Index: setup
===================================================================
--- setup (nonexistent)
+++ setup (revision 5)
@@ -0,0 +1,2687 @@
+#!/bin/bash
+
+program=`basename $0`
+sbindir=`cd $(dirname ${BASH_SOURCE[0]}) >/dev/null 2>&1 && pwd`
+
+# 13 = permission denied (should be root)
+# 14 = there is no '.pkglist' file
+# 15 = invalid target device
+# 16 = target device has not specified arter --root-dev option
+# 17 = source REPO directory is invalid
+# 18 = custom REPO directory has not specified by --repo option
+# 19 = target device too small
+# 20 = /sbin/fdisk returns bad status
+# 21 = cannot mount ROOT partition
+# 22 = cannot mount EFI partition
+# 92 = Cannot create '/tmp/...' directory
+# 93 = Unexpected program abort
+EXITSTATUS=0
+
+WHERE=${sbindir}/where-we-are
+
+#
+# Getting information about DISTRO:
+#
+push_err() {
+ message=$1
+ echo -n "$program: " >&2 ; echo "${message}" >&2
+}
+
+if [ ! -r /etc/os-release ] ; then
+ push_err "ERROR: /etc/os-release: There are no operating system information"
+ exit 1
+fi
+
+. /etc/os-release
+
+if [ ! -r /etc/${ID}-release ] ; then
+ push_err "ERROR: /etc/${ID}-release: There are no ${ID} distribution information"
+ exit 1
+fi
+
+. /etc/${ID}-release
+
+LOG_FILE=${LOG_FILE:-/var/log/${DISTRO_NAME}-${program}.log}
+
+DIALOG=${DIALOG:-/bin/dialog}
+
+push_log() {
+ message=$1
+ echo -n "[`LANG=en LANGUAGE=en date +'%d-%b-%Y %H:%M:%S'`] $program: " >> ${LOG_FILE}
+ echo "${message}" >> ${LOG_FILE}
+}
+
+umask 022
+TMP=$(mkdir -p /tmp/${DISTRO_NAME} && mktemp -d -p /tmp/${DISTRO_NAME} $program.XXXXXXXX) || { echo "Cannot create '/tmp/...' directory" ; exit 92; }
+mkdir -p /tmp/${DISTRO_NAME}/mnt
+MNT=/tmp/${DISTRO_NAME}/mnt
+#
+# Clear screen on unexpected termination:
+#
+trap 'clear ; \
+ head -c 100 /dev/zero | tr "\0" "\n" ; \
+ echo "ERROR: $program - has been terminated." ; \
+ echo "" ; \
+ EXITSTATUS=93 ; \
+ ' INT TERM HUP QUIT
+#
+# This program cam mount filesystems to first level
+# directories relative to $MNT or directly to $MNT:
+#
+trap 'for dir in `find ${MNT} -type d -mindepth 1 -maxdepth 1` ; do \
+ umount $dir 2> /dev/null ; \
+ done ; \
+ umount ${MNT} 2> /dev/null ; \
+ rm -rf /tmp/${DISTRO_NAME} ; \
+ rm -f /etc/system-installer ; \
+ exit ${EXITSTATUS} ;\
+ ' EXIT
+
+
+check_current_user()
+{
+ echo "Radix System Setup" > /etc/system-installer
+
+ if [ "$EUID" != "0" ] ; then
+ $DIALOG --colors --clear \
+ --backtitle "\Z7${DISTRO_CAPTION}\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0Setup:\Zn \Z1\ZbERROR\ZB\Zn " \
+ --msgbox "\n\Z4${program}\Zn - \Z1program should be run by root.\Zn\n" 7 74
+
+ push_log "ERROR: Program should be run by root"
+ push_log "Aborted due to an error"
+ push_err "ERROR: Program should be run by root"
+ EXITSTATUS=13
+ exit
+ fi
+}
+
+ask_exit_setup() {
+ cat > $TMP/exit-setup-help$$ << EOF
+
+ Do you want to terminate Radix System Installation?
+
+EOF
+
+ $DIALOG --colors --defaultno --clear \
+ --backtitle "\Z7${DISTRO_CAPTION}\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0Setup:\Zn \Z4\ZbExit\ZB\Zn " \
+ --no-label "No" \
+ --yes-label "Ok" \
+ --yesno "$(cat $TMP/exit-setup-help$$)" 7 74
+ ret=$?
+ rm -f $TMP/exit-setup-help$$
+ if [ $ret -eq 0 ] ; then
+ push_log "Done"
+ exit
+ fi
+}
+
+fatal_error_dialog()
+{
+ local msg="${1}"
+ cat > $TMP/fatal-message$$ << EOF
+
+ ${msg}
+
+EOF
+
+ $DIALOG --colors --clear \
+ --backtitle "\Z7${DISTRO_CAPTION}\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0Setup:\Zn \Z1\ZbERROR\ZB\Zn " \
+ --msgbox "$(cat $TMP/fatal-message$$)" 7 74
+}
+
+error_dialog()
+{
+ local msg="${1}"
+ cat > $TMP/error-message$$ << EOF
+
+ ${msg}
+
+EOF
+
+ $DIALOG --colors --clear \
+ --backtitle "\Z7${DISTRO_CAPTION}\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0Setup:\Zn \Z1\ZbERROR\ZB\Zn " \
+ --no-label " Exit Setup " \
+ --yes-label " Continue " \
+ --yesno "$(cat $TMP/error-message$$)" 7 74
+ ret=$?
+ rm -f $TMP/error-message$$
+ if [ $ret -ne 0 ] ; then
+ exit
+ fi
+}
+
+welcome_setup()
+{
+ cat > $TMP/welcome-setup-rc$$ << EOF
+use_colors = ON
+shadow_color = (BLACK,BLACK,OFF)
+screen_color = (WHITE,BLACK,ON)
+use_shadow = OFF
+dialog_color = (WHITE,BLACK,OFF)
+title_color = (WHITE,BLACK,ON)
+border_color = (BLACK,BLACK,OFF)
+border2_color = (BLACK,BLACK,OFF)
+button_active_color = (WHITE,BLACK,ON)
+button_inactive_color = (WHITE,BLACK,OFF)
+button_key_active_color = (RED,BLACK,ON)
+button_key_inactive_color = (WHITE,BLACK,ON)
+button_label_active_color = (WHITE,BLACK,ON)
+button_label_inactive_color = (WHITE,BLACK,ON)
+EOF
+
+ cat > $TMP/welcome-setup-help$$ << EOF
+
+Version \Zb${DISTRO_FULL_VERSION}\Zn
+Copyright (c) 2009-`date +%Y`, Andrey V.Kosteltsev. All rights reserved.
+${DISTRO_HOME_URL}
+
+Built for ${HARDWARE_SPEC} [\Zb${HARDWARE}\Zn]
+Toolchain ${TOOLCHAIN_VERSION} [\Zb${TOOLCHAIN_NAME}\Zn]
+
+Now you can install \Zb${DISTRO_CAPTION}-${DISTRO_VERSION}\Zn to you hard drive or internal flash.
+
+Enjoy!
+
+EOF
+
+ DIALOGRC=$TMP/welcome-setup-rc$$ \
+ $DIALOG --colors --clear \
+ --backtitle "\Z7${DISTRO_CAPTION}\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " Setup ${DISTRO_CAPTION} \Z1cross\Zn Linux " \
+ --no-label " Exit Setup " \
+ --yes-label " Continue " \
+ --yesno "$(cat $TMP/welcome-setup-help$$)" 16 74
+ ret=$?
+ rm -f $TMP/welcome-setup-help$$
+ if [ $ret -ne 0 ] ; then
+ exit
+ fi
+}
+
+usage() {
+ cat << EOF
+
+Usage: $program [options]
+
+$program - is used to install ${DISTRO_SPEC} from the 'repo' directory.
+
+ The 'repo' directory sould contains ${DISTRO_CAPTION} packages set with '.pkglist'
+ file at least for one HARDWARE. The ordinary structure of the 'repo'
+ directories should seems like following:
+
+ /var/lib/${DISTRO_NAME}/repo
+ ├── ${DISTRO_FULL_VERSION}
+ ├── TOOLCHAIN
+ ... └── HARDWARE
+ ├── ...
+ │ ...
+ └── ${TOOLCHAIN_NAME}
+ └── ${HARDWARE}
+ ├── app
+ │ ├── bash-5.2.9-`echo ${TOOLCHAIN_NAME} | cut -f1 -d'-'`-radix-${DISTRO_VERSION}.tgz
+ │ ├── ...
+ │ ...
+ ├── base
+ │ ├── ...
+ │ ...
+ ...
+
+ └── .pkglist
+
+ where, /var/lib/${DISTRO_NAME}/repo/${DISTRO_FULL_VERSION}/${TOOLCHAIN_NAME}/${HARDWARE} - applicable
+ directory for current release.
+
+options:
+ -h | --help - Display this information;
+ -r | --root-dev <DEVICE> - Target device to install [/dev/sda,
+ /dev/mmcblk0, /dev/loop0, etc.];
+ --repo <DIR> - Absolute path to the REPO source directory
+ (Default: /var/lib/${DISTRO_NAME}/repo/${DISTRO_FULL_VERSION}/${TOOLCHAIN_NAME}/${HARDWARE}).
+ The user defined absolute path to the REPO directory must match
+ the standard pattern: '/custom-dir/VERSION/TOOLCHAIN/HARDWARE';
+
+ The /etc/${DISTRO_NAME}-rlease file contains detailed info about
+ setup parameters.
+
+EOF
+}
+
+#
+# Start installation:
+#
+push_log "Start of ${DISTRO_CAPTION}-${DISTRO_VERSION} installation"
+
+# Only root can execute:
+check_current_user
+
+device=
+version=${DISTRO_FULL_VERSION}
+toolchain=${TOOLCHAIN_NAME}
+hardware=${HARDWARE}
+repo=/var/lib/${DISTRO_NAME}/repo/${DISTRO_FULL_VERSION}/${TOOLCHAIN_NAME}/${HARDWARE}
+
+custom_repo=no
+
+current_device=
+current_root=
+rootfs_min_bytes=
+
+partition_table_type=o
+
+uefi_part_number=1
+root_part_number=1
+home_part_number=2
+swap_part_number=3
+
+uefi_bytes=
+if [ "${hardware}" = "baikal-m1" -o \
+ "${hardware}" = "intel-pc64" ] ; then
+ partition_table_type=g
+ uefi_bytes=268435456
+fi
+
+if [ "x${uefi_bytes}" != "x" ] ; then
+ root_part_number=2
+ home_part_number=3
+ swap_part_number=4
+fi
+
+uefi_start_sector=
+uefi_end_sector=
+root_bytes=
+root_start_sector=
+root_end_sector=
+home_bytes=
+home_start_sector=
+home_end_sector=
+swap_bytes=
+swap_start_sector=
+swap_end_sector=
+
+p=
+
+
+################################################################
+#
+# Disk Geometry functions:
+#
+
+# Disk /dev/vda: 20 GiB, 21474836480 bytes, 41943040 sectors
+# Sector size (logical/physical): 512 bytes / 512 bytes
+
+bytes=
+sectors=
+unit_size=
+log_sector_size=
+phy_sector_size=
+alignment=4096
+format="512N"
+start_sector=
+ram_bytes=
+#
+# Format | logical sector size | physical sector size
+# --------+---------------------+----------------------
+# 512N | 512 | 512
+# --------+---------------------+----------------------
+# 512E | 512 | 4096
+# --------+---------------------+----------------------
+# 4096N | 4096 | 4096
+# --------+---------------------+----------------------
+#
+
+disk_size_in_bytes() {
+ disk=${1}
+ echo "`LANG=en_US.UTF-8 fdisk -l ${disk}`" | while read -r line ; do
+ local found=`echo "${line}" | grep "^Disk ${disk}"`
+ if [ "x${found}" != "x" ] ; then
+ local bytes=`echo ${found} | sed 's,.* \([0-9]*\) bytes.*,\1,'`
+ echo "${bytes}"
+ break
+ fi
+ done
+}
+
+disk_size_in_sectors() {
+ disk=${1}
+ echo "`LANG=en_US.UTF-8 fdisk -l ${disk}`" | while read -r line ; do
+ local found=`echo "${line}" | grep "^Disk ${disk}"`
+ if [ "x${found}" != "x" ] ; then
+ local sectors=`echo ${found} | sed 's,.* \([0-9]*\) sectors$,\1,'`
+ echo "${sectors}"
+ break
+ fi
+ done
+}
+
+disk_unit_size() {
+ disk=${1}
+ echo "`LANG=en_US.UTF-8 fdisk -l ${disk}`" | while read -r line ; do
+ local found=`echo "${line}" | grep "^Unit"`
+ if [ "x${found}" != "x" ] ; then
+ local usize=`echo ${found} | sed 's,.*= \([0-9]*\) bytes$,\1,'`
+ echo "${usize}"
+ break
+ fi
+ done
+}
+
+disk_log_sector_size() {
+ disk=${1}
+ echo "`LANG=en_US.UTF-8 fdisk -l ${disk}`" | while read -r line ; do
+ local found=`echo "${line}" | grep '^Sector size'`
+ if [ "x${found}" != "x" ] ; then
+ local lsize=`echo ${found} | sed 's,.* \([0-9]*\) bytes / \([0-9]*\) bytes$,\1,'`
+ echo "${lsize}"
+ break
+ fi
+ done
+}
+
+disk_phy_sector_size() {
+ disk=${1}
+ echo "`LANG=en_US.UTF-8 fdisk -l ${disk}`" | while read -r line ; do
+ local found=`echo "${line}" | grep '^Sector size'`
+ if [ "x${found}" != "x" ] ; then
+ local psize=`echo ${found} | sed 's,.* \([0-9]*\) bytes / \([0-9]*\) bytes$,\2,'`
+ echo "${psize}"
+ break
+ fi
+ done
+}
+
+memory_size() {
+ echo "`LANG=en_US.UTF-8 free -b -w`" | while read -r line ; do
+ local found=`echo "${line}" | grep '^Mem'`
+ if [ "x${found}" != "x" ] ; then
+ local msize=`echo ${found} | tr -s ' ' | cut -f2 -d' '`
+ echo "${msize}"
+ break
+ fi
+ done
+}
+
+disk_geometry() {
+ disk=${1}
+
+ bytes=`disk_size_in_bytes ${disk}`
+ sectors=`disk_size_in_sectors ${disk}`
+ unit_size=`disk_unit_size ${disk}`
+ log_sector_size=`disk_log_sector_size ${disk}`
+ phy_sector_size=`disk_phy_sector_size ${disk}`
+
+ ram_bytes=`memory_size`
+
+ if [ $unit_size -eq $alignment ] ; then
+ # Copy of GPT at end of disk:
+ let "sectors = sectors - 5"
+ else
+ # Copy of GPT at end of disk:
+ let "sectors = sectors - 33"
+ fi
+
+ if [ $phy_sector_size -eq $alignment ] ; then
+ if [ $log_sector_size -lt $phy_sector_size ] ; then
+ format="512E"
+ start_sector=2048
+ else
+ format="4096N"
+ start_sector=256
+ fi
+ else
+ format="512N"
+ start_sector=2048
+ fi
+}
+#
+# End of Disk Geometry functions.
+#
+################################################################
+
+################################################################
+#
+# Disk Format functions:
+#
+clean_disk()
+{
+ local disk=${1}
+ fdisk --wipe=always --wipe-partition=always ${disk} 1>/dev/null 2>/dev/null <<EOF
+${partition_table_type}
+w
+EOF
+}
+
+create_EFI_partition()
+{
+ local disk=${1}
+
+ local name="EFI System"
+ local guid="c12a7328-f81f-11d2-ba4b-00a0c93ec93b"
+ local type="ef"
+
+ uefi_start_sector=${start_sector}
+
+ let 'uefi_bytes = uefi_bytes / alignment * alignment'
+
+ let 'uefi_end_sector = uefi_start_sector + ( uefi_bytes / unit_size - 1 )'
+ let 'root_start_sector = uefi_end_sector + 1'
+
+ if [ "${partition_table_type}" = "g" ] ; then
+ fdisk --wipe=always --wipe-partition=always ${disk} 1>/dev/null 2>/dev/null <<EOF
+n
+$uefi_part_number
+$uefi_start_sector
+$uefi_end_sector
+t
+$guid
+x
+n
+$name
+r
+w
+EOF
+ else
+ fdisk --wipe=always --wipe-partition=always ${disk} 1>/dev/null 2>/dev/null <<EOF
+n
+p
+$uefi_part_number
+$uefi_start_sector
+$uefi_end_sector
+t
+$type
+w
+EOF
+ fi
+
+ mkfs.fat -F 32 -n UEFI ${disk}${p}1 2>/dev/null 1>/dev/null
+}
+
+create_ROOT_partition()
+{
+ local disk=${1}
+
+ local name="Linux filesystem"
+ local guid="0fc63daf-8483-4772-8e79-3d69d8477de4"
+ local type="83"
+
+ local half=
+ local third=
+ local GiB=1073741824
+ local MiB=1048576
+
+ if [ "${bytes}" -gt "${GiB}" ] ; then
+ half=`echo "scale=0; ( $bytes / $GiB / 2 - 1 ) * $GiB" | bc`
+ third=`echo "scale=0; ( $bytes / $GiB / 3 + 1 ) * $GiB" | bc`
+ else
+ half=`echo "scale=0; ( $bytes / $MiB / 2 - 1 ) * $MiB" | bc`
+ third=`echo "scale=0; ( $bytes / $MiB / 3 + 1 ) * $MiB" | bc`
+ fi
+
+ let 'half = half / alignment * alignment'
+ let 'third = third / alignment * alignment'
+
+ if [ "x${uefi_bytes}" = "x" ] ; then
+ root_start_sector=${start_sector}
+ if [ "${hardware}" = "leez-p710" ] ; then
+ root_start_sector=32768
+ fi
+ fi
+
+ if [ "${third}" -gt "${rootfs_min_bytes}" ] ; then
+ let 'root_end_sector = root_start_sector + ( third / unit_size - 1 )'
+ let 'home_start_sector = root_end_sector + 1'
+ elif [ "${half}" -gt "${rootfs_min_bytes}" ] ; then
+ let 'root_end_sector = root_start_sector + ( half / unit_size - 1 )'
+ let 'home_start_sector = root_end_sector + 1'
+ elif [ "${bytes}" -gt "${rootfs_min_bytes}" ] ; then
+ let 'root_end_sector = root_start_sector + ( rootfs_min_bytes / unit_size - 1 )'
+ let 'home_start_sector = root_end_sector + 1'
+ else
+ fatal_error_dialog "Target device too small. Exit ${program}."
+ push_log "ERROR: Target device too small"
+ push_log "Aborted due to an error"
+ push_err "ERROR: Target device too small"
+ EXITSTATUS=19
+ exit
+ fi
+
+ let 'root_bytes = ( root_end_sector - root_start_sector + 1 ) * log_sector_size'
+
+ if [ "${root_part_number}" -eq "1" ] ; then
+ if [ "${partition_table_type}" = "g" ] ; then
+ fdisk --wipe=always --wipe-partition=always ${disk} 1>/dev/null 2>/dev/null <<EOF
+n
+$root_part_number
+$root_start_sector
+$root_end_sector
+t
+$guid
+x
+n
+$name
+r
+w
+EOF
+ else
+ fdisk --wipe=always --wipe-partition=always ${disk} 1>/dev/null 2>/dev/null <<EOF
+n
+p
+$root_part_number
+$root_start_sector
+$root_end_sector
+t
+$type
+w
+EOF
+ fi
+ else
+ if [ "${partition_table_type}" = "g" ] ; then
+ fdisk --wipe=always --wipe-partition=always ${disk} 1>/dev/null 2>/dev/null <<EOF
+n
+$root_part_number
+$root_start_sector
+$root_end_sector
+t
+$root_part_number
+$guid
+x
+n
+$root_part_number
+$name
+r
+w
+EOF
+ else
+ fdisk --wipe=always --wipe-partition=always ${disk} 1>/dev/null 2>/dev/null <<EOF
+n
+p
+$root_part_number
+$root_start_sector
+$root_end_sector
+t
+$root_part_number
+$type
+w
+EOF
+ fi
+ fi
+}
+
+create_HOME_partition()
+{
+ local disk=${1}
+
+ local name="Linux filesystem"
+ local guid="0fc63daf-8483-4772-8e79-3d69d8477de4"
+ local type="83"
+
+ local left=
+ local octa=
+ local swap=
+ local GiB=1073741824
+ local MiB=1048576
+
+ let 'left = ( sectors - root_end_sector ) * unit_size'
+
+ if [ "x${home_start_sector}" != "x" -a "${left}" -gt "$GiB" ] ; then
+
+ let 'swap = ram_bytes * 2 / alignment * alignment'
+
+ if [ "${bytes}" -gt "${GiB}" ] ; then
+ octa=`echo "scale=0; $bytes / $GiB / 8 * $GiB" | bc`
+ else
+ octa=`echo "scale=0; $bytes / $MiB / 8 * $MiB" | bc`
+ fi
+
+ let 'octa = octa / alignment * alignment'
+
+ if [ "${octa}" -gt "${swap}" ] ; then
+ let 'left = ( left - swap ) / alignment * alignment'
+ swap_bytes=${swap}
+ elif [ "${octa}" -gt "${ram_bytes}" ] ; then
+ let 'left = ( left - ram_bytes ) / alignment * alignment'
+ swap_bytes=${ram_bytes}
+ else
+ swap_bytes=0
+ swap_start_sector=0
+ fi
+
+ if [ "${swap_bytes}" -gt "0" ] ; then
+ let 'home_end_sector = home_start_sector + ( left / unit_size - 1 )'
+ let 'swap_start_sector = home_end_sector + 1'
+ else
+ let 'home_end_sector = sectors - 1'
+ fi
+
+ let 'home_bytes = ( home_end_sector - home_start_sector + 1 ) * unit_size'
+
+ if [ "${partition_table_type}" = "g" ] ; then
+ fdisk --wipe=always --wipe-partition=always ${disk} 1>/dev/null 2>/dev/null <<EOF
+n
+$home_part_number
+$home_start_sector
+$home_end_sector
+t
+$home_part_number
+$guid
+x
+n
+$home_part_number
+$name
+r
+w
+EOF
+ else
+ fdisk --wipe=always --wipe-partition=always ${disk} 1>/dev/null 2>/dev/null <<EOF
+n
+p
+$home_part_number
+$home_start_sector
+$home_end_sector
+t
+$home_part_number
+$type
+w
+EOF
+ fi
+ else
+ home_bytes=0
+ home_start_sector=0
+ swap_bytes=0
+ swap_start_sector=0
+ fi
+}
+
+create_SWAP_partition()
+{
+ local disk=${1}
+
+ local name="Linux swap"
+ local guid="0657fd6d-a4ab-43c4-84e5-0933c84b4f4f"
+ local type="82"
+
+ if [ "${swap_bytes}" -gt "0" ] ; then
+ if [ "${partition_table_type}" = "g" ] ; then
+ fdisk --wipe=always --wipe-partition=always ${disk} 1>/dev/null 2>/dev/null <<EOF
+n
+$swap_part_number
+
+
+t
+$swap_part_number
+$guid
+x
+n
+$swap_part_number
+$name
+r
+w
+EOF
+ else
+ fdisk --wipe=always --wipe-partition=always ${disk} 1>/dev/null 2>/dev/null <<EOF
+n
+p
+$swap_part_number
+
+
+t
+$swap_part_number
+$type
+w
+EOF
+ fi
+ fi
+}
+
+umount_target_partitions()
+{
+ local disk=${1}
+ for dev in `mount | grep "^${disk}" | tr -s ' ' | cut -f1 -d' '` ; do
+ umount ${dev} 2>/dev/null 1>/dev/null
+ done
+}
+
+format_disk()
+{
+ local dev=${1}
+
+ umount_target_partitions "${dev}"
+
+ clean_disk "${dev}"
+ if [ "x${uefi_bytes}" != "x" ] ; then
+ create_EFI_partition "${dev}"
+ fi
+
+ create_ROOT_partition "${dev}"
+ create_HOME_partition "${dev}"
+ create_SWAP_partition "${dev}"
+}
+
+format_by_fdisk()
+{
+ local disk=${1}
+ local fdiskprg=`which fdisk 2> /dev/null`
+
+ umount_target_partitions "${disk}"
+
+ clean_disk "${disk}"
+ if [ "x${uefi_bytes}" != "x" ] ; then
+ create_EFI_partition "${disk}"
+ fi
+
+ clear
+ ${fdiskprg} ${disk}
+ ret=$?
+ if [ ${ret} -ne 0 ] ; then
+ fatal_error_dialog "${fdiskprg} returns bad status. Exit ${program}."
+ push_log "ERROR: ${fdiskprg} returns bad status"
+ push_log "Aborted due to an error"
+ push_err "ERROR: ${fdiskprg} returns bad status"
+ EXITSTATUS=20
+ exit
+ fi
+}
+
+ask_formatting()
+{
+ local disk=${1}
+
+ local height=16
+ local items=3
+
+ local fdiskprg=`which fdisk 2> /dev/null`
+
+ cat > $TMP/menu-format$$ << EOF
+--colors --clear $nocancel \\
+--backtitle "\Z7Radix\Zn \Z1cross\Zn\Z7 Linux\Zn" \\
+--title " \Z0Format the\Zn \Z4${disk}\Zn \Z0target device\Zn " \\
+--menu "\\n\\
+EOF
+
+ cat >> $TMP/menu-format$$ << EOF
+ The target disk should has at least one \Z1Linux\Zn partition for root\\n\\
+ file system. Also you may want to have \Z1/home\Zn and \Z1swap\Zn partitions.\\n\\
+EOF
+
+ if [ "x${uefi_bytes}" != "x" ] ; then
+ let 'height += 3'
+ cat >> $TMP/menu-format$$ << EOF
+\\n\\
+ The target disk also should has \Z1EFI\Zn partition for boot the system.\\n\\
+ The drive must be formated using \Z1G\ZnUID \Z1P\Znartition \Z1T\Znable (\Z1GPT\Zn).\\n\\
+EOF
+ fi
+
+ cat >> $TMP/menu-format$$ << EOF
+\\n\\
+ \Z1NOTE\Zn: All data on the target \Z4${disk}\Zn device will be destroyed.\\
+EOF
+
+ cat >> $TMP/menu-format$$ << EOF
+\\n\\n\\
+ Please select method of formatting:\\
+" ${height} 74 ${items} \\
+EOF
+
+ if [ "x${fdiskprg}" != "x" -a -x "${fdiskprg}" ] ; then
+ cat >> $TMP/menu-format$$ << EOF
+"Fdisk" "Use '\Zb${fdiskprg}\ZB' for formatting" \\
+EOF
+ fi
+
+ cat >> $TMP/menu-format$$ << EOF
+"Default" "Use default procedure for formatting" \\
+EOF
+
+ cat >> $TMP/menu-format$$ << EOF
+"Exit" "Terminate the Radix cross Linux installation" \\
+EOF
+
+ $DIALOG --default-item "Default" --file $TMP/menu-format$$ 2> $TMP/format$$
+ ret=$?
+ if [ ${ret} -eq 1 -o ${ret} -eq 255 ]; then
+ rm -f $TMP/format$$
+ rm -f $TMP/menu-format$$
+ return $ret
+ fi
+ result=`cat $TMP/format$$`
+ rm -f $TMP/format$$
+ rm -f $TMP/menu-format$$
+ if [ "${result}" = "Exit" ]; then
+ push_log "Done"
+ exit
+ elif [ "${result}" = "Fdisk" ]; then
+ format_by_fdisk "${disk}"
+ else
+ format_disk "${disk}"
+ fi
+}
+
+#
+# End of Disk Format functions.
+#
+################################################################
+
+################################################################
+#
+# Check Custom REPO functions:
+#
+welcome_custom_setup()
+{
+ cat > $TMP/welcome-setup-rc$$ << EOF
+use_colors = ON
+shadow_color = (BLACK,BLACK,OFF)
+screen_color = (WHITE,BLACK,ON)
+use_shadow = OFF
+dialog_color = (WHITE,BLACK,OFF)
+title_color = (WHITE,BLACK,ON)
+border_color = (BLACK,BLACK,OFF)
+border2_color = (BLACK,BLACK,OFF)
+button_active_color = (WHITE,BLACK,ON)
+button_inactive_color = (WHITE,BLACK,OFF)
+button_key_active_color = (RED,BLACK,ON)
+button_key_inactive_color = (WHITE,BLACK,ON)
+button_label_active_color = (WHITE,BLACK,ON)
+button_label_inactive_color = (WHITE,BLACK,ON)
+EOF
+
+ cat > $TMP/welcome-setup-help$$ << EOF
+
+Version \Zb${version}\Zn
+Copyright (c) 2009-`date +%Y`, Andrey V.Kosteltsev. All rights reserved.
+${DISTRO_HOME_URL}
+
+Built for: \Zb${hardware}\Zn
+Toolchain: \Zb${toolchain}\Zn
+
+Now you can install \Zb${DISTRO_CAPTION}-${version}\Zn from:
+
+ ${repo}/
+
+directory to you hard drive or internal flash.
+
+Enjoy!
+
+EOF
+
+ DIALOGRC=$TMP/welcome-setup-rc$$ \
+ $DIALOG --colors --clear \
+ --backtitle "\Z7${DISTRO_CAPTION}\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " Setup ${DISTRO_CAPTION} \Z1cross\Zn Linux " \
+ --no-label " Exit Setup " \
+ --yes-label " Continue " \
+ --yesno "$(cat $TMP/welcome-setup-help$$)" 19 74
+ ret=$?
+ rm -f $TMP/welcome-setup-help$$
+ if [ $ret -ne 0 ] ; then
+ exit
+ fi
+}
+
+ask_custom_repo()
+{
+ cat > $TMP/select-custom-repo$$ << EOF
+
+ The selected custom REPO is invalid.
+ Do you want to select Custom REPO to install from?
+
+EOF
+
+ $DIALOG --colors --defaultno --clear \
+ --backtitle "\Z7${DISTRO_CAPTION}\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0Setup:\Zn \Z4\ZbSelect Custom Repository\ZB\Zn " \
+ --no-label "Exit Setup" \
+ --yes-label " Select " \
+ --yesno "$(cat $TMP/select-custom-repo$$)" 9 74
+ ret=$?
+ rm -f $TMP/select-custom-repo$$
+ if [ $ret -ne 0 ] ; then
+ push_log "Done"
+ exit
+ fi
+}
+
+select_custom_repo()
+{
+ cat > $TMP/dselect-help$$ << EOF
+
+ Use the space-bar to copy the current selection into the text-entry
+ window. Press '/' and then Up Arrow to go to selected directoy.
+
+EOF
+
+ result=`$DIALOG --stdout --colors \
+ --backtitle "\Z7Radix\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0\ZbSelect the\ZB\Zn \Z0\ZbCustom \Z1REPO\Zn \Z0\ZbDirectory (\ZB\Zn\Z4press F1 for help\Zn\Z0\Zb):\ZB\Zn " \
+ --hfile $TMP/dselect-help$$ \
+ --no-shadow \
+ --dselect ${repo} 7 74`
+ ret=$?
+ if [ $ret -eq 0 ]; then
+ custom_repo="`echo ${result} | sed 's,/$,,'`"
+ else
+ custom_repo=no
+ # continue with default REPO
+ fi
+}
+
+check_custom_repo()
+{
+ rp="${1}"
+
+ rp="`echo ${rp} | sed 's,/$,,'`"
+
+ if ! `echo "${rp}" | grep -q "^/"` ; then
+ ask_custom_repo
+ select_custom_repo
+ if [ "x${custom_repo}" != "xno" ] ; then
+ check_custom_repo "${custom_repo}"
+ else
+ return
+ fi
+ fi
+
+ if [ ! -d "${rp}" ] ; then
+ ask_custom_repo
+ select_custom_repo
+ if [ "x${custom_repo}" != "xno" ] ; then
+ check_custom_repo "${custom_repo}"
+ else
+ return
+ fi
+ fi
+
+ local depth=`echo "${rp}" | grep -o '/' - | wc -l`
+ if [ "${depth}" -lt "3" ] ; then
+ ask_custom_repo
+ select_custom_repo
+ if [ "x${custom_repo}" != "xno" ] ; then
+ check_custom_repo "${custom_repo}"
+ else
+ return
+ fi
+ fi
+
+ local d=`dirname "${rp}"`
+ local hw=`basename "${rp}"`
+ local th=`basename "${d}"`
+ d=`dirname "${d}"`
+ local v=`basename "${d}"`
+
+ if ! `echo ${v} | grep -q '^[0-9]*\.[0-9]*\.[0-9]*'` ; then
+ ask_custom_repo
+ select_custom_repo
+ if [ "x${custom_repo}" != "xno" ] ; then
+ check_custom_repo "${custom_repo}"
+ else
+ return
+ fi
+ fi
+
+ if [ ! -r "${rp}/${hw}.pkglist" ] ; then
+ ask_custom_repo
+ select_custom_repo
+ if [ "x${custom_repo}" != "xno" ] ; then
+ check_custom_repo "${custom_repo}"
+ else
+ return
+ fi
+ elif [ ! -L "${rp}/.pkglist" ] ; then
+ ( cd "${rp}" ; ln -sf ${hw}.pkglist .pkglist )
+ fi
+
+ version=$v
+ toolchain=$th
+ hardware=$hw
+ repo=${rp}
+
+ custom_repo=yes
+}
+
+#
+# End of Check Custom REPO functions.
+#
+################################################################
+
+################################################################
+#
+# Check Source REPO functions:
+#
+check_repo()
+{
+ local rp="${1}"
+
+ if [ ! -d "${rp}" ] ; then
+ return 1
+ fi
+
+ if [ ! -r "${rp}/${HARDWARE}.pkglist" ] ; then
+ return 1
+ elif [ ! -L "${rp}/.pkglist" ] ; then
+ ( cd "${rp}" ; ln -sf ${HARDWARE}.pkglist .pkglist )
+ fi
+
+ return 0
+}
+#
+# End of Check Source REPO functions.
+#
+################################################################
+
+################################################################
+#
+# Check Target device functions:
+#
+major_number()
+{
+ local part=${1}
+ local name=`basename ${part}`
+
+ local major=`ls -l /dev | grep -v ^l | grep ${name} | tr -s ' ' | sed 's/,//g' | cut -f5 -d' ' | sort -u | tr '\n' ',' | sed 's/,$//'`
+ echo "${major}"
+}
+
+#
+# returns the prefix 'p' of partition number if applicable
+#
+part_prefix()
+{
+ local dev=${1}
+ if `echo ${dev: -1} | grep -q '[0-1]'` ; then
+ p=p
+ fi
+}
+
+check_current_device()
+{
+ current_device=`${WHERE} -n -o disk`
+ current_root=`${WHERE} -n -o root`
+ pline=`LANG=en_US.UTF-8 fdisk -l --bytes ${current_device} | grep "^${current_root}" | tr -s ' '`
+ active=`echo "${pline}" | cut -f2 -d' '`
+ if [ "${partition_table_type}" = "o" ] ; then
+ if [ "${active}" = "*" ] ; then
+ rootfs_min_bytes=`echo "${pline}" | cut -f6 -d' '`
+ fi
+ else
+ rootfs_min_bytes=`echo "${pline}" | cut -f5 -d' '`
+ fi
+}
+
+ask_target_device()
+{
+ cat > $TMP/select-target-device$$ << EOF
+
+ Target device is not selected or invalid.
+ Do you want to select Target Device to install?
+
+EOF
+
+ $DIALOG --colors --defaultno --clear \
+ --backtitle "\Z7${DISTRO_CAPTION}\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0Setup:\Zn \Z4\ZbSelect Target Device\ZB\Zn " \
+ --no-label "Exit Setup" \
+ --yes-label " Select " \
+ --yesno "$(cat $TMP/select-target-device$$)" 9 74
+ ret=$?
+ rm -f $TMP/select-target-device$$
+ if [ $ret -ne 0 ] ; then
+ push_log "Done"
+ exit
+ fi
+}
+
+select_target_device()
+{
+ cat > $TMP/device-help$$ << EOF
+--colors --clear \\
+--backtitle "\Z7Radix\Zn \Z1cross\Zn\Z7 Linux\Zn" \\
+--title " \Z0\ZbSelect the destination\ZB\Zn " \\
+--menu "\\n\\
+ If the desired device is not displayed in the following list,\\n\\
+ please insert the disk and repeat installation.\\n\\
+\\n\\
+ Please select the target device:\\
+" 14 74 3 \\
+EOF
+
+ for dev in `lsblk -ldn -o name` ; do
+ #
+ # Skip 'mtd.*', 'mmcblk[0-9]*boot.*':
+ #
+ if `echo ${dev} | grep -q 'mtd.*\|mmcblk[0-9]*boot.*'` ; then
+ continue
+ fi
+ #
+ # Exclude current device:
+ #
+ local sfound=`echo "${current_device}" | grep "/dev/${dev}"`
+ if [ "x${sfound}" = "x" ] ; then
+ echo "\"/dev/$dev\" \" \" \\" >> $TMP/device-help$$
+ fi
+ done
+
+ ${DIALOG} --file $TMP/device-help$$ 2> $TMP/devmame$$
+ ret=$?
+ if [ $ret -eq 1 -o $ret -eq 255 ]; then
+ rm -f $TMP/devmame$$
+ rm -f $TMP/device-help$$
+ # continue: see check_target_device()
+ fi
+ result=`cat $TMP/devmame$$`
+ rm -f $TMP/devmame$$
+ rm -f $TMP/device-help$$
+
+ device=$result
+}
+
+check_target_device()
+{
+ while [ "x${device}" = "x" -o "x${device}" = "x${current_device}" ] ; do
+ ask_target_device
+ select_target_device
+ done
+
+ if [ -b "${device}" ] ; then
+ local base=`basename ${device}`
+ local mjrs=`major_number ${device}`
+ local line="`lsblk -I ${mjrs} -l -o name,type | grep \"${base} \" | tr -s ' ' | head -n 1`"
+ if [ "$line" != "" ] ; then
+ local name=`echo "${line}" | tr -s ' ' | cut -f1 -d' '`
+ local type=`echo "${line}" | tr -s ' ' | cut -f2 -d' '`
+ if [ "${base}" = "${name}" -a "${type}" != "disk" -a "${type}" != "loop" ] ; then
+ push_log "ERROR: The DEVICE (${device}) is not a physical disk"
+ device=
+ check_target_device
+ fi
+ else
+ push_log "ERROR: The DEVICE ($device) not found"
+ device=
+ check_target_device
+ fi
+ else
+ push_log "ERROR: The DEVICE ($device) not a block device"
+ device=
+ check_target_device
+ fi
+
+ part_prefix ${device}
+ disk_geometry ${device}
+}
+#
+# End of Check Target device functions.
+#
+################################################################
+
+################################################################
+#
+# Partitions functions.
+#
+make_ext2() {
+ local pname=${1}
+ local plabel=${2}
+
+ local psize=`get_partition_size ${pname}`
+ let "psize = psize / 1024"
+
+ $DIALOG --colors \
+ --backtitle "\Z7Radix\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0Formatting\Zn \Z4\Zb$pname\ZB\Zn " \
+ --infobox "\n Formatting \Z1${pname}\ZB\Zn\n\n\
+ Size in 1K blocks: \Z4${psize}\Zn\n\
+ Filesystem type: \Z1ext2\Zn\n" 8 74
+ if `mount | grep -q "^${pname} " 1>/dev/null 2>/dev/null` ; then
+ umount ${pname} 2>/dev/null
+ fi
+ if [ "x${plabel}" != "x" ] ; then
+ mkfs.ext2 -q -F -L "${plabel}" ${pname} 1>/dev/null 2>/dev/null
+ else
+ mkfs.ext2 -q -F ${pname} 1>/dev/null 2>/dev/null
+ fi
+}
+
+make_ext3() {
+ local pname=${1}
+ local plabel=${2}
+
+ local psize=`get_partition_size ${pname}`
+ let "psize = psize / 1024"
+
+ $DIALOG --colors \
+ --backtitle "\Z7Radix\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0Formatting\Zn \Z4\Zb$pname\ZB\Zn " \
+ --infobox "\n Formatting \Z1${pname}\ZB\Zn\n\n\
+ Size in 1K blocks: \Z4${psize}\Zn\n\
+ Filesystem type: \Z1ext3\Zn\n" 8 74
+ if `mount | grep -q "^${pname} " 1>/dev/null 2>/dev/null` ; then
+ umount ${pname} 2>/dev/null
+ fi
+ if [ "x${plabel}" != "x" ] ; then
+ mkfs.ext3 -q -F -L "${plabel}" ${pname} 1>/dev/null 2>/dev/null
+ else
+ mkfs.ext3 -q -F ${pname} 1>/dev/null 2>/dev/null
+ fi
+}
+
+make_ext4() {
+ local pname=${1}
+ local plabel=${2}
+
+ local psize=`get_partition_size ${pname}`
+ let "psize = psize / 1024"
+
+ $DIALOG --colors \
+ --backtitle "\Z7Radix\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0Formatting\Zn \Z4\Zb$pname\ZB\Zn " \
+ --infobox "\n Formatting \Z1${pname}\ZB\Zn\n\n\
+ Size in 1K blocks: \Z4${psize}\Zn\n\
+ Filesystem type: \Z1ext4\Zn\n" 8 74
+ if `mount | grep -q "^${pname} " 1>/dev/null 2>/dev/null` ; then
+ umount ${pname} 2>/dev/null
+ fi
+ if [ "x${plabel}" != "x" ] ; then
+ mkfs.ext4 -q -F -L "${plabel}" ${pname} 1>/dev/null 2>/dev/null
+ else
+ mkfs.ext4 -q -F ${pname} 1>/dev/null 2>/dev/null
+ fi
+}
+
+make_vfat() {
+ local pname=${1}
+ local plabel=${2}
+
+ local psize=`get_partition_size ${pname}`
+ let "psize = psize / 1024"
+
+ $DIALOG --colors \
+ --backtitle "\Z7Radix\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0Formatting\Zn \Z4\Zb$pname\ZB\Zn " \
+ --infobox "\n Formatting \Z1${pname}\ZB\Zn\n\n\
+ Size in 1K blocks: \Z4${psize}\Zn\n\
+ Filesystem type: \Z1vfat\Zn\n" 8 74
+ if `mount | grep -q "^${pname} " 1>/dev/null 2>/dev/null` ; then
+ umount ${pname} 2>/dev/null
+ fi
+ if [ "x${plabel}" != "x" ] ; then
+ mkfs.fat -F 32 -n "${plabel}" ${pname} 1>/dev/null 2>/dev/null
+ else
+ mkfs.fat -F 32 ${pname} 1>/dev/null 2>/dev/null
+ fi
+}
+
+make_btrfs() {
+ local pname=${1}
+ local plabel=${2}
+
+ local psize=`get_partition_size ${pname}`
+ let "psize = psize / 1024"
+
+ $DIALOG --colors \
+ --backtitle "\Z7Radix\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0Formatting\Zn \Z4\Zb$pname\ZB\Zn " \
+ --infobox "\n Formatting \Z1${pname}\ZB\Zn\n\n\
+ Size in 1K blocks: \Z4${psize}\Zn\n\
+ Filesystem type: \Z1btrfs\Zn\n" 8 74
+ if `mount | grep -q "^${pname} " 1>/dev/null 2>/dev/null` ; then
+ umount ${pname} 2>/dev/null
+ fi
+ if [ "x${plabel}" != "x" ] ; then
+ mkfs.btrfs -d single -m single -L "${plabel}" ${pname} 1>/dev/null 2>/dev/null
+ else
+ mkfs.btrfs -d single -m single ${pname} 1>/dev/null 2>/dev/null
+ fi
+}
+
+make_jfs() {
+ local pname=${1}
+ local plabel=${2}
+
+ local psize=`get_partition_size ${pname}`
+ let "psize = psize / 1024"
+
+ $DIALOG --colors \
+ --backtitle "\Z7Radix\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0Formatting\Zn \Z4\Zb$pname\ZB\Zn " \
+ --infobox "\n Formatting \Z1${pname}\ZB\Zn\n\n\
+ Size in 1K blocks: \Z4${psize}\Zn\n\
+ Filesystem type: \Z1jfs\Zn\n" 8 74
+ if `mount | grep -q "^${pname} " 1>/dev/null 2>/dev/null` ; then
+ umount ${pname} 2>/dev/null
+ fi
+ if [ "x${plabel}" != "x" ] ; then
+ mkfs.jfs -q -L "${plabel}" ${pname} 1>/dev/null 2>/dev/null
+ else
+ mkfs.jfs -q ${pname} 1>/dev/null 2>/dev/null
+ fi
+}
+
+make_xfs() {
+ local pname=${1}
+ local plabel=${2}
+
+ local psize=`get_partition_size ${pname}`
+ let "psize = psize / 1024"
+
+ $DIALOG --colors \
+ --backtitle "\Z7Radix\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0Formatting\Zn \Z4\Zb$pname\ZB\Zn " \
+ --infobox "\n Formatting \Z1${pname}\ZB\Zn\n\n\
+ Size in 1K blocks: \Z4${psize}\Zn\n\
+ Filesystem type: \Z1xfs\Zn\n" 8 74
+ if `mount | grep -q "^${pname} " 1>/dev/null 2>/dev/null` ; then
+ umount ${pname} 2>/dev/null
+ fi
+ if [ "x${plabel}" != "x" ] ; then
+ mkfs.xfs -q -f -L "${plabel}" ${pname} 1>/dev/null 2>/dev/null
+ else
+ mkfs.xfs -q -f ${pname} 1>/dev/null 2>/dev/null
+ fi
+}
+
+make_swap() {
+ local pname=${1}
+ local plabel=${2}
+
+ local psize=`get_partition_size ${pname}`
+ let "psize = psize / 1024"
+
+ $DIALOG --colors \
+ --backtitle "\Z7Radix\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0Formatting\Zn \Z4\Zb$pname\ZB\Zn " \
+ --infobox "\n Formatting \Z1${pname}\ZB\Zn\n\n\
+ Size in 1K blocks: \Z4${psize}\Zn\n\
+ Filesystem type: \Z1swap\Zn\n" 8 74
+ if `mount | grep -q "^${pname} " 1>/dev/null 2>/dev/null` ; then
+ umount ${pname} 2>/dev/null
+ fi
+ if [ "x${plabel}" != "x" ] ; then
+ mkswap -v1 -L "${plabel}" ${pname} 1>/dev/null 2>/dev/null
+ else
+ mkswap -v1 ${pname} 1>/dev/null 2>/dev/null
+ fi
+}
+
+partlist=$TMP/plist.$$
+partitems=$TMP/pitems.$$
+
+gen_parts_list()
+{
+ local disk=${1}
+ local devname=`echo ${disk} | sed -e 's,^/dev/,,'`
+
+ if [ "${partition_table_type}" = "g" ] ; then
+ uefi_id="EFI System"
+ linux_id="Linux filesystem"
+ swap_id="Linux swap"
+ else
+ uefi_id="ef"
+ linux_id="83"
+ swap_id="82"
+ fi
+
+ truncate -s0 $partlist
+
+ local first_uefi= ; local first_root= ; local first_home=
+
+ local plist=`LANG=en_US.UTF-8 lsblk -lb -o name,size,type,fstype,mountpoint | grep ${devname} | tr -s ' '`
+ echo -e "${plist}" | while read -r line ; do
+ words=`echo "${line}" | wc -w`
+
+ pname= ; psize= ; ptype= ; fstype= ; mpoint= ; partuuid= ; uuid=
+
+ pname=`echo "${line}" | cut -f1 -d ' '`
+ if [ ${words} -ge 2 ] ; then
+ psize=`echo "${line}" | cut -f2 -d ' '`
+ fi
+ if [ ${words} -ge 3 ] ; then
+ ptype=`echo "${line}" | cut -f3 -d ' '`
+ if [ "${ptype}" != "part" ] ; then
+ continue
+ fi
+ fi
+ if [ ${words} -ge 4 ] ; then
+ fstype=`echo "${line}" | cut -f4 -d ' '`
+ fi
+ if [ ${words} -ge 5 ] ; then
+ mpoint=`echo "${line}" | cut -f5 -d ' '`
+ fi
+
+ #
+ # recomended values:
+ #
+ used=
+ # skip active partition sign [asterisk '*']
+ local pline=`LANG=en_US.UTF-8 fdisk -l /dev/${devname} | grep "^/dev/${pname}" | tr -s ' '`
+ active=`echo "${pline}" | cut -f2 -d' '`
+ if [ "${partition_table_type}" = "g" ] ; then
+ partid=`echo "${pline}" | cut -f6,7 -d' '`
+ else
+ if [ "${active}" = "*" ] ; then
+ partid=`echo "${pline}" | cut -f7 -d' '`
+ else
+ partid=`echo "${pline}" | cut -f6 -d' '`
+ fi
+ fi
+
+ if [ "${partid}" = "${swap_id}" ] ; then
+ mpoint="swap"
+ fstype="swap"
+ fi
+ if [ "x${first_uefi}" = "x" ] ; then
+ if [ "${partid}" = "${uefi_id}" ] ; then
+ first_boot="/dev/${pname}"
+ mpoint="/boot/efi"
+ fstype="vfat"
+ used="use"
+ fi
+ fi
+ if [ "x${first_root}" = "x" ] ; then
+ if [ "${partid}" = "${linux_id}" ] ; then
+ first_root="/dev/${pname}"
+ mpoint="/"
+ fstype="ext4"
+ fi
+ fi
+ if [ "x${first_root}" != "x" -a "x${first_home}" = "x" ] ; then
+ if [ "${partid}" = "${linux_id}" ] ; then
+ if [ "${first_root}" != "/dev/${pname}" ] ; then
+ first_home="/dev/${pname}"
+ mpoint="/home"
+ fstype="ext4"
+ fi
+ fi
+ fi
+
+ echo "/dev/${pname}:${psize}:${fstype}:${mpoint}:${used}:${partuuid}:${uuid}" | tr -s ' ' >> ${partlist}
+ done
+}
+
+gen_parts_menu_items()
+{
+ local disk=${1}
+ local devname=`echo ${disk} | sed -e 's,^/dev/,,'`
+
+ local first_uefi= ; local first_root= ; local first_home=
+
+ truncate -s0 $partitems
+
+ cat "$partlist" | while read -r line ; do
+ pname= ; psize= ; ptype= ; fstype= ; mpoint=
+
+ pname=`echo "$line" | cut -f1 -d':'`
+
+ #
+ # get partition type (skipping active partition sign [asterisk '*']):
+ #
+ pline=`LANG=en_US.UTF-8 fdisk -l ${disk} | grep "^${pname}" | tr -s ' '`
+ active=`echo "${pline}" | cut -f2 -d' '`
+ if [ "${partition_table_type}" = "g" ] ; then
+ ptype=`echo "${pline}" | cut -f6,7 -d' '`
+ else
+ if [ "${active}" = "*" ] ; then
+ ptype=`echo "${pline}" | cut -f7 -d' '`
+ else
+ ptype=`echo "${pline}" | cut -f6 -d' '`
+ fi
+ fi
+
+ if [ "${partition_table_type}" = "g" ] ; then
+ if [ "${ptype}" = "EFI System" ] ; then
+ ptype="ef"
+ fi
+ if [ "${ptype}" = "Linux filesystem" ] ; then
+ ptype="83"
+ fi
+ if [ "${ptype}" = "Linux swap" ] ; then
+ ptype="82"
+ fi
+ fi
+
+ ptype=`printf ' %02s ' "${ptype}"`
+
+ psize=`echo "${line}" | cut -f2 -d':'`
+ let "psize = psize / 1048576"
+ psize=`printf '%6d' $psize`
+
+ fstype=`echo "${line}" | cut -f3 -d':'`
+ fstype=`printf '%-8s' "${fstype}"`
+
+ mpoint=`echo "${line}" | cut -f4 -d':'`
+
+ used=`echo "${line}" | cut -f5 -d':'`
+ if [ "${used}" == "use" ] ; then
+ fstype="\\Z4${fstype}\\Zn"
+ mpoint="\\Z4${mpoint}\\Zn"
+ fi
+ echo "\"${pname}\" \"${psize}M ${ptype} ${fstype} ${mpoint}\" \\" | sed -e 's,\s\+$,,g' >> ${partitems}
+ done
+}
+
+get_partition_size()
+{
+ local dev=${1}
+ local psize=`cat ${partlist} | grep "^${dev}" | cut -f2 -d':'`
+ echo -n "${psize}"
+}
+
+get_recomended_fstype()
+{
+ local dev=${1}
+ local fstype=`cat ${partlist} | grep "^${dev}" | cut -f3 -d':'`
+ echo -n "${fstype}"
+}
+
+set_recomended_fstype() {
+ local dev=${1}
+ local fstype=${2}
+ local name=`echo ${dev} | sed -e 's,/dev/,,'`
+ local psize=`cat ${partlist} | grep "^${dev}" | cut -f2 -d':'`
+ local mpoint=`cat ${partlist} | grep "^${dev}" | cut -f4 -d':'`
+ local puuid=`cat ${partlist} | grep "^${dev}" | cut -f6 -d':'`
+ local uuid=`cat ${partlist} | grep "^${dev}" | cut -f7 -d':'`
+ sed -i "/${name}/c\/dev/${name}:${psize}:${fstype}:${mpoint}:use:${puuid}:${uuid}" ${partlist}
+}
+
+get_recomended_mpoint()
+{
+ local dev=${1}
+ local mpoint=`cat ${partlist} | grep "^${dev}" | cut -f4 -d':'`
+ echo -n "${mpoint}"
+}
+
+set_recomended_mpoint()
+{
+ local dev=${1}
+ local mpoint=${2}
+ local name=`echo ${dev} | sed -e 's,/dev/,,'`
+ local psize=`cat ${partlist} | grep "^${dev}" | cut -f2 -d':'`
+ local fstype=`cat ${partlist} | grep "^${dev}" | cut -f3 -d':'`
+ local puuid=`cat ${partlist} | grep "^${dev}" | cut -f6 -d':'`
+ local uuid=`cat ${partlist} | grep "^${dev}" | cut -f7 -d':'`
+ sed -i "/${name}/c\/dev/${name}:${psize}:${fstype}:${mpoint}:use:${puuid}:${uuid}" ${partlist}
+}
+
+get_rootfs_devname()
+{
+ cat "${partlist}" | while read -r line ; do
+ pname= ; fstype= ; mpoint=
+
+ pname=`echo "${line}" | cut -f1 -d':'`
+ fstype=`echo "${line}" | cut -f3 -d':'`
+ mpoint=`echo "${line}" | cut -f4 -d':'`
+
+ if [ "${mpoint}" = "/" ] ; then
+ echo -n "${pname}"
+ break
+ fi
+ done
+}
+
+get_uefi_devname()
+{
+ cat "${partlist}" | while read -r line ; do
+ pname= ; fstype= ; mpoint=
+
+ pname=`echo "${line}" | cut -f1 -d':'`
+ fstype=`echo "${line}" | cut -f3 -d':'`
+ mpoint=`echo "${line}" | cut -f4 -d':'`
+
+ if [ "${mpoint}" = "/boot/efi" ] ; then
+ echo -n "${pname}"
+ break
+ fi
+ done
+}
+
+get_part_uuid()
+{
+ local dev=${1}
+ local puuid=`cat ${partlist} | grep "^${dev}" | cut -f6 -d':'`
+ echo -n "${puuid}"
+}
+
+set_part_uuid()
+{
+ local dev=${1}
+ local puuid=${2}
+ local name=`echo ${dev} | sed -e 's,/dev/,,'`
+ local psize=`cat ${partlist} | grep "^${dev}" | cut -f2 -d':'`
+ local fstype=`cat ${partlist} | grep "^${dev}" | cut -f3 -d':'`
+ local mpoint=`cat ${partlist} | grep "^${dev}" | cut -f4 -d':'`
+ local used=`cat ${partlist} | grep "^${dev}" | cut -f5 -d':'`
+ local uuid=`cat ${partlist} | grep "^${dev}" | cut -f7 -d':'`
+ sed -i "/${name}/c\/dev/${name}:${psize}:${fstype}:${mpoint}:${used}:${puuid}:${uuid}" ${partlist}
+}
+
+get_uuid()
+{
+ local dev=${1}
+ local uuid=`cat ${partlist} | grep "^${dev}" | cut -f7 -d':'`
+ echo -n "${uuid}"
+}
+
+set_uuid()
+{
+ local dev=${1}
+ local uuid=${2}
+ local name=`echo ${dev} | sed -e 's,/dev/,,'`
+ local psize=`cat ${partlist} | grep "^${dev}" | cut -f2 -d':'`
+ local fstype=`cat ${partlist} | grep "^${dev}" | cut -f3 -d':'`
+ local mpoint=`cat ${partlist} | grep "^${dev}" | cut -f4 -d':'`
+ local used=`cat ${partlist} | grep "^${dev}" | cut -f5 -d':'`
+ local puuid=`cat ${partlist} | grep "^${dev}" | cut -f6 -d':'`
+ sed -i "/${name}/c\/dev/${name}:${psize}:${fstype}:${mpoint}:${used}:${puuid}:${uuid}" ${partlist}
+}
+
+create_file_system()
+{
+ local pname=${1}
+ local fstype=${2}
+ local plabel=
+
+ mpoint=`get_recomended_mpoint ${pname}`
+ if [ "${mpoint}" = "/" ] ; then
+ plabel="root"
+ fi
+ if [ "${mpoint}" == "/home" ] ; then
+ plabel="home"
+ fi
+
+ cat > $TMP/partlabel-help$$ << EOF
+
+ Please specify the volume label for file system
+ on the \Z1${pname}\Zn partition.
+
+ Set the volume label or leave following field blank:
+EOF
+
+ result=`$DIALOG --stdout --colors \
+ --backtitle "\Z7Radix\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0Select Volume Label\Zn " \
+ --inputbox "$(cat $TMP/partlabel-help$$)" 12 74 "${plabel}"`
+ ret=$?
+ rm -f $TMP/partlabel-help$$
+ if [ ${ret} -eq 0 ]; then
+ plabel="${result}"
+ fi
+
+ case "${fstype}" in
+ ext2 )
+ make_ext2 "${pname}" "${plabel}"
+ ;;
+ ext3 )
+ make_ext3 "${pname}" "${plabel}"
+ ;;
+ ext4 )
+ make_ext4 "${pname}" "${plabel}"
+ ;;
+ vfat )
+ make_vfat "${pname}" "${plabel}"
+ ;;
+ btrfs )
+ make_btrfs "${pname}" "${plabel}"
+ ;;
+ * )
+ ;;
+ esac
+
+ set_recomended_fstype "${pname}" "${fstype}"
+}
+
+set_mount_point()
+{
+ local pname=${1}
+ local mpoint=${2}
+
+ cat > $TMP/mountpoint-help$$ << EOF
+
+ Please specify the mount directory of the \Z1${pname}\Zn partition.
+
+ Set the mount directory:
+EOF
+
+ result=`$DIALOG --stdout --colors \
+ --backtitle "\Z7Radix\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0Select Mount Point for\Zn \Z4${pname}\Zn " \
+ --inputbox "$(cat $TMP/mountpoint-help$$)" 11 74 "${mpoint}"`
+ ret=$?
+ rm -f $TMP/mountpoint-help$$
+ if [ ${ret} -eq 0 ]; then
+ mpoint="${result}"
+ fi
+ set_recomended_mpoint "${pname}" "${mpoint}"
+}
+
+format_partition()
+{
+ local pname=${1}
+
+ local fstype=`get_recomended_fstype ${pname}`
+ local mpoint=`get_recomended_mpoint ${pname}`
+
+ if [ "${fstype}" == "swap" ] ; then
+ cat > $TMP/mountpoint-help$$ << EOF
+
+ Radix Setup will now prepare your system's \Z1swap\Zn space.
+
+ Would you like to format \Z1${pname}\Zn using \Z4mkswap\Zn ?
+EOF
+
+ result=`$DIALOG --stdout --colors \
+ --backtitle "\Z7Radix\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0Format Swap Partition\Zn \Z4${pname}\Zn " \
+ --yes-label " OK " \
+ --yesno "$(cat $TMP/mountpoint-help$$)" 9 74`
+ ret=$?
+ rm -f $TMP/mountpoint-help$$
+ if [ ${ret} -eq 0 ]; then
+ make_swap ${pname} swap
+ else
+ return
+ fi
+ set_recomended_fstype "${pname}" "swap"
+ set_recomended_mpoint "${pname}" "swap"
+ return
+ else
+ unset EXT2 EXT3 EXT4 REISERFS BTRFS VFAT JFS XFS
+ if grep -wq ext2 /proc/filesystems 1>/dev/null 2>/dev/null ; then
+ EXT2="Ext2 is the traditional Linux file system and is fast and stable."
+ fi
+ if grep -wq ext3 /proc/filesystems 1>/dev/null 2>/dev/null ; then
+ EXT3="Ext3 is the journaling version of the Ext2 filesystem."
+ fi
+ if grep -wq ext4 /proc/filesystems 1>/dev/null 2>/dev/null ; then
+ EXT4="Ext4 is the successor to the ext3 filesystem."
+ fi
+ if grep -wq btrfs /proc/filesystems 1>/dev/null 2>/dev/null ; then
+ BTRFS="Btrfs is a B-tree copy-on-write filesystem."
+ fi
+ if grep -wq vfat /proc/filesystems 1>/dev/null 2>/dev/null ; then
+ VFAT="VFAT is a updated version of the FAT filesystem for Windows. VFAT's updates are mainly support for longer file names."
+ fi
+ if grep -wq jfs /proc/filesystems 1>/dev/null 2>/dev/null ; then
+ JFS="JFS is IBM's Journaled Filesystem, currently used in IBM enterprise servers."
+ fi
+ if grep -wq xfs /proc/filesystems 1>/dev/null 2>/dev/null ; then
+ XFS="XFS is SGI's journaling filesystem that originated on IRIX."
+ fi
+
+ cat > $TMP/filesystem-help$$ << EOF
+--colors --default-item "${fstype}" \\
+--backtitle "\Z7Radix\Zn \Z1cross\Zn\Z7 Linux\Zn" \\
+--title " \Z0Select File System for\Zn \Z4${pname}\Zn " \\
+--menu "\\n\\
+ Please select the type of filesystem to use for the specified device\\n\\
+ or hit <\Z1\ZbC\ZB\Zn\Zbancel\ZB> to leave existed filesystem. \\
+\\n\\n\\
+ Here are descriptions of the available filesystems:\\
+" 15 74 4 \\
+EOF
+
+ if [ "x${EXT2}" != "x" ]; then
+ echo "\"ext2\" \"Standard Linux Ext2 Filesystem\" \\" >> $TMP/filesystem-help$$
+ fi
+ if [ "x${EXT3}" != "x" ]; then
+ echo "\"ext3\" \"Ext3 Journaling Filesystem\" \\" >> $TMP/filesystem-help$$
+ fi
+ if [ "x${EXT4}" != "x" ]; then
+ echo "\"ext4\" \"Ext4 Journaling Filesystem\" \\" >> $TMP/filesystem-help$$
+ fi
+ if [ "x${VFAT}" != "x" ]; then
+ echo "\"vfat\" \"VFAT updated version of the FAT filesystem\" \\" >> $TMP/filesystem-help$$
+ fi
+ if [ "x${BTRFS}" != "x" ]; then
+ echo "\"btrfs\" \"Btrfs Copy-on-Write B-tree Filesystem\" \\" >> $TMP/filesystem-help$$
+ fi
+
+ $DIALOG --file $TMP/filesystem-help$$ 2> $TMP/filesystem$$
+ ret=$?
+ result=`cat $TMP/filesystem$$`
+ rm -f $TMP/filesystem$$
+ rm -f $TMP/filesystem-help$$
+ if [ ${ret} -eq 0 ]; then
+ fstype=${result}
+
+ # Create File System:
+ create_file_system "${pname}" "${fstype}"
+
+ # Set Mount Point:
+ set_mount_point "${pname}" "${mpoint}"
+ else
+ # Leave existed file system:
+ set_recomended_fstype "${pname}" "${fstype}"
+ # Set Mount Point:
+ set_mount_point "${pname}" "${mpoint}"
+ fi
+ fi
+}
+
+prepare_partitions()
+{
+ local disk=${1}
+
+ if [ "x${disk}" = "x" ] ; then
+ return 255
+ fi
+
+ local items=4
+ local height=21
+
+ gen_parts_list "${disk}"
+
+ while [ 0 ] ; do
+ cat > $TMP/menu-format$$ << EOF
+--colors --clear --cancel-label "Continue" \\
+--backtitle "\Z7Radix\Zn \Z1cross\Zn\Z7 Linux\Zn" \\
+--title " \Z0Create File Systems and Select\Zn \Z0Mountpoints\Zn " \\
+--menu "\\n\\
+EOF
+
+ cat >> $TMP/menu-format$$ << EOF
+ The target disk has fillowing partitions. Each menu item show the\\n\\
+ device name, size in MiB, and type of existing partition. Last two\\n\\
+ columns may shows recomended filesystem and mount point for the\\n\\
+ target system. Now you can create filesystem on each existing\\n\\
+ partitions (if needed) and choose or confirm mount point.\\n\\n\\
+ Already changed values will be shown in \Z4\ZbBlue\ZB\Zn (0x0000FF) color.\\
+EOF
+
+ cat >> $TMP/menu-format$$ << EOF
+\\n\\n\\
+ Please select each of partitions listed below,\\n\\
+ or if you're done, hit <Continue>:\\
+" $height 73 $items \\
+EOF
+
+ gen_parts_menu_items "${disk}"
+
+ cat "${partitems}" >> $TMP/menu-format$$
+
+ $DIALOG --file $TMP/menu-format$$ 2> $TMP/format$$
+ ret=$?
+ if [ ${ret} -eq 1 -o ${ret} -eq 255 ]; then
+ rm -f $TMP/format$$
+ rm -f $TMP/menu-format$$
+ # continue the installation
+ return ${ret}
+ fi
+ local pname=`cat $TMP/format$$`
+ rm -f $TMP/format$$
+ rm -f $TMP/menu-format$$
+
+ format_partition "${pname}"
+ done
+}
+
+partitions_loop()
+{
+ local disk=${1}
+
+ while [ 0 ] ; do
+ prepare_partitions "${disk}"
+ ret=$?
+ if [ ${ret} -eq 255 ]; then
+ # User can interrupt format partitions cycle by press Esc button
+ # on keyboard. In this case we have to exit setup because we not
+ # sure that user done all needs. If user say Esc again, then we
+ # will return him back to the cycle until user press <Continue>.
+ ask_exit_setup
+ continue
+ fi
+ if [ ${ret} -eq 1 ]; then
+ break
+ fi
+ done
+}
+
+check_partitions()
+{
+ local disk=${1}
+
+ local has_uefi=
+ local has_linux=
+ local retvalue=0
+
+ if [ "${partition_table_type}" = "g" ] ; then
+ if [ "x${uefi_bytes}" != "x" ] ; then
+ has_uefi=`LANG=en_US.UTF-8 fdisk -l ${disk} | tr -s ' ' | grep "^${disk}.* EFI System"`
+ if [ "x${has_uefi}" = "x" ] ; then
+ retvalue=1
+ fi
+ fi
+ has_linux=`LANG=en_US.UTF-8 fdisk -l ${disk} | tr -s ' ' | grep "^${disk}.* Linux filesystem"`
+ if [ "x${has_linux}" = "x" ] ; then
+ retvalue=2
+ fi
+ else
+ if [ "x${uefi_bytes}" != "x" ] ; then
+ has_uefi=`LANG=en_US.UTF-8 fdisk -l ${disk} | tr -s ' ' | grep "^${disk}.* ef .*"`
+ if [ "x${has_uefi}" = "x" ] ; then
+ retvalue=1
+ fi
+ fi
+ has_linux=`LANG=en_US.UTF-8 fdisk -l ${disk} | tr -s ' ' | grep "^${disk}.* 83 .*"`
+ if [ "x${has_linux}" = "x" ] ; then
+ retvalue=2
+ fi
+ fi
+
+ if [ "${retvalue}" -eq "1" ] ; then
+ error_dialog "Target device must have \Z1EFI\Zn partition."
+ ask_formatting "${disk}"
+ fi
+ if [ "${retvalue}" -eq "2" ] ; then
+ error_dialog "Target device must have at least one \Z1Linux\Zn partition."
+ ask_formatting "${disk}"
+ fi
+}
+
+check_filesystems()
+{
+ cat "${partlist}" | while read -r line ; do
+ pname= ; fstype= ; mpoint=
+
+ pname=`echo "${line}" | cut -f1 -d':'`
+ fstype=`echo "${line}" | cut -f3 -d':'`
+ mpoint=`echo "${line}" | cut -f4 -d':'`
+ used=`echo "${line}" | cut -f5 -d':'`
+
+ if [ "${used}" = "use" ] ; then
+ if [ "${mpoint}" = "/" ] ; then
+ name=`echo ${pname} | sed -e 's,/dev/,,'`
+ PARTUUID=`LANG=en_US.UTF-8 lsblk -ln -o name,partuuid | grep "^${name}" | tr -s ' ' | cut -f2 -d' '`
+ UUID=`LANG=en_US.UTF-8 lsblk -ln -o name,uuid | grep "^${name}" | tr -s ' ' | cut -f2 -d' '`
+ set_part_uuid "${pname}" "${PARTUUID}"
+ set_uuid "${pname}" "${UUID}"
+ elif [ "${mpoint}" = "/home" ] ; then
+ name=`echo ${pname} | sed -e 's,/dev/,,'`
+ PARTUUID=`LANG=en_US.UTF-8 lsblk -ln -o name,partuuid | grep "^${name}" | tr -s ' ' | cut -f2 -d' '`
+ UUID=`LANG=en_US.UTF-8 lsblk -ln -o name,uuid | grep "^${name}" | tr -s ' ' | cut -f2 -d' '`
+ set_part_uuid "${pname}" "${PARTUUID}"
+ set_uuid "${pname}" "${UUID}"
+ elif [ "${fstype}" = "vfat" -a "${mpoint}" = "/boot/efi" ] ; then
+ name=`echo ${pname} | sed -e 's,/dev/,,'`
+ PARTUUID=`LANG=en_US.UTF-8 lsblk -ln -o name,partuuid | grep "^${name}" | tr -s ' ' | cut -f2 -d' '`
+ UUID=`LANG=en_US.UTF-8 lsblk -ln -o name,uuid | grep "^${name}" | tr -s ' ' | cut -f2 -d' '`
+ set_part_uuid "${pname}" "${PARTUUID}"
+ set_uuid "${pname}" "${UUID}"
+ elif [ "${fstype}" = "swap" ] ; then
+ name=`echo ${pname} | sed -e 's,/dev/,,'`
+ PARTUUID=`LANG=en_US.UTF-8 lsblk -ln -o name,partuuid | grep "^${name}" | tr -s ' ' | cut -f2 -d' '`
+ UUID=`LANG=en_US.UTF-8 lsblk -ln -o name,uuid | grep "^${name}" | tr -s ' ' | cut -f2 -d' '`
+ set_part_uuid "${pname}" "${PARTUUID}"
+ set_uuid "${pname}" "${UUID}"
+ fi
+ fi
+ done
+}
+#
+# End of Partitions functions.
+#
+################################################################
+
+####################################################################
+#
+# prepare /etc/fstab - create temporary /etc/fstab according to
+# the table of formated partitions.
+#
+fstab=$TMP/fstab.$$
+
+prepare_dev_etc_fstab() {
+ cat > $fstab << EOF
+#
+# /etc/fstab
+#
+# --------------+----------------+-----------+------------------------------------+------+------
+# device | mount point | FS type | options | dump | pass
+# --------------+----------------+-----------+------------------------------------+------+------
+
+EOF
+
+ cat "${partlist}" | while read -r line ; do
+ pname= ; fstype= ; mpoint= ; dump= ; pass=
+
+ pname=`echo "${line}" | cut -f1 -d':'`
+ fstype=`echo "${line}" | cut -f3 -d':'`
+ mpoint=`echo "${line}" | cut -f4 -d':'`
+ used=`echo "${line}" | cut -f5 -d':'`
+
+ if [ "${used}" = "use" ] ; then
+ if [ "${mpoint}" = "/" ] ; then
+ dump=1 ; pass=1
+ elif [ "${mpoint}" = "/home" ] ; then
+ dump=1 ; pass=2
+ elif [ "${fstype}" = "vfat" -a "${mpoint}" = "/boot/efi" ] ; then
+ dump=1 ; pass=0
+ elif [ "${mpoint}" = "swap" ] ; then
+ dump=0 ; pass=0
+ else
+ dump=1 ; pass=2
+ fi
+ printf "%-16s %-16s %-11s %-36s %-6s %s\n" "${pname}" "${mpoint}" "${fstype}" "defaults" "${dump}" "${pass}" >> ${fstab}
+ fi
+ done
+ echo "" >> ${fstab}
+ printf "%-16s %-16s %-11s %-36s %-6s %s\n" "devpts" "/dev/pts" "devpts" "gid=5,mode=620" "0" "0" >> ${fstab}
+ printf "%-16s %-16s %-11s %-36s %-6s %s\n" "proc" "/proc" "proc" "defaults" "0" "0" >> ${fstab}
+ printf "%-16s %-16s %-11s %-36s %-6s %s\n" "tmpfs" "/dev/shm" "tmpfs" "nosuid,nodev,noexec" "0" "0" >> ${fstab}
+
+ cat >> ${fstab} << EOF
+
+# --------------+----------------+-----------+------------------------------------+------+------
+EOF
+}
+
+prepare_uuid_etc_fstab() {
+ cat > $fstab << EOF
+#
+# /etc/fstab
+#
+# ----------------------------------------+----------------+-----------+------------------------------------+------+------
+# device | mount point | FS type | options | dump | pass
+# ----------------------------------------+----------------+-----------+------------------------------------+------+------
+
+EOF
+
+ cat "${partlist}" | while read -r line ; do
+ pname= ; fstype= ; mpoint= ; dump= ; pass=
+
+ pname=`echo "${line}" | cut -f1 -d':'`
+ fstype=`echo "${line}" | cut -f3 -d':'`
+ mpoint=`echo "${line}" | cut -f4 -d':'`
+ used=`echo "${line}" | cut -f5 -d':'`
+ uuid=`echo "${line}" | cut -f7 -d':'`
+
+ if [ "${used}" = "use" ] ; then
+ if [ "${mpoint}" = "/" ] ; then
+ dump=1 ; pass=1
+ elif [ "${mpoint}" = "/home" ] ; then
+ dump=1 ; pass=2
+ elif [ "${fstype}" = "vfat" -a "${mpoint}" = "/boot/efi" ] ; then
+ dump=1 ; pass=0
+ elif [ "${mpoint}" = "swap" ] ; then
+ dump=0 ; pass=0
+ else
+ dump=1 ; pass=2
+ fi
+ printf "%-42s %-16s %-11s %-36s %-6s %s\n" "UUID=${uuid}" "${mpoint}" "${fstype}" "defaults" "${dump}" "${pass}" >> ${fstab}
+ fi
+ done
+ echo "" >> ${fstab}
+ printf "%-42s %-16s %-11s %-36s %-6s %s\n" "devpts" "/dev/pts" "devpts" "gid=5,mode=620" "0" "0" >> ${fstab}
+ printf "%-42s %-16s %-11s %-36s %-6s %s\n" "proc" "/proc" "proc" "defaults" "0" "0" >> ${fstab}
+ printf "%-42s %-16s %-11s %-36s %-6s %s\n" "tmpfs" "/dev/shm" "tmpfs" "nosuid,nodev,noexec" "0" "0" >> ${fstab}
+
+ cat >> ${fstab} << EOF
+
+# ----------------------------------------+----------------+-----------+------------------------------------+------+------
+EOF
+}
+
+prepare_partuuid_etc_fstab() {
+ if [ "${partition_table_type}" = "g" ] ; then
+ local dlen=46
+ cat > $fstab << EOF
+#
+# /etc/fstab
+#
+# --------------------------------------------+----------------+-----------+------------------------------------+------+------
+# device | mount point | FS type | options | dump | pass
+# --------------------------------------------+----------------+-----------+------------------------------------+------+------
+
+EOF
+ else
+ local dlen=21
+ cat > $fstab << EOF
+#
+# /etc/fstab
+#
+# -------------------+----------------+-----------+------------------------------------+------+------
+# device | mount point | FS type | options | dump | pass
+# -------------------+----------------+-----------+------------------------------------+------+------
+
+EOF
+ fi
+
+ cat "${partlist}" | while read -r line ; do
+ pname= ; fstype= ; mpoint= ; dump= ; pass=
+
+ pname=`echo "${line}" | cut -f1 -d':'`
+ fstype=`echo "${line}" | cut -f3 -d':'`
+ mpoint=`echo "${line}" | cut -f4 -d':'`
+ used=`echo "${line}" | cut -f5 -d':'`
+ puuid=`echo "${line}" | cut -f6 -d':'`
+
+ if [ "${used}" = "use" ] ; then
+ if [ "${mpoint}" = "/" ] ; then
+ dump=1 ; pass=1
+ elif [ "${mpoint}" = "/home" ] ; then
+ dump=1 ; pass=2
+ elif [ "${fstype}" = "vfat" -a "${mpoint}" = "/boot/efi" ] ; then
+ dump=1 ; pass=0
+ elif [ "${mpoint}" = "swap" ] ; then
+ dump=0 ; pass=0
+ else
+ dump=1 ; pass=2
+ fi
+ printf "%-${dlen}s %-16s %-11s %-36s %-6s %s\n" "PARTUUID=${puuid}" "${mpoint}" "${fstype}" "defaults" "${dump}" "${pass}" >> ${fstab}
+ fi
+ done
+ echo "" >> ${fstab}
+ printf "%-${dlen}s %-16s %-11s %-36s %-6s %s\n" "devpts" "/dev/pts" "devpts" "gid=5,mode=620" "0" "0" >> ${fstab}
+ printf "%-${dlen}s %-16s %-11s %-36s %-6s %s\n" "proc" "/proc" "proc" "defaults" "0" "0" >> ${fstab}
+ printf "%-${dlen}s %-16s %-11s %-36s %-6s %s\n" "tmpfs" "/dev/shm" "tmpfs" "nosuid,nodev,noexec" "0" "0" >> ${fstab}
+
+ if [ "${partition_table_type}" = "g" ] ; then
+ cat >> ${fstab} << EOF
+
+# --------------------------------------------+----------------+-----------+------------------------------------+------+------
+EOF
+ else
+ cat >> ${fstab} << EOF
+
+# -------------------+----------------+-----------+------------------------------------+------+------
+EOF
+ fi
+}
+#
+# End of prepare /etc/fstab functions.
+#
+####################################################################
+
+####################################################################
+#
+# prepare /boot/grub/grub.cfg - create temporary
+# /boot/grub/grub.cfg according to
+# the table of formated partitions.
+#
+grub_cfg=$TMP/grub.cfg.$$
+grub_load_cfg=$TMP/grub.load.cfg.$$
+grub_core_img=$TMP/grub.core.img.$$
+
+prepare_grub_config()
+{
+ local root_uuid=`cat "${partlist}" | grep ':/:' | cut -f7 -d':'`
+ local root_partuuid=`cat "${partlist}" | grep ':/:' | cut -f6 -d':'`
+
+ cat > ${grub_cfg} << EOF
+
+set menu_color_normal=black/light-gray
+set menu_color_highlight=white/light-gray
+set background_color=black
+
+set timeout=5
+
+EOF
+
+ if [ "${hardware}" = "baikal-m1" ] ; then
+ cat >> ${grub_cfg} << EOF
+font '/boot/grub/fonts/dejavusansmono.pf2'
+EOF
+ fi
+
+ cat >> ${grub_cfg} << EOF
+loadfont dejavusansmono
+
+menuentry 'Radix cross Linux' {
+ set root_uuid=${root_uuid}
+ set part_uuid=${root_partuuid}
+
+ insmod gzio
+ insmod xzio
+EOF
+
+ if [ "${hardware}" = "intel-pc32" ] ; then
+ cat >> ${grub_cfg} << EOF
+ insmod part_msdos
+EOF
+ fi
+
+ cat >> ${grub_cfg} << EOF
+ insmod part_gpt
+ insmod ext2
+
+ search --set=root --fs-uuid \$root_uuid
+EOF
+
+ if [ "${hardware}" = "ebox-3350dx2" -o \
+ "${hardware}" = "intel-pc32" -o \
+ "${hardware}" = "intel-pc64" ] ; then
+ cat >> ${grub_cfg} << EOF
+ linux (\$root)/boot/vmlinuz root=PARTUUID=\$part_uuid ro rootwait console=tty0
+EOF
+ fi
+
+ if [ "${hardware}" = "baikal-m1" ] ; then
+ cat >> ${grub_cfg} << EOF
+ linux (\$root)/boot/Image root=PARTUUID=\$part_uuid ro rootwait console=tty1 earlyprintk=uart8250-32bit,0x20230000,115200
+EOF
+ fi
+
+ cat >> ${grub_cfg} << EOF
+}
+EOF
+}
+
+prepare_grub_load_config()
+{
+ local root_uuid=`cat "${partlist}" | grep ':/:' | cut -f7 -d':'`
+
+ cat > ${grub_load_cfg} << EOF
+
+set color_normal=black/black
+
+set pager=1
+search.fs_uuid ${root_uuid} root
+set prefix=(\$root)/boot/grub
+
+set color_normal=light-gray/black
+clear
+EOF
+}
+#
+# End of prepare /boot/grub/grub.cfg functions.
+#
+####################################################################
+
+####################################################################
+#
+# Install packages:
+#
+errlist=$TMP/errlist.$$
+
+ROOT=
+ROOT_MPOINT=
+
+install_packages()
+{
+ ROOT=`get_rootfs_devname`
+ ROOT_MPOINT=$MNT/root
+
+ if [ "x${ROOT}" = "x" ] ; then
+ fatal_error_dialog "Cannot mount ROOT partition. Exit ${program}."
+ push_log "ERROR: Cannot mount ROOT partition"
+ push_log "Aborted due to an error"
+ push_err "ERROR: Cannot mount ROOT partition"
+ EXITSTATUS=21
+ exit
+ fi
+
+ if `mount | grep -q ${ROOT}` ; then
+ umount ${ROOT}
+ fi
+ mkdir -p ${ROOT_MPOINT}
+ if [ "x`mount | grep ${ROOT_MPOINT}`" != "x" ] ; then
+ umount ${ROOT_MPOINT}
+ fi
+ mount ${ROOT} ${ROOT_MPOINT}
+
+ TMP=/tmp install-pkglist --errlist --info-dialog --priority all --root=${ROOT_MPOINT}/ ${repo} 2>${errlist}
+
+ mkdir -p ${ROOT_MPOINT}/etc
+ cat ${fstab} > ${ROOT_MPOINT}/etc/fstab
+
+ if [ "${hardware}" = "baikal-m1" -o \
+ "${hardware}" = "ebox-3350dx2" -o \
+ "${hardware}" = "intel-pc32" -o \
+ "${hardware}" = "intel-pc64" ] ; then
+ mkdir -p ${ROOT_MPOINT}/boot/grub
+ cat ${grub_cfg} > ${ROOT_MPOINT}/boot/grub/grub.cfg
+ fi
+}
+#
+# End of install packages:
+#
+####################################################################
+
+####################################################################
+#
+# Install GRUB:
+#
+UEFI=
+UEFI_MPOINT=
+
+install_baikal_m1_grub()
+{
+ UEFI=`get_uefi_devname`
+ UEFI_MPOINT=$MNT/UEFI
+
+ if [ "x${UEFI}" = "x" ] ; then
+ fatal_error_dialog "Cannot mount EFI partition. Exit ${program}."
+ push_log "ERROR: Cannot mount EFI partition"
+ push_log "Aborted due to an error"
+ push_err "ERROR: Cannot mount EFI partition"
+ EXITSTATUS=22
+ exit
+ fi
+
+ if `mount | grep -q ${UEFI}` ; then
+ umount ${UEFI}
+ fi
+ mkdir -p ${UEFI_MPOINT}
+ if [ "x`mount | grep ${UEFI_MPOINT}`" != "x" ] ; then
+ umount ${UEFI_MPOINT}
+ fi
+ mount ${UEFI} ${UEFI_MPOINT}
+
+ local grub_modules="all_video archelp bfs bitmap bitmap_scale blocklist boot btrfs"
+ grub_modules="${grub_modules} cat chain configfile cpio date datehook datetime disk diskfilter"
+ grub_modules="${grub_modules} echo efi_gop efifwsetup efinet elf eval exfat ext2 extcmd f2fs fat"
+ grub_modules="${grub_modules} fdt file font fshelp gettext gfxmenu gfxterm gfxterm_background"
+ grub_modules="${grub_modules} gfxterm_menu gptsync gzio halt hashsum help hexdump iso9660 jpeg"
+ grub_modules="${grub_modules} json keystatus linux loadenv loopback ls lsefi lzopio mdraid1x"
+ grub_modules="${grub_modules} memdisk minicmd msdospart net newc normal part_gpt part_msdos"
+ grub_modules="${grub_modules} png probe procfs read reboot regexp reiserfs search search_fs_file"
+ grub_modules="${grub_modules} search_fs_uuid search_label serial squash4 tar terminal terminfo"
+ grub_modules="${grub_modules} test tftp time tr trig true udf ufs1 ufs2 video video_colors"
+ grub_modules="${grub_modules} video_fb videoinfo xzio zstd"
+
+ /usr/sbin/grub-install --skip-fs-probe \
+ --fonts=dejavusansmono \
+ --boot-directory=${ROOT_MPOINT}/boot \
+ --directory=/usr/lib/grub/arm64-efi \
+ --target=arm64-efi --no-efi \
+ --no-bootsector --no-nvram 2>/dev/null 1>/dev/null
+
+ mkdir -p ${ROOT_MPOINT}/boot/efi
+ mkdir -p ${ROOT_MPOINT}/boot/grub/arm64-efi
+ cat ${grub_load_cfg} > ${ROOT_MPOINT}/boot/grub/arm64-efi/load.cfg
+
+ mkdir -p ${UEFI_MPOINT}/efi/boot
+ /usr/bin/grub-mkimage --format=arm64-efi \
+ --directory=/usr/lib/grub/arm64-efi \
+ --compression=xz \
+ --prefix=/efi/boot \
+ --config="${grub_load_cfg}" \
+ --output=${UEFI_MPOINT}/efi/boot/bootaa64.efi \
+ ${grub_modules} 2>/dev/null 1>/dev/null
+}
+
+install_intel_pc64_grub()
+{
+ UEFI=`get_uefi_devname`
+ UEFI_MPOINT=$MNT/UEFI
+
+ if [ "x${UEFI}" = "x" ] ; then
+ fatal_error_dialog "Cannot mount EFI partition. Exit ${program}."
+ push_log "ERROR: Cannot mount EFI partition"
+ push_log "Aborted due to an error"
+ push_err "ERROR: Cannot mount EFI partition"
+ EXITSTATUS=22
+ exit
+ fi
+
+ if `mount | grep -q ${UEFI}` ; then
+ umount ${UEFI}
+ fi
+ mkdir -p ${UEFI_MPOINT}
+ if [ "x`mount | grep ${UEFI_MPOINT}`" != "x" ] ; then
+ umount ${UEFI_MPOINT}
+ fi
+ mount ${UEFI} ${UEFI_MPOINT}
+
+ local grub_modules="part_gpt part_msdos fat f2fs ext2 hfs hfsplus iso9660 udf ufs1 ufs2 chain linux"
+ grub_modules="${grub_modules} boot appleldr configfile normal regexp minicmd reboot halt search search_fs_file"
+ grub_modules="${grub_modules} search_fs_uuid search_label gfxterm gfxmenu efi_gop efi_uga all_video loadbios"
+ grub_modules="${grub_modules} gzio echo true probe loadenv bitmap_scale font cat help ls png jpeg tga test"
+ grub_modules="${grub_modules} at_keyboard usb_keyboard zstd"
+
+ /usr/sbin/grub-install --skip-fs-probe \
+ --fonts=dejavusansmono \
+ --boot-directory=${ROOT_MPOINT}/boot \
+ --directory=/usr/lib/grub/x86_64-efi \
+ --target=x86_64-efi --no-efi \
+ --no-bootsector --no-nvram 2>/dev/null 1>/dev/null
+
+ mkdir -p ${ROOT_MPOINT}/boot/efi
+ mkdir -p ${ROOT_MPOINT}/boot/grub/x86_64-efi
+ cat ${grub_load_cfg} > ${ROOT_MPOINT}/boot/grub/x86_64-efi/load.cfg
+
+ mkdir -p ${UEFI_MPOINT}/efi/boot
+ /usr/bin/grub-mkimage --format=x86_64-efi \
+ --directory=/usr/lib/grub/x86_64-efi \
+ --compression=xz \
+ --prefix=/efi/boot \
+ --config="${grub_load_cfg}" \
+ --output=${UEFI_MPOINT}/efi/boot/bootx64.efi \
+ ${grub_modules} 2>/dev/null 1>/dev/null
+}
+
+install_intel_pc32_grub()
+{
+ local disk=${1}
+
+ local grub_modules="part_gpt part_msdos fat f2fs ext2 hfs hfsplus iso9660 udf ufs1 ufs2 chain linux"
+ grub_modules="${grub_modules} boot biosdisk configfile normal regexp minicmd reboot halt search search_fs_file"
+ grub_modules="${grub_modules} search_fs_uuid search_label gfxterm gfxmenu all_video gzio echo true probe loadenv"
+ grub_modules="${grub_modules} bitmap_scale font cat help ls png jpeg tga test at_keyboard usb_keyboard zstd"
+
+ /usr/sbin/grub-install --skip-fs-probe \
+ --fonts=dejavusansmono \
+ --boot-directory=${ROOT_MPOINT}/boot \
+ --directory=/usr/lib/grub/i386-pc \
+ --target=i386-pc \
+ --modules="${grub_modules}" \
+ --disk-module=biosdisk \
+ ${disk} 2>/dev/null 1>/dev/null
+
+ mkdir -p ${ROOT_MPOINT}/boot/grub/i386-pc
+ cat ${grub_load_cfg} > ${ROOT_MPOINT}/boot/grub/i386-pc/load.cfg
+
+ /usr/bin/grub-mkimage --format=i386-pc \
+ --directory=/usr/lib/grub/i386-pc \
+ --prefix=/boot/grub \
+ --config="${grub_load_cfg}" \
+ --output=${grub_core_img} \
+ ${grub_modules} 2>/dev/null 1>/dev/null
+
+ dd if=${grub_core_img} of=${disk} obs=512 seek=1 conv=notrunc 2>/dev/null 1>/dev/null
+}
+
+install_ebox_3350dx2_grub()
+{
+ local disk=${1}
+
+ local grub_modules="part_gpt part_msdos fat f2fs ext2 hfs hfsplus iso9660 udf ufs1 ufs2 chain linux"
+ grub_modules="${grub_modules} boot biosdisk configfile normal regexp minicmd reboot halt search search_fs_file"
+ grub_modules="${grub_modules} search_fs_uuid search_label gfxterm gfxmenu all_video gzio echo true probe loadenv"
+ grub_modules="${grub_modules} bitmap_scale font cat help ls png jpeg tga test at_keyboard usb_keyboard zstd"
+
+ /usr/sbin/grub-install --skip-fs-probe \
+ --fonts=dejavusansmono \
+ --boot-directory=${ROOT_MPOINT}/boot \
+ --directory=/usr/lib/grub/i386-pc \
+ --target=i386-pc \
+ --modules="${grub_modules}" \
+ --disk-module=biosdisk \
+ ${disk} 2>/dev/null 1>/dev/null
+
+ mkdir -p ${ROOT_MPOINT}/boot/grub/i386-pc
+ cat ${grub_load_cfg} > ${ROOT_MPOINT}/boot/grub/i386-pc/load.cfg
+
+ /usr/bin/grub-mkimage --format=i386-pc \
+ --directory=/usr/lib/grub/i386-pc \
+ --prefix=/boot/grub \
+ --config="${grub_load_cfg}" \
+ --output=${grub_core_img} \
+ ${grub_modules} 2>/dev/null 1>/dev/null
+
+ dd if=${grub_core_img} of=${disk} obs=512 seek=1 conv=notrunc 2>/dev/null 1>/dev/null
+}
+#
+# End of install GRUB:
+#
+####################################################################
+
+####################################################################
+#
+# Install U-Boot:
+#
+install_leez_p710_uboot()
+{
+ local disk=${1}
+
+ dd if=${ROOT_MPOINT}/boot/u-boot/idbloader.img of=${disk} bs=512 seek=64 2>/dev/null 2>/dev/null
+ dd if=${ROOT_MPOINT}/boot/u-boot/u-boot.itb of=${disk} bs=512 seek=16384 2>/dev/null 2>/dev/null
+
+ ln -sfr ${ROOT_MPOINT}/boot/boot.emmc.scr ${ROOT_MPOINT}/boot/boot.scr
+}
+#
+# End of install U-Boot:
+#
+####################################################################
+
+
+#
+# Parse Options:
+#
+while [ 0 ]; do
+ if [ "$1" = "-h" -o "$1" = "--help" ] ; then
+ usage
+ exit
+ elif [ "$1" = "-r" -o "$1" = "--root-dev" ]; then
+ if [ "$2" = "" ]; then
+ usage
+ push_log "ERROR: Target DEVICE has not specified by --root-dev option"
+ push_log "Aborted due to an error"
+ push_err "ERROR: Target DEVICE has not specified by --root-dev option"
+ EXITSTATUS=16
+ exit
+ fi
+ device="`echo $2 | sed 's,/$,,'`"
+ shift 2
+ elif [ "$1" = "--repo" ]; then
+ if [ "$2" = "" ]; then
+ usage
+ push_log "ERROR: Custom REPO directory has not specified by --repo option"
+ push_err "ERROR: Custom REPO directory has not specified by --repo option"
+ EXITSTATUS=18
+ exit
+ fi
+ custom_repo="$2"
+ if ! `echo ${custom_repo: -1} | grep -q '/'` ; then
+ custom_repo="${custom_repo}/"
+ fi
+ shift 2
+ else
+ break
+ fi
+done
+
+if [ "x${custom_repo}" != "xno" ] ; then
+ check_custom_repo "${custom_repo}"
+else
+ check_repo "${repo}"
+ ret=$?
+ if [ $ret -ne 0 ] ; then
+ fatal_error_dialog "Source REPO directory is invalid. Exit ${program}."
+ push_log "ERROR: Source REPO directory is invalid"
+ push_log "Aborted due to an error"
+ push_err "ERROR: Source REPO directory is invalid"
+ EXITSTATUS=17
+ exit
+ fi
+fi
+
+#
+# Show DISTRO spec:
+# ----------------
+#
+if [ "x${custom_repo}" != "xyes" ] ; then
+ welcome_setup
+else
+ welcome_custom_setup
+fi
+
+check_current_device
+check_target_device
+
+#
+# Ask for format target device:
+# ----------------------------
+#
+ask_formatting "${device}"
+blockdev -q --rereadpt "${device}"
+
+#
+# File Systems:
+# ------------
+#
+check_partitions "${device}"
+partitions_loop "${device}"
+$DIALOG --colors \
+ --backtitle "\Z7Radix\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0Install Packages\Zn " \
+ --infobox "\n Please wait for packages installation.\n\n" 5 74
+check_filesystems
+
+#
+# /etc/fstab:
+# ----------
+#
+if [ "${hardware}" = "baikal-m1" -o \
+ "${hardware}" = "intel-pc64" ] ; then
+ prepare_partuuid_etc_fstab
+else
+ prepare_uuid_etc_fstab
+ #prepare_dev_etc_fstab
+fi
+
+#
+# /boot/grub/grub.cfg:
+# -------------------
+#
+if [ "${hardware}" = "baikal-m1" -o \
+ "${hardware}" = "ebox-3350dx2" -o \
+ "${hardware}" = "intel-pc32" -o \
+ "${hardware}" = "intel-pc64" ] ; then
+ prepare_grub_config
+ prepare_grub_load_config
+fi
+
+#
+# Install all packages:
+# --------------------
+#
+install_packages
+
+#
+# Install GRUB:
+# ------------
+#
+if [ "${hardware}" = "baikal-m1" ] ; then
+ install_baikal_m1_grub
+fi
+if [ "${hardware}" = "intel-pc64" ] ; then
+ install_intel_pc64_grub
+fi
+if [ "${hardware}" = "intel-pc32" ] ; then
+ install_intel_pc32_grub "${device}"
+fi
+if [ "${hardware}" = "ebox-3350dx2" ] ; then
+ install_ebox_3350dx2_grub "${device}"
+fi
+
+#
+# Install GRUB:
+# ------------
+#
+if [ "${hardware}" = "leez-p710" ] ; then
+ install_leez_p710_uboot "${device}"
+fi
+
+#
+# post-install settings:
+#
+if [ -x ${ROOT_MPOINT}/usr/sbin/timeconfig ] ; then
+ ${ROOT_MPOINT}/usr/sbin/timeconfig --root ${ROOT_MPOINT}
+fi
+
+$DIALOG --colors --clear \
+ --backtitle "\Z7Radix\Zn \Z1cross\Zn\Z7 Linux\Zn" \
+ --title " \Z0System Installation is Complete\Zn " \
+ --msgbox "\nSetup is complete. Please set \Z1root\Zn password at first login.\n" 7 74
+
+exit
Radix cross Linux
The main Radix cross Linux repository contains the build scripts of packages, which have the most complete and common functionality for desktop machines
452 Commits
2 Branches
1 Tag