_PROTOCOL End
+ //
+ {
+ END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ DP_NODE_LEN (EFI_DEVICE_PATH_PROTOCOL)
+ }
+};
+
+/**
+ Check if the handle satisfies a particular condition.
+
+ @param[in] Handle The handle to check.
+ @param[in] ReportText A caller-allocated string passed in for reporting
+ purposes. It must never be NULL.
+
+ @retval TRUE The condition is satisfied.
+ @retval FALSE Otherwise. This includes the case when the condition could not
+ be fully evaluated due to an error.
+**/
+typedef
+BOOLEAN
+(EFIAPI *FILTER_FUNCTION)(
+ IN EFI_HANDLE Handle,
+ IN CONST CHAR16 *ReportText
+ );
+
+/**
+ Process a handle.
+
+ @param[in] Handle The handle to process.
+ @param[in] ReportText A caller-allocated string passed in for reporting
+ purposes. It must never be NULL.
+**/
+typedef
+VOID
+(EFIAPI *CALLBACK_FUNCTION)(
+ IN EFI_HANDLE Handle,
+ IN CONST CHAR16 *ReportText
+ );
+
+/**
+ Locate all handles that carry the specified protocol, filter them with a
+ callback function, and pass each handle that passes the filter to another
+ callback.
+
+ @param[in] ProtocolGuid The protocol to look for.
+
+ @param[in] Filter The filter function to pass each handle to. If this
+ parameter is NULL, then all handles are processed.
+
+ @param[in] Process The callback function to pass each handle to that
+ clears the filter.
+**/
+STATIC
+VOID
+FilterAndProcess (
+ IN EFI_GUID *ProtocolGuid,
+ IN FILTER_FUNCTION Filter OPTIONAL,
+ IN CALLBACK_FUNCTION Process
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE *Handles;
+ UINTN NoHandles;
+ UINTN Idx;
+
+ Status = gBS->LocateHandleBuffer (
+ ByProtocol,
+ ProtocolGuid,
+ NULL /* SearchKey */,
+ &NoHandles,
+ &Handles
+ );
+ if (EFI_ERROR (Status)) {
+ //
+ // This is not an error, just an informative condition.
+ //
+ DEBUG ((
+ DEBUG_VERBOSE,
+ "%a: %g: %r\n",
+ __FUNCTION__,
+ ProtocolGuid,
+ Status
+ ));
+ return;
+ }
+
+ ASSERT (NoHandles > 0);
+ for (Idx = 0; Idx < NoHandles; ++Idx) {
+ CHAR16 *DevicePathText;
+ STATIC CHAR16 Fallback[] = L"<device path unavailable>";
+
+ //
+ // The ConvertDevicePathToText() function handles NULL input transparently.
+ //
+ DevicePathText = ConvertDevicePathToText (
+ DevicePathFromHandle (Handles[Idx]),
+ FALSE, // DisplayOnly
+ FALSE // AllowShortcuts
+ );
+ if (DevicePathText == NULL) {
+ DevicePathText = Fallback;
+ }
+
+ if ((Filter == NULL) || Filter (Handles[Idx], DevicePathText)) {
+ Process (Handles[Idx], DevicePathText);
+ }
+
+ if (DevicePathText != Fallback) {
+ FreePool (DevicePathText);
+ }
+ }
+
+ gBS->FreePool (Handles);
+}
+
+/**
+ This FILTER_FUNCTION checks if a handle corresponds to a PCI display device.
+**/
+STATIC
+BOOLEAN
+EFIAPI
+IsPciDisplay (
+ IN EFI_HANDLE Handle,
+ IN CONST CHAR16 *ReportText
+ )
+{
+ EFI_STATUS Status;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ PCI_TYPE00 Pci;
+
+ Status = gBS->HandleProtocol (
+ Handle,
+ &gEfiPciIoProtocolGuid,
+ (VOID **)&PciIo
+ );
+ if (EFI_ERROR (Status)) {
+ //
+ // This is not an error worth reporting.
+ //
+ return FALSE;
+ }
+
+ Status = PciIo->Pci.Read (
+ PciIo,
+ EfiPciIoWidthUint32,
+ 0 /* Offset */,
+ sizeof Pci / sizeof (UINT32),
+ &Pci
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: %s: %r\n", __FUNCTION__, ReportText, Status));
+ return FALSE;
+ }
+
+ return IS_PCI_DISPLAY (&Pci);
+}
+
+/**
+ This FILTER_FUNCTION checks if a handle corresponds to a non-discoverable
+ USB host controller.
+**/
+STATIC
+BOOLEAN
+EFIAPI
+IsUsbHost (
+ IN EFI_HANDLE Handle,
+ IN CONST CHAR16 *ReportText
+ )
+{
+ NON_DISCOVERABLE_DEVICE *Device;
+ EFI_STATUS Status;
+
+ Status = gBS->HandleProtocol (
+ Handle,
+ &gEdkiiNonDiscoverableDeviceProtocolGuid,
+ (VOID **)&Device
+ );
+ if (EFI_ERROR (Status)) {
+ return FALSE;
+ }
+
+ if (CompareGuid (Device->Type, &gEdkiiNonDiscoverableUhciDeviceGuid) ||
+ CompareGuid (Device->Type, &gEdkiiNonDiscoverableEhciDeviceGuid) ||
+ CompareGuid (Device->Type, &gEdkiiNonDiscoverableXhciDeviceGuid))
+ {
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+/**
+ This FILTER_FUNCTION checks if the Block I/O protocol handle
+ corresponds to that of the boot SD/eMMC device.
+
+ This code is almost identical to FvbCheckIsBootDevice from RkFvbDxe.
+**/
+STATIC
+BOOLEAN
+EFIAPI
+IsSdBootBlockIo (
+ IN EFI_HANDLE Handle,
+ IN CONST CHAR16 *ReportText
+ )
+{
+ EFI_STATUS Status;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;
+ EFI_HANDLE DeviceHandle;
+ NON_DISCOVERABLE_DEVICE *Device;
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Descriptor;
+ RKATAG_BOOTDEV *BootDevice;
+
+ BootDevice = RkAtagsGetBootDev ();
+ if (BootDevice == NULL) {
+ return FALSE;
+ }
+
+ DevicePath = DevicePathFromHandle (Handle);
+
+ if (DevicePath->Type != HARDWARE_DEVICE_PATH
+ || DevicePath->SubType != HW_VENDOR_DP) {
+ return FALSE;
+ }
+
+ Status = gBS->LocateDevicePath (&gEdkiiNonDiscoverableDeviceProtocolGuid,
+ &DevicePath, &DeviceHandle);
+ if (EFI_ERROR (Status)) {
+ return FALSE;
+ }
+
+ Status = gBS->HandleProtocol (DeviceHandle,
+ &gEdkiiNonDiscoverableDeviceProtocolGuid, (VOID **) &Device);
+ if (EFI_ERROR (Status)) {
+ return FALSE;
+ }
+
+ Descriptor = &Device->Resources[0];
+
+ if (Descriptor->Desc != ACPI_ADDRESS_SPACE_DESCRIPTOR ||
+ Descriptor->ResType != ACPI_ADDRESS_SPACE_TYPE_MEM) {
+ return FALSE;
+ }
+
+ if (BootDevice->DevType == RkAtagBootDevTypeEmmc) {
+ return Descriptor->AddrRangeMin == PcdGet32 (PcdDwcSdhciBaseAddress);
+ }
+ if (BootDevice->DevType == RkAtagBootDevTypeSd0) {
+ return Descriptor->AddrRangeMin == PcdGet32 (PcdRkSdmmcBaseAddress);
+ }
+
+ return FALSE;
+}
+
+/**
+ This CALLBACK_FUNCTION attempts to connect a handle non-recursively, asking
+ the matching driver to produce all first-level child handles.
+**/
+STATIC
+VOID
+EFIAPI
+Connect (
+ IN EFI_HANDLE Handle,
+ IN CONST CHAR16 *ReportText
+ )
+{
+ EFI_STATUS Status;
+
+ Status = gBS->ConnectController (
+ Handle, // ControllerHandle
+ NULL, // DriverImageHandle
+ NULL, // RemainingDevicePath -- produce all children
+ FALSE // Recursive
+ );
+ DEBUG ((
+ EFI_ERROR (Status) ? DEBUG_ERROR : DEBUG_VERBOSE,
+ "%a: %s: %r\n",
+ __FUNCTION__,
+ ReportText,
+ Status
+ ));
+}
+
+/**
+ This CALLBACK_FUNCTION retrieves the EFI_DEVICE_PATH_PROTOCOL from the
+ handle, and adds it to ConOut and ErrOut.
+**/
+STATIC
+VOID
+EFIAPI
+AddOutput (
+ IN EFI_HANDLE Handle,
+ IN CONST CHAR16 *ReportText
+ )
+{
+ EFI_STATUS Status;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;
+
+ DevicePath = DevicePathFromHandle (Handle);
+ if (DevicePath == NULL) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: %s: handle %p: device path not found\n",
+ __FUNCTION__,
+ ReportText,
+ Handle
+ ));
+ return;
+ }
+
+ Status = EfiBootManagerUpdateConsoleVariable (ConOut, DevicePath, NULL);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: %s: adding to ConOut: %r\n",
+ __FUNCTION__,
+ ReportText,
+ Status
+ ));
+ return;
+ }
+
+ Status = EfiBootManagerUpdateConsoleVariable (ErrOut, DevicePath, NULL);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: %s: adding to ErrOut: %r\n",
+ __FUNCTION__,
+ ReportText,
+ Status
+ ));
+ return;
+ }
+
+ DEBUG ((
+ DEBUG_VERBOSE,
+ "%a: %s: added to ConOut and ErrOut\n",
+ __FUNCTION__,
+ ReportText
+ ));
+}
+
+STATIC
+VOID
+PlatformRegisterFvBootOption (
+ CONST EFI_GUID *FileGuid,
+ CHAR16 *Description,
+ UINT32 Attributes,
+ EFI_INPUT_KEY *Key
+ )
+{
+ EFI_STATUS Status;
+ INTN OptionIndex;
+ EFI_BOOT_MANAGER_LOAD_OPTION NewOption;
+ EFI_BOOT_MANAGER_LOAD_OPTION *BootOptions;
+ UINTN BootOptionCount;
+ MEDIA_FW_VOL_FILEPATH_DEVICE_PATH FileNode;
+ EFI_LOADED_IMAGE_PROTOCOL *LoadedImage;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;
+
+ Status = gBS->HandleProtocol (
+ gImageHandle,
+ &gEfiLoadedImageProtocolGuid,
+ (VOID **)&LoadedImage
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ EfiInitializeFwVolDevicepathNode (&FileNode, FileGuid);
+ DevicePath = DevicePathFromHandle (LoadedImage->DeviceHandle);
+ ASSERT (DevicePath != NULL);
+ DevicePath = AppendDevicePathNode (
+ DevicePath,
+ (EFI_DEVICE_PATH_PROTOCOL *)&FileNode
+ );
+ ASSERT (DevicePath != NULL);
+
+ Status = EfiBootManagerInitializeLoadOption (
+ &NewOption,
+ LoadOptionNumberUnassigned,
+ LoadOptionTypeBoot,
+ Attributes,
+ Description,
+ DevicePath,
+ NULL,
+ 0
+ );
+ ASSERT_EFI_ERROR (Status);
+ FreePool (DevicePath);
+
+ BootOptions = EfiBootManagerGetLoadOptions (
+ &BootOptionCount,
+ LoadOptionTypeBoot
+ );
+
+ OptionIndex = EfiBootManagerFindLoadOption (
+ &NewOption,
+ BootOptions,
+ BootOptionCount
+ );
+
+ if (OptionIndex == -1) {
+ Status = EfiBootManagerAddLoadOptionVariable (&NewOption, MAX_UINTN);
+ ASSERT_EFI_ERROR (Status);
+ Status = EfiBootManagerAddKeyOptionVariable (
+ NULL,
+ (UINT16)NewOption.OptionNumber,
+ 0,
+ Key,
+ NULL
+ );
+ ASSERT (Status == EFI_SUCCESS || Status == EFI_ALREADY_STARTED);
+ }
+
+ EfiBootManagerFreeLoadOption (&NewOption);
+ EfiBootManagerFreeLoadOptions (BootOptions, BootOptionCount);
+}
+
+STATIC
+VOID
+GetPlatformOptions (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_BOOT_MANAGER_LOAD_OPTION *CurrentBootOptions;
+ EFI_BOOT_MANAGER_LOAD_OPTION *BootOptions;
+ EFI_INPUT_KEY *BootKeys;
+ PLATFORM_BOOT_MANAGER_PROTOCOL *PlatformBootManager;
+ UINTN CurrentBootOptionCount;
+ UINTN Index;
+ UINTN BootCount;
+
+ Status = gBS->LocateProtocol (
+ &gPlatformBootManagerProtocolGuid,
+ NULL,
+ (VOID **)&PlatformBootManager
+ );
+ if (EFI_ERROR (Status)) {
+ return;
+ }
+
+ Status = PlatformBootManager->GetPlatformBootOptionsAndKeys (
+ &BootCount,
+ &BootOptions,
+ &BootKeys
+ );
+ if (EFI_ERROR (Status)) {
+ return;
+ }
+
+ //
+ // Fetch the existent boot options. If there are none, CurrentBootCount
+ // will be zeroed.
+ //
+ CurrentBootOptions = EfiBootManagerGetLoadOptions (
+ &CurrentBootOptionCount,
+ LoadOptionTypeBoot
+ );
+ //
+ // Process the platform boot options.
+ //
+ for (Index = 0; Index < BootCount; Index++) {
+ INTN Match;
+ UINTN BootOptionNumber;
+
+ //
+ // If there are any preexistent boot options, and the subject platform boot
+ // option is already among them, then don't try to add it. Just get its
+ // assigned boot option number so we can associate a hotkey with it. Note
+ // that EfiBootManagerFindLoadOption() deals fine with (CurrentBootOptions
+ // == NULL) if (CurrentBootCount == 0).
+ //
+ Match = EfiBootManagerFindLoadOption (
+ &BootOptions[Index],
+ CurrentBootOptions,
+ CurrentBootOptionCount
+ );
+ if (Match >= 0) {
+ BootOptionNumber = CurrentBootOptions[Match].OptionNumber;
+ } else {
+ //
+ // Add the platform boot options as a new one, at the end of the boot
+ // order. Note that if the platform provided this boot option with an
+ // unassigned option number, then the below function call will assign a
+ // number.
+ //
+ Status = EfiBootManagerAddLoadOptionVariable (
+ &BootOptions[Index],
+ MAX_UINTN
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: failed to register \"%s\": %r\n",
+ __FUNCTION__,
+ BootOptions[Index].Description,
+ Status
+ ));
+ continue;
+ }
+
+ BootOptionNumber = BootOptions[Index].OptionNumber;
+ }
+
+ //
+ // Register a hotkey with the boot option, if requested.
+ //
+ if (BootKeys[Index].UnicodeChar == L'\0') {
+ continue;
+ }
+
+ Status = EfiBootManagerAddKeyOptionVariable (
+ NULL,
+ BootOptionNumber,
+ 0,
+ &BootKeys[Index],
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: failed to register hotkey for \"%s\": %r\n",
+ __FUNCTION__,
+ BootOptions[Index].Description,
+ Status
+ ));
+ }
+ }
+
+ EfiBootManagerFreeLoadOptions (CurrentBootOptions, CurrentBootOptionCount);
+ EfiBootManagerFreeLoadOptions (BootOptions, BootCount);
+ FreePool (BootKeys);
+}
+
+/**
+ Remove all MemoryMapped(...)/FvFile(...) and Fv(...)/FvFile(...) boot options
+ whose device paths do not resolve exactly to an FvFile in the system.
+
+ This removes any boot options that point to binaries built into the firmware
+ and have become stale due to any of the following:
+ - DXEFV's base address or size changed (historical),
+ - DXEFV's FvNameGuid changed,
+ - the FILE_GUID of the pointed-to binary changed,
+ - the referenced binary is no longer built into the firmware.
+
+ EfiBootManagerFindLoadOption() used in PlatformRegisterFvBootOption() only
+ avoids exact duplicates.
+**/
+VOID
+RemoveStaleFvFileOptions (
+ VOID
+ )
+{
+ EFI_BOOT_MANAGER_LOAD_OPTION *BootOptions;
+ UINTN BootOptionCount;
+ UINTN Index;
+
+ BootOptions = EfiBootManagerGetLoadOptions (&BootOptionCount,
+ LoadOptionTypeBoot);
+
+ for (Index = 0; Index < BootOptionCount; ++Index) {
+ EFI_DEVICE_PATH_PROTOCOL *Node1, *Node2, *SearchNode;
+ EFI_STATUS Status;
+ EFI_HANDLE FvHandle;
+
+ //
+ // If the device path starts with neither MemoryMapped(...) nor Fv(...),
+ // then keep the boot option.
+ //
+ Node1 = BootOptions[Index].FilePath;
+ if (!(DevicePathType (Node1) == HARDWARE_DEVICE_PATH &&
+ DevicePathSubType (Node1) == HW_MEMMAP_DP) &&
+ !(DevicePathType (Node1) == MEDIA_DEVICE_PATH &&
+ DevicePathSubType (Node1) == MEDIA_PIWG_FW_VOL_DP)) {
+ continue;
+ }
+
+ //
+ // If the second device path node is not FvFile(...), then keep the boot
+ // option.
+ //
+ Node2 = NextDevicePathNode (Node1);
+ if (DevicePathType (Node2) != MEDIA_DEVICE_PATH ||
+ DevicePathSubType (Node2) != MEDIA_PIWG_FW_FILE_DP) {
+ continue;
+ }
+
+ //
+ // Locate the Firmware Volume2 protocol instance that is denoted by the
+ // boot option. If this lookup fails (i.e., the boot option references a
+ // firmware volume that doesn't exist), then we'll proceed to delete the
+ // boot option.
+ //
+ SearchNode = Node1;
+ Status = gBS->LocateDevicePath (&gEfiFirmwareVolume2ProtocolGuid,
+ &SearchNode, &FvHandle);
+
+ if (!EFI_ERROR (Status)) {
+ //
+ // The firmware volume was found; now let's see if it contains the FvFile
+ // identified by GUID.
+ //
+ EFI_FIRMWARE_VOLUME2_PROTOCOL *FvProtocol;
+ MEDIA_FW_VOL_FILEPATH_DEVICE_PATH *FvFileNode;
+ UINTN BufferSize;
+ EFI_FV_FILETYPE FoundType;
+ EFI_FV_FILE_ATTRIBUTES FileAttributes;
+ UINT32 AuthenticationStatus;
+
+ Status = gBS->HandleProtocol (FvHandle, &gEfiFirmwareVolume2ProtocolGuid,
+ (VOID **)&FvProtocol);
+ ASSERT_EFI_ERROR (Status);
+
+ FvFileNode = (MEDIA_FW_VOL_FILEPATH_DEVICE_PATH *)Node2;
+ //
+ // Buffer==NULL means we request metadata only: BufferSize, FoundType,
+ // FileAttributes.
+ //
+ Status = FvProtocol->ReadFile (
+ FvProtocol,
+ &FvFileNode->FvFileName, // NameGuid
+ NULL, // Buffer
+ &BufferSize,
+ &FoundType,
+ &FileAttributes,
+ &AuthenticationStatus
+ );
+ if (!EFI_ERROR (Status)) {
+ //
+ // The FvFile was found. Keep the boot option.
+ //
+ continue;
+ }
+ }
+
+ //
+ // Delete the boot option.
+ //
+ Status = EfiBootManagerDeleteLoadOptionVariable (
+ BootOptions[Index].OptionNumber, LoadOptionTypeBoot);
+ DEBUG_CODE (
+ CHAR16 *DevicePathString;
+
+ DevicePathString = ConvertDevicePathToText(BootOptions[Index].FilePath,
+ FALSE, FALSE);
+ DEBUG ((
+ EFI_ERROR (Status) ? DEBUG_WARN : DEBUG_VERBOSE,
+ "%a: removing stale Boot#%04x %s: %r\n",
+ __FUNCTION__,
+ (UINT32)BootOptions[Index].OptionNumber,
+ DevicePathString == NULL ? L"<unavailable>" : DevicePathString,
+ Status
+ ));
+ if (DevicePathString != NULL) {
+ FreePool (DevicePathString);
+ }
+ );
+ }
+
+ EfiBootManagerFreeLoadOptions (BootOptions, BootOptionCount);
+}
+
+STATIC
+VOID
+PlatformRegisterOptionsAndKeys (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_INPUT_KEY Enter;
+ EFI_INPUT_KEY F2;
+ EFI_INPUT_KEY Esc;
+ EFI_BOOT_MANAGER_LOAD_OPTION BootOption;
+
+ GetPlatformOptions ();
+
+ //
+ // Register ENTER as CONTINUE key
+ //
+ Enter.ScanCode = SCAN_NULL;
+ Enter.UnicodeChar = CHAR_CARRIAGE_RETURN;
+ Status = EfiBootManagerRegisterContinueKeyOption (0, &Enter, NULL);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Map F2 and ESC to Boot Manager Menu
+ //
+ F2.ScanCode = SCAN_F2;
+ F2.UnicodeChar = CHAR_NULL;
+ Esc.ScanCode = SCAN_ESC;
+ Esc.UnicodeChar = CHAR_NULL;
+ Status = EfiBootManagerGetBootManagerMenu (&BootOption);
+ ASSERT_EFI_ERROR (Status);
+ Status = EfiBootManagerAddKeyOptionVariable (
+ NULL,
+ (UINT16)BootOption.OptionNumber,
+ 0,
+ &F2,
+ NULL
+ );
+ ASSERT (Status == EFI_SUCCESS || Status == EFI_ALREADY_STARTED);
+ Status = EfiBootManagerAddKeyOptionVariable (
+ NULL,
+ (UINT16)BootOption.OptionNumber,
+ 0,
+ &Esc,
+ NULL
+ );
+ ASSERT (Status == EFI_SUCCESS || Status == EFI_ALREADY_STARTED);
+}
+
+//
+// BDS Platform Functions
+//
+
+/**
+ Do the platform init, can be customized by OEM/IBV
+ Possible things that can be done in PlatformBootManagerBeforeConsole:
+ > Update console variable: 1. include hot-plug devices;
+ > 2. Clear ConIn and add SOL for AMT
+ > Register new Driver#### or Boot####
+ > Register new Key####: e.g.: F12
+ > Signal ReadyToLock event
+ > Authentication action: 1. connect Auth devices;
+ > 2. Identify auto logon user.
+**/
+VOID
+EFIAPI
+PlatformBootManagerBeforeConsole (
+ VOID
+ )
+{
+ //
+ // Signal EndOfDxe PI Event
+ //
+ EfiEventGroupSignal (&gEfiEndOfDxeEventGroupGuid);
+
+ //
+ // Dispatch deferred images after EndOfDxe event.
+ //
+ EfiBootManagerDispatchDeferredImages ();
+
+ //
+ // Locate the PCI root bridges and make the PCI bus driver connect each,
+ // non-recursively. This will produce a number of child handles with PciIo on
+ // them.
+ //
+ FilterAndProcess (&gEfiPciRootBridgeIoProtocolGuid, NULL, Connect);
+
+ //
+ // Find all display class PCI devices (using the handles from the previous
+ // step), and connect them non-recursively. This should produce a number of
+ // child handles with GOPs on them.
+ //
+ FilterAndProcess (&gEfiPciIoProtocolGuid, IsPciDisplay, Connect);
+
+ //
+ // Now add the device path of all handles with GOP on them to ConOut and
+ // ErrOut.
+ //
+ FilterAndProcess (&gEfiGraphicsOutputProtocolGuid, NULL, AddOutput);
+
+ //
+ // The core BDS code connects short-form USB device paths by explicitly
+ // looking for handles with PCI I/O installed, and checking the PCI class
+ // code whether it matches the one for a USB host controller. This means
+ // non-discoverable USB host controllers need to have the non-discoverable
+ // PCI driver attached first.
+ //
+ FilterAndProcess (&gEdkiiNonDiscoverableDeviceProtocolGuid, IsUsbHost, Connect);
+
+ //
+ // Connect USB OHCI controller(s)
+ //
+ FilterAndProcess (&gOhciDeviceProtocolGuid, NULL, Connect);
+
+ //
+ // Connect the Block I/O device produced by the SD/eMMC device that
+ // booted UEFI. We don't want BDS to ignore this device as it would
+ // prevent RkFvbDxe from detecting it and dumping the NVRAM variables
+ // in time.
+ //
+ FilterAndProcess (&gEfiBlockIoProtocolGuid, IsSdBootBlockIo, Connect);
+
+ //
+ // Add the hardcoded short-form USB keyboard device path to ConIn.
+ //
+ EfiBootManagerUpdateConsoleVariable (
+ ConIn,
+ (EFI_DEVICE_PATH_PROTOCOL *)&mUsbKeyboard,
+ NULL
+ );
+
+ //
+ // Add the hardcoded serial console device path to ConIn, ConOut, ErrOut.
+ //
+ STATIC_ASSERT (
+ FixedPcdGet8 (PcdDefaultTerminalType) == 4,
+ "PcdDefaultTerminalType must be TTYTERM"
+ );
+ STATIC_ASSERT (
+ FixedPcdGet8 (PcdUartDefaultParity) != 0,
+ "PcdUartDefaultParity must be set to an actual value, not 'default'"
+ );
+ STATIC_ASSERT (
+ FixedPcdGet8 (PcdUartDefaultStopBits) != 0,
+ "PcdUartDefaultStopBits must be set to an actual value, not 'default'"
+ );
+
+ CopyGuid (&mSerialConsole.TermType.Guid, &gEfiTtyTermGuid);
+
+ EfiBootManagerUpdateConsoleVariable (
+ ConIn,
+ (EFI_DEVICE_PATH_PROTOCOL *)&mSerialConsole,
+ NULL
+ );
+ EfiBootManagerUpdateConsoleVariable (
+ ConOut,
+ (EFI_DEVICE_PATH_PROTOCOL *)&mSerialConsole,
+ NULL
+ );
+ EfiBootManagerUpdateConsoleVariable (
+ ErrOut,
+ (EFI_DEVICE_PATH_PROTOCOL *)&mSerialConsole,
+ NULL
+ );
+
+ //
+ // Register platform-specific boot options and keyboard shortcuts.
+ //
+ PlatformRegisterOptionsAndKeys ();
+}
+
+STATIC
+VOID
+HandleCapsules (
+ VOID
+ )
+{
+ ESRT_MANAGEMENT_PROTOCOL *EsrtManagement;
+ EFI_PEI_HOB_POINTERS HobPointer;
+ EFI_CAPSULE_HEADER *CapsuleHeader;
+ BOOLEAN NeedReset;
+ EFI_STATUS Status;
+
+ DEBUG ((DEBUG_INFO, "%a: processing capsules ...\n", __FUNCTION__));
+
+ Status = gBS->LocateProtocol (
+ &gEsrtManagementProtocolGuid,
+ NULL,
+ (VOID **)&EsrtManagement
+ );
+ if (!EFI_ERROR (Status)) {
+ EsrtManagement->SyncEsrtFmp ();
+ }
+
+ //
+ // Find all capsule images from hob
+ //
+ HobPointer.Raw = GetHobList ();
+ NeedReset = FALSE;
+ while ((HobPointer.Raw = GetNextHob (
+ EFI_HOB_TYPE_UEFI_CAPSULE,
+ HobPointer.Raw
+ )) != NULL)
+ {
+ CapsuleHeader = (VOID *)(UINTN)HobPointer.Capsule->BaseAddress;
+
+ Status = ProcessCapsuleImage (CapsuleHeader);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: failed to process capsule %p - %r\n",
+ __FUNCTION__,
+ CapsuleHeader,
+ Status
+ ));
+ return;
+ }
+
+ NeedReset = TRUE;
+ HobPointer.Raw = GET_NEXT_HOB (HobPointer);
+ }
+
+ if (NeedReset) {
+ DEBUG ((
+ DEBUG_WARN,
+ "%a: capsule update successful, resetting ...\n",
+ __FUNCTION__
+ ));
+
+ gRT->ResetSystem (EfiResetCold, EFI_SUCCESS, 0, NULL);
+ CpuDeadLoop ();
+ }
+}
+
+#define VERSION_STRING_PREFIX L"Tianocore/EDK2 firmware version "
+
+/**
+ This functions checks the value of BootDiscoverPolicy variable and
+ connect devices of class specified by that variable. Then it refreshes
+ Boot order for newly discovered boot device.
+
+ @retval EFI_SUCCESS Devices connected successfully or connection
+ not required.
+ @retval others Return values from GetVariable(), LocateProtocol()
+ and ConnectDeviceClass().
+**/
+STATIC
+EFI_STATUS
+BootDiscoveryPolicyHandler (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ UINT32 DiscoveryPolicy;
+ UINT32 DiscoveryPolicyOld;
+ UINTN Size;
+ EFI_BOOT_MANAGER_POLICY_PROTOCOL *BMPolicy;
+ EFI_GUID *Class;
+
+ Size = sizeof (DiscoveryPolicy);
+ Status = gRT->GetVariable (
+ BOOT_DISCOVERY_POLICY_VAR,
+ &gBootDiscoveryPolicyMgrFormsetGuid,
+ NULL,
+ &Size,
+ &DiscoveryPolicy
+ );
+ if (Status == EFI_NOT_FOUND) {
+ DiscoveryPolicy = PcdGet32 (PcdBootDiscoveryPolicy);
+ Status = PcdSet32S (PcdBootDiscoveryPolicy, DiscoveryPolicy);
+ if (Status == EFI_NOT_FOUND) {
+ return EFI_SUCCESS;
+ } else if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ } else if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (DiscoveryPolicy == BDP_CONNECT_MINIMAL) {
+ return EFI_SUCCESS;
+ }
+
+ switch (DiscoveryPolicy) {
+ case BDP_CONNECT_NET:
+ Class = &gEfiBootManagerPolicyNetworkGuid;
+ break;
+ case BDP_CONNECT_ALL:
+ Class = &gEfiBootManagerPolicyConnectAllGuid;
+ break;
+ default:
+ DEBUG ((
+ DEBUG_INFO,
+ "%a - Unexpected DiscoveryPolicy (0x%x). Run Minimal Discovery Policy\n",
+ __FUNCTION__,
+ DiscoveryPolicy
+ ));
+ return EFI_SUCCESS;
+ }
+
+ Status = gBS->LocateProtocol (
+ &gEfiBootManagerPolicyProtocolGuid,
+ NULL,
+ (VOID **)&BMPolicy
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_INFO,
+ "%a - Failed to locate gEfiBootManagerPolicyProtocolGuid."
+ "Driver connect will be skipped.\n",
+ __FUNCTION__
+ ));
+ return Status;
+ }
+
+ Status = BMPolicy->ConnectDeviceClass (BMPolicy, Class);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a - ConnectDeviceClass returns - %r\n", __FUNCTION__, Status));
+ return Status;
+ }
+
+ //
+ // Refresh Boot Options if Boot Discovery Policy has been changed
+ //
+ Size = sizeof (DiscoveryPolicyOld);
+ Status = gRT->GetVariable (
+ BOOT_DISCOVERY_POLICY_OLD_VAR,
+ &gBootDiscoveryPolicyMgrFormsetGuid,
+ NULL,
+ &Size,
+ &DiscoveryPolicyOld
+ );
+ if ((Status == EFI_NOT_FOUND) || (DiscoveryPolicyOld != DiscoveryPolicy)) {
+ EfiBootManagerRefreshAllBootOption ();
+
+ Status = gRT->SetVariable (
+ BOOT_DISCOVERY_POLICY_OLD_VAR,
+ &gBootDiscoveryPolicyMgrFormsetGuid,
+ EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS,
+ sizeof (DiscoveryPolicyOld),
+ &DiscoveryPolicy
+ );
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Do the platform specific action after the console is ready
+ Possible things that can be done in PlatformBootManagerAfterConsole:
+ > Console post action:
+ > Dynamically switch output mode from 100x31 to 80x25 for certain scenario
+ > Signal console ready platform customized event
+ > Run diagnostics like memory testing
+ > Connect certain devices
+ > Dispatch additional option roms
+ > Special boot: e.g.: USB boot, enter UI
+**/
+VOID
+EFIAPI
+PlatformBootManagerAfterConsole (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput;
+ UINTN FirmwareVerLength;
+ UINTN PosX;
+ UINTN PosY;
+ EFI_INPUT_KEY Key;
+
+ EfiEventGroupSignal (&gRockchipEventPlatformBmAfterConsoleGuid);
+
+ FirmwareVerLength = StrLen (PcdGetPtr (PcdFirmwareVersionString));
+
+ //
+ // Show the splash screen.
+ //
+ Status = BootLogoEnableLogo ();
+ if (EFI_ERROR (Status)) {
+ if (FirmwareVerLength > 0) {
+ Print (
+ VERSION_STRING_PREFIX L"%s\n",
+ PcdGetPtr (PcdFirmwareVersionString)
+ );
+ }
+ Print (L"Press F2 for boot options");
+ } else if (FirmwareVerLength > 0) {
+ Status = gBS->HandleProtocol (
+ gST->ConsoleOutHandle,
+ &gEfiGraphicsOutputProtocolGuid,
+ (VOID **)&GraphicsOutput
+ );
+ if (!EFI_ERROR (Status)) {
+ PosX = (GraphicsOutput->Mode->Info->HorizontalResolution -
+ (StrLen (VERSION_STRING_PREFIX) + FirmwareVerLength) *
+ EFI_GLYPH_WIDTH) / 2;
+ PosY = 0;
+
+ PrintXY (
+ PosX,
+ PosY,
+ NULL,
+ NULL,
+ VERSION_STRING_PREFIX L"%s",
+ PcdGetPtr (PcdFirmwareVersionString)
+ );
+ }
+ }
+
+ //
+ // Connect device specified by BootDiscoverPolicy variable and
+ // refresh Boot order for newly discovered boot devices
+ //
+ BootDiscoveryPolicyHandler ();
+
+ //
+ // On ARM, there is currently no reason to use the phased capsule
+ // update approach where some capsules are dispatched before EndOfDxe
+ // and some are dispatched after. So just handle all capsules here,
+ // when the console is up and we can actually give the user some
+ // feedback about what is going on.
+ //
+ HandleCapsules ();
+
+ //
+ // Register UEFI Shell
+ //
+ Key.ScanCode = SCAN_NULL;
+ Key.UnicodeChar = L's';
+ PlatformRegisterFvBootOption (&gUefiShellFileGuid, L"UEFI Shell", 0, &Key);
+
+ RemoveStaleFvFileOptions ();
+}
+
+/**
+ This function is called each second during the boot manager waits the
+ timeout.
+
+ @param TimeoutRemain The remaining timeout.
+**/
+VOID
+EFIAPI
+PlatformBootManagerWaitCallback (
+ UINT16 TimeoutRemain
+ )
+{
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL_UNION Black;
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL_UNION White;
+ UINT16 Timeout;
+ EFI_STATUS Status;
+
+ Timeout = PcdGet16 (PcdPlatformBootTimeOut);
+
+ Black.Raw = 0x00000000;
+ White.Raw = 0x00FFFFFF;
+
+ Status = BootLogoUpdateProgress (
+ White.Pixel,
+ Black.Pixel,
+ L"Press F2 for boot options",
+ White.Pixel,
+ (Timeout - TimeoutRemain) * 100 / Timeout,
+ 0
+ );
+ if (EFI_ERROR (Status)) {
+ Print (L".");
+ }
+}
+
+/**
+ The function is called when no boot option could be launched,
+ including platform recovery options and options pointing to applications
+ built into firmware volumes.
+
+ If this function returns, BDS attempts to enter an infinite loop.
+**/
+VOID
+EFIAPI
+PlatformBootManagerUnableToBoot (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_BOOT_MANAGER_LOAD_OPTION BootManagerMenu;
+ EFI_BOOT_MANAGER_LOAD_OPTION *BootOptions;
+ UINTN OldBootOptionCount;
+ UINTN NewBootOptionCount;
+
+ //
+ // Record the total number of boot configured boot options
+ //
+ BootOptions = EfiBootManagerGetLoadOptions (
+ &OldBootOptionCount,
+ LoadOptionTypeBoot
+ );
+ EfiBootManagerFreeLoadOptions (BootOptions, OldBootOptionCount);
+
+ //
+ // Connect all devices, and regenerate all boot options
+ //
+ EfiBootManagerConnectAll ();
+ EfiBootManagerRefreshAllBootOption ();
+
+ //
+ // Record the updated number of boot configured boot options
+ //
+ BootOptions = EfiBootManagerGetLoadOptions (
+ &NewBootOptionCount,
+ LoadOptionTypeBoot
+ );
+ EfiBootManagerFreeLoadOptions (BootOptions, NewBootOptionCount);
+
+ //
+ // If the number of configured boot options has changed, reboot
+ // the system so the new boot options will be taken into account
+ // while executing the ordinary BDS bootflow sequence.
+ // *Unless* persistent varstore is being emulated, since we would
+ // then end up in an endless reboot loop.
+ //
+ if (!PcdGetBool (PcdEmuVariableNvModeEnable)) {
+ if (NewBootOptionCount != OldBootOptionCount) {
+ DEBUG ((
+ DEBUG_WARN,
+ "%a: rebooting after refreshing all boot options\n",
+ __FUNCTION__
+ ));
+ gRT->ResetSystem (EfiResetCold, EFI_SUCCESS, 0, NULL);
+ }
+ }
+
+ Status = EfiBootManagerGetBootManagerMenu (&BootManagerMenu);
+ if (EFI_ERROR (Status)) {
+ return;
+ }
+
+ for ( ; ;) {
+ EfiBootManagerBoot (&BootManagerMenu);
+ }
+}
Index: OrangePi/edk2/create-0.9.1.1-f2-patch/file.list
===================================================================
--- OrangePi/edk2/create-0.9.1.1-f2-patch/file.list (nonexistent)
+++ OrangePi/edk2/create-0.9.1.1-f2-patch/file.list (revision 385)
@@ -0,0 +1 @@
+edk2-rk3588-0.9.1.1/edk2-rockchip/Silicon/Rockchip/Library/PlatformBootManagerLib/PlatformBm.c
Index: OrangePi/edk2/patches/README
===================================================================
--- OrangePi/edk2/patches/README (nonexistent)
+++ OrangePi/edk2/patches/README (revision 385)
@@ -0,0 +1,6 @@
+
+/* begin *
+
+ TODO: Leave some comment here.
+
+ * end */
Index: OrangePi/edk2/patches
===================================================================
--- OrangePi/edk2/patches (nonexistent)
+++ OrangePi/edk2/patches (revision 385)
Property changes on: OrangePi/edk2/patches
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: OrangePi/edk2
===================================================================
--- OrangePi/edk2 (nonexistent)
+++ OrangePi/edk2 (revision 385)
Property changes on: OrangePi/edk2
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: OrangePi/u-boot/Makefile
===================================================================
--- OrangePi/u-boot/Makefile (nonexistent)
+++ OrangePi/u-boot/Makefile (revision 385)
@@ -0,0 +1,54 @@
+
+COMPONENT_TARGETS = $(HARDWARE_NOARCH)
+
+
+include ../../../../build-system/constants.mk
+
+
+url = $(DOWNLOAD_SERVER)/sources/U-Boot/OrangePi/u-boot
+
+versions = 2023.10
+
+tarballs = $(addsuffix .tar.xz, $(addprefix u-boot-, $(versions)))
+sha1s = $(addsuffix .sha1sum, $(tarballs))
+
+patches = $(CURDIR)/patches/u-boot-2023.10-suppress-warnings.patch
+
+.NOTPARALLEL: $(patches)
+
+
+BUILD_TARGETS = $(tarballs) $(sha1s) $(patches)
+
+
+include ../../../../build-system/core.mk
+
+
+.PHONY: download_clean
+
+
+$(tarballs):
+ @echo -e "\n======= Downloading source tarballs =======" ; \
+ for tarball in $(tarballs) ; do \
+ echo "$(url)/$$tarball" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & \
+ done ; wait
+
+$(sha1s): $(tarballs)
+ @for sha in $@ ; do \
+ echo -e "\n======= Downloading '$$sha' signature =======\n" ; \
+ echo "$(url)/$$sha" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & wait %1 ; \
+ touch $$sha ; \
+ echo -e "\n======= Check the '$$sha' sha1sum =======\n" ; \
+ sha1sum --check $$sha ; ret="$$?" ; \
+ if [ "$$ret" == "1" ]; then \
+ echo -e "\n======= ERROR: Bad '$$sha' sha1sum =======\n" ; \
+ exit 1 ; \
+ fi ; \
+ done
+
+$(patches): $(sha1s)
+ @echo -e "\n======= Create Patches =======\n" ; \
+ ( cd create-2023.10-suppress-warnings-patch ; ./create.patch.sh ) ; \
+ echo -e "\n"
+
+download_clean:
+ @rm -f $(tarballs) $(sha1s) $(patches)
Index: OrangePi/u-boot/create-2023.10-suppress-warnings-patch/create.patch.sh
===================================================================
--- OrangePi/u-boot/create-2023.10-suppress-warnings-patch/create.patch.sh (nonexistent)
+++ OrangePi/u-boot/create-2023.10-suppress-warnings-patch/create.patch.sh (revision 385)
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+VERSION=2023.10
+
+tar --files-from=file.list -xJvf ../u-boot-$VERSION.tar.xz
+mv u-boot-$VERSION u-boot-$VERSION-orig
+
+cp -rf ./u-boot-$VERSION-new ./u-boot-$VERSION
+
+diff --unified -Nr u-boot-$VERSION-orig u-boot-$VERSION > u-boot-$VERSION-suppress-warnings.patch
+
+mv u-boot-$VERSION-suppress-warnings.patch ../patches
+
+rm -rf ./u-boot-$VERSION
+rm -rf ./u-boot-$VERSION-orig
Property changes on: OrangePi/u-boot/create-2023.10-suppress-warnings-patch/create.patch.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: OrangePi/u-boot/create-2023.10-suppress-warnings-patch/file.list
===================================================================
--- OrangePi/u-boot/create-2023.10-suppress-warnings-patch/file.list (nonexistent)
+++ OrangePi/u-boot/create-2023.10-suppress-warnings-patch/file.list (revision 385)
@@ -0,0 +1 @@
+u-boot-2023.10/Makefile
Index: OrangePi/u-boot/create-2023.10-suppress-warnings-patch/u-boot-2023.10-new/Makefile
===================================================================
--- OrangePi/u-boot/create-2023.10-suppress-warnings-patch/u-boot-2023.10-new/Makefile (nonexistent)
+++ OrangePi/u-boot/create-2023.10-suppress-warnings-patch/u-boot-2023.10-new/Makefile (revision 385)
@@ -0,0 +1,2489 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+VERSION = 2023
+PATCHLEVEL = 10
+SUBLEVEL =
+EXTRAVERSION =
+NAME =
+
+# *DOCUMENTATION*
+# To see a list of typical targets execute "make help"
+# More info can be located in ./README
+# Comments in this file are targeted only to the developer, do not
+# expect to learn how to build the kernel reading this file.
+
+# Do not use make's built-in rules and variables
+# (this increases performance and avoids hard-to-debug behaviour)
+MAKEFLAGS += -rR
+
+# Determine target architecture for the sandbox
+include include/host_arch.h
+ifeq ("", "$(CROSS_COMPILE)")
+ MK_ARCH="${shell uname -m}"
+else
+ MK_ARCH="${shell echo $(CROSS_COMPILE) | sed -n 's/^[[:space:]]*\([^\/]*\/\)*\([^-]*\)-[^[:space:]]*/\2/p'}"
+endif
+unexport HOST_ARCH
+ifeq ("x86_64", $(MK_ARCH))
+ export HOST_ARCH=$(HOST_ARCH_X86_64)
+else ifneq (,$(findstring $(MK_ARCH), "i386" "i486" "i586" "i686"))
+ export HOST_ARCH=$(HOST_ARCH_X86)
+else ifneq (,$(findstring $(MK_ARCH), "aarch64" "armv8l"))
+ export HOST_ARCH=$(HOST_ARCH_AARCH64)
+else ifneq (,$(findstring $(MK_ARCH), "arm" "armv7" "armv7a" "armv7l"))
+ export HOST_ARCH=$(HOST_ARCH_ARM)
+else ifeq ("riscv32", $(MK_ARCH))
+ export HOST_ARCH=$(HOST_ARCH_RISCV32)
+else ifeq ("riscv64", $(MK_ARCH))
+ export HOST_ARCH=$(HOST_ARCH_RISCV64)
+endif
+undefine MK_ARCH
+
+# Avoid funny character set dependencies
+unexport LC_ALL
+LC_COLLATE=C
+LC_NUMERIC=C
+export LC_COLLATE LC_NUMERIC
+
+# Avoid interference with shell env settings
+unexport GREP_OPTIONS
+
+# We are using a recursive build, so we need to do a little thinking
+# to get the ordering right.
+#
+# Most importantly: sub-Makefiles should only ever modify files in
+# their own directory. If in some directory we have a dependency on
+# a file in another dir (which doesn't happen often, but it's often
+# unavoidable when linking the built-in.o targets which finally
+# turn into vmlinux), we will call a sub make in that other dir, and
+# after that we are sure that everything which is in that other dir
+# is now up to date.
+#
+# The only cases where we need to modify files which have global
+# effects are thus separated out and done before the recursive
+# descending is started. They are now explicitly listed as the
+# prepare rule.
+
+# Beautify output
+# ---------------------------------------------------------------------------
+#
+# Normally, we echo the whole command before executing it. By making
+# that echo $($(quiet)$(cmd)), we now have the possibility to set
+# $(quiet) to choose other forms of output instead, e.g.
+#
+# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
+# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
+#
+# If $(quiet) is empty, the whole command will be printed.
+# If it is set to "quiet_", only the short version will be printed.
+# If it is set to "silent_", nothing will be printed at all, since
+# the variable $(silent_cmd_cc_o_c) doesn't exist.
+#
+# A simple variant is to prefix commands with $(Q) - that's useful
+# for commands that shall be hidden in non-verbose mode.
+#
+# $(Q)ln $@ :<
+#
+# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
+# If KBUILD_VERBOSE equals 1 then the above command is displayed.
+#
+# To put more focus on warnings, be less verbose as default
+# Use 'make V=1' to see the full commands
+
+ifeq ("$(origin V)", "command line")
+ KBUILD_VERBOSE = $(V)
+endif
+ifndef KBUILD_VERBOSE
+ KBUILD_VERBOSE = 0
+endif
+
+ifeq ($(KBUILD_VERBOSE),1)
+ quiet =
+ Q =
+else
+ quiet=quiet_
+ Q = @
+endif
+
+# If the user is running make -s (silent mode), suppress echoing of
+# commands
+
+ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
+ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
+ quiet=silent_
+endif
+else # make-3.8x
+ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
+ quiet=silent_
+endif
+endif
+
+export quiet Q KBUILD_VERBOSE
+
+# kbuild supports saving output files in a separate directory.
+# To locate output files in a separate directory two syntaxes are supported.
+# In both cases the working directory must be the root of the kernel src.
+# 1) O=
+# Use "make O=dir/to/store/output/files/"
+#
+# 2) Set KBUILD_OUTPUT
+# Set the environment variable KBUILD_OUTPUT to point to the directory
+# where the output files shall be placed.
+# export KBUILD_OUTPUT=dir/to/store/output/files/
+# make
+#
+# The O= assignment takes precedence over the KBUILD_OUTPUT environment
+# variable.
+
+# KBUILD_SRC is set on invocation of make in OBJ directory
+# KBUILD_SRC is not intended to be used by the regular user (for now)
+ifeq ($(KBUILD_SRC),)
+
+# OK, Make called in directory where kernel src resides
+# Do we want to locate output files in a separate directory?
+ifeq ("$(origin O)", "command line")
+ KBUILD_OUTPUT := $(O)
+endif
+
+# That's our default target when none is given on the command line
+PHONY := _all
+_all:
+
+# Cancel implicit rules on top Makefile
+$(CURDIR)/Makefile Makefile: ;
+
+ifneq ($(KBUILD_OUTPUT),)
+# Invoke a second make in the output directory, passing relevant variables
+# check that the output directory actually exists
+saved-output := $(KBUILD_OUTPUT)
+KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
+ && /bin/pwd)
+$(if $(KBUILD_OUTPUT),, \
+ $(error failed to create output directory "$(saved-output)"))
+
+# Look for make include files relative to root of kernel src
+#
+# This does not become effective immediately because MAKEFLAGS is re-parsed
+# once after the Makefile is read. It is OK since we are going to invoke
+# 'sub-make' below.
+MAKEFLAGS += --include-dir=$(CURDIR)
+
+PHONY += $(MAKECMDGOALS) sub-make
+
+$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
+ @:
+
+sub-make: FORCE
+ $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
+ -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
+
+# Leave processing to above invocation of make
+skip-makefile := 1
+endif # ifneq ($(KBUILD_OUTPUT),)
+endif # ifeq ($(KBUILD_SRC),)
+
+# We process the rest of the Makefile if this is the final invocation of make
+ifeq ($(skip-makefile),)
+
+# Do not print "Entering directory ...",
+# but we want to display it when entering to the output directory
+# so that IDEs/editors are able to understand relative filenames.
+MAKEFLAGS += --no-print-directory
+
+# Call a source code checker (by default, "sparse") as part of the
+# C compilation.
+#
+# Use 'make C=1' to enable checking of only re-compiled files.
+# Use 'make C=2' to enable checking of *all* source files, regardless
+# of whether they are re-compiled or not.
+#
+# See the file "doc/sparse.txt" for more details, including
+# where to get the "sparse" utility.
+
+ifeq ("$(origin C)", "command line")
+ KBUILD_CHECKSRC = $(C)
+endif
+ifndef KBUILD_CHECKSRC
+ KBUILD_CHECKSRC = 0
+endif
+
+# Use make M=dir to specify directory of external module to build
+# Old syntax make ... SUBDIRS=$PWD is still supported
+# Setting the environment variable KBUILD_EXTMOD take precedence
+ifdef SUBDIRS
+ KBUILD_EXTMOD ?= $(SUBDIRS)
+endif
+
+ifeq ("$(origin M)", "command line")
+ KBUILD_EXTMOD := $(M)
+endif
+
+# If building an external module we do not care about the all: rule
+# but instead _all depend on modules
+PHONY += all
+ifeq ($(KBUILD_EXTMOD),)
+_all: all
+else
+_all: modules
+endif
+
+ifeq ($(KBUILD_SRC),)
+ # building in the source tree
+ srctree := .
+else
+ ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
+ # building in a subdirectory of the source tree
+ srctree := ..
+ else
+ srctree := $(KBUILD_SRC)
+ endif
+endif
+objtree := .
+src := $(srctree)
+obj := $(objtree)
+
+VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
+
+export srctree objtree VPATH
+
+# Make sure CDPATH settings don't interfere
+unexport CDPATH
+
+#########################################################################
+
+HOSTARCH := $(shell uname -m | \
+ sed -e s/i.86/x86/ \
+ -e s/sun4u/sparc64/ \
+ -e s/arm.*/arm/ \
+ -e s/sa110/arm/ \
+ -e s/ppc64/powerpc/ \
+ -e s/ppc/powerpc/ \
+ -e s/macppc/powerpc/\
+ -e s/sh.*/sh/)
+
+HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
+ sed -e 's/\(cygwin\).*/cygwin/')
+
+export HOSTARCH HOSTOS
+
+#########################################################################
+
+# set default to nothing for native builds
+ifeq ($(HOSTARCH),$(ARCH))
+CROSS_COMPILE ?=
+endif
+
+KCONFIG_CONFIG ?= .config
+export KCONFIG_CONFIG
+
+# SHELL used by kbuild
+CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
+ else if [ -x /bin/bash ]; then echo /bin/bash; \
+ else echo sh; fi ; fi)
+
+HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null)
+HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null)
+HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
+
+HOSTCC = cc
+HOSTCXX = c++
+KBUILD_HOSTCFLAGS := -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
+ $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
+KBUILD_HOSTCXXFLAGS := -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
+KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS)
+KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
+
+# With the move to GCC 6, we have implicitly upgraded our language
+# standard to GNU11 (see https://gcc.gnu.org/gcc-5/porting_to.html).
+# Some Linux distributions (including RHEL7, SLES13, Debian 8) still
+# have older compilers as their default, so we make it explicit for
+# these that our host tools are GNU11 (i.e. C11 w/ GNU extensions).
+CSTD_FLAG := -std=gnu11
+KBUILD_HOSTCFLAGS += $(CSTD_FLAG)
+
+ifeq ($(HOSTOS),cygwin)
+KBUILD_HOSTCFLAGS += -ansi
+endif
+
+# Mac OS X / Darwin's C preprocessor is Apple specific. It
+# generates numerous errors and warnings. We want to bypass it
+# and use GNU C's cpp. To do this we pass the -traditional-cpp
+# option to the compiler. Note that the -traditional-cpp flag
+# DOES NOT have the same semantics as GNU C's flag, all it does
+# is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
+#
+# Apple's linker is similar, thanks to the new 2 stage linking
+# multiple symbol definitions are treated as errors, hence the
+# -multiply_defined suppress option to turn off this error.
+#
+ifeq ($(HOSTOS),darwin)
+# get major and minor product version (e.g. '10' and '6' for Snow Leopard)
+DARWIN_MAJOR_VERSION := $(shell sw_vers -productVersion | cut -f 1 -d '.')
+DARWIN_MINOR_VERSION := $(shell sw_vers -productVersion | cut -f 2 -d '.')
+
+os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
+ $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
+
+os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
+ $(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
+
+# Snow Leopards build environment has no longer restrictions as described above
+HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
+KBUILD_HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
+KBUILD_HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
+
+# macOS Mojave (10.14.X)
+# Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
+KBUILD_HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
+endif
+
+# Decide whether to build built-in, modular, or both.
+# Normally, just do built-in.
+
+KBUILD_MODULES :=
+KBUILD_BUILTIN := 1
+
+# If we have only "make modules", don't compile built-in objects.
+# When we're building modules with modversions, we need to consider
+# the built-in objects during the descend as well, in order to
+# make sure the checksums are up to date before we record them.
+
+ifeq ($(MAKECMDGOALS),modules)
+ KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
+endif
+
+# If we have "make <whatever> modules", compile modules
+# in addition to whatever we do anyway.
+# Just "make" or "make all" shall build modules as well
+
+# U-Boot does not need modules
+#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
+# KBUILD_MODULES := 1
+#endif
+
+#ifeq ($(MAKECMDGOALS),)
+# KBUILD_MODULES := 1
+#endif
+
+# Check ths size of a binary:
+# Args:
+# $1: File to check
+# #2: Size limit in bytes (decimal or 0xhex)
+define size_check
+ actual=$$( wc -c $1 | awk '{print $$1}'); \
+ limit=$$( printf "%d" $2 ); \
+ if test $$actual -gt $$limit; then \
+ echo "$1 exceeds file size limit:" >&2; \
+ echo " limit: $$(printf %#x $$limit) bytes" >&2; \
+ echo " actual: $$(printf %#x $$actual) bytes" >&2; \
+ echo " excess: $$(printf %#x $$((actual - limit))) bytes" >&2;\
+ exit 1; \
+ fi
+endef
+export size_check
+
+export KBUILD_MODULES KBUILD_BUILTIN
+export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
+
+# We need some generic definitions (do not try to remake the file).
+scripts/Kbuild.include: ;
+include scripts/Kbuild.include
+
+# Make variables (CC, etc...)
+
+AS = $(CROSS_COMPILE)as
+# Always use GNU ld
+ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
+LD = $(CROSS_COMPILE)ld.bfd
+else
+LD = $(CROSS_COMPILE)ld
+endif
+CC = $(CROSS_COMPILE)gcc
+CPP = $(CC) -E
+AR = $(CROSS_COMPILE)ar
+NM = $(CROSS_COMPILE)nm
+LDR = $(CROSS_COMPILE)ldr
+STRIP = $(CROSS_COMPILE)strip
+OBJCOPY = $(CROSS_COMPILE)objcopy
+OBJDUMP = $(CROSS_COMPILE)objdump
+LEX = flex
+YACC = bison
+AWK = awk
+PERL = perl
+PYTHON ?= python
+PYTHON2 = python2
+PYTHON3 ?= python3
+
+# The devicetree compiler and pylibfdt are automatically built unless DTC is
+# provided. If DTC is provided, it is assumed the pylibfdt is available too.
+DTC_INTREE := $(objtree)/scripts/dtc/dtc
+DTC ?= $(DTC_INTREE)
+DTC_MIN_VERSION := 010406
+
+CHECK = sparse
+
+CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
+ -Wbitwise -Wno-return-void -Wno-unknown-attribute \
+ -D__CHECK_ENDIAN__ $(CF)
+
+KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
+
+KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
+ -Wno-format-security \
+ -fno-builtin -ffreestanding $(CSTD_FLAG)
+KBUILD_CFLAGS += -fshort-wchar -fno-strict-aliasing
+KBUILD_AFLAGS := -D__ASSEMBLY__
+KBUILD_LDFLAGS :=
+
+ifeq ($(cc-name),clang)
+ifneq ($(CROSS_COMPILE),)
+CLANG_TARGET := --target=$(notdir $(CROSS_COMPILE:%-=%))
+LDPPFLAGS += $(CLANG_TARGET)
+GCC_TOOLCHAIN_DIR := $(dir $(shell which $(LD)))
+CLANG_PREFIX := --prefix=$(GCC_TOOLCHAIN_DIR)
+GCC_TOOLCHAIN := $(realpath $(GCC_TOOLCHAIN_DIR)/..)
+endif
+ifneq ($(GCC_TOOLCHAIN),)
+CLANG_GCC_TC := --gcc-toolchain=$(GCC_TOOLCHAIN)
+endif
+KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
+KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
+KBUILD_CFLAGS += $(call cc-option, -no-integrated-as)
+KBUILD_AFLAGS += $(call cc-option, -no-integrated-as)
+endif
+
+# Don't generate position independent code
+KBUILD_CFLAGS += $(call cc-option,-fno-PIE)
+KBUILD_AFLAGS += $(call cc-option,-fno-PIE)
+
+# Read UBOOTRELEASE from include/config/uboot.release (if it exists)
+UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
+UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
+
+export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
+export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
+export CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
+export CPP AR NM LDR STRIP OBJCOPY OBJDUMP KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
+export MAKE LEX YACC AWK PERL PYTHON PYTHON2 PYTHON3
+export HOSTCXX KBUILD_HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS
+
+export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
+export KBUILD_CFLAGS KBUILD_AFLAGS
+
+export CC_VERSION_TEXT := $(shell $(CC) --version | head -n 1)
+
+# When compiling out-of-tree modules, put MODVERDIR in the module
+# tree rather than in the kernel tree. The kernel tree might
+# even be read-only.
+export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
+
+# Files to ignore in find ... statements
+
+export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
+ -name CVS -o -name .pc -o -name .hg -o -name .git \) \
+ -prune -o
+export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
+ --exclude CVS --exclude .pc --exclude .hg --exclude .git
+
+export PYTHON_ENABLE
+
+# This is y if U-Boot should not build any Python tools or libraries. Typically
+# you would need to set this if those tools/libraries (typically binman and
+# pylibfdt) cannot be built by your environment and are provided separately.
+ifeq ($(NO_PYTHON),)
+PYTHON_ENABLE=y
+endif
+
+# ===========================================================================
+# Rules shared between *config targets and build targets
+
+# Basic helpers built in scripts/
+PHONY += scripts_basic
+scripts_basic:
+ $(Q)$(MAKE) $(build)=scripts/basic
+ $(Q)rm -f .tmp_quiet_recordmcount
+
+# To avoid any implicit rule to kick in, define an empty command.
+scripts/basic/%: scripts_basic ;
+
+PHONY += outputmakefile
+# outputmakefile generates a Makefile in the output directory, if using a
+# separate output directory. This allows convenient use of make in the
+# output directory.
+outputmakefile:
+ifneq ($(KBUILD_SRC),)
+ $(Q)ln -fsn $(srctree) source
+ $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile $(srctree)
+endif
+
+# To make sure we do not include .config for any of the *config targets
+# catch them early, and hand them over to scripts/kconfig/Makefile
+# It is allowed to specify more targets when calling make, including
+# mixing *config targets and build targets.
+# For example 'make oldconfig all'.
+# Detect when mixed targets is specified, and make a second invocation
+# of make so .config is not included in this case either (for *config).
+
+version_h := include/generated/version_autogenerated.h
+timestamp_h := include/generated/timestamp_autogenerated.h
+defaultenv_h := include/generated/defaultenv_autogenerated.h
+dt_h := include/generated/dt.h
+env_h := include/generated/environment.h
+
+no-dot-config-targets := clean clobber mrproper distclean \
+ help %docs check% coccicheck \
+ ubootversion backup tests check pcheck qcheck tcheck \
+ pylint pylint_err _pip pip pip_test pip_release
+
+config-targets := 0
+mixed-targets := 0
+dot-config := 1
+
+ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
+ ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
+ dot-config := 0
+ endif
+endif
+
+ifeq ($(KBUILD_EXTMOD),)
+ ifneq ($(filter config %config,$(MAKECMDGOALS)),)
+ config-targets := 1
+ ifneq ($(words $(MAKECMDGOALS)),1)
+ mixed-targets := 1
+ endif
+ endif
+endif
+
+ifeq ($(mixed-targets),1)
+# ===========================================================================
+# We're called with mixed targets (*config and build targets).
+# Handle them one by one.
+
+PHONY += $(MAKECMDGOALS) __build_one_by_one
+
+$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
+ @:
+
+__build_one_by_one:
+ $(Q)set -e; \
+ for i in $(MAKECMDGOALS); do \
+ $(MAKE) -f $(srctree)/Makefile $$i; \
+ done
+
+else
+ifeq ($(config-targets),1)
+# ===========================================================================
+# *config targets only - make sure prerequisites are updated, and descend
+# in scripts/kconfig to make the *config target
+
+KBUILD_DEFCONFIG := sandbox_defconfig
+export KBUILD_DEFCONFIG KBUILD_KCONFIG
+
+config: scripts_basic outputmakefile FORCE
+ $(Q)$(MAKE) $(build)=scripts/kconfig $@
+
+%config: scripts_basic outputmakefile FORCE
+ $(Q)$(MAKE) $(build)=scripts/kconfig $@
+
+else
+# ===========================================================================
+# Build targets only - this includes vmlinux, arch specific targets, clean
+# targets and others. In general all targets except *config targets.
+
+# Additional helpers built in scripts/
+# Carefully list dependencies so we do not try to build scripts twice
+# in parallel
+PHONY += scripts
+scripts: scripts_basic scripts_dtc include/config/auto.conf
+ $(Q)$(MAKE) $(build)=$(@)
+
+ifeq ($(dot-config),1)
+# Read in config
+-include include/config/auto.conf
+
+# Read in dependencies to all Kconfig* files, make sure to run
+# oldconfig if changes are detected.
+-include include/config/auto.conf.cmd
+
+# To avoid any implicit rule to kick in, define an empty command
+$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
+
+# If .config is newer than include/config/auto.conf, someone tinkered
+# with it and forgot to run make oldconfig.
+# if auto.conf.cmd is missing then we are probably in a cleaned tree so
+# we execute the config step to be sure to catch updated Kconfig files
+include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
+ $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
+ @# If the following part fails, include/config/auto.conf should be
+ @# deleted so "make silentoldconfig" will be re-run on the next build.
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
+ { rm -f include/config/auto.conf; false; }
+ @# include/config.h has been updated after "make silentoldconfig".
+ @# We need to touch include/config/auto.conf so it gets newer
+ @# than include/config.h.
+ @# Otherwise, 'make silentoldconfig' would be invoked twice.
+ $(Q)touch include/config/auto.conf
+
+u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
+
+-include include/autoconf.mk
+-include include/autoconf.mk.dep
+
+# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
+# is up-to-date. When we switch to a different board configuration, old CONFIG
+# macros are still remaining in include/config/auto.conf. Without the following
+# gimmick, wrong config.mk would be included leading nasty warnings/errors.
+ifneq ($(wildcard $(KCONFIG_CONFIG)),)
+ifneq ($(wildcard include/config/auto.conf),)
+autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
+ include/config/auto.conf)
+ifeq ($(autoconf_is_old),)
+include config.mk
+include arch/$(ARCH)/Makefile
+endif
+endif
+endif
+
+# These are set by the arch-specific config.mk. Make sure they are exported
+# so they can be used when building an EFI application.
+export EFI_LDS # Filename of EFI link script in arch/$(ARCH)/lib
+export EFI_CRT0 # Filename of EFI CRT0 in arch/$(ARCH)/lib
+export EFI_RELOC # Filename of EFU relocation code in arch/$(ARCH)/lib
+export CFLAGS_EFI # Compiler flags to add when building EFI app
+export CFLAGS_NON_EFI # Compiler flags to remove when building EFI app
+export EFI_TARGET # binutils target if EFI is natively supported
+
+export LTO_ENABLE
+
+# This is y if LTO is enabled for this build. See NO_LTO=1 to disable LTO
+ifeq ($(NO_LTO),)
+LTO_ENABLE=$(if $(CONFIG_LTO),y)
+endif
+
+# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
+# that (or fail if absent). Otherwise, search for a linker script in a
+# standard location.
+
+ifndef LDSCRIPT
+ #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
+ ifdef CONFIG_SYS_LDSCRIPT
+ # need to strip off double quotes
+ LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
+ endif
+endif
+
+# If there is no specified link script, we look in a number of places for it
+ifndef LDSCRIPT
+ ifeq ($(wildcard $(LDSCRIPT)),)
+ LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
+ endif
+ ifeq ($(wildcard $(LDSCRIPT)),)
+ LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
+ endif
+ ifeq ($(wildcard $(LDSCRIPT)),)
+ LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
+ endif
+endif
+
+else
+# Dummy target needed, because used as prerequisite
+include/config/auto.conf: ;
+endif # $(dot-config)
+
+ifdef CONFIG_CC_OPTIMIZE_FOR_DEBUG
+KBUILD_HOSTCFLAGS := -Wall -Wstrict-prototypes -Og -g -fomit-frame-pointer \
+ $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
+# Avoid false positives -Wmaybe-uninitialized
+# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78394
+KBUILD_HOSTCFLAGS += -Wno-maybe-uninitialized
+KBUILD_HOSTCXXFLAGS := -Og -g $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
+endif
+
+#
+# Xtensa linker script cannot be preprocessed with -ansi because of
+# preprocessor operations on strings that don't make C identifiers.
+#
+ifeq ($(CONFIG_XTENSA),)
+LDPPFLAGS += -ansi
+endif
+
+ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+KBUILD_CFLAGS += -Os
+endif
+
+ifdef CONFIG_CC_OPTIMIZE_FOR_SPEED
+KBUILD_CFLAGS += -O2
+endif
+
+ifdef CONFIG_CC_OPTIMIZE_FOR_DEBUG
+KBUILD_CFLAGS += -Og -Wno-maybe-uninitialized
+# Avoid false positives -Wmaybe-uninitialized
+# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78394
+KBUILD_CFLAGS += -Wno-maybe-uninitialized
+endif
+
+LTO_CFLAGS :=
+LTO_FINAL_LDFLAGS :=
+export LTO_CFLAGS LTO_FINAL_LDFLAGS
+ifeq ($(LTO_ENABLE),y)
+ ifeq ($(cc-name),clang)
+ LTO_CFLAGS += -DLTO_ENABLE -flto
+ LTO_FINAL_LDFLAGS += -flto
+
+ AR = $(shell $(CC) -print-prog-name=llvm-ar)
+ NM = $(shell $(CC) -print-prog-name=llvm-nm)
+ else
+ NPROC := $(shell nproc 2>/dev/null || echo 1)
+ LTO_CFLAGS += -DLTO_ENABLE -flto=$(NPROC)
+ LTO_FINAL_LDFLAGS += -fuse-linker-plugin -flto=$(NPROC)
+
+ # use plugin aware tools
+ AR = $(CROSS_COMPILE)gcc-ar
+ NM = $(CROSS_COMPILE)gcc-nm
+ endif
+
+ CFLAGS_NON_EFI += $(LTO_CFLAGS)
+
+ KBUILD_CFLAGS += $(LTO_CFLAGS)
+endif
+
+ifeq ($(CONFIG_STACKPROTECTOR),y)
+KBUILD_CFLAGS += $(call cc-option,-fstack-protector-strong)
+CFLAGS_EFI += $(call cc-option,-fno-stack-protector)
+else
+KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
+endif
+KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
+
+# disable pointer signed / unsigned warnings in gcc 4.0
+KBUILD_CFLAGS += -Wno-pointer-sign
+
+# disable stringop warnings in gcc 8+
+KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
+
+KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds)
+KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds)
+KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow)
+
+# Enabled with W=2, disabled by default as noisy
+KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
+
+# change __FILE__ to the relative path from the srctree
+KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
+
+KBUILD_CFLAGS += -gdwarf-4
+# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
+# option to the assembler.
+KBUILD_AFLAGS += -gdwarf-4
+
+# Report stack usage if supported
+# ARC tools based on GCC 7.1 has an issue with stack usage
+# with naked functions, see commit message for more details
+ifndef CONFIG_ARC
+ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
+ KBUILD_CFLAGS += -fstack-usage
+endif
+endif
+
+KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
+KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
+
+ifdef CONFIG_CC_IS_CLANG
+KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
+KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
+KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
+KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
+# Quiet clang warning: comparison of unsigned expression < 0 is always false
+KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
+# CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
+# source of a reference will be _MergedGlobals and not on of the whitelisted names.
+# See modpost pattern 2
+KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
+KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
+KBUILD_CFLAGS += $(call cc-disable-warning, deprecated-non-prototype)
+endif
+
+# These warnings generated too much noise in a regular build.
+# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+
+# Prohibit date/time macros, which would make the build non-deterministic
+KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
+
+include scripts/Makefile.extrawarn
+
+# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
+KBUILD_CPPFLAGS += $(KCPPFLAGS)
+KBUILD_AFLAGS += $(KAFLAGS)
+KBUILD_CFLAGS += $(KCFLAGS)
+
+KBUILD_LDFLAGS += -z noexecstack
+KBUILD_LDFLAGS += $(call ld-option,--no-warn-rwx-segments)
+
+KBUILD_HOSTCFLAGS += $(if $(CONFIG_TOOLS_DEBUG),-g)
+
+# Use UBOOTINCLUDE when you must reference the include/ directory.
+# Needed to be compatible with the O= option
+UBOOTINCLUDE := \
+ -Iinclude \
+ $(if $(KBUILD_SRC), -I$(srctree)/include) \
+ $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
+ $(if $(CONFIG_HAS_THUMB2), \
+ $(if $(CONFIG_CPU_V7M), \
+ -I$(srctree)/arch/arm/thumb1/include), \
+ -I$(srctree)/arch/arm/thumb1/include)) \
+ -I$(srctree)/arch/$(ARCH)/include \
+ -include $(srctree)/include/linux/kconfig.h
+
+NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+
+# FIX ME
+cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
+ $(NOSTDINC_FLAGS)
+c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
+
+#########################################################################
+# U-Boot objects....order is important (i.e. start must be first)
+
+HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
+
+libs-$(CONFIG_API) += api/
+libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
+libs-y += boot/
+libs-y += cmd/
+libs-y += common/
+libs-$(CONFIG_OF_EMBED) += dts/
+libs-y += env/
+libs-y += lib/
+libs-y += fs/
+libs-y += net/
+libs-y += disk/
+libs-y += drivers/
+libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
+libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
+libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
+libs-y += drivers/usb/cdns3/
+libs-y += drivers/usb/dwc3/
+libs-y += drivers/usb/common/
+libs-y += drivers/usb/emul/
+libs-y += drivers/usb/eth/
+libs-$(CONFIG_USB_DEVICE) += drivers/usb/gadget/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
+libs-y += drivers/usb/host/
+libs-y += drivers/usb/mtu3/
+libs-y += drivers/usb/musb/
+libs-y += drivers/usb/musb-new/
+libs-y += drivers/usb/isp1760/
+libs-y += drivers/usb/phy/
+libs-y += drivers/usb/ulpi/
+ifdef CONFIG_POST
+libs-y += post/
+endif
+libs-$(CONFIG_$(SPL_TPL_)UNIT_TEST) += test/
+libs-$(CONFIG_UT_ENV) += test/env/
+libs-$(CONFIG_UT_OPTEE) += test/optee/
+libs-$(CONFIG_UT_OVERLAY) += test/overlay/
+
+libs-y += $(if $(wildcard $(srctree)/board/$(BOARDDIR)/Makefile),board/$(BOARDDIR)/)
+
+libs-y := $(sort $(libs-y))
+
+u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
+
+u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
+
+libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
+
+u-boot-init := $(head-y)
+u-boot-main := $(libs-y)
+
+
+# Add GCC lib
+ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
+PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
+else
+ifndef CONFIG_CC_IS_CLANG
+PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
+endif
+endif
+PLATFORM_LIBS += $(PLATFORM_LIBGCC)
+
+ifdef CONFIG_CC_COVERAGE
+KBUILD_CFLAGS += --coverage
+PLATFORM_LIBGCC += -lgcov
+endif
+
+export PLATFORM_LIBS
+export PLATFORM_LIBGCC
+
+# Special flags for CPP when processing the linker script.
+# Pass the version down so we can handle backwards compatibility
+# on the fly.
+LDPPFLAGS += \
+ -include $(srctree)/include/u-boot/u-boot.lds.h \
+ -DCPUDIR=$(CPUDIR) \
+ $(shell $(LD) --version | \
+ sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
+
+#########################################################################
+#########################################################################
+
+ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
+BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
+else
+BOARD_SIZE_CHECK =
+endif
+
+ifneq ($(CONFIG_SPL_SIZE_LIMIT),0x0)
+SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
+else
+SPL_SIZE_CHECK =
+endif
+
+ifneq ($(CONFIG_TPL_SIZE_LIMIT),0x0)
+TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT))
+else
+TPL_SIZE_CHECK =
+endif
+
+ifneq ($(CONFIG_VPL_SIZE_LIMIT),0x0)
+VPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_VPL_SIZE_LIMIT))
+else
+VPL_SIZE_CHECK =
+endif
+
+# Statically apply RELA-style relocations (currently arm64 only)
+# This is useful for arm64 where static relocation needs to be performed on
+# the raw binary, but certain simulators only accept an ELF file (but don't
+# do the relocation).
+ifneq ($(CONFIG_STATIC_RELA),)
+# $(2) is u-boot ELF, $(3) is u-boot bin, $(4) is text base
+quiet_cmd_static_rela = RELOC $@
+cmd_static_rela = \
+ tools/relocate-rela $(3) $(2)
+else
+quiet_cmd_static_rela =
+cmd_static_rela =
+endif
+
+# Always append INPUTS so that arch config.mk's can add custom ones
+INPUTS-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
+
+ifeq ($(CONFIG_SPL_FSL_PBL),y)
+INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
+else
+ifneq ($(CONFIG_NXP_ESBC), y)
+# For Secure Boot The Image needs to be signed and Header must also
+# be included. So The image has to be built explicitly
+INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
+endif
+endif
+INPUTS-$(CONFIG_SPL) += spl/u-boot-spl.bin
+ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy)
+INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
+else
+ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy)
+INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
+else
+INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
+endif
+endif
+INPUTS-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
+INPUTS-$(CONFIG_VPL) += vpl/u-boot-vpl.bin
+
+# Allow omitting the .dtb output if it is not normally used
+INPUTS-$(CONFIG_OF_SEPARATE) += $(if $(CONFIG_OF_OMIT_DTB),dts/dt.dtb,u-boot.dtb)
+ifeq ($(CONFIG_SPL_FRAMEWORK),y)
+INPUTS-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
+endif
+INPUTS-$(CONFIG_SANDBOX) += u-boot.dtb
+ifneq ($(CONFIG_SPL_TARGET),)
+INPUTS-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
+endif
+INPUTS-$(CONFIG_REMAKE_ELF) += u-boot.elf
+INPUTS-$(CONFIG_EFI_APP) += u-boot-app.efi
+INPUTS-$(CONFIG_EFI_STUB) += u-boot-payload.efi
+
+# Generate this input file for binman
+ifeq ($(CONFIG_SPL),)
+INPUTS-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
+endif
+
+# Add optional build target if defined in board/cpu/soc headers
+ifneq ($(CONFIG_BUILD_TARGET),)
+INPUTS-y += $(CONFIG_BUILD_TARGET:"%"=%)
+endif
+
+ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
+INPUTS-y += init_sp_bss_offset_check
+endif
+
+ifeq ($(CONFIG_ARCH_ROCKCHIP)_$(CONFIG_SPL_FRAMEWORK),y_)
+INPUTS-y += u-boot.img
+endif
+
+INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
+ $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
+ $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin)
+
+LDFLAGS_u-boot += $(LDFLAGS_FINAL)
+
+# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
+LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker)
+
+# ld.lld support
+LDFLAGS_u-boot += -z notext $(call ld-option,--apply-dynamic-relocs)
+
+LDFLAGS_u-boot += --build-id=none
+
+ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),)
+LDFLAGS_u-boot += -Ttext $(CONFIG_TEXT_BASE)
+endif
+
+# make the checker run with the right architecture
+CHECKFLAGS += --arch=$(ARCH)
+
+# insure the checker run with the right endianness
+CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian)
+
+# the checker needs the correct machine size
+CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32)
+
+# Normally we fill empty space with 0xff
+quiet_cmd_objcopy = OBJCOPY $@
+cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
+ $(OBJCOPYFLAGS_$(@F)) $< $@
+
+# Provide a version which does not do this, for use by EFI
+quiet_cmd_zobjcopy = OBJCOPY $@
+cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
+
+quiet_cmd_efipayload = OBJCOPY $@
+cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
+
+MKIMAGEOUTPUT ?= /dev/null
+
+quiet_cmd_mkimage = MKIMAGE $@
+cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
+ >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
+
+quiet_cmd_mkfitimage = MKIMAGE $@
+cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) \
+ -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@ \
+ >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
+
+quiet_cmd_cat = CAT $@
+cmd_cat = cat $(filter-out $(PHONY), $^) > $@
+
+append = cat $(filter-out $< $(PHONY), $^) >> $@
+
+quiet_cmd_pad_cat = CAT $@
+cmd_pad_cat = $(cmd_objcopy) && $(append) || { rm -f $@; false; }
+
+quiet_cmd_lzma = LZMA $@
+cmd_lzma = lzma -c -z -k -9 $< > $@
+
+cfg: u-boot.cfg
+
+quiet_cmd_ofcheck = OFCHK $2
+cmd_ofcheck = $(srctree)/scripts/check-of.sh $2 \
+ $(srctree)/scripts/of_allowlist.txt
+
+# Concat the value of all the CONFIGs (result is 'y' or 'yy', etc. )
+got = $(foreach cfg,$(1),$($(cfg)))
+
+# expected value 'y for each one
+expect = $(foreach cfg,$(1),y)
+
+# Show a deprecation message
+# Args:
+# 1: List of options to migrate to (e.g. "CONFIG_DM_MMC CONFIG_BLK")
+# 2: Name of component (e.g . "Ethernet drivers")
+# 3: Release deadline (e.g. "v202.07")
+# 4: Condition to require before checking (e.g. "$(CONFIG_NET)")
+# Note: Script avoids bash construct, hence the strange double 'if'
+# (patches welcome!)
+define deprecated
+ @if [ -n "$(strip $(4))" ]; then if [ "$(got)" != "$(expect)" ]; then \
+ echo >&2 "===================== WARNING ======================"; \
+ echo >&2 "This board does not use $(firstword $(1)) (Driver Model"; \
+ echo >&2 "for $(2)). Please update the board to use"; \
+ echo >&2 "$(firstword $(1)) before the $(3) release. Failure to"; \
+ echo >&2 "update by the deadline may result in board removal."; \
+ echo >&2 "See doc/develop/driver-model/migration.rst for more info."; \
+ echo >&2 "===================================================="; \
+ fi; fi
+
+endef
+
+# Timestamp file to make sure that binman always runs
+.binman_stamp: $(INPUTS-y) FORCE
+ifeq ($(CONFIG_BINMAN),y)
+ $(call if_changed,binman)
+endif
+ @touch $@
+
+all: .binman_stamp
+
+ifeq ($(CONFIG_DEPRECATED),y)
+ $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
+endif
+ifeq ($(CONFIG_OF_EMBED)$(CONFIG_EFI_APP),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
+ @echo >&2 "be used for debugging purposes. Please use"
+ @echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
+ @echo >&2 "See doc/develop/devicetree/control.rst for more info."
+ @echo >&2 "===================================================="
+endif
+ifneq ($(CONFIG_SPL_FIT_GENERATOR),)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board uses CONFIG_SPL_FIT_GENERATOR. Please migrate"
+ @echo >&2 "to binman instead, to avoid the proliferation of"
+ @echo >&2 "arch-specific scripts with no tests."
+ @echo >&2 "===================================================="
+endif
+ $(call deprecated,CONFIG_WDT,DM watchdog,v2019.10,\
+ $(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG))
+ $(call deprecated,CONFIG_DM_I2C,I2C drivers,v2022.04,$(CONFIG_SYS_I2C_LEGACY))
+ @# CFG_SYS_TIMER_RATE has brackets in it for some boards which
+ @# confuses this rule. Use if() to send just a single character which
+ @# is enable to tell 'deprecated' that one of these symbols exists
+ $(call deprecated,CONFIG_TIMER,Timer drivers,v2023.01,$(if $(strip $(CFG_SYS_TIMER_RATE)$(CFG_SYS_TIMER_COUNTER)),x))
+ $(call deprecated,CONFIG_DM_SERIAL,Serial drivers,v2023.04,$(CONFIG_SERIAL))
+ $(call deprecated,CONFIG_DM_SCSI,SCSI drivers,v2023.04,$(CONFIG_SCSI))
+ @# Check that this build does not override OF_HAS_PRIOR_STAGE by
+ @# disabling OF_BOARD.
+ $(call cmd,ofcheck,$(KCONFIG_CONFIG))
+
+PHONY += dtbs
+dtbs: dts/dt.dtb
+ @:
+dts/dt.dtb: u-boot
+ $(Q)$(MAKE) $(build)=dts dtbs
+
+quiet_cmd_copy = COPY $@
+ cmd_copy = cp $< $@
+
+ifeq ($(CONFIG_MULTI_DTB_FIT),y)
+
+ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
+FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
+else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
+FINAL_DTB_CONTAINER = fit-dtb.blob.gz
+else
+FINAL_DTB_CONTAINER = fit-dtb.blob
+endif
+
+fit-dtb.blob.gz: fit-dtb.blob
+ @gzip -kf9 $< > $@
+
+fit-dtb.blob.lzo: fit-dtb.blob
+ @lzop -f9 $< > $@
+
+fit-dtb.blob: dts/dt.dtb FORCE
+ $(call if_changed,mkimage)
+ifneq ($(SOURCE_DATE_EPOCH),)
+ touch -d @$(SOURCE_DATE_EPOCH) fit-dtb.blob
+ chmod 0600 fit-dtb.blob
+endif
+
+MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
+ -a 0 -e 0 -E \
+ $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
+
+MKIMAGEFLAGS_fit-dtb.blob += -B 0x8
+
+ifneq ($(EXT_DTB),)
+u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB)
+ $(call if_changed,cat)
+else
+u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
+ $(call if_changed,cat)
+endif
+
+u-boot.bin: u-boot-fit-dtb.bin FORCE
+ $(call if_changed,copy)
+
+ifneq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
+u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
+ $(call if_changed,cat)
+endif
+
+else ifeq ($(CONFIG_OF_SEPARATE).$(CONFIG_OF_OMIT_DTB),y.)
+
+ifneq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
+u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
+ $(call if_changed,cat)
+endif
+
+u-boot.bin: u-boot-dtb.bin FORCE
+ $(call if_changed,copy)
+
+else
+u-boot.bin: u-boot-nodtb.bin FORCE
+ $(call if_changed,copy)
+endif
+
+# we call Makefile in arch/arm/mach-imx which
+# has targets which are dependent on targets defined
+# here. make could not resolve them and we must ensure
+# that they are finished before calling imx targets
+ifeq ($(CONFIG_MULTI_DTB_FIT),y)
+IMX_DEPS = u-boot-fit-dtb.bin
+endif
+
+%.imx: $(IMX_DEPS) %.bin
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+ $(BOARD_SIZE_CHECK)
+
+%.vyb: %.imx
+ $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
+
+quiet_cmd_copy = COPY $@
+ cmd_copy = cp $< $@
+
+u-boot.dtb: dts/dt.dtb
+ $(call cmd,copy)
+
+OBJCOPYFLAGS_u-boot.hex := -O ihex
+
+OBJCOPYFLAGS_u-boot.srec := -O srec
+
+u-boot.hex u-boot.srec: u-boot FORCE
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec)
+
+u-boot-elf.srec: u-boot.elf FORCE
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-spl.srec = $(OBJCOPYFLAGS_u-boot.srec)
+
+spl/u-boot-spl.srec: spl/u-boot-spl FORCE
+ $(call if_changed,objcopy)
+
+%.scif: %.srec
+ $(Q)$(MAKE) $(build)=arch/arm/mach-rmobile $@
+
+OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
+ $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
+ $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),$(if $(CONFIG_OF_SEPARATE),-R .bootpg -R .resetvec))
+
+binary_size_check: u-boot-nodtb.bin FORCE
+ @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
+ map_size=$(shell cat u-boot.map | \
+ awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
+ | sed 's/0X//g' \
+ | bc); \
+ if [ "" != "$$map_size" ]; then \
+ if test $$map_size -ne $$file_size; then \
+ echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
+ echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \
+ exit 1; \
+ fi; \
+ fi
+
+ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
+ifneq ($(CONFIG_SYS_MALLOC_F),)
+subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN)))
+else
+subtract_sys_malloc_f_len = true
+endif
+# The 1/4 margin below is somewhat arbitrary. The likely initial SP usage is
+# so low that the DTB could probably use 90%+ of the available space, for
+# current values of CONFIG_SYS_INIT_SP_BSS_OFFSET at least. However, let's be
+# safe for now and tweak this later if space becomes tight.
+# A rejected alternative would be to check that some absolute minimum stack
+# space was available. However, since CONFIG_SYS_INIT_SP_BSS_OFFSET is
+# deliberately build-specific, to take account of build-to-build stack usage
+# differences due to different feature sets, there is no common absolute value
+# to check against.
+init_sp_bss_offset_check: u-boot.dtb FORCE
+ @dtb_size=$(shell wc -c u-boot.dtb | awk '{print $$1}') ; \
+ space=$(CONFIG_SYS_INIT_SP_BSS_OFFSET) ; \
+ $(subtract_sys_malloc_f_len) ; \
+ quarter_space=$$(($${space} / 4)) ; \
+ if [ $${dtb_size} -gt $${quarter_space} ]; then \
+ echo "u-boot.dtb is larger than 1 quarter of " >&2 ; \
+ echo "(CONFIG_SYS_INIT_SP_BSS_OFFSET - CONFIG_SYS_MALLOC_F_LEN)" >&2 ; \
+ exit 1 ; \
+ fi
+endif
+
+shell_cmd = { $(call echo-cmd,$(1)) $(cmd_$(1)); }
+
+quiet_cmd_objcopy_uboot = OBJCOPY $@
+ifdef cmd_static_rela
+cmd_objcopy_uboot = $(cmd_objcopy) && $(call shell_cmd,static_rela,$<,$@,$(CONFIG_TEXT_BASE)) || { rm -f $@; false; }
+else
+cmd_objcopy_uboot = $(cmd_objcopy)
+endif
+
+u-boot-nodtb.bin: u-boot FORCE
+ $(call if_changed,objcopy_uboot)
+ $(BOARD_SIZE_CHECK)
+
+u-boot.ldr: u-boot
+ $(CREATE_LDR_ENV)
+ $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
+ $(BOARD_SIZE_CHECK)
+
+# binman
+# ---------------------------------------------------------------------------
+# Use 'make BINMAN_DEBUG=1' to enable debugging
+# Use 'make BINMAN_VERBOSE=3' to set vebosity level
+default_dt := $(if $(DEVICE_TREE),$(DEVICE_TREE),$(CONFIG_DEFAULT_DEVICE_TREE))
+
+quiet_cmd_binman = BINMAN $@
+cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
+ $(foreach f,$(BINMAN_TOOLPATHS),--toolpath $(f)) \
+ --toolpath $(objtree)/tools \
+ $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
+ build -u -d u-boot.dtb -O . -m \
+ --allow-missing $(if $(BINMAN_ALLOW_MISSING),--ignore-missing) \
+ -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
+ -I arch/$(ARCH)/dts -a of-list=$(CONFIG_OF_LIST) \
+ $(foreach f,$(BINMAN_INDIRS),-I $(f)) \
+ -a atf-bl31-path=${BL31} \
+ -a tee-os-path=${TEE} \
+ -a opensbi-path=${OPENSBI} \
+ -a default-dt=$(default_dt) \
+ -a scp-path=$(SCP) \
+ -a rockchip-tpl-path=$(ROCKCHIP_TPL) \
+ -a spl-bss-pad=$(if $(CONFIG_SPL_SEPARATE_BSS),,1) \
+ -a tpl-bss-pad=$(if $(CONFIG_TPL_SEPARATE_BSS),,1) \
+ -a spl-dtb=$(CONFIG_SPL_OF_REAL) \
+ -a tpl-dtb=$(CONFIG_TPL_OF_REAL) \
+ -a pre-load-key-path=${PRE_LOAD_KEY_PATH} \
+ $(BINMAN_$(@F)) 2>/dev/null
+
+OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
+
+OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
+
+u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
+ $(call if_changed,objcopy)
+
+# Boards with more complex image requirements can provide an .its source file
+# or a generator script
+# NOTE: Please do not use this. We are migrating away from Makefile rules to use
+# binman instead.
+ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
+U_BOOT_ITS := u-boot.its
+$(U_BOOT_ITS): $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
+ $(call if_changed,copy)
+else
+ifneq ($(CONFIG_USE_SPL_FIT_GENERATOR),)
+U_BOOT_ITS := u-boot.its
+$(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
+ $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
+ $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
+endif
+endif
+
+ifdef CONFIG_SPL_LOAD_FIT
+MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
+ -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+ -p $(CONFIG_FIT_EXTERNAL_OFFSET) \
+ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
+ $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \
+ $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) \
+ $(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
+else
+MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
+ -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
+MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
+ -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
+u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
+endif
+
+MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
+
+# Some boards have the kwbimage.cfg file written in advance, while some
+# other boards generate it on the fly during the build in the build tree.
+# Let's check if the file exists in the build tree first, otherwise we
+# fall back to use the one in the source tree.
+KWD_CONFIG_FILE = $(shell \
+ if [ -f $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) ]; then \
+ echo -n $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
+ else \
+ echo -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
+ fi)
+
+MKIMAGEFLAGS_u-boot.kwb = -n $(KWD_CONFIG_FILE) \
+ -T kwbimage -a $(CONFIG_TEXT_BASE) -e $(CONFIG_TEXT_BASE)
+
+MKIMAGEFLAGS_u-boot-with-spl.kwb = -n $(KWD_CONFIG_FILE) \
+ -T kwbimage -a $(CONFIG_TEXT_BASE) -e $(CONFIG_TEXT_BASE) \
+ $(if $(KEYDIR),-k $(KEYDIR))
+
+MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
+ -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -A $(ARCH) -T pblimage
+
+UBOOT_BIN := u-boot.bin
+
+MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \
+ -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
+
+u-boot.bin.lzma: u-boot.bin FORCE
+ $(call if_changed,lzma)
+
+u-boot-lzma.img: u-boot.bin.lzma FORCE
+ $(call if_changed,mkimage)
+
+u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
+ $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
+ $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX),dts/dt.dtb) \
+ ,$(UBOOT_BIN)) FORCE
+ $(call if_changed,mkimage)
+ $(BOARD_SIZE_CHECK)
+
+ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
+MKIMAGEFLAGS_u-boot.itb =
+else
+MKIMAGEFLAGS_u-boot.itb = -E
+endif
+MKIMAGEFLAGS_u-boot.itb += -B 0x8
+
+ifdef U_BOOT_ITS
+u-boot.itb: u-boot-nodtb.bin \
+ $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX),dts/dt.dtb) \
+ $(if $(CONFIG_MULTI_DTB_FIT),$(FINAL_DTB_CONTAINER)) \
+ $(U_BOOT_ITS) FORCE
+ $(call if_changed,mkfitimage)
+ $(BOARD_SIZE_CHECK)
+endif
+
+u-boot-with-spl.kwb: u-boot.bin spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+ $(BOARD_SIZE_CHECK)
+
+u-boot.dis: u-boot
+ $(OBJDUMP) -d $< > $@
+
+ifneq ($(CONFIG_SPL_PAYLOAD),)
+SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
+else
+SPL_PAYLOAD := u-boot.bin
+endif
+
+SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
+
+OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
+ --pad-to=$(CONFIG_SPL_PAD_TO)
+u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
+ $(call if_changed,pad_cat)
+
+ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
+MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
+
+lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
+
+lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
+
+lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
+ $(call if_changed,objcopy)
+
+lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
+ $(call if_changed,cat)
+
+endif
+
+OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
+ --pad-to=$(CONFIG_TPL_PAD_TO)
+tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
+ $(call if_changed,pad_cat)
+
+SPL: spl/u-boot-spl.bin FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
+#ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
+ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
+u-boot.cnt: u-boot.bin FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
+flash.bin: spl/u-boot-spl.bin u-boot.cnt FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+else
+ifeq ($(CONFIG_BINMAN),y)
+flash.bin: spl/u-boot-spl.bin $(INPUTS-y) FORCE
+ $(call if_changed,binman)
+else
+flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+endif
+endif
+#endif
+
+u-boot.uim: u-boot.bin FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
+u-boot-nand.imx: u-boot.imx FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
+u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
+MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_TEXT_BASE)
+
+u-boot.ubl: u-boot-with-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+MKIMAGEFLAGS_u-boot-spl.ais = -s -n "/dev/null" \
+ -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
+spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
+u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
+ $(call if_changed,pad_cat)
+
+u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
+ $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
+u-boot.sb: u-boot.bin spl/u-boot-spl.bin
+ $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
+
+MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
+ -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
+spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+ifneq ($(CONFIG_ARCH_SOCFPGA),)
+quiet_cmd_gensplx4 = GENSPLX4 $@
+cmd_gensplx4 = $(OBJCOPY) -I binary -O binary --gap-fill=0x0 \
+ --pad-to=$(CONFIG_SPL_PAD_TO) \
+ spl/u-boot-spl.sfp spl/u-boot-spl.sfp && \
+ cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
+ spl/u-boot-spl.sfp spl/u-boot-spl.sfp > $@ || { rm -f $@; false; }
+spl/u-boot-splx4.sfp: spl/u-boot-spl.sfp FORCE
+ $(call if_changed,gensplx4)
+
+quiet_cmd_socboot = SOCBOOT $@
+cmd_socboot = cat spl/u-boot-splx4.sfp u-boot.img > $@ || { rm -f $@; false; }
+u-boot-with-spl.sfp: spl/u-boot-splx4.sfp u-boot.img FORCE
+ $(call if_changed,socboot)
+
+quiet_cmd_gensplpadx4 = GENSPLPADX4 $@
+cmd_gensplpadx4 = dd if=/dev/zero of=spl/u-boot-spl.pad bs=64 count=1024 ; \
+ cat spl/u-boot-spl.sfp spl/u-boot-spl.pad \
+ spl/u-boot-spl.sfp spl/u-boot-spl.pad \
+ spl/u-boot-spl.sfp spl/u-boot-spl.pad \
+ spl/u-boot-spl.sfp spl/u-boot-spl.pad > $@ || \
+ { rm -f $@ spl/u-boot-spl.pad; false; }
+u-boot-spl-padx4.sfp: spl/u-boot-spl.sfp FORCE
+ $(call if_changed,gensplpadx4)
+
+quiet_cmd_socnandboot = SOCNANDBOOT $@
+cmd_socnandboot = cat u-boot-spl-padx4.sfp u-boot.img > $@ || { rm -f $@; false; }
+u-boot-with-nand-spl.sfp: u-boot-spl-padx4.sfp u-boot.img FORCE
+ $(call if_changed,socnandboot)
+
+endif
+
+ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
+u-boot-dtb.bin: u-boot-nodtb.bin u-boot.dtb u-boot-br.bin FORCE
+ $(call if_changed,binman)
+
+OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
+u-boot-br.bin: u-boot FORCE
+ $(call if_changed,objcopy)
+endif
+
+quiet_cmd_ldr = LD $@
+cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
+ $(filter-out FORCE,$^) -o $@
+
+ifdef CONFIG_X86
+OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16
+u-boot-x86-start16.bin: u-boot FORCE
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec
+u-boot-x86-reset16.bin: u-boot FORCE
+ $(call if_changed,objcopy)
+
+endif # CONFIG_X86
+
+OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
+u-boot-app.efi: u-boot FORCE
+ $(call if_changed,zobjcopy)
+
+u-boot.bin.o: u-boot.bin FORCE
+ $(call if_changed,efipayload)
+
+u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
+ $(call if_changed_dep,cpp_lds)
+
+# Rule to link the EFI payload which contains a stub and a U-Boot binary
+quiet_cmd_u-boot_payload ?= LD $@
+ cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
+ -T u-boot-payload.lds arch/x86/cpu/call32.o \
+ lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
+ $(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
+
+u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
+ $(call if_changed,u-boot_payload)
+
+OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
+u-boot-payload.efi: u-boot-payload FORCE
+ $(call if_changed,zobjcopy)
+
+u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
+ $(call if_changed,cat)
+
+#Add a target to create boot binary having SPL binary in PBI format
+#concatenated with u-boot binary. It is need by PowerPC SoC having
+#internal SRAM <= 512KB.
+MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
+ -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
+ -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
+
+spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+ifeq ($(ARCH),arm)
+UBOOT_BINLOAD := u-boot.img
+else
+UBOOT_BINLOAD := u-boot.bin
+endif
+
+OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
+ --gap-fill=0xff
+
+u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
+ $(call if_changed,pad_cat)
+
+quiet_cmd_u-boot-elf ?= LD $@
+ cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
+ $(if $(CONFIG_SYS_BIG_ENDIAN),-EB,-EL) \
+ -T u-boot-elf.lds --defsym=$(CONFIG_PLATFORM_ELFENTRY)=$(CONFIG_TEXT_BASE) \
+ -Ttext=$(CONFIG_TEXT_BASE)
+u-boot.elf: u-boot.bin u-boot-elf.lds
+ $(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
+ $(call if_changed,u-boot-elf)
+
+u-boot-elf.lds: arch/u-boot-elf.lds prepare FORCE
+ $(call if_changed_dep,cpp_lds)
+
+# MediaTek's ARM-based u-boot needs a header to contains its load address
+# which is parsed by the BootROM.
+# If the SPL build is enabled, the header will be added to the spl binary,
+# and the spl binary and the u-boot.img will be combined into one file.
+# Otherwise the header will be added to the u-boot.bin directly.
+
+ifeq ($(CONFIG_SPL),y)
+spl/u-boot-spl-mtk.bin: spl/u-boot-spl
+
+u-boot-mtk.bin: u-boot-with-spl.bin
+ $(call if_changed,copy)
+else
+MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
+ -a $(CONFIG_TEXT_BASE) -e $(CONFIG_TEXT_BASE) \
+ -n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
+
+u-boot-mtk.bin: u-boot.bin FORCE
+ $(call if_changed,mkimage)
+endif
+
+quiet_cmd_endian_swap = SWAP $@
+ cmd_endian_swap = $(srctree)/tools/endian-swap.py $< $@
+
+u-boot-swap.bin: u-boot.bin FORCE
+ $(call if_changed,endian_swap)
+
+ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
+
+# Generate linker list symbols references to force compiler to not optimize
+# them away when compiling with LTO
+ifeq ($(LTO_ENABLE),y)
+u-boot-keep-syms-lto := keep-syms-lto.o
+u-boot-keep-syms-lto_c := $(patsubst %.o,%.c,$(u-boot-keep-syms-lto))
+
+quiet_cmd_keep_syms_lto = KSL $@
+ cmd_keep_syms_lto = \
+ $(srctree)/scripts/gen_ll_addressable_symbols.sh $(NM) $^ > $@
+
+quiet_cmd_keep_syms_lto_cc = KSLCC $@
+ cmd_keep_syms_lto_cc = \
+ $(CC) $(filter-out $(LTO_CFLAGS),$(c_flags)) -c -o $@ $<
+
+$(u-boot-keep-syms-lto_c): $(u-boot-main)
+ $(call if_changed,keep_syms_lto)
+$(u-boot-keep-syms-lto): $(u-boot-keep-syms-lto_c)
+ $(call if_changed,keep_syms_lto_cc)
+else
+u-boot-keep-syms-lto :=
+endif
+
+# Rule to link u-boot
+# May be overridden by arch/$(ARCH)/config.mk
+ifeq ($(LTO_ENABLE),y)
+quiet_cmd_u-boot__ ?= LTO $@
+ cmd_u-boot__ ?= \
+ $(CC) -nostdlib -nostartfiles \
+ $(LTO_FINAL_LDFLAGS) $(c_flags) \
+ $(KBUILD_LDFLAGS:%=-Wl,%) $(LDFLAGS_u-boot:%=-Wl,%) -o $@ \
+ -T u-boot.lds $(u-boot-init) \
+ -Wl,--whole-archive \
+ $(u-boot-main) \
+ $(u-boot-keep-syms-lto) \
+ $(PLATFORM_LIBS) \
+ -Wl,--no-whole-archive \
+ -Wl,-Map,u-boot.map; \
+ $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
+else
+quiet_cmd_u-boot__ ?= LD $@
+ cmd_u-boot__ ?= $(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
+ -T u-boot.lds $(u-boot-init) \
+ --whole-archive \
+ $(u-boot-main) \
+ --no-whole-archive \
+ $(PLATFORM_LIBS) -Map u-boot.map; \
+ $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
+endif
+
+quiet_cmd_smap = GEN common/system_map.o
+cmd_smap = \
+ smap=`$(call SYSTEM_MAP,u-boot) | \
+ awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
+ $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
+ -c $(srctree)/common/system_map.c -o common/system_map.o
+
+u-boot: $(u-boot-init) $(u-boot-main) $(u-boot-keep-syms-lto) u-boot.lds FORCE
+ +$(call if_changed,u-boot__)
+ifeq ($(CONFIG_KALLSYMS),y)
+ $(call cmd,smap)
+ $(call cmd,u-boot__) common/system_map.o
+endif
+
+ifeq ($(CONFIG_RISCV),y)
+ @tools/prelink-riscv $@
+endif
+
+quiet_cmd_sym ?= SYM $@
+ cmd_sym ?= $(OBJDUMP) -t $< > $@
+u-boot.sym: u-boot FORCE
+ $(call if_changed,sym)
+
+# Environment processing
+# ---------------------------------------------------------------------------
+
+# Directory where we expect the .env file, if it exists
+ENV_DIR := $(srctree)/board/$(BOARDDIR)
+
+# Basename of .env file, stripping quotes
+ENV_SOURCE_FILE := $(CONFIG_ENV_SOURCE_FILE:"%"=%)
+
+# Filename of .env file
+ENV_FILE_CFG := $(ENV_DIR)/$(ENV_SOURCE_FILE).env
+
+# Default filename, if CONFIG_ENV_SOURCE_FILE is empty
+ENV_FILE_BOARD := $(ENV_DIR)/$(CONFIG_SYS_BOARD:"%"=%).env
+
+# Select between the CONFIG_ENV_SOURCE_FILE and the default one
+ENV_FILE := $(if $(ENV_SOURCE_FILE),$(ENV_FILE_CFG),$(wildcard $(ENV_FILE_BOARD)))
+
+# Run the environment text file through the preprocessor, but only if it is
+# non-empty, to save time and possible build errors if something is wonky with
+# the board.
+# If there is no ENV_FILE, produce an empty output file, to prevent a previous
+# build's file being used in the case of in-tree builds.
+quiet_cmd_gen_envp = ENVP $@
+ cmd_gen_envp = \
+ if [ -s "$(ENV_FILE)" ]; then \
+ $(CPP) -P $(CFLAGS) -x assembler-with-cpp -D__ASSEMBLY__ \
+ -D__UBOOT_CONFIG__ \
+ -I . -I include -I $(srctree)/include \
+ -include linux/kconfig.h -include include/config.h \
+ -I$(srctree)/arch/$(ARCH)/include \
+ $< -o $@; \
+ else \
+ rm -f $@; \
+ touch $@ ; \
+ fi
+include/generated/env.in: include/generated/env.txt
+ $(call cmd,gen_envp)
+
+# Regenerate the environment if it changes
+# We use 'wildcard' since the file is not required to exist (at present), in
+# which case we don't want this dependency, but instead should create an empty
+# file
+# This rule is useful since it shows the source file for the environment
+quiet_cmd_envc = ENVC $@
+ cmd_envc = \
+ if [ -f "$<" ]; then \
+ cat $< > $@; \
+ elif [ -n "$(ENV_SOURCE_FILE)" ]; then \
+ echo "Missing file $(ENV_FILE_CFG)"; \
+ else \
+ touch $@ ; \
+ fi
+
+include/generated/env.txt: $(wildcard $(ENV_FILE)) include/generated/autoconf.h
+ $(call cmd,envc)
+
+# Write out the resulting environment, converted to a C string
+quiet_cmd_gen_envt = ENVT $@
+ cmd_gen_envt = \
+ awk -f $(srctree)/scripts/env2string.awk $< >$@
+$(env_h): include/generated/env.in
+ $(call cmd,gen_envt)
+
+# ---------------------------------------------------------------------------
+
+# The actual objects are generated when descending,
+# make sure no implicit rule kicks in
+$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
+
+# Handle descending into subdirectories listed in $(u-boot-dirs)
+# Preset locale variables to speed up the build process. Limit locale
+# tweaks to this spot to avoid wrong language settings when running
+# make menuconfig etc.
+# Error messages still appears in the original language
+
+PHONY += $(u-boot-dirs)
+$(u-boot-dirs): prepare scripts
+ $(Q)$(MAKE) $(build)=$@
+
+tools: prepare
+# The "tools" are needed early
+$(filter-out tools, $(u-boot-dirs)): tools
+# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
+# is "yes"), so compile examples after U-Boot is compiled.
+examples: $(filter-out examples, $(u-boot-dirs))
+
+define filechk_uboot.release
+ echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
+endef
+
+# Store (new) UBOOTRELEASE string in include/config/uboot.release
+include/config/uboot.release: include/config/auto.conf FORCE
+ $(call filechk,uboot.release)
+
+
+# Things we need to do before we recursively start building the kernel
+# or the modules are listed in "prepare".
+# A multi level approach is used. prepareN is processed before prepareN-1.
+# archprepare is used in arch Makefiles and when processed asm symlink,
+# version.h and scripts_basic is processed / created.
+
+# Listed in dependency order
+PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
+
+# prepare3 is used to check if we are building in a separate output directory,
+# and if so do:
+# 1) Check that make has not been executed in the kernel src $(srctree)
+prepare3: include/config/uboot.release
+ifneq ($(KBUILD_SRC),)
+ @$(kecho) ' Using $(srctree) as source for U-Boot'
+ $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
+ echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
+ echo >&2 " in the '$(srctree)' directory.";\
+ /bin/false; \
+ fi;
+endif
+
+# prepare2 creates a makefile if using a separate output directory
+prepare2: prepare3 outputmakefile cfg
+
+prepare1: prepare2 $(version_h) $(timestamp_h) $(dt_h) $(env_h) \
+ include/config/auto.conf
+ifeq ($(wildcard $(LDSCRIPT)),)
+ @echo >&2 " Could not find linker script."
+ @/bin/false
+endif
+
+ifeq ($(CONFIG_USE_DEFAULT_ENV_FILE),y)
+prepare1: $(defaultenv_h)
+
+envtools: $(defaultenv_h)
+endif
+
+archprepare: prepare1 scripts_basic
+
+prepare0: archprepare FORCE
+ $(Q)$(MAKE) $(build)=.
+
+# All the preparing..
+prepare: prepare0
+
+# Generate some files
+# ---------------------------------------------------------------------------
+
+# Use sed to remove leading zeros from PATCHLEVEL to avoid using octal numbers
+define filechk_version.h
+ (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
+ echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
+ echo \#define U_BOOT_VERSION_NUM $(VERSION); \
+ echo \#define U_BOOT_VERSION_NUM_PATCH $$(echo $(PATCHLEVEL) | \
+ sed -e "s/^0*//"); \
+ echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
+ echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
+endef
+
+# The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
+# The BSD date on the other hand behaves different and would produce errors
+# with the misused '-d' switch. Respect that and search a working date with
+# well known pre- and suffixes for the GNU variant of date.
+define filechk_timestamp.h
+ (if test -n "$${SOURCE_DATE_EPOCH}"; then \
+ SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
+ DATE=""; \
+ for date in gdate date.gnu date; do \
+ $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
+ done; \
+ if test -n "$${DATE}"; then \
+ LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
+ LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
+ LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
+ LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_EPOCH %s'; \
+ else \
+ return 42; \
+ fi; \
+ else \
+ LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
+ LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
+ LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
+ LC_ALL=C date +'#define U_BOOT_EPOCH %s'; \
+ fi)
+endef
+
+define filechk_defaultenv.h
+ ( { grep -v '^#' | grep -v '^$$' || true ; echo '' ; } | \
+ tr '\n' '\0' | \
+ sed -e 's/\\\x0\s*//g' | \
+ xxd -i ; )
+endef
+
+define filechk_dt.h
+ (if test -n "$${DEVICE_TREE}"; then \
+ echo \#define DEVICE_TREE \"$(DEVICE_TREE)\"; \
+ else \
+ echo \#define DEVICE_TREE CONFIG_DEFAULT_DEVICE_TREE; \
+ fi)
+endef
+
+$(version_h): include/config/uboot.release FORCE
+ $(call filechk,version.h)
+
+$(timestamp_h): $(srctree)/Makefile FORCE
+ $(call filechk,timestamp.h)
+
+$(dt_h): $(srctree)/Makefile FORCE
+ $(call filechk,dt.h)
+
+$(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
+ $(call filechk,defaultenv.h)
+
+# ---------------------------------------------------------------------------
+# Devicetree files
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
+dtstree := arch/$(SRCARCH)/boot/dts
+endif
+
+ifneq ($(dtstree),)
+
+%.dtb: prepare3 scripts_dtc
+ $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
+
+PHONY += dtbs dtbs_install
+dtbs: prepare3 scripts_dtc
+ $(Q)$(MAKE) $(build)=$(dtstree)
+
+dtbs_install:
+ $(Q)$(MAKE) $(dtbinst)=$(dtstree)
+
+endif
+
+# Check dtc and pylibfdt, if DTC is provided, else build them
+PHONY += scripts_dtc
+scripts_dtc: scripts_basic
+ $(Q)if test "$(DTC)" = "$(DTC_INTREE)"; then \
+ $(MAKE) $(build)=scripts/dtc; \
+ else \
+ if ! $(DTC) -v >/dev/null; then \
+ echo '*** Failed to check dtc version: $(DTC)'; \
+ false; \
+ else \
+ if test "$(call dtc-version)" -lt $(DTC_MIN_VERSION); then \
+ echo '*** Your dtc is too old, please upgrade to dtc $(DTC_MIN_VERSION) or newer'; \
+ false; \
+ else \
+ if [ -n "$(CONFIG_PYLIBFDT)" ]; then \
+ if ! echo "import libfdt" | $(PYTHON3) 2>/dev/null; then \
+ echo '*** pylibfdt does not seem to be available with $(PYTHON3)'; \
+ false; \
+ fi; \
+ fi; \
+ fi; \
+ fi; \
+ fi
+
+# ---------------------------------------------------------------------------
+quiet_cmd_cpp_lds = LDS $@
+cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
+ -D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
+
+u-boot.lds: $(LDSCRIPT) prepare FORCE
+ $(call if_changed_dep,cpp_lds)
+
+spl/u-boot-spl.bin: spl/u-boot-spl
+ @:
+ $(SPL_SIZE_CHECK)
+
+spl/u-boot-spl-dtb.bin: spl/u-boot-spl
+ @:
+
+spl/u-boot-spl-dtb.hex: spl/u-boot-spl
+ @:
+
+spl/u-boot-spl: tools prepare $(if $(CONFIG_SPL_OF_CONTROL),dts/dt.dtb)
+ $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
+
+spl/sunxi-spl.bin: spl/u-boot-spl
+ @:
+
+spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
+ @:
+
+spl/u-boot-spl.sfp: spl/u-boot-spl
+ @:
+
+spl/boot.bin: spl/u-boot-spl
+ @:
+
+tpl/u-boot-tpl.bin: tpl/u-boot-tpl
+ @:
+ $(TPL_SIZE_CHECK)
+
+tpl/u-boot-tpl: tools prepare $(if $(CONFIG_TPL_OF_CONTROL),dts/dt.dtb)
+ $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
+
+vpl/u-boot-vpl.bin: vpl/u-boot-vpl
+ @:
+ $(VPL_SIZE_CHECK)
+
+vpl/u-boot-vpl: tools prepare $(if $(CONFIG_TPL_OF_CONTROL),dts/dt.dtb)
+ $(Q)$(MAKE) obj=vpl -f $(srctree)/scripts/Makefile.spl all
+
+TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
+
+FIND := find
+FINDFLAGS := -L
+
+tags ctags:
+ ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
+ -name '*.[chS]' -print`
+ ln -s ctags tags
+
+etags:
+ etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
+ -name '*.[chS]' -print`
+cscope:
+ $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
+ cscope.files
+ @find $(TAG_SUBDIRS) -name '*.[chS]' -type l -print | \
+ grep -xvf - cscope.files > cscope.files.no-symlinks; \
+ mv cscope.files.no-symlinks cscope.files
+ cscope -b -q -k
+
+SYSTEM_MAP = \
+ $(NM) $1 | \
+ grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
+ LC_ALL=C sort
+System.map: u-boot
+ @$(call SYSTEM_MAP,$<) > $@
+
+#########################################################################
+
+# ARM relocations should all be R_ARM_RELATIVE (32-bit) or
+# R_AARCH64_RELATIVE (64-bit).
+checkarmreloc: u-boot
+ @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
+ grep R_A | sort -u`"; \
+ if test "$$RELOC" != "R_ARM_RELATIVE" -a \
+ "$$RELOC" != "R_AARCH64_RELATIVE"; then \
+ echo "$< contains unexpected relocations: $$RELOC"; \
+ false; \
+ fi
+
+tools/version.h: include/version.h
+ $(Q)mkdir -p $(dir $@)
+ $(call if_changed,copy)
+
+envtools: u-boot-initial-env scripts_basic $(version_h) $(timestamp_h) tools/version.h
+ $(Q)$(MAKE) $(build)=tools/env
+
+tools-only: export TOOLS_ONLY=y
+tools-only: scripts_basic $(version_h) $(timestamp_h) tools/version.h
+ $(Q)$(MAKE) $(build)=tools
+
+tools-all: export HOST_TOOLS_ALL=y
+tools-all: envtools tools ;
+
+cross_tools: export CROSS_BUILD_TOOLS=y
+cross_tools: tools ;
+
+.PHONY : CHANGELOG
+CHANGELOG:
+ git log --no-merges U-Boot-1_1_5.. | \
+ unexpand -a | sed -e 's/\s\s*$$//' > $@
+
+#########################################################################
+
+###
+# Cleaning is done on three levels.
+# make clean Delete most generated files
+# Leave enough to build external modules
+# make mrproper Delete the current configuration, and all generated files
+# make distclean Remove editor backup files, patch leftover files and the like
+
+# Directories & files removed with 'make clean'
+CLEAN_DIRS += $(MODVERDIR) \
+ $(foreach d, spl tpl vpl, $(patsubst %,$d/%, \
+ $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
+
+CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
+ include/generated/env.* drivers/video/u_boot_logo.S \
+ tools/version.h u-boot* MLO* SPL System.map fit-dtb.blob* \
+ u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log \
+ lpc32xx-* bl31.c bl31.elf bl31_*.bin image.map tispl.bin* \
+ idbloader.img flash.bin flash.log defconfig keep-syms-lto.c \
+ mkimage-out.spl.mkimage mkimage.spl.mkimage imx-boot.map \
+ itb.fit.fit itb.fit.itb itb.map spl.map mkimage-out.rom.mkimage \
+ mkimage.rom.mkimage rom.map simple-bin.map simple-bin-spi.map \
+ idbloader-spi.img lib/efi_loader/helloworld_efi.S *.itb
+
+# Directories & files removed with 'make mrproper'
+MRPROPER_DIRS += include/config include/generated spl tpl vpl \
+ .tmp_objdiff doc/output include/asm
+
+# Remove include/asm symlink created by U-Boot before v2014.01
+MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
+ ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
+ drivers/video/fonts/*.S include/asm
+
+# clean - Delete most, but leave enough to build external modules
+#
+clean: rm-dirs := $(CLEAN_DIRS)
+clean: rm-files := $(CLEAN_FILES)
+
+clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
+
+clean-dirs := $(addprefix _clean_, $(clean-dirs))
+
+PHONY += $(clean-dirs) clean archclean
+$(clean-dirs):
+ $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
+
+clean: $(clean-dirs)
+ $(call cmd,rmdirs)
+ $(call cmd,rmfiles)
+ @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
+ \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+ -o -name '*.ko.*' -o -name '*.su' -o -name '*.pyc' \
+ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
+ -o -name '*.lex.c' -o -name '*.tab.[ch]' \
+ -o -name '*.asn1.[ch]' \
+ -o -name '*.symtypes' -o -name 'modules.order' \
+ -o -name modules.builtin -o -name '.tmp_*.o.*' \
+ -o -name 'dsdt_generated.aml' -o -name 'dsdt_generated.asl.tmp' \
+ -o -name 'dsdt_generated.c' \
+ -o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
+ -type f -print | xargs rm -f
+
+# mrproper - Delete all generated files, including .config
+#
+mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
+mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
+mrproper-dirs := $(addprefix _mrproper_,scripts)
+
+PHONY += $(mrproper-dirs) mrproper archmrproper
+$(mrproper-dirs):
+ $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
+
+mrproper: clean $(mrproper-dirs)
+ $(call cmd,rmdirs)
+ $(call cmd,rmfiles)
+ @rm -f arch/*/include/asm/arch
+
+# distclean
+#
+PHONY += distclean
+
+distclean: mrproper
+ @find $(srctree) $(RCS_FIND_IGNORE) \
+ \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
+ -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
+ -o -name '.*.rej' -o -name '*%' -o -name 'core' \
+ -o -name '*.pyc' \) \
+ -type f -print | xargs rm -f
+ @rm -f boards.cfg CHANGELOG
+
+# See doc/develop/python_cq.rst
+PHONY += pylint pylint_err
+PYLINT_BASE := scripts/pylint.base
+PYLINT_CUR := pylint.cur
+PYLINT_DIFF := pylint.diff
+pylint:
+ $(Q)echo "Running pylint on all files (summary in $(PYLINT_CUR); output in pylint.out/)"
+ $(Q)mkdir -p pylint.out
+ $(Q)rm -f pylint.out/out*
+ $(Q)find tools test -name "*.py" \
+ | xargs -n1 -P$(shell nproc 2>/dev/null || echo 1) \
+ sh -c 'pylint --reports=y --exit-zero -f parseable --ignore-imports=yes $$@ > pylint.out/$$(echo $$@ | tr / _ | sed s/.py//)' _
+ $(Q)rm -f $(PYLINT_CUR)
+ $(Q)( cd pylint.out; for f in *; do \
+ sed -ne "s/Your code has been rated at \([-0-9.]*\).*/$$f \1/p" $$f; \
+ done ) | sort > $(PYLINT_CUR)
+ $(Q)base=$$(mktemp) cur=$$(mktemp); cut -d' ' -f1 $(PYLINT_BASE) >$$base; \
+ cut -d' ' -f1 $(PYLINT_CUR) >$$cur; \
+ comm -3 $$base $$cur > $(PYLINT_DIFF); \
+ if [ -s $(PYLINT_DIFF) ]; then \
+ echo "Files have been added/removed. Try:\n\tcp $(PYLINT_CUR) $(PYLINT_BASE)"; \
+ echo; \
+ echo "Added files:"; \
+ comm -13 $$base $$cur; \
+ echo; \
+ echo "Removed files:"; \
+ comm -23 $$base $$cur; \
+ false; \
+ else \
+ rm $$base $$cur $(PYLINT_DIFF); \
+ fi
+ $(Q)bad=false; while read base_file base_val <&3 && read cur_file cur_val <&4; do \
+ if awk "BEGIN {exit !($$cur_val < $$base_val)}"; then \
+ echo "$$base_file: Score was $$base_val, now $$cur_val"; \
+ bad=true; fi; \
+ done 3<$(PYLINT_BASE) 4<$(PYLINT_CUR); \
+ if $$bad; then \
+ echo "Some files have regressed, please fix"; \
+ false; \
+ else \
+ echo "No pylint regressions"; \
+ fi
+
+# Check for errors only
+pylint_err:
+ $(Q)pylint -E -j 0 --ignore-imports=yes \
+ $(shell find tools test -name "*.py")
+
+backup:
+ F=`basename $(srctree)` ; cd .. ; \
+ gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
+
+PHONY += _pip pip pip_release
+
+pip_release: PIP_ARGS="--real"
+pip_test: PIP_ARGS=""
+pip: PIP_ARGS="-n"
+
+pip pip_test pip_release: _pip
+
+_pip:
+ scripts/make_pip.sh u_boot_pylib ${PIP_ARGS}
+ scripts/make_pip.sh patman ${PIP_ARGS}
+ scripts/make_pip.sh buildman ${PIP_ARGS}
+ scripts/make_pip.sh dtoc ${PIP_ARGS}
+ scripts/make_pip.sh binman ${PIP_ARGS}
+
+help:
+ @echo 'Cleaning targets:'
+ @echo ' clean - Remove most generated files but keep the config'
+ @echo ' mrproper - Remove all generated files + config + various backup files'
+ @echo ' distclean - mrproper + remove editor backup and patch files'
+ @echo ''
+ @echo 'Configuration targets:'
+ @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
+ @echo ''
+ @echo 'Test targets:'
+ @echo ''
+ @echo ' check - Run all automated tests that use sandbox'
+ @echo ' pcheck - Run quick automated tests in parallel'
+ @echo ' qcheck - Run quick automated tests that use sandbox'
+ @echo ' tcheck - Run quick automated tests on tools'
+ @echo ' pylint - Run pylint on all Python files'
+ @echo ''
+ @echo 'Other generic targets:'
+ @echo ' all - Build all necessary images depending on configuration'
+ @echo ' tests - Build U-Boot for sandbox and run tests'
+ @echo '* u-boot - Build the bare u-boot'
+ @echo ' dir/ - Build all files in dir and below'
+ @echo ' dir/file.[oisS] - Build specified target only'
+ @echo ' dir/file.lst - Build specified mixed source/assembly target only'
+ @echo ' (requires a recent binutils and recent build (System.map))'
+ @echo ' tags/ctags - Generate ctags file for editors'
+ @echo ' etags - Generate etags file for editors'
+ @echo ' cscope - Generate cscope index'
+ @echo ' ubootrelease - Output the release version string (use with make -s)'
+ @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
+ @echo " cfg - Don't build, just create the .cfg files"
+ @echo " envtools - Build only the target-side environment tools"
+ @echo ''
+ @echo 'PyPi / pip targets:'
+ @echo ' pip - Check building of PyPi packages'
+ @echo ' pip_test - Build PyPi pakages and upload to test server'
+ @echo ' pip_release - Build PyPi pakages and upload to release server'
+ @echo ''
+ @echo 'Static analysers'
+ @echo ' checkstack - Generate a list of stack hogs'
+ @echo ' coccicheck - Execute static code analysis with Coccinelle'
+ @echo ''
+ @echo 'Documentation targets:'
+ @$(MAKE) -f $(srctree)/doc/Makefile dochelp
+ @echo ''
+ @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
+ @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
+ @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
+ @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
+ @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
+ @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
+ @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
+ @echo ' 1: warnings which may be relevant and do not occur too often'
+ @echo ' 2: warnings which occur quite often but may still be relevant'
+ @echo ' 3: more obscure warnings, can most likely be ignored'
+ @echo ' Multiple levels can be combined with W=12 or W=123'
+ @echo ''
+ @echo 'Execute "make" or "make all" to build all targets marked with [*] '
+ @echo 'For further info see the ./README file'
+
+tests check:
+ $(srctree)/test/run
+
+pcheck:
+ $(srctree)/test/run parallel
+
+qcheck:
+ $(srctree)/test/run quick
+
+tcheck:
+ $(srctree)/test/run tools
+
+# Documentation targets
+# ---------------------------------------------------------------------------
+DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
+ linkcheckdocs dochelp refcheckdocs texinfodocs infodocs
+PHONY += $(DOC_TARGETS)
+$(DOC_TARGETS): scripts_basic FORCE
+ $(Q)$(MAKE) $(build)=doc $@
+
+PHONY += checkstack ubootrelease ubootversion
+
+checkstack:
+ $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
+ $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
+
+ubootrelease:
+ @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
+
+ubootversion:
+ @echo $(UBOOTVERSION)
+
+# Single targets
+# ---------------------------------------------------------------------------
+# Single targets are compatible with:
+# - build with mixed source and output
+# - build with separate output dir 'make O=...'
+# - external modules
+#
+# target-dir => where to store outputfile
+# build-dir => directory in kernel source tree to use
+
+ifeq ($(KBUILD_EXTMOD),)
+ build-dir = $(patsubst %/,%,$(dir $@))
+ target-dir = $(dir $@)
+else
+ zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
+ build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
+ target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
+endif
+
+%.s: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.i: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.lst: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.s: %.S prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.S prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.symtypes: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+
+# Modules
+/: prepare scripts FORCE
+ $(cmd_crmodverdir)
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir)
+%/: prepare scripts FORCE
+ $(cmd_crmodverdir)
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir)
+%.ko: prepare scripts FORCE
+ $(cmd_crmodverdir)
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir) $(@:.ko=.o)
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
+quiet_cmd_genenv = GENENV $@
+cmd_genenv = \
+ $(objtree)/tools/printinitialenv | \
+ sed -e '/^\s*$$/d' | \
+ sort -t '=' -k 1,1 -s -o $@
+
+u-boot-initial-env: scripts_basic $(env_h) FORCE
+ $(Q)$(MAKE) $(build)=tools $(objtree)/tools/printinitialenv
+ $(call if_changed,genenv)
+
+# Consistency checks
+# ---------------------------------------------------------------------------
+
+PHONY += coccicheck
+
+coccicheck:
+ $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
+
+# FIXME Should go into a make.lib or something
+# ===========================================================================
+
+quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
+ cmd_rmdirs = rm -rf $(rm-dirs)
+
+quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
+ cmd_rmfiles = rm -f $(rm-files)
+
+# read all saved command lines
+
+cmd_files := $(wildcard .*.cmd)
+
+ifneq ($(cmd_files),)
+ $(cmd_files): ; # Do not try to update included dependency files
+ include $(cmd_files)
+endif
+
+endif #ifeq ($(config-targets),1)
+endif #ifeq ($(mixed-targets),1)
+endif # skip-makefile
+
+PHONY += FORCE
+FORCE:
+
+# Declare the contents of the PHONY variable as phony. We keep that
+# information in a variable so we can use it in if_changed and friends.
+.PHONY: $(PHONY)
Index: OrangePi/u-boot/patches/README
===================================================================
--- OrangePi/u-boot/patches/README (nonexistent)
+++ OrangePi/u-boot/patches/README (revision 385)
@@ -0,0 +1,6 @@
+
+/* begin *
+
+ TODO: Leave some comment here.
+
+ * end */
Index: OrangePi/u-boot/patches
===================================================================
--- OrangePi/u-boot/patches (nonexistent)
+++ OrangePi/u-boot/patches (revision 385)
Property changes on: OrangePi/u-boot/patches
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: OrangePi/u-boot
===================================================================
--- OrangePi/u-boot (nonexistent)
+++ OrangePi/u-boot (revision 385)
Property changes on: OrangePi/u-boot
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: OrangePi
===================================================================
--- OrangePi (nonexistent)
+++ OrangePi (revision 385)
Property changes on: OrangePi
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: StarFive/Makefile
===================================================================
--- StarFive/Makefile (nonexistent)
+++ StarFive/Makefile (revision 385)
@@ -0,0 +1,13 @@
+
+COMPONENT_TARGETS = $(HARDWARE_NOARCH)
+
+SOURCE_REQUIRES += ALL_DIRS
+
+
+include ../../../build-system/core.mk
+
+
+download_clean:
+ @true
+
+.PHONY: download_clean
Index: StarFive/Tools/Makefile
===================================================================
--- StarFive/Tools/Makefile (nonexistent)
+++ StarFive/Tools/Makefile (revision 385)
@@ -0,0 +1,45 @@
+
+COMPONENT_TARGETS = $(HARDWARE_NOARCH)
+
+
+include ../../../../build-system/constants.mk
+
+
+url = $(DOWNLOAD_SERVER)/sources/U-Boot/StarFive/Tools
+
+versions = 20231107
+
+tarballs = $(addsuffix .tar.xz, $(addprefix tools-, $(versions)))
+sha1s = $(addsuffix .sha1sum, $(tarballs))
+
+
+BUILD_TARGETS = $(tarballs) $(sha1s)
+
+
+include ../../../../build-system/core.mk
+
+
+.PHONY: download_clean
+
+
+$(tarballs):
+ @echo -e "\n======= Downloading source tarballs =======" ; \
+ for tarball in $(tarballs) ; do \
+ echo "$(url)/$$tarball" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & \
+ done ; wait
+
+$(sha1s): $(tarballs)
+ @for sha in $@ ; do \
+ echo -e "\n======= Downloading '$$sha' signature =======\n" ; \
+ echo "$(url)/$$sha" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & wait %1 ; \
+ touch $$sha ; \
+ echo -e "\n======= Check the '$$sha' sha1sum =======\n" ; \
+ sha1sum --check $$sha ; ret="$$?" ; \
+ if [ "$$ret" == "1" ]; then \
+ echo -e "\n======= ERROR: Bad '$$sha' sha1sum =======\n" ; \
+ exit 1 ; \
+ fi ; \
+ done
+
+download_clean:
+ @rm -f $(tarballs) $(sha1s)
Index: StarFive/Tools
===================================================================
--- StarFive/Tools (nonexistent)
+++ StarFive/Tools (revision 385)
Property changes on: StarFive/Tools
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: StarFive/opensbi/Makefile
===================================================================
--- StarFive/opensbi/Makefile (nonexistent)
+++ StarFive/opensbi/Makefile (revision 385)
@@ -0,0 +1,45 @@
+
+COMPONENT_TARGETS = $(HARDWARE_NOARCH)
+
+
+include ../../../../build-system/constants.mk
+
+
+url = $(DOWNLOAD_SERVER)/sources/U-Boot/StarFive/opensbi
+
+versions = 1.2-3.8.2
+
+tarballs = $(addsuffix .tar.xz, $(addprefix opensbi-, $(versions)))
+sha1s = $(addsuffix .sha1sum, $(tarballs))
+
+
+BUILD_TARGETS = $(tarballs) $(sha1s)
+
+
+include ../../../../build-system/core.mk
+
+
+.PHONY: download_clean
+
+
+$(tarballs):
+ @echo -e "\n======= Downloading source tarballs =======" ; \
+ for tarball in $(tarballs) ; do \
+ echo "$(url)/$$tarball" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & \
+ done ; wait
+
+$(sha1s): $(tarballs)
+ @for sha in $@ ; do \
+ echo -e "\n======= Downloading '$$sha' signature =======\n" ; \
+ echo "$(url)/$$sha" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & wait %1 ; \
+ touch $$sha ; \
+ echo -e "\n======= Check the '$$sha' sha1sum =======\n" ; \
+ sha1sum --check $$sha ; ret="$$?" ; \
+ if [ "$$ret" == "1" ]; then \
+ echo -e "\n======= ERROR: Bad '$$sha' sha1sum =======\n" ; \
+ exit 1 ; \
+ fi ; \
+ done
+
+download_clean:
+ @rm -f $(tarballs) $(sha1s)
Index: StarFive/opensbi
===================================================================
--- StarFive/opensbi (nonexistent)
+++ StarFive/opensbi (revision 385)
Property changes on: StarFive/opensbi
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: StarFive/u-boot/Makefile
===================================================================
--- StarFive/u-boot/Makefile (nonexistent)
+++ StarFive/u-boot/Makefile (revision 385)
@@ -0,0 +1,58 @@
+
+COMPONENT_TARGETS = $(HARDWARE_NOARCH)
+
+
+include ../../../../build-system/constants.mk
+
+
+url = $(DOWNLOAD_SERVER)/sources/U-Boot/StarFive/u-boot
+
+versions = 2021.10-3.8.2
+
+tarballs = $(addsuffix .tar.xz, $(addprefix u-boot-, $(versions)))
+sha1s = $(addsuffix .sha1sum, $(tarballs))
+
+patches = $(CURDIR)/patches/u-boot-2021.10-3.8.2-rwx-permissions.patch
+patches += $(CURDIR)/patches/u-boot-2021.10-3.8.2-vf2-defconfig.patch
+patches += $(CURDIR)/patches/u-boot-2021.10-3.8.2-vf2-bootenv.patch
+
+.NOTPARALLEL: $(patches)
+
+
+BUILD_TARGETS = $(tarballs) $(sha1s) $(patches)
+
+
+include ../../../../build-system/core.mk
+
+
+.PHONY: download_clean
+
+
+$(tarballs):
+ @echo -e "\n======= Downloading source tarballs =======" ; \
+ for tarball in $(tarballs) ; do \
+ echo "$(url)/$$tarball" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & \
+ done ; wait
+
+$(sha1s): $(tarballs)
+ @for sha in $@ ; do \
+ echo -e "\n======= Downloading '$$sha' signature =======\n" ; \
+ echo "$(url)/$$sha" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & wait %1 ; \
+ touch $$sha ; \
+ echo -e "\n======= Check the '$$sha' sha1sum =======\n" ; \
+ sha1sum --check $$sha ; ret="$$?" ; \
+ if [ "$$ret" == "1" ]; then \
+ echo -e "\n======= ERROR: Bad '$$sha' sha1sum =======\n" ; \
+ exit 1 ; \
+ fi ; \
+ done
+
+$(patches): $(sha1s)
+ @echo -e "\n======= Create Patches =======\n" ; \
+ ( cd create-2021.10-3.8.2-rwx-permissions-patch ; ./create.patch.sh ) ; \
+ ( cd create-2021.10-3.8.2-vf2-defconfig-patch ; ./create.patch.sh ) ; \
+ ( cd create-2021.10-3.8.2-vf2-bootenv-patch ; ./create.patch.sh ) ; \
+ echo -e "\n"
+
+download_clean:
+ @rm -f $(tarballs) $(sha1s) $(patches)
Index: StarFive/u-boot/create-2021.10-3.8.2-rwx-permissions-patch/create.patch.sh
===================================================================
--- StarFive/u-boot/create-2021.10-3.8.2-rwx-permissions-patch/create.patch.sh (nonexistent)
+++ StarFive/u-boot/create-2021.10-3.8.2-rwx-permissions-patch/create.patch.sh (revision 385)
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+VERSION=2021.10-3.8.2
+
+tar --files-from=file.list -xJvf ../u-boot-$VERSION.tar.xz
+mv u-boot-$VERSION u-boot-$VERSION-orig
+
+cp -rf ./u-boot-$VERSION-new ./u-boot-$VERSION
+
+diff --unified -Nr u-boot-$VERSION-orig u-boot-$VERSION > u-boot-$VERSION-rwx-permissions.patch
+
+mv u-boot-$VERSION-rwx-permissions.patch ../patches
+
+rm -rf ./u-boot-$VERSION
+rm -rf ./u-boot-$VERSION-orig
Property changes on: StarFive/u-boot/create-2021.10-3.8.2-rwx-permissions-patch/create.patch.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: StarFive/u-boot/create-2021.10-3.8.2-rwx-permissions-patch/file.list
===================================================================
--- StarFive/u-boot/create-2021.10-3.8.2-rwx-permissions-patch/file.list (nonexistent)
+++ StarFive/u-boot/create-2021.10-3.8.2-rwx-permissions-patch/file.list (revision 385)
@@ -0,0 +1,3 @@
+u-boot-2021.10-3.8.2/Makefile
+u-boot-2021.10-3.8.2/scripts/Makefile.lib
+u-boot-2021.10-3.8.2/scripts/Makefile.spl
Index: StarFive/u-boot/create-2021.10-3.8.2-rwx-permissions-patch/u-boot-2021.10-3.8.2-new/Makefile
===================================================================
--- StarFive/u-boot/create-2021.10-3.8.2-rwx-permissions-patch/u-boot-2021.10-3.8.2-new/Makefile (nonexistent)
+++ StarFive/u-boot/create-2021.10-3.8.2-rwx-permissions-patch/u-boot-2021.10-3.8.2-new/Makefile (revision 385)
@@ -0,0 +1,2345 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+VERSION = 2021
+PATCHLEVEL = 10
+SUBLEVEL =
+EXTRAVERSION =
+NAME =
+
+# *DOCUMENTATION*
+# To see a list of typical targets execute "make help"
+# More info can be located in ./README
+# Comments in this file are targeted only to the developer, do not
+# expect to learn how to build the kernel reading this file.
+
+# Do not use make's built-in rules and variables
+# (this increases performance and avoids hard-to-debug behaviour)
+MAKEFLAGS += -rR
+
+# Determine target architecture for the sandbox
+include include/host_arch.h
+ifeq ("", "$(CROSS_COMPILE)")
+ MK_ARCH="${shell uname -m}"
+else
+ MK_ARCH="${shell echo $(CROSS_COMPILE) | sed -n 's/^\s*\([^\/]*\/\)*\([^-]*\)-\S*/\2/p'}"
+endif
+unexport HOST_ARCH
+ifeq ("x86_64", $(MK_ARCH))
+ export HOST_ARCH=$(HOST_ARCH_X86_64)
+else ifneq (,$(findstring $(MK_ARCH), "i386" "i486" "i586" "i686"))
+ export HOST_ARCH=$(HOST_ARCH_X86)
+else ifneq (,$(findstring $(MK_ARCH), "aarch64" "armv8l"))
+ export HOST_ARCH=$(HOST_ARCH_AARCH64)
+else ifneq (,$(findstring $(MK_ARCH), "arm" "armv7" "armv7l"))
+ export HOST_ARCH=$(HOST_ARCH_ARM)
+else ifeq ("riscv32", $(MK_ARCH))
+ export HOST_ARCH=$(HOST_ARCH_RISCV32)
+else ifeq ("riscv64", $(MK_ARCH))
+ export HOST_ARCH=$(HOST_ARCH_RISCV64)
+endif
+undefine MK_ARCH
+
+# Avoid funny character set dependencies
+unexport LC_ALL
+LC_COLLATE=C
+LC_NUMERIC=C
+export LC_COLLATE LC_NUMERIC
+
+# Avoid interference with shell env settings
+unexport GREP_OPTIONS
+
+# We are using a recursive build, so we need to do a little thinking
+# to get the ordering right.
+#
+# Most importantly: sub-Makefiles should only ever modify files in
+# their own directory. If in some directory we have a dependency on
+# a file in another dir (which doesn't happen often, but it's often
+# unavoidable when linking the built-in.o targets which finally
+# turn into vmlinux), we will call a sub make in that other dir, and
+# after that we are sure that everything which is in that other dir
+# is now up to date.
+#
+# The only cases where we need to modify files which have global
+# effects are thus separated out and done before the recursive
+# descending is started. They are now explicitly listed as the
+# prepare rule.
+
+# Beautify output
+# ---------------------------------------------------------------------------
+#
+# Normally, we echo the whole command before executing it. By making
+# that echo $($(quiet)$(cmd)), we now have the possibility to set
+# $(quiet) to choose other forms of output instead, e.g.
+#
+# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
+# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
+#
+# If $(quiet) is empty, the whole command will be printed.
+# If it is set to "quiet_", only the short version will be printed.
+# If it is set to "silent_", nothing will be printed at all, since
+# the variable $(silent_cmd_cc_o_c) doesn't exist.
+#
+# A simple variant is to prefix commands with $(Q) - that's useful
+# for commands that shall be hidden in non-verbose mode.
+#
+# $(Q)ln $@ :<
+#
+# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
+# If KBUILD_VERBOSE equals 1 then the above command is displayed.
+#
+# To put more focus on warnings, be less verbose as default
+# Use 'make V=1' to see the full commands
+
+ifeq ("$(origin V)", "command line")
+ KBUILD_VERBOSE = $(V)
+endif
+ifndef KBUILD_VERBOSE
+ KBUILD_VERBOSE = 0
+endif
+
+ifeq ($(KBUILD_VERBOSE),1)
+ quiet =
+ Q =
+else
+ quiet=quiet_
+ Q = @
+endif
+
+# If the user is running make -s (silent mode), suppress echoing of
+# commands
+
+ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
+ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
+ quiet=silent_
+endif
+else # make-3.8x
+ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
+ quiet=silent_
+endif
+endif
+
+export quiet Q KBUILD_VERBOSE
+
+# kbuild supports saving output files in a separate directory.
+# To locate output files in a separate directory two syntaxes are supported.
+# In both cases the working directory must be the root of the kernel src.
+# 1) O=
+# Use "make O=dir/to/store/output/files/"
+#
+# 2) Set KBUILD_OUTPUT
+# Set the environment variable KBUILD_OUTPUT to point to the directory
+# where the output files shall be placed.
+# export KBUILD_OUTPUT=dir/to/store/output/files/
+# make
+#
+# The O= assignment takes precedence over the KBUILD_OUTPUT environment
+# variable.
+
+# KBUILD_SRC is set on invocation of make in OBJ directory
+# KBUILD_SRC is not intended to be used by the regular user (for now)
+ifeq ($(KBUILD_SRC),)
+
+# OK, Make called in directory where kernel src resides
+# Do we want to locate output files in a separate directory?
+ifeq ("$(origin O)", "command line")
+ KBUILD_OUTPUT := $(O)
+endif
+
+# That's our default target when none is given on the command line
+PHONY := _all
+_all:
+
+# Cancel implicit rules on top Makefile
+$(CURDIR)/Makefile Makefile: ;
+
+ifneq ($(KBUILD_OUTPUT),)
+# Invoke a second make in the output directory, passing relevant variables
+# check that the output directory actually exists
+saved-output := $(KBUILD_OUTPUT)
+KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
+ && /bin/pwd)
+$(if $(KBUILD_OUTPUT),, \
+ $(error failed to create output directory "$(saved-output)"))
+
+# Look for make include files relative to root of kernel src
+#
+# This does not become effective immediately because MAKEFLAGS is re-parsed
+# once after the Makefile is read. It is OK since we are going to invoke
+# 'sub-make' below.
+MAKEFLAGS += --include-dir=$(CURDIR)
+
+PHONY += $(MAKECMDGOALS) sub-make
+
+$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
+ @:
+
+sub-make: FORCE
+ $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
+ -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
+
+# Leave processing to above invocation of make
+skip-makefile := 1
+endif # ifneq ($(KBUILD_OUTPUT),)
+endif # ifeq ($(KBUILD_SRC),)
+
+# We process the rest of the Makefile if this is the final invocation of make
+ifeq ($(skip-makefile),)
+
+# Do not print "Entering directory ...",
+# but we want to display it when entering to the output directory
+# so that IDEs/editors are able to understand relative filenames.
+MAKEFLAGS += --no-print-directory
+
+# Call a source code checker (by default, "sparse") as part of the
+# C compilation.
+#
+# Use 'make C=1' to enable checking of only re-compiled files.
+# Use 'make C=2' to enable checking of *all* source files, regardless
+# of whether they are re-compiled or not.
+#
+# See the file "doc/sparse.txt" for more details, including
+# where to get the "sparse" utility.
+
+ifeq ("$(origin C)", "command line")
+ KBUILD_CHECKSRC = $(C)
+endif
+ifndef KBUILD_CHECKSRC
+ KBUILD_CHECKSRC = 0
+endif
+
+# Use make M=dir to specify directory of external module to build
+# Old syntax make ... SUBDIRS=$PWD is still supported
+# Setting the environment variable KBUILD_EXTMOD take precedence
+ifdef SUBDIRS
+ KBUILD_EXTMOD ?= $(SUBDIRS)
+endif
+
+ifeq ("$(origin M)", "command line")
+ KBUILD_EXTMOD := $(M)
+endif
+
+# If building an external module we do not care about the all: rule
+# but instead _all depend on modules
+PHONY += all
+ifeq ($(KBUILD_EXTMOD),)
+_all: all
+else
+_all: modules
+endif
+
+ifeq ($(KBUILD_SRC),)
+ # building in the source tree
+ srctree := .
+else
+ ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
+ # building in a subdirectory of the source tree
+ srctree := ..
+ else
+ srctree := $(KBUILD_SRC)
+ endif
+endif
+objtree := .
+src := $(srctree)
+obj := $(objtree)
+
+VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
+
+export srctree objtree VPATH
+
+# Make sure CDPATH settings don't interfere
+unexport CDPATH
+
+#########################################################################
+
+HOSTARCH := $(shell uname -m | \
+ sed -e s/i.86/x86/ \
+ -e s/sun4u/sparc64/ \
+ -e s/arm.*/arm/ \
+ -e s/sa110/arm/ \
+ -e s/ppc64/powerpc/ \
+ -e s/ppc/powerpc/ \
+ -e s/macppc/powerpc/\
+ -e s/sh.*/sh/)
+
+HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
+ sed -e 's/\(cygwin\).*/cygwin/')
+
+export HOSTARCH HOSTOS
+
+#########################################################################
+
+# set default to nothing for native builds
+ifeq ($(HOSTARCH),$(ARCH))
+CROSS_COMPILE ?=
+endif
+
+KCONFIG_CONFIG ?= .config
+export KCONFIG_CONFIG
+
+# SHELL used by kbuild
+CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
+ else if [ -x /bin/bash ]; then echo /bin/bash; \
+ else echo sh; fi ; fi)
+
+HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null)
+HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null)
+HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
+
+HOSTCC = cc
+HOSTCXX = c++
+KBUILD_HOSTCFLAGS := -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
+ $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
+KBUILD_HOSTCXXFLAGS := -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
+KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS)
+KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
+
+# With the move to GCC 6, we have implicitly upgraded our language
+# standard to GNU11 (see https://gcc.gnu.org/gcc-5/porting_to.html).
+# Some Linux distributions (including RHEL7, SLES13, Debian 8) still
+# have older compilers as their default, so we make it explicit for
+# these that our host tools are GNU11 (i.e. C11 w/ GNU extensions).
+CSTD_FLAG := -std=gnu11
+ifeq ($(HOSTOS),linux)
+KBUILD_HOSTCFLAGS += $(CSTD_FLAG)
+endif
+
+ifeq ($(HOSTOS),cygwin)
+KBUILD_HOSTCFLAGS += -ansi
+endif
+
+# Mac OS X / Darwin's C preprocessor is Apple specific. It
+# generates numerous errors and warnings. We want to bypass it
+# and use GNU C's cpp. To do this we pass the -traditional-cpp
+# option to the compiler. Note that the -traditional-cpp flag
+# DOES NOT have the same semantics as GNU C's flag, all it does
+# is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
+#
+# Apple's linker is similar, thanks to the new 2 stage linking
+# multiple symbol definitions are treated as errors, hence the
+# -multiply_defined suppress option to turn off this error.
+#
+ifeq ($(HOSTOS),darwin)
+# get major and minor product version (e.g. '10' and '6' for Snow Leopard)
+DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
+DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
+
+os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
+ $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
+
+os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
+ $(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
+
+# Snow Leopards build environment has no longer restrictions as described above
+HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
+KBUILD_HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
+KBUILD_HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
+
+# macOS Mojave (10.14.X)
+# Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
+KBUILD_HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
+endif
+
+# Decide whether to build built-in, modular, or both.
+# Normally, just do built-in.
+
+KBUILD_MODULES :=
+KBUILD_BUILTIN := 1
+
+# If we have only "make modules", don't compile built-in objects.
+# When we're building modules with modversions, we need to consider
+# the built-in objects during the descend as well, in order to
+# make sure the checksums are up to date before we record them.
+
+ifeq ($(MAKECMDGOALS),modules)
+ KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
+endif
+
+# If we have "make <whatever> modules", compile modules
+# in addition to whatever we do anyway.
+# Just "make" or "make all" shall build modules as well
+
+# U-Boot does not need modules
+#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
+# KBUILD_MODULES := 1
+#endif
+
+#ifeq ($(MAKECMDGOALS),)
+# KBUILD_MODULES := 1
+#endif
+
+# Check ths size of a binary:
+# Args:
+# $1: File to check
+# #2: Size limit in bytes (decimal or 0xhex)
+define size_check
+ actual=$$( wc -c $1 | awk '{print $$1}'); \
+ limit=$$( printf "%d" $2 ); \
+ if test $$actual -gt $$limit; then \
+ echo "$1 exceeds file size limit:" >&2; \
+ echo " limit: $$(printf %#x $$limit) bytes" >&2; \
+ echo " actual: $$(printf %#x $$actual) bytes" >&2; \
+ echo " excess: $$(printf %#x $$((actual - limit))) bytes" >&2;\
+ exit 1; \
+ fi
+endef
+export size_check
+
+export KBUILD_MODULES KBUILD_BUILTIN
+export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
+
+# We need some generic definitions (do not try to remake the file).
+scripts/Kbuild.include: ;
+include scripts/Kbuild.include
+
+# Make variables (CC, etc...)
+
+AS = $(CROSS_COMPILE)as
+# Always use GNU ld
+ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
+LD = $(CROSS_COMPILE)ld.bfd
+else
+LD = $(CROSS_COMPILE)ld
+endif
+CC = $(CROSS_COMPILE)gcc
+CPP = $(CC) -E
+AR = $(CROSS_COMPILE)ar
+NM = $(CROSS_COMPILE)nm
+LDR = $(CROSS_COMPILE)ldr
+STRIP = $(CROSS_COMPILE)strip
+OBJCOPY = $(CROSS_COMPILE)objcopy
+OBJDUMP = $(CROSS_COMPILE)objdump
+LEX = flex
+YACC = bison
+AWK = awk
+PERL = perl
+PYTHON ?= python
+PYTHON2 = python2
+PYTHON3 ?= python3
+DTC ?= $(objtree)/scripts/dtc/dtc
+CHECK = sparse
+
+CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
+ -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
+
+KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
+
+KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
+ -Wno-format-security \
+ -fno-builtin -ffreestanding $(CSTD_FLAG)
+KBUILD_CFLAGS += -fshort-wchar -fno-strict-aliasing
+KBUILD_AFLAGS := -D__ASSEMBLY__
+KBUILD_LDFLAGS :=
+
+ifeq ($(cc-name),clang)
+ifneq ($(CROSS_COMPILE),)
+CLANG_TARGET := --target=$(notdir $(CROSS_COMPILE:%-=%))
+GCC_TOOLCHAIN_DIR := $(dir $(shell which $(LD)))
+CLANG_PREFIX := --prefix=$(GCC_TOOLCHAIN_DIR)
+GCC_TOOLCHAIN := $(realpath $(GCC_TOOLCHAIN_DIR)/..)
+endif
+ifneq ($(GCC_TOOLCHAIN),)
+CLANG_GCC_TC := --gcc-toolchain=$(GCC_TOOLCHAIN)
+endif
+KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
+KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
+KBUILD_CFLAGS += $(call cc-option, -no-integrated-as)
+KBUILD_AFLAGS += $(call cc-option, -no-integrated-as)
+endif
+
+# Don't generate position independent code
+KBUILD_CFLAGS += $(call cc-option,-fno-PIE)
+KBUILD_AFLAGS += $(call cc-option,-fno-PIE)
+
+# Read UBOOTRELEASE from include/config/uboot.release (if it exists)
+UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
+UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
+
+export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
+export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
+export CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
+export CPP AR NM LDR STRIP OBJCOPY OBJDUMP KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
+export MAKE LEX YACC AWK PERL PYTHON PYTHON2 PYTHON3
+export HOSTCXX KBUILD_HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS
+
+export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
+export KBUILD_CFLAGS KBUILD_AFLAGS
+
+export CC_VERSION_TEXT := $(shell $(CC) --version | head -n 1)
+
+# When compiling out-of-tree modules, put MODVERDIR in the module
+# tree rather than in the kernel tree. The kernel tree might
+# even be read-only.
+export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
+
+# Files to ignore in find ... statements
+
+export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
+ -name CVS -o -name .pc -o -name .hg -o -name .git \) \
+ -prune -o
+export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
+ --exclude CVS --exclude .pc --exclude .hg --exclude .git
+
+# ===========================================================================
+# Rules shared between *config targets and build targets
+
+# Basic helpers built in scripts/
+PHONY += scripts_basic
+scripts_basic:
+ $(Q)$(MAKE) $(build)=scripts/basic
+ $(Q)rm -f .tmp_quiet_recordmcount
+
+# To avoid any implicit rule to kick in, define an empty command.
+scripts/basic/%: scripts_basic ;
+
+PHONY += outputmakefile
+# outputmakefile generates a Makefile in the output directory, if using a
+# separate output directory. This allows convenient use of make in the
+# output directory.
+outputmakefile:
+ifneq ($(KBUILD_SRC),)
+ $(Q)ln -fsn $(srctree) source
+ $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile $(srctree)
+endif
+
+# To make sure we do not include .config for any of the *config targets
+# catch them early, and hand them over to scripts/kconfig/Makefile
+# It is allowed to specify more targets when calling make, including
+# mixing *config targets and build targets.
+# For example 'make oldconfig all'.
+# Detect when mixed targets is specified, and make a second invocation
+# of make so .config is not included in this case either (for *config).
+
+version_h := include/generated/version_autogenerated.h
+timestamp_h := include/generated/timestamp_autogenerated.h
+defaultenv_h := include/generated/defaultenv_autogenerated.h
+dt_h := include/generated/dt.h
+
+no-dot-config-targets := clean clobber mrproper distclean \
+ help %docs check% coccicheck \
+ ubootversion backup tests check qcheck tcheck
+
+config-targets := 0
+mixed-targets := 0
+dot-config := 1
+
+ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
+ ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
+ dot-config := 0
+ endif
+endif
+
+ifeq ($(KBUILD_EXTMOD),)
+ ifneq ($(filter config %config,$(MAKECMDGOALS)),)
+ config-targets := 1
+ ifneq ($(words $(MAKECMDGOALS)),1)
+ mixed-targets := 1
+ endif
+ endif
+endif
+
+ifeq ($(mixed-targets),1)
+# ===========================================================================
+# We're called with mixed targets (*config and build targets).
+# Handle them one by one.
+
+PHONY += $(MAKECMDGOALS) __build_one_by_one
+
+$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
+ @:
+
+__build_one_by_one:
+ $(Q)set -e; \
+ for i in $(MAKECMDGOALS); do \
+ $(MAKE) -f $(srctree)/Makefile $$i; \
+ done
+
+else
+ifeq ($(config-targets),1)
+# ===========================================================================
+# *config targets only - make sure prerequisites are updated, and descend
+# in scripts/kconfig to make the *config target
+
+KBUILD_DEFCONFIG := sandbox_defconfig
+export KBUILD_DEFCONFIG KBUILD_KCONFIG
+
+config: scripts_basic outputmakefile FORCE
+ $(Q)$(MAKE) $(build)=scripts/kconfig $@
+
+%config: scripts_basic outputmakefile FORCE
+ $(Q)$(MAKE) $(build)=scripts/kconfig $@
+
+else
+# ===========================================================================
+# Build targets only - this includes vmlinux, arch specific targets, clean
+# targets and others. In general all targets except *config targets.
+
+# Additional helpers built in scripts/
+# Carefully list dependencies so we do not try to build scripts twice
+# in parallel
+PHONY += scripts
+scripts: scripts_basic scripts_dtc include/config/auto.conf
+ $(Q)$(MAKE) $(build)=$(@)
+
+ifeq ($(dot-config),1)
+# Read in config
+-include include/config/auto.conf
+
+# Read in dependencies to all Kconfig* files, make sure to run
+# oldconfig if changes are detected.
+-include include/config/auto.conf.cmd
+
+# To avoid any implicit rule to kick in, define an empty command
+$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
+
+# If .config is newer than include/config/auto.conf, someone tinkered
+# with it and forgot to run make oldconfig.
+# if auto.conf.cmd is missing then we are probably in a cleaned tree so
+# we execute the config step to be sure to catch updated Kconfig files
+include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
+ $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
+ @# If the following part fails, include/config/auto.conf should be
+ @# deleted so "make silentoldconfig" will be re-run on the next build.
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
+ { rm -f include/config/auto.conf; false; }
+ @# include/config.h has been updated after "make silentoldconfig".
+ @# We need to touch include/config/auto.conf so it gets newer
+ @# than include/config.h.
+ @# Otherwise, 'make silentoldconfig' would be invoked twice.
+ $(Q)touch include/config/auto.conf
+
+u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
+
+-include include/autoconf.mk
+-include include/autoconf.mk.dep
+
+# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
+# is up-to-date. When we switch to a different board configuration, old CONFIG
+# macros are still remaining in include/config/auto.conf. Without the following
+# gimmick, wrong config.mk would be included leading nasty warnings/errors.
+ifneq ($(wildcard $(KCONFIG_CONFIG)),)
+ifneq ($(wildcard include/config/auto.conf),)
+autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
+ include/config/auto.conf)
+ifeq ($(autoconf_is_old),)
+include config.mk
+include arch/$(ARCH)/Makefile
+endif
+endif
+endif
+
+# These are set by the arch-specific config.mk. Make sure they are exported
+# so they can be used when building an EFI application.
+export EFI_LDS # Filename of EFI link script in arch/$(ARCH)/lib
+export EFI_CRT0 # Filename of EFI CRT0 in arch/$(ARCH)/lib
+export EFI_RELOC # Filename of EFU relocation code in arch/$(ARCH)/lib
+export CFLAGS_EFI # Compiler flags to add when building EFI app
+export CFLAGS_NON_EFI # Compiler flags to remove when building EFI app
+export EFI_TARGET # binutils target if EFI is natively supported
+
+# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
+# that (or fail if absent). Otherwise, search for a linker script in a
+# standard location.
+
+ifndef LDSCRIPT
+ #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
+ ifdef CONFIG_SYS_LDSCRIPT
+ # need to strip off double quotes
+ LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
+ endif
+endif
+
+# If there is no specified link script, we look in a number of places for it
+ifndef LDSCRIPT
+ ifeq ($(wildcard $(LDSCRIPT)),)
+ LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
+ endif
+ ifeq ($(wildcard $(LDSCRIPT)),)
+ LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
+ endif
+ ifeq ($(wildcard $(LDSCRIPT)),)
+ LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
+ endif
+endif
+
+else
+# Dummy target needed, because used as prerequisite
+include/config/auto.conf: ;
+endif # $(dot-config)
+
+#
+# Xtensa linker script cannot be preprocessed with -ansi because of
+# preprocessor operations on strings that don't make C identifiers.
+#
+ifeq ($(CONFIG_XTENSA),)
+LDPPFLAGS += -ansi
+endif
+
+ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+KBUILD_CFLAGS += -Os
+else
+KBUILD_CFLAGS += -O2
+endif
+
+LTO_CFLAGS :=
+LTO_FINAL_LDFLAGS :=
+export LTO_CFLAGS LTO_FINAL_LDFLAGS
+ifdef CONFIG_LTO
+ ifeq ($(cc-name),clang)
+ LTO_CFLAGS += -flto
+ LTO_FINAL_LDFLAGS += -flto
+
+ AR = $(shell $(CC) -print-prog-name=llvm-ar)
+ NM = $(shell $(CC) -print-prog-name=llvm-nm)
+ else
+ NPROC := $(shell nproc 2>/dev/null || echo 1)
+ LTO_CFLAGS += -flto=$(NPROC)
+ LTO_FINAL_LDFLAGS += -fuse-linker-plugin -flto=$(NPROC)
+
+ # use plugin aware tools
+ AR = $(CROSS_COMPILE)gcc-ar
+ NM = $(CROSS_COMPILE)gcc-nm
+ endif
+
+ CFLAGS_NON_EFI += $(LTO_CFLAGS)
+
+ KBUILD_CFLAGS += $(LTO_CFLAGS)
+endif
+
+ifeq ($(CONFIG_STACKPROTECTOR),y)
+KBUILD_CFLAGS += $(call cc-option,-fstack-protector-strong)
+CFLAGS_EFI += $(call cc-option,-fno-stack-protector)
+else
+KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
+endif
+KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
+
+# disable pointer signed / unsigned warnings in gcc 4.0
+KBUILD_CFLAGS += -Wno-pointer-sign
+
+# disable stringop warnings in gcc 8+
+KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
+
+KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds)
+KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds)
+KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow)
+
+# Enabled with W=2, disabled by default as noisy
+KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
+
+# change __FILE__ to the relative path from the srctree
+KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
+
+KBUILD_CFLAGS += -g
+# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
+# option to the assembler.
+KBUILD_AFLAGS += -g
+
+# Report stack usage if supported
+# ARC tools based on GCC 7.1 has an issue with stack usage
+# with naked functions, see commit message for more details
+ifndef CONFIG_ARC
+ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
+ KBUILD_CFLAGS += -fstack-usage
+endif
+endif
+
+KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
+KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
+
+ifdef CONFIG_CC_IS_CLANG
+KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
+KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
+KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
+KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
+# Quiet clang warning: comparison of unsigned expression < 0 is always false
+KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
+# CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
+# source of a reference will be _MergedGlobals and not on of the whitelisted names.
+# See modpost pattern 2
+KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
+KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
+endif
+
+# These warnings generated too much noise in a regular build.
+# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+
+# Prohibit date/time macros, which would make the build non-deterministic
+KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
+
+include scripts/Makefile.extrawarn
+
+# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
+KBUILD_CPPFLAGS += $(KCPPFLAGS)
+KBUILD_AFLAGS += $(KAFLAGS)
+KBUILD_CFLAGS += $(KCFLAGS)
+
+KBUILD_HOSTCFLAGS += $(if $(CONFIG_TOOLS_DEBUG),-g)
+
+# Use UBOOTINCLUDE when you must reference the include/ directory.
+# Needed to be compatible with the O= option
+UBOOTINCLUDE := \
+ -Iinclude \
+ $(if $(KBUILD_SRC), -I$(srctree)/include) \
+ $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
+ $(if $(CONFIG_HAS_THUMB2), \
+ $(if $(CONFIG_CPU_V7M), \
+ -I$(srctree)/arch/arm/thumb1/include), \
+ -I$(srctree)/arch/arm/thumb1/include)) \
+ -I$(srctree)/arch/$(ARCH)/include \
+ -include $(srctree)/include/linux/kconfig.h
+
+NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+
+# FIX ME
+cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
+ $(NOSTDINC_FLAGS)
+c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
+
+#########################################################################
+# U-Boot objects....order is important (i.e. start must be first)
+
+HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
+
+libs-$(CONFIG_API) += api/
+libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
+libs-y += cmd/
+libs-y += common/
+libs-$(CONFIG_OF_EMBED) += dts/
+libs-y += env/
+libs-y += lib/
+libs-y += fs/
+libs-y += net/
+libs-y += disk/
+libs-y += drivers/
+libs-y += drivers/dma/
+libs-y += drivers/gpio/
+libs-y += drivers/net/
+libs-y += drivers/net/phy/
+libs-y += drivers/power/ \
+ drivers/power/domain/ \
+ drivers/power/fuel_gauge/ \
+ drivers/power/mfd/ \
+ drivers/power/pmic/ \
+ drivers/power/battery/ \
+ drivers/power/regulator/
+libs-y += drivers/spi/
+libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
+libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
+libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
+libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
+libs-y += drivers/serial/
+libs-y += drivers/usb/cdns3/
+libs-y += drivers/usb/dwc3/
+libs-y += drivers/usb/common/
+libs-y += drivers/usb/emul/
+libs-y += drivers/usb/eth/
+libs-$(CONFIG_USB_DEVICE) += drivers/usb/gadget/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
+libs-y += drivers/usb/host/
+libs-y += drivers/usb/mtu3/
+libs-y += drivers/usb/musb/
+libs-y += drivers/usb/musb-new/
+libs-y += drivers/usb/phy/
+libs-y += drivers/usb/ulpi/
+ifdef CONFIG_POST
+libs-y += post/
+endif
+libs-$(CONFIG_UNIT_TEST) += test/
+libs-$(CONFIG_UT_ENV) += test/env/
+libs-$(CONFIG_UT_OPTEE) += test/optee/
+libs-$(CONFIG_UT_OVERLAY) += test/overlay/
+
+libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
+
+libs-y := $(sort $(libs-y))
+
+u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
+
+u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
+
+libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
+
+u-boot-init := $(head-y)
+u-boot-main := $(libs-y)
+
+
+# Add GCC lib
+ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
+PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
+else
+PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
+endif
+PLATFORM_LIBS += $(PLATFORM_LIBGCC)
+
+ifdef CONFIG_CC_COVERAGE
+KBUILD_CFLAGS += --coverage
+PLATFORM_LIBGCC += -lgcov
+endif
+
+export PLATFORM_LIBS
+export PLATFORM_LIBGCC
+
+# Special flags for CPP when processing the linker script.
+# Pass the version down so we can handle backwards compatibility
+# on the fly.
+LDPPFLAGS += \
+ -include $(srctree)/include/u-boot/u-boot.lds.h \
+ -DCPUDIR=$(CPUDIR) \
+ $(shell $(LD) --version | \
+ sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
+
+#########################################################################
+#########################################################################
+
+ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
+BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
+else
+BOARD_SIZE_CHECK =
+endif
+
+ifneq ($(CONFIG_SPL_SIZE_LIMIT),0x0)
+SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
+else
+SPL_SIZE_CHECK =
+endif
+
+ifneq ($(CONFIG_TPL_SIZE_LIMIT),0x0)
+TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT))
+else
+TPL_SIZE_CHECK =
+endif
+
+# Statically apply RELA-style relocations (currently arm64 only)
+# This is useful for arm64 where static relocation needs to be performed on
+# the raw binary, but certain simulators only accept an ELF file (but don't
+# do the relocation).
+ifneq ($(CONFIG_STATIC_RELA),)
+# $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
+quiet_cmd_static_rela = RELOC $@
+cmd_static_rela = \
+ start=$$($(NM) $(2) | grep __rel_dyn_start | cut -f 1 -d ' '); \
+ end=$$($(NM) $(2) | grep __rel_dyn_end | cut -f 1 -d ' '); \
+ tools/relocate-rela $(3) $(4) $$start $$end
+else
+quiet_cmd_static_rela =
+cmd_static_rela =
+endif
+
+# Always append INPUTS so that arch config.mk's can add custom ones
+INPUTS-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
+
+INPUTS-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
+ifeq ($(CONFIG_SPL_FSL_PBL),y)
+INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
+else
+ifneq ($(CONFIG_NXP_ESBC), y)
+# For Secure Boot The Image needs to be signed and Header must also
+# be included. So The image has to be built explicitly
+INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
+endif
+endif
+INPUTS-$(CONFIG_SPL) += spl/u-boot-spl.bin
+ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy)
+INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
+else
+ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy)
+INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
+else
+INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
+endif
+endif
+INPUTS-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
+INPUTS-$(CONFIG_OF_SEPARATE) += u-boot.dtb
+INPUTS-$(CONFIG_BINMAN_STANDALONE_FDT) += u-boot.dtb
+ifeq ($(CONFIG_SPL_FRAMEWORK),y)
+INPUTS-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
+endif
+INPUTS-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
+ifneq ($(CONFIG_SPL_TARGET),)
+INPUTS-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
+endif
+INPUTS-$(CONFIG_REMAKE_ELF) += u-boot.elf
+INPUTS-$(CONFIG_EFI_APP) += u-boot-app.efi
+INPUTS-$(CONFIG_EFI_STUB) += u-boot-payload.efi
+
+# Generate this input file for binman
+ifeq ($(CONFIG_SPL),)
+INPUTS-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
+endif
+
+# Add optional build target if defined in board/cpu/soc headers
+ifneq ($(CONFIG_BUILD_TARGET),)
+INPUTS-y += $(CONFIG_BUILD_TARGET:"%"=%)
+endif
+
+ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
+INPUTS-y += init_sp_bss_offset_check
+endif
+
+ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
+INPUTS-y += u-boot-with-dtb.bin
+endif
+
+ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
+# On ARM64 this target is produced by binman so we don't need this dep
+ifeq ($(CONFIG_ARM64),y)
+ifeq ($(CONFIG_SPL),y)
+# TODO: Get binman to generate this too
+INPUTS-y += u-boot-rockchip.bin
+endif
+else
+ifeq ($(CONFIG_SPL),y)
+# Generate these inputs for binman which will create the output files
+INPUTS-y += idbloader.img u-boot.img
+endif
+endif
+endif
+
+INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
+ $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
+ $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin)
+
+LDFLAGS_u-boot += $(LDFLAGS_FINAL)
+
+# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
+LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker) $(call ld-option,--no-warn-rwx-segments)
+
+LDFLAGS_u-boot += --build-id=none
+
+ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),)
+LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
+endif
+
+# insure the checker run with the right endianness
+CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian)
+
+# the checker needs the correct machine size
+CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32)
+
+# Normally we fill empty space with 0xff
+quiet_cmd_objcopy = OBJCOPY $@
+cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
+ $(OBJCOPYFLAGS_$(@F)) $< $@
+
+# Provide a version which does not do this, for use by EFI
+quiet_cmd_zobjcopy = OBJCOPY $@
+cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
+
+quiet_cmd_efipayload = OBJCOPY $@
+cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
+
+MKIMAGEOUTPUT ?= /dev/null
+
+quiet_cmd_mkimage = MKIMAGE $@
+cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
+ >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
+
+quiet_cmd_mkfitimage = MKIMAGE $@
+cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) \
+ -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@ \
+ >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
+
+quiet_cmd_cat = CAT $@
+cmd_cat = cat $(filter-out $(PHONY), $^) > $@
+
+append = cat $(filter-out $< $(PHONY), $^) >> $@
+
+quiet_cmd_pad_cat = CAT $@
+cmd_pad_cat = $(cmd_objcopy) && $(append) || { rm -f $@; false; }
+
+quiet_cmd_lzma = LZMA $@
+cmd_lzma = lzma -c -z -k -9 $< > $@
+
+cfg: u-boot.cfg
+
+quiet_cmd_cfgcheck = CFGCHK $2
+cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
+ $(srctree)/scripts/config_whitelist.txt $(srctree)
+
+# Concat the value of all the CONFIGs (result is 'y' or 'yy', etc. )
+got = $(foreach cfg,$(1),$($(cfg)))
+
+# expected value 'y for each one
+expect = $(foreach cfg,$(1),y)
+
+# Show a deprecation message
+# Args:
+# 1: List of CONFIG_DM_... to migrate to (e.g. "CONFIG_DM_MMC CONFIG_BLK")
+# 2: Name of component (e.g . "Ethernet drivers")
+# 3: Release deadline (e.g. "v202.07")
+# 4: Condition to require before checking (e.g. "$(CONFIG_NET)")
+# Note: Script avoids bash construct, hence the strange double 'if'
+# (patches welcome!)
+define deprecated
+ @if [ -n "$(strip $(4))" ]; then if [ "$(got)" != "$(expect)" ]; then \
+ echo >&2 "===================== WARNING ======================"; \
+ echo >&2 "This board does not use $(firstword $(1)) (Driver Model"; \
+ echo >&2 "for $(2)). Please update the board to use"; \
+ echo >&2 "$(firstword $(1)) before the $(3) release. Failure to"; \
+ echo >&2 "update by the deadline may result in board removal."; \
+ echo >&2 "See doc/driver-model/migration.rst for more info."; \
+ echo >&2 "===================================================="; \
+ fi; fi
+
+endef
+
+PHONY += inputs
+inputs: $(INPUTS-y)
+
+all: .binman_stamp inputs
+ifeq ($(CONFIG_BINMAN),y)
+ $(call if_changed,binman)
+endif
+
+# Timestamp file to make sure that binman always runs
+.binman_stamp: FORCE
+ @touch $@
+
+ifeq ($(CONFIG_DEPRECATED),y)
+ $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
+endif
+ifeq ($(CONFIG_OF_EMBED),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
+ @echo >&2 "be used for debugging purposes. Please use"
+ @echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
+ @echo >&2 "See doc/README.fdt-control for more info."
+ @echo >&2 "===================================================="
+endif
+ifneq ($(CONFIG_SPL_FIT_GENERATOR),)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board uses CONFIG_SPL_FIT_GENERATOR. Please migrate"
+ @echo >&2 "to binman instead, to avoid the proliferation of"
+ @echo >&2 "arch-specific scripts with no tests."
+ @echo >&2 "===================================================="
+endif
+ifneq ($(CONFIG_DM),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM. CONFIG_DM will be"
+ @echo >&2 "compulsory starting with the v2020.01 release."
+ @echo >&2 "Failure to update may result in board removal."
+ @echo >&2 "See doc/driver-model/migration.rst for more info."
+ @echo >&2 "===================================================="
+endif
+ $(call deprecated,CONFIG_WDT,DM watchdog,v2019.10,\
+ $(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG))
+ $(call deprecated,CONFIG_DM_ETH,Ethernet drivers,v2020.07,$(CONFIG_NET))
+ $(call deprecated,CONFIG_DM_I2C,I2C drivers,v2022.04,$(CONFIG_SYS_I2C_LEGACY))
+ @# Check that this build does not use CONFIG options that we do not
+ @# know about unless they are in Kconfig. All the existing CONFIG
+ @# options are whitelisted, so new ones should not be added.
+ $(call cmd,cfgcheck,u-boot.cfg)
+
+PHONY += dtbs
+dtbs: dts/dt.dtb
+ @:
+dts/dt.dtb: u-boot
+ $(Q)$(MAKE) $(build)=dts dtbs
+
+quiet_cmd_copy = COPY $@
+ cmd_copy = cp $< $@
+
+ifeq ($(CONFIG_MULTI_DTB_FIT),y)
+
+ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
+FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
+else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
+FINAL_DTB_CONTAINER = fit-dtb.blob.gz
+else
+FINAL_DTB_CONTAINER = fit-dtb.blob
+endif
+
+fit-dtb.blob.gz: fit-dtb.blob
+ @gzip -kf9 $< > $@
+
+fit-dtb.blob.lzo: fit-dtb.blob
+ @lzop -f9 $< > $@
+
+fit-dtb.blob: dts/dt.dtb FORCE
+ $(call if_changed,mkimage)
+ifneq ($(SOURCE_DATE_EPOCH),)
+ touch -d @$(SOURCE_DATE_EPOCH) fit-dtb.blob
+ chmod 0600 fit-dtb.blob
+endif
+
+MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
+ -a 0 -e 0 -E \
+ $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
+
+MKIMAGEFLAGS_fit-dtb.blob += -B 0x8
+
+ifneq ($(EXT_DTB),)
+u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB)
+ $(call if_changed,cat)
+else
+u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
+ $(call if_changed,cat)
+endif
+
+u-boot.bin: u-boot-fit-dtb.bin FORCE
+ $(call if_changed,copy)
+
+u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
+ $(call if_changed,cat)
+
+else ifeq ($(CONFIG_OF_SEPARATE),y)
+u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
+ $(call if_changed,cat)
+
+u-boot.bin: u-boot-dtb.bin FORCE
+ $(call if_changed,copy)
+else
+u-boot.bin: u-boot-nodtb.bin FORCE
+ $(call if_changed,copy)
+endif
+
+# we call Makefile in arch/arm/mach-imx which
+# has targets which are dependent on targets defined
+# here. make could not resolve them and we must ensure
+# that they are finished before calling imx targets
+ifeq ($(CONFIG_MULTI_DTB_FIT),y)
+IMX_DEPS = u-boot-fit-dtb.bin
+endif
+
+%.imx: $(IMX_DEPS) %.bin
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+ $(BOARD_SIZE_CHECK)
+
+%.vyb: %.imx
+ $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
+
+quiet_cmd_copy = COPY $@
+ cmd_copy = cp $< $@
+
+u-boot.dtb: dts/dt.dtb
+ $(call cmd,copy)
+
+OBJCOPYFLAGS_u-boot.hex := -O ihex
+
+OBJCOPYFLAGS_u-boot.srec := -O srec
+
+u-boot.hex u-boot.srec: u-boot FORCE
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec)
+
+u-boot-elf.srec: u-boot.elf FORCE
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-spl.srec = $(OBJCOPYFLAGS_u-boot.srec)
+
+spl/u-boot-spl.srec: spl/u-boot-spl FORCE
+ $(call if_changed,objcopy)
+
+%.scif: %.srec
+ $(Q)$(MAKE) $(build)=arch/arm/mach-rmobile $@
+
+OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
+ $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
+ $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
+
+binary_size_check: u-boot-nodtb.bin FORCE
+ @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
+ map_size=$(shell cat u-boot.map | \
+ awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
+ | sed 's/0X//g' \
+ | bc); \
+ if [ "" != "$$map_size" ]; then \
+ if test $$map_size -ne $$file_size; then \
+ echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
+ echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \
+ exit 1; \
+ fi \
+ fi
+
+ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
+ifneq ($(CONFIG_SYS_MALLOC_F_LEN),)
+subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN)))
+else
+subtract_sys_malloc_f_len = true
+endif
+# The 1/4 margin below is somewhat arbitrary. The likely initial SP usage is
+# so low that the DTB could probably use 90%+ of the available space, for
+# current values of CONFIG_SYS_INIT_SP_BSS_OFFSET at least. However, let's be
+# safe for now and tweak this later if space becomes tight.
+# A rejected alternative would be to check that some absolute minimum stack
+# space was available. However, since CONFIG_SYS_INIT_SP_BSS_OFFSET is
+# deliberately build-specific, to take account of build-to-build stack usage
+# differences due to different feature sets, there is no common absolute value
+# to check against.
+init_sp_bss_offset_check: u-boot.dtb FORCE
+ @dtb_size=$(shell wc -c u-boot.dtb | awk '{print $$1}') ; \
+ space=$(CONFIG_SYS_INIT_SP_BSS_OFFSET) ; \
+ $(subtract_sys_malloc_f_len) ; \
+ quarter_space=$$(($${space} / 4)) ; \
+ if [ $${dtb_size} -gt $${quarter_space} ]; then \
+ echo "u-boot.dtb is larger than 1 quarter of " >&2 ; \
+ echo "(CONFIG_SYS_INIT_SP_BSS_OFFSET - CONFIG_SYS_MALLOC_F_LEN)" >&2 ; \
+ exit 1 ; \
+ fi
+endif
+
+shell_cmd = { $(call echo-cmd,$(1)) $(cmd_$(1)); }
+
+quiet_cmd_objcopy_uboot = OBJCOPY $@
+ifdef cmd_static_rela
+cmd_objcopy_uboot = $(cmd_objcopy) && $(call shell_cmd,static_rela,$<,$@,$(CONFIG_SYS_TEXT_BASE)) || { rm -f $@; false; }
+else
+cmd_objcopy_uboot = $(cmd_objcopy)
+endif
+
+u-boot-nodtb.bin: u-boot FORCE
+ $(call if_changed,objcopy_uboot)
+ $(BOARD_SIZE_CHECK)
+
+u-boot.ldr: u-boot
+ $(CREATE_LDR_ENV)
+ $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
+ $(BOARD_SIZE_CHECK)
+
+# binman
+# ---------------------------------------------------------------------------
+# Use 'make BINMAN_DEBUG=1' to enable debugging
+# Use 'make BINMAN_VERBOSE=3' to set vebosity level
+default_dt := $(if $(DEVICE_TREE),$(DEVICE_TREE),$(CONFIG_DEFAULT_DEVICE_TREE))
+
+# Tell binman whether we have a devicetree for SPL and TPL
+have_spl_dt := $(if $(CONFIG_SPL_OF_PLATDATA),,$(CONFIG_SPL_OF_CONTROL))
+have_tpl_dt := $(if $(CONFIG_TPL_OF_PLATDATA),,$(CONFIG_TPL_OF_CONTROL))
+
+quiet_cmd_binman = BINMAN $@
+cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
+ --toolpath $(objtree)/tools \
+ $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
+ build -u -d u-boot.dtb -O . -m --allow-missing \
+ -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
+ -I arch/$(ARCH)/dts -a of-list=$(CONFIG_OF_LIST) \
+ -a atf-bl31-path=${BL31} \
+ -a opensbi-path=${OPENSBI} \
+ -a default-dt=$(default_dt) \
+ -a scp-path=$(SCP) \
+ -a spl-bss-pad=$(if $(CONFIG_SPL_SEPARATE_BSS),,1) \
+ -a tpl-bss-pad=$(if $(CONFIG_TPL_SEPARATE_BSS),,1) \
+ -a spl-dtb=$(have_spl_dt) -a tpl-dtb=$(have_tpl_dt) \
+ $(BINMAN_$(@F))
+
+OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
+
+OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
+
+u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
+ $(call if_changed,objcopy)
+
+#
+# U-Boot entry point, needed for booting of full-blown U-Boot
+# from the SPL U-Boot version.
+#
+ifndef CONFIG_SYS_UBOOT_START
+CONFIG_SYS_UBOOT_START := $(CONFIG_SYS_TEXT_BASE)
+endif
+
+# Boards with more complex image requirements can provide an .its source file
+# or a generator script
+# NOTE: Please do not use this. We are migrating away from Makefile rules to use
+# binman instead.
+ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
+U_BOOT_ITS := u-boot.its
+$(U_BOOT_ITS): $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
+ $(call if_changed,copy)
+else
+ifneq ($(CONFIG_USE_SPL_FIT_GENERATOR),)
+U_BOOT_ITS := u-boot.its
+ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
+U_BOOT_ITS_DEPS += u-boot-nodtb.bin
+endif
+ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
+U_BOOT_ITS_DEPS += u-boot
+endif
+$(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
+ $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
+ $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
+endif
+endif
+
+ifdef CONFIG_SPL_LOAD_FIT
+MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
+ -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+ -p $(CONFIG_FIT_EXTERNAL_OFFSET) \
+ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
+ $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \
+ $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) \
+ $(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
+else
+MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
+ -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
+MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
+ -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
+u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
+endif
+
+MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
+
+# Some boards have the kwbimage.cfg file written in advance, while some
+# other boards generate it on the fly during the build in the build tree.
+# Let's check if the file exists in the build tree first, otherwise we
+# fall back to use the one in the source tree.
+KWD_CONFIG_FILE = $(shell \
+ if [ -f $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) ]; then \
+ echo -n $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
+ else \
+ echo -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
+ fi)
+
+MKIMAGEFLAGS_u-boot.kwb = -n $(KWD_CONFIG_FILE) \
+ -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
+
+MKIMAGEFLAGS_u-boot-spl.kwb = -n $(KWD_CONFIG_FILE) \
+ -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
+ $(if $(KEYDIR),-k $(KEYDIR))
+
+MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
+ -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
+
+ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
+UBOOT_BIN := u-boot-with-dtb.bin
+else
+UBOOT_BIN := u-boot.bin
+endif
+
+MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \
+ -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
+
+u-boot.bin.lzma: u-boot.bin FORCE
+ $(call if_changed,lzma)
+
+u-boot-lzma.img: u-boot.bin.lzma FORCE
+ $(call if_changed,mkimage)
+
+u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
+ $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
+ $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE)$(CONFIG_BINMAN_STANDALONE_FDT),dts/dt.dtb) \
+ ,$(UBOOT_BIN)) FORCE
+ $(call if_changed,mkimage)
+ $(BOARD_SIZE_CHECK)
+
+ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
+MKIMAGEFLAGS_u-boot.itb =
+else
+MKIMAGEFLAGS_u-boot.itb = -E
+endif
+MKIMAGEFLAGS_u-boot.itb += -B 0x8
+
+ifdef U_BOOT_ITS
+u-boot.itb: u-boot-nodtb.bin \
+ $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
+ $(U_BOOT_ITS) FORCE
+ $(call if_changed,mkfitimage)
+ $(BOARD_SIZE_CHECK)
+endif
+
+u-boot-spl.kwb: u-boot.bin spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+u-boot.sha1: u-boot.bin
+ tools/ubsha1 u-boot.bin
+
+u-boot.dis: u-boot
+ $(OBJDUMP) -d $< > $@
+
+ifneq ($(CONFIG_SPL_PAYLOAD),)
+SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
+else
+SPL_PAYLOAD := u-boot.bin
+endif
+
+SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
+
+OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
+ --pad-to=$(CONFIG_SPL_PAD_TO)
+u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
+ $(call if_changed,pad_cat)
+
+ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
+
+# TPL + SPL
+ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy)
+MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T rksd
+tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE
+ $(call if_changed,mkimage)
+idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE
+ $(call if_changed,cat)
+else
+MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T rksd
+idbloader.img: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+endif
+
+ifeq ($(CONFIG_ARM64),y)
+OBJCOPYFLAGS_u-boot-rockchip.bin = -I binary -O binary \
+ --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
+u-boot-rockchip.bin: idbloader.img u-boot.itb FORCE
+ $(call if_changed,pad_cat)
+endif # CONFIG_ARM64
+
+endif # CONFIG_ARCH_ROCKCHIP
+
+ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
+MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
+
+lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
+
+lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
+
+lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
+ $(call if_changed,objcopy)
+
+lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
+ $(call if_changed,cat)
+
+endif
+
+OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
+ --pad-to=$(CONFIG_TPL_PAD_TO)
+tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
+ $(call if_changed,pad_cat)
+
+SPL: spl/u-boot-spl.bin FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
+ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
+ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
+u-boot.cnt: u-boot.bin FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
+flash.bin: spl/u-boot-spl.bin u-boot.cnt FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+else
+ifeq ($(CONFIG_BINMAN),y)
+flash.bin: spl/u-boot-spl.bin $(INPUTS-y) FORCE
+ $(call if_changed,binman)
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+else
+flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+endif
+endif
+endif
+
+u-boot.uim: u-boot.bin FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
+u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
+MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
+
+u-boot.ubl: u-boot-with-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
+ $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
+ -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
+spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
+u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
+ $(call if_changed,pad_cat)
+
+u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
+ $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
+u-boot.sb: u-boot.bin spl/u-boot-spl.bin
+ $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
+
+MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
+ -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
+spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+ifneq ($(CONFIG_ARCH_SOCFPGA),)
+quiet_cmd_gensplx4 = GENSPLX4 $@
+cmd_gensplx4 = $(OBJCOPY) -I binary -O binary --gap-fill=0x0 \
+ --pad-to=$(CONFIG_SPL_PAD_TO) \
+ spl/u-boot-spl.sfp spl/u-boot-spl.sfp && \
+ cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
+ spl/u-boot-spl.sfp spl/u-boot-spl.sfp > $@ || { rm -f $@; false; }
+spl/u-boot-splx4.sfp: spl/u-boot-spl.sfp FORCE
+ $(call if_changed,gensplx4)
+
+quiet_cmd_socboot = SOCBOOT $@
+cmd_socboot = cat spl/u-boot-splx4.sfp u-boot.img > $@ || { rm -f $@; false; }
+u-boot-with-spl.sfp: spl/u-boot-splx4.sfp u-boot.img FORCE
+ $(call if_changed,socboot)
+
+quiet_cmd_gensplpadx4 = GENSPLPADX4 $@
+cmd_gensplpadx4 = dd if=/dev/zero of=spl/u-boot-spl.pad bs=64 count=1024 ; \
+ cat spl/u-boot-spl.sfp spl/u-boot-spl.pad \
+ spl/u-boot-spl.sfp spl/u-boot-spl.pad \
+ spl/u-boot-spl.sfp spl/u-boot-spl.pad \
+ spl/u-boot-spl.sfp spl/u-boot-spl.pad > $@ || \
+ { rm -f $@ spl/u-boot-spl.pad; false; }
+u-boot-spl-padx4.sfp: spl/u-boot-spl.sfp FORCE
+ $(call if_changed,gensplpadx4)
+
+quiet_cmd_socnandboot = SOCNANDBOOT $@
+cmd_socnandboot = cat u-boot-spl-padx4.sfp u-boot.img > $@ || { rm -f $@; false; }
+u-boot-with-nand-spl.sfp: u-boot-spl-padx4.sfp u-boot.img FORCE
+ $(call if_changed,socnandboot)
+
+endif
+
+ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
+u-boot-with-dtb.bin: u-boot.bin u-boot.dtb \
+ $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE
+ $(call if_changed,binman)
+
+ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR),y)
+OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
+u-boot-br.bin: u-boot FORCE
+ $(call if_changed,objcopy)
+endif
+endif
+
+quiet_cmd_ldr = LD $@
+cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
+ $(filter-out FORCE,$^) -o $@
+
+ifdef CONFIG_X86
+OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16
+u-boot-x86-start16.bin: u-boot FORCE
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec
+u-boot-x86-reset16.bin: u-boot FORCE
+ $(call if_changed,objcopy)
+
+endif # CONFIG_X86
+
+OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
+u-boot-app.efi: u-boot FORCE
+ $(call if_changed,zobjcopy)
+
+u-boot.bin.o: u-boot.bin FORCE
+ $(call if_changed,efipayload)
+
+u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
+ $(call if_changed_dep,cpp_lds)
+
+# Rule to link the EFI payload which contains a stub and a U-Boot binary
+quiet_cmd_u-boot_payload ?= LD $@
+ cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
+ -T u-boot-payload.lds arch/x86/cpu/call32.o \
+ lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
+ $(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
+
+u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
+ $(call if_changed,u-boot_payload)
+
+OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
+u-boot-payload.efi: u-boot-payload FORCE
+ $(call if_changed,zobjcopy)
+
+u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
+ $(call if_changed,cat)
+
+#Add a target to create boot binary having SPL binary in PBI format
+#concatenated with u-boot binary. It is need by PowerPC SoC having
+#internal SRAM <= 512KB.
+MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
+ -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
+ -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
+
+spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+ifeq ($(ARCH),arm)
+UBOOT_BINLOAD := u-boot.img
+else
+ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
+UBOOT_BINLOAD := u-boot-with-dtb.bin
+else
+UBOOT_BINLOAD := u-boot.bin
+endif
+endif
+
+OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
+ --gap-fill=0xff
+
+u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
+ $(call if_changed,pad_cat)
+
+# PPC4xx needs the SPL at the end of the image, since the reset vector
+# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
+# and need to introduce a new build target with the full blown U-Boot
+# at the start padded up to the start of the SPL image. And then concat
+# the SPL image to the end.
+
+OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
+ --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
+u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
+ $(call if_changed,pad_cat)
+
+quiet_cmd_u-boot-elf ?= LD $@
+ cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
+ -T u-boot-elf.lds --defsym=$(CONFIG_PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \
+ -Ttext=$(CONFIG_SYS_TEXT_BASE)
+u-boot.elf: u-boot.bin u-boot-elf.lds
+ $(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
+ $(call if_changed,u-boot-elf)
+
+u-boot-elf.lds: arch/u-boot-elf.lds prepare FORCE
+ $(call if_changed_dep,cpp_lds)
+
+# MediaTek's ARM-based u-boot needs a header to contains its load address
+# which is parsed by the BootROM.
+# If the SPL build is enabled, the header will be added to the spl binary,
+# and the spl binary and the u-boot.img will be combined into one file.
+# Otherwise the header will be added to the u-boot.bin directly.
+
+ifeq ($(CONFIG_SPL),y)
+spl/u-boot-spl-mtk.bin: spl/u-boot-spl
+
+u-boot-mtk.bin: u-boot-with-spl.bin
+ $(call if_changed,copy)
+else
+MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
+ -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
+ -n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
+
+u-boot-mtk.bin: u-boot.bin FORCE
+ $(call if_changed,mkimage)
+endif
+
+quiet_cmd_endian_swap = SWAP $@
+ cmd_endian_swap = $(srctree)/tools/endian-swap.py $< $@
+
+u-boot-swap.bin: u-boot.bin FORCE
+ $(call if_changed,endian_swap)
+
+ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
+
+# Generate linker list symbols references to force compiler to not optimize
+# them away when compiling with LTO
+ifdef CONFIG_LTO
+u-boot-keep-syms-lto := keep-syms-lto.o
+u-boot-keep-syms-lto_c := $(patsubst %.o,%.c,$(u-boot-keep-syms-lto))
+
+quiet_cmd_keep_syms_lto = KSL $@
+ cmd_keep_syms_lto = \
+ $(srctree)/scripts/gen_ll_addressable_symbols.sh $(NM) $^ > $@
+
+quiet_cmd_keep_syms_lto_cc = KSLCC $@
+ cmd_keep_syms_lto_cc = \
+ $(CC) $(filter-out $(LTO_CFLAGS),$(c_flags)) -c -o $@ $<
+
+$(u-boot-keep-syms-lto_c): $(u-boot-main)
+ $(call if_changed,keep_syms_lto)
+$(u-boot-keep-syms-lto): $(u-boot-keep-syms-lto_c)
+ $(call if_changed,keep_syms_lto_cc)
+else
+u-boot-keep-syms-lto :=
+endif
+
+# Rule to link u-boot
+# May be overridden by arch/$(ARCH)/config.mk
+ifdef CONFIG_LTO
+quiet_cmd_u-boot__ ?= LTO $@
+ cmd_u-boot__ ?= \
+ $(CC) -nostdlib -nostartfiles \
+ $(LTO_FINAL_LDFLAGS) $(c_flags) \
+ $(KBUILD_LDFLAGS:%=-Wl,%) $(LDFLAGS_u-boot:%=-Wl,%) -o $@ \
+ -T u-boot.lds $(u-boot-init) \
+ -Wl,--whole-archive \
+ $(u-boot-main) \
+ $(u-boot-keep-syms-lto) \
+ $(PLATFORM_LIBS) \
+ -Wl,--no-whole-archive \
+ -Wl,-Map,u-boot.map; \
+ $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
+else
+quiet_cmd_u-boot__ ?= LD $@
+ cmd_u-boot__ ?= $(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
+ -T u-boot.lds $(u-boot-init) \
+ --whole-archive \
+ $(u-boot-main) \
+ --no-whole-archive \
+ $(PLATFORM_LIBS) -Map u-boot.map; \
+ $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
+endif
+
+quiet_cmd_smap = GEN common/system_map.o
+cmd_smap = \
+ smap=`$(call SYSTEM_MAP,u-boot) | \
+ awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
+ $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
+ -c $(srctree)/common/system_map.c -o common/system_map.o
+
+u-boot: $(u-boot-init) $(u-boot-main) $(u-boot-keep-syms-lto) u-boot.lds FORCE
+ +$(call if_changed,u-boot__)
+ifeq ($(CONFIG_KALLSYMS),y)
+ $(call cmd,smap)
+ $(call cmd,u-boot__) common/system_map.o
+endif
+
+ifeq ($(CONFIG_RISCV),y)
+ @tools/prelink-riscv $@ 0
+endif
+
+quiet_cmd_sym ?= SYM $@
+ cmd_sym ?= $(OBJDUMP) -t $< > $@
+u-boot.sym: u-boot FORCE
+ $(call if_changed,sym)
+
+# The actual objects are generated when descending,
+# make sure no implicit rule kicks in
+$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
+
+# Handle descending into subdirectories listed in $(u-boot-dirs)
+# Preset locale variables to speed up the build process. Limit locale
+# tweaks to this spot to avoid wrong language settings when running
+# make menuconfig etc.
+# Error messages still appears in the original language
+
+PHONY += $(u-boot-dirs)
+$(u-boot-dirs): prepare scripts
+ $(Q)$(MAKE) $(build)=$@
+
+tools: prepare
+# The "tools" are needed early
+$(filter-out tools, $(u-boot-dirs)): tools
+# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
+# is "yes"), so compile examples after U-Boot is compiled.
+examples: $(filter-out examples, $(u-boot-dirs))
+
+define filechk_uboot.release
+ echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
+endef
+
+# Store (new) UBOOTRELEASE string in include/config/uboot.release
+include/config/uboot.release: include/config/auto.conf FORCE
+ $(call filechk,uboot.release)
+
+
+# Things we need to do before we recursively start building the kernel
+# or the modules are listed in "prepare".
+# A multi level approach is used. prepareN is processed before prepareN-1.
+# archprepare is used in arch Makefiles and when processed asm symlink,
+# version.h and scripts_basic is processed / created.
+
+# Listed in dependency order
+PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
+
+# prepare3 is used to check if we are building in a separate output directory,
+# and if so do:
+# 1) Check that make has not been executed in the kernel src $(srctree)
+prepare3: include/config/uboot.release
+ifneq ($(KBUILD_SRC),)
+ @$(kecho) ' Using $(srctree) as source for U-Boot'
+ $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
+ echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
+ echo >&2 " in the '$(srctree)' directory.";\
+ /bin/false; \
+ fi;
+endif
+
+# prepare2 creates a makefile if using a separate output directory
+prepare2: prepare3 outputmakefile cfg
+
+prepare1: prepare2 $(version_h) $(timestamp_h) $(dt_h) \
+ include/config/auto.conf
+ifeq ($(wildcard $(LDSCRIPT)),)
+ @echo >&2 " Could not find linker script."
+ @/bin/false
+endif
+
+ifeq ($(CONFIG_USE_DEFAULT_ENV_FILE),y)
+prepare1: $(defaultenv_h)
+
+envtools: $(defaultenv_h)
+endif
+
+archprepare: prepare1 scripts_basic
+
+prepare0: archprepare FORCE
+ $(Q)$(MAKE) $(build)=.
+
+# All the preparing..
+prepare: prepare0
+
+# Generate some files
+# ---------------------------------------------------------------------------
+
+# Use sed to remove leading zeros from PATCHLEVEL to avoid using octal numbers
+define filechk_version.h
+ (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
+ echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
+ echo \#define U_BOOT_VERSION_NUM $(VERSION); \
+ echo \#define U_BOOT_VERSION_NUM_PATCH $$(echo $(PATCHLEVEL) | \
+ sed -e "s/^0*//"); \
+ echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
+ echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
+endef
+
+# The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
+# The BSD date on the other hand behaves different and would produce errors
+# with the misused '-d' switch. Respect that and search a working date with
+# well known pre- and suffixes for the GNU variant of date.
+define filechk_timestamp.h
+ (if test -n "$${SOURCE_DATE_EPOCH}"; then \
+ SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
+ DATE=""; \
+ for date in gdate date.gnu date; do \
+ $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
+ done; \
+ if test -n "$${DATE}"; then \
+ LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
+ LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
+ LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
+ LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
+ LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_EPOCH %s'; \
+ else \
+ return 42; \
+ fi; \
+ else \
+ LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
+ LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
+ LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
+ LC_ALL=C date +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
+ LC_ALL=C date +'#define U_BOOT_EPOCH %s'; \
+ fi)
+endef
+
+define filechk_defaultenv.h
+ ( { grep -v '^#' | grep -v '^$$' || true ; echo '' ; } | \
+ tr '\n' '\0' | \
+ sed -e 's/\\\x0\s*//g' | \
+ xxd -i ; )
+endef
+
+define filechk_dt.h
+ (if test -n "$${DEVICE_TREE}"; then \
+ echo \#define DEVICE_TREE \"$(DEVICE_TREE)\"; \
+ else \
+ echo \#define DEVICE_TREE CONFIG_DEFAULT_DEVICE_TREE; \
+ fi)
+endef
+
+$(version_h): include/config/uboot.release FORCE
+ $(call filechk,version.h)
+
+$(timestamp_h): $(srctree)/Makefile FORCE
+ $(call filechk,timestamp.h)
+
+$(dt_h): $(srctree)/Makefile FORCE
+ $(call filechk,dt.h)
+
+$(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
+ $(call filechk,defaultenv.h)
+
+# ---------------------------------------------------------------------------
+# Devicetree files
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
+dtstree := arch/$(SRCARCH)/boot/dts
+endif
+
+ifneq ($(dtstree),)
+
+%.dtb: prepare3 scripts_dtc
+ $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
+
+PHONY += dtbs dtbs_install
+dtbs: prepare3 scripts_dtc
+ $(Q)$(MAKE) $(build)=$(dtstree)
+
+dtbs_install:
+ $(Q)$(MAKE) $(dtbinst)=$(dtstree)
+
+ifdef CONFIG_OF_EARLY_FLATTREE
+all: dtbs
+endif
+
+endif
+
+PHONY += scripts_dtc
+scripts_dtc: scripts_basic
+ $(Q)$(MAKE) $(build)=scripts/dtc
+
+# ---------------------------------------------------------------------------
+quiet_cmd_cpp_lds = LDS $@
+cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
+ -D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
+
+u-boot.lds: $(LDSCRIPT) prepare FORCE
+ $(call if_changed_dep,cpp_lds)
+
+spl/u-boot-spl.bin: spl/u-boot-spl
+ @:
+ $(SPL_SIZE_CHECK)
+
+spl/u-boot-spl-dtb.bin: spl/u-boot-spl
+ @:
+
+spl/u-boot-spl-dtb.hex: spl/u-boot-spl
+ @:
+
+spl/u-boot-spl: tools prepare \
+ $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
+ $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)
+ $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
+
+spl/sunxi-spl.bin: spl/u-boot-spl
+ @:
+
+spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
+ @:
+
+spl/u-boot-spl.sfp: spl/u-boot-spl
+ @:
+
+spl/boot.bin: spl/u-boot-spl
+ @:
+
+tpl/u-boot-tpl.bin: tools prepare \
+ $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
+ $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
+ $(TPL_SIZE_CHECK)
+
+TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
+
+FIND := find
+FINDFLAGS := -L
+
+tags ctags:
+ ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
+ -name '*.[chS]' -print`
+ ln -s ctags tags
+
+etags:
+ etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
+ -name '*.[chS]' -print`
+cscope:
+ $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
+ cscope.files
+ @find $(TAG_SUBDIRS) -name '*.[chS]' -type l -print | \
+ grep -xvf - cscope.files > cscope.files.no-symlinks; \
+ mv cscope.files.no-symlinks cscope.files
+ cscope -b -q -k
+
+SYSTEM_MAP = \
+ $(NM) $1 | \
+ grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
+ LC_ALL=C sort
+System.map: u-boot
+ @$(call SYSTEM_MAP,$<) > $@
+
+#########################################################################
+
+# ARM relocations should all be R_ARM_RELATIVE (32-bit) or
+# R_AARCH64_RELATIVE (64-bit).
+checkarmreloc: u-boot
+ @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
+ grep R_A | sort -u`"; \
+ if test "$$RELOC" != "R_ARM_RELATIVE" -a \
+ "$$RELOC" != "R_AARCH64_RELATIVE"; then \
+ echo "$< contains unexpected relocations: $$RELOC"; \
+ false; \
+ fi
+
+tools/version.h: include/version.h
+ $(Q)mkdir -p $(dir $@)
+ $(call if_changed,copy)
+
+envtools: scripts_basic $(version_h) $(timestamp_h) tools/version.h
+ $(Q)$(MAKE) $(build)=tools/env
+
+tools-only: export TOOLS_ONLY=y
+tools-only: scripts_basic $(version_h) $(timestamp_h) tools/version.h
+ $(Q)$(MAKE) $(build)=tools
+
+tools-all: export HOST_TOOLS_ALL=y
+tools-all: envtools tools ;
+
+cross_tools: export CROSS_BUILD_TOOLS=y
+cross_tools: tools ;
+
+.PHONY : CHANGELOG
+CHANGELOG:
+ git log --no-merges U-Boot-1_1_5.. | \
+ unexpand -a | sed -e 's/\s\s*$$//' > $@
+
+#########################################################################
+
+###
+# Cleaning is done on three levels.
+# make clean Delete most generated files
+# Leave enough to build external modules
+# make mrproper Delete the current configuration, and all generated files
+# make distclean Remove editor backup files, patch leftover files and the like
+
+# Directories & files removed with 'make clean'
+CLEAN_DIRS += $(MODVERDIR) \
+ $(foreach d, spl tpl, $(patsubst %,$d/%, \
+ $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
+
+CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h tools/version.h \
+ boot* u-boot* MLO* SPL System.map fit-dtb.blob* \
+ u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log \
+ lpc32xx-* bl31.c bl31.elf bl31_*.bin image.map tispl.bin* \
+ idbloader.img flash.bin flash.log defconfig keep-syms-lto.c
+
+# Directories & files removed with 'make mrproper'
+MRPROPER_DIRS += include/config include/generated spl tpl \
+ .tmp_objdiff doc/output include/asm
+
+# Remove include/asm symlink created by U-Boot before v2014.01
+MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
+ ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
+ drivers/video/fonts/*.S include/asm
+
+# clean - Delete most, but leave enough to build external modules
+#
+clean: rm-dirs := $(CLEAN_DIRS)
+clean: rm-files := $(CLEAN_FILES)
+
+clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
+
+clean-dirs := $(addprefix _clean_, $(clean-dirs))
+
+PHONY += $(clean-dirs) clean archclean
+$(clean-dirs):
+ $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
+
+clean: $(clean-dirs)
+ $(call cmd,rmdirs)
+ $(call cmd,rmfiles)
+ @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
+ \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+ -o -name '*.ko.*' -o -name '*.su' -o -name '*.pyc' \
+ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
+ -o -name '*.lex.c' -o -name '*.tab.[ch]' \
+ -o -name '*.asn1.[ch]' \
+ -o -name '*.symtypes' -o -name 'modules.order' \
+ -o -name modules.builtin -o -name '.tmp_*.o.*' \
+ -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
+ -o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
+ -type f -print | xargs rm -f
+
+# mrproper - Delete all generated files, including .config
+#
+mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
+mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
+mrproper-dirs := $(addprefix _mrproper_,scripts)
+
+PHONY += $(mrproper-dirs) mrproper archmrproper
+$(mrproper-dirs):
+ $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
+
+mrproper: clean $(mrproper-dirs)
+ $(call cmd,rmdirs)
+ $(call cmd,rmfiles)
+ @rm -f arch/*/include/asm/arch
+
+# distclean
+#
+PHONY += distclean
+
+distclean: mrproper
+ @find $(srctree) $(RCS_FIND_IGNORE) \
+ \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
+ -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
+ -o -name '.*.rej' -o -name '*%' -o -name 'core' \
+ -o -name '*.pyc' \) \
+ -type f -print | xargs rm -f
+ @rm -f boards.cfg CHANGELOG
+
+backup:
+ F=`basename $(srctree)` ; cd .. ; \
+ gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
+
+help:
+ @echo 'Cleaning targets:'
+ @echo ' clean - Remove most generated files but keep the config'
+ @echo ' mrproper - Remove all generated files + config + various backup files'
+ @echo ' distclean - mrproper + remove editor backup and patch files'
+ @echo ''
+ @echo 'Configuration targets:'
+ @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
+ @echo ''
+ @echo 'Test targets:'
+ @echo ''
+ @echo ' check - Run all automated tests that use sandbox'
+ @echo ' qcheck - Run quick automated tests that use sandbox'
+ @echo ' tcheck - Run quick automated tests on tools'
+ @echo ''
+ @echo 'Other generic targets:'
+ @echo ' all - Build all necessary images depending on configuration'
+ @echo ' tests - Build U-Boot for sandbox and run tests'
+ @echo '* u-boot - Build the bare u-boot'
+ @echo ' dir/ - Build all files in dir and below'
+ @echo ' dir/file.[oisS] - Build specified target only'
+ @echo ' dir/file.lst - Build specified mixed source/assembly target only'
+ @echo ' (requires a recent binutils and recent build (System.map))'
+ @echo ' tags/ctags - Generate ctags file for editors'
+ @echo ' etags - Generate etags file for editors'
+ @echo ' cscope - Generate cscope index'
+ @echo ' ubootrelease - Output the release version string (use with make -s)'
+ @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
+ @echo " cfg - Don't build, just create the .cfg files"
+ @echo " envtools - Build only the target-side environment tools"
+ @echo ''
+ @echo 'Static analysers'
+ @echo ' checkstack - Generate a list of stack hogs'
+ @echo ' coccicheck - Execute static code analysis with Coccinelle'
+ @echo ''
+ @echo 'Documentation targets:'
+ @$(MAKE) -f $(srctree)/doc/Makefile dochelp
+ @echo ''
+ @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
+ @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
+ @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
+ @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
+ @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
+ @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
+ @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
+ @echo ' 1: warnings which may be relevant and do not occur too often'
+ @echo ' 2: warnings which occur quite often but may still be relevant'
+ @echo ' 3: more obscure warnings, can most likely be ignored'
+ @echo ' Multiple levels can be combined with W=12 or W=123'
+ @echo ''
+ @echo 'Execute "make" or "make all" to build all targets marked with [*] '
+ @echo 'For further info see the ./README file'
+
+tests check:
+ $(srctree)/test/run
+
+qcheck:
+ $(srctree)/test/run quick
+
+tcheck:
+ $(srctree)/test/run tools
+
+# Documentation targets
+# ---------------------------------------------------------------------------
+DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
+ linkcheckdocs dochelp refcheckdocs
+PHONY += $(DOC_TARGETS)
+$(DOC_TARGETS): scripts_basic FORCE
+ $(Q)$(MAKE) $(build)=doc $@
+
+PHONY += checkstack ubootrelease ubootversion
+
+checkstack:
+ $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
+ $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
+
+ubootrelease:
+ @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
+
+ubootversion:
+ @echo $(UBOOTVERSION)
+
+# Single targets
+# ---------------------------------------------------------------------------
+# Single targets are compatible with:
+# - build with mixed source and output
+# - build with separate output dir 'make O=...'
+# - external modules
+#
+# target-dir => where to store outputfile
+# build-dir => directory in kernel source tree to use
+
+ifeq ($(KBUILD_EXTMOD),)
+ build-dir = $(patsubst %/,%,$(dir $@))
+ target-dir = $(dir $@)
+else
+ zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
+ build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
+ target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
+endif
+
+%.s: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.i: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.lst: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.s: %.S prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.S prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.symtypes: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+
+# Modules
+/: prepare scripts FORCE
+ $(cmd_crmodverdir)
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir)
+%/: prepare scripts FORCE
+ $(cmd_crmodverdir)
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir)
+%.ko: prepare scripts FORCE
+ $(cmd_crmodverdir)
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir) $(@:.ko=.o)
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
+quiet_cmd_genenv = GENENV $@
+cmd_genenv = $(OBJCOPY) --dump-section .rodata.default_environment=$@ env/common.o; \
+ sed --in-place -e 's/\x00/\x0A/g' $@
+
+u-boot-initial-env: u-boot.bin
+ $(call if_changed,genenv)
+
+# Consistency checks
+# ---------------------------------------------------------------------------
+
+PHONY += coccicheck
+
+coccicheck:
+ $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
+
+# FIXME Should go into a make.lib or something
+# ===========================================================================
+
+quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
+ cmd_rmdirs = rm -rf $(rm-dirs)
+
+quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
+ cmd_rmfiles = rm -f $(rm-files)
+
+# read all saved command lines
+
+cmd_files := $(wildcard .*.cmd)
+
+ifneq ($(cmd_files),)
+ $(cmd_files): ; # Do not try to update included dependency files
+ include $(cmd_files)
+endif
+
+endif #ifeq ($(config-targets),1)
+endif #ifeq ($(mixed-targets),1)
+endif # skip-makefile
+
+PHONY += FORCE
+FORCE:
+
+# Declare the contents of the PHONY variable as phony. We keep that
+# information in a variable so we can use it in if_changed and friends.
+.PHONY: $(PHONY)
Index: StarFive/u-boot/create-2021.10-3.8.2-rwx-permissions-patch/u-boot-2021.10-3.8.2-new/scripts/Makefile.lib
===================================================================
--- StarFive/u-boot/create-2021.10-3.8.2-rwx-permissions-patch/u-boot-2021.10-3.8.2-new/scripts/Makefile.lib (nonexistent)
+++ StarFive/u-boot/create-2021.10-3.8.2-rwx-permissions-patch/u-boot-2021.10-3.8.2-new/scripts/Makefile.lib (revision 385)
@@ -0,0 +1,608 @@
+# SPDX-License-Identifier: GPL-2.0
+# Backward compatibility
+asflags-y += $(EXTRA_AFLAGS)
+ccflags-y += $(EXTRA_CFLAGS)
+cppflags-y += $(EXTRA_CPPFLAGS)
+ldflags-y += $(EXTRA_LDFLAGS)
+
+#
+# flags that take effect in sub directories
+export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y)
+export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y)
+
+# Figure out what we need to build from the various variables
+# ===========================================================================
+
+# When an object is listed to be built compiled-in and modular,
+# only build the compiled-in version
+
+obj-m := $(filter-out $(obj-y),$(obj-m))
+
+# Libraries are always collected in one lib file.
+# Filter out objects already built-in
+
+lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))
+
+
+# Handle objects in subdirs
+# ---------------------------------------------------------------------------
+# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o
+# and add the directory to the list of dirs to descend into: $(subdir-y)
+# o if we encounter foo/ in $(obj-m), remove it from $(obj-m)
+# and add the directory to the list of dirs to descend into: $(subdir-m)
+
+# Determine modorder.
+# Unfortunately, we don't have information about ordering between -y
+# and -m subdirs. Just put -y's first.
+modorder := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko))
+
+__subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y)))
+subdir-y += $(__subdir-y)
+__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m)))
+subdir-m += $(__subdir-m)
+obj-y := $(patsubst %/, %/built-in.o, $(obj-y))
+obj-m := $(filter-out %/, $(obj-m))
+
+# Subdirectories we need to descend into
+
+subdir-ym := $(sort $(subdir-y) $(subdir-m))
+
+# if $(foo-objs) exists, foo.o is a composite object
+multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
+multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
+multi-used := $(multi-used-y) $(multi-used-m)
+single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))
+
+# Build list of the parts of our composite objects, our composite
+# objects depend on those (obviously)
+multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y)))
+multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y)))
+
+# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
+# tell kbuild to descend
+subdir-obj-y := $(filter %/built-in.o, $(obj-y))
+
+# Replace multi-part objects by their individual parts, look at local dir only
+real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
+real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
+
+# Add subdir path
+
+extra-y := $(addprefix $(obj)/,$(extra-y))
+always := $(addprefix $(obj)/,$(always))
+targets := $(addprefix $(obj)/,$(targets))
+modorder := $(addprefix $(obj)/,$(modorder))
+obj-y := $(addprefix $(obj)/,$(obj-y))
+obj-m := $(addprefix $(obj)/,$(obj-m))
+lib-y := $(addprefix $(obj)/,$(lib-y))
+subdir-obj-y := $(addprefix $(obj)/,$(subdir-obj-y))
+real-objs-y := $(addprefix $(obj)/,$(real-objs-y))
+real-objs-m := $(addprefix $(obj)/,$(real-objs-m))
+single-used-m := $(addprefix $(obj)/,$(single-used-m))
+multi-used-y := $(addprefix $(obj)/,$(multi-used-y))
+multi-used-m := $(addprefix $(obj)/,$(multi-used-m))
+multi-objs-y := $(addprefix $(obj)/,$(multi-objs-y))
+multi-objs-m := $(addprefix $(obj)/,$(multi-objs-m))
+subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
+
+# These flags are needed for modversions and compiling, so we define them here
+# already
+# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will
+# end up in (or would, if it gets compiled in)
+# Note: Files that end up in two or more modules are compiled without the
+# KBUILD_MODNAME definition. The reason is that any made-up name would
+# differ in different configs.
+name-fix = $(squote)$(quote)$(subst $(comma),_,$(subst -,_,$1))$(quote)$(squote)
+basename_flags = -DKBUILD_BASENAME=$(call name-fix,$(basetarget))
+modname_flags = $(if $(filter 1,$(words $(modname))),\
+ -DKBUILD_MODNAME=$(call name-fix,$(modname)))
+
+orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
+ $(ccflags-y) $(CFLAGS_$(basetarget).o)
+_c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
+orig_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \
+ $(asflags-y) $(AFLAGS_$(basetarget).o)
+_a_flags = $(filter-out $(AFLAGS_REMOVE_$(basetarget).o), $(orig_a_flags))
+_cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
+
+#
+# Enable gcov profiling flags for a file, directory or for all files depending
+# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
+# (in this order)
+#
+ifeq ($(CONFIG_GCOV_KERNEL),y)
+_c_flags += $(if $(patsubst n%,, \
+ $(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
+ $(CFLAGS_GCOV))
+endif
+
+#
+# Enable address sanitizer flags for kernel except some files or directories
+# we don't want to check (depends on variables KASAN_SANITIZE_obj.o, KASAN_SANITIZE)
+#
+ifeq ($(CONFIG_KASAN),y)
+_c_flags += $(if $(patsubst n%,, \
+ $(KASAN_SANITIZE_$(basetarget).o)$(KASAN_SANITIZE)y), \
+ $(CFLAGS_KASAN))
+endif
+
+# If building the kernel in a separate objtree expand all occurrences
+# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').
+
+ifeq ($(KBUILD_SRC),)
+__c_flags = $(_c_flags)
+__a_flags = $(_a_flags)
+__cpp_flags = $(_cpp_flags)
+else
+
+# -I$(obj) locates generated .h files
+# $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files
+# and locates generated .h files
+# FIXME: Replace both with specific CFLAGS* statements in the makefiles
+__c_flags = $(if $(obj),$(call addtree,-I$(src)) -I$(obj)) \
+ $(call flags,_c_flags)
+__a_flags = $(call flags,_a_flags)
+__cpp_flags = $(call flags,_cpp_flags)
+endif
+
+# Modified for U-Boot: LINUXINCLUDE -> UBOOTINCLUDE
+c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \
+ $(__c_flags) $(modkern_cflags) \
+ $(basename_flags) $(modname_flags)
+
+a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \
+ $(__a_flags) $(modkern_aflags)
+
+cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \
+ $(__cpp_flags)
+
+ld_flags = $(KBUILD_LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F))
+
+# Try these files in order to find the U-Boot-specific .dtsi include file
+u_boot_dtsi_options = $(strip $(wildcard $(dir $<)$(basename $(notdir $<))-u-boot.dtsi) \
+ $(wildcard $(dir $<)$(subst $\",,$(CONFIG_SYS_SOC))-u-boot.dtsi) \
+ $(wildcard $(dir $<)$(subst $\",,$(CONFIG_SYS_CPU))-u-boot.dtsi) \
+ $(wildcard $(dir $<)$(subst $\",,$(CONFIG_SYS_VENDOR))-u-boot.dtsi) \
+ $(wildcard $(dir $<)u-boot.dtsi))
+
+u_boot_dtsi_options_raw = $(warning Automatic .dtsi inclusion: options: \
+ $(dir $<)$(basename $(notdir $<))-u-boot.dtsi \
+ $(dir $<)$(subst $\",,$(CONFIG_SYS_SOC))-u-boot.dtsi \
+ $(dir $<)$(subst $\",,$(CONFIG_SYS_CPU))-u-boot.dtsi \
+ $(dir $<)$(subst $\",,$(CONFIG_SYS_VENDOR))-u-boot.dtsi \
+ $(dir $<)u-boot.dtsi ... \
+ found: $(if $(u_boot_dtsi_options),"$(u_boot_dtsi_options)",nothing!))
+
+# Uncomment for debugging
+# This shows all the files that were considered and the one that we chose.
+# u_boot_dtsi_options_debug = $(u_boot_dtsi_options_raw)
+
+# We use the first match
+u_boot_dtsi = $(strip $(u_boot_dtsi_options_debug) \
+ $(notdir $(firstword $(u_boot_dtsi_options))))
+
+# Modified for U-Boot
+dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \
+ -I$(srctree)/arch/$(ARCH)/dts \
+ -I$(srctree)/arch/$(ARCH)/dts/include \
+ -Iinclude \
+ -I$(srctree)/include \
+ -I$(srctree)/arch/$(ARCH)/include \
+ -include $(srctree)/include/linux/kconfig.h \
+ -D__ASSEMBLY__ \
+ -undef -D__DTS__
+
+# Finds the multi-part object the current object will be linked into
+modname-multi = $(sort $(foreach m,$(multi-used),\
+ $(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=))))
+
+# Useful for describing the dependency of composite objects
+# Usage:
+# $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add)
+define multi_depend
+$(foreach m, $(notdir $1), \
+ $(eval $(obj)/$m: \
+ $(addprefix $(obj)/, $(foreach s, $3, $($(m:%$(strip $2)=%$(s)))))))
+endef
+
+# LEX
+# ---------------------------------------------------------------------------
+quiet_cmd_flex = LEX $@
+ cmd_flex = $(LEX) -o$@ -L $<
+
+$(obj)/%.lex.c: $(src)/%.l FORCE
+ $(call if_changed,flex)
+
+# YACC
+# ---------------------------------------------------------------------------
+quiet_cmd_bison = YACC $@
+ cmd_bison = $(YACC) -o$@ -t -l $<
+
+$(obj)/%.tab.c: $(src)/%.y FORCE
+ $(call if_changed,bison)
+
+quiet_cmd_bison_h = YACC $@
+ cmd_bison_h = $(YACC) -o/dev/null --defines=$@ -t -l $<
+
+$(obj)/%.tab.h: $(src)/%.y FORCE
+ $(call if_changed,bison_h)
+
+# Shipped files
+# ===========================================================================
+
+quiet_cmd_shipped = SHIPPED $@
+cmd_shipped = cat $< > $@
+
+$(obj)/%: $(src)/%_shipped
+ $(call cmd,shipped)
+
+# Commands useful for building a boot image
+# ===========================================================================
+#
+# Use as following:
+#
+# target: source(s) FORCE
+# $(if_changed,ld/objcopy/gzip)
+#
+# and add target to extra-y so that we know we have to
+# read in the saved command line
+
+# Linking
+# ---------------------------------------------------------------------------
+
+quiet_cmd_ld = LD $@
+cmd_ld = $(LD) $(ld_flags) $(filter-out FORCE,$^) -o $@
+
+# Objcopy
+# ---------------------------------------------------------------------------
+
+quiet_cmd_objcopy = OBJCOPY $@
+cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
+
+# Gzip
+# ---------------------------------------------------------------------------
+
+quiet_cmd_gzip = GZIP $@
+cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@) || \
+ (rm -f $@ ; false)
+
+# DTC
+# ---------------------------------------------------------------------------
+
+# Disable noisy checks by default
+ifeq ($(findstring 1,$(KBUILD_ENABLE_EXTRA_GCC_CHECKS)),)
+DTC_FLAGS += -Wno-unit_address_vs_reg \
+ -Wno-unit_address_format \
+ -Wno-avoid_unnecessary_addr_size \
+ -Wno-alias_paths \
+ -Wno-graph_child_address \
+ -Wno-graph_port \
+ -Wno-unique_unit_address \
+ -Wno-simple_bus_reg \
+ -Wno-pci_device_reg
+
+# U-Boot specific disables
+DTC_FLAGS += -Wno-pci_bridge \
+ -Wno-pci_device_bus_num
+endif
+
+ifneq ($(findstring 2,$(KBUILD_ENABLE_EXTRA_GCC_CHECKS)),)
+DTC_FLAGS += -Wnode_name_chars_strict \
+ -Wproperty_name_chars_strict
+endif
+
+DTC_FLAGS += $(DTC_FLAGS_$(basetarget))
+
+# Generate an assembly file to wrap the output of the device tree compiler
+quiet_cmd_dt_S_dtb= DTB $@
+# Modified for U-Boot
+cmd_dt_S_dtb= \
+( \
+ echo '.section .dtb.init.rodata,"a"'; \
+ echo '.balign 16'; \
+ echo '.global __dtb_$(subst -,_,$(*F))_begin'; \
+ echo '__dtb_$(subst -,_,$(*F))_begin:'; \
+ echo '.incbin "$<" '; \
+ echo '__dtb_$(subst -,_,$(*F))_end:'; \
+ echo '.global __dtb_$(subst -,_,$(*F))_end'; \
+ echo '.balign 16'; \
+) > $@
+
+$(obj)/%.dtb.S: $(obj)/%.dtb
+ $(call cmd,dt_S_dtb)
+
+ifeq ($(CONFIG_OF_LIBFDT_OVERLAY),y)
+DTC_FLAGS += -@
+endif
+
+quiet_cmd_dtc = DTC $@
+# Modified for U-Boot
+# Bring in any U-Boot-specific include at the end of the file
+cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
+ (cat $<; $(if $(u_boot_dtsi),echo '$(pound)include "$(u_boot_dtsi)"')) > $(pre-tmp); \
+ $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $(pre-tmp) ; \
+ $(DTC) -O dtb -o $@ -b 0 \
+ -i $(dir $<) $(DTC_FLAGS) \
+ -d $(depfile).dtc.tmp $(dtc-tmp) || \
+ (echo "Check $(shell pwd)/$(pre-tmp) for errors" && false) \
+ ; \
+ sed "s:$(pre-tmp):$(<):" $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
+
+$(obj)/%.dtb: $(src)/%.dts FORCE
+ $(call if_changed_dep,dtc)
+
+pre-tmp = $(subst $(comma),_,$(dot-target).pre.tmp)
+dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
+
+# DTCO
+# ---------------------------------------------------------------------------
+
+quiet_cmd_dtco = DTCO $@
+# Rule for objects only; does not put specific u-boot include at the end
+# No generation of assembly file either
+# Modified for U-Boot
+cmd_dtco = mkdir -p $(dir ${dtc-tmp}) ; \
+ $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
+ $(DTC) -@ -O dtb -o $@ -b 0 \
+ -i $(dir $<) $(DTC_FLAGS) \
+ -d $(depfile).dtc.tmp $(dtc-tmp) ; \
+ cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
+
+$(obj)/%.dtbo: $(src)/%.dts FORCE
+ $(call if_changed_dep,dtco)
+
+# Fonts
+# ---------------------------------------------------------------------------
+
+# Generate an assembly file to wrap the font data
+quiet_cmd_S_ttf= TTF $@
+# Modified for U-Boot
+cmd_S_ttf= \
+( \
+ echo '.section .rodata.ttf.init,"a"'; \
+ echo '.balign 16'; \
+ echo '.global __ttf_$(*F)_begin'; \
+ echo '__ttf_$(*F)_begin:'; \
+ echo '.incbin "$<" '; \
+ echo '__ttf_$(*F)_end:'; \
+ echo '.global __ttf_$(*F)_end'; \
+ echo '.balign 16'; \
+) > $@
+
+$(obj)/%.S: $(src)/%.ttf
+ $(call cmd,S_ttf)
+
+# EFI applications
+# A Makefile target *.efi is built as EFI application.
+# A Makefile target *_efi.S wraps *.efi as built-in EFI application.
+# ---------------------------------------------------------------------------
+
+# Generate an assembly file to wrap the EFI app
+cmd_S_efi= \
+( \
+ echo '.section .rodata.$*.init,"a"'; \
+ echo '.balign 16'; \
+ echo '.global __efi_$*_begin'; \
+ echo '__efi_$*_begin:'; \
+ echo '.incbin "$<" '; \
+ echo '__efi_$*_end:'; \
+ echo '.global __efi_$*_end'; \
+ echo '.balign 16'; \
+) > $@
+
+$(obj)/%_efi.S: $(obj)/%.efi
+ $(call cmd,S_efi)
+
+quiet_cmd_efi_objcopy = OBJCOPY $@
+cmd_efi_objcopy = $(OBJCOPY) -j .header -j .text -j .sdata -j .data -j \
+ .dynamic -j .dynsym -j .rel* -j .rela* -j .reloc \
+ $(if $(EFI_TARGET),$(EFI_TARGET),-O binary) $^ $@
+
+$(obj)/%.efi: $(obj)/%_efi.so
+ $(call cmd,efi_objcopy)
+
+KBUILD_EFILDFLAGS = -nostdlib -znocombreloc
+KBUILD_EFILDFLAGS += $(call ld-option,--no-warn-rwx-segments)
+quiet_cmd_efi_ld = LD $@
+cmd_efi_ld = $(LD) $(KBUILD_EFILDFLAGS) -T $(EFI_LDS_PATH) -shared \
+ -Bsymbolic -s $^ -o $@
+
+EFI_LDS_PATH = $(srctree)/arch/$(ARCH)/lib/$(EFI_LDS)
+
+$(obj)/efi_crt0.o: $(srctree)/arch/$(ARCH)/lib/$(EFI_CRT0:.o=.S) FORCE
+ $(call if_changed_dep,as_o_S)
+
+$(obj)/efi_reloc.o: $(srctree)/arch/$(ARCH)/lib/$(EFI_RELOC:.o=.c) $(recordmcount_source) FORCE
+ $(call cmd,force_checksrc)
+ $(call if_changed_rule,cc_o_c)
+
+$(obj)/%_efi.so: $(obj)/%.o $(obj)/efi_crt0.o $(obj)/efi_reloc.o $(obj)/efi_freestanding.o
+ $(call cmd,efi_ld)
+
+targets += $(obj)/efi_crt0.o $(obj)/efi_reloc.o $(obj)/efi_freestanding.o
+
+CFLAGS_REMOVE_efi_reloc.o := $(LTO_CFLAGS)
+CFLAGS_REMOVE_efi_freestanding.o := $(LTO_CFLAGS)
+
+# ACPI
+# ---------------------------------------------------------------------------
+#
+# This first sends the file (typically dsdt.asl) through the preprocessor
+# resolve includes and any CONFIG options used. This produces dsdt.asl.tmp
+# which is pure ASL code. The Intel ASL (ACPI (Advanced Configuration and Power
+# Interface) Source Language compiler (iasl) then converts this ASL code into a
+# C file containing the hex data to build into U-Boot. This file is called
+# dsdt.hex (despite us setting the prefix to .../dsdt.asl.tmp) so must be
+# renamed to dsdt.c for consumption by the build system.
+ASL_TMP = $(patsubst %.c,%.asl.tmp,$@)
+
+quiet_cmd_acpi_c_asl= ASL $<
+cmd_acpi_c_asl= \
+ $(CPP) -x assembler-with-cpp -D__ASSEMBLY__ -D__ACPI__ \
+ -P $(UBOOTINCLUDE) -o $(ASL_TMP) $< && \
+ iasl -p $@ -tc $(ASL_TMP) $(if $(KBUILD_VERBOSE:1=), >/dev/null) && \
+ mv $(patsubst %.c,%.hex,$@) $@
+
+$(obj)/dsdt.c: $(src)/dsdt.asl
+ $(call cmd,acpi_c_asl)
+ $(Q)sed -i -e "s,dsdt_aml_code,AmlCode," $@
+
+# Bzip2
+# ---------------------------------------------------------------------------
+
+# Bzip2 and LZMA do not include size in file... so we have to fake that;
+# append the size as a 32-bit littleendian number as gzip does.
+size_append = printf $(shell \
+dec_size=0; \
+for F in $1; do \
+ fsize=$$(stat -c "%s" $$F); \
+ dec_size=$$(expr $$dec_size + $$fsize); \
+done; \
+printf "%08x\n" $$dec_size | \
+ sed 's/\(..\)/\1 /g' | { \
+ read ch0 ch1 ch2 ch3; \
+ for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \
+ printf '%s%03o' '\\' $$((0x$$ch)); \
+ done; \
+ } \
+)
+
+quiet_cmd_bzip2 = BZIP2 $@
+cmd_bzip2 = (cat $(filter-out FORCE,$^) | \
+ bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
+
+# Lzma
+# ---------------------------------------------------------------------------
+
+quiet_cmd_lzma = LZMA $@
+cmd_lzma = (cat $(filter-out FORCE,$^) | \
+ lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
+
+quiet_cmd_lzo = LZO $@
+cmd_lzo = (cat $(filter-out FORCE,$^) | \
+ lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
+
+quiet_cmd_lz4 = LZ4 $@
+cmd_lz4 = (cat $(filter-out FORCE,$^) | \
+ lz4c -l -c1 stdin stdout && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
+
+# U-Boot mkimage
+# ---------------------------------------------------------------------------
+
+MKIMAGE := $(srctree)/scripts/mkuboot.sh
+
+# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces
+# the number of overrides in arch makefiles
+UIMAGE_ARCH ?= $(SRCARCH)
+UIMAGE_COMPRESSION ?= $(if $(2),$(2),none)
+UIMAGE_OPTS-y ?=
+UIMAGE_TYPE ?= kernel
+UIMAGE_LOADADDR ?= arch_must_set_this
+UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR)
+UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)'
+UIMAGE_IN ?= $<
+UIMAGE_OUT ?= $@
+
+quiet_cmd_uimage = UIMAGE $(UIMAGE_OUT)
+ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \
+ -C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \
+ -T $(UIMAGE_TYPE) \
+ -a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \
+ -n $(UIMAGE_NAME) -d $(UIMAGE_IN) $(UIMAGE_OUT)
+
+# XZ
+# ---------------------------------------------------------------------------
+# Use xzkern to compress the kernel image and xzmisc to compress other things.
+#
+# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage
+# of the kernel decompressor. A BCJ filter is used if it is available for
+# the target architecture. xzkern also appends uncompressed size of the data
+# using size_append. The .xz format has the size information available at
+# the end of the file too, but it's in more complex format and it's good to
+# avoid changing the part of the boot code that reads the uncompressed size.
+# Note that the bytes added by size_append will make the xz tool think that
+# the file is corrupt. This is expected.
+#
+# xzmisc doesn't use size_append, so it can be used to create normal .xz
+# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very
+# big dictionary would increase the memory usage too much in the multi-call
+# decompression mode. A BCJ filter isn't used either.
+quiet_cmd_xzkern = XZKERN $@
+cmd_xzkern = (cat $(filter-out FORCE,$^) | \
+ sh $(srctree)/scripts/xz_wrap.sh && \
+ $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
+
+quiet_cmd_xzmisc = XZMISC $@
+cmd_xzmisc = (cat $(filter-out FORCE,$^) | \
+ xz --check=crc32 --lzma2=dict=1MiB) > $@ || \
+ (rm -f $@ ; false)
+
+# Additional commands for U-Boot
+#
+# mkimage
+# ---------------------------------------------------------------------------
+MKIMAGEOUTPUT ?= /dev/null
+quiet_cmd_mkimage = MKIMAGE $@
+cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
+ >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
+
+# fdtgrep
+# ---------------------------------------------------------------------------
+# Pass the original device tree file through fdtgrep twice. The first pass
+# removes any unwanted nodes (i.e. those which don't have the
+# 'u-boot,dm-pre-reloc' property and thus are not needed by SPL. The second
+# pass removes various unused properties from the remaining nodes.
+# The output is typically a much smaller device tree file.
+ifeq ($(CONFIG_TPL_BUILD),y)
+fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-tpl
+else
+fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-spl
+endif
+quiet_cmd_fdtgrep = FDTGREP $@
+ cmd_fdtgrep = $(objtree)/tools/fdtgrep $(fdtgrep_props) -RT $< \
+ -n /chosen -n /config -O dtb | \
+ $(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
+ -P u-boot,dm-pre-reloc -P u-boot,dm-spl -P u-boot,dm-tpl \
+ $(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS)))
+
+# fdt_rm_props
+# ---------------------------------------------------------------------------
+# Pass the original device tree file through fdtgrep. This removes various
+# unused properties. The output is typically a smaller device tree file.
+quiet_cmd_fdt_rm_props = FDTGREP $@
+ cmd_fdt_rm_props = cat $< | $(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
+ $(addprefix -P ,$(subst $\",,$(CONFIG_OF_REMOVE_PROPS)))
+
+# ASM offsets
+# ---------------------------------------------------------------------------
+
+# Default sed regexp - multiline due to syntax constraints
+define sed-offsets
+ "s:[[:space:]]*\.ascii[[:space:]]*\"\(.*\)\":\1:; \
+ /^->/{s:->#\(.*\):/* \1 */:; \
+ s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \
+ s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
+ s:->::; p;}"
+endef
+
+# Use filechk to avoid rebuilds when a header changes, but the resulting file
+# does not
+define filechk_offsets
+ (set -e; \
+ echo "#ifndef $2"; \
+ echo "#define $2"; \
+ echo "/*"; \
+ echo " * DO NOT MODIFY."; \
+ echo " *"; \
+ echo " * This file was generated by Kbuild"; \
+ echo " */"; \
+ echo ""; \
+ sed -ne $(sed-offsets); \
+ echo ""; \
+ echo "#endif" )
+endef
Index: StarFive/u-boot/create-2021.10-3.8.2-rwx-permissions-patch/u-boot-2021.10-3.8.2-new/scripts/Makefile.spl
===================================================================
--- StarFive/u-boot/create-2021.10-3.8.2-rwx-permissions-patch/u-boot-2021.10-3.8.2-new/scripts/Makefile.spl (nonexistent)
+++ StarFive/u-boot/create-2021.10-3.8.2-rwx-permissions-patch/u-boot-2021.10-3.8.2-new/scripts/Makefile.spl (revision 385)
@@ -0,0 +1,585 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2011
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2011
+# Daniel Schwierzeck, daniel.schwierzeck@googlemail.com.
+#
+# (C) Copyright 2011
+# Texas Instruments Incorporated - http://www.ti.com/
+# Aneesh V <aneesh@ti.com>
+# Based on top-level Makefile.
+#
+
+src := $(obj)
+
+# Create output directory if not already present
+_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
+
+include $(srctree)/scripts/Kbuild.include
+
+-include include/config/auto.conf
+-include $(obj)/include/autoconf.mk
+
+UBOOTINCLUDE := -I$(obj)/include $(UBOOTINCLUDE)
+
+KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD
+ifeq ($(CONFIG_TPL_BUILD),y)
+KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD
+endif
+
+ifeq ($(CONFIG_TPL_BUILD),y)
+SPL_BIN := u-boot-tpl
+SPL_NAME := tpl
+else
+SPL_BIN := u-boot-spl
+SPL_NAME := spl
+endif
+
+export SPL_NAME
+
+ifdef CONFIG_SPL_BUILD
+SPL_ := SPL_
+ifeq ($(CONFIG_TPL_BUILD),y)
+SPL_TPL_ := TPL_
+else
+SPL_TPL_ := SPL_
+endif
+else
+SPL_ :=
+SPL_TPL_ :=
+endif
+
+ifeq ($(obj)$(CONFIG_SUPPORT_SPL),spl)
+$(error You cannot build SPL without enabling CONFIG_SUPPORT_SPL)
+endif
+ifeq ($(obj)$(CONFIG_SUPPORT_TPL),tpl)
+$(error You cannot build TPL without enabling CONFIG_SUPPORT_TPL)
+endif
+
+include $(srctree)/config.mk
+include $(srctree)/arch/$(ARCH)/Makefile
+
+include $(srctree)/scripts/Makefile.lib
+
+# Enable garbage collection of un-used sections for SPL
+KBUILD_CFLAGS += -ffunction-sections -fdata-sections
+LDFLAGS_FINAL += --gc-sections
+
+ifeq ($(CONFIG_$(SPL_TPL_)STACKPROTECTOR),y)
+KBUILD_CFLAGS += -fstack-protector-strong
+else
+KBUILD_CFLAGS += -fno-stack-protector
+endif
+
+# FIX ME
+cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
+ $(NOSTDINC_FLAGS)
+c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
+
+HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
+
+libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
+libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
+
+ifeq ($(CONFIG_TPL_BUILD),y)
+libs-$(CONFIG_TPL_FRAMEWORK) += common/spl/
+else
+libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
+endif
+libs-y += common/init/
+
+# Special handling for a few options which support SPL/TPL
+ifeq ($(CONFIG_TPL_BUILD),y)
+libs-$(CONFIG_TPL_LIBCOMMON_SUPPORT) += common/ cmd/ env/
+libs-$(CONFIG_TPL_LIBGENERIC_SUPPORT) += lib/
+else
+libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/ env/
+libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
+ifdef CONFIG_SPL_FRAMEWORK
+libs-$(CONFIG_PARTITIONS) += disk/
+endif
+endif
+
+libs-y += drivers/
+libs-$(CONFIG_SPL_USB_GADGET) += drivers/usb/dwc3/
+libs-$(CONFIG_SPL_USB_GADGET) += drivers/usb/cdns3/
+libs-y += dts/
+libs-y += fs/
+libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
+libs-$(CONFIG_SPL_NET_SUPPORT) += net/
+libs-$(CONFIG_SPL_UNIT_TEST) += test/
+
+head-y := $(addprefix $(obj)/,$(head-y))
+libs-y := $(addprefix $(obj)/,$(libs-y))
+u-boot-spl-dirs := $(patsubst %/,%,$(filter %/, $(libs-y)))
+
+libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
+
+# Add GCC lib
+ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
+PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
+PLATFORM_LIBS := $(filter-out %/lib.a, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC)
+endif
+
+u-boot-spl-init := $(head-y)
+u-boot-spl-main := $(libs-y)
+ifdef CONFIG_$(SPL_TPL_)OF_PLATDATA
+platdata-hdr := include/generated/dt-structs-gen.h include/generated/dt-decl.h
+platdata-inst := $(obj)/dts/dt-uclass.o $(obj)/dts/dt-device.o
+platdata-noinst := $(obj)/dts/dt-plat.o
+
+ifdef CONFIG_$(SPL_TPL_)OF_PLATDATA_INST
+u-boot-spl-platdata := $(platdata-inst)
+u-boot-spl-old-platdata := $(platdata-noinst)
+else
+u-boot-spl-platdata := $(platdata-noinst)
+u-boot-spl-old-platdata := $(platdata-inst)
+endif
+
+# Files we need to generate
+u-boot-spl-platdata_c := $(patsubst %.o,%.c,$(u-boot-spl-platdata))
+
+# Files we won't generate and should remove
+u-boot-spl-old-platdata_c := $(patsubst %.o,%.c,$(u-boot-spl-old-platdata))
+endif # OF_PLATDATA
+
+# Linker Script
+# First test whether there's a linker-script for the specific stage defined...
+ifneq ($(CONFIG_$(SPL_TPL_)LDSCRIPT),)
+# need to strip off double quotes
+LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_$(SPL_TPL_)LDSCRIPT:"%"=%))
+else
+# ...then fall back to the generic SPL linker-script
+ifneq ($(CONFIG_SPL_LDSCRIPT),)
+# need to strip off double quotes
+LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%))
+endif
+endif
+
+ifeq ($(wildcard $(LDSCRIPT)),)
+ LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds
+endif
+ifeq ($(wildcard $(LDSCRIPT)),)
+ LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-spl.lds
+endif
+ifeq ($(wildcard $(LDSCRIPT)),)
+ LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot-spl.lds
+endif
+ifeq ($(wildcard $(LDSCRIPT)),)
+$(error could not find linker script)
+endif
+
+# Special flags for CPP when processing the linker script.
+# Pass the version down so we can handle backwards compatibility
+# on the fly.
+LDPPFLAGS += \
+ -include $(srctree)/include/u-boot/u-boot.lds.h \
+ -include $(objtree)/include/config.h \
+ -DCPUDIR=$(CPUDIR) \
+ $(shell $(LD) --version | \
+ sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
+
+# Turn various CONFIG symbols into IMAGE symbols for easy reuse of
+# the scripts between SPL and TPL.
+ifneq ($(CONFIG_$(SPL_TPL_)MAX_SIZE),)
+LDPPFLAGS += -DIMAGE_MAX_SIZE=$(CONFIG_$(SPL_TPL_)MAX_SIZE)
+endif
+ifneq ($(CONFIG_$(SPL_TPL_)TEXT_BASE),)
+LDPPFLAGS += -DIMAGE_TEXT_BASE=$(CONFIG_$(SPL_TPL_)TEXT_BASE)
+endif
+
+MKIMAGEOUTPUT ?= /dev/null
+
+quiet_cmd_mkimage = MKIMAGE $@
+cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
+ >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
+
+quiet_cmd_mkfitimage = MKIMAGE $@
+cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(SPL_ITS) -E $@ \
+ $(if $(KBUILD_VERBOSE:1=), MKIMAGEOUTPUT)
+
+MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE)
+
+MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE)
+
+MLO MLO.byteswap: $(obj)/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+ifeq ($(CONFIG_SYS_SOC),"at91")
+MKIMAGEFLAGS_boot.bin = -T atmelimage
+
+ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y)
+MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params)
+
+$(obj)/boot.bin: $(obj)/../tools/atmel_pmecc_params
+endif
+
+$(obj)/boot.bin: $(obj)/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+else
+ifdef CONFIG_ARCH_ZYNQ
+MKIMAGEFLAGS_boot.bin = -T zynqimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE)
+endif
+ifdef CONFIG_ARCH_ZYNQMP
+ifneq ($(CONFIG_PMUFW_INIT_FILE),"")
+spl/boot.bin: zynqmp-check-pmufw
+zynqmp-check-pmufw: FORCE
+ ( cd $(srctree) && test -r $(CONFIG_PMUFW_INIT_FILE) ) \
+ || ( echo "Cannot read $(CONFIG_PMUFW_INIT_FILE)" && false )
+endif
+MKIMAGEFLAGS_boot.bin = -T zynqmpimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE) \
+ -n "$(shell cd $(srctree); readlink -f $(CONFIG_PMUFW_INIT_FILE))"
+endif
+
+$(obj)/$(SPL_BIN)-align.bin: $(obj)/$(SPL_BIN).bin
+ @dd if=$< of=$@ conv=block,sync bs=4 2>/dev/null;
+
+spl/boot.bin: $(obj)/$(SPL_BIN)-align.bin FORCE
+ $(call if_changed,mkimage)
+endif
+
+INPUTS-y += $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN).sym
+
+ifdef CONFIG_SAMSUNG
+INPUTS-y += $(obj)/$(BOARD)-spl.bin
+endif
+
+ifneq ($(CONFIG_TARGET_SOCFPGA_GEN5)$(CONFIG_TARGET_SOCFPGA_ARRIA10),)
+INPUTS-y += $(obj)/$(SPL_BIN).sfp
+endif
+
+INPUTS-$(CONFIG_TARGET_SOCFPGA_SOC64) += $(obj)/u-boot-spl-dtb.hex
+
+ifdef CONFIG_ARCH_SUNXI
+INPUTS-y += $(obj)/sunxi-spl.bin
+
+ifdef CONFIG_NAND_SUNXI
+INPUTS-y += $(obj)/sunxi-spl-with-ecc.bin
+endif
+endif
+
+ifeq ($(CONFIG_SYS_SOC),"at91")
+INPUTS-y += $(obj)/boot.bin
+endif
+
+ifdef CONFIG_TPL_BUILD
+INPUTS-$(CONFIG_TPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-start16-tpl.bin \
+ $(obj)/u-boot-x86-reset16-tpl.bin
+else
+INPUTS-$(CONFIG_SPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-start16-spl.bin \
+ $(obj)/u-boot-x86-reset16-spl.bin
+endif
+
+INPUTS-$(CONFIG_ARCH_ZYNQ) += $(obj)/boot.bin
+INPUTS-$(CONFIG_ARCH_ZYNQMP) += $(obj)/boot.bin
+
+INPUTS-$(CONFIG_ARCH_MEDIATEK) += $(obj)/u-boot-spl-mtk.bin
+
+all: $(INPUTS-y)
+
+quiet_cmd_cat = CAT $@
+cmd_cat = cat $(filter-out $(PHONY), $^) > $@
+
+quiet_cmd_copy = COPY $@
+ cmd_copy = cp $< $@
+
+ifneq ($(CONFIG_SPL_MULTI_DTB_FIT),y)
+FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).dtb
+else ifeq ($(CONFIG_SPL_MULTI_DTB_FIT_LZO),y)
+FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).multidtb.fit.lzo
+else ifeq ($(CONFIG_SPL_MULTI_DTB_FIT_GZIP),y)
+FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).multidtb.fit.gz
+else
+FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).multidtb.fit
+endif
+
+# Build the .dtb file if:
+# - we are not using OF_PLATDATA
+# - we are using OF_CONTROL
+# - we have either OF_SEPARATE or OF_HOSTFILE
+build_dtb :=
+ifeq ($(CONFIG_$(SPL_TPL_)OF_PLATDATA),)
+ifneq ($(CONFIG_$(SPL_TPL_)OF_CONTROL),)
+ifeq ($(CONFIG_OF_SEPARATE)$(CONFIG_OF_HOSTFILE),y)
+build_dtb := y
+endif
+endif
+endif
+
+ifneq ($(build_dtb),)
+$(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin \
+ $(if $(CONFIG_SPL_SEPARATE_BSS),,$(obj)/$(SPL_BIN)-pad.bin) \
+ $(FINAL_DTB_CONTAINER) FORCE
+ $(call if_changed,cat)
+
+$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-dtb.bin FORCE
+ $(call if_changed,copy)
+else
+$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-nodtb.bin FORCE
+ $(call if_changed,copy)
+endif
+
+# Create a file that pads from the end of u-boot-spl-nodtb.bin to bss_end
+$(obj)/$(SPL_BIN)-pad.bin: $(obj)/$(SPL_BIN)
+ @bss_size_str=$(shell $(NM) $< | awk 'BEGIN {size = 0} /__bss_size/ {size = $$1} END {print "ibase=16; " toupper(size)}' | bc); \
+ dd if=/dev/zero of=$@ bs=1 count=$${bss_size_str} 2>/dev/null;
+
+$(obj)/$(SPL_BIN).dtb: $(obj)/dts/dt-$(SPL_NAME).dtb FORCE
+ $(call if_changed,copy)
+
+pythonpath = PYTHONPATH=scripts/dtc/pylibfdt
+
+DTOC_ARGS := $(pythonpath) $(srctree)/tools/dtoc/dtoc \
+ -d $(obj)/$(SPL_BIN).dtb -p $(SPL_NAME)
+
+ifneq ($(CONFIG_$(SPL_TPL_)OF_PLATDATA_INST),)
+DTOC_ARGS += -i
+endif
+
+quiet_cmd_dtoc = DTOC $@
+cmd_dtoc = $(DTOC_ARGS) -c $(obj)/dts -C include/generated all
+
+quiet_cmd_plat = PLAT $@
+cmd_plat = $(CC) $(c_flags) -c $< -o $(filter-out $(PHONY),$@)
+
+$(obj)/dts/dt-%.o: $(obj)/dts/dt-%.c $(platdata-hdr)
+ $(call if_changed,plat)
+
+# Don't use dts_dir here, since it forces running this expensive rule every time
+$(platdata-hdr) $(u-boot-spl-platdata_c) &: $(obj)/$(SPL_BIN).dtb
+ @[ -d $(obj)/dts ] || mkdir -p $(obj)/dts
+ @# Remove old files since which ones we generate depends on the setting
+ @# of OF_PLATDATA_INST and this might change between builds. Leaving old
+ @# ones around is confusing and it is possible that switching the
+ @# setting again will use the old one instead of regenerating it.
+ @rm -f $(u-boot-spl-all-platdata_c) $(u-boot-spl-all-platdata)
+ $(call if_changed,dtoc)
+
+ifdef CONFIG_SAMSUNG
+ifdef CONFIG_VAR_SIZE_SPL
+VAR_SIZE_PARAM = --vs
+else
+VAR_SIZE_PARAM =
+endif
+$(obj)/$(BOARD)-spl.bin: $(obj)/u-boot-spl.bin
+ $(if $(wildcard $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl),\
+ $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl,\
+ $(objtree)/tools/mkexynosspl) $(VAR_SIZE_PARAM) $< $@
+endif
+
+quiet_cmd_objcopy = OBJCOPY $@
+cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
+
+OBJCOPYFLAGS_$(SPL_BIN)-nodtb.bin = $(SPL_OBJCFLAGS) -O binary \
+ $(if $(CONFIG_$(SPL_TPL_)X86_16BIT_INIT),-R .start16 -R .resetvec)
+
+$(obj)/$(SPL_BIN)-nodtb.bin: $(obj)/$(SPL_BIN) FORCE
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-x86-start16-spl.bin := -O binary -j .start16
+$(obj)/u-boot-x86-start16-spl.bin: $(obj)/u-boot-spl FORCE
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-x86-start16-tpl.bin := -O binary -j .start16
+$(obj)/u-boot-x86-start16-tpl.bin: $(obj)/u-boot-tpl FORCE
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-x86-reset16-spl.bin := -O binary -j .resetvec
+$(obj)/u-boot-x86-reset16-spl.bin: $(obj)/u-boot-spl FORCE
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-x86-reset16-tpl.bin := -O binary -j .resetvec
+$(obj)/u-boot-x86-reset16-tpl.bin: $(obj)/u-boot-tpl FORCE
+ $(call if_changed,objcopy)
+
+LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
+
+# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
+LDFLAGS_$(SPL_BIN) += $(call ld-option, --no-dynamic-linker)
+
+LDFLAGS_$(SPL_BIN) += --build-id=none
+
+# Pick the best-match (i.e. SPL_TEXT_BASE for SPL, TPL_TEXT_BASE for TPL)
+ifneq ($(CONFIG_$(SPL_TPL_)TEXT_BASE),)
+LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_$(SPL_TPL_)TEXT_BASE)
+endif
+
+ifdef CONFIG_TARGET_SOCFPGA_ARRIA10
+MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage_v1
+else
+MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage
+endif
+$(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE
+ $(call if_changed,mkimage)
+
+MKIMAGEFLAGS_sunxi-spl.bin = -T sunxi_egon \
+ -n $(CONFIG_DEFAULT_DEVICE_TREE)
+
+OBJCOPYFLAGS_u-boot-spl-dtb.hex := -I binary -O ihex --change-address=$(CONFIG_SPL_TEXT_BASE)
+
+$(obj)/u-boot-spl-dtb.hex: $(obj)/u-boot-spl-dtb.bin FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin FORCE
+ $(call if_changed,mkimage)
+
+quiet_cmd_sunxi_spl_image_builder = SUNXI_SPL_IMAGE_BUILDER $@
+cmd_sunxi_spl_image_builder = $(objtree)/tools/sunxi-spl-image-builder \
+ -c $(CONFIG_NAND_SUNXI_SPL_ECC_STRENGTH)/$(CONFIG_NAND_SUNXI_SPL_ECC_SIZE) \
+ -p $(CONFIG_SYS_NAND_PAGE_SIZE) \
+ -o $(CONFIG_SYS_NAND_OOBSIZE) \
+ -u $(CONFIG_NAND_SUNXI_SPL_USABLE_PAGE_SIZE) \
+ -e $(CONFIG_SYS_NAND_BLOCK_SIZE) \
+ -s -b $< $@
+$(obj)/sunxi-spl-with-ecc.bin: $(obj)/sunxi-spl.bin
+ $(call if_changed,sunxi_spl_image_builder)
+
+
+# MediaTek's specific SPL build
+MKIMAGEFLAGS_u-boot-spl-mtk.bin = -T mtk_image \
+ -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) \
+ -n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
+
+$(obj)/u-boot-spl-mtk.bin: $(obj)/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+quiet_cmd_sym ?= SYM $@
+ cmd_sym ?= $(OBJDUMP) -t $< > $@
+$(obj)/$(SPL_BIN).sym: $(obj)/$(SPL_BIN) FORCE
+ $(call if_changed,sym)
+
+# Generate linker list symbols references to force compiler to not optimize
+# them away when compiling with LTO
+ifdef CONFIG_LTO
+u-boot-spl-keep-syms-lto := $(obj)/keep-syms-lto.o
+u-boot-spl-keep-syms-lto_c := \
+ $(patsubst $(obj)/%.o,$(obj)/%.c,$(u-boot-spl-keep-syms-lto))
+
+quiet_cmd_keep_syms_lto = KSL $@
+ cmd_keep_syms_lto = \
+ $(srctree)/scripts/gen_ll_addressable_symbols.sh $(NM) $^ > $@
+
+quiet_cmd_keep_syms_lto_cc = KSLCC $@
+ cmd_keep_syms_lto_cc = \
+ $(CC) $(filter-out $(LTO_CFLAGS),$(c_flags)) -c -o $@ $<
+
+$(u-boot-spl-keep-syms-lto_c): $(u-boot-spl-main) $(u-boot-spl-platdata)
+ $(call if_changed,keep_syms_lto)
+$(u-boot-spl-keep-syms-lto): $(u-boot-spl-keep-syms-lto_c)
+ $(call if_changed,keep_syms_lto_cc)
+else
+u-boot-spl-keep-syms-lto :=
+endif
+
+KBUILD_LDFLAGS += $(call ld-option,--no-warn-rwx-segments)
+
+# Rule to link u-boot-spl
+# May be overridden by arch/$(ARCH)/config.mk
+ifdef CONFIG_LTO
+quiet_cmd_u-boot-spl ?= LTO $@
+ cmd_u-boot-spl ?= \
+ ( \
+ cd $(obj) && \
+ $(CC) -nostdlib -nostartfiles $(LTO_FINAL_LDFLAGS) $(c_flags) \
+ $(KBUILD_LDFLAGS:%=-Wl,%) $(LDFLAGS_$(@F):%=-Wl,%) \
+ $(patsubst $(obj)/%,%,$(u-boot-spl-init)) \
+ -Wl,--whole-archive \
+ $(patsubst $(obj)/%,%,$(u-boot-spl-main)) \
+ $(patsubst $(obj)/%,%,$(u-boot-spl-platdata)) \
+ $(patsubst $(obj)/%,%,$(u-boot-spl-keep-syms-lto)) \
+ $(PLATFORM_LIBS) \
+ -Wl,--no-whole-archive \
+ -Wl,-Map,$(SPL_BIN).map -o $(SPL_BIN) \
+ )
+else
+quiet_cmd_u-boot-spl ?= LD $@
+ cmd_u-boot-spl ?= \
+ ( \
+ cd $(obj) && \
+ $(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_$(@F)) \
+ $(patsubst $(obj)/%,%,$(u-boot-spl-init)) \
+ --whole-archive \
+ $(patsubst $(obj)/%,%,$(u-boot-spl-main)) \
+ $(patsubst $(obj)/%,%,$(u-boot-spl-platdata)) \
+ --no-whole-archive \
+ $(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN) \
+ )
+endif
+
+$(obj)/$(SPL_BIN): $(u-boot-spl-platdata) $(u-boot-spl-init) \
+ $(u-boot-spl-main) $(u-boot-spl-keep-syms-lto) \
+ $(obj)/u-boot-spl.lds FORCE
+ $(call if_changed,u-boot-spl)
+
+$(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ;
+
+PHONY += $(u-boot-spl-dirs)
+$(u-boot-spl-dirs): $(u-boot-spl-platdata) prepare
+ $(Q)$(MAKE) $(build)=$@
+
+PHONY += prepare
+prepare:
+ $(Q)$(MAKE) $(build)=$(obj)/.
+
+quiet_cmd_cpp_lds = LDS $@
+cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
+ -D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
+
+$(obj)/u-boot-spl.lds: $(LDSCRIPT) FORCE
+ $(call if_changed_dep,cpp_lds)
+
+# read all saved command lines
+
+targets := $(wildcard $(sort $(targets)))
+cmd_files := $(wildcard $(obj)/.*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
+
+ifneq ($(cmd_files),)
+ $(cmd_files): ; # Do not try to update included dependency files
+ include $(cmd_files)
+endif
+
+PHONY += FORCE
+FORCE:
+
+$(obj)/dts/dt-$(SPL_NAME).dtb: dts/dt.dtb
+ $(Q)$(MAKE) $(build)=$(obj)/dts spl_dtbs
+
+PHONY += dts_dir
+dts_dir:
+ $(shell [ -d $(obj)/dts ] || mkdir -p $(obj)/dts)
+
+# Declare the contents of the .PHONY variable as phony. We keep that
+# information in a variable so we can use it in if_changed and friends.
+.PHONY: $(PHONY)
+
+SPL_OF_LIST_TARGETS = $(patsubst %,dts/%.dtb,$(subst ",,$(CONFIG_SPL_OF_LIST)))
+SHRUNK_ARCH_DTB = $(addprefix $(obj)/,$(SPL_OF_LIST_TARGETS))
+.SECONDEXPANSION:
+$(SHRUNK_ARCH_DTB): $$(patsubst $(obj)/dts/%, arch/$(ARCH)/dts/%, $$@) dts_dir
+ $(call if_changed,fdtgrep)
+
+targets += $(SPL_OF_LIST_TARGETS)
+
+MKIMAGEFLAGS_$(SPL_BIN).multidtb.fit = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
+ -n "Multi DTB fit image for $(SPL_BIN)" -E \
+ $(patsubst %,-b %,$(SHRUNK_ARCH_DTB))
+
+$(obj)/$(SPL_BIN).multidtb.fit: /dev/null $(SHRUNK_ARCH_DTB) FORCE
+ $(call if_changed,mkimage)
+ifneq ($(SOURCE_DATE_EPOCH),)
+ touch -d @$(SOURCE_DATE_EPOCH) $(obj)/$(SPL_BIN).multidtb.fit
+ chmod 0600 $(obj)/$(SPL_BIN).multidtb.fit
+endif
+
+$(obj)/$(SPL_BIN).multidtb.fit.gz: $(obj)/$(SPL_BIN).multidtb.fit
+ @gzip -kf9 $< > $@
+
+$(obj)/$(SPL_BIN).multidtb.fit.lzo: $(obj)/$(SPL_BIN).multidtb.fit
+ @lzop -f9 $< > $@
+
+ifdef CONFIG_ARCH_K3
+tispl.bin: $(obj)/u-boot-spl-nodtb.bin $(SHRUNK_ARCH_DTB) $(SPL_ITS) FORCE
+ $(call if_changed,mkfitimage)
+endif
Index: StarFive/u-boot/create-2021.10-3.8.2-vf2-bootenv-patch/create.patch.sh
===================================================================
--- StarFive/u-boot/create-2021.10-3.8.2-vf2-bootenv-patch/create.patch.sh (nonexistent)
+++ StarFive/u-boot/create-2021.10-3.8.2-vf2-bootenv-patch/create.patch.sh (revision 385)
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+VERSION=2021.10-3.8.2
+
+tar --files-from=file.list -xJvf ../u-boot-$VERSION.tar.xz
+mv u-boot-$VERSION u-boot-$VERSION-orig
+
+cp -rf ./u-boot-$VERSION-new ./u-boot-$VERSION
+
+diff --unified -Nr u-boot-$VERSION-orig u-boot-$VERSION > u-boot-$VERSION-vf2-bootenv.patch
+
+mv u-boot-$VERSION-vf2-bootenv.patch ../patches
+
+rm -rf ./u-boot-$VERSION
+rm -rf ./u-boot-$VERSION-orig
Property changes on: StarFive/u-boot/create-2021.10-3.8.2-vf2-bootenv-patch/create.patch.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: StarFive/u-boot/create-2021.10-3.8.2-vf2-bootenv-patch/file.list
===================================================================
--- StarFive/u-boot/create-2021.10-3.8.2-vf2-bootenv-patch/file.list (nonexistent)
+++ StarFive/u-boot/create-2021.10-3.8.2-vf2-bootenv-patch/file.list (revision 385)
@@ -0,0 +1,2 @@
+u-boot-2021.10-3.8.2/include/config_distro_bootcmd.h
+u-boot-2021.10-3.8.2/include/configs/starfive-visionfive2.h
Index: StarFive/u-boot/create-2021.10-3.8.2-vf2-bootenv-patch/u-boot-2021.10-3.8.2-new/include/config_distro_bootcmd.h
===================================================================
--- StarFive/u-boot/create-2021.10-3.8.2-vf2-bootenv-patch/u-boot-2021.10-3.8.2-new/include/config_distro_bootcmd.h (nonexistent)
+++ StarFive/u-boot/create-2021.10-3.8.2-vf2-bootenv-patch/u-boot-2021.10-3.8.2-new/include/config_distro_bootcmd.h (revision 385)
@@ -0,0 +1,504 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2014
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * Copyright 2014 Red Hat, Inc.
+ */
+
+#ifndef _CONFIG_CMD_DISTRO_BOOTCMD_H
+#define _CONFIG_CMD_DISTRO_BOOTCMD_H
+
+/*
+ * A note on error handling: It is possible for BOOT_TARGET_DEVICES to
+ * reference a device that is not enabled in the U-Boot configuration, e.g.
+ * it may include MMC in the list without CONFIG_CMD_MMC being enabled. Given
+ * that BOOT_TARGET_DEVICES is a macro that's expanded by the C pre-processor
+ * at compile time, it's not possible to detect and report such problems via
+ * a simple #ifdef/#error combination. Still, the code needs to report errors.
+ * The best way I've found to do this is to make BOOT_TARGET_DEVICES expand to
+ * reference a non-existent symbol, and have the name of that symbol encode
+ * the error message. Consequently, this file contains references to e.g.
+ * BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC. Given the
+ * prevalence of capitals here, this looks like a pre-processor macro and
+ * hence seems like it should be all capitals, but it's really an error
+ * message that includes some other pre-processor symbols in the text.
+ */
+
+#define BOOTENV_SHARED_BLKDEV_BODY(devtypel) \
+ "if " #devtypel " dev ${devnum}; then " \
+ "devtype=" #devtypel "; " \
+ "run scan_dev_for_boot_part; " \
+ "fi\0"
+
+#define BOOTENV_SHARED_BLKDEV(devtypel) \
+ #devtypel "_boot=" \
+ BOOTENV_SHARED_BLKDEV_BODY(devtypel)
+
+#define BOOTENV_DEV_BLKDEV(devtypeu, devtypel, instance) \
+ "bootcmd_" #devtypel #instance "=" \
+ "setenv devnum " #instance "; " \
+ "run " #devtypel "_boot\0"
+
+#define BOOTENV_DEV_NAME_BLKDEV(devtypeu, devtypel, instance) \
+ #devtypel #instance " "
+
+#ifdef CONFIG_SANDBOX
+#define BOOTENV_SHARED_HOST BOOTENV_SHARED_BLKDEV(host)
+#define BOOTENV_DEV_HOST BOOTENV_DEV_BLKDEV
+#define BOOTENV_DEV_NAME_HOST BOOTENV_DEV_NAME_BLKDEV
+#else
+#define BOOTENV_SHARED_HOST
+#define BOOTENV_DEV_HOST \
+ BOOT_TARGET_DEVICES_references_HOST_without_CONFIG_SANDBOX
+#define BOOTENV_DEV_NAME_HOST \
+ BOOT_TARGET_DEVICES_references_HOST_without_CONFIG_SANDBOX
+#endif
+
+#ifdef CONFIG_CMD_MMC
+#define BOOTENV_SHARED_MMC BOOTENV_SHARED_BLKDEV(mmc)
+#define BOOTENV_DEV_MMC BOOTENV_DEV_BLKDEV
+#define BOOTENV_DEV_NAME_MMC BOOTENV_DEV_NAME_BLKDEV
+#else
+#define BOOTENV_SHARED_MMC
+#define BOOTENV_DEV_MMC \
+ BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC
+#define BOOTENV_DEV_NAME_MMC \
+ BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC
+#endif
+
+#ifdef CONFIG_CMD_UBIFS
+#define BOOTENV_SHARED_UBIFS \
+ "ubifs_boot=" \
+ "env exists bootubipart || " \
+ "env set bootubipart UBI; " \
+ "env exists bootubivol || " \
+ "env set bootubivol boot; " \
+ "if ubi part ${bootubipart} && " \
+ "ubifsmount ubi${devnum}:${bootubivol}; " \
+ "then " \
+ "devtype=ubi; " \
+ "run scan_dev_for_boot; " \
+ "fi\0"
+#define BOOTENV_DEV_UBIFS BOOTENV_DEV_BLKDEV
+#define BOOTENV_DEV_NAME_UBIFS BOOTENV_DEV_NAME_BLKDEV
+#else
+#define BOOTENV_SHARED_UBIFS
+#define BOOTENV_DEV_UBIFS \
+ BOOT_TARGET_DEVICES_references_UBIFS_without_CONFIG_CMD_UBIFS
+#define BOOTENV_DEV_NAME_UBIFS \
+ BOOT_TARGET_DEVICES_references_UBIFS_without_CONFIG_CMD_UBIFS
+#endif
+
+#ifdef CONFIG_EFI_LOADER
+#if defined(CONFIG_ARM64)
+#define BOOTEFI_NAME "bootaa64.efi"
+#elif defined(CONFIG_ARM)
+#define BOOTEFI_NAME "bootarm.efi"
+#elif defined(CONFIG_X86_RUN_32BIT)
+#define BOOTEFI_NAME "bootia32.efi"
+#elif defined(CONFIG_X86_RUN_64BIT)
+#define BOOTEFI_NAME "bootx64.efi"
+#elif defined(CONFIG_ARCH_RV32I)
+#define BOOTEFI_NAME "bootriscv32.efi"
+#elif defined(CONFIG_ARCH_RV64I)
+#define BOOTEFI_NAME "bootriscv64.efi"
+#endif
+#endif
+
+#ifdef BOOTEFI_NAME
+#if defined(CONFIG_ARM) && !defined(CONFIG_ARM64)
+/*
+ * On 32bit ARM systems there is a reasonable number of systems that follow
+ * the $soc-$board$boardver.dtb name scheme for their device trees. Use that
+ * scheme if we don't have an explicit fdtfile variable.
+ */
+#define BOOTENV_EFI_SET_FDTFILE_FALLBACK \
+ "if test -z \"${fdtfile}\" -a -n \"${soc}\"; then " \
+ "setenv efi_fdtfile ${soc}-${board}${boardver}.dtb; " \
+ "fi; "
+#else
+#ifndef BOOTENV_EFI_SET_FDTFILE_FALLBACK
+#define BOOTENV_EFI_SET_FDTFILE_FALLBACK
+#endif
+#endif
+
+#ifdef CONFIG_CMD_BOOTEFI_BOOTMGR
+#define BOOTENV_EFI_BOOTMGR \
+ "boot_efi_bootmgr=" \
+ "if fdt addr ${fdt_addr_r}; then " \
+ "bootefi bootmgr ${fdt_addr_r};" \
+ "else " \
+ "bootefi bootmgr;" \
+ "fi\0"
+#else
+#define BOOTENV_EFI_BOOTMGR
+#endif
+
+#define BOOTENV_SHARED_EFI \
+ BOOTENV_EFI_BOOTMGR \
+ \
+ "boot_efi_binary=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${kernel_addr_r} efi/boot/"BOOTEFI_NAME"; " \
+ "if fdt addr ${fdt_addr_r}; then " \
+ "bootefi ${kernel_addr_r} ${fdt_addr_r};" \
+ "else " \
+ "bootefi ${kernel_addr_r} ${fdtcontroladdr};" \
+ "fi\0" \
+ \
+ "load_efi_dtb=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${fdt_addr_r} ${prefix}${efi_fdtfile}\0" \
+ \
+ "efi_dtb_prefixes=/ /dtb/ /dtb/current/\0" \
+ "scan_dev_for_efi=" \
+ "setenv efi_fdtfile ${fdtfile}; " \
+ BOOTENV_EFI_SET_FDTFILE_FALLBACK \
+ "for prefix in ${efi_dtb_prefixes}; do " \
+ "if test -e ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${prefix}${efi_fdtfile}; then " \
+ "run load_efi_dtb; " \
+ "fi;" \
+ "done;" \
+ "run boot_efi_bootmgr;" \
+ "if test -e ${devtype} ${devnum}:${distro_bootpart} " \
+ "efi/boot/"BOOTEFI_NAME"; then " \
+ "echo Found EFI removable media binary " \
+ "efi/boot/"BOOTEFI_NAME"; " \
+ "run boot_efi_binary; " \
+ "echo EFI LOAD FAILED: continuing...; " \
+ "fi; " \
+ "setenv efi_fdtfile\0"
+#define SCAN_DEV_FOR_EFI "run scan_dev_for_efi;"
+#else
+#define BOOTENV_SHARED_EFI
+#define SCAN_DEV_FOR_EFI
+#endif
+
+#ifdef CONFIG_SATA
+#define BOOTENV_SHARED_SATA BOOTENV_SHARED_BLKDEV(sata)
+#define BOOTENV_DEV_SATA BOOTENV_DEV_BLKDEV
+#define BOOTENV_DEV_NAME_SATA BOOTENV_DEV_NAME_BLKDEV
+#else
+#define BOOTENV_SHARED_SATA
+#define BOOTENV_DEV_SATA \
+ BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_SATA
+#define BOOTENV_DEV_NAME_SATA \
+ BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_SATA
+#endif
+
+#ifdef CONFIG_NVME
+#define BOOTENV_RUN_NVME_INIT "run nvme_init; "
+#define BOOTENV_SET_NVME_NEED_INIT "setenv nvme_need_init; "
+#define BOOTENV_SHARED_NVME \
+ "nvme_init=" \
+ "if ${nvme_need_init}; then " \
+ "setenv nvme_need_init false; " \
+ "nvme scan; " \
+ "fi\0" \
+ \
+ "nvme_boot=" \
+ BOOTENV_RUN_PCI_ENUM \
+ BOOTENV_RUN_NVME_INIT \
+ BOOTENV_SHARED_BLKDEV_BODY(nvme)
+#define BOOTENV_DEV_NVME BOOTENV_DEV_BLKDEV
+#define BOOTENV_DEV_NAME_NVME BOOTENV_DEV_NAME_BLKDEV
+#else
+#define BOOTENV_RUN_NVME_INIT
+#define BOOTENV_SET_NVME_NEED_INIT
+#define BOOTENV_SHARED_NVME
+#define BOOTENV_DEV_NVME \
+ BOOT_TARGET_DEVICES_references_NVME_without_CONFIG_NVME
+#define BOOTENV_DEV_NAME_NVME \
+ BOOT_TARGET_DEVICES_references_NVME_without_CONFIG_NVME
+#endif
+
+#ifdef CONFIG_SCSI
+#define BOOTENV_RUN_SCSI_INIT "run scsi_init; "
+#define BOOTENV_SET_SCSI_NEED_INIT "scsi_need_init=; "
+#define BOOTENV_SHARED_SCSI \
+ "scsi_init=" \
+ "if ${scsi_need_init}; then " \
+ "scsi_need_init=false; " \
+ "scsi scan; " \
+ "fi\0" \
+ \
+ "scsi_boot=" \
+ BOOTENV_RUN_SCSI_INIT \
+ BOOTENV_SHARED_BLKDEV_BODY(scsi)
+#define BOOTENV_DEV_SCSI BOOTENV_DEV_BLKDEV
+#define BOOTENV_DEV_NAME_SCSI BOOTENV_DEV_NAME_BLKDEV
+#else
+#define BOOTENV_RUN_SCSI_INIT
+#define BOOTENV_SET_SCSI_NEED_INIT
+#define BOOTENV_SHARED_SCSI
+#define BOOTENV_DEV_SCSI \
+ BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI
+#define BOOTENV_DEV_NAME_SCSI \
+ BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI
+#endif
+
+#ifdef CONFIG_IDE
+#define BOOTENV_RUN_IDE_INIT "run ide_init; "
+#define BOOTENV_SET_IDE_NEED_INIT "setenv ide_need_init; "
+#define BOOTENV_SHARED_IDE \
+ "ide_init=" \
+ "if ${ide_need_init}; then " \
+ "setenv ide_need_init false; " \
+ "ide reset; " \
+ "fi\0" \
+ \
+ "ide_boot=" \
+ BOOTENV_RUN_IDE_INIT \
+ BOOTENV_SHARED_BLKDEV_BODY(ide)
+#define BOOTENV_DEV_IDE BOOTENV_DEV_BLKDEV
+#define BOOTENV_DEV_NAME_IDE BOOTENV_DEV_NAME_BLKDEV
+#else
+#define BOOTENV_RUN_IDE_INIT
+#define BOOTENV_SET_IDE_NEED_INIT
+#define BOOTENV_SHARED_IDE
+#define BOOTENV_DEV_IDE \
+ BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_IDE
+#define BOOTENV_DEV_NAME_IDE \
+ BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_IDE
+#endif
+
+#if defined(CONFIG_PCI)
+#define BOOTENV_RUN_PCI_ENUM "run boot_pci_enum; "
+#define BOOTENV_SHARED_PCI \
+ "boot_pci_enum=pci enum\0"
+#else
+#define BOOTENV_RUN_PCI_ENUM
+#define BOOTENV_SHARED_PCI
+#endif
+
+#ifdef CONFIG_CMD_USB
+#define BOOTENV_RUN_NET_USB_START "run boot_net_usb_start; "
+#define BOOTENV_SHARED_USB \
+ "boot_net_usb_start=usb start\0" \
+ "usb_boot=" \
+ "usb start; " \
+ BOOTENV_SHARED_BLKDEV_BODY(usb)
+#define BOOTENV_DEV_USB BOOTENV_DEV_BLKDEV
+#define BOOTENV_DEV_NAME_USB BOOTENV_DEV_NAME_BLKDEV
+#else
+#define BOOTENV_RUN_NET_USB_START
+#define BOOTENV_SHARED_USB
+#define BOOTENV_DEV_USB \
+ BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB
+#define BOOTENV_DEV_NAME_USB \
+ BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB
+#endif
+
+#ifdef CONFIG_CMD_VIRTIO
+#define BOOTENV_RUN_VIRTIO_INIT "run virtio_init; "
+#define BOOTENV_SET_VIRTIO_NEED_INIT "virtio_need_init=; "
+#define BOOTENV_SHARED_VIRTIO \
+ "virtio_init=" \
+ "if ${virtio_need_init}; then " \
+ "virtio_need_init=false; " \
+ "virtio scan; " \
+ "fi\0" \
+ \
+ "virtio_boot=" \
+ BOOTENV_RUN_PCI_ENUM \
+ BOOTENV_RUN_VIRTIO_INIT \
+ BOOTENV_SHARED_BLKDEV_BODY(virtio)
+#define BOOTENV_DEV_VIRTIO BOOTENV_DEV_BLKDEV
+#define BOOTENV_DEV_NAME_VIRTIO BOOTENV_DEV_NAME_BLKDEV
+#else
+#define BOOTENV_RUN_VIRTIO_INIT
+#define BOOTENV_SET_VIRTIO_NEED_INIT
+#define BOOTENV_SHARED_VIRTIO
+#define BOOTENV_DEV_VIRTIO \
+ BOOT_TARGET_DEVICES_references_VIRTIO_without_CONFIG_CMD_VIRTIO
+#define BOOTENV_DEV_NAME_VIRTIO \
+ BOOT_TARGET_DEVICES_references_VIRTIO_without_CONFIG_CMD_VIRTIO
+#endif
+
+#if defined(CONFIG_CMD_DHCP)
+#if defined(CONFIG_EFI_LOADER)
+/* http://www.iana.org/assignments/dhcpv6-parameters/dhcpv6-parameters.xml */
+#if defined(CONFIG_ARM64) || defined(__aarch64__)
+#define BOOTENV_EFI_PXE_ARCH "0xb"
+#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00011:UNDI:003000"
+#elif defined(CONFIG_ARM) || defined(__arm__)
+#define BOOTENV_EFI_PXE_ARCH "0xa"
+#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00010:UNDI:003000"
+#elif defined(CONFIG_X86) || defined(__x86_64__)
+#define BOOTENV_EFI_PXE_ARCH "0x7"
+#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00007:UNDI:003000"
+#elif defined(__i386__)
+#define BOOTENV_EFI_PXE_ARCH "0x6"
+#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00006:UNDI:003000"
+#elif defined(CONFIG_ARCH_RV32I) || ((defined(__riscv) && __riscv_xlen == 32))
+#define BOOTENV_EFI_PXE_ARCH "0x19"
+#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00025:UNDI:003000"
+#elif defined(CONFIG_ARCH_RV64I) || ((defined(__riscv) && __riscv_xlen == 64))
+#define BOOTENV_EFI_PXE_ARCH "0x1b"
+#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00027:UNDI:003000"
+#elif defined(CONFIG_SANDBOX)
+# error "sandbox EFI support is only supported on ARM and x86"
+#else
+#error Please specify an EFI client identifier
+#endif
+
+/*
+ * Ask the dhcp server for an EFI binary. If we get one, check for a
+ * device tree in the same folder. Then boot everything. If the file was
+ * not an EFI binary, we just return from the bootefi command and continue.
+ */
+#define BOOTENV_EFI_RUN_DHCP \
+ "setenv efi_fdtfile ${fdtfile}; " \
+ BOOTENV_EFI_SET_FDTFILE_FALLBACK \
+ "setenv efi_old_vci ${bootp_vci};" \
+ "setenv efi_old_arch ${bootp_arch};" \
+ "setenv bootp_vci " BOOTENV_EFI_PXE_VCI ";" \
+ "setenv bootp_arch " BOOTENV_EFI_PXE_ARCH ";" \
+ "if dhcp ${kernel_addr_r}; then " \
+ "tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};" \
+ "if fdt addr ${fdt_addr_r}; then " \
+ "bootefi ${kernel_addr_r} ${fdt_addr_r}; " \
+ "else " \
+ "bootefi ${kernel_addr_r} ${fdtcontroladdr};" \
+ "fi;" \
+ "fi;" \
+ "setenv bootp_vci ${efi_old_vci};" \
+ "setenv bootp_arch ${efi_old_arch};" \
+ "setenv efi_fdtfile;" \
+ "setenv efi_old_arch;" \
+ "setenv efi_old_vci;"
+#else
+#define BOOTENV_EFI_RUN_DHCP
+#endif
+#define BOOTENV_DEV_DHCP(devtypeu, devtypel, instance) \
+ "bootcmd_dhcp=" \
+ "devtype=" #devtypel "; " \
+ BOOTENV_RUN_NET_USB_START \
+ BOOTENV_RUN_PCI_ENUM \
+ "if dhcp ${scriptaddr} ${boot_script_dhcp}; then " \
+ "source ${scriptaddr}; " \
+ "fi;" \
+ BOOTENV_EFI_RUN_DHCP \
+ "\0"
+#define BOOTENV_DEV_NAME_DHCP(devtypeu, devtypel, instance) \
+ "dhcp "
+#else
+#define BOOTENV_DEV_DHCP \
+ BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP
+#define BOOTENV_DEV_NAME_DHCP \
+ BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP
+#endif
+
+#if defined(CONFIG_CMD_DHCP) && defined(CONFIG_CMD_PXE)
+#define BOOTENV_DEV_PXE(devtypeu, devtypel, instance) \
+ "bootcmd_pxe=" \
+ BOOTENV_RUN_NET_USB_START \
+ BOOTENV_RUN_PCI_ENUM \
+ "dhcp; " \
+ "if pxe get; then " \
+ "pxe boot; " \
+ "fi\0"
+#define BOOTENV_DEV_NAME_PXE(devtypeu, devtypel, instance) \
+ "pxe "
+#else
+#define BOOTENV_DEV_PXE \
+ BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE
+#define BOOTENV_DEV_NAME_PXE \
+ BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE
+#endif
+
+#define BOOTENV_DEV_NAME(devtypeu, devtypel, instance) \
+ BOOTENV_DEV_NAME_##devtypeu(devtypeu, devtypel, instance)
+#define BOOTENV_BOOT_TARGETS \
+ "boot_targets=" BOOT_TARGET_DEVICES(BOOTENV_DEV_NAME) "\0"
+
+#define BOOTENV_DEV(devtypeu, devtypel, instance) \
+ BOOTENV_DEV_##devtypeu(devtypeu, devtypel, instance)
+#define BOOTENV \
+ BOOTENV_SHARED_HOST \
+ BOOTENV_SHARED_MMC \
+ BOOTENV_SHARED_PCI \
+ BOOTENV_SHARED_USB \
+ BOOTENV_SHARED_SATA \
+ BOOTENV_SHARED_SCSI \
+ BOOTENV_SHARED_NVME \
+ BOOTENV_SHARED_IDE \
+ BOOTENV_SHARED_UBIFS \
+ BOOTENV_SHARED_EFI \
+ BOOTENV_SHARED_VIRTIO \
+ "boot_prefixes=/ /boot/\0" \
+ "boot_scripts=boot.scr.uimg boot.scr\0" \
+ "boot_script_dhcp=boot.scr.uimg\0" \
+ BOOTENV_BOOT_TARGETS \
+ \
+ "boot_syslinux_conf=extlinux/extlinux.conf\0" \
+ "boot_extlinux=" \
+ "sysboot ${devtype} ${devnum}:${distro_bootpart} any " \
+ "${scriptaddr} ${prefix}${boot_syslinux_conf}\0" \
+ \
+ "scan_dev_for_extlinux=" \
+ "if test -e ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${prefix}${boot_syslinux_conf}; then " \
+ "echo Found ${prefix}${boot_syslinux_conf}; " \
+ "run boot_extlinux; " \
+ "echo SCRIPT FAILED: continuing...; " \
+ "fi\0" \
+ \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "source ${scriptaddr}\0" \
+ \
+ "scan_dev_for_scripts=" \
+ "for script in ${boot_scripts}; do " \
+ "if test -e ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${prefix}${script}; then " \
+ "echo Found U-Boot script " \
+ "${prefix}${script}; " \
+ "run boot_a_script; " \
+ "echo SCRIPT FAILED: continuing...; " \
+ "fi; " \
+ "done\0" \
+ \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_extlinux; " \
+ "run scan_dev_for_scripts; " \
+ "done;" \
+ SCAN_DEV_FOR_EFI \
+ "\0" \
+ \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} -bootable devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done; " \
+ "setenv devplist\0" \
+ \
+ BOOT_TARGET_DEVICES(BOOTENV_DEV) \
+ \
+ "distro_bootcmd=" BOOTENV_SET_SCSI_NEED_INIT \
+ BOOTENV_SET_NVME_NEED_INIT \
+ BOOTENV_SET_IDE_NEED_INIT \
+ BOOTENV_SET_VIRTIO_NEED_INIT \
+ "for target in ${boot_targets}; do " \
+ "run bootcmd_${target}; " \
+ "done\0"
+
+#ifndef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd"
+#endif
+
+#endif /* _CONFIG_CMD_DISTRO_BOOTCMD_H */
Index: StarFive/u-boot/create-2021.10-3.8.2-vf2-bootenv-patch/u-boot-2021.10-3.8.2-new/include/configs/starfive-visionfive2.h
===================================================================
--- StarFive/u-boot/create-2021.10-3.8.2-vf2-bootenv-patch/u-boot-2021.10-3.8.2-new/include/configs/starfive-visionfive2.h (nonexistent)
+++ StarFive/u-boot/create-2021.10-3.8.2-vf2-bootenv-patch/u-boot-2021.10-3.8.2-new/include/configs/starfive-visionfive2.h (revision 385)
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 Shanghai StarFive Technology Co., Ltd.
+ * YanHong Wang <yanhong.wang@starfivetech.com>
+ */
+
+
+#ifndef _STARFIVE_VISIONFIVE2_H
+#define _STARFIVE_VISIONFIVE2_H
+
+#include <version.h>
+#include <linux/sizes.h>
+
+#ifdef CONFIG_SPL
+
+#define CONFIG_SPL_MAX_SIZE 0x00040000
+#define CONFIG_SPL_BSS_START_ADDR 0x08040000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x00010000
+#define CONFIG_SYS_SPL_MALLOC_START 0x42000000
+
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00800000
+
+#define CONFIG_SPL_STACK (0x08000000 + 0x00180000 - \
+ GENERATED_GBL_DATA_SIZE)
+#define STARFIVE_SPL_BOOT_LOAD_ADDR 0x60000000
+#endif
+
+#define CONFIG_SYS_BOOTM_LEN SZ_64M
+
+
+#define CONFIG_SYS_CACHELINE_SIZE 64
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+
+/*
+ * Print Buffer Size
+ */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/*
+ * max number of command args
+ */
+#define CONFIG_SYS_MAXARGS 16
+
+/*
+ * Boot Argument Buffer Size
+ */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+/*
+ * Size of malloc() pool
+ * 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough
+ */
+#define CONFIG_SYS_MALLOC_LEN SZ_8M
+
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+
+/* Init Stack Pointer */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_8M)
+
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_16M)
+#define CONFIG_STANDALONE_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_16M)
+
+#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
+
+/*
+ * Ethernet
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_DW_ALTDESCRIPTOR
+#define CONFIG_ARP_TIMEOUT 500
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 192.168.120.230
+#define CONFIG_IP_DEFRAG
+#ifndef CONFIG_NET_MAXDEFRAG
+#define CONFIG_NET_MAXDEFRAG 16384
+#endif
+#endif
+
+/* HACK these should have '#if defined (stuff) around them like zynqp*/
+#define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 1) func(MMC, mmc, 0) func(NVME, nvme, 0) func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+
+#include <environment/distro/sf.h>
+
+#define TYPE_GUID_LOADER1 "5B193300-FC78-40CD-8002-E86C45580B47"
+#define TYPE_GUID_LOADER2 "2E54B353-1271-4842-806F-E436D6AF6985"
+#define TYPE_GUID_SYSTEM "0FC63DAF-8483-4772-8E79-3D69D8477DE4"
+
+#define CPU_VOL_1020_SET \
+ "cpu_vol_1020_set=" \
+ "fdt set /opp-table-0/opp-1500000000 opp-microvolt <1020000>;\0"
+
+#define CPU_VOL_1040_SET \
+ "cpu_vol_1040_set=" \
+ "fdt set /opp-table-0/opp-1500000000 opp-microvolt <1040000>;\0"
+
+#define CPU_VOL_1060_SET \
+ "cpu_vol_1060_set=" \
+ "fdt set /opp-table-0/opp-1500000000 opp-microvolt <1060000>;\0"
+
+#define CPU_SPEED_1250_SET \
+ "cpu_speed_1250_set=" \
+ "fdt rm /opp-table-0/opp-375000000;" \
+ "fdt rm /opp-table-0/opp-500000000;" \
+ "fdt rm /opp-table-0/opp-750000000;" \
+ "fdt rm /opp-table-0/opp-1500000000;\0"
+
+#define CPU_SPEED_1500_SET \
+ "cpu_speed_1500_set=" \
+ "fdt rm /opp-table-0/opp-312500000;" \
+ "fdt rm /opp-table-0/opp-417000000;" \
+ "fdt rm /opp-table-0/opp-625000000;" \
+ "fdt rm /opp-table-0/opp-1250000000;\0"
+
+#define CPU_FREQ_VOL_SET \
+ "cpu_vol_set=" \
+ "if test ${cpu_max_vol} = 1000000; then " \
+ "run cpu_speed_1250_set; " \
+ "else " \
+ "run cpu_speed_1500_set; " \
+ "if test ${cpu_max_vol} = 1060000; then " \
+ "run cpu_vol_1060_set; " \
+ "elif test ${cpu_max_vol} = 1020000; then " \
+ "run cpu_vol_1020_set; " \
+ "else " \
+ "run cpu_vol_1040_set; " \
+ "fi; " \
+ "fi; \0"
+
+#define CMA_SIZE_SET \
+ "cma_start=70000000\0" \
+ "cma_1g=b000000\0" \
+ "cma_2g=20000000\0" \
+ "cma_4g=40000000\0" \
+ "cma_8g=60000000\0" \
+ "cma_node=/reserved-memory/linux,cma\0" \
+ "cma_ddr1g_set=" \
+ "fdt set ${cma_node} size <0x0 0x${cma_1g}>;" \
+ "fdt set ${cma_node} alloc-ranges <0x0 0x${cma_start} 0x0 0x${cma_1g}>;\0" \
+ "cma_ddr2g_set=" \
+ "fdt set ${cma_node} size <0x0 0x${cma_2g}>;" \
+ "fdt set ${cma_node} alloc-ranges <0x0 0x${cma_start} 0x0 0x${cma_2g}>;\0" \
+ "cma_ddr4g_set=" \
+ "fdt set ${cma_node} size <0x0 0x${cma_4g}>;" \
+ "fdt set ${cma_node} alloc-ranges <0x0 0x${cma_start} 0x0 0x${cma_4g}>;\0" \
+ "cma_ddr8g_set=" \
+ "fdt set ${cma_node} size <0x0 0x${cma_8g}>;" \
+ "fdt set ${cma_node} alloc-ranges <0x0 0x${cma_start} 0x0 0x${cma_8g}>;\0" \
+ "cma_resize=" \
+ "if test ${memory_size} -eq 40000000; then " \
+ "run cma_ddr1g_set;" \
+ "elif test ${memory_size} -eq 80000000; then " \
+ "run cma_ddr2g_set;" \
+ "elif test ${memory_size} -eq 100000000; then " \
+ "run cma_ddr4g_set;" \
+ "elif test ${memory_size} -ge 200000000; then " \
+ "run cma_ddr8g_set;" \
+ "fi; \0 "
+
+#define PARTS_DEFAULT \
+ "name=loader1,start=17K,size=1M,type=${type_guid_gpt_loader1};" \
+ "name=loader2,size=4MB,type=${type_guid_gpt_loader2};" \
+ "name=system,size=-,bootable,type=${type_guid_gpt_system};"
+
+#define CHIPA_GMAC_SET \
+ "chipa_gmac_set=" \
+ "fdt set /soc/ethernet@16030000/ethernet-phy@0 tx_inverted_10 <0x0>;" \
+ "fdt set /soc/ethernet@16030000/ethernet-phy@0 tx_inverted_100 <0x0>;" \
+ "fdt set /soc/ethernet@16030000/ethernet-phy@0 tx_inverted_1000 <0x0>;" \
+ "fdt set /soc/ethernet@16030000/ethernet-phy@0 tx_delay_sel <0x9>;" \
+ "fdt set /soc/ethernet@16040000/ethernet-phy@1 tx_inverted_10 <0x0>;" \
+ "fdt set /soc/ethernet@16040000/ethernet-phy@1 tx_inverted_100 <0x0>;" \
+ "fdt set /soc/ethernet@16040000/ethernet-phy@1 tx_inverted_1000 <0x0>;" \
+ "fdt set /soc/ethernet@16040000/ethernet-phy@1 tx_delay_sel <0x9> \0"
+
+#define VISIONFIVE2_MEM_SET \
+ "visionfive2_mem_set=" \
+ "fdt memory ${memory_addr} ${memory_size};" \
+ "run cma_resize; \0"
+
+#define CHIPA_SET \
+ "chipa_set=" \
+ "if test ${chip_vision} = A; then " \
+ "run chipa_gmac_set;" \
+ "fi; \0" \
+ "chipa_set_uboot=" \
+ "fdt addr ${uboot_fdt_addr};" \
+ "run chipa_set;\0" \
+ "chipa_set_linux=" \
+ "fdt addr ${fdt_addr_r};" \
+ "run visionfive2_mem_set;" \
+ "run chipa_set;\0"
+
+#define VF2_SDK_BOOTENV \
+ "bootenv=uEnv.txt\0" \
+ "bootenv_sdk=vf2_uEnv.txt\0" \
+ "boot_devs=mmc nvme\0" \
+ "nvme_devnum=0\0" \
+ "emmc_devnum=0\0" \
+ "sd_devnum=1\0" \
+ "mmc_devnum_l=1 0\0" \
+ "nvme_devnum_l=0 0\0"
+
+#define JH7110_SDK_BOOTENV \
+ "bootdir=/boot\0" \
+ "bootpart=3\0" \
+ "rootpart=4\0" \
+ "load_sdk_uenv=" \
+ "fatload ${bootdev} ${devnum}:${bootpart} ${loadaddr} ${bootenv_sdk};" \
+ "env import -t ${loadaddr} ${filesize}; \0" \
+ "mmc_test_and_boot=" \
+ "if mmc dev ${devnum}; then " \
+ "echo Try booting from MMC${devnum} ...; " \
+ "setenv sdev_blk mmcblk${devnum}p${rootpart};" \
+ "run load_sdk_uenv; run boot2;" \
+ "fi;\0" \
+ "bootenv_mmc=" \
+ "setenv bootdev mmc;" \
+ "if test ${bootmode} = flash; then " \
+ "for mmc_devnum in ${mmc_devnum_l}; do " \
+ "setenv devnum ${mmc_devnum}; " \
+ "run mmc_test_and_boot;" \
+ "done;" \
+ "fi; " \
+ "if test ${bootmode} = sd; then " \
+ "setenv devnum ${sd_devnum};" \
+ "run mmc_test_and_boot;" \
+ "fi; " \
+ "if test ${bootmode} = emmc; then " \
+ "setenv devnum ${emmc_devnum};"\
+ "run mmc_test_and_boot;" \
+ "fi; \0" \
+ "bootenv_nvme=" \
+ "if test ${bootmode} = flash; then " \
+ "for nvme_devnum in ${nvme_devnum_l}; do " \
+ "setenv devnum ${nvme_devnum};" \
+ "if pci enum; then " \
+ "nvme scan; " \
+ "fi; " \
+ "if nvme dev ${devnum}; then " \
+ "echo Try booting from NVME${devnum} ...; " \
+ "setenv bootdev nvme;" \
+ "setenv sdev_blk nvme${devnum}n1p${rootpart};" \
+ "run load_sdk_uenv; run boot2;" \
+ "fi; " \
+ "done; " \
+ "fi; \0" \
+ "sdk_boot_env=" \
+ "for bootdev_s in ${boot_devs}; do " \
+ "run bootenv_${bootdev_s}; " \
+ "done;\0" \
+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0"
+
+#define JH7110_DISTRO_BOOTENV \
+ "bootdir=/boot\0" \
+ "bootpart=3\0" \
+ "rootpart=4\0" \
+ "bootcmd_nvme1=setenv devnum 1; run mmc_boot\0" \
+ "bootcmd_nvme0=setenv devnum 0; run nvme_boot\0" \
+ "load_distro_uenv=" \
+ "fatload ${bootdev} ${devnum}:${bootpart} ${loadaddr} /${bootenv}; " \
+ "env import ${loadaddr} ${filesize}; \0" \
+ "fdt_loaddtb=" \
+ "fatload ${bootdev} ${devnum}:${bootpart} ${fdt_addr_r} /dtbs/${fdtfile}; fdt addr ${fdt_addr_r}; \0" \
+ "fdt_sizecheck=" \
+ "fatsize ${bootdev} ${devnum}:${bootpart} /dtbs/${fdtfile}; \0" \
+ "set_fdt_distro=" \
+ "run chipa_set_linux; run cpu_vol_set;" \
+ "fatwrite ${bootdev} ${devnum}:${bootpart} ${fdt_addr_r} /dtbs/${fdtfile} ${filesize}; \0" \
+ "bootcmd_distro=" \
+ "run load_distro_uenv; " \
+ "run fdt_loaddtb; run fdt_sizecheck; run set_fdt_distro; " \
+ "sysboot ${bootdev} ${devnum}:${bootpart} fat ${scriptaddr} /${boot_syslinux_conf}; \0" \
+ "distro_mmc_test_and_boot=" \
+ "if mmc dev ${devnum}; then " \
+ "echo Try booting from MMC${devnum} ...; " \
+ "run bootcmd_distro;" \
+ "fi;\0" \
+ "distro_bootenv_mmc=" \
+ "setenv bootdev mmc;" \
+ "if test ${bootmode} = flash; then " \
+ "for mmc_devnum in ${mmc_devnum_l}; do "\
+ "setenv devnum ${mmc_devnum}; " \
+ "run distro_mmc_test_and_boot;" \
+ "done;" \
+ "fi; " \
+ "if test ${bootmode} = sd; then " \
+ "setenv devnum ${sd_devnum};" \
+ "run distro_mmc_test_and_boot;" \
+ "fi; " \
+ "if test ${bootmode} = emmc; then " \
+ "setenv devnum ${emmc_devnum};"\
+ "run distro_mmc_test_and_boot;" \
+ "fi; \0" \
+ "distro_bootenv_nvme=" \
+ "if test ${bootmode} = flash; then " \
+ "for nvme_devnum in ${nvme_devnum_l}; do " \
+ "setenv devnum ${nvme_devnum};" \
+ "if pci enum; then " \
+ "nvme scan; " \
+ "fi; " \
+ "if nvme dev ${devnum}; then " \
+ "echo Try booting from NVME${devnum} ...; " \
+ "setenv bootdev nvme;" \
+ "run bootcmd_distro; " \
+ "fi; " \
+ "done; " \
+ "fi; \0" \
+ "distro_boot_env=" \
+ "echo Tring booting distro ...;" \
+ "for bootdev_s in ${boot_devs}; do " \
+ "run distro_bootenv_${bootdev_s}; " \
+ "done; \0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "fdt_high=0xffffffffffffffff\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "kernel_addr_r=0x40200000\0" \
+ "kernel_comp_addr_r=0x5a000000\0" \
+ "kernel_comp_size=0x4000000\0" \
+ "fdt_addr_r=0x46000000\0" \
+ "scriptaddr=0x43900000\0" \
+ "script_offset_f=0x1fff000\0" \
+ "script_size_f=0x1000\0" \
+ "pxefile_addr_r=0x45900000\0" \
+ "ramdisk_addr_r=0x46100000\0" \
+ "fdtoverlay_addr_r=0x4f000000\0" \
+ "loadaddr=0x60000000\0" \
+ VF2_SDK_BOOTENV \
+ JH7110_SDK_BOOTENV \
+ JH7110_DISTRO_BOOTENV \
+ CHIPA_GMAC_SET \
+ CHIPA_SET \
+ CPU_VOL_1020_SET \
+ CPU_VOL_1040_SET \
+ CPU_VOL_1060_SET \
+ CPU_SPEED_1250_SET \
+ CPU_SPEED_1500_SET \
+ CPU_FREQ_VOL_SET \
+ CMA_SIZE_SET \
+ VISIONFIVE2_MEM_SET \
+ "type_guid_gpt_loader1=" TYPE_GUID_LOADER1 "\0" \
+ "type_guid_gpt_loader2=" TYPE_GUID_LOADER2 "\0" \
+ "type_guid_gpt_system=" TYPE_GUID_SYSTEM "\0" \
+ "partitions=" PARTS_DEFAULT "\0" \
+ BOOTENV \
+ BOOTENV_SF
+
+#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600}
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/* 6.25MHz RTC clock, StarFive JH7110*/
+#define CONFIG_SYS_HZ_CLOCK 4000000
+
+#define __io
+
+#define memset_io(c, v, l) memset((c), (v), (l))
+#define memcpy_fromio(a, c, l) memcpy((a), (c), (l))
+#define memcpy_toio(c, a, l) memcpy((c), (a), (l))
+
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_BMP_16BPP
+#define CONFIG_BMP_24BPP
+#define CONFIG_BMP_32BPP
+
+#endif /* _STARFIVE_EVB_H */
+
Index: StarFive/u-boot/create-2021.10-3.8.2-vf2-defconfig-patch/create.patch.sh
===================================================================
--- StarFive/u-boot/create-2021.10-3.8.2-vf2-defconfig-patch/create.patch.sh (nonexistent)
+++ StarFive/u-boot/create-2021.10-3.8.2-vf2-defconfig-patch/create.patch.sh (revision 385)
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+VERSION=2021.10-3.8.2
+
+tar --files-from=file.list -xJvf ../u-boot-$VERSION.tar.xz
+mv u-boot-$VERSION u-boot-$VERSION-orig
+
+cp -rf ./u-boot-$VERSION-new ./u-boot-$VERSION
+
+diff --unified -Nr u-boot-$VERSION-orig u-boot-$VERSION > u-boot-$VERSION-vf2-defconfig.patch
+
+mv u-boot-$VERSION-vf2-defconfig.patch ../patches
+
+rm -rf ./u-boot-$VERSION
+rm -rf ./u-boot-$VERSION-orig
Property changes on: StarFive/u-boot/create-2021.10-3.8.2-vf2-defconfig-patch/create.patch.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: StarFive/u-boot/create-2021.10-3.8.2-vf2-defconfig-patch/file.list
===================================================================
--- StarFive/u-boot/create-2021.10-3.8.2-vf2-defconfig-patch/file.list (nonexistent)
+++ StarFive/u-boot/create-2021.10-3.8.2-vf2-defconfig-patch/file.list (revision 385)
@@ -0,0 +1 @@
+u-boot-2021.10-3.8.2/configs/starfive_visionfive2_defconfig
Index: StarFive/u-boot/create-2021.10-3.8.2-vf2-defconfig-patch/u-boot-2021.10-3.8.2-new/configs/starfive_visionfive2_defconfig
===================================================================
--- StarFive/u-boot/create-2021.10-3.8.2-vf2-defconfig-patch/u-boot-2021.10-3.8.2-new/configs/starfive_visionfive2_defconfig (nonexistent)
+++ StarFive/u-boot/create-2021.10-3.8.2-vf2-defconfig-patch/u-boot-2021.10-3.8.2-new/configs/starfive_visionfive2_defconfig (revision 385)
@@ -0,0 +1,169 @@
+CONFIG_RISCV=y
+CONFIG_SYS_MALLOC_F_LEN=0x10000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0xF0000
+CONFIG_SPL_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="starfive_visionfive2"
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_BUILD_TARGET=""
+CONFIG_TARGET_STARFIVE_VISIONFIVE2=y
+CONFIG_SPL_OPENSBI_LOAD_ADDR=0x40000000
+CONFIG_NR_CPUS=5
+CONFIG_FPGA_GMAC_SPEED_AUTO=y
+CONFIG_STARFIVE_JH7110_L2CC_FLUSH=y
+CONFIG_ARCH_RV64I=y
+CONFIG_CMODEL_MEDANY=y
+CONFIG_RISCV_SMODE=y
+CONFIG_SHOW_REGS=y
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_SPL_FIT_SOURCE="jh7110-uboot-fit-image.its"
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_QSPI_BOOT=y
+CONFIG_SD_BOOT=y
+CONFIG_SPI_BOOT=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=tty1 console=ttyS0,115200 debug rootwait earlycon=sbi"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run distro_bootcmd"
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="run chipa_set_uboot;"
+CONFIG_DEFAULT_FDT_FILE="starfive/jh7110-visionfive-v2.dtb"
+CONFIG_LOG_MAX_LEVEL=4
+CONFIG_SPL_LOG=y
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_DISPLAY_BOARDINFO=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_MISC_INIT_R=y
+CONFIG_ID_EEPROM=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x2
+CONFIG_SPL_I2C=y
+CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_DM_RESET=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="VisionFive2 # "
+CONFIG_CMD_CONFIG=y
+CONFIG_CMD_SBI=y
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_NVEDIT_EFI=y
+CONFIG_CMD_EEPROM=y
+CONFIG_SYS_EEPROM_SIZE=512
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
+CONFIG_CMD_GPT_RENAME=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MISC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_EFIDEBUG=y
+CONFIG_CMD_SYSBOOT=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FS_UUID=y
+CONFIG_CMD_LOG=y
+CONFIG_OF_EMBED=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_CLK_COMPOSITE_CCF=y
+CONFIG_CLK_CCF=y
+CONFIG_CLK_COMPOSITE_CCF=y
+CONFIG_SPL_CLK_JH7110=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x60000000
+CONFIG_FASTBOOT_BUF_SIZE=0x80000000
+CONFIG_FASTBOOT_USB_DEV=1
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_UUU_SUPPORT=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y
+CONFIG_FASTBOOT_MMC_USER_SUPPORT=y
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_FASTBOOT_STARFIVE_MAX_BLK_WRITE=8192
+CONFIG_SYS_I2C_DW=y
+CONFIG_SPL_SYS_I2C_DW=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SPL_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x50
+CONFIG_MMC_HS200_SUPPORT=y
+CONFIG_SPL_MMC_HS200_SUPPORT=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_SNPS=y
+CONFIG_SF_DEFAULT_MODE=0x0
+CONFIG_SF_DEFAULT_SPEED=100000000
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_PHY_MARVELL=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
+# CONFIG_PHY_MSCC is not set
+CONFIG_PHY_YUTAI=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_STARFIVE=y
+CONFIG_RGMII=y
+CONFIG_RTL8169=y
+CONFIG_NVME=y
+CONFIG_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCI_REGION_MULTI_ENTRY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL_STARFIVE=y
+CONFIG_PINCTRL_STARFIVE_JH7110=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_STARFIVE_POWER_DOMAIN=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_STARFIVE=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_STARFIVE=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+# CONFIG_RAM_SIFIVE is not set
+CONFIG_SPL_STARFIVE_DDR=y
+CONFIG_DM_RESET=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_SBI=y
+CONFIG_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_USB_CDNS3=y
+CONFIG_USB_CDNS3_GADGET=y
+# CONFIG_USB_CDNS3_TI is not set
+CONFIG_USB_CDNS3_STARFIVE=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VENDOR_NUM=0x18d1
+CONFIG_USB_GADGET_PRODUCT_NUM=0x0d02
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_PCI_DEFAULT_FB_SIZE=0x8000000
+CONFIG_VIDEO_COPY=y
+CONFIG_VIDEO_LCD_STARFIVE_SEEED=y
+CONFIG_DISPLAY=y
+CONFIG_NXP_TDA19988=y
+CONFIG_VIDEO_BRIDGE=y
+CONFIG_VIDEO_STARFIVE=y
+CONFIG_DISPLAY_STARFIVE_EDP=y
+CONFIG_DISPLAY_STARFIVE_LVDS=y
+CONFIG_DISPLAY_STARFIVE_HDMI=y
+CONFIG_DISPLAY_STARFIVE_MIPI=y
+CONFIG_VIDEO_NW_MIPI_DSI=y
+CONFIG_OF_LIBFDT_OVERLAY=y
Index: StarFive/u-boot/patches/README
===================================================================
--- StarFive/u-boot/patches/README (nonexistent)
+++ StarFive/u-boot/patches/README (revision 385)
@@ -0,0 +1,6 @@
+
+/* begin *
+
+ TODO: Leave some comment here.
+
+ * end */
Index: StarFive/u-boot/patches
===================================================================
--- StarFive/u-boot/patches (nonexistent)
+++ StarFive/u-boot/patches (revision 385)
Property changes on: StarFive/u-boot/patches
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: StarFive/u-boot
===================================================================
--- StarFive/u-boot (nonexistent)
+++ StarFive/u-boot (revision 385)
Property changes on: StarFive/u-boot
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: StarFive
===================================================================
--- StarFive (nonexistent)
+++ StarFive (revision 385)
Property changes on: StarFive
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: denx/Makefile
===================================================================
--- denx/Makefile (revision 384)
+++ denx/Makefile (revision 385)
@@ -7,15 +7,21 @@
url = $(DOWNLOAD_SERVER)/sources/U-Boot/denx
-versions = 2022.10
+versions = 2022.10 2023.04 2023.07
tarballs = $(addsuffix .tar.bz2, $(addprefix u-boot-, $(versions)))
sha1s = $(addsuffix .sha1sum, $(tarballs))
+patches = $(CURDIR)/patches/u-boot-2023.04-repka-pi3.patch
+patches += $(CURDIR)/patches/u-boot-2023.07-version.patch
+patches += $(CURDIR)/patches/u-boot-2023.07-orange-pi5.patch
-BUILD_TARGETS = $(tarballs) $(sha1s)
+.NOTPARALLEL: $(patches)
+BUILD_TARGETS = $(tarballs) $(sha1s) $(patches)
+
+
include ../../../build-system/core.mk
@@ -41,5 +47,12 @@
fi ; \
done
+$(patches): $(sha1s)
+ @echo -e "\n======= Create Patches =======\n" ; \
+ ( cd create-2023.04-repka-pi3-patch ; ./create.patch.sh ) ; \
+ ( cd create-2023.07-version-patch ; ./create.patch.sh ) ; \
+ ( cd create-2023.07-orange-pi5-patch ; ./create.patch.sh ) ; \
+ echo -e "\n"
+
download_clean:
- @rm -f $(tarballs) $(sha1s)
+ @rm -f $(tarballs) $(sha1s) $(patches)
Index: denx/create-2023.04-repka-pi3-patch/create.patch.sh
===================================================================
--- denx/create-2023.04-repka-pi3-patch/create.patch.sh (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/create.patch.sh (revision 385)
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+VERSION=2023.04
+
+tar --files-from=file.list -xjvf ../u-boot-$VERSION.tar.bz2
+mv u-boot-$VERSION u-boot-$VERSION-orig
+
+cp -rf ./u-boot-$VERSION-new ./u-boot-$VERSION
+
+diff --unified -Nr u-boot-$VERSION-orig u-boot-$VERSION > u-boot-$VERSION-repka-pi3.patch
+
+mv u-boot-$VERSION-repka-pi3.patch ../patches
+
+rm -rf ./u-boot-$VERSION
+rm -rf ./u-boot-$VERSION-orig
Property changes on: denx/create-2023.04-repka-pi3-patch/create.patch.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: denx/create-2023.04-repka-pi3-patch/file.list
===================================================================
--- denx/create-2023.04-repka-pi3-patch/file.list (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/file.list (revision 385)
@@ -0,0 +1,5 @@
+u-boot-2023.04/arch/arm/dts/Makefile
+u-boot-2023.04/arch/arm/dts/sun50i-h5-cpu-opp.dtsi
+u-boot-2023.04/arch/arm/dts/sun50i-h5.dtsi
+u-boot-2023.04/arch/arm/dts/sunxi-h3-h5.dtsi
+u-boot-2023.04/drivers/power/Kconfig
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/Makefile
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/Makefile (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/Makefile (revision 385)
@@ -0,0 +1,1401 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+dtb-$(CONFIG_TARGET_SMARTWEB) += at91sam9260-smartweb.dtb
+dtb-$(CONFIG_TARGET_TAURUS) += at91sam9g20-taurus.dtb
+dtb-$(CONFIG_TARGET_CORVUS) += at91sam9g45-corvus.dtb
+dtb-$(CONFIG_TARGET_GURNARD) += at91sam9g45-gurnard.dtb
+
+dtb-$(CONFIG_TARGET_SMDKC100) += s5pc1xx-smdkc100.dtb
+dtb-$(CONFIG_TARGET_S5P_GONI) += s5pc1xx-goni.dtb
+dtb-$(CONFIG_ARCH_EXYNOS4) += exynos4210-origen.dtb \
+ exynos4210-smdkv310.dtb \
+ exynos4210-universal_c210.dtb \
+ exynos4210-trats.dtb \
+ exynos4412-trats2.dtb \
+ exynos4412-odroid.dtb
+
+dtb-$(CONFIG_TARGET_HIKEY) += hi6220-hikey.dtb
+dtb-$(CONFIG_TARGET_HIKEY960) += hi3660-hikey960.dtb
+
+dtb-$(CONFIG_TARGET_POPLAR) += hi3798cv200-poplar.dtb
+
+dtb-$(CONFIG_ARCH_EXYNOS5) += exynos5250-arndale.dtb \
+ exynos5250-snow.dtb \
+ exynos5250-spring.dtb \
+ exynos5250-smdk5250.dtb \
+ exynos5420-smdk5420.dtb \
+ exynos5420-peach-pit.dtb \
+ exynos5800-peach-pi.dtb \
+ exynos5422-odroidxu3.dtb
+dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb
+dtb-$(CONFIG_TARGET_A5Y17LTE) += exynos78x0-axy17lte.dtb
+dtb-$(CONFIG_TARGET_A3Y17LTE) += exynos78x0-axy17lte.dtb
+dtb-$(CONFIG_TARGET_A7Y17LTE) += exynos78x0-axy17lte.dtb
+
+dtb-$(CONFIG_ARCH_APPLE) += \
+ t8103-j274.dtb \
+ t8103-j293.dtb \
+ t8103-j313.dtb \
+ t8103-j456.dtb \
+ t8103-j457.dtb
+
+dtb-$(CONFIG_ARCH_DAVINCI) += \
+ da850-evm.dtb \
+ da850-lcdk.dtb \
+ da850-lego-ev3.dtb
+
+dtb-$(CONFIG_ARCH_KIRKWOOD) += \
+ kirkwood-atl-sbx81lifkw.dtb \
+ kirkwood-atl-sbx81lifxcat.dtb \
+ kirkwood-blackarmor-nas220.dtb \
+ kirkwood-d2net.dtb \
+ kirkwood-dns325.dtb \
+ kirkwood-dockstar.dtb \
+ kirkwood-dreamplug.dtb \
+ kirkwood-ds109.dtb \
+ kirkwood-goflexnet.dtb \
+ kirkwood-guruplug-server-plus.dtb \
+ kirkwood-ib62x0.dtb \
+ kirkwood-iconnect.dtb \
+ kirkwood-is2.dtb \
+ kirkwood-lsxhl.dtb \
+ kirkwood-lschlv2.dtb \
+ kirkwood-net2big.dtb \
+ kirkwood-ns2.dtb \
+ kirkwood-ns2lite.dtb \
+ kirkwood-ns2max.dtb \
+ kirkwood-ns2mini.dtb \
+ kirkwood-nsa310s.dtb \
+ kirkwood-openrd-base.dtb \
+ kirkwood-openrd-client.dtb \
+ kirkwood-openrd-ultimate.dtb \
+ kirkwood-pogo_e02.dtb \
+ kirkwood-pogoplug-series-4.dtb \
+ kirkwood-sheevaplug.dtb
+
+dtb-$(CONFIG_MACH_S900) += \
+ bubblegum_96.dtb
+dtb-$(CONFIG_MACH_S700) += \
+ s700-cubieboard7.dtb
+
+dtb-$(CONFIG_ROCKCHIP_PX30) += \
+ px30-evb.dtb \
+ px30-firefly.dtb \
+ px30-engicam-px30-core-ctouch2.dtb \
+ px30-engicam-px30-core-ctouch2-of10.dtb \
+ px30-engicam-px30-core-edimm2.2.dtb \
+ rk3326-odroid-go2.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3036) += \
+ rk3036-sdk.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3066) += \
+ rk3066a-mk808.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3128) += \
+ rk3128-evb.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3188) += \
+ rk3188-radxarock.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK322X) += \
+ rk3229-evb.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3288) += \
+ rk3288-evb.dtb \
+ rk3288-firefly.dtb \
+ rk3288-miqi.dtb \
+ rk3288-phycore-rdk.dtb \
+ rk3288-popmetal.dtb \
+ rk3288-rock2-square.dtb \
+ rk3288-rock-pi-n8.dtb \
+ rk3288-tinker.dtb \
+ rk3288-tinker-s.dtb \
+ rk3288-veyron-jerry.dtb \
+ rk3288-veyron-mickey.dtb \
+ rk3288-veyron-minnie.dtb \
+ rk3288-veyron-speedy.dtb \
+ rk3288-vyasa.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3308) += \
+ rk3308-evb.dtb \
+ rk3308-roc-cc.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3328) += \
+ rk3328-evb.dtb \
+ rk3328-nanopi-r2s.dtb \
+ rk3328-roc-cc.dtb \
+ rk3328-rock64.dtb \
+ rk3328-rock-pi-e.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3368) += \
+ rk3368-lion-haikou.dtb \
+ rk3368-sheep.dtb \
+ rk3368-geekbox.dtb \
+ rk3368-px5-evb.dtb \
+
+dtb-$(CONFIG_ROCKCHIP_RK3399) += \
+ rk3399-evb.dtb \
+ rk3399-eaidk-610.dtb \
+ rk3399-ficus.dtb \
+ rk3399-firefly.dtb \
+ rk3399-gru-bob.dtb \
+ rk3399-gru-kevin.dtb \
+ rk3399-khadas-edge.dtb \
+ rk3399-khadas-edge-captain.dtb \
+ rk3399-khadas-edge-v.dtb \
+ rk3399-leez-p710.dtb \
+ rk3399-nanopc-t4.dtb \
+ rk3399-nanopi-m4.dtb \
+ rk3399-nanopi-m4-2gb.dtb \
+ rk3399-nanopi-m4b.dtb \
+ rk3399-nanopi-neo4.dtb \
+ rk3399-nanopi-r4s.dtb \
+ rk3399-orangepi.dtb \
+ rk3399-pinebook-pro.dtb \
+ rk3399-pinephone-pro.dtb \
+ rk3399-puma-haikou.dtb \
+ rk3399-roc-pc.dtb \
+ rk3399-roc-pc-mezzanine.dtb \
+ rk3399-rock-pi-4a.dtb \
+ rk3399-rock-pi-4b.dtb \
+ rk3399-rock-pi-4c.dtb \
+ rk3399-rock960.dtb \
+ rk3399-rockpro64.dtb \
+ rk3399pro-rock-pi-n10.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3568) += \
+ rk3568-evb.dtb \
+ rk3566-radxa-cm3-io.dtb \
+ rk3568-rock-3a.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3588) += \
+ rk3588-edgeble-neu6a-io.dtb \
+ rk3588-rock-5b.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RV1108) += \
+ rv1108-elgin-r1.dtb \
+ rv1108-evb.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RV1126) += \
+ rv1126-edgeble-neu2-io.dtb
+
+dtb-$(CONFIG_ARCH_S5P4418) += \
+ s5p4418-nanopi2.dtb
+
+dtb-$(CONFIG_ARCH_MESON) += \
+ meson-axg-s400.dtb \
+ meson-axg-jethome-jethub-j100.dtb \
+ meson-gxbb-nanopi-k2.dtb \
+ meson-gxbb-odroidc2.dtb \
+ meson-gxbb-nanopi-k2.dtb \
+ meson-gxbb-p200.dtb \
+ meson-gxbb-p201.dtb \
+ meson-gxl-s805x-libretech-ac.dtb \
+ meson-gxl-s905d-libretech-pc.dtb \
+ meson-gxl-s905w-jethome-jethub-j80.dtb \
+ meson-gxl-s905x-khadas-vim.dtb \
+ meson-gxl-s905x-libretech-cc.dtb \
+ meson-gxl-s905x-libretech-cc-v2.dtb \
+ meson-gxl-s905x-p212.dtb \
+ meson-gxm-khadas-vim2.dtb \
+ meson-gxm-s912-libretech-pc.dtb \
+ meson-gxm-wetek-core2.dtb \
+ meson-g12a-radxa-zero.dtb \
+ meson-g12a-sei510.dtb \
+ meson-g12a-u200.dtb \
+ meson-g12b-a311d-khadas-vim3.dtb \
+ meson-g12b-gtking.dtb \
+ meson-g12b-gtking-pro.dtb \
+ meson-g12b-gsking-x.dtb \
+ meson-g12b-odroid-go-ultra.dtb \
+ meson-g12b-odroid-n2.dtb \
+ meson-g12b-odroid-n2l.dtb \
+ meson-g12b-odroid-n2-plus.dtb \
+ meson-sm1-bananapi-m5.dtb \
+ meson-sm1-khadas-vim3l.dtb \
+ meson-sm1-odroid-c4.dtb \
+ meson-sm1-odroid-hc4.dtb \
+ meson-sm1-sei610.dtb
+dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
+ tegra20-medcom-wide.dtb \
+ tegra20-paz00.dtb \
+ tegra20-plutux.dtb \
+ tegra20-seaboard.dtb \
+ tegra20-tec.dtb \
+ tegra20-trimslice.dtb \
+ tegra20-ventana.dtb \
+ tegra20-colibri.dtb \
+ tegra30-apalis.dtb \
+ tegra30-beaver.dtb \
+ tegra30-cardhu.dtb \
+ tegra30-colibri.dtb \
+ tegra30-tec-ng.dtb \
+ tegra114-dalmore.dtb \
+ tegra124-apalis.dtb \
+ tegra124-jetson-tk1.dtb \
+ tegra124-nyan-big.dtb \
+ tegra124-cei-tk1-som.dtb \
+ tegra124-venice2.dtb \
+ tegra186-p2771-0000-000.dtb \
+ tegra186-p2771-0000-500.dtb \
+ tegra210-p2371-0000.dtb \
+ tegra210-p2371-2180.dtb \
+ tegra210-p2571.dtb \
+ tegra210-p3450-0000.dtb
+
+ifdef CONFIG_ARMADA_32BIT
+ifdef CONFIG_ARMADA_375
+dtb-$(CONFIG_ARCH_MVEBU) += \
+ armada-375-db.dtb
+else
+dtb-$(CONFIG_ARCH_MVEBU) += \
+ armada-385-atl-x530.dtb \
+ armada-385-atl-x530DP.dtb \
+ armada-385-db-88f6820-amc.dtb \
+ armada-385-synology-ds116.dtb \
+ armada-385-thecus-n2350.dtb \
+ armada-385-turris-omnia.dtb \
+ armada-388-clearfog.dtb \
+ armada-388-gp.dtb \
+ armada-388-helios4.dtb \
+ armada-38x-controlcenterdc.dtb \
+ armada-xp-crs305-1g-4s.dtb \
+ armada-xp-crs305-1g-4s-bit.dtb \
+ armada-xp-crs326-24g-2s.dtb \
+ armada-xp-crs326-24g-2s-bit.dtb \
+ armada-xp-crs328-4c-20s-4s.dtb \
+ armada-xp-crs328-4c-20s-4s-bit.dtb \
+ armada-xp-db-xc3-24g4xg.dtb \
+ armada-xp-gp.dtb \
+ armada-xp-maxbcm.dtb \
+ armada-xp-synology-ds414.dtb \
+ armada-xp-theadorable.dtb
+endif
+else
+dtb-$(CONFIG_ARCH_MVEBU) += \
+ armada-3720-db.dtb \
+ armada-3720-espressobin.dtb \
+ armada-3720-turris-mox.dtb \
+ armada-3720-eDPU.dtb \
+ armada-3720-uDPU.dtb \
+ armada-7040-db-nand.dtb \
+ armada-7040-db.dtb \
+ armada-8040-clearfog-gt-8k.dtb \
+ armada-8040-db.dtb \
+ armada-8040-mcbin.dtb \
+ armada-8040-puzzle-m801.dtb \
+ cn9130-db-A.dtb \
+ cn9130-db-B.dtb \
+ cn9131-db-A.dtb \
+ cn9131-db-B.dtb \
+ cn9132-db-A.dtb \
+ cn9132-db-B.dtb \
+ cn9130-crb-A.dtb \
+ cn9130-crb-B.dtb \
+ ac5-98dx35xx-rd.dtb
+endif
+
+dtb-$(CONFIG_ARCH_SYNQUACER) += synquacer-sc2a11-developerbox.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_LD11) += \
+ uniphier-ld11-global.dtb \
+ uniphier-ld11-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_LD20) += \
+ uniphier-ld20-akebi96.dtb \
+ uniphier-ld20-global.dtb \
+ uniphier-ld20-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_LD4) += \
+ uniphier-ld4-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_LD6B) += \
+ uniphier-ld6b-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_PRO4) += \
+ uniphier-pro4-ace.dtb \
+ uniphier-pro4-ref.dtb \
+ uniphier-pro4-sanji.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_PRO5) += \
+ uniphier-pro5-4kbox.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_PXS2) += \
+ uniphier-pxs2-gentil.dtb \
+ uniphier-pxs2-vodka.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_PXS3) += \
+ uniphier-pxs3-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_SLD8) += \
+ uniphier-sld8-ref.dtb
+
+dtb-$(CONFIG_ARCH_ZYNQ) += \
+ bitmain-antminer-s9.dtb \
+ zynq-cc108.dtb \
+ zynq-cse-nand.dtb \
+ zynq-cse-nor.dtb \
+ zynq-cse-qspi-single.dtb \
+ zynq-dlc20-rev1.0.dtb \
+ zynq-microzed.dtb \
+ zynq-minized.dtb \
+ zynq-picozed.dtb \
+ zynq-syzygy-hub.dtb \
+ zynq-topic-miami.dtb \
+ zynq-topic-miamilite.dtb \
+ zynq-topic-miamiplus.dtb \
+ zynq-zc702.dtb \
+ zynq-zc706.dtb \
+ zynq-zc770-xm010.dtb \
+ zynq-zc770-xm011.dtb \
+ zynq-zc770-xm011-x16.dtb \
+ zynq-zc770-xm012.dtb \
+ zynq-zc770-xm013.dtb \
+ zynq-zed.dtb \
+ zynq-zturn.dtb \
+ zynq-zturn-v5.dtb \
+ zynq-zybo.dtb \
+ zynq-zybo-z7.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += \
+ avnet-ultra96-rev1.dtb \
+ zynqmp-a2197-revA.dtb \
+ zynqmp-dlc21-revA.dtb \
+ zynqmp-e-a2197-00-revA.dtb \
+ zynqmp-g-a2197-00-revA.dtb \
+ zynqmp-m-a2197-01-revA.dtb \
+ zynqmp-m-a2197-02-revA.dtb \
+ zynqmp-m-a2197-03-revA.dtb \
+ zynqmp-p-a2197-00-revA.dtb \
+ zynqmp-mini.dtb \
+ zynqmp-mini-emmc0.dtb \
+ zynqmp-mini-emmc1.dtb \
+ zynqmp-mini-nand.dtb \
+ zynqmp-mini-qspi.dtb \
+ zynqmp-sm-k24-revA.dtb \
+ zynqmp-smk-k24-revA.dtb \
+ zynqmp-sm-k26-revA.dtb \
+ zynqmp-smk-k26-revA.dtb \
+ zynqmp-sck-kr-g-revA.dtbo \
+ zynqmp-sck-kr-g-revB.dtbo \
+ zynqmp-sck-kv-g-revA.dtbo \
+ zynqmp-sck-kv-g-revB.dtbo \
+ zynqmp-topic-miamimp-xilinx-xdp-v1r1.dtb \
+ zynqmp-zcu100-revC.dtb \
+ zynqmp-zcu102-revA.dtb \
+ zynqmp-zcu102-revB.dtb \
+ zynqmp-zcu102-rev1.0.dtb \
+ zynqmp-zcu102-rev1.1.dtb \
+ zynqmp-zcu104-revA.dtb \
+ zynqmp-zcu104-revC.dtb \
+ zynqmp-zcu106-revA.dtb \
+ zynqmp-zcu106-rev1.0.dtb \
+ zynqmp-zcu111-revA.dtb \
+ zynqmp-zcu1275-revA.dtb \
+ zynqmp-zcu1275-revB.dtb \
+ zynqmp-zcu1285-revA.dtb \
+ zynqmp-zcu208-revA.dtb \
+ zynqmp-zcu216-revA.dtb \
+ zynqmp-zc1232-revA.dtb \
+ zynqmp-zc1254-revA.dtb \
+ zynqmp-zc1751-xm015-dc1.dtb \
+ zynqmp-zc1751-xm016-dc2.dtb \
+ zynqmp-zc1751-xm017-dc3.dtb \
+ zynqmp-zc1751-xm018-dc4.dtb \
+ zynqmp-zc1751-xm019-dc5.dtb
+dtb-$(CONFIG_ARCH_VERSAL) += \
+ versal-mini.dtb \
+ versal-mini-emmc0.dtb \
+ versal-mini-emmc1.dtb \
+ versal-mini-ospi-single.dtb \
+ versal-mini-qspi-single.dtb \
+ xilinx-versal-virt.dtb
+dtb-$(CONFIG_ARCH_VERSAL_NET) += \
+ versal-net-mini.dtb \
+ xilinx-versal-net-virt.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP_R5) += \
+ zynqmp-r5.dtb
+dtb-$(CONFIG_AM33XX) += \
+ am335x-baltos.dtb \
+ am335x-bone.dtb \
+ am335x-boneblack.dtb \
+ am335x-boneblack-wireless.dtb \
+ am335x-boneblue.dtb \
+ am335x-brppt1-mmc.dtb \
+ am335x-brxre1.dtb \
+ am335x-brsmarc1.dtb \
+ am335x-draco.dtb \
+ am335x-evm.dtb \
+ am335x-evmsk.dtb \
+ am335x-bonegreen.dtb \
+ am335x-bonegreen-wireless.dtb \
+ am335x-icev2.dtb \
+ am335x-pocketbeagle.dtb \
+ am335x-pxm50.dtb \
+ am335x-rut.dtb \
+ am335x-sancloud-bbe.dtb \
+ am335x-sancloud-bbe-lite.dtb \
+ am335x-sancloud-bbe-extended-wifi.dtb \
+ am335x-shc.dtb \
+ am335x-pdu001.dtb \
+ am335x-chiliboard.dtb \
+ am335x-sl50.dtb \
+ am335x-base0033.dtb \
+ am335x-guardian.dtb \
+ am335x-wega-rdk.dtb \
+ am335x-regor-rdk.dtb
+dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb \
+ am43x-epos-evm.dtb \
+ am437x-idk-evm.dtb \
+ am4372-generic.dtb \
+ am437x-cm-t43.dtb
+dtb-$(CONFIG_TARGET_AM3517_EVM) += am3517-evm.dtb
+dtb-$(CONFIG_TI816X) += dm8168-evm.dtb
+dtb-$(CONFIG_TARGET_THUNDERX_88XX) += thunderx-88xx.dtb
+
+dtb-$(CONFIG_ARCH_SOCFPGA) += \
+ socfpga_agilex_socdk.dtb \
+ socfpga_arria5_secu1.dtb \
+ socfpga_arria5_socdk.dtb \
+ socfpga_arria10_chameleonv3_270_2.dtb \
+ socfpga_arria10_chameleonv3_270_3.dtb \
+ socfpga_arria10_chameleonv3_480_2.dtb \
+ socfpga_arria10_socdk_sdmmc.dtb \
+ socfpga_cyclone5_mcvevk.dtb \
+ socfpga_cyclone5_is1.dtb \
+ socfpga_cyclone5_socdk.dtb \
+ socfpga_cyclone5_dbm_soc1.dtb \
+ socfpga_cyclone5_de0_nano_soc.dtb \
+ socfpga_cyclone5_de1_soc.dtb \
+ socfpga_cyclone5_de10_nano.dtb \
+ socfpga_cyclone5_sockit.dtb \
+ socfpga_cyclone5_socrates.dtb \
+ socfpga_cyclone5_sr1500.dtb \
+ socfpga_cyclone5_vining_fpga.dtb \
+ socfpga_n5x_socdk.dtb \
+ socfpga_stratix10_socdk.dtb
+
+dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dra7-evm.dtb \
+ dra72-evm-revc.dtb dra71-evm.dtb dra76-evm.dtb
+dtb-$(CONFIG_TARGET_AM57XX_EVM) += am57xx-beagle-x15.dtb \
+ am57xx-beagle-x15-revb1.dtb \
+ am57xx-beagle-x15-revc.dtb \
+ am5729-beagleboneai.dtb \
+ am574x-idk.dtb \
+ am572x-idk.dtb \
+ am571x-idk.dtb
+dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
+
+dtb-$(CONFIG_ARCH_LS1021A) += ls1021a-qds-duart.dtb \
+ ls1021a-qds-lpuart.dtb \
+ ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb \
+ ls1021a-iot-duart.dtb ls1021a-tsn.dtb
+dtb-$(CONFIG_TARGET_PG_WCOM_SELI8) += ls1021a-pg-wcom-seli8.dtb
+dtb-$(CONFIG_TARGET_PG_WCOM_EXPU1) += ls1021a-pg-wcom-expu1.dtb
+
+dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
+ fsl-ls2080a-qds-42-x.dtb \
+ fsl-ls2080a-rdb.dtb \
+ fsl-ls2081a-rdb.dtb \
+ fsl-ls2088a-rdb-qspi.dtb \
+ fsl-ls1088a-rdb.dtb \
+ fsl-ls1088a-qds.dtb \
+ fsl-ls1088a-qds-21-x.dtb \
+ fsl-ls1088a-qds-29-x.dtb \
+ fsl-ls1028a-rdb.dtb \
+ fsl-ls1028a-qds-duart.dtb \
+ fsl-ls1028a-qds-lpuart.dtb \
+ fsl-lx2160a-rdb.dtb \
+ fsl-lx2160a-qds.dtb \
+ fsl-lx2160a-qds-3-x-x.dtb \
+ fsl-lx2160a-qds-3-11-x.dtb \
+ fsl-lx2160a-qds-7-x-x.dtb \
+ fsl-lx2160a-qds-7-11-x.dtb \
+ fsl-lx2160a-qds-19-x-x.dtb \
+ fsl-lx2160a-qds-19-11-x.dtb \
+ fsl-lx2160a-qds-20-x-x.dtb \
+ fsl-lx2160a-qds-20-11-x.dtb \
+ fsl-lx2162a-qds.dtb\
+ fsl-lx2162a-qds-17-x.dtb\
+ fsl-lx2162a-qds-18-x.dtb\
+ fsl-lx2162a-qds-20-x.dtb
+dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
+ fsl-ls1043a-qds-lpuart.dtb \
+ fsl-ls1043a-rdb.dtb \
+ fsl-ls1046a-qds-duart.dtb \
+ fsl-ls1046a-qds-lpuart.dtb \
+ fsl-ls1046a-rdb.dtb \
+ fsl-ls1046a-frwy.dtb \
+ fsl-ls1012a-qds.dtb \
+ fsl-ls1012a-rdb.dtb \
+ fsl-ls1012a-2g5rdb.dtb \
+ fsl-ls1012a-frdm.dtb \
+ fsl-ls1012a-frwy.dtb
+dtb-$(CONFIG_TARGET_SL28) += fsl-ls1028a-kontron-sl28.dtb \
+ fsl-ls1028a-kontron-sl28-var1.dtb \
+ fsl-ls1028a-kontron-sl28-var2.dtb \
+ fsl-ls1028a-kontron-sl28-var3.dtb \
+ fsl-ls1028a-kontron-sl28-var4.dtb \
+
+dtb-$(CONFIG_TARGET_TEN64) += fsl-ls1088a-ten64.dtb
+
+dtb-$(CONFIG_TARGET_DRAGONBOARD410C) += dragonboard410c.dtb
+dtb-$(CONFIG_TARGET_DRAGONBOARD820C) += dragonboard820c.dtb
+dtb-$(CONFIG_TARGET_STARQLTECHN) += starqltechn.dtb
+dtb-$(CONFIG_TARGET_QCS404EVB) += qcs404-evb.dtb
+
+dtb-$(CONFIG_TARGET_STEMMY) += ste-ux500-samsung-stemmy.dtb
+
+dtb-$(CONFIG_STM32F4) += stm32f429-disco.dtb \
+ stm32429i-eval.dtb \
+ stm32f469-disco.dtb
+
+dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb \
+ stm32f769-disco.dtb \
+ stm32746g-eval.dtb
+dtb-$(CONFIG_STM32H7) += stm32h743i-disco.dtb \
+ stm32h743i-eval.dtb \
+ stm32h750i-art-pi.dtb
+
+dtb-$(CONFIG_MACH_SUNIV) += \
+ suniv-f1c100s-licheepi-nano.dtb
+dtb-$(CONFIG_MACH_SUN4I) += \
+ sun4i-a10-a1000.dtb \
+ sun4i-a10-ba10-tvbox.dtb \
+ sun4i-a10-chuwi-v7-cw0825.dtb \
+ sun4i-a10-cubieboard.dtb \
+ sun4i-a10-dserve-dsrv9703c.dtb \
+ sun4i-a10-gemei-g9.dtb \
+ sun4i-a10-hackberry.dtb \
+ sun4i-a10-hyundai-a7hd.dtb \
+ sun4i-a10-inet1.dtb \
+ sun4i-a10-inet-3f.dtb \
+ sun4i-a10-inet-3w.dtb \
+ sun4i-a10-inet97fv2.dtb \
+ sun4i-a10-inet9f-rev03.dtb \
+ sun4i-a10-itead-iteaduino-plus.dtb \
+ sun4i-a10-jesurun-q5.dtb \
+ sun4i-a10-marsboard.dtb \
+ sun4i-a10-mini-xplus.dtb \
+ sun4i-a10-mk802.dtb \
+ sun4i-a10-mk802ii.dtb \
+ sun4i-a10-olinuxino-lime.dtb \
+ sun4i-a10-pcduino.dtb \
+ sun4i-a10-pcduino2.dtb \
+ sun4i-a10-pov-protab2-ips9.dtb \
+ sun4i-a10-topwise-a721.dtb
+dtb-$(CONFIG_MACH_SUN5I) += \
+ sun5i-a10s-auxtek-t003.dtb \
+ sun5i-a10s-auxtek-t004.dtb \
+ sun5i-a10s-mk802.dtb \
+ sun5i-a10s-olinuxino-micro.dtb \
+ sun5i-a10s-r7-tv-dongle.dtb \
+ sun5i-a10s-wobo-i5.dtb \
+ sun5i-a13-ampe-a76.dtb \
+ sun5i-a13-difrnce-dit4350.dtb \
+ sun5i-a13-empire-electronix-d709.dtb \
+ sun5i-a13-empire-electronix-m712.dtb \
+ sun5i-a13-hsg-h702.dtb \
+ sun5i-a13-inet-86vs.dtb \
+ sun5i-a13-inet-98v-rev2.dtb \
+ sun5i-a13-licheepi-one.dtb \
+ sun5i-a13-olinuxino.dtb \
+ sun5i-a13-olinuxino-micro.dtb \
+ sun5i-a13-pocketbook-touch-lux-3.dtb \
+ sun5i-a13-q8-tablet.dtb \
+ sun5i-a13-utoo-p66.dtb \
+ sun5i-gr8-chip-pro.dtb \
+ sun5i-gr8-evb.dtb \
+ sun5i-r8-chip.dtb
+dtb-$(CONFIG_MACH_SUN6I) += \
+ sun6i-a31-app4-evb1.dtb \
+ sun6i-a31-colombus.dtb \
+ sun6i-a31-hummingbird.dtb \
+ sun6i-a31-i7.dtb \
+ sun6i-a31-m9.dtb \
+ sun6i-a31-mele-a1000g-quad.dtb \
+ sun6i-a31-mixtile-loftq.dtb \
+ sun6i-a31s-colorfly-e708-q1.dtb \
+ sun6i-a31s-cs908.dtb \
+ sun6i-a31s-inet-q972.dtb \
+ sun6i-a31s-primo81.dtb \
+ sun6i-a31s-sina31s.dtb \
+ sun6i-a31s-sinovoip-bpi-m2.dtb \
+ sun6i-a31s-yones-toptech-bs1078-v2.dtb
+dtb-$(CONFIG_MACH_SUN7I) += \
+ sun7i-a20-ainol-aw1.dtb \
+ sun7i-a20-bananapi.dtb \
+ sun7i-a20-bananapi-m1-plus.dtb \
+ sun7i-a20-bananapro.dtb \
+ sun7i-a20-cubieboard2.dtb \
+ sun7i-a20-cubietruck.dtb \
+ sun7i-a20-haoyu-marsboard.dtb \
+ sun7i-a20-hummingbird.dtb \
+ sun7i-a20-i12-tvbox.dtb \
+ sun7i-a20-icnova-swac.dtb \
+ sun7i-a20-itead-ibox.dtb \
+ sun7i-a20-lamobo-r1.dtb \
+ sun7i-a20-linutronix-testbox-v2.dtb \
+ sun7i-a20-m3.dtb \
+ sun7i-a20-m5.dtb \
+ sun7i-a20-mk808c.dtb \
+ sun7i-a20-olimex-som-evb.dtb \
+ sun7i-a20-olimex-som204-evb.dtb \
+ sun7i-a20-olimex-som204-evb-emmc.dtb \
+ sun7i-a20-olinuxino-lime.dtb \
+ sun7i-a20-olinuxino-lime-emmc.dtb \
+ sun7i-a20-olinuxino-lime2.dtb \
+ sun7i-a20-olinuxino-lime2-emmc.dtb \
+ sun7i-a20-olinuxino-micro.dtb \
+ sun7i-a20-olinuxino-micro-emmc.dtb \
+ sun7i-a20-orangepi.dtb \
+ sun7i-a20-orangepi-mini.dtb \
+ sun7i-a20-pcduino3.dtb \
+ sun7i-a20-pcduino3-nano.dtb \
+ sun7i-a20-primo73.dtb \
+ sun7i-a20-wexler-tab7200.dtb \
+ sun7i-a20-wits-pro-a20-dkt.dtb \
+ sun7i-a20-yones-toptech-bd1078.dtb
+dtb-$(CONFIG_MACH_SUN8I_A23) += \
+ sun8i-a23-evb.dtb \
+ sun8i-a23-gt90h-v4.dtb \
+ sun8i-a23-inet86dz.dtb \
+ sun8i-a23-ippo-q8h-v1.2.dtb \
+ sun8i-a23-ippo-q8h-v5.dtb \
+ sun8i-a23-polaroid-mid2407pxe03.dtb \
+ sun8i-a23-polaroid-mid2809pxe04.dtb \
+ sun8i-a23-q8-tablet.dtb
+dtb-$(CONFIG_MACH_SUN8I_A33) += \
+ sun8i-a33-et-q8-v1.6.dtb \
+ sun8i-a33-ga10h-v1.1.dtb \
+ sun8i-a33-inet-d978-rev2.dtb \
+ sun8i-a33-ippo-q8h-v1.2.dtb \
+ sun8i-a33-olinuxino.dtb \
+ sun8i-a33-q8-tablet.dtb \
+ sun8i-a33-sinlinx-sina33.dtb \
+ sun8i-r16-bananapi-m2m.dtb \
+ sun8i-r16-nintendo-nes-classic.dtb \
+ sun8i-r16-nintendo-super-nes-classic.dtb \
+ sun8i-r16-parrot.dtb
+dtb-$(CONFIG_MACH_SUN8I_A83T) += \
+ sun8i-a83t-allwinner-h8homlet-v2.dtb \
+ sun8i-a83t-bananapi-m3.dtb \
+ sun8i-a83t-cubietruck-plus.dtb \
+ sun8i-a83t-tbs-a711.dtb
+dtb-$(CONFIG_MACH_SUN8I_H3) += \
+ sun8i-h2-plus-bananapi-m2-zero.dtb \
+ sun8i-h2-plus-libretech-all-h3-cc.dtb \
+ sun8i-h2-plus-orangepi-r1.dtb \
+ sun8i-h2-plus-orangepi-zero.dtb \
+ sun8i-h3-bananapi-m2-plus.dtb \
+ sun8i-h3-bananapi-m2-plus-v1.2.dtb \
+ sun8i-h3-beelink-x2.dtb \
+ sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
+ sun8i-h3-libretech-all-h3-cc.dtb \
+ sun8i-h3-mapleboard-mp130.dtb \
+ sun8i-h3-nanopi-duo2.dtb \
+ sun8i-h3-nanopi-m1.dtb \
+ sun8i-h3-nanopi-m1-plus.dtb \
+ sun8i-h3-nanopi-neo.dtb \
+ sun8i-h3-nanopi-neo-air.dtb \
+ sun8i-h3-nanopi-r1.dtb \
+ sun8i-h3-orangepi-2.dtb \
+ sun8i-h3-orangepi-lite.dtb \
+ sun8i-h3-orangepi-one.dtb \
+ sun8i-h3-orangepi-pc.dtb \
+ sun8i-h3-orangepi-pc-plus.dtb \
+ sun8i-h3-orangepi-plus.dtb \
+ sun8i-h3-orangepi-plus2e.dtb \
+ sun8i-h3-orangepi-zero-plus2.dtb \
+ sun8i-h3-rervision-dvk.dtb \
+ sun8i-h3-zeropi.dtb
+dtb-$(CONFIG_MACH_SUN8I_R40) += \
+ sun8i-r40-bananapi-m2-ultra.dtb \
+ sun8i-r40-oka40i-c.dtb \
+ sun8i-t3-cqa3t-bv3.dtb \
+ sun8i-v40-bananapi-m2-berry.dtb
+dtb-$(CONFIG_MACH_SUN8I_V3S) += \
+ sun8i-s3-elimo-initium.dtb \
+ sun8i-s3-pinecube.dtb \
+ sun8i-v3-sl631-imx179.dtb \
+ sun8i-v3s-licheepi-zero.dtb
+dtb-$(CONFIG_MACH_SUN50I_H5) += \
+ sun50i-h5-repka-pi3-1.0ghz.dtb \
+ sun50i-h5-repka-pi3-1.2ghz.dtb \
+ sun50i-h5-repka-pi3-1.4ghz.dtb \
+ sun50i-h5-repka-pi3-alt-1.0ghz.dtb \
+ sun50i-h5-repka-pi3-alt-1.2ghz.dtb \
+ sun50i-h5-repka-pi3-alt-1.4ghz.dtb \
+ sun50i-h5-repka-pi3-alt-uart-1.0ghz.dtb \
+ sun50i-h5-repka-pi3-alt-uart-1.2ghz.dtb \
+ sun50i-h5-repka-pi3-alt-uart-1.4ghz.dtb \
+ sun50i-h5-repka-pi3-alt-pwm-1.0ghz.dtb \
+ sun50i-h5-repka-pi3-alt-pwm-1.2ghz.dtb \
+ sun50i-h5-repka-pi3-alt-pwm-1.4ghz.dtb \
+ sun50i-h5-repka-pi3-alt-i2c2-1.0ghz.dtb \
+ sun50i-h5-repka-pi3-alt-i2c2-1.2ghz.dtb \
+ sun50i-h5-repka-pi3-alt-i2c2-1.4ghz.dtb \
+ sun50i-h5-repka-pi3-v1.4.dtb \
+ sun50i-h5-repka-pi3-v1.4p.dtb \
+ sun50i-h5-repka-pi3-alt-v1.4.dtb \
+ sun50i-h5-repka-pi3-alt-v1.4p.dtb \
+ sun50i-h5-repka-pi3-alt-uart-v1.4.dtb \
+ sun50i-h5-repka-pi3-alt-uart-v1.4p.dtb \
+ sun50i-h5-repka-pi3-alt-pwm-v1.4.dtb \
+ sun50i-h5-repka-pi3-alt-pwm-v1.4p.dtb \
+ sun50i-h5-repka-pi3-alt-i2c2-v1.4.dtb \
+ sun50i-h5-repka-pi3-alt-i2c2-v1.4p.dtb \
+ sun50i-h5-bananapi-m2-plus.dtb \
+ sun50i-h5-emlid-neutis-n5-devboard.dtb \
+ sun50i-h5-libretech-all-h3-cc.dtb \
+ sun50i-h5-libretech-all-h3-it.dtb \
+ sun50i-h5-libretech-all-h5-cc.dtb \
+ sun50i-h5-nanopi-neo2.dtb \
+ sun50i-h5-nanopi-neo-plus2.dtb \
+ sun50i-h5-nanopi-r1s-h5.dtb \
+ sun50i-h5-orangepi-zero-plus.dtb \
+ sun50i-h5-orangepi-pc2.dtb \
+ sun50i-h5-orangepi-prime.dtb \
+ sun50i-h5-orangepi-zero-plus2.dtb
+dtb-$(CONFIG_MACH_SUN50I_H6) += \
+ sun50i-h6-beelink-gs1.dtb \
+ sun50i-h6-orangepi-3.dtb \
+ sun50i-h6-orangepi-lite2.dtb \
+ sun50i-h6-orangepi-one-plus.dtb \
+ sun50i-h6-pine-h64.dtb \
+ sun50i-h6-pine-h64-model-b.dtb \
+ sun50i-h6-tanix-tx6.dtb \
+ sun50i-h6-tanix-tx6-mini.dtb
+dtb-$(CONFIG_MACH_SUN50I_H616) += \
+ sun50i-h616-orangepi-zero2.dtb \
+ sun50i-h616-x96-mate.dtb
+dtb-$(CONFIG_MACH_SUN50I) += \
+ sun50i-a64-amarula-relic.dtb \
+ sun50i-a64-bananapi-m64.dtb \
+ sun50i-a64-nanopi-a64.dtb \
+ sun50i-a64-oceanic-5205-5inmfd.dtb \
+ sun50i-a64-olinuxino.dtb \
+ sun50i-a64-olinuxino-emmc.dtb \
+ sun50i-a64-orangepi-win.dtb \
+ sun50i-a64-pine64-lts.dtb \
+ sun50i-a64-pine64-plus.dtb \
+ sun50i-a64-pine64.dtb \
+ sun50i-a64-pinebook.dtb \
+ sun50i-a64-pinephone-1.0.dtb \
+ sun50i-a64-pinephone-1.1.dtb \
+ sun50i-a64-pinephone-1.2.dtb \
+ sun50i-a64-pinetab.dtb \
+ sun50i-a64-sopine-baseboard.dtb \
+ sun50i-a64-teres-i.dtb
+dtb-$(CONFIG_MACH_SUN9I) += \
+ sun9i-a80-optimus.dtb \
+ sun9i-a80-cubieboard4.dtb \
+ sun9i-a80-cx-a99.dtb
+
+dtb-$(CONFIG_VF610) += vf610-colibri-eval-v3.dtb \
+ vf610-twr.dtb \
+ vf610-pcm052.dtb \
+ vf610-bk4r1.dtb
+
+dtb-$(CONFIG_MX23) += \
+ imx23-evk.dtb
+
+dtb-$(CONFIG_TARGET_MX23_OLINUXINO) += \
+ imx23-olinuxino.dtb
+
+dtb-$(CONFIG_MX28) += \
+ imx28-evk.dtb \
+ imx28-xea.dtb
+
+dtb-$(CONFIG_MX51) += \
+ imx51-babbage.dtb
+
+dtb-$(CONFIG_MX53) += imx53-cx9020.dtb \
+ imx53-qsb.dtb \
+ imx53-kp.dtb \
+ imx53-m53menlo.dtb \
+ imx53-usbarmory.dtb
+
+ifneq ($(CONFIG_MX6DL)$(CONFIG_MX6QDL)$(CONFIG_MX6S),)
+dtb-y += \
+ imx6dl-aristainetos2c_7.dtb \
+ imx6dl-aristainetos2c_cslb_7.dtb \
+ imx6dl-brppt2.dtb \
+ imx6dl-cubox-i.dtb \
+ imx6dl-cubox-i-emmc-som-v15.dtb \
+ imx6dl-cubox-i-som-v15.dtb \
+ imx6dl-dhcom-pdk2.dtb \
+ imx6dl-dhcom-picoitx.dts \
+ imx6dl-gw51xx.dtb \
+ imx6dl-gw52xx.dtb \
+ imx6dl-gw53xx.dtb \
+ imx6dl-gw54xx.dtb \
+ imx6dl-gw551x.dtb \
+ imx6dl-gw552x.dtb \
+ imx6dl-gw553x.dtb \
+ imx6dl-gw560x.dtb \
+ imx6dl-gw5903.dtb \
+ imx6dl-gw5904.dtb \
+ imx6dl-gw5907.dtb \
+ imx6dl-gw5910.dtb \
+ imx6dl-gw5912.dtb \
+ imx6dl-gw5913.dtb \
+ imx6dl-hummingboard2.dtb \
+ imx6dl-hummingboard2-emmc-som-v15.dtb \
+ imx6dl-hummingboard2-som-v15.dtb \
+ imx6dl-hummingboard.dtb \
+ imx6dl-hummingboard-emmc-som-v15.dtb \
+ imx6dl-hummingboard-som-v15.dtb \
+ imx6dl-icore.dtb \
+ imx6dl-icore-mipi.dtb \
+ imx6dl-icore-rqs.dtb \
+ imx6dl-mba6a.dtb \
+ imx6dl-mba6b.dtb \
+ imx6dl-mamoj.dtb \
+ imx6dl-nitrogen6x.dtb \
+ imx6dl-pico.dtb \
+ imx6dl-udoo.dtb \
+ imx6dl-riotboard.dtb \
+ imx6dl-sabreauto.dtb \
+ imx6dl-sabresd.dtb \
+ imx6dl-wandboard-revd1.dtb \
+ imx6s-dhcom-drc02.dtb
+
+endif
+
+ifneq ($(CONFIG_MX6Q)$(CONFIG_MX6QDL),)
+dtb-y += \
+ imx6q-apalis-eval.dtb \
+ imx6q-bosch-acc.dtb \
+ imx6q-cm-fx6.dtb \
+ imx6q-cubox-i.dtb \
+ imx6q-cubox-i-emmc-som-v15.dtb \
+ imx6q-cubox-i-som-v15.dtb \
+ imx6q-dhcom-pdk2.dtb \
+ imx6q-display5.dtb \
+ imx6q-gw51xx.dtb \
+ imx6q-gw52xx.dtb \
+ imx6q-gw53xx.dtb \
+ imx6q-gw54xx.dtb \
+ imx6q-gw551x.dtb \
+ imx6q-gw552x.dtb \
+ imx6q-gw553x.dtb \
+ imx6q-gw560x.dtb \
+ imx6q-gw5903.dtb \
+ imx6q-gw5904.dtb \
+ imx6q-gw5907.dtb \
+ imx6q-gw5910.dtb \
+ imx6q-gw5912.dtb \
+ imx6q-gw5913.dtb \
+ imx6q-hummingboard2.dtb \
+ imx6q-hummingboard2-emmc-som-v15.dtb \
+ imx6q-hummingboard2-som-v15.dtb \
+ imx6q-hummingboard.dtb \
+ imx6q-hummingboard-emmc-som-v15.dtb \
+ imx6q-hummingboard-som-v15.dtb \
+ imx6q-icore.dtb \
+ imx6q-icore-mipi.dtb \
+ imx6q-icore-rqs.dtb \
+ imx6q-kp.dtb \
+ imx6q-logicpd.dtb \
+ imx6q-marsboard.dtb \
+ imx6q-mba6a.dtb \
+ imx6q-mba6b.dtb \
+ imx6q-mccmon6.dtb\
+ imx6q-nitrogen6x.dtb \
+ imx6q-novena.dtb \
+ imx6q-pico.dtb \
+ imx6q-phytec-mira-rdk-nand.dtb \
+ imx6q-udoo.dtb \
+ imx6q-sabreauto.dtb \
+ imx6q-sabrelite.dtb \
+ imx6q-sabresd.dtb \
+ imx6q-tbs2910.dtb \
+ imx6q-wandboard-revd1.dtb \
+ imx6qp-sabreauto.dtb \
+ imx6qp-sabresd.dtb \
+ imx6qp-wandboard-revd1.dtb \
+
+endif
+
+dtb-$(CONFIG_MX6SL) += imx6sl-evk.dtb
+
+dtb-$(CONFIG_MX6SLL) += imx6sll-evk.dtb
+
+dtb-$(CONFIG_MX6SX) += \
+ imx6sx-sabreauto.dtb \
+ imx6sx-sdb.dtb \
+ imx6sx-softing-vining-2000.dtb \
+ imx6sx-udoo-neo-basic.dtb \
+ imx6sx-udoo-neo-extended.dtb \
+ imx6sx-udoo-neo-full.dtb
+
+dtb-$(CONFIG_MX6UL) += \
+ imx6ul-geam.dtb \
+ imx6ul-isiot-emmc.dtb \
+ imx6ul-isiot-nand.dtb \
+ imx6ul-opos6uldev.dtb \
+ imx6ul-14x14-evk.dtb \
+ imx6ul-9x9-evk.dtb \
+ imx6ul-9x9-evk.dtb \
+ imx6ul-liteboard.dtb \
+ imx6ul-phytec-segin-ff-rdk-nand.dtb \
+ imx6ul-pico-hobbit.dtb \
+ imx6ul-pico-pi.dtb \
+ imx6ul-kontron-bl.dtb \
+ imx6ull-kontron-bl.dtb
+
+dtb-$(CONFIG_MX6ULL) += \
+ imx6ull-14x14-evk.dtb \
+ imx6ull-colibri-emmc-eval-v3.dtb \
+ imx6ull-colibri-eval-v3.dtb \
+ imx6ull-myir-mys-6ulx-eval.dtb \
+ imx6ull-seeed-npi-imx6ull-dev-board.dtb \
+ imx6ull-phytec-segin-ff-rdk-emmc.dtb \
+ imx6ull-dart-6ul.dtb \
+ imx6ull-somlabs-visionsom.dtb \
+ imx6ulz-bsh-smm-m2.dtb \
+ imx6ulz-14x14-evk.dtb
+
+dtb-$(CONFIG_ARCH_MX6) += \
+ imx6q-apalis-eval.dtb \
+ imx6dl-colibri-eval-v3.dtb
+
+dtb-$(CONFIG_O4_IMX_NANO) += \
+ o4-imx-nano.dtb
+
+dtb-$(CONFIG_EV_IMX280_NANO_X_MB) += \
+ ev-imx280-nano-x-mb.dtb
+
+dtb-$(CONFIG_MX7) += imx7d-sdb.dtb \
+ imx7d-sdb-qspi.dtb \
+ imx7-cm.dtb \
+ imx7d-colibri-emmc-eval-v3.dtb \
+ imx7d-colibri-eval-v3.dtb \
+ imx7s-warp.dtb \
+ imx7d-meerkat96.dtb \
+ imx7d-pico-pi.dtb \
+ imx7d-pico-hobbit.dtb \
+ imx7d-smegw01.dtb
+
+dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-com.dtb \
+ imx7ulp-evk.dtb
+
+dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
+
+dtb-$(CONFIG_ARCH_IMX8) += \
+ fsl-imx8qm-apalis.dtb \
+ fsl-imx8qm-mek.dtb \
+ imx8qm-cgtqmx8.dtb \
+ imx8qm-rom7720-a1.dtb \
+ fsl-imx8qxp-ai_ml.dtb \
+ fsl-imx8qxp-colibri.dtb \
+ fsl-imx8qxp-mek.dtb \
+ imx8-deneb.dtb \
+ imx8-giedi.dtb
+
+dtb-$(CONFIG_ARCH_IMX8ULP) += \
+ imx8ulp-evk.dtb
+
+dtb-$(CONFIG_ARCH_IMX8M) += \
+ imx8mm-data-modul-edm-sbc.dtb \
+ imx8mm-evk.dtb \
+ imx8mm-icore-mx8mm-ctouch2.dtb \
+ imx8mm-icore-mx8mm-edimm2.2.dtb \
+ imx8mm-kontron-bl.dtb \
+ imx8mm-kontron-bl-osm-s.dtb \
+ imx8mm-mx8menlo.dtb \
+ imx8mm-phg.dtb \
+ imx8mm-venice.dtb \
+ imx8mm-venice-gw71xx-0x.dtb \
+ imx8mm-venice-gw72xx-0x.dtb \
+ imx8mm-venice-gw73xx-0x.dtb \
+ imx8mm-venice-gw7901.dtb \
+ imx8mm-venice-gw7902.dtb \
+ imx8mm-venice-gw7903.dtb \
+ imx8mm-venice-gw7904.dtb \
+ imx8mm-verdin-wifi-dev.dtb \
+ phycore-imx8mm.dtb \
+ imx8mn-bsh-smm-s2.dtb \
+ imx8mn-bsh-smm-s2pro.dtb \
+ imx8mn-ddr4-evk.dtb \
+ imx8mq-cm.dtb \
+ imx8mn-evk.dtb \
+ imx8mn-var-som-symphony.dtb \
+ imx8mn-venice.dtb \
+ imx8mn-venice-gw7902.dtb \
+ imx8mq-evk.dtb \
+ imx8mm-beacon-kit.dtb \
+ imx8mn-beacon-kit.dtb \
+ imx8mq-mnt-reform2.dtb \
+ imx8mq-phanbell.dtb \
+ imx8mp-dhcom-pdk2.dtb \
+ imx8mp-evk.dtb \
+ imx8mp-icore-mx8mp-edimm2.2.dtb \
+ imx8mp-msc-sm2s.dtb \
+ imx8mp-phyboard-pollux-rdk.dtb \
+ imx8mp-venice.dtb \
+ imx8mp-venice-gw74xx.dtb \
+ imx8mp-verdin-wifi-dev.dtb \
+ imx8mq-pico-pi.dtb \
+ imx8mq-kontron-pitx-imx8m.dtb \
+ imx8mq-librem5-r4.dtb
+
+dtb-$(CONFIG_ARCH_IMX9) += \
+ imx93-11x11-evk.dtb
+
+dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \
+ imxrt1020-evk.dtb \
+ imxrt1170-evk.dtb \
+
+dtb-$(CONFIG_RCAR_GEN2) += \
+ r8a7790-lager-u-boot.dtb \
+ r8a7790-stout-u-boot.dtb \
+ r8a7791-koelsch-u-boot.dtb \
+ r8a7791-porter-u-boot.dtb \
+ r8a7792-blanche-u-boot.dtb \
+ r8a7793-gose-u-boot.dtb \
+ r8a7794-alt-u-boot.dtb \
+ r8a7794-silk-u-boot.dtb
+
+dtb-$(CONFIG_RCAR_GEN3) += \
+ r8a774a1-beacon-rzg2m-kit.dtb \
+ r8a774b1-beacon-rzg2n-kit.dtb \
+ r8a774e1-beacon-rzg2h-kit.dtb \
+ r8a774a1-hihope-rzg2m-u-boot.dtb \
+ r8a774b1-hihope-rzg2n-u-boot.dtb \
+ r8a774c0-ek874-u-boot.dtb \
+ r8a774e1-hihope-rzg2h-u-boot.dtb \
+ r8a77950-ulcb-u-boot.dtb \
+ r8a77950-salvator-x-u-boot.dtb \
+ r8a77960-ulcb-u-boot.dtb \
+ r8a77960-salvator-x-u-boot.dtb \
+ r8a77965-ulcb-u-boot.dtb \
+ r8a77965-salvator-x-u-boot.dtb \
+ r8a77970-eagle-u-boot.dtb \
+ r8a77980-condor-u-boot.dtb \
+ r8a77990-ebisu-u-boot.dtb \
+ r8a77995-draak-u-boot.dtb \
+ r8a779a0-falcon-u-boot.dtb
+
+ifdef CONFIG_RCAR_GEN3
+DTC_FLAGS += -R 4 -p 0x1000
+endif
+
+dtb-$(CONFIG_RZA1) += \
+ r7s72100-gr-peach-u-boot.dtb
+
+dtb-$(CONFIG_ARCH_KEYSTONE) += keystone-k2hk-evm.dtb \
+ keystone-k2l-evm.dtb \
+ keystone-k2e-evm.dtb \
+ keystone-k2g-evm.dtb \
+ keystone-k2g-generic.dtb \
+ keystone-k2g-ice.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9261EK) += at91sam9261ek.dtb
+
+dtb-$(CONFIG_TARGET_PM9261) += at91sam9261ek.dtb
+
+dtb-$(CONFIG_TARGET_PM9263) += at91sam9263ek.dtb
+
+dtb-$(CONFIG_TARGET_MEESC) += at91sam9263ek.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9263EK) += at91sam9263ek.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9RLEK) += at91sam9rlek.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9260EK) += \
+ at91sam9260ek.dtb \
+ at91sam9g20ek.dtb \
+ at91sam9g20ek_2mmc.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9M10G45EK) += at91sam9m10g45ek.dtb
+
+dtb-$(CONFIG_TARGET_PM9G45) += at91sam9m10g45ek.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9X5EK) += \
+ at91sam9g15ek.dtb \
+ at91sam9g25ek.dtb \
+ at91sam9g35ek.dtb \
+ at91sam9x25ek.dtb \
+ at91sam9x35ek.dtb
+
+dtb-$(CONFIG_TARGET_SAM9X60EK) += sam9x60ek.dtb
+
+dtb-$(CONFIG_TARGET_SAM9X60_CURIOSITY) += at91-sam9x60_curiosity.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9N12EK) += at91sam9n12ek.dtb
+
+dtb-$(CONFIG_TARGET_GARDENA_SMART_GATEWAY_AT91SAM) += \
+ at91sam9g25-gardena-smart-gateway.dtb
+
+dtb-$(CONFIG_TARGET_ETHERNUT5) += ethernut5.dtb
+
+dtb-$(CONFIG_TARGET_USB_A9263) += usb_a9263.dtb
+
+dtb-$(CONFIG_TARGET_OMAP3_LOGIC) += \
+ logicpd-som-lv-35xx-devkit.dtb \
+ logicpd-som-lv-37xx-devkit.dtb \
+ logicpd-torpedo-35xx-devkit.dtb \
+ logicpd-torpedo-37xx-devkit.dtb
+
+dtb-$(CONFIG_TARGET_OMAP3_EVM) += \
+ omap3-evm-37xx.dtb \
+ omap3-evm.dtb
+
+dtb-$(CONFIG_TARGET_OMAP3_BEAGLE) += \
+ omap3-beagle-xm-ab.dtb \
+ omap3-beagle-xm.dtb \
+ omap3-beagle.dtb
+
+dtb-$(CONFIG_TARGET_DEVKIT8000) += omap3-devkit8000.dtb
+
+dtb-$(CONFIG_TARGET_OMAP3_IGEP00X0) += \
+ omap3-igep0020.dtb
+
+dtb-$(CONFIG_TARGET_OMAP4_PANDA) += \
+ omap4-panda.dtb \
+ omap4-panda-es.dtb
+
+dtb-$(CONFIG_TARGET_OMAP4_SDP4430) += \
+ omap4-sdp.dtb \
+ omap4-sdp-es23plus.dtb
+
+dtb-$(CONFIG_TARGET_OMAP5_UEVM) += \
+ omap5-uevm.dtb
+
+dtb-$(CONFIG_TARGET_SAMA7G5EK) += \
+ at91-sama7g5ek.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D2_PTC_EK) += \
+ at91-sama5d2_ptc_ek.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \
+ at91-sama5d2_xplained.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D27_SOM1_EK) += \
+ at91-sama5d27_som1_ek.dtb \
+ at91-sama5d27_giantboard.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D27_WLSOM1_EK) += \
+ at91-sama5d27_wlsom1_ek.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D2_ICP) += \
+ at91-sama5d2_icp.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D3XEK) += \
+ sama5d31ek.dtb \
+ sama5d33ek.dtb \
+ sama5d34ek.dtb \
+ sama5d35ek.dtb \
+ sama5d36ek.dtb \
+ sama5d36ek_cmp.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D3_XPLAINED) += \
+ at91-sama5d3_xplained.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D4EK) += \
+ at91-sama5d4ek.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D4_XPLAINED) += \
+ at91-sama5d4_xplained.dtb
+
+dtb-$(CONFIG_TARGET_VINCO) += \
+ at91-vinco.dtb
+
+dtb-$(CONFIG_ARCH_BCM283X) += \
+ bcm2835-rpi-a.dtb \
+ bcm2835-rpi-a-plus.dtb \
+ bcm2835-rpi-b.dtb \
+ bcm2835-rpi-b-plus.dtb \
+ bcm2835-rpi-b-rev2.dtb \
+ bcm2835-rpi-cm1-io1.dtb \
+ bcm2835-rpi-zero.dtb \
+ bcm2835-rpi-zero-w.dtb\
+ bcm2836-rpi-2-b.dtb \
+ bcm2837-rpi-3-a-plus.dtb \
+ bcm2837-rpi-3-b.dtb \
+ bcm2837-rpi-3-b-plus.dtb \
+ bcm2837-rpi-cm3-io3.dtb \
+ bcm2711-rpi-4-b.dtb
+
+dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb
+
+dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb
+
+dtb-$(CONFIG_BCM47622) += \
+ bcm947622.dtb
+dtb-$(CONFIG_BCM4908) += \
+ bcm94908.dtb
+dtb-$(CONFIG_BCM4912) += \
+ bcm94912.dtb
+dtb-$(CONFIG_BCM63138) += \
+ bcm963138.dtb
+dtb-$(CONFIG_BCM63146) += \
+ bcm963146.dtb
+dtb-$(CONFIG_BCM63148) += \
+ bcm963148.dtb
+dtb-$(CONFIG_BCM63158) += \
+ bcm963158.dtb
+dtb-$(CONFIG_BCM63178) += \
+ bcm963178.dtb
+dtb-$(CONFIG_BCM6756) += \
+ bcm96756.dtb
+dtb-$(CONFIG_BCM6813) += \
+ bcm96813.dtb
+dtb-$(CONFIG_BCM6846) += \
+ bcm96846.dtb
+dtb-$(CONFIG_BCM6855) += \
+ bcm96855.dtb \
+ bcm96753ref.dtb
+dtb-$(CONFIG_BCM6856) += \
+ bcm96856.dtb \
+ bcm968360bg.dtb
+dtb-$(CONFIG_BCM6858) += \
+ bcm96858.dtb \
+ bcm968580xref.dtb
+dtb-$(CONFIG_BCM6878) += \
+ bcm96878.dtb
+
+dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb
+dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
+
+dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
+
+dtb-$(CONFIG_STM32MP13x) += \
+ stm32mp135f-dk.dtb
+
+dtb-$(CONFIG_STM32MP15x) += \
+ stm32mp157a-dk1.dtb \
+ stm32mp157a-dk1-scmi.dtb \
+ stm32mp157a-icore-stm32mp1-ctouch2.dtb \
+ stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
+ stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
+ stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
+ stm32mp157c-dk2.dtb \
+ stm32mp157c-dk2-scmi.dtb \
+ stm32mp157c-ed1.dtb \
+ stm32mp157c-ed1-scmi.dtb \
+ stm32mp157c-ev1.dtb \
+ stm32mp157c-ev1-scmi.dtb \
+ stm32mp157c-odyssey.dtb \
+ stm32mp15xx-dhcom-drc02.dtb \
+ stm32mp15xx-dhcom-pdk2.dtb \
+ stm32mp15xx-dhcom-picoitx.dtb \
+ stm32mp15xx-dhcor-avenger96.dtb \
+ stm32mp15xx-dhcor-drc-compact.dtb \
+ stm32mp15xx-dhcor-testbench.dtb
+
+dtb-$(CONFIG_SOC_K3_AM654) += \
+ k3-am654-base-board.dtb \
+ k3-am654-r5-base-board.dtb \
+ k3-am65-iot2050-spl.dtb \
+ k3-am6528-iot2050-basic.dtb \
+ k3-am6528-iot2050-basic-pg2.dtb \
+ k3-am6548-iot2050-advanced.dtb \
+ k3-am6548-iot2050-advanced-pg2.dtb
+dtb-$(CONFIG_SOC_K3_J721E) += k3-j721e-common-proc-board.dtb \
+ k3-j721e-r5-common-proc-board.dtb \
+ k3-j7200-common-proc-board.dtb \
+ k3-j7200-r5-common-proc-board.dtb \
+ k3-j721e-sk.dtb \
+ k3-j721e-r5-sk.dtb
+dtb-$(CONFIG_SOC_K3_J721S2) += k3-am68-sk-base-board.dtb\
+ k3-am68-sk-r5-base-board.dtb\
+ k3-j721s2-common-proc-board.dtb\
+ k3-j721s2-r5-common-proc-board.dtb
+dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-evm.dtb \
+ k3-am642-r5-evm.dtb \
+ k3-am642-sk.dtb \
+ k3-am642-r5-sk.dtb
+
+dtb-$(CONFIG_SOC_K3_AM625) += k3-am625-sk.dtb \
+ k3-am625-r5-sk.dtb
+
+dtb-$(CONFIG_SOC_K3_AM625) += k3-am62a7-sk.dtb \
+ k3-am62a7-r5-sk.dtb
+
+dtb-$(CONFIG_ARCH_MEDIATEK) += \
+ mt7622-rfb.dtb \
+ mt7623a-unielec-u7623-02-emmc.dtb \
+ mt7622-bananapi-bpi-r64.dtb \
+ mt7623n-bananapi-bpi-r2.dtb \
+ mt7629-rfb.dtb \
+ mt7981-rfb.dtb \
+ mt7981-emmc-rfb.dtb \
+ mt7981-sd-rfb.dtb \
+ mt7986a-rfb.dtb \
+ mt7986b-rfb.dtb \
+ mt7986a-sd-rfb.dtb \
+ mt7986b-sd-rfb.dtb \
+ mt7986a-emmc-rfb.dtb \
+ mt7986b-emmc-rfb.dtb \
+ mt8183-pumpkin.dtb \
+ mt8512-bm1-emmc.dtb \
+ mt8516-pumpkin.dtb \
+ mt8518-ap1-emmc.dtb
+
+dtb-$(CONFIG_ARCH_NPCM7xx) += nuvoton-npcm750-evb.dtb
+dtb-$(CONFIG_ARCH_NPCM8XX) += nuvoton-npcm845-evb.dtb
+dtb-$(CONFIG_XEN) += xenguest-arm64.dtb
+
+dtb-$(CONFIG_ARCH_OCTEONTX) += octeontx.dtb
+dtb-$(CONFIG_ARCH_OCTEONTX2) += octeontx.dtb
+
+dtb-$(CONFIG_TARGET_GE_BX50V3) += \
+ imx6q-bx50v3.dtb \
+ imx6q-b850v3.dtb \
+ imx6q-b650v3.dtb \
+ imx6q-b450v3.dtb
+
+dtb-$(CONFIG_TARGET_GE_B1X5V2) += imx6dl-b1x5v2.dtb
+dtb-$(CONFIG_TARGET_MX53PPD) += imx53-ppd.dtb
+
+# TODO(Linus Walleij <linus.walleij@linaro.org>): Should us a single vexpress
+# Kconfig option to build all of these. See examples above.
+dtb-$(CONFIG_TARGET_VEXPRESS_CA9X4) += vexpress-v2p-ca9.dtb
+dtb-$(CONFIG_TARGET_VEXPRESS64_BASE_FVP) += fvp-base-revc.dtb
+dtb-$(CONFIG_TARGET_VEXPRESS64_BASER_FVP) += arm_fvp.dtb
+dtb-$(CONFIG_TARGET_VEXPRESS64_JUNO) += juno-r2.dtb
+
+dtb-$(CONFIG_TARGET_TOTAL_COMPUTE) += total_compute.dtb
+
+dtb-$(CONFIG_TARGET_DURIAN) += phytium-durian.dtb
+dtb-$(CONFIG_TARGET_POMELO) += phytium-pomelo.dtb
+
+dtb-$(CONFIG_TARGET_PRESIDIO_ASIC) += ca-presidio-engboard.dtb
+
+dtb-$(CONFIG_TARGET_GXP) += hpe-bmc-dl360gen10.dts
+
+dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE) += imx8mm-cl-iot-gate.dtb \
+ imx8mm-cl-iot-gate-ied.dtbo \
+ imx8mm-cl-iot-gate-ied-adc0.dtbo \
+ imx8mm-cl-iot-gate-ied-adc1.dtbo \
+ imx8mm-cl-iot-gate-ied-can0.dtbo \
+ imx8mm-cl-iot-gate-ied-can1.dtbo \
+ imx8mm-cl-iot-gate-ied-tpm0.dtbo \
+ imx8mm-cl-iot-gate-ied-tpm1.dtbo
+
+dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE_OPTEE) += imx8mm-cl-iot-gate-optee.dtb \
+ imx8mm-cl-iot-gate-ied.dtbo \
+ imx8mm-cl-iot-gate-ied-adc0.dtbo \
+ imx8mm-cl-iot-gate-ied-adc1.dtbo \
+ imx8mm-cl-iot-gate-ied-can0.dtbo \
+ imx8mm-cl-iot-gate-ied-can1.dtbo \
+ imx8mm-cl-iot-gate-ied-tpm0.dtbo \
+ imx8mm-cl-iot-gate-ied-tpm1.dtbo
+
+ifneq ($(CONFIG_TARGET_IMX8MP_RSB3720A1_4G)$(CONFIG_TARGET_IMX8MP_RSB3720A1_6G),)
+dtb-y += imx8mp-rsb3720-a1.dtb
+endif
+
+dtb-$(CONFIG_TARGET_EA_LPC3250DEVKITV2) += lpc3250-ea3250.dtb
+
+dtb-$(CONFIG_ARCH_QEMU) += qemu-arm.dtb qemu-arm64.dtb
+
+dtb-$(CONFIG_TARGET_CORSTONE1000) += corstone1000-mps3.dtb \
+ corstone1000-fvp.dtb
+
+include $(srctree)/scripts/Makefile.dts
+
+targets += $(dtb-y)
+
+# Add any required device tree compiler flags here
+DTC_FLAGS += -a 0x8
+
+PHONY += dtbs
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+ @:
+
+clean-files := *.dtb *.dtbo *_HS
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-cpu-opp-1.0ghz.dtsi
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-cpu-opp-1.0ghz.dtsi (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-cpu-opp-1.0ghz.dtsi (revision 385)
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
+
+/ {
+ cpu_opp_table: opp-table-cpu {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-288000000 {
+ opp-hz = /bits/ 64 <288000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-336000000 {
+ opp-hz = /bits/ 64 <336000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-576000000 {
+ opp-hz = /bits/ 64 <576000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-648000000 {
+ opp-hz = /bits/ 64 <648000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-912000000 {
+ opp-hz = /bits/ 64 <912000000>;
+ opp-microvolt = <1120000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1120000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ };
+};
+
+&cpu0 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-cpu-opp-1.2ghz.dtsi
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-cpu-opp-1.2ghz.dtsi (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-cpu-opp-1.2ghz.dtsi (revision 385)
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
+
+/ {
+ cpu_opp_table: opp-table-cpu {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-288000000 {
+ opp-hz = /bits/ 64 <288000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-336000000 {
+ opp-hz = /bits/ 64 <336000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-648000000 {
+ opp-hz = /bits/ 64 <648000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1120000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-10560000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ opp-microvolt = <1140000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1180000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+ };
+};
+
+&cpu0 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-cpu-opp-1.4ghz.dtsi
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-cpu-opp-1.4ghz.dtsi (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-cpu-opp-1.4ghz.dtsi (revision 385)
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
+
+/ {
+ cpu_opp_table: opp-table-cpu {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-288000000 {
+ opp-hz = /bits/ 64 <288000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-336000000 {
+ opp-hz = /bits/ 64 <336000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-648000000 {
+ opp-hz = /bits/ 64 <648000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1120000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1180000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1368000000 {
+ opp-hz = /bits/ 64 <1368000000>;
+ opp-microvolt = <1300000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+ };
+};
+
+&cpu0 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-cpu-opp.dtsi
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-cpu-opp.dtsi (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-cpu-opp.dtsi (revision 385)
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
+
+/ {
+ cpu_opp_table: opp-table-cpu {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-288000000 {
+ opp-hz = /bits/ 64 <288000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-336000000 {
+ opp-hz = /bits/ 64 <336000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-648000000 {
+ opp-hz = /bits/ 64 <648000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1200000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1240000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1368000000 {
+ opp-hz = /bits/ 64 <1368000000>;
+ opp-microvolt = <1300000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+ };
+};
+
+&cpu0 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-3-1.4.dtsi
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-3-1.4.dtsi (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-3-1.4.dtsi (revision 385)
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+#include <sunxi-h3-h5.dtsi>
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0>;
+ enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <1>;
+ enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <2>;
+ enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <3>;
+ enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ arm,no-tick-in-suspend;
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc {
+ syscon: system-control@1c00000 {
+ compatible = "allwinner,sun50i-h5-system-control";
+ reg = <0x01c00000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram_a2: sram@40000 {
+ compatible = "mmio-sram";
+ reg = <0x00040000 0x14000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00040000 0x14000>;
+
+ scpi_sram: scp-shmem@13c00 {
+ compatible = "arm,scp-shmem";
+ reg = <0x13c00 0x200>;
+ };
+ };
+
+ sram_c1: sram@18000 {
+ compatible = "mmio-sram";
+ reg = <0x00018000 0x1c000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00018000 0x1c000>;
+
+ ve_sram: sram-section@0 {
+ compatible = "allwinner,sun50i-h5-sram-c1",
+ "allwinner,sun4i-a10-sram-c1";
+ reg = <0x000000 0x1c000>;
+ };
+ };
+ };
+
+ video-codec@1c0e000 {
+ compatible = "allwinner,sun50i-h5-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_BUS_VE>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
+ crypto: crypto@1c15000 {
+ compatible = "allwinner,sun50i-h5-crypto";
+ reg = <0x01c15000 0x1000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_CE>;
+ };
+
+ deinterlace: deinterlace@1e00000 {
+ compatible = "allwinner,sun8i-h3-deinterlace";
+ reg = <0x01e00000 0x20000>;
+ clocks = <&ccu CLK_BUS_DEINTERLACE>,
+ <&ccu CLK_DEINTERLACE>,
+ <&ccu CLK_DRAM_DEINTERLACE>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_DEINTERLACE>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&mbus 9>;
+ interconnect-names = "dma-mem";
+ };
+
+ mali: gpu@1e80000 {
+ compatible = "allwinner,sun50i-h5-mali", "arm,mali-450";
+ reg = <0x01e80000 0x30000>;
+ /*
+ * While the datasheet lists an interrupt for the
+ * PMU, the actual silicon does not have the PMU
+ * block. Reads all return zero, and writes are
+ * ignored.
+ */
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pp2",
+ "ppmmu2",
+ "pp3",
+ "ppmmu3";
+ clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+ clock-names = "bus", "core";
+ resets = <&ccu RST_BUS_GPU>;
+
+ assigned-clocks = <&ccu CLK_GPU>;
+ assigned-clock-rates = <384000000>;
+ };
+
+ ths: thermal-sensor@1c25000 {
+ compatible = "allwinner,sun50i-h5-ths";
+ reg = <0x01c25000 0x400>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_BUS_THS>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+ clock-names = "bus", "mod";
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ /* milliseconds */
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&ths 0>;
+
+ trips {
+ cpu_warm: cpu_warm {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_hot0: cpu_hot0 {
+ temperature = <78000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_hot1: cpu_hot1 {
+ temperature = <81000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_very_hot0: cpu_very_hot0 {
+ temperature = <84000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_very_hot1: cpu_very_hot1 {
+ temperature = <87000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_very_hot2: cpu_very_hot2 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_very_hot3: cpu_very_hot3 {
+ temperature = <92000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu_crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ cpu_warm_limit_cpu {
+ trip = <&cpu_warm>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT 1>;
+ };
+
+ cpu_hot_limit_cpu0 {
+ trip = <&cpu_hot0>;
+ cooling-device = <&cpu0 1 2>;
+ };
+
+ cpu_hot_limit_cpu1 {
+ trip = <&cpu_hot1>;
+ cooling-device = <&cpu0 2 3>;
+ };
+
+ cpu_very_hot_limit_cpu0 {
+ trip = <&cpu_very_hot0>;
+ cooling-device = <&cpu0 3 4>;
+ };
+
+ cpu_very_hot_limit_cpu1 {
+ trip = <&cpu_very_hot1>;
+ cooling-device = <&cpu0 4 5>;
+ };
+
+ cpu_very_hot_limit_cpu2 {
+ trip = <&cpu_very_hot2>;
+ cooling-device = <&cpu0 5 6>;
+ };
+
+ cpu_very_hot_limit_cpu3 {
+ trip = <&cpu_very_hot3>;
+ cooling-device = <&cpu0 7 THERMAL_NO_LIMIT>;
+ };
+
+ };
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 1>;
+ };
+ };
+};
+
+&ccu {
+ compatible = "allwinner,sun50i-h5-ccu";
+};
+
+&display_clocks {
+ compatible = "allwinner,sun50i-h5-de2-clk";
+};
+
+&mmc0 {
+ compatible = "allwinner,sun50i-h5-mmc",
+ "allwinner,sun50i-a64-mmc";
+ clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
+};
+
+&mmc1 {
+ compatible = "allwinner,sun50i-h5-mmc",
+ "allwinner,sun50i-a64-mmc";
+ clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
+};
+
+&mmc2 {
+ compatible = "allwinner,sun50i-h5-emmc",
+ "allwinner,sun50i-a64-emmc";
+ clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
+};
+
+&pio {
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ compatible = "allwinner,sun50i-h5-pinctrl";
+};
+
+&rtc {
+ compatible = "allwinner,sun50i-h5-rtc";
+};
+
+&sid {
+ compatible = "allwinner,sun50i-h5-sid";
+};
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-3-1.4p.dtsi
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-3-1.4p.dtsi (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-3-1.4p.dtsi (revision 385)
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+#include <sunxi-h3-h5.dtsi>
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0>;
+ enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <1>;
+ enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <2>;
+ enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <3>;
+ enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ arm,no-tick-in-suspend;
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc {
+ syscon: system-control@1c00000 {
+ compatible = "allwinner,sun50i-h5-system-control";
+ reg = <0x01c00000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram_a2: sram@40000 {
+ compatible = "mmio-sram";
+ reg = <0x00040000 0x14000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00040000 0x14000>;
+
+ scpi_sram: scp-shmem@13c00 {
+ compatible = "arm,scp-shmem";
+ reg = <0x13c00 0x200>;
+ };
+ };
+
+ sram_c1: sram@18000 {
+ compatible = "mmio-sram";
+ reg = <0x00018000 0x1c000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00018000 0x1c000>;
+
+ ve_sram: sram-section@0 {
+ compatible = "allwinner,sun50i-h5-sram-c1",
+ "allwinner,sun4i-a10-sram-c1";
+ reg = <0x000000 0x1c000>;
+ };
+ };
+ };
+
+ video-codec@1c0e000 {
+ compatible = "allwinner,sun50i-h5-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_BUS_VE>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
+ crypto: crypto@1c15000 {
+ compatible = "allwinner,sun50i-h5-crypto";
+ reg = <0x01c15000 0x1000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_CE>;
+ };
+
+ deinterlace: deinterlace@1e00000 {
+ compatible = "allwinner,sun8i-h3-deinterlace";
+ reg = <0x01e00000 0x20000>;
+ clocks = <&ccu CLK_BUS_DEINTERLACE>,
+ <&ccu CLK_DEINTERLACE>,
+ <&ccu CLK_DRAM_DEINTERLACE>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_DEINTERLACE>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&mbus 9>;
+ interconnect-names = "dma-mem";
+ };
+
+ mali: gpu@1e80000 {
+ compatible = "allwinner,sun50i-h5-mali", "arm,mali-450";
+ reg = <0x01e80000 0x30000>;
+ /*
+ * While the datasheet lists an interrupt for the
+ * PMU, the actual silicon does not have the PMU
+ * block. Reads all return zero, and writes are
+ * ignored.
+ */
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pp2",
+ "ppmmu2",
+ "pp3",
+ "ppmmu3";
+ clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+ clock-names = "bus", "core";
+ resets = <&ccu RST_BUS_GPU>;
+
+ assigned-clocks = <&ccu CLK_GPU>;
+ assigned-clock-rates = <384000000>;
+ };
+
+ ths: thermal-sensor@1c25000 {
+ compatible = "allwinner,sun50i-h5-ths";
+ reg = <0x01c25000 0x400>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_BUS_THS>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+ clock-names = "bus", "mod";
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ /* milliseconds */
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&ths 0>;
+
+ trips {
+ cpu_warm: cpu_warm {
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_hot0: cpu_hot0 {
+ temperature = <68000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_hot1: cpu_hot1 {
+ temperature = <72000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_very_hot0: cpu_very_hot0 {
+ temperature = <74000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_very_hot1: cpu_very_hot1 {
+ temperature = <78000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_very_hot2: cpu_very_hot2 {
+ temperature = <82000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_very_hot3: cpu_very_hot3 {
+ temperature = <86000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu_crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ cpu_warm_limit_cpu {
+ trip = <&cpu_warm>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT 1>;
+ };
+
+ cpu_hot_limit_cpu0 {
+ trip = <&cpu_hot0>;
+ cooling-device = <&cpu0 1 2>;
+ };
+
+ cpu_hot_limit_cpu1 {
+ trip = <&cpu_hot1>;
+ cooling-device = <&cpu0 2 3>;
+ };
+
+ cpu_very_hot_limit_cpu0 {
+ trip = <&cpu_very_hot0>;
+ cooling-device = <&cpu0 3 4>;
+ };
+
+ cpu_very_hot_limit_cpu1 {
+ trip = <&cpu_very_hot1>;
+ cooling-device = <&cpu0 4 5>;
+ };
+
+ cpu_very_hot_limit_cpu2 {
+ trip = <&cpu_very_hot2>;
+ cooling-device = <&cpu0 5 6>;
+ };
+
+ cpu_very_hot_limit_cpu3 {
+ trip = <&cpu_very_hot3>;
+ cooling-device = <&cpu0 7 THERMAL_NO_LIMIT>;
+ };
+
+ };
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 1>;
+ };
+ };
+};
+
+&ccu {
+ compatible = "allwinner,sun50i-h5-ccu";
+};
+
+&display_clocks {
+ compatible = "allwinner,sun50i-h5-de2-clk";
+};
+
+&mmc0 {
+ compatible = "allwinner,sun50i-h5-mmc",
+ "allwinner,sun50i-a64-mmc";
+ clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
+};
+
+&mmc1 {
+ compatible = "allwinner,sun50i-h5-mmc",
+ "allwinner,sun50i-a64-mmc";
+ clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
+};
+
+&mmc2 {
+ compatible = "allwinner,sun50i-h5-emmc",
+ "allwinner,sun50i-a64-emmc";
+ clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
+};
+
+&pio {
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ compatible = "allwinner,sun50i-h5-pinctrl";
+};
+
+&rtc {
+ compatible = "allwinner,sun50i-h5-rtc";
+};
+
+&sid {
+ compatible = "allwinner,sun50i-h5-sid";
+};
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-1.0ghz.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-1.0ghz.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-1.0ghz.dts (revision 385)
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp-1.0ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.0 GHz";
+ repka-pinout = "1";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "disabled"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "disabled";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+ status = "disabled";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 { /* для совместимости с распбери создаем cs1 */
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-1.2ghz.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-1.2ghz.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-1.2ghz.dts (revision 385)
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp-1.2ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.2 GHz";
+ repka-pinout = "1";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "disabled"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "disabled";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "disabled";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-1.4ghz.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-1.4ghz.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-1.4ghz.dts (revision 385)
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp-1.4ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.4 GHz";
+ repka-pinout = "1";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "disabled"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "disabled";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "disabled";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-1.0ghz.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-1.0ghz.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-1.0ghz.dts (revision 385)
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp-1.0ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.0 GHz";
+ repka-pinout = "2";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-1.2ghz.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-1.2ghz.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-1.2ghz.dts (revision 385)
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp-1.2ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.2 GHz";
+ repka-pinout = "2";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-1.4ghz.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-1.4ghz.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-1.4ghz.dts (revision 385)
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp-1.4ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.4 GHz";
+ repka-pinout = "2";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-i2c2-1.0ghz.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-i2c2-1.0ghz.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-i2c2-1.0ghz.dts (revision 385)
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp-1.0ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.0 GHz";
+ repka-pinout = "4";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-i2c2-1.2ghz.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-i2c2-1.2ghz.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-i2c2-1.2ghz.dts (revision 385)
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp-1.2ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.2 GHz";
+ repka-pinout = "4";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-i2c2-1.4ghz.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-i2c2-1.4ghz.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-i2c2-1.4ghz.dts (revision 385)
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp-1.4ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.4 GHz";
+ repka-pinout = "4";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-i2c2-v1.4.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-i2c2-v1.4.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-i2c2-v1.4.dts (revision 385)
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5-repka-3-1.4.dtsi"
+#include "sun50i-h5-cpu-opp-1.4ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.4 GHz";
+ repka-pinout = "4";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-i2c2-v1.4p.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-i2c2-v1.4p.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-i2c2-v1.4p.dts (revision 385)
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5-repka-3-1.4p.dtsi"
+#include "sun50i-h5-cpu-opp-1.4ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.4 GHz";
+ repka-pinout = "4";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-pwm-1.0ghz.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-pwm-1.0ghz.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-pwm-1.0ghz.dts (revision 385)
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp-1.0ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.0 GHz";
+ repka-pinout = "5";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "okay";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-pwm-1.2ghz.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-pwm-1.2ghz.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-pwm-1.2ghz.dts (revision 385)
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp-1.2ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.2 GHz";
+ repka-pinout = "5";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "okay";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-pwm-1.4ghz.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-pwm-1.4ghz.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-pwm-1.4ghz.dts (revision 385)
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp-1.4ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.4 GHz";
+ repka-pinout = "5";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "okay";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-pwm-v1.4.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-pwm-v1.4.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-pwm-v1.4.dts (revision 385)
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5-repka-3-1.4.dtsi"
+#include "sun50i-h5-cpu-opp-1.4ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.4 GHz";
+ repka-pinout = "5";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "okay";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-pwm-v1.4p.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-pwm-v1.4p.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-pwm-v1.4p.dts (revision 385)
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5-repka-3-1.4p.dtsi"
+#include "sun50i-h5-cpu-opp-1.4ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.4 GHz";
+ repka-pinout = "5";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "okay";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-uart-1.0ghz.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-uart-1.0ghz.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-uart-1.0ghz.dts (revision 385)
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp-1.0ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.0 GHz";
+ repka-pinout = "3";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-uart-1.2ghz.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-uart-1.2ghz.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-uart-1.2ghz.dts (revision 385)
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp-1.2ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.2 GHz";
+ repka-pinout = "3";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-uart-1.4ghz.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-uart-1.4ghz.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-uart-1.4ghz.dts (revision 385)
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp-1.4ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.4 GHz";
+ repka-pinout = "3";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>; /* , <&uart2_rts_cts_pins> пересекается с spi cs1 */
+ status = "okay";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-uart-v1.4.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-uart-v1.4.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-uart-v1.4.dts (revision 385)
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5-repka-3-1.4.dtsi"
+#include "sun50i-h5-cpu-opp-1.4ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.4 GHz";
+ repka-pinout = "3";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-uart-v1.4p.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-uart-v1.4p.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-uart-v1.4p.dts (revision 385)
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5-repka-3-1.4p.dtsi"
+#include "sun50i-h5-cpu-opp-1.4ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.4 GHz";
+ repka-pinout = "3";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-v1.4.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-v1.4.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-v1.4.dts (revision 385)
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5-repka-3-1.4.dtsi"
+#include "sun50i-h5-cpu-opp-1.4ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.4 GHz";
+ repka-pinout = "2";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-v1.4p.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-v1.4p.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt-v1.4p.dts (revision 385)
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5-repka-3-1.4p.dtsi"
+#include "sun50i-h5-cpu-opp-1.4ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.4 GHz";
+ repka-pinout = "2";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-alt.dts (revision 385)
@@ -0,0 +1,407 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "okay"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "okay";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+
+
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-v1.4.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-v1.4.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-v1.4.dts (revision 385)
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5-repka-3-1.4.dtsi"
+#include "sun50i-h5-cpu-opp-1.4ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.4 GHz";
+ repka-pinout = "1";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "disabled"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "disabled";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "disabled";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-v1.4p.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-v1.4p.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3-v1.4p.dts (revision 385)
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5-repka-3-1.4p.dtsi"
+#include "sun50i-h5-cpu-opp-1.4ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ repka-freq = "1.4 GHz";
+ repka-pinout = "1";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "disabled"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&spi0_cs1>;
+ cs-gpios = <0>, <&pio 0 3 0>; /* PA3 */
+
+ status = "disabled";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "disabled";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 {
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3.dts
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3.dts (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5-repka-pi3.dts (revision 385)
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp-1.0ghz.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Repka-Pi3-H5";
+ option = "uboot";
+ compatible = "rbs,repka-pi3", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ pinctrl-names = "default";
+
+ status {
+ label = "rbs:red:status";
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&sound_hdmi {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "disabled"; /* PA19,PA18 */
+};
+
+&i2c0 {
+ status = "disabled"; /* PA11, PA12 */
+};
+
+&r_i2c {
+ status = "disabled";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+®_aldo2 { /* VCC-PG 1.8 */
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+®_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>; /* 1360000 because AXP outputs 0.05 more than expected */
+ regulator-name = "vdd-cpux-a";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-cpux-b";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by rbs-h5 boards are DDR3 -compatibl
+ *
+ */
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+};
+
+®_dldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-3";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-4";
+};
+ /* VCC-wifi-IO 1.8 */
+®_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-1";
+};
+
+®_eldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-2";
+};
+
+®_eldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-wifi-io-3";
+};
+
+/*
+ *
+ *
+ * ^__________^
+*
+*
+*/
+
+®_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&spi0 {
+ pinctrl-names = "default", "default";
+
+ status = "disabled";
+ spidev@0 {
+ compatible = "rohm,dh2228fv"; /* a crutch, since now "spidev" is missing from the kernel driver (spidev.c) */
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ spidev@1 {
+ compatible = "rohm,dh2228fv"; /* a crutch, since now "spidev" is missing from the kernel driver (spidev.c) */
+ status = "okay";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default", "default";
+
+ status = "disabled";
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pio {
+ spi0_cs1: spi0_cs1 { /* для совместимости с распбери создаем cs1 */
+ pins = "PA3";
+ function = "gpio_out";
+ output-high;
+ };
+};
+
+
+&r_pwm {
+ status = "disabled";
+};
+
+/* to debag serial */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+/* to bt-wifi module */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 AP-WAKE-BT */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 BT-WAKE-AP */
+ shutdown-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 BT-RST-N */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>; /* , <&uart2_rts_cts_pins> пересекается с spi cs1 */
+ status = "disabled";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5.dtsi
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5.dtsi (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sun50i-h5.dtsi (revision 385)
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+#include <sunxi-h3-h5.dtsi>
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0>;
+ enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <1>;
+ enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <2>;
+ enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <3>;
+ enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ arm,no-tick-in-suspend;
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc {
+ syscon: system-control@1c00000 {
+ compatible = "allwinner,sun50i-h5-system-control";
+ reg = <0x01c00000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram_a2: sram@40000 {
+ compatible = "mmio-sram";
+ reg = <0x00040000 0x14000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00040000 0x14000>;
+
+ scpi_sram: scp-shmem@13c00 {
+ compatible = "arm,scp-shmem";
+ reg = <0x13c00 0x200>;
+ };
+ };
+
+ sram_c1: sram@18000 {
+ compatible = "mmio-sram";
+ reg = <0x00018000 0x1c000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00018000 0x1c000>;
+
+ ve_sram: sram-section@0 {
+ compatible = "allwinner,sun50i-h5-sram-c1",
+ "allwinner,sun4i-a10-sram-c1";
+ reg = <0x000000 0x1c000>;
+ };
+ };
+ };
+
+ video-codec@1c0e000 {
+ compatible = "allwinner,sun50i-h5-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_BUS_VE>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
+ crypto: crypto@1c15000 {
+ compatible = "allwinner,sun50i-h5-crypto";
+ reg = <0x01c15000 0x1000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_CE>;
+ };
+
+ deinterlace: deinterlace@1e00000 {
+ compatible = "allwinner,sun8i-h3-deinterlace";
+ reg = <0x01e00000 0x20000>;
+ clocks = <&ccu CLK_BUS_DEINTERLACE>,
+ <&ccu CLK_DEINTERLACE>,
+ <&ccu CLK_DRAM_DEINTERLACE>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_DEINTERLACE>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&mbus 9>;
+ interconnect-names = "dma-mem";
+ };
+
+ mali: gpu@1e80000 {
+ compatible = "allwinner,sun50i-h5-mali", "arm,mali-450";
+ reg = <0x01e80000 0x30000>;
+ /*
+ * While the datasheet lists an interrupt for the
+ * PMU, the actual silicon does not have the PMU
+ * block. Reads all return zero, and writes are
+ * ignored.
+ */
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pp2",
+ "ppmmu2",
+ "pp3",
+ "ppmmu3";
+ clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+ clock-names = "bus", "core";
+ resets = <&ccu RST_BUS_GPU>;
+
+ assigned-clocks = <&ccu CLK_GPU>;
+ assigned-clock-rates = <384000000>;
+ };
+
+ ths: thermal-sensor@1c25000 {
+ compatible = "allwinner,sun50i-h5-ths";
+ reg = <0x01c25000 0x400>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_BUS_THS>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+ clock-names = "bus", "mod";
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ /* milliseconds */
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&ths 0>;
+
+ trips {
+ cpu_warm: cpu_warm {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_hot0: cpu_hot0 {
+ temperature = <60000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_hot1: cpu_hot1 {
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_very_hot0: cpu_very_hot0 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_very_hot1: cpu_very_hot1 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_very_hot2: cpu_very_hot2 {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_very_hot3: cpu_very_hot3 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu_crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ cpu_warm_limit_cpu {
+ trip = <&cpu_warm>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT 1>;
+ };
+
+ cpu_hot_limit_cpu0 {
+ trip = <&cpu_hot0>;
+ cooling-device = <&cpu0 1 2>;
+ };
+
+ cpu_hot_limit_cpu1 {
+ trip = <&cpu_hot1>;
+ cooling-device = <&cpu0 2 3>;
+ };
+
+ cpu_very_hot_limit_cpu0 {
+ trip = <&cpu_very_hot0>;
+ cooling-device = <&cpu0 3 4>;
+ };
+
+ cpu_very_hot_limit_cpu1 {
+ trip = <&cpu_very_hot1>;
+ cooling-device = <&cpu0 4 5>;
+ };
+
+ cpu_very_hot_limit_cpu2 {
+ trip = <&cpu_very_hot2>;
+ cooling-device = <&cpu0 5 6>;
+ };
+
+ cpu_very_hot_limit_cpu3 {
+ trip = <&cpu_very_hot3>;
+ cooling-device = <&cpu0 7 THERMAL_NO_LIMIT>;
+ };
+
+ };
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 1>;
+ };
+ };
+};
+
+&ccu {
+ compatible = "allwinner,sun50i-h5-ccu";
+};
+
+&display_clocks {
+ compatible = "allwinner,sun50i-h5-de2-clk";
+};
+
+&mmc0 {
+ compatible = "allwinner,sun50i-h5-mmc",
+ "allwinner,sun50i-a64-mmc";
+ clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
+};
+
+&mmc1 {
+ compatible = "allwinner,sun50i-h5-mmc",
+ "allwinner,sun50i-a64-mmc";
+ clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
+};
+
+&mmc2 {
+ compatible = "allwinner,sun50i-h5-emmc",
+ "allwinner,sun50i-a64-emmc";
+ clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
+};
+
+&pio {
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ compatible = "allwinner,sun50i-h5-pinctrl";
+};
+
+&rtc {
+ compatible = "allwinner,sun50i-h5-rtc";
+};
+
+&sid {
+ compatible = "allwinner,sun50i-h5-sid";
+};
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sunxi-h3-h5.dtsi
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sunxi-h3-h5.dtsi (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/arch/arm/dts/sunxi-h3-h5.dtsi (revision 385)
@@ -0,0 +1,997 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-h3-ccu.h>
+#include <dt-bindings/clock/sun8i-r-ccu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-h3-ccu.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer-hdmi {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "mixer0-lcd0-hdmi";
+ clocks = <&display_clocks CLK_MIXER0>,
+ <&ccu CLK_TCON0>, <&ccu CLK_HDMI>;
+ status = "disabled";
+ };
+
+ framebuffer-tve {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "mixer1-lcd1-tve";
+ clocks = <&display_clocks CLK_MIXER1>,
+ <&ccu CLK_TVE>;
+ status = "disabled";
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc24M: osc24M_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-accuracy = <50000>;
+ clock-output-names = "osc24M";
+ };
+
+ osc32k: osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-accuracy = <50000>;
+ clock-output-names = "ext_osc32k";
+ };
+ };
+
+ de: display-engine {
+ compatible = "allwinner,sun8i-h3-display-engine";
+ allwinner,pipelines = <&mixer0>;
+ status = "disabled";
+ };
+
+ scpi_protocol: scpi {
+ compatible = "arm,scpi";
+ mboxes = <&msgbox 2>, <&msgbox 3>;
+ mbox-names = "tx", "rx";
+ shmem = <&scpi_sram>;
+ };
+
+ sound_hdmi: sound_hdmi {
+ compatible = "allwinner,sun9i-a80-hdmi-audio",
+ "allwinner,sun8i-h3-hdmi-audio";
+ status = "disabled";
+
+ codec {
+ sound-dai = <&hdmi>;
+ };
+
+ cpu {
+ sound-dai = <&i2s2>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ dma-ranges;
+ ranges;
+
+ display_clocks: clock@1000000 {
+ /* compatible is in per SoC .dtsi file */
+ reg = <0x01000000 0x10000>;
+ clocks = <&ccu CLK_BUS_DE>,
+ <&ccu CLK_DE>;
+ clock-names = "bus",
+ "mod";
+ resets = <&ccu RST_BUS_DE>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ mixer0: mixer@1100000 {
+ compatible = "allwinner,sun8i-h3-de2-mixer-0";
+ reg = <0x01100000 0x100000>;
+ clocks = <&display_clocks CLK_BUS_MIXER0>,
+ <&display_clocks CLK_MIXER0>;
+ clock-names = "bus",
+ "mod";
+ resets = <&display_clocks RST_MIXER0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mixer0_out: port@1 {
+ reg = <1>;
+
+ mixer0_out_tcon0: endpoint {
+ remote-endpoint = <&tcon0_in_mixer0>;
+ };
+ };
+ };
+ };
+
+ dma: dma-controller@1c02000 {
+ compatible = "allwinner,sun8i-h3-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+
+ tcon0: lcd-controller@1c0c000 {
+ compatible = "allwinner,sun8i-h3-tcon-tv",
+ "allwinner,sun8i-a83t-tcon-tv";
+ reg = <0x01c0c000 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+ clock-names = "ahb", "tcon-ch1";
+ resets = <&ccu RST_BUS_TCON0>;
+ reset-names = "lcd";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon0_in: port@0 {
+ reg = <0>;
+
+ tcon0_in_mixer0: endpoint {
+ remote-endpoint = <&mixer0_out_tcon0>;
+ };
+ };
+
+ tcon0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon0_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon0>;
+ };
+ };
+ };
+ };
+
+ mmc0: mmc@1c0f000 {
+ /* compatible and clocks are in per SoC .dtsi file */
+ reg = <0x01c0f000 0x1000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ resets = <&ccu RST_BUS_MMC0>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc@1c10000 {
+ /* compatible and clocks are in per SoC .dtsi file */
+ reg = <0x01c10000 0x1000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ resets = <&ccu RST_BUS_MMC1>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@1c11000 {
+ /* compatible and clocks are in per SoC .dtsi file */
+ reg = <0x01c11000 0x1000>;
+ resets = <&ccu RST_BUS_MMC2>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ sid: eeprom@1c14000 {
+ /* compatible is in per SoC .dtsi file */
+ reg = <0x1c14000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ths_calibration: thermal-sensor-calibration@34 {
+ reg = <0x34 4>;
+ };
+ };
+
+ msgbox: mailbox@1c17000 {
+ compatible = "allwinner,sun8i-h3-msgbox",
+ "allwinner,sun6i-a31-msgbox";
+ reg = <0x01c17000 0x1000>;
+ clocks = <&ccu CLK_BUS_MSGBOX>;
+ resets = <&ccu RST_BUS_MSGBOX>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ };
+
+ usb_otg: usb@1c19000 {
+ compatible = "allwinner,sun8i-h3-musb";
+ reg = <0x01c19000 0x400>;
+ clocks = <&ccu CLK_BUS_OTG>;
+ resets = <&ccu RST_BUS_OTG>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ extcon = <&usbphy 0>;
+ dr_mode = "otg";
+ status = "disabled";
+ };
+
+ usbphy: phy@1c19400 {
+ compatible = "allwinner,sun8i-h3-usb-phy";
+ reg = <0x01c19400 0x2c>,
+ <0x01c1a800 0x4>,
+ <0x01c1b800 0x4>,
+ <0x01c1c800 0x4>,
+ <0x01c1d800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu0",
+ "pmu1",
+ "pmu2",
+ "pmu3";
+ clocks = <&ccu CLK_USB_PHY0>,
+ <&ccu CLK_USB_PHY1>,
+ <&ccu CLK_USB_PHY2>,
+ <&ccu CLK_USB_PHY3>;
+ clock-names = "usb0_phy",
+ "usb1_phy",
+ "usb2_phy",
+ "usb3_phy";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>,
+ <&ccu RST_USB_PHY3>;
+ reset-names = "usb0_reset",
+ "usb1_reset",
+ "usb2_reset",
+ "usb3_reset";
+ status = "disabled";
+ #phy-cells = <1>;
+ };
+
+ ehci0: usb@1c1a000 {
+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+ reg = <0x01c1a000 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
+ resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci0: usb@1c1a400 {
+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+ reg = <0x01c1a400 0x100>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
+ <&ccu CLK_USB_OHCI0>;
+ resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci1: usb@1c1b000 {
+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+ reg = <0x01c1b000 0x100>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
+ resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci1: usb@1c1b400 {
+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+ reg = <0x01c1b400 0x100>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
+ <&ccu CLK_USB_OHCI1>;
+ resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci2: usb@1c1c000 {
+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+ reg = <0x01c1c000 0x100>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
+ resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci2: usb@1c1c400 {
+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+ reg = <0x01c1c400 0x100>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
+ <&ccu CLK_USB_OHCI2>;
+ resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci3: usb@1c1d000 {
+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+ reg = <0x01c1d000 0x100>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
+ resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
+ phys = <&usbphy 3>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci3: usb@1c1d400 {
+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+ reg = <0x01c1d400 0x100>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
+ <&ccu CLK_USB_OHCI3>;
+ resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
+ phys = <&usbphy 3>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ccu: clock@1c20000 {
+ /* compatible is in per SoC .dtsi file */
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pio: pinctrl@1c20800 {
+ /* compatible is in per SoC .dtsi file */
+ reg = <0x01c20800 0x400>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ csi_pins: csi-pins {
+ pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+ "PE6", "PE7", "PE8", "PE9", "PE10",
+ "PE11";
+ function = "csi";
+ };
+
+ emac_rgmii_pins: emac-rgmii-pins {
+ pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+ "PD5", "PD7", "PD8", "PD9", "PD10",
+ "PD12", "PD13", "PD15", "PD16", "PD17";
+ function = "emac";
+ drive-strength = <40>;
+ };
+
+ i2c0_pins: i2c0-pins {
+ pins = "PA11", "PA12";
+ function = "i2c0";
+ };
+
+ i2c1_pins: i2c1-pins {
+ pins = "PA18", "PA19";
+ function = "i2c1";
+ };
+
+ i2c2_pins: i2c2-pins {
+ pins = "PE12", "PE13";
+ function = "i2c2";
+ };
+
+ mmc0_pins: mmc0-pins {
+ pins = "PF0", "PF1", "PF2", "PF3",
+ "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pins = "PG0", "PG1", "PG2", "PG3",
+ "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc2_8bit_pins: mmc2-8bit-pins {
+ pins = "PC5", "PC6", "PC8",
+ "PC9", "PC10", "PC11",
+ "PC12", "PC13", "PC14",
+ "PC15", "PC16";
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ spdif_tx_pin: spdif-tx-pin {
+ pins = "PA17";
+ function = "spdif";
+ };
+
+ spi0_pins: spi0-pins {
+ pins = "PC0", "PC1", "PC2", "PC3";
+ function = "spi0";
+ };
+
+ spi1_pins: spi1-pins {
+ pins = "PA15", "PA16", "PA14", "PA13";
+ function = "spi1";
+ };
+
+ uart0_pa_pins: uart0-pa-pins {
+ pins = "PA4", "PA5";
+ function = "uart0";
+ };
+
+ uart1_pins: uart1-pins {
+ pins = "PG6", "PG7";
+ function = "uart1";
+ };
+
+ uart1_rts_cts_pins: uart1-rts-cts-pins {
+ pins = "PG8", "PG9";
+ function = "uart1";
+ };
+
+ uart2_pins: uart2-pins {
+ pins = "PA0", "PA1";
+ function = "uart2";
+ };
+
+ uart2_rts_cts_pins: uart2-rts-cts-pins {
+ pins = "PA2", "PA3";
+ function = "uart2";
+ };
+
+ uart3_pins: uart3-pins {
+ pins = "PA13", "PA14";
+ function = "uart3";
+ };
+
+ uart3_rts_cts_pins: uart3-rts-cts-pins {
+ pins = "PA15", "PA16";
+ function = "uart3";
+ };
+ };
+
+ timer@1c20c00 {
+ compatible = "allwinner,sun8i-a23-timer";
+ reg = <0x01c20c00 0xa0>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
+ };
+
+ emac: ethernet@1c30000 {
+ compatible = "allwinner,sun8i-h3-emac";
+ syscon = <&syscon>;
+ reg = <0x01c30000 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&ccu RST_BUS_EMAC>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu CLK_BUS_EMAC>;
+ clock-names = "stmmaceth";
+ status = "disabled";
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ };
+
+ mdio-mux {
+ compatible = "allwinner,sun8i-h3-mdio-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio-parent-bus = <&mdio>;
+ /* Only one MDIO is usable at the time */
+ internal_mdio: mdio@1 {
+ compatible = "allwinner,sun8i-h3-mdio-internal";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ int_mii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ clocks = <&ccu CLK_BUS_EPHY>;
+ resets = <&ccu RST_BUS_EPHY>;
+ };
+ };
+
+ external_mdio: mdio@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
+ mbus: dram-controller@1c62000 {
+ /* compatible is in per SoC .dtsi file */
+ reg = <0x01c62000 0x1000>,
+ <0x01c63000 0x1000>;
+ reg-names = "mbus", "dram";
+ clocks = <&ccu CLK_MBUS>,
+ <&ccu CLK_DRAM>,
+ <&ccu CLK_BUS_DRAM>;
+ clock-names = "mbus", "dram", "bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+ #interconnect-cells = <1>;
+ };
+
+ spi0: spi@1c68000 {
+ compatible = "allwinner,sun8i-h3-spi";
+ reg = <0x01c68000 0x1000>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 23>, <&dma 23>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ resets = <&ccu RST_BUS_SPI0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@1c69000 {
+ compatible = "allwinner,sun8i-h3-spi";
+ reg = <0x01c69000 0x1000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 24>, <&dma 24>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+ resets = <&ccu RST_BUS_SPI1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ wdt0: watchdog@1c20ca0 {
+ compatible = "allwinner,sun6i-a31-wdt";
+ reg = <0x01c20ca0 0x20>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
+ };
+
+ spdif: spdif@1c21000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-h3-spdif";
+ reg = <0x01c21000 0x400>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+ resets = <&ccu RST_BUS_SPDIF>;
+ clock-names = "apb", "spdif";
+ dmas = <&dma 2>;
+ dma-names = "tx";
+ status = "disabled";
+ };
+
+ pwm: pwm@1c21400 {
+ compatible = "allwinner,sun8i-h3-pwm";
+ reg = <0x01c21400 0x8>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ i2s0: i2s@1c22000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-h3-i2s";
+ reg = <0x01c22000 0x400>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 3>, <&dma 3>;
+ resets = <&ccu RST_BUS_I2S0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2s1: i2s@1c22400 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-h3-i2s";
+ reg = <0x01c22400 0x400>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 4>, <&dma 4>;
+ resets = <&ccu RST_BUS_I2S1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2s2: i2s@1c22800 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-h3-i2s";
+ reg = <0x01c22800 0x400>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 27>;
+ resets = <&ccu RST_BUS_I2S2>;
+ dma-names = "tx";
+ status = "disabled";
+ };
+
+ codec: codec@1c22c00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-h3-codec";
+ reg = <0x01c22c00 0x400>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+ clock-names = "apb", "codec";
+ resets = <&ccu RST_BUS_CODEC>;
+ dmas = <&dma 15>, <&dma 15>;
+ dma-names = "rx", "tx";
+ allwinner,codec-analog-controls = <&codec_analog>;
+ status = "disabled";
+ };
+
+ uart0: serial@1c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
+ dmas = <&dma 6>, <&dma 6>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart1: serial@1c28400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28400 0x400>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
+ dmas = <&dma 7>, <&dma 7>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart2: serial@1c28800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28800 0x400>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
+ dmas = <&dma 8>, <&dma 8>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart3: serial@1c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
+ dmas = <&dma 9>, <&dma 9>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c0: i2c@1c2ac00 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2ac00 0x400>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C0>;
+ resets = <&ccu RST_BUS_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@1c2b000 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b000 0x400>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C1>;
+ resets = <&ccu RST_BUS_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@1c2b400 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b400 0x400>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C2>;
+ resets = <&ccu RST_BUS_I2C2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gic: interrupt-controller@1c81000 {
+ compatible = "arm,gic-400";
+ reg = <0x01c81000 0x1000>,
+ <0x01c82000 0x2000>,
+ <0x01c84000 0x2000>,
+ <0x01c86000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ csi: camera@1cb0000 {
+ compatible = "allwinner,sun8i-h3-csi";
+ reg = <0x01cb0000 0x1000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CSI>,
+ <&ccu CLK_CSI_SCLK>,
+ <&ccu CLK_DRAM_CSI>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_CSI>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&csi_pins>;
+ status = "disabled";
+ };
+
+ hdmi: hdmi@1ee0000 {
+ compatible = "allwinner,sun8i-h3-dw-hdmi",
+ "allwinner,sun8i-a83t-dw-hdmi";
+ reg = <0x01ee0000 0x10000>;
+ reg-io-width = <1>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+ <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
+ clock-names = "iahb", "isfr", "tmds", "cec";
+ resets = <&ccu RST_BUS_HDMI1>;
+ reset-names = "ctrl";
+ phys = <&hdmi_phy>;
+ phy-names = "phy";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
+
+ hdmi_in_tcon0: endpoint {
+ remote-endpoint = <&tcon0_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ hdmi_phy: hdmi-phy@1ef0000 {
+ compatible = "allwinner,sun8i-h3-hdmi-phy";
+ reg = <0x01ef0000 0x10000>;
+ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+ <&ccu CLK_PLL_VIDEO>;
+ clock-names = "bus", "mod", "pll-0";
+ resets = <&ccu RST_BUS_HDMI0>;
+ reset-names = "phy";
+ #phy-cells = <0>;
+ };
+
+ rtc: rtc@1f00000 {
+ /* compatible is in per SoC .dtsi file */
+ reg = <0x01f00000 0x400>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ clock-output-names = "osc32k", "osc32k-out", "iosc";
+ clocks = <&osc32k>;
+ #clock-cells = <1>;
+ };
+
+ r_intc: interrupt-controller@1f00c00 {
+ compatible = "allwinner,sun8i-h3-r-intc",
+ "allwinner,sun6i-a31-r-intc";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x01f00c00 0x400>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ r_ccu: clock@1f01400 {
+ compatible = "allwinner,sun8i-h3-r-ccu";
+ reg = <0x01f01400 0x100>;
+ clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
+ <&ccu CLK_PLL_PERIPH0>;
+ clock-names = "hosc", "losc", "iosc", "pll-periph";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ codec_analog: codec-analog@1f015c0 {
+ compatible = "allwinner,sun8i-h3-codec-analog";
+ reg = <0x01f015c0 0x4>;
+ };
+
+ ir: ir@1f02000 {
+ compatible = "allwinner,sun6i-a31-ir";
+ clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+ clock-names = "apb", "ir";
+ resets = <&r_ccu RST_APB0_IR>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x01f02000 0x400>;
+ status = "disabled";
+ };
+
+ r_i2c: i2c@1f02400 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01f02400 0x400>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_i2c_pins>;
+ clocks = <&r_ccu CLK_APB0_I2C>;
+ resets = <&r_ccu RST_APB0_I2C>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ r_uart: serial@1f02800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01f02800 0x400>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&r_ccu CLK_APB0_UART>;
+ resets = <&r_ccu RST_APB0_UART>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+ };
+
+ r_pio: pinctrl@1f02c00 {
+ compatible = "allwinner,sun8i-h3-r-pinctrl";
+ reg = <0x01f02c00 0x400>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
+ <&rtc CLK_OSC32K>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ r_ir_rx_pin: r-ir-rx-pin {
+ pins = "PL11";
+ function = "s_cir_rx";
+ };
+
+ r_i2c_pins: r-i2c-pins {
+ pins = "PL0", "PL1";
+ function = "s_i2c";
+ };
+
+ r_pwm_pin: r-pwm-pin {
+ pins = "PL10";
+ function = "s_pwm";
+ };
+
+ r_uart_pins: r-uart-pins {
+ pins = "PL2", "PL3";
+ function = "s_uart";
+ };
+ };
+
+ r_pwm: pwm@1f03800 {
+ compatible = "allwinner,sun8i-h3-pwm";
+ reg = <0x01f03800 0x8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_pwm_pin>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+ };
+};
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/configs/repka-pi3_defconfig
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/configs/repka-pi3_defconfig (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/configs/repka-pi3_defconfig (revision 385)
@@ -0,0 +1,23 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-repka-pi3"
+CONFIG_SPL=y
+CONFIG_MACH_SUN50I_H5=y
+CONFIG_DRAM_CLK=672
+CONFIG_DRAM_ZQ=3881977
+CONFIG_SYS_CLK_FREQ=312000000
+# CONFIG_DRAM_ODT_EN is not set
+CONFIG_SPL_SPI_SUNXI=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x54000
+CONFIG_SPL_I2C=y
+CONFIG_SYS_PBSIZE=1024
+CONFIG_SYS_BOOTM_LEN=0x2000000
+# CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_SYS_I2C_SLAVE=0x7f
+CONFIG_SYS_I2C_SPEED=400000
+CONFIG_SUN8I_EMAC=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_MUSB_GADGET=y
Index: denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/drivers/power/Kconfig
===================================================================
--- denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/drivers/power/Kconfig (nonexistent)
+++ denx/create-2023.04-repka-pi3-patch/u-boot-2023.04-new/drivers/power/Kconfig (revision 385)
@@ -0,0 +1,483 @@
+menuconfig POWER
+ bool "Power"
+ default y
+ help
+ Enable support for power control in U-Boot. This includes support
+ for PMICs (Power-management Integrated Circuits) and some of the
+ features provided by PMICs. In particular, voltage regulators can
+ be used to enable/disable power and vary its voltage. That can be
+ useful in U-Boot to turn on boot peripherals and adjust CPU voltage
+ so that the clock speed can be increased. This enables the drivers
+ in drivers/power, drivers/power/pmic and drivers/power/regulator
+ as part of a build.
+
+if POWER
+
+config POWER_LEGACY
+ bool "Legacy power support"
+ help
+ Note: This is a legacy option. Use DM_PMIC instead.
+
+ Enable support for power control in U-Boot. This includes support
+ for PMICs (Power-management Integrated Circuits) and some of the
+ features provided by PMICs. In particular, voltage regulators can
+ be used to enable/disable power and vary its voltage. That can be
+ useful in U-Boot to turn on boot peripherals and adjust CPU voltage
+ so that the clock speed can be increased. This enables the drivers
+ in drivers/power, drivers/power/pmic and drivers/power/regulator
+ as part of a build.
+
+config SPL_POWER_LEGACY
+ bool "Legacy power support in SPL"
+ depends on SPL && !SPL_DM_PMIC
+ default y if POWER_LEGACY
+ help
+ Note: This is a legacy option. Use SPL_DM_PMIC instead.
+
+ Enable support for power control in SPL. This includes support
+ for PMICs (Power-management Integrated Circuits) and some of the
+ features provided by PMICs. In particular, voltage regulators can
+ be used to enable/disable power and vary its voltage. That can be
+ useful in SPL to turn on boot peripherals and adjust CPU voltage
+ so that the clock speed can be increased. This enables the drivers
+ in drivers/power, drivers/power/pmic and drivers/power/regulator
+ as part of a build.
+
+source "drivers/power/acpi_pmc/Kconfig"
+
+source "drivers/power/domain/Kconfig"
+
+source "drivers/power/pmic/Kconfig"
+
+source "drivers/power/regulator/Kconfig"
+
+choice
+ prompt "Select Sunxi PMIC Variant"
+ depends on ARCH_SUNXI
+ default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
+ default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40
+ default AXP305_POWER if MACH_SUN50I_H616
+ default AXP818_POWER if MACH_SUN8I_A83T
+ default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_V3S
+
+config SUNXI_NO_PMIC
+ bool "board without a pmic"
+ ---help---
+ Select this for boards which do not use a PMIC.
+
+config AXP152_POWER
+ bool "axp152 pmic support"
+ depends on MACH_SUN5I
+ select AXP_PMIC_BUS
+ select CMD_POWEROFF
+ ---help---
+ Select this to enable support for the axp152 pmic found on most
+ A10s boards.
+
+config AXP209_POWER
+ bool "axp209 pmic support"
+ depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I_V3S
+ select AXP_PMIC_BUS
+ select CMD_POWEROFF
+ ---help---
+ Select this to enable support for the axp209 pmic found on most
+ A10, A13 and A20 boards.
+
+config AXP221_POWER
+ bool "axp221 / axp223 pmic support"
+ depends on MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40 || MACH_SUNXI_H3_H5 || MACH_SUN50I
+ select AXP_PMIC_BUS
+ select CMD_POWEROFF
+ ---help---
+ Select this to enable support for the axp221/axp223 pmic found on most
+ A23 and A31 boards and Repka PI :))) .
+
+config AXP305_POWER
+ bool "axp305 pmic support"
+ depends on MACH_SUN50I_H616
+ select AXP_PMIC_BUS
+ select CMD_POWEROFF
+ ---help---
+ Select this to enable support for the axp305 pmic found on most
+ H616 boards.
+
+config AXP809_POWER
+ bool "axp809 pmic support"
+ depends on MACH_SUN9I
+ select AXP_PMIC_BUS
+ select CMD_POWEROFF
+ ---help---
+ Say y here to enable support for the axp809 pmic found on A80 boards.
+
+config AXP818_POWER
+ bool "axp818 pmic support"
+ depends on MACH_SUN8I_A83T
+ select AXP_PMIC_BUS
+ select CMD_POWEROFF
+ ---help---
+ Say y here to enable support for the axp818 pmic found on
+ A83T dev board.
+
+config SY8106A_POWER
+ bool "SY8106A pmic support"
+ depends on MACH_SUNXI_H3_H5
+ ---help---
+ Select this to enable support for the SY8106A pmic found on some
+ H3 boards.
+
+endchoice
+
+config AXP_DCDC1_VOLT
+ int "axp pmic dcdc1 voltage"
+ depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
+ default 3300 if AXP818_POWER || MACH_SUN8I_R40 || MACH_SUNXI_H3_H5 || MACH_SUN50I
+ default 3000 if MACH_SUN6I || MACH_SUN8I || MACH_SUN9I
+ ---help---
+ Set the voltage (mV) to program the axp pmic dcdc1 at, set to 0 to
+ disable dcdc1. On A23 / A31 / A33 (axp221) boards dcdc1 is used for
+ generic 3.3V IO voltage for external devices like the lcd-panal and
+ sdcard interfaces, etc. On most boards dcdc1 is undervolted to 3.0V to
+ save battery. On A31 devices dcdc1 is also used for VCC-IO. On A83T
+ dcdc1 is used for VCC-IO, nand, usb0, sd , etc. On A80 dcdc1 normally
+ powers some of the pingroups, NAND/eMMC, SD/MMC, and USB OTG.
+
+config AXP_DCDC2_VOLT
+ int "axp pmic dcdc2 voltage"
+ depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
+ default 900 if AXP818_POWER
+ default 1400 if AXP152_POWER || AXP209_POWER
+ default 1200 if MACH_SUN6I
+ default 1000 if MACH_SUN8I || MACH_SUNXI_H3_H5 || MACH_SUN50I
+ default 0 if MACH_SUN9I
+ ---help---
+ Set the voltage (mV) to program the axp pmic dcdc2 at, set to 0 to
+ disable dcdc2.
+ On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V.
+ On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V.
+ On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.1V.
+ On A80 boards dcdc2 powers the GPU and can be left off.
+ On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V.
+ On R40 boards dcdc2 is VDD-CPU and should be 1.1V
+
+config AXP_DCDC3_VOLT
+ int "axp pmic dcdc3 voltage"
+ depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
+ default 900 if AXP809_POWER || AXP818_POWER
+ default 1500 if AXP152_POWER
+ default 1250 if AXP209_POWER
+ default 1000 if MACH_SUN8I_R40 || MACH_SUNXI_H3_H5 || MACH_SUN50I
+ default 1200 if MACH_SUN6I || MACH_SUN8I
+ ---help---
+ Set the voltage (mV) to program the axp pmic dcdc3 at, set to 0 to
+ disable dcdc3.
+ On A10(s) / A13 / A20 boards with an axp209 dcdc3 is VDD-INT-DLL and
+ should be 1.25V.
+ On A10s boards with an axp152 dcdc3 is VCC-DRAM and should be 1.5V.
+ On A23 / A31 / A33 boards dcdc3 is VDD-CPU and should be 1.2V.
+ On A80 boards dcdc3 is used for VDD-CPUA(cluster 0) and should be 0.9V.
+ On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V.
+ On R40 boards dcdc3 is VDD-SYS and VDD-GPU and should be 1.1V.
+
+config AXP_DCDC4_VOLT
+ int "axp pmic dcdc4 voltage"
+ depends on AXP152_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP305_POWER
+ default 1250 if AXP152_POWER
+ default 1200 if MACH_SUN6I
+ default 0 if MACH_SUN8I || MACH_SUNXI_H3_H5 || MACH_SUN50I
+ default 900 if MACH_SUN9I
+ default 1500 if AXP305_POWER
+ ---help---
+ Set the voltage (mV) to program the axp pmic dcdc4 at, set to 0 to
+ disable dcdc4.
+ On A10s boards with an axp152 dcdc4 is VDD-INT-DLL and should be 1.25V.
+ On A31 boards dcdc4 is used for VDD-SYS and should be 1.2V.
+ On A23 / A33 boards dcdc4 is unused and should be disabled.
+ On A80 boards dcdc4 powers VDD-SYS, HDMI, USB OTG and should be 0.9V.
+ On A83T boards dcdc4 is used for VDD-GPU.
+ On H616 boards dcdcd is used for VCC-DRAM.
+
+config AXP_DCDC5_VOLT
+ int "axp pmic dcdc5 voltage"
+ depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
+ default 1500 if MACH_SUN6I || MACH_SUN8I || MACH_SUN9I || MACH_SUNXI_H3_H5 || MACH_SUN50I
+ ---help---
+ Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to
+ disable dcdc5.
+ On A23 / A31 / A33 / A80 / A83T / R40 boards dcdc5 is VCC-DRAM and
+ should be 1.5V, 1.35V if DDR3L is used.
+
+config AXP_ALDO1_VOLT
+ int "axp pmic (a)ldo1 voltage"
+ depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
+ default 0 if MACH_SUN6I || MACH_SUN8I_R40 || MACH_SUNXI_H3_H5 || MACH_SUN50I
+ default 1800 if MACH_SUN8I_A83T
+ default 3000 if MACH_SUN8I || MACH_SUN9I
+ ---help---
+ Set the voltage (mV) to program the axp pmic aldo1 at, set to 0 to
+ disable aldo1.
+ On A31 boards aldo1 is often used to power the wifi module.
+ On A23 / A33 boards aldo1 is used for VCC-IO and should be 3.0V.
+ On A80 boards aldo1 powers the USB hosts and should be 3.0V.
+ On A83T / H8 boards aldo1 is used for MIPI CSI, DSI, HDMI, EFUSE, and
+ should be 1.8V.
+
+config AXP_ALDO2_VOLT
+ int "axp pmic (a)ldo2 voltage"
+ depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
+ default 3000 if AXP152_POWER || AXP209_POWER
+ default 0 if MACH_SUN6I || MACH_SUN9I
+ default 1800 if MACH_SUN8I_A83T || MACH_SUNXI_H3_H5 || MACH_SUN50I
+ default 2500 if MACH_SUN8I
+ ---help---
+ Set the voltage (mV) to program the axp pmic aldo2 at, set to 0 to
+ disable aldo2.
+ On A10(s) / A13 / A20 boards aldo2 is AVCC and should be 3.0V.
+ On A31 boards aldo2 is typically unused and should be disabled.
+ On A31 boards aldo2 may be used for LPDDR2 then it should be 1.8V.
+ On A23 / A33 boards aldo2 is used for VDD-DLL and should be 2.5V.
+ On A80 boards aldo2 powers PB pingroup and camera IO and can be left off.
+ On A83T / H8 boards aldo2 powers VDD-DLL, VCC18-PLL, CPVDD, VDD18-ADC,
+ LPDDR2, and the codec. It should be 1.8V.
+
+config AXP_ALDO3_VOLT
+ int "axp pmic (a)ldo3 voltage"
+ depends on AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
+ default 0 if AXP209_POWER || MACH_SUN9I
+ default 3000 if MACH_SUN6I || MACH_SUN8I
+ default 3300 if MACH_SUNXI_H3_H5 || MACH_SUN50I
+ ---help---
+ Set the voltage (mV) to program the axp pmic aldo3 at, set to 0 to
+ disable aldo3.
+ On A10(s) / A13 / A20 boards aldo3 should be 2.8V.
+ On A23 / A31 / A33 / R40 boards aldo3 is VCC-PLL and AVCC and should
+ be 3.0V.
+ On A80 boards aldo3 is normally not used.
+ On A83T / H8 boards aldo3 is AVCC, VCC-PL, and VCC-LED, and should be
+ 3.0V.
+
+choice
+ prompt "axp pmic (a)ldo3 voltage rate control"
+ depends on AXP209_POWER
+ default AXP_ALDO3_VOLT_SLOPE_NONE
+ ---help---
+ The AXP can slowly ramp up voltage to reduce the inrush current when
+ changing voltages.
+ Note, this does not apply when enabling/disabling LDO3. See
+ "axp pmic (a)ldo3 inrush quirk" below to enable a slew rate to limit
+ inrush current on broken board designs.
+
+config AXP_ALDO3_VOLT_SLOPE_NONE
+ bool "No voltage slope"
+ ---help---
+ Tries to reach the next voltage setting near instantaneously. Measurements
+ indicate that this is about 0.0167 V/uS.
+
+config AXP_ALDO3_VOLT_SLOPE_16
+ bool "1.6 mV per uS"
+ ---help---
+ Increases the voltage by 1.6 mV per uS until the final voltage has
+ been reached. Note that the scaling is in 25 mV steps and thus
+ the slew rate in reality is about 25 mV/31.250 uS.
+
+config AXP_ALDO3_VOLT_SLOPE_08
+ bool "0.8 mV per uS"
+ ---help---
+ Increases the voltage by 0.8 mV per uS until the final voltage has
+ been reached. Note that the scaling is in 25 mV steps however and thus
+ the slew rate in reality is about 25 mV/15.625 uS.
+ This is the slowest supported rate.
+
+endchoice
+
+config AXP_ALDO3_INRUSH_QUIRK
+ bool "axp pmic (a)ldo3 inrush quirk"
+ depends on AXP209_POWER
+ ---help---
+ The reference design denotes a value of 4.7 uF for the output capacitor
+ of LDO3. Some boards have too high capacitance causing an inrush current
+ and resulting an AXP209 shutdown.
+
+config AXP_ALDO4_VOLT
+ int "axp pmic (a)ldo4 voltage"
+ depends on AXP209_POWER
+ default 0 if AXP209_POWER
+ ---help---
+ Set the voltage (mV) to program the axp pmic aldo4 at, set to 0 to
+ disable aldo4.
+ On A10(s) / A13 / A20 boards aldo4 should be 2.8V.
+
+config AXP_DLDO1_VOLT
+ int "axp pmic dldo1 voltage"
+ depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
+ default 0
+ ---help---
+ Set the voltage (mV) to program the axp pmic dldo1 at, set to 0 to
+ disable dldo1. On sun6i (A31) boards with ethernet dldo1 is often used
+ to power the ethernet phy. On A23, A33 and A80 boards this is often
+ used to power the wifi.
+
+config AXP_DLDO2_VOLT
+ int "axp pmic dldo2 voltage"
+ depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
+ default 3000 if MACH_SUN9I
+ default 0
+ ---help---
+ Set the voltage (mV) to program the axp pmic dldo2 at, set to 0 to
+ disable dldo2.
+ On A80 boards dldo2 normally powers the PL pins and should be 3.0V.
+
+config AXP_DLDO3_VOLT
+ int "axp pmic dldo3 voltage"
+ depends on AXP221_POWER || AXP818_POWER
+ default 0
+ ---help---
+ Set the voltage (mV) to program the axp pmic dldo3 at, set to 0 to
+ disable dldo3.
+
+config AXP_DLDO4_VOLT
+ int "axp pmic dldo4 voltage"
+ depends on AXP221_POWER || AXP818_POWER
+ default 0
+ ---help---
+ Set the voltage (mV) to program the axp pmic dldo4 at, set to 0 to
+ disable dldo4.
+
+config AXP_ELDO1_VOLT
+ int "axp pmic eldo1 voltage"
+ depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
+ default 0
+ ---help---
+ Set the voltage (mV) to program the axp pmic eldo1 at, set to 0 to
+ disable eldo1.
+
+config AXP_ELDO2_VOLT
+ int "axp pmic eldo2 voltage"
+ depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
+ default 0
+ ---help---
+ Set the voltage (mV) to program the axp pmic eldo2 at, set to 0 to
+ disable eldo2.
+
+config AXP_ELDO3_VOLT
+ int "axp pmic eldo3 voltage"
+ depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
+ default 3000 if MACH_SUN9I
+ default 0
+ ---help---
+ Set the voltage (mV) to program the axp pmic eldo3 at, set to 0 to
+ disable eldo3. On some A31(s) tablets it might be used to supply
+ 1.2V for the SSD2828 chip (converter of parallel LCD interface
+ into MIPI DSI).
+ On A80 boards it powers the PM pingroup and should be 3.0V.
+
+config AXP_FLDO1_VOLT
+ int "axp pmic fldo1 voltage"
+ depends on AXP818_POWER
+ default 0 if MACH_SUN8I_A83T
+ ---help---
+ Set the voltage (mV) to program the axp pmic fldo1 at, set to 0 to
+ disable fldo1.
+ On A83T / H8 boards fldo1 is VCC-HSIC and should be 1.2V if HSIC is
+ used.
+
+config AXP_FLDO2_VOLT
+ int "axp pmic fldo2 voltage"
+ depends on AXP818_POWER
+ default 900 if MACH_SUN8I_A83T
+ ---help---
+ Set the voltage (mV) to program the axp pmic fldo2 at, set to 0 to
+ disable fldo2.
+ On A83T / H8 boards fldo2 is VCC-CPUS and should be 0.9V.
+
+config AXP_FLDO3_VOLT
+ int "axp pmic fldo3 voltage"
+ depends on AXP818_POWER
+ default 0
+ ---help---
+ Set the voltage (mV) to program the axp pmic fldo3 at, set to 0 to
+ disable fldo3.
+
+config AXP_SW_ON
+ bool "axp pmic sw on"
+ depends on AXP809_POWER || AXP818_POWER
+ ---help---
+ Enable to turn on axp pmic sw.
+
+config SY8106A_VOUT1_VOLT
+ int "SY8106A pmic VOUT1 voltage"
+ depends on SY8106A_POWER
+ default 1200
+ ---help---
+ Set the voltage (mV) to program the SY8106A pmic VOUT1. This
+ is typically used to power the VDD-CPU and should be 1200mV.
+ Values can range from 680mV till 1950mV.
+
+config TPS6586X_POWER
+ bool "Enable legacy driver for TI TPS6586x power management chip"
+
+config TWL4030_POWER
+ depends on OMAP34XX
+ bool "Enable driver for TI TWL4030 power management chip"
+ imply CMD_POWEROFF
+ ---help---
+ The TWL4030 in a combination audio CODEC/power management with
+ GPIO and it is commonly used with the OMAP3 family of processors
+
+config TWL6030_POWER
+ depends on OMAP44XX
+ bool "Enable driver for TI TWL6030 power management chip"
+
+config POWER_MT6323
+ bool "Poweroff driver for mediatek mt6323"
+ select CMD_POWEROFF
+ help
+ This adds poweroff driver for mt6323
+ this pmic is used on mt7623 / Bananapi R2
+
+config PALMAS_POWER
+ bool "Palmas power support"
+ depends on OMAP54XX
+
+config POWER_FSL
+ bool "Power control (legacy) for Freescale / NXP platforms"
+ depends on POWER_LEGACY
+
+config POWER_I2C
+ bool "I2C-based power control for legacy power"
+ depends on POWER_LEGACY
+ help
+ Enable this to use the I2C driver designed for the legacy PMIC
+ interface.
+
+ Not to be used for new designs and existing ones should be moved to
+ the new PMIC interface based on driver model.
+
+config POWER_SPI
+ bool "SPI-based power control for legacy power_fsl driver"
+ depends on POWER_FSL && !POWER_I2C
+
+config SPL_POWER_I2C
+ bool "I2C-based power control for legacy power"
+ depends on SPL_POWER_LEGACY
+ default y if POWER_I2C
+ help
+ Enable this to use the I2C driver designed for the legacy PMIC
+ interface.
+
+ Not to be used for new designs and existing ones should be moved to
+ the new PMIC interface based on driver model.
+
+choice
+ prompt "PMIC chip"
+ default POWER_FSL_MC13892
+ depends on POWER_FSL && POWER_I2C
+
+config POWER_FSL_MC13892
+ bool "MC13892"
+
+config POWER_FSL_MC34704
+ bool "MC34704"
+
+endchoice
+
+endif
Index: denx/create-2023.07-orange-pi5-patch/create.patch.sh
===================================================================
--- denx/create-2023.07-orange-pi5-patch/create.patch.sh (nonexistent)
+++ denx/create-2023.07-orange-pi5-patch/create.patch.sh (revision 385)
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+VERSION=2023.07
+
+tar --files-from=file.list -xjvf ../u-boot-$VERSION.tar.bz2
+mv u-boot-$VERSION u-boot-$VERSION-orig
+
+cp -rf ./u-boot-$VERSION-new ./u-boot-$VERSION
+
+diff --unified -Nr u-boot-$VERSION-orig u-boot-$VERSION > u-boot-$VERSION-orange-pi5.patch
+
+mv u-boot-$VERSION-orange-pi5.patch ../patches
+
+rm -rf ./u-boot-$VERSION
+rm -rf ./u-boot-$VERSION-orig
Property changes on: denx/create-2023.07-orange-pi5-patch/create.patch.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: denx/create-2023.07-orange-pi5-patch/file.list
===================================================================
--- denx/create-2023.07-orange-pi5-patch/file.list (nonexistent)
+++ denx/create-2023.07-orange-pi5-patch/file.list (revision 385)
@@ -0,0 +1,2 @@
+u-boot-2023.07/arch/arm/dts/Makefile
+u-boot-2023.07/arch/arm/dts/rk3588.dtsi
Index: denx/create-2023.07-orange-pi5-patch/u-boot-2023.07-new/arch/arm/dts/Makefile
===================================================================
--- denx/create-2023.07-orange-pi5-patch/u-boot-2023.07-new/arch/arm/dts/Makefile (nonexistent)
+++ denx/create-2023.07-orange-pi5-patch/u-boot-2023.07-new/arch/arm/dts/Makefile (revision 385)
@@ -0,0 +1,1399 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+dtb-$(CONFIG_TARGET_SMARTWEB) += at91sam9260-smartweb.dtb
+dtb-$(CONFIG_TARGET_TAURUS) += at91sam9g20-taurus.dtb
+dtb-$(CONFIG_TARGET_CORVUS) += at91sam9g45-corvus.dtb
+dtb-$(CONFIG_TARGET_GURNARD) += at91sam9g45-gurnard.dtb
+
+dtb-$(CONFIG_TARGET_SMDKC100) += s5pc1xx-smdkc100.dtb
+dtb-$(CONFIG_TARGET_S5P_GONI) += s5pc1xx-goni.dtb
+dtb-$(CONFIG_ARCH_EXYNOS4) += exynos4210-origen.dtb \
+ exynos4210-smdkv310.dtb \
+ exynos4210-universal_c210.dtb \
+ exynos4210-trats.dtb \
+ exynos4412-trats2.dtb \
+ exynos4412-odroid.dtb
+
+dtb-$(CONFIG_TARGET_HIKEY) += hi6220-hikey.dtb
+dtb-$(CONFIG_TARGET_HIKEY960) += hi3660-hikey960.dtb
+
+dtb-$(CONFIG_TARGET_POPLAR) += hi3798cv200-poplar.dtb
+
+dtb-$(CONFIG_ARCH_EXYNOS5) += exynos5250-arndale.dtb \
+ exynos5250-snow.dtb \
+ exynos5250-spring.dtb \
+ exynos5250-smdk5250.dtb \
+ exynos5420-smdk5420.dtb \
+ exynos5420-peach-pit.dtb \
+ exynos5800-peach-pi.dtb \
+ exynos5422-odroidxu3.dtb
+dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb
+dtb-$(CONFIG_TARGET_A5Y17LTE) += exynos78x0-axy17lte.dtb
+dtb-$(CONFIG_TARGET_A3Y17LTE) += exynos78x0-axy17lte.dtb
+dtb-$(CONFIG_TARGET_A7Y17LTE) += exynos78x0-axy17lte.dtb
+
+dtb-$(CONFIG_ARCH_APPLE) += \
+ t8103-j274.dtb \
+ t8103-j293.dtb \
+ t8103-j313.dtb \
+ t8103-j456.dtb \
+ t8103-j457.dtb
+
+dtb-$(CONFIG_ARCH_DAVINCI) += \
+ da850-evm.dtb \
+ da850-lcdk.dtb \
+ da850-lego-ev3.dtb
+
+dtb-$(CONFIG_ARCH_KIRKWOOD) += \
+ kirkwood-atl-sbx81lifkw.dtb \
+ kirkwood-atl-sbx81lifxcat.dtb \
+ kirkwood-blackarmor-nas220.dtb \
+ kirkwood-d2net.dtb \
+ kirkwood-dns325.dtb \
+ kirkwood-dockstar.dtb \
+ kirkwood-dreamplug.dtb \
+ kirkwood-ds109.dtb \
+ kirkwood-goflexnet.dtb \
+ kirkwood-guruplug-server-plus.dtb \
+ kirkwood-ib62x0.dtb \
+ kirkwood-iconnect.dtb \
+ kirkwood-is2.dtb \
+ kirkwood-lsxhl.dtb \
+ kirkwood-lschlv2.dtb \
+ kirkwood-net2big.dtb \
+ kirkwood-ns2.dtb \
+ kirkwood-ns2lite.dtb \
+ kirkwood-ns2max.dtb \
+ kirkwood-ns2mini.dtb \
+ kirkwood-nsa310s.dtb \
+ kirkwood-openrd-base.dtb \
+ kirkwood-openrd-client.dtb \
+ kirkwood-openrd-ultimate.dtb \
+ kirkwood-pogo_e02.dtb \
+ kirkwood-pogoplug-series-4.dtb \
+ kirkwood-sheevaplug.dtb
+
+dtb-$(CONFIG_MACH_S900) += \
+ bubblegum_96.dtb
+dtb-$(CONFIG_MACH_S700) += \
+ s700-cubieboard7.dtb
+
+dtb-$(CONFIG_ROCKCHIP_PX30) += \
+ px30-evb.dtb \
+ px30-firefly.dtb \
+ px30-engicam-px30-core-ctouch2.dtb \
+ px30-engicam-px30-core-ctouch2-of10.dtb \
+ px30-engicam-px30-core-edimm2.2.dtb \
+ rk3326-odroid-go2.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3036) += \
+ rk3036-sdk.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3066) += \
+ rk3066a-mk808.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3128) += \
+ rk3128-evb.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3188) += \
+ rk3188-radxarock.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK322X) += \
+ rk3229-evb.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3288) += \
+ rk3288-evb.dtb \
+ rk3288-firefly.dtb \
+ rk3288-miqi.dtb \
+ rk3288-phycore-rdk.dtb \
+ rk3288-popmetal.dtb \
+ rk3288-rock2-square.dtb \
+ rk3288-rock-pi-n8.dtb \
+ rk3288-tinker.dtb \
+ rk3288-tinker-s.dtb \
+ rk3288-veyron-jerry.dtb \
+ rk3288-veyron-mickey.dtb \
+ rk3288-veyron-minnie.dtb \
+ rk3288-veyron-speedy.dtb \
+ rk3288-vyasa.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3308) += \
+ rk3308-evb.dtb \
+ rk3308-roc-cc.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3328) += \
+ rk3328-evb.dtb \
+ rk3328-nanopi-r2c.dtb \
+ rk3328-nanopi-r2s.dtb \
+ rk3328-roc-cc.dtb \
+ rk3328-rock64.dtb \
+ rk3328-rock-pi-e.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3368) += \
+ rk3368-lion-haikou.dtb \
+ rk3368-sheep.dtb \
+ rk3368-geekbox.dtb \
+ rk3368-px5-evb.dtb \
+
+dtb-$(CONFIG_ROCKCHIP_RK3399) += \
+ rk3399-evb.dtb \
+ rk3399-eaidk-610.dtb \
+ rk3399-ficus.dtb \
+ rk3399-firefly.dtb \
+ rk3399-gru-bob.dtb \
+ rk3399-gru-kevin.dtb \
+ rk3399-khadas-edge.dtb \
+ rk3399-khadas-edge-captain.dtb \
+ rk3399-khadas-edge-v.dtb \
+ rk3399-leez-p710.dtb \
+ rk3399-nanopc-t4.dtb \
+ rk3399-nanopi-m4.dtb \
+ rk3399-nanopi-m4-2gb.dtb \
+ rk3399-nanopi-m4b.dtb \
+ rk3399-nanopi-neo4.dtb \
+ rk3399-nanopi-r4s.dtb \
+ rk3399-orangepi.dtb \
+ rk3399-pinebook-pro.dtb \
+ rk3399-pinephone-pro.dtb \
+ rk3399-puma-haikou.dtb \
+ rk3399-roc-pc.dtb \
+ rk3399-roc-pc-mezzanine.dtb \
+ rk3399-rock-4c-plus.dtb \
+ rk3399-rock-pi-4a.dtb \
+ rk3399-rock-pi-4c.dtb \
+ rk3399-rock960.dtb \
+ rk3399-rockpro64.dtb \
+ rk3399pro-rock-pi-n10.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3568) += \
+ rk3566-anbernic-rgxx3.dtb \
+ rk3566-radxa-cm3-io.dtb \
+ rk3568-evb.dtb \
+ rk3568-rock-3a.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3588) += \
+ rk3588-edgeble-neu6a-io.dtb \
+ rk3588-evb1-v10.dtb \
+ rk3588-rock-5b.dtb \
+ rk3588s-orangepi-5.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RV1108) += \
+ rv1108-elgin-r1.dtb \
+ rv1108-evb.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RV1126) += \
+ rv1126-edgeble-neu2-io.dtb
+
+dtb-$(CONFIG_ARCH_S5P4418) += \
+ s5p4418-nanopi2.dtb
+
+dtb-$(CONFIG_ARCH_MESON) += \
+ meson-axg-s400.dtb \
+ meson-axg-jethome-jethub-j100.dtb \
+ meson-gxbb-nanopi-k2.dtb \
+ meson-gxbb-odroidc2.dtb \
+ meson-gxbb-nanopi-k2.dtb \
+ meson-gxbb-p200.dtb \
+ meson-gxbb-p201.dtb \
+ meson-gxbb-wetek-hub.dtb \
+ meson-gxbb-wetek-play2.dtb \
+ meson-gxl-s805x-libretech-ac.dtb \
+ meson-gxl-s905d-libretech-pc.dtb \
+ meson-gxl-s905w-jethome-jethub-j80.dtb \
+ meson-gxl-s905x-khadas-vim.dtb \
+ meson-gxl-s905x-libretech-cc.dtb \
+ meson-gxl-s905x-libretech-cc-v2.dtb \
+ meson-gxl-s905x-p212.dtb \
+ meson-gxm-gt1-ultimate.dtb \
+ meson-gxm-khadas-vim2.dtb \
+ meson-gxm-s912-libretech-pc.dtb \
+ meson-gxm-wetek-core2.dtb \
+ meson-g12a-radxa-zero.dtb \
+ meson-g12a-sei510.dtb \
+ meson-g12a-u200.dtb \
+ meson-g12b-a311d-bananapi-m2s.dtb \
+ meson-g12b-a311d-khadas-vim3.dtb \
+ meson-g12b-bananapi-cm4-cm4io.dtb \
+ meson-g12b-gsking-x.dtb \
+ meson-g12b-gtking.dtb \
+ meson-g12b-gtking-pro.dtb \
+ meson-g12b-odroid-go-ultra.dtb \
+ meson-g12b-odroid-n2.dtb \
+ meson-g12b-odroid-n2l.dtb \
+ meson-g12b-odroid-n2-plus.dtb \
+ meson-g12b-radxa-zero2.dtb \
+ meson-sm1-bananapi-m2-pro.dtb \
+ meson-sm1-bananapi-m5.dtb \
+ meson-sm1-khadas-vim3l.dtb \
+ meson-sm1-odroid-c4.dtb \
+ meson-sm1-odroid-hc4.dtb \
+ meson-sm1-sei610.dtb
+dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
+ tegra20-medcom-wide.dtb \
+ tegra20-paz00.dtb \
+ tegra20-plutux.dtb \
+ tegra20-seaboard.dtb \
+ tegra20-tec.dtb \
+ tegra20-trimslice.dtb \
+ tegra20-ventana.dtb \
+ tegra20-colibri.dtb \
+ tegra30-apalis.dtb \
+ tegra30-beaver.dtb \
+ tegra30-cardhu.dtb \
+ tegra30-colibri.dtb \
+ tegra30-tec-ng.dtb \
+ tegra114-dalmore.dtb \
+ tegra124-apalis.dtb \
+ tegra124-jetson-tk1.dtb \
+ tegra124-nyan-big.dtb \
+ tegra124-cei-tk1-som.dtb \
+ tegra124-venice2.dtb \
+ tegra186-p2771-0000-000.dtb \
+ tegra186-p2771-0000-500.dtb \
+ tegra210-p2371-0000.dtb \
+ tegra210-p2371-2180.dtb \
+ tegra210-p2571.dtb \
+ tegra210-p3450-0000.dtb
+
+ifdef CONFIG_ARMADA_32BIT
+ifdef CONFIG_ARMADA_375
+dtb-$(CONFIG_ARCH_MVEBU) += \
+ armada-375-db.dtb
+else
+dtb-$(CONFIG_ARCH_MVEBU) += \
+ armada-385-atl-x530.dtb \
+ armada-385-atl-x530DP.dtb \
+ armada-385-db-88f6820-amc.dtb \
+ armada-385-synology-ds116.dtb \
+ armada-385-thecus-n2350.dtb \
+ armada-385-turris-omnia.dtb \
+ armada-388-clearfog.dtb \
+ armada-388-gp.dtb \
+ armada-388-helios4.dtb \
+ armada-38x-controlcenterdc.dtb \
+ armada-xp-crs305-1g-4s.dtb \
+ armada-xp-crs305-1g-4s-bit.dtb \
+ armada-xp-crs326-24g-2s.dtb \
+ armada-xp-crs326-24g-2s-bit.dtb \
+ armada-xp-crs328-4c-20s-4s.dtb \
+ armada-xp-crs328-4c-20s-4s-bit.dtb \
+ armada-xp-db-xc3-24g4xg.dtb \
+ armada-xp-gp.dtb \
+ armada-xp-maxbcm.dtb \
+ armada-xp-synology-ds414.dtb \
+ armada-xp-theadorable.dtb
+endif
+else
+dtb-$(CONFIG_ARCH_MVEBU) += \
+ armada-3720-db.dtb \
+ armada-3720-espressobin.dtb \
+ armada-3720-turris-mox.dtb \
+ armada-3720-eDPU.dtb \
+ armada-3720-uDPU.dtb \
+ armada-7040-db-nand.dtb \
+ armada-7040-db.dtb \
+ armada-8040-clearfog-gt-8k.dtb \
+ armada-8040-db.dtb \
+ armada-8040-mcbin.dtb \
+ armada-8040-puzzle-m801.dtb \
+ cn9130-db-A.dtb \
+ cn9130-db-B.dtb \
+ cn9131-db-A.dtb \
+ cn9131-db-B.dtb \
+ cn9132-db-A.dtb \
+ cn9132-db-B.dtb \
+ cn9130-crb-A.dtb \
+ cn9130-crb-B.dtb \
+ ac5-98dx35xx-rd.dtb
+endif
+
+dtb-$(CONFIG_ARCH_SYNQUACER) += synquacer-sc2a11-developerbox.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_LD11) += \
+ uniphier-ld11-global.dtb \
+ uniphier-ld11-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_LD20) += \
+ uniphier-ld20-akebi96.dtb \
+ uniphier-ld20-global.dtb \
+ uniphier-ld20-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_LD4) += \
+ uniphier-ld4-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_LD6B) += \
+ uniphier-ld6b-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_PRO4) += \
+ uniphier-pro4-ace.dtb \
+ uniphier-pro4-ref.dtb \
+ uniphier-pro4-sanji.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_PRO5) += \
+ uniphier-pro5-4kbox.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_PXS2) += \
+ uniphier-pxs2-gentil.dtb \
+ uniphier-pxs2-vodka.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_PXS3) += \
+ uniphier-pxs3-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_SLD8) += \
+ uniphier-sld8-ref.dtb
+
+dtb-$(CONFIG_ARCH_ZYNQ) += \
+ bitmain-antminer-s9.dtb \
+ zynq-cc108.dtb \
+ zynq-cse-nand.dtb \
+ zynq-cse-nor.dtb \
+ zynq-cse-qspi-single.dtb \
+ zynq-dlc20-rev1.0.dtb \
+ zynq-microzed.dtb \
+ zynq-minized.dtb \
+ zynq-picozed.dtb \
+ zynq-syzygy-hub.dtb \
+ zynq-topic-miami.dtb \
+ zynq-topic-miamilite.dtb \
+ zynq-topic-miamiplus.dtb \
+ zynq-zc702.dtb \
+ zynq-zc706.dtb \
+ zynq-zc770-xm010.dtb \
+ zynq-zc770-xm011.dtb \
+ zynq-zc770-xm011-x16.dtb \
+ zynq-zc770-xm012.dtb \
+ zynq-zc770-xm013.dtb \
+ zynq-zed.dtb \
+ zynq-zturn.dtb \
+ zynq-zturn-v5.dtb \
+ zynq-zybo.dtb \
+ zynq-zybo-z7.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += \
+ avnet-ultra96-rev1.dtb \
+ zynqmp-a2197-revA.dtb \
+ zynqmp-dlc21-revA.dtb \
+ zynqmp-e-a2197-00-revA.dtb \
+ zynqmp-g-a2197-00-revA.dtb \
+ zynqmp-m-a2197-01-revA.dtb \
+ zynqmp-m-a2197-02-revA.dtb \
+ zynqmp-m-a2197-03-revA.dtb \
+ zynqmp-p-a2197-00-revA.dtb \
+ zynqmp-mini.dtb \
+ zynqmp-mini-emmc0.dtb \
+ zynqmp-mini-emmc1.dtb \
+ zynqmp-mini-nand.dtb \
+ zynqmp-mini-qspi.dtb \
+ zynqmp-sm-k24-revA.dtb \
+ zynqmp-smk-k24-revA.dtb \
+ zynqmp-sm-k26-revA.dtb \
+ zynqmp-smk-k26-revA.dtb \
+ zynqmp-sck-kr-g-revA.dtbo \
+ zynqmp-sck-kr-g-revB.dtbo \
+ zynqmp-sck-kv-g-revA.dtbo \
+ zynqmp-sck-kv-g-revB.dtbo \
+ zynqmp-topic-miamimp-xilinx-xdp-v1r1.dtb \
+ zynqmp-zcu100-revC.dtb \
+ zynqmp-zcu102-revA.dtb \
+ zynqmp-zcu102-revB.dtb \
+ zynqmp-zcu102-rev1.0.dtb \
+ zynqmp-zcu102-rev1.1.dtb \
+ zynqmp-zcu104-revA.dtb \
+ zynqmp-zcu104-revC.dtb \
+ zynqmp-zcu106-revA.dtb \
+ zynqmp-zcu106-rev1.0.dtb \
+ zynqmp-zcu111-revA.dtb \
+ zynqmp-zcu1275-revA.dtb \
+ zynqmp-zcu1275-revB.dtb \
+ zynqmp-zcu1285-revA.dtb \
+ zynqmp-zcu208-revA.dtb \
+ zynqmp-zcu216-revA.dtb \
+ zynqmp-zc1232-revA.dtb \
+ zynqmp-zc1254-revA.dtb \
+ zynqmp-zc1751-xm015-dc1.dtb \
+ zynqmp-zc1751-xm016-dc2.dtb \
+ zynqmp-zc1751-xm017-dc3.dtb \
+ zynqmp-zc1751-xm018-dc4.dtb \
+ zynqmp-zc1751-xm019-dc5.dtb
+dtb-$(CONFIG_ARCH_VERSAL) += \
+ versal-mini.dtb \
+ versal-mini-emmc0.dtb \
+ versal-mini-emmc1.dtb \
+ versal-mini-ospi-single.dtb \
+ versal-mini-qspi-single.dtb \
+ xilinx-versal-virt.dtb
+dtb-$(CONFIG_ARCH_VERSAL_NET) += \
+ versal-net-mini.dtb \
+ xilinx-versal-net-virt.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP_R5) += \
+ zynqmp-r5.dtb
+dtb-$(CONFIG_AM33XX) += \
+ am335x-baltos.dtb \
+ am335x-bone.dtb \
+ am335x-boneblack.dtb \
+ am335x-boneblack-wireless.dtb \
+ am335x-boneblue.dtb \
+ am335x-brppt1-mmc.dtb \
+ am335x-brxre1.dtb \
+ am335x-brsmarc1.dtb \
+ am335x-draco.dtb \
+ am335x-evm.dtb \
+ am335x-evmsk.dtb \
+ am335x-bonegreen.dtb \
+ am335x-bonegreen-wireless.dtb \
+ am335x-icev2.dtb \
+ am335x-pocketbeagle.dtb \
+ am335x-pxm50.dtb \
+ am335x-rut.dtb \
+ am335x-sancloud-bbe.dtb \
+ am335x-sancloud-bbe-lite.dtb \
+ am335x-sancloud-bbe-extended-wifi.dtb \
+ am335x-shc.dtb \
+ am335x-pdu001.dtb \
+ am335x-chiliboard.dtb \
+ am335x-sl50.dtb \
+ am335x-base0033.dtb \
+ am335x-guardian.dtb \
+ am335x-wega-rdk.dtb \
+ am335x-regor-rdk.dtb
+dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb \
+ am43x-epos-evm.dtb \
+ am437x-idk-evm.dtb \
+ am4372-generic.dtb \
+ am437x-cm-t43.dtb
+dtb-$(CONFIG_TARGET_AM3517_EVM) += am3517-evm.dtb
+dtb-$(CONFIG_TI816X) += dm8168-evm.dtb
+dtb-$(CONFIG_TARGET_THUNDERX_88XX) += thunderx-88xx.dtb
+
+dtb-$(CONFIG_ARCH_SOCFPGA) += \
+ socfpga_agilex_socdk.dtb \
+ socfpga_arria5_secu1.dtb \
+ socfpga_arria5_socdk.dtb \
+ socfpga_arria10_chameleonv3_270_2.dtb \
+ socfpga_arria10_chameleonv3_270_3.dtb \
+ socfpga_arria10_chameleonv3_480_2.dtb \
+ socfpga_arria10_socdk_sdmmc.dtb \
+ socfpga_cyclone5_mcvevk.dtb \
+ socfpga_cyclone5_is1.dtb \
+ socfpga_cyclone5_socdk.dtb \
+ socfpga_cyclone5_dbm_soc1.dtb \
+ socfpga_cyclone5_de0_nano_soc.dtb \
+ socfpga_cyclone5_de1_soc.dtb \
+ socfpga_cyclone5_de10_nano.dtb \
+ socfpga_cyclone5_sockit.dtb \
+ socfpga_cyclone5_socrates.dtb \
+ socfpga_cyclone5_sr1500.dtb \
+ socfpga_cyclone5_vining_fpga.dtb \
+ socfpga_n5x_socdk.dtb \
+ socfpga_stratix10_socdk.dtb
+
+dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dra7-evm.dtb \
+ dra72-evm-revc.dtb dra71-evm.dtb dra76-evm.dtb
+dtb-$(CONFIG_TARGET_AM57XX_EVM) += am57xx-beagle-x15.dtb \
+ am57xx-beagle-x15-revb1.dtb \
+ am57xx-beagle-x15-revc.dtb \
+ am5729-beagleboneai.dtb \
+ am574x-idk.dtb \
+ am572x-idk.dtb \
+ am571x-idk.dtb
+dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
+
+dtb-$(CONFIG_ARCH_LS1021A) += ls1021a-qds-duart.dtb \
+ ls1021a-qds-lpuart.dtb \
+ ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb \
+ ls1021a-iot-duart.dtb ls1021a-tsn.dtb
+dtb-$(CONFIG_TARGET_PG_WCOM_SELI8) += ls1021a-pg-wcom-seli8.dtb
+dtb-$(CONFIG_TARGET_PG_WCOM_EXPU1) += ls1021a-pg-wcom-expu1.dtb
+
+dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
+ fsl-ls2080a-qds-42-x.dtb \
+ fsl-ls2080a-rdb.dtb \
+ fsl-ls2081a-rdb.dtb \
+ fsl-ls2088a-rdb-qspi.dtb \
+ fsl-ls1088a-rdb.dtb \
+ fsl-ls1088a-qds.dtb \
+ fsl-ls1088a-qds-21-x.dtb \
+ fsl-ls1088a-qds-29-x.dtb \
+ fsl-ls1028a-rdb.dtb \
+ fsl-ls1028a-qds-duart.dtb \
+ fsl-ls1028a-qds-lpuart.dtb \
+ fsl-lx2160a-rdb.dtb \
+ fsl-lx2160a-qds.dtb \
+ fsl-lx2160a-qds-3-x-x.dtb \
+ fsl-lx2160a-qds-3-11-x.dtb \
+ fsl-lx2160a-qds-7-x-x.dtb \
+ fsl-lx2160a-qds-7-11-x.dtb \
+ fsl-lx2160a-qds-19-x-x.dtb \
+ fsl-lx2160a-qds-19-11-x.dtb \
+ fsl-lx2160a-qds-20-x-x.dtb \
+ fsl-lx2160a-qds-20-11-x.dtb \
+ fsl-lx2162a-qds.dtb\
+ fsl-lx2162a-qds-17-x.dtb\
+ fsl-lx2162a-qds-18-x.dtb\
+ fsl-lx2162a-qds-20-x.dtb
+dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
+ fsl-ls1043a-qds-lpuart.dtb \
+ fsl-ls1043a-rdb.dtb \
+ fsl-ls1046a-qds-duart.dtb \
+ fsl-ls1046a-qds-lpuart.dtb \
+ fsl-ls1046a-rdb.dtb \
+ fsl-ls1046a-frwy.dtb \
+ fsl-ls1012a-qds.dtb \
+ fsl-ls1012a-rdb.dtb \
+ fsl-ls1012a-2g5rdb.dtb \
+ fsl-ls1012a-frdm.dtb \
+ fsl-ls1012a-frwy.dtb
+dtb-$(CONFIG_TARGET_SL28) += fsl-ls1028a-kontron-sl28.dtb \
+ fsl-ls1028a-kontron-sl28-var1.dtb \
+ fsl-ls1028a-kontron-sl28-var2.dtb \
+ fsl-ls1028a-kontron-sl28-var3.dtb \
+ fsl-ls1028a-kontron-sl28-var4.dtb \
+
+dtb-$(CONFIG_TARGET_TEN64) += fsl-ls1088a-ten64.dtb
+
+dtb-$(CONFIG_TARGET_DRAGONBOARD410C) += dragonboard410c.dtb
+dtb-$(CONFIG_TARGET_DRAGONBOARD820C) += dragonboard820c.dtb
+dtb-$(CONFIG_TARGET_STARQLTECHN) += starqltechn.dtb
+dtb-$(CONFIG_TARGET_QCS404EVB) += qcs404-evb.dtb
+
+dtb-$(CONFIG_TARGET_STEMMY) += ste-ux500-samsung-stemmy.dtb
+
+dtb-$(CONFIG_STM32F4) += stm32f429-disco.dtb \
+ stm32429i-eval.dtb \
+ stm32f469-disco.dtb
+
+dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb \
+ stm32f769-disco.dtb \
+ stm32746g-eval.dtb
+dtb-$(CONFIG_STM32H7) += stm32h743i-disco.dtb \
+ stm32h743i-eval.dtb \
+ stm32h750i-art-pi.dtb
+
+dtb-$(CONFIG_MACH_SUNIV) += \
+ suniv-f1c100s-licheepi-nano.dtb
+dtb-$(CONFIG_MACH_SUN4I) += \
+ sun4i-a10-a1000.dtb \
+ sun4i-a10-ba10-tvbox.dtb \
+ sun4i-a10-chuwi-v7-cw0825.dtb \
+ sun4i-a10-cubieboard.dtb \
+ sun4i-a10-dserve-dsrv9703c.dtb \
+ sun4i-a10-gemei-g9.dtb \
+ sun4i-a10-hackberry.dtb \
+ sun4i-a10-hyundai-a7hd.dtb \
+ sun4i-a10-inet1.dtb \
+ sun4i-a10-inet-3f.dtb \
+ sun4i-a10-inet-3w.dtb \
+ sun4i-a10-inet97fv2.dtb \
+ sun4i-a10-inet9f-rev03.dtb \
+ sun4i-a10-itead-iteaduino-plus.dtb \
+ sun4i-a10-jesurun-q5.dtb \
+ sun4i-a10-marsboard.dtb \
+ sun4i-a10-mini-xplus.dtb \
+ sun4i-a10-mk802.dtb \
+ sun4i-a10-mk802ii.dtb \
+ sun4i-a10-olinuxino-lime.dtb \
+ sun4i-a10-pcduino.dtb \
+ sun4i-a10-pcduino2.dtb \
+ sun4i-a10-pov-protab2-ips9.dtb \
+ sun4i-a10-topwise-a721.dtb
+dtb-$(CONFIG_MACH_SUN5I) += \
+ sun5i-a10s-auxtek-t003.dtb \
+ sun5i-a10s-auxtek-t004.dtb \
+ sun5i-a10s-mk802.dtb \
+ sun5i-a10s-olinuxino-micro.dtb \
+ sun5i-a10s-r7-tv-dongle.dtb \
+ sun5i-a10s-wobo-i5.dtb \
+ sun5i-a13-ampe-a76.dtb \
+ sun5i-a13-difrnce-dit4350.dtb \
+ sun5i-a13-empire-electronix-d709.dtb \
+ sun5i-a13-empire-electronix-m712.dtb \
+ sun5i-a13-hsg-h702.dtb \
+ sun5i-a13-inet-86vs.dtb \
+ sun5i-a13-inet-98v-rev2.dtb \
+ sun5i-a13-licheepi-one.dtb \
+ sun5i-a13-olinuxino.dtb \
+ sun5i-a13-olinuxino-micro.dtb \
+ sun5i-a13-pocketbook-touch-lux-3.dtb \
+ sun5i-a13-q8-tablet.dtb \
+ sun5i-a13-utoo-p66.dtb \
+ sun5i-gr8-chip-pro.dtb \
+ sun5i-gr8-evb.dtb \
+ sun5i-r8-chip.dtb
+dtb-$(CONFIG_MACH_SUN6I) += \
+ sun6i-a31-app4-evb1.dtb \
+ sun6i-a31-colombus.dtb \
+ sun6i-a31-hummingbird.dtb \
+ sun6i-a31-i7.dtb \
+ sun6i-a31-m9.dtb \
+ sun6i-a31-mele-a1000g-quad.dtb \
+ sun6i-a31-mixtile-loftq.dtb \
+ sun6i-a31s-colorfly-e708-q1.dtb \
+ sun6i-a31s-cs908.dtb \
+ sun6i-a31s-inet-q972.dtb \
+ sun6i-a31s-primo81.dtb \
+ sun6i-a31s-sina31s.dtb \
+ sun6i-a31s-sinovoip-bpi-m2.dtb \
+ sun6i-a31s-yones-toptech-bs1078-v2.dtb
+dtb-$(CONFIG_MACH_SUN7I) += \
+ sun7i-a20-ainol-aw1.dtb \
+ sun7i-a20-bananapi.dtb \
+ sun7i-a20-bananapi-m1-plus.dtb \
+ sun7i-a20-bananapro.dtb \
+ sun7i-a20-cubieboard2.dtb \
+ sun7i-a20-cubietruck.dtb \
+ sun7i-a20-haoyu-marsboard.dtb \
+ sun7i-a20-hummingbird.dtb \
+ sun7i-a20-i12-tvbox.dtb \
+ sun7i-a20-icnova-swac.dtb \
+ sun7i-a20-itead-ibox.dtb \
+ sun7i-a20-lamobo-r1.dtb \
+ sun7i-a20-linutronix-testbox-v2.dtb \
+ sun7i-a20-m3.dtb \
+ sun7i-a20-m5.dtb \
+ sun7i-a20-mk808c.dtb \
+ sun7i-a20-olimex-som-evb.dtb \
+ sun7i-a20-olimex-som204-evb.dtb \
+ sun7i-a20-olimex-som204-evb-emmc.dtb \
+ sun7i-a20-olinuxino-lime.dtb \
+ sun7i-a20-olinuxino-lime-emmc.dtb \
+ sun7i-a20-olinuxino-lime2.dtb \
+ sun7i-a20-olinuxino-lime2-emmc.dtb \
+ sun7i-a20-olinuxino-micro.dtb \
+ sun7i-a20-olinuxino-micro-emmc.dtb \
+ sun7i-a20-orangepi.dtb \
+ sun7i-a20-orangepi-mini.dtb \
+ sun7i-a20-pcduino3.dtb \
+ sun7i-a20-pcduino3-nano.dtb \
+ sun7i-a20-primo73.dtb \
+ sun7i-a20-wexler-tab7200.dtb \
+ sun7i-a20-wits-pro-a20-dkt.dtb \
+ sun7i-a20-yones-toptech-bd1078.dtb
+dtb-$(CONFIG_MACH_SUN8I_A23) += \
+ sun8i-a23-evb.dtb \
+ sun8i-a23-gt90h-v4.dtb \
+ sun8i-a23-inet86dz.dtb \
+ sun8i-a23-ippo-q8h-v1.2.dtb \
+ sun8i-a23-ippo-q8h-v5.dtb \
+ sun8i-a23-polaroid-mid2407pxe03.dtb \
+ sun8i-a23-polaroid-mid2809pxe04.dtb \
+ sun8i-a23-q8-tablet.dtb
+dtb-$(CONFIG_MACH_SUN8I_A33) += \
+ sun8i-a33-et-q8-v1.6.dtb \
+ sun8i-a33-ga10h-v1.1.dtb \
+ sun8i-a33-inet-d978-rev2.dtb \
+ sun8i-a33-ippo-q8h-v1.2.dtb \
+ sun8i-a33-olinuxino.dtb \
+ sun8i-a33-q8-tablet.dtb \
+ sun8i-a33-sinlinx-sina33.dtb \
+ sun8i-r16-bananapi-m2m.dtb \
+ sun8i-r16-nintendo-nes-classic.dtb \
+ sun8i-r16-nintendo-super-nes-classic.dtb \
+ sun8i-r16-parrot.dtb
+dtb-$(CONFIG_MACH_SUN8I_A83T) += \
+ sun8i-a83t-allwinner-h8homlet-v2.dtb \
+ sun8i-a83t-bananapi-m3.dtb \
+ sun8i-a83t-cubietruck-plus.dtb \
+ sun8i-a83t-tbs-a711.dtb
+dtb-$(CONFIG_MACH_SUN8I_H3) += \
+ sun8i-h2-plus-bananapi-m2-zero.dtb \
+ sun8i-h2-plus-libretech-all-h3-cc.dtb \
+ sun8i-h2-plus-orangepi-r1.dtb \
+ sun8i-h2-plus-orangepi-zero.dtb \
+ sun8i-h3-bananapi-m2-plus.dtb \
+ sun8i-h3-bananapi-m2-plus-v1.2.dtb \
+ sun8i-h3-beelink-x2.dtb \
+ sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
+ sun8i-h3-libretech-all-h3-cc.dtb \
+ sun8i-h3-mapleboard-mp130.dtb \
+ sun8i-h3-nanopi-duo2.dtb \
+ sun8i-h3-nanopi-m1.dtb \
+ sun8i-h3-nanopi-m1-plus.dtb \
+ sun8i-h3-nanopi-neo.dtb \
+ sun8i-h3-nanopi-neo-air.dtb \
+ sun8i-h3-nanopi-r1.dtb \
+ sun8i-h3-orangepi-2.dtb \
+ sun8i-h3-orangepi-lite.dtb \
+ sun8i-h3-orangepi-one.dtb \
+ sun8i-h3-orangepi-pc.dtb \
+ sun8i-h3-orangepi-pc-plus.dtb \
+ sun8i-h3-orangepi-plus.dtb \
+ sun8i-h3-orangepi-plus2e.dtb \
+ sun8i-h3-orangepi-zero-plus2.dtb \
+ sun8i-h3-rervision-dvk.dtb \
+ sun8i-h3-zeropi.dtb
+dtb-$(CONFIG_MACH_SUN8I_R40) += \
+ sun8i-r40-bananapi-m2-ultra.dtb \
+ sun8i-r40-oka40i-c.dtb \
+ sun8i-t3-cqa3t-bv3.dtb \
+ sun8i-v40-bananapi-m2-berry.dtb
+dtb-$(CONFIG_MACH_SUN8I_V3S) += \
+ sun8i-s3-elimo-initium.dtb \
+ sun8i-s3-pinecube.dtb \
+ sun8i-v3-sl631-imx179.dtb \
+ sun8i-v3s-licheepi-zero.dtb
+dtb-$(CONFIG_MACH_SUN50I_H5) += \
+ sun50i-h5-bananapi-m2-plus.dtb \
+ sun50i-h5-emlid-neutis-n5-devboard.dtb \
+ sun50i-h5-libretech-all-h3-cc.dtb \
+ sun50i-h5-libretech-all-h3-it.dtb \
+ sun50i-h5-libretech-all-h5-cc.dtb \
+ sun50i-h5-nanopi-neo2.dtb \
+ sun50i-h5-nanopi-neo-plus2.dtb \
+ sun50i-h5-nanopi-r1s-h5.dtb \
+ sun50i-h5-orangepi-zero-plus.dtb \
+ sun50i-h5-orangepi-pc2.dtb \
+ sun50i-h5-orangepi-prime.dtb \
+ sun50i-h5-orangepi-zero-plus2.dtb
+dtb-$(CONFIG_MACH_SUN50I_H6) += \
+ sun50i-h6-beelink-gs1.dtb \
+ sun50i-h6-orangepi-3.dtb \
+ sun50i-h6-orangepi-lite2.dtb \
+ sun50i-h6-orangepi-one-plus.dtb \
+ sun50i-h6-pine-h64.dtb \
+ sun50i-h6-pine-h64-model-b.dtb \
+ sun50i-h6-tanix-tx6.dtb \
+ sun50i-h6-tanix-tx6-mini.dtb
+dtb-$(CONFIG_MACH_SUN50I_H616) += \
+ sun50i-h616-orangepi-zero2.dtb \
+ sun50i-h616-x96-mate.dtb
+dtb-$(CONFIG_MACH_SUN50I) += \
+ sun50i-a64-amarula-relic.dtb \
+ sun50i-a64-bananapi-m64.dtb \
+ sun50i-a64-nanopi-a64.dtb \
+ sun50i-a64-oceanic-5205-5inmfd.dtb \
+ sun50i-a64-olinuxino.dtb \
+ sun50i-a64-olinuxino-emmc.dtb \
+ sun50i-a64-orangepi-win.dtb \
+ sun50i-a64-pine64-lts.dtb \
+ sun50i-a64-pine64-plus.dtb \
+ sun50i-a64-pine64.dtb \
+ sun50i-a64-pinebook.dtb \
+ sun50i-a64-pinephone-1.0.dtb \
+ sun50i-a64-pinephone-1.1.dtb \
+ sun50i-a64-pinephone-1.2.dtb \
+ sun50i-a64-pinetab.dtb \
+ sun50i-a64-sopine-baseboard.dtb \
+ sun50i-a64-teres-i.dtb
+dtb-$(CONFIG_MACH_SUN9I) += \
+ sun9i-a80-optimus.dtb \
+ sun9i-a80-cubieboard4.dtb \
+ sun9i-a80-cx-a99.dtb
+
+dtb-$(CONFIG_VF610) += vf610-colibri-eval-v3.dtb \
+ vf610-twr.dtb \
+ vf610-pcm052.dtb \
+ vf610-bk4r1.dtb
+
+dtb-$(CONFIG_MX23) += \
+ imx23-evk.dtb
+
+dtb-$(CONFIG_TARGET_MX23_OLINUXINO) += \
+ imx23-olinuxino.dtb
+
+dtb-$(CONFIG_MX28) += \
+ imx28-evk.dtb \
+ imx28-xea.dtb
+
+dtb-$(CONFIG_MX51) += \
+ imx51-babbage.dtb
+
+dtb-$(CONFIG_MX53) += imx53-cx9020.dtb \
+ imx53-qsb.dtb \
+ imx53-kp.dtb \
+ imx53-m53menlo.dtb \
+ imx53-usbarmory.dtb
+
+ifneq ($(CONFIG_MX6DL)$(CONFIG_MX6QDL)$(CONFIG_MX6S),)
+dtb-y += \
+ imx6dl-aristainetos2c_7.dtb \
+ imx6dl-aristainetos2c_cslb_7.dtb \
+ imx6dl-brppt2.dtb \
+ imx6dl-cubox-i.dtb \
+ imx6dl-cubox-i-emmc-som-v15.dtb \
+ imx6dl-cubox-i-som-v15.dtb \
+ imx6dl-dhcom-pdk2.dtb \
+ imx6dl-dhcom-picoitx.dts \
+ imx6dl-gw51xx.dtb \
+ imx6dl-gw52xx.dtb \
+ imx6dl-gw53xx.dtb \
+ imx6dl-gw54xx.dtb \
+ imx6dl-gw551x.dtb \
+ imx6dl-gw552x.dtb \
+ imx6dl-gw553x.dtb \
+ imx6dl-gw560x.dtb \
+ imx6dl-gw5903.dtb \
+ imx6dl-gw5904.dtb \
+ imx6dl-gw5907.dtb \
+ imx6dl-gw5910.dtb \
+ imx6dl-gw5912.dtb \
+ imx6dl-gw5913.dtb \
+ imx6dl-hummingboard2.dtb \
+ imx6dl-hummingboard2-emmc-som-v15.dtb \
+ imx6dl-hummingboard2-som-v15.dtb \
+ imx6dl-hummingboard.dtb \
+ imx6dl-hummingboard-emmc-som-v15.dtb \
+ imx6dl-hummingboard-som-v15.dtb \
+ imx6dl-icore.dtb \
+ imx6dl-icore-mipi.dtb \
+ imx6dl-icore-rqs.dtb \
+ imx6dl-mba6a.dtb \
+ imx6dl-mba6b.dtb \
+ imx6dl-mamoj.dtb \
+ imx6dl-nitrogen6x.dtb \
+ imx6dl-pico.dtb \
+ imx6dl-udoo.dtb \
+ imx6dl-riotboard.dtb \
+ imx6dl-sabreauto.dtb \
+ imx6dl-sabresd.dtb \
+ imx6dl-wandboard-revd1.dtb \
+ imx6s-dhcom-drc02.dtb
+
+endif
+
+ifneq ($(CONFIG_MX6Q)$(CONFIG_MX6QDL),)
+dtb-y += \
+ imx6q-apalis-eval.dtb \
+ imx6q-bosch-acc.dtb \
+ imx6q-cm-fx6.dtb \
+ imx6q-cubox-i.dtb \
+ imx6q-cubox-i-emmc-som-v15.dtb \
+ imx6q-cubox-i-som-v15.dtb \
+ imx6q-dhcom-pdk2.dtb \
+ imx6q-display5.dtb \
+ imx6q-gw51xx.dtb \
+ imx6q-gw52xx.dtb \
+ imx6q-gw53xx.dtb \
+ imx6q-gw54xx.dtb \
+ imx6q-gw551x.dtb \
+ imx6q-gw552x.dtb \
+ imx6q-gw553x.dtb \
+ imx6q-gw560x.dtb \
+ imx6q-gw5903.dtb \
+ imx6q-gw5904.dtb \
+ imx6q-gw5907.dtb \
+ imx6q-gw5910.dtb \
+ imx6q-gw5912.dtb \
+ imx6q-gw5913.dtb \
+ imx6q-hummingboard2.dtb \
+ imx6q-hummingboard2-emmc-som-v15.dtb \
+ imx6q-hummingboard2-som-v15.dtb \
+ imx6q-hummingboard.dtb \
+ imx6q-hummingboard-emmc-som-v15.dtb \
+ imx6q-hummingboard-som-v15.dtb \
+ imx6q-icore.dtb \
+ imx6q-icore-mipi.dtb \
+ imx6q-icore-rqs.dtb \
+ imx6q-kp.dtb \
+ imx6q-logicpd.dtb \
+ imx6q-marsboard.dtb \
+ imx6q-mba6a.dtb \
+ imx6q-mba6b.dtb \
+ imx6q-mccmon6.dtb\
+ imx6q-nitrogen6x.dtb \
+ imx6q-novena.dtb \
+ imx6q-pico.dtb \
+ imx6q-phytec-mira-rdk-nand.dtb \
+ imx6q-udoo.dtb \
+ imx6q-sabreauto.dtb \
+ imx6q-sabrelite.dtb \
+ imx6q-sabresd.dtb \
+ imx6q-tbs2910.dtb \
+ imx6q-wandboard-revd1.dtb \
+ imx6qp-sabreauto.dtb \
+ imx6qp-sabresd.dtb \
+ imx6qp-wandboard-revd1.dtb \
+
+endif
+
+dtb-$(CONFIG_MX6SL) += imx6sl-evk.dtb
+
+dtb-$(CONFIG_MX6SLL) += imx6sll-evk.dtb
+
+dtb-$(CONFIG_MX6SX) += \
+ imx6sx-sabreauto.dtb \
+ imx6sx-sdb.dtb \
+ imx6sx-softing-vining-2000.dtb \
+ imx6sx-udoo-neo-basic.dtb \
+ imx6sx-udoo-neo-extended.dtb \
+ imx6sx-udoo-neo-full.dtb
+
+dtb-$(CONFIG_MX6UL) += \
+ imx6ul-geam.dtb \
+ imx6ul-isiot-emmc.dtb \
+ imx6ul-isiot-nand.dtb \
+ imx6ul-opos6uldev.dtb \
+ imx6ul-14x14-evk.dtb \
+ imx6ul-9x9-evk.dtb \
+ imx6ul-9x9-evk.dtb \
+ imx6ul-liteboard.dtb \
+ imx6ul-phytec-segin-ff-rdk-nand.dtb \
+ imx6ul-pico-hobbit.dtb \
+ imx6ul-pico-pi.dtb \
+ imx6ul-kontron-bl.dtb \
+ imx6ull-kontron-bl.dtb
+
+dtb-$(CONFIG_MX6ULL) += \
+ imx6ull-14x14-evk.dtb \
+ imx6ull-colibri-emmc-eval-v3.dtb \
+ imx6ull-colibri-eval-v3.dtb \
+ imx6ull-myir-mys-6ulx-eval.dtb \
+ imx6ull-seeed-npi-imx6ull-dev-board.dtb \
+ imx6ull-phytec-segin-ff-rdk-emmc.dtb \
+ imx6ull-dart-6ul.dtb \
+ imx6ull-somlabs-visionsom.dtb \
+ imx6ulz-bsh-smm-m2.dtb \
+ imx6ulz-14x14-evk.dtb
+
+dtb-$(CONFIG_ARCH_MX6) += \
+ imx6q-apalis-eval.dtb \
+ imx6dl-colibri-eval-v3.dtb
+
+dtb-$(CONFIG_O4_IMX_NANO) += \
+ o4-imx-nano.dtb
+
+dtb-$(CONFIG_EV_IMX280_NANO_X_MB) += \
+ ev-imx280-nano-x-mb.dtb
+
+dtb-$(CONFIG_MX7) += imx7d-sdb.dtb \
+ imx7d-sdb-qspi.dtb \
+ imx7-cm.dtb \
+ imx7d-colibri-emmc-eval-v3.dtb \
+ imx7d-colibri-eval-v3.dtb \
+ imx7s-warp.dtb \
+ imx7d-meerkat96.dtb \
+ imx7d-pico-pi.dtb \
+ imx7d-pico-hobbit.dtb \
+ imx7d-smegw01.dtb
+
+dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-com.dtb \
+ imx7ulp-evk.dtb
+
+dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
+
+dtb-$(CONFIG_ARCH_IMX8) += \
+ fsl-imx8qm-apalis.dtb \
+ fsl-imx8qm-mek.dtb \
+ imx8qm-cgtqmx8.dtb \
+ imx8qm-dmsse20-a1.dtb \
+ imx8qm-rom7720-a1.dtb \
+ fsl-imx8qxp-ai_ml.dtb \
+ fsl-imx8qxp-colibri.dtb \
+ fsl-imx8qxp-mek.dtb \
+ imx8-deneb.dtb \
+ imx8-giedi.dtb
+
+dtb-$(CONFIG_ARCH_IMX8ULP) += \
+ imx8ulp-evk.dtb
+
+dtb-$(CONFIG_ARCH_IMX8M) += \
+ imx8mm-data-modul-edm-sbc.dtb \
+ imx8mm-evk.dtb \
+ imx8mm-icore-mx8mm-ctouch2.dtb \
+ imx8mm-icore-mx8mm-edimm2.2.dtb \
+ imx8mm-kontron-bl.dtb \
+ imx8mm-kontron-bl-osm-s.dtb \
+ imx8mm-mx8menlo.dtb \
+ imx8mm-phg.dtb \
+ imx8mm-venice.dtb \
+ imx8mm-venice-gw71xx-0x.dtb \
+ imx8mm-venice-gw72xx-0x.dtb \
+ imx8mm-venice-gw73xx-0x.dtb \
+ imx8mm-venice-gw7901.dtb \
+ imx8mm-venice-gw7902.dtb \
+ imx8mm-venice-gw7903.dtb \
+ imx8mm-venice-gw7904.dtb \
+ imx8mm-verdin-wifi-dev.dtb \
+ phycore-imx8mm.dtb \
+ imx8mn-bsh-smm-s2.dtb \
+ imx8mn-bsh-smm-s2pro.dtb \
+ imx8mn-ddr4-evk.dtb \
+ imx8mq-cm.dtb \
+ imx8mn-evk.dtb \
+ imx8mn-var-som-symphony.dtb \
+ imx8mn-venice.dtb \
+ imx8mn-venice-gw7902.dtb \
+ imx8mq-evk.dtb \
+ imx8mm-beacon-kit.dtb \
+ imx8mn-beacon-kit.dtb \
+ imx8mq-mnt-reform2.dtb \
+ imx8mq-phanbell.dtb \
+ imx8mp-beacon-kit.dtb \
+ imx8mp-data-modul-edm-sbc.dtb \
+ imx8mp-dhcom-pdk2.dtb \
+ imx8mp-dhcom-pdk3.dtb \
+ imx8mp-evk.dtb \
+ imx8mp-icore-mx8mp-edimm2.2.dtb \
+ imx8mp-msc-sm2s.dtb \
+ imx8mp-phyboard-pollux-rdk.dtb \
+ imx8mp-venice.dtb \
+ imx8mp-venice-gw74xx.dtb \
+ imx8mp-verdin-wifi-dev.dtb \
+ imx8mq-pico-pi.dtb \
+ imx8mq-kontron-pitx-imx8m.dtb \
+ imx8mq-librem5-r4.dtb
+
+dtb-$(CONFIG_ARCH_IMX9) += \
+ imx93-11x11-evk.dtb
+
+dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \
+ imxrt1020-evk.dtb \
+ imxrt1170-evk.dtb \
+
+dtb-$(CONFIG_RCAR_GEN2) += \
+ r8a7790-lager-u-boot.dtb \
+ r8a7790-stout-u-boot.dtb \
+ r8a7791-koelsch-u-boot.dtb \
+ r8a7791-porter-u-boot.dtb \
+ r8a7792-blanche-u-boot.dtb \
+ r8a7793-gose-u-boot.dtb \
+ r8a7794-alt-u-boot.dtb \
+ r8a7794-silk-u-boot.dtb
+
+dtb-$(CONFIG_RCAR_GEN3) += \
+ r8a774a1-beacon-rzg2m-kit.dtb \
+ r8a774b1-beacon-rzg2n-kit.dtb \
+ r8a774e1-beacon-rzg2h-kit.dtb \
+ r8a774a1-hihope-rzg2m-u-boot.dtb \
+ r8a774b1-hihope-rzg2n-u-boot.dtb \
+ r8a774c0-ek874-u-boot.dtb \
+ r8a774e1-hihope-rzg2h-u-boot.dtb \
+ r8a77950-ulcb-u-boot.dtb \
+ r8a77950-salvator-x-u-boot.dtb \
+ r8a77960-ulcb-u-boot.dtb \
+ r8a77960-salvator-x-u-boot.dtb \
+ r8a77965-ulcb-u-boot.dtb \
+ r8a77965-salvator-x-u-boot.dtb \
+ r8a77970-eagle-u-boot.dtb \
+ r8a77980-condor-u-boot.dtb \
+ r8a77990-ebisu-u-boot.dtb \
+ r8a77995-draak-u-boot.dtb
+
+dtb-$(CONFIG_RCAR_GEN4) += \
+ r8a779a0-falcon-u-boot.dtb \
+ r8a779f0-spider-u-boot.dtb \
+ r8a779g0-white-hawk-u-boot.dtb
+
+ifdef CONFIG_RCAR_64
+DTC_FLAGS += -R 4 -p 0x1000
+endif
+
+dtb-$(CONFIG_RZA1) += \
+ r7s72100-gr-peach-u-boot.dtb
+
+dtb-$(CONFIG_ARCH_KEYSTONE) += keystone-k2hk-evm.dtb \
+ keystone-k2l-evm.dtb \
+ keystone-k2e-evm.dtb \
+ keystone-k2g-evm.dtb \
+ keystone-k2g-generic.dtb \
+ keystone-k2g-ice.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9261EK) += at91sam9261ek.dtb
+
+dtb-$(CONFIG_TARGET_PM9261) += at91sam9261ek.dtb
+
+dtb-$(CONFIG_TARGET_PM9263) += at91sam9263ek.dtb
+
+dtb-$(CONFIG_TARGET_MEESC) += at91sam9263ek.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9263EK) += at91sam9263ek.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9RLEK) += at91sam9rlek.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9260EK) += \
+ at91sam9260ek.dtb \
+ at91sam9g20ek.dtb \
+ at91sam9g20ek_2mmc.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9M10G45EK) += at91sam9m10g45ek.dtb
+
+dtb-$(CONFIG_TARGET_PM9G45) += at91sam9m10g45ek.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9X5EK) += \
+ at91sam9g15ek.dtb \
+ at91sam9g25ek.dtb \
+ at91sam9g35ek.dtb \
+ at91sam9x25ek.dtb \
+ at91sam9x35ek.dtb
+
+dtb-$(CONFIG_TARGET_SAM9X60EK) += sam9x60ek.dtb
+
+dtb-$(CONFIG_TARGET_SAM9X60_CURIOSITY) += at91-sam9x60_curiosity.dtb
+
+dtb-$(CONFIG_TARGET_AT91SAM9N12EK) += at91sam9n12ek.dtb
+
+dtb-$(CONFIG_TARGET_GARDENA_SMART_GATEWAY_AT91SAM) += \
+ at91sam9g25-gardena-smart-gateway.dtb
+
+dtb-$(CONFIG_TARGET_ETHERNUT5) += ethernut5.dtb
+
+dtb-$(CONFIG_TARGET_USB_A9263) += usb_a9263.dtb
+
+dtb-$(CONFIG_TARGET_OMAP3_LOGIC) += \
+ logicpd-som-lv-35xx-devkit.dtb \
+ logicpd-som-lv-37xx-devkit.dtb \
+ logicpd-torpedo-35xx-devkit.dtb \
+ logicpd-torpedo-37xx-devkit.dtb
+
+dtb-$(CONFIG_TARGET_OMAP3_EVM) += \
+ omap3-evm-37xx.dtb \
+ omap3-evm.dtb
+
+dtb-$(CONFIG_TARGET_OMAP3_BEAGLE) += \
+ omap3-beagle-xm-ab.dtb \
+ omap3-beagle-xm.dtb \
+ omap3-beagle.dtb
+
+dtb-$(CONFIG_TARGET_DEVKIT8000) += omap3-devkit8000.dtb
+
+dtb-$(CONFIG_TARGET_OMAP3_IGEP00X0) += \
+ omap3-igep0020.dtb
+
+dtb-$(CONFIG_TARGET_OMAP4_PANDA) += \
+ omap4-panda.dtb \
+ omap4-panda-es.dtb
+
+dtb-$(CONFIG_TARGET_OMAP4_SDP4430) += \
+ omap4-sdp.dtb \
+ omap4-sdp-es23plus.dtb
+
+dtb-$(CONFIG_TARGET_SAMA7G5EK) += \
+ at91-sama7g5ek.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D2_PTC_EK) += \
+ at91-sama5d2_ptc_ek.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \
+ at91-sama5d2_xplained.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D27_SOM1_EK) += \
+ at91-sama5d27_som1_ek.dtb \
+ at91-sama5d27_giantboard.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D27_WLSOM1_EK) += \
+ at91-sama5d27_wlsom1_ek.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D2_ICP) += \
+ at91-sama5d2_icp.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D3XEK) += \
+ sama5d31ek.dtb \
+ sama5d33ek.dtb \
+ sama5d34ek.dtb \
+ sama5d35ek.dtb \
+ sama5d36ek.dtb \
+ sama5d36ek_cmp.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D3_XPLAINED) += \
+ at91-sama5d3_xplained.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D4EK) += \
+ at91-sama5d4ek.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D4_XPLAINED) += \
+ at91-sama5d4_xplained.dtb
+
+dtb-$(CONFIG_TARGET_VINCO) += \
+ at91-vinco.dtb
+
+dtb-$(CONFIG_ARCH_BCM283X) += \
+ bcm2835-rpi-a.dtb \
+ bcm2835-rpi-a-plus.dtb \
+ bcm2835-rpi-b.dtb \
+ bcm2835-rpi-b-plus.dtb \
+ bcm2835-rpi-b-rev2.dtb \
+ bcm2835-rpi-cm1-io1.dtb \
+ bcm2835-rpi-zero.dtb \
+ bcm2835-rpi-zero-w.dtb\
+ bcm2836-rpi-2-b.dtb \
+ bcm2837-rpi-3-a-plus.dtb \
+ bcm2837-rpi-3-b.dtb \
+ bcm2837-rpi-3-b-plus.dtb \
+ bcm2837-rpi-cm3-io3.dtb \
+ bcm2711-rpi-4-b.dtb
+
+dtb-$(CONFIG_TARGET_BCMNS) += ns-board.dtb
+
+dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb
+
+dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb
+
+dtb-$(CONFIG_BCM47622) += \
+ bcm947622.dtb
+dtb-$(CONFIG_BCM4908) += \
+ bcm94908.dtb
+dtb-$(CONFIG_BCM4912) += \
+ bcm94912.dtb
+dtb-$(CONFIG_BCM63138) += \
+ bcm963138.dtb
+dtb-$(CONFIG_BCM63146) += \
+ bcm963146.dtb
+dtb-$(CONFIG_BCM63148) += \
+ bcm963148.dtb
+dtb-$(CONFIG_BCM63158) += \
+ bcm963158.dtb
+dtb-$(CONFIG_BCM63178) += \
+ bcm963178.dtb
+dtb-$(CONFIG_BCM6756) += \
+ bcm96756.dtb
+dtb-$(CONFIG_BCM6813) += \
+ bcm96813.dtb
+dtb-$(CONFIG_BCM6846) += \
+ bcm96846.dtb
+dtb-$(CONFIG_BCM6855) += \
+ bcm96855.dtb \
+ bcm96753ref.dtb
+dtb-$(CONFIG_BCM6856) += \
+ bcm96856.dtb \
+ bcm968360bg.dtb
+dtb-$(CONFIG_BCM6858) += \
+ bcm96858.dtb \
+ bcm968580xref.dtb
+dtb-$(CONFIG_BCM6878) += \
+ bcm96878.dtb
+
+dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb
+dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
+
+dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
+
+dtb-$(CONFIG_STM32MP13x) += \
+ stm32mp135f-dk.dtb
+
+dtb-$(CONFIG_STM32MP15x) += \
+ stm32mp157a-dk1.dtb \
+ stm32mp157a-dk1-scmi.dtb \
+ stm32mp157a-icore-stm32mp1-ctouch2.dtb \
+ stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
+ stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
+ stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
+ stm32mp157c-dk2.dtb \
+ stm32mp157c-dk2-scmi.dtb \
+ stm32mp157c-ed1.dtb \
+ stm32mp157c-ed1-scmi.dtb \
+ stm32mp157c-ev1.dtb \
+ stm32mp157c-ev1-scmi.dtb \
+ stm32mp157c-odyssey.dtb \
+ stm32mp15xx-dhcom-drc02.dtb \
+ stm32mp15xx-dhcom-pdk2.dtb \
+ stm32mp15xx-dhcom-picoitx.dtb \
+ stm32mp15xx-dhcor-avenger96.dtb \
+ stm32mp15xx-dhcor-drc-compact.dtb \
+ stm32mp15xx-dhcor-testbench.dtb
+
+dtb-$(CONFIG_SOC_K3_AM654) += \
+ k3-am654-base-board.dtb \
+ k3-am654-r5-base-board.dtb \
+ k3-am65-iot2050-spl.dtb \
+ k3-am6528-iot2050-basic.dtb \
+ k3-am6528-iot2050-basic-pg2.dtb \
+ k3-am6548-iot2050-advanced.dtb \
+ k3-am6548-iot2050-advanced-pg2.dtb \
+ k3-am6548-iot2050-advanced-m2.dtb \
+ k3-am6548-iot2050-advanced-m2-bkey-usb3-overlay.dtbo \
+ k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie-overlay.dtbo
+dtb-$(CONFIG_SOC_K3_J721E) += k3-j721e-common-proc-board.dtb \
+ k3-j721e-r5-common-proc-board.dtb \
+ k3-j7200-common-proc-board.dtb \
+ k3-j7200-r5-common-proc-board.dtb \
+ k3-j721e-sk.dtb \
+ k3-j721e-r5-sk.dtb
+dtb-$(CONFIG_SOC_K3_J721S2) += k3-am68-sk-base-board.dtb\
+ k3-am68-sk-r5-base-board.dtb\
+ k3-j721s2-common-proc-board.dtb\
+ k3-j721s2-r5-common-proc-board.dtb
+dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-evm.dtb \
+ k3-am642-r5-evm.dtb \
+ k3-am642-sk.dtb \
+ k3-am642-r5-sk.dtb
+
+dtb-$(CONFIG_SOC_K3_AM625) += k3-am625-sk.dtb \
+ k3-am625-r5-sk.dtb
+
+dtb-$(CONFIG_SOC_K3_AM625) += k3-am62a7-sk.dtb \
+ k3-am62a7-r5-sk.dtb
+
+dtb-$(CONFIG_ARCH_MEDIATEK) += \
+ mt7622-rfb.dtb \
+ mt7623a-unielec-u7623-02-emmc.dtb \
+ mt7622-bananapi-bpi-r64.dtb \
+ mt7623n-bananapi-bpi-r2.dtb \
+ mt7629-rfb.dtb \
+ mt7981-rfb.dtb \
+ mt7981-emmc-rfb.dtb \
+ mt7981-sd-rfb.dtb \
+ mt7986a-bpi-r3-sd.dtb \
+ mt7986a-bpi-r3-emmc.dtb \
+ mt7986a-rfb.dtb \
+ mt7986b-rfb.dtb \
+ mt7986a-sd-rfb.dtb \
+ mt7986b-sd-rfb.dtb \
+ mt7986a-emmc-rfb.dtb \
+ mt7986b-emmc-rfb.dtb \
+ mt8183-pumpkin.dtb \
+ mt8512-bm1-emmc.dtb \
+ mt8516-pumpkin.dtb \
+ mt8518-ap1-emmc.dtb
+
+dtb-$(CONFIG_ARCH_NPCM7xx) += nuvoton-npcm750-evb.dtb
+dtb-$(CONFIG_ARCH_NPCM8XX) += nuvoton-npcm845-evb.dtb
+dtb-$(CONFIG_XEN) += xenguest-arm64.dtb
+
+dtb-$(CONFIG_ARCH_OCTEONTX) += octeontx.dtb
+dtb-$(CONFIG_ARCH_OCTEONTX2) += octeontx.dtb
+
+dtb-$(CONFIG_TARGET_GE_BX50V3) += \
+ imx6q-bx50v3.dtb \
+ imx6q-b850v3.dtb \
+ imx6q-b650v3.dtb \
+ imx6q-b450v3.dtb
+
+dtb-$(CONFIG_TARGET_GE_B1X5V2) += imx6dl-b1x5v2.dtb
+dtb-$(CONFIG_TARGET_MX53PPD) += imx53-ppd.dtb
+
+# TODO(Linus Walleij <linus.walleij@linaro.org>): Should us a single vexpress
+# Kconfig option to build all of these. See examples above.
+dtb-$(CONFIG_TARGET_VEXPRESS_CA9X4) += vexpress-v2p-ca9.dtb
+dtb-$(CONFIG_TARGET_VEXPRESS64_BASE_FVP) += fvp-base-revc.dtb
+dtb-$(CONFIG_TARGET_VEXPRESS64_BASER_FVP) += arm_fvp.dtb
+dtb-$(CONFIG_TARGET_VEXPRESS64_JUNO) += juno-r2.dtb
+
+dtb-$(CONFIG_TARGET_TOTAL_COMPUTE) += total_compute.dtb
+
+dtb-$(CONFIG_TARGET_DURIAN) += phytium-durian.dtb
+dtb-$(CONFIG_TARGET_POMELO) += phytium-pomelo.dtb
+
+dtb-$(CONFIG_TARGET_PRESIDIO_ASIC) += ca-presidio-engboard.dtb
+
+dtb-$(CONFIG_TARGET_GXP) += hpe-bmc-dl360gen10.dts
+
+dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE) += imx8mm-cl-iot-gate.dtb \
+ imx8mm-cl-iot-gate-ied.dtbo \
+ imx8mm-cl-iot-gate-ied-adc0.dtbo \
+ imx8mm-cl-iot-gate-ied-adc1.dtbo \
+ imx8mm-cl-iot-gate-ied-can0.dtbo \
+ imx8mm-cl-iot-gate-ied-can1.dtbo \
+ imx8mm-cl-iot-gate-ied-tpm0.dtbo \
+ imx8mm-cl-iot-gate-ied-tpm1.dtbo
+
+dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE_OPTEE) += imx8mm-cl-iot-gate-optee.dtb \
+ imx8mm-cl-iot-gate-ied.dtbo \
+ imx8mm-cl-iot-gate-ied-adc0.dtbo \
+ imx8mm-cl-iot-gate-ied-adc1.dtbo \
+ imx8mm-cl-iot-gate-ied-can0.dtbo \
+ imx8mm-cl-iot-gate-ied-can1.dtbo \
+ imx8mm-cl-iot-gate-ied-tpm0.dtbo \
+ imx8mm-cl-iot-gate-ied-tpm1.dtbo
+
+ifneq ($(CONFIG_TARGET_IMX8MP_RSB3720A1_4G)$(CONFIG_TARGET_IMX8MP_RSB3720A1_6G),)
+dtb-y += imx8mp-rsb3720-a1.dtb
+endif
+
+dtb-$(CONFIG_TARGET_EA_LPC3250DEVKITV2) += lpc3250-ea3250.dtb
+
+dtb-$(CONFIG_ARCH_QEMU) += qemu-arm.dtb qemu-arm64.dtb
+
+dtb-$(CONFIG_TARGET_CORSTONE1000) += corstone1000-mps3.dtb \
+ corstone1000-fvp.dtb
+
+include $(srctree)/scripts/Makefile.dts
+
+targets += $(dtb-y)
+
+# Add any required device tree compiler flags here
+DTC_FLAGS += -a 0x8
+
+PHONY += dtbs
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+ @:
+
+clean-files := *.dtb *.dtbo *_HS
Index: denx/create-2023.07-orange-pi5-patch/u-boot-2023.07-new/arch/arm/dts/rk3588.dtsi
===================================================================
--- denx/create-2023.07-orange-pi5-patch/u-boot-2023.07-new/arch/arm/dts/rk3588.dtsi (nonexistent)
+++ denx/create-2023.07-orange-pi5-patch/u-boot-2023.07-new/arch/arm/dts/rk3588.dtsi (revision 385)
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include "rk3588s.dtsi"
+#include "rk3588-pinctrl.dtsi"
+
+/ {
+ gmac0: ethernet@fe1b0000 {
+ compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
+ reg = <0x0 0xfe1b0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>,
+ <&cru PCLK_GMAC0>, <&cru ACLK_GMAC0>,
+ <&cru CLK_GMAC0_PTP_REF>;
+ clock-names = "stmmaceth", "clk_mac_ref",
+ "pclk_mac", "aclk_mac",
+ "ptp_ref";
+ power-domains = <&power RK3588_PD_GMAC>;
+ resets = <&cru SRST_A_GMAC0>;
+ reset-names = "stmmaceth";
+ rockchip,grf = <&sys_grf>;
+ rockchip,php-grf = <&php_grf>;
+ snps,axi-config = <&gmac0_stmmac_axi_setup>;
+ snps,mixed-burst;
+ snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
+ snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
+ snps,tso;
+ status = "disabled";
+
+ mdio0: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ };
+
+ gmac0_stmmac_axi_setup: stmmac-axi-config {
+ snps,blen = <0 0 0 0 16 8 4>;
+ snps,wr_osr_lmt = <4>;
+ snps,rd_osr_lmt = <8>;
+ };
+
+ gmac0_mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <2>;
+ queue0 {};
+ queue1 {};
+ };
+
+ gmac0_mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <2>;
+ queue0 {};
+ queue1 {};
+ };
+ };
+
+ crypto: crypto@fe370000 {
+ compatible = "rockchip,rk3588-crypto";
+ reg = <0x0 0xfe370000 0x0 0x4000>;
+ clocks = <&scmi_clk SCMI_CRYPTO_CORE>, <&scmi_clk SCMI_CRYPTO_PKA>;
+ clock-names = "sclk_crypto", "apkclk_crypto";
+ clock-frequency = <350000000>, <350000000>;
+ status = "disabled";
+ };
+
+};
Index: denx/create-2023.07-orange-pi5-patch/u-boot-2023.07-new/arch/arm/dts/rk3588s-orangepi-5-u-boot.dtsi
===================================================================
--- denx/create-2023.07-orange-pi5-patch/u-boot-2023.07-new/arch/arm/dts/rk3588s-orangepi-5-u-boot.dtsi (nonexistent)
+++ denx/create-2023.07-orange-pi5-patch/u-boot-2023.07-new/arch/arm/dts/rk3588s-orangepi-5-u-boot.dtsi (revision 385)
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Collabora Ltd.
+ */
+
+#include "rk3588-u-boot.dtsi"
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ mmc0 = &sdmmc;
+ mmc1 = &sdhci;
+ spi0 = &sfc;
+ };
+
+ chosen {
+ u-boot,spl-boot-order = "same-as-spl", &sdmmc, &sdhci, &spi_nand, &spi_nor;
+ };
+
+ secure-otp@fe3a0000 {
+ u-boot,dm-spl;
+ compatible = "rockchip,rk3588-secure-otp";
+ reg = <0x0 0xfe3a0000 0x0 0x4000>;
+ };
+
+/*
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+*/
+/*
+ vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2 {
+ u-boot,dm-pre-reloc;
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_pcie2x1l2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ //regulator-boot-on;
+ //regulator-always-on;
+ gpios = <0 RK_PC5 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <50000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+*/
+};
+
+&combphy0_ps {
+ status = "okay";
+};
+
+&emmc_bus8 {
+ bootph-all;
+};
+
+&emmc_clk {
+ bootph-all;
+};
+
+&emmc_cmd {
+ bootph-all;
+};
+
+&emmc_data_strobe {
+ bootph-all;
+};
+
+&emmc_rstnout {
+ bootph-all;
+};
+
+&fspim2_pins {
+ bootph-all;
+};
+
+&pcie2x1l2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2x1l2_pins &pcie_reset_h>;
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+/* vpcie3v3-supply = <&vcc3v3_pcie2x1l2>; */
+ status = "okay";
+};
+
+
+&pinctrl {
+ bootph-all;
+
+ pcie {
+ pcie_reset_h: pcie-reset-h {
+ rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie2x1l2_pins: pcie2x1l2-pins {
+ rockchip,pins = <3 RK_PC7 4 &pcfg_pull_none>,
+ <3 RK_PD0 4 &pcfg_pull_none>;
+ };
+
+ };
+
+/*
+ usb {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+*/
+};
+
+
+&pcfg_pull_none {
+ bootph-all;
+};
+
+&pcfg_pull_up_drv_level_2 {
+ bootph-all;
+};
+
+&pcfg_pull_up {
+ bootph-all;
+};
+
+&sdmmc {
+ bus-width = <4>;
+ u-boot,dm-spl;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&sdmmc_bus4 {
+ bootph-all;
+};
+
+&sdmmc_clk {
+ bootph-all;
+};
+
+&sdmmc_cmd {
+ bootph-all;
+};
+
+&sdmmc_det {
+ bootph-all;
+};
+
+&sdhci {
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_data_strobe &emmc_rstnout>;
+ non-removable;
+ status = "okay";
+};
+
+&sfc {
+ bootph-pre-ram;
+ u-boot,spl-sfc-no-dma;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fspim2_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+/*
+ flash@0 {
+ bootph-pre-ram;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ };
+*/
+ spi_nand: flash@0 {
+ bootph-pre-ram;
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <80000000>;
+ };
+
+ spi_nor: flash@1 {
+ bootph-pre-ram;
+ compatible = "jedec,spi-nor";
+ label = "sfc_nor";
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <80000000>;
+ };
+
+};
+
+&uart2m0_xfer {
+ bootph-all;
+};
+
+&usb_host0_ehci {
+ companion = <&usb_host0_ohci>;
+ phys = <&u2phy2_host>;
+ phy-names = "usb2-phy";
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ phys = <&u2phy2_host>;
+ phy-names = "usb2-phy";
+ status = "okay";
+};
+
+&usb2phy2_grf {
+ status = "okay";
+};
+
+&u2phy2 {
+ resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>;
+ reset-names = "phy", "apb";
+ clock-output-names = "usb480m_phy2";
+ status = "okay";
+};
+
+&u2phy2_host {
+/* phy-supply = <&vcc5v0_host>;*/
+ bootph-pre-ram;
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ companion = <&usb_host1_ohci>;
+ phys = <&u2phy3_host>;
+ phy-names = "usb2-phy";
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ phys = <&u2phy3_host>;
+ phy-names = "usb2-phy";
+ status = "okay";
+};
+
+&usb2phy3_grf {
+ status = "okay";
+};
+
+&u2phy3 {
+ resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>;
+ reset-names = "phy", "apb";
+ clock-output-names = "usb480m_phy3";
+ status = "okay";
+};
+
+&u2phy3_host {
+/* phy-supply = <&vcc5v0_host>;*/
+ bootph-pre-ram;
+ status = "okay";
+};
+
Index: denx/create-2023.07-orange-pi5-patch/u-boot-2023.07-new/arch/arm/dts/rk3588s-orangepi-5.dts
===================================================================
--- denx/create-2023.07-orange-pi5-patch/u-boot-2023.07-new/arch/arm/dts/rk3588s-orangepi-5.dts (nonexistent)
+++ denx/create-2023.07-orange-pi5-patch/u-boot-2023.07-new/arch/arm/dts/rk3588s-orangepi-5.dts (revision 385)
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3588.dtsi"
+#include <dt-bindings/pinctrl/rockchip.h>
+
+/ {
+ model = "Orange Pi 5";
+ compatible = "rockchip,rk3588s-orangepi-5", "rockchip,rk3588";
+
+ aliases {
+ mmc0 = &sdmmc;
+ mmc1 = &sdhci;
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&sdhci {
+ bus-width = <8>;
+ no-sdio;
+ no-sd;
+ non-removable;
+ max-frequency = <200000000>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
Index: denx/create-2023.07-orange-pi5-patch/u-boot-2023.07-new/configs/orangepi-5-rk3588s_defconfig
===================================================================
--- denx/create-2023.07-orange-pi5-patch/u-boot-2023.07-new/configs/orangepi-5-rk3588s_defconfig (nonexistent)
+++ denx/create-2023.07-orange-pi5-patch/u-boot-2023.07-new/configs/orangepi-5-rk3588s_defconfig (revision 385)
@@ -0,0 +1,100 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_TEXT_BASE=0x00a00000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
+CONFIG_SF_DEFAULT_SPEED=24000000
+CONFIG_SF_DEFAULT_MODE=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="rk3588s-orangepi-5"
+CONFIG_ROCKCHIP_RK3588=y
+CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
+CONFIG_ROCKCHIP_SPI_IMAGE=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_TARGET_EVB_RK3588=y
+CONFIG_SPL_STACK=0x400000
+CONFIG_DEBUG_UART_BASE=0xFEB50000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588s-orangepi-5.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x4000000
+CONFIG_SPL_BSS_MAX_SIZE=0x4000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SPL_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_XTX=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PCIE_DW_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_SPL_RAM=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_ROCKCHIP_SFC=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_LAN75XX=y
+CONFIG_USB_ETHER_LAN78XX=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_ERRNO_STR=y
Index: denx/create-2023.07-version-patch/create.patch.sh
===================================================================
--- denx/create-2023.07-version-patch/create.patch.sh (nonexistent)
+++ denx/create-2023.07-version-patch/create.patch.sh (revision 385)
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+VERSION=2023.07
+
+tar --files-from=file.list -xjvf ../u-boot-$VERSION.tar.bz2
+mv u-boot-$VERSION u-boot-$VERSION-orig
+
+cp -rf ./u-boot-$VERSION-new ./u-boot-$VERSION
+
+diff --unified -Nr u-boot-$VERSION-orig u-boot-$VERSION > u-boot-$VERSION-version.patch
+
+mv u-boot-$VERSION-version.patch ../patches
+
+rm -rf ./u-boot-$VERSION
+rm -rf ./u-boot-$VERSION-orig
Property changes on: denx/create-2023.07-version-patch/create.patch.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: denx/create-2023.07-version-patch/file.list
===================================================================
--- denx/create-2023.07-version-patch/file.list (nonexistent)
+++ denx/create-2023.07-version-patch/file.list (revision 385)
@@ -0,0 +1 @@
+u-boot-2023.07/Makefile
Index: denx/create-2023.07-version-patch/u-boot-2023.07-new/Makefile
===================================================================
--- denx/create-2023.07-version-patch/u-boot-2023.07-new/Makefile (nonexistent)
+++ denx/create-2023.07-version-patch/u-boot-2023.07-new/Makefile (revision 385)
@@ -0,0 +1,2484 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+VERSION = 2023
+PATCHLEVEL = 07
+SUBLEVEL =
+EXTRAVERSION =
+NAME =
+
+# *DOCUMENTATION*
+# To see a list of typical targets execute "make help"
+# More info can be located in ./README
+# Comments in this file are targeted only to the developer, do not
+# expect to learn how to build the kernel reading this file.
+
+# Do not use make's built-in rules and variables
+# (this increases performance and avoids hard-to-debug behaviour)
+MAKEFLAGS += -rR
+
+# Determine target architecture for the sandbox
+include include/host_arch.h
+ifeq ("", "$(CROSS_COMPILE)")
+ MK_ARCH="${shell uname -m}"
+else
+ MK_ARCH="${shell echo $(CROSS_COMPILE) | sed -n 's/^[[:space:]]*\([^\/]*\/\)*\([^-]*\)-[^[:space:]]*/\2/p'}"
+endif
+unexport HOST_ARCH
+ifeq ("x86_64", $(MK_ARCH))
+ export HOST_ARCH=$(HOST_ARCH_X86_64)
+else ifneq (,$(findstring $(MK_ARCH), "i386" "i486" "i586" "i686"))
+ export HOST_ARCH=$(HOST_ARCH_X86)
+else ifneq (,$(findstring $(MK_ARCH), "aarch64" "armv8l"))
+ export HOST_ARCH=$(HOST_ARCH_AARCH64)
+else ifneq (,$(findstring $(MK_ARCH), "arm" "armv7" "armv7a" "armv7l"))
+ export HOST_ARCH=$(HOST_ARCH_ARM)
+else ifeq ("riscv32", $(MK_ARCH))
+ export HOST_ARCH=$(HOST_ARCH_RISCV32)
+else ifeq ("riscv64", $(MK_ARCH))
+ export HOST_ARCH=$(HOST_ARCH_RISCV64)
+endif
+undefine MK_ARCH
+
+# Avoid funny character set dependencies
+unexport LC_ALL
+LC_COLLATE=C
+LC_NUMERIC=C
+export LC_COLLATE LC_NUMERIC
+
+# Avoid interference with shell env settings
+unexport GREP_OPTIONS
+
+# We are using a recursive build, so we need to do a little thinking
+# to get the ordering right.
+#
+# Most importantly: sub-Makefiles should only ever modify files in
+# their own directory. If in some directory we have a dependency on
+# a file in another dir (which doesn't happen often, but it's often
+# unavoidable when linking the built-in.o targets which finally
+# turn into vmlinux), we will call a sub make in that other dir, and
+# after that we are sure that everything which is in that other dir
+# is now up to date.
+#
+# The only cases where we need to modify files which have global
+# effects are thus separated out and done before the recursive
+# descending is started. They are now explicitly listed as the
+# prepare rule.
+
+# Beautify output
+# ---------------------------------------------------------------------------
+#
+# Normally, we echo the whole command before executing it. By making
+# that echo $($(quiet)$(cmd)), we now have the possibility to set
+# $(quiet) to choose other forms of output instead, e.g.
+#
+# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
+# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
+#
+# If $(quiet) is empty, the whole command will be printed.
+# If it is set to "quiet_", only the short version will be printed.
+# If it is set to "silent_", nothing will be printed at all, since
+# the variable $(silent_cmd_cc_o_c) doesn't exist.
+#
+# A simple variant is to prefix commands with $(Q) - that's useful
+# for commands that shall be hidden in non-verbose mode.
+#
+# $(Q)ln $@ :<
+#
+# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
+# If KBUILD_VERBOSE equals 1 then the above command is displayed.
+#
+# To put more focus on warnings, be less verbose as default
+# Use 'make V=1' to see the full commands
+
+ifeq ("$(origin V)", "command line")
+ KBUILD_VERBOSE = $(V)
+endif
+ifndef KBUILD_VERBOSE
+ KBUILD_VERBOSE = 0
+endif
+
+ifeq ($(KBUILD_VERBOSE),1)
+ quiet =
+ Q =
+else
+ quiet=quiet_
+ Q = @
+endif
+
+# If the user is running make -s (silent mode), suppress echoing of
+# commands
+
+ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
+ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
+ quiet=silent_
+endif
+else # make-3.8x
+ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
+ quiet=silent_
+endif
+endif
+
+export quiet Q KBUILD_VERBOSE
+
+# kbuild supports saving output files in a separate directory.
+# To locate output files in a separate directory two syntaxes are supported.
+# In both cases the working directory must be the root of the kernel src.
+# 1) O=
+# Use "make O=dir/to/store/output/files/"
+#
+# 2) Set KBUILD_OUTPUT
+# Set the environment variable KBUILD_OUTPUT to point to the directory
+# where the output files shall be placed.
+# export KBUILD_OUTPUT=dir/to/store/output/files/
+# make
+#
+# The O= assignment takes precedence over the KBUILD_OUTPUT environment
+# variable.
+
+# KBUILD_SRC is set on invocation of make in OBJ directory
+# KBUILD_SRC is not intended to be used by the regular user (for now)
+ifeq ($(KBUILD_SRC),)
+
+# OK, Make called in directory where kernel src resides
+# Do we want to locate output files in a separate directory?
+ifeq ("$(origin O)", "command line")
+ KBUILD_OUTPUT := $(O)
+endif
+
+# That's our default target when none is given on the command line
+PHONY := _all
+_all:
+
+# Cancel implicit rules on top Makefile
+$(CURDIR)/Makefile Makefile: ;
+
+ifneq ($(KBUILD_OUTPUT),)
+# Invoke a second make in the output directory, passing relevant variables
+# check that the output directory actually exists
+saved-output := $(KBUILD_OUTPUT)
+KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
+ && /bin/pwd)
+$(if $(KBUILD_OUTPUT),, \
+ $(error failed to create output directory "$(saved-output)"))
+
+# Look for make include files relative to root of kernel src
+#
+# This does not become effective immediately because MAKEFLAGS is re-parsed
+# once after the Makefile is read. It is OK since we are going to invoke
+# 'sub-make' below.
+MAKEFLAGS += --include-dir=$(CURDIR)
+
+PHONY += $(MAKECMDGOALS) sub-make
+
+$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
+ @:
+
+sub-make: FORCE
+ $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
+ -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
+
+# Leave processing to above invocation of make
+skip-makefile := 1
+endif # ifneq ($(KBUILD_OUTPUT),)
+endif # ifeq ($(KBUILD_SRC),)
+
+# We process the rest of the Makefile if this is the final invocation of make
+ifeq ($(skip-makefile),)
+
+# Do not print "Entering directory ...",
+# but we want to display it when entering to the output directory
+# so that IDEs/editors are able to understand relative filenames.
+MAKEFLAGS += --no-print-directory
+
+# Call a source code checker (by default, "sparse") as part of the
+# C compilation.
+#
+# Use 'make C=1' to enable checking of only re-compiled files.
+# Use 'make C=2' to enable checking of *all* source files, regardless
+# of whether they are re-compiled or not.
+#
+# See the file "doc/sparse.txt" for more details, including
+# where to get the "sparse" utility.
+
+ifeq ("$(origin C)", "command line")
+ KBUILD_CHECKSRC = $(C)
+endif
+ifndef KBUILD_CHECKSRC
+ KBUILD_CHECKSRC = 0
+endif
+
+# Use make M=dir to specify directory of external module to build
+# Old syntax make ... SUBDIRS=$PWD is still supported
+# Setting the environment variable KBUILD_EXTMOD take precedence
+ifdef SUBDIRS
+ KBUILD_EXTMOD ?= $(SUBDIRS)
+endif
+
+ifeq ("$(origin M)", "command line")
+ KBUILD_EXTMOD := $(M)
+endif
+
+# If building an external module we do not care about the all: rule
+# but instead _all depend on modules
+PHONY += all
+ifeq ($(KBUILD_EXTMOD),)
+_all: all
+else
+_all: modules
+endif
+
+ifeq ($(KBUILD_SRC),)
+ # building in the source tree
+ srctree := .
+else
+ ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
+ # building in a subdirectory of the source tree
+ srctree := ..
+ else
+ srctree := $(KBUILD_SRC)
+ endif
+endif
+objtree := .
+src := $(srctree)
+obj := $(objtree)
+
+VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
+
+export srctree objtree VPATH
+
+# Make sure CDPATH settings don't interfere
+unexport CDPATH
+
+#########################################################################
+
+HOSTARCH := $(shell uname -m | \
+ sed -e s/i.86/x86/ \
+ -e s/sun4u/sparc64/ \
+ -e s/arm.*/arm/ \
+ -e s/sa110/arm/ \
+ -e s/ppc64/powerpc/ \
+ -e s/ppc/powerpc/ \
+ -e s/macppc/powerpc/\
+ -e s/sh.*/sh/)
+
+HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
+ sed -e 's/\(cygwin\).*/cygwin/')
+
+export HOSTARCH HOSTOS
+
+#########################################################################
+
+# set default to nothing for native builds
+ifeq ($(HOSTARCH),$(ARCH))
+CROSS_COMPILE ?=
+endif
+
+KCONFIG_CONFIG ?= .config
+export KCONFIG_CONFIG
+
+# SHELL used by kbuild
+CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
+ else if [ -x /bin/bash ]; then echo /bin/bash; \
+ else echo sh; fi ; fi)
+
+HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null)
+HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null)
+HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
+
+HOSTCC = cc
+HOSTCXX = c++
+KBUILD_HOSTCFLAGS := -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
+ $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
+KBUILD_HOSTCXXFLAGS := -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
+KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS)
+KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
+
+# With the move to GCC 6, we have implicitly upgraded our language
+# standard to GNU11 (see https://gcc.gnu.org/gcc-5/porting_to.html).
+# Some Linux distributions (including RHEL7, SLES13, Debian 8) still
+# have older compilers as their default, so we make it explicit for
+# these that our host tools are GNU11 (i.e. C11 w/ GNU extensions).
+CSTD_FLAG := -std=gnu11
+KBUILD_HOSTCFLAGS += $(CSTD_FLAG)
+
+ifeq ($(HOSTOS),cygwin)
+KBUILD_HOSTCFLAGS += -ansi
+endif
+
+# Mac OS X / Darwin's C preprocessor is Apple specific. It
+# generates numerous errors and warnings. We want to bypass it
+# and use GNU C's cpp. To do this we pass the -traditional-cpp
+# option to the compiler. Note that the -traditional-cpp flag
+# DOES NOT have the same semantics as GNU C's flag, all it does
+# is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
+#
+# Apple's linker is similar, thanks to the new 2 stage linking
+# multiple symbol definitions are treated as errors, hence the
+# -multiply_defined suppress option to turn off this error.
+#
+ifeq ($(HOSTOS),darwin)
+# get major and minor product version (e.g. '10' and '6' for Snow Leopard)
+DARWIN_MAJOR_VERSION := $(shell sw_vers -productVersion | cut -f 1 -d '.')
+DARWIN_MINOR_VERSION := $(shell sw_vers -productVersion | cut -f 2 -d '.')
+
+os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
+ $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
+
+os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
+ $(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
+
+# Snow Leopards build environment has no longer restrictions as described above
+HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
+KBUILD_HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
+KBUILD_HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
+
+# macOS Mojave (10.14.X)
+# Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
+KBUILD_HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
+endif
+
+# Decide whether to build built-in, modular, or both.
+# Normally, just do built-in.
+
+KBUILD_MODULES :=
+KBUILD_BUILTIN := 1
+
+# If we have only "make modules", don't compile built-in objects.
+# When we're building modules with modversions, we need to consider
+# the built-in objects during the descend as well, in order to
+# make sure the checksums are up to date before we record them.
+
+ifeq ($(MAKECMDGOALS),modules)
+ KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
+endif
+
+# If we have "make <whatever> modules", compile modules
+# in addition to whatever we do anyway.
+# Just "make" or "make all" shall build modules as well
+
+# U-Boot does not need modules
+#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
+# KBUILD_MODULES := 1
+#endif
+
+#ifeq ($(MAKECMDGOALS),)
+# KBUILD_MODULES := 1
+#endif
+
+# Check ths size of a binary:
+# Args:
+# $1: File to check
+# #2: Size limit in bytes (decimal or 0xhex)
+define size_check
+ actual=$$( wc -c $1 | awk '{print $$1}'); \
+ limit=$$( printf "%d" $2 ); \
+ if test $$actual -gt $$limit; then \
+ echo "$1 exceeds file size limit:" >&2; \
+ echo " limit: $$(printf %#x $$limit) bytes" >&2; \
+ echo " actual: $$(printf %#x $$actual) bytes" >&2; \
+ echo " excess: $$(printf %#x $$((actual - limit))) bytes" >&2;\
+ exit 1; \
+ fi
+endef
+export size_check
+
+export KBUILD_MODULES KBUILD_BUILTIN
+export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
+
+# We need some generic definitions (do not try to remake the file).
+scripts/Kbuild.include: ;
+include scripts/Kbuild.include
+
+# Make variables (CC, etc...)
+
+AS = $(CROSS_COMPILE)as
+# Always use GNU ld
+ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
+LD = $(CROSS_COMPILE)ld.bfd
+else
+LD = $(CROSS_COMPILE)ld
+endif
+CC = $(CROSS_COMPILE)gcc
+CPP = $(CC) -E
+AR = $(CROSS_COMPILE)ar
+NM = $(CROSS_COMPILE)nm
+LDR = $(CROSS_COMPILE)ldr
+STRIP = $(CROSS_COMPILE)strip
+OBJCOPY = $(CROSS_COMPILE)objcopy
+OBJDUMP = $(CROSS_COMPILE)objdump
+LEX = flex
+YACC = bison
+AWK = awk
+PERL = perl
+PYTHON ?= python
+PYTHON2 = python2
+PYTHON3 ?= python3
+
+# The devicetree compiler and pylibfdt are automatically built unless DTC is
+# provided. If DTC is provided, it is assumed the pylibfdt is available too.
+DTC_INTREE := $(objtree)/scripts/dtc/dtc
+DTC ?= $(DTC_INTREE)
+DTC_MIN_VERSION := 010406
+
+CHECK = sparse
+
+CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
+ -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
+
+KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
+
+KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
+ -Wno-format-security \
+ -fno-builtin -ffreestanding $(CSTD_FLAG)
+KBUILD_CFLAGS += -fshort-wchar -fno-strict-aliasing
+KBUILD_AFLAGS := -D__ASSEMBLY__
+KBUILD_LDFLAGS :=
+
+ifeq ($(cc-name),clang)
+ifneq ($(CROSS_COMPILE),)
+CLANG_TARGET := --target=$(notdir $(CROSS_COMPILE:%-=%))
+LDPPFLAGS += $(CLANG_TARGET)
+GCC_TOOLCHAIN_DIR := $(dir $(shell which $(LD)))
+CLANG_PREFIX := --prefix=$(GCC_TOOLCHAIN_DIR)
+GCC_TOOLCHAIN := $(realpath $(GCC_TOOLCHAIN_DIR)/..)
+endif
+ifneq ($(GCC_TOOLCHAIN),)
+CLANG_GCC_TC := --gcc-toolchain=$(GCC_TOOLCHAIN)
+endif
+KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
+KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
+KBUILD_CFLAGS += $(call cc-option, -no-integrated-as)
+KBUILD_AFLAGS += $(call cc-option, -no-integrated-as)
+endif
+
+# Don't generate position independent code
+KBUILD_CFLAGS += $(call cc-option,-fno-PIE)
+KBUILD_AFLAGS += $(call cc-option,-fno-PIE)
+
+# Read UBOOTRELEASE from include/config/uboot.release (if it exists)
+UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
+UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
+
+export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
+export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
+export CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
+export CPP AR NM LDR STRIP OBJCOPY OBJDUMP KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
+export MAKE LEX YACC AWK PERL PYTHON PYTHON2 PYTHON3
+export HOSTCXX KBUILD_HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS
+
+export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
+export KBUILD_CFLAGS KBUILD_AFLAGS
+
+export CC_VERSION_TEXT := $(shell $(CC) --version | head -n 1)
+
+# When compiling out-of-tree modules, put MODVERDIR in the module
+# tree rather than in the kernel tree. The kernel tree might
+# even be read-only.
+export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
+
+# Files to ignore in find ... statements
+
+export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
+ -name CVS -o -name .pc -o -name .hg -o -name .git \) \
+ -prune -o
+export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
+ --exclude CVS --exclude .pc --exclude .hg --exclude .git
+
+# ===========================================================================
+# Rules shared between *config targets and build targets
+
+# Basic helpers built in scripts/
+PHONY += scripts_basic
+scripts_basic:
+ $(Q)$(MAKE) $(build)=scripts/basic
+ $(Q)rm -f .tmp_quiet_recordmcount
+
+# To avoid any implicit rule to kick in, define an empty command.
+scripts/basic/%: scripts_basic ;
+
+PHONY += outputmakefile
+# outputmakefile generates a Makefile in the output directory, if using a
+# separate output directory. This allows convenient use of make in the
+# output directory.
+outputmakefile:
+ifneq ($(KBUILD_SRC),)
+ $(Q)ln -fsn $(srctree) source
+ $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile $(srctree)
+endif
+
+# To make sure we do not include .config for any of the *config targets
+# catch them early, and hand them over to scripts/kconfig/Makefile
+# It is allowed to specify more targets when calling make, including
+# mixing *config targets and build targets.
+# For example 'make oldconfig all'.
+# Detect when mixed targets is specified, and make a second invocation
+# of make so .config is not included in this case either (for *config).
+
+version_h := include/generated/version_autogenerated.h
+timestamp_h := include/generated/timestamp_autogenerated.h
+defaultenv_h := include/generated/defaultenv_autogenerated.h
+dt_h := include/generated/dt.h
+env_h := include/generated/environment.h
+
+no-dot-config-targets := clean clobber mrproper distclean \
+ help %docs check% coccicheck \
+ ubootversion backup tests check pcheck qcheck tcheck \
+ pylint pylint_err _pip pip pip_test pip_release
+
+config-targets := 0
+mixed-targets := 0
+dot-config := 1
+
+ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
+ ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
+ dot-config := 0
+ endif
+endif
+
+ifeq ($(KBUILD_EXTMOD),)
+ ifneq ($(filter config %config,$(MAKECMDGOALS)),)
+ config-targets := 1
+ ifneq ($(words $(MAKECMDGOALS)),1)
+ mixed-targets := 1
+ endif
+ endif
+endif
+
+ifeq ($(mixed-targets),1)
+# ===========================================================================
+# We're called with mixed targets (*config and build targets).
+# Handle them one by one.
+
+PHONY += $(MAKECMDGOALS) __build_one_by_one
+
+$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
+ @:
+
+__build_one_by_one:
+ $(Q)set -e; \
+ for i in $(MAKECMDGOALS); do \
+ $(MAKE) -f $(srctree)/Makefile $$i; \
+ done
+
+else
+ifeq ($(config-targets),1)
+# ===========================================================================
+# *config targets only - make sure prerequisites are updated, and descend
+# in scripts/kconfig to make the *config target
+
+KBUILD_DEFCONFIG := sandbox_defconfig
+export KBUILD_DEFCONFIG KBUILD_KCONFIG
+
+config: scripts_basic outputmakefile FORCE
+ $(Q)$(MAKE) $(build)=scripts/kconfig $@
+
+%config: scripts_basic outputmakefile FORCE
+ $(Q)$(MAKE) $(build)=scripts/kconfig $@
+
+else
+# ===========================================================================
+# Build targets only - this includes vmlinux, arch specific targets, clean
+# targets and others. In general all targets except *config targets.
+
+# Additional helpers built in scripts/
+# Carefully list dependencies so we do not try to build scripts twice
+# in parallel
+PHONY += scripts
+scripts: scripts_basic scripts_dtc include/config/auto.conf
+ $(Q)$(MAKE) $(build)=$(@)
+
+ifeq ($(dot-config),1)
+# Read in config
+-include include/config/auto.conf
+
+# Read in dependencies to all Kconfig* files, make sure to run
+# oldconfig if changes are detected.
+-include include/config/auto.conf.cmd
+
+# To avoid any implicit rule to kick in, define an empty command
+$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
+
+# If .config is newer than include/config/auto.conf, someone tinkered
+# with it and forgot to run make oldconfig.
+# if auto.conf.cmd is missing then we are probably in a cleaned tree so
+# we execute the config step to be sure to catch updated Kconfig files
+include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
+ $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
+ @# If the following part fails, include/config/auto.conf should be
+ @# deleted so "make silentoldconfig" will be re-run on the next build.
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
+ { rm -f include/config/auto.conf; false; }
+ @# include/config.h has been updated after "make silentoldconfig".
+ @# We need to touch include/config/auto.conf so it gets newer
+ @# than include/config.h.
+ @# Otherwise, 'make silentoldconfig' would be invoked twice.
+ $(Q)touch include/config/auto.conf
+
+u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
+
+-include include/autoconf.mk
+-include include/autoconf.mk.dep
+
+# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
+# is up-to-date. When we switch to a different board configuration, old CONFIG
+# macros are still remaining in include/config/auto.conf. Without the following
+# gimmick, wrong config.mk would be included leading nasty warnings/errors.
+ifneq ($(wildcard $(KCONFIG_CONFIG)),)
+ifneq ($(wildcard include/config/auto.conf),)
+autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
+ include/config/auto.conf)
+ifeq ($(autoconf_is_old),)
+include config.mk
+include arch/$(ARCH)/Makefile
+endif
+endif
+endif
+
+# These are set by the arch-specific config.mk. Make sure they are exported
+# so they can be used when building an EFI application.
+export EFI_LDS # Filename of EFI link script in arch/$(ARCH)/lib
+export EFI_CRT0 # Filename of EFI CRT0 in arch/$(ARCH)/lib
+export EFI_RELOC # Filename of EFU relocation code in arch/$(ARCH)/lib
+export CFLAGS_EFI # Compiler flags to add when building EFI app
+export CFLAGS_NON_EFI # Compiler flags to remove when building EFI app
+export EFI_TARGET # binutils target if EFI is natively supported
+
+export LTO_ENABLE
+
+# This is y if LTO is enabled for this build. See NO_LTO=1 to disable LTO
+ifeq ($(NO_LTO),)
+LTO_ENABLE=$(if $(CONFIG_LTO),y)
+endif
+
+# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
+# that (or fail if absent). Otherwise, search for a linker script in a
+# standard location.
+
+ifndef LDSCRIPT
+ #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
+ ifdef CONFIG_SYS_LDSCRIPT
+ # need to strip off double quotes
+ LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
+ endif
+endif
+
+# If there is no specified link script, we look in a number of places for it
+ifndef LDSCRIPT
+ ifeq ($(wildcard $(LDSCRIPT)),)
+ LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
+ endif
+ ifeq ($(wildcard $(LDSCRIPT)),)
+ LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
+ endif
+ ifeq ($(wildcard $(LDSCRIPT)),)
+ LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
+ endif
+endif
+
+else
+# Dummy target needed, because used as prerequisite
+include/config/auto.conf: ;
+endif # $(dot-config)
+
+ifdef CONFIG_CC_OPTIMIZE_FOR_DEBUG
+KBUILD_HOSTCFLAGS := -Wall -Wstrict-prototypes -Og -g -fomit-frame-pointer \
+ $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
+# Avoid false positives -Wmaybe-uninitialized
+# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78394
+KBUILD_HOSTCFLAGS += -Wno-maybe-uninitialized
+KBUILD_HOSTCXXFLAGS := -Og -g $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
+endif
+
+#
+# Xtensa linker script cannot be preprocessed with -ansi because of
+# preprocessor operations on strings that don't make C identifiers.
+#
+ifeq ($(CONFIG_XTENSA),)
+LDPPFLAGS += -ansi
+endif
+
+ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+KBUILD_CFLAGS += -Os
+endif
+
+ifdef CONFIG_CC_OPTIMIZE_FOR_SPEED
+KBUILD_CFLAGS += -O2
+endif
+
+ifdef CONFIG_CC_OPTIMIZE_FOR_DEBUG
+KBUILD_CFLAGS += -Og -Wno-maybe-uninitialized
+# Avoid false positives -Wmaybe-uninitialized
+# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78394
+KBUILD_CFLAGS += -Wno-maybe-uninitialized
+endif
+
+LTO_CFLAGS :=
+LTO_FINAL_LDFLAGS :=
+export LTO_CFLAGS LTO_FINAL_LDFLAGS
+ifeq ($(LTO_ENABLE),y)
+ ifeq ($(cc-name),clang)
+ LTO_CFLAGS += -DLTO_ENABLE -flto
+ LTO_FINAL_LDFLAGS += -flto
+
+ AR = $(shell $(CC) -print-prog-name=llvm-ar)
+ NM = $(shell $(CC) -print-prog-name=llvm-nm)
+ else
+ NPROC := $(shell nproc 2>/dev/null || echo 1)
+ LTO_CFLAGS += -DLTO_ENABLE -flto=$(NPROC)
+ LTO_FINAL_LDFLAGS += -fuse-linker-plugin -flto=$(NPROC)
+
+ # use plugin aware tools
+ AR = $(CROSS_COMPILE)gcc-ar
+ NM = $(CROSS_COMPILE)gcc-nm
+ endif
+
+ CFLAGS_NON_EFI += $(LTO_CFLAGS)
+
+ KBUILD_CFLAGS += $(LTO_CFLAGS)
+endif
+
+ifeq ($(CONFIG_STACKPROTECTOR),y)
+KBUILD_CFLAGS += $(call cc-option,-fstack-protector-strong)
+CFLAGS_EFI += $(call cc-option,-fno-stack-protector)
+else
+KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
+endif
+KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
+
+# disable pointer signed / unsigned warnings in gcc 4.0
+KBUILD_CFLAGS += -Wno-pointer-sign
+
+# disable stringop warnings in gcc 8+
+KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
+
+KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds)
+KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds)
+KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow)
+
+# Enabled with W=2, disabled by default as noisy
+KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
+
+# change __FILE__ to the relative path from the srctree
+KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
+
+KBUILD_CFLAGS += -gdwarf-4
+# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
+# option to the assembler.
+KBUILD_AFLAGS += -gdwarf-4
+
+# Report stack usage if supported
+# ARC tools based on GCC 7.1 has an issue with stack usage
+# with naked functions, see commit message for more details
+ifndef CONFIG_ARC
+ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
+ KBUILD_CFLAGS += -fstack-usage
+endif
+endif
+
+KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
+KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
+
+ifdef CONFIG_CC_IS_CLANG
+KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
+KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
+KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
+KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
+# Quiet clang warning: comparison of unsigned expression < 0 is always false
+KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
+# CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
+# source of a reference will be _MergedGlobals and not on of the whitelisted names.
+# See modpost pattern 2
+KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
+KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
+KBUILD_CFLAGS += $(call cc-disable-warning, deprecated-non-prototype)
+endif
+
+# These warnings generated too much noise in a regular build.
+# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+
+# Prohibit date/time macros, which would make the build non-deterministic
+KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
+
+include scripts/Makefile.extrawarn
+
+# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
+KBUILD_CPPFLAGS += $(KCPPFLAGS)
+KBUILD_AFLAGS += $(KAFLAGS)
+KBUILD_CFLAGS += $(KCFLAGS)
+
+KBUILD_LDFLAGS += -z noexecstack
+KBUILD_LDFLAGS += $(call ld-option,--no-warn-rwx-segments)
+
+KBUILD_HOSTCFLAGS += $(if $(CONFIG_TOOLS_DEBUG),-g)
+
+# Use UBOOTINCLUDE when you must reference the include/ directory.
+# Needed to be compatible with the O= option
+UBOOTINCLUDE := \
+ -Iinclude \
+ $(if $(KBUILD_SRC), -I$(srctree)/include) \
+ $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
+ $(if $(CONFIG_HAS_THUMB2), \
+ $(if $(CONFIG_CPU_V7M), \
+ -I$(srctree)/arch/arm/thumb1/include), \
+ -I$(srctree)/arch/arm/thumb1/include)) \
+ -I$(srctree)/arch/$(ARCH)/include \
+ -include $(srctree)/include/linux/kconfig.h
+
+NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+
+# FIX ME
+cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
+ $(NOSTDINC_FLAGS)
+c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
+
+#########################################################################
+# U-Boot objects....order is important (i.e. start must be first)
+
+HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
+
+libs-$(CONFIG_API) += api/
+libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
+libs-y += boot/
+libs-y += cmd/
+libs-y += common/
+libs-$(CONFIG_OF_EMBED) += dts/
+libs-y += env/
+libs-y += lib/
+libs-y += fs/
+libs-y += net/
+libs-y += disk/
+libs-y += drivers/
+libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
+libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
+libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
+libs-y += drivers/usb/cdns3/
+libs-y += drivers/usb/dwc3/
+libs-y += drivers/usb/common/
+libs-y += drivers/usb/emul/
+libs-y += drivers/usb/eth/
+libs-$(CONFIG_USB_DEVICE) += drivers/usb/gadget/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
+libs-y += drivers/usb/host/
+libs-y += drivers/usb/mtu3/
+libs-y += drivers/usb/musb/
+libs-y += drivers/usb/musb-new/
+libs-y += drivers/usb/isp1760/
+libs-y += drivers/usb/phy/
+libs-y += drivers/usb/ulpi/
+ifdef CONFIG_POST
+libs-y += post/
+endif
+libs-$(CONFIG_$(SPL_TPL_)UNIT_TEST) += test/
+libs-$(CONFIG_UT_ENV) += test/env/
+libs-$(CONFIG_UT_OPTEE) += test/optee/
+libs-$(CONFIG_UT_OVERLAY) += test/overlay/
+
+libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
+
+libs-y := $(sort $(libs-y))
+
+u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
+
+u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
+
+libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
+
+u-boot-init := $(head-y)
+u-boot-main := $(libs-y)
+
+
+# Add GCC lib
+ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
+PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
+else
+ifndef CONFIG_CC_IS_CLANG
+PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
+endif
+endif
+PLATFORM_LIBS += $(PLATFORM_LIBGCC)
+
+ifdef CONFIG_CC_COVERAGE
+KBUILD_CFLAGS += --coverage
+PLATFORM_LIBGCC += -lgcov
+endif
+
+export PLATFORM_LIBS
+export PLATFORM_LIBGCC
+
+# Special flags for CPP when processing the linker script.
+# Pass the version down so we can handle backwards compatibility
+# on the fly.
+LDPPFLAGS += \
+ -include $(srctree)/include/u-boot/u-boot.lds.h \
+ -DCPUDIR=$(CPUDIR) \
+ $(shell $(LD) --version | \
+ sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
+
+#########################################################################
+#########################################################################
+
+ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
+BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
+else
+BOARD_SIZE_CHECK =
+endif
+
+ifneq ($(CONFIG_SPL_SIZE_LIMIT),0x0)
+SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
+else
+SPL_SIZE_CHECK =
+endif
+
+ifneq ($(CONFIG_TPL_SIZE_LIMIT),0x0)
+TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT))
+else
+TPL_SIZE_CHECK =
+endif
+
+ifneq ($(CONFIG_VPL_SIZE_LIMIT),0x0)
+VPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_VPL_SIZE_LIMIT))
+else
+VPL_SIZE_CHECK =
+endif
+
+# Statically apply RELA-style relocations (currently arm64 only)
+# This is useful for arm64 where static relocation needs to be performed on
+# the raw binary, but certain simulators only accept an ELF file (but don't
+# do the relocation).
+ifneq ($(CONFIG_STATIC_RELA),)
+# $(2) is u-boot ELF, $(3) is u-boot bin, $(4) is text base
+quiet_cmd_static_rela = RELOC $@
+cmd_static_rela = \
+ tools/relocate-rela $(3) $(2)
+else
+quiet_cmd_static_rela =
+cmd_static_rela =
+endif
+
+# Always append INPUTS so that arch config.mk's can add custom ones
+INPUTS-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
+
+ifeq ($(CONFIG_SPL_FSL_PBL),y)
+INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
+else
+ifneq ($(CONFIG_NXP_ESBC), y)
+# For Secure Boot The Image needs to be signed and Header must also
+# be included. So The image has to be built explicitly
+INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
+endif
+endif
+INPUTS-$(CONFIG_SPL) += spl/u-boot-spl.bin
+ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy)
+INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
+else
+ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy)
+INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
+else
+INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
+endif
+endif
+INPUTS-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
+INPUTS-$(CONFIG_VPL) += vpl/u-boot-vpl.bin
+
+# Allow omitting the .dtb output if it is not normally used
+INPUTS-$(CONFIG_OF_SEPARATE) += $(if $(CONFIG_OF_OMIT_DTB),dts/dt.dtb,u-boot.dtb)
+ifeq ($(CONFIG_SPL_FRAMEWORK),y)
+INPUTS-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
+endif
+INPUTS-$(CONFIG_SANDBOX) += u-boot.dtb
+ifneq ($(CONFIG_SPL_TARGET),)
+INPUTS-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
+endif
+INPUTS-$(CONFIG_REMAKE_ELF) += u-boot.elf
+INPUTS-$(CONFIG_EFI_APP) += u-boot-app.efi
+INPUTS-$(CONFIG_EFI_STUB) += u-boot-payload.efi
+
+# Generate this input file for binman
+ifeq ($(CONFIG_SPL),)
+INPUTS-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
+endif
+
+# Add optional build target if defined in board/cpu/soc headers
+ifneq ($(CONFIG_BUILD_TARGET),)
+INPUTS-y += $(CONFIG_BUILD_TARGET:"%"=%)
+endif
+
+ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
+INPUTS-y += init_sp_bss_offset_check
+endif
+
+ifeq ($(CONFIG_ARCH_ROCKCHIP)_$(CONFIG_SPL_FRAMEWORK),y_)
+INPUTS-y += u-boot.img
+endif
+
+INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
+ $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
+ $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin)
+
+LDFLAGS_u-boot += $(LDFLAGS_FINAL)
+
+# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
+LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker)
+
+# ld.lld support
+LDFLAGS_u-boot += -z notext $(call ld-option,--apply-dynamic-relocs)
+
+LDFLAGS_u-boot += --build-id=none
+
+ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),)
+LDFLAGS_u-boot += -Ttext $(CONFIG_TEXT_BASE)
+endif
+
+# insure the checker run with the right endianness
+CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian)
+
+# the checker needs the correct machine size
+CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32)
+
+# Normally we fill empty space with 0xff
+quiet_cmd_objcopy = OBJCOPY $@
+cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
+ $(OBJCOPYFLAGS_$(@F)) $< $@
+
+# Provide a version which does not do this, for use by EFI
+quiet_cmd_zobjcopy = OBJCOPY $@
+cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
+
+quiet_cmd_efipayload = OBJCOPY $@
+cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
+
+MKIMAGEOUTPUT ?= /dev/null
+
+quiet_cmd_mkimage = MKIMAGE $@
+cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
+ >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
+
+quiet_cmd_mkfitimage = MKIMAGE $@
+cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) \
+ -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@ \
+ >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
+
+quiet_cmd_cat = CAT $@
+cmd_cat = cat $(filter-out $(PHONY), $^) > $@
+
+append = cat $(filter-out $< $(PHONY), $^) >> $@
+
+quiet_cmd_pad_cat = CAT $@
+cmd_pad_cat = $(cmd_objcopy) && $(append) || { rm -f $@; false; }
+
+quiet_cmd_lzma = LZMA $@
+cmd_lzma = lzma -c -z -k -9 $< > $@
+
+cfg: u-boot.cfg
+
+quiet_cmd_ofcheck = OFCHK $2
+cmd_ofcheck = $(srctree)/scripts/check-of.sh $2 \
+ $(srctree)/scripts/of_allowlist.txt
+
+# Concat the value of all the CONFIGs (result is 'y' or 'yy', etc. )
+got = $(foreach cfg,$(1),$($(cfg)))
+
+# expected value 'y for each one
+expect = $(foreach cfg,$(1),y)
+
+# Show a deprecation message
+# Args:
+# 1: List of options to migrate to (e.g. "CONFIG_DM_MMC CONFIG_BLK")
+# 2: Name of component (e.g . "Ethernet drivers")
+# 3: Release deadline (e.g. "v202.07")
+# 4: Condition to require before checking (e.g. "$(CONFIG_NET)")
+# Note: Script avoids bash construct, hence the strange double 'if'
+# (patches welcome!)
+define deprecated
+ @if [ -n "$(strip $(4))" ]; then if [ "$(got)" != "$(expect)" ]; then \
+ echo >&2 "===================== WARNING ======================"; \
+ echo >&2 "This board does not use $(firstword $(1)) (Driver Model"; \
+ echo >&2 "for $(2)). Please update the board to use"; \
+ echo >&2 "$(firstword $(1)) before the $(3) release. Failure to"; \
+ echo >&2 "update by the deadline may result in board removal."; \
+ echo >&2 "See doc/develop/driver-model/migration.rst for more info."; \
+ echo >&2 "===================================================="; \
+ fi; fi
+
+endef
+
+# Timestamp file to make sure that binman always runs
+.binman_stamp: $(INPUTS-y) FORCE
+ifeq ($(CONFIG_BINMAN),y)
+ $(call if_changed,binman)
+endif
+ @touch $@
+
+all: .binman_stamp
+
+ifeq ($(CONFIG_DEPRECATED),y)
+ $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
+endif
+ifeq ($(CONFIG_OF_EMBED)$(CONFIG_EFI_APP),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
+ @echo >&2 "be used for debugging purposes. Please use"
+ @echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
+ @echo >&2 "See doc/develop/devicetree/control.rst for more info."
+ @echo >&2 "===================================================="
+endif
+ifneq ($(CONFIG_SPL_FIT_GENERATOR),)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board uses CONFIG_SPL_FIT_GENERATOR. Please migrate"
+ @echo >&2 "to binman instead, to avoid the proliferation of"
+ @echo >&2 "arch-specific scripts with no tests."
+ @echo >&2 "===================================================="
+endif
+ $(call deprecated,CONFIG_WDT,DM watchdog,v2019.10,\
+ $(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG))
+ $(call deprecated,CONFIG_DM_I2C,I2C drivers,v2022.04,$(CONFIG_SYS_I2C_LEGACY))
+ @# CFG_SYS_TIMER_RATE has brackets in it for some boards which
+ @# confuses this rule. Use if() to send just a single character which
+ @# is enable to tell 'deprecated' that one of these symbols exists
+ $(call deprecated,CONFIG_TIMER,Timer drivers,v2023.01,$(if $(strip $(CFG_SYS_TIMER_RATE)$(CFG_SYS_TIMER_COUNTER)),x))
+ $(call deprecated,CONFIG_DM_SERIAL,Serial drivers,v2023.04,$(CONFIG_SERIAL))
+ $(call deprecated,CONFIG_DM_SCSI,SCSI drivers,v2023.04,$(CONFIG_SCSI))
+ @# Check that this build does not override OF_HAS_PRIOR_STAGE by
+ @# disabling OF_BOARD.
+ $(call cmd,ofcheck,$(KCONFIG_CONFIG))
+
+PHONY += dtbs
+dtbs: dts/dt.dtb
+ @:
+dts/dt.dtb: u-boot
+ $(Q)$(MAKE) $(build)=dts dtbs
+
+quiet_cmd_copy = COPY $@
+ cmd_copy = cp $< $@
+
+ifeq ($(CONFIG_MULTI_DTB_FIT),y)
+
+ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
+FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
+else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
+FINAL_DTB_CONTAINER = fit-dtb.blob.gz
+else
+FINAL_DTB_CONTAINER = fit-dtb.blob
+endif
+
+fit-dtb.blob.gz: fit-dtb.blob
+ @gzip -kf9 $< > $@
+
+fit-dtb.blob.lzo: fit-dtb.blob
+ @lzop -f9 $< > $@
+
+fit-dtb.blob: dts/dt.dtb FORCE
+ $(call if_changed,mkimage)
+ifneq ($(SOURCE_DATE_EPOCH),)
+ touch -d @$(SOURCE_DATE_EPOCH) fit-dtb.blob
+ chmod 0600 fit-dtb.blob
+endif
+
+MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
+ -a 0 -e 0 -E \
+ $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
+
+MKIMAGEFLAGS_fit-dtb.blob += -B 0x8
+
+ifneq ($(EXT_DTB),)
+u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB)
+ $(call if_changed,cat)
+else
+u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
+ $(call if_changed,cat)
+endif
+
+u-boot.bin: u-boot-fit-dtb.bin FORCE
+ $(call if_changed,copy)
+
+ifneq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
+u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
+ $(call if_changed,cat)
+endif
+
+else ifeq ($(CONFIG_OF_SEPARATE).$(CONFIG_OF_OMIT_DTB),y.)
+
+ifneq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
+u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
+ $(call if_changed,cat)
+endif
+
+u-boot.bin: u-boot-dtb.bin FORCE
+ $(call if_changed,copy)
+
+else
+u-boot.bin: u-boot-nodtb.bin FORCE
+ $(call if_changed,copy)
+endif
+
+# we call Makefile in arch/arm/mach-imx which
+# has targets which are dependent on targets defined
+# here. make could not resolve them and we must ensure
+# that they are finished before calling imx targets
+ifeq ($(CONFIG_MULTI_DTB_FIT),y)
+IMX_DEPS = u-boot-fit-dtb.bin
+endif
+
+%.imx: $(IMX_DEPS) %.bin
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+ $(BOARD_SIZE_CHECK)
+
+%.vyb: %.imx
+ $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
+
+quiet_cmd_copy = COPY $@
+ cmd_copy = cp $< $@
+
+u-boot.dtb: dts/dt.dtb
+ $(call cmd,copy)
+
+OBJCOPYFLAGS_u-boot.hex := -O ihex
+
+OBJCOPYFLAGS_u-boot.srec := -O srec
+
+u-boot.hex u-boot.srec: u-boot FORCE
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec)
+
+u-boot-elf.srec: u-boot.elf FORCE
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-spl.srec = $(OBJCOPYFLAGS_u-boot.srec)
+
+spl/u-boot-spl.srec: spl/u-boot-spl FORCE
+ $(call if_changed,objcopy)
+
+%.scif: %.srec
+ $(Q)$(MAKE) $(build)=arch/arm/mach-rmobile $@
+
+OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
+ $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
+ $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),$(if $(CONFIG_OF_SEPARATE),-R .bootpg -R .resetvec))
+
+binary_size_check: u-boot-nodtb.bin FORCE
+ @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
+ map_size=$(shell cat u-boot.map | \
+ awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
+ | sed 's/0X//g' \
+ | bc); \
+ if [ "" != "$$map_size" ]; then \
+ if test $$map_size -ne $$file_size; then \
+ echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
+ echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \
+ exit 1; \
+ fi; \
+ fi
+
+ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
+ifneq ($(CONFIG_SYS_MALLOC_F_LEN),)
+subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN)))
+else
+subtract_sys_malloc_f_len = true
+endif
+# The 1/4 margin below is somewhat arbitrary. The likely initial SP usage is
+# so low that the DTB could probably use 90%+ of the available space, for
+# current values of CONFIG_SYS_INIT_SP_BSS_OFFSET at least. However, let's be
+# safe for now and tweak this later if space becomes tight.
+# A rejected alternative would be to check that some absolute minimum stack
+# space was available. However, since CONFIG_SYS_INIT_SP_BSS_OFFSET is
+# deliberately build-specific, to take account of build-to-build stack usage
+# differences due to different feature sets, there is no common absolute value
+# to check against.
+init_sp_bss_offset_check: u-boot.dtb FORCE
+ @dtb_size=$(shell wc -c u-boot.dtb | awk '{print $$1}') ; \
+ space=$(CONFIG_SYS_INIT_SP_BSS_OFFSET) ; \
+ $(subtract_sys_malloc_f_len) ; \
+ quarter_space=$$(($${space} / 4)) ; \
+ if [ $${dtb_size} -gt $${quarter_space} ]; then \
+ echo "u-boot.dtb is larger than 1 quarter of " >&2 ; \
+ echo "(CONFIG_SYS_INIT_SP_BSS_OFFSET - CONFIG_SYS_MALLOC_F_LEN)" >&2 ; \
+ exit 1 ; \
+ fi
+endif
+
+shell_cmd = { $(call echo-cmd,$(1)) $(cmd_$(1)); }
+
+quiet_cmd_objcopy_uboot = OBJCOPY $@
+ifdef cmd_static_rela
+cmd_objcopy_uboot = $(cmd_objcopy) && $(call shell_cmd,static_rela,$<,$@,$(CONFIG_TEXT_BASE)) || { rm -f $@; false; }
+else
+cmd_objcopy_uboot = $(cmd_objcopy)
+endif
+
+u-boot-nodtb.bin: u-boot FORCE
+ $(call if_changed,objcopy_uboot)
+ $(BOARD_SIZE_CHECK)
+
+u-boot.ldr: u-boot
+ $(CREATE_LDR_ENV)
+ $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
+ $(BOARD_SIZE_CHECK)
+
+# binman
+# ---------------------------------------------------------------------------
+# Use 'make BINMAN_DEBUG=1' to enable debugging
+# Use 'make BINMAN_VERBOSE=3' to set vebosity level
+default_dt := $(if $(DEVICE_TREE),$(DEVICE_TREE),$(CONFIG_DEFAULT_DEVICE_TREE))
+
+quiet_cmd_binman = BINMAN $@
+cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
+ $(foreach f,$(BINMAN_TOOLPATHS),--toolpath $(f)) \
+ --toolpath $(objtree)/tools \
+ $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
+ build -u -d u-boot.dtb -O . -m \
+ $(if $(BINMAN_ALLOW_MISSING),--allow-missing --ignore-missing) \
+ -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
+ -I arch/$(ARCH)/dts -a of-list=$(CONFIG_OF_LIST) \
+ $(foreach f,$(BINMAN_INDIRS),-I $(f)) \
+ -a atf-bl31-path=${BL31} \
+ -a tee-os-path=${TEE} \
+ -a opensbi-path=${OPENSBI} \
+ -a default-dt=$(default_dt) \
+ -a scp-path=$(SCP) \
+ -a rockchip-tpl-path=$(ROCKCHIP_TPL) \
+ -a spl-bss-pad=$(if $(CONFIG_SPL_SEPARATE_BSS),,1) \
+ -a tpl-bss-pad=$(if $(CONFIG_TPL_SEPARATE_BSS),,1) \
+ -a spl-dtb=$(CONFIG_SPL_OF_REAL) \
+ -a tpl-dtb=$(CONFIG_TPL_OF_REAL) \
+ -a pre-load-key-path=${PRE_LOAD_KEY_PATH} \
+ $(BINMAN_$(@F))
+
+OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
+
+OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
+
+u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
+ $(call if_changed,objcopy)
+
+#
+# U-Boot entry point, needed for booting of full-blown U-Boot
+# from the SPL U-Boot version.
+#
+ifndef CFG_SYS_UBOOT_START
+CFG_SYS_UBOOT_START := $(CONFIG_TEXT_BASE)
+endif
+
+# Boards with more complex image requirements can provide an .its source file
+# or a generator script
+# NOTE: Please do not use this. We are migrating away from Makefile rules to use
+# binman instead.
+ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
+U_BOOT_ITS := u-boot.its
+$(U_BOOT_ITS): $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
+ $(call if_changed,copy)
+else
+ifneq ($(CONFIG_USE_SPL_FIT_GENERATOR),)
+U_BOOT_ITS := u-boot.its
+$(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
+ $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
+ $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
+endif
+endif
+
+ifdef CONFIG_SPL_LOAD_FIT
+MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
+ -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+ -p $(CONFIG_FIT_EXTERNAL_OFFSET) \
+ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
+ $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \
+ $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) \
+ $(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
+else
+MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
+ -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
+MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
+ -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
+u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
+endif
+
+MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
+
+# Some boards have the kwbimage.cfg file written in advance, while some
+# other boards generate it on the fly during the build in the build tree.
+# Let's check if the file exists in the build tree first, otherwise we
+# fall back to use the one in the source tree.
+KWD_CONFIG_FILE = $(shell \
+ if [ -f $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) ]; then \
+ echo -n $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
+ else \
+ echo -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
+ fi)
+
+MKIMAGEFLAGS_u-boot.kwb = -n $(KWD_CONFIG_FILE) \
+ -T kwbimage -a $(CONFIG_TEXT_BASE) -e $(CONFIG_TEXT_BASE)
+
+MKIMAGEFLAGS_u-boot-with-spl.kwb = -n $(KWD_CONFIG_FILE) \
+ -T kwbimage -a $(CONFIG_TEXT_BASE) -e $(CONFIG_TEXT_BASE) \
+ $(if $(KEYDIR),-k $(KEYDIR))
+
+MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
+ -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -A $(ARCH) -T pblimage
+
+UBOOT_BIN := u-boot.bin
+
+MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \
+ -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
+
+u-boot.bin.lzma: u-boot.bin FORCE
+ $(call if_changed,lzma)
+
+u-boot-lzma.img: u-boot.bin.lzma FORCE
+ $(call if_changed,mkimage)
+
+u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
+ $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
+ $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX),dts/dt.dtb) \
+ ,$(UBOOT_BIN)) FORCE
+ $(call if_changed,mkimage)
+ $(BOARD_SIZE_CHECK)
+
+ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
+MKIMAGEFLAGS_u-boot.itb =
+else
+MKIMAGEFLAGS_u-boot.itb = -E
+endif
+MKIMAGEFLAGS_u-boot.itb += -B 0x8
+
+ifdef U_BOOT_ITS
+u-boot.itb: u-boot-nodtb.bin \
+ $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX),dts/dt.dtb) \
+ $(if $(CONFIG_MULTI_DTB_FIT),$(FINAL_DTB_CONTAINER)) \
+ $(U_BOOT_ITS) FORCE
+ $(call if_changed,mkfitimage)
+ $(BOARD_SIZE_CHECK)
+endif
+
+u-boot-with-spl.kwb: u-boot.bin spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+ $(BOARD_SIZE_CHECK)
+
+u-boot.dis: u-boot
+ $(OBJDUMP) -d $< > $@
+
+ifneq ($(CONFIG_SPL_PAYLOAD),)
+SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
+else
+SPL_PAYLOAD := u-boot.bin
+endif
+
+SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
+
+OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
+ --pad-to=$(CONFIG_SPL_PAD_TO)
+u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
+ $(call if_changed,pad_cat)
+
+ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
+MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
+
+lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
+
+lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
+
+lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
+ $(call if_changed,objcopy)
+
+lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
+ $(call if_changed,cat)
+
+endif
+
+OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
+ --pad-to=$(CONFIG_TPL_PAD_TO)
+tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
+ $(call if_changed,pad_cat)
+
+SPL: spl/u-boot-spl.bin FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
+#ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
+ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
+u-boot.cnt: u-boot.bin FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
+flash.bin: spl/u-boot-spl.bin u-boot.cnt FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+else
+ifeq ($(CONFIG_BINMAN),y)
+flash.bin: spl/u-boot-spl.bin $(INPUTS-y) FORCE
+ $(call if_changed,binman)
+else
+flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+endif
+endif
+#endif
+
+u-boot.uim: u-boot.bin FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
+u-boot-nand.imx: u-boot.imx FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
+u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
+MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_TEXT_BASE)
+
+u-boot.ubl: u-boot-with-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+MKIMAGEFLAGS_u-boot-spl.ais = -s -n "/dev/null" \
+ -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
+spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
+u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
+ $(call if_changed,pad_cat)
+
+u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
+ $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
+u-boot.sb: u-boot.bin spl/u-boot-spl.bin
+ $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
+
+MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
+ -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
+spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+ifneq ($(CONFIG_ARCH_SOCFPGA),)
+quiet_cmd_gensplx4 = GENSPLX4 $@
+cmd_gensplx4 = $(OBJCOPY) -I binary -O binary --gap-fill=0x0 \
+ --pad-to=$(CONFIG_SPL_PAD_TO) \
+ spl/u-boot-spl.sfp spl/u-boot-spl.sfp && \
+ cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
+ spl/u-boot-spl.sfp spl/u-boot-spl.sfp > $@ || { rm -f $@; false; }
+spl/u-boot-splx4.sfp: spl/u-boot-spl.sfp FORCE
+ $(call if_changed,gensplx4)
+
+quiet_cmd_socboot = SOCBOOT $@
+cmd_socboot = cat spl/u-boot-splx4.sfp u-boot.img > $@ || { rm -f $@; false; }
+u-boot-with-spl.sfp: spl/u-boot-splx4.sfp u-boot.img FORCE
+ $(call if_changed,socboot)
+
+quiet_cmd_gensplpadx4 = GENSPLPADX4 $@
+cmd_gensplpadx4 = dd if=/dev/zero of=spl/u-boot-spl.pad bs=64 count=1024 ; \
+ cat spl/u-boot-spl.sfp spl/u-boot-spl.pad \
+ spl/u-boot-spl.sfp spl/u-boot-spl.pad \
+ spl/u-boot-spl.sfp spl/u-boot-spl.pad \
+ spl/u-boot-spl.sfp spl/u-boot-spl.pad > $@ || \
+ { rm -f $@ spl/u-boot-spl.pad; false; }
+u-boot-spl-padx4.sfp: spl/u-boot-spl.sfp FORCE
+ $(call if_changed,gensplpadx4)
+
+quiet_cmd_socnandboot = SOCNANDBOOT $@
+cmd_socnandboot = cat u-boot-spl-padx4.sfp u-boot.img > $@ || { rm -f $@; false; }
+u-boot-with-nand-spl.sfp: u-boot-spl-padx4.sfp u-boot.img FORCE
+ $(call if_changed,socnandboot)
+
+endif
+
+ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
+u-boot-dtb.bin: u-boot-nodtb.bin u-boot.dtb u-boot-br.bin FORCE
+ $(call if_changed,binman)
+
+OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
+u-boot-br.bin: u-boot FORCE
+ $(call if_changed,objcopy)
+endif
+
+quiet_cmd_ldr = LD $@
+cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
+ $(filter-out FORCE,$^) -o $@
+
+ifdef CONFIG_X86
+OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16
+u-boot-x86-start16.bin: u-boot FORCE
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec
+u-boot-x86-reset16.bin: u-boot FORCE
+ $(call if_changed,objcopy)
+
+endif # CONFIG_X86
+
+OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
+u-boot-app.efi: u-boot FORCE
+ $(call if_changed,zobjcopy)
+
+u-boot.bin.o: u-boot.bin FORCE
+ $(call if_changed,efipayload)
+
+u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
+ $(call if_changed_dep,cpp_lds)
+
+# Rule to link the EFI payload which contains a stub and a U-Boot binary
+quiet_cmd_u-boot_payload ?= LD $@
+ cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
+ -T u-boot-payload.lds arch/x86/cpu/call32.o \
+ lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
+ $(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
+
+u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
+ $(call if_changed,u-boot_payload)
+
+OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
+u-boot-payload.efi: u-boot-payload FORCE
+ $(call if_changed,zobjcopy)
+
+u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
+ $(call if_changed,cat)
+
+#Add a target to create boot binary having SPL binary in PBI format
+#concatenated with u-boot binary. It is need by PowerPC SoC having
+#internal SRAM <= 512KB.
+MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
+ -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
+ -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
+
+spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+ifeq ($(ARCH),arm)
+UBOOT_BINLOAD := u-boot.img
+else
+UBOOT_BINLOAD := u-boot.bin
+endif
+
+OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
+ --gap-fill=0xff
+
+u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
+ $(call if_changed,pad_cat)
+
+quiet_cmd_u-boot-elf ?= LD $@
+ cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
+ $(if $(CONFIG_SYS_BIG_ENDIAN),-EB,-EL) \
+ -T u-boot-elf.lds --defsym=$(CONFIG_PLATFORM_ELFENTRY)=$(CONFIG_TEXT_BASE) \
+ -Ttext=$(CONFIG_TEXT_BASE)
+u-boot.elf: u-boot.bin u-boot-elf.lds
+ $(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
+ $(call if_changed,u-boot-elf)
+
+u-boot-elf.lds: arch/u-boot-elf.lds prepare FORCE
+ $(call if_changed_dep,cpp_lds)
+
+# MediaTek's ARM-based u-boot needs a header to contains its load address
+# which is parsed by the BootROM.
+# If the SPL build is enabled, the header will be added to the spl binary,
+# and the spl binary and the u-boot.img will be combined into one file.
+# Otherwise the header will be added to the u-boot.bin directly.
+
+ifeq ($(CONFIG_SPL),y)
+spl/u-boot-spl-mtk.bin: spl/u-boot-spl
+
+u-boot-mtk.bin: u-boot-with-spl.bin
+ $(call if_changed,copy)
+else
+MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
+ -a $(CONFIG_TEXT_BASE) -e $(CONFIG_TEXT_BASE) \
+ -n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
+
+u-boot-mtk.bin: u-boot.bin FORCE
+ $(call if_changed,mkimage)
+endif
+
+quiet_cmd_endian_swap = SWAP $@
+ cmd_endian_swap = $(srctree)/tools/endian-swap.py $< $@
+
+u-boot-swap.bin: u-boot.bin FORCE
+ $(call if_changed,endian_swap)
+
+ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
+
+# Generate linker list symbols references to force compiler to not optimize
+# them away when compiling with LTO
+ifeq ($(LTO_ENABLE),y)
+u-boot-keep-syms-lto := keep-syms-lto.o
+u-boot-keep-syms-lto_c := $(patsubst %.o,%.c,$(u-boot-keep-syms-lto))
+
+quiet_cmd_keep_syms_lto = KSL $@
+ cmd_keep_syms_lto = \
+ $(srctree)/scripts/gen_ll_addressable_symbols.sh $(NM) $^ > $@
+
+quiet_cmd_keep_syms_lto_cc = KSLCC $@
+ cmd_keep_syms_lto_cc = \
+ $(CC) $(filter-out $(LTO_CFLAGS),$(c_flags)) -c -o $@ $<
+
+$(u-boot-keep-syms-lto_c): $(u-boot-main)
+ $(call if_changed,keep_syms_lto)
+$(u-boot-keep-syms-lto): $(u-boot-keep-syms-lto_c)
+ $(call if_changed,keep_syms_lto_cc)
+else
+u-boot-keep-syms-lto :=
+endif
+
+# Rule to link u-boot
+# May be overridden by arch/$(ARCH)/config.mk
+ifeq ($(LTO_ENABLE),y)
+quiet_cmd_u-boot__ ?= LTO $@
+ cmd_u-boot__ ?= \
+ $(CC) -nostdlib -nostartfiles \
+ $(LTO_FINAL_LDFLAGS) $(c_flags) \
+ $(KBUILD_LDFLAGS:%=-Wl,%) $(LDFLAGS_u-boot:%=-Wl,%) -o $@ \
+ -T u-boot.lds $(u-boot-init) \
+ -Wl,--whole-archive \
+ $(u-boot-main) \
+ $(u-boot-keep-syms-lto) \
+ $(PLATFORM_LIBS) \
+ -Wl,--no-whole-archive \
+ -Wl,-Map,u-boot.map; \
+ $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
+else
+quiet_cmd_u-boot__ ?= LD $@
+ cmd_u-boot__ ?= $(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
+ -T u-boot.lds $(u-boot-init) \
+ --whole-archive \
+ $(u-boot-main) \
+ --no-whole-archive \
+ $(PLATFORM_LIBS) -Map u-boot.map; \
+ $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
+endif
+
+quiet_cmd_smap = GEN common/system_map.o
+cmd_smap = \
+ smap=`$(call SYSTEM_MAP,u-boot) | \
+ awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
+ $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
+ -c $(srctree)/common/system_map.c -o common/system_map.o
+
+u-boot: $(u-boot-init) $(u-boot-main) $(u-boot-keep-syms-lto) u-boot.lds FORCE
+ +$(call if_changed,u-boot__)
+ifeq ($(CONFIG_KALLSYMS),y)
+ $(call cmd,smap)
+ $(call cmd,u-boot__) common/system_map.o
+endif
+
+ifeq ($(CONFIG_RISCV),y)
+ @tools/prelink-riscv $@
+endif
+
+quiet_cmd_sym ?= SYM $@
+ cmd_sym ?= $(OBJDUMP) -t $< > $@
+u-boot.sym: u-boot FORCE
+ $(call if_changed,sym)
+
+# Environment processing
+# ---------------------------------------------------------------------------
+
+# Directory where we expect the .env file, if it exists
+ENV_DIR := $(srctree)/board/$(BOARDDIR)
+
+# Basename of .env file, stripping quotes
+ENV_SOURCE_FILE := $(CONFIG_ENV_SOURCE_FILE:"%"=%)
+
+# Filename of .env file
+ENV_FILE_CFG := $(ENV_DIR)/$(ENV_SOURCE_FILE).env
+
+# Default filename, if CONFIG_ENV_SOURCE_FILE is empty
+ENV_FILE_BOARD := $(ENV_DIR)/$(CONFIG_SYS_BOARD:"%"=%).env
+
+# Select between the CONFIG_ENV_SOURCE_FILE and the default one
+ENV_FILE := $(if $(ENV_SOURCE_FILE),$(ENV_FILE_CFG),$(wildcard $(ENV_FILE_BOARD)))
+
+# Run the environment text file through the preprocessor, but only if it is
+# non-empty, to save time and possible build errors if something is wonky with
+# the board.
+# If there is no ENV_FILE, produce an empty output file, to prevent a previous
+# build's file being used in the case of in-tree builds.
+quiet_cmd_gen_envp = ENVP $@
+ cmd_gen_envp = \
+ if [ -s "$(ENV_FILE)" ]; then \
+ $(CPP) -P $(CFLAGS) -x assembler-with-cpp -D__ASSEMBLY__ \
+ -D__UBOOT_CONFIG__ \
+ -I . -I include -I $(srctree)/include \
+ -include linux/kconfig.h -include include/config.h \
+ -I$(srctree)/arch/$(ARCH)/include \
+ $< -o $@; \
+ else \
+ rm -f $@; \
+ touch $@ ; \
+ fi
+include/generated/env.in: include/generated/env.txt FORCE
+ $(call cmd,gen_envp)
+
+# Regenerate the environment if it changes
+# We use 'wildcard' since the file is not required to exist (at present), in
+# which case we don't want this dependency, but instead should create an empty
+# file
+# This rule is useful since it shows the source file for the environment
+quiet_cmd_envc = ENVC $@
+ cmd_envc = \
+ if [ -f "$<" ]; then \
+ cat $< > $@; \
+ elif [ -n "$(ENV_SOURCE_FILE)" ]; then \
+ echo "Missing file $(ENV_FILE_CFG)"; \
+ else \
+ touch $@ ; \
+ fi
+
+include/generated/env.txt: $(wildcard $(ENV_FILE)) FORCE
+ $(call cmd,envc)
+
+# Write out the resulting environment, converted to a C string
+quiet_cmd_gen_envt = ENVT $@
+ cmd_gen_envt = \
+ awk -f $(srctree)/scripts/env2string.awk $< >$@
+$(env_h): include/generated/env.in
+ $(call cmd,gen_envt)
+
+# ---------------------------------------------------------------------------
+
+# The actual objects are generated when descending,
+# make sure no implicit rule kicks in
+$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
+
+# Handle descending into subdirectories listed in $(u-boot-dirs)
+# Preset locale variables to speed up the build process. Limit locale
+# tweaks to this spot to avoid wrong language settings when running
+# make menuconfig etc.
+# Error messages still appears in the original language
+
+PHONY += $(u-boot-dirs)
+$(u-boot-dirs): prepare scripts
+ $(Q)$(MAKE) $(build)=$@
+
+tools: prepare
+# The "tools" are needed early
+$(filter-out tools, $(u-boot-dirs)): tools
+# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
+# is "yes"), so compile examples after U-Boot is compiled.
+examples: $(filter-out examples, $(u-boot-dirs))
+
+define filechk_uboot.release
+ echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
+endef
+
+# Store (new) UBOOTRELEASE string in include/config/uboot.release
+include/config/uboot.release: include/config/auto.conf FORCE
+ $(call filechk,uboot.release)
+
+
+# Things we need to do before we recursively start building the kernel
+# or the modules are listed in "prepare".
+# A multi level approach is used. prepareN is processed before prepareN-1.
+# archprepare is used in arch Makefiles and when processed asm symlink,
+# version.h and scripts_basic is processed / created.
+
+# Listed in dependency order
+PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
+
+# prepare3 is used to check if we are building in a separate output directory,
+# and if so do:
+# 1) Check that make has not been executed in the kernel src $(srctree)
+prepare3: include/config/uboot.release
+ifneq ($(KBUILD_SRC),)
+ @$(kecho) ' Using $(srctree) as source for U-Boot'
+ $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
+ echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
+ echo >&2 " in the '$(srctree)' directory.";\
+ /bin/false; \
+ fi;
+endif
+
+# prepare2 creates a makefile if using a separate output directory
+prepare2: prepare3 outputmakefile cfg
+
+prepare1: prepare2 $(version_h) $(timestamp_h) $(dt_h) $(env_h) \
+ include/config/auto.conf
+ifeq ($(wildcard $(LDSCRIPT)),)
+ @echo >&2 " Could not find linker script."
+ @/bin/false
+endif
+
+ifeq ($(CONFIG_USE_DEFAULT_ENV_FILE),y)
+prepare1: $(defaultenv_h)
+
+envtools: $(defaultenv_h)
+endif
+
+archprepare: prepare1 scripts_basic
+
+prepare0: archprepare FORCE
+ $(Q)$(MAKE) $(build)=.
+
+# All the preparing..
+prepare: prepare0
+
+# Generate some files
+# ---------------------------------------------------------------------------
+
+# Use sed to remove leading zeros from PATCHLEVEL to avoid using octal numbers
+define filechk_version.h
+ (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
+ echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
+ echo \#define U_BOOT_VERSION_NUM $(VERSION); \
+ echo \#define U_BOOT_VERSION_NUM_PATCH $$(echo $(PATCHLEVEL) | \
+ sed -e "s/^0*//"); \
+ echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
+ echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
+endef
+
+# The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
+# The BSD date on the other hand behaves different and would produce errors
+# with the misused '-d' switch. Respect that and search a working date with
+# well known pre- and suffixes for the GNU variant of date.
+define filechk_timestamp.h
+ (if test -n "$${SOURCE_DATE_EPOCH}"; then \
+ SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
+ DATE=""; \
+ for date in gdate date.gnu date; do \
+ $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
+ done; \
+ if test -n "$${DATE}"; then \
+ LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
+ LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
+ LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
+ LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_EPOCH %s'; \
+ else \
+ return 42; \
+ fi; \
+ else \
+ LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
+ LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
+ LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
+ LC_ALL=C date +'#define U_BOOT_EPOCH %s'; \
+ fi)
+endef
+
+define filechk_defaultenv.h
+ ( { grep -v '^#' | grep -v '^$$' || true ; echo '' ; } | \
+ tr '\n' '\0' | \
+ sed -e 's/\\\x0\s*//g' | \
+ xxd -i ; )
+endef
+
+define filechk_dt.h
+ (if test -n "$${DEVICE_TREE}"; then \
+ echo \#define DEVICE_TREE \"$(DEVICE_TREE)\"; \
+ else \
+ echo \#define DEVICE_TREE CONFIG_DEFAULT_DEVICE_TREE; \
+ fi)
+endef
+
+$(version_h): include/config/uboot.release FORCE
+ $(call filechk,version.h)
+
+$(timestamp_h): $(srctree)/Makefile FORCE
+ $(call filechk,timestamp.h)
+
+$(dt_h): $(srctree)/Makefile FORCE
+ $(call filechk,dt.h)
+
+$(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
+ $(call filechk,defaultenv.h)
+
+# ---------------------------------------------------------------------------
+# Devicetree files
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
+dtstree := arch/$(SRCARCH)/boot/dts
+endif
+
+ifneq ($(dtstree),)
+
+%.dtb: prepare3 scripts_dtc
+ $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
+
+PHONY += dtbs dtbs_install
+dtbs: prepare3 scripts_dtc
+ $(Q)$(MAKE) $(build)=$(dtstree)
+
+dtbs_install:
+ $(Q)$(MAKE) $(dtbinst)=$(dtstree)
+
+endif
+
+# Check dtc and pylibfdt, if DTC is provided, else build them
+PHONY += scripts_dtc
+scripts_dtc: scripts_basic
+ $(Q)if test "$(DTC)" = "$(DTC_INTREE)"; then \
+ $(MAKE) $(build)=scripts/dtc; \
+ else \
+ if ! $(DTC) -v >/dev/null; then \
+ echo '*** Failed to check dtc version: $(DTC)'; \
+ false; \
+ else \
+ if test "$(call dtc-version)" -lt $(DTC_MIN_VERSION); then \
+ echo '*** Your dtc is too old, please upgrade to dtc $(DTC_MIN_VERSION) or newer'; \
+ false; \
+ else \
+ if [ -n "$(CONFIG_PYLIBFDT)" ]; then \
+ if ! echo "import libfdt" | $(PYTHON3) 2>/dev/null; then \
+ echo '*** pylibfdt does not seem to be available with $(PYTHON3)'; \
+ false; \
+ fi; \
+ fi; \
+ fi; \
+ fi; \
+ fi
+
+# ---------------------------------------------------------------------------
+quiet_cmd_cpp_lds = LDS $@
+cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
+ -D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
+
+u-boot.lds: $(LDSCRIPT) prepare FORCE
+ $(call if_changed_dep,cpp_lds)
+
+spl/u-boot-spl.bin: spl/u-boot-spl
+ @:
+ $(SPL_SIZE_CHECK)
+
+spl/u-boot-spl-dtb.bin: spl/u-boot-spl
+ @:
+
+spl/u-boot-spl-dtb.hex: spl/u-boot-spl
+ @:
+
+spl/u-boot-spl: tools prepare $(if $(CONFIG_SPL_OF_CONTROL),dts/dt.dtb)
+ $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
+
+spl/sunxi-spl.bin: spl/u-boot-spl
+ @:
+
+spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
+ @:
+
+spl/u-boot-spl.sfp: spl/u-boot-spl
+ @:
+
+spl/boot.bin: spl/u-boot-spl
+ @:
+
+tpl/u-boot-tpl.bin: tpl/u-boot-tpl
+ @:
+ $(TPL_SIZE_CHECK)
+
+tpl/u-boot-tpl: tools prepare $(if $(CONFIG_TPL_OF_CONTROL),dts/dt.dtb)
+ $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
+
+vpl/u-boot-vpl.bin: vpl/u-boot-vpl
+ @:
+ $(VPL_SIZE_CHECK)
+
+vpl/u-boot-vpl: tools prepare $(if $(CONFIG_TPL_OF_CONTROL),dts/dt.dtb)
+ $(Q)$(MAKE) obj=vpl -f $(srctree)/scripts/Makefile.spl all
+
+TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
+
+FIND := find
+FINDFLAGS := -L
+
+tags ctags:
+ ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
+ -name '*.[chS]' -print`
+ ln -s ctags tags
+
+etags:
+ etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
+ -name '*.[chS]' -print`
+cscope:
+ $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
+ cscope.files
+ @find $(TAG_SUBDIRS) -name '*.[chS]' -type l -print | \
+ grep -xvf - cscope.files > cscope.files.no-symlinks; \
+ mv cscope.files.no-symlinks cscope.files
+ cscope -b -q -k
+
+SYSTEM_MAP = \
+ $(NM) $1 | \
+ grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
+ LC_ALL=C sort
+System.map: u-boot
+ @$(call SYSTEM_MAP,$<) > $@
+
+#########################################################################
+
+# ARM relocations should all be R_ARM_RELATIVE (32-bit) or
+# R_AARCH64_RELATIVE (64-bit).
+checkarmreloc: u-boot
+ @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
+ grep R_A | sort -u`"; \
+ if test "$$RELOC" != "R_ARM_RELATIVE" -a \
+ "$$RELOC" != "R_AARCH64_RELATIVE"; then \
+ echo "$< contains unexpected relocations: $$RELOC"; \
+ false; \
+ fi
+
+tools/version.h: include/version.h
+ $(Q)mkdir -p $(dir $@)
+ $(call if_changed,copy)
+
+envtools: u-boot-initial-env scripts_basic $(version_h) $(timestamp_h) tools/version.h
+ $(Q)$(MAKE) $(build)=tools/env
+
+tools-only: export TOOLS_ONLY=y
+tools-only: scripts_basic $(version_h) $(timestamp_h) tools/version.h
+ $(Q)$(MAKE) $(build)=tools
+
+tools-all: export HOST_TOOLS_ALL=y
+tools-all: envtools tools ;
+
+cross_tools: export CROSS_BUILD_TOOLS=y
+cross_tools: tools ;
+
+.PHONY : CHANGELOG
+CHANGELOG:
+ git log --no-merges U-Boot-1_1_5.. | \
+ unexpand -a | sed -e 's/\s\s*$$//' > $@
+
+#########################################################################
+
+###
+# Cleaning is done on three levels.
+# make clean Delete most generated files
+# Leave enough to build external modules
+# make mrproper Delete the current configuration, and all generated files
+# make distclean Remove editor backup files, patch leftover files and the like
+
+# Directories & files removed with 'make clean'
+CLEAN_DIRS += $(MODVERDIR) \
+ $(foreach d, spl tpl, $(patsubst %,$d/%, \
+ $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
+
+CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
+ include/generated/env.* drivers/video/u_boot_logo.S \
+ tools/version.h u-boot* MLO* SPL System.map fit-dtb.blob* \
+ u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log \
+ lpc32xx-* bl31.c bl31.elf bl31_*.bin image.map tispl.bin* \
+ idbloader.img flash.bin flash.log defconfig keep-syms-lto.c \
+ mkimage-out.spl.mkimage mkimage.spl.mkimage imx-boot.map \
+ itb.fit.fit itb.fit.itb itb.map spl.map mkimage-out.rom.mkimage \
+ mkimage.rom.mkimage rom.map simple-bin.map simple-bin-spi.map \
+ idbloader-spi.img lib/efi_loader/helloworld_efi.S
+
+# Directories & files removed with 'make mrproper'
+MRPROPER_DIRS += include/config include/generated spl tpl \
+ .tmp_objdiff doc/output include/asm
+
+# Remove include/asm symlink created by U-Boot before v2014.01
+MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
+ ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
+ drivers/video/fonts/*.S include/asm
+
+# clean - Delete most, but leave enough to build external modules
+#
+clean: rm-dirs := $(CLEAN_DIRS)
+clean: rm-files := $(CLEAN_FILES)
+
+clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
+
+clean-dirs := $(addprefix _clean_, $(clean-dirs))
+
+PHONY += $(clean-dirs) clean archclean
+$(clean-dirs):
+ $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
+
+clean: $(clean-dirs)
+ $(call cmd,rmdirs)
+ $(call cmd,rmfiles)
+ @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
+ \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+ -o -name '*.ko.*' -o -name '*.su' -o -name '*.pyc' \
+ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
+ -o -name '*.lex.c' -o -name '*.tab.[ch]' \
+ -o -name '*.asn1.[ch]' \
+ -o -name '*.symtypes' -o -name 'modules.order' \
+ -o -name modules.builtin -o -name '.tmp_*.o.*' \
+ -o -name 'dsdt_generated.aml' -o -name 'dsdt_generated.asl.tmp' \
+ -o -name 'dsdt_generated.c' \
+ -o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
+ -type f -print | xargs rm -f
+
+# mrproper - Delete all generated files, including .config
+#
+mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
+mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
+mrproper-dirs := $(addprefix _mrproper_,scripts)
+
+PHONY += $(mrproper-dirs) mrproper archmrproper
+$(mrproper-dirs):
+ $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
+
+mrproper: clean $(mrproper-dirs)
+ $(call cmd,rmdirs)
+ $(call cmd,rmfiles)
+ @rm -f arch/*/include/asm/arch
+
+# distclean
+#
+PHONY += distclean
+
+distclean: mrproper
+ @find $(srctree) $(RCS_FIND_IGNORE) \
+ \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
+ -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
+ -o -name '.*.rej' -o -name '*%' -o -name 'core' \
+ -o -name '*.pyc' \) \
+ -type f -print | xargs rm -f
+ @rm -f boards.cfg CHANGELOG
+
+# See doc/develop/python_cq.rst
+PHONY += pylint pylint_err
+PYLINT_BASE := scripts/pylint.base
+PYLINT_CUR := pylint.cur
+PYLINT_DIFF := pylint.diff
+pylint:
+ $(Q)echo "Running pylint on all files (summary in $(PYLINT_CUR); output in pylint.out/)"
+ $(Q)mkdir -p pylint.out
+ $(Q)rm -f pylint.out/out*
+ $(Q)find tools test -name "*.py" \
+ | xargs -n1 -P$(shell nproc 2>/dev/null || echo 1) \
+ sh -c 'pylint --reports=y --exit-zero -f parseable --ignore-imports=yes $$@ > pylint.out/$$(echo $$@ | tr / _ | sed s/.py//)' _
+ $(Q)rm -f $(PYLINT_CUR)
+ $(Q)( cd pylint.out; for f in *; do \
+ sed -ne "s/Your code has been rated at \([-0-9.]*\).*/$$f \1/p" $$f; \
+ done ) | sort > $(PYLINT_CUR)
+ $(Q)base=$$(mktemp) cur=$$(mktemp); cut -d' ' -f1 $(PYLINT_BASE) >$$base; \
+ cut -d' ' -f1 $(PYLINT_CUR) >$$cur; \
+ comm -3 $$base $$cur > $(PYLINT_DIFF); \
+ if [ -s $(PYLINT_DIFF) ]; then \
+ echo "Files have been added/removed. Try:\n\tcp $(PYLINT_CUR) $(PYLINT_BASE)"; \
+ echo; \
+ echo "Added files:"; \
+ comm -13 $$base $$cur; \
+ echo; \
+ echo "Removed files:"; \
+ comm -23 $$base $$cur; \
+ false; \
+ else \
+ rm $$base $$cur $(PYLINT_DIFF); \
+ fi
+ $(Q)bad=false; while read base_file base_val <&3 && read cur_file cur_val <&4; do \
+ if awk "BEGIN {exit !($$cur_val < $$base_val)}"; then \
+ echo "$$base_file: Score was $$base_val, now $$cur_val"; \
+ bad=true; fi; \
+ done 3<$(PYLINT_BASE) 4<$(PYLINT_CUR); \
+ if $$bad; then \
+ echo "Some files have regressed, please fix"; \
+ false; \
+ else \
+ echo "No pylint regressions"; \
+ fi
+
+# Check for errors only
+pylint_err:
+ $(Q)pylint -E -j 0 --ignore-imports=yes \
+ $(shell find tools test -name "*.py")
+
+backup:
+ F=`basename $(srctree)` ; cd .. ; \
+ gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
+
+PHONY += _pip pip pip_release
+
+pip_release: PIP_ARGS="--real"
+pip_test: PIP_ARGS=""
+pip: PIP_ARGS="-n"
+
+pip pip_test pip_release: _pip
+
+_pip:
+ scripts/make_pip.sh u_boot_pylib ${PIP_ARGS}
+ scripts/make_pip.sh patman ${PIP_ARGS}
+ scripts/make_pip.sh buildman ${PIP_ARGS}
+ scripts/make_pip.sh dtoc ${PIP_ARGS}
+ scripts/make_pip.sh binman ${PIP_ARGS}
+
+help:
+ @echo 'Cleaning targets:'
+ @echo ' clean - Remove most generated files but keep the config'
+ @echo ' mrproper - Remove all generated files + config + various backup files'
+ @echo ' distclean - mrproper + remove editor backup and patch files'
+ @echo ''
+ @echo 'Configuration targets:'
+ @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
+ @echo ''
+ @echo 'Test targets:'
+ @echo ''
+ @echo ' check - Run all automated tests that use sandbox'
+ @echo ' pcheck - Run quick automated tests in parallel'
+ @echo ' qcheck - Run quick automated tests that use sandbox'
+ @echo ' tcheck - Run quick automated tests on tools'
+ @echo ' pylint - Run pylint on all Python files'
+ @echo ''
+ @echo 'Other generic targets:'
+ @echo ' all - Build all necessary images depending on configuration'
+ @echo ' tests - Build U-Boot for sandbox and run tests'
+ @echo '* u-boot - Build the bare u-boot'
+ @echo ' dir/ - Build all files in dir and below'
+ @echo ' dir/file.[oisS] - Build specified target only'
+ @echo ' dir/file.lst - Build specified mixed source/assembly target only'
+ @echo ' (requires a recent binutils and recent build (System.map))'
+ @echo ' tags/ctags - Generate ctags file for editors'
+ @echo ' etags - Generate etags file for editors'
+ @echo ' cscope - Generate cscope index'
+ @echo ' ubootrelease - Output the release version string (use with make -s)'
+ @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
+ @echo " cfg - Don't build, just create the .cfg files"
+ @echo " envtools - Build only the target-side environment tools"
+ @echo ''
+ @echo 'PyPi / pip targets:'
+ @echo ' pip - Check building of PyPi packages'
+ @echo ' pip_test - Build PyPi pakages and upload to test server'
+ @echo ' pip_release - Build PyPi pakages and upload to release server'
+ @echo ''
+ @echo 'Static analysers'
+ @echo ' checkstack - Generate a list of stack hogs'
+ @echo ' coccicheck - Execute static code analysis with Coccinelle'
+ @echo ''
+ @echo 'Documentation targets:'
+ @$(MAKE) -f $(srctree)/doc/Makefile dochelp
+ @echo ''
+ @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
+ @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
+ @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
+ @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
+ @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
+ @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
+ @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
+ @echo ' 1: warnings which may be relevant and do not occur too often'
+ @echo ' 2: warnings which occur quite often but may still be relevant'
+ @echo ' 3: more obscure warnings, can most likely be ignored'
+ @echo ' Multiple levels can be combined with W=12 or W=123'
+ @echo ''
+ @echo 'Execute "make" or "make all" to build all targets marked with [*] '
+ @echo 'For further info see the ./README file'
+
+tests check:
+ $(srctree)/test/run
+
+pcheck:
+ $(srctree)/test/run parallel
+
+qcheck:
+ $(srctree)/test/run quick
+
+tcheck:
+ $(srctree)/test/run tools
+
+# Documentation targets
+# ---------------------------------------------------------------------------
+DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
+ linkcheckdocs dochelp refcheckdocs texinfodocs infodocs
+PHONY += $(DOC_TARGETS)
+$(DOC_TARGETS): scripts_basic FORCE
+ $(Q)$(MAKE) $(build)=doc $@
+
+PHONY += checkstack ubootrelease ubootversion
+
+checkstack:
+ $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
+ $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
+
+ubootrelease:
+ @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
+
+ubootversion:
+ @echo $(UBOOTVERSION)
+
+# Single targets
+# ---------------------------------------------------------------------------
+# Single targets are compatible with:
+# - build with mixed source and output
+# - build with separate output dir 'make O=...'
+# - external modules
+#
+# target-dir => where to store outputfile
+# build-dir => directory in kernel source tree to use
+
+ifeq ($(KBUILD_EXTMOD),)
+ build-dir = $(patsubst %/,%,$(dir $@))
+ target-dir = $(dir $@)
+else
+ zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
+ build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
+ target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
+endif
+
+%.s: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.i: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.lst: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.s: %.S prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.S prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.symtypes: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+
+# Modules
+/: prepare scripts FORCE
+ $(cmd_crmodverdir)
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir)
+%/: prepare scripts FORCE
+ $(cmd_crmodverdir)
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir)
+%.ko: prepare scripts FORCE
+ $(cmd_crmodverdir)
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir) $(@:.ko=.o)
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
+quiet_cmd_genenv = GENENV $@
+cmd_genenv = \
+ $(objtree)/tools/printinitialenv | \
+ sed -e '/^\s*$$/d' | \
+ sort --field-separator== -k1,1 --stable -o $@
+
+u-boot-initial-env: $(env_h) FORCE
+ $(Q)$(MAKE) $(build)=tools $(objtree)/tools/printinitialenv
+ $(call if_changed,genenv)
+
+# Consistency checks
+# ---------------------------------------------------------------------------
+
+PHONY += coccicheck
+
+coccicheck:
+ $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
+
+# FIXME Should go into a make.lib or something
+# ===========================================================================
+
+quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
+ cmd_rmdirs = rm -rf $(rm-dirs)
+
+quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
+ cmd_rmfiles = rm -f $(rm-files)
+
+# read all saved command lines
+
+cmd_files := $(wildcard .*.cmd)
+
+ifneq ($(cmd_files),)
+ $(cmd_files): ; # Do not try to update included dependency files
+ include $(cmd_files)
+endif
+
+endif #ifeq ($(config-targets),1)
+endif #ifeq ($(mixed-targets),1)
+endif # skip-makefile
+
+PHONY += FORCE
+FORCE:
+
+# Declare the contents of the PHONY variable as phony. We keep that
+# information in a variable so we can use it in if_changed and friends.
+.PHONY: $(PHONY)
Index: denx/patches/README
===================================================================
--- denx/patches/README (nonexistent)
+++ denx/patches/README (revision 385)
@@ -0,0 +1,6 @@
+
+/* begin *
+
+ TODO: Leave some comment here.
+
+ * end */
Index: denx/patches
===================================================================
--- denx/patches (nonexistent)
+++ denx/patches (revision 385)
Property changes on: denx/patches
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: rkbin/Makefile
===================================================================
--- rkbin/Makefile (nonexistent)
+++ rkbin/Makefile (revision 385)
@@ -0,0 +1,45 @@
+
+COMPONENT_TARGETS = $(HARDWARE_NOARCH)
+
+
+include ../../../build-system/constants.mk
+
+
+url = $(DOWNLOAD_SERVER)/sources/U-Boot/rkbin
+
+versions = 20230519
+
+tarballs = $(addsuffix .tar.xz, $(addprefix rkbin-, $(versions)))
+sha1s = $(addsuffix .sha1sum, $(tarballs))
+
+
+BUILD_TARGETS = $(tarballs) $(sha1s)
+
+
+include ../../../build-system/core.mk
+
+
+.PHONY: download_clean
+
+
+$(tarballs):
+ @echo -e "\n======= Downloading source tarballs =======" ; \
+ for tarball in $(tarballs) ; do \
+ echo "$(url)/$$tarball" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & \
+ done ; wait
+
+$(sha1s): $(tarballs)
+ @for sha in $@ ; do \
+ echo -e "\n======= Downloading '$$sha' signature =======\n" ; \
+ echo "$(url)/$$sha" | xargs -n 1 -P 100 wget $(WGET_OPTIONS) - & wait %1 ; \
+ touch $$sha ; \
+ echo -e "\n======= Check the '$$sha' sha1sum =======\n" ; \
+ sha1sum --check $$sha ; ret="$$?" ; \
+ if [ "$$ret" == "1" ]; then \
+ echo -e "\n======= ERROR: Bad '$$sha' sha1sum =======\n" ; \
+ exit 1 ; \
+ fi ; \
+ done
+
+download_clean:
+ @rm -f $(tarballs) $(sha1s)
Index: rkbin
===================================================================
--- rkbin (nonexistent)
+++ rkbin (revision 385)
Property changes on: rkbin
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Radix cross Linux
The main Radix cross Linux repository contains the build scripts of packages, which have the most complete and common functionality for desktop machines
452 Commits
2 Branches
1 Tag