Index: iniparser/4.1/Makefile
===================================================================
--- iniparser/4.1/Makefile (nonexistent)
+++ iniparser/4.1/Makefile (revision 334)
@@ -0,0 +1,220 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
+COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/l/iniparser
+
+ifeq ($(__USE_BUILT_GCC_LIBS__),yes)
+REQUIRES = dev/gcc/12.2.0
+else
+REQUIRES = libs/glibc/2.37
+endif
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 4.1
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/iniparser/iniparser-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/iniparser-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = libs
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+INIPARSER_PKG_NAME = iniparser
+INIPARSER_PKG_VERSION = 4.1
+INIPARSER_PKG_ARCH = $(PKGARCH)
+INIPARSER_PKG_DISTRO_NAME = $(DISTRO_NAME)
+INIPARSER_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+INIPARSER_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+INIPARSER_PKG_SHORT_DESCRIPTION = ini file parsing library
+INIPARSER_PKG_URL = $(BUG_URL)
+INIPARSER_PKG_LICENSE = GPLv2
+INIPARSER_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(INIPARSER_PKG_NAME)-pkg-description
+INIPARSER_PKG_DESCRIPTION_FILE_IN = $(INIPARSER_PKG_NAME)-pkg-description.in
+INIPARSER_PKG_INSTALL_SCRIPT = $(INIPARSER_PKG_NAME)-pkg-install.sh
+
+INIPARSER_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(INIPARSER_PKG_NAME)-package
+
+pkg_basename = $(INIPARSER_PKG_NAME)-$(INIPARSER_PKG_VERSION)-$(INIPARSER_PKG_ARCH)-$(INIPARSER_PKG_DISTRO_NAME)-$(INIPARSER_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(INIPARSER_PKG)
+
+
+CFLAGS += -Wno-format-overflow
+
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib/../lib$(LIBSUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_LIB_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @( cd $(SRC_DIR) ; \
+ sed -i 's,^LDFLAGS,#LDFLAGS,' Makefile ; \
+ )
+ @touch $@
+
+$(build_target): $(src_done)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE)
+ @touch $@
+
+$(install_target): $(build_target)
+ # ======= Install: =======
+ @mkdir -p $(INIPARSER_PKG)/usr/include
+ @cp -a $(SRC_DIR)/src/iniparser.h $(SRC_DIR)/src/dictionary.h $(INIPARSER_PKG)/usr/include
+ @mkdir -p $(INIPARSER_PKG)/usr/lib$(LIBSUFFIX)
+ @cp -a $(SRC_DIR)/libiniparser.so.1 $(INIPARSER_PKG)/usr/lib$(LIBSUFFIX)
+ @( cd $(INIPARSER_PKG)/usr/lib$(LIBSUFFIX) ; \
+ ln -sf libiniparser.so.1 libiniparser.so ; \
+ )
+ # ======= Install Documentation =======
+ @if [ -d $(INIPARSER_PKG)/usr/share/man ]; then \
+ ( cd $(INIPARSER_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(INIPARSER_PKG)/usr/doc/iniparser-$(version)
+ @( cd $(SRC_DIR) ; \
+ cp -a AUTHORS LICENSE \
+ $(INIPARSER_PKG)/usr/doc/iniparser-$(version) ; \
+ )
+ @mkdir -p $(INIPARSER_PKG)/usr/share/doc/iniparser-$(version)
+ @( cd $(SRC_DIR) ; \
+ cp -a AUTHORS FAQ-en.md LICENSE INSTALL README.md example html \
+ $(INIPARSER_PKG)/usr/share/doc/iniparser-$(version) ; \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r NEWS ]; then \
+ DOCSDIR=`echo $(INIPARSER_PKG)/usr/share/doc/iniparser-$(version)` ; \
+ cat NEWS | head -n 1000 > $$DOCSDIR/NEWS ; \
+ touch -r NEWS $$DOCSDIR/NEWS ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(INIPARSER_PKG))
+ # ======= Strip binaries =======
+ @( cd $(INIPARSER_PKG) ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ @touch $@
+
+$(INIPARSER_PKG_DESCRIPTION_FILE): $(INIPARSER_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(INIPARSER_PKG_DESCRIPTION_FILE) $(INIPARSER_PKG_INSTALL_SCRIPT)
+ @cp $(INIPARSER_PKG_DESCRIPTION_FILE) $(INIPARSER_PKG)/.DESCRIPTION
+ @cp $(INIPARSER_PKG_INSTALL_SCRIPT) $(INIPARSER_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(INIPARSER_PKG)/.REQUIRES
+ @echo "pkgname=$(INIPARSER_PKG_NAME)" > $(INIPARSER_PKG)/.PKGINFO ; \
+ echo "pkgver=$(INIPARSER_PKG_VERSION)" >> $(INIPARSER_PKG)/.PKGINFO ; \
+ echo "arch=$(INIPARSER_PKG_ARCH)" >> $(INIPARSER_PKG)/.PKGINFO ; \
+ echo "distroname=$(INIPARSER_PKG_DISTRO_NAME)" >> $(INIPARSER_PKG)/.PKGINFO ; \
+ echo "distrover=$(INIPARSER_PKG_DISTRO_VERSION)" >> $(INIPARSER_PKG)/.PKGINFO ; \
+ echo "group=$(INIPARSER_PKG_GROUP)" >> $(INIPARSER_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(INIPARSER_PKG_SHORT_DESCRIPTION)\"" >> $(INIPARSER_PKG)/.PKGINFO ; \
+ echo "url=$(INIPARSER_PKG_URL)" >> $(INIPARSER_PKG)/.PKGINFO ; \
+ echo "license=$(INIPARSER_PKG_LICENSE)" >> $(INIPARSER_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(INIPARSER_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: iniparser/4.1/PATCHES
===================================================================
Index: iniparser/4.1/iniparser-pkg-description.in
===================================================================
--- iniparser/4.1/iniparser-pkg-description.in (nonexistent)
+++ iniparser/4.1/iniparser-pkg-description.in (revision 334)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+iniparser: iniparser @VERSION@ (ini file parsing library)
+iniparser:
+iniparser: iniParser is a simple C library offering ini file parsing services.
+iniparser: The library is pretty small (less than 1500 lines of C) and robust,
+iniparser: and does not depend on any other external library to compile. It is
+iniparser: written in ANSI C and should compile easily on most platforms.
+iniparser:
+iniparser: Homepage: https://github.com/ndevilla/iniparser
+iniparser:
+iniparser:
+iniparser:
Index: iniparser/4.1/iniparser-pkg-install.sh
===================================================================
--- iniparser/4.1/iniparser-pkg-install.sh (nonexistent)
+++ iniparser/4.1/iniparser-pkg-install.sh (revision 334)
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: iniparser/4.1/iniparser-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: iniparser/4.1
===================================================================
--- iniparser/4.1 (nonexistent)
+++ iniparser/4.1 (revision 334)
Property changes on: iniparser/4.1
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: libatasmart/0.19/Makefile
===================================================================
--- libatasmart/0.19/Makefile (nonexistent)
+++ libatasmart/0.19/Makefile (revision 334)
@@ -0,0 +1,272 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
+COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/l/libatasmart
+
+REQUIRES = libs/eudev/3.2.10
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 0.19
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/libatasmart/libatasmart-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/libatasmart-$(version)
+src_dir_name = libatasmart-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = libs
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+ATASMART_PKG_NAME = libatasmart
+ATASMART_PKG_VERSION = 0.19
+ATASMART_PKG_ARCH = $(PKGARCH)
+ATASMART_PKG_DISTRO_NAME = $(DISTRO_NAME)
+ATASMART_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+ATASMART_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+ATASMART_PKG_SHORT_DESCRIPTION = ATA S.M.A.R.T. library
+ATASMART_PKG_URL = $(BUG_URL)
+ATASMART_PKG_LICENSE = LGPLv2.1
+ATASMART_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(ATASMART_PKG_NAME)-pkg-description
+ATASMART_PKG_DESCRIPTION_FILE_IN = $(ATASMART_PKG_NAME)-pkg-description.in
+ATASMART_PKG_INSTALL_SCRIPT = $(ATASMART_PKG_NAME)-pkg-install.sh
+
+ATASMART_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(ATASMART_PKG_NAME)-package
+
+pkg_basename = $(ATASMART_PKG_NAME)-$(ATASMART_PKG_VERSION)-$(ATASMART_PKG_ARCH)-$(ATASMART_PKG_DISTRO_NAME)-$(ATASMART_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(ATASMART_PKG)
+
+
+extra_configure_switches = --libdir=/usr/lib$(LIBSUFFIX)
+extra_configure_switches += --docdir=/usr/share/doc/$(src_dir_name)
+extra_configure_switches += --infodir=/usr/share/info
+extra_configure_switches += --mandir=/usr/share/man
+
+extra_configure_switches += --sysconfdir=/etc
+extra_configure_switches += --localstatedir=/var
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --enable-static=yes
+else
+extra_configure_switches += --enable-static=no
+endif
+extra_configure_switches += --enable-shared=yes
+
+
+extra_environment = CC_FOR_BUILD=gcc
+extra_environment += BUILD_CFLAGS=-I/usr/include
+extra_environment += BUILD_LDFLAGS=-L/usr/lib$(BUILD_MULTILIB_SUFFIX)
+
+
+TARGET_BIN_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX)
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib/../lib$(LIBSUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_BIN_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @cp -a $(CONFIG_GUESS) $(CONFIG_SUB) $(SRC_DIR)/build-aux
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @cd $(build_dir) && \
+ $(BUILD_ENVIRONMENT) $(extra_environment) ../$(src_dir_name)/configure \
+ --prefix=/usr \
+ --build=$(BUILD) \
+ --host=$(TARGET) \
+ $(extra_configure_switches)
+ @( cd $(build_dir)/strpool ; \
+ echo "`pwd`" ; \
+ sed -i 's,^\(CFLAGS =\).*,\1 -I/usr/include,' Makefile ; \
+ sed -i 's,^\(CPP =\).*,\1 gcc -E,' Makefile ; \
+ )
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE)
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(ATASMART_PKG)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(env_sysroot)
+ # ======= Install Documentation =======
+ @if [ -d $(ATASMART_PKG)/usr/share/man ]; then \
+ ( cd $(ATASMART_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(ATASMART_PKG)/usr/doc/$(src_dir_name)
+ @cp -a $(SRC_DIR)/LGPL \
+ $(ATASMART_PKG)/usr/doc/$(src_dir_name)
+ @mkdir -p $(ATASMART_PKG)/usr/share/doc/$(src_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a LGPL README \
+ $(ATASMART_PKG)/usr/share/doc/$(src_dir_name) ; \
+ )
+ # ====== remove toolchain path from target libtool *.la files ======
+ @( cd $(ATASMART_PKG)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libatasmart.la ; \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(ATASMART_PKG))
+ # ======= tune libtool *.la search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libatasmart.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libatasmart.la ; \
+ )
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libatasmart.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(ATASMART_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(ATASMART_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target binaries =======
+ @( cd $(ATASMART_PKG)/usr ; \
+ for file in `find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_BIN_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+ # ======= Set RPATH/RUNPATH for target shared objects =======
+ @( cd $(ATASMART_PKG)/usr/lib$(LIBSUFFIX) ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_LIB_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(ATASMART_PKG_DESCRIPTION_FILE): $(ATASMART_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(ATASMART_PKG_DESCRIPTION_FILE) $(ATASMART_PKG_INSTALL_SCRIPT)
+ @cp $(ATASMART_PKG_DESCRIPTION_FILE) $(ATASMART_PKG)/.DESCRIPTION
+ @cp $(ATASMART_PKG_INSTALL_SCRIPT) $(ATASMART_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(ATASMART_PKG)/.REQUIRES
+ @echo "pkgname=$(ATASMART_PKG_NAME)" > $(ATASMART_PKG)/.PKGINFO ; \
+ echo "pkgver=$(ATASMART_PKG_VERSION)" >> $(ATASMART_PKG)/.PKGINFO ; \
+ echo "arch=$(ATASMART_PKG_ARCH)" >> $(ATASMART_PKG)/.PKGINFO ; \
+ echo "distroname=$(ATASMART_PKG_DISTRO_NAME)" >> $(ATASMART_PKG)/.PKGINFO ; \
+ echo "distrover=$(ATASMART_PKG_DISTRO_VERSION)" >> $(ATASMART_PKG)/.PKGINFO ; \
+ echo "group=$(ATASMART_PKG_GROUP)" >> $(ATASMART_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(ATASMART_PKG_SHORT_DESCRIPTION)\"" >> $(ATASMART_PKG)/.PKGINFO ; \
+ echo "url=$(ATASMART_PKG_URL)" >> $(ATASMART_PKG)/.PKGINFO ; \
+ echo "license=$(ATASMART_PKG_LICENSE)" >> $(ATASMART_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(ATASMART_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: libatasmart/0.19/PATCHES
===================================================================
Index: libatasmart/0.19/libatasmart-pkg-description.in
===================================================================
--- libatasmart/0.19/libatasmart-pkg-description.in (nonexistent)
+++ libatasmart/0.19/libatasmart-pkg-description.in (revision 334)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+libatasmart: libatasmart @VERSION@ (ATA S.M.A.R.T. library)
+libatasmart:
+libatasmart: libatasmart is a lean, small and clean implementation of an ATA
+libatasmart: S.M.A.R.T. ((Self-Monitoring, Analysis and Reporting Technology)
+libatasmart: reading and parsing library. S.M.A.R.T. is a system used by hard
+libatasmart: drives to monitor factors that may impact drive reliability in
+libatasmart: the hope of predicting a drive failure before it occurs.
+libatasmart:
+libatasmart: Homepage: http://0pointer.de/blog/projects/being-smart.html
+libatasmart:
+libatasmart:
Index: libatasmart/0.19/libatasmart-pkg-install.sh
===================================================================
--- libatasmart/0.19/libatasmart-pkg-install.sh (nonexistent)
+++ libatasmart/0.19/libatasmart-pkg-install.sh (revision 334)
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: libatasmart/0.19/libatasmart-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: libatasmart/0.19
===================================================================
--- libatasmart/0.19 (nonexistent)
+++ libatasmart/0.19 (revision 334)
Property changes on: libatasmart/0.19
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: libblockdev/3.0.4/Makefile
===================================================================
--- libblockdev/3.0.4/Makefile (nonexistent)
+++ libblockdev/3.0.4/Makefile (revision 334)
@@ -0,0 +1,335 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
+COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/l/libblockdev
+
+REQUIRES = libs/glib2/2.76.0
+REQUIRES += libs/gobject-introspection/1.76.1
+REQUIRES += dev/vala/0.56.6
+REQUIRES += libs/libbytesize/2.10
+REQUIRES += libs/volume_key/0.3.12
+REQUIRES += libs/keyutils/1.6.3
+REQUIRES += libs/libnvme/1.7.1
+REQUIRES += app/parted/3.6
+REQUIRES += app/ndctl/78
+REQUIRES += app/mdadm/4.1
+REQUIRES += app/cryptsetup/2.6.1
+REQUIRES += app/e2fsprogs/1.46.2
+REQUIRES += app/btrfs-progs/5.15.1
+REQUIRES += app/xfsprogs/5.10.0
+REQUIRES += app/dosfstools/4.2
+REQUIRES += app/lvm2/2.03.11
+REQUIRES += app/kmod/30
+REQUIRES += net/nss/3.93
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 3.0.4
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/libblockdev/libblockdev-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/libblockdev-$(version)
+src_dir_name = libblockdev-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = libs
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+BLOCKDEV_PKG_NAME = libblockdev
+BLOCKDEV_PKG_VERSION = 3.0.4
+BLOCKDEV_PKG_ARCH = $(PKGARCH)
+BLOCKDEV_PKG_DISTRO_NAME = $(DISTRO_NAME)
+BLOCKDEV_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+BLOCKDEV_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+BLOCKDEV_PKG_SHORT_DESCRIPTION = library for manipulating block devices
+BLOCKDEV_PKG_URL = $(BUG_URL)
+BLOCKDEV_PKG_LICENSE = LGPLv2.1
+BLOCKDEV_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(BLOCKDEV_PKG_NAME)-pkg-description
+BLOCKDEV_PKG_DESCRIPTION_FILE_IN = $(BLOCKDEV_PKG_NAME)-pkg-description.in
+BLOCKDEV_PKG_INSTALL_SCRIPT = $(BLOCKDEV_PKG_NAME)-pkg-install.sh
+
+BLOCKDEV_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(BLOCKDEV_PKG_NAME)-package
+
+pkg_basename = $(BLOCKDEV_PKG_NAME)-$(BLOCKDEV_PKG_VERSION)-$(BLOCKDEV_PKG_ARCH)-$(BLOCKDEV_PKG_DISTRO_NAME)-$(BLOCKDEV_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(BLOCKDEV_PKG)
+
+
+extra_configure_switches = --libdir=/usr/lib$(LIBSUFFIX)
+extra_configure_switches += --docdir=/usr/share/doc/$(src_dir_name)
+extra_configure_switches += --mandir=/usr/share/man
+
+extra_configure_switches += --sysconfdir=/etc
+extra_configure_switches += --localstatedir=/var
+
+extra_configure_switches += --enable-introspection=yes
+
+extra_configure_switches += --with-python3=yes
+extra_configure_switches += --enable-debug=no
+extra_configure_switches += --enable-tests=no
+
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --enable-static=yes
+else
+extra_configure_switches += --enable-static=no
+endif
+extra_configure_switches += --enable-shared=yes
+
+
+PYTHON3_VERSION = 3.10
+
+python_environment = PYTHON=$(PYTHON3)
+python_environment += PYTHONPATH='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/gobject-introspection:$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/python$(PYTHON3_VERSION)/lib-dynload'
+
+
+CFLAGS += -Wno-deprecated-declarations -Wno-maybe-uninitialized -Wno-pointer-sign
+CFLAGS += -w -Wno-unused-but-set-variable -Wno-unused-result -Wno-strict-aliasing
+
+TARGET_BIN_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX)
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib/../lib$(LIBSUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_BIN_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @cd $(SRC_DIR) && \
+ $(BUILD_ENVIRONMENT) $(python_environment) ../$(src_dir_name)/configure \
+ --prefix=/usr \
+ --build=$(BUILD) \
+ --host=$(TARGET) \
+ $(extra_configure_switches)
+ @( cd $(SRC_DIR) ; \
+ env -i $(MAKE) $(python_environment) VAPIGEN=/usr/bin/vapigen GIR_EXTRA_LIBS_PATH=../plugins/.libs:../utils/.libs ; \
+ )
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(BLOCKDEV_PKG)
+ @cd $(SRC_DIR) && $(BUILD_ENVIRONMENT) $(MAKE) install $(env_sysroot)
+ @mv $(BLOCKDEV_PKG)/etc/libblockdev/3/conf.d/00-default.cfg{,.new}
+ @mv $(BLOCKDEV_PKG)/etc/libblockdev/3/conf.d/10-lvm-dbus.cfg{,.new}
+ # ======= Install Documentation =======
+ @if [ -d $(BLOCKDEV_PKG)/usr/share/man ]; then \
+ ( cd $(BLOCKDEV_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(BLOCKDEV_PKG)/usr/doc/$(src_dir_name)
+ @cp -a $(SRC_DIR)/LICENSE \
+ $(BLOCKDEV_PKG)/usr/doc/$(src_dir_name)
+ @mkdir -p $(BLOCKDEV_PKG)/usr/share/doc/$(src_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a LICENSE README* \
+ $(BLOCKDEV_PKG)/usr/share/doc/$(src_dir_name) \
+ )
+ @ln -sf ../../gtk-doc/html/libblockdev $(BLOCKDEV_PKG)/usr/share/doc/$(src_dir_name)/html
+ @( cd $(SRC_DIR) ; \
+ if [ -r NEWS.rst ]; then \
+ DOCSDIR=`echo $(BLOCKDEV_PKG)/usr/share/doc/$(src_dir_name)` ; \
+ cat NEWS.rst | head -n 1000 > $$DOCSDIR/NEWS.rst ; \
+ touch -r NEWS.rst $$DOCSDIR/NEWS.rst ; \
+ fi \
+ )
+ # ======= remove toolchain path from target libtool *.la files =======
+ @( cd $(BLOCKDEV_PKG)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,-L./../utils/ ,,g" libbd_btrfs.la libbd_crypto.la \
+ libbd_fs.la libbd_loop.la \
+ libbd_lvm-dbus.la libbd_lvm.la \
+ libbd_mdraid.la libbd_mpath.la \
+ libbd_nvdimm.la libbd_nvme.la \
+ libbd_part.la libbd_swap.la \
+ libbd_utils.la libblockdev.la ; \
+ sed -i "s,-L./../../utils/ ,,g" libbd_btrfs.la libbd_crypto.la \
+ libbd_fs.la libbd_loop.la \
+ libbd_lvm-dbus.la libbd_lvm.la \
+ libbd_mdraid.la libbd_mpath.la \
+ libbd_nvdimm.la libbd_nvme.la \
+ libbd_part.la libbd_swap.la \
+ libbd_utils.la libblockdev.la ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libbd_btrfs.la libbd_crypto.la \
+ libbd_fs.la libbd_loop.la \
+ libbd_lvm-dbus.la libbd_lvm.la \
+ libbd_mdraid.la libbd_mpath.la \
+ libbd_nvdimm.la libbd_nvme.la \
+ libbd_part.la libbd_swap.la \
+ libbd_utils.la libblockdev.la ; \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(BLOCKDEV_PKG))
+ # ======= tune libtool *.la search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libbd_btrfs.la libbd_crypto.la \
+ libbd_fs.la libbd_loop.la \
+ libbd_lvm-dbus.la libbd_lvm.la \
+ libbd_mdraid.la libbd_mpath.la \
+ libbd_nvdimm.la libbd_nvme.la \
+ libbd_part.la libbd_swap.la \
+ libbd_utils.la libblockdev.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libbd_btrfs.la libbd_crypto.la \
+ libbd_fs.la libbd_loop.la \
+ libbd_lvm-dbus.la libbd_lvm.la \
+ libbd_mdraid.la libbd_mpath.la \
+ libbd_nvdimm.la libbd_nvme.la \
+ libbd_part.la libbd_swap.la \
+ libbd_utils.la libblockdev.la ; \
+ )
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
+ sed -i "s,^prefix=/usr,prefix=$(TARGET_DEST_DIR)/usr,g" blockdev-utils.pc blockdev.pc ; \
+ sed -i "s,^libdir=/usr,libdir=$(TARGET_DEST_DIR)/usr,g" blockdev-utils.pc blockdev.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(BLOCKDEV_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(BLOCKDEV_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target binaries =======
+ @( cd $(BLOCKDEV_PKG)/usr/bin ; \
+ for file in `find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_BIN_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+ # ======= Set RPATH/RUNPATH for target shared objects =======
+ @( cd $(BLOCKDEV_PKG)/usr/lib$(LIBSUFFIX) ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_LIB_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(BLOCKDEV_PKG_DESCRIPTION_FILE): $(BLOCKDEV_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(BLOCKDEV_PKG_DESCRIPTION_FILE) $(BLOCKDEV_PKG_INSTALL_SCRIPT)
+ @cp $(BLOCKDEV_PKG_DESCRIPTION_FILE) $(BLOCKDEV_PKG)/.DESCRIPTION
+ @cp $(BLOCKDEV_PKG_INSTALL_SCRIPT) $(BLOCKDEV_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(BLOCKDEV_PKG)/.REQUIRES
+ @echo "pkgname=$(BLOCKDEV_PKG_NAME)" > $(BLOCKDEV_PKG)/.PKGINFO ; \
+ echo "pkgver=$(BLOCKDEV_PKG_VERSION)" >> $(BLOCKDEV_PKG)/.PKGINFO ; \
+ echo "arch=$(BLOCKDEV_PKG_ARCH)" >> $(BLOCKDEV_PKG)/.PKGINFO ; \
+ echo "distroname=$(BLOCKDEV_PKG_DISTRO_NAME)" >> $(BLOCKDEV_PKG)/.PKGINFO ; \
+ echo "distrover=$(BLOCKDEV_PKG_DISTRO_VERSION)" >> $(BLOCKDEV_PKG)/.PKGINFO ; \
+ echo "group=$(BLOCKDEV_PKG_GROUP)" >> $(BLOCKDEV_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(BLOCKDEV_PKG_SHORT_DESCRIPTION)\"" >> $(BLOCKDEV_PKG)/.PKGINFO ; \
+ echo "url=$(BLOCKDEV_PKG_URL)" >> $(BLOCKDEV_PKG)/.PKGINFO ; \
+ echo "license=$(BLOCKDEV_PKG_LICENSE)" >> $(BLOCKDEV_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(BLOCKDEV_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: libblockdev/3.0.4/PATCHES
===================================================================
Index: libblockdev/3.0.4/libblockdev-pkg-description.in
===================================================================
--- libblockdev/3.0.4/libblockdev-pkg-description.in (nonexistent)
+++ libblockdev/3.0.4/libblockdev-pkg-description.in (revision 334)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+libblockdev: libblockdev @VERSION@ (library for manipulating block devices)
+libblockdev:
+libblockdev: libblockdev is a library for manipulating block devices.
+libblockdev:
+libblockdev: Homepage: https://github.com/storaged-project/libblockdev
+libblockdev:
+libblockdev:
+libblockdev:
+libblockdev:
+libblockdev:
+libblockdev:
Index: libblockdev/3.0.4/libblockdev-pkg-install.sh
===================================================================
--- libblockdev/3.0.4/libblockdev-pkg-install.sh (nonexistent)
+++ libblockdev/3.0.4/libblockdev-pkg-install.sh (revision 334)
@@ -0,0 +1,54 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ install_file etc/libblockdev/3/conf.d/00-default.cfg.new
+ install_file etc/libblockdev/3/conf.d/10-lvm-dbus.cfg.new
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: libblockdev/3.0.4/libblockdev-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: libblockdev/3.0.4
===================================================================
--- libblockdev/3.0.4 (nonexistent)
+++ libblockdev/3.0.4 (revision 334)
Property changes on: libblockdev/3.0.4
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: libbytesize/2.10/Makefile
===================================================================
--- libbytesize/2.10/Makefile (nonexistent)
+++ libbytesize/2.10/Makefile (revision 334)
@@ -0,0 +1,262 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
+COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/l/libbytesize
+
+REQUIRES = libs/mpfr/4.1.0
+REQUIRES += libs/pcre2/10.36
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 2.10
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/libbytesize/libbytesize-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/libbytesize-$(version)
+src_dir_name = libbytesize-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = libs
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+BYTESIZE_PKG_NAME = libbytesize
+BYTESIZE_PKG_VERSION = 2.10
+BYTESIZE_PKG_ARCH = $(PKGARCH)
+BYTESIZE_PKG_DISTRO_NAME = $(DISTRO_NAME)
+BYTESIZE_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+BYTESIZE_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+BYTESIZE_PKG_SHORT_DESCRIPTION = library for working with big sizes in bytes
+BYTESIZE_PKG_URL = $(BUG_URL)
+BYTESIZE_PKG_LICENSE = LGPLv2.1
+BYTESIZE_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(BYTESIZE_PKG_NAME)-pkg-description
+BYTESIZE_PKG_DESCRIPTION_FILE_IN = $(BYTESIZE_PKG_NAME)-pkg-description.in
+BYTESIZE_PKG_INSTALL_SCRIPT = $(BYTESIZE_PKG_NAME)-pkg-install.sh
+
+BYTESIZE_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(BYTESIZE_PKG_NAME)-package
+
+pkg_basename = $(BYTESIZE_PKG_NAME)-$(BYTESIZE_PKG_VERSION)-$(BYTESIZE_PKG_ARCH)-$(BYTESIZE_PKG_DISTRO_NAME)-$(BYTESIZE_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(BYTESIZE_PKG)
+
+
+extra_configure_switches = --libdir=/usr/lib$(LIBSUFFIX)
+extra_configure_switches += --docdir=/usr/share/doc/$(src_dir_name)
+extra_configure_switches += --infodir=/usr/share/info
+extra_configure_switches += --mandir=/usr/share/man
+
+extra_configure_switches += --sysconfdir=/etc
+extra_configure_switches += --localstatedir=/var
+
+extra_configure_switches += --with-python3
+extra_configure_switches += --with-gtk-doc=no
+
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --enable-static=yes
+else
+extra_configure_switches += --enable-static=no
+endif
+extra_configure_switches += --enable-shared=yes
+
+
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib/../lib$(LIBSUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_LIB_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @cd $(build_dir) && \
+ $(BUILD_ENVIRONMENT) $(extra_environment) ../$(src_dir_name)/configure \
+ --prefix=/usr \
+ --build=$(BUILD) \
+ --host=$(TARGET) \
+ $(extra_configure_switches)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE)
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(BYTESIZE_PKG)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(env_sysroot)
+ # ======= Install Documentation =======
+ @if [ -d $(BYTESIZE_PKG)/usr/share/man ]; then \
+ ( cd $(BYTESIZE_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(BYTESIZE_PKG)/usr/doc/$(src_dir_name)
+ @cp -a $(SRC_DIR)/LICENSE \
+ $(BYTESIZE_PKG)/usr/doc/$(src_dir_name)
+ @mkdir -p $(BYTESIZE_PKG)/usr/share/doc/$(src_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a LICENSE README.md \
+ $(BYTESIZE_PKG)/usr/share/doc/$(src_dir_name) ; \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r NEWS.rst ]; then \
+ DOCSDIR=`echo $(BYTESIZE_PKG)/usr/share/doc/$(src_dir_name)` ; \
+ cat NEWS.rst | head -n 1000 > $$DOCSDIR/NEWS.rst ; \
+ touch -r NEWS.rst $$DOCSDIR/NEWS.rst ; \
+ fi \
+ )
+ # ====== remove toolchain path from target libtool *.la files ======
+ @( cd $(BYTESIZE_PKG)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libbytesize.la ; \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(BYTESIZE_PKG))
+ # ======= tune libtool *.la search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libbytesize.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libbytesize.la ; \
+ )
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" bytesize.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(BYTESIZE_PKG) ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(BYTESIZE_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target shared objects =======
+ @( cd $(BYTESIZE_PKG)/usr/lib$(LIBSUFFIX) ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_LIB_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(BYTESIZE_PKG_DESCRIPTION_FILE): $(BYTESIZE_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(BYTESIZE_PKG_DESCRIPTION_FILE) $(BYTESIZE_PKG_INSTALL_SCRIPT)
+ @cp $(BYTESIZE_PKG_DESCRIPTION_FILE) $(BYTESIZE_PKG)/.DESCRIPTION
+ @cp $(BYTESIZE_PKG_INSTALL_SCRIPT) $(BYTESIZE_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(BYTESIZE_PKG)/.REQUIRES
+ @echo "pkgname=$(BYTESIZE_PKG_NAME)" > $(BYTESIZE_PKG)/.PKGINFO ; \
+ echo "pkgver=$(BYTESIZE_PKG_VERSION)" >> $(BYTESIZE_PKG)/.PKGINFO ; \
+ echo "arch=$(BYTESIZE_PKG_ARCH)" >> $(BYTESIZE_PKG)/.PKGINFO ; \
+ echo "distroname=$(BYTESIZE_PKG_DISTRO_NAME)" >> $(BYTESIZE_PKG)/.PKGINFO ; \
+ echo "distrover=$(BYTESIZE_PKG_DISTRO_VERSION)" >> $(BYTESIZE_PKG)/.PKGINFO ; \
+ echo "group=$(BYTESIZE_PKG_GROUP)" >> $(BYTESIZE_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(BYTESIZE_PKG_SHORT_DESCRIPTION)\"" >> $(BYTESIZE_PKG)/.PKGINFO ; \
+ echo "url=$(BYTESIZE_PKG_URL)" >> $(BYTESIZE_PKG)/.PKGINFO ; \
+ echo "license=$(BYTESIZE_PKG_LICENSE)" >> $(BYTESIZE_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(BYTESIZE_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: libbytesize/2.10/PATCHES
===================================================================
Index: libbytesize/2.10/libbytesize-pkg-description.in
===================================================================
--- libbytesize/2.10/libbytesize-pkg-description.in (nonexistent)
+++ libbytesize/2.10/libbytesize-pkg-description.in (revision 334)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+libbytesize: libbytesize @VERSION@ (library for working with big sizes in bytes)
+libbytesize:
+libbytesize: libbytesize is a library providing a C class for working with
+libbytesize: arbitrary sizes in bytes.
+libbytesize:
+libbytesize:
+libbytesize:
+libbytesize: Homepage: https://github.com/storaged-project/libbytesize
+libbytesize:
+libbytesize:
+libbytesize:
Index: libbytesize/2.10/libbytesize-pkg-install.sh
===================================================================
--- libbytesize/2.10/libbytesize-pkg-install.sh (nonexistent)
+++ libbytesize/2.10/libbytesize-pkg-install.sh (revision 334)
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: libbytesize/2.10/libbytesize-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: libbytesize/2.10
===================================================================
--- libbytesize/2.10 (nonexistent)
+++ libbytesize/2.10 (revision 334)
Property changes on: libbytesize/2.10
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: libnvme/1.7.1/Makefile
===================================================================
--- libnvme/1.7.1/Makefile (nonexistent)
+++ libnvme/1.7.1/Makefile (revision 334)
@@ -0,0 +1,353 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
+COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/l/libnvme
+
+REQUIRES = dev/python3/3.10.8
+REQUIRES += app/dbus/1.13.18
+REQUIRES += libs/keyutils/1.6.3
+REQUIRES += libs/json-c/0.15
+REQUIRES += net/openssl/1.1.1r
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 1.7.1
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/libnvme/libnvme-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/libnvme-$(version)
+src_dir_name = libnvme-$(version)
+doc_dir_name = libnvme-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+build_docs_dir = $(TARGET_BUILD_DIR)/build-docs
+
+cross_file = $(TARGET_BUILD_DIR)/$(TARGET)-cross
+
+
+####### Targets
+
+PKG_GROUP = libs
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+LIBNVME_PKG_NAME = libnvme
+LIBNVME_PKG_VERSION = 1.7.1
+LIBNVME_PKG_ARCH = $(PKGARCH)
+LIBNVME_PKG_DISTRO_NAME = $(DISTRO_NAME)
+LIBNVME_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+LIBNVME_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+LIBNVME_PKG_SHORT_DESCRIPTION = NVMe development C library
+LIBNVME_PKG_URL = $(BUG_URL)
+LIBNVME_PKG_LICENSE = LGPLv2.1
+LIBNVME_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(LIBNVME_PKG_NAME)-pkg-description
+LIBNVME_PKG_DESCRIPTION_FILE_IN = $(LIBNVME_PKG_NAME)-pkg-description.in
+LIBNVME_PKG_INSTALL_SCRIPT = $(LIBNVME_PKG_NAME)-pkg-install.sh
+
+LIBNVME_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(LIBNVME_PKG_NAME)-package
+
+pkg_basename = $(LIBNVME_PKG_NAME)-$(LIBNVME_PKG_VERSION)-$(LIBNVME_PKG_ARCH)-$(LIBNVME_PKG_DISTRO_NAME)-$(LIBNVME_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(LIBNVME_PKG)
+
+
+#
+# https://mesonbuild.com/Reference-tables.html :
+# =============================================
+#
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_A1X_GLIBC) $(TOOLCHAIN_A2X_GLIBC) \
+ $(TOOLCHAIN_H3_GLIBC) $(TOOLCHAIN_RK328X_GLIBC) \
+ $(TOOLCHAIN_S8XX_GLIBC) $(TOOLCHAIN_IMX6_GLIBC) \
+ $(TOOLCHAIN_AM335X_GLIBC) $(TOOLCHAIN_OMAP543X_GLIBC)),)
+cpu_name = arm
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_H5_GLIBC) $(TOOLCHAIN_RK33XX_GLIBC) \
+ $(TOOLCHAIN_RK339X_GLIBC) $(TOOLCHAIN_RK358X_GLIBC) \
+ $(TOOLCHAIN_S9XX_GLIBC) \
+ $(TOOLCHAIN_A311X_GLIBC) $(TOOLCHAIN_M1000_GLIBC)),)
+cpu_name = aarch64
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_JZ47XX_GLIBC) $(TOOLCHAIN_P5600_GLIBC)),)
+cpu_name = mips
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_POWER8_GLIBC) $(TOOLCHAIN_POWER9_GLIBC)),)
+cpu_name = ppc64
+endian = big
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_POWER8LE_GLIBC) $(TOOLCHAIN_POWER9LE_GLIBC)),)
+cpu_name = ppc64
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_RISCV64_GLIBC)),)
+cpu_name = riscv64
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_I586_GLIBC) $(TOOLCHAIN_I686_GLIBC)),)
+cpu_name = x86
+endian = little
+endif
+ifneq ($(filter $(TOOLCHAIN),$(TOOLCHAIN_X86_64_GLIBC)),)
+cpu_name = x86_64
+endian = little
+endif
+
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --default-library=both
+else
+extra_configure_switches += --default-library=shared
+endif
+
+
+extra_configure_switches += -Dversion-tag=''
+extra_configure_switches += -Dhtmldir=''
+extra_configure_switches += -Drstdir=''
+
+extra_configure_switches += -Ddocs=man
+extra_configure_switches += -Ddocs-build=true
+extra_configure_switches += -Dtests=false
+
+extra_configure_switches += -Dpython=enabled
+extra_configure_switches += -Dopenssl=enabled
+extra_configure_switches += -Dlibdbus=enabled
+extra_configure_switches += -Djson-c=enabled
+extra_configure_switches += -Dkeyutils=enabled
+
+
+PYTHON3_VERSION = 3.10
+
+python_environment = PYTHON=$(PYTHON3)
+python_environment += PYTHONPATH='$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/gobject-introspection:$(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/python$(PYTHON3_VERSION)/lib-dynload'
+
+
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib/../lib$(LIBSUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_LIB_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @echo "" > $(cross_file)
+ @echo "[build_machine]" >> $(cross_file)
+ @echo "system = '$(shell uname -s | tr 'L' 'l')'" >> $(cross_file)
+ @echo "cpu_family = '$(shell uname -m)'" >> $(cross_file)
+ @echo "cpu = '$(shell uname -m)'" >> $(cross_file)
+ @echo "endian = '$(shell lscpu | grep Endian | tr -s ' ' | cut -f3 -d' ' | tr 'L' 'l')'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @echo "[host_machine]" >> $(cross_file)
+ @echo "system = 'linux'" >> $(cross_file)
+ @echo "cpu_family = '$(cpu_name)'" >> $(cross_file)
+ @echo "cpu = '$(cpu_name)'" >> $(cross_file)
+ @echo "endian = '$(endian)'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @echo "[target_machine]" >> $(cross_file)
+ @echo "system = 'linux'" >> $(cross_file)
+ @echo "cpu_family = '$(cpu_name)'" >> $(cross_file)
+ @echo "cpu = '$(cpu_name)'" >> $(cross_file)
+ @echo "endian = '$(endian)'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @echo "[binaries]" >> $(cross_file)
+ @echo "c = '$(TOOLCHAIN_PATH)/bin/$(TARGET)-gcc'" >> $(cross_file)
+ @echo "cpp = '$(TOOLCHAIN_PATH)/bin/$(TARGET)-g++'" >> $(cross_file)
+ @echo "ar = '$(AR)'" >> $(cross_file)
+ @echo "strip = '$(STRIP)'" >> $(cross_file)
+ @echo "pkgconfig = 'pkg-config'" >> $(cross_file)
+ @echo "" >> $(cross_file)
+ @$(python_environment) \
+ meson setup \
+ --prefix=/usr \
+ --libdir=lib$(LIBSUFFIX) \
+ --libexecdir=/usr/libexec \
+ --bindir=/usr/bin \
+ --sbindir=/usr/sbin \
+ --includedir=/usr/include \
+ --datadir=/usr/share \
+ --mandir=/usr/share/man \
+ --sysconfdir=/etc \
+ --localstatedir=/var \
+ --buildtype=release \
+ -Dc_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(CFLAGS)" | tr -s ' '`" \
+ -Dc_link_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(LDFLAGS)" | tr -s ' '`" \
+ -Dcpp_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(CFLAGS)" | tr -s ' '`" \
+ -Dcpp_link_args="`echo -n "--sysroot=$(TARGET_DEST_DIR) $(LDFLAGS)" | tr -s ' '`" \
+ $(extra_configure_switches) \
+ --cross-file=$(cross_file) $(SRC_DIR) $(build_dir)
+ @cd $(build_dir) && ninja -v
+ @touch $@
+
+$(install_target): $(build_target)
+ @cd $(build_dir) && $(env_sysroot) ninja install
+ # ======= Install Documentation =======
+ @if [ -d $(LIBNVME_PKG)/usr/share/man ]; then \
+ ( cd $(LIBNVME_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(LIBNVME_PKG)/usr/doc/$(doc_dir_name)
+ @cp -a $(SRC_DIR)/COPYING \
+ $(LIBNVME_PKG)/usr/doc/$(doc_dir_name)
+ @mkdir -p $(LIBNVME_PKG)/usr/share/doc/$(doc_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a COPYING README.md \
+ $(LIBNVME_PKG)/usr/share/doc/$(doc_dir_name) \
+ )
+ # ======= Install ChangeLog file =======
+ @( cd $(SRC_DIR) ; \
+ if [ -r NEWS ]; then \
+ DOCSDIR=`echo $(LIBNVME_PKG)/usr/share/doc/$(doc_dir_name)` ; \
+ cat NEWS | head -n 1000 > $$DOCSDIR/NEWS ; \
+ touch -r NEWS $$DOCSDIR/NEWS ; \
+ fi \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(LIBNVME_PKG))
+ # ======= tune pkg-config *.pc search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/pkgconfig ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libnvme-mi.pc libnvme.pc ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(LIBNVME_PKG) ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(LIBNVME_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target shared objects =======
+ @( cd $(LIBNVME_PKG)/usr/lib$(LIBSUFFIX) ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_LIB_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(LIBNVME_PKG_DESCRIPTION_FILE): $(LIBNVME_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(LIBNVME_PKG_DESCRIPTION_FILE) $(LIBNVME_PKG_INSTALL_SCRIPT)
+ @cp $(LIBNVME_PKG_DESCRIPTION_FILE) $(LIBNVME_PKG)/.DESCRIPTION
+ @cp $(LIBNVME_PKG_INSTALL_SCRIPT) $(LIBNVME_PKG)/.INSTALL
+ @chmod a+x $(LIBNVME_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(LIBNVME_PKG)/.REQUIRES
+ @echo "pkgname=$(LIBNVME_PKG_NAME)" > $(LIBNVME_PKG)/.PKGINFO ; \
+ echo "pkgver=$(LIBNVME_PKG_VERSION)" >> $(LIBNVME_PKG)/.PKGINFO ; \
+ echo "arch=$(LIBNVME_PKG_ARCH)" >> $(LIBNVME_PKG)/.PKGINFO ; \
+ echo "distroname=$(LIBNVME_PKG_DISTRO_NAME)" >> $(LIBNVME_PKG)/.PKGINFO ; \
+ echo "distrover=$(LIBNVME_PKG_DISTRO_VERSION)" >> $(LIBNVME_PKG)/.PKGINFO ; \
+ echo "group=$(LIBNVME_PKG_GROUP)" >> $(LIBNVME_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(LIBNVME_PKG_SHORT_DESCRIPTION)\"" >> $(LIBNVME_PKG)/.PKGINFO ; \
+ echo "url=$(LIBNVME_PKG_URL)" >> $(LIBNVME_PKG)/.PKGINFO ; \
+ echo "license=$(LIBNVME_PKG_LICENSE)" >> $(LIBNVME_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(LIBNVME_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: libnvme/1.7.1/PATCHES
===================================================================
Index: libnvme/1.7.1/libnvme-pkg-description.in
===================================================================
--- libnvme/1.7.1/libnvme-pkg-description.in (nonexistent)
+++ libnvme/1.7.1/libnvme-pkg-description.in (revision 334)
@@ -0,0 +1,20 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+libnvme: libnvme @VERSION@ (NVMe development C library)
+libnvme:
+libnvme: libnvme provides type definitions for NVMe specification
+libnvme: structures, enumerations, and bit fields, helper functions
+libnvme: to construct, dispatch, and decode commands and payloads,
+libnvme: and utilities to connect, scan, and manage nvme devices
+libnvme: on a Linux system.
+libnvme:
+libnvme: Sources: https://github.com/linux-nvme/libnvme
+libnvme:
+libnvme:
+
Index: libnvme/1.7.1/libnvme-pkg-install.sh
===================================================================
--- libnvme/1.7.1/libnvme-pkg-install.sh (nonexistent)
+++ libnvme/1.7.1/libnvme-pkg-install.sh (revision 334)
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: libnvme/1.7.1/libnvme-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: libnvme/1.7.1
===================================================================
--- libnvme/1.7.1 (nonexistent)
+++ libnvme/1.7.1 (revision 334)
Property changes on: libnvme/1.7.1
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Index: volume_key/0.3.12/Makefile
===================================================================
--- volume_key/0.3.12/Makefile (nonexistent)
+++ volume_key/0.3.12/Makefile (revision 334)
@@ -0,0 +1,305 @@
+
+COMPONENT_TARGETS = $(HARDWARE_INTEL_PC32)
+COMPONENT_TARGETS += $(HARDWARE_INTEL_PC64)
+COMPONENT_TARGETS += $(HARDWARE_EBOX_3350DX2)
+COMPONENT_TARGETS += $(HARDWARE_CB1X)
+COMPONENT_TARGETS += $(HARDWARE_CB2X)
+COMPONENT_TARGETS += $(HARDWARE_CB3X)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP2E)
+COMPONENT_TARGETS += $(HARDWARE_NANOPI_NEO)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PP)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PL2)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5B)
+COMPONENT_TARGETS += $(HARDWARE_ORANGE_PI5P)
+COMPONENT_TARGETS += $(HARDWARE_ROCK_5B)
+COMPONENT_TARGETS += $(HARDWARE_WECHIP_TX6)
+COMPONENT_TARGETS += $(HARDWARE_REPKA_PI3)
+COMPONENT_TARGETS += $(HARDWARE_FFRK3288)
+COMPONENT_TARGETS += $(HARDWARE_POIN2)
+COMPONENT_TARGETS += $(HARDWARE_RK3328_CC)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_EDGE)
+COMPONENT_TARGETS += $(HARDWARE_LEEZ_P710)
+COMPONENT_TARGETS += $(HARDWARE_M201)
+COMPONENT_TARGETS += $(HARDWARE_MXV)
+COMPONENT_TARGETS += $(HARDWARE_P201)
+COMPONENT_TARGETS += $(HARDWARE_NEXBOX_A95X)
+COMPONENT_TARGETS += $(HARDWARE_ODROID_C2)
+COMPONENT_TARGETS += $(HARDWARE_P212)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM)
+COMPONENT_TARGETS += $(HARDWARE_Q201)
+COMPONENT_TARGETS += $(HARDWARE_ENYBOX_X2)
+COMPONENT_TARGETS += $(HARDWARE_KHADAS_VIM2)
+COMPONENT_TARGETS += $(HARDWARE_NIT6Q)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6DL_C)
+COMPONENT_TARGETS += $(HARDWARE_OKMX6Q_C)
+COMPONENT_TARGETS += $(HARDWARE_BONE_BLACK)
+COMPONENT_TARGETS += $(HARDWARE_OMAP5UEVM)
+COMPONENT_TARGETS += $(HARDWARE_DRA7XXEVM)
+COMPONENT_TARGETS += $(HARDWARE_CI20)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_T1)
+COMPONENT_TARGETS += $(HARDWARE_BAIKAL_M1)
+COMPONENT_TARGETS += $(HARDWARE_S824L)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN)
+COMPONENT_TARGETS += $(HARDWARE_S824L_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VESNIN_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2)
+COMPONENT_TARGETS += $(HARDWARE_TL2WK2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_TL2SV2_LSB)
+COMPONENT_TARGETS += $(HARDWARE_VISIONFIVE2)
+COMPONENT_TARGETS += $(HARDWARE_SIFIVE_U740)
+
+
+NEED_ABS_PATH = true
+COMPONENT_IS_3PP = true
+
+
+include ../../../build-system/constants.mk
+
+
+SOURCE_REQUIRES = sources/packages/l/volume_key
+
+REQUIRES = app/util-linux/2.38.1
+REQUIRES += app/cryptsetup/2.6.1
+REQUIRES += libs/glib2/2.76.0
+REQUIRES += net/gpgme/1.16.0
+REQUIRES += net/nss/3.93
+REQUIRES += dev/swig/4.0.2
+
+# ======= __END_OF_REQUIRES__ =======
+
+
+version = 0.3.12
+tar_xz_archive = $(SRC_PACKAGE_PATH)/packages/l/volume_key/volume_key-$(version).tar.xz
+SRC_ARCHIVE = $(tar_xz_archive)
+SRC_DIR = $(TARGET_BUILD_DIR)/volume_key-$(version)
+src_dir_name = volume_key-$(version)
+src_done = $(TARGET_BUILD_DIR)/.source_done
+
+PATCHES = PATCHES
+
+build_dir = $(TARGET_BUILD_DIR)/build
+build_target = $(TARGET_BUILD_DIR)/.build_done
+install_target = $(TARGET_BUILD_DIR)/.install_done
+
+
+####### Targets
+
+PKG_GROUP = libs
+
+#
+# *PKG_NAME & *PKG_VERSION shouldn't be a reference to value.
+#
+VOLUME_KEY_PKG_NAME = volume_key
+VOLUME_KEY_PKG_VERSION = 0.3.12
+VOLUME_KEY_PKG_ARCH = $(PKGARCH)
+VOLUME_KEY_PKG_DISTRO_NAME = $(DISTRO_NAME)
+VOLUME_KEY_PKG_DISTRO_VERSION = $(DISTRO_VERSION)
+VOLUME_KEY_PKG_GROUP = $(PKG_GROUP)
+### |---handy-ruler-------------------------------|
+VOLUME_KEY_PKG_SHORT_DESCRIPTION = manipulate storage keys
+VOLUME_KEY_PKG_URL = $(BUG_URL)
+VOLUME_KEY_PKG_LICENSE = GPLv2
+VOLUME_KEY_PKG_DESCRIPTION_FILE = $(TARGET_BUILD_DIR)/$(VOLUME_KEY_PKG_NAME)-pkg-description
+VOLUME_KEY_PKG_DESCRIPTION_FILE_IN = $(VOLUME_KEY_PKG_NAME)-pkg-description.in
+VOLUME_KEY_PKG_INSTALL_SCRIPT = $(VOLUME_KEY_PKG_NAME)-pkg-install.sh
+
+VOLUME_KEY_PKG = $(CURDIR)/$(TARGET_BUILD_DIR)/$(VOLUME_KEY_PKG_NAME)-package
+
+pkg_basename = $(VOLUME_KEY_PKG_NAME)-$(VOLUME_KEY_PKG_VERSION)-$(VOLUME_KEY_PKG_ARCH)-$(VOLUME_KEY_PKG_DISTRO_NAME)-$(VOLUME_KEY_PKG_DISTRO_VERSION)
+
+pkg_archive = $(TARGET_BUILD_DIR)/$(PKG_GROUP)/$(pkg_basename).$(pkg_arch_suffix)
+pkg_certificate = $(call cert-name,$(pkg_archive))
+pkg_signature = $(call sign-name,$(pkg_archive))
+pkg_description = $(call desc-name,$(pkg_archive))
+products = $(call pkg-files,$(pkg_archive))
+
+BUILD_TARGETS = $(build_target)
+BUILD_TARGETS += $(install_target)
+
+PRODUCT_TARGETS = $(products)
+
+ROOTFS_TARGETS = $(pkg_archive)
+
+
+include ../../../build-system/core.mk
+
+
+env_sysroot = DESTDIR=$(VOLUME_KEY_PKG)
+
+
+extra_configure_switches = --libdir=/usr/lib$(LIBSUFFIX)
+extra_configure_switches += --docdir=/usr/share/doc/$(src_dir_name)
+extra_configure_switches += --infodir=/usr/share/info
+extra_configure_switches += --mandir=/usr/share/man
+
+extra_configure_switches += --sysconfdir=/etc
+extra_configure_switches += --localstatedir=/var
+
+extra_configure_switches += --with-gpgme-prefix=$(TARGET_DEST_DIR)/usr
+extra_configure_switches += --with-python3
+extra_configure_switches += --with-python
+
+
+ifeq ($(__ENABLE_STATIC__),yes)
+extra_configure_switches += --enable-static=yes
+else
+extra_configure_switches += --enable-static=no
+endif
+extra_configure_switches += --enable-shared=yes
+
+
+PYTHON2_VERSION = 2.7
+PYTHON3_VERSION = 3.10
+
+
+CFLAGS += -Wno-deprecated-declarations -Wno-cast-function-type -Wno-shadow
+CFLAGS += -Wno-missing-field-initializers -Wno-discarded-qualifiers
+
+TARGET_BIN_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX)
+TARGET_LIB_RPATH = /lib$(LIBSUFFIX):/usr/lib$(LIBSUFFIX):/usr/lib/../lib$(LIBSUFFIX)
+
+LDFLAGS += -Wl,-rpath,$(TARGET_BIN_RPATH)
+
+
+####### Dependencies
+
+$(src_done): $(SRC_ARCHIVE) $(PATCHES_DEP)
+ $(UNPACK_SRC_ARCHIVE)
+ $(APPLY_PATCHES)
+ @cp -a $(CONFIG_GUESS) $(CONFIG_SUB) $(SRC_DIR)/admin
+ @touch $@
+
+$(build_target): $(src_done)
+ @mkdir -p $(build_dir)
+ @cd $(build_dir) && \
+ $(BUILD_ENVIRONMENT) ../$(src_dir_name)/configure \
+ --prefix=/usr \
+ --build=$(BUILD) \
+ --host=$(TARGET) \
+ $(extra_configure_switches)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE)
+ @touch $@
+
+$(install_target): $(build_target)
+ @mkdir -p $(VOLUME_KEY_PKG)
+ @cd $(build_dir) && $(BUILD_ENVIRONMENT) $(MAKE) -j1 install $(env_sysroot)
+ # ======= Install Documentation =======
+ @if [ -d $(VOLUME_KEY_PKG)/usr/share/man ]; then \
+ ( cd $(VOLUME_KEY_PKG)/usr/share/man ; \
+ for manpagedir in `find . -type d -name "man*"` ; do \
+ ( cd $$manpagedir ; \
+ for eachpage in `find . -type l -maxdepth 1` ; do \
+ ln -s `readlink $$eachpage`.gz $$eachpage.gz ; \
+ rm $$eachpage ; \
+ done ; \
+ gzip -9 *.? ; \
+ ) \
+ done \
+ ) \
+ fi
+ @mkdir -p $(VOLUME_KEY_PKG)/usr/doc/$(src_dir_name)
+ @cp -a $(SRC_DIR)/AUTHORS $(SRC_DIR)/COPYING \
+ $(VOLUME_KEY_PKG)/usr/doc/$(src_dir_name)
+ @mkdir -p $(VOLUME_KEY_PKG)/usr/share/doc/$(src_dir_name)
+ @( cd $(SRC_DIR) ; \
+ cp -a AUTHORS COPYING INSTALL README \
+ $(VOLUME_KEY_PKG)/usr/share/doc/$(src_dir_name) ; \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r ChangeLog ]; then \
+ DOCSDIR=`echo $(VOLUME_KEY_PKG)/usr/share/doc/$(src_dir_name)` ; \
+ cat ChangeLog | head -n 1000 > $$DOCSDIR/ChangeLog ; \
+ touch -r ChangeLog $$DOCSDIR/ChangeLog ; \
+ fi \
+ )
+ @( cd $(SRC_DIR) ; \
+ if [ -r NEWS ]; then \
+ DOCSDIR=`echo $(VOLUME_KEY_PKG)/usr/share/doc/$(src_dir_name)` ; \
+ cat NEWS | head -n 1000 > $$DOCSDIR/NEWS ; \
+ touch -r NEWS $$DOCSDIR/NEWS ; \
+ fi \
+ )
+ # ====== remove toolchain path from target libtool *.la files ======
+ @( cd $(VOLUME_KEY_PKG)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" libvolume_key.la ; \
+ )
+ @( cd $(VOLUME_KEY_PKG)/usr/lib$(LIBSUFFIX)/python$(PYTHON2_VERSION)/site-packages ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" _volume_key.la ; \
+ sed -i "s,$(BUILDSYSTEM),,g" _volume_key.la ; \
+ )
+ @( cd $(VOLUME_KEY_PKG)/usr/lib$(LIBSUFFIX)/python$(PYTHON3_VERSION)/site-packages ; \
+ sed -i "s,$(TARGET_DEST_DIR),,g" _volume_key.la ; \
+ sed -i "s,$(BUILDSYSTEM),,g" _volume_key.la ; \
+ )
+ # ======= Install the same to $(TARGET_DEST_DIR) =======
+ $(call install-into-devenv, $(VOLUME_KEY_PKG))
+ # ======= tune libtool *.la search path to the target destination for development =======
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX) ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" libvolume_key.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" libvolume_key.la ; \
+ )
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/python$(PYTHON2_VERSION)/site-packages ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" _volume_key.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" _volume_key.la ; \
+ )
+ @( cd $(TARGET_DEST_DIR)/usr/lib$(LIBSUFFIX)/python$(PYTHON3_VERSION)/site-packages ; \
+ sed -i "s,/usr,$(TARGET_DEST_DIR)/usr,g" _volume_key.la ; \
+ sed -i "s,L/lib,L$(TARGET_DEST_DIR)/lib,g" _volume_key.la ; \
+ )
+ # ======= Strip binaries =======
+ @( cd $(VOLUME_KEY_PKG) ; \
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs $(STRIP) --strip-unneeded 2> /dev/null ; \
+ )
+ifeq ($(__ENABLE_STATIC__),yes)
+ @( cd $(VOLUME_KEY_PKG) ; \
+ find . | xargs file | grep "current ar archive" | cut -f 1 -d : | xargs $(STRIP) -g 2> /dev/null ; \
+ )
+endif
+ifneq ($(PATCHELF),)
+ # ======= Set RPATH/RUNPATH for target binaries =======
+ @( cd $(VOLUME_KEY_PKG)/usr/bin ; \
+ for file in `find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_BIN_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+ # ======= Set RPATH/RUNPATH for target shared objects =======
+ @( cd $(VOLUME_KEY_PKG)/usr/lib$(LIBSUFFIX) ; \
+ for file in `find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs echo` ; do \
+ rpath=`$(PATCHELF) --print-rpath $$file 2> /dev/null` ; \
+ if echo "$$rpath" | grep -q "$(TARGET_DEST_DIR)" ; then \
+ $(PATCHELF) --set-rpath $(TARGET_LIB_RPATH) $$file 1> /dev/null 2> /dev/null ; \
+ fi ; \
+ done ; \
+ )
+endif
+ @touch $@
+
+$(VOLUME_KEY_PKG_DESCRIPTION_FILE): $(VOLUME_KEY_PKG_DESCRIPTION_FILE_IN)
+ @cat $< | $(SED) -e "s/@VERSION@/$(version)/g" > $@
+
+$(pkg_certificate) : $(pkg_archive) ;
+$(pkg_signature) : $(pkg_archive) ;
+$(pkg_description) : $(pkg_archive) ;
+
+$(pkg_archive): $(install_target) $(VOLUME_KEY_PKG_DESCRIPTION_FILE) $(VOLUME_KEY_PKG_INSTALL_SCRIPT)
+ @cp $(VOLUME_KEY_PKG_DESCRIPTION_FILE) $(VOLUME_KEY_PKG)/.DESCRIPTION
+ @cp $(VOLUME_KEY_PKG_INSTALL_SCRIPT) $(VOLUME_KEY_PKG)/.INSTALL
+ @$(BUILD_PKG_REQUIRES) $(VOLUME_KEY_PKG)/.REQUIRES
+ @echo "pkgname=$(VOLUME_KEY_PKG_NAME)" > $(VOLUME_KEY_PKG)/.PKGINFO ; \
+ echo "pkgver=$(VOLUME_KEY_PKG_VERSION)" >> $(VOLUME_KEY_PKG)/.PKGINFO ; \
+ echo "arch=$(VOLUME_KEY_PKG_ARCH)" >> $(VOLUME_KEY_PKG)/.PKGINFO ; \
+ echo "distroname=$(VOLUME_KEY_PKG_DISTRO_NAME)" >> $(VOLUME_KEY_PKG)/.PKGINFO ; \
+ echo "distrover=$(VOLUME_KEY_PKG_DISTRO_VERSION)" >> $(VOLUME_KEY_PKG)/.PKGINFO ; \
+ echo "group=$(VOLUME_KEY_PKG_GROUP)" >> $(VOLUME_KEY_PKG)/.PKGINFO ; \
+ echo "short_description=\"$(VOLUME_KEY_PKG_SHORT_DESCRIPTION)\"" >> $(VOLUME_KEY_PKG)/.PKGINFO ; \
+ echo "url=$(VOLUME_KEY_PKG_URL)" >> $(VOLUME_KEY_PKG)/.PKGINFO ; \
+ echo "license=$(VOLUME_KEY_PKG_LICENSE)" >> $(VOLUME_KEY_PKG)/.PKGINFO
+ @$(PSEUDO) sh -c "cd $(VOLUME_KEY_PKG) && \
+ chown -R root:root . && \
+ $(MAKE_PACKAGE) -J --linkadd=yes $(GNUPG_OPTIONS) -m -d .. ."
Index: volume_key/0.3.12/PATCHES
===================================================================
Index: volume_key/0.3.12/volume_key-pkg-description.in
===================================================================
--- volume_key/0.3.12/volume_key-pkg-description.in (nonexistent)
+++ volume_key/0.3.12/volume_key-pkg-description.in (revision 334)
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+volume_key: volume_key @VERSION@ (manipulate storage keys)
+volume_key:
+volume_key: The volume_key package provides a libvolume_key, a library
+volume_key: for manipulating storage volume encryption keys and storing
+volume_key: them separately from volumes, and an associated command-line
+volume_key: tool named volume_key.
+volume_key:
+volume_key: Homepage: https://pagure.io/volume_key/
+volume_key:
+volume_key:
+volume_key:
Index: volume_key/0.3.12/volume_key-pkg-install.sh
===================================================================
--- volume_key/0.3.12/volume_key-pkg-install.sh (nonexistent)
+++ volume_key/0.3.12/volume_key-pkg-install.sh (revision 334)
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# Preserve new files
+install_file() {
+ NEW="$1"
+ OLD="`dirname $NEW`/`basename $NEW .new`"
+ # If there's no file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+
+# arg 1: the new package version
+pre_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+post_install() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_update() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_update() {
+ post_install
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+
+operation=$1
+shift
+
+$operation $*
Property changes on: volume_key/0.3.12/volume_key-pkg-install.sh
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: volume_key/0.3.12
===================================================================
--- volume_key/0.3.12 (nonexistent)
+++ volume_key/0.3.12 (revision 334)
Property changes on: volume_key/0.3.12
___________________________________________________________________
Added: svn:ignore
## -0,0 +1,74 ##
+
+# install dir
+dist
+
+# Target build dirs
+.a1x-newlib
+.a2x-newlib
+.at91sam7s-newlib
+
+.build-machine
+
+.a1x-glibc
+.a2x-glibc
+.h3-glibc
+.h5-glibc
+.i586-glibc
+.i686-glibc
+.imx6-glibc
+.jz47xx-glibc
+.makefile
+.am335x-glibc
+.omap543x-glibc
+.p5600-glibc
+.power8-glibc
+.power8le-glibc
+.power9-glibc
+.power9le-glibc
+.m1000-glibc
+.riscv64-glibc
+.rk328x-glibc
+.rk33xx-glibc
+.rk339x-glibc
+.rk358x-glibc
+.s8xx-glibc
+.s9xx-glibc
+.x86_64-glibc
+
+# Hidden files (each file)
+.makefile
+.dist
+.rootfs
+
+# src & hw requires
+.src_requires
+.src_requires_depend
+.requires
+.requires_depend
+
+# Tarballs
+*.gz
+*.bz2
+*.lz
+*.xz
+*.tgz
+*.txz
+
+# Signatures
+*.asc
+*.sig
+*.sign
+*.sha1sum
+
+# Patches
+*.patch
+
+# Descriptions
+*.dsc
+*.txt
+
+# Default linux config files
+*.defconfig
+
+# backup copies
+*~
Radix cross Linux
The main Radix cross Linux repository contains the build scripts of packages, which have the most complete and common functionality for desktop machines
452 Commits
2 Branches
1 Tag