Index: create.patch.sh
===================================================================
--- create.patch.sh (nonexistent)
+++ create.patch.sh (revision 5)
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+VERSION=2.17
+
+tar --files-from=file.list -xzvf ../setserial-$VERSION.tar.gz
+mv setserial-$VERSION setserial-$VERSION-orig
+
+cp -rf ./setserial-$VERSION-new ./setserial-$VERSION
+
+diff --unified -Nr setserial-$VERSION-orig setserial-$VERSION > setserial-$VERSION.patch
+
+mv setserial-$VERSION.patch ../patches
+
+rm -rf ./setserial-$VERSION
+rm -rf ./setserial-$VERSION-orig
Property changes on: create.patch.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: file.list
===================================================================
--- file.list (nonexistent)
+++ file.list (revision 5)
@@ -0,0 +1,2 @@
+setserial-2.17/rc.serial
+setserial-2.17/setserial.c
Index: setserial-2.17-new/rc.serial
===================================================================
--- setserial-2.17-new/rc.serial (nonexistent)
+++ setserial-2.17-new/rc.serial (revision 5)
@@ -0,0 +1,132 @@
+#
+# /etc/rc.serial
+# Initializes the serial ports on your system
+#
+# chkconfig: 2345 50 75
+# description: This initializes the settings of the serial port
+#
+# FILE_VERSION: 19981128
+#
+# Distributed with setserial and the serial driver. We need to use the
+# FILE_VERSION field to assure that we don't overwrite a newer rc.serial
+# file with a newer one.
+#
+# XXXX For now, the autosave feature doesn't work if you are
+# using the multiport feature; it doesn't save the multiport configuration
+# (for now). Autosave also doesn't work for the hayes devices.
+#
+
+RCLOCKFILE=/var/lock/subsys/serial
+DIRS="/lib/modules/`uname -r`/misc /lib/modules /usr/lib/modules ."
+PATH=/bin:/sbin:/usr/bin
+DRIVER=serial
+DRIVER_NAME=serial
+MODULE_REGEXP="serial\b"
+
+ALLDEVS="/dev/ttyS?"
+if /bin/ls /dev/ttyS?? >& /dev/null ; then
+ ALLDEVS="$ALLDEVS /dev/ttyS??"
+fi
+
+SETSERIAL=""
+if test -x /bin/setserial ; then
+ SETSERIAL=/bin/setserial
+elif test -x /sbin/setserial ; then
+ SETSERIAL=/sbin/setserial
+fi
+
+#
+# See if the serial driver is loaded
+#
+LOADED=""
+if test -f /proc/devices; then
+ if grep -q " ttyS$" /proc/devices ; then
+ LOADED="yes"
+ else
+ LOADED="no"
+ fi
+fi
+
+#
+# Find the serial driver
+#
+for i in $DIRS
+do
+ if test -z "$MODULE" -a -f $i/$DRIVER.o ; then
+ MODULE=$i/$DRIVER.o
+ fi
+done
+
+if ! test -f /proc/modules ; then
+ MODULE=""
+fi
+
+#
+# Handle System V init conventions...
+#
+case $1 in
+start)
+ action="start";
+ ;;
+stop)
+ action="stop";
+ ;;
+*)
+ action="start";
+esac
+
+if test $action = stop ; then
+ if test -n ${SETSERIAL} -a "$LOADED" != "no" -a \
+ `head -1 /etc/serial.conf`X = "###AUTOSAVE###X" ; then
+ echo -n "Saving state of serial devices... "
+ grep "^#" /etc/serial.conf > /etc/.serial.conf.new
+ ${SETSERIAL} -G -g ${ALLDEVS} >> /etc/.serial.conf.new
+ mv /etc/serial.conf /etc/.serial.conf.old
+ mv /etc/.serial.conf.new /etc/serial.conf
+ echo "done."
+ fi
+ if test -n "$MODULE" ; then
+ module=`grep $MODULE_REGEXP /proc/modules | awk '{print $1}'`
+ if test -z "$module" ; then
+ echo "The $DRIVER_NAME driver is not loaded."
+ rm -f ${RCLOCKFILE}
+ exit 0
+ fi
+ if rmmod $module ; then :; else
+ echo "The $DRIVER_NAME driver could NOT be unloaded."
+ exit 1;
+ fi
+ echo "The $DRIVER_NAME driver has been unloaded."
+ fi
+ rm -f ${RCLOCKFILE}
+ exit 0
+fi
+
+#
+# If not stop, it must be a start....
+#
+
+if test -n "$MODULE" -a "$LOADED" != "yes" ; then
+ if insmod -f $MODULE $DRIVER_ARG ; then
+ true
+ else
+ echo "Couldn't load $DRIVER_NAME driver."
+ exit 1
+ fi
+fi
+
+if test -f /etc/serial.conf ; then
+ if test -n ${SETSERIAL} ; then
+ grep -v ^# < /etc/serial.conf | while read device args
+ do
+ if [ ! "$device" = "" -a ! "$args" = "" ]; then
+ ${SETSERIAL} -z $device $args
+ fi
+ done
+ fi
+else
+ echo "###AUTOSAVE###" > /etc/serial.conf
+fi
+
+touch ${RCLOCKFILE}
+${SETSERIAL} -bg ${ALLDEVS}
Property changes on: setserial-2.17-new/rc.serial
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: setserial-2.17-new/setserial.c
===================================================================
--- setserial-2.17-new/setserial.c (nonexistent)
+++ setserial-2.17-new/setserial.c (revision 5)
@@ -0,0 +1,789 @@
+/* setserial.c - get/set Linux serial port info - rick sladkey */
+/* modified to do work again and added setting fast serial speeds,
+ Michael K. Johnson, johnsonm@stolaf.edu */
+/*
+ * Very heavily modified --- almost rewritten from scratch --- to have
+ * a more flexible command structure. Now able to set any of the
+ * serial-specific options using the TIOCSSERIAL ioctl().
+ * Theodore Ts'o, tytso@mit.edu, 1/1/93
+ *
+ * Last modified: [tytso:19940520.0036EDT]
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#include <termios.h>
+#include <string.h>
+#include <errno.h>
+
+#include <unistd.h>
+#include <sys/ioctl.h>
+
+#ifdef HAVE_ASM_IOCTLS_H
+#include <asm/ioctls.h>
+#endif
+#ifdef HAVE_LINUX_HAYESESP_H
+#include <linux/hayesesp.h>
+#endif
+#include <linux/serial.h>
+
+#include "version.h"
+
+/*
+ http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git
+ a=commitdiff
+ h=f53a2ade0bb9f2a81f473e6469155172a96b7c38
+ */
+#undef TIOCGHAYESESP
+
+static char version_str[] = "setserial version " SETSERIAL_VERSION ", "
+ SETSERIAL_DATE;
+
+char *progname;
+
+int verbosity = 1; /* 1 = normal, 0=boot-time, 2=everything */
+ /* -1 == arguments to setserial */
+int verbose_flag = 0; /* print results after setting a port */
+int quiet_flag = 0;
+int zero_flag = 0;
+
+struct serial_type_struct {
+ int id;
+ char *name;
+} serial_type_tbl[] = {
+ PORT_UNKNOWN, "unknown",
+ PORT_8250, "8250",
+ PORT_16450, "16450",
+ PORT_16550, "16550",
+ PORT_16550A, "16550A",
+ PORT_CIRRUS, "Cirrus",
+ PORT_16650, "16650",
+ PORT_16650V2, "16650V2",
+ PORT_16750, "16750",
+ PORT_16C950, "16950/954",
+ PORT_16C950, "16950",
+ PORT_16C950, "16954",
+ PORT_16654, "16654",
+ PORT_16850, "16850",
+ PORT_UNKNOWN, "none",
+ -1, NULL
+};
+
+#define CMD_FLAG 1
+#define CMD_PORT 2
+#define CMD_IRQ 3
+#define CMD_DIVISOR 4
+#define CMD_TYPE 5
+#define CMD_BASE 6
+#define CMD_DELAY 7
+#define CMD_WAIT 8
+#define CMD_WAIT2 9
+#define CMD_CONFIG 10
+#define CMD_GETMULTI 11
+#define CMD_SETMULTI 12
+#define CMD_RX_TRIG 13
+#define CMD_TX_TRIG 14
+#define CMD_FLOW_OFF 15
+#define CMD_FLOW_ON 16
+#define CMD_RX_TMOUT 17
+#define CMD_DMA_CHAN 18
+
+#define FLAG_CAN_INVERT 0x0001
+#define FLAG_NEED_ARG 0x0002
+
+struct flag_type_table {
+ int cmd;
+ char *name;
+ int bits;
+ int mask;
+ int level;
+ int flags;
+} flag_type_tbl[] = {
+ CMD_FLAG, "spd_normal", 0, ASYNC_SPD_MASK, 2, 0,
+ CMD_FLAG, "spd_hi", ASYNC_SPD_HI, ASYNC_SPD_MASK, 0, 0,
+ CMD_FLAG, "spd_vhi", ASYNC_SPD_VHI, ASYNC_SPD_MASK, 0, 0,
+ CMD_FLAG, "spd_shi", ASYNC_SPD_SHI, ASYNC_SPD_MASK, 0, 0,
+ CMD_FLAG, "spd_warp", ASYNC_SPD_WARP, ASYNC_SPD_MASK, 0, 0,
+ CMD_FLAG, "spd_cust", ASYNC_SPD_CUST, ASYNC_SPD_MASK, 0, 0,
+
+ CMD_FLAG, "SAK", ASYNC_SAK, ASYNC_SAK, 0, FLAG_CAN_INVERT,
+ CMD_FLAG, "Fourport", ASYNC_FOURPORT, ASYNC_FOURPORT, 0, FLAG_CAN_INVERT,
+ CMD_FLAG, "hup_notify", ASYNC_HUP_NOTIFY, ASYNC_HUP_NOTIFY, 0, FLAG_CAN_INVERT,
+ CMD_FLAG, "skip_test", ASYNC_SKIP_TEST,ASYNC_SKIP_TEST,2, FLAG_CAN_INVERT,
+ CMD_FLAG, "auto_irq", ASYNC_AUTO_IRQ, ASYNC_AUTO_IRQ, 2, FLAG_CAN_INVERT,
+ CMD_FLAG, "split_termios", ASYNC_SPLIT_TERMIOS, ASYNC_SPLIT_TERMIOS, 2, FLAG_CAN_INVERT,
+ CMD_FLAG, "session_lockout", ASYNC_SESSION_LOCKOUT, ASYNC_SESSION_LOCKOUT, 2, FLAG_CAN_INVERT,
+ CMD_FLAG, "pgrp_lockout", ASYNC_PGRP_LOCKOUT, ASYNC_PGRP_LOCKOUT, 2, FLAG_CAN_INVERT,
+ CMD_FLAG, "callout_nohup", ASYNC_CALLOUT_NOHUP, ASYNC_CALLOUT_NOHUP, 2, FLAG_CAN_INVERT,
+ CMD_FLAG, "low_latency", ASYNC_LOW_LATENCY, ASYNC_LOW_LATENCY, 0, FLAG_CAN_INVERT,
+ CMD_PORT, "port", 0, 0, 0, FLAG_NEED_ARG,
+ CMD_IRQ, "irq", 0, 0, 0, FLAG_NEED_ARG,
+ CMD_DIVISOR, "divisor", 0, 0, 0, FLAG_NEED_ARG,
+ CMD_TYPE, "uart", 0, 0, 0, FLAG_NEED_ARG,
+ CMD_BASE, "base", 0, 0, 0, FLAG_NEED_ARG,
+ CMD_BASE, "baud_base", 0, 0, 0, FLAG_NEED_ARG,
+ CMD_DELAY, "close_delay", 0, 0, 0, FLAG_NEED_ARG,
+ CMD_WAIT, "closing_wait", 0, 0, 0, FLAG_NEED_ARG,
+ CMD_CONFIG, "autoconfig", 0, 0, 0, 0,
+ CMD_CONFIG, "autoconfigure",0, 0, 0, 0,
+ CMD_GETMULTI, "get_multiport",0, 0, 0, 0,
+ CMD_SETMULTI, "set_multiport",0, 0, 0, 0,
+#ifdef TIOCGHAYESESP
+ CMD_RX_TRIG, "rx_trigger", 0, 0, 0, FLAG_NEED_ARG,
+ CMD_TX_TRIG, "tx_trigger", 0, 0, 0, FLAG_NEED_ARG,
+ CMD_FLOW_OFF, "flow_off", 0, 0, 0, FLAG_NEED_ARG,
+ CMD_FLOW_ON, "flow_on", 0, 0, 0, FLAG_NEED_ARG,
+ CMD_RX_TMOUT, "rx_timeout", 0, 0, 0, FLAG_NEED_ARG,
+ CMD_DMA_CHAN, "dma_channel", 0, 0, 0, FLAG_NEED_ARG,
+#endif
+ 0, 0, 0, 0, 0, 0,
+};
+
+char *serial_type(int id)
+{
+ int i;
+
+ for (i = 0; serial_type_tbl[i].id != -1; i++)
+ if (id == serial_type_tbl[i].id)
+ return serial_type_tbl[i].name;
+ return "undefined";
+}
+
+int uart_type(char *name)
+{
+ int i;
+
+ for (i = 0; serial_type_tbl[i].id != -1; i++)
+ if (!strcasecmp(name, serial_type_tbl[i].name))
+ return serial_type_tbl[i].id;
+ return -1;
+}
+
+
+int atonum(char *s)
+{
+ int n;
+
+ while (*s == ' ')
+ s++;
+ if (strncmp(s, "0x", 2) == 0 || strncmp(s, "0X", 2) == 0)
+ sscanf(s + 2, "%x", &n);
+ else if (s[0] == '0' && s[1])
+ sscanf(s + 1, "%o", &n);
+ else
+ sscanf(s, "%d", &n);
+ return n;
+}
+
+void print_flags(struct serial_struct *serinfo,
+ char *prefix, char *postfix)
+{
+ struct flag_type_table *p;
+ int flags;
+ int first = 1;
+
+ flags = serinfo->flags;
+
+ for (p = flag_type_tbl; p->name; p++) {
+ if (p->cmd != CMD_FLAG)
+ continue;
+ if (verbosity == -1) {
+ if ((flags & p->mask) == p->bits)
+ printf(" %s", p->name);
+ continue;
+ }
+ if (verbosity < p->level)
+ continue;
+ if ((flags & p->mask) == p->bits) {
+ if (first) {
+ printf("%s", prefix);
+ first = 0;
+ } else
+ printf(" ");
+ printf("%s", p->name);
+ }
+ }
+
+ if (!first)
+ printf("%s", postfix);
+}
+
+#ifdef TIOCSERGETMULTI
+void print_multiport(char *device, int fd)
+{
+ struct serial_multiport_struct multi;
+
+ if (ioctl(fd, TIOCSERGETMULTI, &multi) < 0)
+ return;
+
+ if (!multi.port1 && !multi.port2 &&
+ !multi.port3 && !multi.port4 && !multi.port_monitor)
+ return;
+
+ printf("%s", device);
+ if (multi.port_monitor)
+ printf(" port_monitor 0x%x", multi.port_monitor);
+ if (multi.port1)
+ printf(" port1 0x%x mask1 0x%x match1 0x%x", multi.port1,
+ multi.mask1, multi.match1);
+ if (multi.port2)
+ printf(" port2 0x%x mask2 0x%x match2 0x%x", multi.port2,
+ multi.mask2, multi.match2);
+ if (multi.port3)
+ printf(" port3 0x%x mask3 0x%x match3 0x%x", multi.port3,
+ multi.mask3, multi.match3);
+ if (multi.port4)
+ printf(" port4 0x%x mask4 0x%x match4 0x%x", multi.port4,
+ multi.mask4, multi.match4);
+ printf("\n");
+}
+
+
+void multiport_usage()
+{
+
+ fprintf(stderr, "\nValid keywords after set_multiport are:\n");
+ fprintf(stderr, "\tport_monitor, port[1-4], mask[1-4], "
+ "match[1-4]\n\n");
+ fprintf(stderr, "All arguments take an numeric argument following "
+ "the keyword.\n");
+ fprintf(stderr, "Use a leading '0x' for hex numbers.\n\n");
+}
+
+void get_multiport(char *device, int fd)
+{
+ struct serial_multiport_struct multi;
+
+ if (ioctl(fd, TIOCSERGETMULTI, &multi) < 0) {
+ perror("Cannot get multiport config");
+ exit(1);
+ }
+ printf("Multiport config for irq %d:\n", multi.irq);
+ printf("\tPort monitor = 0x%x\n", multi.port_monitor);
+ printf("\tPort1 = 0x%x, mask=0x%x, match=0x%x\n", multi.port1,
+ multi.mask1, multi.match1);
+ printf("\tPort2 = 0x%x, mask=0x%x, match=0x%x\n", multi.port2,
+ multi.mask2, multi.match2);
+ printf("\tPort3 = 0x%x, mask=0x%x, match=0x%x\n", multi.port3,
+ multi.mask3, multi.match3);
+ printf("\tPort4 = 0x%x, mask=0x%x, match=0x%x\n", multi.port4,
+ multi.mask4, multi.match4);
+}
+
+void set_multiport(char *device, int fd, char ***in_arg)
+{
+ char **arg = *in_arg;
+ char *word, *argument;
+ struct serial_multiport_struct multi;
+
+ if (ioctl(fd, TIOCSERGETMULTI, &multi) < 0) {
+ perror("Cannot get multiport config");
+ exit(1);
+ }
+ if (*arg == 0) {
+ multiport_usage();
+ return;
+ }
+ while (*arg) {
+ word = *arg++;
+ if (*arg == 0) {
+ multiport_usage();
+ exit(1);
+ }
+ argument = *arg++;
+ if (strcasecmp(word, "port_monitor") == 0) {
+ multi.port_monitor = atonum(argument);
+ continue;
+ }
+ if (strcasecmp(word, "port1") == 0) {
+ multi.port1 = atonum(argument);
+ continue;
+ }
+ if (strcasecmp(word, "mask1") == 0) {
+ multi.mask1 = atonum(argument);
+ continue;
+ }
+ if (strcasecmp(word, "match1") == 0) {
+ multi.match1 = atonum(argument);
+ continue;
+ }
+ if (strcasecmp(word, "port2") == 0) {
+ multi.port2 = atonum(argument);
+ continue;
+ }
+ if (strcasecmp(word, "mask2") == 0) {
+ multi.mask2 = atonum(argument);
+ continue;
+ }
+ if (strcasecmp(word, "match2") == 0) {
+ multi.match2 = atonum(argument);
+ continue;
+ }
+ if (strcasecmp(word, "port3") == 0) {
+ multi.port3 = atonum(argument);
+ continue;
+ }
+ if (strcasecmp(word, "mask3") == 0) {
+ multi.mask3 = atonum(argument);
+ continue;
+ }
+ if (strcasecmp(word, "match3") == 0) {
+ multi.match3 = atonum(argument);
+ continue;
+ }
+ if (strcasecmp(word, "port4") == 0) {
+ multi.port4 = atonum(argument);
+ continue;
+ }
+ if (strcasecmp(word, "mask4") == 0) {
+ multi.mask4 = atonum(argument);
+ continue;
+ }
+ if (strcasecmp(word, "match4") == 0) {
+ multi.match4 = atonum(argument);
+ continue;
+ }
+ fprintf(stderr, "Unknown keyword %s.\n", word);
+ multiport_usage();
+ exit(1);
+ }
+ if (ioctl(fd, TIOCSERSETMULTI, &multi) < 0) {
+ perror("Cannot set multiport config");
+ exit(1);
+ }
+ *in_arg = arg;
+}
+#else
+void get_multiport(char *device, int fd)
+{
+ printf("Setserial was compiled under a kernel which did not\n");
+ printf("support the special serial multiport configs.\n");
+}
+void set_multiport(char *device, int fd, char ***in_arg)
+{
+ printf("Setserial was compiled under a kernel which did not\n");
+ printf("support the special serial multiport configs.\n");
+}
+#endif
+
+#ifdef TIOCGHAYESESP
+void print_hayesesp(int fd)
+{
+ struct hayes_esp_config esp;
+
+ if (ioctl(fd, TIOCGHAYESESP, &esp) < 0)
+ return;
+
+ printf("\tHayes ESP enhanced mode configuration:\n");
+ printf("\t\tRX trigger level: %d, TX trigger level: %d\n",
+ (int)esp.rx_trigger, (int)esp.tx_trigger);
+ printf("\t\tFlow off level: %d, Flow on level: %d\n",
+ (int)esp.flow_off, (int)esp.flow_on);
+ printf("\t\tRX timeout: %u, DMA channel: %d\n\n",
+ (unsigned int)esp.rx_timeout, (int)esp.dma_channel);
+}
+
+void set_hayesesp(int fd, int cmd, int arg)
+{
+ struct hayes_esp_config esp;
+
+ if (ioctl(fd, TIOCGHAYESESP, &esp) < 0) {
+ printf("\nError: rx_trigger, tx_trigger, flow_off, "
+ "flow_on, rx_timeout, and dma_channel\n"
+ "are only valid for Hayes ESP ports.\n\n");
+ exit(1);
+ }
+
+ switch (cmd) {
+ case CMD_RX_TRIG:
+ esp.rx_trigger = arg;
+ break;
+ case CMD_TX_TRIG:
+ esp.tx_trigger = arg;
+ break;
+ case CMD_FLOW_OFF:
+ esp.flow_off = arg;
+ break;
+ case CMD_FLOW_ON:
+ esp.flow_on = arg;
+ break;
+ case CMD_RX_TMOUT:
+ esp.rx_timeout = arg;
+ break;
+ case CMD_DMA_CHAN:
+ esp.dma_channel = arg;
+ break;
+ }
+
+ if (ioctl(fd, TIOCSHAYESESP, &esp) < 0) {
+ printf("Cannot set Hayes ESP info\n");
+ exit(1);
+ }
+}
+#endif
+
+void get_serial(char *device)
+{
+ struct serial_struct serinfo;
+ int fd;
+ char buf1[40];
+
+ if ((fd = open(device, O_RDWR|O_NONBLOCK)) < 0) {
+ perror(device);
+ return;
+ }
+ serinfo.reserved_char[0] = 0;
+ if (ioctl(fd, TIOCGSERIAL, &serinfo) < 0) {
+ perror("Cannot get serial info");
+ close(fd);
+ return;
+ }
+ if (serinfo.irq == 9)
+ serinfo.irq = 2; /* People understand 2 better than 9 */
+ if (verbosity==-1) {
+ printf("%s uart %s port 0x%.4x irq %d baud_base %d", device,
+ serial_type(serinfo.type), serinfo.port,
+ serinfo.irq, serinfo.baud_base);
+ print_flags(&serinfo, ", Flags: ", "");
+ printf("\n");
+ } else if (verbosity==2) {
+ printf("%s, Line %d, UART: %s, Port: 0x%.4x, IRQ: %d\n",
+ device, serinfo.line, serial_type(serinfo.type),
+ serinfo.port, serinfo.irq);
+ printf("\tBaud_base: %d, close_delay: %d, divisor: %d\n",
+ serinfo.baud_base, serinfo.close_delay,
+ serinfo.custom_divisor);
+ if (serinfo.closing_wait == ASYNC_CLOSING_WAIT_INF)
+ strcpy(buf1, "infinte");
+ else if (serinfo.closing_wait == ASYNC_CLOSING_WAIT_NONE)
+ strcpy(buf1, "none");
+ else
+ sprintf(buf1, "%d", serinfo.closing_wait);
+ printf("\tclosing_wait: %s\n", buf1);
+ print_flags(&serinfo, "\tFlags: ", "");
+ printf("\n\n");
+
+#ifdef TIOCGHAYESESP
+ print_hayesesp(fd);
+#endif
+ } else if (verbosity==0) {
+ if (serinfo.type) {
+ printf("%s at 0x%.4x (irq = %d) is a %s",
+ device, serinfo.port, serinfo.irq,
+ serial_type(serinfo.type));
+ print_flags(&serinfo, " (", ")");
+ printf("\n");
+ }
+ } else {
+ printf("%s, UART: %s, Port: 0x%.4x, IRQ: %d",
+ device, serial_type(serinfo.type),
+ serinfo.port, serinfo.irq);
+ print_flags(&serinfo, ", Flags: ", "");
+ printf("\n");
+ }
+ close(fd);
+}
+
+void set_serial(char *device, char ** arg)
+{
+ struct serial_struct old_serinfo, new_serinfo;
+ struct flag_type_table *p;
+ int fd;
+ int do_invert = 0;
+ char *word;
+
+
+ if ((fd = open(device, O_RDWR|O_NONBLOCK)) < 0) {
+ if (verbosity==0 && errno==ENOENT)
+ exit(201);
+ perror(device);
+ exit(201);
+ }
+ if (ioctl(fd, TIOCGSERIAL, &old_serinfo) < 0) {
+ perror("Cannot get serial info");
+ exit(1);
+ }
+ new_serinfo = old_serinfo;
+ if (zero_flag)
+ new_serinfo.flags = 0;
+ while (*arg) {
+ do_invert = 0;
+ word = *arg++;
+ if (*word == '^') {
+ do_invert++;
+ word++;
+ }
+ for (p = flag_type_tbl; p->name; p++) {
+ if (!strcasecmp(p->name, word))
+ break;
+ }
+ if (!p->name) {
+ fprintf(stderr, "Invalid flag: %s\n", word);
+ exit(1);
+ }
+ if (do_invert && !(p->flags & FLAG_CAN_INVERT)) {
+ fprintf(stderr, "This flag can not be inverted: %s\n", word);
+ exit(1);
+ }
+ if ((p->flags & FLAG_NEED_ARG) && !*arg) {
+ fprintf(stderr, "Missing argument for %s\n", word);
+ exit(1);
+ }
+ switch (p->cmd) {
+ case CMD_FLAG:
+ new_serinfo.flags &= ~p->mask;
+ if (!do_invert)
+ new_serinfo.flags |= p->bits;
+ break;
+ case CMD_PORT:
+ new_serinfo.port = atonum(*arg++);
+ break;
+ case CMD_IRQ:
+ new_serinfo.irq = atonum(*arg++);
+ break;
+ case CMD_DIVISOR:
+ new_serinfo.custom_divisor = atonum(*arg++);
+ break;
+ case CMD_TYPE:
+ new_serinfo.type = uart_type(*arg++);
+ if (new_serinfo.type < 0) {
+ fprintf(stderr, "Illegal UART type: %s", *--arg);
+ exit(1);
+ }
+ break;
+ case CMD_BASE:
+ new_serinfo.baud_base = atonum(*arg++);
+ break;
+ case CMD_DELAY:
+ new_serinfo.close_delay = atonum(*arg++);
+ break;
+ case CMD_WAIT:
+ if (!strcasecmp(*arg, "infinite"))
+ new_serinfo.closing_wait = ASYNC_CLOSING_WAIT_INF;
+ else if (!strcasecmp(*arg, "none"))
+ new_serinfo.closing_wait = ASYNC_CLOSING_WAIT_NONE;
+ else
+ new_serinfo.closing_wait = atonum(*arg);
+ arg++;
+ break;
+ case CMD_WAIT2:
+ if (!strcasecmp(*arg, "infinite"))
+ new_serinfo.closing_wait2 = ASYNC_CLOSING_WAIT_INF;
+ else if (!strcasecmp(*arg, "none"))
+ new_serinfo.closing_wait2 = ASYNC_CLOSING_WAIT_NONE;
+ else
+ new_serinfo.closing_wait2 = atonum(*arg);
+ arg++;
+ break;
+ case CMD_CONFIG:
+ if (ioctl(fd, TIOCSSERIAL, &new_serinfo) < 0) {
+ perror("Cannot set serial info");
+ exit(1);
+ }
+ if (ioctl(fd, TIOCSERCONFIG) < 0) {
+ perror("Cannot autoconfigure port");
+ exit(1);
+ }
+ if (ioctl(fd, TIOCGSERIAL, &new_serinfo) < 0) {
+ perror("Cannot get serial info");
+ exit(1);
+ }
+ break;
+ case CMD_GETMULTI:
+ if (ioctl(fd, TIOCSSERIAL, &new_serinfo) < 0) {
+ perror("Cannot set serial info");
+ exit(1);
+ }
+ get_multiport(device, fd);
+ break;
+ case CMD_SETMULTI:
+ if (ioctl(fd, TIOCSSERIAL, &new_serinfo) < 0) {
+ perror("Cannot set serial info");
+ exit(1);
+ }
+ set_multiport(device, fd, &arg);
+ break;
+#ifdef TIOCGHAYESESP
+ case CMD_RX_TRIG:
+ case CMD_TX_TRIG:
+ case CMD_FLOW_OFF:
+ case CMD_FLOW_ON:
+ case CMD_RX_TMOUT:
+ case CMD_DMA_CHAN:
+ set_hayesesp(fd, p->cmd, atonum(*arg++));
+ break;
+#endif
+ default:
+ fprintf(stderr, "Internal error: unhandled cmd #%d\n", p->cmd);
+ exit(1);
+ }
+ }
+ if (ioctl(fd, TIOCSSERIAL, &new_serinfo) < 0) {
+ perror("Cannot set serial info");
+ exit(1);
+ }
+ close(fd);
+ if (verbose_flag)
+ get_serial(device);
+}
+
+void do_wild_intr(char *device)
+{
+ int fd;
+ int i, mask;
+ int wild_mask = -1;
+
+ if ((fd = open(device, O_RDWR|O_NONBLOCK)) < 0) {
+ perror(device);
+ exit(1);
+ }
+ if (ioctl(fd, TIOCSERSWILD, &wild_mask) < 0) {
+ perror("Cannot scan for wild interrupts");
+ exit(1);
+ }
+ if (ioctl(fd, TIOCSERGWILD, &wild_mask) < 0) {
+ perror("Cannot get wild interrupt mask");
+ exit(1);
+ }
+ close(fd);
+ if (quiet_flag)
+ return;
+ if (wild_mask) {
+ printf("Wild interrupts found: ");
+ for (i=0, mask=1; mask <= wild_mask; i++, mask <<= 1)
+ if (mask & wild_mask)
+ printf(" %d", i);
+ printf("\n");
+ } else if (verbose_flag)
+ printf("No wild interrupts found.\n");
+ return;
+}
+
+
+
+
+void usage()
+{
+ fprintf(stderr, "%s\n\n", version_str);
+ fprintf(stderr,
+ "usage:\t %s serial-device -abqvVWz [cmd1 [arg]] ... \n",
+ progname);
+ fprintf(stderr, "\t %s -g [-abGv] device1 ...\n\n", progname);
+ fprintf(stderr, "Available commands: (* = Takes an argument)\n");
+ fprintf(stderr, "\t\t(^ = can be preceded by a '^' to turn off the option)\n");
+fprintf(stderr, "\t* port\t\tset the I/O port\n");
+ fprintf(stderr, "\t* irq\t\tset the interrupt\n");
+ fprintf(stderr, "\t* uart\t\tset UART type (none, 8250, 16450, 16550, 16550A,\n");
+ fprintf(stderr, "\t\t\t16650, 16650V2, 16750, 16850, 16950, 16954)\n");
+ fprintf(stderr, "\t* baud_base\tset base baud rate (CLOCK_FREQ / 16)\n");
+ fprintf(stderr, "\t* divisor\tset the custom divisor (see spd_custom)\n");
+ fprintf(stderr, "\t* close_delay\tset the amount of time (in 1/100 of a\n");
+ fprintf(stderr, "\t\t\t\tsecond) that DTR should be kept low\n");
+ fprintf(stderr, "\t\t\t\twhile being closed\n");
+ fprintf(stderr, "\t* closing_wait\tset the amount of time (in 1/100 of a\n");
+ fprintf(stderr, "\t\t\t\tsecond) that the serial port should wait for\n");
+ fprintf(stderr, "\t\t\t\tdata to be drained while being closed.\n");
+ fprintf(stderr, "\t^ fourport\tconfigure the port as an AST Fourport\n");
+ fprintf(stderr, "\t autoconfig\tautomatically configure the serial port\n");
+ fprintf(stderr, "\t^ auto_irq\ttry to determine irq during autoconfiguration\n");
+ fprintf(stderr, "\t^ skip_test\tskip UART test during autoconfiguration\n");
+ fprintf(stderr, "\n");
+ fprintf(stderr, "\t^ sak\t\tset the break key as the Secure Attention Key\n");
+ fprintf(stderr, "\t^ session_lockout Lock out callout port across different sessions\n");
+ fprintf(stderr, "\t^ pgrp_lockout\tLock out callout port across different process groups\n");
+ fprintf(stderr, "\t^ callout_nohup\tDon't hangup the tty when carrier detect drops\n");
+ fprintf(stderr, "\t\t\t\t on the callout device\n");
+ fprintf(stderr, "\t^ split_termios Use separate termios for callout and dailin lines\n");
+ fprintf(stderr, "\t^ hup_notify\tNotify a process blocked on opening a dial in line\n");
+ fprintf(stderr, "\t\t\t\twhen a process has finished using a callout\n");
+ fprintf(stderr, "\t\t\t\tline by returning EAGAIN to the open.\n");
+ fprintf(stderr, "\t^ low_latency\tMinimize receive latency at the cost of greater\n");
+ fprintf(stderr, "\t\t\t\tCPU utilization.\n");
+ fprintf(stderr, "\t get_multiport\tDisplay the multiport configuration\n");
+ fprintf(stderr, "\t set_multiport\tSet the multiport configuration\n");
+ fprintf(stderr, "\n");
+#ifdef TIOCGHAYESESP
+ fprintf(stderr, "\t* rx_trigger\tSet RX trigger level (ESP-only)\n");
+ fprintf(stderr, "\t* tx_trigger\tSet TX trigger level (ESP-only)\n");
+ fprintf(stderr, "\t* flow_off\tSet hardware flow off level (ESP-only)\n");
+ fprintf(stderr, "\t* flow_on\tSet hardware flow on level (ESP-only)\n");
+ fprintf(stderr, "\t* rx_timeout\tSet receive timeout (ESP-only)\n");
+ fprintf(stderr, "\t* dma_channel\tSet DMA channel (ESP-only)\n");
+#endif
+ fprintf(stderr, "\n");
+ fprintf(stderr, "\t spd_hi\tuse 56kb instead of 38.4kb\n");
+ fprintf(stderr, "\t spd_vhi\tuse 115kb instead of 38.4kb\n");
+ fprintf(stderr, "\t spd_shi\tuse 230kb instead of 38.4kb\n");
+ fprintf(stderr, "\t spd_warp\tuse 460kb instead of 38.4kb\n");
+ fprintf(stderr, "\t spd_cust\tuse the custom divisor to set the speed at 38.4kb\n");
+ fprintf(stderr, "\t\t\t\t(baud rate = baud_base / custom_divisor)\n");
+ fprintf(stderr, "\t spd_normal\tuse 38.4kb when a buad rate of 38.4kb is selected\n");
+ fprintf(stderr, "\n");
+ fprintf(stderr, "Use a leading '0x' for hex numbers.\n");
+ fprintf(stderr, "CAUTION: Using an invalid port can lock up your machine!\n");
+ exit(1);
+}
+
+int main(int argc, char **argv)
+{
+ int get_flag = 0, wild_intr_flag = 0;
+ int c;
+ extern int optind;
+ extern char *optarg;
+
+ progname = argv[0];
+ if (argc == 1)
+ usage();
+ while ((c = getopt(argc, argv, "abgGqvVWz")) != EOF) {
+ switch (c) {
+ case 'a':
+ verbosity = 2;
+ break;
+ case 'b':
+ verbosity = 0;
+ break;
+ case 'q':
+ quiet_flag++;
+ break;
+ case 'v':
+ verbose_flag++;
+ break;
+ case 'g':
+ get_flag++;
+ break;
+ case 'G':
+ verbosity = -1;
+ break;
+ case 'V':
+ fprintf(stderr, "%s\n", version_str);
+ exit(0);
+ case 'W':
+ wild_intr_flag++;
+ break;
+ case 'z':
+ zero_flag++;
+ break;
+ default:
+ usage();
+ }
+ }
+ if (get_flag) {
+ argv += optind;
+ while (*argv)
+ get_serial(*argv++);
+ exit(0);
+ }
+ if (argc == optind)
+ usage();
+ if (wild_intr_flag) {
+ do_wild_intr(argv[optind]);
+ exit(0);
+ }
+ if (argc-optind == 1)
+ get_serial(argv[optind]);
+ else
+ set_serial(argv[optind], argv+optind+1);
+ exit(0);
+}
+
Index: setserial-2.17-new
===================================================================
--- setserial-2.17-new (nonexistent)
+++ setserial-2.17-new (revision 5)
Property changes on: setserial-2.17-new
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: .
===================================================================
--- . (nonexistent)
+++ . (revision 5)
Property changes on: .
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,73 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Radix cross Linux
The main Radix cross Linux repository contains the build scripts of packages, which have the most complete and common functionality for desktop machines
452 Commits
2 Branches
1 Tag